FAQ

• What speed can I expect with a Raspberry PI 3 B ?

On my own tests, about 85.5Mb/s using modems connected via the ethernet port. The port is limited to 100Mb/s.

On a RPI3B+, with default settings, speed is limited to about 150Mb/s (due to CPU capacity).

• How many interfaces can be used for MPTCP ?

The path-manager does not support more than 8 addresses per host.

• Inactive TCP session are killed/SSH timeout after 2 minutes

For SSH, you can modify ServerAliveInterval in ssh configuration. You can also increase IPv4 TCP Keepalive time in the menu System->OpenMPTCProuter->Advanced Settings.

• How to use OpenMPTCProuter on another platform?

Follow Create image for unsupported platform

• Status say that Multipath is blocked on the connection, what can I do?

MPTCP is filtered somewhere on the network, so you can't use it. You can disable ShadowSocks and enable Glorytun UDP or MLVPN, they don't use MPTCP and can aggregate connection.

• I can't get IPv6 on my OVH VPS, why ?

Check that IPv6 is configured on the VPS. If not follow this doc: https://docs.ovh.com/fr/public-cloud/configurer-ipv6/

• I don't get a good speed, what can I check ?

  • Check that your VPS have a bandwidth greater than the connections you want to aggregate.
  • Check that all CPU is not used on OpenMPTCProuter, you can use htop command with SSH
  • Check that all CPU is not used on the VPS side, you can install htop apt-get install htop and use it
  • Check each wan speed, using on the router via SSH: omr-test-speed wan1 (where wan1 is the real interface you wan to test), Ctrl+C to stop after at least 2 minutes.

• How to get system log on the router via SSH ?

You can get them with the command: logread