From 9b82d26954a7b75b9ff7390aa8dac54aa0265e79 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 6 Jan 2023 15:54:21 +0100 Subject: [PATCH 01/49] added STM32CubeMX generated project for STM32H7A3 --- Demo_Project_H7A3/.cproject | 173 + Demo_Project_H7A3/.project | 32 + Demo_Project_H7A3/Core/Inc/gpio.h | 49 + Demo_Project_H7A3/Core/Inc/main.h | 69 + .../Core/Inc/stm32h7xx_hal_conf.h | 510 + Demo_Project_H7A3/Core/Inc/stm32h7xx_it.h | 66 + Demo_Project_H7A3/Core/Src/gpio.c | 57 + Demo_Project_H7A3/Core/Src/main.c | 205 + .../Core/Src/stm32h7xx_hal_msp.c | 80 + Demo_Project_H7A3/Core/Src/stm32h7xx_it.c | 203 + Demo_Project_H7A3/Core/Src/syscalls.c | 176 + Demo_Project_H7A3/Core/Src/sysmem.c | 79 + Demo_Project_H7A3/Core/Src/system_stm32h7xx.c | 450 + .../Core/Startup/startup_stm32h7a3zitxq.s | 742 + Demo_Project_H7A3/Custom_Loader.ioc | 206 + .../ST/STM32H7xx/Include/stm32h7a3xxq.h | 22573 ++++++++++++++++ .../Device/ST/STM32H7xx/Include/stm32h7xx.h | 301 + .../ST/STM32H7xx/Include/system_stm32h7xx.h | 103 + .../Drivers/CMSIS/Include/cmsis_armcc.h | 894 + .../Drivers/CMSIS/Include/cmsis_armclang.h | 1444 + .../CMSIS/Include/cmsis_armclang_ltm.h | 1891 ++ .../Drivers/CMSIS/Include/cmsis_compiler.h | 283 + .../Drivers/CMSIS/Include/cmsis_gcc.h | 2168 ++ .../Drivers/CMSIS/Include/cmsis_iccarm.h | 964 + .../Drivers/CMSIS/Include/cmsis_version.h | 39 + .../Drivers/CMSIS/Include/core_armv81mml.h | 2968 ++ .../Drivers/CMSIS/Include/core_armv8mbl.h | 1921 ++ .../Drivers/CMSIS/Include/core_armv8mml.h | 2835 ++ .../Drivers/CMSIS/Include/core_cm0.h | 952 + .../Drivers/CMSIS/Include/core_cm0plus.h | 1085 + .../Drivers/CMSIS/Include/core_cm1.h | 979 + .../Drivers/CMSIS/Include/core_cm23.h | 1996 ++ .../Drivers/CMSIS/Include/core_cm3.h | 1937 ++ .../Drivers/CMSIS/Include/core_cm33.h | 2910 ++ .../Drivers/CMSIS/Include/core_cm35p.h | 2910 ++ .../Drivers/CMSIS/Include/core_cm4.h | 2124 ++ .../Drivers/CMSIS/Include/core_cm7.h | 2725 ++ .../Drivers/CMSIS/Include/core_sc000.h | 1025 + .../Drivers/CMSIS/Include/core_sc300.h | 1912 ++ .../Drivers/CMSIS/Include/mpu_armv7.h | 272 + .../Drivers/CMSIS/Include/mpu_armv8.h | 346 + .../Drivers/CMSIS/Include/tz_context.h | 70 + .../Inc/Legacy/stm32_hal_legacy.h | 4027 +++ .../STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h | 1185 + .../Inc/stm32h7xx_hal_cortex.h | 459 + .../Inc/stm32h7xx_hal_def.h | 220 + .../Inc/stm32h7xx_hal_dma.h | 1333 + .../Inc/stm32h7xx_hal_dma_ex.h | 310 + .../Inc/stm32h7xx_hal_exti.h | 537 + .../Inc/stm32h7xx_hal_flash.h | 861 + .../Inc/stm32h7xx_hal_flash_ex.h | 1013 + .../Inc/stm32h7xx_hal_gpio.h | 359 + .../Inc/stm32h7xx_hal_gpio_ex.h | 487 + .../Inc/stm32h7xx_hal_hsem.h | 211 + .../Inc/stm32h7xx_hal_i2c.h | 839 + .../Inc/stm32h7xx_hal_i2c_ex.h | 175 + .../Inc/stm32h7xx_hal_mdma.h | 868 + .../Inc/stm32h7xx_hal_ospi.h | 1075 + .../Inc/stm32h7xx_hal_pwr.h | 809 + .../Inc/stm32h7xx_hal_pwr_ex.h | 789 + .../Inc/stm32h7xx_hal_rcc.h | 8266 ++++++ .../Inc/stm32h7xx_hal_rcc_ex.h | 4482 +++ .../Inc/stm32h7xx_hal_tim.h | 2462 ++ .../Inc/stm32h7xx_hal_tim_ex.h | 533 + .../Inc/stm32h7xx_ll_bus.h | 6914 +++++ .../Inc/stm32h7xx_ll_cortex.h | 669 + .../Inc/stm32h7xx_ll_crs.h | 780 + .../Inc/stm32h7xx_ll_dma.h | 3287 +++ .../Inc/stm32h7xx_ll_dmamux.h | 2436 ++ .../Inc/stm32h7xx_ll_exti.h | 3285 +++ .../Inc/stm32h7xx_ll_gpio.h | 984 + .../Inc/stm32h7xx_ll_hsem.h | 902 + .../Inc/stm32h7xx_ll_pwr.h | 2301 ++ .../Inc/stm32h7xx_ll_rcc.h | 6404 +++++ .../Inc/stm32h7xx_ll_system.h | 2442 ++ .../Inc/stm32h7xx_ll_utils.h | 401 + .../STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c | 1311 + .../Src/stm32h7xx_hal_cortex.c | 531 + .../Src/stm32h7xx_hal_dma.c | 2062 ++ .../Src/stm32h7xx_hal_dma_ex.c | 712 + .../Src/stm32h7xx_hal_exti.c | 859 + .../Src/stm32h7xx_hal_flash.c | 1201 + .../Src/stm32h7xx_hal_flash_ex.c | 1860 ++ .../Src/stm32h7xx_hal_gpio.c | 555 + .../Src/stm32h7xx_hal_hsem.c | 447 + .../Src/stm32h7xx_hal_i2c.c | 7268 +++++ .../Src/stm32h7xx_hal_i2c_ex.c | 372 + .../Src/stm32h7xx_hal_mdma.c | 1899 ++ .../Src/stm32h7xx_hal_ospi.c | 3165 +++ .../Src/stm32h7xx_hal_pwr.c | 873 + .../Src/stm32h7xx_hal_pwr_ex.c | 2142 ++ .../Src/stm32h7xx_hal_rcc.c | 1814 ++ .../Src/stm32h7xx_hal_rcc_ex.c | 3935 +++ .../Src/stm32h7xx_hal_tim.c | 7908 ++++++ .../Src/stm32h7xx_hal_tim_ex.c | 2947 ++ Demo_Project_H7A3/STM32H7A3ZITXQ_FLASH.ld | 175 + Demo_Project_H7A3/STM32H7A3ZITXQ_RAM.ld | 174 + 97 files changed, 167039 insertions(+) create mode 100644 Demo_Project_H7A3/.cproject create mode 100644 Demo_Project_H7A3/.project create mode 100644 Demo_Project_H7A3/Core/Inc/gpio.h create mode 100644 Demo_Project_H7A3/Core/Inc/main.h create mode 100644 Demo_Project_H7A3/Core/Inc/stm32h7xx_hal_conf.h create mode 100644 Demo_Project_H7A3/Core/Inc/stm32h7xx_it.h create mode 100644 Demo_Project_H7A3/Core/Src/gpio.c create mode 100644 Demo_Project_H7A3/Core/Src/main.c create mode 100644 Demo_Project_H7A3/Core/Src/stm32h7xx_hal_msp.c create mode 100644 Demo_Project_H7A3/Core/Src/stm32h7xx_it.c create mode 100644 Demo_Project_H7A3/Core/Src/syscalls.c create mode 100644 Demo_Project_H7A3/Core/Src/sysmem.c create mode 100644 Demo_Project_H7A3/Core/Src/system_stm32h7xx.c create mode 100644 Demo_Project_H7A3/Core/Startup/startup_stm32h7a3zitxq.s create mode 100644 Demo_Project_H7A3/Custom_Loader.ioc create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7a3xxq.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Device/ST/STM32H7xx/Include/system_stm32h7xx.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armcc.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang_ltm.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_compiler.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_gcc.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_iccarm.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_version.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv81mml.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mbl.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mml.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0plus.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm1.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm23.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm3.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm33.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm35p.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm4.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm7.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc000.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc300.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv7.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv8.h create mode 100644 Demo_Project_H7A3/Drivers/CMSIS/Include/tz_context.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ospi.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c create mode 100644 Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c create mode 100644 Demo_Project_H7A3/STM32H7A3ZITXQ_FLASH.ld create mode 100644 Demo_Project_H7A3/STM32H7A3ZITXQ_RAM.ld diff --git a/Demo_Project_H7A3/.cproject b/Demo_Project_H7A3/.cproject new file mode 100644 index 0000000..bf3b7d8 --- /dev/null +++ b/Demo_Project_H7A3/.cproject @@ -0,0 +1,173 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/Demo_Project_H7A3/.project b/Demo_Project_H7A3/.project new file mode 100644 index 0000000..db2cb14 --- /dev/null +++ b/Demo_Project_H7A3/.project @@ -0,0 +1,32 @@ + + + Custom_Loader + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + com.st.stm32cube.ide.mcu.MCUProjectNature + org.eclipse.cdt.core.cnature + com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature + com.st.stm32cube.ide.mcu.MCUCubeProjectNature + com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature + com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature + com.st.stm32cube.ide.mcu.MCURootProjectNature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/Demo_Project_H7A3/Core/Inc/gpio.h b/Demo_Project_H7A3/Core/Inc/gpio.h new file mode 100644 index 0000000..6c03ac7 --- /dev/null +++ b/Demo_Project_H7A3/Core/Inc/gpio.h @@ -0,0 +1,49 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file gpio.h + * @brief This file contains all the function prototypes for + * the gpio.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __GPIO_H__ +#define __GPIO_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_GPIO_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif +#endif /*__ GPIO_H__ */ + diff --git a/Demo_Project_H7A3/Core/Inc/main.h b/Demo_Project_H7A3/Core/Inc/main.h new file mode 100644 index 0000000..4f2abc6 --- /dev/null +++ b/Demo_Project_H7A3/Core/Inc/main.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/Demo_Project_H7A3/Core/Inc/stm32h7xx_hal_conf.h b/Demo_Project_H7A3/Core/Inc/stm32h7xx_hal_conf.h new file mode 100644 index 0000000..1961fcb --- /dev/null +++ b/Demo_Project_H7A3/Core/Inc/stm32h7xx_hal_conf.h @@ -0,0 +1,510 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_CONF_H +#define STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + + /* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_FMAC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CORDIC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_OTFDEC_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_GFXMMU_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_OSPI_MODULE_ENABLED */ +#define HAL_OSPI_MODULE_ENABLED +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_RAMECC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_PSSI_MODULE_ENABLED */ +/* #define HAL_DTS_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_MDMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_HSEM_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (12000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (14UL) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 0U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 1U /* ADC register callback enabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 1U /* DMA2D register callback enabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 1U /* LTDC register callback enabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ +#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 (0x02UL) +#define ETH_MAC_ADDR1 (0x00UL) +#define ETH_MAC_ADDR2 (0x00UL) +#define ETH_MAC_ADDR3 (0x00UL) +#define ETH_MAC_ADDR4 (0x00UL) +#define ETH_MAC_ADDR5 (0x00UL) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED + #include "stm32h7xx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32h7xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32h7xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_FMAC_MODULE_ENABLED + #include "stm32h7xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32h7xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_OTFDEC_MODULE_ENABLED +#include "stm32h7xx_hal_otfdec.h" +#endif /* HAL_OTFDEC_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32h7xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_CONF_H */ diff --git a/Demo_Project_H7A3/Core/Inc/stm32h7xx_it.h b/Demo_Project_H7A3/Core/Inc/stm32h7xx_it.h new file mode 100644 index 0000000..de6dd45 --- /dev/null +++ b/Demo_Project_H7A3/Core/Inc/stm32h7xx_it.h @@ -0,0 +1,66 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_IT_H +#define __STM32H7xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_IT_H */ diff --git a/Demo_Project_H7A3/Core/Src/gpio.c b/Demo_Project_H7A3/Core/Src/gpio.c new file mode 100644 index 0000000..b98ee23 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/gpio.c @@ -0,0 +1,57 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file gpio.c + * @brief This file provides code for the configuration + * of all used GPIO pins. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "gpio.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/*----------------------------------------------------------------------------*/ +/* Configure GPIO */ +/*----------------------------------------------------------------------------*/ +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/** Configure pins as + * Analog + * Input + * Output + * EVENT_OUT + * EXTI +*/ +void MX_GPIO_Init(void) +{ + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + +} + +/* USER CODE BEGIN 2 */ + +/* USER CODE END 2 */ diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c new file mode 100644 index 0000000..1cf6332 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -0,0 +1,205 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "gpio.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* Enable I-Cache---------------------------------------------------------*/ + SCB_EnableICache(); + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /*AXI clock gating */ + RCC->CKGAENR = 0xFFFFFFFF; + + /** Supply configuration update enable + */ + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0); + + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} + + /** Macro to configure the PLL clock source + */ + __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_CSI); + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_CSI; + RCC_OscInitStruct.CSIState = RCC_CSI_ON; + RCC_OscInitStruct.CSICalibrationValue = 16; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_CSI; + RCC_OscInitStruct.PLL.PLLM = 2; + RCC_OscInitStruct.PLL.PLLN = 280; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 56; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_1; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 + |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) + { + Error_Handler(); + } +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + __disable_irq(); + while (1) + { + } + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ diff --git a/Demo_Project_H7A3/Core/Src/stm32h7xx_hal_msp.c b/Demo_Project_H7A3/Core/Src/stm32h7xx_hal_msp.c new file mode 100644 index 0000000..b8784e2 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/stm32h7xx_hal_msp.c @@ -0,0 +1,80 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Demo_Project_H7A3/Core/Src/stm32h7xx_it.c b/Demo_Project_H7A3/Core/Src/stm32h7xx_it.c new file mode 100644 index 0000000..4834a44 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/stm32h7xx_it.c @@ -0,0 +1,203 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32h7xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32H7xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32h7xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Demo_Project_H7A3/Core/Src/syscalls.c b/Demo_Project_H7A3/Core/Src/syscalls.c new file mode 100644 index 0000000..f4278b7 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/syscalls.c @@ -0,0 +1,176 @@ +/** + ****************************************************************************** + * @file syscalls.c + * @author Auto-generated by STM32CubeIDE + * @brief STM32CubeIDE Minimal System calls file + * + * For more information about which c-functions + * need which of these lowlevel functions + * please consult the Newlib libc-manual + ****************************************************************************** + * @attention + * + * Copyright (c) 2020-2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Variables */ +extern int __io_putchar(int ch) __attribute__((weak)); +extern int __io_getchar(void) __attribute__((weak)); + + +char *__env[1] = { 0 }; +char **environ = __env; + + +/* Functions */ +void initialise_monitor_handles() +{ +} + +int _getpid(void) +{ + return 1; +} + +int _kill(int pid, int sig) +{ + (void)pid; + (void)sig; + errno = EINVAL; + return -1; +} + +void _exit (int status) +{ + _kill(status, -1); + while (1) {} /* Make sure we hang here */ +} + +__attribute__((weak)) int _read(int file, char *ptr, int len) +{ + (void)file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + *ptr++ = __io_getchar(); + } + + return len; +} + +__attribute__((weak)) int _write(int file, char *ptr, int len) +{ + (void)file; + int DataIdx; + + for (DataIdx = 0; DataIdx < len; DataIdx++) + { + __io_putchar(*ptr++); + } + return len; +} + +int _close(int file) +{ + (void)file; + return -1; +} + + +int _fstat(int file, struct stat *st) +{ + (void)file; + st->st_mode = S_IFCHR; + return 0; +} + +int _isatty(int file) +{ + (void)file; + return 1; +} + +int _lseek(int file, int ptr, int dir) +{ + (void)file; + (void)ptr; + (void)dir; + return 0; +} + +int _open(char *path, int flags, ...) +{ + (void)path; + (void)flags; + /* Pretend like we always fail */ + return -1; +} + +int _wait(int *status) +{ + (void)status; + errno = ECHILD; + return -1; +} + +int _unlink(char *name) +{ + (void)name; + errno = ENOENT; + return -1; +} + +int _times(struct tms *buf) +{ + (void)buf; + return -1; +} + +int _stat(char *file, struct stat *st) +{ + (void)file; + st->st_mode = S_IFCHR; + return 0; +} + +int _link(char *old, char *new) +{ + (void)old; + (void)new; + errno = EMLINK; + return -1; +} + +int _fork(void) +{ + errno = EAGAIN; + return -1; +} + +int _execve(char *name, char **argv, char **env) +{ + (void)name; + (void)argv; + (void)env; + errno = ENOMEM; + return -1; +} diff --git a/Demo_Project_H7A3/Core/Src/sysmem.c b/Demo_Project_H7A3/Core/Src/sysmem.c new file mode 100644 index 0000000..54081ac --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/sysmem.c @@ -0,0 +1,79 @@ +/** + ****************************************************************************** + * @file sysmem.c + * @author Generated by STM32CubeIDE + * @brief STM32CubeIDE System Memory calls file + * + * For more information about which C functions + * need which of these lowlevel functions + * please consult the newlib libc manual + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes */ +#include +#include + +/** + * Pointer to the current high watermark of the heap usage + */ +static uint8_t *__sbrk_heap_end = NULL; + +/** + * @brief _sbrk() allocates memory to the newlib heap and is used by malloc + * and others from the C library + * + * @verbatim + * ############################################################################ + * # .data # .bss # newlib heap # MSP stack # + * # # # # Reserved by _Min_Stack_Size # + * ############################################################################ + * ^-- RAM start ^-- _end _estack, RAM end --^ + * @endverbatim + * + * This implementation starts allocating at the '_end' linker symbol + * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack + * The implementation considers '_estack' linker symbol to be RAM end + * NOTE: If the MSP stack, at any point during execution, grows larger than the + * reserved size, please increase the '_Min_Stack_Size'. + * + * @param incr Memory size + * @return Pointer to allocated memory + */ +void *_sbrk(ptrdiff_t incr) +{ + extern uint8_t _end; /* Symbol defined in the linker script */ + extern uint8_t _estack; /* Symbol defined in the linker script */ + extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */ + const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size; + const uint8_t *max_heap = (uint8_t *)stack_limit; + uint8_t *prev_heap_end; + + /* Initialize heap end at first call */ + if (NULL == __sbrk_heap_end) + { + __sbrk_heap_end = &_end; + } + + /* Protect heap from growing into the reserved MSP stack */ + if (__sbrk_heap_end + incr > max_heap) + { + errno = ENOMEM; + return (void *)-1; + } + + prev_heap_end = __sbrk_heap_end; + __sbrk_heap_end += incr; + + return (void *)prev_heap_end; +} diff --git a/Demo_Project_H7A3/Core/Src/system_stm32h7xx.c b/Demo_Project_H7A3/Core/Src/system_stm32h7xx.c new file mode 100644 index 0000000..86e6784 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/system_stm32h7xx.c @@ -0,0 +1,450 @@ +/** + ****************************************************************************** + * @file system_stm32h7xx.c + * @author MCD Application Team + * @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32h7xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock, it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32h7xx_system + * @{ + */ + +/** @addtogroup STM32H7xx_System_Private_Includes + * @{ + */ + +#include "stm32h7xx.h" +#include + +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use initialized data in D2 domain SRAM (AHB SRAM) */ +/* #define DATA_IN_D2_SRAM */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in FLASH BANK1 or AXI SRAM, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +#if defined(DUAL_CORE) && defined(CORE_CM4) +/*!< Uncomment the following line if you need to relocate your vector Table + in D2 AXI SRAM else user remap will be done in FLASH BANK2. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS D2_AXISRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BANK2_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#endif /* VECT_TAB_SRAM */ +#else +/*!< Uncomment the following line if you need to relocate your vector Table + in D1 AXI SRAM else user remap will be done in FLASH BANK1. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS D1_AXISRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BANK1_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x400. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x400. */ +#endif /* VECT_TAB_SRAM */ +#endif /* DUAL_CORE && CORE_CM4 */ +#endif /* USER_VECT_TAB_ADDRESS */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 64000000; + uint32_t SystemD2Clock = 64000000; + const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32H7xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting and vector table location + * configuration. + * @param None + * @retval None + */ +void SystemInit (void) +{ +#if defined (DATA_IN_D2_SRAM) + __IO uint32_t tmpreg; +#endif /* DATA_IN_D2_SRAM */ + + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + + /* Increasing the CPU frequency */ + if(FLASH_LATENCY_DEFAULT > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + + /* Set HSION bit */ + RCC->CR |= RCC_CR_HSION; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */ + RCC->CR &= 0xEAF6ED7FU; + + /* Decreasing the number of wait states because of lower CPU frequency */ + if(FLASH_LATENCY_DEFAULT < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT)); + } + +#if defined(D3_SRAM_BASE) + /* Reset D1CFGR register */ + RCC->D1CFGR = 0x00000000; + + /* Reset D2CFGR register */ + RCC->D2CFGR = 0x00000000; + + /* Reset D3CFGR register */ + RCC->D3CFGR = 0x00000000; +#else + /* Reset CDCFGR1 register */ + RCC->CDCFGR1 = 0x00000000; + + /* Reset CDCFGR2 register */ + RCC->CDCFGR2 = 0x00000000; + + /* Reset SRDCFGR register */ + RCC->SRDCFGR = 0x00000000; +#endif + /* Reset PLLCKSELR register */ + RCC->PLLCKSELR = 0x02020200; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x01FF0000; + /* Reset PLL1DIVR register */ + RCC->PLL1DIVR = 0x01010280; + /* Reset PLL1FRACR register */ + RCC->PLL1FRACR = 0x00000000; + + /* Reset PLL2DIVR register */ + RCC->PLL2DIVR = 0x01010280; + + /* Reset PLL2FRACR register */ + + RCC->PLL2FRACR = 0x00000000; + /* Reset PLL3DIVR register */ + RCC->PLL3DIVR = 0x01010280; + + /* Reset PLL3FRACR register */ + RCC->PLL3FRACR = 0x00000000; + + /* Reset HSEBYP bit */ + RCC->CR &= 0xFFFBFFFFU; + + /* Disable all interrupts */ + RCC->CIER = 0x00000000; + +#if (STM32H7_DEV_ID == 0x450UL) + /* dual core CM7 or single core line */ + if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U) + { + /* if stm32h7 revY*/ + /* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */ + *((__IO uint32_t*)0x51008108) = 0x000000001U; + } +#endif /* STM32H7_DEV_ID */ + +#if defined(DATA_IN_D2_SRAM) + /* in case of initialized data in D2 SRAM (AHB SRAM), enable the D2 SRAM clock (AHB SRAM clock) */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) + RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN | RCC_AHB2ENR_D2SRAM3EN); +#elif defined(RCC_AHB2ENR_D2SRAM2EN) + RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN); +#else + RCC->AHB2ENR |= (RCC_AHB2ENR_AHBSRAM1EN | RCC_AHB2ENR_AHBSRAM2EN); +#endif /* RCC_AHB2ENR_D2SRAM3EN */ + + tmpreg = RCC->AHB2ENR; + (void) tmpreg; +#endif /* DATA_IN_D2_SRAM */ + +#if defined(DUAL_CORE) && defined(CORE_CM4) + /* Configure the Vector Table location add offset address for cortex-M4 ------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D2 AXI-RAM or in Internal FLASH */ +#endif /* USER_VECT_TAB_ADDRESS */ + +#else + /* + * Disable the FMC bank1 (enabled after reset). + * This, prevents CPU speculation access on this bank which blocks the use of FMC during + * 24us. During this time the others FMC master (such as LTDC) cannot use it! + */ + FMC_Bank1_R->BTCR[0] = 0x000030D2; + + /* Configure the Vector Table location -------------------------------------*/ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM or in Internal FLASH */ +#endif /* USER_VECT_TAB_ADDRESS */ + +#endif /*DUAL_CORE && CORE_CM4*/ +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock , it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*) + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) + * - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * + * (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp; + uint32_t common_system_clock; + float_t fracn1, pllvco; + + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + common_system_clock = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + common_system_clock = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ; + pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */ + + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + + break; + + case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + + default: + hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ; + pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 ); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ; + common_system_clock = (uint32_t)(float_t)(pllvco/(float_t)pllp); + } + else + { + common_system_clock = 0U; + } + break; + + default: + common_system_clock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)); + break; + } + + /* Compute SystemClock frequency --------------------------------------------------*/ +#if defined (RCC_D1CFGR_D1CPRE) + tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]; + + /* common_system_clock frequency : CM7 CPU frequency */ + common_system_clock >>= tmp; + + /* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */ + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); + +#else + tmp = D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos]; + + /* common_system_clock frequency : CM7 CPU frequency */ + common_system_clock >>= tmp; + + /* SystemD2Clock frequency : AXI and AHBs Clock frequency */ + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); + +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ +} + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/Demo_Project_H7A3/Core/Startup/startup_stm32h7a3zitxq.s b/Demo_Project_H7A3/Core/Startup/startup_stm32h7a3zitxq.s new file mode 100644 index 0000000..bdfc397 --- /dev/null +++ b/Demo_Project_H7A3/Core/Startup/startup_stm32h7a3zitxq.s @@ -0,0 +1,742 @@ +/** + ****************************************************************************** + * @file startup_stm32h7a3xxq.s + * @author MCD Application Team + * @brief STM32H7B3xx Devices vector table for GCC based toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m7 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Call the clock system initialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_PVM_IRQHandler /* PVD/PVM through EXTI Line detection */ + .word RTC_TAMP_STAMP_CSS_LSE_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */ + .word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */ + .word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */ + .word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */ + .word TIM1_UP_IRQHandler /* TIM1 Update interrupt */ + .word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word DFSDM2_IRQHandler /* DFSDM2 Interrupt */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/ + .word DFSDM1_FLT4_IRQHandler /* DFSDM Filter4 Interrupt */ + .word DFSDM1_FLT5_IRQHandler /* DFSDM Filter5 Interrupt */ + .word DFSDM1_FLT6_IRQHandler /* DFSDM Filter6 Interrupt */ + .word DFSDM1_FLT7_IRQHandler /* DFSDM Filter7 Interrupt */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_PSSI_IRQHandler /* DCMI, PSSI */ + .word 0 /* Reserved */ + .word RNG_IRQHandler /* RNG */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC */ + .word LTDC_ER_IRQHandler /* LTDC error */ + .word DMA2D_IRQHandler /* DMA2D */ + .word SAI2_IRQHandler /* SAI2 */ + .word OCTOSPI1_IRQHandler /* OCTOSPI1 */ + .word LPTIM1_IRQHandler /* LPTIM1 */ + .word CEC_IRQHandler /* HDMI_CEC */ + .word I2C4_EV_IRQHandler /* I2C4 Event */ + .word I2C4_ER_IRQHandler /* I2C4 Error */ + .word SPDIF_RX_IRQHandler /* SPDIF_RX */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */ + .word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */ + .word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */ + .word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */ + .word 0 /* Reserved */ + .word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */ + .word TIM15_IRQHandler /* TIM15 global Interrupt */ + .word TIM16_IRQHandler /* TIM16 global Interrupt */ + .word TIM17_IRQHandler /* TIM17 global Interrupt */ + .word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */ + .word MDIOS_IRQHandler /* MDIOS global Interrupt */ + .word JPEG_IRQHandler /* JPEG global Interrupt */ + .word MDMA_IRQHandler /* MDMA global Interrupt */ + .word 0 /* Reserved */ + .word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */ + .word HSEM1_IRQHandler /* HSEM1 global Interrupt */ + .word 0 /* Reserved */ + .word DAC2_IRQHandler /* DAC2 global Interrupt */ + .word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */ + .word BDMA2_Channel0_IRQHandler /* BDMA2 Channel 0 global Interrupt */ + .word BDMA2_Channel1_IRQHandler /* BDMA2 Channel 1 global Interrupt */ + .word BDMA2_Channel2_IRQHandler /* BDMA2 Channel 2 global Interrupt */ + .word BDMA2_Channel3_IRQHandler /* BDMA2 Channel 3 global Interrupt */ + .word BDMA2_Channel4_IRQHandler /* BDMA2 Channel 4 global Interrupt */ + .word BDMA2_Channel5_IRQHandler /* BDMA2 Channel 5 global Interrupt */ + .word BDMA2_Channel6_IRQHandler /* BDMA2 Channel 6 global Interrupt */ + .word BDMA2_Channel7_IRQHandler /* BDMA2 Channel 7 global Interrupt */ + .word COMP_IRQHandler /* COMP global Interrupt */ + .word LPTIM2_IRQHandler /* LP TIM2 global interrupt */ + .word LPTIM3_IRQHandler /* LP TIM3 global interrupt */ + .word UART9_IRQHandler /* UART9 global interrupt */ + .word USART10_IRQHandler /* USART10 global interrupt */ + .word LPUART1_IRQHandler /* LP UART1 interrupt */ + .word 0 /* Reserved */ + .word CRS_IRQHandler /* Clock Recovery Global Interrupt */ + .word ECC_IRQHandler /* ECC diagnostic Global Interrupt */ + .word 0 /* Reserved */ + .word DTS_IRQHandler /* DTS */ + .word 0 /* Reserved */ + .word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */ + .word OCTOSPI2_IRQHandler /* OCTOSPI2 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word GFXMMU_IRQHandler /* GFXMMU */ + .word BDMA1_IRQHandler /* BDMA1 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak RTC_TAMP_STAMP_CSS_LSE_IRQHandler + .thumb_set RTC_TAMP_STAMP_CSS_LSE_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak FDCAN1_IT0_IRQHandler + .thumb_set FDCAN1_IT0_IRQHandler,Default_Handler + + .weak FDCAN2_IT0_IRQHandler + .thumb_set FDCAN2_IT0_IRQHandler,Default_Handler + + .weak FDCAN1_IT1_IRQHandler + .thumb_set FDCAN1_IT1_IRQHandler,Default_Handler + + .weak FDCAN2_IT1_IRQHandler + .thumb_set FDCAN2_IT1_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak DFSDM2_IRQHandler + .thumb_set DFSDM2_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak FDCAN_CAL_IRQHandler + .thumb_set FDCAN_CAL_IRQHandler,Default_Handler + + .weak DFSDM1_FLT4_IRQHandler + .thumb_set DFSDM1_FLT4_IRQHandler,Default_Handler + + .weak DFSDM1_FLT5_IRQHandler + .thumb_set DFSDM1_FLT5_IRQHandler,Default_Handler + + .weak DFSDM1_FLT6_IRQHandler + .thumb_set DFSDM1_FLT6_IRQHandler,Default_Handler + + .weak DFSDM1_FLT7_IRQHandler + .thumb_set DFSDM1_FLT7_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_PSSI_IRQHandler + .thumb_set DCMI_PSSI_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak OCTOSPI1_IRQHandler + .thumb_set OCTOSPI1_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + + .weak SPDIF_RX_IRQHandler + .thumb_set SPDIF_RX_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak DFSDM1_FLT2_IRQHandler + .thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler + + .weak DFSDM1_FLT3_IRQHandler + .thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler + + .weak SWPMI1_IRQHandler + .thumb_set SWPMI1_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak MDIOS_WKUP_IRQHandler + .thumb_set MDIOS_WKUP_IRQHandler,Default_Handler + + .weak MDIOS_IRQHandler + .thumb_set MDIOS_IRQHandler,Default_Handler + + .weak JPEG_IRQHandler + .thumb_set JPEG_IRQHandler,Default_Handler + + .weak MDMA_IRQHandler + .thumb_set MDMA_IRQHandler,Default_Handler + + .weak SDMMC2_IRQHandler + .thumb_set SDMMC2_IRQHandler,Default_Handler + + .weak HSEM1_IRQHandler + .thumb_set HSEM1_IRQHandler,Default_Handler + + .weak DAC2_IRQHandler + .thumb_set DAC2_IRQHandler,Default_Handler + + .weak DMAMUX2_OVR_IRQHandler + .thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler + + .weak BDMA2_Channel0_IRQHandler + .thumb_set BDMA2_Channel0_IRQHandler,Default_Handler + + .weak BDMA2_Channel1_IRQHandler + .thumb_set BDMA2_Channel1_IRQHandler,Default_Handler + + .weak BDMA2_Channel2_IRQHandler + .thumb_set BDMA2_Channel2_IRQHandler,Default_Handler + + .weak BDMA2_Channel3_IRQHandler + .thumb_set BDMA2_Channel3_IRQHandler,Default_Handler + + .weak BDMA2_Channel4_IRQHandler + .thumb_set BDMA2_Channel4_IRQHandler,Default_Handler + + .weak BDMA2_Channel5_IRQHandler + .thumb_set BDMA2_Channel5_IRQHandler,Default_Handler + + .weak BDMA2_Channel6_IRQHandler + .thumb_set BDMA2_Channel6_IRQHandler,Default_Handler + + .weak BDMA2_Channel7_IRQHandler + .thumb_set BDMA2_Channel7_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak LPTIM3_IRQHandler + .thumb_set LPTIM3_IRQHandler,Default_Handler + + .weak LPTIM4_IRQHandler + .thumb_set LPTIM4_IRQHandler,Default_Handler + + .weak LPTIM5_IRQHandler + .thumb_set LPTIM5_IRQHandler,Default_Handler + + .weak UART9_IRQHandler + .thumb_set UART9_IRQHandler,Default_Handler + + .weak USART10_IRQHandler + .thumb_set USART10_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak CRS_IRQHandler + .thumb_set CRS_IRQHandler,Default_Handler + + .weak ECC_IRQHandler + .thumb_set ECC_IRQHandler,Default_Handler + + .weak DTS_IRQHandler + .thumb_set DTS_IRQHandler,Default_Handler + + .weak WAKEUP_PIN_IRQHandler + .thumb_set WAKEUP_PIN_IRQHandler,Default_Handler + + .weak OCTOSPI2_IRQHandler + .thumb_set OCTOSPI2_IRQHandler,Default_Handler + + .weak GFXMMU_IRQHandler + .thumb_set GFXMMU_IRQHandler,Default_Handler + + .weak BDMA1_IRQHandler + .thumb_set BDMA1_IRQHandler,Default_Handler + + diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc new file mode 100644 index 0000000..548744d --- /dev/null +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -0,0 +1,206 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +CORTEX_M7.CPU_DCache=Disabled +CORTEX_M7.CPU_ICache=Enabled +CORTEX_M7.IPParameters=CPU_ICache,CPU_DCache +File.Version=6 +GPIO.groupedBy=Group By Peripherals +KeepUserPlacement=false +Mcu.CPN=STM32H7A3ZIT6Q +Mcu.Family=STM32H7 +Mcu.IP0=CORTEX_M7 +Mcu.IP1=DEBUG +Mcu.IP2=NVIC +Mcu.IP3=OCTOSPI1 +Mcu.IP4=RCC +Mcu.IP5=SYS +Mcu.IPNb=6 +Mcu.Name=STM32H7A3Z(G-I)TxQ +Mcu.Package=LQFP144 +Mcu.Pin0=PE2 +Mcu.Pin1=PF6 +Mcu.Pin10=PD6 +Mcu.Pin11=PG14 +Mcu.Pin12=VP_OCTOSPI1_VS_octo +Mcu.Pin13=VP_SYS_VS_Systick +Mcu.Pin2=PF8 +Mcu.Pin3=PF9 +Mcu.Pin4=PF10 +Mcu.Pin5=PC1 +Mcu.Pin6=PC2_C +Mcu.Pin7=PG6 +Mcu.Pin8=PA13 +Mcu.Pin9=PA14 +Mcu.PinsNb=14 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32H7A3ZITxQ +MxCube.Version=6.7.0 +MxDb.Version=DB.6.0.70 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.SysTick_IRQn=true\:14\:0\:true\:false\:true\:false\:true\:false +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PA13.Mode=Serial_Wire +PA13.Signal=DEBUG_JTMS-SWDIO +PA14.Mode=Serial_Wire +PA14.Signal=DEBUG_JTCK-SWCLK +PC1.Mode=OCTOSPI1_IOH_Port1H +PC1.Signal=OCTOSPIM_P1_IO4 +PC2_C.Mode=OCTOSPI1_IOH_Port1H +PC2_C.Signal=OCTOSPIM_P1_IO5 +PD6.Mode=OCTOSPI1_IOH_Port1H +PD6.Signal=OCTOSPIM_P1_IO6 +PE2.Mode=OCTOSPI1_IOL_Port1L +PE2.Signal=OCTOSPIM_P1_IO2 +PF10.Mode=O1_P1_CLK +PF10.Signal=OCTOSPIM_P1_CLK +PF6.Mode=OCTOSPI1_IOL_Port1L +PF6.Signal=OCTOSPIM_P1_IO3 +PF8.Mode=OCTOSPI1_IOL_Port1L +PF8.Signal=OCTOSPIM_P1_IO0 +PF9.Mode=OCTOSPI1_IOL_Port1L +PF9.Signal=OCTOSPIM_P1_IO1 +PG14.Mode=OCTOSPI1_IOH_Port1H +PG14.Signal=OCTOSPIM_P1_IO7 +PG6.Mode=OCTOSPI1_Port1_NCS +PG6.Signal=OCTOSPIM_P1_NCS +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=true +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=true +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32H7A3ZITxQ +ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=1 +ProjectManager.MainLocation=Core/Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain=STM32CubeIDE +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=Custom_Loader.ioc +ProjectManager.ProjectName=Custom_Loader +ProjectManager.RegisterCallBack=ADC,DMA2D,LTDC +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=STM32CubeIDE +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=true +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,false-3-MX_OCTOSPI1_Init-OCTOSPI1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true +RCC.ADCFreq_Value=2844444.4444444445 +RCC.AHB12Freq_Value=280000000 +RCC.AHB4Freq_Value=280000000 +RCC.APB1Freq_Value=140000000 +RCC.APB2Freq_Value=140000000 +RCC.APB3Freq_Value=140000000 +RCC.APB4Freq_Value=140000000 +RCC.AXIClockFreq_Value=280000000 +RCC.CDCPREFreq_Value=280000000 +RCC.CDPPRE=RCC_APB3_DIV2 +RCC.CDPPRE1=RCC_APB1_DIV2 +RCC.CDPPRE2=RCC_APB2_DIV2 +RCC.CECFreq_Value=32000 +RCC.CKPERFreq_Value=64000000 +RCC.CortexFreq_Value=280000000 +RCC.CpuClockFreq_Value=280000000 +RCC.DAC1Freq_Value=32000 +RCC.DAC2Freq_Value=32000 +RCC.DFSDM2ACLkFreq_Value=140000000 +RCC.DFSDM2Freq_Value=140000000 +RCC.DFSDMACLkFreq_Value=10000000 +RCC.DFSDMFreq_Value=140000000 +RCC.DIVM1=2 +RCC.DIVM2=1 +RCC.DIVM3=2 +RCC.DIVN1=280 +RCC.DIVN2=32 +RCC.DIVN3=64 +RCC.DIVP1Freq_Value=280000000 +RCC.DIVP2=45 +RCC.DIVP2Freq_Value=2844444.4444444445 +RCC.DIVP3=1 +RCC.DIVP3Freq_Value=128000000 +RCC.DIVQ1=56 +RCC.DIVQ1Freq_Value=10000000 +RCC.DIVQ2=125 +RCC.DIVQ2Freq_Value=1024000 +RCC.DIVQ3=8 +RCC.DIVQ3Freq_Value=16000000 +RCC.DIVR1Freq_Value=280000000 +RCC.DIVR2=6 +RCC.DIVR2Freq_Value=21333333.333333332 +RCC.DIVR3=16 +RCC.DIVR3Freq_Value=8000000 +RCC.FDCANFreq_Value=10000000 +RCC.FMCFreq_Value=280000000 +RCC.FamilyName=M +RCC.HCLK3ClockFreq_Value=280000000 +RCC.HCLKFreq_Value=280000000 +RCC.HSE_VALUE=12000000 +RCC.I2C123Freq_Value=140000000 +RCC.I2C4Freq_Value=140000000 +RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CDCPREFreq_Value,CDPPRE,CDPPRE1,CDPPRE2,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,DAC1Freq_Value,DAC2Freq_Value,DFSDM2ACLkFreq_Value,DFSDM2Freq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2,DIVP2Freq_Value,DIVP3,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2_VCI_Range-AdvancedSettings,PLL2_VCO_SEL-AdvancedSettings,PLLSourceVirtual,QSPICLockSelection,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2AFreq_Value,SAI2BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SRDPPRE,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SupplySource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value +RCC.LPTIM1Freq_Value=140000000 +RCC.LPTIM2Freq_Value=140000000 +RCC.LPTIM345Freq_Value=140000000 +RCC.LPUART1Freq_Value=140000000 +RCC.LTDCFreq_Value=8000000 +RCC.MCO1PinFreq_Value=64000000 +RCC.MCO2PinFreq_Value=280000000 +RCC.PLL2_VCI_Range-AdvancedSettings=RCC_PLL2VCIRANGE_0 +RCC.PLL2_VCO_SEL-AdvancedSettings=RCC_PLL2VCOMEDIUM +RCC.PLLSourceVirtual=RCC_PLLSOURCE_CSI +RCC.QSPICLockSelection=RCC_OSPICLKSOURCE_PLL2 +RCC.QSPIFreq_Value=21333333.333333332 +RCC.RNGFreq_Value=48000000 +RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE +RCC.RTCFreq_Value=32768 +RCC.SAI1Freq_Value=10000000 +RCC.SAI2AFreq_Value=10000000 +RCC.SAI2BFreq_Value=10000000 +RCC.SDMMCFreq_Value=10000000 +RCC.SPDIFRXFreq_Value=10000000 +RCC.SPI123Freq_Value=10000000 +RCC.SPI45Freq_Value=140000000 +RCC.SPI6Freq_Value=140000000 +RCC.SRDPPRE=RCC_APB4_DIV2 +RCC.SWPMI1Freq_Value=140000000 +RCC.SYSCLKFreq_VALUE=280000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.SupplySource=PWR_LDO_SUPPLY +RCC.Tim1OutputFreq_Value=280000000 +RCC.Tim2OutputFreq_Value=280000000 +RCC.TraceFreq_Value=280000000 +RCC.USART16CLockSelection=RCC_USART16910CLKSOURCE_PLL2 +RCC.USART16Freq_Value=1024000 +RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL2 +RCC.USART234578Freq_Value=1024000 +RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3 +RCC.USBFreq_Value=16000000 +RCC.VCO1OutputFreq_Value=560000000 +RCC.VCO2OutputFreq_Value=128000000 +RCC.VCO3OutputFreq_Value=128000000 +RCC.VCOInput1Freq_Value=2000000 +RCC.VCOInput2Freq_Value=4000000 +RCC.VCOInput3Freq_Value=2000000 +VP_OCTOSPI1_VS_octo.Mode=octo_mode +VP_OCTOSPI1_VS_octo.Signal=OCTOSPI1_VS_octo +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7a3xxq.h b/Demo_Project_H7A3/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7a3xxq.h new file mode 100644 index 0000000..46da5de --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7a3xxq.h @@ -0,0 +1,22573 @@ +/** + ****************************************************************************** + * @file stm32h7a3xxq.h + * @author MCD Application Team + * @brief CMSIS STM32H7A3xxQ Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2019 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32h7a3xxq + * @{ + */ + +#ifndef STM32H7A3xxQ_H +#define STM32H7A3xxQ_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Peripheral_interrupt_number_definition + * @{ + */ + +/** + * @brief STM32H7XX Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M Processor Exceptions Numbers *****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + HardFault_IRQn = -13, /*!< 3 Cortex-M Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt ( wwdg1_it, wwdg2_it) */ + PVD_PVM_IRQn = 1, /*!< PVD/PVM through EXTI Line detection Interrupt */ + RTC_TAMP_STAMP_CSS_LSE_IRQn = 2, /*!< Tamper, TimeStamp, CSS and LSE interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1 and ADC2 global Interrupts */ + FDCAN1_IT0_IRQn = 19, /*!< FDCAN1 Interrupt line 0 */ + FDCAN2_IT0_IRQn = 20, /*!< FDCAN2 Interrupt line 0 */ + FDCAN1_IT1_IRQn = 21, /*!< FDCAN1 Interrupt line 1 */ + FDCAN2_IT1_IRQn = 22, /*!< FDCAN2 Interrupt line 1 */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + DFSDM2_IRQn = 42, /*!< DFSDM2 global Interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + FDCAN_CAL_IRQn = 63, /*!< FDCAN Calibration unit Interrupt */ + DFSDM1_FLT4_IRQn = 64, /*!< DFSDM Filter4 Interrupt */ + DFSDM1_FLT5_IRQn = 65, /*!< DFSDM Filter5 Interrupt */ + DFSDM1_FLT6_IRQn = 66, /*!< DFSDM Filter6 Interrupt */ + DFSDM1_FLT7_IRQn = 67, /*!< DFSDM Filter7 Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_PSSI_IRQn = 78, /*!< DCMI and PSSI global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + OCTOSPI1_IRQn = 92, /*!< OCTOSPI1 global interrupt */ + LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ + CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */ + I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */ + I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */ + SPDIF_RX_IRQn = 97, /*!< SPDIF-RX global Interrupt */ + DMAMUX1_OVR_IRQn = 102, /*! + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */ + __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */ + __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset: 0x10 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */ + __IO uint32_t PCSEL; /*!< ADC pre-channel selection, Address offset: 0x1C */ + __IO uint32_t LTR1; /*!< ADC watchdog Lower threshold register 1, Address offset: 0x20 */ + __IO uint32_t HTR1; /*!< ADC watchdog higher threshold register 1, Address offset: 0x24 */ + uint32_t RESERVED1; /*!< Reserved, 0x028 */ + uint32_t RESERVED2; /*!< Reserved, 0x02C */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ + __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */ + uint32_t RESERVED3; /*!< Reserved, 0x044 */ + uint32_t RESERVED4; /*!< Reserved, 0x048 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */ + uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */ + __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */ + __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */ + __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */ + __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */ + uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */ + uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */ + __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */ + __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */ + uint32_t RESERVED8; /*!< Reserved, 0x0A8 */ + uint32_t RESERVED9; /*!< Reserved, 0x0AC */ + __IO uint32_t LTR2; /*!< ADC watchdog Lower threshold register 2, Address offset: 0xB0 */ + __IO uint32_t HTR2; /*!< ADC watchdog Higher threshold register 2, Address offset: 0xB4 */ + __IO uint32_t LTR3; /*!< ADC watchdog Lower threshold register 3, Address offset: 0xB8 */ + __IO uint32_t HTR3; /*!< ADC watchdog Higher threshold register 3, Address offset: 0xBC */ + __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xC0 */ + __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xC4 */ + __IO uint32_t CALFACT2; /*!< ADC Linearity Calibration Factors, Address offset: 0xC8 */ +} ADC_TypeDef; + + +typedef struct +{ +__IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */ +uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */ +__IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */ +__IO uint32_t CDR; /*!< ADC common regular data register for dual Address offset: ADC1/3 base address + 0x30C */ +__IO uint32_t CDR2; /*!< ADC common regular data register for 32-bit dual mode Address offset: ADC1/3 base address + 0x310 */ + +} ADC_Common_TypeDef; + + +/** + * @brief VREFBUF + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< VREFBUF control and status register, Address offset: 0x00 */ + __IO uint32_t CCR; /*!< VREFBUF calibration and control register, Address offset: 0x04 */ +} VREFBUF_TypeDef; + + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< FDCAN Core Release register, Address offset: 0x000 */ + __IO uint32_t ENDN; /*!< FDCAN Endian register, Address offset: 0x004 */ + __IO uint32_t RESERVED1; /*!< Reserved, 0x008 */ + __IO uint32_t DBTP; /*!< FDCAN Data Bit Timing & Prescaler register, Address offset: 0x00C */ + __IO uint32_t TEST; /*!< FDCAN Test register, Address offset: 0x010 */ + __IO uint32_t RWD; /*!< FDCAN RAM Watchdog register, Address offset: 0x014 */ + __IO uint32_t CCCR; /*!< FDCAN CC Control register, Address offset: 0x018 */ + __IO uint32_t NBTP; /*!< FDCAN Nominal Bit Timing & Prescaler register, Address offset: 0x01C */ + __IO uint32_t TSCC; /*!< FDCAN Timestamp Counter Configuration register, Address offset: 0x020 */ + __IO uint32_t TSCV; /*!< FDCAN Timestamp Counter Value register, Address offset: 0x024 */ + __IO uint32_t TOCC; /*!< FDCAN Timeout Counter Configuration register, Address offset: 0x028 */ + __IO uint32_t TOCV; /*!< FDCAN Timeout Counter Value register, Address offset: 0x02C */ + __IO uint32_t RESERVED2[4]; /*!< Reserved, 0x030 - 0x03C */ + __IO uint32_t ECR; /*!< FDCAN Error Counter register, Address offset: 0x040 */ + __IO uint32_t PSR; /*!< FDCAN Protocol Status register, Address offset: 0x044 */ + __IO uint32_t TDCR; /*!< FDCAN Transmitter Delay Compensation register, Address offset: 0x048 */ + __IO uint32_t RESERVED3; /*!< Reserved, 0x04C */ + __IO uint32_t IR; /*!< FDCAN Interrupt register, Address offset: 0x050 */ + __IO uint32_t IE; /*!< FDCAN Interrupt Enable register, Address offset: 0x054 */ + __IO uint32_t ILS; /*!< FDCAN Interrupt Line Select register, Address offset: 0x058 */ + __IO uint32_t ILE; /*!< FDCAN Interrupt Line Enable register, Address offset: 0x05C */ + __IO uint32_t RESERVED4[8]; /*!< Reserved, 0x060 - 0x07C */ + __IO uint32_t GFC; /*!< FDCAN Global Filter Configuration register, Address offset: 0x080 */ + __IO uint32_t SIDFC; /*!< FDCAN Standard ID Filter Configuration register, Address offset: 0x084 */ + __IO uint32_t XIDFC; /*!< FDCAN Extended ID Filter Configuration register, Address offset: 0x088 */ + __IO uint32_t RESERVED5; /*!< Reserved, 0x08C */ + __IO uint32_t XIDAM; /*!< FDCAN Extended ID AND Mask register, Address offset: 0x090 */ + __IO uint32_t HPMS; /*!< FDCAN High Priority Message Status register, Address offset: 0x094 */ + __IO uint32_t NDAT1; /*!< FDCAN New Data 1 register, Address offset: 0x098 */ + __IO uint32_t NDAT2; /*!< FDCAN New Data 2 register, Address offset: 0x09C */ + __IO uint32_t RXF0C; /*!< FDCAN Rx FIFO 0 Configuration register, Address offset: 0x0A0 */ + __IO uint32_t RXF0S; /*!< FDCAN Rx FIFO 0 Status register, Address offset: 0x0A4 */ + __IO uint32_t RXF0A; /*!< FDCAN Rx FIFO 0 Acknowledge register, Address offset: 0x0A8 */ + __IO uint32_t RXBC; /*!< FDCAN Rx Buffer Configuration register, Address offset: 0x0AC */ + __IO uint32_t RXF1C; /*!< FDCAN Rx FIFO 1 Configuration register, Address offset: 0x0B0 */ + __IO uint32_t RXF1S; /*!< FDCAN Rx FIFO 1 Status register, Address offset: 0x0B4 */ + __IO uint32_t RXF1A; /*!< FDCAN Rx FIFO 1 Acknowledge register, Address offset: 0x0B8 */ + __IO uint32_t RXESC; /*!< FDCAN Rx Buffer/FIFO Element Size Configuration register, Address offset: 0x0BC */ + __IO uint32_t TXBC; /*!< FDCAN Tx Buffer Configuration register, Address offset: 0x0C0 */ + __IO uint32_t TXFQS; /*!< FDCAN Tx FIFO/Queue Status register, Address offset: 0x0C4 */ + __IO uint32_t TXESC; /*!< FDCAN Tx Buffer Element Size Configuration register, Address offset: 0x0C8 */ + __IO uint32_t TXBRP; /*!< FDCAN Tx Buffer Request Pending register, Address offset: 0x0CC */ + __IO uint32_t TXBAR; /*!< FDCAN Tx Buffer Add Request register, Address offset: 0x0D0 */ + __IO uint32_t TXBCR; /*!< FDCAN Tx Buffer Cancellation Request register, Address offset: 0x0D4 */ + __IO uint32_t TXBTO; /*!< FDCAN Tx Buffer Transmission Occurred register, Address offset: 0x0D8 */ + __IO uint32_t TXBCF; /*!< FDCAN Tx Buffer Cancellation Finished register, Address offset: 0x0DC */ + __IO uint32_t TXBTIE; /*!< FDCAN Tx Buffer Transmission Interrupt Enable register, Address offset: 0x0E0 */ + __IO uint32_t TXBCIE; /*!< FDCAN Tx Buffer Cancellation Finished Interrupt Enable register, Address offset: 0x0E4 */ + __IO uint32_t RESERVED6[2]; /*!< Reserved, 0x0E8 - 0x0EC */ + __IO uint32_t TXEFC; /*!< FDCAN Tx Event FIFO Configuration register, Address offset: 0x0F0 */ + __IO uint32_t TXEFS; /*!< FDCAN Tx Event FIFO Status register, Address offset: 0x0F4 */ + __IO uint32_t TXEFA; /*!< FDCAN Tx Event FIFO Acknowledge register, Address offset: 0x0F8 */ + __IO uint32_t RESERVED7; /*!< Reserved, 0x0FC */ +} FDCAN_GlobalTypeDef; + +/** + * @brief TTFD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t TTTMC; /*!< TT Trigger Memory Configuration register, Address offset: 0x100 */ + __IO uint32_t TTRMC; /*!< TT Reference Message Configuration register, Address offset: 0x104 */ + __IO uint32_t TTOCF; /*!< TT Operation Configuration register, Address offset: 0x108 */ + __IO uint32_t TTMLM; /*!< TT Matrix Limits register, Address offset: 0x10C */ + __IO uint32_t TURCF; /*!< TUR Configuration register, Address offset: 0x110 */ + __IO uint32_t TTOCN; /*!< TT Operation Control register, Address offset: 0x114 */ + __IO uint32_t TTGTP; /*!< TT Global Time Preset register, Address offset: 0x118 */ + __IO uint32_t TTTMK; /*!< TT Time Mark register, Address offset: 0x11C */ + __IO uint32_t TTIR; /*!< TT Interrupt register, Address offset: 0x120 */ + __IO uint32_t TTIE; /*!< TT Interrupt Enable register, Address offset: 0x124 */ + __IO uint32_t TTILS; /*!< TT Interrupt Line Select register, Address offset: 0x128 */ + __IO uint32_t TTOST; /*!< TT Operation Status register, Address offset: 0x12C */ + __IO uint32_t TURNA; /*!< TT TUR Numerator Actual register, Address offset: 0x130 */ + __IO uint32_t TTLGT; /*!< TT Local and Global Time register, Address offset: 0x134 */ + __IO uint32_t TTCTC; /*!< TT Cycle Time and Count register, Address offset: 0x138 */ + __IO uint32_t TTCPT; /*!< TT Capture Time register, Address offset: 0x13C */ + __IO uint32_t TTCSM; /*!< TT Cycle Sync Mark register, Address offset: 0x140 */ + __IO uint32_t RESERVED1[111]; /*!< Reserved, 0x144 - 0x2FC */ + __IO uint32_t TTTS; /*!< TT Trigger Select register, Address offset: 0x300 */ +} TTCAN_TypeDef; + +/** + * @brief FD Controller Area Network + */ + +typedef struct +{ + __IO uint32_t CREL; /*!< Clock Calibration Unit Core Release register, Address offset: 0x00 */ + __IO uint32_t CCFG; /*!< Calibration Configuration register, Address offset: 0x04 */ + __IO uint32_t CSTAT; /*!< Calibration Status register, Address offset: 0x08 */ + __IO uint32_t CWD; /*!< Calibration Watchdog register, Address offset: 0x0C */ + __IO uint32_t IR; /*!< CCU Interrupt register, Address offset: 0x10 */ + __IO uint32_t IE; /*!< CCU Interrupt Enable register, Address offset: 0x14 */ +} FDCAN_ClockCalibrationUnit_TypeDef; + + +/** + * @brief Consumer Electronics Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + + +/** + * @brief Clock Recovery System + */ +typedef struct +{ +__IO uint32_t CR; /*!< CRS ccontrol register, Address offset: 0x00 */ +__IO uint32_t CFGR; /*!< CRS configuration register, Address offset: 0x04 */ +__IO uint32_t ISR; /*!< CRS interrupt and status register, Address offset: 0x08 */ +__IO uint32_t ICR; /*!< CRS interrupt flag clear register, Address offset: 0x0C */ +} CRS_TypeDef; + + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ + __IO uint32_t CCR; /*!< DAC calibration control register, Address offset: 0x38 */ + __IO uint32_t MCR; /*!< DAC mode control register, Address offset: 0x3C */ + __IO uint32_t SHSR1; /*!< DAC Sample and Hold sample time register 1, Address offset: 0x40 */ + __IO uint32_t SHSR2; /*!< DAC Sample and Hold sample time register 2, Address offset: 0x44 */ + __IO uint32_t SHHR; /*!< DAC Sample and Hold hold time register, Address offset: 0x48 */ + __IO uint32_t SHRR; /*!< DAC Sample and Hold refresh time register, Address offset: 0x4C */ +} DAC_TypeDef; + +/** + * @brief DFSDM module registers + */ +typedef struct +{ + __IO uint32_t FLTCR1; /*!< DFSDM control register1, Address offset: 0x100 */ + __IO uint32_t FLTCR2; /*!< DFSDM control register2, Address offset: 0x104 */ + __IO uint32_t FLTISR; /*!< DFSDM interrupt and status register, Address offset: 0x108 */ + __IO uint32_t FLTICR; /*!< DFSDM interrupt flag clear register, Address offset: 0x10C */ + __IO uint32_t FLTJCHGR; /*!< DFSDM injected channel group selection register, Address offset: 0x110 */ + __IO uint32_t FLTFCR; /*!< DFSDM filter control register, Address offset: 0x114 */ + __IO uint32_t FLTJDATAR; /*!< DFSDM data register for injected group, Address offset: 0x118 */ + __IO uint32_t FLTRDATAR; /*!< DFSDM data register for regular group, Address offset: 0x11C */ + __IO uint32_t FLTAWHTR; /*!< DFSDM analog watchdog high threshold register, Address offset: 0x120 */ + __IO uint32_t FLTAWLTR; /*!< DFSDM analog watchdog low threshold register, Address offset: 0x124 */ + __IO uint32_t FLTAWSR; /*!< DFSDM analog watchdog status register Address offset: 0x128 */ + __IO uint32_t FLTAWCFR; /*!< DFSDM analog watchdog clear flag register Address offset: 0x12C */ + __IO uint32_t FLTEXMAX; /*!< DFSDM extreme detector maximum register, Address offset: 0x130 */ + __IO uint32_t FLTEXMIN; /*!< DFSDM extreme detector minimum register Address offset: 0x134 */ + __IO uint32_t FLTCNVTIMR; /*!< DFSDM conversion timer, Address offset: 0x138 */ +} DFSDM_Filter_TypeDef; + +/** + * @brief DFSDM channel configuration registers + */ +typedef struct +{ + __IO uint32_t CHCFGR1; /*!< DFSDM channel configuration register1, Address offset: 0x00 */ + __IO uint32_t CHCFGR2; /*!< DFSDM channel configuration register2, Address offset: 0x04 */ + __IO uint32_t CHAWSCDR; /*!< DFSDM channel analog watchdog and + short circuit detector register, Address offset: 0x08 */ + __IO uint32_t CHWDATAR; /*!< DFSDM channel watchdog filter data register, Address offset: 0x0C */ + __IO uint32_t CHDATINR; /*!< DFSDM channel data input register, Address offset: 0x10 */ + __IO uint32_t CHDLYR; /*!< DFSDM channel delay register, Address offset: 0x14 */ +} DFSDM_Channel_TypeDef; + +/** + * @brief Debug MCU + */ +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + uint32_t RESERVED4[11]; /*!< Reserved, Address offset: 0x08 */ + __IO uint32_t APB3FZ1; /*!< Debug MCU APB3FZ1 freeze register, Address offset: 0x34 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x38 */ + __IO uint32_t APB1LFZ1; /*!< Debug MCU APB1LFZ1 freeze register, Address offset: 0x3C */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x40 */ + __IO uint32_t APB1HFZ1; /*!< Debug MCU APB1LFZ1 freeze register, Address offset: 0x44 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t APB2FZ1; /*!< Debug MCU APB2FZ1 freeze register, Address offset: 0x4C */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0x50 */ + __IO uint32_t APB4FZ1; /*!< Debug MCU APB4FZ1 freeze register, Address offset: 0x54 */ +}DBGMCU_TypeDef; +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief PSSI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< PSSI control register 1, Address offset: 0x000 */ + __IO uint32_t SR; /*!< PSSI status register, Address offset: 0x004 */ + __IO uint32_t RIS; /*!< PSSI raw interrupt status register, Address offset: 0x008 */ + __IO uint32_t IER; /*!< PSSI interrupt enable register, Address offset: 0x00C */ + __IO uint32_t MIS; /*!< PSSI masked interrupt status register, Address offset: 0x010 */ + __IO uint32_t ICR; /*!< PSSI interrupt clear register, Address offset: 0x014 */ + __IO uint32_t RESERVED1[4]; /*!< Reserved, 0x018 - 0x024 */ + __IO uint32_t DR; /*!< PSSI data register, Address offset: 0x028 */ + __IO uint32_t RESERVED2[241]; /*!< Reserved, 0x02C - 0x3EC */ + __IO uint32_t HWCFGR; /*!< PSSI IP HW configuration register, Address offset: 0x3F0 */ + __IO uint32_t VERR; /*!< PSSI IP version register, Address offset: 0x3F4 */ + __IO uint32_t IPIDR; /*!< PSSI IP ID register, Address offset: 0x3F8 */ + __IO uint32_t SIDR; /*!< PSSI SIZE ID register, Address offset: 0x3FC */ +} PSSI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CM0AR; /*!< DMA channel x memory 0 address register */ + __IO uint32_t CM1AR; /*!< DMA channel x memory 1 address register */ +} BDMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ +} BDMA_TypeDef; + +typedef struct +{ + __IO uint32_t CCR; /*!< DMA Multiplexer Channel x Control Register */ +}DMAMUX_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< DMA Channel Status Register */ + __IO uint32_t CFR; /*!< DMA Channel Clear Flag Register */ +}DMAMUX_ChannelStatus_TypeDef; + +typedef struct +{ + __IO uint32_t RGCR; /*!< DMA Request Generator x Control Register */ +}DMAMUX_RequestGen_TypeDef; + +typedef struct +{ + __IO uint32_t RGSR; /*!< DMA Request Generator Status Register */ + __IO uint32_t RGCFR; /*!< DMA Request Generator Clear Flag Register */ +}DMAMUX_RequestGenStatus_TypeDef; + +/** + * @brief MDMA Controller + */ +typedef struct +{ + __IO uint32_t GISR0; /*!< MDMA Global Interrupt/Status Register 0, Address offset: 0x00 */ +}MDMA_TypeDef; + +typedef struct +{ + __IO uint32_t CISR; /*!< MDMA channel x interrupt/status register, Address offset: 0x40 */ + __IO uint32_t CIFCR; /*!< MDMA channel x interrupt flag clear register, Address offset: 0x44 */ + __IO uint32_t CESR; /*!< MDMA Channel x error status register, Address offset: 0x48 */ + __IO uint32_t CCR; /*!< MDMA channel x control register, Address offset: 0x4C */ + __IO uint32_t CTCR; /*!< MDMA channel x Transfer Configuration register, Address offset: 0x50 */ + __IO uint32_t CBNDTR; /*!< MDMA Channel x block number of data register, Address offset: 0x54 */ + __IO uint32_t CSAR; /*!< MDMA channel x source address register, Address offset: 0x58 */ + __IO uint32_t CDAR; /*!< MDMA channel x destination address register, Address offset: 0x5C */ + __IO uint32_t CBRUR; /*!< MDMA channel x Block Repeat address Update register, Address offset: 0x60 */ + __IO uint32_t CLAR; /*!< MDMA channel x Link Address register, Address offset: 0x64 */ + __IO uint32_t CTBR; /*!< MDMA channel x Trigger and Bus selection Register, Address offset: 0x68 */ + uint32_t RESERVED0; /*!< Reserved, 0x6C */ + __IO uint32_t CMAR; /*!< MDMA channel x Mask address register, Address offset: 0x70 */ + __IO uint32_t CMDR; /*!< MDMA channel x Mask Data register, Address offset: 0x74 */ +}MDMA_Channel_TypeDef; + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ +__IO uint32_t RTSR1; /*!< EXTI Rising trigger selection register, Address offset: 0x00 */ +__IO uint32_t FTSR1; /*!