[ETH01-EVO POE] compilation problem with DM9051 Ethernet component

[Imanol82]

Hello!

I'm making a new version of the yambms to put inside the box I printed in 3D.
I have already soldered all the wires and when I start to compile the yambms.yaml that I have running to install it on this new board I get this error.
What am I doing wrong?

Thank you very much!!

[Sleeper85]

The problem comes from the import of the external component, some things have changed but I don't know what.

external_components:
  - source: github://pr#6861
    components:
      - ethernet

esphome/esphome#6861

[Imanol82]

I've remake all with the old esp32 eth01.
It works because it had de firmware installed. I can't update but it works.

I'll investigate what has changed.

The result:

Thanks!!

[Imanol82]

Hello my friend. I don't know why my answer has disappeared...

Yesterday after last update... boooom! hahaha

Comunication between Deye, YamBMS and BMSs work fine, but I can't see nothing in HA! hahaha

(forget the middle area, I have been working on the installation and the battery has been disassembled)

How angry it is when things break due to updating... hahaha

Thanks my friend and sorry for being so annoying.

[Sleeper85]

home-assistant/supervisor#5405

What is your HA server version?

I read that there are issues with the latest version.

Can you completely remove your ESP32 and its entities from HA.

Do a clean build before compiling again?

PS: the new YamBMS 1.5.1 version will be released soon.

[Imanol82]

Yes, I've updated...

To install it, I copy the folder to the esphome folder, modify the yaml you mentioned in a previous conversation (for the ethernet) and change the general yaml to 1.4.5. And that's what I compile and install again. This is not correct?

[Sleeper85]

To install it, I copy the folder to the esphome folder, modify the yaml you mentioned in a previous conversation (for the ethernet) and change the general yaml to 1.4.5. And that's what I compile and install again. This is not correct?

Yes

[Sleeper85]

From my reading it seems that the version of HA you have installed is currently causing problems.

[Sleeper85]

From my reading it seems that the version of HA you have installed is currently causing problems.

[Imanol82]

Ok. I'll wait them.
Without HA YamBMS continue working so it's ok tonwait.

As always, thank you very much

[Imanol82]

Hello @Sleeper85 , I'm back!

I'll try again you project. Txubelaxu's one works fine but as all of us, I can't be without trying things hehe.

One suggestion, as your esp32 project used to be installed near the inverter, don't you think good idea to use 2 more GPIOs to use a PWM fans for example? For inverter or for the batteries... But i think this is something usefull.

I'm doing on a separate esp32 to.control 48v pwm fans but maybe is interestig to merge in your code...

Thanks!!

[Sleeper85]

What code are you currently using for PWM fans ?

[Imanol82]

This:

substitutions:
  settings_skipped_updates: "30"
  devicename: "deye_fan"

  #FAN Blue Cable TACH (normalmente amarillo)
  pulse_counter_1: GPIO00 
  pulse_counter_2: GPIO18
  pulse_counter_3: GPIO19

  #FAN Yellow Cable PWM (normalmente azul)
  output: GPIO04

esphome:
  name: $devicename

esp32:
  board: esp32-c3-devkitm-1
# currently needed, but not in the future
  variant: esp32c3
  framework:
    type: esp-idf
    version: latest

# Enable logging
logger:
  baud_rate: 0

# Enable Home Assistant API
api:
  encryption:
    key: 

ota:
  - platform: esphome
    password: 

external_components:
  - source: github://pr#6861
    components:
      - ethernet
    refresh: 1d

ethernet:
  type: DM9051
  clk_pin: GPIO07
  mosi_pin: GPIO10
  miso_pin: GPIO03
  cs_pin: GPIO09
  interrupt_pin: GPIO08
  reset_pin: GPIO06
  clock_speed: 20MHz
  manual_ip:
    static_ip: 192.168.178.111
    gateway: 192.168.178.1
    subnet: 255.255.255.0
    dns1: 192.168.178.1

    
################################################ FAN CONTROL ############################################


sensor:

  - platform: pulse_counter
    pin: 
      number: $pulse_counter_1
      mode:
        input: true
        pullup: true
    name: "Deye Fan 1 RPM"
    id: deye_fan_1_rpm
    update_interval: 1s
    unit_of_measurement: "RPM"
    filters:
      - multiply: 0.5

  - platform: pulse_counter
    pin: 
      number: $pulse_counter_2
      mode:
        input: true
        pullup: true
    name: "Deye Fan 2 RPM"
    id: deye_fan_2_rpm
    update_interval: 1s
    unit_of_measurement: "RPM"
    filters:
      - multiply: 0.5

  - platform: pulse_counter
    pin: 
      number: $pulse_counter_3
      mode:
        input: true
        pullup: true
    name: "Deye Fan 3 RPM"
    id: deye_fan_3_rpm
    update_interval: 1s
    unit_of_measurement: "RPM"
    filters:
      - multiply: 0.5

output:

  - platform: ledc
    pin: $output
    id: fan_pwm_raw
    frequency: 25000Hz

  - platform: template
    id: fan_pwm
    type: float
    write_action:
      lambda: |-
        if (state == 0) {
          id(fan_pwm_raw).set_level(0);
        } else {
          // Mapea de 0-1 al rango 0.13-1.0
          float real_state = 0.13 + (state * (1.0 - 0.13));
          id(fan_pwm_raw).set_level(real_state);
        }

fan:

  - platform: speed
    name: "Deye Fan"
    id: deye_fan
    output: fan_pwm
    restore_mode: RESTORE_DEFAULT_ON