How to BLE+CAN for Solis Inverter

[Baker0052]

Which YAML should i use to read the JKBMS via BLE and send the data to the Inverter via CAN?

[Uksa007]

Hi,

There is no support for BLE.
Once connected the inverter needs reliable data, BLE is not as reliable as using a hardware serial connection.
I use the GPS port on the JK-BMS to receive the data.

I have a Hardware interface kit that has all the required hardware to connect to the BMS and the inverter.

Regards

[lucize]

@Baker0052 ,@Uksa007 having issues with serial port I tested this, removed
and seems to be ok but the SOC isnot ok, I have to verify a bit more about this, despite esphome shows me the correct value, my deye sees it 100%
I use a mcp2515

[Uksa007]

Sorry I don't support BLE.

BLE is not suitable to use, the CAN connection to the inverter becomes part of the battery safety system, using BLE is unpredictable, data may be corrupted, or missing due to interference etc.

Not sure how much clearer I can be BLE IS NOT SUITABLE AND NOT SUPPORTED, use a serial cable connection to the BMS!!!!!!!!!!!!!!!