< EXTI Falling trigger selection register, Address offset: 0x04 */ +__IO uint32_t SWIER1; /*!< EXTI Software interrupt event register, Address offset: 0x08 */ +__IO uint32_t D3PMR1; /*!< EXTI D3 Pending mask register, (same register as to SRDPMR1) Address offset: 0x0C */ +__IO uint32_t D3PCR1L; /*!< EXTI D3 Pending clear selection register low, (same register as to SRDPCR1L) Address offset: 0x10 */ +__IO uint32_t D3PCR1H; /*!< EXTI D3 Pending clear selection register High, (same register as to SRDPCR1H) Address offset: 0x14 */ +uint32_t RESERVED1[2]; /*!< Reserved, 0x18 to 0x1C */ +__IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x20 */ +__IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x24 */ +__IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x28 */ +__IO uint32_t D3PMR2; /*!< EXTI D3 Pending mask register, (same register as to SRDPMR2) Address offset: 0x2C */ +__IO uint32_t D3PCR2L; /*!< EXTI D3 Pending clear selection register low, (same register as to SRDPCR2L) Address offset: 0x30 */ +__IO uint32_t D3PCR2H; /*!< EXTI D3 Pending clear selection register High, (same register as to SRDPCR2H) Address offset: 0x34 */ +uint32_t RESERVED2[2]; /*!< Reserved, 0x38 to 0x3C */ +__IO uint32_t RTSR3; /*!< EXTI Rising trigger selection register, Address offset: 0x40 */ +__IO uint32_t FTSR3; /*!< EXTI Falling trigger selection register, Address offset: 0x44 */ +__IO uint32_t SWIER3; /*!< EXTI Software interrupt event register, Address offset: 0x48 */ +__IO uint32_t D3PMR3; /*!< EXTI D3 Pending mask register, (same register as to SRDPMR3) Address offset: 0x4C */ +__IO uint32_t D3PCR3L; /*!< EXTI D3 Pending clear selection register low, (same register as to SRDPCR3L) Address offset: 0x50 */ +__IO uint32_t D3PCR3H; /*!< EXTI D3 Pending clear selection register High, (same register as to SRDPCR3H) Address offset: 0x54 */ +uint32_t RESERVED3[10]; /*!< Reserved, 0x58 to 0x7C */ +__IO uint32_t IMR1; /*!< EXTI Interrupt mask register, Address offset: 0x80 */ +__IO uint32_t EMR1; /*!< EXTI Event mask register, Address offset: 0x84 */ +__IO uint32_t PR1; /*!< EXTI Pending register, Address offset: 0x88 */ +uint32_t RESERVED4; /*!< Reserved, 0x8C */ +__IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x90 */ +__IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x94 */ +__IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x98 */ +uint32_t RESERVED5; /*!< Reserved, 0x9C */ +__IO uint32_t IMR3; /*!< EXTI Interrupt mask register, Address offset: 0xA0 */ +__IO uint32_t EMR3; /*!< EXTI Event mask register, Address offset: 0xA4 */ +__IO uint32_t PR3; /*!< EXTI Pending register, Address offset: 0xA8 */ +}EXTI_TypeDef; + +/** + * @brief This structure registers corresponds to EXTI_Typdef CPU1/CPU2 registers subset (IMRx, EMRx and PRx), allowing to define EXTI_D1/EXTI_D2 + * with rapid/common access to these IMRx, EMRx, PRx registers for CPU1 and CPU2. + * Note that EXTI_D1 and EXTI_D2 bases addresses are calculated to point to CPUx first register: + * IMR1 in case of EXTI_D1 that is addressing CPU1 (Cortex-M7) + * C2IMR1 in case of EXTI_D2 that is addressing CPU2 (Cortex-M4) + * Note: EXTI_D2 and corresponding C2IMRx, C2EMRx and C2PRx registers are available for Dual Core devices only + */ + +typedef struct +{ +__IO uint32_t IMR1; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ +__IO uint32_t EMR1; /*!< EXTI Event mask register, Address offset: 0x04 */ +__IO uint32_t PR1; /*!< EXTI Pending register, Address offset: 0x08 */ +uint32_t RESERVED1; /*!< Reserved, 0x0C */ +__IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x10 */ +__IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x14 */ +__IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x18 */ +uint32_t RESERVED2; /*!< Reserved, 0x1C */ +__IO uint32_t IMR3; /*!< EXTI Interrupt mask register, Address offset: 0x20 */ +__IO uint32_t EMR3; /*!< EXTI Event mask register, Address offset: 0x24 */ +__IO uint32_t PR3; /*!< EXTI Pending register, Address offset: 0x28 */ +}EXTI_Core_TypeDef; + + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR1; /*!< Flash Key Register for bank1, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< Flash Option Key Register, Address offset: 0x08 */ + __IO uint32_t CR1; /*!< Flash Control Register for bank1, Address offset: 0x0C */ + __IO uint32_t SR1; /*!< Flash Status Register for bank1, Address offset: 0x10 */ + __IO uint32_t CCR1; /*!< Flash Control Register for bank1, Address offset: 0x14 */ + __IO uint32_t OPTCR; /*!< Flash Option Control Register, Address offset: 0x18 */ + __IO uint32_t OPTSR_CUR; /*!< Flash Option Status Current Register, Address offset: 0x1C */ + __IO uint32_t OPTSR_PRG; /*!< Flash Option Status to Program Register, Address offset: 0x20 */ + __IO uint32_t OPTCCR; /*!< Flash Option Clear Control Register, Address offset: 0x24 */ + __IO uint32_t PRAR_CUR1; /*!< Flash Current Protection Address Register for bank1, Address offset: 0x28 */ + __IO uint32_t PRAR_PRG1; /*!< Flash Protection Address to Program Register for bank1, Address offset: 0x2C */ + __IO uint32_t SCAR_CUR1; /*!< Flash Current Secure Address Register for bank1, Address offset: 0x30 */ + __IO uint32_t SCAR_PRG1; /*!< Flash Secure Address to Program Register for bank1, Address offset: 0x34 */ + __IO uint32_t WPSN_CUR1; /*!< Flash Current Write Protection Register on bank1, Address offset: 0x38 */ + __IO uint32_t WPSN_PRG1; /*!< Flash Write Protection to Program Register on bank1, Address offset: 0x3C */ + __IO uint32_t BOOT_CUR; /*!< Flash Current Boot Address for Pelican Core Register, Address offset: 0x40 */ + __IO uint32_t BOOT_PRG; /*!< Flash Boot Address to Program for Pelican Core Register, Address offset: 0x44 */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x48 to 0x4C */ + __IO uint32_t CRCCR1; /*!< Flash CRC Control register For Bank1 Register , Address offset: 0x50 */ + __IO uint32_t CRCSADD1; /*!< Flash CRC Start Address Register for Bank1 , Address offset: 0x54 */ + __IO uint32_t CRCEADD1; /*!< Flash CRC End Address Register for Bank1 , Address offset: 0x58 */ + __IO uint32_t CRCDATA; /*!< Flash CRC Data Register for Bank1 , Address offset: 0x5C */ + __IO uint32_t ECC_FA1; /*!< Flash ECC Fail Address For Bank1 Register , Address offset: 0x60 */ + uint32_t RESERVED; /*!< Reserved, 0x64 */ + __IO uint32_t OTPBL_CUR; /*!< Flash Current OTP Block Lock Register, Address offset: 0x68 */ + __IO uint32_t OTPBL_PRG; /*!< Flash OTP Block Lock to Program Register, Address offset: 0x6C */ + uint32_t RESERVED1[37]; /*!< Reserved, 0x70 to 0x100 */ + __IO uint32_t KEYR2; /*!< Flash Key Register for bank2, Address offset: 0x104 */ + uint32_t RESERVED2; /*!< Reserved, 0x108 */ + __IO uint32_t CR2; /*!< Flash Control Register for bank2, Address offset: 0x10C */ + __IO uint32_t SR2; /*!< Flash Status Register for bank2, Address offset: 0x110 */ + __IO uint32_t CCR2; /*!< Flash Status Register for bank2, Address offset: 0x114 */ + uint32_t RESERVED3[4]; /*!< Reserved, 0x118 to 0x124 */ + __IO uint32_t PRAR_CUR2; /*!< Flash Current Protection Address Register for bank2, Address offset: 0x128 */ + __IO uint32_t PRAR_PRG2; /*!< Flash Protection Address to Program Register for bank2, Address offset: 0x12C */ + __IO uint32_t SCAR_CUR2; /*!< Flash Current Secure Address Register for bank2, Address offset: 0x130 */ + __IO uint32_t SCAR_PRG2; /*!< Flash Secure Address Register for bank2, Address offset: 0x134 */ + __IO uint32_t WPSN_CUR2; /*!< Flash Current Write Protection Register on bank2, Address offset: 0x138 */ + __IO uint32_t WPSN_PRG2; /*!< Flash Write Protection to Program Register on bank2, Address offset: 0x13C */ + uint32_t RESERVED4[4]; /*!< Reserved, 0x140 to 0x14C */ + __IO uint32_t CRCCR2; /*!< Flash CRC Control register For Bank2 Register , Address offset: 0x150 */ + __IO uint32_t CRCSADD2; /*!< Flash CRC Start Address Register for Bank2 , Address offset: 0x154 */ + __IO uint32_t CRCEADD2; /*!< Flash CRC End Address Register for Bank2 , Address offset: 0x158 */ + __IO uint32_t CRCDATA2; /*!< Flash CRC Data Register for Bank2 , Address offset: 0x15C */ + __IO uint32_t ECC_FA2; /*!< Flash ECC Fail Address For Bank2 Register , Address offset: 0x160 */ +} FLASH_TypeDef; + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */ + __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */ + __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */ + __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */ + uint32_t RESERVED0; /*!< Reserved, 0x70 */ + __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */ +} FMC_Bank2_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register 3, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */ + uint32_t RESERVED; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5 and 6 + */ + + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + +/** + * @brief GFXMMU registers + */ + +typedef struct +{ + __IO uint32_t CR; /*!< GFXMMU configuration register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< GFXMMU status register, Address offset: 0x04 */ + __IO uint32_t FCR; /*!< GFXMMU flag clear register, Address offset: 0x08 */ + __IO uint32_t CCR; /*!< GFXMMU Cache Control Register, Address offset: 0x0C */ + __IO uint32_t DVR; /*!< GFXMMU default value register, Address offset: 0x10 */ + uint32_t RESERVED1[3]; /*!< Reserved1, Address offset: 0x14 to 0x1C */ + __IO uint32_t B0CR; /*!< GFXMMU buffer 0 configuration register, Address offset: 0x20 */ + __IO uint32_t B1CR; /*!< GFXMMU buffer 1 configuration register, Address offset: 0x24 */ + __IO uint32_t B2CR; /*!< GFXMMU buffer 2 configuration register, Address offset: 0x28 */ + __IO uint32_t B3CR; /*!< GFXMMU buffer 3 configuration register, Address offset: 0x2C */ + uint32_t RESERVED2[1012]; /*!< Reserved2, Address offset: 0x30 to 0xFFC */ + __IO uint32_t LUT[2048]; /*!< GFXMMU LUT registers, Address offset: 0x1000 to 0x2FFC + For LUT line i, LUTiL = LUT[2*i] and LUTiH = LUT[(2*i)+1] */ +} GFXMMU_TypeDef; +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief Operational Amplifier (OPAMP) + */ + +typedef struct +{ + __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ + __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ + __IO uint32_t HSOTR; /*!< OPAMP offset trimming register for high speed mode, Address offset: 0x08 */ +} OPAMP_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x00 */ + __IO uint32_t PMCR; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + __IO uint32_t CFGR; /*!< SYSCFG configuration registers, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t CCCSR; /*!< SYSCFG compensation cell control/status register, Address offset: 0x20 */ + __IO uint32_t CCVR; /*!< SYSCFG compensation cell value register, Address offset: 0x24 */ + __IO uint32_t CCCR; /*!< SYSCFG compensation cell code register, Address offset: 0x28 */ + +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief JPEG Codec + */ +typedef struct +{ + __IO uint32_t CONFR0; /*!< JPEG Codec Control Register (JPEG_CONFR0), Address offset: 00h */ + __IO uint32_t CONFR1; /*!< JPEG Codec Control Register (JPEG_CONFR1), Address offset: 04h */ + __IO uint32_t CONFR2; /*!< JPEG Codec Control Register (JPEG_CONFR2), Address offset: 08h */ + __IO uint32_t CONFR3; /*!< JPEG Codec Control Register (JPEG_CONFR3), Address offset: 0Ch */ + __IO uint32_t CONFR4; /*!< JPEG Codec Control Register (JPEG_CONFR4), Address offset: 10h */ + __IO uint32_t CONFR5; /*!< JPEG Codec Control Register (JPEG_CONFR5), Address offset: 14h */ + __IO uint32_t CONFR6; /*!< JPEG Codec Control Register (JPEG_CONFR6), Address offset: 18h */ + __IO uint32_t CONFR7; /*!< JPEG Codec Control Register (JPEG_CONFR7), Address offset: 1Ch */ + uint32_t Reserved20[4]; /* Reserved Address offset: 20h-2Ch */ + __IO uint32_t CR; /*!< JPEG Control Register (JPEG_CR), Address offset: 30h */ + __IO uint32_t SR; /*!< JPEG Status Register (JPEG_SR), Address offset: 34h */ + __IO uint32_t CFR; /*!< JPEG Clear Flag Register (JPEG_CFR), Address offset: 38h */ + uint32_t Reserved3c; /* Reserved Address offset: 3Ch */ + __IO uint32_t DIR; /*!< JPEG Data Input Register (JPEG_DIR), Address offset: 40h */ + __IO uint32_t DOR; /*!< JPEG Data Output Register (JPEG_DOR), Address offset: 44h */ + uint32_t Reserved48[2]; /* Reserved Address offset: 48h-4Ch */ + __IO uint32_t QMEM0[16]; /*!< JPEG quantization tables 0, Address offset: 50h-8Ch */ + __IO uint32_t QMEM1[16]; /*!< JPEG quantization tables 1, Address offset: 90h-CCh */ + __IO uint32_t QMEM2[16]; /*!< JPEG quantization tables 2, Address offset: D0h-10Ch */ + __IO uint32_t QMEM3[16]; /*!< JPEG quantization tables 3, Address offset: 110h-14Ch */ + __IO uint32_t HUFFMIN[16]; /*!< JPEG HuffMin tables, Address offset: 150h-18Ch */ + __IO uint32_t HUFFBASE[32]; /*!< JPEG HuffSymb tables, Address offset: 190h-20Ch */ + __IO uint32_t HUFFSYMB[84]; /*!< JPEG HUFFSYMB tables, Address offset: 210h-35Ch */ + __IO uint32_t DHTMEM[103]; /*!< JPEG DHTMem tables, Address offset: 360h-4F8h */ + uint32_t Reserved4FC; /* Reserved Address offset: 4FCh */ + __IO uint32_t HUFFENC_AC0[88]; /*!< JPEG encodor, AC Huffman table 0, Address offset: 500h-65Ch */ + __IO uint32_t HUFFENC_AC1[88]; /*!< JPEG encodor, AC Huffman table 1, Address offset: 660h-7BCh */ + __IO uint32_t HUFFENC_DC0[8]; /*!< JPEG encodor, DC Huffman table 0, Address offset: 7C0h-7DCh */ + __IO uint32_t HUFFENC_DC1[8]; /*!< JPEG encodor, DC Huffman table 1, Address offset: 7E0h-7FCh */ + +} JPEG_TypeDef; + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CSR1; /*!< PWR power control status register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ + __IO uint32_t CR3; /*!< PWR power control register 3, Address offset: 0x0C */ + __IO uint32_t CPUCR; /*!< PWR CPU control register, Address offset: 0x10 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t SRDCR; /*!< PWR SRD domain control register, Address offset: 0x18 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x1C */ + __IO uint32_t WKUPCR; /*!< PWR wakeup clear register, Address offset: 0x20 */ + __IO uint32_t WKUPFR; /*!< PWR wakeup flag register, Address offset: 0x24 */ + __IO uint32_t WKUPEPR; /*!< PWR wakeup enable and polarity register, Address offset: 0x28 */ +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t HSICFGR; /*!< HSI Clock Calibration Register, Address offset: 0x04 */ + __IO uint32_t CRRCR; /*!< Clock Recovery RC Register, Address offset: 0x08 */ + __IO uint32_t CSICFGR; /*!< CSI Clock Calibration Register, Address offset: 0x0C */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x10 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */ + __IO uint32_t CDCFGR1; /*!< RCC Domain 1 configuration register, Address offset: 0x18 */ + __IO uint32_t CDCFGR2; /*!< RCC Domain 2 configuration register, Address offset: 0x1C */ + __IO uint32_t SRDCFGR; /*!< RCC Domain 3 configuration register, Address offset: 0x20 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x24 */ + __IO uint32_t PLLCKSELR; /*!< RCC PLLs Clock Source Selection Register, Address offset: 0x28 */ + __IO uint32_t PLLCFGR; /*!< RCC PLLs Configuration Register, Address offset: 0x2C */ + __IO uint32_t PLL1DIVR; /*!< RCC PLL1 Dividers Configuration Register, Address offset: 0x30 */ + __IO uint32_t PLL1FRACR; /*!< RCC PLL1 Fractional Divider Configuration Register, Address offset: 0x34 */ + __IO uint32_t PLL2DIVR; /*!< RCC PLL2 Dividers Configuration Register, Address offset: 0x38 */ + __IO uint32_t PLL2FRACR; /*!< RCC PLL2 Fractional Divider Configuration Register, Address offset: 0x3C */ + __IO uint32_t PLL3DIVR; /*!< RCC PLL3 Dividers Configuration Register, Address offset: 0x40 */ + __IO uint32_t PLL3FRACR; /*!< RCC PLL3 Fractional Divider Configuration Register, Address offset: 0x44 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x48 */ + __IO uint32_t CDCCIPR; /*!< RCC Domain 1 Kernel Clock Configuration Register Address offset: 0x4C */ + __IO uint32_t CDCCIP1R; /*!< RCC Domain 2 Kernel Clock Configuration Register Address offset: 0x50 */ + __IO uint32_t CDCCIP2R; /*!< RCC Domain 2 Kernel Clock Configuration Register Address offset: 0x54 */ + __IO uint32_t SRDCCIPR; /*!< RCC Domain 3 Kernel Clock Configuration Register Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x5C */ + __IO uint32_t CIER; /*!< RCC Clock Source Interrupt Enable Register Address offset: 0x60 */ + __IO uint32_t CIFR; /*!< RCC Clock Source Interrupt Flag Register Address offset: 0x64 */ + __IO uint32_t CICR; /*!< RCC Clock Source Interrupt Clear Register Address offset: 0x68 */ + uint32_t RESERVED5; /*!< Reserved, Address offset: 0x6C */ + __IO uint32_t BDCR; /*!< RCC Vswitch Backup Domain Control Register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x78 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x7C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x80 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x84 */ + __IO uint32_t AHB4RSTR; /*!< RCC AHB4 peripheral reset register, Address offset: 0x88 */ + __IO uint32_t APB3RSTR; /*!< RCC APB3 peripheral reset register, Address offset: 0x8C */ + __IO uint32_t APB1LRSTR; /*!< RCC APB1 peripheral reset Low Word register, Address offset: 0x90 */ + __IO uint32_t APB1HRSTR; /*!< RCC APB1 peripheral reset High Word register, Address offset: 0x94 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x98 */ + __IO uint32_t APB4RSTR; /*!< RCC APB4 peripheral reset register, Address offset: 0x9C */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0xA0 */ + uint32_t RESERVED8; /*!< Reserved, Address offset: 0xA4 */ + __IO uint32_t SRDAMR; /*!< RCC Domain 3 Autonomous Mode Register, Address offset: 0xA8 */ + uint32_t RESERVED9; /*!< Reserved, 0xAC-0xAF Address offset: 0xAC */ + __IO uint32_t CKGAENR; /*!< AXI Clocks Gating Enable Register, Address offset: 0xB0 */ + uint32_t RESERVED10[31]; /*!< Reserved, 0xAC-0xAF Address offset: 0xAC */ + __IO uint32_t RSR; /*!< RCC Reset status register, Address offset: 0xD0 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0xD4 */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0xD8 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0xDC */ + __IO uint32_t AHB4ENR; /*!< RCC AHB4 peripheral clock register, Address offset: 0xE0 */ + __IO uint32_t APB3ENR; /*!< RCC APB3 peripheral clock register, Address offset: 0xE4 */ + __IO uint32_t APB1LENR; /*!< RCC APB1 peripheral clock Low Word register, Address offset: 0xE8 */ + __IO uint32_t APB1HENR; /*!< RCC APB1 peripheral clock High Word register, Address offset: 0xEC */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock register, Address offset: 0xF0 */ + __IO uint32_t APB4ENR; /*!< RCC APB4 peripheral clock register, Address offset: 0xF4 */ + uint32_t RESERVED12; /*!< Reserved, Address offset: 0xF8 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral sleep clock register, Address offset: 0xFC */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral sleep clock register, Address offset: 0x100 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral sleep clock register, Address offset: 0x104 */ + __IO uint32_t AHB4LPENR; /*!< RCC AHB4 peripheral sleep clock register, Address offset: 0x108 */ + __IO uint32_t APB3LPENR; /*!< RCC APB3 peripheral sleep clock register, Address offset: 0x10C */ + __IO uint32_t APB1LLPENR; /*!< RCC APB1 peripheral sleep clock Low Word register, Address offset: 0x110 */ + __IO uint32_t APB1HLPENR; /*!< RCC APB1 peripheral sleep clock High Word register, Address offset: 0x114 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral sleep clock register, Address offset: 0x118 */ + __IO uint32_t APB4LPENR; /*!< RCC APB4 peripheral sleep clock register, Address offset: 0x11C */ + uint32_t RESERVED13[4]; /*!< Reserved, 0x120-0x12C Address offset: 0x120 */ + +} RCC_TypeDef; + + +/** + * @brief Real-Time Clock + */ +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x08 */ + __IO uint32_t ICSR; /*!< RTC initialization control and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x3C */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x48 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x4C */ + __IO uint32_t SR; /*!< RTC Status register, Address offset: 0x50 */ + __IO uint32_t MISR; /*!< RTC masked interrupt status register, Address offset: 0x54 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x58 */ + __IO uint32_t SCR; /*!< RTC status Clear register, Address offset: 0x5C */ + __IO uint32_t CFGR; /*!< RTC configuration register, Address offset: 0x60 */ +} RTC_TypeDef; + +/** + * @brief Tamper and backup registers + */ +typedef struct +{ + __IO uint32_t CR1; /*!< TAMP configuration register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TAMP configuration register 2, Address offset: 0x04 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x08 */ + __IO uint32_t FLTCR; /*!< TAMP filter control register, Address offset: 0x0C */ + __IO uint32_t ATCR1; /*!< TAMP active tamper control register, Address offset: 0x10 */ + __IO uint32_t ATSEEDR; /*!< TAMP active tamper seed register, Address offset: 0x14 */ + __IO uint32_t ATOR; /*!< TAMP active tamper output register, Address offset: 0x18 */ + uint32_t RESERVED1[4]; /*!< Reserved, Address offset: 0x1C -- 0x28 */ + __IO uint32_t IER; /*!< TAMP interrupt enable register, Address offset: 0x2C */ + __IO uint32_t SR; /*!< TAMP status register, Address offset: 0x30 */ + __IO uint32_t MISR; /*!< TAMP masked interrupt status register, Address offset: 0x34 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x38 */ + __IO uint32_t SCR; /*!< TAMP status clear register, Address offset: 0x3C */ + __IO uint32_t COUNTR; /*!< TAMP monotonic counter register, Address offset: 0x40 */ + uint32_t RESERVED3[3]; /*!< Reserved, Address offset: 0x44 -- 0x4C */ + __IO uint32_t CFGR; /*!< TAMP configuration register, Address offset: 0x50 */ + uint32_t RESERVED4[43]; /*!< Reserved, Address offset: 0x54 -- 0xFC */ + __IO uint32_t BKP0R; /*!< TAMP backup register 0, Address offset: 0x100 */ + __IO uint32_t BKP1R; /*!< TAMP backup register 1, Address offset: 0x104 */ + __IO uint32_t BKP2R; /*!< TAMP backup register 2, Address offset: 0x108 */ + __IO uint32_t BKP3R; /*!< TAMP backup register 3, Address offset: 0x10C */ + __IO uint32_t BKP4R; /*!< TAMP backup register 4, Address offset: 0x110 */ + __IO uint32_t BKP5R; /*!< TAMP backup register 5, Address offset: 0x114 */ + __IO uint32_t BKP6R; /*!< TAMP backup register 6, Address offset: 0x118 */ + __IO uint32_t BKP7R; /*!< TAMP backup register 7, Address offset: 0x11C */ + __IO uint32_t BKP8R; /*!< TAMP backup register 8, Address offset: 0x120 */ + __IO uint32_t BKP9R; /*!< TAMP backup register 9, Address offset: 0x124 */ + __IO uint32_t BKP10R; /*!< TAMP backup register 10, Address offset: 0x128 */ + __IO uint32_t BKP11R; /*!< TAMP backup register 11, Address offset: 0x12C */ + __IO uint32_t BKP12R; /*!< TAMP backup register 12, Address offset: 0x130 */ + __IO uint32_t BKP13R; /*!< TAMP backup register 13, Address offset: 0x134 */ + __IO uint32_t BKP14R; /*!< TAMP backup register 14, Address offset: 0x138 */ + __IO uint32_t BKP15R; /*!< TAMP backup register 15, Address offset: 0x13C */ + __IO uint32_t BKP16R; /*!< TAMP backup register 16, Address offset: 0x140 */ + __IO uint32_t BKP17R; /*!< TAMP backup register 17, Address offset: 0x144 */ + __IO uint32_t BKP18R; /*!< TAMP backup register 18, Address offset: 0x148 */ + __IO uint32_t BKP19R; /*!< TAMP backup register 19, Address offset: 0x14C */ + __IO uint32_t BKP20R; /*!< TAMP backup register 20, Address offset: 0x150 */ + __IO uint32_t BKP21R; /*!< TAMP backup register 21, Address offset: 0x154 */ + __IO uint32_t BKP22R; /*!< TAMP backup register 22, Address offset: 0x158 */ + __IO uint32_t BKP23R; /*!< TAMP backup register 23, Address offset: 0x15C */ + __IO uint32_t BKP24R; /*!< TAMP backup register 24, Address offset: 0x160 */ + __IO uint32_t BKP25R; /*!< TAMP backup register 25, Address offset: 0x164 */ + __IO uint32_t BKP26R; /*!< TAMP backup register 26, Address offset: 0x168 */ + __IO uint32_t BKP27R; /*!< TAMP backup register 27, Address offset: 0x16C */ + __IO uint32_t BKP28R; /*!< TAMP backup register 28, Address offset: 0x170 */ + __IO uint32_t BKP29R; /*!< TAMP backup register 29, Address offset: 0x174 */ + __IO uint32_t BKP30R; /*!< TAMP backup register 30, Address offset: 0x178 */ + __IO uint32_t BKP31R; /*!< TAMP backup register 31, Address offset: 0x17C */ +} TAMP_TypeDef; + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ + uint32_t RESERVED0[16]; /*!< Reserved, 0x04 - 0x43 */ + __IO uint32_t PDMCR; /*!< SAI PDM control register, Address offset: 0x44 */ + __IO uint32_t PDMDLY; /*!< SAI PDM delay register, Address offset: 0x48 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ + uint32_t RESERVED2; /*!< Reserved, 0x1A */ +} SPDIFRX_TypeDef; + + +/** + * @brief Secure digital input/output Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMC clock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + __IO uint32_t ACKTIME; /*!< SDMMC Acknowledgement timer register, Address offset: 0x40 */ + uint32_t RESERVED0[3]; /*!< Reserved, 0x44 - 0x4C - 0x4C */ + __IO uint32_t IDMACTRL; /*!< SDMMC DMA control register, Address offset: 0x50 */ + __IO uint32_t IDMABSIZE; /*!< SDMMC DMA buffer size register, Address offset: 0x54 */ + __IO uint32_t IDMABASE0; /*!< SDMMC DMA buffer 0 base address register, Address offset: 0x58 */ + __IO uint32_t IDMABASE1; /*!< SDMMC DMA buffer 1 base address register, Address offset: 0x5C */ + uint32_t RESERVED1[8]; /*!< Reserved, 0x60-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ + uint32_t RESERVED2[222]; /*!< Reserved, 0x84-0x3F8 */ + __IO uint32_t IPVR; /*!< SDMMC data FIFO register, Address offset: 0x3FC */ +} SDMMC_TypeDef; + + +/** + * @brief Delay Block DLYB + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DELAY BLOCK control register, Address offset: 0x00 */ + __IO uint32_t CFGR; /*!< DELAY BLOCK configuration register, Address offset: 0x04 */ +} DLYB_TypeDef; + +/** + * @brief HW Semaphore HSEM + */ + +typedef struct +{ + __IO uint32_t R[32]; /*!< 2-step write lock and read back registers, Address offset: 00h-7Ch */ + __IO uint32_t RLR[32]; /*!< 1-step read lock registers, Address offset: 80h-FCh */ + __IO uint32_t C1IER; /*!< HSEM Interrupt enable register , Address offset: 100h */ + __IO uint32_t C1ICR; /*!< HSEM Interrupt clear register , Address offset: 104h */ + __IO uint32_t C1ISR; /*!< HSEM Interrupt Status register , Address offset: 108h */ + __IO uint32_t C1MISR; /*!< HSEM Interrupt Masked Status register , Address offset: 10Ch */ + uint32_t Reserved[12]; /* Reserved Address offset: 110h-13Ch */ + __IO uint32_t CR; /*!< HSEM Semaphore clear register , Address offset: 140h */ + __IO uint32_t KEYR; /*!< HSEM Semaphore clear key register , Address offset: 144h */ + +} HSEM_TypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< HSEM interrupt enable register , Address offset: 0h */ + __IO uint32_t ICR; /*!< HSEM interrupt clear register , Address offset: 4h */ + __IO uint32_t ISR; /*!< HSEM interrupt status register , Address offset: 8h */ + __IO uint32_t MISR; /*!< HSEM masked interrupt status register , Address offset: Ch */ +} HSEM_Common_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI/I2S Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ + __IO uint32_t CFG1; /*!< SPI Configuration register 1, Address offset: 0x08 */ + __IO uint32_t CFG2; /*!< SPI Configuration register 2, Address offset: 0x0C */ + __IO uint32_t IER; /*!< SPI/I2S Interrupt Enable register, Address offset: 0x10 */ + __IO uint32_t SR; /*!< SPI/I2S Status register, Address offset: 0x14 */ + __IO uint32_t IFCR; /*!< SPI/I2S Interrupt/Status flags clear register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t TXDR; /*!< SPI/I2S Transmit data register, Address offset: 0x20 */ + uint32_t RESERVED1[3]; /*!< Reserved, 0x24-0x2C */ + __IO uint32_t RXDR; /*!< SPI/I2S Receive data register, Address offset: 0x30 */ + uint32_t RESERVED2[3]; /*!< Reserved, 0x34-0x3C */ + __IO uint32_t CRCPOLY; /*!< SPI CRC Polynomial register, Address offset: 0x40 */ + __IO uint32_t TXCRC; /*!< SPI Transmitter CRC register, Address offset: 0x44 */ + __IO uint32_t RXCRC; /*!< SPI Receiver CRC register, Address offset: 0x48 */ + __IO uint32_t UDRDR; /*!< SPI Underrun data register, Address offset: 0x4C */ + __IO uint32_t I2SCFGR; /*!< I2S Configuration register, Address offset: 0x50 */ + +} SPI_TypeDef; + +/** + * @brief DTS + */ +typedef struct +{ + __IO uint32_t CFGR1; /*!< DTS configuration register, Address offset: 0x00 */ + uint32_t RESERVED0; /*!< Reserved, Address offset: 0x04 */ + __IO uint32_t T0VALR1; /*!< DTS T0 Value register, Address offset: 0x08 */ + uint32_t RESERVED1; /*!< Reserved, Address offset: 0x0C */ + __IO uint32_t RAMPVALR; /*!< DTS Ramp value register, Address offset: 0x10 */ + __IO uint32_t ITR1; /*!< DTS Interrupt threshold register, Address offset: 0x14 */ + uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */ + __IO uint32_t DR; /*!< DTS data register, Address offset: 0x1C */ + __IO uint32_t SR; /*!< DTS status register Address offset: 0x20 */ + __IO uint32_t ITENR; /*!< DTS Interrupt enable register, Address offset: 0x24 */ + __IO uint32_t ICIFR; /*!< DTS Clear Interrupt flag register, Address offset: 0x28 */ + __IO uint32_t OR; /*!< DTS option register 1, Address offset: 0x2C */ +} +DTS_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + uint32_t RESERVED1; /*!< Reserved, 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare register6, Address offset: 0x5C */ + __IO uint32_t AF1; /*!< TIM alternate function option register 1, Address offset: 0x60 */ + __IO uint32_t AF2; /*!< TIM alternate function option register 2, Address offset: 0x64 */ + __IO uint32_t TISEL; /*!< TIM Input Selection register, Address offset: 0x68 */ +} TIM_TypeDef; + +/** + * @brief LPTIMIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ + uint32_t RESERVED1; /*!< Reserved, 0x20 */ + __IO uint32_t CFGR2; /*!< LPTIM Configuration register, Address offset: 0x24 */ +} LPTIM_TypeDef; + +/** + * @brief Comparator + */ +typedef struct +{ + __IO uint32_t SR; /*!< Comparator status register, Address offset: 0x00 */ + __IO uint32_t ICFR; /*!< Comparator interrupt clear flag register, Address offset: 0x04 */ + __IO uint32_t OR; /*!< Comparator option register, Address offset: 0x08 */ +} COMPOPT_TypeDef; + +typedef struct +{ + __IO uint32_t CFGR; /*!< Comparator configuration register , Address offset: 0x00 */ +} COMP_TypeDef; + +typedef struct +{ + __IO uint32_t CFGR; /*!< COMP control and status register, used for bits common to several COMP instances, Address offset: 0x00 */ +} COMP_Common_TypeDef; +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ + __IO uint32_t PRESC; /*!< USART clock Prescaler register, Address offset: 0x2C */ +} USART_TypeDef; + +/** + * @brief Single Wire Protocol Master Interface SPWMI + */ +typedef struct +{ + __IO uint32_t CR; /*!< SWPMI Configuration/Control register, Address offset: 0x00 */ + __IO uint32_t BRR; /*!< SWPMI bitrate register, Address offset: 0x04 */ + uint32_t RESERVED1; /*!< Reserved, 0x08 */ + __IO uint32_t ISR; /*!< SWPMI Interrupt and Status register, Address offset: 0x0C */ + __IO uint32_t ICR; /*!< SWPMI Interrupt Flag Clear register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< SWPMI Interrupt Enable register, Address offset: 0x14 */ + __IO uint32_t RFL; /*!< SWPMI Receive Frame Length register, Address offset: 0x18 */ + __IO uint32_t TDR; /*!< SWPMI Transmit data register, Address offset: 0x1C */ + __IO uint32_t RDR; /*!< SWPMI Receive data register, Address offset: 0x20 */ + __IO uint32_t OR; /*!< SWPMI Option register, Address offset: 0x24 */ +} SWPMI_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief RAM_ECC_Specific_Registers + */ +typedef struct +{ + __IO uint32_t CR; /*!< RAMECC monitor configuration register */ + __IO uint32_t SR; /*!< RAMECC monitor status register */ + __IO uint32_t FAR; /*!< RAMECC monitor failing address register */ + __IO uint32_t FDRL; /*!< RAMECC monitor failing data low register */ + __IO uint32_t FDRH; /*!< RAMECC monitor failing data high register */ + __IO uint32_t FECR; /*!< RAMECC monitor failing ECC error code register */ +} RAMECC_MonitorTypeDef; + +typedef struct +{ + __IO uint32_t IER; /*!< RAMECC interrupt enable register */ +} RAMECC_TypeDef; +/** + * @} + */ + + + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ + uint32_t RESERVED; + __IO uint32_t HTCR; /*!< RNG health test configuration register, Address offset: 0x10 */ +} RNG_TypeDef; + +/** + * @brief MDIOS + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t WRFR; + __IO uint32_t CWRFR; + __IO uint32_t RDFR; + __IO uint32_t CRDFR; + __IO uint32_t SR; + __IO uint32_t CLRFR; + uint32_t RESERVED[57]; + __IO uint32_t DINR0; + __IO uint32_t DINR1; + __IO uint32_t DINR2; + __IO uint32_t DINR3; + __IO uint32_t DINR4; + __IO uint32_t DINR5; + __IO uint32_t DINR6; + __IO uint32_t DINR7; + __IO uint32_t DINR8; + __IO uint32_t DINR9; + __IO uint32_t DINR10; + __IO uint32_t DINR11; + __IO uint32_t DINR12; + __IO uint32_t DINR13; + __IO uint32_t DINR14; + __IO uint32_t DINR15; + __IO uint32_t DINR16; + __IO uint32_t DINR17; + __IO uint32_t DINR18; + __IO uint32_t DINR19; + __IO uint32_t DINR20; + __IO uint32_t DINR21; + __IO uint32_t DINR22; + __IO uint32_t DINR23; + __IO uint32_t DINR24; + __IO uint32_t DINR25; + __IO uint32_t DINR26; + __IO uint32_t DINR27; + __IO uint32_t DINR28; + __IO uint32_t DINR29; + __IO uint32_t DINR30; + __IO uint32_t DINR31; + __IO uint32_t DOUTR0; + __IO uint32_t DOUTR1; + __IO uint32_t DOUTR2; + __IO uint32_t DOUTR3; + __IO uint32_t DOUTR4; + __IO uint32_t DOUTR5; + __IO uint32_t DOUTR6; + __IO uint32_t DOUTR7; + __IO uint32_t DOUTR8; + __IO uint32_t DOUTR9; + __IO uint32_t DOUTR10; + __IO uint32_t DOUTR11; + __IO uint32_t DOUTR12; + __IO uint32_t DOUTR13; + __IO uint32_t DOUTR14; + __IO uint32_t DOUTR15; + __IO uint32_t DOUTR16; + __IO uint32_t DOUTR17; + __IO uint32_t DOUTR18; + __IO uint32_t DOUTR19; + __IO uint32_t DOUTR20; + __IO uint32_t DOUTR21; + __IO uint32_t DOUTR22; + __IO uint32_t DOUTR23; + __IO uint32_t DOUTR24; + __IO uint32_t DOUTR25; + __IO uint32_t DOUTR26; + __IO uint32_t DOUTR27; + __IO uint32_t DOUTR28; + __IO uint32_t DOUTR29; + __IO uint32_t DOUTR30; + __IO uint32_t DOUTR31; +} MDIOS_TypeDef; + + +/** + * @brief USB_OTG_Core_Registers + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ + __IO uint32_t CID; /*!< User ID Register 03Ch */ + __IO uint32_t GSNPSID; /* USB_OTG core ID 040h*/ + __IO uint32_t GHWCFG1; /* User HW config1 044h*/ + __IO uint32_t GHWCFG2; /* User HW config2 048h*/ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ + uint32_t Reserved6; /*!< Reserved 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */ + uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ + __IO uint32_t DCTL; /*!< dev Control Register 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ + uint32_t Reserved0C; /*!< Reserved 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ + uint32_t Reserved20; /*!< Reserved 820h */ + uint32_t Reserved9; /*!< Reserved 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ +} USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ + uint32_t Reserved40C; /*!< Reserved 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ + uint32_t Reserved[2]; /*!< Reserved */ +} USB_OTG_HostChannelTypeDef; +/** + * @} + */ + +/** + * @brief OCTO Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< OCTOSPI Control register, Address offset: 0x000 */ + uint32_t RESERVED; /*!< Reserved, Address offset: 0x004 */ + __IO uint32_t DCR1; /*!< OCTOSPI Device Configuration register 1, Address offset: 0x008 */ + __IO uint32_t DCR2; /*!< OCTOSPI Device Configuration register 2, Address offset: 0x00C */ + __IO uint32_t DCR3; /*!< OCTOSPI Device Configuration register 3, Address offset: 0x010 */ + __IO uint32_t DCR4; /*!< OCTOSPI Device Configuration register 4, Address offset: 0x014 */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x018-0x01C */ + __IO uint32_t SR; /*!< OCTOSPI Status register, Address offset: 0x020 */ + __IO uint32_t FCR; /*!< OCTOSPI Flag Clear register, Address offset: 0x024 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x028-0x03C */ + __IO uint32_t DLR; /*!< OCTOSPI Data Length register, Address offset: 0x040 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x044 */ + __IO uint32_t AR; /*!< OCTOSPI Address register, Address offset: 0x048 */ + uint32_t RESERVED4; /*!< Reserved, Address offset: 0x04C */ + __IO uint32_t DR; /*!< OCTOSPI Data register, Address offset: 0x050 */ + uint32_t RESERVED5[11]; /*!< Reserved, Address offset: 0x054-0x07C */ + __IO uint32_t PSMKR; /*!< OCTOSPI Polling Status Mask register, Address offset: 0x080 */ + uint32_t RESERVED6; /*!< Reserved, Address offset: 0x084 */ + __IO uint32_t PSMAR; /*!< OCTOSPI Polling Status Match register, Address offset: 0x088 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x08C */ + __IO uint32_t PIR; /*!< OCTOSPI Polling Interval register, Address offset: 0x090 */ + uint32_t RESERVED8[27]; /*!< Reserved, Address offset: 0x094-0x0FC */ + __IO uint32_t CCR; /*!< OCTOSPI Communication Configuration register, Address offset: 0x100 */ + uint32_t RESERVED9; /*!< Reserved, Address offset: 0x104 */ + __IO uint32_t TCR; /*!< OCTOSPI Timing Configuration register, Address offset: 0x108 */ + uint32_t RESERVED10; /*!< Reserved, Address offset: 0x10C */ + __IO uint32_t IR; /*!< OCTOSPI Instruction register, Address offset: 0x110 */ + uint32_t RESERVED11[3]; /*!< Reserved, Address offset: 0x114-0x11C */ + __IO uint32_t ABR; /*!< OCTOSPI Alternate Bytes register, Address offset: 0x120 */ + uint32_t RESERVED12[3]; /*!< Reserved, Address offset: 0x124-0x12C */ + __IO uint32_t LPTR; /*!< OCTOSPI Low Power Timeout register, Address offset: 0x130 */ + uint32_t RESERVED13[3]; /*!< Reserved, Address offset: 0x134-0x13C */ + __IO uint32_t WPCCR; /*!< OCTOSPI Wrap Communication Configuration register, Address offset: 0x140 */ + uint32_t RESERVED14; /*!< Reserved, Address offset: 0x144 */ + __IO uint32_t WPTCR; /*!< OCTOSPI Wrap Timing Configuration register, Address offset: 0x148 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x14C */ + __IO uint32_t WPIR; /*!< OCTOSPI Wrap Instruction register, Address offset: 0x150 */ + uint32_t RESERVED16[3]; /*!< Reserved, Address offset: 0x154-0x15C */ + __IO uint32_t WPABR; /*!< OCTOSPI Wrap Alternate Bytes register, Address offset: 0x160 */ + uint32_t RESERVED17[7]; /*!< Reserved, Address offset: 0x164-0x17C */ + __IO uint32_t WCCR; /*!< OCTOSPI Write Communication Configuration register, Address offset: 0x180 */ + uint32_t RESERVED18; /*!< Reserved, Address offset: 0x184 */ + __IO uint32_t WTCR; /*!< OCTOSPI Write Timing Configuration register, Address offset: 0x188 */ + uint32_t RESERVED19; /*!< Reserved, Address offset: 0x18C */ + __IO uint32_t WIR; /*!< OCTOSPI Write Instruction register, Address offset: 0x190 */ + uint32_t RESERVED20[3]; /*!< Reserved, Address offset: 0x194-0x19C */ + __IO uint32_t WABR; /*!< OCTOSPI Write Alternate Bytes register, Address offset: 0x1A0 */ + uint32_t RESERVED21[23]; /*!< Reserved, Address offset: 0x1A4-0x1FC */ + __IO uint32_t HLCR; /*!< OCTOSPI Hyperbus Latency Configuration register, Address offset: 0x200 */ + uint32_t RESERVED22[122]; /*!< Reserved, Address offset: 0x204-0x3EC */ + __IO uint32_t HWCFGR; /*!< OCTOSPI HW Configuration register, Address offset: 0x3F0 */ + __IO uint32_t VER; /*!< OCTOSPI Version register, Address offset: 0x3F4 */ + __IO uint32_t ID; /*!< OCTOSPI Identification register, Address offset: 0x3F8 */ + __IO uint32_t MID; /*!< OCTOPSI HW Magic ID register, Address offset: 0x3FC */ +} OCTOSPI_TypeDef; + +/** + * @} + */ +/** + * @brief OCTO Serial Peripheral Interface IO Manager + */ + +typedef struct +{ + __IO uint32_t CR; /*!< OCTOSPI IO Manager Control register, Address offset: 0x00 */ + __IO uint32_t PCR[3]; /*!< OCTOSPI IO Manager Port[1:3] Configuration register, Address offset: 0x04-0x20 */ +} OCTOSPIM_TypeDef; + +/** + * @} + */ + +/** + * @brief Global Programmer View + */ + +typedef struct +{ + uint32_t RESERVED0[2036]; /*!< Reserved, Address offset: 0x00-0x1FCC */ + __IO uint32_t AXI_PERIPH_ID_4; /*!< AXI interconnect - peripheral ID4 register, Address offset: 0x1FD0 */ + uint32_t AXI_PERIPH_ID_5; /*!< Reserved, Address offset: 0x1FD4 */ + uint32_t AXI_PERIPH_ID_6; /*!< Reserved, Address offset: 0x1FD8 */ + uint32_t AXI_PERIPH_ID_7; /*!< Reserved, Address offset: 0x1FDC */ + __IO uint32_t AXI_PERIPH_ID_0; /*!< AXI interconnect - peripheral ID0 register, Address offset: 0x1FE0 */ + __IO uint32_t AXI_PERIPH_ID_1; /*!< AXI interconnect - peripheral ID1 register, Address offset: 0x1FE4 */ + __IO uint32_t AXI_PERIPH_ID_2; /*!< AXI interconnect - peripheral ID2 register, Address offset: 0x1FE8 */ + __IO uint32_t AXI_PERIPH_ID_3; /*!< AXI interconnect - peripheral ID3 register, Address offset: 0x1FEC */ + __IO uint32_t AXI_COMP_ID_0; /*!< AXI interconnect - component ID0 register, Address offset: 0x1FF0 */ + __IO uint32_t AXI_COMP_ID_1; /*!< AXI interconnect - component ID1 register, Address offset: 0x1FF4 */ + __IO uint32_t AXI_COMP_ID_2; /*!< AXI interconnect - component ID2 register, Address offset: 0x1FF8 */ + __IO uint32_t AXI_COMP_ID_3; /*!< AXI interconnect - component ID3 register, Address offset: 0x1FFC */ + uint32_t RESERVED1[2]; /*!< Reserved, Address offset: 0x2000-0x2004 */ + __IO uint32_t AXI_TARG1_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 1 bus matrix issuing functionality register, Address offset: 0x2008 */ + uint32_t RESERVED2[6]; /*!< Reserved, Address offset: 0x200C-0x2020 */ + __IO uint32_t AXI_TARG1_FN_MOD2; /*!< AXI interconnect - TARG 1 bus matrix functionality 2 register, Address offset: 0x2024 */ + uint32_t RESERVED3; /*!< Reserved, Address offset: 0x2028 */ + __IO uint32_t AXI_TARG1_FN_MOD_LB; /*!< AXI interconnect - TARG 1 long burst functionality modification register, Address offset: 0x202C */ + uint32_t RESERVED4[54]; /*!< Reserved, Address offset: 0x2030-0x2104 */ + __IO uint32_t AXI_TARG1_FN_MOD; /*!< AXI interconnect - TARG 1 issuing functionality modification register, Address offset: 0x2108 */ + uint32_t RESERVED5[959]; /*!< Reserved, Address offset: 0x210C-0x3004 */ + __IO uint32_t AXI_TARG2_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 2 bus matrix issuing functionality register, Address offset: 0x3008 */ + uint32_t RESERVED6[6]; /*!< Reserved, Address offset: 0x300C-0x3020 */ + __IO uint32_t AXI_TARG2_FN_MOD2; /*!< AXI interconnect - TARG 2 bus matrix functionality 2 register, Address offset: 0x3024 */ + uint32_t RESERVED7; /*!< Reserved, Address offset: 0x3028 */ + __IO uint32_t AXI_TARG2_FN_MOD_LB; /*!< AXI interconnect - TARG 2 long burst functionality modification register, Address offset: 0x302C */ + uint32_t RESERVED8[54]; /*!< Reserved, Address offset: 0x3030-0x3104 */ + __IO uint32_t AXI_TARG2_FN_MOD; /*!< AXI interconnect - TARG 2 issuing functionality modification register, Address offset: 0x3108 */ + uint32_t RESERVED9[959]; /*!< Reserved, Address offset: 0x310C-0x4004 */ + __IO uint32_t AXI_TARG3_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 3 bus matrix issuing functionality register, Address offset: 0x4008 */ + uint32_t RESERVED10[1023]; /*!< Reserved, Address offset: 0x400C-0x5004 */ + __IO uint32_t AXI_TARG4_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 4 bus matrix issuing functionality register, Address offset: 0x5008 */ + uint32_t RESERVED11[1023]; /*!< Reserved, Address offset: 0x500C-0x6004 */ + __IO uint32_t AXI_TARG5_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 5 bus matrix issuing functionality register, Address offset: 0x6008 */ + uint32_t RESERVED12[1023]; /*!< Reserved, Address offset: 0x600C-0x7004 */ + __IO uint32_t AXI_TARG6_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 6 bus matrix issuing functionality register, Address offset: 0x7008 */ + uint32_t RESERVED13[1023]; /*!< Reserved, Address offset: 0x700C-0x8004 */ + __IO uint32_t AXI_TARG7_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 7 bus matrix issuing functionality register, Address offset: 0x8008 */ + uint32_t RESERVED14[6]; /*!< Reserved, Address offset: 0x800C-0x8020 */ + __IO uint32_t AXI_TARG7_FN_MOD2; /*!< AXI interconnect - TARG 7 bus matrix functionality 2 register, Address offset: 0x8024 */ + uint32_t RESERVED15; /*!< Reserved, Address offset: 0x8028 */ + __IO uint32_t AXI_TARG7_FN_MOD_LB; /*!< AXI interconnect - TARG 7 long burst functionality modification register, Address offset: 0x802C */ + uint32_t RESERVED16[54]; /*!< Reserved, Address offset: 0x8030-0x8104 */ + __IO uint32_t AXI_TARG7_FN_MOD; /*!< AXI interconnect - TARG 7 issuing functionality modification register, Address offset: 0x8108 */ + uint32_t RESERVED17[959]; /*!< Reserved, Address offset: 0x810C-0x9004 */ + __IO uint32_t AXI_TARG8_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 8 bus matrix issuing functionality register, Address offset: 0x9008 */ + uint32_t RESERVED117[6]; /*!< Reserved, Address offset: 0x900C-0x9020 */ + __IO uint32_t AXI_TARG8_FN_MOD2; /*!< AXI interconnect - TARG 8 bus matrix functionality 2 register, Address offset: 0x9024 */ + uint32_t RESERVED118[56]; /*!< Reserved, Address offset: 0x9028-0x9104 */ + __IO uint32_t AXI_TARG8_FN_MOD; /*!< AXI interconnect - TARG 8 issuing functionality modification register, Address offset: 0x9108 */ + uint32_t RESERVED119[959]; /*!< Reserved, Address offset: 0x910C-0xA004 */ + __IO uint32_t AXI_TARG9_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 9 bus matrix issuing functionality register, Address offset: 0xA008 */ + uint32_t RESERVED120[6]; /*!< Reserved, Address offset: 0xA00C-0xA020 */ + __IO uint32_t AXI_TARG9_FN_MOD2; /*!< AXI interconnect - TARG 9 bus matrix functionality 2 register, Address offset: 0xA024 */ + uint32_t RESERVED121[56]; /*!< Reserved, Address offset: 0xA028-0xA104 */ + __IO uint32_t AXI_TARG9_FN_MOD; /*!< AXI interconnect - TARG 9 issuing functionality modification register, Address offset: 0xA108 */ + uint32_t RESERVED122[959]; /*!< Reserved, Address offset: 0xA10C-0xB004 */ + __IO uint32_t AXI_TARG10_FN_MOD_ISS_BM; /*!< AXI interconnect - TARG 10 bus matrix issuing functionality register, Address offset: 0xB008 */ + uint32_t RESERVED123[6]; /*!< Reserved, Address offset: 0xB00C-0xB020 */ + __IO uint32_t AXI_TARG10_FN_MOD2; /*!< AXI interconnect - TARG 10 bus matrix functionality 2 register, Address offset: 0xB024 */ + uint32_t RESERVED124[56]; /*!< Reserved, Address offset: 0xB028-0xB104 */ + __IO uint32_t AXI_TARG10_FN_MOD; /*!< AXI interconnect - TARG 10 issuing functionality modification register, Address offset: 0xB108 */ + uint32_t RESERVED125[968]; /*!< Reserved, Address offset: 0xB10C-0xC028 */ + __IO uint32_t AXI_TARG10_FN_MOD_LB; /*!< AXI interconnect - TARG 10 long burst functionality modification register, Address offset: 0xC02C */ + uint32_t RESERVED126[55293]; /*!< Reserved, Address offset: 0xC030-0xC104 */ + __IO uint32_t AXI_INI1_FN_MOD2; /*!< AXI interconnect - INI 1 functionality modification 2 register, Address offset: 0x42024 */ + __IO uint32_t AXI_INI1_FN_MOD_AHB; /*!< AXI interconnect - INI 1 AHB functionality modification register, Address offset: 0x42028 */ + uint32_t RESERVED18[53]; /*!< Reserved, Address offset: 0x4202C-0x420FC */ + __IO uint32_t AXI_INI1_READ_QOS; /*!< AXI interconnect - INI 1 read QoS register, Address offset: 0x42100 */ + __IO uint32_t AXI_INI1_WRITE_QOS; /*!< AXI interconnect - INI 1 write QoS register, Address offset: 0x42104 */ + __IO uint32_t AXI_INI1_FN_MOD; /*!< AXI interconnect - INI 1 issuing functionality modification register, Address offset: 0x42108 */ + uint32_t RESERVED19[1021]; /*!< Reserved, Address offset: 0x4210C-0x430FC */ + __IO uint32_t AXI_INI2_READ_QOS; /*!< AXI interconnect - INI 2 read QoS register, Address offset: 0x43100 */ + __IO uint32_t AXI_INI2_WRITE_QOS; /*!< AXI interconnect - INI 2 write QoS register, Address offset: 0x43104 */ + __IO uint32_t AXI_INI2_FN_MOD; /*!< AXI interconnect - INI 2 issuing functionality modification register, Address offset: 0x43108 */ + uint32_t RESERVED20[966]; /*!< Reserved, Address offset: 0x4310C-0x44020 */ + __IO uint32_t AXI_INI3_FN_MOD2; /*!< AXI interconnect - INI 3 functionality modification 2 register, Address offset: 0x44024 */ + __IO uint32_t AXI_INI3_FN_MOD_AHB; /*!< AXI interconnect - INI 3 AHB functionality modification register, Address offset: 0x44028 */ + uint32_t RESERVED21[53]; /*!< Reserved, Address offset: 0x4402C-0x440FC */ + __IO uint32_t AXI_INI3_READ_QOS; /*!< AXI interconnect - INI 3 read QoS register, Address offset: 0x44100 */ + __IO uint32_t AXI_INI3_WRITE_QOS; /*!< AXI interconnect - INI 3 write QoS register, Address offset: 0x44104 */ + __IO uint32_t AXI_INI3_FN_MOD; /*!< AXI interconnect - INI 3 issuing functionality modification register, Address offset: 0x44108 */ + uint32_t RESERVED22[1021]; /*!< Reserved, Address offset: 0x4410C-0x450FC */ + __IO uint32_t AXI_INI4_READ_QOS; /*!< AXI interconnect - INI 4 read QoS register, Address offset: 0x45100 */ + __IO uint32_t AXI_INI4_WRITE_QOS; /*!< AXI interconnect - INI 4 write QoS register, Address offset: 0x45104 */ + __IO uint32_t AXI_INI4_FN_MOD; /*!< AXI interconnect - INI 4 issuing functionality modification register, Address offset: 0x45108 */ + uint32_t RESERVED23[1021]; /*!< Reserved, Address offset: 0x4510C-0x460FC */ + __IO uint32_t AXI_INI5_READ_QOS; /*!< AXI interconnect - INI 5 read QoS register, Address offset: 0x46100 */ + __IO uint32_t AXI_INI5_WRITE_QOS; /*!< AXI interconnect - INI 5 write QoS register, Address offset: 0x46104 */ + __IO uint32_t AXI_INI5_FN_MOD; /*!< AXI interconnect - INI 5 issuing functionality modification register, Address offset: 0x46108 */ + uint32_t RESERVED24[1021]; /*!< Reserved, Address offset: 0x4610C-0x470FC */ + __IO uint32_t AXI_INI6_READ_QOS; /*!< AXI interconnect - INI 6 read QoS register, Address offset: 0x47100 */ + __IO uint32_t AXI_INI6_WRITE_QOS; /*!< AXI interconnect - INI 6 write QoS register, Address offset: 0x47104 */ + __IO uint32_t AXI_INI6_FN_MOD; /*!< AXI interconnect - INI 6 issuing functionality modification register, Address offset: 0x47108 */ + uint32_t RESERVED25[966]; /*!< Reserved, Address offset: 0x4710C-0x48020 */ + __IO uint32_t AXI_INI7_FN_MOD2; /*!< AXI interconnect - INI 7 functionality modification 2 register, Address offset: 0x48024 */ + __IO uint32_t AXI_INI7_FN_MOD_AHB; /*!< AXI interconnect - INI 7 AHB functionality modification register, Address offset: 0x48028 */ + uint32_t RESERVED26[53]; /*!< Reserved, Address offset: 0x4802C-0x480FC */ + __IO uint32_t AXI_INI7_READ_QOS; /*!< AXI interconnect - INI 7 read QoS register, Address offset: 0x48100 */ + __IO uint32_t AXI_INI7_WRITE_QOS; /*!< AXI interconnect - INI 7 write QoS register, Address offset: 0x48104 */ + __IO uint32_t AXI_INI7_FN_MOD; /*!< AXI interconnect - INI 7 issuing functionality modification register, Address offset: 0x48108 */ + +} GPV_TypeDef; + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define CD_ITCMRAM_BASE (0x00000000UL) /*!< Base address of : 64KB RAM reserved for CPU execution/instruction accessible over ITCM */ +#define CD_DTCMRAM_BASE (0x20000000UL) /*!< Base address of : 128KB (2x64KB) system data RAM accessible over DTCM */ +#define CD_AXIFLASH_BASE (0x08000000UL) /*!< Base address of : (up to 2 MB) embedded FLASH memory accessible over AXI */ + +#define CD_AXISRAM1_BASE (0x24000000UL) /*!< Base address of : (up to 256KB) system data RAM1 accessible over over AXI */ +#define CD_AXISRAM2_BASE (0x24040000UL) /*!< Base address of : (up to 384KB) system data RAM2 accessible over over AXI */ +#define CD_AXISRAM3_BASE (0x240A0000UL) /*!< Base address of : (up to 384KB) system data RAM3 accessible over over AXI */ +#define CD_AHBSRAM1_BASE (0x30000000UL) /*!< Base address of : (up to 64KB) system data RAM1 accessible over over AXI->AHB Bridge */ +#define CD_AHBSRAM2_BASE (0x30010000UL) /*!< Base address of : (up to 64KB) system data RAM2 accessible over over AXI->AHB Bridge */ + +#define SRD_BKPSRAM_BASE (0x38800000UL) /*!< Base address of : Backup SRAM(4 KB) over AXI->AHB Bridge */ +#define SRD_SRAM_BASE (0x38000000UL) /*!< Base address of : Backup SRAM(32 KB) over AXI->AHB Bridge */ + +#define OCTOSPI1_BASE (0x90000000UL) /*!< Base address of : OCTOSPI1 memories accessible over AXI */ +#define OCTOSPI2_BASE (0x70000000UL) /*!< Base address of : OCTOSPI2 memories accessible over AXI */ + +#define FLASH_BANK1_BASE (0x08000000UL) /*!< Base address of : (up to 1 MB) Flash Bank1 accessible over AXI */ +#define FLASH_BANK2_BASE (0x08100000UL) /*!< Base address of : (up to 1 MB) Flash Bank2 accessible over AXI */ +#define FLASH_END (0x081FFFFFUL) /*!< FLASH end address */ + +/* Legacy define */ +#define FLASH_BASE FLASH_BANK1_BASE +#define D1_AXISRAM_BASE CD_AXISRAM1_BASE + +#define FLASH_OTP_BASE (0x08FFF000UL) /*!< Base address of : (up to 1KB) embedded FLASH Bank1 OTP Area */ +#define FLASH_OTP_END (0x08FFF3FFUL) /*!< End address of : (up to 1KB) embedded FLASH Bank1 OTP Area */ + + +/*!< Device electronic signature memory map */ +#define UID_BASE (0x08FFF800UL) /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE (0x08FFF80CUL) /*!< FLASH Size register base address */ +#define PACKAGE_BASE (0x08FFF80EUL) /*!< Package Data register base address */ + +#define PERIPH_BASE (0x40000000UL) /*!< Base address of : AHB/ABP Peripherals */ +/*!< Peripheral memory map */ +#define CD_APB1PERIPH_BASE PERIPH_BASE /*!< D2_APB1PERIPH_BASE PERIPH_BASE */ +#define CD_APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) /*!< D2_APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) */ +#define CD_AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) /*!< D2_AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) */ +#define CD_AHB2PERIPH_BASE (PERIPH_BASE + 0x08020000UL) /*!< D2_AHB2PERIPH_BASE (PERIPH_BASE + 0x08020000UL) */ + +#define CD_APB3PERIPH_BASE (PERIPH_BASE + 0x10000000UL) /*!< D1_APB1PERIPH_BASE (PERIPH_BASE + 0x10000000UL) */ +#define CD_AHB3PERIPH_BASE (PERIPH_BASE + 0x12000000UL) /*!< D1_AHB1PERIPH_BASE (PERIPH_BASE + 0x12000000UL) */ + +#define SRD_APB4PERIPH_BASE (PERIPH_BASE + 0x18000000UL) /*!< D3_APB1PERIPH_BASE (PERIPH_BASE + 0x18000000UL) */ +#define SRD_AHB4PERIPH_BASE (PERIPH_BASE + 0x18020000UL) /*!< D3_AHB1PERIPH_BASE (PERIPH_BASE + 0x18020000UL) */ + +/*!< Legacy Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000UL) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000UL) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08020000UL) + +/*!< CD_AHB3PERIPH peripherals */ +#define MDMA_BASE (CD_AHB3PERIPH_BASE + 0x0000UL) +#define DMA2D_BASE (CD_AHB3PERIPH_BASE + 0x1000UL) +#define FLASH_R_BASE (CD_AHB3PERIPH_BASE + 0x2000UL) +#define JPGDEC_BASE (CD_AHB3PERIPH_BASE + 0x3000UL) +#define FMC_R_BASE (CD_AHB3PERIPH_BASE + 0x4000UL) +#define OCTOSPI1_R_BASE (CD_AHB3PERIPH_BASE + 0x5000UL) +#define DLYB_OCTOSPI1_BASE (CD_AHB3PERIPH_BASE + 0x6000UL) +#define SDMMC1_BASE (CD_AHB3PERIPH_BASE + 0x7000UL) +#define DLYB_SDMMC1_BASE (CD_AHB3PERIPH_BASE + 0x8000UL) +#define RAMECC_BASE (CD_AHB3PERIPH_BASE + 0x9000UL) +#define OCTOSPI2_R_BASE (CD_AHB3PERIPH_BASE + 0xA000UL) +#define DLYB_OCTOSPI2_BASE (CD_AHB3PERIPH_BASE + 0xB000UL) +#define OCTOSPIM_BASE (CD_AHB3PERIPH_BASE + 0xB400UL) + +/*!< CD_AHB1PERIPH peripherals */ + +#define DMA1_BASE (CD_AHB1PERIPH_BASE + 0x0000UL) +#define DMA2_BASE (CD_AHB1PERIPH_BASE + 0x0400UL) +#define DMAMUX1_BASE (CD_AHB1PERIPH_BASE + 0x0800UL) +#define ADC1_BASE (CD_AHB1PERIPH_BASE + 0x2000UL) +#define ADC2_BASE (CD_AHB1PERIPH_BASE + 0x2100UL) +#define ADC12_COMMON_BASE (CD_AHB1PERIPH_BASE + 0x2300UL) +#define CRC_BASE (CD_AHB1PERIPH_BASE + 0x3000UL) + +/*!< USB registers base address */ +#define USB1_OTG_HS_PERIPH_BASE (0x40040000UL) +#define USB_OTG_GLOBAL_BASE (0x000UL) +#define USB_OTG_DEVICE_BASE (0x800UL) +#define USB_OTG_IN_ENDPOINT_BASE (0x900UL) +#define USB_OTG_OUT_ENDPOINT_BASE (0xB00UL) +#define USB_OTG_EP_REG_SIZE (0x20UL) +#define USB_OTG_HOST_BASE (0x400UL) +#define USB_OTG_HOST_PORT_BASE (0x440UL) +#define USB_OTG_HOST_CHANNEL_BASE (0x500UL) +#define USB_OTG_HOST_CHANNEL_SIZE (0x20UL) +#define USB_OTG_PCGCCTL_BASE (0xE00UL) +#define USB_OTG_FIFO_BASE (0x1000UL) +#define USB_OTG_FIFO_SIZE (0x1000UL) + +/*!< CD_AHB2PERIPH peripherals */ + +#define DCMI_BASE (CD_AHB2PERIPH_BASE + 0x0000UL) +#define PSSI_BASE (CD_AHB2PERIPH_BASE + 0x0400UL) +#define HSEM_BASE (CD_AHB2PERIPH_BASE + 0x0800UL) +#define RNG_BASE (CD_AHB2PERIPH_BASE + 0x1800UL) +#define SDMMC2_BASE (CD_AHB2PERIPH_BASE + 0x2400UL) +#define DLYB_SDMMC2_BASE (CD_AHB2PERIPH_BASE + 0x2800UL) +#define BDMA1_BASE (CD_AHB2PERIPH_BASE + 0x2C00UL) + +/*!< SRD_AHB4PERIPH peripherals */ +#define GPIOA_BASE (SRD_AHB4PERIPH_BASE + 0x0000UL) +#define GPIOB_BASE (SRD_AHB4PERIPH_BASE + 0x0400UL) +#define GPIOC_BASE (SRD_AHB4PERIPH_BASE + 0x0800UL) +#define GPIOD_BASE (SRD_AHB4PERIPH_BASE + 0x0C00UL) +#define GPIOE_BASE (SRD_AHB4PERIPH_BASE + 0x1000UL) +#define GPIOF_BASE (SRD_AHB4PERIPH_BASE + 0x1400UL) +#define GPIOG_BASE (SRD_AHB4PERIPH_BASE + 0x1800UL) +#define GPIOH_BASE (SRD_AHB4PERIPH_BASE + 0x1C00UL) +#define GPIOI_BASE (SRD_AHB4PERIPH_BASE + 0x2000UL) +#define GPIOJ_BASE (SRD_AHB4PERIPH_BASE + 0x2400UL) +#define GPIOK_BASE (SRD_AHB4PERIPH_BASE + 0x2800UL) +#define RCC_BASE (SRD_AHB4PERIPH_BASE + 0x4400UL) +#define PWR_BASE (SRD_AHB4PERIPH_BASE + 0x4800UL) +#define BDMA2_BASE (SRD_AHB4PERIPH_BASE + 0x5400UL) +#define DMAMUX2_BASE (SRD_AHB4PERIPH_BASE + 0x5800UL) + +/*!< CD_APB3PERIPH peripherals */ +#define LTDC_BASE (CD_APB3PERIPH_BASE + 0x1000UL) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84UL) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104UL) +#define WWDG1_BASE (CD_APB3PERIPH_BASE + 0x3000UL) + +/*!< CD_APB1PERIPH peripherals */ +#define TIM2_BASE (CD_APB1PERIPH_BASE + 0x0000UL) +#define TIM3_BASE (CD_APB1PERIPH_BASE + 0x0400UL) +#define TIM4_BASE (CD_APB1PERIPH_BASE + 0x0800UL) +#define TIM5_BASE (CD_APB1PERIPH_BASE + 0x0C00UL) +#define TIM6_BASE (CD_APB1PERIPH_BASE + 0x1000UL) +#define TIM7_BASE (CD_APB1PERIPH_BASE + 0x1400UL) +#define TIM12_BASE (CD_APB1PERIPH_BASE + 0x1800UL) +#define TIM13_BASE (CD_APB1PERIPH_BASE + 0x1C00UL) +#define TIM14_BASE (CD_APB1PERIPH_BASE + 0x2000UL) +#define LPTIM1_BASE (CD_APB1PERIPH_BASE + 0x2400UL) + +#define SPI2_BASE (CD_APB1PERIPH_BASE + 0x3800UL) +#define SPI3_BASE (CD_APB1PERIPH_BASE + 0x3C00UL) +#define SPDIFRX_BASE (CD_APB1PERIPH_BASE + 0x4000UL) +#define USART2_BASE (CD_APB1PERIPH_BASE + 0x4400UL) +#define USART3_BASE (CD_APB1PERIPH_BASE + 0x4800UL) +#define UART4_BASE (CD_APB1PERIPH_BASE + 0x4C00UL) +#define UART5_BASE (CD_APB1PERIPH_BASE + 0x5000UL) +#define I2C1_BASE (CD_APB1PERIPH_BASE + 0x5400UL) +#define I2C2_BASE (CD_APB1PERIPH_BASE + 0x5800UL) +#define I2C3_BASE (CD_APB1PERIPH_BASE + 0x5C00UL) +#define CEC_BASE (CD_APB1PERIPH_BASE + 0x6C00UL) +#define DAC1_BASE (CD_APB1PERIPH_BASE + 0x7400UL) +#define UART7_BASE (CD_APB1PERIPH_BASE + 0x7800UL) +#define UART8_BASE (CD_APB1PERIPH_BASE + 0x7C00UL) +#define CRS_BASE (CD_APB1PERIPH_BASE + 0x8400UL) +#define SWPMI1_BASE (CD_APB1PERIPH_BASE + 0x8800UL) +#define OPAMP_BASE (CD_APB1PERIPH_BASE + 0x9000UL) +#define OPAMP1_BASE (CD_APB1PERIPH_BASE + 0x9000UL) +#define OPAMP2_BASE (CD_APB1PERIPH_BASE + 0x9010UL) +#define MDIOS_BASE (CD_APB1PERIPH_BASE + 0x9400UL) +#define FDCAN1_BASE (CD_APB1PERIPH_BASE + 0xA000UL) +#define FDCAN2_BASE (CD_APB1PERIPH_BASE + 0xA400UL) +#define FDCAN_CCU_BASE (CD_APB1PERIPH_BASE + 0xA800UL) +#define SRAMCAN_BASE (CD_APB1PERIPH_BASE + 0xAC00UL) + +/*!< CD_APB2PERIPH peripherals */ + +#define TIM1_BASE (CD_APB2PERIPH_BASE + 0x0000UL) +#define TIM8_BASE (CD_APB2PERIPH_BASE + 0x0400UL) +#define USART1_BASE (CD_APB2PERIPH_BASE + 0x1000UL) +#define USART6_BASE (CD_APB2PERIPH_BASE + 0x1400UL) +#define UART9_BASE (CD_APB2PERIPH_BASE + 0x1800UL) +#define USART10_BASE (CD_APB2PERIPH_BASE + 0x1C00UL) +#define SPI1_BASE (CD_APB2PERIPH_BASE + 0x3000UL) +#define SPI4_BASE (CD_APB2PERIPH_BASE + 0x3400UL) +#define TIM15_BASE (CD_APB2PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (CD_APB2PERIPH_BASE + 0x4400UL) +#define TIM17_BASE (CD_APB2PERIPH_BASE + 0x4800UL) +#define SPI5_BASE (CD_APB2PERIPH_BASE + 0x5000UL) +#define SAI1_BASE (CD_APB2PERIPH_BASE + 0x5800UL) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004UL) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024UL) +#define SAI2_BASE (CD_APB2PERIPH_BASE + 0x5C00UL) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004UL) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024UL) +#define DFSDM1_BASE (CD_APB2PERIPH_BASE + 0x7800UL) +#define DFSDM1_Channel0_BASE (DFSDM1_BASE + 0x00UL) +#define DFSDM1_Channel1_BASE (DFSDM1_BASE + 0x20UL) +#define DFSDM1_Channel2_BASE (DFSDM1_BASE + 0x40UL) +#define DFSDM1_Channel3_BASE (DFSDM1_BASE + 0x60UL) +#define DFSDM1_Channel4_BASE (DFSDM1_BASE + 0x80UL) +#define DFSDM1_Channel5_BASE (DFSDM1_BASE + 0xA0UL) +#define DFSDM1_Channel6_BASE (DFSDM1_BASE + 0xC0UL) +#define DFSDM1_Channel7_BASE (DFSDM1_BASE + 0xE0UL) +#define DFSDM1_Filter0_BASE (DFSDM1_BASE + 0x100UL) +#define DFSDM1_Filter1_BASE (DFSDM1_BASE + 0x180UL) +#define DFSDM1_Filter2_BASE (DFSDM1_BASE + 0x200UL) +#define DFSDM1_Filter3_BASE (DFSDM1_BASE + 0x280UL) +#define DFSDM1_Filter4_BASE (DFSDM1_BASE + 0x300UL) +#define DFSDM1_Filter5_BASE (DFSDM1_BASE + 0x380UL) +#define DFSDM1_Filter6_BASE (DFSDM1_BASE + 0x400UL) +#define DFSDM1_Filter7_BASE (DFSDM1_BASE + 0x480UL) +/*!