Fourwire change

Author: FoamyGuy

CircuitPython_ESP32_Camera/esp32-kaluga-onionskin-gif/code.py

@@ -52,6 +52,7 @@
 import board
 import busio
 import bitmaptools
+import fourwire
 import displayio
 import sdcardio
 import storage
@@ -68,7 +69,7 @@ def record_pressed():
 
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,

CircuitPython_Flying_Toasters/code.py

@@ -21,6 +21,7 @@
 from random import seed, randint
 import board
 import displayio
+import fourwire
 from adafruit_st7789 import ST7789
 import adafruit_imageload
 
@@ -63,7 +64,7 @@ def make_display():
     spi.configure(baudrate=24000000)  # Configure SPI for 24MHz
     spi.unlock()
     displayio.release_displays()
-    display_bus = displayio.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
+    display_bus = fourwire.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
 
     return ST7789(display_bus, width=240, height=240, rowstart=80, auto_refresh=True)
 

CircuitPython_Knob_Sketcher/feather_sketcher/code.py

@@ -9,6 +9,7 @@
 import time
 import board
 import displayio
+import fourwire
 import digitalio
 import analogio
 import adafruit_ili9341
@@ -55,7 +56,7 @@
 tft_cs = board.D9
 tft_dc = board.D10
 tft_rst = board.D6
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=tft_dc, chip_select=tft_cs, reset=tft_rst
 )
 display = adafruit_ili9341.ILI9341(display_bus, width=DISPLAY_WIDTH, height=DISPLAY_HEIGHT)

CircuitPython_Scrolling_Clouds/code.py

@@ -21,6 +21,7 @@
 from random import seed, randint
 import board
 import displayio
+import fourwire
 from adafruit_st7789 import ST7789
 import adafruit_imageload
 
@@ -54,7 +55,7 @@ def make_display():
     spi.unlock()
 
     displayio.release_displays()
-    display_bus = displayio.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
+    display_bus = fourwire.FourWire(spi, command=board.D7, chip_select=board.D10, reset=board.D9)
 
     return ST7789(display_bus, width=240, height=240, rowstart=80, auto_refresh=True)
 

CircuitPython_displayio/displayio_display_driver/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import fourwire
 import adafruit_ili9341
 
 # Release any previously configured displays
@@ -17,7 +18,7 @@
 tft_dc = board.D9
 
 # Setup the display bus
-display_bus = displayio.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
+display_bus = fourwire.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
 
 # Setup the Display
 display = adafruit_ili9341.ILI9341(display_bus, width=320, height=240)

CircuitPython_displayio/displayio_display_manual/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import fourwire
 
 # Release any previously configured displays
 displayio.release_displays()
@@ -16,7 +17,7 @@
 tft_dc = board.D9
 
 # Setup the display bus
-display_bus = displayio.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
+display_bus = fourwire.FourWire(spi_bus, command=tft_dc, chip_select=tft_cs)
 
 # Setup the initialization sequence
 # stolen from adafruit_ili9341.py

CircuitPython_qrio/adafruit_io/code.py

@@ -15,6 +15,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import qrio
 import socketpool
 import wifi
@@ -30,7 +31,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=board.LCD_D_C, chip_select=board.LCD_CS, reset=board.LCD_RST
 )
 display = ILI9341(display_bus, width=320, height=240, rotation=90)

CircuitPython_qrio/repl/code.py

@@ -12,6 +12,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import qrio
 import adafruit_ov2640
 from adafruit_display_text.bitmap_label import Label
@@ -20,7 +21,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=board.LCD_D_C, chip_select=board.LCD_CS, reset=board.LCD_RST
 )
 display = ILI9341(display_bus, width=320, height=240, rotation=90)

CircuitPython_qrio/usb_hid/code.py

@@ -13,6 +13,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import qrio
 import adafruit_ov2640
 from adafruit_display_text.bitmap_label import Label
@@ -24,7 +25,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=board.LCD_D_C, chip_select=board.LCD_CS, reset=board.LCD_RST
 )
 display = ILI9341(display_bus, width=320, height=240, rotation=90)

