arch: arm: boot: Add AD4052 dts for Coraz7s

The AD4052 CNV pin is driven by a GPIO for single shot readings and
by a PWM for buffer readings.
The functional-mode entry allows to set Sample Mode (0) or Burst
Averaging Mode (1).
During runtime, it is possible to enter Trigger Mode through IIO Events.

Signed-off-by: Jorge Marques <jorge.marques@analog.com>

Author: gastmaier

arch/arm/boot/dts/zynq-coraz7s-ad4052.dts

@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices AD405x
+ *
+ * hdl_project: <ad4052_ardz/coraz7s>
+ *
+ * Copyright (C) 2024 Analog Devices Inc.
+ */
+
+/dts-v1/;
+#include "zynq-coraz7s.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&fpga_axi {
+	rx_dma: rx-dmac@44a30000 {
+		compatible = "adi,axi-dmac-1.00.a";
+		reg = <0x44a30000 0x1000>;
+		#dma-cells = <1>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clkc 15>;
+	};
+
+	spi_clk: axi-clkgen@44a70000 {
+		compatible = "adi,axi-clkgen-2.00.a";
+		reg = <0x44a70000 0x10000>;
+		#clock-cells = <0>;
+		clocks = <&clkc 15>, <&clkc 15>;
+		clock-names = "s_axi_aclk", "clkin1";
+		clock-output-names = "spi_clk";
+	};
+
+	adc_trigger: pwm@44b00000 {
+		compatible = "adi,axi-pwmgen-2.00.a";
+		reg = <0x44b00000 0x1000>;
+		label = "ad4052_cnv";
+		#pwm-cells = <2>;
+		clocks = <&spi_clk>;
+	};
+
+	axi_spi_engine: spi@44a00000 {
+		compatible = "adi-ex,axi-spi-engine-1.00.a";
+		reg = <0x44a00000 0x1FF>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clkc 15>, <&spi_clk>;
+		clock-names = "s_axi_aclk", "spi_clk";
+		num-cs = <1>;
+
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		ad4052: ad4052@0 {
+			compatible = "adi,ad4052";
+			reg = <0>;
+			spi-max-frequency = <25000000>;
+			clocks = <&spi_clk>;
+			clock-names = "ref_clk";
+			dmas = <&rx_dma 0>;
+			dma-names = "rx";
+			pwm-names = "cnv";
+			pwms = <&adc_trigger 0 0>;
+			cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 58 IRQ_TYPE_EDGE_RISING>;
+
+			adi,functional-mode = <0>;
+		};
+	};
+};