< SRD_APB4PERIPH peripherals */ +#define EXTI_BASE (SRD_APB4PERIPH_BASE + 0x0000UL) +#define EXTI_D1_BASE (EXTI_BASE + 0x0080UL) +#define SYSCFG_BASE (SRD_APB4PERIPH_BASE + 0x0400UL) +#define LPUART1_BASE (SRD_APB4PERIPH_BASE + 0x0C00UL) +#define SPI6_BASE (SRD_APB4PERIPH_BASE + 0x1400UL) +#define I2C4_BASE (SRD_APB4PERIPH_BASE + 0x1C00UL) +#define LPTIM2_BASE (SRD_APB4PERIPH_BASE + 0x2400UL) +#define LPTIM3_BASE (SRD_APB4PERIPH_BASE + 0x2800UL) +#define DAC2_BASE (SRD_APB4PERIPH_BASE + 0x3400UL) +#define COMP12_BASE (SRD_APB4PERIPH_BASE + 0x3800UL) +#define COMP1_BASE (COMP12_BASE + 0x0CUL) +#define COMP2_BASE (COMP12_BASE + 0x10UL) +#define VREFBUF_BASE (SRD_APB4PERIPH_BASE + 0x3C00UL) +#define RTC_BASE (SRD_APB4PERIPH_BASE + 0x4000UL) +#define TAMP_BASE (SRD_APB4PERIPH_BASE + 0x4400UL) +#define IWDG1_BASE (SRD_APB4PERIPH_BASE + 0x4800UL) + +#define DTS_BASE (SRD_APB4PERIPH_BASE + 0x6800UL) + +#define DFSDM2_BASE (SRD_APB4PERIPH_BASE + 0x6C00UL) +#define DFSDM2_Channel0_BASE (DFSDM2_BASE + 0x00UL) +#define DFSDM2_Channel1_BASE (DFSDM2_BASE + 0x20UL) +#define DFSDM2_FLT0_BASE (DFSDM2_BASE + 0x100UL) + +/*!< CD_AHB3PERIPH peripherals */ +#define GFXMMU_BASE (CD_AHB3PERIPH_BASE + 0xC000UL) + +#define BDMA1_Channel0_BASE (BDMA1_BASE + 0x0008UL) +#define BDMA1_Channel1_BASE (BDMA1_BASE + 0x001CUL) +#define BDMA1_Channel2_BASE (BDMA1_BASE + 0x0030UL) +#define BDMA1_Channel3_BASE (BDMA1_BASE + 0x0044UL) +#define BDMA1_Channel4_BASE (BDMA1_BASE + 0x0058UL) +#define BDMA1_Channel5_BASE (BDMA1_BASE + 0x006CUL) +#define BDMA1_Channel6_BASE (BDMA1_BASE + 0x0080UL) +#define BDMA1_Channel7_BASE (BDMA1_BASE + 0x0094UL) + +#define BDMA2_Channel0_BASE (BDMA2_BASE + 0x0008UL) +#define BDMA2_Channel1_BASE (BDMA2_BASE + 0x001CUL) +#define BDMA2_Channel2_BASE (BDMA2_BASE + 0x0030UL) +#define BDMA2_Channel3_BASE (BDMA2_BASE + 0x0044UL) +#define BDMA2_Channel4_BASE (BDMA2_BASE + 0x0058UL) +#define BDMA2_Channel5_BASE (BDMA2_BASE + 0x006CUL) +#define BDMA2_Channel6_BASE (BDMA2_BASE + 0x0080UL) +#define BDMA2_Channel7_BASE (BDMA2_BASE + 0x0094UL) + + +#define DMAMUX2_Channel0_BASE (DMAMUX2_BASE) +#define DMAMUX2_Channel1_BASE (DMAMUX2_BASE + 0x0004UL) +#define DMAMUX2_Channel2_BASE (DMAMUX2_BASE + 0x0008UL) +#define DMAMUX2_Channel3_BASE (DMAMUX2_BASE + 0x000CUL) +#define DMAMUX2_Channel4_BASE (DMAMUX2_BASE + 0x0010UL) +#define DMAMUX2_Channel5_BASE (DMAMUX2_BASE + 0x0014UL) +#define DMAMUX2_Channel6_BASE (DMAMUX2_BASE + 0x0018UL) +#define DMAMUX2_Channel7_BASE (DMAMUX2_BASE + 0x001CUL) + +#define DMAMUX2_RequestGenerator0_BASE (DMAMUX2_BASE + 0x0100UL) +#define DMAMUX2_RequestGenerator1_BASE (DMAMUX2_BASE + 0x0104UL) +#define DMAMUX2_RequestGenerator2_BASE (DMAMUX2_BASE + 0x0108UL) +#define DMAMUX2_RequestGenerator3_BASE (DMAMUX2_BASE + 0x010CUL) +#define DMAMUX2_RequestGenerator4_BASE (DMAMUX2_BASE + 0x0110UL) +#define DMAMUX2_RequestGenerator5_BASE (DMAMUX2_BASE + 0x0114UL) +#define DMAMUX2_RequestGenerator6_BASE (DMAMUX2_BASE + 0x0118UL) +#define DMAMUX2_RequestGenerator7_BASE (DMAMUX2_BASE + 0x011CUL) + +#define DMAMUX2_ChannelStatus_BASE (DMAMUX2_BASE + 0x0080UL) +#define DMAMUX2_RequestGenStatus_BASE (DMAMUX2_BASE + 0x0140UL) + +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010UL) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028UL) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040UL) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058UL) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070UL) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088UL) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0UL) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8UL) + +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010UL) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028UL) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040UL) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058UL) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070UL) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088UL) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0UL) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8UL) + + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x0004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x0008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x0010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x0014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x0018UL) +#define DMAMUX1_Channel7_BASE (DMAMUX1_BASE + 0x001CUL) +#define DMAMUX1_Channel8_BASE (DMAMUX1_BASE + 0x0020UL) +#define DMAMUX1_Channel9_BASE (DMAMUX1_BASE + 0x0024UL) +#define DMAMUX1_Channel10_BASE (DMAMUX1_BASE + 0x0028UL) +#define DMAMUX1_Channel11_BASE (DMAMUX1_BASE + 0x002CUL) +#define DMAMUX1_Channel12_BASE (DMAMUX1_BASE + 0x0030UL) +#define DMAMUX1_Channel13_BASE (DMAMUX1_BASE + 0x0034UL) +#define DMAMUX1_Channel14_BASE (DMAMUX1_BASE + 0x0038UL) +#define DMAMUX1_Channel15_BASE (DMAMUX1_BASE + 0x003CUL) + +#define DMAMUX1_RequestGenerator0_BASE (DMAMUX1_BASE + 0x0100UL) +#define DMAMUX1_RequestGenerator1_BASE (DMAMUX1_BASE + 0x0104UL) +#define DMAMUX1_RequestGenerator2_BASE (DMAMUX1_BASE + 0x0108UL) +#define DMAMUX1_RequestGenerator3_BASE (DMAMUX1_BASE + 0x010CUL) +#define DMAMUX1_RequestGenerator4_BASE (DMAMUX1_BASE + 0x0110UL) +#define DMAMUX1_RequestGenerator5_BASE (DMAMUX1_BASE + 0x0114UL) +#define DMAMUX1_RequestGenerator6_BASE (DMAMUX1_BASE + 0x0118UL) +#define DMAMUX1_RequestGenerator7_BASE (DMAMUX1_BASE + 0x011CUL) + +#define DMAMUX1_ChannelStatus_BASE (DMAMUX1_BASE + 0x0080UL) +#define DMAMUX1_RequestGenStatus_BASE (DMAMUX1_BASE + 0x0140UL) + +/*!< FMC Banks registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000UL) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104UL) +#define FMC_Bank2_R_BASE (FMC_R_BASE + 0x0060UL) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080UL) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140UL) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE (0x5C001000UL) + +#define MDMA_Channel0_BASE (MDMA_BASE + 0x00000040UL) +#define MDMA_Channel1_BASE (MDMA_BASE + 0x00000080UL) +#define MDMA_Channel2_BASE (MDMA_BASE + 0x000000C0UL) +#define MDMA_Channel3_BASE (MDMA_BASE + 0x00000100UL) +#define MDMA_Channel4_BASE (MDMA_BASE + 0x00000140UL) +#define MDMA_Channel5_BASE (MDMA_BASE + 0x00000180UL) +#define MDMA_Channel6_BASE (MDMA_BASE + 0x000001C0UL) +#define MDMA_Channel7_BASE (MDMA_BASE + 0x00000200UL) +#define MDMA_Channel8_BASE (MDMA_BASE + 0x00000240UL) +#define MDMA_Channel9_BASE (MDMA_BASE + 0x00000280UL) +#define MDMA_Channel10_BASE (MDMA_BASE + 0x000002C0UL) +#define MDMA_Channel11_BASE (MDMA_BASE + 0x00000300UL) +#define MDMA_Channel12_BASE (MDMA_BASE + 0x00000340UL) +#define MDMA_Channel13_BASE (MDMA_BASE + 0x00000380UL) +#define MDMA_Channel14_BASE (MDMA_BASE + 0x000003C0UL) +#define MDMA_Channel15_BASE (MDMA_BASE + 0x00000400UL) +#define MDMA_Channel16_BASE (MDMA_BASE + 0x00000440UL) + +/* GFXMMU virtual buffers base address */ +#define GFXMMU_VIRTUAL_BUFFERS_BASE (0x25000000UL) +#define GFXMMU_VIRTUAL_BUFFER0_BASE (GFXMMU_VIRTUAL_BUFFERS_BASE) +#define GFXMMU_VIRTUAL_BUFFER1_BASE (GFXMMU_VIRTUAL_BUFFERS_BASE + 0x400000UL) +#define GFXMMU_VIRTUAL_BUFFER2_BASE (GFXMMU_VIRTUAL_BUFFERS_BASE + 0x800000UL) +#define GFXMMU_VIRTUAL_BUFFER3_BASE (GFXMMU_VIRTUAL_BUFFERS_BASE + 0xC00000UL) + +#define RAMECC_Monitor1_BASE (RAMECC_BASE + 0x20UL) +#define RAMECC_Monitor2_BASE (RAMECC_BASE + 0x40UL) +#define RAMECC_Monitor3_BASE (RAMECC_BASE + 0x60UL) + + +#define GPV_BASE (PERIPH_BASE + 0x11000000UL) /*!< GPV_BASE (PERIPH_BASE + 0x11000000UL) */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define VREFBUF ((VREFBUF_TypeDef *) VREFBUF_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define TAMP ((TAMP_TypeDef *) TAMP_BASE) +#define WWDG1 ((WWDG_TypeDef *) WWDG1_BASE) + + +#define IWDG1 ((IWDG_TypeDef *) IWDG1_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define USART10 ((USART_TypeDef *) USART10_BASE) +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define UART9 ((USART_TypeDef *) UART9_BASE) +#define CRS ((CRS_TypeDef *) CRS_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define FDCAN1 ((FDCAN_GlobalTypeDef *) FDCAN1_BASE) +#define FDCAN2 ((FDCAN_GlobalTypeDef *) FDCAN2_BASE) +#define FDCAN_CCU ((FDCAN_ClockCalibrationUnit_TypeDef *) FDCAN_CCU_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC1 ((DAC_TypeDef *) DAC1_BASE) +#define LPUART1 ((USART_TypeDef *) LPUART1_BASE) +#define SWPMI1 ((SWPMI_TypeDef *) SWPMI1_BASE) +#define LPTIM2 ((LPTIM_TypeDef *) LPTIM2_BASE) +#define LPTIM3 ((LPTIM_TypeDef *) LPTIM3_BASE) +#define DTS ((DTS_TypeDef *) DTS_BASE) + +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define COMP12 ((COMPOPT_TypeDef *) COMP12_BASE) +#define COMP1 ((COMP_TypeDef *) COMP1_BASE) +#define COMP2 ((COMP_TypeDef *) COMP2_BASE) +#define COMP12_COMMON ((COMP_Common_TypeDef *) COMP2_BASE) +#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) +#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE) +#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE) + + +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define EXTI_D1 ((EXTI_Core_TypeDef *) EXTI_D1_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM15 ((TIM_TypeDef *) TIM15_BASE) +#define TIM16 ((TIM_TypeDef *) TIM16_BASE) +#define TIM17 ((TIM_TypeDef *) TIM17_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) + +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define DFSDM1_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel0_BASE) +#define DFSDM1_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel1_BASE) +#define DFSDM1_Channel2 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel2_BASE) +#define DFSDM1_Channel3 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel3_BASE) +#define DFSDM1_Channel4 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel4_BASE) +#define DFSDM1_Channel5 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel5_BASE) +#define DFSDM1_Channel6 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel6_BASE) +#define DFSDM1_Channel7 ((DFSDM_Channel_TypeDef *) DFSDM1_Channel7_BASE) +#define DFSDM1_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter0_BASE) +#define DFSDM1_Filter1 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter1_BASE) +#define DFSDM1_Filter2 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter2_BASE) +#define DFSDM1_Filter3 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter3_BASE) +#define DFSDM1_Filter4 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter4_BASE) +#define DFSDM1_Filter5 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter5_BASE) +#define DFSDM1_Filter6 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter6_BASE) +#define DFSDM1_Filter7 ((DFSDM_Filter_TypeDef *) DFSDM1_Filter7_BASE) +#define DFSDM2_Channel0 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel0_BASE) +#define DFSDM2_Channel1 ((DFSDM_Channel_TypeDef *) DFSDM2_Channel1_BASE) +#define DFSDM2_Filter0 ((DFSDM_Filter_TypeDef *) DFSDM2_FLT0_BASE) +#define DMA2D ((DMA2D_TypeDef *) DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define PSSI ((PSSI_TypeDef *) PSSI_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) + +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC12_COMMON_BASE) + +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) +#define DLYB_SDMMC2 ((DLYB_TypeDef *) DLYB_SDMMC2_BASE) + +#define BDMA1 ((BDMA_TypeDef *) BDMA1_BASE) +#define BDMA1_Channel0 ((BDMA_Channel_TypeDef *) BDMA1_Channel0_BASE) +#define BDMA1_Channel1 ((BDMA_Channel_TypeDef *) BDMA1_Channel1_BASE) +#define BDMA1_Channel2 ((BDMA_Channel_TypeDef *) BDMA1_Channel2_BASE) +#define BDMA1_Channel3 ((BDMA_Channel_TypeDef *) BDMA1_Channel3_BASE) +#define BDMA1_Channel4 ((BDMA_Channel_TypeDef *) BDMA1_Channel4_BASE) +#define BDMA1_Channel5 ((BDMA_Channel_TypeDef *) BDMA1_Channel5_BASE) +#define BDMA1_Channel6 ((BDMA_Channel_TypeDef *) BDMA1_Channel6_BASE) +#define BDMA1_Channel7 ((BDMA_Channel_TypeDef *) BDMA1_Channel7_BASE) + +#define BDMA2 ((BDMA_TypeDef *) BDMA2_BASE) +#define BDMA2_Channel0 ((BDMA_Channel_TypeDef *) BDMA2_Channel0_BASE) +#define BDMA2_Channel1 ((BDMA_Channel_TypeDef *) BDMA2_Channel1_BASE) +#define BDMA2_Channel2 ((BDMA_Channel_TypeDef *) BDMA2_Channel2_BASE) +#define BDMA2_Channel3 ((BDMA_Channel_TypeDef *) BDMA2_Channel3_BASE) +#define BDMA2_Channel4 ((BDMA_Channel_TypeDef *) BDMA2_Channel4_BASE) +#define BDMA2_Channel5 ((BDMA_Channel_TypeDef *) BDMA2_Channel5_BASE) +#define BDMA2_Channel6 ((BDMA_Channel_TypeDef *) BDMA2_Channel6_BASE) +#define BDMA2_Channel7 ((BDMA_Channel_TypeDef *) BDMA2_Channel7_BASE) + +#define RAMECC ((RAMECC_TypeDef *)RAMECC_BASE) +#define RAMECC_Monitor1 ((RAMECC_MonitorTypeDef *)RAMECC_Monitor1_BASE) +#define RAMECC_Monitor2 ((RAMECC_MonitorTypeDef *)RAMECC_Monitor2_BASE) +#define RAMECC_Monitor3 ((RAMECC_MonitorTypeDef *)RAMECC_Monitor3_BASE) + +#define DMAMUX2 ((DMAMUX_Channel_TypeDef *) DMAMUX2_BASE) +#define DMAMUX2_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel0_BASE) +#define DMAMUX2_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel1_BASE) +#define DMAMUX2_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel2_BASE) +#define DMAMUX2_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel3_BASE) +#define DMAMUX2_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel4_BASE) +#define DMAMUX2_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel5_BASE) +#define DMAMUX2_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel6_BASE) +#define DMAMUX2_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX2_Channel7_BASE) + + +#define DMAMUX2_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator0_BASE) +#define DMAMUX2_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator1_BASE) +#define DMAMUX2_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator2_BASE) +#define DMAMUX2_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator3_BASE) +#define DMAMUX2_RequestGenerator4 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator4_BASE) +#define DMAMUX2_RequestGenerator5 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator5_BASE) +#define DMAMUX2_RequestGenerator6 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator6_BASE) +#define DMAMUX2_RequestGenerator7 ((DMAMUX_RequestGen_TypeDef *) DMAMUX2_RequestGenerator7_BASE) + +#define DMAMUX2_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX2_ChannelStatus_BASE) +#define DMAMUX2_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX2_RequestGenStatus_BASE) + +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) + +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) + + +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) +#define DMAMUX1_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel7_BASE) +#define DMAMUX1_Channel8 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel8_BASE) +#define DMAMUX1_Channel9 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel9_BASE) +#define DMAMUX1_Channel10 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel10_BASE) +#define DMAMUX1_Channel11 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel11_BASE) +#define DMAMUX1_Channel12 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel12_BASE) +#define DMAMUX1_Channel13 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel13_BASE) +#define DMAMUX1_Channel14 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel14_BASE) +#define DMAMUX1_Channel15 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel15_BASE) + +#define DMAMUX1_RequestGenerator0 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator0_BASE) +#define DMAMUX1_RequestGenerator1 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator1_BASE) +#define DMAMUX1_RequestGenerator2 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator2_BASE) +#define DMAMUX1_RequestGenerator3 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator3_BASE) +#define DMAMUX1_RequestGenerator4 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator4_BASE) +#define DMAMUX1_RequestGenerator5 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator5_BASE) +#define DMAMUX1_RequestGenerator6 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator6_BASE) +#define DMAMUX1_RequestGenerator7 ((DMAMUX_RequestGen_TypeDef *) DMAMUX1_RequestGenerator7_BASE) + +#define DMAMUX1_ChannelStatus ((DMAMUX_ChannelStatus_TypeDef *) DMAMUX1_ChannelStatus_BASE) +#define DMAMUX1_RequestGenStatus ((DMAMUX_RequestGenStatus_TypeDef *) DMAMUX1_RequestGenStatus_BASE) + + +#define FMC_Bank1_R ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E_R ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank2_R ((FMC_Bank2_TypeDef *) FMC_Bank2_R_BASE) +#define FMC_Bank3_R ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6_R ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) + +#define DAC2 ((DAC_TypeDef *) DAC2_BASE) +#define OCTOSPI1 ((OCTOSPI_TypeDef *) OCTOSPI1_R_BASE) +#define DLYB_OCTOSPI1 ((DLYB_TypeDef *) DLYB_OCTOSPI1_BASE) +#define OCTOSPI2 ((OCTOSPI_TypeDef *) OCTOSPI2_R_BASE) +#define DLYB_OCTOSPI2 ((DLYB_TypeDef *) DLYB_OCTOSPI2_BASE) +#define OCTOSPIM ((OCTOSPIM_TypeDef *) OCTOSPIM_BASE) +#define GFXMMU ((GFXMMU_TypeDef *) GFXMMU_BASE) + +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define DLYB_SDMMC1 ((DLYB_TypeDef *) DLYB_SDMMC1_BASE) + +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +#define JPEG ((JPEG_TypeDef *) JPGDEC_BASE) +#define HSEM ((HSEM_TypeDef *) HSEM_BASE) +#define HSEM_COMMON ((HSEM_Common_TypeDef *) (HSEM_BASE + 0x100UL)) + +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) + +#define MDIOS ((MDIOS_TypeDef *) MDIOS_BASE) + +#define MDMA ((MDMA_TypeDef *)MDMA_BASE) +#define MDMA_Channel0 ((MDMA_Channel_TypeDef *)MDMA_Channel0_BASE) +#define MDMA_Channel1 ((MDMA_Channel_TypeDef *)MDMA_Channel1_BASE) +#define MDMA_Channel2 ((MDMA_Channel_TypeDef *)MDMA_Channel2_BASE) +#define MDMA_Channel3 ((MDMA_Channel_TypeDef *)MDMA_Channel3_BASE) +#define MDMA_Channel4 ((MDMA_Channel_TypeDef *)MDMA_Channel4_BASE) +#define MDMA_Channel5 ((MDMA_Channel_TypeDef *)MDMA_Channel5_BASE) +#define MDMA_Channel6 ((MDMA_Channel_TypeDef *)MDMA_Channel6_BASE) +#define MDMA_Channel7 ((MDMA_Channel_TypeDef *)MDMA_Channel7_BASE) +#define MDMA_Channel8 ((MDMA_Channel_TypeDef *)MDMA_Channel8_BASE) +#define MDMA_Channel9 ((MDMA_Channel_TypeDef *)MDMA_Channel9_BASE) +#define MDMA_Channel10 ((MDMA_Channel_TypeDef *)MDMA_Channel10_BASE) +#define MDMA_Channel11 ((MDMA_Channel_TypeDef *)MDMA_Channel11_BASE) +#define MDMA_Channel12 ((MDMA_Channel_TypeDef *)MDMA_Channel12_BASE) +#define MDMA_Channel13 ((MDMA_Channel_TypeDef *)MDMA_Channel13_BASE) +#define MDMA_Channel14 ((MDMA_Channel_TypeDef *)MDMA_Channel14_BASE) +#define MDMA_Channel15 ((MDMA_Channel_TypeDef *)MDMA_Channel15_BASE) + + +#define USB1_OTG_HS ((USB_OTG_GlobalTypeDef *) USB1_OTG_HS_PERIPH_BASE) + +/* Legacy defines */ +#define USB_OTG_HS USB1_OTG_HS +#define USB_OTG_HS_PERIPH_BASE USB1_OTG_HS_PERIPH_BASE + +#define GPV ((GPV_TypeDef *) GPV_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Hardware_Constant_Definition + * @{ + */ +#define LSI_STARTUP_TIME 130U /*!< LSI Maximum startup time in us */ + + /** + * @} + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************************* ADC VERSION ********************************/ +#define ADC_VER_V5_3 +/******************** Bit definition for ADC_ISR register ********************/ +#define ADC_ISR_ADRDY_Pos (0U) +#define ADC_ISR_ADRDY_Msk (0x1UL << ADC_ISR_ADRDY_Pos) /*!< 0x00000001 */ +#define ADC_ISR_ADRDY ADC_ISR_ADRDY_Msk /*!< ADC Ready (ADRDY) flag */ +#define ADC_ISR_EOSMP_Pos (1U) +#define ADC_ISR_EOSMP_Msk (0x1UL << ADC_ISR_EOSMP_Pos) /*!< 0x00000002 */ +#define ADC_ISR_EOSMP ADC_ISR_EOSMP_Msk /*!< ADC End of Sampling flag */ +#define ADC_ISR_EOC_Pos (2U) +#define ADC_ISR_EOC_Msk (0x1UL << ADC_ISR_EOC_Pos) /*!< 0x00000004 */ +#define ADC_ISR_EOC ADC_ISR_EOC_Msk /*!< ADC End of Regular Conversion flag */ +#define ADC_ISR_EOS_Pos (3U) +#define ADC_ISR_EOS_Msk (0x1UL << ADC_ISR_EOS_Pos) /*!< 0x00000008 */ +#define ADC_ISR_EOS ADC_ISR_EOS_Msk /*!< ADC End of Regular sequence of Conversions flag */ +#define ADC_ISR_OVR_Pos (4U) +#define ADC_ISR_OVR_Msk (0x1UL << ADC_ISR_OVR_Pos) /*!< 0x00000010 */ +#define ADC_ISR_OVR ADC_ISR_OVR_Msk /*!< ADC overrun flag */ +#define ADC_ISR_JEOC_Pos (5U) +#define ADC_ISR_JEOC_Msk (0x1UL << ADC_ISR_JEOC_Pos) /*!< 0x00000020 */ +#define ADC_ISR_JEOC ADC_ISR_JEOC_Msk /*!< ADC End of Injected Conversion flag */ +#define ADC_ISR_JEOS_Pos (6U) +#define ADC_ISR_JEOS_Msk (0x1UL << ADC_ISR_JEOS_Pos) /*!< 0x00000040 */ +#define ADC_ISR_JEOS ADC_ISR_JEOS_Msk /*!< ADC End of Injected sequence of Conversions flag */ +#define ADC_ISR_AWD1_Pos (7U) +#define ADC_ISR_AWD1_Msk (0x1UL << ADC_ISR_AWD1_Pos) /*!< 0x00000080 */ +#define ADC_ISR_AWD1 ADC_ISR_AWD1_Msk /*!< ADC Analog watchdog 1 flag */ +#define ADC_ISR_AWD2_Pos (8U) +#define ADC_ISR_AWD2_Msk (0x1UL << ADC_ISR_AWD2_Pos) /*!< 0x00000100 */ +#define ADC_ISR_AWD2 ADC_ISR_AWD2_Msk /*!< ADC Analog watchdog 2 flag */ +#define ADC_ISR_AWD3_Pos (9U) +#define ADC_ISR_AWD3_Msk (0x1UL << ADC_ISR_AWD3_Pos) /*!< 0x00000200 */ +#define ADC_ISR_AWD3 ADC_ISR_AWD3_Msk /*!< ADC Analog watchdog 3 flag */ +#define ADC_ISR_JQOVF_Pos (10U) +#define ADC_ISR_JQOVF_Msk (0x1UL << ADC_ISR_JQOVF_Pos) /*!< 0x00000400 */ +#define ADC_ISR_JQOVF ADC_ISR_JQOVF_Msk /*!< ADC Injected Context Queue Overflow flag */ +#define ADC_ISR_LDORDY_Pos (12U) +#define ADC_ISR_LDORDY_Msk (0x1UL << ADC_ISR_LDORDY_Pos) /*!< 0x00001000 */ +#define ADC_ISR_LDORDY ADC_ISR_LDORDY_Msk /*!< ADC LDO output voltage ready bit */ + +/******************** Bit definition for ADC_IER register ********************/ +#define ADC_IER_ADRDYIE_Pos (0U) +#define ADC_IER_ADRDYIE_Msk (0x1UL << ADC_IER_ADRDYIE_Pos) /*!< 0x00000001 */ +#define ADC_IER_ADRDYIE ADC_IER_ADRDYIE_Msk /*!< ADC Ready (ADRDY) interrupt source */ +#define ADC_IER_EOSMPIE_Pos (1U) +#define ADC_IER_EOSMPIE_Msk (0x1UL << ADC_IER_EOSMPIE_Pos) /*!< 0x00000002 */ +#define ADC_IER_EOSMPIE ADC_IER_EOSMPIE_Msk /*!< ADC End of Sampling interrupt source */ +#define ADC_IER_EOCIE_Pos (2U) +#define ADC_IER_EOCIE_Msk (0x1UL << ADC_IER_EOCIE_Pos) /*!< 0x00000004 */ +#define ADC_IER_EOCIE ADC_IER_EOCIE_Msk /*!< ADC End of Regular Conversion interrupt source */ +#define ADC_IER_EOSIE_Pos (3U) +#define ADC_IER_EOSIE_Msk (0x1UL << ADC_IER_EOSIE_Pos) /*!< 0x00000008 */ +#define ADC_IER_EOSIE ADC_IER_EOSIE_Msk /*!< ADC End of Regular sequence of Conversions interrupt source */ +#define ADC_IER_OVRIE_Pos (4U) +#define ADC_IER_OVRIE_Msk (0x1UL << ADC_IER_OVRIE_Pos) /*!< 0x00000010 */ +#define ADC_IER_OVRIE ADC_IER_OVRIE_Msk /*!< ADC overrun interrupt source */ +#define ADC_IER_JEOCIE_Pos (5U) +#define ADC_IER_JEOCIE_Msk (0x1UL << ADC_IER_JEOCIE_Pos) /*!< 0x00000020 */ +#define ADC_IER_JEOCIE ADC_IER_JEOCIE_Msk /*!< ADC End of Injected Conversion interrupt source */ +#define ADC_IER_JEOSIE_Pos (6U) +#define ADC_IER_JEOSIE_Msk (0x1UL << ADC_IER_JEOSIE_Pos) /*!< 0x00000040 */ +#define ADC_IER_JEOSIE ADC_IER_JEOSIE_Msk /*!< ADC End of Injected sequence of Conversions interrupt source */ +#define ADC_IER_AWD1IE_Pos (7U) +#define ADC_IER_AWD1IE_Msk (0x1UL << ADC_IER_AWD1IE_Pos) /*!< 0x00000080 */ +#define ADC_IER_AWD1IE ADC_IER_AWD1IE_Msk /*!< ADC Analog watchdog 1 interrupt source */ +#define ADC_IER_AWD2IE_Pos (8U) +#define ADC_IER_AWD2IE_Msk (0x1UL << ADC_IER_AWD2IE_Pos) /*!< 0x00000100 */ +#define ADC_IER_AWD2IE ADC_IER_AWD2IE_Msk /*!< ADC Analog watchdog 2 interrupt source */ +#define ADC_IER_AWD3IE_Pos (9U) +#define ADC_IER_AWD3IE_Msk (0x1UL << ADC_IER_AWD3IE_Pos) /*!< 0x00000200 */ +#define ADC_IER_AWD3IE ADC_IER_AWD3IE_Msk /*!< ADC Analog watchdog 3 interrupt source */ +#define ADC_IER_JQOVFIE_Pos (10U) +#define ADC_IER_JQOVFIE_Msk (0x1UL << ADC_IER_JQOVFIE_Pos) /*!< 0x00000400 */ +#define ADC_IER_JQOVFIE ADC_IER_JQOVFIE_Msk /*!< ADC Injected Context Queue Overflow interrupt source */ + +/******************** Bit definition for ADC_CR register ********************/ +#define ADC_CR_ADEN_Pos (0U) +#define ADC_CR_ADEN_Msk (0x1UL << ADC_CR_ADEN_Pos) /*!< 0x00000001 */ +#define ADC_CR_ADEN ADC_CR_ADEN_Msk /*!< ADC Enable control */ +#define ADC_CR_ADDIS_Pos (1U) +#define ADC_CR_ADDIS_Msk (0x1UL << ADC_CR_ADDIS_Pos) /*!< 0x00000002 */ +#define ADC_CR_ADDIS ADC_CR_ADDIS_Msk /*!< ADC Disable command */ +#define ADC_CR_ADSTART_Pos (2U) +#define ADC_CR_ADSTART_Msk (0x1UL << ADC_CR_ADSTART_Pos) /*!< 0x00000004 */ +#define ADC_CR_ADSTART ADC_CR_ADSTART_Msk /*!< ADC Start of Regular conversion */ +#define ADC_CR_JADSTART_Pos (3U) +#define ADC_CR_JADSTART_Msk (0x1UL << ADC_CR_JADSTART_Pos) /*!< 0x00000008 */ +#define ADC_CR_JADSTART ADC_CR_JADSTART_Msk /*!< ADC Start of injected conversion */ +#define ADC_CR_ADSTP_Pos (4U) +#define ADC_CR_ADSTP_Msk (0x1UL << ADC_CR_ADSTP_Pos) /*!< 0x00000010 */ +#define ADC_CR_ADSTP ADC_CR_ADSTP_Msk /*!< ADC Stop of Regular conversion */ +#define ADC_CR_JADSTP_Pos (5U) +#define ADC_CR_JADSTP_Msk (0x1UL << ADC_CR_JADSTP_Pos) /*!< 0x00000020 */ +#define ADC_CR_JADSTP ADC_CR_JADSTP_Msk /*!< ADC Stop of injected conversion */ +#define ADC_CR_BOOST_Pos (8U) +#define ADC_CR_BOOST_Msk (0x3UL << ADC_CR_BOOST_Pos) /*!< 0x00000300 */ +#define ADC_CR_BOOST ADC_CR_BOOST_Msk /*!< ADC Boost Mode configuration */ +#define ADC_CR_BOOST_0 (0x1UL << ADC_CR_BOOST_Pos) /*!< 0x00000100 */ +#define ADC_CR_BOOST_1 (0x2UL << ADC_CR_BOOST_Pos) /*!< 0x00000200 */ +#define ADC_CR_ADCALLIN_Pos (16U) +#define ADC_CR_ADCALLIN_Msk (0x1UL << ADC_CR_ADCALLIN_Pos) /*!< 0x00010000 */ +#define ADC_CR_ADCALLIN ADC_CR_ADCALLIN_Msk /*!< ADC Linearity calibration */ +#define ADC_CR_LINCALRDYW1_Pos (22U) +#define ADC_CR_LINCALRDYW1_Msk (0x1UL << ADC_CR_LINCALRDYW1_Pos) /*!< 0x00400000 */ +#define ADC_CR_LINCALRDYW1 ADC_CR_LINCALRDYW1_Msk /*!< ADC Linearity calibration ready Word 1 */ +#define ADC_CR_LINCALRDYW2_Pos (23U) +#define ADC_CR_LINCALRDYW2_Msk (0x1UL << ADC_CR_LINCALRDYW2_Pos) /*!< 0x00800000 */ +#define ADC_CR_LINCALRDYW2 ADC_CR_LINCALRDYW2_Msk /*!< ADC Linearity calibration ready Word 2 */ +#define ADC_CR_LINCALRDYW3_Pos (24U) +#define ADC_CR_LINCALRDYW3_Msk (0x1UL << ADC_CR_LINCALRDYW3_Pos) /*!< 0x01000000 */ +#define ADC_CR_LINCALRDYW3 ADC_CR_LINCALRDYW3_Msk /*!< ADC Linearity calibration ready Word 3 */ +#define ADC_CR_LINCALRDYW4_Pos (25U) +#define ADC_CR_LINCALRDYW4_Msk (0x1UL << ADC_CR_LINCALRDYW4_Pos) /*!< 0x02000000 */ +#define ADC_CR_LINCALRDYW4 ADC_CR_LINCALRDYW4_Msk /*!< ADC Linearity calibration ready Word 4 */ +#define ADC_CR_LINCALRDYW5_Pos (26U) +#define ADC_CR_LINCALRDYW5_Msk (0x1UL << ADC_CR_LINCALRDYW5_Pos) /*!< 0x04000000 */ +#define ADC_CR_LINCALRDYW5 ADC_CR_LINCALRDYW5_Msk /*!< ADC Linearity calibration ready Word 5 */ +#define ADC_CR_LINCALRDYW6_Pos (27U) +#define ADC_CR_LINCALRDYW6_Msk (0x1UL << ADC_CR_LINCALRDYW6_Pos) /*!< 0x08000000 */ +#define ADC_CR_LINCALRDYW6 ADC_CR_LINCALRDYW6_Msk /*!< ADC Linearity calibration ready Word 6 */ +#define ADC_CR_ADVREGEN_Pos (28U) +#define ADC_CR_ADVREGEN_Msk (0x1UL << ADC_CR_ADVREGEN_Pos) /*!< 0x10000000 */ +#define ADC_CR_ADVREGEN ADC_CR_ADVREGEN_Msk /*!< ADC Voltage regulator Enable */ +#define ADC_CR_DEEPPWD_Pos (29U) +#define ADC_CR_DEEPPWD_Msk (0x1UL << ADC_CR_DEEPPWD_Pos) /*!< 0x20000000 */ +#define ADC_CR_DEEPPWD ADC_CR_DEEPPWD_Msk /*!< ADC Deep power down Enable */ +#define ADC_CR_ADCALDIF_Pos (30U) +#define ADC_CR_ADCALDIF_Msk (0x1UL << ADC_CR_ADCALDIF_Pos) /*!< 0x40000000 */ +#define ADC_CR_ADCALDIF ADC_CR_ADCALDIF_Msk /*!< ADC Differential Mode for calibration */ +#define ADC_CR_ADCAL_Pos (31U) +#define ADC_CR_ADCAL_Msk (0x1UL << ADC_CR_ADCAL_Pos) /*!< 0x80000000 */ +#define ADC_CR_ADCAL ADC_CR_ADCAL_Msk /*!< ADC Calibration */ + +/******************** Bit definition for ADC_CFGR register ********************/ +#define ADC_CFGR_DMNGT_Pos (0U) +#define ADC_CFGR_DMNGT_Msk (0x3UL << ADC_CFGR_DMNGT_Pos) /*!< 0x00000003 */ +#define ADC_CFGR_DMNGT ADC_CFGR_DMNGT_Msk /*!< ADC Data Management configuration */ +#define ADC_CFGR_DMNGT_0 (0x1UL << ADC_CFGR_DMNGT_Pos) /*!< 0x00000001 */ +#define ADC_CFGR_DMNGT_1 (0x2UL << ADC_CFGR_DMNGT_Pos) /*!< 0x00000002 */ + +#define ADC_CFGR_RES_Pos (2U) +#define ADC_CFGR_RES_Msk (0x7UL << ADC_CFGR_RES_Pos) /*!< 0x0000001C */ +#define ADC_CFGR_RES ADC_CFGR_RES_Msk /*!< ADC Data resolution */ +#define ADC_CFGR_RES_0 (0x1UL << ADC_CFGR_RES_Pos) /*!< 0x00000004 */ +#define ADC_CFGR_RES_1 (0x2UL << ADC_CFGR_RES_Pos) /*!< 0x00000008 */ +#define ADC_CFGR_RES_2 (0x4UL << ADC_CFGR_RES_Pos) /*!< 0x00000010 */ + +#define ADC_CFGR_EXTSEL_Pos (5U) +#define ADC_CFGR_EXTSEL_Msk (0x1FUL << ADC_CFGR_EXTSEL_Pos) /*!< 0x000003E0 */ +#define ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_Msk /*!< ADC External trigger selection for regular group */ +#define ADC_CFGR_EXTSEL_0 (0x01UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_CFGR_EXTSEL_1 (0x02UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000040 */ +#define ADC_CFGR_EXTSEL_2 (0x04UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000080 */ +#define ADC_CFGR_EXTSEL_3 (0x08UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000100 */ +#define ADC_CFGR_EXTSEL_4 (0x10UL << ADC_CFGR_EXTSEL_Pos) /*!< 0x00000200 */ + +#define ADC_CFGR_EXTEN_Pos (10U) +#define ADC_CFGR_EXTEN_Msk (0x3UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000C00 */ +#define ADC_CFGR_EXTEN ADC_CFGR_EXTEN_Msk /*!< ADC External trigger enable and polarity selection for regular channels */ +#define ADC_CFGR_EXTEN_0 (0x1UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000400 */ +#define ADC_CFGR_EXTEN_1 (0x2UL << ADC_CFGR_EXTEN_Pos) /*!< 0x00000800 */ + +#define ADC_CFGR_OVRMOD_Pos (12U) +#define ADC_CFGR_OVRMOD_Msk (0x1UL << ADC_CFGR_OVRMOD_Pos) /*!< 0x00001000 */ +#define ADC_CFGR_OVRMOD ADC_CFGR_OVRMOD_Msk /*!< ADC overrun mode */ +#define ADC_CFGR_CONT_Pos (13U) +#define ADC_CFGR_CONT_Msk (0x1UL << ADC_CFGR_CONT_Pos) /*!< 0x00002000 */ +#define ADC_CFGR_CONT ADC_CFGR_CONT_Msk /*!< ADC Single/continuous conversion mode for regular conversion */ +#define ADC_CFGR_AUTDLY_Pos (14U) +#define ADC_CFGR_AUTDLY_Msk (0x1UL << ADC_CFGR_AUTDLY_Pos) /*!< 0x00004000 */ +#define ADC_CFGR_AUTDLY ADC_CFGR_AUTDLY_Msk /*!< ADC Delayed conversion mode */ + +#define ADC_CFGR_DISCEN_Pos (16U) +#define ADC_CFGR_DISCEN_Msk (0x1UL << ADC_CFGR_DISCEN_Pos) /*!< 0x00010000 */ +#define ADC_CFGR_DISCEN ADC_CFGR_DISCEN_Msk /*!< ADC Discontinuous mode for regular channels */ + +#define ADC_CFGR_DISCNUM_Pos (17U) +#define ADC_CFGR_DISCNUM_Msk (0x7UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x000E0000 */ +#define ADC_CFGR_DISCNUM ADC_CFGR_DISCNUM_Msk /*!< ADC Discontinuous mode channel count */ +#define ADC_CFGR_DISCNUM_0 (0x1UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00020000 */ +#define ADC_CFGR_DISCNUM_1 (0x2UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00040000 */ +#define ADC_CFGR_DISCNUM_2 (0x4UL << ADC_CFGR_DISCNUM_Pos) /*!< 0x00080000 */ + +#define ADC_CFGR_JDISCEN_Pos (20U) +#define ADC_CFGR_JDISCEN_Msk (0x1UL << ADC_CFGR_JDISCEN_Pos) /*!< 0x00100000 */ +#define ADC_CFGR_JDISCEN ADC_CFGR_JDISCEN_Msk /*!< ADC Discontinuous mode on injected channels */ +#define ADC_CFGR_JQM_Pos (21U) +#define ADC_CFGR_JQM_Msk (0x1UL << ADC_CFGR_JQM_Pos) /*!< 0x00200000 */ +#define ADC_CFGR_JQM ADC_CFGR_JQM_Msk /*!< ADC JSQR Queue mode */ +#define ADC_CFGR_AWD1SGL_Pos (22U) +#define ADC_CFGR_AWD1SGL_Msk (0x1UL << ADC_CFGR_AWD1SGL_Pos) /*!< 0x00400000 */ +#define ADC_CFGR_AWD1SGL ADC_CFGR_AWD1SGL_Msk /*!< Enable the watchdog 1 on a single channel or on all channels */ +#define ADC_CFGR_AWD1EN_Pos (23U) +#define ADC_CFGR_AWD1EN_Msk (0x1UL << ADC_CFGR_AWD1EN_Pos) /*!< 0x00800000 */ +#define ADC_CFGR_AWD1EN ADC_CFGR_AWD1EN_Msk /*!< ADC Analog watchdog 1 enable on regular Channels */ +#define ADC_CFGR_JAWD1EN_Pos (24U) +#define ADC_CFGR_JAWD1EN_Msk (0x1UL << ADC_CFGR_JAWD1EN_Pos) /*!< 0x01000000 */ +#define ADC_CFGR_JAWD1EN ADC_CFGR_JAWD1EN_Msk /*!< ADC Analog watchdog 1 enable on injected Channels */ +#define ADC_CFGR_JAUTO_Pos (25U) +#define ADC_CFGR_JAUTO_Msk (0x1UL << ADC_CFGR_JAUTO_Pos) /*!< 0x02000000 */ +#define ADC_CFGR_JAUTO ADC_CFGR_JAUTO_Msk /*!< ADC Automatic injected group conversion */ + +#define ADC_CFGR_AWD1CH_Pos (26U) +#define ADC_CFGR_AWD1CH_Msk (0x1FUL << ADC_CFGR_AWD1CH_Pos) /*!< 0x7C000000 */ +#define ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_Msk /*!< ADC Analog watchdog 1 Channel selection */ +#define ADC_CFGR_AWD1CH_0 (0x01UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x04000000 */ +#define ADC_CFGR_AWD1CH_1 (0x02UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x08000000 */ +#define ADC_CFGR_AWD1CH_2 (0x04UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x10000000 */ +#define ADC_CFGR_AWD1CH_3 (0x08UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x20000000 */ +#define ADC_CFGR_AWD1CH_4 (0x10UL << ADC_CFGR_AWD1CH_Pos) /*!< 0x40000000 */ + +#define ADC_CFGR_JQDIS_Pos (31U) +#define ADC_CFGR_JQDIS_Msk (0x1UL << ADC_CFGR_JQDIS_Pos) /*!< 0x80000000 */ +#define ADC_CFGR_JQDIS ADC_CFGR_JQDIS_Msk /*!< ADC Injected queue disable */ + +/******************** Bit definition for ADC_CFGR2 register ********************/ +#define ADC_CFGR2_ROVSE_Pos (0U) +#define ADC_CFGR2_ROVSE_Msk (0x1UL << ADC_CFGR2_ROVSE_Pos) /*!< 0x00000001 */ +#define ADC_CFGR2_ROVSE ADC_CFGR2_ROVSE_Msk /*!< ADC Regular group oversampler enable */ +#define ADC_CFGR2_JOVSE_Pos (1U) +#define ADC_CFGR2_JOVSE_Msk (0x1UL << ADC_CFGR2_JOVSE_Pos) /*!< 0x00000002 */ +#define ADC_CFGR2_JOVSE ADC_CFGR2_JOVSE_Msk /*!< ADC Injected group oversampler enable */ + +#define ADC_CFGR2_OVSS_Pos (5U) +#define ADC_CFGR2_OVSS_Msk (0xFUL << ADC_CFGR2_OVSS_Pos) /*!< 0x000001E0 */ +#define ADC_CFGR2_OVSS ADC_CFGR2_OVSS_Msk /*!< ADC Regular Oversampling shift */ +#define ADC_CFGR2_OVSS_0 (0x1UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000020 */ +#define ADC_CFGR2_OVSS_1 (0x2UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000040 */ +#define ADC_CFGR2_OVSS_2 (0x4UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000080 */ +#define ADC_CFGR2_OVSS_3 (0x8UL << ADC_CFGR2_OVSS_Pos) /*!< 0x00000100 */ + +#define ADC_CFGR2_TROVS_Pos (9U) +#define ADC_CFGR2_TROVS_Msk (0x1UL << ADC_CFGR2_TROVS_Pos) /*!< 0x00000200 */ +#define ADC_CFGR2_TROVS ADC_CFGR2_TROVS_Msk /*!< ADC Triggered regular Oversampling */ +#define ADC_CFGR2_ROVSM_Pos (10U) +#define ADC_CFGR2_ROVSM_Msk (0x1UL << ADC_CFGR2_ROVSM_Pos) /*!< 0x00000400 */ +#define ADC_CFGR2_ROVSM ADC_CFGR2_ROVSM_Msk /*!< ADC Regular oversampling mode */ + +#define ADC_CFGR2_RSHIFT1_Pos (11U) +#define ADC_CFGR2_RSHIFT1_Msk (0x1UL << ADC_CFGR2_RSHIFT1_Pos) /*!< 0x00000800 */ +#define ADC_CFGR2_RSHIFT1 ADC_CFGR2_RSHIFT1_Msk /*!< ADC Right-shift data after Offset 1 correction */ +#define ADC_CFGR2_RSHIFT2_Pos (12U) +#define ADC_CFGR2_RSHIFT2_Msk (0x1UL << ADC_CFGR2_RSHIFT2_Pos) /*!< 0x00001000 */ +#define ADC_CFGR2_RSHIFT2 ADC_CFGR2_RSHIFT2_Msk /*!< ADC Right-shift data after Offset 2 correction */ +#define ADC_CFGR2_RSHIFT3_Pos (13U) +#define ADC_CFGR2_RSHIFT3_Msk (0x1UL << ADC_CFGR2_RSHIFT3_Pos) /*!< 0x00002000 */ +#define ADC_CFGR2_RSHIFT3 ADC_CFGR2_RSHIFT3_Msk /*!< ADC Right-shift data after Offset 3 correction */ +#define ADC_CFGR2_RSHIFT4_Pos (14U) +#define ADC_CFGR2_RSHIFT4_Msk (0x1UL << ADC_CFGR2_RSHIFT4_Pos) /*!< 0x00004000 */ +#define ADC_CFGR2_RSHIFT4 ADC_CFGR2_RSHIFT4_Msk /*!< ADC Right-shift data after Offset 4 correction */ + +#define ADC_CFGR2_OVSR_Pos (16U) +#define ADC_CFGR2_OVSR_Msk (0x3FFUL << ADC_CFGR2_OVSR_Pos) /*!< 0x03FF0000 */ +#define ADC_CFGR2_OVSR ADC_CFGR2_OVSR_Msk /*!< ADC oversampling Ratio */ +#define ADC_CFGR2_OVSR_0 (0x001UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00010000 */ +#define ADC_CFGR2_OVSR_1 (0x002UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00020000 */ +#define ADC_CFGR2_OVSR_2 (0x004UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00040000 */ +#define ADC_CFGR2_OVSR_3 (0x008UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00080000 */ +#define ADC_CFGR2_OVSR_4 (0x010UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00100000 */ +#define ADC_CFGR2_OVSR_5 (0x020UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00200000 */ +#define ADC_CFGR2_OVSR_6 (0x040UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00400000 */ +#define ADC_CFGR2_OVSR_7 (0x080UL << ADC_CFGR2_OVSR_Pos) /*!< 0x00800000 */ +#define ADC_CFGR2_OVSR_8 (0x100UL << ADC_CFGR2_OVSR_Pos) /*!< 0x01000000 */ +#define ADC_CFGR2_OVSR_9 (0x200UL << ADC_CFGR2_OVSR_Pos) /*!< 0x02000000 */ + +#define ADC_CFGR2_LSHIFT_Pos (28U) +#define ADC_CFGR2_LSHIFT_Msk (0xFUL << ADC_CFGR2_LSHIFT_Pos) /*!< 0xF0000000 */ +#define ADC_CFGR2_LSHIFT ADC_CFGR2_LSHIFT_Msk /*!< ADC Left shift factor */ +#define ADC_CFGR2_LSHIFT_0 (0x1UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x10000000 */ +#define ADC_CFGR2_LSHIFT_1 (0x2UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x20000000 */ +#define ADC_CFGR2_LSHIFT_2 (0x4UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x40000000 */ +#define ADC_CFGR2_LSHIFT_3 (0x8UL << ADC_CFGR2_LSHIFT_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_SMPR1 register ********************/ +#define ADC_SMPR1_SMP0_Pos (0U) +#define ADC_SMPR1_SMP0_Msk (0x7UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000007 */ +#define ADC_SMPR1_SMP0 ADC_SMPR1_SMP0_Msk /*!< ADC Channel 0 Sampling time selection */ +#define ADC_SMPR1_SMP0_0 (0x1UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000001 */ +#define ADC_SMPR1_SMP0_1 (0x2UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000002 */ +#define ADC_SMPR1_SMP0_2 (0x4UL << ADC_SMPR1_SMP0_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR1_SMP1_Pos (3U) +#define ADC_SMPR1_SMP1_Msk (0x7UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000038 */ +#define ADC_SMPR1_SMP1 ADC_SMPR1_SMP1_Msk /*!< ADC Channel 1 Sampling time selection */ +#define ADC_SMPR1_SMP1_0 (0x1UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000008 */ +#define ADC_SMPR1_SMP1_1 (0x2UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000010 */ +#define ADC_SMPR1_SMP1_2 (0x4UL << ADC_SMPR1_SMP1_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR1_SMP2_Pos (6U) +#define ADC_SMPR1_SMP2_Msk (0x7UL << ADC_SMPR1_SMP2_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR1_SMP2 ADC_SMPR1_SMP2_Msk /*!< ADC Channel 2 Sampling time selection */ +#define ADC_SMPR1_SMP2_0 (0x1UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000040 */ +#define ADC_SMPR1_SMP2_1 (0x2UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000080 */ +#define ADC_SMPR1_SMP2_2 (0x4UL << ADC_SMPR1_SMP2_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR1_SMP3_Pos (9U) +#define ADC_SMPR1_SMP3_Msk (0x7UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR1_SMP3 ADC_SMPR1_SMP3_Msk /*!< ADC Channel 3 Sampling time selection */ +#define ADC_SMPR1_SMP3_0 (0x1UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000200 */ +#define ADC_SMPR1_SMP3_1 (0x2UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000400 */ +#define ADC_SMPR1_SMP3_2 (0x4UL << ADC_SMPR1_SMP3_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR1_SMP4_Pos (12U) +#define ADC_SMPR1_SMP4_Msk (0x7UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00007000 */ +#define ADC_SMPR1_SMP4 ADC_SMPR1_SMP4_Msk /*!< ADC Channel 4 Sampling time selection */ +#define ADC_SMPR1_SMP4_0 (0x1UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00001000 */ +#define ADC_SMPR1_SMP4_1 (0x2UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00002000 */ +#define ADC_SMPR1_SMP4_2 (0x4UL << ADC_SMPR1_SMP4_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR1_SMP5_Pos (15U) +#define ADC_SMPR1_SMP5_Msk (0x7UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00038000 */ +#define ADC_SMPR1_SMP5 ADC_SMPR1_SMP5_Msk /*!< ADC Channel 5 Sampling time selection */ +#define ADC_SMPR1_SMP5_0 (0x1UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00008000 */ +#define ADC_SMPR1_SMP5_1 (0x2UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00010000 */ +#define ADC_SMPR1_SMP5_2 (0x4UL << ADC_SMPR1_SMP5_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR1_SMP6_Pos (18U) +#define ADC_SMPR1_SMP6_Msk (0x7UL << ADC_SMPR1_SMP6_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR1_SMP6 ADC_SMPR1_SMP6_Msk /*!< ADC Channel 6 Sampling time selection */ +#define ADC_SMPR1_SMP6_0 (0x1UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00040000 */ +#define ADC_SMPR1_SMP6_1 (0x2UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00080000 */ +#define ADC_SMPR1_SMP6_2 (0x4UL << ADC_SMPR1_SMP6_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR1_SMP7_Pos (21U) +#define ADC_SMPR1_SMP7_Msk (0x7UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR1_SMP7 ADC_SMPR1_SMP7_Msk /*!< ADC Channel 7 Sampling time selection */ +#define ADC_SMPR1_SMP7_0 (0x1UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00200000 */ +#define ADC_SMPR1_SMP7_1 (0x2UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00400000 */ +#define ADC_SMPR1_SMP7_2 (0x4UL << ADC_SMPR1_SMP7_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR1_SMP8_Pos (24U) +#define ADC_SMPR1_SMP8_Msk (0x7UL << ADC_SMPR1_SMP8_Pos) /*!< 0x07000000 */ +#define ADC_SMPR1_SMP8 ADC_SMPR1_SMP8_Msk /*!< ADC Channel 8 Sampling time selection */ +#define ADC_SMPR1_SMP8_0 (0x1UL << ADC_SMPR1_SMP8_Pos) /*!< 0x01000000 */ +#define ADC_SMPR1_SMP8_1 (0x2UL << ADC_SMPR1_SMP8_Pos) /*!< 0x02000000 */ +#define ADC_SMPR1_SMP8_2 (0x4UL << ADC_SMPR1_SMP8_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR1_SMP9_Pos (27U) +#define ADC_SMPR1_SMP9_Msk (0x7UL << ADC_SMPR1_SMP9_Pos) /*!< 0x38000000 */ +#define ADC_SMPR1_SMP9 ADC_SMPR1_SMP9_Msk /*!< ADC Channel 9 Sampling time selection */ +#define ADC_SMPR1_SMP9_0 (0x1UL << ADC_SMPR1_SMP9_Pos) /*!< 0x08000000 */ +#define ADC_SMPR1_SMP9_1 (0x2UL << ADC_SMPR1_SMP9_Pos) /*!< 0x10000000 */ +#define ADC_SMPR1_SMP9_2 (0x4UL << ADC_SMPR1_SMP9_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_SMPR2 register ********************/ +#define ADC_SMPR2_SMP10_Pos (0U) +#define ADC_SMPR2_SMP10_Msk (0x7UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000007 */ +#define ADC_SMPR2_SMP10 ADC_SMPR2_SMP10_Msk /*!< ADC Channel 10 Sampling time selection */ +#define ADC_SMPR2_SMP10_0 (0x1UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000001 */ +#define ADC_SMPR2_SMP10_1 (0x2UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000002 */ +#define ADC_SMPR2_SMP10_2 (0x4UL << ADC_SMPR2_SMP10_Pos) /*!< 0x00000004 */ + +#define ADC_SMPR2_SMP11_Pos (3U) +#define ADC_SMPR2_SMP11_Msk (0x7UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000038 */ +#define ADC_SMPR2_SMP11 ADC_SMPR2_SMP11_Msk /*!< ADC Channel 11 Sampling time selection */ +#define ADC_SMPR2_SMP11_0 (0x1UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000008 */ +#define ADC_SMPR2_SMP11_1 (0x2UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000010 */ +#define ADC_SMPR2_SMP11_2 (0x4UL << ADC_SMPR2_SMP11_Pos) /*!< 0x00000020 */ + +#define ADC_SMPR2_SMP12_Pos (6U) +#define ADC_SMPR2_SMP12_Msk (0x7UL << ADC_SMPR2_SMP12_Pos) /*!< 0x000001C0 */ +#define ADC_SMPR2_SMP12 ADC_SMPR2_SMP12_Msk /*!< ADC Channel 12 Sampling time selection */ +#define ADC_SMPR2_SMP12_0 (0x1UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000040 */ +#define ADC_SMPR2_SMP12_1 (0x2UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000080 */ +#define ADC_SMPR2_SMP12_2 (0x4UL << ADC_SMPR2_SMP12_Pos) /*!< 0x00000100 */ + +#define ADC_SMPR2_SMP13_Pos (9U) +#define ADC_SMPR2_SMP13_Msk (0x7UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000E00 */ +#define ADC_SMPR2_SMP13 ADC_SMPR2_SMP13_Msk /*!< ADC Channel 13 Sampling time selection */ +#define ADC_SMPR2_SMP13_0 (0x1UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000200 */ +#define ADC_SMPR2_SMP13_1 (0x2UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000400 */ +#define ADC_SMPR2_SMP13_2 (0x4UL << ADC_SMPR2_SMP13_Pos) /*!< 0x00000800 */ + +#define ADC_SMPR2_SMP14_Pos (12U) +#define ADC_SMPR2_SMP14_Msk (0x7UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00007000 */ +#define ADC_SMPR2_SMP14 ADC_SMPR2_SMP14_Msk /*!< ADC Channel 14 Sampling time selection */ +#define ADC_SMPR2_SMP14_0 (0x1UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00001000 */ +#define ADC_SMPR2_SMP14_1 (0x2UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00002000 */ +#define ADC_SMPR2_SMP14_2 (0x4UL << ADC_SMPR2_SMP14_Pos) /*!< 0x00004000 */ + +#define ADC_SMPR2_SMP15_Pos (15U) +#define ADC_SMPR2_SMP15_Msk (0x7UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00038000 */ +#define ADC_SMPR2_SMP15 ADC_SMPR2_SMP15_Msk /*!< ADC Channel 15 Sampling time selection */ +#define ADC_SMPR2_SMP15_0 (0x1UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00008000 */ +#define ADC_SMPR2_SMP15_1 (0x2UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00010000 */ +#define ADC_SMPR2_SMP15_2 (0x4UL << ADC_SMPR2_SMP15_Pos) /*!< 0x00020000 */ + +#define ADC_SMPR2_SMP16_Pos (18U) +#define ADC_SMPR2_SMP16_Msk (0x7UL << ADC_SMPR2_SMP16_Pos) /*!< 0x001C0000 */ +#define ADC_SMPR2_SMP16 ADC_SMPR2_SMP16_Msk /*!< ADC Channel 16 Sampling time selection */ +#define ADC_SMPR2_SMP16_0 (0x1UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00040000 */ +#define ADC_SMPR2_SMP16_1 (0x2UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00080000 */ +#define ADC_SMPR2_SMP16_2 (0x4UL << ADC_SMPR2_SMP16_Pos) /*!< 0x00100000 */ + +#define ADC_SMPR2_SMP17_Pos (21U) +#define ADC_SMPR2_SMP17_Msk (0x7UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00E00000 */ +#define ADC_SMPR2_SMP17 ADC_SMPR2_SMP17_Msk /*!< ADC Channel 17 Sampling time selection */ +#define ADC_SMPR2_SMP17_0 (0x1UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00200000 */ +#define ADC_SMPR2_SMP17_1 (0x2UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00400000 */ +#define ADC_SMPR2_SMP17_2 (0x4UL << ADC_SMPR2_SMP17_Pos) /*!< 0x00800000 */ + +#define ADC_SMPR2_SMP18_Pos (24U) +#define ADC_SMPR2_SMP18_Msk (0x7UL << ADC_SMPR2_SMP18_Pos) /*!< 0x07000000 */ +#define ADC_SMPR2_SMP18 ADC_SMPR2_SMP18_Msk /*!< ADC Channel 18 Sampling time selection */ +#define ADC_SMPR2_SMP18_0 (0x1UL << ADC_SMPR2_SMP18_Pos) /*!< 0x01000000 */ +#define ADC_SMPR2_SMP18_1 (0x2UL << ADC_SMPR2_SMP18_Pos) /*!< 0x02000000 */ +#define ADC_SMPR2_SMP18_2 (0x4UL << ADC_SMPR2_SMP18_Pos) /*!< 0x04000000 */ + +#define ADC_SMPR2_SMP19_Pos (27U) +#define ADC_SMPR2_SMP19_Msk (0x7UL << ADC_SMPR2_SMP19_Pos) /*!< 0x38000000 */ +#define ADC_SMPR2_SMP19 ADC_SMPR2_SMP19_Msk /*!< ADC Channel 19 Sampling time selection */ +#define ADC_SMPR2_SMP19_0 (0x1UL << ADC_SMPR2_SMP19_Pos) /*!< 0x08000000 */ +#define ADC_SMPR2_SMP19_1 (0x2UL << ADC_SMPR2_SMP19_Pos) /*!< 0x10000000 */ +#define ADC_SMPR2_SMP19_2 (0x4UL << ADC_SMPR2_SMP19_Pos) /*!< 0x20000000 */ + +/******************** Bit definition for ADC_PCSEL register ********************/ +#define ADC_PCSEL_PCSEL_Pos (0U) +#define ADC_PCSEL_PCSEL_Msk (0xFFFFFUL << ADC_PCSEL_PCSEL_Pos) /*!< 0x000FFFFF */ +#define ADC_PCSEL_PCSEL ADC_PCSEL_PCSEL_Msk /*!< ADC pre channel selection */ +#define ADC_PCSEL_PCSEL_0 (0x00001UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000001 */ +#define ADC_PCSEL_PCSEL_1 (0x00002UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000002 */ +#define ADC_PCSEL_PCSEL_2 (0x00004UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000004 */ +#define ADC_PCSEL_PCSEL_3 (0x00008UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000008 */ +#define ADC_PCSEL_PCSEL_4 (0x00010UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000010 */ +#define ADC_PCSEL_PCSEL_5 (0x00020UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000020 */ +#define ADC_PCSEL_PCSEL_6 (0x00040UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000040 */ +#define ADC_PCSEL_PCSEL_7 (0x00080UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000080 */ +#define ADC_PCSEL_PCSEL_8 (0x00100UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000100 */ +#define ADC_PCSEL_PCSEL_9 (0x00200UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000200 */ +#define ADC_PCSEL_PCSEL_10 (0x00400UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000400 */ +#define ADC_PCSEL_PCSEL_11 (0x00800UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00000800 */ +#define ADC_PCSEL_PCSEL_12 (0x01000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00001000 */ +#define ADC_PCSEL_PCSEL_13 (0x02000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00002000 */ +#define ADC_PCSEL_PCSEL_14 (0x04000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00004000 */ +#define ADC_PCSEL_PCSEL_15 (0x08000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00008000 */ +#define ADC_PCSEL_PCSEL_16 (0x10000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00010000 */ +#define ADC_PCSEL_PCSEL_17 (0x20000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00020000 */ +#define ADC_PCSEL_PCSEL_18 (0x40000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00040000 */ +#define ADC_PCSEL_PCSEL_19 (0x80000UL << ADC_PCSEL_PCSEL_Pos) /*!< 0x00080000 */ + +/***************** Bit definition for ADC_LTR1, 2, 3 registers *****************/ +#define ADC_LTR_LT_Pos (0U) +#define ADC_LTR_LT_Msk (0x3FFFFFFUL << ADC_LTR_LT_Pos) /*!< 0x03FFFFFF */ +#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC Analog watchdog 1, 2 and 3 lower threshold */ + +/***************** Bit definition for ADC_HTR1, 2, 3 registers ****************/ +#define ADC_HTR_HT_Pos (0U) +#define ADC_HTR_HT_Msk (0x3FFFFFFUL << ADC_HTR_HT_Pos) /*!< 0x03FFFFFF */ +#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC Analog watchdog 1,2 and 3 higher threshold */ + + +/******************** Bit definition for ADC_SQR1 register ********************/ +#define ADC_SQR1_L_Pos (0U) +#define ADC_SQR1_L_Msk (0xFUL << ADC_SQR1_L_Pos) /*!< 0x0000000F */ +#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC regular channel sequence length */ +#define ADC_SQR1_L_0 (0x1UL << ADC_SQR1_L_Pos) /*!< 0x00000001 */ +#define ADC_SQR1_L_1 (0x2UL << ADC_SQR1_L_Pos) /*!< 0x00000002 */ +#define ADC_SQR1_L_2 (0x4UL << ADC_SQR1_L_Pos) /*!< 0x00000004 */ +#define ADC_SQR1_L_3 (0x8UL << ADC_SQR1_L_Pos) /*!< 0x00000008 */ + +#define ADC_SQR1_SQ1_Pos (6U) +#define ADC_SQR1_SQ1_Msk (0x1FUL << ADC_SQR1_SQ1_Pos) /*!< 0x000007C0 */ +#define ADC_SQR1_SQ1 ADC_SQR1_SQ1_Msk /*!< ADC 1st conversion in regular sequence */ +#define ADC_SQR1_SQ1_0 (0x01UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000040 */ +#define ADC_SQR1_SQ1_1 (0x02UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000080 */ +#define ADC_SQR1_SQ1_2 (0x04UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000100 */ +#define ADC_SQR1_SQ1_3 (0x08UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000200 */ +#define ADC_SQR1_SQ1_4 (0x10UL << ADC_SQR1_SQ1_Pos) /*!< 0x00000400 */ + +#define ADC_SQR1_SQ2_Pos (12U) +#define ADC_SQR1_SQ2_Msk (0x1FUL << ADC_SQR1_SQ2_Pos) /*!< 0x0001F000 */ +#define ADC_SQR1_SQ2 ADC_SQR1_SQ2_Msk /*!< ADC 2nd conversion in regular sequence */ +#define ADC_SQR1_SQ2_0 (0x01UL << ADC_SQR1_SQ2_Pos) /*!< 0x00001000 */ +#define ADC_SQR1_SQ2_1 (0x02UL << ADC_SQR1_SQ2_Pos) /*!< 0x00002000 */ +#define ADC_SQR1_SQ2_2 (0x04UL << ADC_SQR1_SQ2_Pos) /*!< 0x00004000 */ +#define ADC_SQR1_SQ2_3 (0x08UL << ADC_SQR1_SQ2_Pos) /*!< 0x00008000 */ +#define ADC_SQR1_SQ2_4 (0x10UL << ADC_SQR1_SQ2_Pos) /*!< 0x00010000 */ + +#define ADC_SQR1_SQ3_Pos (18U) +#define ADC_SQR1_SQ3_Msk (0x1FUL << ADC_SQR1_SQ3_Pos) /*!< 0x007C0000 */ +#define ADC_SQR1_SQ3 ADC_SQR1_SQ3_Msk /*!< ADC 3rd conversion in regular sequence */ +#define ADC_SQR1_SQ3_0 (0x01UL << ADC_SQR1_SQ3_Pos) /*!< 0x00040000 */ +#define ADC_SQR1_SQ3_1 (0x02UL << ADC_SQR1_SQ3_Pos) /*!< 0x00080000 */ +#define ADC_SQR1_SQ3_2 (0x04UL << ADC_SQR1_SQ3_Pos) /*!< 0x00100000 */ +#define ADC_SQR1_SQ3_3 (0x08UL << ADC_SQR1_SQ3_Pos) /*!< 0x00200000 */ +#define ADC_SQR1_SQ3_4 (0x10UL << ADC_SQR1_SQ3_Pos) /*!< 0x00400000 */ + +#define ADC_SQR1_SQ4_Pos (24U) +#define ADC_SQR1_SQ4_Msk (0x1FUL << ADC_SQR1_SQ4_Pos) /*!< 0x1F000000 */ +#define ADC_SQR1_SQ4 ADC_SQR1_SQ4_Msk /*!< ADC 4th conversion in regular sequence */ +#define ADC_SQR1_SQ4_0 (0x01UL << ADC_SQR1_SQ4_Pos) /*!< 0x01000000 */ +#define ADC_SQR1_SQ4_1 (0x02UL << ADC_SQR1_SQ4_Pos) /*!< 0x02000000 */ +#define ADC_SQR1_SQ4_2 (0x04UL << ADC_SQR1_SQ4_Pos) /*!< 0x04000000 */ +#define ADC_SQR1_SQ4_3 (0x08UL << ADC_SQR1_SQ4_Pos) /*!< 0x08000000 */ +#define ADC_SQR1_SQ4_4 (0x10UL << ADC_SQR1_SQ4_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR2 register ********************/ +#define ADC_SQR2_SQ5_Pos (0U) +#define ADC_SQR2_SQ5_Msk (0x1FUL << ADC_SQR2_SQ5_Pos) /*!< 0x0000001F */ +#define ADC_SQR2_SQ5 ADC_SQR2_SQ5_Msk /*!< ADC 5th conversion in regular sequence */ +#define ADC_SQR2_SQ5_0 (0x01UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000001 */ +#define ADC_SQR2_SQ5_1 (0x02UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000002 */ +#define ADC_SQR2_SQ5_2 (0x04UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000004 */ +#define ADC_SQR2_SQ5_3 (0x08UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000008 */ +#define ADC_SQR2_SQ5_4 (0x10UL << ADC_SQR2_SQ5_Pos) /*!< 0x00000010 */ + +#define ADC_SQR2_SQ6_Pos (6U) +#define ADC_SQR2_SQ6_Msk (0x1FUL << ADC_SQR2_SQ6_Pos) /*!< 0x000007C0 */ +#define ADC_SQR2_SQ6 ADC_SQR2_SQ6_Msk /*!< ADC 6th conversion in regular sequence */ +#define ADC_SQR2_SQ6_0 (0x01UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000040 */ +#define ADC_SQR2_SQ6_1 (0x02UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000080 */ +#define ADC_SQR2_SQ6_2 (0x04UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000100 */ +#define ADC_SQR2_SQ6_3 (0x08UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000200 */ +#define ADC_SQR2_SQ6_4 (0x10UL << ADC_SQR2_SQ6_Pos) /*!< 0x00000400 */ + +#define ADC_SQR2_SQ7_Pos (12U) +#define ADC_SQR2_SQ7_Msk (0x1FUL << ADC_SQR2_SQ7_Pos) /*!< 0x0001F000 */ +#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC 7th conversion in regular sequence */ +#define ADC_SQR2_SQ7_0 (0x01UL << ADC_SQR2_SQ7_Pos) /*!< 0x00001000 */ +#define ADC_SQR2_SQ7_1 (0x02UL << ADC_SQR2_SQ7_Pos) /*!< 0x00002000 */ +#define ADC_SQR2_SQ7_2 (0x04UL << ADC_SQR2_SQ7_Pos) /*!< 0x00004000 */ +#define ADC_SQR2_SQ7_3 (0x08UL << ADC_SQR2_SQ7_Pos) /*!< 0x00008000 */ +#define ADC_SQR2_SQ7_4 (0x10UL << ADC_SQR2_SQ7_Pos) /*!< 0x00010000 */ + +#define ADC_SQR2_SQ8_Pos (18U) +#define ADC_SQR2_SQ8_Msk (0x1FUL << ADC_SQR2_SQ8_Pos) /*!< 0x007C0000 */ +#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC 8th conversion in regular sequence */ +#define ADC_SQR2_SQ8_0 (0x01UL << ADC_SQR2_SQ8_Pos) /*!< 0x00040000 */ +#define ADC_SQR2_SQ8_1 (0x02UL << ADC_SQR2_SQ8_Pos) /*!< 0x00080000 */ +#define ADC_SQR2_SQ8_2 (0x04UL << ADC_SQR2_SQ8_Pos) /*!< 0x00100000 */ +#define ADC_SQR2_SQ8_3 (0x08UL << ADC_SQR2_SQ8_Pos) /*!< 0x00200000 */ +#define ADC_SQR2_SQ8_4 (0x10UL << ADC_SQR2_SQ8_Pos) /*!< 0x00400000 */ + +#define ADC_SQR2_SQ9_Pos (24U) +#define ADC_SQR2_SQ9_Msk (0x1FUL << ADC_SQR2_SQ9_Pos) /*!< 0x1F000000 */ +#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC 9th conversion in regular sequence */ +#define ADC_SQR2_SQ9_0 (0x01UL << ADC_SQR2_SQ9_Pos) /*!< 0x01000000 */ +#define ADC_SQR2_SQ9_1 (0x02UL << ADC_SQR2_SQ9_Pos) /*!< 0x02000000 */ +#define ADC_SQR2_SQ9_2 (0x04UL << ADC_SQR2_SQ9_Pos) /*!< 0x04000000 */ +#define ADC_SQR2_SQ9_3 (0x08UL << ADC_SQR2_SQ9_Pos) /*!< 0x08000000 */ +#define ADC_SQR2_SQ9_4 (0x10UL << ADC_SQR2_SQ9_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR3 register ********************/ +#define ADC_SQR3_SQ10_Pos (0U) +#define ADC_SQR3_SQ10_Msk (0x1FUL << ADC_SQR3_SQ10_Pos) /*!< 0x0000001F */ +#define ADC_SQR3_SQ10 ADC_SQR3_SQ10_Msk /*!< ADC 10th conversion in regular sequence */ +#define ADC_SQR3_SQ10_0 (0x01UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000001 */ +#define ADC_SQR3_SQ10_1 (0x02UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000002 */ +#define ADC_SQR3_SQ10_2 (0x04UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000004 */ +#define ADC_SQR3_SQ10_3 (0x08UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000008 */ +#define ADC_SQR3_SQ10_4 (0x10UL << ADC_SQR3_SQ10_Pos) /*!< 0x00000010 */ + +#define ADC_SQR3_SQ11_Pos (6U) +#define ADC_SQR3_SQ11_Msk (0x1FUL << ADC_SQR3_SQ11_Pos) /*!< 0x000007C0 */ +#define ADC_SQR3_SQ11 ADC_SQR3_SQ11_Msk /*!< ADC 11th conversion in regular sequence */ +#define ADC_SQR3_SQ11_0 (0x01UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000040 */ +#define ADC_SQR3_SQ11_1 (0x02UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000080 */ +#define ADC_SQR3_SQ11_2 (0x04UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000100 */ +#define ADC_SQR3_SQ11_3 (0x08UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000200 */ +#define ADC_SQR3_SQ11_4 (0x10UL << ADC_SQR3_SQ11_Pos) /*!< 0x00000400 */ + +#define ADC_SQR3_SQ12_Pos (12U) +#define ADC_SQR3_SQ12_Msk (0x1FUL << ADC_SQR3_SQ12_Pos) /*!< 0x0001F000 */ +#define ADC_SQR3_SQ12 ADC_SQR3_SQ12_Msk /*!< ADC 12th conversion in regular sequence */ +#define ADC_SQR3_SQ12_0 (0x01UL << ADC_SQR3_SQ12_Pos) /*!< 0x00001000 */ +#define ADC_SQR3_SQ12_1 (0x02UL << ADC_SQR3_SQ12_Pos) /*!< 0x00002000 */ +#define ADC_SQR3_SQ12_2 (0x04UL << ADC_SQR3_SQ12_Pos) /*!< 0x00004000 */ +#define ADC_SQR3_SQ12_3 (0x08UL << ADC_SQR3_SQ12_Pos) /*!< 0x00008000 */ +#define ADC_SQR3_SQ12_4 (0x10UL << ADC_SQR3_SQ12_Pos) /*!< 0x00010000 */ + +#define ADC_SQR3_SQ13_Pos (18U) +#define ADC_SQR3_SQ13_Msk (0x1FUL << ADC_SQR3_SQ13_Pos) /*!< 0x007C0000 */ +#define ADC_SQR3_SQ13 ADC_SQR3_SQ13_Msk /*!< ADC 13th conversion in regular sequence */ +#define ADC_SQR3_SQ13_0 (0x01UL << ADC_SQR3_SQ13_Pos) /*!< 0x00040000 */ +#define ADC_SQR3_SQ13_1 (0x02UL << ADC_SQR3_SQ13_Pos) /*!< 0x00080000 */ +#define ADC_SQR3_SQ13_2 (0x04UL << ADC_SQR3_SQ13_Pos) /*!< 0x00100000 */ +#define ADC_SQR3_SQ13_3 (0x08UL << ADC_SQR3_SQ13_Pos) /*!< 0x00200000 */ +#define ADC_SQR3_SQ13_4 (0x10UL << ADC_SQR3_SQ13_Pos) /*!< 0x00400000 */ + +#define ADC_SQR3_SQ14_Pos (24U) +#define ADC_SQR3_SQ14_Msk (0x1FUL << ADC_SQR3_SQ14_Pos) /*!< 0x1F000000 */ +#define ADC_SQR3_SQ14 ADC_SQR3_SQ14_Msk /*!< ADC 14th conversion in regular sequence */ +#define ADC_SQR3_SQ14_0 (0x01UL << ADC_SQR3_SQ14_Pos) /*!< 0x01000000 */ +#define ADC_SQR3_SQ14_1 (0x02UL << ADC_SQR3_SQ14_Pos) /*!< 0x02000000 */ +#define ADC_SQR3_SQ14_2 (0x04UL << ADC_SQR3_SQ14_Pos) /*!< 0x04000000 */ +#define ADC_SQR3_SQ14_3 (0x08UL << ADC_SQR3_SQ14_Pos) /*!< 0x08000000 */ +#define ADC_SQR3_SQ14_4 (0x10UL << ADC_SQR3_SQ14_Pos) /*!< 0x10000000 */ + +/******************** Bit definition for ADC_SQR4 register ********************/ +#define ADC_SQR4_SQ15_Pos (0U) +#define ADC_SQR4_SQ15_Msk (0x1FUL << ADC_SQR4_SQ15_Pos) /*!< 0x0000001F */ +#define ADC_SQR4_SQ15 ADC_SQR4_SQ15_Msk /*!< ADC 15th conversion in regular sequence */ +#define ADC_SQR4_SQ15_0 (0x01UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000001 */ +#define ADC_SQR4_SQ15_1 (0x02UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000002 */ +#define ADC_SQR4_SQ15_2 (0x04UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000004 */ +#define ADC_SQR4_SQ15_3 (0x08UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000008 */ +#define ADC_SQR4_SQ15_4 (0x10UL << ADC_SQR4_SQ15_Pos) /*!< 0x00000010 */ + +#define ADC_SQR4_SQ16_Pos (6U) +#define ADC_SQR4_SQ16_Msk (0x1FUL << ADC_SQR4_SQ16_Pos) /*!< 0x000007C0 */ +#define ADC_SQR4_SQ16 ADC_SQR4_SQ16_Msk /*!< ADC 16th conversion in regular sequence */ +#define ADC_SQR4_SQ16_0 (0x01UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000040 */ +#define ADC_SQR4_SQ16_1 (0x02UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000080 */ +#define ADC_SQR4_SQ16_2 (0x04UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000100 */ +#define ADC_SQR4_SQ16_3 (0x08UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000200 */ +#define ADC_SQR4_SQ16_4 (0x10UL << ADC_SQR4_SQ16_Pos) /*!< 0x00000400 */ +/******************** Bit definition for ADC_DR register ********************/ +#define ADC_DR_RDATA_Pos (0U) +#define ADC_DR_RDATA_Msk (0xFFFFFFFFUL << ADC_DR_RDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_DR_RDATA ADC_DR_RDATA_Msk /*!< ADC regular Data converted */ + +/******************** Bit definition for ADC_JSQR register ********************/ +#define ADC_JSQR_JL_Pos (0U) +#define ADC_JSQR_JL_Msk (0x3UL << ADC_JSQR_JL_Pos) /*!< 0x00000003 */ +#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC injected channel sequence length */ +#define ADC_JSQR_JL_0 (0x1UL << ADC_JSQR_JL_Pos) /*!< 0x00000001 */ +#define ADC_JSQR_JL_1 (0x2UL << ADC_JSQR_JL_Pos) /*!< 0x00000002 */ + +#define ADC_JSQR_JEXTSEL_Pos (2U) +#define ADC_JSQR_JEXTSEL_Msk (0x1FUL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x0000007C */ +#define ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_Msk /*!