Circuit_Playground_O_Phonor/notes_tft/code.py

@@ -8,6 +8,7 @@
 import busio
 import audiobusio
 import displayio
+import fourwire
 from adafruit_st7789 import ST7789
 from adafruit_bitmap_font import bitmap_font
 from adafruit_display_text import label
@@ -46,7 +47,7 @@
 tft_dc = board.TX
 tft_backlight = board.A3
 
-display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs)
+display_bus = fourwire.FourWire(spi, command=tft_dc, chip_select=tft_cs)
 
 display = ST7789(display_bus, width=240, height=240, rowstart=80,
                  backlight_pin=tft_backlight, rotation=180)

EInk_CircuitPython_Quickstart/213_tricolor_eink_fw_badge/code.py

@@ -17,6 +17,7 @@
 import time
 import board
 import displayio
+import fourwire
 import adafruit_il0373
 import terminalio
 from adafruit_display_text import label
@@ -43,7 +44,7 @@
 epd_busy = board.D6
 
 # Create the displayio connection to the display pins
-display_bus = displayio.FourWire(spi, command=epd_dc, chip_select=epd_cs,
+display_bus = fourwire.FourWire(spi, command=epd_dc, chip_select=epd_cs,
                                  reset=epd_reset, baudrate=1000000)
 time.sleep(1)  # Wait a bit
 

EInk_CircuitPython_Quickstart/213_tricolor_eink_fw_text/code.py

@@ -18,6 +18,7 @@
 import time
 import board
 import displayio
+import fourwire
 import adafruit_il0373
 import terminalio
 from adafruit_display_text import label
@@ -44,7 +45,7 @@
 epd_busy = board.D6
 
 # Create the displayio connection to the display pins
-display_bus = displayio.FourWire(spi, command=epd_dc, chip_select=epd_cs,
+display_bus = fourwire.FourWire(spi, command=epd_dc, chip_select=epd_cs,
                                  reset=epd_reset, baudrate=1000000)
 time.sleep(1)  # Wait a bit
 

EInk_CircuitPython_Quickstart/27_tricolor_eink_shield_badge/code.py

@@ -16,6 +16,7 @@
 import time
 import board
 import displayio
+import fourwire
 import adafruit_il91874
 import terminalio
 from adafruit_display_text import label
@@ -39,7 +40,7 @@
 epd_dc = board.D9
 
 # Create the displayio connection to the display pins
-display_bus = displayio.FourWire(spi, command=epd_dc, chip_select=epd_cs,
+display_bus = fourwire.FourWire(spi, command=epd_dc, chip_select=epd_cs,
                                  baudrate=1000000)
 time.sleep(1)  # Wait a bit
 

EInk_CircuitPython_Quickstart/27_tricolor_eink_shield_text/code.py

@@ -15,6 +15,7 @@
 import time
 import board
 import displayio
+import fourwire
 import adafruit_il91874
 import terminalio
 from adafruit_display_text import label
@@ -38,7 +39,7 @@
 epd_dc = board.D9
 
 # Create the displayio connection to the display pins
-display_bus = displayio.FourWire(spi, command=epd_dc, chip_select=epd_cs,
+display_bus = fourwire.FourWire(spi, command=epd_dc, chip_select=epd_cs,
                                  baudrate=1000000)
 time.sleep(1)  # Wait a bit
 

EYESPI_BFF/CircuitPython_EYESPI_BFF/code.py

@@ -10,6 +10,7 @@
 from random import randint
 import time
 import displayio
+import fourwire
 import board
 import vectorio
 import terminalio
@@ -29,7 +30,7 @@
 tft_cs = board.TX
 tft_dc = board.RX
 
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=tft_dc, chip_select=tft_cs, reset=None
 )
 

