Update READMEs with VIO info for pulsar_adc

Author: mandrica

projects/pulsar_adc/README.md

@@ -3,6 +3,7 @@
 - Evaluation boards product page: [EVAL-AD400x-FMCZ](https://www.analog.com/eval-ad400x-fmcz) (with-MC) and [EVAL-ADAQ40xx](https://www.analog.com/eval-adaq40xx) (with PMOD)
 - System documentation: https://wiki.analog.com/resources/eval/10-lead-pulsar-adc-evaluation-board
 - HDL project documentation: http://analogdevicesinc.github.io/hdl/projects/pulsar_adc/index.html
+- Evaluation board VIO: 3.3V
 
 ## Supported parts
 

projects/pulsar_adc/coraz7s/README.md

@@ -1,5 +1,9 @@
+<!-- no_build_example -->
+
 # PULSAR-ADC/CoraZ7S HDL Project
 
+- VIO with which it was tested in hardware: 3.3V
+
 ## Building the project
 
 :warning: Make sure that you set up your required ADC resolution in [../common/pulsar_adc_bd.tcl](../common/pulsar_adc_bd.tcl)
@@ -16,3 +20,5 @@ Corresponding device trees:
 - [zynq-coraz7s-ad7946.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7946.dts)
 - [zynq-coraz7s-ad7984.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-coraz7s-ad7984.dts)
 - [zynq-coraz7s-adaq4003.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-coraz7s-adaq4003.dts)
+
+Corresponding no-OS project: [pulsar_adc](https://github.com/analogdevicesinc/no-OS/tree/main/drivers/adc/pulsar_adc)

projects/pulsar_adc/zed/README.md

@@ -2,6 +2,8 @@
 
 ## Building the project
 
+- VIO with which it was tested in hardware: 3.3V
+
 :warning: Make sure that you set up your required ADC resolution in [../common/pulsar_adc_bd.tcl](../common/pulsar_adc_bd.tcl)
 
 The parameters configurable through the `make` command, can be found below, as well as in the **system_project.tcl** file; it contains the default configuration.
@@ -39,3 +41,5 @@ make AD40XX_ADAQ400X_N=0
 ```
 
 Corresponding device tree: [zynq-zed-adv7511-adaq4003.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-zed-adv7511-adaq4003.dts)
+
+Corresponding no-OS project: [pulsar_adc](https://github.com/analogdevicesinc/no-OS/tree/main/drivers/adc/pulsar_adc)