< ADC external trigger selection for injected group */ +#define ADC_JSQR_JEXTSEL_0 (0x01UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000004 */ +#define ADC_JSQR_JEXTSEL_1 (0x02UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000008 */ +#define ADC_JSQR_JEXTSEL_2 (0x04UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000010 */ +#define ADC_JSQR_JEXTSEL_3 (0x08UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000020 */ +#define ADC_JSQR_JEXTSEL_4 (0x10UL << ADC_JSQR_JEXTSEL_Pos) /*!< 0x00000040 */ + +#define ADC_JSQR_JEXTEN_Pos (7U) +#define ADC_JSQR_JEXTEN_Msk (0x3UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000180 */ +#define ADC_JSQR_JEXTEN ADC_JSQR_JEXTEN_Msk /*!< ADC external trigger enable and polarity selection for injected channels */ +#define ADC_JSQR_JEXTEN_0 (0x1UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000080 */ +#define ADC_JSQR_JEXTEN_1 (0x2UL << ADC_JSQR_JEXTEN_Pos) /*!< 0x00000100 */ + +#define ADC_JSQR_JSQ1_Pos (9U) +#define ADC_JSQR_JSQ1_Msk (0x1FUL << ADC_JSQR_JSQ1_Pos) /*!< 0x00003E00 */ +#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC 1st conversion in injected sequence */ +#define ADC_JSQR_JSQ1_0 (0x01UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000200 */ +#define ADC_JSQR_JSQ1_1 (0x02UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000400 */ +#define ADC_JSQR_JSQ1_2 (0x04UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00000800 */ +#define ADC_JSQR_JSQ1_3 (0x08UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00001000 */ +#define ADC_JSQR_JSQ1_4 (0x10UL << ADC_JSQR_JSQ1_Pos) /*!< 0x00002000 */ + +#define ADC_JSQR_JSQ2_Pos (15U) +#define ADC_JSQR_JSQ2_Msk (0x1FUL << ADC_JSQR_JSQ2_Pos) /*!< 0x000F8000 */ +#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC 2nd conversion in injected sequence */ +#define ADC_JSQR_JSQ2_0 (0x01UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00008000 */ +#define ADC_JSQR_JSQ2_1 (0x02UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00010000 */ +#define ADC_JSQR_JSQ2_2 (0x04UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00020000 */ +#define ADC_JSQR_JSQ2_3 (0x08UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00040000 */ +#define ADC_JSQR_JSQ2_4 (0x10UL << ADC_JSQR_JSQ2_Pos) /*!< 0x00080000 */ + +#define ADC_JSQR_JSQ3_Pos (21U) +#define ADC_JSQR_JSQ3_Msk (0x1FUL << ADC_JSQR_JSQ3_Pos) /*!< 0x03E00000 */ +#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC 3rd conversion in injected sequence */ +#define ADC_JSQR_JSQ3_0 (0x01UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00200000 */ +#define ADC_JSQR_JSQ3_1 (0x02UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00400000 */ +#define ADC_JSQR_JSQ3_2 (0x04UL << ADC_JSQR_JSQ3_Pos) /*!< 0x00800000 */ +#define ADC_JSQR_JSQ3_3 (0x08UL << ADC_JSQR_JSQ3_Pos) /*!< 0x01000000 */ +#define ADC_JSQR_JSQ3_4 (0x10UL << ADC_JSQR_JSQ3_Pos) /*!< 0x02000000 */ + +#define ADC_JSQR_JSQ4_Pos (27U) +#define ADC_JSQR_JSQ4_Msk (0x1FUL << ADC_JSQR_JSQ4_Pos) /*!< 0xF8000000 */ +#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC 4th conversion in injected sequence */ +#define ADC_JSQR_JSQ4_0 (0x01UL << ADC_JSQR_JSQ4_Pos) /*!< 0x08000000 */ +#define ADC_JSQR_JSQ4_1 (0x02UL << ADC_JSQR_JSQ4_Pos) /*!< 0x10000000 */ +#define ADC_JSQR_JSQ4_2 (0x04UL << ADC_JSQR_JSQ4_Pos) /*!< 0x20000000 */ +#define ADC_JSQR_JSQ4_3 (0x08UL << ADC_JSQR_JSQ4_Pos) /*!< 0x40000000 */ +#define ADC_JSQR_JSQ4_4 (0x10UL << ADC_JSQR_JSQ4_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_OFR1 register ********************/ +#define ADC_OFR1_OFFSET1_Pos (0U) +#define ADC_OFR1_OFFSET1_Msk (0x3FFFFFFUL << ADC_OFR1_OFFSET1_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR1_OFFSET1 ADC_OFR1_OFFSET1_Msk /*!< ADC data offset 1 for channel programmed into bits OFFSET1_CH[4:0] */ +#define ADC_OFR1_OFFSET1_0 (0x0000001UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000001 */ +#define ADC_OFR1_OFFSET1_1 (0x0000002UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000002 */ +#define ADC_OFR1_OFFSET1_2 (0x0000004UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000004 */ +#define ADC_OFR1_OFFSET1_3 (0x0000008UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000008 */ +#define ADC_OFR1_OFFSET1_4 (0x0000010UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000010 */ +#define ADC_OFR1_OFFSET1_5 (0x0000020UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000020 */ +#define ADC_OFR1_OFFSET1_6 (0x0000040UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000040 */ +#define ADC_OFR1_OFFSET1_7 (0x0000080UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000080 */ +#define ADC_OFR1_OFFSET1_8 (0x0000100UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000100 */ +#define ADC_OFR1_OFFSET1_9 (0x0000200UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000200 */ +#define ADC_OFR1_OFFSET1_10 (0x0000400UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000400 */ +#define ADC_OFR1_OFFSET1_11 (0x0000800UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00000800 */ +#define ADC_OFR1_OFFSET1_12 (0x0001000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00001000 */ +#define ADC_OFR1_OFFSET1_13 (0x0002000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00002000 */ +#define ADC_OFR1_OFFSET1_14 (0x0004000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00004000 */ +#define ADC_OFR1_OFFSET1_15 (0x0008000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00008000 */ +#define ADC_OFR1_OFFSET1_16 (0x0010000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00010000 */ +#define ADC_OFR1_OFFSET1_17 (0x0020000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00020000 */ +#define ADC_OFR1_OFFSET1_18 (0x0040000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00040000 */ +#define ADC_OFR1_OFFSET1_19 (0x0080000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00080000 */ +#define ADC_OFR1_OFFSET1_20 (0x0100000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00100000 */ +#define ADC_OFR1_OFFSET1_21 (0x0200000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00200000 */ +#define ADC_OFR1_OFFSET1_22 (0x0400000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00400000 */ +#define ADC_OFR1_OFFSET1_23 (0x0800000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x00800000 */ +#define ADC_OFR1_OFFSET1_24 (0x1000000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x01000000 */ +#define ADC_OFR1_OFFSET1_25 (0x2000000UL << ADC_OFR1_OFFSET1_Pos) /*!< 0x02000000 */ + +#define ADC_OFR1_OFFSET1_CH_Pos (26U) +#define ADC_OFR1_OFFSET1_CH_Msk (0x1FUL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR1_OFFSET1_CH ADC_OFR1_OFFSET1_CH_Msk /*!< ADC Channel selection for the data offset 1 */ +#define ADC_OFR1_OFFSET1_CH_0 (0x01UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR1_OFFSET1_CH_1 (0x02UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR1_OFFSET1_CH_2 (0x04UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR1_OFFSET1_CH_3 (0x08UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR1_OFFSET1_CH_4 (0x10UL << ADC_OFR1_OFFSET1_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR1_SSATE_Pos (31U) +#define ADC_OFR1_SSATE_Msk (0x1UL << ADC_OFR1_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR1_SSATE ADC_OFR1_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_OFR2 register ********************/ +#define ADC_OFR2_OFFSET2_Pos (0U) +#define ADC_OFR2_OFFSET2_Msk (0x3FFFFFFUL << ADC_OFR2_OFFSET2_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR2_OFFSET2 ADC_OFR2_OFFSET2_Msk /*!< ADC data offset 2 for channel programmed into bits OFFSET2_CH[4:0] */ +#define ADC_OFR2_OFFSET2_0 (0x0000001UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000001 */ +#define ADC_OFR2_OFFSET2_1 (0x0000002UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000002 */ +#define ADC_OFR2_OFFSET2_2 (0x0000004UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000004 */ +#define ADC_OFR2_OFFSET2_3 (0x0000008UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000008 */ +#define ADC_OFR2_OFFSET2_4 (0x0000010UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000010 */ +#define ADC_OFR2_OFFSET2_5 (0x0000020UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000020 */ +#define ADC_OFR2_OFFSET2_6 (0x0000040UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000040 */ +#define ADC_OFR2_OFFSET2_7 (0x0000080UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000080 */ +#define ADC_OFR2_OFFSET2_8 (0x0000100UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000100 */ +#define ADC_OFR2_OFFSET2_9 (0x0000200UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000200 */ +#define ADC_OFR2_OFFSET2_10 (0x0000400UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000400 */ +#define ADC_OFR2_OFFSET2_11 (0x0000800UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00000800 */ +#define ADC_OFR2_OFFSET2_12 (0x0001000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00001000 */ +#define ADC_OFR2_OFFSET2_13 (0x0002000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00002000 */ +#define ADC_OFR2_OFFSET2_14 (0x0004000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00004000 */ +#define ADC_OFR2_OFFSET2_15 (0x0008000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00008000 */ +#define ADC_OFR2_OFFSET2_16 (0x0010000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00010000 */ +#define ADC_OFR2_OFFSET2_17 (0x0020000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00020000 */ +#define ADC_OFR2_OFFSET2_18 (0x0040000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00040000 */ +#define ADC_OFR2_OFFSET2_19 (0x0080000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00080000 */ +#define ADC_OFR2_OFFSET2_20 (0x0100000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00100000 */ +#define ADC_OFR2_OFFSET2_21 (0x0200000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00200000 */ +#define ADC_OFR2_OFFSET2_22 (0x0400000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00400000 */ +#define ADC_OFR2_OFFSET2_23 (0x0800000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x00800000 */ +#define ADC_OFR2_OFFSET2_24 (0x1000000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x01000000 */ +#define ADC_OFR2_OFFSET2_25 (0x2000000UL << ADC_OFR2_OFFSET2_Pos) /*!< 0x02000000 */ + +#define ADC_OFR2_OFFSET2_CH_Pos (26U) +#define ADC_OFR2_OFFSET2_CH_Msk (0x1FUL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR2_OFFSET2_CH ADC_OFR2_OFFSET2_CH_Msk /*!< ADC Channel selection for the data offset 2 */ +#define ADC_OFR2_OFFSET2_CH_0 (0x01UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR2_OFFSET2_CH_1 (0x02UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR2_OFFSET2_CH_2 (0x04UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR2_OFFSET2_CH_3 (0x08UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR2_OFFSET2_CH_4 (0x10UL << ADC_OFR2_OFFSET2_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR2_SSATE_Pos (31U) +#define ADC_OFR2_SSATE_Msk (0x1UL << ADC_OFR2_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR2_SSATE ADC_OFR2_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_OFR3 register ********************/ +#define ADC_OFR3_OFFSET3_Pos (0U) +#define ADC_OFR3_OFFSET3_Msk (0x3FFFFFFUL << ADC_OFR3_OFFSET3_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR3_OFFSET3 ADC_OFR3_OFFSET3_Msk /*!< ADC data offset 3 for channel programmed into bits OFFSET3_CH[4:0] */ +#define ADC_OFR3_OFFSET3_0 (0x0000001UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000001 */ +#define ADC_OFR3_OFFSET3_1 (0x0000002UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000002 */ +#define ADC_OFR3_OFFSET3_2 (0x0000004UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000004 */ +#define ADC_OFR3_OFFSET3_3 (0x0000008UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000008 */ +#define ADC_OFR3_OFFSET3_4 (0x0000010UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000010 */ +#define ADC_OFR3_OFFSET3_5 (0x0000020UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000020 */ +#define ADC_OFR3_OFFSET3_6 (0x0000040UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000040 */ +#define ADC_OFR3_OFFSET3_7 (0x0000080UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000080 */ +#define ADC_OFR3_OFFSET3_8 (0x0000100UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000100 */ +#define ADC_OFR3_OFFSET3_9 (0x0000200UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000200 */ +#define ADC_OFR3_OFFSET3_10 (0x0000400UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000400 */ +#define ADC_OFR3_OFFSET3_11 (0x0000800UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00000800 */ +#define ADC_OFR3_OFFSET3_12 (0x0001000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00001000 */ +#define ADC_OFR3_OFFSET3_13 (0x0002000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00002000 */ +#define ADC_OFR3_OFFSET3_14 (0x0004000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00004000 */ +#define ADC_OFR3_OFFSET3_15 (0x0008000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00008000 */ +#define ADC_OFR3_OFFSET3_16 (0x0010000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00010000 */ +#define ADC_OFR3_OFFSET3_17 (0x0020000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00020000 */ +#define ADC_OFR3_OFFSET3_18 (0x0040000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00040000 */ +#define ADC_OFR3_OFFSET3_19 (0x0080000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00080000 */ +#define ADC_OFR3_OFFSET3_20 (0x0100000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00100000 */ +#define ADC_OFR3_OFFSET3_21 (0x0200000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00200000 */ +#define ADC_OFR3_OFFSET3_22 (0x0400000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00400000 */ +#define ADC_OFR3_OFFSET3_23 (0x0800000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x00800000 */ +#define ADC_OFR3_OFFSET3_24 (0x1000000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x01000000 */ +#define ADC_OFR3_OFFSET3_25 (0x2000000UL << ADC_OFR3_OFFSET3_Pos) /*!< 0x02000000 */ + +#define ADC_OFR3_OFFSET3_CH_Pos (26U) +#define ADC_OFR3_OFFSET3_CH_Msk (0x1FUL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR3_OFFSET3_CH ADC_OFR3_OFFSET3_CH_Msk /*!< ADC Channel selection for the data offset 3 */ +#define ADC_OFR3_OFFSET3_CH_0 (0x01UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR3_OFFSET3_CH_1 (0x02UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR3_OFFSET3_CH_2 (0x04UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR3_OFFSET3_CH_3 (0x08UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR3_OFFSET3_CH_4 (0x10UL << ADC_OFR3_OFFSET3_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR3_SSATE_Pos (31U) +#define ADC_OFR3_SSATE_Msk (0x1UL << ADC_OFR3_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR3_SSATE ADC_OFR3_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_OFR4 register ********************/ +#define ADC_OFR4_OFFSET4_Pos (0U) +#define ADC_OFR4_OFFSET4_Msk (0x3FFFFFFUL << ADC_OFR4_OFFSET4_Pos) /*!< 0x03FFFFFF */ +#define ADC_OFR4_OFFSET4 ADC_OFR4_OFFSET4_Msk /*!< ADC data offset 4 for channel programmed into bits OFFSET4_CH[4:0] */ +#define ADC_OFR4_OFFSET4_0 (0x0000001UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000001 */ +#define ADC_OFR4_OFFSET4_1 (0x0000002UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000002 */ +#define ADC_OFR4_OFFSET4_2 (0x0000004UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000004 */ +#define ADC_OFR4_OFFSET4_3 (0x0000008UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000008 */ +#define ADC_OFR4_OFFSET4_4 (0x0000010UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000010 */ +#define ADC_OFR4_OFFSET4_5 (0x0000020UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000020 */ +#define ADC_OFR4_OFFSET4_6 (0x0000040UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000040 */ +#define ADC_OFR4_OFFSET4_7 (0x0000080UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000080 */ +#define ADC_OFR4_OFFSET4_8 (0x0000100UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000100 */ +#define ADC_OFR4_OFFSET4_9 (0x0000200UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000200 */ +#define ADC_OFR4_OFFSET4_10 (0x0000400UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000400 */ +#define ADC_OFR4_OFFSET4_11 (0x0000800UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00000800 */ +#define ADC_OFR4_OFFSET4_12 (0x0001000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00001000 */ +#define ADC_OFR4_OFFSET4_13 (0x0002000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00002000 */ +#define ADC_OFR4_OFFSET4_14 (0x0004000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00004000 */ +#define ADC_OFR4_OFFSET4_15 (0x0008000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00008000 */ +#define ADC_OFR4_OFFSET4_16 (0x0010000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00010000 */ +#define ADC_OFR4_OFFSET4_17 (0x0020000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00020000 */ +#define ADC_OFR4_OFFSET4_18 (0x0040000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00040000 */ +#define ADC_OFR4_OFFSET4_19 (0x0080000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00080000 */ +#define ADC_OFR4_OFFSET4_20 (0x0100000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00100000 */ +#define ADC_OFR4_OFFSET4_21 (0x0200000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00200000 */ +#define ADC_OFR4_OFFSET4_22 (0x0400000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00400000 */ +#define ADC_OFR4_OFFSET4_23 (0x0800000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x00800000 */ +#define ADC_OFR4_OFFSET4_24 (0x1000000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x01000000 */ +#define ADC_OFR4_OFFSET4_25 (0x2000000UL << ADC_OFR4_OFFSET4_Pos) /*!< 0x02000000 */ + +#define ADC_OFR4_OFFSET4_CH_Pos (26U) +#define ADC_OFR4_OFFSET4_CH_Msk (0x1FUL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x7C000000 */ +#define ADC_OFR4_OFFSET4_CH ADC_OFR4_OFFSET4_CH_Msk /*!< ADC Channel selection for the data offset 4 */ +#define ADC_OFR4_OFFSET4_CH_0 (0x01UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x04000000 */ +#define ADC_OFR4_OFFSET4_CH_1 (0x02UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x08000000 */ +#define ADC_OFR4_OFFSET4_CH_2 (0x04UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x10000000 */ +#define ADC_OFR4_OFFSET4_CH_3 (0x08UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x20000000 */ +#define ADC_OFR4_OFFSET4_CH_4 (0x10UL << ADC_OFR4_OFFSET4_CH_Pos) /*!< 0x40000000 */ + +#define ADC_OFR4_SSATE_Pos (31U) +#define ADC_OFR4_SSATE_Msk (0x1UL << ADC_OFR4_SSATE_Pos) /*!< 0x80000000 */ +#define ADC_OFR4_SSATE ADC_OFR4_SSATE_Msk /*!< ADC Signed saturation Enable */ + + +/******************** Bit definition for ADC_JDR1 register ********************/ +#define ADC_JDR1_JDATA_Pos (0U) +#define ADC_JDR1_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR1_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR1_JDATA_0 (0x00000001UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR1_JDATA_1 (0x00000002UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR1_JDATA_2 (0x00000004UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR1_JDATA_3 (0x00000008UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR1_JDATA_4 (0x00000010UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR1_JDATA_5 (0x00000020UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR1_JDATA_6 (0x00000040UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR1_JDATA_7 (0x00000080UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR1_JDATA_8 (0x00000100UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR1_JDATA_9 (0x00000200UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR1_JDATA_10 (0x00000400UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR1_JDATA_11 (0x00000800UL << ADC_JDR1_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR1_JDATA_12 (0x00001000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR1_JDATA_13 (0x00002000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR1_JDATA_14 (0x00004000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR1_JDATA_15 (0x00008000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR1_JDATA_16 (0x00010000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR1_JDATA_17 (0x00020000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR1_JDATA_18 (0x00040000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR1_JDATA_19 (0x00080000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR1_JDATA_20 (0x00100000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR1_JDATA_21 (0x00200000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR1_JDATA_22 (0x00400000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR1_JDATA_23 (0x00800000UL << ADC_JDR1_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR1_JDATA_24 (0x01000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR1_JDATA_25 (0x02000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR1_JDATA_26 (0x04000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR1_JDATA_27 (0x08000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR1_JDATA_28 (0x10000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR1_JDATA_29 (0x20000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR1_JDATA_30 (0x40000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR1_JDATA_31 (0x80000000UL << ADC_JDR1_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_JDR2 register ********************/ +#define ADC_JDR2_JDATA_Pos (0U) +#define ADC_JDR2_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR2_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR2_JDATA_0 (0x00000001UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR2_JDATA_1 (0x00000002UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR2_JDATA_2 (0x00000004UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR2_JDATA_3 (0x00000008UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR2_JDATA_4 (0x00000010UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR2_JDATA_5 (0x00000020UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR2_JDATA_6 (0x00000040UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR2_JDATA_7 (0x00000080UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR2_JDATA_8 (0x00000100UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR2_JDATA_9 (0x00000200UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR2_JDATA_10 (0x00000400UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR2_JDATA_11 (0x00000800UL << ADC_JDR2_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR2_JDATA_12 (0x00001000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR2_JDATA_13 (0x00002000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR2_JDATA_14 (0x00004000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR2_JDATA_15 (0x00008000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR2_JDATA_16 (0x00010000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR2_JDATA_17 (0x00020000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR2_JDATA_18 (0x00040000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR2_JDATA_19 (0x00080000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR2_JDATA_20 (0x00100000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR2_JDATA_21 (0x00200000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR2_JDATA_22 (0x00400000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR2_JDATA_23 (0x00800000UL << ADC_JDR2_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR2_JDATA_24 (0x01000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR2_JDATA_25 (0x02000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR2_JDATA_26 (0x04000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR2_JDATA_27 (0x08000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR2_JDATA_28 (0x10000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR2_JDATA_29 (0x20000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR2_JDATA_30 (0x40000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR2_JDATA_31 (0x80000000UL << ADC_JDR2_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_JDR3 register ********************/ +#define ADC_JDR3_JDATA_Pos (0U) +#define ADC_JDR3_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR3_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR3_JDATA_0 (0x00000001UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR3_JDATA_1 (0x00000002UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR3_JDATA_2 (0x00000004UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR3_JDATA_3 (0x00000008UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR3_JDATA_4 (0x00000010UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR3_JDATA_5 (0x00000020UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR3_JDATA_6 (0x00000040UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR3_JDATA_7 (0x00000080UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR3_JDATA_8 (0x00000100UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR3_JDATA_9 (0x00000200UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR3_JDATA_10 (0x00000400UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR3_JDATA_11 (0x00000800UL << ADC_JDR3_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR3_JDATA_12 (0x00001000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR3_JDATA_13 (0x00002000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR3_JDATA_14 (0x00004000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR3_JDATA_15 (0x00008000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR3_JDATA_16 (0x00010000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR3_JDATA_17 (0x00020000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR3_JDATA_18 (0x00040000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR3_JDATA_19 (0x00080000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR3_JDATA_20 (0x00100000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR3_JDATA_21 (0x00200000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR3_JDATA_22 (0x00400000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR3_JDATA_23 (0x00800000UL << ADC_JDR3_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR3_JDATA_24 (0x01000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR3_JDATA_25 (0x02000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR3_JDATA_26 (0x04000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR3_JDATA_27 (0x08000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR3_JDATA_28 (0x10000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR3_JDATA_29 (0x20000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR3_JDATA_30 (0x40000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR3_JDATA_31 (0x80000000UL << ADC_JDR3_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_JDR4 register ********************/ +#define ADC_JDR4_JDATA_Pos (0U) +#define ADC_JDR4_JDATA_Msk (0xFFFFFFFFUL << ADC_JDR4_JDATA_Pos) /*!< 0xFFFFFFFF */ +#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC Injected DATA */ +#define ADC_JDR4_JDATA_0 (0x00000001UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000001 */ +#define ADC_JDR4_JDATA_1 (0x00000002UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000002 */ +#define ADC_JDR4_JDATA_2 (0x00000004UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000004 */ +#define ADC_JDR4_JDATA_3 (0x00000008UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000008 */ +#define ADC_JDR4_JDATA_4 (0x00000010UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000010 */ +#define ADC_JDR4_JDATA_5 (0x00000020UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000020 */ +#define ADC_JDR4_JDATA_6 (0x00000040UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000040 */ +#define ADC_JDR4_JDATA_7 (0x00000080UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000080 */ +#define ADC_JDR4_JDATA_8 (0x00000100UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000100 */ +#define ADC_JDR4_JDATA_9 (0x00000200UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000200 */ +#define ADC_JDR4_JDATA_10 (0x00000400UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000400 */ +#define ADC_JDR4_JDATA_11 (0x00000800UL << ADC_JDR4_JDATA_Pos) /*!< 0x00000800 */ +#define ADC_JDR4_JDATA_12 (0x00001000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00001000 */ +#define ADC_JDR4_JDATA_13 (0x00002000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00002000 */ +#define ADC_JDR4_JDATA_14 (0x00004000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00004000 */ +#define ADC_JDR4_JDATA_15 (0x00008000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00008000 */ +#define ADC_JDR4_JDATA_16 (0x00010000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00010000 */ +#define ADC_JDR4_JDATA_17 (0x00020000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00020000 */ +#define ADC_JDR4_JDATA_18 (0x00040000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00040000 */ +#define ADC_JDR4_JDATA_19 (0x00080000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00080000 */ +#define ADC_JDR4_JDATA_20 (0x00100000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00100000 */ +#define ADC_JDR4_JDATA_21 (0x00200000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00200000 */ +#define ADC_JDR4_JDATA_22 (0x00400000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00400000 */ +#define ADC_JDR4_JDATA_23 (0x00800000UL << ADC_JDR4_JDATA_Pos) /*!< 0x00800000 */ +#define ADC_JDR4_JDATA_24 (0x01000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x01000000 */ +#define ADC_JDR4_JDATA_25 (0x02000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x02000000 */ +#define ADC_JDR4_JDATA_26 (0x04000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x04000000 */ +#define ADC_JDR4_JDATA_27 (0x08000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x08000000 */ +#define ADC_JDR4_JDATA_28 (0x10000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x10000000 */ +#define ADC_JDR4_JDATA_29 (0x20000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x20000000 */ +#define ADC_JDR4_JDATA_30 (0x40000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x40000000 */ +#define ADC_JDR4_JDATA_31 (0x80000000UL << ADC_JDR4_JDATA_Pos) /*!< 0x80000000 */ + +/******************** Bit definition for ADC_AWD2CR register ********************/ +#define ADC_AWD2CR_AWD2CH_Pos (0U) +#define ADC_AWD2CR_AWD2CH_Msk (0xFFFFFUL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x000FFFFF */ +#define ADC_AWD2CR_AWD2CH ADC_AWD2CR_AWD2CH_Msk /*!< ADC Analog watchdog 2 channel selection */ +#define ADC_AWD2CR_AWD2CH_0 (0x00001UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD2CR_AWD2CH_1 (0x00002UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD2CR_AWD2CH_2 (0x00004UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD2CR_AWD2CH_3 (0x00008UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD2CR_AWD2CH_4 (0x00010UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD2CR_AWD2CH_5 (0x00020UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD2CR_AWD2CH_6 (0x00040UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD2CR_AWD2CH_7 (0x00080UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD2CR_AWD2CH_8 (0x00100UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD2CR_AWD2CH_9 (0x00200UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD2CR_AWD2CH_10 (0x00400UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD2CR_AWD2CH_11 (0x00800UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD2CR_AWD2CH_12 (0x01000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD2CR_AWD2CH_13 (0x02000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD2CR_AWD2CH_14 (0x04000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD2CR_AWD2CH_15 (0x08000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD2CR_AWD2CH_16 (0x10000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD2CR_AWD2CH_17 (0x20000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD2CR_AWD2CH_18 (0x40000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00040000 */ +#define ADC_AWD2CR_AWD2CH_19 (0x80000UL << ADC_AWD2CR_AWD2CH_Pos) /*!< 0x00080000 */ + +/******************** Bit definition for ADC_AWD3CR register ********************/ +#define ADC_AWD3CR_AWD3CH_Pos (0U) +#define ADC_AWD3CR_AWD3CH_Msk (0xFFFFFUL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x000FFFFF */ +#define ADC_AWD3CR_AWD3CH ADC_AWD3CR_AWD3CH_Msk /*!< ADC Analog watchdog 2 channel selection */ +#define ADC_AWD3CR_AWD3CH_0 (0x00001UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000001 */ +#define ADC_AWD3CR_AWD3CH_1 (0x00002UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000002 */ +#define ADC_AWD3CR_AWD3CH_2 (0x00004UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000004 */ +#define ADC_AWD3CR_AWD3CH_3 (0x00008UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000008 */ +#define ADC_AWD3CR_AWD3CH_4 (0x00010UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000010 */ +#define ADC_AWD3CR_AWD3CH_5 (0x00020UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000020 */ +#define ADC_AWD3CR_AWD3CH_6 (0x00040UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000040 */ +#define ADC_AWD3CR_AWD3CH_7 (0x00080UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000080 */ +#define ADC_AWD3CR_AWD3CH_8 (0x00100UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000100 */ +#define ADC_AWD3CR_AWD3CH_9 (0x00200UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000200 */ +#define ADC_AWD3CR_AWD3CH_10 (0x00400UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000400 */ +#define ADC_AWD3CR_AWD3CH_11 (0x00800UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00000800 */ +#define ADC_AWD3CR_AWD3CH_12 (0x01000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00001000 */ +#define ADC_AWD3CR_AWD3CH_13 (0x02000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00002000 */ +#define ADC_AWD3CR_AWD3CH_14 (0x04000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00004000 */ +#define ADC_AWD3CR_AWD3CH_15 (0x08000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00008000 */ +#define ADC_AWD3CR_AWD3CH_16 (0x10000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00010000 */ +#define ADC_AWD3CR_AWD3CH_17 (0x20000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00020000 */ +#define ADC_AWD3CR_AWD3CH_18 (0x40000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00040000 */ +#define ADC_AWD3CR_AWD3CH_19 (0x80000UL << ADC_AWD3CR_AWD3CH_Pos) /*!< 0x00080000 */ + +/******************** Bit definition for ADC_DIFSEL register ********************/ +#define ADC_DIFSEL_DIFSEL_Pos (0U) +#define ADC_DIFSEL_DIFSEL_Msk (0xFFFFFUL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x000FFFFF */ +#define ADC_DIFSEL_DIFSEL ADC_DIFSEL_DIFSEL_Msk /*!< ADC differential modes for channels 1 to 18 */ +#define ADC_DIFSEL_DIFSEL_0 (0x00001UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000001 */ +#define ADC_DIFSEL_DIFSEL_1 (0x00002UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000002 */ +#define ADC_DIFSEL_DIFSEL_2 (0x00004UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000004 */ +#define ADC_DIFSEL_DIFSEL_3 (0x00008UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000008 */ +#define ADC_DIFSEL_DIFSEL_4 (0x00010UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000010 */ +#define ADC_DIFSEL_DIFSEL_5 (0x00020UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000020 */ +#define ADC_DIFSEL_DIFSEL_6 (0x00040UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000040 */ +#define ADC_DIFSEL_DIFSEL_7 (0x00080UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000080 */ +#define ADC_DIFSEL_DIFSEL_8 (0x00100UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000100 */ +#define ADC_DIFSEL_DIFSEL_9 (0x00200UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000200 */ +#define ADC_DIFSEL_DIFSEL_10 (0x00400UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000400 */ +#define ADC_DIFSEL_DIFSEL_11 (0x00800UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00000800 */ +#define ADC_DIFSEL_DIFSEL_12 (0x01000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00001000 */ +#define ADC_DIFSEL_DIFSEL_13 (0x02000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00002000 */ +#define ADC_DIFSEL_DIFSEL_14 (0x04000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00004000 */ +#define ADC_DIFSEL_DIFSEL_15 (0x08000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00008000 */ +#define ADC_DIFSEL_DIFSEL_16 (0x10000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00010000 */ +#define ADC_DIFSEL_DIFSEL_17 (0x20000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00020000 */ +#define ADC_DIFSEL_DIFSEL_18 (0x40000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00040000 */ +#define ADC_DIFSEL_DIFSEL_19 (0x80000UL << ADC_DIFSEL_DIFSEL_Pos) /*!< 0x00080000 */ + +/******************** Bit definition for ADC_CALFACT register ********************/ +#define ADC_CALFACT_CALFACT_S_Pos (0U) +#define ADC_CALFACT_CALFACT_S_Msk (0x7FFUL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x000007FF */ +#define ADC_CALFACT_CALFACT_S ADC_CALFACT_CALFACT_S_Msk /*!< ADC calibration factors in single-ended mode */ +#define ADC_CALFACT_CALFACT_S_0 (0x001UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT_CALFACT_S_1 (0x002UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT_CALFACT_S_2 (0x004UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT_CALFACT_S_3 (0x008UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT_CALFACT_S_4 (0x010UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT_CALFACT_S_5 (0x020UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT_CALFACT_S_6 (0x040UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000040 */ +#define ADC_CALFACT_CALFACT_S_7 (0x080UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000080 */ +#define ADC_CALFACT_CALFACT_S_8 (0x100UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000100 */ +#define ADC_CALFACT_CALFACT_S_9 (0x200UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000200 */ +#define ADC_CALFACT_CALFACT_S_10 (0x400UL << ADC_CALFACT_CALFACT_S_Pos) /*!< 0x00000400 */ +#define ADC_CALFACT_CALFACT_D_Pos (16U) +#define ADC_CALFACT_CALFACT_D_Msk (0x7FFUL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x07FF0000 */ +#define ADC_CALFACT_CALFACT_D ADC_CALFACT_CALFACT_D_Msk /*!< ADC calibration factors in differential mode */ +#define ADC_CALFACT_CALFACT_D_0 (0x001UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT_CALFACT_D_1 (0x002UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT_CALFACT_D_2 (0x004UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT_CALFACT_D_3 (0x008UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT_CALFACT_D_4 (0x010UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT_CALFACT_D_5 (0x020UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT_CALFACT_D_6 (0x040UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00400000 */ +#define ADC_CALFACT_CALFACT_D_7 (0x080UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x00800000 */ +#define ADC_CALFACT_CALFACT_D_8 (0x100UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x01000000 */ +#define ADC_CALFACT_CALFACT_D_9 (0x200UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x02000000 */ +#define ADC_CALFACT_CALFACT_D_10 (0x400UL << ADC_CALFACT_CALFACT_D_Pos) /*!< 0x04000000 */ + +/******************** Bit definition for ADC_CALFACT2 register ********************/ +#define ADC_CALFACT2_LINCALFACT_Pos (0U) +#define ADC_CALFACT2_LINCALFACT_Msk (0x3FFFFFFFUL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x3FFFFFFF */ +#define ADC_CALFACT2_LINCALFACT ADC_CALFACT2_LINCALFACT_Msk /*!< ADC Linearity calibration factors */ +#define ADC_CALFACT2_LINCALFACT_0 (0x00000001UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000001 */ +#define ADC_CALFACT2_LINCALFACT_1 (0x00000002UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000002 */ +#define ADC_CALFACT2_LINCALFACT_2 (0x00000004UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000004 */ +#define ADC_CALFACT2_LINCALFACT_3 (0x00000008UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000008 */ +#define ADC_CALFACT2_LINCALFACT_4 (0x00000010UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000010 */ +#define ADC_CALFACT2_LINCALFACT_5 (0x00000020UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000020 */ +#define ADC_CALFACT2_LINCALFACT_6 (0x00000040UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000040 */ +#define ADC_CALFACT2_LINCALFACT_7 (0x00000080UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000080 */ +#define ADC_CALFACT2_LINCALFACT_8 (0x00000100UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000100 */ +#define ADC_CALFACT2_LINCALFACT_9 (0x00000200UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000200 */ +#define ADC_CALFACT2_LINCALFACT_10 (0x00000400UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000400 */ +#define ADC_CALFACT2_LINCALFACT_11 (0x00000800UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00000800 */ +#define ADC_CALFACT2_LINCALFACT_12 (0x00001000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00001000 */ +#define ADC_CALFACT2_LINCALFACT_13 (0x00002000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00002000 */ +#define ADC_CALFACT2_LINCALFACT_14 (0x00004000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00004000 */ +#define ADC_CALFACT2_LINCALFACT_15 (0x00008000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00008000 */ +#define ADC_CALFACT2_LINCALFACT_16 (0x00010000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00010000 */ +#define ADC_CALFACT2_LINCALFACT_17 (0x00020000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00020000 */ +#define ADC_CALFACT2_LINCALFACT_18 (0x00040000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00040000 */ +#define ADC_CALFACT2_LINCALFACT_19 (0x00080000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00080000 */ +#define ADC_CALFACT2_LINCALFACT_20 (0x00100000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00100000 */ +#define ADC_CALFACT2_LINCALFACT_21 (0x00200000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00200000 */ +#define ADC_CALFACT2_LINCALFACT_22 (0x00400000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00400000 */ +#define ADC_CALFACT2_LINCALFACT_23 (0x00800000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x00800000 */ +#define ADC_CALFACT2_LINCALFACT_24 (0x01000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x01000000 */ +#define ADC_CALFACT2_LINCALFACT_25 (0x02000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x02000000 */ +#define ADC_CALFACT2_LINCALFACT_26 (0x04000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x04000000 */ +#define ADC_CALFACT2_LINCALFACT_27 (0x08000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x08000000 */ +#define ADC_CALFACT2_LINCALFACT_28 (0x10000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x10000000 */ +#define ADC_CALFACT2_LINCALFACT_29 (0x20000000UL << ADC_CALFACT2_LINCALFACT_Pos) /*!< 0x20000000 */ + +/************************* ADC Common registers *****************************/ +/******************** Bit definition for ADC_CSR register ********************/ +#define ADC_CSR_ADRDY_MST_Pos (0U) +#define ADC_CSR_ADRDY_MST_Msk (0x1UL << ADC_CSR_ADRDY_MST_Pos) /*!< 0x00000001 */ +#define ADC_CSR_ADRDY_MST ADC_CSR_ADRDY_MST_Msk /*!< Master ADC ready */ +#define ADC_CSR_EOSMP_MST_Pos (1U) +#define ADC_CSR_EOSMP_MST_Msk (0x1UL << ADC_CSR_EOSMP_MST_Pos) /*!< 0x00000002 */ +#define ADC_CSR_EOSMP_MST ADC_CSR_EOSMP_MST_Msk /*!< End of sampling phase flag of the master ADC */ +#define ADC_CSR_EOC_MST_Pos (2U) +#define ADC_CSR_EOC_MST_Msk (0x1UL << ADC_CSR_EOC_MST_Pos) /*!< 0x00000004 */ +#define ADC_CSR_EOC_MST ADC_CSR_EOC_MST_Msk /*!< End of regular conversion of the master ADC */ +#define ADC_CSR_EOS_MST_Pos (3U) +#define ADC_CSR_EOS_MST_Msk (0x1UL << ADC_CSR_EOS_MST_Pos) /*!< 0x00000008 */ +#define ADC_CSR_EOS_MST ADC_CSR_EOS_MST_Msk /*!< End of regular sequence flag of the master ADC */ +#define ADC_CSR_OVR_MST_Pos (4U) +#define ADC_CSR_OVR_MST_Msk (0x1UL << ADC_CSR_OVR_MST_Pos) /*!< 0x00000010 */ +#define ADC_CSR_OVR_MST ADC_CSR_OVR_MST_Msk /*!< Overrun flag of the master ADC */ +#define ADC_CSR_JEOC_MST_Pos (5U) +#define ADC_CSR_JEOC_MST_Msk (0x1UL << ADC_CSR_JEOC_MST_Pos) /*!< 0x00000020 */ +#define ADC_CSR_JEOC_MST ADC_CSR_JEOC_MST_Msk /*!< End of injected conversion of the master ADC */ +#define ADC_CSR_JEOS_MST_Pos (6U) +#define ADC_CSR_JEOS_MST_Msk (0x1UL << ADC_CSR_JEOS_MST_Pos) /*!< 0x00000040 */ +#define ADC_CSR_JEOS_MST ADC_CSR_JEOS_MST_Msk /*!< End of injected sequence flag of the master ADC */ +#define ADC_CSR_AWD1_MST_Pos (7U) +#define ADC_CSR_AWD1_MST_Msk (0x1UL << ADC_CSR_AWD1_MST_Pos) /*!< 0x00000080 */ +#define ADC_CSR_AWD1_MST ADC_CSR_AWD1_MST_Msk /*!< Analog watchdog 1 flag of the master ADC */ +#define ADC_CSR_AWD2_MST_Pos (8U) +#define ADC_CSR_AWD2_MST_Msk (0x1UL << ADC_CSR_AWD2_MST_Pos) /*!< 0x00000100 */ +#define ADC_CSR_AWD2_MST ADC_CSR_AWD2_MST_Msk /*!< Analog watchdog 2 flag of the master ADC */ +#define ADC_CSR_AWD3_MST_Pos (9U) +#define ADC_CSR_AWD3_MST_Msk (0x1UL << ADC_CSR_AWD3_MST_Pos) /*!< 0x00000200 */ +#define ADC_CSR_AWD3_MST ADC_CSR_AWD3_MST_Msk /*!< Analog watchdog 3 flag of the master ADC */ +#define ADC_CSR_JQOVF_MST_Pos (10U) +#define ADC_CSR_JQOVF_MST_Msk (0x1UL << ADC_CSR_JQOVF_MST_Pos) /*!< 0x00000400 */ +#define ADC_CSR_JQOVF_MST ADC_CSR_JQOVF_MST_Msk /*!< Injected context queue overflow flag of the master ADC */ +#define ADC_CSR_ADRDY_SLV_Pos (16U) +#define ADC_CSR_ADRDY_SLV_Msk (0x1UL << ADC_CSR_ADRDY_SLV_Pos) /*!< 0x00010000 */ +#define ADC_CSR_ADRDY_SLV ADC_CSR_ADRDY_SLV_Msk /*!< Slave ADC ready */ +#define ADC_CSR_EOSMP_SLV_Pos (17U) +#define ADC_CSR_EOSMP_SLV_Msk (0x1UL << ADC_CSR_EOSMP_SLV_Pos) /*!< 0x00020000 */ +#define ADC_CSR_EOSMP_SLV ADC_CSR_EOSMP_SLV_Msk /*!< End of sampling phase flag of the slave ADC */ +#define ADC_CSR_EOC_SLV_Pos (18U) +#define ADC_CSR_EOC_SLV_Msk (0x1UL << ADC_CSR_EOC_SLV_Pos) /*!< 0x00040000 */ +#define ADC_CSR_EOC_SLV ADC_CSR_EOC_SLV_Msk /*!< End of regular conversion of the slave ADC */ +#define ADC_CSR_EOS_SLV_Pos (19U) +#define ADC_CSR_EOS_SLV_Msk (0x1UL << ADC_CSR_EOS_SLV_Pos) /*!< 0x00080000 */ +#define ADC_CSR_EOS_SLV ADC_CSR_EOS_SLV_Msk /*!< End of regular sequence flag of the slave ADC */ +#define ADC_CSR_OVR_SLV_Pos (20U) +#define ADC_CSR_OVR_SLV_Msk (0x1UL << ADC_CSR_OVR_SLV_Pos) /*!< 0x00100000 */ +#define ADC_CSR_OVR_SLV ADC_CSR_OVR_SLV_Msk /*!< Overrun flag of the slave ADC */ +#define ADC_CSR_JEOC_SLV_Pos (21U) +#define ADC_CSR_JEOC_SLV_Msk (0x1UL << ADC_CSR_JEOC_SLV_Pos) /*!< 0x00200000 */ +#define ADC_CSR_JEOC_SLV ADC_CSR_JEOC_SLV_Msk /*!< End of injected conversion of the slave ADC */ +#define ADC_CSR_JEOS_SLV_Pos (22U) +#define ADC_CSR_JEOS_SLV_Msk (0x1UL << ADC_CSR_JEOS_SLV_Pos) /*!< 0x00400000 */ +#define ADC_CSR_JEOS_SLV ADC_CSR_JEOS_SLV_Msk /*!< End of injected sequence flag of the slave ADC */ +#define ADC_CSR_AWD1_SLV_Pos (23U) +#define ADC_CSR_AWD1_SLV_Msk (0x1UL << ADC_CSR_AWD1_SLV_Pos) /*!< 0x00800000 */ +#define ADC_CSR_AWD1_SLV ADC_CSR_AWD1_SLV_Msk /*!< Analog watchdog 1 flag of the slave ADC */ +#define ADC_CSR_AWD2_SLV_Pos (24U) +#define ADC_CSR_AWD2_SLV_Msk (0x1UL << ADC_CSR_AWD2_SLV_Pos) /*!< 0x01000000 */ +#define ADC_CSR_AWD2_SLV ADC_CSR_AWD2_SLV_Msk /*!< Analog watchdog 2 flag of the slave ADC */ +#define ADC_CSR_AWD3_SLV_Pos (25U) +#define ADC_CSR_AWD3_SLV_Msk (0x1UL << ADC_CSR_AWD3_SLV_Pos) /*!< 0x02000000 */ +#define ADC_CSR_AWD3_SLV ADC_CSR_AWD3_SLV_Msk /*!< Analog watchdog 3 flag of the slave ADC */ +#define ADC_CSR_JQOVF_SLV_Pos (26U) +#define ADC_CSR_JQOVF_SLV_Msk (0x1UL << ADC_CSR_JQOVF_SLV_Pos) /*!< 0x04000000 */ +#define ADC_CSR_JQOVF_SLV ADC_CSR_JQOVF_SLV_Msk /*!< Injected context queue overflow flag of the slave ADC */ + +/******************** Bit definition for ADC_CCR register ********************/ +#define ADC_CCR_DUAL_Pos (0U) +#define ADC_CCR_DUAL_Msk (0x1FUL << ADC_CCR_DUAL_Pos) /*!< 0x0000001F */ +#define ADC_CCR_DUAL ADC_CCR_DUAL_Msk /*!< Dual ADC mode selection */ +#define ADC_CCR_DUAL_0 (0x01UL << ADC_CCR_DUAL_Pos) /*!< 0x00000001 */ +#define ADC_CCR_DUAL_1 (0x02UL << ADC_CCR_DUAL_Pos) /*!< 0x00000002 */ +#define ADC_CCR_DUAL_2 (0x04UL << ADC_CCR_DUAL_Pos) /*!< 0x00000004 */ +#define ADC_CCR_DUAL_3 (0x08UL << ADC_CCR_DUAL_Pos) /*!< 0x00000008 */ +#define ADC_CCR_DUAL_4 (0x10UL << ADC_CCR_DUAL_Pos) /*!< 0x00000010 */ + +#define ADC_CCR_DELAY_Pos (8U) +#define ADC_CCR_DELAY_Msk (0xFUL << ADC_CCR_DELAY_Pos) /*!< 0x00000F00 */ +#define ADC_CCR_DELAY ADC_CCR_DELAY_Msk /*!< Delay between 2 sampling phases */ +#define ADC_CCR_DELAY_0 (0x1UL << ADC_CCR_DELAY_Pos) /*!< 0x00000100 */ +#define ADC_CCR_DELAY_1 (0x2UL << ADC_CCR_DELAY_Pos) /*!< 0x00000200 */ +#define ADC_CCR_DELAY_2 (0x4UL << ADC_CCR_DELAY_Pos) /*!< 0x00000400 */ +#define ADC_CCR_DELAY_3 (0x8UL << ADC_CCR_DELAY_Pos) /*!< 0x00000800 */ + + +#define ADC_CCR_DAMDF_Pos (14U) +#define ADC_CCR_DAMDF_Msk (0x3UL << ADC_CCR_DAMDF_Pos) /*!< 0x0000C000 */ +#define ADC_CCR_DAMDF ADC_CCR_DAMDF_Msk /*!< Dual ADC mode Data format */ +#define ADC_CCR_DAMDF_0 (0x1UL << ADC_CCR_DAMDF_Pos) /*!< 0x00004000 */ +#define ADC_CCR_DAMDF_1 (0x2UL << ADC_CCR_DAMDF_Pos) /*!< 0x00008000 */ + +#define ADC_CCR_CKMODE_Pos (16U) +#define ADC_CCR_CKMODE_Msk (0x3UL << ADC_CCR_CKMODE_Pos) /*!< 0x00030000 */ +#define ADC_CCR_CKMODE ADC_CCR_CKMODE_Msk /*!< ADC clock mode */ +#define ADC_CCR_CKMODE_0 (0x1UL << ADC_CCR_CKMODE_Pos) /*!< 0x00010000 */ +#define ADC_CCR_CKMODE_1 (0x2UL << ADC_CCR_CKMODE_Pos) /*!< 0x00020000 */ + +#define ADC_CCR_PRESC_Pos (18U) +#define ADC_CCR_PRESC_Msk (0xFUL << ADC_CCR_PRESC_Pos) /*!< 0x003C0000 */ +#define ADC_CCR_PRESC ADC_CCR_PRESC_Msk /*!< ADC prescaler */ +#define ADC_CCR_PRESC_0 (0x1UL << ADC_CCR_PRESC_Pos) /*!< 0x00040000 */ +#define ADC_CCR_PRESC_1 (0x2UL << ADC_CCR_PRESC_Pos) /*!< 0x00080000 */ +#define ADC_CCR_PRESC_2 (0x4UL << ADC_CCR_PRESC_Pos) /*!< 0x00100000 */ +#define ADC_CCR_PRESC_3 (0x8UL << ADC_CCR_PRESC_Pos) /*!< 0x00200000 */ + +#define ADC_CCR_VREFEN_Pos (22U) +#define ADC_CCR_VREFEN_Msk (0x1UL << ADC_CCR_VREFEN_Pos) /*!< 0x00400000 */ +#define ADC_CCR_VREFEN ADC_CCR_VREFEN_Msk /*!< VREFINT enable */ +#define ADC_CCR_TSEN_Pos (23U) +#define ADC_CCR_TSEN_Msk (0x1UL << ADC_CCR_TSEN_Pos) /*!< 0x00800000 */ +#define ADC_CCR_TSEN ADC_CCR_TSEN_Msk /*!< Temperature sensor enable */ +#define ADC_CCR_VBATEN_Pos (24U) +#define ADC_CCR_VBATEN_Msk (0x1UL << ADC_CCR_VBATEN_Pos) /*!< 0x01000000 */ +#define ADC_CCR_VBATEN ADC_CCR_VBATEN_Msk /*!< VBAT enable */ + +/******************** Bit definition for ADC_CDR register *******************/ +#define ADC_CDR_RDATA_MST_Pos (0U) +#define ADC_CDR_RDATA_MST_Msk (0xFFFFUL << ADC_CDR_RDATA_MST_Pos) /*!< 0x0000FFFF */ +#define ADC_CDR_RDATA_MST ADC_CDR_RDATA_MST_Msk /*!< ADC multimode master group regular conversion data */ + +#define ADC_CDR_RDATA_SLV_Pos (16U) +#define ADC_CDR_RDATA_SLV_Msk (0xFFFFUL << ADC_CDR_RDATA_SLV_Pos) /*!< 0xFFFF0000 */ +#define ADC_CDR_RDATA_SLV ADC_CDR_RDATA_SLV_Msk /*!< ADC multimode slave group regular conversion data */ + +/******************** Bit definition for ADC_CDR2 register ******************/ +#define ADC_CDR2_RDATA_ALT_Pos (0U) +#define ADC_CDR2_RDATA_ALT_Msk (0xFFFFFFFFUL << ADC_CDR2_RDATA_ALT_Pos) /*!< 0xFFFFFFFF */ +#define ADC_CDR2_RDATA_ALT ADC_CDR2_RDATA_ALT_Msk /*!< Regular data of the master/slave alternated ADCs */ + + +/******************************************************************************/ +/* */ +/* VREFBUF */ +/* */ +/******************************************************************************/ +/******************* Bit definition for VREFBUF_CSR register ****************/ +#define VREFBUF_CSR_ENVR_Pos (0U) +#define VREFBUF_CSR_ENVR_Msk (0x1UL << VREFBUF_CSR_ENVR_Pos) /*!< 0x00000001 */ +#define VREFBUF_CSR_ENVR VREFBUF_CSR_ENVR_Msk /*!*/ +#define DAC_CR_CEN1_Pos (14U) +#define DAC_CR_CEN1_Msk (0x1UL << DAC_CR_CEN1_Pos) /*!< 0x00004000 */ +#define DAC_CR_CEN1 DAC_CR_CEN1_Msk /*!*/ + +#define DAC_CR_EN2_Pos (16U) +#define DAC_CR_EN2_Msk (0x1UL << DAC_CR_EN2_Pos) /*!< 0x00010000 */ +#define DAC_CR_EN2 DAC_CR_EN2_Msk /*!*/ +#define DAC_CR_CEN2_Pos (30U) +#define DAC_CR_CEN2_Msk (0x1UL << DAC_CR_CEN2_Pos) /*!< 0x40000000 */ +#define DAC_CR_CEN2 DAC_CR_CEN2_Msk /*!*/ + +/***************** Bit definition for DAC_SWTRIGR register ******************/ +#define DAC_SWTRIGR_SWTRIG1_Pos (0U) +#define DAC_SWTRIGR_SWTRIG1_Msk (0x1UL << DAC_SWTRIGR_SWTRIG1_Pos) /*!< 0x00000001 */ +#define DAC_SWTRIGR_SWTRIG1 DAC_SWTRIGR_SWTRIG1_Msk /*!> 1) /* 1 MB */ +#define FLASH_SECTOR_SIZE 0x00002000UL /* 8 KB */ +#define FLASH_LATENCY_DEFAULT FLASH_ACR_LATENCY_3WS /* FLASH Three Latency cycles */ +#define FLASH_NB_32BITWORD_IN_FLASHWORD 4U /* 128 bits */ +#define DUAL_BANK /* Dual-bank Flash */ + +/******************* Bits definition for FLASH_ACR register **********************/ +#define FLASH_ACR_LATENCY_Pos (0U) +#define FLASH_ACR_LATENCY_Msk (0xFUL << FLASH_ACR_LATENCY_Pos) /*!< 0x0000000F: bit4 is kept only for legacy purpose */ +#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< Read Latency */ +#define FLASH_ACR_LATENCY_0WS (0x00000000UL) +#define FLASH_ACR_LATENCY_1WS (0x00000001UL) +#define FLASH_ACR_LATENCY_2WS (0x00000002UL) +#define FLASH_ACR_LATENCY_3WS (0x00000003UL) +#define FLASH_ACR_LATENCY_4WS (0x00000004UL) +#define FLASH_ACR_LATENCY_5WS (0x00000005UL) +#define FLASH_ACR_LATENCY_6WS (0x00000006UL) +#define FLASH_ACR_LATENCY_7WS (0x00000007UL) + +#define FLASH_ACR_WRHIGHFREQ_Pos (4U) +#define FLASH_ACR_WRHIGHFREQ_Msk (0x3UL << FLASH_ACR_WRHIGHFREQ_Pos) /*!< 0x00000030 */ +#define FLASH_ACR_WRHIGHFREQ FLASH_ACR_WRHIGHFREQ_Msk /*!< Flash signal delay */ +#define FLASH_ACR_WRHIGHFREQ_0 (0x1UL << FLASH_ACR_WRHIGHFREQ_Pos) /*!< 0x00000010 */ +#define FLASH_ACR_WRHIGHFREQ_1 (0x2UL << FLASH_ACR_WRHIGHFREQ_Pos) /*!< 0x00000020 */ + +/* Legacy FLASH Latency defines */ +#define FLASH_ACR_LATENCY_8WS (0x00000008UL) +#define FLASH_ACR_LATENCY_9WS (0x00000009UL) +#define FLASH_ACR_LATENCY_10WS (0x0000000AUL) +#define FLASH_ACR_LATENCY_11WS (0x0000000BUL) +#define FLASH_ACR_LATENCY_12WS (0x0000000CUL) +#define FLASH_ACR_LATENCY_13WS (0x0000000DUL) +#define FLASH_ACR_LATENCY_14WS (0x0000000EUL) +#define FLASH_ACR_LATENCY_15WS (0x0000000FUL) +/******************* Bits definition for FLASH_CR register ***********************/ +#define FLASH_CR_LOCK_Pos (0U) +#define FLASH_CR_LOCK_Msk (0x1UL << FLASH_CR_LOCK_Pos) /*!< 0x00000001 */ +#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Configuration lock bit */ +#define FLASH_CR_PG_Pos (1U) +#define FLASH_CR_PG_Msk (0x1UL << FLASH_CR_PG_Pos) /*!< 0x00000002 */ +#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Internal buffer control bit */ +#define FLASH_CR_SER_Pos (2U) +#define FLASH_CR_SER_Msk (0x1UL << FLASH_CR_SER_Pos) /*!< 0x00000004 */ +#define FLASH_CR_SER FLASH_CR_SER_Msk /*!< Sector erase request */ +#define FLASH_CR_BER_Pos (3U) +#define FLASH_CR_BER_Msk (0x1UL << FLASH_CR_BER_Pos) /*!< 0x00000008 */ +#define FLASH_CR_BER FLASH_CR_BER_Msk /*!< Bank erase request */ +#define FLASH_CR_FW_Pos (4U) +#define FLASH_CR_FW_Msk (0x1UL << FLASH_CR_FW_Pos) /*!< 0x00000010 */ +#define FLASH_CR_FW FLASH_CR_FW_Msk /*!< Write forcing control bit */ +#define FLASH_CR_START_Pos (5U) +#define FLASH_CR_START_Msk (0x1UL << FLASH_CR_START_Pos) /*!< 0x00000020 */ +#define FLASH_CR_START FLASH_CR_START_Msk /*!< Erase start control bit */ +#define FLASH_CR_SNB_Pos (6U) +#define FLASH_CR_SNB_Msk (0x7FUL << FLASH_CR_SNB_Pos) /*!< 0x00001FC0 */ +#define FLASH_CR_SNB FLASH_CR_SNB_Msk /*!< Sector erase selection number */ +#define FLASH_CR_SNB_0 (0x01UL << FLASH_CR_SNB_Pos) /*!< 0x00000040 */ +#define FLASH_CR_SNB_1 (0x02UL << FLASH_CR_SNB_Pos) /*!< 0x00000080 */ +#define FLASH_CR_SNB_2 (0x04UL << FLASH_CR_SNB_Pos) /*!< 0x00000100 */ +#define FLASH_CR_SNB_3 (0x08UL << FLASH_CR_SNB_Pos) /*!< 0x00000200 */ +#define FLASH_CR_SNB_4 (0x10UL << FLASH_CR_SNB_Pos) /*!< 0x00000400 */ +#define FLASH_CR_SNB_5 (0x20UL << FLASH_CR_SNB_Pos) /*!< 0x00000800 */ +#define FLASH_CR_SNB_6 (0x40UL << FLASH_CR_SNB_Pos) /*!< 0x00001000 */ +#define FLASH_CR_CRC_EN_Pos (15U) +#define FLASH_CR_CRC_EN_Msk (0x1UL << FLASH_CR_CRC_EN_Pos) /*!< 0x00008000 */ +#define FLASH_CR_CRC_EN FLASH_CR_CRC_EN_Msk /*!< CRC control bit */ +#define FLASH_CR_EOPIE_Pos (16U) +#define FLASH_CR_EOPIE_Msk (0x1UL << FLASH_CR_EOPIE_Pos) /*!< 0x00010000 */ +#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End-of-program interrupt control bit */ +#define FLASH_CR_WRPERRIE_Pos (17U) +#define FLASH_CR_WRPERRIE_Msk (0x1UL << FLASH_CR_WRPERRIE_Pos) /*!< 0x00020000 */ +#define FLASH_CR_WRPERRIE FLASH_CR_WRPERRIE_Msk /*!< Write protection error interrupt enable bit */ +#define FLASH_CR_PGSERRIE_Pos (18U) +#define FLASH_CR_PGSERRIE_Msk (0x1UL << FLASH_CR_PGSERRIE_Pos) /*!< 0x00040000 */ +#define FLASH_CR_PGSERRIE FLASH_CR_PGSERRIE_Msk /*!< Programming sequence error interrupt enable bit */ +#define FLASH_CR_STRBERRIE_Pos (19U) +#define FLASH_CR_STRBERRIE_Msk (0x1UL << FLASH_CR_STRBERRIE_Pos) /*!< 0x00080000 */ +#define FLASH_CR_STRBERRIE FLASH_CR_STRBERRIE_Msk /*!< Strobe error interrupt enable bit */ +#define FLASH_CR_INCERRIE_Pos (21U) +#define FLASH_CR_INCERRIE_Msk (0x1UL << FLASH_CR_INCERRIE_Pos) /*!< 0x00200000 */ +#define FLASH_CR_INCERRIE FLASH_CR_INCERRIE_Msk /*!< Inconsistency error interrupt enable bit */ +#define FLASH_CR_RDPERRIE_Pos (23U) +#define FLASH_CR_RDPERRIE_Msk (0x1UL << FLASH_CR_RDPERRIE_Pos) /*!< 0x00800000 */ +#define FLASH_CR_RDPERRIE FLASH_CR_RDPERRIE_Msk /*!< Read protection error interrupt enable bit */ +#define FLASH_CR_RDSERRIE_Pos (24U) +#define FLASH_CR_RDSERRIE_Msk (0x1UL << FLASH_CR_RDSERRIE_Pos) /*!< 0x01000000 */ +#define FLASH_CR_RDSERRIE FLASH_CR_RDSERRIE_Msk /*!< Secure error interrupt enable bit */ +#define FLASH_CR_SNECCERRIE_Pos (25U) +#define FLASH_CR_SNECCERRIE_Msk (0x1UL << FLASH_CR_SNECCERRIE_Pos) /*!< 0x02000000 */ +#define FLASH_CR_SNECCERRIE FLASH_CR_SNECCERRIE_Msk /*!< ECC single correction error interrupt enable bit */ +#define FLASH_CR_DBECCERRIE_Pos (26U) +#define FLASH_CR_DBECCERRIE_Msk (0x1UL << FLASH_CR_DBECCERRIE_Pos) /*!< 0x04000000 */ +#define FLASH_CR_DBECCERRIE FLASH_CR_DBECCERRIE_Msk /*!< ECC double detection error interrupt enable bit */ +#define FLASH_CR_CRCENDIE_Pos (27U) +#define FLASH_CR_CRCENDIE_Msk (0x1UL << FLASH_CR_CRCENDIE_Pos) /*!< 0x08000000 */ +#define FLASH_CR_CRCENDIE FLASH_CR_CRCENDIE_Msk /*!< CRC end of calculation interrupt enable bit */ +#define FLASH_CR_CRCRDERRIE_Pos (28U) +#define FLASH_CR_CRCRDERRIE_Msk (0x1UL << FLASH_CR_CRCRDERRIE_Pos) /*!< 0x10000000 */ +#define FLASH_CR_CRCRDERRIE FLASH_CR_CRCRDERRIE_Msk /*!< CRC read error interrupt enable bit */ + +/******************* Bits definition for FLASH_SR register ***********************/ +#define FLASH_SR_BSY_Pos (0U) +#define FLASH_SR_BSY_Msk (0x1UL << FLASH_SR_BSY_Pos) /*!< 0x00000001 */ +#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Busy flag */ +#define FLASH_SR_WBNE_Pos (1U) +#define FLASH_SR_WBNE_Msk (0x1UL << FLASH_SR_WBNE_Pos) /*!< 0x00000002 */ +#define FLASH_SR_WBNE FLASH_SR_WBNE_Msk /*!< Write buffer not empty flag */ +#define FLASH_SR_QW_Pos (2U) +#define FLASH_SR_QW_Msk (0x1UL << FLASH_SR_QW_Pos) /*!< 0x00000004 */ +#define FLASH_SR_QW FLASH_SR_QW_Msk /*!< Wait queue flag */ +#define FLASH_SR_CRC_BUSY_Pos (3U) +#define FLASH_SR_CRC_BUSY_Msk (0x1UL << FLASH_SR_CRC_BUSY_Pos) /*!< 0x00000008 */ +#define FLASH_SR_CRC_BUSY FLASH_SR_CRC_BUSY_Msk /*!< CRC busy flag */ +#define FLASH_SR_EOP_Pos (16U) +#define FLASH_SR_EOP_Msk (0x1UL << FLASH_SR_EOP_Pos) /*!< 0x00010000 */ +#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End-of-program flag */ +#define FLASH_SR_WRPERR_Pos (17U) +#define FLASH_SR_WRPERR_Msk (0x1UL << FLASH_SR_WRPERR_Pos) /*!< 0x00020000 */ +#define FLASH_SR_WRPERR FLASH_SR_WRPERR_Msk /*!< Write protection error flag */ +#define FLASH_SR_PGSERR_Pos (18U) +#define FLASH_SR_PGSERR_Msk (0x1UL << FLASH_SR_PGSERR_Pos) /*!< 0x00040000 */ +#define FLASH_SR_PGSERR FLASH_SR_PGSERR_Msk /*!< Programming sequence error flag */ +#define FLASH_SR_STRBERR_Pos (19U) +#define FLASH_SR_STRBERR_Msk (0x1UL << FLASH_SR_STRBERR_Pos) /*!< 0x00080000 */ +#define FLASH_SR_STRBERR FLASH_SR_STRBERR_Msk /*!< Strobe error flag */ +#define FLASH_SR_INCERR_Pos (21U) +#define FLASH_SR_INCERR_Msk (0x1UL << FLASH_SR_INCERR_Pos) /*!< 0x00200000 */ +#define FLASH_SR_INCERR FLASH_SR_INCERR_Msk /*!< Inconsistency error flag */ +#define FLASH_SR_RDPERR_Pos (23U) +#define FLASH_SR_RDPERR_Msk (0x1UL << FLASH_SR_RDPERR_Pos) /*!< 0x00800000 */ +#define FLASH_SR_RDPERR FLASH_SR_RDPERR_Msk /*!< Read protection error flag */ +#define FLASH_SR_RDSERR_Pos (24U) +#define FLASH_SR_RDSERR_Msk (0x1UL << FLASH_SR_RDSERR_Pos) /*!< 0x01000000 */ +#define FLASH_SR_RDSERR FLASH_SR_RDSERR_Msk /*!< Secure error flag */ +#define FLASH_SR_SNECCERR_Pos (25U) +#define FLASH_SR_SNECCERR_Msk (0x1UL << FLASH_SR_SNECCERR_Pos) /*!< 0x02000000 */ +#define FLASH_SR_SNECCERR FLASH_SR_SNECCERR_Msk /*!< Single correction error flag */ +#define FLASH_SR_DBECCERR_Pos (26U) +#define FLASH_SR_DBECCERR_Msk (0x1UL << FLASH_SR_DBECCERR_Pos) /*!< 0x04000000 */ +#define FLASH_SR_DBECCERR FLASH_SR_DBECCERR_Msk /*!< ECC double detection error flag */ +#define FLASH_SR_CRCEND_Pos (27U) +#define FLASH_SR_CRCEND_Msk (0x1UL << FLASH_SR_CRCEND_Pos) /*!