Faderwave_Synth/code.py

@@ -13,6 +13,7 @@
 import rotaryio
 from digitalio import DigitalInOut, Pull
 import displayio
+import fourwire
 from adafruit_display_text import label
 from adafruit_display_shapes.rect import Rect
 import terminalio
@@ -88,7 +89,7 @@
 OLED_CS = board.D11
 
 spi = board.SPI()
-display_bus = displayio.FourWire(spi, command=OLED_DC, chip_select=OLED_CS,
+display_bus = fourwire.FourWire(spi, command=OLED_DC, chip_select=OLED_CS,
                                  reset=OLED_RST, baudrate=30_000_000)
 display = adafruit_displayio_ssd1306.SSD1306(display_bus, width=128, height=64)
 

Feather_RP2040_ThinkInk_Examples/CircuitPython_ACeP_Example/code.py

@@ -8,6 +8,7 @@
 
 import board
 import displayio
+import fourwire
 import busio
 import adafruit_spd1656
 
@@ -19,7 +20,7 @@
 epd_dc = board.EPD_DC
 epd_reset = board.EPD_RESET
 epd_busy = board.EPD_BUSY
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=epd_dc, chip_select=epd_cs, reset=epd_reset, baudrate=1000000
 )
 

Feather_RP2040_ThinkInk_Examples/CircuitPython_Tri-Color_Example/code.py

@@ -9,6 +9,7 @@
 import time
 import board
 import displayio
+import fourwire
 import busio
 import adafruit_ssd1680
 
@@ -20,7 +21,7 @@
 epd_dc = board.EPD_DC
 epd_reset = board.EPD_RESET
 epd_busy = board.EPD_BUSY
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=epd_dc, chip_select=epd_cs, reset=epd_reset, baudrate=1000000
 )
 time.sleep(1)

Kitty_Paw_Keypad/code.py

@@ -4,6 +4,7 @@
 
 import board
 import displayio
+import fourwire
 import keypad
 from adafruit_st7789 import ST7789
 import adafruit_imageload
@@ -50,7 +51,7 @@
 tft_cs = board.D7
 tft_dc = board.D5
 
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi, command=tft_dc, chip_select=tft_cs, reset=board.D6
 )
 

OV5640_Breakout/CircuitPython_Kaluga-jpeg/code.py

@@ -25,6 +25,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import espcamera
 import espidf
 import keypad
@@ -34,7 +35,7 @@
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,

OV5640_Breakout/CircuitPython_Kaluga-lcd-mirror/code.py

@@ -19,13 +19,14 @@
 import busio
 import keypad
 import displayio
+import fourwire
 import espcamera
 import espidf
 
 print("Initializing display")
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,

OV5640_Breakout/CircuitPython_Pico-lcd-mirror/code.py

@@ -13,11 +13,12 @@
 import adafruit_ov5640
 import adafruit_st7789
 import displayio
+import fourwire
 
 # Set up the display (You must customize this block for your display!)
 displayio.release_displays()
 spi = busio.SPI(clock=board.GP2, MOSI=board.GP3)
-display_bus = displayio.FourWire(spi, command=board.GP0, chip_select=board.GP1, reset=None)
+display_bus = fourwire.FourWire(spi, command=board.GP0, chip_select=board.GP1, reset=None)
 display = adafruit_st7789.ST7789(display_bus, width=240, height=240, rowstart=80, rotation=0)
 
 print("construct bus")

Pi_SSD_Media_Server/display-info.py

@@ -4,6 +4,7 @@
 import subprocess
 import board
 import displayio
+import fourwire
 from adafruit_display_text import label
 from adafruit_bitmap_font import bitmap_font
 from adafruit_st7789 import ST7789
@@ -23,7 +24,7 @@
 tft_dc = board.D25
 tft_rst = board.D24
 
-display_bus = displayio.FourWire(spi, command=tft_dc, chip_select=tft_cs, reset=tft_rst)
+display_bus = fourwire.FourWire(spi, command=tft_dc, chip_select=tft_cs, reset=tft_rst)
 
 display = ST7789(display_bus, width=320, height=170, colstart=35, rotation=270)