< 0x08000000 */ +#define FLASH_SR_CRCEND FLASH_SR_CRCEND_Msk /*!< CRC end of calculation flag */ +#define FLASH_SR_CRCRDERR_Pos (28U) +#define FLASH_SR_CRCRDERR_Msk (0x1UL << FLASH_SR_CRCRDERR_Pos) /*!< 0x10000000 */ +#define FLASH_SR_CRCRDERR FLASH_SR_CRCRDERR_Msk /*!< CRC read error flag */ + +/******************* Bits definition for FLASH_CCR register *******************/ +#define FLASH_CCR_CLR_EOP_Pos (16U) +#define FLASH_CCR_CLR_EOP_Msk (0x1UL << FLASH_CCR_CLR_EOP_Pos) /*!< 0x00010000 */ +#define FLASH_CCR_CLR_EOP FLASH_CCR_CLR_EOP_Msk /*!< EOP flag clear bit */ +#define FLASH_CCR_CLR_WRPERR_Pos (17U) +#define FLASH_CCR_CLR_WRPERR_Msk (0x1UL << FLASH_CCR_CLR_WRPERR_Pos) /*!< 0x00020000 */ +#define FLASH_CCR_CLR_WRPERR FLASH_CCR_CLR_WRPERR_Msk /*!< WRPERR flag clear bit */ +#define FLASH_CCR_CLR_PGSERR_Pos (18U) +#define FLASH_CCR_CLR_PGSERR_Msk (0x1UL << FLASH_CCR_CLR_PGSERR_Pos) /*!< 0x00040000 */ +#define FLASH_CCR_CLR_PGSERR FLASH_CCR_CLR_PGSERR_Msk /*!< PGSERR flag clear bit */ +#define FLASH_CCR_CLR_STRBERR_Pos (19U) +#define FLASH_CCR_CLR_STRBERR_Msk (0x1UL << FLASH_CCR_CLR_STRBERR_Pos) /*!< 0x00080000 */ +#define FLASH_CCR_CLR_STRBERR FLASH_CCR_CLR_STRBERR_Msk /*!< STRBERR flag clear bit */ +#define FLASH_CCR_CLR_INCERR_Pos (21U) +#define FLASH_CCR_CLR_INCERR_Msk (0x1UL << FLASH_CCR_CLR_INCERR_Pos) /*!< 0x00200000 */ +#define FLASH_CCR_CLR_INCERR FLASH_CCR_CLR_INCERR_Msk /*!< INCERR flag clear bit */ +#define FLASH_CCR_CLR_RDPERR_Pos (23U) +#define FLASH_CCR_CLR_RDPERR_Msk (0x1UL << FLASH_CCR_CLR_RDPERR_Pos) /*!< 0x00800000 */ +#define FLASH_CCR_CLR_RDPERR FLASH_CCR_CLR_RDPERR_Msk /*!< RDPERR flag clear bit */ +#define FLASH_CCR_CLR_RDSERR_Pos (24U) +#define FLASH_CCR_CLR_RDSERR_Msk (0x1UL << FLASH_CCR_CLR_RDSERR_Pos) /*!< 0x01000000 */ +#define FLASH_CCR_CLR_RDSERR FLASH_CCR_CLR_RDSERR_Msk /*!< RDSERR flag clear bit */ +#define FLASH_CCR_CLR_SNECCERR_Pos (25U) +#define FLASH_CCR_CLR_SNECCERR_Msk (0x1UL << FLASH_CCR_CLR_SNECCERR_Pos) /*!< 0x02000000 */ +#define FLASH_CCR_CLR_SNECCERR FLASH_CCR_CLR_SNECCERR_Msk /*!< SNECCERR flag clear bit */ +#define FLASH_CCR_CLR_DBECCERR_Pos (26U) +#define FLASH_CCR_CLR_DBECCERR_Msk (0x1UL << FLASH_CCR_CLR_DBECCERR_Pos) /*!< 0x04000000 */ +#define FLASH_CCR_CLR_DBECCERR FLASH_CCR_CLR_DBECCERR_Msk /*!< DBECCERR flag clear bit */ +#define FLASH_CCR_CLR_CRCEND_Pos (27U) +#define FLASH_CCR_CLR_CRCEND_Msk (0x1UL << FLASH_CCR_CLR_CRCEND_Pos) /*!< 0x08000000 */ +#define FLASH_CCR_CLR_CRCEND FLASH_CCR_CLR_CRCEND_Msk /*!< CRCEND flag clear bit */ +#define FLASH_CCR_CLR_CRCRDERR_Pos (28U) +#define FLASH_CCR_CLR_CRCRDERR_Msk (0x1UL << FLASH_CCR_CLR_CRCRDERR_Pos) /*!< 0x10000000 */ +#define FLASH_CCR_CLR_CRCRDERR FLASH_CCR_CLR_CRCRDERR_Msk /*!< CRCRDERR flag clear bit */ + +/******************* Bits definition for FLASH_OPTCR register *******************/ +#define FLASH_OPTCR_OPTLOCK_Pos (0U) +#define FLASH_OPTCR_OPTLOCK_Msk (0x1UL << FLASH_OPTCR_OPTLOCK_Pos) /*!< 0x00000001 */ +#define FLASH_OPTCR_OPTLOCK FLASH_OPTCR_OPTLOCK_Msk /*!< FLASH_OPTCR lock option configuration bit */ +#define FLASH_OPTCR_OPTSTART_Pos (1U) +#define FLASH_OPTCR_OPTSTART_Msk (0x1UL << FLASH_OPTCR_OPTSTART_Pos) /*!< 0x00000002 */ +#define FLASH_OPTCR_OPTSTART FLASH_OPTCR_OPTSTART_Msk /*!< Option byte start change option configuration bit */ +#define FLASH_OPTCR_MER_Pos (4U) +#define FLASH_OPTCR_MER_Msk (0x1UL << FLASH_OPTCR_MER_Pos) /*!< 0x00000010 */ +#define FLASH_OPTCR_MER FLASH_OPTCR_MER_Msk /*!< Mass erase request */ +#define FLASH_OPTCR_PG_OTP_Pos (5U) +#define FLASH_OPTCR_PG_OTP_Msk (0x1UL << FLASH_OPTCR_PG_OTP_Pos) /*!< 0x00000020 */ +#define FLASH_OPTCR_PG_OTP FLASH_OPTCR_PG_OTP_Msk /*!< OTP program control bit */ +#define FLASH_OPTCR_OPTCHANGEERRIE_Pos (30U) +#define FLASH_OPTCR_OPTCHANGEERRIE_Msk (0x1UL << FLASH_OPTCR_OPTCHANGEERRIE_Pos) /*!< 0x40000000 */ +#define FLASH_OPTCR_OPTCHANGEERRIE FLASH_OPTCR_OPTCHANGEERRIE_Msk /*!< Option byte change error interrupt enable bit */ +#define FLASH_OPTCR_SWAP_BANK_Pos (31U) +#define FLASH_OPTCR_SWAP_BANK_Msk (0x1UL << FLASH_OPTCR_SWAP_BANK_Pos) /*!< 0x80000000 */ +#define FLASH_OPTCR_SWAP_BANK FLASH_OPTCR_SWAP_BANK_Msk /*!< Bank swapping option configuration bit */ + +/******************* Bits definition for FLASH_OPTSR register ***************/ +#define FLASH_OPTSR_OPT_BUSY_Pos (0U) +#define FLASH_OPTSR_OPT_BUSY_Msk (0x1UL << FLASH_OPTSR_OPT_BUSY_Pos) /*!< 0x00000001 */ +#define FLASH_OPTSR_OPT_BUSY FLASH_OPTSR_OPT_BUSY_Msk /*!< Option byte change ongoing flag */ +#define FLASH_OPTSR_BOR_LEV_Pos (2U) +#define FLASH_OPTSR_BOR_LEV_Msk (0x3UL << FLASH_OPTSR_BOR_LEV_Pos) /*!< 0x0000000C */ +#define FLASH_OPTSR_BOR_LEV FLASH_OPTSR_BOR_LEV_Msk /*!< Brownout level option status bit */ +#define FLASH_OPTSR_BOR_LEV_0 (0x1UL << FLASH_OPTSR_BOR_LEV_Pos) /*!< 0x00000004 */ +#define FLASH_OPTSR_BOR_LEV_1 (0x2UL << FLASH_OPTSR_BOR_LEV_Pos) /*!< 0x00000008 */ +#define FLASH_OPTSR_IWDG1_SW_Pos (4U) +#define FLASH_OPTSR_IWDG1_SW_Msk (0x1UL << FLASH_OPTSR_IWDG1_SW_Pos) /*!< 0x00000010 */ +#define FLASH_OPTSR_IWDG1_SW FLASH_OPTSR_IWDG1_SW_Msk /*!< IWDG1 control mode option status bit */ +#define FLASH_OPTSR_NRST_STOP_D1_Pos (6U) +#define FLASH_OPTSR_NRST_STOP_D1_Msk (0x1UL << FLASH_OPTSR_NRST_STOP_D1_Pos) /*!< 0x00000040 */ +#define FLASH_OPTSR_NRST_STOP_D1 FLASH_OPTSR_NRST_STOP_D1_Msk /*!< D1 domain DStop entry reset option status bit */ +#define FLASH_OPTSR_NRST_STBY_D1_Pos (7U) +#define FLASH_OPTSR_NRST_STBY_D1_Msk (0x1UL << FLASH_OPTSR_NRST_STBY_D1_Pos) /*!< 0x00000080 */ +#define FLASH_OPTSR_NRST_STBY_D1 FLASH_OPTSR_NRST_STBY_D1_Msk /*!< D1 domain DStandby entry reset option status bit */ +#define FLASH_OPTSR_RDP_Pos (8U) +#define FLASH_OPTSR_RDP_Msk (0xFFUL << FLASH_OPTSR_RDP_Pos) /*!< 0x0000FF00 */ +#define FLASH_OPTSR_RDP FLASH_OPTSR_RDP_Msk /*!< Readout protection level option status byte */ +#define FLASH_OPTSR_VDDMMC_HSLV_Pos (16U) +#define FLASH_OPTSR_VDDMMC_HSLV_Msk (0x1UL << FLASH_OPTSR_VDDMMC_HSLV_Pos) /*!< 0x00010000 */ +#define FLASH_OPTSR_VDDMMC_HSLV FLASH_OPTSR_VDDMMC_HSLV_Msk /*!< VDDMMC I/O high-speed at low-voltage status bit (below 2.5V) */ +#define FLASH_OPTSR_FZ_IWDG_STOP_Pos (17U) +#define FLASH_OPTSR_FZ_IWDG_STOP_Msk (0x1UL << FLASH_OPTSR_FZ_IWDG_STOP_Pos) /*!< 0x00020000 */ +#define FLASH_OPTSR_FZ_IWDG_STOP FLASH_OPTSR_FZ_IWDG_STOP_Msk /*!< IWDG Stop mode freeze option status bit */ +#define FLASH_OPTSR_FZ_IWDG_SDBY_Pos (18U) +#define FLASH_OPTSR_FZ_IWDG_SDBY_Msk (0x1UL << FLASH_OPTSR_FZ_IWDG_SDBY_Pos) /*!< 0x00040000 */ +#define FLASH_OPTSR_FZ_IWDG_SDBY FLASH_OPTSR_FZ_IWDG_SDBY_Msk /*!< IWDG Standby mode freeze option status bit */ +#define FLASH_OPTSR_ST_RAM_SIZE_Pos (19U) +#define FLASH_OPTSR_ST_RAM_SIZE_Msk (0x3UL << FLASH_OPTSR_ST_RAM_SIZE_Pos) /*!< 0x00180000 */ +#define FLASH_OPTSR_ST_RAM_SIZE FLASH_OPTSR_ST_RAM_SIZE_Msk /*!< ST RAM size option status */ +#define FLASH_OPTSR_ST_RAM_SIZE_0 (0x1UL << FLASH_OPTSR_ST_RAM_SIZE_Pos) /*!< 0x00080000 */ +#define FLASH_OPTSR_ST_RAM_SIZE_1 (0x2UL << FLASH_OPTSR_ST_RAM_SIZE_Pos) /*!< 0x00100000 */ +#define FLASH_OPTSR_SECURITY_Pos (21U) +#define FLASH_OPTSR_SECURITY_Msk (0x1UL << FLASH_OPTSR_SECURITY_Pos) /*!< 0x00200000 */ +#define FLASH_OPTSR_SECURITY FLASH_OPTSR_SECURITY_Msk /*!< Security enable option status bit */ +#define FLASH_OPTSR_IO_HSLV_Pos (29U) +#define FLASH_OPTSR_IO_HSLV_Msk (0x1UL << FLASH_OPTSR_IO_HSLV_Pos) /*!< 0x20000000 */ +#define FLASH_OPTSR_IO_HSLV FLASH_OPTSR_IO_HSLV_Msk /*!< I/O high-speed at low-voltage status bit */ +#define FLASH_OPTSR_OPTCHANGEERR_Pos (30U) +#define FLASH_OPTSR_OPTCHANGEERR_Msk (0x1UL << FLASH_OPTSR_OPTCHANGEERR_Pos) /*!< 0x40000000 */ +#define FLASH_OPTSR_OPTCHANGEERR FLASH_OPTSR_OPTCHANGEERR_Msk /*!< Option byte change error flag */ +#define FLASH_OPTSR_SWAP_BANK_OPT_Pos (31U) +#define FLASH_OPTSR_SWAP_BANK_OPT_Msk (0x1UL << FLASH_OPTSR_SWAP_BANK_OPT_Pos) /*!< 0x80000000 */ +#define FLASH_OPTSR_SWAP_BANK_OPT FLASH_OPTSR_SWAP_BANK_OPT_Msk /*!< Bank swapping option status bit */ + +/******************* Bits definition for FLASH_OPTCCR register *******************/ +#define FLASH_OPTCCR_CLR_OPTCHANGEERR_Pos (30U) +#define FLASH_OPTCCR_CLR_OPTCHANGEERR_Msk (0x1UL << FLASH_OPTCCR_CLR_OPTCHANGEERR_Pos) /*!< 0x40000000 */ +#define FLASH_OPTCCR_CLR_OPTCHANGEERR FLASH_OPTCCR_CLR_OPTCHANGEERR_Msk /*!< OPTCHANGEERR reset bit */ + +/******************* Bits definition for FLASH_PRAR register *********************/ +#define FLASH_PRAR_PROT_AREA_START_Pos (0U) +#define FLASH_PRAR_PROT_AREA_START_Msk (0xFFFUL << FLASH_PRAR_PROT_AREA_START_Pos) /*!< 0x00000FFF */ +#define FLASH_PRAR_PROT_AREA_START FLASH_PRAR_PROT_AREA_START_Msk /*!< PCROP area start status bits */ +#define FLASH_PRAR_PROT_AREA_END_Pos (16U) +#define FLASH_PRAR_PROT_AREA_END_Msk (0xFFFUL << FLASH_PRAR_PROT_AREA_END_Pos) /*!< 0x0FFF0000 */ +#define FLASH_PRAR_PROT_AREA_END FLASH_PRAR_PROT_AREA_END_Msk /*!< PCROP area end status bits */ +#define FLASH_PRAR_DMEP_Pos (31U) +#define FLASH_PRAR_DMEP_Msk (0x1UL << FLASH_PRAR_DMEP_Pos) /*!< 0x80000000 */ +#define FLASH_PRAR_DMEP FLASH_PRAR_DMEP_Msk /*!< PCROP protected erase enable option status bit */ + +/******************* Bits definition for FLASH_SCAR register *********************/ +#define FLASH_SCAR_SEC_AREA_START_Pos (0U) +#define FLASH_SCAR_SEC_AREA_START_Msk (0xFFFUL << FLASH_SCAR_SEC_AREA_START_Pos) /*!< 0x00000FFF */ +#define FLASH_SCAR_SEC_AREA_START FLASH_SCAR_SEC_AREA_START_Msk /*!< Secure-only area start status bits */ +#define FLASH_SCAR_SEC_AREA_END_Pos (16U) +#define FLASH_SCAR_SEC_AREA_END_Msk (0xFFFUL << FLASH_SCAR_SEC_AREA_END_Pos) /*!< 0x0FFF0000 */ +#define FLASH_SCAR_SEC_AREA_END FLASH_SCAR_SEC_AREA_END_Msk /*!< Secure-only area end status bits */ +#define FLASH_SCAR_DMES_Pos (31U) +#define FLASH_SCAR_DMES_Msk (0x1UL << FLASH_SCAR_DMES_Pos) /*!< 0x80000000 */ +#define FLASH_SCAR_DMES FLASH_SCAR_DMES_Msk /*!< Secure access protected erase enable option status bit */ + +/******************* Bits definition for FLASH_WPSN register *********************/ +#define FLASH_WPSN_WRPSN_Pos (0U) +#define FLASH_WPSN_WRPSN_Msk (0xFFFFFFFFUL << FLASH_WPSN_WRPSN_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_WPSN_WRPSN FLASH_WPSN_WRPSN_Msk /*!< Sector write protection option status byte */ + +/******************* Bits definition for FLASH_BOOT_CUR register ****************/ +#define FLASH_BOOT_ADD0_Pos (0U) +#define FLASH_BOOT_ADD0_Msk (0xFFFFUL << FLASH_BOOT_ADD0_Pos) /*!< 0x0000FFFF */ +#define FLASH_BOOT_ADD0 FLASH_BOOT_ADD0_Msk /*!< Arm Cortex-M7 boot address 0 */ +#define FLASH_BOOT_ADD1_Pos (16U) +#define FLASH_BOOT_ADD1_Msk (0xFFFFUL << FLASH_BOOT_ADD1_Pos) /*!< 0xFFFF0000 */ +#define FLASH_BOOT_ADD1 FLASH_BOOT_ADD1_Msk /*!< Arm Cortex-M7 boot address 1 */ + + +/******************* Bits definition for FLASH_CRCCR register ********************/ +#define FLASH_CRCCR_CRC_SECT_Pos (0U) +#define FLASH_CRCCR_CRC_SECT_Msk (0x3FUL << FLASH_CRCCR_CRC_SECT_Pos) /*!< 0x0000003F */ +#define FLASH_CRCCR_CRC_SECT FLASH_CRCCR_CRC_SECT_Msk /*!< CRC sector number */ +#define FLASH_CRCCR_CRC_BY_SECT_Pos (8U) +#define FLASH_CRCCR_CRC_BY_SECT_Msk (0x1UL << FLASH_CRCCR_CRC_BY_SECT_Pos) /*!< 0x00000100 */ +#define FLASH_CRCCR_CRC_BY_SECT FLASH_CRCCR_CRC_BY_SECT_Msk /*!< CRC sector mode select bit */ +#define FLASH_CRCCR_ADD_SECT_Pos (9U) +#define FLASH_CRCCR_ADD_SECT_Msk (0x1UL << FLASH_CRCCR_ADD_SECT_Pos) /*!< 0x00000200 */ +#define FLASH_CRCCR_ADD_SECT FLASH_CRCCR_ADD_SECT_Msk /*!< CRC sector select bit */ +#define FLASH_CRCCR_CLEAN_SECT_Pos (10U) +#define FLASH_CRCCR_CLEAN_SECT_Msk (0x1UL << FLASH_CRCCR_CLEAN_SECT_Pos) /*!< 0x00000400 */ +#define FLASH_CRCCR_CLEAN_SECT FLASH_CRCCR_CLEAN_SECT_Msk /*!< CRC sector list clear bit */ +#define FLASH_CRCCR_START_CRC_Pos (16U) +#define FLASH_CRCCR_START_CRC_Msk (0x1UL << FLASH_CRCCR_START_CRC_Pos) /*!< 0x00010000 */ +#define FLASH_CRCCR_START_CRC FLASH_CRCCR_START_CRC_Msk /*!< CRC start bit */ +#define FLASH_CRCCR_CLEAN_CRC_Pos (17U) +#define FLASH_CRCCR_CLEAN_CRC_Msk (0x1UL << FLASH_CRCCR_CLEAN_CRC_Pos) /*!< 0x00020000 */ +#define FLASH_CRCCR_CLEAN_CRC FLASH_CRCCR_CLEAN_CRC_Msk /*!< CRC clear bit */ +#define FLASH_CRCCR_CRC_BURST_Pos (20U) +#define FLASH_CRCCR_CRC_BURST_Msk (0x3UL << FLASH_CRCCR_CRC_BURST_Pos) /*!< 0x00300000 */ +#define FLASH_CRCCR_CRC_BURST FLASH_CRCCR_CRC_BURST_Msk /*!< CRC burst size */ +#define FLASH_CRCCR_CRC_BURST_0 (0x1UL << FLASH_CRCCR_CRC_BURST_Pos) /*!< 0x00100000 */ +#define FLASH_CRCCR_CRC_BURST_1 (0x2UL << FLASH_CRCCR_CRC_BURST_Pos) /*!< 0x00200000 */ +#define FLASH_CRCCR_ALL_BANK_Pos (22U) +#define FLASH_CRCCR_ALL_BANK_Msk (0x1UL << FLASH_CRCCR_ALL_BANK_Pos) /*!< 0x00400000 */ +#define FLASH_CRCCR_ALL_BANK FLASH_CRCCR_ALL_BANK_Msk /*!< CRC select bit */ + +/******************* Bits definition for FLASH_CRCSADD register ****************/ +#define FLASH_CRCSADD_CRC_START_ADDR_Pos (0U) +#define FLASH_CRCSADD_CRC_START_ADDR_Msk (0xFFFFFFFFUL << FLASH_CRCSADD_CRC_START_ADDR_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_CRCSADD_CRC_START_ADDR FLASH_CRCSADD_CRC_START_ADDR_Msk /*!< CRC start address */ + +/******************* Bits definition for FLASH_CRCEADD register ****************/ +#define FLASH_CRCEADD_CRC_END_ADDR_Pos (0U) +#define FLASH_CRCEADD_CRC_END_ADDR_Msk (0xFFFFFFFFUL << FLASH_CRCEADD_CRC_END_ADDR_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_CRCEADD_CRC_END_ADDR FLASH_CRCEADD_CRC_END_ADDR_Msk /*!< CRC end address */ + +/******************* Bits definition for FLASH_CRCDATA register ***************/ +#define FLASH_CRCDATA_CRC_DATA_Pos (0U) +#define FLASH_CRCDATA_CRC_DATA_Msk (0xFFFFFFFFUL << FLASH_CRCDATA_CRC_DATA_Pos) /*!< 0xFFFFFFFF */ +#define FLASH_CRCDATA_CRC_DATA FLASH_CRCDATA_CRC_DATA_Msk /*!< CRC result */ + +/******************* Bits definition for FLASH_ECC_FA register *******************/ +#define FLASH_ECC_FA_FAIL_ECC_ADDR_Pos (0U) +#define FLASH_ECC_FA_FAIL_ECC_ADDR_Msk (0xFFFFUL << FLASH_ECC_FA_FAIL_ECC_ADDR_Pos) /*!< 0x0000FFFF */ +#define FLASH_ECC_FA_FAIL_ECC_ADDR FLASH_ECC_FA_FAIL_ECC_ADDR_Msk /*!< ECC error address */ +#define FLASH_ECC_FA_OTP_FAIL_ECC_Pos (31U) +#define FLASH_ECC_FA_OTP_FAIL_ECC_Msk (0x1UL << FLASH_ECC_FA_OTP_FAIL_ECC_Pos) /*!< 0x80000000 */ +#define FLASH_ECC_FA_OTP_FAIL_ECC FLASH_ECC_FA_OTP_FAIL_ECC_Msk /*!< OTP ECC error bit */ + +/******************* Bits definition for FLASH_OTPBL register *******************/ +#define FLASH_OTPBL_LOCKBL_Pos (0U) +#define FLASH_OTPBL_LOCKBL_Msk (0xFFFFUL << FLASH_OTPBL_LOCKBL_Pos) /*!< 0x0000FFFF */ +#define FLASH_OTPBL_LOCKBL FLASH_OTPBL_LOCKBL_Msk /*!< OTP Block Lock */ + +/******************************************************************************/ +/* */ +/* Flexible Memory Controller */ +/* */ +/******************************************************************************/ +/****************** Bit definition for FMC_BCR1 register *******************/ +#define FMC_BCR1_CCLKEN_Pos (20U) +#define FMC_BCR1_CCLKEN_Msk (0x1UL << FMC_BCR1_CCLKEN_Pos) /*!< 0x00100000 */ +#define FMC_BCR1_CCLKEN FMC_BCR1_CCLKEN_Msk /*!>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang.h new file mode 100644 index 0000000..e917f35 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang.h @@ -0,0 +1,1444 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang_ltm.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang_ltm.h new file mode 100644 index 0000000..feec324 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_armclang_ltm.h @@ -0,0 +1,1891 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_compiler.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_compiler.h new file mode 100644 index 0000000..adbf296 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_gcc.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_gcc.h new file mode 100644 index 0000000..3ddcc58 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_gcc.h @@ -0,0 +1,2168 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.2.0 + * @date 08. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; iwlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute((used, section(".vectors"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) :: "memory"); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) :: "memory"); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_iccarm.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_iccarm.h new file mode 100644 index 0000000..12d68fd --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_iccarm.h @@ -0,0 +1,964 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.1.0 + * @date 08. May 2019 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc"); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_version.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_version.h new file mode 100644 index 0000000..f2e2746 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.3 + * @date 24. June 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv81mml.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv81mml.h new file mode 100644 index 0000000..8441e57 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv81mml.h @@ -0,0 +1,2968 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 15. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2018-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +#define __ARM_ARCH_8M_MAIN__ 1 // patching for now +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[29U]; + __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ + __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ + __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ +#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ +#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (0x1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mbl.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mbl.h new file mode 100644 index 0000000..344dca5 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mbl.h @@ -0,0 +1,1921 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M ( 2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mml.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mml.h new file mode 100644 index 0000000..5ddb8ae --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_armv8mml.h @@ -0,0 +1,2835 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. September 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0.h new file mode 100644 index 0000000..cafae5a --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = 0x0U; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = 0x0U; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0plus.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0plus.h new file mode 100644 index 0000000..d104965 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm0plus.h @@ -0,0 +1,1085 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t vectors = SCB->VTOR; +#else + uint32_t vectors = 0x0U; +#endif + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm1.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm1.h new file mode 100644 index 0000000..76b4569 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm23.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm23.h new file mode 100644 index 0000000..b79c6af --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm23.h @@ -0,0 +1,1996 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm3.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm3.h new file mode 100644 index 0000000..8157ca7 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm3.h @@ -0,0 +1,1937 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm33.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm33.h new file mode 100644 index 0000000..7fed59a --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm33.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm35p.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm35p.h new file mode 100644 index 0000000..5579c82 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm35p.h @@ -0,0 +1,2910 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED4[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< Core Debug configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< Core Debug Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< Core Debug configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function TZ_SysTick_Config_NS is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm4.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm4.h new file mode 100644 index 0000000..12c023b --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm4.h @@ -0,0 +1,2124 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 13. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm7.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm7.h new file mode 100644 index 0000000..c4515d8 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_cm7.h @@ -0,0 +1,2725 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 28. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## Cache functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc000.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc000.h new file mode 100644 index 0000000..cf92577 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc000.h @@ -0,0 +1,1025 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.6 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc300.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc300.h new file mode 100644 index 0000000..40f3af8 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/core_sc300.h @@ -0,0 +1,1912 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 31. May 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + IO Type Qualifiers are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + (* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)) = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t vectors = (uint32_t )SCB->VTOR; + return (uint32_t)(* (int *) (vectors + ((int32_t)IRQn + NVIC_USER_IRQ_OFFSET) * 4)); +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable __Vendor_SysTickConfig is set to 1, then the + function SysTick_Config is not included. In this case, the file device.h + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv7.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv7.h new file mode 100644 index 0000000..66ef59b --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv7.h @@ -0,0 +1,272 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv8.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv8.h new file mode 100644 index 0000000..0041d4d --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/mpu_armv8.h @@ -0,0 +1,346 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.0 + * @date 08. March 2019 + ******************************************************************************/ +/* + * Copyright (c) 2017-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + (((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + ((BASE & MPU_RBAR_BASE_Msk) | \ + ((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + ((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + ((LIMIT & MPU_RLAR_LIMIT_Msk) | \ + ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/Demo_Project_H7A3/Drivers/CMSIS/Include/tz_context.h b/Demo_Project_H7A3/Drivers/CMSIS/Include/tz_context.h new file mode 100644 index 0000000..0d09749 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/CMSIS/Include/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000..7338082 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,4027 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +#if defined(STM32U5) || defined(STM32H7) || defined(STM32MP1) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#if defined(STM32U5) +#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF +#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF +#endif /* STM32U5 */ +#endif /* STM32U5 || STM32H7 || STM32MP1 */ +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES +#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES +#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 +#endif /* STM32U5 */ + +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif + +#if defined(STM32U5) +#define __HAL_COMP_COMP1_EXTI_CLEAR_RASING_FLAG __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +#if defined(STM32U5) +#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE +#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE +#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#if defined(STM32C0) +#else +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */ +#endif +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32L5) || defined(STM32H7) || defined (STM32U5) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32U5) +#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 +#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#define PAGESIZE FLASH_PAGE_SIZE +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) || defined(STM32C0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ +#if defined(STM32U5) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#define OB_USER_SRAM134_RST OB_USER_SRAM_RST +#define OB_SRAM134_RST_ERASE OB_SRAM_RST_ERASE +#define OB_SRAM134_RST_NOT_ERASE OB_SRAM_RST_NOT_ERASE +#endif /* STM32U5 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ + +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ + +#if defined(STM32L1) +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +#if defined(STM32U5) +#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ +#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP +#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +#if defined(STM32U5) +#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI +#define GTZC_PERIPH_LTDC GTZC_PERIPH_LTDCUSB +#endif /* STM32U5 */ + +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) + +#endif /* STM32F3 */ +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + +#if defined(STM32U5) +#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF +#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#define LPTIM_CHANNEL_ALL 0x00000000U +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) || defined(STM32U5) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP + +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32F7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK +#endif /* STM32F7 */ + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT +#endif /* STM32H7 */ + +#if defined(STM32F7) || defined(STM32H7) +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP +#endif /* STM32F7 || STM32H7 */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP + +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP + +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +#if defined(STM32U5) || defined(STM32MP2) +#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS +#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK +#endif +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) || defined(STM32U5) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + +#if defined(STM32U5) +#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr +#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT +#endif /* STM32U5 */ + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\ + )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ +/** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + +#if defined (STM32U5) +#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP +#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP +#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP +#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP +#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP +#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP +#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP +#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP +#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP +#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP +#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP +#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP +#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP + +#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP +#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP +#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP + +#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP +#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP +#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP +#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP +#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP +#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP +#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP +#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP +#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP +#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP +#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP +#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP +#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP +#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP + +#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP + +#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP +#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP +#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP +#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP +#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP +#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP +#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP +#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP +#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP +#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP +#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP +#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP +#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP +#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP + +#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP +#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP +#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP +#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP +#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP +#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP +#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP +#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP + +#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY +#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY +#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY + +#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN +#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN +#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN +#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN +#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN + +#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK +#endif + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +# endif +# if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +# endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#define RCC_SPI4CLKSOURCE_D2PCLK1 RCC_SPI4CLKSOURCE_D2PCLK2 +#define RCC_SPI5CLKSOURCE_D2PCLK1 RCC_SPI5CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_D2PCLK1 RCC_SPI45CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_CDPCLK1 RCC_SPI45CLKSOURCE_CDPCLK2 +#define RCC_SPI45CLKSOURCE_PCLK1 RCC_SPI45CLKSOURCE_PCLK2 +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) || defined(STM32C0) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 +#if defined(STM32U5) +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE +#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE +#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE +#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE +#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE +#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE +#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE +#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE +#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE +#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT +#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK +#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 +#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 +#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 +#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK +#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE +#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE +#endif /* STM32U5 */ + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx)|| \ + defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || \ + defined (STM32C0) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32F7) +#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE +#endif /* STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h new file mode 100644 index 0000000..ef50a4a --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h @@ -0,0 +1,1185 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_H +#define STM32H7xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_conf.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ +/** @defgroup REV_ID device revision ID + * @{ + */ +#define REV_ID_Y ((uint32_t)0x1003) /*!< STM32H7 rev.Y */ +#define REV_ID_B ((uint32_t)0x2000) /*!< STM32H7 rev.B */ +#define REV_ID_X ((uint32_t)0x2001) /*!< STM32H7 rev.X */ +#define REV_ID_V ((uint32_t)0x2003) /*!< STM32H7 rev.V */ + +/** + * @} + */ + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_VREFBUF_VoltageScale VREFBUF Voltage Scale + * @{ + */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 VREFBUF_CSR_VRS_OUT1 /*!< Voltage reference scale 0 (VREF_OUT1) */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS_OUT2 /*!< Voltage reference scale 1 (VREF_OUT2) */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE2 VREFBUF_CSR_VRS_OUT3 /*!< Voltage reference scale 2 (VREF_OUT3) */ +#define SYSCFG_VREFBUF_VOLTAGE_SCALE3 VREFBUF_CSR_VRS_OUT4 /*!< Voltage reference scale 3 (VREF_OUT4) */ + + +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(__SCALE__) (((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE0) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE1) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE2) || \ + ((__SCALE__) == SYSCFG_VREFBUF_VOLTAGE_SCALE3)) + + +/** + * @} + */ + +/** @defgroup SYSCFG_VREFBUF_HighImpedance VREFBUF High Impedance + * @{ + */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE ((uint32_t)0x00000000) /*!< VREF_plus pin is internally connected to Voltage reference buffer output */ +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_CSR_HIZ /*!< VREF_plus pin is high impedance */ + +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(__VALUE__) (((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE) || \ + ((__VALUE__) == SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE)) + +#define IS_SYSCFG_VREFBUF_TRIMMING(__VALUE__) (((__VALUE__) > 0UL) && ((__VALUE__) <= VREFBUF_CCR_TRIM)) + +/** + * @} + */ + +#if !defined(SYSCFG_PMCR_BOOSTEN) +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast-mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast-mode Plus on PB8 */ +#define SYSCFG_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast-mode Plus on PB9 */ + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB8) == SYSCFG_FASTMODEPLUS_PB8) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB9) == SYSCFG_FASTMODEPLUS_PB9)) + +/** + * @} + */ +#endif /* ! SYSCFG_PMCR_BOOSTEN */ + + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) || defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +/** @defgroup SYSCFG_Adc2_Alternate_Connection SYSCFG ADC2 Alternate Connection + * @{ + */ + +/** @brief Adc2 Alternate Connection on Vinp[16] and Vinp[17] + */ +#define SYSCFG_ADC2_ROUT0_DAC1_1 ((uint32_t)0x00000000) /*!< DAC1_out1 connected to ADC2 VINP[16] */ +#define SYSCFG_ADC2_ROUT0_VBAT4 SYSCFG_ADC2ALT_ADC2_ROUT0 /*!< VBAT/4 connected to ADC2 VINP[16] */ +#define SYSCFG_ADC2_ROUT1_DAC1_2 ((uint32_t)0x00000000) /*!< DAC1_out2 connected to ADC2 VINP[17] */ +#define SYSCFG_ADC2_ROUT1_VREFINT SYSCFG_ADC2ALT_ADC2_ROUT1 /*!< VREFINT connected to ADC2 VINP[17] */ + +#define IS_SYSCFG_ADC2ALT_ROUT0(__VALUE__) (((__VALUE__) == SYSCFG_ADC2_ROUT0_DAC1_1) || \ + ((__VALUE__) == SYSCFG_ADC2_ROUT0_VBAT4)) +#define IS_SYSCFG_ADC2ALT_ROUT1(__VALUE__) (((__VALUE__) == SYSCFG_ADC2_ROUT1_DAC1_2) || \ + ((__VALUE__) == SYSCFG_ADC2_ROUT1_VREFINT)) + +/** + * @} + */ +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0 || SYSCFG_ADC2ALT_ADC2_ROUT1*/ + + +/** @defgroup SYSCFG_Ethernet_Config Ethernet Config + * @{ + */ +#define SYSCFG_ETH_MII ((uint32_t)0x00000000) /*!< Select the Media Independent Interface */ +#define SYSCFG_ETH_RMII SYSCFG_PMCR_EPIS_SEL_2 /*!< Select the Reduced Media Independent Interface */ + +#define IS_SYSCFG_ETHERNET_CONFIG(CONFIG) (((CONFIG) == SYSCFG_ETH_MII) || \ + ((CONFIG) == SYSCFG_ETH_RMII)) + +/** + * @} + */ + + +/** @defgroup SYSCFG_Analog_Switch_Config Analog Switch Config + * @{ + */ +#define SYSCFG_SWITCH_PA0 SYSCFG_PMCR_PA0SO /*!< Select PA0 analog switch */ +#define SYSCFG_SWITCH_PA1 SYSCFG_PMCR_PA1SO /*!< Select PA1 analog switch */ +#define SYSCFG_SWITCH_PC2 SYSCFG_PMCR_PC2SO /*!< Select PC2 analog switch */ +#define SYSCFG_SWITCH_PC3 SYSCFG_PMCR_PC3SO /*!< Select PC3 analog switch */ + + + + +#define SYSCFG_SWITCH_PA0_OPEN SYSCFG_PMCR_PA0SO /*!< PA0 analog switch opened */ +#define SYSCFG_SWITCH_PA0_CLOSE ((uint32_t)0x00000000) /*!< PA0 analog switch closed */ +#define SYSCFG_SWITCH_PA1_OPEN SYSCFG_PMCR_PA1SO /*!< PA1 analog switch opened */ +#define SYSCFG_SWITCH_PA1_CLOSE ((uint32_t)0x00000000) /*!< PA1 analog switch closed*/ +#define SYSCFG_SWITCH_PC2_OPEN SYSCFG_PMCR_PC2SO /*!< PC2 analog switch opened */ +#define SYSCFG_SWITCH_PC2_CLOSE ((uint32_t)0x00000000) /*!< PC2 analog switch closed */ +#define SYSCFG_SWITCH_PC3_OPEN SYSCFG_PMCR_PC3SO /*!< PC3 analog switch opened */ +#define SYSCFG_SWITCH_PC3_CLOSE ((uint32_t)0x00000000) /*!< PC3 analog switch closed */ + +/** + * @} + */ + +#define IS_SYSCFG_ANALOG_SWITCH(SWITCH) ((((SWITCH) & SYSCFG_SWITCH_PA0) == SYSCFG_SWITCH_PA0)|| \ + (((SWITCH) & SYSCFG_SWITCH_PA1) == SYSCFG_SWITCH_PA1) || \ + (((SWITCH) & SYSCFG_SWITCH_PC2) == SYSCFG_SWITCH_PC2) || \ + (((SWITCH) & SYSCFG_SWITCH_PC3) == SYSCFG_SWITCH_PC3)) + + +#define IS_SYSCFG_SWITCH_STATE(STATE) ((((STATE) & SYSCFG_SWITCH_PA0_OPEN) == SYSCFG_SWITCH_PA0_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PA0_CLOSE) == SYSCFG_SWITCH_PA0_CLOSE) || \ + (((STATE) & SYSCFG_SWITCH_PA1_OPEN) == SYSCFG_SWITCH_PA1_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PA1_CLOSE) == SYSCFG_SWITCH_PA1_CLOSE) || \ + (((STATE) & SYSCFG_SWITCH_PC2_OPEN) == SYSCFG_SWITCH_PC2_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PC2_CLOSE) == SYSCFG_SWITCH_PC2_CLOSE) || \ + (((STATE) & SYSCFG_SWITCH_PC3_OPEN) == SYSCFG_SWITCH_PC3_OPEN) || \ + (((STATE) & SYSCFG_SWITCH_PC3_CLOSE) == SYSCFG_SWITCH_PC3_CLOSE)) + + +/** @defgroup SYSCFG_Boot_Config Boot Config + * @{ + */ +#define SYSCFG_BOOT_ADDR0 ((uint32_t)0x00000000) /*!< Select Boot address0 */ +#define SYSCFG_BOOT_ADDR1 ((uint32_t)0x00000001) /*!< Select Boot address1 */ + +#define IS_SYSCFG_BOOT_REGISTER(REGISTER) (((REGISTER) == SYSCFG_BOOT_ADDR0)|| \ + ((REGISTER) == SYSCFG_BOOT_ADDR1)) + +#define IS_SYSCFG_BOOT_ADDRESS(ADDRESS) ((ADDRESS) < PERIPH_BASE) + +/** + * @} + */ + + +/** @defgroup SYSCFG_IOCompenstionCell_Config IOCompenstionCell Config + * @{ + */ +#define SYSCFG_CELL_CODE ((uint32_t)0x00000000) /*!< Select Code from the cell */ +#define SYSCFG_REGISTER_CODE SYSCFG_CCCSR_CS /*!< Code from the SYSCFG compensation cell code register */ + +#define IS_SYSCFG_CODE_SELECT(SELECT) (((SELECT) == SYSCFG_CELL_CODE)|| \ + ((SELECT) == SYSCFG_REGISTER_CODE)) + +#define IS_SYSCFG_CODE_CONFIG(CONFIG) ((CONFIG) < (0x10UL)) + +/** + * @} + */ + +/** + * @} + */ + + +/** @defgroup EXTI_Event_Input_Config Event Input Config + * @{ + */ + +#define EXTI_MODE_IT ((uint32_t)0x00010000) +#define EXTI_MODE_EVT ((uint32_t)0x00020000) +#define EXTI_RISING_EDGE ((uint32_t)0x00100000) +#define EXTI_FALLING_EDGE ((uint32_t)0x00200000) + +#define IS_EXTI_EDGE_LINE(EDGE) (((EDGE) == EXTI_RISING_EDGE) || ((EDGE) == EXTI_FALLING_EDGE)) +#define IS_EXTI_MODE_LINE(MODE) (((MODE) == EXTI_MODE_IT) || ((MODE) == EXTI_MODE_EVT)) + +#define EXTI_LINE0 ((uint32_t)0x00) /*!< External interrupt LINE 0 */ +#define EXTI_LINE1 ((uint32_t)0x01) /*!< External interrupt LINE 1 */ +#define EXTI_LINE2 ((uint32_t)0x02) /*!< External interrupt LINE 2 */ +#define EXTI_LINE3 ((uint32_t)0x03) /*!< External interrupt LINE 3 */ +#define EXTI_LINE4 ((uint32_t)0x04) /*!< External interrupt LINE 4 */ +#define EXTI_LINE5 ((uint32_t)0x05) /*!< External interrupt LINE 5 */ +#define EXTI_LINE6 ((uint32_t)0x06) /*!< External interrupt LINE 6 */ +#define EXTI_LINE7 ((uint32_t)0x07) /*!< External interrupt LINE 7 */ +#define EXTI_LINE8 ((uint32_t)0x08) /*!< External interrupt LINE 8 */ +#define EXTI_LINE9 ((uint32_t)0x09) /*!< External interrupt LINE 9 */ +#define EXTI_LINE10 ((uint32_t)0x0A) /*!< External interrupt LINE 10 */ +#define EXTI_LINE11 ((uint32_t)0x0B) /*!< External interrupt LINE 11 */ +#define EXTI_LINE12 ((uint32_t)0x0C) /*!< External interrupt LINE 12 */ +#define EXTI_LINE13 ((uint32_t)0x0D) /*!< External interrupt LINE 13 */ +#define EXTI_LINE14 ((uint32_t)0x0E) /*!< External interrupt LINE 14 */ +#define EXTI_LINE15 ((uint32_t)0x0F) /*!< External interrupt LINE 15 */ +#define EXTI_LINE16 ((uint32_t)0x10) +#define EXTI_LINE17 ((uint32_t)0x11) +#define EXTI_LINE18 ((uint32_t)0x12) +#define EXTI_LINE19 ((uint32_t)0x13) +#define EXTI_LINE20 ((uint32_t)0x14) +#define EXTI_LINE21 ((uint32_t)0x15) +#define EXTI_LINE22 ((uint32_t)0x16) +#define EXTI_LINE23 ((uint32_t)0x17) +#define EXTI_LINE24 ((uint32_t)0x18) +#define EXTI_LINE25 ((uint32_t)0x19) +#define EXTI_LINE26 ((uint32_t)0x1A) +#define EXTI_LINE27 ((uint32_t)0x1B) +#define EXTI_LINE28 ((uint32_t)0x1C) +#define EXTI_LINE29 ((uint32_t)0x1D) +#define EXTI_LINE30 ((uint32_t)0x1E) +#define EXTI_LINE31 ((uint32_t)0x1F) +#define EXTI_LINE32 ((uint32_t)0x20) +#define EXTI_LINE33 ((uint32_t)0x21) +#define EXTI_LINE34 ((uint32_t)0x22) +#define EXTI_LINE35 ((uint32_t)0x23) +#define EXTI_LINE36 ((uint32_t)0x24) +#define EXTI_LINE37 ((uint32_t)0x25) +#define EXTI_LINE38 ((uint32_t)0x26) +#define EXTI_LINE39 ((uint32_t)0x27) + +#define EXTI_LINE40 ((uint32_t)0x28) +#define EXTI_LINE41 ((uint32_t)0x29) +#define EXTI_LINE42 ((uint32_t)0x2A) +#define EXTI_LINE43 ((uint32_t)0x2B) +#define EXTI_LINE44 ((uint32_t)0x2C) /* Not available in all family lines */ +/* EXTI_LINE45 Reserved */ +#if defined(DUAL_CORE) +#define EXTI_LINE46 ((uint32_t)0x2E) +#else +/* EXTI_LINE46 Reserved */ +#endif /* DUAL_CORE */ +#define EXTI_LINE47 ((uint32_t)0x2F) +#define EXTI_LINE48 ((uint32_t)0x30) +#define EXTI_LINE49 ((uint32_t)0x31) +#define EXTI_LINE50 ((uint32_t)0x32) +#define EXTI_LINE51 ((uint32_t)0x33) +#define EXTI_LINE52 ((uint32_t)0x34) +#define EXTI_LINE53 ((uint32_t)0x35) +#define EXTI_LINE54 ((uint32_t)0x36) +#define EXTI_LINE55 ((uint32_t)0x37) +#define EXTI_LINE56 ((uint32_t)0x38) +#define EXTI_LINE57 ((uint32_t)0x39) +#define EXTI_LINE58 ((uint32_t)0x3A) +#define EXTI_LINE59 ((uint32_t)0x3B) +#define EXTI_LINE60 ((uint32_t)0x3C) +#define EXTI_LINE61 ((uint32_t)0x3D) +#define EXTI_LINE62 ((uint32_t)0x3E) +#define EXTI_LINE63 ((uint32_t)0x3F) +#define EXTI_LINE64 ((uint32_t)0x40) +#define EXTI_LINE65 ((uint32_t)0x41) +#define EXTI_LINE66 ((uint32_t)0x42) +#define EXTI_LINE67 ((uint32_t)0x43) +#define EXTI_LINE68 ((uint32_t)0x44) +#define EXTI_LINE69 ((uint32_t)0x45) +#define EXTI_LINE70 ((uint32_t)0x46) +#define EXTI_LINE71 ((uint32_t)0x47) +#define EXTI_LINE72 ((uint32_t)0x48) +#define EXTI_LINE73 ((uint32_t)0x49) +#define EXTI_LINE74 ((uint32_t)0x4A) +#define EXTI_LINE75 ((uint32_t)0x4B) /* Not available in all family lines */ +#define EXTI_LINE76 ((uint32_t)0x4C) /* Not available in all family lines */ +#if defined(DUAL_CORE) +#define EXTI_LINE77 ((uint32_t)0x4D) +#define EXTI_LINE78 ((uint32_t)0x4E) +#define EXTI_LINE79 ((uint32_t)0x4F) +#define EXTI_LINE80 ((uint32_t)0x50) +#else +/* EXTI_LINE77 Reserved */ +/* EXTI_LINE78 Reserved */ +/* EXTI_LINE79 Reserved */ +/* EXTI_LINE80 Reserved */ +#endif /* DUAL_CORE */ +/* EXTI_LINE81 Reserved */ +#if defined(DUAL_CORE) +#define EXTI_LINE82 ((uint32_t)0x52) +#else +/* EXTI_LINE82 Reserved */ +#endif /* DUAL_CORE */ +/* EXTI_LINE83 Reserved */ +#if defined(DUAL_CORE) +#define EXTI_LINE84 ((uint32_t)0x54) +#else +/* EXTI_LINE84 Reserved */ +#endif /* DUAL_CORE */ +#define EXTI_LINE85 ((uint32_t)0x55) +#define EXTI_LINE86 ((uint32_t)0x56) /* Not available in all family lines */ +#define EXTI_LINE87 ((uint32_t)0x57) +#define EXTI_LINE88 ((uint32_t)0x58) /* Not available in all family lines */ +#define EXTI_LINE89 ((uint32_t)0x59) /* Not available in all family lines */ +#define EXTI_LINE90 ((uint32_t)0x5A) /* Not available in all family lines */ +#define EXTI_LINE91 ((uint32_t)0x5B) /* Not available in all family lines */ + +#if defined(DUAL_CORE) +#define IS_HAL_EXTI_CONFIG_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE51) || \ + ((LINE) == EXTI_LINE82) || ((LINE) == EXTI_LINE84) || \ + ((LINE) == EXTI_LINE85) || ((LINE) == EXTI_LINE86)) +#else +#define IS_HAL_EXTI_CONFIG_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1)|| \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE51) || \ + ((LINE) == EXTI_LINE85) || ((LINE) == EXTI_LINE86)) +#endif /* DUAL_CORE */ + +#if defined(DUAL_CORE) +#define IS_EXTI_ALL_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || ((LINE) == EXTI_LINE46) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE77) || ((LINE) == EXTI_LINE79) || \ + ((LINE) == EXTI_LINE84) || ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87) || \ + ((LINE) == EXTI_LINE78) || \ + ((LINE) == EXTI_LINE80) || ((LINE) == EXTI_LINE82)) +#else +#define IS_EXTI_ALL_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87) || \ + ((LINE) == EXTI_LINE88) || ((LINE) == EXTI_LINE89) || \ + ((LINE) == EXTI_LINE90) || ((LINE) == EXTI_LINE91)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_EXTI_D1_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || ((LINE) == EXTI_LINE46) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE77) || ((LINE) == EXTI_LINE79) || \ + ((LINE) == EXTI_LINE84) || ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87)) +#else +#define IS_EXTI_D1_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87) || \ + ((LINE) == EXTI_LINE88) || ((LINE) == EXTI_LINE89) || \ + ((LINE) == EXTI_LINE90) || ((LINE) == EXTI_LINE91)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_EXTI_D2_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE16) || ((LINE) == EXTI_LINE17) || \ + ((LINE) == EXTI_LINE18) || ((LINE) == EXTI_LINE19) || \ + ((LINE) == EXTI_LINE20) || ((LINE) == EXTI_LINE21) || \ + ((LINE) == EXTI_LINE22) || ((LINE) == EXTI_LINE23) || \ + ((LINE) == EXTI_LINE24) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE26) || ((LINE) == EXTI_LINE27) || \ + ((LINE) == EXTI_LINE28) || ((LINE) == EXTI_LINE29) || \ + ((LINE) == EXTI_LINE30) || ((LINE) == EXTI_LINE31) || \ + ((LINE) == EXTI_LINE32) || ((LINE) == EXTI_LINE33) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE36) || ((LINE) == EXTI_LINE37) || \ + ((LINE) == EXTI_LINE38) || ((LINE) == EXTI_LINE39) || \ + ((LINE) == EXTI_LINE40) || ((LINE) == EXTI_LINE41) || \ + ((LINE) == EXTI_LINE42) || ((LINE) == EXTI_LINE43) || \ + ((LINE) == EXTI_LINE44) || ((LINE) == EXTI_LINE46) || \ + ((LINE) == EXTI_LINE47) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE54) || \ + ((LINE) == EXTI_LINE55) || ((LINE) == EXTI_LINE56) || \ + ((LINE) == EXTI_LINE57) || ((LINE) == EXTI_LINE58) || \ + ((LINE) == EXTI_LINE59) || ((LINE) == EXTI_LINE60) || \ + ((LINE) == EXTI_LINE61) || ((LINE) == EXTI_LINE62) || \ + ((LINE) == EXTI_LINE63) || ((LINE) == EXTI_LINE64) || \ + ((LINE) == EXTI_LINE65) || ((LINE) == EXTI_LINE66) || \ + ((LINE) == EXTI_LINE67) || ((LINE) == EXTI_LINE68) || \ + ((LINE) == EXTI_LINE69) || ((LINE) == EXTI_LINE70) || \ + ((LINE) == EXTI_LINE71) || ((LINE) == EXTI_LINE72) || \ + ((LINE) == EXTI_LINE73) || ((LINE) == EXTI_LINE74) || \ + ((LINE) == EXTI_LINE75) || ((LINE) == EXTI_LINE76) || \ + ((LINE) == EXTI_LINE78) || ((LINE) == EXTI_LINE80) || \ + ((LINE) == EXTI_LINE82) || ((LINE) == EXTI_LINE85) || \ + ((LINE) == EXTI_LINE86) || ((LINE) == EXTI_LINE87)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_EXTI_D3_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE19) || ((LINE) == EXTI_LINE20) || \ + ((LINE) == EXTI_LINE21) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE41) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53)) +#elif (POWER_DOMAINS_NUMBER == 3U) +#define IS_EXTI_D3_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE19) || ((LINE) == EXTI_LINE20) || \ + ((LINE) == EXTI_LINE21) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE41) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE52) || \ + ((LINE) == EXTI_LINE53) || ((LINE) == EXTI_LINE88)) +#else +#define IS_EXTI_D3_LINE(LINE) (((LINE) == EXTI_LINE0) || ((LINE) == EXTI_LINE1) || \ + ((LINE) == EXTI_LINE2) || ((LINE) == EXTI_LINE3) || \ + ((LINE) == EXTI_LINE4) || ((LINE) == EXTI_LINE5) || \ + ((LINE) == EXTI_LINE6) || ((LINE) == EXTI_LINE7) || \ + ((LINE) == EXTI_LINE8) || ((LINE) == EXTI_LINE9) || \ + ((LINE) == EXTI_LINE10) || ((LINE) == EXTI_LINE11) || \ + ((LINE) == EXTI_LINE12) || ((LINE) == EXTI_LINE13) || \ + ((LINE) == EXTI_LINE14) || ((LINE) == EXTI_LINE15) || \ + ((LINE) == EXTI_LINE19) || ((LINE) == EXTI_LINE20) || \ + ((LINE) == EXTI_LINE21) || ((LINE) == EXTI_LINE25) || \ + ((LINE) == EXTI_LINE34) || ((LINE) == EXTI_LINE35) || \ + ((LINE) == EXTI_LINE41) || ((LINE) == EXTI_LINE48) || \ + ((LINE) == EXTI_LINE49) || ((LINE) == EXTI_LINE50) || \ + ((LINE) == EXTI_LINE51) || ((LINE) == EXTI_LINE88)) +#endif /*DUAL_CORE*/ + + +#define BDMA_CH6_CLEAR ((uint32_t)0x00000000) /*!< BDMA ch6 event selected as D3 domain pendclear source*/ +#define BDMA_CH7_CLEAR ((uint32_t)0x00000001) /*!< BDMA ch7 event selected as D3 domain pendclear source*/ +#if defined (LPTIM4) +#define LPTIM4_OUT_CLEAR ((uint32_t)0x00000002) /*!< LPTIM4 out selected as D3 domain pendclear source*/ +#else +#define LPTIM2_OUT_CLEAR ((uint32_t)0x00000002) /*!< LPTIM2 out selected as D3 domain pendclear source*/ +#endif /* LPTIM4 */ +#if defined (LPTIM5) +#define LPTIM5_OUT_CLEAR ((uint32_t)0x00000003) /*!< LPTIM5 out selected as D3 domain pendclear source*/ +#else +#define LPTIM3_OUT_CLEAR ((uint32_t)0x00000003) /*!< LPTIM3 out selected as D3 domain pendclear source*/ +#endif /* LPTIM5 */ +#if defined (LPTIM4) && defined (LPTIM5) +#define IS_EXTI_D3_CLEAR(SOURCE) (((SOURCE) == BDMA_CH6_CLEAR) || ((SOURCE) == BDMA_CH7_CLEAR) || \ + ((SOURCE) == LPTIM4_OUT_CLEAR) || ((SOURCE) == LPTIM5_OUT_CLEAR)) +#else +#define IS_EXTI_D3_CLEAR(SOURCE) (((SOURCE) == BDMA_CH6_CLEAR) || ((SOURCE) == BDMA_CH7_CLEAR) || \ + ((SOURCE) == LPTIM2_OUT_CLEAR) || ((SOURCE) == LPTIM3_OUT_CLEAR)) +#endif /* LPTIM4 LPTIM5 */ +/** + * @} + */ + + +/** @defgroup FMC_SwapBankMapping_Config SwapBankMapping Config + * @{ + */ +#define FMC_SWAPBMAP_DISABLE (0x00000000U) +#define FMC_SWAPBMAP_SDRAM_SRAM FMC_BCR1_BMAP_0 +#define FMC_SWAPBMAP_SDRAMB2 FMC_BCR1_BMAP_1 + +#define IS_FMC_SWAPBMAP_MODE(__MODE__) (((__MODE__) == FMC_SWAPBMAP_DISABLE) || \ + ((__MODE__) == FMC_SWAPBMAP_SDRAM_SRAM) || \ + ((__MODE__) == FMC_SWAPBMAP_SDRAMB2)) +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ +#if defined(DUAL_CORE) +/** @defgroup ART_Exported_Macros ART Exported Macros + * @{ + */ + +/** @brief ART Enable Macro. + * Enable the Cortex-M4 ART cache. + */ +#define __HAL_ART_ENABLE() SET_BIT(ART->CTR, ART_CTR_EN) + +/** @brief ART Disable Macro. + * Disable the Cortex-M4 ART cache. + */ +#define __HAL_ART_DISABLE() CLEAR_BIT(ART->CTR, ART_CTR_EN) + +/** @brief ART Cache BaseAddress Config. + * Configure the Cortex-M4 ART cache Base Address. + */ +#define __HAL_ART_CONFIG_BASE_ADDRESS(__BASE_ADDRESS__) MODIFY_REG(ART->CTR, ART_CTR_PCACHEADDR, (((__BASE_ADDRESS__) >> 12U) & 0x000FFF00UL)) + +/** + * @} + */ +#endif /* DUAL_CORE */ + +/** @defgroup SYSCFG_Exported_Macros SYSCFG Exported Macros + * @{ + */ + +/** @brief SYSCFG Break AXIRAM double ECC lock. + * Enable and lock the connection of AXIRAM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_AXISRAM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML) + +/** @brief SYSCFG Break ITCM double ECC lock. + * Enable and lock the connection of ITCM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_ITCM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_ITCML) + +/** @brief SYSCFG Break DTCM double ECC lock. + * Enable and lock the connection of DTCM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_DTCM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_DTCML) + +/** @brief SYSCFG Break SRAM1 double ECC lock. + * Enable and lock the connection of SRAM1 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM1_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM1L) + +/** @brief SYSCFG Break SRAM2 double ECC lock. + * Enable and lock the connection of SRAM2 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM2_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM2L) + +/** @brief SYSCFG Break SRAM3 double ECC lock. + * Enable and lock the connection of SRAM3 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM3_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM3L) + +/** @brief SYSCFG Break SRAM4 double ECC lock. + * Enable and lock the connection of SRAM4 double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_SRAM4_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_SRAM4L) + +/** @brief SYSCFG Break Backup SRAM double ECC lock. + * Enable and lock the connection of Backup SRAM double ECC error to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_BKRAM_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_BKRAML) + +/** @brief SYSCFG Break Cortex-M7 Lockup lock. + * Enable and lock the connection of Cortex-M7 LOCKUP output to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_CM7_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_CM7L) + +/** @brief SYSCFG Break FLASH double ECC lock. + * Enable and lock the connection of Flash double ECC error connection to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_FLASH_DBL_ECC_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_FLASHL) + +/** @brief SYSCFG Break PVD lock. + * Enable and lock the PVD connection to Timer1/8/15/16/17 and HRTIMER Break input, as well as the PVDE and PLS[2:0] in the PWR_CR1 register. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_PVD_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_PVDL) + +#if defined(DUAL_CORE) +/** @brief SYSCFG Break Cortex-M4 Lockup lock. + * Enable and lock the connection of Cortex-M4 LOCKUP output to TIM1/8/15/16/17 and HRTIMER Break input. + * @note The selected configuration is locked and can be unlocked only by system reset. + This feature is available on STM32H7 rev.B and above. + */ +#define __HAL_SYSCFG_BREAK_CM4_LOCKUP_LOCK() SET_BIT(SYSCFG->CFGR, SYSCFG_CFGR_CM4L) +#endif /* DUAL_CORE */ + +#if !defined(SYSCFG_PMCR_BOOSTEN) +/** @brief Fast-mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of : + * @arg @ref SYSCFG_FASTMODEPLUS_PB6 Fast-mode Plus driving capability activation on PB6 + * @arg @ref SYSCFG_FASTMODEPLUS_PB7 Fast-mode Plus driving capability activation on PB7 + * @arg @ref SYSCFG_FASTMODEPLUS_PB8 Fast-mode Plus driving capability activation on PB8 + * @arg @ref SYSCFG_FASTMODEPLUS_PB9 Fast-mode Plus driving capability activation on PB9 + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + SET_BIT(SYSCFG->PMCR, (__FASTMODEPLUS__));\ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__)));\ + CLEAR_BIT(SYSCFG->PMCR, (__FASTMODEPLUS__));\ + }while(0) + +#endif /* !SYSCFG_PMCR_BOOSTEN */ +/** + * @} + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#define __HAL_DBGMCU_FREEZE_WWDG1() (DBGMCU->APB3FZ1 |= (DBGMCU_APB3FZ1_DBG_WWDG1)) + +#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM2)) +#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM3)) +#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM4)) +#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM5)) +#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM6)) +#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM7)) +#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM12)) +#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM13)) +#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_TIM14)) +#define __HAL_DBGMCU_FREEZE_LPTIM1() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_LPTIM1)) +#define __HAL_DBGMCU_FREEZE_I2C1() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C1)) +#define __HAL_DBGMCU_FREEZE_I2C2() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C2)) +#define __HAL_DBGMCU_FREEZE_I2C3() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C3)) +#if defined(I2C5) +#define __HAL_DBGMCU_FREEZE_I2C5() (DBGMCU->APB1LFZ1 |= (DBGMCU_APB1LFZ1_DBG_I2C5)) +#endif /*I2C5*/ +#if defined(DBGMCU_APB1HFZ1_DBG_FDCAN) +#define __HAL_DBGMCU_FREEZE_FDCAN() (DBGMCU->APB1HFZ1 |= (DBGMCU_APB1HFZ1_DBG_FDCAN)) +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ + +#if defined(TIM23) +#define __HAL_DBGMCU_FREEZE_TIM23() (DBGMCU->APB1HFZ1 |= (DBGMCU_APB1HFZ1_DBG_TIM23)) +#endif /*TIM23*/ +#if defined(TIM24) +#define __HAL_DBGMCU_FREEZE_TIM24() (DBGMCU->APB1HFZ1 |= (DBGMCU_APB1HFZ1_DBG_TIM24)) +#endif /*TIM24*/ + +#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM1)) +#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM8)) +#define __HAL_DBGMCU_FREEZE_TIM15() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM15)) +#define __HAL_DBGMCU_FREEZE_TIM16() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM16)) +#define __HAL_DBGMCU_FREEZE_TIM17() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_TIM17)) +#define __HAL_DBGMCU_FREEZE_HRTIM() (DBGMCU->APB2FZ1 |= (DBGMCU_APB2FZ1_DBG_HRTIM)) + +#define __HAL_DBGMCU_FREEZE_I2C4() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_I2C4)) +#define __HAL_DBGMCU_FREEZE_LPTIM2() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM2)) +#define __HAL_DBGMCU_FREEZE_LPTIM3() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM3)) +#define __HAL_DBGMCU_FREEZE_LPTIM4() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM4)) +#define __HAL_DBGMCU_FREEZE_LPTIM5() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_LPTIM5)) +#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_RTC)) +#define __HAL_DBGMCU_FREEZE_IWDG1() (DBGMCU->APB4FZ1 |= (DBGMCU_APB4FZ1_DBG_IWDG1)) + + +#define __HAL_DBGMCU_UnFreeze_WWDG1() (DBGMCU->APB3FZ1 &= ~ (DBGMCU_APB3FZ1_DBG_WWDG1)) + +#define __HAL_DBGMCU_UnFreeze_TIM2() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM2)) +#define __HAL_DBGMCU_UnFreeze_TIM3() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM3)) +#define __HAL_DBGMCU_UnFreeze_TIM4() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM4)) +#define __HAL_DBGMCU_UnFreeze_TIM5() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM5)) +#define __HAL_DBGMCU_UnFreeze_TIM6() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM6)) +#define __HAL_DBGMCU_UnFreeze_TIM7() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM7)) +#define __HAL_DBGMCU_UnFreeze_TIM12() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM12)) +#define __HAL_DBGMCU_UnFreeze_TIM13() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM13)) +#define __HAL_DBGMCU_UnFreeze_TIM14() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_TIM14)) +#define __HAL_DBGMCU_UnFreeze_LPTIM1() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_LPTIM1)) +#define __HAL_DBGMCU_UnFreeze_I2C1() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C1)) +#define __HAL_DBGMCU_UnFreeze_I2C2() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C2)) +#define __HAL_DBGMCU_UnFreeze_I2C3() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C3)) +#if defined(I2C5) +#define __HAL_DBGMCU_UnFreeze_I2C5() (DBGMCU->APB1LFZ1 &= ~ (DBGMCU_APB1LFZ1_DBG_I2C5)) +#endif /*I2C5*/ +#if defined(DBGMCU_APB1HFZ1_DBG_FDCAN) +#define __HAL_DBGMCU_UnFreeze_FDCAN() (DBGMCU->APB1HFZ1 &= ~ (DBGMCU_APB1HFZ1_DBG_FDCAN)) +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ + +#if defined(TIM23) +#define __HAL_DBGMCU_UnFreeze_TIM23() (DBGMCU->APB1HFZ1 &= ~ (DBGMCU_APB1HFZ1_DBG_TIM23)) +#endif /*TIM23*/ +#if defined(TIM24) +#define __HAL_DBGMCU_UnFreeze_TIM24() (DBGMCU->APB1HFZ1 &= ~ (DBGMCU_APB1HFZ1_DBG_TIM24)) +#endif /*TIM24*/ + +#define __HAL_DBGMCU_UnFreeze_TIM1() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM1)) +#define __HAL_DBGMCU_UnFreeze_TIM8() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM8)) +#define __HAL_DBGMCU_UnFreeze_TIM15() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM15)) +#define __HAL_DBGMCU_UnFreeze_TIM16() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM16)) +#define __HAL_DBGMCU_UnFreeze_TIM17() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_TIM17)) +#define __HAL_DBGMCU_UnFreeze_HRTIM() (DBGMCU->APB2FZ1 &= ~ (DBGMCU_APB2FZ1_DBG_HRTIM)) + +#define __HAL_DBGMCU_UnFreeze_I2C4() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_I2C4)) +#define __HAL_DBGMCU_UnFreeze_LPTIM2() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM2)) +#define __HAL_DBGMCU_UnFreeze_LPTIM3() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM3)) +#define __HAL_DBGMCU_UnFreeze_LPTIM4() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM4)) +#define __HAL_DBGMCU_UnFreeze_LPTIM5() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_LPTIM5)) +#define __HAL_DBGMCU_UnFreeze_RTC() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_RTC)) +#define __HAL_DBGMCU_UnFreeze_IWDG1() (DBGMCU->APB4FZ1 &= ~ (DBGMCU_APB4FZ1_DBG_IWDG1)) + + +#if defined(DUAL_CORE) +#define __HAL_DBGMCU_FREEZE2_IWDG2() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_IWDG2)) +#define __HAL_DBGMCU_FREEZE2_WWDG2() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_WWDG2)) + +#define __HAL_DBGMCU_UnFreeze2_IWDG2() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_IWDG2)) +#define __HAL_DBGMCU_UnFreeze2_WWDG2() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_WWDG2)) + + +#define __HAL_DBGMCU_FREEZE2_WWDG1() (DBGMCU->APB3FZ2 |= (DBGMCU_APB3FZ2_DBG_WWDG1)) + +#define __HAL_DBGMCU_FREEZE2_TIM2() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM2)) +#define __HAL_DBGMCU_FREEZE2_TIM3() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM3)) +#define __HAL_DBGMCU_FREEZE2_TIM4() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM4)) +#define __HAL_DBGMCU_FREEZE2_TIM5() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM5)) +#define __HAL_DBGMCU_FREEZE2_TIM6() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM6)) +#define __HAL_DBGMCU_FREEZE2_TIM7() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM7)) +#define __HAL_DBGMCU_FREEZE2_TIM12() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM12)) +#define __HAL_DBGMCU_FREEZE2_TIM13() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM13)) +#define __HAL_DBGMCU_FREEZE2_TIM14() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_TIM14)) +#define __HAL_DBGMCU_FREEZE2_LPTIM1() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_LPTIM1)) +#define __HAL_DBGMCU_FREEZE2_I2C1() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_I2C1)) +#define __HAL_DBGMCU_FREEZE2_I2C2() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_I2C2)) +#define __HAL_DBGMCU_FREEZE2_I2C3() (DBGMCU->APB1LFZ2 |= (DBGMCU_APB1LFZ2_DBG_I2C3)) +#define __HAL_DBGMCU_FREEZE2_FDCAN() (DBGMCU->APB1HFZ2 |= (DBGMCU_APB1HFZ2_DBG_FDCAN)) + + +#define __HAL_DBGMCU_FREEZE2_TIM1() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM1)) +#define __HAL_DBGMCU_FREEZE2_TIM8() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM8)) +#define __HAL_DBGMCU_FREEZE2_TIM15() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM15)) +#define __HAL_DBGMCU_FREEZE2_TIM16() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM16)) +#define __HAL_DBGMCU_FREEZE2_TIM17() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_TIM17)) +#define __HAL_DBGMCU_FREEZE2_HRTIM() (DBGMCU->APB2FZ2 |= (DBGMCU_APB2FZ2_DBG_HRTIM)) + +#define __HAL_DBGMCU_FREEZE2_I2C4() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_I2C4)) +#define __HAL_DBGMCU_FREEZE2_LPTIM2() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM2)) +#define __HAL_DBGMCU_FREEZE2_LPTIM3() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM3)) +#define __HAL_DBGMCU_FREEZE2_LPTIM4() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM4)) +#define __HAL_DBGMCU_FREEZE2_LPTIM5() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_LPTIM5)) +#define __HAL_DBGMCU_FREEZE2_RTC() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_RTC)) +#define __HAL_DBGMCU_FREEZE2_IWDG1() (DBGMCU->APB4FZ2 |= (DBGMCU_APB4FZ2_DBG_IWDG1)) + +#define __HAL_DBGMCU_UnFreeze2_WWDG1() (DBGMCU->APB3FZ2 &= ~ (DBGMCU_APB3FZ2_DBG_WWDG1)) + +#define __HAL_DBGMCU_UnFreeze2_TIM2() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM2)) +#define __HAL_DBGMCU_UnFreeze2_TIM3() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM3)) +#define __HAL_DBGMCU_UnFreeze2_TIM4() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM4)) +#define __HAL_DBGMCU_UnFreeze2_TIM5() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM5)) +#define __HAL_DBGMCU_UnFreeze2_TIM6() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM6)) +#define __HAL_DBGMCU_UnFreeze2_TIM7() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM7)) +#define __HAL_DBGMCU_UnFreeze2_TIM12() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM12)) +#define __HAL_DBGMCU_UnFreeze2_TIM13() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM13)) +#define __HAL_DBGMCU_UnFreeze2_TIM14() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_TIM14)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM1() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_LPTIM1)) +#define __HAL_DBGMCU_UnFreeze2_I2C1() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_I2C1)) +#define __HAL_DBGMCU_UnFreeze2_I2C2() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_I2C2)) +#define __HAL_DBGMCU_UnFreeze2_I2C3() (DBGMCU->APB1LFZ2 &= ~ (DBGMCU_APB1LFZ2_DBG_I2C3)) +#define __HAL_DBGMCU_UnFreeze2_FDCAN() (DBGMCU->APB1HFZ2 &= ~ (DBGMCU_APB1HFZ2_DBG_FDCAN)) + + +#define __HAL_DBGMCU_UnFreeze2_TIM1() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM1)) +#define __HAL_DBGMCU_UnFreeze2_TIM8() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM8)) +#define __HAL_DBGMCU_UnFreeze2_TIM15() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM15)) +#define __HAL_DBGMCU_UnFreeze2_TIM16() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM16)) +#define __HAL_DBGMCU_UnFreeze2_TIM17() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_TIM17)) +#define __HAL_DBGMCU_UnFreeze2_HRTIM() (DBGMCU->APB2FZ2 &= ~ (DBGMCU_APB2FZ2_DBG_HRTIM)) + +#define __HAL_DBGMCU_UnFreeze2_I2C4() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_I2C4)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM2() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM2)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM3() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM3)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM4() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM4)) +#define __HAL_DBGMCU_UnFreeze2_LPTIM5() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_LPTIM5)) +#define __HAL_DBGMCU_UnFreeze2_RTC() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_RTC)) +#define __HAL_DBGMCU_UnFreeze2_IWDG1() (DBGMCU->APB4FZ2 &= ~ (DBGMCU_APB4FZ2_DBG_IWDG1)) + +#endif /*DUAL_CORE*/ +/** + * @} + */ +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + +/* Exported variables --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +/** @defgroup HAL_Group1 Initialization and de-initialization Functions + * @{ + */ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @defgroup HAL_Group2 HAL Control functions + * + */ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); +#if defined(SYSCFG_PMCR_EPIS_SEL) +void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface); +#endif /* SYSCFG_PMCR_EPIS_SEL */ +void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState ); +#if defined(SYSCFG_PMCR_BOOSTEN) +void HAL_SYSCFG_EnableBOOST(void); +void HAL_SYSCFG_DisableBOOST(void); +#endif /* SYSCFG_PMCR_BOOSTEN */ + +#if defined (SYSCFG_UR2_BOOT_ADD0) || defined (SYSCFG_UR2_BCM7_ADD0) +void HAL_SYSCFG_CM7BootAddConfig(uint32_t BootRegister, uint32_t BootAddress); +#endif /* SYSCFG_UR2_BOOT_ADD0 || SYSCFG_UR2_BCM7_ADD0*/ + +#if defined(DUAL_CORE) +void HAL_SYSCFG_CM4BootAddConfig(uint32_t BootRegister, uint32_t BootAddress); +void HAL_SYSCFG_EnableCM7BOOT(void); +void HAL_SYSCFG_DisableCM7BOOT(void); +void HAL_SYSCFG_EnableCM4BOOT(void); +void HAL_SYSCFG_DisableCM4BOOT(void); +#endif /*DUAL_CORE*/ +void HAL_EnableCompensationCell(void); +void HAL_DisableCompensationCell(void); +void HAL_SYSCFG_EnableIOSpeedOptimize(void); +void HAL_SYSCFG_DisableIOSpeedOptimize(void); +void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode); +void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode); +#if defined(SYSCFG_CCCR_NCC_MMC) +void HAL_SYSCFG_VDDMMC_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode); +#endif /* SYSCFG_CCCR_NCC_MMC */ +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +#if defined(DUAL_CORE) +void HAL_EnableDomain2DBGSleepMode(void); +void HAL_DisableDomain2DBGSleepMode(void); +void HAL_EnableDomain2DBGStopMode(void); +void HAL_DisableDomain2DBGStopMode(void); +void HAL_EnableDomain2DBGStandbyMode(void); +void HAL_DisableDomain2DBGStandbyMode(void); +#endif /*DUAL_CORE*/ +#if defined(DBGMCU_CR_DBG_STOPD3) +void HAL_EnableDomain3DBGStopMode(void); +void HAL_DisableDomain3DBGStopMode(void); +#endif /*DBGMCU_CR_DBG_STOPD3*/ +#if defined(DBGMCU_CR_DBG_STANDBYD3) +void HAL_EnableDomain3DBGStandbyMode(void); +void HAL_DisableDomain3DBGStandbyMode(void); +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ +void HAL_EXTI_EdgeConfig(uint32_t EXTI_Line , uint32_t EXTI_Edge ); +void HAL_EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); +#if defined(DUAL_CORE) +void HAL_EXTI_D2_ClearFlag(uint32_t EXTI_Line); +#endif /*DUAL_CORE*/ +void HAL_EXTI_D1_ClearFlag(uint32_t EXTI_Line); +void HAL_EXTI_D1_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd); +#if defined(DUAL_CORE) +void HAL_EXTI_D2_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd); +#endif /*DUAL_CORE*/ +void HAL_EXTI_D3_EventInputConfig(uint32_t EXTI_Line, uint32_t EXTI_LineCmd , uint32_t EXTI_ClearSrc); +void HAL_SetFMCMemorySwappingConfig(uint32_t BankMapConfig); +uint32_t HAL_GetFMCMemorySwappingConfig(void); +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling); +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode); +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue); +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void); +void HAL_SYSCFG_DisableVREFBUF(void); +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) +void HAL_SYSCFG_ADC2ALT_Rout0Config(uint32_t Adc2AltRout0); +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0*/ +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +void HAL_SYSCFG_ADC2ALT_Rout1Config(uint32_t Adc2AltRout1); +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT1*/ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_H */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h new file mode 100644 index 0000000..2645c28 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h @@ -0,0 +1,459 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_CORTEX_H +#define STM32H7xx_HAL_CORTEX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types Cortex Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +}MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group + * @{ + */ +#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ +/** + * @} + */ + +/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source + * @{ + */ +#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000) +#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004) + +/** + * @} + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000) +#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002) +#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004) +#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_32B ((uint8_t)0x04) +#define MPU_REGION_SIZE_64B ((uint8_t)0x05) +#define MPU_REGION_SIZE_128B ((uint8_t)0x06) +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +#if !defined(CORE_CM4) +#define MPU_REGION_NUMBER8 ((uint8_t)0x08) +#define MPU_REGION_NUMBER9 ((uint8_t)0x09) +#define MPU_REGION_NUMBER10 ((uint8_t)0x0A) +#define MPU_REGION_NUMBER11 ((uint8_t)0x0B) +#define MPU_REGION_NUMBER12 ((uint8_t)0x0C) +#define MPU_REGION_NUMBER13 ((uint8_t)0x0D) +#define MPU_REGION_NUMBER14 ((uint8_t)0x0E) +#define MPU_REGION_NUMBER15 ((uint8_t)0x0F) +#endif /* !defined(CORE_CM4) */ + +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + + +/* Exported Macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + + + +/** @defgroup CORTEX_CPU_Identifier CORTEX_CPU_Identifier + * @{ + */ +#define CM7_CPUID ((uint32_t)0x00000003) + +#if defined(DUAL_CORE) +#define CM4_CPUID ((uint32_t)0x00000001) +#endif /*DUAL_CORE*/ +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +#if (__MPU_PRESENT == 1) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +uint32_t HAL_NVIC_GetPriorityGrouping(void); +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); +uint32_t HAL_GetCurrentCPUID(void); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ + ((GROUP) == NVIC_PRIORITYGROUP_1) || \ + ((GROUP) == NVIC_PRIORITYGROUP_2) || \ + ((GROUP) == NVIC_PRIORITYGROUP_3) || \ + ((GROUP) == NVIC_PRIORITYGROUP_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10UL) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10UL) + +#define IS_NVIC_DEVICE_IRQ(IRQ) (((int32_t)IRQ) >= 0x00) + +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ + ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#if !defined(CORE_CM4) +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7) || \ + ((NUMBER) == MPU_REGION_NUMBER8) || \ + ((NUMBER) == MPU_REGION_NUMBER9) || \ + ((NUMBER) == MPU_REGION_NUMBER10) || \ + ((NUMBER) == MPU_REGION_NUMBER11) || \ + ((NUMBER) == MPU_REGION_NUMBER12) || \ + ((NUMBER) == MPU_REGION_NUMBER13) || \ + ((NUMBER) == MPU_REGION_NUMBER14) || \ + ((NUMBER) == MPU_REGION_NUMBER15)) +#else +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) +#endif /* !defined(CORE_CM4) */ + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ + ((SIZE) == MPU_REGION_SIZE_64B) || \ + ((SIZE) == MPU_REGION_SIZE_128B) || \ + ((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_CORTEX_H */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h new file mode 100644 index 0000000..69101d6 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h @@ -0,0 +1,220 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DEF +#define STM32H7xx_HAL_DEF + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "Legacy/stm32_hal_legacy.h" +#include +#include + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macro ------------------------------------------------------------*/ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +#define UNUSED(x) ((void)(x)) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__: specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) + #error " USE_RTOS should be 0 in the current HAL release " +#else + #define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + + #define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + + +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif + #ifndef __packed + #define __packed __attribute__((packed)) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif +#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */ + #ifndef __ALIGN_END + #define __ALIGN_END __attribute__ ((aligned (4))) + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #define __ALIGN_BEGIN + #endif /* __ALIGN_BEGIN */ +#else + #ifndef __ALIGN_END + #define __ALIGN_END + #endif /* __ALIGN_END */ + #ifndef __ALIGN_BEGIN + #if defined (__CC_ARM) /* ARM Compiler V5 */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #endif /* __CC_ARM */ + #endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */ +#if defined (__GNUC__) /* GNU Compiler */ + #define ALIGN_32BYTES(buf) buf __attribute__ ((aligned (32))) +#elif defined (__ICCARM__) /* IAR Compiler */ + #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf +#elif defined (__CC_ARM) /* ARM Compiler */ + #define ALIGN_32BYTES(buf) __align(32) buf +#endif + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) +/* ARM Compiler V4/V5 and V6 + -------------------------- + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || (defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) || defined ( __GNUC__ ) +/* ARM V4/V5 and V6 & GNU Compiler + ------------------------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DEF */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h new file mode 100644 index 0000000..82f6f21 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h @@ -0,0 +1,1333 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DMA_H +#define STM32H7xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @brief DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified stream. + This parameter can be a value of @ref DMA_Request_selection */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Stream */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. + This parameter can be a value of @ref DMA_Priority_level */ + + uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. + This parameter can be a value of @ref DMA_FIFO_direct_mode + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected stream */ + + uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_FIFO_threshold_level */ + + uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_Memory_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ + + uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_Peripheral_burst + @note The burst mode is possible only if the address Increment mode is enabled. */ +}DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_ERROR = 0x03U, /*!< DMA error state */ + HAL_DMA_STATE_ABORT = 0x04U, /*!< DMA Abort state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Transfer complete level structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U, /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callbacks IDs structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half Transfer */ + HAL_DMA_XFER_M1CPLT_CB_ID = 0x02U, /*!< M1 Full Transfer */ + HAL_DMA_XFER_M1HALFCPLT_CB_ID = 0x03U, /*!< M1 Half Transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x06U /*!< All */ +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + void *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ + + void (* XferM1HalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Half complete Memory1 callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer Abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + uint32_t StreamBaseAddress; /*!< DMA Stream Base Address */ + + uint32_t StreamIndex; /*!< DMA Stream Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< DMAMUX Channel Base Address */ + + DMAMUX_ChannelStatus_TypeDef *DMAmuxChannelStatus; /*!< DMAMUX Channels Status Base Address */ + + uint32_t DMAmuxChannelStatusMask; /*!< DMAMUX Channel Status Mask */ + + + DMAMUX_RequestGen_TypeDef *DMAmuxRequestGen; /*!< DMAMUX request generator Base Address */ + + DMAMUX_RequestGenStatus_TypeDef *DMAmuxRequestGenStatus; /*!< DMAMUX request generator Status Address */ + + uint32_t DMAmuxRequestGenStatusMask; /*!< DMAMUX request generator Status mask */ + +}DMA_HandleTypeDef; + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @brief DMA Exported constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @brief DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_DMA_ERROR_TE (0x00000001U) /*!< Transfer error */ +#define HAL_DMA_ERROR_FE (0x00000002U) /*!< FIFO error */ +#define HAL_DMA_ERROR_DME (0x00000004U) /*!< Direct Mode error */ +#define HAL_DMA_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_DMA_ERROR_PARAM (0x00000040U) /*!< Parameter error */ +#define HAL_DMA_ERROR_NO_XFER (0x00000080U) /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_NOT_SUPPORTED (0x00000100U) /*!< Not supported mode */ +#define HAL_DMA_ERROR_SYNC (0x00000200U) /*!< DMAMUX sync overrun error */ +#define HAL_DMA_ERROR_REQGEN (0x00000400U) /*!< DMAMUX request generator overrun error */ +#define HAL_DMA_ERROR_BUSY (0x00000800U) /*!< DMA Busy error */ + +/** + * @} + */ + +/** @defgroup DMA_Request_selection DMA Request selection + * @brief DMA Request selection + * @{ + */ +/* DMAMUX1 requests */ +#define DMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ + +#define DMA_REQUEST_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ +#define DMA_REQUEST_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ +#define DMA_REQUEST_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ +#define DMA_REQUEST_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ +#define DMA_REQUEST_GENERATOR4 5U /*!< DMAMUX1 request generator 4 */ +#define DMA_REQUEST_GENERATOR5 6U /*!< DMAMUX1 request generator 5 */ +#define DMA_REQUEST_GENERATOR6 7U /*!< DMAMUX1 request generator 6 */ +#define DMA_REQUEST_GENERATOR7 8U /*!< DMAMUX1 request generator 7 */ + +#define DMA_REQUEST_ADC1 9U /*!< DMAMUX1 ADC1 request */ +#define DMA_REQUEST_ADC2 10U /*!< DMAMUX1 ADC2 request */ + +#define DMA_REQUEST_TIM1_CH1 11U /*!< DMAMUX1 TIM1 CH1 request */ +#define DMA_REQUEST_TIM1_CH2 12U /*!< DMAMUX1 TIM1 CH2 request */ +#define DMA_REQUEST_TIM1_CH3 13U /*!< DMAMUX1 TIM1 CH3 request */ +#define DMA_REQUEST_TIM1_CH4 14U /*!< DMAMUX1 TIM1 CH4 request */ +#define DMA_REQUEST_TIM1_UP 15U /*!< DMAMUX1 TIM1 UP request */ +#define DMA_REQUEST_TIM1_TRIG 16U /*!< DMAMUX1 TIM1 TRIG request */ +#define DMA_REQUEST_TIM1_COM 17U /*!< DMAMUX1 TIM1 COM request */ + +#define DMA_REQUEST_TIM2_CH1 18U /*!< DMAMUX1 TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 19U /*!< DMAMUX1 TIM2 CH2 request */ +#define DMA_REQUEST_TIM2_CH3 20U /*!< DMAMUX1 TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 21U /*!< DMAMUX1 TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP 22U /*!< DMAMUX1 TIM2 UP request */ + +#define DMA_REQUEST_TIM3_CH1 23U /*!< DMAMUX1 TIM3 CH1 request */ +#define DMA_REQUEST_TIM3_CH2 24U /*!< DMAMUX1 TIM3 CH2 request */ +#define DMA_REQUEST_TIM3_CH3 25U /*!< DMAMUX1 TIM3 CH3 request */ +#define DMA_REQUEST_TIM3_CH4 26U /*!< DMAMUX1 TIM3 CH4 request */ +#define DMA_REQUEST_TIM3_UP 27U /*!< DMAMUX1 TIM3 UP request */ +#define DMA_REQUEST_TIM3_TRIG 28U /*!< DMAMUX1 TIM3 TRIG request */ + +#define DMA_REQUEST_TIM4_CH1 29U /*!< DMAMUX1 TIM4 CH1 request */ +#define DMA_REQUEST_TIM4_CH2 30U /*!< DMAMUX1 TIM4 CH2 request */ +#define DMA_REQUEST_TIM4_CH3 31U /*!< DMAMUX1 TIM4 CH3 request */ +#define DMA_REQUEST_TIM4_UP 32U /*!< DMAMUX1 TIM4 UP request */ + +#define DMA_REQUEST_I2C1_RX 33U /*!< DMAMUX1 I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX 34U /*!< DMAMUX1 I2C1 TX request */ +#define DMA_REQUEST_I2C2_RX 35U /*!< DMAMUX1 I2C2 RX request */ +#define DMA_REQUEST_I2C2_TX 36U /*!< DMAMUX1 I2C2 TX request */ + +#define DMA_REQUEST_SPI1_RX 37U /*!< DMAMUX1 SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX 38U /*!< DMAMUX1 SPI1 TX request */ +#define DMA_REQUEST_SPI2_RX 39U /*!< DMAMUX1 SPI2 RX request */ +#define DMA_REQUEST_SPI2_TX 40U /*!< DMAMUX1 SPI2 TX request */ + +#define DMA_REQUEST_USART1_RX 41U /*!< DMAMUX1 USART1 RX request */ +#define DMA_REQUEST_USART1_TX 42U /*!< DMAMUX1 USART1 TX request */ +#define DMA_REQUEST_USART2_RX 43U /*!< DMAMUX1 USART2 RX request */ +#define DMA_REQUEST_USART2_TX 44U /*!< DMAMUX1 USART2 TX request */ +#define DMA_REQUEST_USART3_RX 45U /*!< DMAMUX1 USART3 RX request */ +#define DMA_REQUEST_USART3_TX 46U /*!< DMAMUX1 USART3 TX request */ + +#define DMA_REQUEST_TIM8_CH1 47U /*!< DMAMUX1 TIM8 CH1 request */ +#define DMA_REQUEST_TIM8_CH2 48U /*!< DMAMUX1 TIM8 CH2 request */ +#define DMA_REQUEST_TIM8_CH3 49U /*!< DMAMUX1 TIM8 CH3 request */ +#define DMA_REQUEST_TIM8_CH4 50U /*!< DMAMUX1 TIM8 CH4 request */ +#define DMA_REQUEST_TIM8_UP 51U /*!< DMAMUX1 TIM8 UP request */ +#define DMA_REQUEST_TIM8_TRIG 52U /*!< DMAMUX1 TIM8 TRIG request */ +#define DMA_REQUEST_TIM8_COM 53U /*!< DMAMUX1 TIM8 COM request */ + +#define DMA_REQUEST_TIM5_CH1 55U /*!< DMAMUX1 TIM5 CH1 request */ +#define DMA_REQUEST_TIM5_CH2 56U /*!< DMAMUX1 TIM5 CH2 request */ +#define DMA_REQUEST_TIM5_CH3 57U /*!< DMAMUX1 TIM5 CH3 request */ +#define DMA_REQUEST_TIM5_CH4 58U /*!< DMAMUX1 TIM5 CH4 request */ +#define DMA_REQUEST_TIM5_UP 59U /*!< DMAMUX1 TIM5 UP request */ +#define DMA_REQUEST_TIM5_TRIG 60U /*!< DMAMUX1 TIM5 TRIG request */ + +#define DMA_REQUEST_SPI3_RX 61U /*!< DMAMUX1 SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX 62U /*!< DMAMUX1 SPI3 TX request */ + +#define DMA_REQUEST_UART4_RX 63U /*!< DMAMUX1 UART4 RX request */ +#define DMA_REQUEST_UART4_TX 64U /*!< DMAMUX1 UART4 TX request */ +#define DMA_REQUEST_UART5_RX 65U /*!< DMAMUX1 UART5 RX request */ +#define DMA_REQUEST_UART5_TX 66U /*!< DMAMUX1 UART5 TX request */ + +#define DMA_REQUEST_DAC1_CH1 67U /*!< DMAMUX1 DAC1 Channel 1 request */ +#define DMA_REQUEST_DAC1_CH2 68U /*!< DMAMUX1 DAC1 Channel 2 request */ + +#define DMA_REQUEST_TIM6_UP 69U /*!< DMAMUX1 TIM6 UP request */ +#define DMA_REQUEST_TIM7_UP 70U /*!< DMAMUX1 TIM7 UP request */ + +#define DMA_REQUEST_USART6_RX 71U /*!< DMAMUX1 USART6 RX request */ +#define DMA_REQUEST_USART6_TX 72U /*!< DMAMUX1 USART6 TX request */ + +#define DMA_REQUEST_I2C3_RX 73U /*!< DMAMUX1 I2C3 RX request */ +#define DMA_REQUEST_I2C3_TX 74U /*!< DMAMUX1 I2C3 TX request */ + +#if defined (PSSI) +#define DMA_REQUEST_DCMI_PSSI 75U /*!< DMAMUX1 DCMI/PSSI request */ +#define DMA_REQUEST_DCMI DMA_REQUEST_DCMI_PSSI /* Legacy define */ +#else +#define DMA_REQUEST_DCMI 75U /*!< DMAMUX1 DCMI request */ +#endif /* PSSI */ + +#define DMA_REQUEST_CRYP_IN 76U /*!< DMAMUX1 CRYP IN request */ +#define DMA_REQUEST_CRYP_OUT 77U /*!< DMAMUX1 CRYP OUT request */ + +#define DMA_REQUEST_HASH_IN 78U /*!< DMAMUX1 HASH IN request */ + +#define DMA_REQUEST_UART7_RX 79U /*!< DMAMUX1 UART7 RX request */ +#define DMA_REQUEST_UART7_TX 80U /*!< DMAMUX1 UART7 TX request */ +#define DMA_REQUEST_UART8_RX 81U /*!< DMAMUX1 UART8 RX request */ +#define DMA_REQUEST_UART8_TX 82U /*!< DMAMUX1 UART8 TX request */ + +#define DMA_REQUEST_SPI4_RX 83U /*!< DMAMUX1 SPI4 RX request */ +#define DMA_REQUEST_SPI4_TX 84U /*!< DMAMUX1 SPI4 TX request */ +#define DMA_REQUEST_SPI5_RX 85U /*!< DMAMUX1 SPI5 RX request */ +#define DMA_REQUEST_SPI5_TX 86U /*!< DMAMUX1 SPI5 TX request */ + +#define DMA_REQUEST_SAI1_A 87U /*!< DMAMUX1 SAI1 A request */ +#define DMA_REQUEST_SAI1_B 88U /*!< DMAMUX1 SAI1 B request */ + +#if defined(SAI2) +#define DMA_REQUEST_SAI2_A 89U /*!< DMAMUX1 SAI2 A request */ +#define DMA_REQUEST_SAI2_B 90U /*!< DMAMUX1 SAI2 B request */ +#endif /* SAI2 */ + +#define DMA_REQUEST_SWPMI_RX 91U /*!< DMAMUX1 SWPMI RX request */ +#define DMA_REQUEST_SWPMI_TX 92U /*!< DMAMUX1 SWPMI TX request */ + +#define DMA_REQUEST_SPDIF_RX_DT 93U /*!< DMAMUX1 SPDIF RXDT request*/ +#define DMA_REQUEST_SPDIF_RX_CS 94U /*!< DMAMUX1 SPDIF RXCS request*/ + +#if defined(HRTIM1) +#define DMA_REQUEST_HRTIM_MASTER 95U /*!< DMAMUX1 HRTIM1 Master request 1 */ +#define DMA_REQUEST_HRTIM_TIMER_A 96U /*!< DMAMUX1 HRTIM1 Timer A request 2 */ +#define DMA_REQUEST_HRTIM_TIMER_B 97U /*!< DMAMUX1 HRTIM1 Timer B request 3 */ +#define DMA_REQUEST_HRTIM_TIMER_C 98U /*!< DMAMUX1 HRTIM1 Timer C request 4 */ +#define DMA_REQUEST_HRTIM_TIMER_D 99U /*!< DMAMUX1 HRTIM1 Timer D request 5 */ +#define DMA_REQUEST_HRTIM_TIMER_E 100U /*!< DMAMUX1 HRTIM1 Timer E request 6*/ +#endif /* HRTIM1 */ + +#define DMA_REQUEST_DFSDM1_FLT0 101U /*!< DMAMUX1 DFSDM Filter0 request */ +#define DMA_REQUEST_DFSDM1_FLT1 102U /*!< DMAMUX1 DFSDM Filter1 request */ +#define DMA_REQUEST_DFSDM1_FLT2 103U /*!< DMAMUX1 DFSDM Filter2 request */ +#define DMA_REQUEST_DFSDM1_FLT3 104U /*!< DMAMUX1 DFSDM Filter3 request */ + +#define DMA_REQUEST_TIM15_CH1 105U /*!< DMAMUX1 TIM15 CH1 request */ +#define DMA_REQUEST_TIM15_UP 106U /*!< DMAMUX1 TIM15 UP request */ +#define DMA_REQUEST_TIM15_TRIG 107U /*!< DMAMUX1 TIM15 TRIG request */ +#define DMA_REQUEST_TIM15_COM 108U /*!< DMAMUX1 TIM15 COM request */ + +#define DMA_REQUEST_TIM16_CH1 109U /*!< DMAMUX1 TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP 110U /*!< DMAMUX1 TIM16 UP request */ + +#define DMA_REQUEST_TIM17_CH1 111U /*!< DMAMUX1 TIM17 CH1 request */ +#define DMA_REQUEST_TIM17_UP 112U /*!< DMAMUX1 TIM17 UP request */ + +#if defined(SAI3) +#define DMA_REQUEST_SAI3_A 113U /*!< DMAMUX1 SAI3 A request */ +#define DMA_REQUEST_SAI3_B 114U /*!< DMAMUX1 SAI3 B request */ +#endif /* SAI3 */ + +#if defined(ADC3) +#define DMA_REQUEST_ADC3 115U /*!< DMAMUX1 ADC3 request */ +#endif /* ADC3 */ + +#if defined(UART9) +#define DMA_REQUEST_UART9_RX 116U /*!< DMAMUX1 UART9 request */ +#define DMA_REQUEST_UART9_TX 117U /*!< DMAMUX1 UART9 request */ +#endif /* UART9 */ + +#if defined(USART10) +#define DMA_REQUEST_USART10_RX 118U /*!< DMAMUX1 USART10 request */ +#define DMA_REQUEST_USART10_TX 119U /*!< DMAMUX1 USART10 request */ +#endif /* USART10 */ + +#if defined(FMAC) +#define DMA_REQUEST_FMAC_READ 120U /*!< DMAMUX1 FMAC Read request */ +#define DMA_REQUEST_FMAC_WRITE 121U /*!< DMAMUX1 FMAC Write request */ +#endif /* FMAC */ + +#if defined(CORDIC) +#define DMA_REQUEST_CORDIC_READ 122U /*!< DMAMUX1 CORDIC Read request */ +#define DMA_REQUEST_CORDIC_WRITE 123U /*!< DMAMUX1 CORDIC Write request */ +#endif /* CORDIC */ + +#if defined(I2C5) +#define DMA_REQUEST_I2C5_RX 124U /*!< DMAMUX1 I2C5 RX request */ +#define DMA_REQUEST_I2C5_TX 125U /*!< DMAMUX1 I2C5 TX request */ +#endif /* I2C5 */ + +#if defined(TIM23) +#define DMA_REQUEST_TIM23_CH1 126U /*!< DMAMUX1 TIM23 CH1 request */ +#define DMA_REQUEST_TIM23_CH2 127U /*!< DMAMUX1 TIM23 CH2 request */ +#define DMA_REQUEST_TIM23_CH3 128U /*!< DMAMUX1 TIM23 CH3 request */ +#define DMA_REQUEST_TIM23_CH4 129U /*!< DMAMUX1 TIM23 CH4 request */ +#define DMA_REQUEST_TIM23_UP 130U /*!< DMAMUX1 TIM23 UP request */ +#define DMA_REQUEST_TIM23_TRIG 131U /*!< DMAMUX1 TIM23 TRIG request */ +#endif /* TIM23 */ + +#if defined(TIM24) +#define DMA_REQUEST_TIM24_CH1 132U /*!< DMAMUX1 TIM24 CH1 request */ +#define DMA_REQUEST_TIM24_CH2 133U /*!< DMAMUX1 TIM24 CH2 request */ +#define DMA_REQUEST_TIM24_CH3 134U /*!< DMAMUX1 TIM24 CH3 request */ +#define DMA_REQUEST_TIM24_CH4 135U /*!< DMAMUX1 TIM24 CH4 request */ +#define DMA_REQUEST_TIM24_UP 136U /*!< DMAMUX1 TIM24 UP request */ +#define DMA_REQUEST_TIM24_TRIG 137U /*!< DMAMUX1 TIM24 TRIG request */ +#endif /* TIM24 */ + +/* DMAMUX2 requests */ +#define BDMA_REQUEST_MEM2MEM 0U /*!< memory to memory transfer */ +#define BDMA_REQUEST_GENERATOR0 1U /*!< DMAMUX2 request generator 0 */ +#define BDMA_REQUEST_GENERATOR1 2U /*!< DMAMUX2 request generator 1 */ +#define BDMA_REQUEST_GENERATOR2 3U /*!< DMAMUX2 request generator 2 */ +#define BDMA_REQUEST_GENERATOR3 4U /*!< DMAMUX2 request generator 3 */ +#define BDMA_REQUEST_GENERATOR4 5U /*!< DMAMUX2 request generator 4 */ +#define BDMA_REQUEST_GENERATOR5 6U /*!< DMAMUX2 request generator 5 */ +#define BDMA_REQUEST_GENERATOR6 7U /*!< DMAMUX2 request generator 6 */ +#define BDMA_REQUEST_GENERATOR7 8U /*!< DMAMUX2 request generator 7 */ +#define BDMA_REQUEST_LPUART1_RX 9U /*!< DMAMUX2 LP_UART1_RX request */ +#define BDMA_REQUEST_LPUART1_TX 10U /*!< DMAMUX2 LP_UART1_TX request */ +#define BDMA_REQUEST_SPI6_RX 11U /*!< DMAMUX2 SPI6 RX request */ +#define BDMA_REQUEST_SPI6_TX 12U /*!< DMAMUX2 SPI6 TX request */ +#define BDMA_REQUEST_I2C4_RX 13U /*!< DMAMUX2 I2C4 RX request */ +#define BDMA_REQUEST_I2C4_TX 14U /*!< DMAMUX2 I2C4 TX request */ +#if defined(SAI4) +#define BDMA_REQUEST_SAI4_A 15U /*!< DMAMUX2 SAI4 A request */ +#define BDMA_REQUEST_SAI4_B 16U /*!< DMAMUX2 SAI4 B request */ +#endif /* SAI4 */ +#if defined(ADC3) +#define BDMA_REQUEST_ADC3 17U /*!< DMAMUX2 ADC3 request */ +#endif /* ADC3 */ +#if defined(DAC2) +#define BDMA_REQUEST_DAC2_CH1 17U /*!< DMAMUX2 DAC2 CH1 request */ +#endif /* DAC2 */ +#if defined(DFSDM2_Channel0) +#define BDMA_REQUEST_DFSDM2_FLT0 18U /*!< DMAMUX2 DFSDM2 request */ +#endif /* DFSDM1_Channel0 */ + +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @brief DMA data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000U) /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @brief DMA peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ +#define DMA_PINC_DISABLE ((uint32_t)0x00000000U) /*!< Peripheral increment mode disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @brief DMA memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ +#define DMA_MINC_DISABLE ((uint32_t)0x00000000U) /*!< Memory increment mode disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @brief DMA peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @brief DMA memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000U) /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @brief DMA mode + * @{ + */ +#define DMA_NORMAL ((uint32_t)0x00000000U) /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ +#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ +#define DMA_DOUBLE_BUFFER_M0 ((uint32_t)DMA_SxCR_DBM) /*!< Double buffer mode with first target memory M0 */ +#define DMA_DOUBLE_BUFFER_M1 ((uint32_t)(DMA_SxCR_DBM | DMA_SxCR_CT)) /*!< Double buffer mode with first target memory M1 */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @brief DMA priority levels + * @{ + */ +#define DMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level: Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ +/** + * @} + */ + +/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode + * @brief DMA FIFO direct mode + * @{ + */ +#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000U) /*!< FIFO mode disable */ +#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level + * @brief DMA FIFO level + * @{ + */ +#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000U) /*!< FIFO threshold 1 quart full configuration */ +#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ +#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ +#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ +/** + * @} + */ + +/** @defgroup DMA_Memory_burst DMA Memory burst + * @brief DMA memory burst + * @{ + */ +#define DMA_MBURST_SINGLE ((uint32_t)0x00000000U) +#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) +#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) +#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) +/** + * @} + */ + +/** @defgroup DMA_Peripheral_burst DMA Peripheral burst + * @brief DMA peripheral burst + * @{ + */ +#define DMA_PBURST_SINGLE ((uint32_t)0x00000000U) +#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) +#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) +#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) +/** + * @} + */ + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @brief DMA interrupts definition + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) +#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) +#define DMA_IT_FE ((uint32_t)0x00000080U) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @brief DMA flag definitions + * @{ + */ +#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00000001U) +#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00000004U) +#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008U) +#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010U) +#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020U) +#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040U) +#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100U) +#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200U) +#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400U) +#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800U) +#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000U) +#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000U) +#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000U) +#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000U) +#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000U) +#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000U) +#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000U) +#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000U) +#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000U) +#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000U) +/** + * @} + */ + +/** @defgroup BDMA_flag_definitions BDMA flag definitions + * @brief BDMA flag definitions + * @{ + */ +#define BDMA_FLAG_GL0 ((uint32_t)0x00000001) +#define BDMA_FLAG_TC0 ((uint32_t)0x00000002) +#define BDMA_FLAG_HT0 ((uint32_t)0x00000004) +#define BDMA_FLAG_TE0 ((uint32_t)0x00000008) +#define BDMA_FLAG_GL1 ((uint32_t)0x00000010) +#define BDMA_FLAG_TC1 ((uint32_t)0x00000020) +#define BDMA_FLAG_HT1 ((uint32_t)0x00000040) +#define BDMA_FLAG_TE1 ((uint32_t)0x00000080) +#define BDMA_FLAG_GL2 ((uint32_t)0x00000100) +#define BDMA_FLAG_TC2 ((uint32_t)0x00000200) +#define BDMA_FLAG_HT2 ((uint32_t)0x00000400) +#define BDMA_FLAG_TE2 ((uint32_t)0x00000800) +#define BDMA_FLAG_GL3 ((uint32_t)0x00001000) +#define BDMA_FLAG_TC3 ((uint32_t)0x00002000) +#define BDMA_FLAG_HT3 ((uint32_t)0x00004000) +#define BDMA_FLAG_TE3 ((uint32_t)0x00008000) +#define BDMA_FLAG_GL4 ((uint32_t)0x00010000) +#define BDMA_FLAG_TC4 ((uint32_t)0x00020000) +#define BDMA_FLAG_HT4 ((uint32_t)0x00040000) +#define BDMA_FLAG_TE4 ((uint32_t)0x00080000) +#define BDMA_FLAG_GL5 ((uint32_t)0x00100000) +#define BDMA_FLAG_TC5 ((uint32_t)0x00200000) +#define BDMA_FLAG_HT5 ((uint32_t)0x00400000) +#define BDMA_FLAG_TE5 ((uint32_t)0x00800000) +#define BDMA_FLAG_GL6 ((uint32_t)0x01000000) +#define BDMA_FLAG_TC6 ((uint32_t)0x02000000) +#define BDMA_FLAG_HT6 ((uint32_t)0x04000000) +#define BDMA_FLAG_TE6 ((uint32_t)0x08000000) +#define BDMA_FLAG_GL7 ((uint32_t)0x10000000) +#define BDMA_FLAG_TC7 ((uint32_t)0x20000000) +#define BDMA_FLAG_HT7 ((uint32_t)0x40000000) +#define BDMA_FLAG_TE7 ((uint32_t)0x80000000) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state + * @param __HANDLE__: specifies the DMA handle. + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Return the current DMA Stream FIFO filled level. + * @param __HANDLE__: DMA handle + * @retval The FIFO filling state. + * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full + * and not empty. + * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. + * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. + * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. + * - DMA_FIFOStatus_Empty: when FIFO is empty + * - DMA_FIFOStatus_Full: when FIFO is full + */ +#define __HAL_DMA_GET_FS(__HANDLE__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (DMA_SxFCR_FS)) : 0) + +/** + * @brief Enable the specified DMA Stream. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) \ +((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= DMA_SxCR_EN) : \ +(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR |= BDMA_CCR_EN)) + +/** + * @brief Disable the specified DMA Stream. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) \ +((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~DMA_SxCR_EN) : \ +(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR &= ~BDMA_CCR_EN)) + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Stream transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer complete flag index. + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_FLAG_TC0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_FLAG_TC0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_FLAG_TC7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_FLAG_TC7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TCIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_TC0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_TC7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Return the current DMA Stream half transfer complete flag. + * @param __HANDLE__: DMA handle + * @retval The specified half transfer complete flag index. + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_FLAG_HT0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_FLAG_HT0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_FLAG_HT7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_FLAG_HT7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_HTIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_HT0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_HT7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Return the current DMA Stream transfer error flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_FLAG_TE0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_FLAG_TE0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_FLAG_TE7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_FLAG_TE7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_TE0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_TE7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Return the current DMA Stream FIFO error flag. + * @param __HANDLE__: DMA handle + * @retval The specified FIFO error flag index. + */ +#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_FEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_FEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_FEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_FEIF3_7 :\ + (uint32_t)0x00000000) + +/** + * @brief Return the current DMA Stream direct mode error flag. + * @param __HANDLE__: DMA handle + * @retval The specified direct mode error flag index. + */ +#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_DMEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_DMEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_DMEIF3_7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_DMEIF3_7 :\ + (uint32_t)0x00000000) + +/** + * @brief Returns the current BDMA Channel Global interrupt flag. + * @param __HANDLE__: DMA handle + * @retval The specified transfer error flag index. + */ +#if defined(BDMA1) +#define __HAL_BDMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel0))? BDMA_ISR_GIF0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel0))? BDMA_ISR_GIF0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel1))? BDMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel1))? BDMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel2))? BDMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel2))? BDMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel3))? BDMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel3))? BDMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel4))? BDMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel4))? BDMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel5))? BDMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel5))? BDMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel6))? BDMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel6))? BDMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA1_Channel7))? BDMA_ISR_GIF7 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA2_Channel7))? BDMA_ISR_GIF7 :\ + (uint32_t)0x00000000) +#else +#define __HAL_BDMA_GET_GI_FLAG_INDEX(__HANDLE__)\ +(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_ISR_GIF0 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_ISR_GIF7 :\ + (uint32_t)0x00000000) +#endif /* BDMA1 */ + +/** + * @brief Get the DMA Stream pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag. + * @arg DMA_FLAG_HTIFx: Half transfer complete flag. + * @arg DMA_FLAG_TEIFx: Transfer error flag. + * @arg DMA_FLAG_DMEIFx: Direct mode error flag. + * @arg DMA_FLAG_FEIFx: FIFO error flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. + * @retval The state of FLAG (SET or RESET). + */ +#if defined(BDMA1) +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)BDMA1_Channel7)? (BDMA2->ISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7 )? (BDMA1->ISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3 )? (DMA2->HISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7 )? (DMA2->LISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3 )? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) +#else +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA->ISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) +#endif /* BDMA1 */ + +/** + * @brief Clear the DMA Stream pending flags. + * @param __HANDLE__: DMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCIFx: Transfer complete flag. + * @arg DMA_FLAG_HTIFx: Half transfer complete flag. + * @arg DMA_FLAG_TEIFx: Transfer error flag. + * @arg DMA_FLAG_DMEIFx: Direct mode error flag. + * @arg DMA_FLAG_FEIFx: FIFO error flag. + * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. + * @retval None + */ +#if defined(BDMA1) +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)BDMA1_Channel7)? (BDMA2->IFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA1->IFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) +#else +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ +(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA->IFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ + ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) +#endif /* BDMA1 */ + +#define DMA_TO_BDMA_IT(__DMA_IT__) \ +((((__DMA_IT__) & (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)) == (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)) ? (BDMA_CCR_TCIE | BDMA_CCR_HTIE |BDMA_CCR_TEIE) :\ + (((__DMA_IT__) & (DMA_IT_TC | DMA_IT_HT)) == (DMA_IT_TC | DMA_IT_HT)) ? (BDMA_CCR_TCIE | BDMA_CCR_HTIE) :\ + (((__DMA_IT__) & (DMA_IT_HT | DMA_IT_TE)) == (DMA_IT_HT | DMA_IT_TE)) ? (BDMA_CCR_HTIE |BDMA_CCR_TEIE) :\ + (((__DMA_IT__) & (DMA_IT_TC | DMA_IT_TE)) == (DMA_IT_TC | DMA_IT_TE)) ? (BDMA_CCR_TCIE |BDMA_CCR_TEIE) :\ + ((__DMA_IT__) == DMA_IT_TC) ? BDMA_CCR_TCIE :\ + ((__DMA_IT__) == DMA_IT_HT) ? BDMA_CCR_HTIE :\ + ((__DMA_IT__) == DMA_IT_TE) ? BDMA_CCR_TEIE :\ + (uint32_t)0x00000000) + + +#define __HAL_BDMA_CHANNEL_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ +(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR |= (DMA_TO_BDMA_IT(__INTERRUPT__))) + +#define __HAL_DMA_STREAM_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ +(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= (__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR |= (__INTERRUPT__))) + +/** + * @brief Enable the specified DMA Stream interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))?\ + (__HAL_DMA_STREAM_ENABLE_IT((__HANDLE__), (__INTERRUPT__))) :\ + (__HAL_BDMA_CHANNEL_ENABLE_IT((__HANDLE__), (__INTERRUPT__)))) + + +#define __HAL_BDMA_CHANNEL_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR &= ~(DMA_TO_BDMA_IT(__INTERRUPT__))) + +#define __HAL_DMA_STREAM_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ +(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~(__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR &= ~(__INTERRUPT__))) + +/** + * @brief Disable the specified DMA Stream interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))?\ + (__HAL_DMA_STREAM_DISABLE_IT((__HANDLE__), (__INTERRUPT__))) :\ + (__HAL_BDMA_CHANNEL_DISABLE_IT((__HANDLE__), (__INTERRUPT__)))) + + +#define __HAL_BDMA_CHANNEL_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR & (DMA_TO_BDMA_IT(__INTERRUPT__)))) + +#define __HAL_DMA_STREAM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR & (__INTERRUPT__)) : \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (__INTERRUPT__))) + +/** + * @brief Check whether the specified DMA Stream interrupt is enabled or not. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask. + * @arg DMA_IT_HT: Half transfer complete interrupt mask. + * @arg DMA_IT_TE: Transfer error interrupt mask. + * @arg DMA_IT_FE: FIFO error interrupt mask. + * @arg DMA_IT_DME: Direct mode error interrupt. + * @retval The state of DMA_IT. + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \ + (__HAL_DMA_STREAM_GET_IT_SOURCE((__HANDLE__), (__INTERRUPT__))) :\ + (__HAL_BDMA_CHANNEL_GET_IT_SOURCE((__HANDLE__), (__INTERRUPT__)))) + +/** + * @brief Writes the number of data units to be transferred on the DMA Stream. + * @param __HANDLE__: DMA handle + * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535) + * Number of data items depends only on the Peripheral data format. + * + * @note If Peripheral data format is Bytes: number of data units is equal + * to total number of bytes to be transferred. + * + * @note If Peripheral data format is Half-Word: number of data units is + * equal to total number of bytes to be transferred / 2. + * + * @note If Peripheral data format is Word: number of data units is equal + * to total number of bytes to be transferred / 4. + * + * @retval The number of remaining data units in the current DMAy Streamx transfer. + */ +#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR = (uint16_t)(__COUNTER__)) :\ + (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CNDTR = (uint16_t)(__COUNTER__))) + +/** + * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. + * @param __HANDLE__: DMA handle + * + * @retval The number of remaining data units in the current DMA Stream transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \ + (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR) :\ + (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CNDTR)) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32h7xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @brief DMA Exported functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions + * @brief I/O operation functions + * @{ + */ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/** + * @} + */ +/* Private Constants -------------------------------------------------------------*/ +/** @defgroup DMA_Private_Constants DMA Private Constants + * @brief DMA private defines and constants + * @{ + */ +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup DMA_Private_Types DMA Private Types + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @brief DMA private macros + * @{ + */ + +#if defined(TIM24) +#define IS_DMA_REQUEST(REQUEST) (((REQUEST) <= DMA_REQUEST_TIM24_TRIG)) +#elif defined(ADC3) +#define IS_DMA_REQUEST(REQUEST) (((REQUEST) <= DMA_REQUEST_ADC3)) +#else +#define IS_DMA_REQUEST(REQUEST) (((REQUEST) <= DMA_REQUEST_USART10_TX)) +#endif /* TIM24 */ + +#if defined(ADC3) +#define IS_BDMA_REQUEST(REQUEST) (((REQUEST) <= BDMA_REQUEST_ADC3)) +#else +#define IS_BDMA_REQUEST(REQUEST) (((REQUEST) <= BDMA_REQUEST_DFSDM2_FLT0)) +#endif /* ADC3 */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x01U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR) || \ + ((MODE) == DMA_PFCTRL) || \ + ((MODE) == DMA_DOUBLE_BUFFER_M0) || \ + ((MODE) == DMA_DOUBLE_BUFFER_M1)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ + ((STATE) == DMA_FIFOMODE_ENABLE)) + +#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ + ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) + +#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ + ((BURST) == DMA_MBURST_INC4) || \ + ((BURST) == DMA_MBURST_INC8) || \ + ((BURST) == DMA_MBURST_INC16)) + +#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ + ((BURST) == DMA_PBURST_INC4) || \ + ((BURST) == DMA_PBURST_INC8) || \ + ((BURST) == DMA_PBURST_INC16)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @brief DMA private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DMA_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h new file mode 100644 index 0000000..cde5755 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h @@ -0,0 +1,310 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma_ex.h + * @author MCD Application Team + * @brief Header file of DMA HAL extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_DMA_EX_H +#define STM32H7xx_HAL_DMA_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMAEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Types DMAEx Exported Types + * @brief DMAEx Exported types + * @{ + */ + +/** + * @brief HAL DMA Memory definition + */ +typedef enum +{ + MEMORY0 = 0x00U, /*!< Memory 0 */ + MEMORY1 = 0x01U, /*!< Memory 1 */ + +}HAL_DMA_MemoryTypeDef; + +/** + * @brief HAL DMAMUX Synchronization configuration structure definition + */ +typedef struct +{ + uint32_t SyncSignalID; /*!< Specifies the synchronization signal gating the DMA request in periodic mode. + This parameter can be a value of @ref DMAEx_MUX_SyncSignalID_selection */ + + uint32_t SyncPolarity; /*!< Specifies the polarity of the signal on which the DMA request is synchronized. + This parameter can be a value of @ref DMAEx_MUX_SyncPolarity_selection */ + + FunctionalState SyncEnable; /*!< Specifies if the synchronization shall be enabled or disabled + This parameter can take the value ENABLE or DISABLE*/ + + + FunctionalState EventEnable; /*!< Specifies if an event shall be generated once the RequestNumber is reached. + This parameter can take the value ENABLE or DISABLE */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event. + This parameters can be in the range 1 to 32 */ + +}HAL_DMA_MuxSyncConfigTypeDef; + + +/** + * @brief HAL DMAMUX request generator parameters structure definition + */ +typedef struct +{ + uint32_t SignalID; /*!< Specifies the ID of the signal used for DMAMUX request generator + This parameter can be a value of @ref DMAEx_MUX_SignalGeneratorID_selection */ + + uint32_t Polarity; /*!< Specifies the polarity of the signal on which the request is generated. + This parameter can be a value of @ref DMAEx_MUX_RequestGeneneratorPolarity_selection */ + + uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be generated after a signal event. + This parameters can be in the range 1 to 32 */ + +}HAL_DMA_MuxRequestGeneratorConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMAEx_Exported_Constants DMA Exported Constants + * @brief DMAEx Exported constants + * @{ + */ + +/** @defgroup DMAEx_MUX_SyncSignalID_selection DMAEx MUX SyncSignalID selection + * @brief DMAEx MUX SyncSignalID selection + * @{ + */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_SYNC_LPTIM1_OUT 3U /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_SYNC_LPTIM2_OUT 4U /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT */ +#define HAL_DMAMUX1_SYNC_LPTIM3_OUT 5U /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT */ +#define HAL_DMAMUX1_SYNC_EXTI0 6U /*!< DMAMUX1 synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX1_SYNC_TIM12_TRGO 7U /*!< DMAMUX1 synchronization Signal is TIM12 TRGO */ + +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel0 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel1 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel2 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel3 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel4 Event */ +#define HAL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel5 Event */ +#define HAL_DMAMUX2_SYNC_LPUART1_RX_WKUP 6U /*!< DMAMUX2 synchronization Signal is LPUART1 RX Wakeup */ +#define HAL_DMAMUX2_SYNC_LPUART1_TX_WKUP 7U /*!< DMAMUX2 synchronization Signal is LPUART1 TX Wakeup */ +#define HAL_DMAMUX2_SYNC_LPTIM2_OUT 8U /*!< DMAMUX2 synchronization Signal is LPTIM2 output */ +#define HAL_DMAMUX2_SYNC_LPTIM3_OUT 9U /*!< DMAMUX2 synchronization Signal is LPTIM3 output */ +#define HAL_DMAMUX2_SYNC_I2C4_WKUP 10U /*!< DMAMUX2 synchronization Signal is I2C4 Wakeup */ +#define HAL_DMAMUX2_SYNC_SPI6_WKUP 11U /*!< DMAMUX2 synchronization Signal is SPI6 Wakeup */ +#define HAL_DMAMUX2_SYNC_COMP1_OUT 12U /*!< DMAMUX2 synchronization Signal is Comparator 1 output */ +#define HAL_DMAMUX2_SYNC_RTC_WKUP 13U /*!< DMAMUX2 synchronization Signal is RTC Wakeup */ +#define HAL_DMAMUX2_SYNC_EXTI0 14U /*!< DMAMUX2 synchronization Signal is EXTI0 IT */ +#define HAL_DMAMUX2_SYNC_EXTI2 15U /*!< DMAMUX2 synchronization Signal is EXTI2 IT */ + +/** + * @} + */ + +/** @defgroup DMAEx_MUX_SyncPolarity_selection DMAEx MUX SyncPolarity selection + * @brief DMAEx MUX SyncPolarity selection + * @{ + */ +#define HAL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< block synchronization events */ +#define HAL_DMAMUX_SYNC_RISING DMAMUX_CxCR_SPOL_0 /*!< synchronize with rising edge events */ +#define HAL_DMAMUX_SYNC_FALLING DMAMUX_CxCR_SPOL_1 /*!< synchronize with falling edge events */ +#define HAL_DMAMUX_SYNC_RISING_FALLING DMAMUX_CxCR_SPOL /*!< synchronize with rising and falling edge events */ + +/** + * @} + */ + + +/** @defgroup DMAEx_MUX_SignalGeneratorID_selection DMAEx MUX SignalGeneratorID selection + * @brief DMAEx MUX SignalGeneratorID selection + * @{ + */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */ +#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT 3U /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT 4U /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT */ +#define HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT 5U /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT */ +#define HAL_DMAMUX1_REQ_GEN_EXTI0 6U /*!< DMAMUX1 Request generator Signal is EXTI0 IT */ +#define HAL_DMAMUX1_REQ_GEN_TIM12_TRGO 7U /*!< DMAMUX1 Request generator Signal is TIM12 TRGO */ + +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel0 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel1 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel2 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel3 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel4 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel5 Event */ +#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT 6U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel6 Event */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP 7U /*!< DMAMUX2 Request generator Signal is LPUART1 RX Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP 8U /*!< DMAMUX2 Request generator Signal is LPUART1 TX Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP 9U /*!< DMAMUX2 Request generator Signal is LPTIM2 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT 10U /*!< DMAMUX2 Request generator Signal is LPTIM2 OUT */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP 11U /*!< DMAMUX2 Request generator Signal is LPTIM3 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT 12U /*!< DMAMUX2 Request generator Signal is LPTIM3 OUT */ +#if defined(LPTIM4) +#define HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP 13U /*!< DMAMUX2 Request generator Signal is LPTIM4 Wakeup */ +#endif /* LPTIM4 */ +#if defined(LPTIM5) +#define HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP 14U /*!< DMAMUX2 Request generator Signal is LPTIM5 Wakeup */ +#endif /* LPTIM5 */ +#define HAL_DMAMUX2_REQ_GEN_I2C4_WKUP 15U /*!< DMAMUX2 Request generator Signal is I2C4 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_SPI6_WKUP 16U /*!< DMAMUX2 Request generator Signal is SPI6 Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_COMP1_OUT 17U /*!< DMAMUX2 Request generator Signal is Comparator 1 output */ +#define HAL_DMAMUX2_REQ_GEN_COMP2_OUT 18U /*!< DMAMUX2 Request generator Signal is Comparator 2 output */ +#define HAL_DMAMUX2_REQ_GEN_RTC_WKUP 19U /*!< DMAMUX2 Request generator Signal is RTC Wakeup */ +#define HAL_DMAMUX2_REQ_GEN_EXTI0 20U /*!< DMAMUX2 Request generator Signal is EXTI0 */ +#define HAL_DMAMUX2_REQ_GEN_EXTI2 21U /*!< DMAMUX2 Request generator Signal is EXTI2 */ +#define HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT 22U /*!< DMAMUX2 Request generator Signal is I2C4 IT Event */ +#define HAL_DMAMUX2_REQ_GEN_SPI6_IT 23U /*!< DMAMUX2 Request generator Signal is SPI6 IT */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT 24U /*!< DMAMUX2 Request generator Signal is LPUART1 Tx IT */ +#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT 25U /*!< DMAMUX2 Request generator Signal is LPUART1 Rx IT */ +#if defined(ADC3) +#define HAL_DMAMUX2_REQ_GEN_ADC3_IT 26U /*!< DMAMUX2 Request generator Signal is ADC3 IT */ +#define HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT 27U /*!< DMAMUX2 Request generator Signal is ADC3 Analog Watchdog 1 output */ +#endif /* ADC3 */ +#define HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT 28U /*!< DMAMUX2 Request generator Signal is BDMA Channel 0 IT */ +#define HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT 29U /*!< DMAMUX2 Request generator Signal is BDMA Channel 1 IT */ + + +/** + * @} + */ + +/** @defgroup DMAEx_MUX_RequestGeneneratorPolarity_selection DMAEx MUX RequestGeneneratorPolarity selection + * @brief DMAEx MUX RequestGeneneratorPolarity selection + * @{ + */ +#define HAL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< block request generator events */ +#define HAL_DMAMUX_REQ_GEN_RISING DMAMUX_RGxCR_GPOL_0 /*!< generate request on rising edge events */ +#define HAL_DMAMUX_REQ_GEN_FALLING DMAMUX_RGxCR_GPOL_1 /*!< generate request on falling edge events */ +#define HAL_DMAMUX_REQ_GEN_RISING_FALLING DMAMUX_RGxCR_GPOL /*!< generate request on rising and falling edge events */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions + * @brief DMAEx Exported functions + * @{ + */ + +/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions + * @brief Extended features functions + * @{ + */ + +/* IO operation functions *******************************************************/ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig); +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig); +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma); + +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Macros DMA Private Macros + * @brief DMAEx private macros + * @{ + */ + +#define IS_DMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_TIM12_TRGO) +#define IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_SYNC_EXTI2) + +#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING)) + +#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE) || ((SYNC) == ENABLE)) + +#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE) || \ + ((EVENT) == ENABLE)) + +#define IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_TIM12_TRGO) +#define IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT) + +#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U)) + +#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING) || \ + ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup DMAEx_Private_Functions DMAEx Private Functions + * @brief DMAEx Private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_DMA_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h new file mode 100644 index 0000000..91d7d95 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h @@ -0,0 +1,537 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_exti.h + * @author MCD Application Team + * @brief Header file of EXTI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_EXTI_H +#define STM32H7xx_HAL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup EXTI EXTI + * @brief EXTI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Types EXTI Exported Types + * @{ + */ +typedef enum +{ + HAL_EXTI_COMMON_CB_ID = 0x00U, +} EXTI_CallbackIDTypeDef; + + +/** + * @brief EXTI Handle structure definition + */ +typedef struct +{ + uint32_t Line; /*!< Exti line number */ + void (* PendingCallback)(void); /*!< Exti pending callback */ +} EXTI_HandleTypeDef; + +/** + * @brief EXTI Configuration structure definition + */ +typedef struct +{ + uint32_t Line; /*!< The Exti line to be configured. This parameter + can be a value of @ref EXTI_Line */ + uint32_t Mode; /*!< The Exit Mode to be configured for a core. + This parameter can be a combination of @ref EXTI_Mode */ + uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter + can be a value of @ref EXTI_Trigger */ + uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. + This parameter is only possible for line 0 to 15. It + can be a value of @ref EXTI_GPIOSel */ + + uint32_t PendClearSource; /*!< Specifies the event pending clear source for D3/SRD + domain. This parameter can be a value of @ref + EXTI_PendClear_Source */ + +} EXTI_ConfigTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_Line EXTI Line + * @{ + */ +#define EXTI_LINE_0 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x00U) +#define EXTI_LINE_1 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x01U) +#define EXTI_LINE_2 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x02U) +#define EXTI_LINE_3 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x03U) +#define EXTI_LINE_4 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x04U) +#define EXTI_LINE_5 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x05U) +#define EXTI_LINE_6 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x06U) +#define EXTI_LINE_7 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x07U) +#define EXTI_LINE_8 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x08U) +#define EXTI_LINE_9 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x09U) +#define EXTI_LINE_10 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0AU) +#define EXTI_LINE_11 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0BU) +#define EXTI_LINE_12 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0CU) +#define EXTI_LINE_13 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0DU) +#define EXTI_LINE_14 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0EU) +#define EXTI_LINE_15 (EXTI_GPIO | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x0FU) +#define EXTI_LINE_16 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x10U) +#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x11U) +#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x12U) +#define EXTI_LINE_19 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x13U) +#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x14U) +#define EXTI_LINE_21 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x15U) +#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x16U) +#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x17U) +#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x18U) +#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL | 0x19U) +#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU) +#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU) +#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU) +#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU) +#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU) +#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU) +#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x00U) +#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x01U) +#define EXTI_LINE_34 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x02U) +#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x03U) +#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x04U) +#define EXTI_LINE_37 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x05U) +#define EXTI_LINE_38 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x06U) +#define EXTI_LINE_39 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x07U) +#define EXTI_LINE_40 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x08U) +#define EXTI_LINE_41 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x09U) +#define EXTI_LINE_42 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU) +#define EXTI_LINE_43 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU) +#if !defined(USB2_OTG_FS) +#define EXTI_LINE_44 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0CU) +#else +#define EXTI_LINE_44 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU) +#endif /* USB2_OTG_FS */ +#define EXTI_LINE_45 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0DU) +#if defined(DSI) +#define EXTI_LINE_46 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0EU) +#else +#define EXTI_LINE_46 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x0EU) +#endif /* DSI */ +#define EXTI_LINE_47 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0FU) +#define EXTI_LINE_48 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x10U) +#define EXTI_LINE_49 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x11U) +#define EXTI_LINE_50 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x12U) +#define EXTI_LINE_51 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x13U) +#if defined(LPTIM4) +#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x14U) +#else +#define EXTI_LINE_52 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x14U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL | 0x15U) +#else +#define EXTI_LINE_53 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x15U) +#endif /*LPTIM5*/ +#define EXTI_LINE_54 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x16U) +#define EXTI_LINE_55 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x17U) +#define EXTI_LINE_56 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x18U) +#if defined(EXTI_IMR2_IM57) +#define EXTI_LINE_57 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x19U) +#else +#define EXTI_LINE_57 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x19U) +#endif /*EXTI_IMR2_IM57*/ +#define EXTI_LINE_58 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU) +#if defined(EXTI_IMR2_IM59) +#define EXTI_LINE_59 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU) +#else +#define EXTI_LINE_59 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE | 0x1BU) +#endif /*EXTI_IMR2_IM59*/ +#define EXTI_LINE_60 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU) +#define EXTI_LINE_61 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU) +#define EXTI_LINE_62 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU) +#define EXTI_LINE_63 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU) +#define EXTI_LINE_64 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x00U) +#define EXTI_LINE_65 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x01U) +#define EXTI_LINE_66 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x02U) +#define EXTI_LINE_67 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x03U) +#define EXTI_LINE_68 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x04U) +#define EXTI_LINE_69 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x05U) +#define EXTI_LINE_70 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x06U) +#define EXTI_LINE_71 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x07U) +#define EXTI_LINE_72 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x08U) +#define EXTI_LINE_73 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x09U) +#define EXTI_LINE_74 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU) +#if defined(ADC3) +#define EXTI_LINE_75 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU) +#else +#define EXTI_LINE_75 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE | 0x0BU) +#endif /* ADC3 */ +#if defined(SAI4) +#define EXTI_LINE_76 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU) +#else +#define EXTI_LINE_76 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE | 0x0CU) +#endif /* SAI4 */ +#if defined (DUAL_CORE) +#define EXTI_LINE_77 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0DU) +#define EXTI_LINE_78 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x0EU) +#define EXTI_LINE_79 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0FU) +#define EXTI_LINE_80 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x10U) +#else +#define EXTI_LINE_77 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0DU) +#define EXTI_LINE_78 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0EU) +#define EXTI_LINE_79 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0FU) +#define EXTI_LINE_80 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x10U) +#endif /* DUAL_CORE */ +#define EXTI_LINE_81 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x11U) +#if defined (DUAL_CORE) +#define EXTI_LINE_82 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x12U) +#else +#define EXTI_LINE_82 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x12U) +#endif /* DUAL_CORE */ +#define EXTI_LINE_83 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x13U) +#if defined (DUAL_CORE) +#define EXTI_LINE_84 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x14U) +#else +#define EXTI_LINE_84 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x14U) +#endif /* DUAL_CORE */ +#define EXTI_LINE_85 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x15U) +#if defined(ETH) +#define EXTI_LINE_86 (EXTI_CONFIG | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x16U) +#else +#define EXTI_LINE_86 (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x16U) +#endif /* ETH */ +#define EXTI_LINE_87 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x17U) +#if defined(DTS) +#define EXTI_LINE_88 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL | 0x18U) +#endif /* DTS */ +#if defined(EXTI_IMR3_IM89) +#define EXTI_LINE_89 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x19U) +#endif /*EXTI_IMR3_IM89*/ +#if defined(EXTI_IMR3_IM90) +#define EXTI_LINE_90 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU) +#endif /*EXTI_IMR3_IM90*/ +#if defined(I2C5) +#define EXTI_LINE_91 (EXTI_DIRECT | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU) +#endif /*I2C5*/ + +/** + * @} + */ + +/** @defgroup EXTI_Mode EXTI Mode + * @{ + */ +#define EXTI_MODE_NONE 0x00000000U +#define EXTI_MODE_INTERRUPT 0x00000001U +#define EXTI_MODE_EVENT 0x00000002U +#if defined(DUAL_CORE) +#define EXTI_MODE_CORE1_INTERRUPT EXTI_MODE_INTERRUPT +#define EXTI_MODE_CORE1_EVENT EXTI_MODE_EVENT +#define EXTI_MODE_CORE2_INTERRUPT 0x00000010U +#define EXTI_MODE_CORE2_EVENT 0x00000020U +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup EXTI_Trigger EXTI Trigger + * @{ + */ +#define EXTI_TRIGGER_NONE 0x00000000U +#define EXTI_TRIGGER_RISING 0x00000001U +#define EXTI_TRIGGER_FALLING 0x00000002U +#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) +/** + * @} + */ + +/** @defgroup EXTI_GPIOSel EXTI GPIOSel + * @brief + * @{ + */ +#define EXTI_GPIOA 0x00000000U +#define EXTI_GPIOB 0x00000001U +#define EXTI_GPIOC 0x00000002U +#define EXTI_GPIOD 0x00000003U +#define EXTI_GPIOE 0x00000004U +#define EXTI_GPIOF 0x00000005U +#define EXTI_GPIOG 0x00000006U +#define EXTI_GPIOH 0x00000007U +#if defined(GPIOI) +#define EXTI_GPIOI 0x00000008U +#endif /*GPIOI*/ +#define EXTI_GPIOJ 0x00000009U +#define EXTI_GPIOK 0x0000000AU + +/** + * @} + */ + +/** @defgroup EXTI_PendClear_Source EXTI PendClear Source + * @brief + * @{ + */ +#define EXTI_D3_PENDCLR_SRC_NONE 0x00000000U /*!< No D3 domain pendclear source , PMRx register to be set to zero */ +#define EXTI_D3_PENDCLR_SRC_DMACH6 0x00000001U /*!< DMA ch6 event selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#define EXTI_D3_PENDCLR_SRC_DMACH7 0x00000002U /*!< DMA ch7 event selected as D3 domain pendclear source, PMRx register to be set to 1*/ +#if defined (LPTIM4) +#define EXTI_D3_PENDCLR_SRC_LPTIM4 0x00000003U /*!< LPTIM4 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#else +#define EXTI_D3_PENDCLR_SRC_LPTIM2 0x00000003U /*!< LPTIM2 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#endif +#if defined (LPTIM5) +#define EXTI_D3_PENDCLR_SRC_LPTIM5 0x00000004U /*!< LPTIM5 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#else +#define EXTI_D3_PENDCLR_SRC_LPTIM3 0x00000004U /*!< LPTIM3 out selected as D3 domain pendclear source, PMRx register to be set to 1 */ +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +/** + * @brief EXTI Line property definition + */ +#define EXTI_PROPERTY_SHIFT 24U +#define EXTI_DIRECT (0x01UL << EXTI_PROPERTY_SHIFT) +#define EXTI_CONFIG (0x02UL << EXTI_PROPERTY_SHIFT) +#define EXTI_GPIO ((0x04UL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) +#define EXTI_RESERVED (0x08UL << EXTI_PROPERTY_SHIFT) +#define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) + +/** + * @brief EXTI Event presence definition + */ +#define EXTI_EVENT_PRESENCE_SHIFT 28U +#define EXTI_EVENT (0x01UL << EXTI_EVENT_PRESENCE_SHIFT) +#define EXTI_EVENT_PRESENCE_MASK (EXTI_EVENT) + +/** + * @brief EXTI Register and bit usage + */ +#define EXTI_REG_SHIFT 16U +#define EXTI_REG1 (0x00UL << EXTI_REG_SHIFT) +#define EXTI_REG2 (0x01UL << EXTI_REG_SHIFT) +#define EXTI_REG3 (0x02UL << EXTI_REG_SHIFT) +#define EXTI_REG_MASK (EXTI_REG1 | EXTI_REG2 | EXTI_REG3) +#define EXTI_PIN_MASK 0x0000001FUL + +/** + * @brief EXTI Target and bit usage + */ +#define EXTI_TARGET_SHIFT 20U +#define EXTI_TARGET_MSK_NONE (0x00UL << EXTI_TARGET_SHIFT) +#define EXTI_TARGET_MSK_D3SRD (0x01UL << EXTI_TARGET_SHIFT) +#define EXTI_TARGET_MSK_CPU1 (0x02UL << EXTI_TARGET_SHIFT) +#if defined (DUAL_CORE) +#define EXTI_TARGET_MSK_CPU2 (0x04UL << EXTI_TARGET_SHIFT) +#define EXTI_TARGET_MASK (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2) +#define EXTI_TARGET_MSK_ALL_CPU (EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2) +#else +#define EXTI_TARGET_MASK (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1) +#define EXTI_TARGET_MSK_ALL_CPU EXTI_TARGET_MSK_CPU1 +#endif /* DUAL_CORE */ +#define EXTI_TARGET_MSK_ALL EXTI_TARGET_MASK + +/** + * @brief EXTI Mask for interrupt & event mode + */ +#if defined (DUAL_CORE) +#define EXTI_MODE_MASK (EXTI_MODE_CORE1_EVENT | EXTI_MODE_CORE1_INTERRUPT | EXTI_MODE_CORE2_INTERRUPT | EXTI_MODE_CORE2_EVENT) +#else +#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) +#endif /* DUAL_CORE */ + +/** + * @brief EXTI Mask for trigger possibilities + */ +#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) + +/** + * @brief EXTI Line number + */ +#if (STM32H7_DEV_ID == 0x483UL) +#define EXTI_LINE_NB 92UL +#elif (STM32H7_DEV_ID == 0x480UL) +#define EXTI_LINE_NB 89UL +#else +#define EXTI_LINE_NB 88UL +#endif /* EXTI_LINE_91 */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Macros EXTI Private Macros + * @{ + */ +#define IS_EXTI_PROPERTY(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ + (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) +#if defined (DUAL_CORE) +#define IS_EXTI_TARGET(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU2) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL_CPU) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)) +#else +#define IS_EXTI_TARGET(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1) || \ + (((__EXTI_LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL)) +#endif + +#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK |\ + EXTI_REG_MASK | EXTI_PIN_MASK | EXTI_TARGET_MASK)) == 0x00UL) && \ + IS_EXTI_PROPERTY(__EXTI_LINE__) && IS_EXTI_TARGET(__EXTI_LINE__) && \ + (((__EXTI_LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK)) < \ + (((EXTI_LINE_NB / 32UL) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32UL)))) + +#define IS_EXTI_MODE(__MODE__) (((__MODE__) & ~EXTI_MODE_MASK) == 0x00UL) + +#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00UL) + +#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) (((__EXTI_LINE__) == EXTI_TRIGGER_RISING) || \ + ((__EXTI_LINE__) == EXTI_TRIGGER_FALLING)|| \ + ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)) + +#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00UL) + +#if defined(GPIOI) +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOI) || \ + ((__PORT__) == EXTI_GPIOJ) || \ + ((__PORT__) == EXTI_GPIOK)) +#else +#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ + ((__PORT__) == EXTI_GPIOB) || \ + ((__PORT__) == EXTI_GPIOC) || \ + ((__PORT__) == EXTI_GPIOD) || \ + ((__PORT__) == EXTI_GPIOE) || \ + ((__PORT__) == EXTI_GPIOF) || \ + ((__PORT__) == EXTI_GPIOG) || \ + ((__PORT__) == EXTI_GPIOH) || \ + ((__PORT__) == EXTI_GPIOJ) || \ + ((__PORT__) == EXTI_GPIOK)) +#endif /*GPIOI*/ + +#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16UL) +#if defined (LPTIM4) && defined (LPTIM5) +#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM4) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM5)) +#else +#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM2) || \ + ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM3)) +#endif /* LPTIM4 && LPTIM5 */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_Exported_Functions EXTI Exported Functions + * @brief EXTI Exported Functions + * @{ + */ + +/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions + * @brief Configuration functions + * @{ + */ +/* Configuration functions ****************************************************/ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); +/** + * @} + */ + +/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ +/* IO operation functions *****************************************************/ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_EXTI_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h new file mode 100644 index 0000000..a4773b5 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h @@ -0,0 +1,861 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_FLASH_H +#define STM32H7xx_HAL_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Procedure structure definition + */ +typedef enum +{ + FLASH_PROC_NONE = 0U, + FLASH_PROC_SECTERASE_BANK1, + FLASH_PROC_MASSERASE_BANK1, + FLASH_PROC_PROGRAM_BANK1, + FLASH_PROC_SECTERASE_BANK2, + FLASH_PROC_MASSERASE_BANK2, + FLASH_PROC_PROGRAM_BANK2, + FLASH_PROC_ALLBANK_MASSERASE +} FLASH_ProcedureTypeDef; + + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + + __IO uint32_t NbSectorsToErase; /*!< Internal variable to save the remaining sectors to erase in IT context */ + + __IO uint32_t VoltageForErase; /*!< Internal variable to provide voltage range selected by user in IT context */ + + __IO uint32_t Sector; /*!< Internal variable to define the current sector which is erasing */ + + __IO uint32_t Address; /*!< Internal variable to save address selected for program */ + + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + + __IO uint32_t ErrorCode; /*!< FLASH error code */ + +}FLASH_ProcessTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_Error_Code FLASH Error Code + * @brief FLASH Error Code + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U /*!< No error */ + +#define HAL_FLASH_ERROR_WRP FLASH_FLAG_WRPERR /*!< Write Protection Error */ +#define HAL_FLASH_ERROR_PGS FLASH_FLAG_PGSERR /*!< Program Sequence Error */ +#define HAL_FLASH_ERROR_STRB FLASH_FLAG_STRBERR /*!< Strobe Error */ +#define HAL_FLASH_ERROR_INC FLASH_FLAG_INCERR /*!< Inconsistency Error */ +#if defined (FLASH_SR_OPERR) +#define HAL_FLASH_ERROR_OPE FLASH_FLAG_OPERR /*!< Operation Error */ +#endif /* FLASH_SR_OPERR */ +#define HAL_FLASH_ERROR_RDP FLASH_FLAG_RDPERR /*!< Read Protection Error */ +#define HAL_FLASH_ERROR_RDS FLASH_FLAG_RDSERR /*!< Read Secured Error */ +#define HAL_FLASH_ERROR_SNECC FLASH_FLAG_SNECCERR /*!< ECC Single Correction Error */ +#define HAL_FLASH_ERROR_DBECC FLASH_FLAG_DBECCERR /*!< ECC Double Detection Error */ +#define HAL_FLASH_ERROR_CRCRD FLASH_FLAG_CRCRDERR /*!< CRC Read Error */ + +#define HAL_FLASH_ERROR_WRP_BANK1 FLASH_FLAG_WRPERR_BANK1 /*!< Write Protection Error on Bank 1 */ +#define HAL_FLASH_ERROR_PGS_BANK1 FLASH_FLAG_PGSERR_BANK1 /*!< Program Sequence Error on Bank 1 */ +#define HAL_FLASH_ERROR_STRB_BANK1 FLASH_FLAG_STRBERR_BANK1 /*!< Strobe Error on Bank 1 */ +#define HAL_FLASH_ERROR_INC_BANK1 FLASH_FLAG_INCERR_BANK1 /*!< Inconsistency Error on Bank 1 */ +#if defined (FLASH_SR_OPERR) +#define HAL_FLASH_ERROR_OPE_BANK1 FLASH_FLAG_OPERR_BANK1 /*!< Operation Error on Bank 1 */ +#endif /* FLASH_SR_OPERR */ +#define HAL_FLASH_ERROR_RDP_BANK1 FLASH_FLAG_RDPERR_BANK1 /*!< Read Protection Error on Bank 1 */ +#define HAL_FLASH_ERROR_RDS_BANK1 FLASH_FLAG_RDSERR_BANK1 /*!< Read Secured Error on Bank 1 */ +#define HAL_FLASH_ERROR_SNECC_BANK1 FLASH_FLAG_SNECCERR_BANK1 /*!< ECC Single Correction Error on Bank 1 */ +#define HAL_FLASH_ERROR_DBECC_BANK1 FLASH_FLAG_DBECCERR_BANK1 /*!< ECC Double Detection Error on Bank 1 */ +#define HAL_FLASH_ERROR_CRCRD_BANK1 FLASH_FLAG_CRCRDERR_BANK1 /*!< CRC Read Error on Bank1 */ + +#define HAL_FLASH_ERROR_WRP_BANK2 FLASH_FLAG_WRPERR_BANK2 /*!< Write Protection Error on Bank 2 */ +#define HAL_FLASH_ERROR_PGS_BANK2 FLASH_FLAG_PGSERR_BANK2 /*!< Program Sequence Error on Bank 2 */ +#define HAL_FLASH_ERROR_STRB_BANK2 FLASH_FLAG_STRBERR_BANK2 /*!< Strobe Error on Bank 2 */ +#define HAL_FLASH_ERROR_INC_BANK2 FLASH_FLAG_INCERR_BANK2 /*!< Inconsistency Error on Bank 2 */ +#if defined (FLASH_SR_OPERR) +#define HAL_FLASH_ERROR_OPE_BANK2 FLASH_FLAG_OPERR_BANK2 /*!< Operation Error on Bank 2 */ +#endif /* FLASH_SR_OPERR */ +#define HAL_FLASH_ERROR_RDP_BANK2 FLASH_FLAG_RDPERR_BANK2 /*!< Read Protection Error on Bank 2 */ +#define HAL_FLASH_ERROR_RDS_BANK2 FLASH_FLAG_RDSERR_BANK2 /*!< Read Secured Error on Bank 2 */ +#define HAL_FLASH_ERROR_SNECC_BANK2 FLASH_FLAG_SNECCERR_BANK2 /*!< ECC Single Correction Error on Bank 2 */ +#define HAL_FLASH_ERROR_DBECC_BANK2 FLASH_FLAG_DBECCERR_BANK2 /*!< ECC Double Detection Error on Bank 2 */ +#define HAL_FLASH_ERROR_CRCRD_BANK2 FLASH_FLAG_CRCRDERR_BANK2 /*!< CRC Read Error on Bank2 */ + +#define HAL_FLASH_ERROR_OB_CHANGE FLASH_OPTSR_OPTCHANGEERR /*!< Option Byte Change Error */ +/** + * @} + */ + +/** @defgroup FLASH_Type_Program FLASH Type Program + * @{ + */ +#define FLASH_TYPEPROGRAM_FLASHWORD 0x01U /*!< Program a flash word at a specified address */ +#if defined (FLASH_OPTCR_PG_OTP) +#define FLASH_TYPEPROGRAM_OTPWORD 0x02U /*!< Program an OTP word at a specified address */ +#endif /* FLASH_OPTCR_PG_OTP */ +/** + * @} + */ + +/** @defgroup FLASH_Flag_definition FLASH Flag definition + * @brief Flag definition + * @{ + */ +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ +#define FLASH_FLAG_WBNE FLASH_SR_WBNE /*!< Write Buffer Not Empty flag */ +#define FLASH_FLAG_QW FLASH_SR_QW /*!< Wait Queue on flag */ +#define FLASH_FLAG_CRC_BUSY FLASH_SR_CRC_BUSY /*!< CRC Busy flag */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< End Of Program on flag */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< Write Protection Error on flag */ +#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< Program Sequence Error on flag */ +#define FLASH_FLAG_STRBERR FLASH_SR_STRBERR /*!< Strobe Error flag */ +#define FLASH_FLAG_INCERR FLASH_SR_INCERR /*!< Inconsistency Error on flag */ +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< Operation Error on flag */ +#endif /* FLASH_SR_OPERR */ +#define FLASH_FLAG_RDPERR FLASH_SR_RDPERR /*!< Read Protection Error on flag */ +#define FLASH_FLAG_RDSERR FLASH_SR_RDSERR /*!< Read Secured Error on flag */ +#define FLASH_FLAG_SNECCERR FLASH_SR_SNECCERR /*!< Single ECC Error Correction on flag */ +#define FLASH_FLAG_DBECCERR FLASH_SR_DBECCERR /*!< Double Detection ECC Error on flag */ +#define FLASH_FLAG_CRCEND FLASH_SR_CRCEND /*!< CRC End of Calculation flag */ +#define FLASH_FLAG_CRCRDERR FLASH_SR_CRCRDERR /*!< CRC Read Error on bank flag */ + +#define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank 1 Busy flag */ +#define FLASH_FLAG_WBNE_BANK1 FLASH_SR_WBNE /*!< Write Buffer Not Empty on Bank 1 flag */ +#define FLASH_FLAG_QW_BANK1 FLASH_SR_QW /*!< Wait Queue on Bank 1 flag */ +#define FLASH_FLAG_CRC_BUSY_BANK1 FLASH_SR_CRC_BUSY /*!< CRC Busy on Bank 1 flag */ +#define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< End Of Program on Bank 1 flag */ +#define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPERR /*!< Write Protection Error on Bank 1 flag */ +#define FLASH_FLAG_PGSERR_BANK1 FLASH_SR_PGSERR /*!< Program Sequence Error on Bank 1 flag */ +#define FLASH_FLAG_STRBERR_BANK1 FLASH_SR_STRBERR /*!< Strobe Error on Bank 1 flag */ +#define FLASH_FLAG_INCERR_BANK1 FLASH_SR_INCERR /*!< Inconsistency Error on Bank 1 flag */ +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_OPERR_BANK1 FLASH_SR_OPERR /*!< Operation Error on Bank 1 flag */ +#endif /* FLASH_SR_OPERR */ +#define FLASH_FLAG_RDPERR_BANK1 FLASH_SR_RDPERR /*!< Read Protection Error on Bank 1 flag */ +#define FLASH_FLAG_RDSERR_BANK1 FLASH_SR_RDSERR /*!< Read Secured Error on Bank 1 flag */ +#define FLASH_FLAG_SNECCERR_BANK1 FLASH_SR_SNECCERR /*!< Single ECC Error Correction on Bank 1 flag */ +#define FLASH_FLAG_DBECCERR_BANK1 FLASH_SR_DBECCERR /*!< Double Detection ECC Error on Bank 1 flag */ +#define FLASH_FLAG_CRCEND_BANK1 FLASH_SR_CRCEND /*!< CRC End of Calculation on Bank 1 flag */ +#define FLASH_FLAG_CRCRDERR_BANK1 FLASH_SR_CRCRDERR /*!< CRC Read error on Bank 1 flag */ + +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_ALL_ERRORS_BANK1 (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | \ + FLASH_FLAG_STRBERR_BANK1 | FLASH_FLAG_INCERR_BANK1 | \ + FLASH_FLAG_OPERR_BANK1 | FLASH_FLAG_RDPERR_BANK1 | \ + FLASH_FLAG_RDSERR_BANK1 | FLASH_FLAG_SNECCERR_BANK1 | \ + FLASH_FLAG_DBECCERR_BANK1 | FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */ +#else +#define FLASH_FLAG_ALL_ERRORS_BANK1 (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | \ + FLASH_FLAG_STRBERR_BANK1 | FLASH_FLAG_INCERR_BANK1 | \ + FLASH_FLAG_RDPERR_BANK1 | FLASH_FLAG_RDSERR_BANK1 | \ + FLASH_FLAG_SNECCERR_BANK1 | FLASH_FLAG_DBECCERR_BANK1 | \ + FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */ +#endif /* FLASH_SR_OPERR */ + +#define FLASH_FLAG_ALL_BANK1 (FLASH_FLAG_BSY_BANK1 | FLASH_FLAG_WBNE_BANK1 | \ + FLASH_FLAG_QW_BANK1 | FLASH_FLAG_CRC_BUSY_BANK1 | \ + FLASH_FLAG_EOP_BANK1 | FLASH_FLAG_CRCEND_BANK1 | \ + FLASH_FLAG_ALL_ERRORS_BANK1) /*!< All Bank 1 flags */ + +#define FLASH_FLAG_BSY_BANK2 (FLASH_SR_BSY | 0x80000000U) /*!< FLASH Bank 2 Busy flag */ +#define FLASH_FLAG_WBNE_BANK2 (FLASH_SR_WBNE | 0x80000000U) /*!< Write Buffer Not Empty on Bank 2 flag */ +#define FLASH_FLAG_QW_BANK2 (FLASH_SR_QW | 0x80000000U) /*!< Wait Queue on Bank 2 flag */ +#define FLASH_FLAG_CRC_BUSY_BANK2 (FLASH_SR_CRC_BUSY | 0x80000000U) /*!< CRC Busy on Bank 2 flag */ +#define FLASH_FLAG_EOP_BANK2 (FLASH_SR_EOP | 0x80000000U) /*!< End Of Program on Bank 2 flag */ +#define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR_WRPERR | 0x80000000U) /*!< Write Protection Error on Bank 2 flag */ +#define FLASH_FLAG_PGSERR_BANK2 (FLASH_SR_PGSERR | 0x80000000U) /*!< Program Sequence Error on Bank 2 flag */ +#define FLASH_FLAG_STRBERR_BANK2 (FLASH_SR_STRBERR | 0x80000000U) /*!< Strobe Error on Bank 2 flag */ +#define FLASH_FLAG_INCERR_BANK2 (FLASH_SR_INCERR | 0x80000000U) /*!< Inconsistency Error on Bank 2 flag */ +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_OPERR_BANK2 (FLASH_SR_OPERR | 0x80000000U) /*!< Operation Error on Bank 2 flag */ +#endif /* FLASH_SR_OPERR */ +#define FLASH_FLAG_RDPERR_BANK2 (FLASH_SR_RDPERR | 0x80000000U) /*!< Read Protection Error on Bank 2 flag */ +#define FLASH_FLAG_RDSERR_BANK2 (FLASH_SR_RDSERR | 0x80000000U) /*!< Read Secured Error on Bank 2 flag */ +#define FLASH_FLAG_SNECCERR_BANK2 (FLASH_SR_SNECCERR | 0x80000000U) /*!< Single ECC Error Correction on Bank 2 flag */ +#define FLASH_FLAG_DBECCERR_BANK2 (FLASH_SR_DBECCERR | 0x80000000U) /*!< Double Detection ECC Error on Bank 2 flag */ +#define FLASH_FLAG_CRCEND_BANK2 (FLASH_SR_CRCEND | 0x80000000U) /*!< CRC End of Calculation on Bank 2 flag */ +#define FLASH_FLAG_CRCRDERR_BANK2 (FLASH_SR_CRCRDERR | 0x80000000U) /*!< CRC Read error on Bank 2 flag */ + +#if defined (FLASH_SR_OPERR) +#define FLASH_FLAG_ALL_ERRORS_BANK2 (FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | \ + FLASH_FLAG_STRBERR_BANK2 | FLASH_FLAG_INCERR_BANK2 | \ + FLASH_FLAG_OPERR_BANK2 | FLASH_FLAG_RDPERR_BANK2 | \ + FLASH_FLAG_RDSERR_BANK2 | FLASH_FLAG_SNECCERR_BANK2 | \ + FLASH_FLAG_DBECCERR_BANK2 | FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */ +#else +#define FLASH_FLAG_ALL_ERRORS_BANK2 (FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | \ + FLASH_FLAG_STRBERR_BANK2 | FLASH_FLAG_INCERR_BANK2 | \ + FLASH_FLAG_RDPERR_BANK2 | FLASH_FLAG_RDSERR_BANK2 | \ + FLASH_FLAG_SNECCERR_BANK2 | FLASH_FLAG_DBECCERR_BANK2 | \ + FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */ +#endif /* FLASH_SR_OPERR */ + +#define FLASH_FLAG_ALL_BANK2 (FLASH_FLAG_BSY_BANK2 | FLASH_FLAG_WBNE_BANK2 | \ + FLASH_FLAG_QW_BANK2 | FLASH_FLAG_CRC_BUSY_BANK2 | \ + FLASH_FLAG_EOP_BANK2 | FLASH_FLAG_CRCEND_BANK2 | \ + FLASH_FLAG_ALL_ERRORS_BANK2) /*!< All Bank 2 flags */ +/** + * @} + */ + +/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Bank 1 Operation Interrupt source */ +#define FLASH_IT_WRPERR_BANK1 FLASH_CR_WRPERRIE /*!< Write Protection Error on Bank 1 Interrupt source */ +#define FLASH_IT_PGSERR_BANK1 FLASH_CR_PGSERRIE /*!< Program Sequence Error on Bank 1 Interrupt source */ +#define FLASH_IT_STRBERR_BANK1 FLASH_CR_STRBERRIE /*!< Strobe Error on Bank 1 Interrupt source */ +#define FLASH_IT_INCERR_BANK1 FLASH_CR_INCERRIE /*!< Inconsistency Error on Bank 1 Interrupt source */ +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_OPERR_BANK1 FLASH_CR_OPERRIE /*!< Operation Error on Bank 1 Interrupt source */ +#endif /* FLASH_CR_OPERRIE */ +#define FLASH_IT_RDPERR_BANK1 FLASH_CR_RDPERRIE /*!< Read protection Error on Bank 1 Interrupt source */ +#define FLASH_IT_RDSERR_BANK1 FLASH_CR_RDSERRIE /*!< Read Secured Error on Bank 1 Interrupt source */ +#define FLASH_IT_SNECCERR_BANK1 FLASH_CR_SNECCERRIE /*!< Single ECC Error Correction on Bank 1 Interrupt source */ +#define FLASH_IT_DBECCERR_BANK1 FLASH_CR_DBECCERRIE /*!< Double Detection ECC Error on Bank 1 Interrupt source */ +#define FLASH_IT_CRCEND_BANK1 FLASH_CR_CRCENDIE /*!< CRC End on Bank 1 Interrupt source */ +#define FLASH_IT_CRCRDERR_BANK1 FLASH_CR_CRCRDERRIE /*!< CRC Read error on Bank 1 Interrupt source */ + +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_ALL_BANK1 (FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | \ + FLASH_IT_PGSERR_BANK1 | FLASH_IT_STRBERR_BANK1 | \ + FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1 | \ + FLASH_IT_RDPERR_BANK1 | FLASH_IT_RDSERR_BANK1 | \ + FLASH_IT_SNECCERR_BANK1 | FLASH_IT_DBECCERR_BANK1 | \ + FLASH_IT_CRCEND_BANK1 | FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */ +#else +#define FLASH_IT_ALL_BANK1 (FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | \ + FLASH_IT_PGSERR_BANK1 | FLASH_IT_STRBERR_BANK1 | \ + FLASH_IT_INCERR_BANK1 | FLASH_IT_RDPERR_BANK1 | \ + FLASH_IT_RDSERR_BANK1 | FLASH_IT_SNECCERR_BANK1 | \ + FLASH_IT_DBECCERR_BANK1 | FLASH_IT_CRCEND_BANK1 | \ + FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */ +#endif /* FLASH_CR_OPERRIE */ + +#define FLASH_IT_EOP_BANK2 (FLASH_CR_EOPIE | 0x80000000U) /*!< End of FLASH Bank 2 Operation Interrupt source */ +#define FLASH_IT_WRPERR_BANK2 (FLASH_CR_WRPERRIE | 0x80000000U) /*!< Write Protection Error on Bank 2 Interrupt source */ +#define FLASH_IT_PGSERR_BANK2 (FLASH_CR_PGSERRIE | 0x80000000U) /*!< Program Sequence Error on Bank 2 Interrupt source */ +#define FLASH_IT_STRBERR_BANK2 (FLASH_CR_STRBERRIE | 0x80000000U) /*!< Strobe Error on Bank 2 Interrupt source */ +#define FLASH_IT_INCERR_BANK2 (FLASH_CR_INCERRIE | 0x80000000U) /*!< Inconsistency Error on Bank 2 Interrupt source */ +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_OPERR_BANK2 (FLASH_CR_OPERRIE | 0x80000000U) /*!< Operation Error on Bank 2 Interrupt source */ +#endif /* FLASH_CR_OPERRIE */ +#define FLASH_IT_RDPERR_BANK2 (FLASH_CR_RDPERRIE | 0x80000000U) /*!< Read protection Error on Bank 2 Interrupt source */ +#define FLASH_IT_RDSERR_BANK2 (FLASH_CR_RDSERRIE | 0x80000000U) /*!< Read Secured Error on Bank 2 Interrupt source */ +#define FLASH_IT_SNECCERR_BANK2 (FLASH_CR_SNECCERRIE | 0x80000000U) /*!< Single ECC Error Correction on Bank 2 Interrupt source */ +#define FLASH_IT_DBECCERR_BANK2 (FLASH_CR_DBECCERRIE | 0x80000000U) /*!< Double Detection ECC Error on Bank 2 Interrupt source */ +#define FLASH_IT_CRCEND_BANK2 (FLASH_CR_CRCENDIE | 0x80000000U) /*!< CRC End on Bank 2 Interrupt source */ +#define FLASH_IT_CRCRDERR_BANK2 (FLASH_CR_CRCRDERRIE | 0x80000000U) /*!< CRC Read Error on Bank 2 Interrupt source */ + +#if defined (FLASH_CR_OPERRIE) +#define FLASH_IT_ALL_BANK2 (FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | \ + FLASH_IT_PGSERR_BANK2 | FLASH_IT_STRBERR_BANK2 | \ + FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2 | \ + FLASH_IT_RDPERR_BANK2 | FLASH_IT_RDSERR_BANK2 | \ + FLASH_IT_SNECCERR_BANK2 | FLASH_IT_DBECCERR_BANK2 | \ + FLASH_IT_CRCEND_BANK2 | FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */ +#else +#define FLASH_IT_ALL_BANK2 (FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | \ + FLASH_IT_PGSERR_BANK2 | FLASH_IT_STRBERR_BANK2 | \ + FLASH_IT_INCERR_BANK2 | FLASH_IT_RDPERR_BANK2 | \ + FLASH_IT_RDSERR_BANK2 | FLASH_IT_SNECCERR_BANK2 | \ + FLASH_IT_DBECCERR_BANK2 | FLASH_IT_CRCEND_BANK2 | \ + FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */ +#endif /* FLASH_CR_OPERRIE */ +/** + * @} + */ + +#if defined (FLASH_CR_PSIZE) +/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism + * @{ + */ +#define FLASH_PSIZE_BYTE 0x00000000U /*!< Flash program/erase by 8 bits */ +#define FLASH_PSIZE_HALF_WORD FLASH_CR_PSIZE_0 /*!< Flash program/erase by 16 bits */ +#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1 /*!< Flash program/erase by 32 bits */ +#define FLASH_PSIZE_DOUBLE_WORD FLASH_CR_PSIZE /*!< Flash program/erase by 64 bits */ +/** + * @} + */ +#endif /* FLASH_CR_PSIZE */ + + +/** @defgroup FLASH_Keys FLASH Keys + * @{ + */ +#define FLASH_KEY1 0x45670123U +#define FLASH_KEY2 0xCDEF89ABU +#define FLASH_OPT_KEY1 0x08192A3BU +#define FLASH_OPT_KEY2 0x4C5D6E7FU +/** + * @} + */ + +/** @defgroup FLASH_Sectors FLASH Sectors + * @{ + */ +#define FLASH_SECTOR_0 0U /*!< Sector Number 0 */ +#define FLASH_SECTOR_1 1U /*!< Sector Number 1 */ +#define FLASH_SECTOR_2 2U /*!< Sector Number 2 */ +#define FLASH_SECTOR_3 3U /*!< Sector Number 3 */ +#define FLASH_SECTOR_4 4U /*!< Sector Number 4 */ +#define FLASH_SECTOR_5 5U /*!< Sector Number 5 */ +#define FLASH_SECTOR_6 6U /*!< Sector Number 6 */ +#define FLASH_SECTOR_7 7U /*!< Sector Number 7 */ +#if (FLASH_SECTOR_TOTAL == 128) +#define FLASH_SECTOR_8 8U /*!< Sector Number 8 */ +#define FLASH_SECTOR_9 9U /*!< Sector Number 9 */ +#define FLASH_SECTOR_10 10U /*!< Sector Number 10 */ +#define FLASH_SECTOR_11 11U /*!< Sector Number 11 */ +#define FLASH_SECTOR_12 12U /*!< Sector Number 12 */ +#define FLASH_SECTOR_13 13U /*!< Sector Number 13 */ +#define FLASH_SECTOR_14 14U /*!< Sector Number 14 */ +#define FLASH_SECTOR_15 15U /*!< Sector Number 15 */ +#define FLASH_SECTOR_16 16U /*!< Sector Number 16 */ +#define FLASH_SECTOR_17 17U /*!< Sector Number 17 */ +#define FLASH_SECTOR_18 18U /*!< Sector Number 18 */ +#define FLASH_SECTOR_19 19U /*!< Sector Number 19 */ +#define FLASH_SECTOR_20 20U /*!< Sector Number 20 */ +#define FLASH_SECTOR_21 21U /*!< Sector Number 21 */ +#define FLASH_SECTOR_22 22U /*!< Sector Number 22 */ +#define FLASH_SECTOR_23 23U /*!< Sector Number 23 */ +#define FLASH_SECTOR_24 24U /*!< Sector Number 24 */ +#define FLASH_SECTOR_25 25U /*!< Sector Number 25 */ +#define FLASH_SECTOR_26 26U /*!< Sector Number 26 */ +#define FLASH_SECTOR_27 27U /*!< Sector Number 27 */ +#define FLASH_SECTOR_28 28U /*!< Sector Number 28 */ +#define FLASH_SECTOR_29 29U /*!< Sector Number 29 */ +#define FLASH_SECTOR_30 30U /*!< Sector Number 30 */ +#define FLASH_SECTOR_31 31U /*!< Sector Number 31 */ +#define FLASH_SECTOR_32 32U /*!< Sector Number 32 */ +#define FLASH_SECTOR_33 33U /*!< Sector Number 33 */ +#define FLASH_SECTOR_34 34U /*!< Sector Number 34 */ +#define FLASH_SECTOR_35 35U /*!< Sector Number 35 */ +#define FLASH_SECTOR_36 36U /*!< Sector Number 36 */ +#define FLASH_SECTOR_37 37U /*!< Sector Number 37 */ +#define FLASH_SECTOR_38 38U /*!< Sector Number 38 */ +#define FLASH_SECTOR_39 39U /*!< Sector Number 39 */ +#define FLASH_SECTOR_40 40U /*!< Sector Number 40 */ +#define FLASH_SECTOR_41 41U /*!< Sector Number 41 */ +#define FLASH_SECTOR_42 42U /*!< Sector Number 42 */ +#define FLASH_SECTOR_43 43U /*!< Sector Number 43 */ +#define FLASH_SECTOR_44 44U /*!< Sector Number 44 */ +#define FLASH_SECTOR_45 45U /*!< Sector Number 45 */ +#define FLASH_SECTOR_46 46U /*!< Sector Number 46 */ +#define FLASH_SECTOR_47 47U /*!< Sector Number 47 */ +#define FLASH_SECTOR_48 48U /*!< Sector Number 48 */ +#define FLASH_SECTOR_49 49U /*!< Sector Number 49 */ +#define FLASH_SECTOR_50 50U /*!< Sector Number 50 */ +#define FLASH_SECTOR_51 51U /*!< Sector Number 51 */ +#define FLASH_SECTOR_52 52U /*!< Sector Number 52 */ +#define FLASH_SECTOR_53 53U /*!< Sector Number 53 */ +#define FLASH_SECTOR_54 54U /*!< Sector Number 54 */ +#define FLASH_SECTOR_55 55U /*!< Sector Number 55 */ +#define FLASH_SECTOR_56 56U /*!< Sector Number 56 */ +#define FLASH_SECTOR_57 57U /*!< Sector Number 57 */ +#define FLASH_SECTOR_58 58U /*!< Sector Number 58 */ +#define FLASH_SECTOR_59 59U /*!< Sector Number 59 */ +#define FLASH_SECTOR_60 60U /*!< Sector Number 60 */ +#define FLASH_SECTOR_61 61U /*!< Sector Number 61 */ +#define FLASH_SECTOR_62 62U /*!< Sector Number 62 */ +#define FLASH_SECTOR_63 63U /*!< Sector Number 63 */ +#define FLASH_SECTOR_64 64U /*!< Sector Number 64 */ +#define FLASH_SECTOR_65 65U /*!< Sector Number 65 */ +#define FLASH_SECTOR_66 66U /*!< Sector Number 66 */ +#define FLASH_SECTOR_67 67U /*!< Sector Number 67 */ +#define FLASH_SECTOR_68 68U /*!< Sector Number 68 */ +#define FLASH_SECTOR_69 69U /*!< Sector Number 69 */ +#define FLASH_SECTOR_70 70U /*!< Sector Number 70 */ +#define FLASH_SECTOR_71 71U /*!< Sector Number 71 */ +#define FLASH_SECTOR_72 72U /*!< Sector Number 72 */ +#define FLASH_SECTOR_73 73U /*!< Sector Number 73 */ +#define FLASH_SECTOR_74 74U /*!< Sector Number 74 */ +#define FLASH_SECTOR_75 75U /*!< Sector Number 75 */ +#define FLASH_SECTOR_76 76U /*!< Sector Number 76 */ +#define FLASH_SECTOR_77 77U /*!< Sector Number 77 */ +#define FLASH_SECTOR_78 78U /*!< Sector Number 78 */ +#define FLASH_SECTOR_79 79U /*!< Sector Number 79 */ +#define FLASH_SECTOR_80 80U /*!< Sector Number 80 */ +#define FLASH_SECTOR_81 81U /*!< Sector Number 81 */ +#define FLASH_SECTOR_82 82U /*!< Sector Number 82 */ +#define FLASH_SECTOR_83 83U /*!< Sector Number 83 */ +#define FLASH_SECTOR_84 84U /*!< Sector Number 84 */ +#define FLASH_SECTOR_85 85U /*!< Sector Number 85 */ +#define FLASH_SECTOR_86 86U /*!< Sector Number 86 */ +#define FLASH_SECTOR_87 87U /*!< Sector Number 87 */ +#define FLASH_SECTOR_88 88U /*!< Sector Number 88 */ +#define FLASH_SECTOR_89 89U /*!< Sector Number 89 */ +#define FLASH_SECTOR_90 90U /*!< Sector Number 90 */ +#define FLASH_SECTOR_91 91U /*!< Sector Number 91 */ +#define FLASH_SECTOR_92 92U /*!< Sector Number 92 */ +#define FLASH_SECTOR_93 93U /*!< Sector Number 93 */ +#define FLASH_SECTOR_94 94U /*!< Sector Number 94 */ +#define FLASH_SECTOR_95 95U /*!< Sector Number 95 */ +#define FLASH_SECTOR_96 96U /*!< Sector Number 96 */ +#define FLASH_SECTOR_97 97U /*!< Sector Number 97 */ +#define FLASH_SECTOR_98 98U /*!< Sector Number 98 */ +#define FLASH_SECTOR_99 99U /*!< Sector Number 99 */ +#define FLASH_SECTOR_100 100U /*!< Sector Number 100 */ +#define FLASH_SECTOR_101 101U /*!< Sector Number 101 */ +#define FLASH_SECTOR_102 102U /*!< Sector Number 102 */ +#define FLASH_SECTOR_103 103U /*!< Sector Number 103 */ +#define FLASH_SECTOR_104 104U /*!< Sector Number 104 */ +#define FLASH_SECTOR_105 105U /*!< Sector Number 105 */ +#define FLASH_SECTOR_106 106U /*!< Sector Number 106 */ +#define FLASH_SECTOR_107 107U /*!< Sector Number 107 */ +#define FLASH_SECTOR_108 108U /*!< Sector Number 108 */ +#define FLASH_SECTOR_109 109U /*!< Sector Number 109 */ +#define FLASH_SECTOR_110 110U /*!< Sector Number 110 */ +#define FLASH_SECTOR_111 111U /*!< Sector Number 111 */ +#define FLASH_SECTOR_112 112U /*!< Sector Number 112 */ +#define FLASH_SECTOR_113 113U /*!< Sector Number 113 */ +#define FLASH_SECTOR_114 114U /*!< Sector Number 114 */ +#define FLASH_SECTOR_115 115U /*!< Sector Number 115 */ +#define FLASH_SECTOR_116 116U /*!< Sector Number 116 */ +#define FLASH_SECTOR_117 117U /*!< Sector Number 117 */ +#define FLASH_SECTOR_118 118U /*!< Sector Number 118 */ +#define FLASH_SECTOR_119 119U /*!< Sector Number 119 */ +#define FLASH_SECTOR_120 120U /*!< Sector Number 120 */ +#define FLASH_SECTOR_121 121U /*!< Sector Number 121 */ +#define FLASH_SECTOR_122 122U /*!< Sector Number 122 */ +#define FLASH_SECTOR_123 123U /*!< Sector Number 123 */ +#define FLASH_SECTOR_124 124U /*!< Sector Number 124 */ +#define FLASH_SECTOR_125 125U /*!< Sector Number 125 */ +#define FLASH_SECTOR_126 126U /*!< Sector Number 126 */ +#define FLASH_SECTOR_127 127U /*!< Sector Number 127 */ +#endif /* FLASH_SECTOR_TOTAL == 128 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @{ + */ +/** + * @brief Set the FLASH Latency. + * @param __LATENCY__: FLASH Latency + * The value of this parameter depend on device used within the same series + * @retval none + */ +#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__)) + +/** + * @brief Get the FLASH Latency. + * @retval FLASH Latency + * The value of this parameter depend on device used within the same series + */ +#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * In case of Bank 1 This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK1 : End of FLASH Bank 1 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK1 : Write Protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_PGSERR_BANK1 : Program Sequence Error on Bank 1 Interrupt source + * @arg FLASH_IT_STRBERR_BANK1 : Strobe Error on Bank 1 Interrupt source + * @arg FLASH_IT_INCERR_BANK1 : Inconsistency Error on Bank 1 Interrupt source + * @arg FLASH_IT_OPERR_BANK1 : Operation Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDPERR_BANK1 : Read protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDSERR_BANK1 : Read secure Error on Bank 1 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK1 : Single ECC Error Correction on Bank 1 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK1 : Double Detection ECC Error on Bank 1 Interrupt source + * @arg FLASH_IT_CRCEND_BANK1 : CRC End on Bank 1 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK1 : CRC Read error on Bank 1 Interrupt source + * @arg FLASH_IT_ALL_BANK1 : All Bank 1 Interrupt sources + * + * In case of Bank 2, this parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK2 : End of FLASH Bank 2 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK2 : Write Protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_PGSERR_BANK2 : Program Sequence Error on Bank 2 Interrupt source + * @arg FLASH_IT_STRBERR_BANK2 : Strobe Error on Bank 2 Interrupt source + * @arg FLASH_IT_INCERR_BANK2 : Inconsistency Error on Bank 2 Interrupt source + * @arg FLASH_IT_OPERR_BANK2 : Operation Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDPERR_BANK2 : Read protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDSERR_BANK2 : Read secure Error on Bank 2 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK2 : Single ECC Error Correction on Bank 2 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK2 : Double Detection ECC Error on Bank 2 Interrupt source + * @arg FLASH_IT_CRCEND_BANK2 : CRC End on Bank 2 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK2 : CRC Read error on Bank 2 Interrupt source + * @arg FLASH_IT_ALL_BANK2 : All Bank 2 Interrupt sources + * @retval none + */ + +#define __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) (FLASH->CR1 |= (__INTERRUPT__)) + +#define __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__) (FLASH->CR2 |= ((__INTERRUPT__) & 0x7FFFFFFFU)) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \ + __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) : \ + __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__)) +#else +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) +#endif /* DUAL_BANK */ + + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ : FLASH interrupt + * In case of Bank 1 This parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK1 : End of FLASH Bank 1 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK1 : Write Protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_PGSERR_BANK1 : Program Sequence Error on Bank 1 Interrupt source + * @arg FLASH_IT_STRBERR_BANK1 : Strobe Error on Bank 1 Interrupt source + * @arg FLASH_IT_INCERR_BANK1 : Inconsistency Error on Bank 1 Interrupt source + * @arg FLASH_IT_OPERR_BANK1 : Operation Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDPERR_BANK1 : Read protection Error on Bank 1 Interrupt source + * @arg FLASH_IT_RDSERR_BANK1 : Read secure Error on Bank 1 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK1 : Single ECC Error Correction on Bank 1 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK1 : Double Detection ECC Error on Bank 1 Interrupt source + * @arg FLASH_IT_CRCEND_BANK1 : CRC End on Bank 1 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK1 : CRC Read error on Bank 1 Interrupt source + * @arg FLASH_IT_ALL_BANK1 : All Bank 1 Interrupt sources + * + * In case of Bank 2, this parameter can be any combination of the following values: + * @arg FLASH_IT_EOP_BANK2 : End of FLASH Bank 2 Operation Interrupt source + * @arg FLASH_IT_WRPERR_BANK2 : Write Protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_PGSERR_BANK2 : Program Sequence Error on Bank 2 Interrupt source + * @arg FLASH_IT_STRBERR_BANK2 : Strobe Error on Bank 2 Interrupt source + * @arg FLASH_IT_INCERR_BANK2 : Inconsistency Error on Bank 2 Interrupt source + * @arg FLASH_IT_OPERR_BANK2 : Operation Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDPERR_BANK2 : Read protection Error on Bank 2 Interrupt source + * @arg FLASH_IT_RDSERR_BANK2 : Read secure Error on Bank 2 Interrupt source + * @arg FLASH_IT_SNECCERR_BANK2 : Single ECC Error Correction on Bank 2 Interrupt source + * @arg FLASH_IT_DBECCERR_BANK2 : Double Detection ECC Error on Bank 2 Interrupt source + * @arg FLASH_IT_CRCEND_BANK2 : CRC End on Bank 2 Interrupt source + * @arg FLASH_IT_CRCRDERR_BANK2 : CRC Read error on Bank 2 Interrupt source + * @arg FLASH_IT_ALL_BANK2 : All Bank 2 Interrupt sources + * @retval none + */ + +#define __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) (FLASH->CR1 &= ~(uint32_t)(__INTERRUPT__)) + +#define __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__) (FLASH->CR2 &= ~(uint32_t)((__INTERRUPT__) & 0x7FFFFFFFU)) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \ + __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) : \ + __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__)) +#else +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) +#endif /* DUAL_BANK */ + + +/** + * @brief Checks whether the specified FLASH flag is set or not. + * @param __FLAG__: specifies the FLASH flag to check. + * In case of Bank 1 This parameter can be one of the following values : + * @arg FLASH_FLAG_BSY_BANK1 : FLASH Bank 1 Busy flag + * @arg FLASH_FLAG_WBNE_BANK1 : Write Buffer Not Empty on Bank 1 flag + * @arg FLASH_FLAG_QW_BANK1 : Wait Queue on Bank 1 flag + * @arg FLASH_FLAG_CRC_BUSY_BANK1 : CRC module is working on Bank 1 flag + * @arg FLASH_FLAG_EOP_BANK1 : End Of Program on Bank 1 flag + * @arg FLASH_FLAG_WRPERR_BANK1 : Write Protection Error on Bank 1 flag + * @arg FLASH_FLAG_PGSERR_BANK1 : Program Sequence Error on Bank 1 flag + * @arg FLASH_FLAG_STRBER_BANK1 : Program Alignment Error on Bank 1 flag + * @arg FLASH_FLAG_INCERR_BANK1 : Inconsistency Error on Bank 1 flag + * @arg FLASH_FLAG_OPERR_BANK1 : Operation Error on Bank 1 flag + * @arg FLASH_FLAG_RDPERR_BANK1 : Read Protection Error on Bank 1 flag + * @arg FLASH_FLAG_RDSERR_BANK1 : Read secure Error on Bank 1 flag + * @arg FLASH_FLAG_SNECCE_BANK1 : Single ECC Error Correction on Bank 1 flag + * @arg FLASH_FLAG_DBECCE_BANK1 : Double Detection ECC Error on Bank 1 flag + * @arg FLASH_FLAG_CRCEND_BANK1 : CRC End on Bank 1 flag + * @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag + * + * In case of Bank 2 This parameter can be one of the following values : + * @arg FLASH_FLAG_BSY_BANK2 : FLASH Bank 2 Busy flag + * @arg FLASH_FLAG_WBNE_BANK2 : Write Buffer Not Empty on Bank 2 flag + * @arg FLASH_FLAG_QW_BANK2 : Wait Queue on Bank 2 flag + * @arg FLASH_FLAG_CRC_BUSY_BANK2 : CRC module is working on Bank 2 flag + * @arg FLASH_FLAG_EOP_BANK2 : End Of Program on Bank 2 flag + * @arg FLASH_FLAG_WRPERR_BANK2 : Write Protection Error on Bank 2 flag + * @arg FLASH_FLAG_PGSERR_BANK2 : Program Sequence Error on Bank 2 flag + * @arg FLASH_FLAG_STRBER_BANK2 : Program Alignment Error on Bank 2 flag + * @arg FLASH_FLAG_INCERR_BANK2 : Inconsistency Error on Bank 2 flag + * @arg FLASH_FLAG_OPERR_BANK2 : Operation Error on Bank 2 flag + * @arg FLASH_FLAG_RDPERR_BANK2 : Read Protection Error on Bank 2 flag + * @arg FLASH_FLAG_RDSERR_BANK2 : Read secure Error on Bank 2 flag + * @arg FLASH_FLAG_SNECCE_BANK2 : Single ECC Error Correction on Bank 2 flag + * @arg FLASH_FLAG_DBECCE_BANK2 : Double Detection ECC Error on Bank 2 flag + * @arg FLASH_FLAG_CRCEND_BANK2 : CRC End on Bank 2 flag + * @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) (READ_BIT(FLASH->SR1, (__FLAG__)) == (__FLAG__)) + +#define __HAL_FLASH_GET_FLAG_BANK2(__FLAG__) (READ_BIT(FLASH->SR2, ((__FLAG__) & 0x7FFFFFFFU)) == (((__FLAG__) & 0x7FFFFFFFU))) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_GET_FLAG(__FLAG__) (IS_FLASH_FLAG_BANK1(__FLAG__) ? __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) : \ + __HAL_FLASH_GET_FLAG_BANK2(__FLAG__)) +#else +#define __HAL_FLASH_GET_FLAG(__FLAG__) __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) +#endif /* DUAL_BANK */ + + +/** + * @brief Clear the specified FLASH flag. + * @param __FLAG__: specifies the FLASH flags to clear. + * In case of Bank 1, this parameter can be any combination of the following values: + * @arg FLASH_FLAG_EOP_BANK1 : End Of Program on Bank 1 flag + * @arg FLASH_FLAG_WRPERR_BANK1 : Write Protection Error on Bank 1 flag + * @arg FLASH_FLAG_PGSERR_BANK1 : Program Sequence Error on Bank 1 flag + * @arg FLASH_FLAG_STRBER_BANK1 : Program Alignment Error on Bank 1 flag + * @arg FLASH_FLAG_INCERR_BANK1 : Inconsistency Error on Bank 1 flag + * @arg FLASH_FLAG_OPERR_BANK1 : Operation Error on Bank 1 flag + * @arg FLASH_FLAG_RDPERR_BANK1 : Read Protection Error on Bank 1 flag + * @arg FLASH_FLAG_RDSERR_BANK1 : Read secure Error on Bank 1 flag + * @arg FLASH_FLAG_SNECCE_BANK1 : Single ECC Error Correction on Bank 1 flag + * @arg FLASH_FLAG_DBECCE_BANK1 : Double Detection ECC Error on Bank 1 flag + * @arg FLASH_FLAG_CRCEND_BANK1 : CRC End on Bank 1 flag + * @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag + * @arg FLASH_FLAG_ALL_ERRORS_BANK1 : All Bank 1 error flags + * @arg FLASH_FLAG_ALL_BANK1 : All Bank 1 flags + * + * In case of Bank 2, this parameter can be any combination of the following values : + * @arg FLASH_FLAG_EOP_BANK2 : End Of Program on Bank 2 flag + * @arg FLASH_FLAG_WRPERR_BANK2 : Write Protection Error on Bank 2 flag + * @arg FLASH_FLAG_PGSERR_BANK2 : Program Sequence Error on Bank 2 flag + * @arg FLASH_FLAG_STRBER_BANK2 : Program Alignment Error on Bank 2 flag + * @arg FLASH_FLAG_INCERR_BANK2 : Inconsistency Error on Bank 2 flag + * @arg FLASH_FLAG_OPERR_BANK2 : Operation Error on Bank 2 flag + * @arg FLASH_FLAG_RDPERR_BANK2 : Read Protection Error on Bank 2 flag + * @arg FLASH_FLAG_RDSERR_BANK2 : Read secure Error on Bank 2 flag + * @arg FLASH_FLAG_SNECCE_BANK2 : Single ECC Error Correction on Bank 2 flag + * @arg FLASH_FLAG_DBECCE_BANK2 : Double Detection ECC Error on Bank 2 flag + * @arg FLASH_FLAG_CRCEND_BANK2 : CRC End on Bank 2 flag + * @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag + * @arg FLASH_FLAG_ALL_ERRORS_BANK2 : All Bank 2 error flags + * @arg FLASH_FLAG_ALL_BANK2 : All Bank 2 flags + * @retval none + */ + +#define __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) WRITE_REG(FLASH->CCR1, (__FLAG__)) + +#define __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__) WRITE_REG(FLASH->CCR2, ((__FLAG__) & 0x7FFFFFFFU)) + +#if defined (DUAL_BANK) +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (IS_FLASH_FLAG_BANK1(__FLAG__) ? __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) : \ + __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__)) +#else +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) +#endif /* DUAL_BANK */ + +/** + * @} + */ + +/* Include FLASH HAL Extension module */ +#include "stm32h7xx_hal_flash_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +/* Program operation functions ***********************************************/ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_FLASH_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_Lock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); +/* Option bytes control */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); +/** + * @} + */ + +/** @addtogroup FLASH_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State functions ************************************************/ +uint32_t HAL_FLASH_GetError(void); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +#if defined (FLASH_OPTCR_PG_OTP) +#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD) || \ + ((VALUE) == FLASH_TYPEPROGRAM_OTPWORD)) +#else +#define IS_FLASH_TYPEPROGRAM(VALUE) ((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD) +#endif /* FLASH_OPTCR_PG_OTP */ + +#define IS_FLASH_IT_BANK1(IT) (((IT) & FLASH_IT_ALL_BANK1) == (IT)) +#if defined (DUAL_BANK) +#define IS_FLASH_IT_BANK2(IT) (((IT) & FLASH_IT_ALL_BANK2) == (IT)) +#endif /* DUAL_BANK */ + +#define IS_FLASH_FLAG_BANK1(FLAG) (((FLAG) & FLASH_FLAG_ALL_BANK1) == (FLAG)) +#if defined (DUAL_BANK) +#define IS_FLASH_FLAG_BANK2(FLAG) (((FLAG) & FLASH_FLAG_ALL_BANK2) == (FLAG)) +#endif /* DUAL_BANK */ + +#if defined (DUAL_BANK) +#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) < FLASH_BANK2_BASE)) +#define IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) (((ADDRESS) >= FLASH_BANK2_BASE ) && ((ADDRESS) <= FLASH_END)) +#else +#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) <= FLASH_END)) +#endif /* DUAL_BANK */ + +#if defined (DUAL_BANK) +#if defined (FLASH_OPTCR_PG_OTP) +#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS) (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS)) +#else +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS)) +#endif /* FLASH_OPTCR_PG_OTP */ +#else +#if defined (FLASH_OPTCR_PG_OTP) +#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS) (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \ + IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS)) +#else +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS)) +#endif /* FLASH_OPTCR_PG_OTP */ +#endif /* DUAL_BANK */ + +#define IS_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= (0x3FFF0000U)) + +#if defined (DUAL_BANK) +#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2) || \ + ((BANK) == FLASH_BANK_BOTH)) +#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \ + ((BANK) == FLASH_BANK_2)) +#else +#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1) +#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1) +#endif /* DUAL_BANK */ + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private functions + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout, uint32_t Bank); +HAL_StatusTypeDef FLASH_OB_WaitForLastOperation(uint32_t Timeout); +HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout, uint32_t Bank); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_FLASH_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h new file mode 100644 index 0000000..28bb380 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h @@ -0,0 +1,1013 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_FLASH_EX_H +#define STM32H7xx_HAL_FLASH_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or sector Erase. + This parameter can be a value of @ref FLASHEx_Type_Erase */ + + uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled + This parameter must be a value of @ref FLASH_Sectors */ + + uint32_t NbSectors; /*!< Number of sectors to be erased. + This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ + + uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism + This parameter must be a value of @ref FLASHEx_Voltage_Range */ + +} FLASH_EraseInitTypeDef; + + +/** + * @brief FLASH Option Bytes Program structure definition + */ +typedef struct +{ + uint32_t OptionType; /*!< Option byte to be configured. + This parameter can be a value of @ref FLASHEx_Option_Type */ + + uint32_t WRPState; /*!< Write protection activation or deactivation. + This parameter can be a value of @ref FLASHEx_WRP_State */ + + uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. + The value of this parameter depend on device used within the same series */ + + uint32_t RDPLevel; /*!< Set the read protection level. + This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ + + uint32_t BORLevel; /*!< Set the BOR Level. + This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ + + uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER). + This parameter can be a combination of @ref FLASHEx_OB_USER_Type */ + + uint32_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY / + IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY / IO_HSLV / SWAP_BANK_OPT */ + + uint32_t Banks; /*!< Select banks for WRP , PCROP and secure area config . + This parameter must be a value of @ref FLASHEx_Banks */ + + uint32_t PCROPConfig; /*!< specifies if the PCROP area shall be erased or not + when RDP level decreased from Level 1 to Level 0 or during a mass erase. + This parameter must be a value of @ref FLASHEx_OB_PCROP_RDP enumeration */ + + uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP). + This parameter must be a value between begin and end of a bank */ + + uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). + This parameter must be a value between PCROP Start address and end of a bank */ + + uint32_t BootConfig; /*!< Specifies if the Boot Address to be configured BOOT_ADD0, BOOT_ADD1 + or both. This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION enumeration */ + + uint32_t BootAddr0; /*!< Boot Address 0. + This parameter must be a value between begin and end of a bank */ + + uint32_t BootAddr1; /*!< Boot Address 1. + This parameter must be a value between begin and end of a bank */ +#if defined(DUAL_CORE) + uint32_t CM4BootConfig; /*!< specifies if the CM4 boot Address to be configured BOOT_ADD0, BOOT_ADD1 + or both. + This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION enumeration */ + + uint32_t CM4BootAddr0; /*!< CM4 Boot Address 0. + This parameter must be a value between begin and end of a bank */ + + uint32_t CM4BootAddr1; /*!< CM4 Boot Address 1. + This parameter must be a value between begin and end of a bank */ +#endif /*DUAL_CORE*/ + + uint32_t SecureAreaConfig; /*!< specifies if the bank secured area shall be erased or not + when RDP level decreased from Level 1 to Level 0 or during a mass erase. + This parameter must be a value of @ref FLASHEx_OB_SECURE_RDP enumeration */ + + uint32_t SecureAreaStartAddr; /*!< Bank Secure area Start address. + This parameter must be a value between begin address and end address of bank1 */ + + uint32_t SecureAreaEndAddr; /*!< Bank Secure area End address. + This parameter must be a value between Secure Area Start address and end address of a bank1 */ + +#if defined (FLASH_OTPBL_LOCKBL) + uint32_t OTPBlockLock; /*!< Specifies the OTP block(s) to be locked. + This parameter must be a value of @ref FLASHEx_OTP_Blocks */ +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) + uint32_t SharedRamConfig; /*!< Specifies the configuration of TCM / AXI shared RAM. + This parameter must be a value of @ref FLASHEx_OB_TCM_AXI_SHARED */ +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) + uint32_t FreqBoostState; /*!< Specifies the state of CPU Frequency Boost. + This parameter must be a value of @ref FLASHEx_OB_CPUFREQ_BOOST */ +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +} FLASH_OBProgramInitTypeDef; + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeCRC; /*!< CRC Selection Type. + This parameter can be a value of @ref FLASHEx_CRC_Selection_Type */ + + uint32_t BurstSize; /*!< CRC Burst Size. + This parameter can be a value of @ref FLASHEx_CRC_Burst_Size */ + + uint32_t Bank; /*!< Select bank where CRC computation is enabled. + This parameter must be FLASH_BANK_1 or FLASH_BANK_2 */ + + uint32_t Sector; /*!< Initial FLASH sector from which starts the CRC computation + This parameter must be a value of @ref FLASH_Sectors */ + + uint32_t NbSectors; /*!< Number of sectors to be computed. + This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ + + uint32_t CRCStartAddr; /*!< CRC Start address. + This parameter must be a value between begin address and end address of a bank */ + + uint32_t CRCEndAddr; /*!< CRC End address. + This parameter must be a value between CRC Start address and end address of a bank */ + +} FLASH_CRCInitTypeDef; + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASHEx_Type_Erase FLASH Type Erase + * @{ + */ +#define FLASH_TYPEERASE_SECTORS 0x00U /*!< Sectors erase only */ +#define FLASH_TYPEERASE_MASSERASE 0x01U /*!< Flash Mass erase activation */ +/** + * @} + */ + +#if defined (FLASH_CR_PSIZE) +/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range + * @{ + */ +#define FLASH_VOLTAGE_RANGE_1 0x00000000U /*!< Flash program/erase by 8 bits */ +#define FLASH_VOLTAGE_RANGE_2 FLASH_CR_PSIZE_0 /*!< Flash program/erase by 16 bits */ +#define FLASH_VOLTAGE_RANGE_3 FLASH_CR_PSIZE_1 /*!< Flash program/erase by 32 bits */ +#define FLASH_VOLTAGE_RANGE_4 FLASH_CR_PSIZE /*!< Flash program/erase by 64 bits */ +/** + * @} + */ +#endif /* FLASH_CR_PSIZE */ + +/** @defgroup FLASHEx_WRP_State FLASH WRP State + * @{ + */ +#define OB_WRPSTATE_DISABLE 0x00000000U /*!< Disable the write protection of the desired bank 1 sectors */ +#define OB_WRPSTATE_ENABLE 0x00000001U /*!< Enable the write protection of the desired bank 1 sectors */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Type FLASH Option Type + * @{ + */ +#define OPTIONBYTE_WRP 0x01U /*!< WRP option byte configuration */ +#define OPTIONBYTE_RDP 0x02U /*!< RDP option byte configuration */ +#define OPTIONBYTE_USER 0x04U /*!< USER option byte configuration */ +#define OPTIONBYTE_PCROP 0x08U /*!< PCROP option byte configuration */ +#define OPTIONBYTE_BOR 0x10U /*!< BOR option byte configuration */ +#define OPTIONBYTE_SECURE_AREA 0x20U /*!< secure area option byte configuration */ +#if defined (DUAL_CORE) +#define OPTIONBYTE_CM7_BOOTADD 0x40U /*!< CM7 BOOT ADD option byte configuration */ +#define OPTIONBYTE_CM4_BOOTADD 0x80U /*!< CM4 BOOT ADD option byte configuration */ +#define OPTIONBYTE_BOOTADD OPTIONBYTE_CM7_BOOTADD /*!< BOOT ADD option byte configuration */ +#else /* Single core */ +#define OPTIONBYTE_BOOTADD 0x40U /*!< BOOT ADD option byte configuration */ +#endif /*DUAL_CORE*/ +#if defined (FLASH_OTPBL_LOCKBL) +#define OPTIONBYTE_OTP_LOCK 0x80U /*!< OTP Lock option byte configuration */ +#endif /* FLASH_OTPBL_LOCKBL */ +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define OPTIONBYTE_SHARED_RAM 0x100U /*!< TCM / AXI Shared RAM option byte configuration */ +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +#define OPTIONBYTE_FREQ_BOOST 0x200U /*!< CPU Frequency Boost option byte configuration */ +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#if defined (DUAL_CORE) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_CM7_BOOTADD | OPTIONBYTE_CM4_BOOTADD) /*!< All option byte configuration */ +#elif defined (FLASH_OTPBL_LOCKBL) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_BOOTADD | OPTIONBYTE_OTP_LOCK) /*!< All option byte configuration */ +#elif defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_BOOTADD | OPTIONBYTE_SHARED_RAM | OPTIONBYTE_FREQ_BOOST) /*!< All option byte configuration */ +#else +#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\ + OPTIONBYTE_PCROP | OPTIONBYTE_BOR | OPTIONBYTE_SECURE_AREA |\ + OPTIONBYTE_BOOTADD) /*!< All option byte configuration */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection + * @{ + */ +#define OB_RDP_LEVEL_0 0xAA00U +#define OB_RDP_LEVEL_1 0x5500U +#define OB_RDP_LEVEL_2 0xCC00U /*!< Warning: When enabling read protection level 2 + it s no more possible to go back to level 1 or 0 */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog + * @{ + */ +#define OB_IWDG_SW OB_IWDG1_SW /*!< Software IWDG selected */ +#define OB_IWDG_HW OB_IWDG1_HW /*!< Hardware IWDG selected */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP + * @{ + */ +#define OB_STOP_NO_RST 0x40U /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST 0x00U /*!< Reset generated when entering in STOP */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY + * @{ + */ +#define OB_STDBY_NO_RST 0x80U /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST 0x00U /*!< Reset generated when entering in STANDBY */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP + * @{ + */ +#define OB_IWDG_STOP_FREEZE 0x00000000U /*!< Freeze IWDG counter in STOP mode */ +#define OB_IWDG_STOP_ACTIVE FLASH_OPTSR_FZ_IWDG_STOP /*!< IWDG counter active in STOP mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY + * @{ + */ +#define OB_IWDG_STDBY_FREEZE 0x00000000U /*!< Freeze IWDG counter in STANDBY mode */ +#define OB_IWDG_STDBY_ACTIVE FLASH_OPTSR_FZ_IWDG_SDBY /*!< IWDG counter active in STANDBY mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level + * @{ + */ +#define OB_BOR_LEVEL0 0x00000000U /*!< Reset level threshold is set to 1.6V */ +#define OB_BOR_LEVEL1 FLASH_OPTSR_BOR_LEV_0 /*!< Reset level threshold is set to 2.1V */ +#define OB_BOR_LEVEL2 FLASH_OPTSR_BOR_LEV_1 /*!< Reset level threshold is set to 2.4V */ +#define OB_BOR_LEVEL3 (FLASH_OPTSR_BOR_LEV_1 | FLASH_OPTSR_BOR_LEV_0) /*!< Reset level threshold is set to 2.7V */ +/** + * @} + */ + + + +/** @defgroup FLASHEx_Boot_Address FLASH Boot Address + * @{ + */ +#define OB_BOOTADDR_ITCM_RAM 0x0000U /*!< Boot from ITCM RAM (0x00000000) */ +#define OB_BOOTADDR_SYSTEM 0x0040U /*!< Boot from System memory bootloader (0x00100000) */ +#define OB_BOOTADDR_ITCM_FLASH 0x0080U /*!< Boot from Flash on ITCM interface (0x00200000) */ +#define OB_BOOTADDR_AXIM_FLASH 0x2000U /*!< Boot from Flash on AXIM interface (0x08000000) */ +#define OB_BOOTADDR_DTCM_RAM 0x8000U /*!< Boot from DTCM RAM (0x20000000) */ +#define OB_BOOTADDR_SRAM1 0x8004U /*!< Boot from SRAM1 (0x20010000) */ +#define OB_BOOTADDR_SRAM2 0x8013U /*!< Boot from SRAM2 (0x2004C000) */ +/** + * @} + */ + +/** @defgroup FLASH_Latency FLASH Latency + * @{ + */ +#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */ +#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */ +#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */ +#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */ +#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */ +#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */ +#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */ +#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */ + +/* Unused FLASH Latency defines */ +#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycle */ +#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycle */ +#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */ +#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */ +#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */ +#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */ +#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */ +#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */ +/** + * @} + */ + +/** @defgroup FLASHEx_Banks FLASH Banks + * @{ + */ +#define FLASH_BANK_1 0x01U /*!< Bank 1 */ +#if defined (DUAL_BANK) +#define FLASH_BANK_2 0x02U /*!< Bank 2 */ +#define FLASH_BANK_BOTH (FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */ +#endif /* DUAL_BANK */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_PCROP_RDP FLASHEx OB PCROP RDP + * @{ + */ +#define OB_PCROP_RDP_NOT_ERASE 0x00000000U /*!< PCROP area is not erased when the RDP level + is decreased from Level 1 to Level 0 or during a mass erase */ +#define OB_PCROP_RDP_ERASE FLASH_PRAR_DMEP /*!< PCROP area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase) */ + +/** + * @} + */ + +/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection + * @{ + */ +#if (FLASH_SECTOR_TOTAL == 128) +#define OB_WRP_SECTOR_0TO3 0x00000001U /*!< Write protection of Sector0 to Sector3 */ +#define OB_WRP_SECTOR_4TO7 0x00000002U /*!< Write protection of Sector4 to Sector7 */ +#define OB_WRP_SECTOR_8TO11 0x00000004U /*!< Write protection of Sector8 to Sector11 */ +#define OB_WRP_SECTOR_12TO15 0x00000008U /*!< Write protection of Sector12 to Sector15 */ +#define OB_WRP_SECTOR_16TO19 0x00000010U /*!< Write protection of Sector16 to Sector19 */ +#define OB_WRP_SECTOR_20TO23 0x00000020U /*!< Write protection of Sector20 to Sector23 */ +#define OB_WRP_SECTOR_24TO27 0x00000040U /*!< Write protection of Sector24 to Sector27 */ +#define OB_WRP_SECTOR_28TO31 0x00000080U /*!< Write protection of Sector28 to Sector31 */ +#define OB_WRP_SECTOR_32TO35 0x00000100U /*!< Write protection of Sector32 to Sector35 */ +#define OB_WRP_SECTOR_36TO39 0x00000200U /*!< Write protection of Sector36 to Sector39 */ +#define OB_WRP_SECTOR_40TO43 0x00000400U /*!< Write protection of Sector40 to Sector43 */ +#define OB_WRP_SECTOR_44TO47 0x00000800U /*!< Write protection of Sector44 to Sector47 */ +#define OB_WRP_SECTOR_48TO51 0x00001000U /*!< Write protection of Sector48 to Sector51 */ +#define OB_WRP_SECTOR_52TO55 0x00002000U /*!< Write protection of Sector52 to Sector55 */ +#define OB_WRP_SECTOR_56TO59 0x00004000U /*!< Write protection of Sector56 to Sector59 */ +#define OB_WRP_SECTOR_60TO63 0x00008000U /*!< Write protection of Sector60 to Sector63 */ +#define OB_WRP_SECTOR_64TO67 0x00010000U /*!< Write protection of Sector64 to Sector67 */ +#define OB_WRP_SECTOR_68TO71 0x00020000U /*!< Write protection of Sector68 to Sector71 */ +#define OB_WRP_SECTOR_72TO75 0x00040000U /*!< Write protection of Sector72 to Sector75 */ +#define OB_WRP_SECTOR_76TO79 0x00080000U /*!< Write protection of Sector76 to Sector79 */ +#define OB_WRP_SECTOR_80TO83 0x00100000U /*!< Write protection of Sector80 to Sector83 */ +#define OB_WRP_SECTOR_84TO87 0x00200000U /*!< Write protection of Sector84 to Sector87 */ +#define OB_WRP_SECTOR_88TO91 0x00400000U /*!< Write protection of Sector88 to Sector91 */ +#define OB_WRP_SECTOR_92TO95 0x00800000U /*!< Write protection of Sector92 to Sector95 */ +#define OB_WRP_SECTOR_96TO99 0x01000000U /*!< Write protection of Sector96 to Sector99 */ +#define OB_WRP_SECTOR_100TO103 0x02000000U /*!< Write protection of Sector100 to Sector103 */ +#define OB_WRP_SECTOR_104TO107 0x04000000U /*!< Write protection of Sector104 to Sector107 */ +#define OB_WRP_SECTOR_108TO111 0x08000000U /*!< Write protection of Sector108 to Sector111 */ +#define OB_WRP_SECTOR_112TO115 0x10000000U /*!< Write protection of Sector112 to Sector115 */ +#define OB_WRP_SECTOR_116TO119 0x20000000U /*!< Write protection of Sector116 to Sector119 */ +#define OB_WRP_SECTOR_120TO123 0x40000000U /*!< Write protection of Sector120 to Sector123 */ +#define OB_WRP_SECTOR_124TO127 0x80000000U /*!< Write protection of Sector124 to Sector127 */ +#define OB_WRP_SECTOR_ALL 0xFFFFFFFFU /*!< Write protection of all Sectors */ +#else +#define OB_WRP_SECTOR_0 0x00000001U /*!< Write protection of Sector0 */ +#define OB_WRP_SECTOR_1 0x00000002U /*!< Write protection of Sector1 */ +#define OB_WRP_SECTOR_2 0x00000004U /*!< Write protection of Sector2 */ +#define OB_WRP_SECTOR_3 0x00000008U /*!< Write protection of Sector3 */ +#define OB_WRP_SECTOR_4 0x00000010U /*!< Write protection of Sector4 */ +#define OB_WRP_SECTOR_5 0x00000020U /*!< Write protection of Sector5 */ +#define OB_WRP_SECTOR_6 0x00000040U /*!< Write protection of Sector6 */ +#define OB_WRP_SECTOR_7 0x00000080U /*!< Write protection of Sector7 */ +#define OB_WRP_SECTOR_ALL 0x000000FFU /*!< Write protection of all Sectors */ +#endif /* FLASH_SECTOR_TOTAL == 128 */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_SECURITY FLASHEx OB SECURITY + * @{ + */ +#define OB_SECURITY_DISABLE 0x00000000U /*!< security enabled */ +#define OB_SECURITY_ENABLE FLASH_OPTSR_SECURITY /*!< security disabled */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_ST_RAM_SIZE FLASHEx OB ST RAM SIZE + * @{ + */ +#define OB_ST_RAM_SIZE_2KB 0x00000000U /*!< 2 Kbytes reserved to ST code */ +#define OB_ST_RAM_SIZE_4KB FLASH_OPTSR_ST_RAM_SIZE_0 /*!< 4 Kbytes reserved to ST code */ +#define OB_ST_RAM_SIZE_8KB FLASH_OPTSR_ST_RAM_SIZE_1 /*!< 8 Kbytes reserved to ST code */ +#define OB_ST_RAM_SIZE_16KB FLASH_OPTSR_ST_RAM_SIZE /*!< 16 Kbytes reserved to ST code */ +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup FLASHEx_OB_BCM7 FLASHEx OB BCM7 + * @{ + */ +#define OB_BCM7_DISABLE 0x00000000U /*!< CM7 Boot disabled */ +#define OB_BCM7_ENABLE FLASH_OPTSR_BCM7 /*!< CM7 Boot enabled */ + +/** + * @} + */ + +/** @defgroup FLASHEx_OB_BCM4 FLASHEx OB BCM4 + * @{ + */ +#define OB_BCM4_DISABLE 0x00000000U /*!< CM4 Boot disabled */ +#define OB_BCM4_ENABLE FLASH_OPTSR_BCM4 /*!< CM4 Boot enabled */ +/** + * @} + */ +#endif /* DUAL_CORE */ + +/** @defgroup FLASHEx_OB_IWDG1_SW FLASHEx OB IWDG1 SW + * @{ + */ +#define OB_IWDG1_SW FLASH_OPTSR_IWDG1_SW /*!< Hardware independent watchdog 1 */ +#define OB_IWDG1_HW 0x00000000U /*!< Software independent watchdog 1 */ +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup FLASHEx_OB_IWDG2_SW FLASHEx OB IWDG2 SW + * @{ + */ +#define OB_IWDG2_SW FLASH_OPTSR_IWDG2_SW /*!< Hardware independent watchdog 2*/ +#define OB_IWDG2_HW 0x00000000U /*!< Software independent watchdog 2*/ +/** + * @} + */ +#endif + +/** @defgroup FLASHEx_OB_NRST_STOP_D1 FLASHEx OB NRST STOP D1 + * @{ + */ +#define OB_STOP_RST_D1 0x00000000U /*!< Reset generated when entering the D1 to stop mode */ +#define OB_STOP_NO_RST_D1 FLASH_OPTSR_NRST_STOP_D1 /*!< No reset generated when entering the D1 to stop mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_NRST_STDBY_D1 FLASHEx OB NRST STDBY D1 + * @{ + */ +#define OB_STDBY_RST_D1 0x00000000U /*!< Reset generated when entering the D1 to standby mode */ +#define OB_STDBY_NO_RST_D1 FLASH_OPTSR_NRST_STBY_D1 /*!< No reset generated when entering the D1 to standby mode */ +/** + * @} + */ + +#if defined (FLASH_OPTSR_NRST_STOP_D2) +/** @defgroup FLASHEx_OB_NRST_STOP_D2 FLASHEx OB NRST STOP D2 + * @{ + */ +#define OB_STOP_RST_D2 0x00000000U /*!< Reset generated when entering the D2 to stop mode */ +#define OB_STOP_NO_RST_D2 FLASH_OPTSR_NRST_STOP_D2 /*!< No reset generated when entering the D2 to stop mode */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_NRST_STDBY_D2 FLASHEx OB NRST STDBY D2 + * @{ + */ +#define OB_STDBY_RST_D2 0x00000000U /*!< Reset generated when entering the D2 to standby mode */ +#define OB_STDBY_NO_RST_D2 FLASH_OPTSR_NRST_STBY_D2 /*!< No reset generated when entering the D2 to standby mode */ +/** + * @} + */ +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (DUAL_BANK) +/** @defgroup FLASHEx_OB_SWAP_BANK FLASHEx OB SWAP BANK + * @{ + */ +#define OB_SWAP_BANK_DISABLE 0x00000000U /*!< Bank swap disabled */ +#define OB_SWAP_BANK_ENABLE FLASH_OPTSR_SWAP_BANK_OPT /*!< Bank swap enabled */ +/** + * @} + */ +#endif /* DUAL_BANK */ + +/** @defgroup FLASHEx_OB_IOHSLV FLASHEx OB IOHSLV + * @{ + */ +#define OB_IOHSLV_DISABLE 0x00000000U /*!< IOHSLV disabled */ +#define OB_IOHSLV_ENABLE FLASH_OPTSR_IO_HSLV /*!< IOHSLV enabled */ +/** + * @} + */ + +#if defined (FLASH_OPTSR_VDDMMC_HSLV) +/** @defgroup FLASHEx_OB_VDDMMC_HSLV FLASHEx OB VDDMMC HSLV + * @{ + */ +#define OB_VDDMMC_HSLV_DISABLE 0x00000000U /*!< VDDMMC HSLV disabled */ +#define OB_VDDMMC_HSLV_ENABLE FLASH_OPTSR_VDDMMC_HSLV /*!< VDDMMC HSLV enabled */ +/** + * @} + */ +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +/** @defgroup FLASHEx_OB_CPUFREQ_BOOST FLASHEx OB CPUFREQ BOOST + * @{ + */ +#define OB_CPUFREQ_BOOST_DISABLE 0x00000000U /*!< CPUFREQ BOOST disabled */ +#define OB_CPUFREQ_BOOST_ENABLE FLASH_OPTSR2_CPUFREQ_BOOST /*!< CPUFREQ BOOST enabled */ +/** + * @} + */ +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +/** @defgroup FLASHEx_OB_TCM_AXI_SHARED FLASHEx OB TCM AXI SHARED + * @{ + */ +#define OB_TCM_AXI_SHARED_ITCM64KB 0x00000000U /*!< 64KB ITCM / 320KB system AXI */ +#define OB_TCM_AXI_SHARED_ITCM128KB FLASH_OPTSR2_TCM_AXI_SHARED_0 /*!< 128KB ITCM / 256KB system AXI */ +#define OB_TCM_AXI_SHARED_ITCM192KB FLASH_OPTSR2_TCM_AXI_SHARED_1 /*!< 192KB ITCM / 192KB system AXI */ +#define OB_TCM_AXI_SHARED_ITCM256KB FLASH_OPTSR2_TCM_AXI_SHARED /*!< 256KB ITCM / 128KB system AXI */ +/** + * @} + */ +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + + /** @defgroup FLASHEx_OB_USER_Type FLASHEx OB USER Type + * @{ + */ +#define OB_USER_IWDG1_SW 0x0001U /*!< Independent watchdog selection */ +#define OB_USER_NRST_STOP_D1 0x0002U /*!< Reset when entering Stop mode selection*/ +#define OB_USER_NRST_STDBY_D1 0x0004U /*!< Reset when entering standby mode selection*/ +#define OB_USER_IWDG_STOP 0x0008U /*!< Independent watchdog counter freeze in stop mode */ +#define OB_USER_IWDG_STDBY 0x0010U /*!< Independent watchdog counter freeze in standby mode */ +#define OB_USER_ST_RAM_SIZE 0x0020U /*!< dedicated DTCM Ram size selection */ +#define OB_USER_SECURITY 0x0040U /*!< security selection */ +#define OB_USER_IOHSLV 0x0080U /*!< IO HSLV selection */ +#if defined (DUAL_BANK) +#define OB_USER_SWAP_BANK 0x0100U /*!< Bank swap selection */ +#endif /* DUAL_BANK */ +#if defined (FLASH_OPTSR_VDDMMC_HSLV) +#define OB_USER_VDDMMC_HSLV 0x0200U /*!< VDDMMC HSLV selection */ +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ +#if defined (DUAL_CORE) +#define OB_USER_IWDG2_SW 0x0200U /*!< Window watchdog selection */ +#define OB_USER_BCM4 0x0400U /*!< CM4 boot selection */ +#define OB_USER_BCM7 0x0800U /*!< CM7 boot selection */ +#endif /*DUAL_CORE*/ +#if defined (FLASH_OPTSR_NRST_STOP_D2) +#define OB_USER_NRST_STOP_D2 0x1000U /*!< Reset when entering Stop mode selection */ +#define OB_USER_NRST_STDBY_D2 0x2000U /*!< Reset when entering standby mode selection */ +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (DUAL_CORE) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV | OB_USER_SWAP_BANK |\ + OB_USER_IWDG2_SW | OB_USER_BCM4 | OB_USER_BCM7 |\ + OB_USER_NRST_STOP_D2 | OB_USER_NRST_STDBY_D2) +#elif defined (FLASH_OPTSR_VDDMMC_HSLV) +#if defined (DUAL_BANK) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV | OB_USER_SWAP_BANK |\ + OB_USER_VDDMMC_HSLV) +#else +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV |\ + OB_USER_VDDMMC_HSLV) +#endif /* DUAL_BANK */ +#elif defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV |\ + OB_USER_NRST_STOP_D2 | OB_USER_NRST_STDBY_D2) +#else /* Single core */ +#if defined (DUAL_BANK) +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV | OB_USER_SWAP_BANK ) +#else +#define OB_USER_ALL (OB_USER_IWDG1_SW | OB_USER_NRST_STOP_D1 | OB_USER_NRST_STDBY_D1 |\ + OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_ST_RAM_SIZE |\ + OB_USER_SECURITY | OB_USER_IOHSLV ) +#endif /* DUAL_BANK */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_BOOT_OPTION FLASHEx OB BOOT OPTION + * @{ + */ +#define OB_BOOT_ADD0 0x01U /*!< Select Boot Address 0 */ +#define OB_BOOT_ADD1 0x02U /*!< Select Boot Address 1 */ +#define OB_BOOT_ADD_BOTH 0x03U /*!< Select Boot Address 0 and 1 */ +/** + * @} + */ + +/** @defgroup FLASHEx_OB_SECURE_RDP FLASHEx OB SECURE RDP + * @{ + */ +#define OB_SECURE_RDP_NOT_ERASE 0x00000000U /*!< Secure area is not erased when the RDP level + is decreased from Level 1 to Level 0 or during a mass erase */ +#define OB_SECURE_RDP_ERASE FLASH_SCAR_DMES /*!< Secure area is erased when the RDP level is + decreased from Level 1 to Level 0 (full mass erase) */ +/** + * @} + */ + +/** @defgroup FLASHEx_CRC_Selection_Type FLASH CRC Selection Type + * @{ + */ +#define FLASH_CRC_ADDR 0x00000000U /*!< CRC selection type by address */ +#define FLASH_CRC_SECTORS FLASH_CRCCR_CRC_BY_SECT /*!< CRC selection type by sectors */ +#define FLASH_CRC_BANK (FLASH_CRCCR_ALL_BANK | FLASH_CRCCR_CRC_BY_SECT) /*!< CRC selection type by bank */ +/** + * @} + */ + +/** @defgroup FLASHEx_CRC_Burst_Size FLASH CRC Burst Size + * @{ + */ +#define FLASH_CRC_BURST_SIZE_4 0x00000000U /*!< Every burst has a size of 4 Flash words (256-bit) */ +#define FLASH_CRC_BURST_SIZE_16 FLASH_CRCCR_CRC_BURST_0 /*!< Every burst has a size of 16 Flash words (256-bit) */ +#define FLASH_CRC_BURST_SIZE_64 FLASH_CRCCR_CRC_BURST_1 /*!< Every burst has a size of 64 Flash words (256-bit) */ +#define FLASH_CRC_BURST_SIZE_256 FLASH_CRCCR_CRC_BURST /*!< Every burst has a size of 256 Flash words (256-bit) */ +/** + * @} + */ + +/** @defgroup FLASHEx_Programming_Delay FLASH Programming Delay + * @{ + */ +#define FLASH_PROGRAMMING_DELAY_0 0x00000000U /*!< programming delay set for Flash running at 70 MHz or below */ +#define FLASH_PROGRAMMING_DELAY_1 FLASH_ACR_WRHIGHFREQ_0 /*!< programming delay set for Flash running between 70 MHz and 185 MHz */ +#define FLASH_PROGRAMMING_DELAY_2 FLASH_ACR_WRHIGHFREQ_1 /*!< programming delay set for Flash running between 185 MHz and 225 MHz */ +#define FLASH_PROGRAMMING_DELAY_3 FLASH_ACR_WRHIGHFREQ /*!< programming delay set for Flash at startup */ +/** + * @} + */ + +#if defined (FLASH_OTPBL_LOCKBL) +/** @defgroup FLASHEx_OTP_Blocks FLASH OTP blocks + * @{ + */ +#define FLASH_OTP_BLOCK_0 0x00000001U /*!< OTP Block0 */ +#define FLASH_OTP_BLOCK_1 0x00000002U /*!< OTP Block1 */ +#define FLASH_OTP_BLOCK_2 0x00000004U /*!< OTP Block2 */ +#define FLASH_OTP_BLOCK_3 0x00000008U /*!< OTP Block3 */ +#define FLASH_OTP_BLOCK_4 0x00000010U /*!< OTP Block4 */ +#define FLASH_OTP_BLOCK_5 0x00000020U /*!< OTP Block5 */ +#define FLASH_OTP_BLOCK_6 0x00000040U /*!< OTP Block6 */ +#define FLASH_OTP_BLOCK_7 0x00000080U /*!< OTP Block7 */ +#define FLASH_OTP_BLOCK_8 0x00000100U /*!< OTP Block8 */ +#define FLASH_OTP_BLOCK_9 0x00000200U /*!< OTP Block9 */ +#define FLASH_OTP_BLOCK_10 0x00000400U /*!< OTP Block10 */ +#define FLASH_OTP_BLOCK_11 0x00000800U /*!< OTP Block11 */ +#define FLASH_OTP_BLOCK_12 0x00001000U /*!< OTP Block12 */ +#define FLASH_OTP_BLOCK_13 0x00002000U /*!< OTP Block13 */ +#define FLASH_OTP_BLOCK_14 0x00004000U /*!< OTP Block14 */ +#define FLASH_OTP_BLOCK_15 0x00008000U /*!< OTP Block15 */ +#define FLASH_OTP_BLOCK_ALL 0x0000FFFFU /*!< OTP All Blocks */ +/** + * @} + */ +#endif /* FLASH_OTPBL_LOCKBL */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Macros FLASH Exported Macros + * @{ + */ +/** + * @brief Calculate the FLASH Boot Base Address (BOOT_ADD0 or BOOT_ADD1) + * @note Returned value BOOT_ADDx[15:0] corresponds to boot address [29:14]. + * @param __ADDRESS__: FLASH Boot Address (in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB) + * @retval The FLASH Boot Base Address + */ +#define __HAL_FLASH_CALC_BOOT_BASE_ADR(__ADDRESS__) ((__ADDRESS__) >> 14U) + +#if defined (FLASH_CR_PSIZE) +/** + * @brief Set the FLASH Program/Erase parallelism. + * @param __PSIZE__ FLASH Program/Erase parallelism + * This parameter can be a value of @ref FLASH_Program_Parallelism + * @param __BANK__: Flash bank (FLASH_BANK_1 or FLASH_BANK_2) + * @retval none + */ +#if defined (DUAL_BANK) +#define __HAL_FLASH_SET_PSIZE(__PSIZE__, __BANK__) (((__BANK__) == FLASH_BANK_1) ? \ + MODIFY_REG(FLASH->CR1, FLASH_CR_PSIZE, (__PSIZE__)) : \ + MODIFY_REG(FLASH->CR2, FLASH_CR_PSIZE, (__PSIZE__))) +#else +#define __HAL_FLASH_SET_PSIZE(__PSIZE__, __BANK__) MODIFY_REG(FLASH->CR1, FLASH_CR_PSIZE, (__PSIZE__)) +#endif /* DUAL_BANK */ + +/** + * @brief Get the FLASH Program/Erase parallelism. + * @param __BANK__ Flash bank (FLASH_BANK_1 or FLASH_BANK_2) + * @retval FLASH Program/Erase parallelism + * This return value can be a value of @ref FLASH_Program_Parallelism + */ +#if defined (DUAL_BANK) +#define __HAL_FLASH_GET_PSIZE(__BANK__) (((__BANK__) == FLASH_BANK_1) ? \ + READ_BIT((FLASH->CR1), FLASH_CR_PSIZE) : \ + READ_BIT((FLASH->CR2), FLASH_CR_PSIZE)) +#else +#define __HAL_FLASH_GET_PSIZE(__BANK__) READ_BIT((FLASH->CR1), FLASH_CR_PSIZE) +#endif /* DUAL_BANK */ + +#endif /* FLASH_CR_PSIZE */ + +/** + * @brief Set the FLASH Programming Delay. + * @param __DELAY__ FLASH Programming Delay + * This parameter can be a value of @ref FLASHEx_Programming_Delay + * @retval none + */ +#define __HAL_FLASH_SET_PROGRAM_DELAY(__DELAY__) MODIFY_REG(FLASH->ACR, FLASH_ACR_WRHIGHFREQ, (__DELAY__)) + +/** + * @brief Get the FLASH Programming Delay. + * @retval FLASH Programming Delay + * This return value can be a value of @ref FLASHEx_Programming_Delay + */ +#define __HAL_FLASH_GET_PROGRAM_DELAY() READ_BIT(FLASH->ACR, FLASH_ACR_WRHIGHFREQ) + /** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +/* Extension Program operation functions *************************************/ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); + +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank1(void); +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank1(void); +#if defined (DUAL_BANK) +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank2(void); +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank2(void); +#endif /* DUAL_BANK */ + +HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros + * @{ + */ + +/** @defgroup FLASHEx_IS_FLASH_Definitions FLASHEx Private macros to check input parameters + * @{ + */ + +#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_SECTORS) || \ + ((VALUE) == FLASH_TYPEERASE_MASSERASE)) + +#if defined (FLASH_CR_PSIZE) +#define IS_VOLTAGERANGE(RANGE) (((RANGE) == FLASH_VOLTAGE_RANGE_1) || \ + ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \ + ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \ + ((RANGE) == FLASH_VOLTAGE_RANGE_4)) +#endif /* FLASH_CR_PSIZE */ + +#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || \ + ((VALUE) == OB_WRPSTATE_ENABLE)) + +#define IS_OPTIONBYTE(VALUE) ((((VALUE) & OPTIONBYTE_ALL) != 0U) && \ + (((VALUE) & ~OPTIONBYTE_ALL) == 0U)) + +#define IS_OB_BOOT_ADDRESS(ADDRESS) ((ADDRESS) <= 0x8013U) + +#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ + ((LEVEL) == OB_RDP_LEVEL_1) ||\ + ((LEVEL) == OB_RDP_LEVEL_2)) + +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) + +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) + +#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE)) + +#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE)) + +#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL0) || ((LEVEL) == OB_BOR_LEVEL1) || \ + ((LEVEL) == OB_BOR_LEVEL2) || ((LEVEL) == OB_BOR_LEVEL3)) + +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ + ((LATENCY) == FLASH_LATENCY_1) || \ + ((LATENCY) == FLASH_LATENCY_2) || \ + ((LATENCY) == FLASH_LATENCY_3) || \ + ((LATENCY) == FLASH_LATENCY_4) || \ + ((LATENCY) == FLASH_LATENCY_5) || \ + ((LATENCY) == FLASH_LATENCY_6) || \ + ((LATENCY) == FLASH_LATENCY_7) || \ + ((LATENCY) == FLASH_LATENCY_8) || \ + ((LATENCY) == FLASH_LATENCY_9) || \ + ((LATENCY) == FLASH_LATENCY_10) || \ + ((LATENCY) == FLASH_LATENCY_11) || \ + ((LATENCY) == FLASH_LATENCY_12) || \ + ((LATENCY) == FLASH_LATENCY_13) || \ + ((LATENCY) == FLASH_LATENCY_14) || \ + ((LATENCY) == FLASH_LATENCY_15)) + +#define IS_FLASH_SECTOR(SECTOR) ((SECTOR) < FLASH_SECTOR_TOTAL) + +#if (FLASH_SECTOR_TOTAL == 8U) +#define IS_OB_WRP_SECTOR(SECTOR) ((((SECTOR) & 0xFFFFFF00U) == 0x00000000U) && ((SECTOR) != 0x00000000U)) +#else +#define IS_OB_WRP_SECTOR(SECTOR) ((SECTOR) != 0x00000000U) +#endif /* FLASH_SECTOR_TOTAL == 8U */ + +#define IS_OB_PCROP_RDP(CONFIG) (((CONFIG) == OB_PCROP_RDP_NOT_ERASE) || \ + ((CONFIG) == OB_PCROP_RDP_ERASE)) + +#define IS_OB_SECURE_RDP(CONFIG) (((CONFIG) == OB_SECURE_RDP_NOT_ERASE) || \ + ((CONFIG) == OB_SECURE_RDP_ERASE)) + +#if defined (DUAL_BANK) +#define IS_OB_USER_SWAP_BANK(VALUE) (((VALUE) == OB_SWAP_BANK_DISABLE) || ((VALUE) == OB_SWAP_BANK_ENABLE)) +#endif /* DUAL_BANK */ + +#define IS_OB_USER_IOHSLV(VALUE) (((VALUE) == OB_IOHSLV_DISABLE) || ((VALUE) == OB_IOHSLV_ENABLE)) + +#if defined (FLASH_OPTSR_VDDMMC_HSLV) +#define IS_OB_USER_VDDMMC_HSLV(VALUE) (((VALUE) == OB_VDDMMC_HSLV_DISABLE) || ((VALUE) == OB_VDDMMC_HSLV_ENABLE)) +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ + +#define IS_OB_IWDG1_SOURCE(SOURCE) (((SOURCE) == OB_IWDG1_SW) || ((SOURCE) == OB_IWDG1_HW)) +#if defined (DUAL_CORE) +#define IS_OB_IWDG2_SOURCE(SOURCE) (((SOURCE) == OB_IWDG2_SW) || ((SOURCE) == OB_IWDG2_HW)) +#endif /* DUAL_CORE */ +#define IS_OB_STOP_D1_RESET(VALUE) (((VALUE) == OB_STOP_NO_RST_D1) || ((VALUE) == OB_STOP_RST_D1)) + +#define IS_OB_STDBY_D1_RESET(VALUE) (((VALUE) == OB_STDBY_NO_RST_D1) || ((VALUE) == OB_STDBY_RST_D1)) + +#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_ACTIVE)) + +#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_ACTIVE)) + +#define IS_OB_USER_ST_RAM_SIZE(VALUE) (((VALUE) == OB_ST_RAM_SIZE_2KB) || ((VALUE) == OB_ST_RAM_SIZE_4KB) || \ + ((VALUE) == OB_ST_RAM_SIZE_8KB) || ((VALUE) == OB_ST_RAM_SIZE_16KB)) + +#define IS_OB_USER_SECURITY(VALUE) (((VALUE) == OB_SECURITY_ENABLE) || ((VALUE) == OB_SECURITY_DISABLE)) + +#if defined (DUAL_CORE) +#define IS_OB_USER_BCM4(VALUE) (((VALUE) == OB_BCM4_DISABLE) || ((VALUE) == OB_BCM4_ENABLE)) + +#define IS_OB_USER_BCM7(VALUE) (((VALUE) == OB_BCM7_DISABLE) || ((VALUE) == OB_BCM7_ENABLE)) +#endif /* DUAL_CORE */ + +#if defined (FLASH_OPTSR_NRST_STOP_D2) +#define IS_OB_STOP_D2_RESET(VALUE) (((VALUE) == OB_STOP_NO_RST_D2) || ((VALUE) == OB_STOP_RST_D2)) + +#define IS_OB_STDBY_D2_RESET(VALUE) (((VALUE) == OB_STDBY_NO_RST_D2) || ((VALUE) == OB_STDBY_RST_D2)) +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +#define IS_OB_USER_TCM_AXI_SHARED(VALUE) (((VALUE) == OB_TCM_AXI_SHARED_ITCM64KB) || ((VALUE) == OB_TCM_AXI_SHARED_ITCM128KB) || \ + ((VALUE) == OB_TCM_AXI_SHARED_ITCM192KB) || ((VALUE) == OB_TCM_AXI_SHARED_ITCM256KB)) +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +#define IS_OB_USER_CPUFREQ_BOOST(VALUE) (((VALUE) == OB_CPUFREQ_BOOST_DISABLE) || ((VALUE) == OB_CPUFREQ_BOOST_ENABLE)) +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#define IS_OB_USER_TYPE(TYPE) ((((TYPE) & OB_USER_ALL) != 0U) && \ + (((TYPE) & ~OB_USER_ALL) == 0U)) + +#define IS_OB_BOOT_ADD_OPTION(VALUE) (((VALUE) == OB_BOOT_ADD0) || \ + ((VALUE) == OB_BOOT_ADD1) || \ + ((VALUE) == OB_BOOT_ADD_BOTH)) + +#define IS_FLASH_TYPECRC(VALUE) (((VALUE) == FLASH_CRC_ADDR) || \ + ((VALUE) == FLASH_CRC_SECTORS) || \ + ((VALUE) == FLASH_CRC_BANK)) + +#if defined (FLASH_OTPBL_LOCKBL) +#define IS_OTP_BLOCK(VALUE) ((((VALUE) & 0xFFFF0000U) == 0x00000000U) && ((VALUE) != 0x00000000U)) +#endif /* FLASH_OTPBL_LOCKBL */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_Erase_Sector(uint32_t Sector, uint32_t Banks, uint32_t VoltageRange); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_FLASH_EX_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h new file mode 100644 index 0000000..1cd9178 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h @@ -0,0 +1,359 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_GPIO_H +#define STM32H7xx_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode_define */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull_define */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed_define */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_pins_define GPIO pins define + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode_define GPIO mode define + * @brief GPIO Configuration Mode + * Elements values convention: 0x00WX00YZ + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ + +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup GPIO_speed_define GPIO speed define + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH (0x00000002U) /*!< Fast speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003U) /*!< High speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull_define GPIO pull define + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */ +#define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__)) + +#if defined(DUAL_CORE) +/** + * @brief Checks whether the specified EXTI line flag is set or not. + * @param __EXTI_LINE__: specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTID2_GET_FLAG(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending flags. + * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__)) + +/** + * @brief Checks whether the specified EXTI line is asserted or not. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTID2_GET_IT(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__)) + +/** + * @brief Clears the EXTI's line pending bits. + * @param __EXTI_LINE__: specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTID2_CLEAR_IT(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__)) +#endif + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param __EXTI_LINE__: specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__)) +/** + * @} + */ + +/* Include GPIO HAL Extension module */ +#include "stm32h7xx_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define TRIGGER_MODE_Pos 20u +#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos) +#define TRIGGER_LEVEL (0x4uL << TRIGGER_MODE_Pos) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ + ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ + ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ + ((MODE) == GPIO_MODE_AF_PP) ||\ + ((MODE) == GPIO_MODE_AF_OD) ||\ + ((MODE) == GPIO_MODE_IT_RISING) ||\ + ((MODE) == GPIO_MODE_IT_FALLING) ||\ + ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING) ||\ + ((MODE) == GPIO_MODE_EVT_FALLING) ||\ + ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((MODE) == GPIO_MODE_ANALOG)) +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \ + ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ + ((PULL) == GPIO_PULLDOWN)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIO_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_GPIO_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h new file mode 100644 index 0000000..7a8edd3 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h @@ -0,0 +1,487 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_GPIO_EX_H +#define STM32H7xx_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup GPIOEx GPIOEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection + * @{ + */ + +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ +#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ +#define GPIO_AF0_LCDBIAS ((uint8_t)0x00) /* LCDBIAS Alternate Function mapping */ +#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ +#if defined (PWR_CPUCR_PDDS_D2) /* PWR D1 and D2 domains exists */ +#define GPIO_AF0_C1DSLEEP ((uint8_t)0x00) /* Cortex-M7 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_C1SLEEP ((uint8_t)0x00) /* Cortex-M7 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_D1PWREN ((uint8_t)0x00) /* Domain 1 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_D2PWREN ((uint8_t)0x00) /* Domain 2 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above */ +#if defined(DUAL_CORE) +#define GPIO_AF0_C2DSLEEP ((uint8_t)0x00) /* Cortex-M4 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#define GPIO_AF0_C2SLEEP ((uint8_t)0x00) /* Cortex-M4 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above */ +#endif /* DUAL_CORE */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ +#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ +#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */ +#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */ +#define GPIO_AF1_LPTIM1 ((uint8_t)0x01) /* LPTIM1 Alternate Function mapping */ +#if defined(HRTIM1) +#define GPIO_AF1_HRTIM1 ((uint8_t)0x01) /* HRTIM1 Alternate Function mapping */ +#endif /* HRTIM1 */ +#if defined(SAI4) +#define GPIO_AF1_SAI4 ((uint8_t)0x01) /* SAI4 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ +#endif /* SAI4 */ +#define GPIO_AF1_FMC ((uint8_t)0x01) /* FMC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ + + +/** + * @brief AF 2 selection + */ +#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ +#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ +#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ +#define GPIO_AF2_TIM12 ((uint8_t)0x02) /* TIM12 Alternate Function mapping */ +#define GPIO_AF2_SAI1 ((uint8_t)0x02) /* SAI1 Alternate Function mapping */ +#if defined(HRTIM1) +#define GPIO_AF2_HRTIM1 ((uint8_t)0x02) /* HRTIM1 Alternate Function mapping */ +#endif /* HRTIM1 */ +#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#if defined(FDCAN3) +#define GPIO_AF2_FDCAN3 ((uint8_t)0x02) /* FDCAN3 Alternate Function mapping */ +#endif /*FDCAN3*/ + +/** + * @brief AF 3 selection + */ +#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ +#define GPIO_AF3_LPTIM2 ((uint8_t)0x03) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF3_DFSDM1 ((uint8_t)0x03) /* DFSDM Alternate Function mapping */ +#define GPIO_AF3_LPTIM3 ((uint8_t)0x03) /* LPTIM3 Alternate Function mapping */ +#define GPIO_AF3_LPTIM4 ((uint8_t)0x03) /* LPTIM4 Alternate Function mapping */ +#define GPIO_AF3_LPTIM5 ((uint8_t)0x03) /* LPTIM5 Alternate Function mapping */ +#define GPIO_AF3_LPUART ((uint8_t)0x03) /* LPUART Alternate Function mapping */ +#if defined(OCTOSPIM) +#define GPIO_AF3_OCTOSPIM_P1 ((uint8_t)0x03) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF3_OCTOSPIM_P2 ((uint8_t)0x03) /* OCTOSPI Manager Port 2 Alternate Function mapping */ +#endif /* OCTOSPIM */ +#if defined(HRTIM1) +#define GPIO_AF3_HRTIM1 ((uint8_t)0x03) /* HRTIM1 Alternate Function mapping */ +#endif /* HRTIM1 */ +#define GPIO_AF3_LTDC ((uint8_t)0x03) /* LTDC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ + +/** + * @brief AF 4 selection + */ +#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ +#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ +#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ +#define GPIO_AF4_I2C4 ((uint8_t)0x04) /* I2C4 Alternate Function mapping */ +#if defined(I2C5) +#define GPIO_AF4_I2C5 ((uint8_t)0x04) /* I2C5 Alternate Function mapping */ +#endif /* I2C5*/ +#define GPIO_AF4_TIM15 ((uint8_t)0x04) /* TIM15 Alternate Function mapping */ +#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ +#define GPIO_AF4_LPTIM2 ((uint8_t)0x04) /* LPTIM2 Alternate Function mapping */ +#define GPIO_AF4_USART1 ((uint8_t)0x04) /* USART1 Alternate Function mapping */ +#if defined(USART10) +#define GPIO_AF4_USART10 ((uint8_t)0x04) /* USART10 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ +#endif /*USART10*/ +#define GPIO_AF4_DFSDM1 ((uint8_t)0x04) /* DFSDM Alternate Function mapping */ +#if defined(DFSDM2_BASE) +#define GPIO_AF4_DFSDM2 ((uint8_t)0x04) /* DFSDM2 Alternate Function mapping */ +#endif /* DFSDM2_BASE */ +#define GPIO_AF4_DCMI ((uint8_t)0x04) /* DCMI Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#if defined(PSSI) +#define GPIO_AF4_PSSI ((uint8_t)0x04) /* PSSI Alternate Function mapping */ +#endif /* PSSI */ +#if defined(OCTOSPIM) +#define GPIO_AF4_OCTOSPIM_P1 ((uint8_t)0x04) /* OCTOSPI Manager Port 1 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 5 selection + */ +#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ +#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2 Alternate Function mapping */ +#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3 Alternate Function mapping */ +#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ +#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ +#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ +#define GPIO_AF5_CEC ((uint8_t)0x05) /* CEC Alternate Function mapping */ +#if defined(FDCAN3) +#define GPIO_AF5_FDCAN3 ((uint8_t)0x05) /* FDCAN3 Alternate Function mapping */ +#endif /*FDCAN3*/ + +/** + * @brief AF 6 selection + */ +#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2 Alternate Function mapping */ +#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3 Alternate Function mapping */ +#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ +#define GPIO_AF6_I2C4 ((uint8_t)0x06) /* I2C4 Alternate Function mapping */ +#if defined(I2C5) +#define GPIO_AF6_I2C5 ((uint8_t)0x06) /* I2C5 Alternate Function mapping */ +#endif /* I2C5*/ +#define GPIO_AF6_DFSDM1 ((uint8_t)0x06) /* DFSDM Alternate Function mapping */ +#define GPIO_AF6_UART4 ((uint8_t)0x06) /* UART4 Alternate Function mapping */ +#if defined(DFSDM2_BASE) +#define GPIO_AF6_DFSDM2 ((uint8_t)0x06) /* DFSDM2 Alternate Function mapping */ +#endif /* DFSDM2_BASE */ +#if defined(SAI3) +#define GPIO_AF6_SAI3 ((uint8_t)0x06) /* SAI3 Alternate Function mapping */ +#endif /* SAI3 */ +#if defined(OCTOSPIM) +#define GPIO_AF6_OCTOSPIM_P1 ((uint8_t)0x06) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 7 selection + */ +#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2 Alternate Function mapping */ +#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3 Alternate Function mapping */ +#define GPIO_AF7_SPI6 ((uint8_t)0x07) /* SPI6 Alternate Function mapping */ +#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ +#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ +#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ +#define GPIO_AF7_USART6 ((uint8_t)0x07) /* USART6 Alternate Function mapping */ +#define GPIO_AF7_UART7 ((uint8_t)0x07) /* UART7 Alternate Function mapping */ +#define GPIO_AF7_SDMMC1 ((uint8_t)0x07) /* SDMMC1 Alternate Function mapping */ + +/** + * @brief AF 8 selection + */ +#define GPIO_AF8_SPI6 ((uint8_t)0x08) /* SPI6 Alternate Function mapping */ +#if defined(SAI2) +#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ +#endif /*SAI2*/ +#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ +#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ +#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ +#define GPIO_AF8_SPDIF ((uint8_t)0x08) /* SPDIF Alternate Function mapping */ +#define GPIO_AF8_LPUART ((uint8_t)0x08) /* LPUART Alternate Function mapping */ +#define GPIO_AF8_SDMMC1 ((uint8_t)0x08) /* SDMMC1 Alternate Function mapping */ +#if defined(SAI4) +#define GPIO_AF8_SAI4 ((uint8_t)0x08) /* SAI4 Alternate Function mapping */ +#endif /* SAI4 */ + +/** + * @brief AF 9 selection + */ +#define GPIO_AF9_FDCAN1 ((uint8_t)0x09) /* FDCAN1 Alternate Function mapping */ +#define GPIO_AF9_FDCAN2 ((uint8_t)0x09) /* FDCAN2 Alternate Function mapping */ +#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ +#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ +#define GPIO_AF9_SDMMC2 ((uint8_t)0x09) /* SDMMC2 Alternate Function mapping */ +#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LTDC Alternate Function mapping */ +#define GPIO_AF9_SPDIF ((uint8_t)0x09) /* SPDIF Alternate Function mapping */ +#define GPIO_AF9_FMC ((uint8_t)0x09) /* FMC Alternate Function mapping */ +#if defined(QUADSPI) +#define GPIO_AF9_QUADSPI ((uint8_t)0x09) /* QUADSPI Alternate Function mapping */ +#endif /* QUADSPI */ +#if defined(SAI4) +#define GPIO_AF9_SAI4 ((uint8_t)0x09) /* SAI4 Alternate Function mapping */ +#endif /* SAI4 */ +#if defined(OCTOSPIM) +#define GPIO_AF9_OCTOSPIM_P1 ((uint8_t)0x09) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#define GPIO_AF9_OCTOSPIM_P2 ((uint8_t)0x09) /* OCTOSPI Manager Port 2 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 10 selection + */ +#if defined(SAI2) +#define GPIO_AF10_SAI2 ((uint8_t)0x0A) /* SAI2 Alternate Function mapping */ +#endif /*SAI2*/ +#define GPIO_AF10_SDMMC2 ((uint8_t)0x0A) /* SDMMC2 Alternate Function mapping */ +#if defined(USB2_OTG_FS) +#define GPIO_AF10_OTG2_FS ((uint8_t)0x0A) /* OTG2_FS Alternate Function mapping */ +#endif /*USB2_OTG_FS*/ +#define GPIO_AF10_COMP1 ((uint8_t)0x0A) /* COMP1 Alternate Function mapping */ +#define GPIO_AF10_COMP2 ((uint8_t)0x0A) /* COMP2 Alternate Function mapping */ +#if defined(LTDC) +#define GPIO_AF10_LTDC ((uint8_t)0x0A) /* LTDC Alternate Function mapping */ +#endif /*LTDC*/ +#define GPIO_AF10_CRS_SYNC ((uint8_t)0x0A) /* CRS Sync Alternate Function mapping : available on STM32H7 Rev.B and above */ +#if defined(QUADSPI) +#define GPIO_AF10_QUADSPI ((uint8_t)0x0A) /* QUADSPI Alternate Function mapping */ +#endif /* QUADSPI */ +#if defined(SAI4) +#define GPIO_AF10_SAI4 ((uint8_t)0x0A) /* SAI4 Alternate Function mapping */ +#endif /* SAI4 */ +#if !defined(USB2_OTG_FS) +#define GPIO_AF10_OTG1_FS ((uint8_t)0x0A) /* OTG1_FS Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#endif /* !USB2_OTG_FS */ +#define GPIO_AF10_OTG1_HS ((uint8_t)0x0A) /* OTG1_HS Alternate Function mapping */ +#if defined(OCTOSPIM) +#define GPIO_AF10_OCTOSPIM_P1 ((uint8_t)0x0A) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ +#define GPIO_AF10_TIM8 ((uint8_t)0x0A) /* TIM8 Alternate Function mapping */ +#define GPIO_AF10_FMC ((uint8_t)0x0A) /* FMC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ + +/** + * @brief AF 11 selection + */ +#define GPIO_AF11_SWP ((uint8_t)0x0B) /* SWP Alternate Function mapping */ +#define GPIO_AF11_MDIOS ((uint8_t)0x0B) /* MDIOS Alternate Function mapping */ +#define GPIO_AF11_UART7 ((uint8_t)0x0B) /* UART7 Alternate Function mapping */ +#define GPIO_AF11_SDMMC2 ((uint8_t)0x0B) /* SDMMC2 Alternate Function mapping */ +#define GPIO_AF11_DFSDM1 ((uint8_t)0x0B) /* DFSDM1 Alternate Function mapping */ +#define GPIO_AF11_COMP1 ((uint8_t)0x0B) /* COMP1 Alternate Function mapping */ +#define GPIO_AF11_COMP2 ((uint8_t)0x0B) /* COMP2 Alternate Function mapping */ +#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */ +#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */ +#define GPIO_AF11_I2C4 ((uint8_t)0x0B) /* I2C4 Alternate Function mapping */ +#if defined(DFSDM2_BASE) +#define GPIO_AF11_DFSDM2 ((uint8_t)0x0B) /* DFSDM2 Alternate Function mapping */ +#endif /* DFSDM2_BASE */ +#if defined(USART10) +#define GPIO_AF11_USART10 ((uint8_t)0x0B) /* USART10 Alternate Function mapping */ +#endif /* USART10 */ +#if defined(UART9) +#define GPIO_AF11_UART9 ((uint8_t)0x0B) /* UART9 Alternate Function mapping */ +#endif /* UART9 */ +#if defined(ETH) +#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETH Alternate Function mapping */ +#endif /* ETH */ +#if defined(LTDC) +#define GPIO_AF11_LTDC ((uint8_t)0x0B) /* LTDC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */ +#endif /*LTDC*/ +#if defined(OCTOSPIM) +#define GPIO_AF11_OCTOSPIM_P1 ((uint8_t)0x0B) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 12 selection + */ +#define GPIO_AF12_FMC ((uint8_t)0x0C) /* FMC Alternate Function mapping */ +#define GPIO_AF12_SDMMC1 ((uint8_t)0x0C) /* SDMMC1 Alternate Function mapping */ +#define GPIO_AF12_MDIOS ((uint8_t)0x0C) /* MDIOS Alternate Function mapping */ +#define GPIO_AF12_COMP1 ((uint8_t)0x0C) /* COMP1 Alternate Function mapping */ +#define GPIO_AF12_COMP2 ((uint8_t)0x0C) /* COMP2 Alternate Function mapping */ +#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */ +#define GPIO_AF12_TIM8 ((uint8_t)0x0C) /* TIM8 Alternate Function mapping */ +#if defined(LTDC) +#define GPIO_AF12_LTDC ((uint8_t)0x0C) /* LTDC Alternate Function mapping */ +#endif /*LTDC*/ +#if defined(USB2_OTG_FS) +#define GPIO_AF12_OTG1_FS ((uint8_t)0x0C) /* OTG1_FS Alternate Function mapping */ +#endif /* USB2_OTG_FS */ +#if defined(OCTOSPIM) +#define GPIO_AF12_OCTOSPIM_P1 ((uint8_t)0x0C) /* OCTOSPI Manager Port 1 Alternate Function mapping */ +#endif /* OCTOSPIM */ + +/** + * @brief AF 13 selection + */ +#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ +#define GPIO_AF13_COMP1 ((uint8_t)0x0D) /* COMP1 Alternate Function mapping */ +#define GPIO_AF13_COMP2 ((uint8_t)0x0D) /* COMP2 Alternate Function mapping */ +#if defined(LTDC) +#define GPIO_AF13_LTDC ((uint8_t)0x0D) /* LTDC Alternate Function mapping */ +#endif /*LTDC*/ +#if defined(DSI) +#define GPIO_AF13_DSI ((uint8_t)0x0D) /* DSI Alternate Function mapping */ +#endif /* DSI */ +#if defined(PSSI) +#define GPIO_AF13_PSSI ((uint8_t)0x0D) /* PSSI Alternate Function mapping */ +#endif /* PSSI */ +#define GPIO_AF13_TIM1 ((uint8_t)0x0D) /* TIM1 Alternate Function mapping */ +#if defined(TIM23) +#define GPIO_AF13_TIM23 ((uint8_t)0x0D) /* TIM23 Alternate Function mapping */ +#endif /*TIM23*/ + +/** + * @brief AF 14 selection + */ +#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LTDC Alternate Function mapping */ +#define GPIO_AF14_UART5 ((uint8_t)0x0E) /* UART5 Alternate Function mapping */ +#if defined(TIM24) +#define GPIO_AF14_TIM24 ((uint8_t)0x0E) /* TIM24 Alternate Function mapping */ +#endif /*TIM24*/ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0F) + + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros + * @{ + */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions + * @{ + */ +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Constants GPIO Private Constants + * @{ + */ + +/** + * @brief GPIO pin available on the platform + */ +/* Defines the available pins per GPIOs */ +#define GPIOA_PIN_AVAILABLE GPIO_PIN_All +#define GPIOB_PIN_AVAILABLE GPIO_PIN_All +#define GPIOC_PIN_AVAILABLE GPIO_PIN_All +#define GPIOD_PIN_AVAILABLE GPIO_PIN_All +#define GPIOE_PIN_AVAILABLE GPIO_PIN_All +#define GPIOF_PIN_AVAILABLE GPIO_PIN_All +#define GPIOG_PIN_AVAILABLE GPIO_PIN_All +#if defined(GPIOI) +#define GPIOI_PIN_AVAILABLE GPIO_PIN_All +#endif /*GPIOI*/ +#if defined(GPIOI) +#define GPIOJ_PIN_AVAILABLE GPIO_PIN_All +#else +#define GPIOJ_PIN_AVAILABLE (GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 ) +#endif /* GPIOI */ +#define GPIOH_PIN_AVAILABLE GPIO_PIN_All +#if defined(GPIOI) +#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \ + GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7) +#else +#define GPIOK_PIN_AVAILABLE (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 ) +#endif /* GPIOI */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Macros GPIO Private Macros + * @{ + */ +/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index + * @{ + */ +#if defined(GPIOI) +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0UL :\ + ((__GPIOx__) == (GPIOB))? 1UL :\ + ((__GPIOx__) == (GPIOC))? 2UL :\ + ((__GPIOx__) == (GPIOD))? 3UL :\ + ((__GPIOx__) == (GPIOE))? 4UL :\ + ((__GPIOx__) == (GPIOF))? 5UL :\ + ((__GPIOx__) == (GPIOG))? 6UL :\ + ((__GPIOx__) == (GPIOH))? 7UL :\ + ((__GPIOx__) == (GPIOI))? 8UL :\ + ((__GPIOx__) == (GPIOJ))? 9UL : 10UL) +#else +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0UL :\ + ((__GPIOx__) == (GPIOB))? 1UL :\ + ((__GPIOx__) == (GPIOC))? 2UL :\ + ((__GPIOx__) == (GPIOD))? 3UL :\ + ((__GPIOx__) == (GPIOE))? 4UL :\ + ((__GPIOx__) == (GPIOF))? 5UL :\ + ((__GPIOx__) == (GPIOG))? 6UL :\ + ((__GPIOx__) == (GPIOH))? 7UL :\ + ((__GPIOx__) == (GPIOJ))? 9UL : 10UL) +#endif /* GPIOI */ + +/** + * @} + */ + +/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup GPIOEx_Private_Functions GPIO Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_GPIO_EX_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h new file mode 100644 index 0000000..45f6e07 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h @@ -0,0 +1,211 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_hsem.h + * @author MCD Application Team + * @brief Header file of HSEM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_HSEM_H +#define STM32H7xx_HAL_HSEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup HSEM + * @{ + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HSEM_Exported_Macros HSEM Exported Macros + * @{ + */ + +/** + * @brief SemID to mask helper Macro. + * @param __SEMID__: semaphore ID from 0 to 31 + * @retval Semaphore Mask. + */ +#define __HAL_HSEM_SEMID_TO_MASK(__SEMID__) (1 << (__SEMID__)) + +/** + * @brief Enables the specified HSEM interrupts. + * @param __SEM_MASK__: semaphores Mask + * @retval None. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (HSEM->C1IER |= (__SEM_MASK__)) : \ + (HSEM->C2IER |= (__SEM_MASK__))) +#else +#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) (HSEM->IER |= (__SEM_MASK__)) +#endif /* DUAL_CORE */ +/** + * @brief Disables the specified HSEM interrupts. + * @param __SEM_MASK__: semaphores Mask + * @retval None. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (HSEM->C1IER &= ~(__SEM_MASK__)) : \ + (HSEM->C2IER &= ~(__SEM_MASK__))) +#else +#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) (HSEM->IER &= ~(__SEM_MASK__)) +#endif /* DUAL_CORE */ + +/** + * @brief Checks whether interrupt has occurred or not for semaphores specified by a mask. + * @param __SEM_MASK__: semaphores Mask + * @retval semaphores Mask : Semaphores where an interrupt occurred. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + ((__SEM_MASK__) & HSEM->C1MISR) : \ + ((__SEM_MASK__) & HSEM->C2MISR1)) +#else +#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((__SEM_MASK__) & HSEM->MISR) +#endif /* DUAL_CORE */ + +/** + * @brief Get the semaphores release status flags. + * @param __SEM_MASK__: semaphores Mask + * @retval semaphores Mask : Semaphores where Release flags rise. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (__SEM_MASK__) & HSEM->C1ISR : \ + (__SEM_MASK__) & HSEM->C2ISR) +#else +#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((__SEM_MASK__) & HSEM->ISR) +#endif /* DUAL_CORE */ + +/** + * @brief Clears the HSEM Interrupt flags. + * @param __SEM_MASK__: semaphores Mask + * @retval None. + */ +#if defined(DUAL_CORE) +#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \ + (HSEM->C1ICR |= (__SEM_MASK__)) : \ + (HSEM->C2ICR |= (__SEM_MASK__))) +#else +#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) (HSEM->ICR |= (__SEM_MASK__)) +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HSEM_Exported_Functions HSEM Exported Functions + * @{ + */ + +/** @addtogroup HSEM_Exported_Functions_Group1 Take and Release functions + * @brief HSEM Take and Release functions + * @{ + */ + +/* HSEM semaphore take (lock) using 2-Step method ****************************/ +HAL_StatusTypeDef HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID); +/* HSEM semaphore fast take (lock) using 1-Step method ***********************/ +HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID); +/* HSEM Release **************************************************************/ +void HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID); +/* HSEM Release All************************************************************/ +void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID); +/* HSEM Check semaphore state Taken or not **********************************/ +uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID); + +/** + * @} + */ + +/** @addtogroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions + * @brief HSEM Set and Get Key functions. + * @{ + */ +/* HSEM Set Clear Key *********************************************************/ +void HAL_HSEM_SetClearKey(uint32_t Key); +/* HSEM Get Clear Key *********************************************************/ +uint32_t HAL_HSEM_GetClearKey(void); +/** + * @} + */ + +/** @addtogroup HSEM_Exported_Functions_Group3 + * @brief HSEM Notification functions + * @{ + */ +/* HSEM Activate HSEM Notification (When a semaphore is released) ) *****************/ +void HAL_HSEM_ActivateNotification(uint32_t SemMask); +/* HSEM Deactivate HSEM Notification (When a semaphore is released) ****************/ +void HAL_HSEM_DeactivateNotification(uint32_t SemMask); +/* HSEM Free Callback (When a semaphore is released) *******************************/ +void HAL_HSEM_FreeCallback(uint32_t SemMask); +/* HSEM IRQ Handler **********************************************************/ +void HAL_HSEM_IRQHandler(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HSEM_Private_Macros HSEM Private Macros + * @{ + */ + +#define IS_HSEM_SEMID(__SEMID__) ((__SEMID__) <= HSEM_SEMID_MAX ) + +#define IS_HSEM_PROCESSID(__PROCESSID__) ((__PROCESSID__) <= HSEM_PROCESSID_MAX ) + +#define IS_HSEM_KEY(__KEY__) ((__KEY__) <= HSEM_CLEAR_KEY_MAX ) + +#if defined(DUAL_CORE) +#define IS_HSEM_COREID(__COREID__) (((__COREID__) == HSEM_CPU1_COREID) || \ + ((__COREID__) == HSEM_CPU2_COREID)) +#else +#define IS_HSEM_COREID(__COREID__) ((__COREID__) == HSEM_CPU1_COREID) +#endif + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_HSEM_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h new file mode 100644 index 0000000..f706250 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h @@ -0,0 +1,839 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_I2C_H +#define STM32H7xx_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */ + HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32h7xx_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START)) & \ + (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32h7xx_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7xx_HAL_I2C_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h new file mode 100644 index 0000000..e701b8b --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h @@ -0,0 +1,175 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_I2C_EX_H +#define STM32H7xx_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define I2C_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +#define I2C_FASTMODEPLUS_I2C1 SYSCFG_PMCR_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */ +#define I2C_FASTMODEPLUS_I2C2 SYSCFG_PMCR_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */ +#define I2C_FASTMODEPLUS_I2C3 SYSCFG_PMCR_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */ +#define I2C_FASTMODEPLUS_I2C4 SYSCFG_PMCR_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */ +#if defined(SYSCFG_PMCR_I2C5_FMP) +#define I2C_FASTMODEPLUS_I2C5 SYSCFG_PMCR_I2C5_FMP /*!< Enable Fast Mode Plus on I2C5 pins */ +#else +#define I2C_FASTMODEPLUS_I2C5 (uint32_t)(0x00001000U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C5 not supported */ +#endif /* SYSCFG_PMCR_I2C5_FMP */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_PB7) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_PB8) == I2C_FASTMODEPLUS_PB8) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_PB9) == I2C_FASTMODEPLUS_PB9) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \ + (((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32h7xx_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_I2C_EX_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h new file mode 100644 index 0000000..a39cc0d --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h @@ -0,0 +1,868 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_mdma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_MDMA_H +#define STM32H7xx_HAL_MDMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup MDMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup MDMA_Exported_Types MDMA Exported Types + * @brief MDMA Exported Types + * @{ + */ + +/** + * @brief MDMA Configuration Structure definition + */ +typedef struct +{ + + uint32_t Request; /*!< Specifies the MDMA request. + This parameter can be a value of @ref MDMA_Request_selection*/ + + uint32_t TransferTriggerMode; /*!< Specifies the Trigger Transfer mode : each request triggers a : + a buffer transfer, a block transfer, a repeated block transfer or a linked list transfer + This parameter can be a value of @ref MDMA_Transfer_TriggerMode */ + + uint32_t Priority; /*!< Specifies the software priority for the MDMAy channelx. + This parameter can be a value of @ref MDMA_Priority_level */ + + uint32_t Endianness; /*!< Specifies if the MDMA transactions preserve the Little endianness. + This parameter can be a value of @ref MDMA_Endianness */ + + uint32_t SourceInc; /*!< Specifies if the Source increment mode . + This parameter can be a value of @ref MDMA_Source_increment_mode */ + + uint32_t DestinationInc; /*!< Specifies if the Destination increment mode . + This parameter can be a value of @ref MDMA_Destination_increment_mode */ + + uint32_t SourceDataSize; /*!< Specifies the source data size. + This parameter can be a value of @ref MDMA_Source_data_size */ + + uint32_t DestDataSize; /*!< Specifies the destination data size. + This parameter can be a value of @ref MDMA_Destination_data_size */ + + + uint32_t DataAlignment; /*!< Specifies the source to destination Memory data packing/padding mode. + This parameter can be a value of @ref MDMA_data_Alignment */ + + uint32_t BufferTransferLength; /*!< Specifies the buffer Transfer Length (number of bytes), + this is the number of bytes to be transferred in a single transfer (1 byte to 128 bytes)*/ + + uint32_t SourceBurst; /*!< Specifies the Burst transfer configuration for the source memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref MDMA_Source_burst + @note : the burst may be FIXED/INCR based on SourceInc value , + the BURST must be programmed as to ensure that the burst size will be lower than than + BufferTransferLength */ + + uint32_t DestBurst; /*!< Specifies the Burst transfer configuration for the destination memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref MDMA_Destination_burst + @note : the burst may be FIXED/INCR based on DestinationInc value , + the BURST must be programmed as to ensure that the burst size will be lower than than + BufferTransferLength */ + + int32_t SourceBlockAddressOffset; /*!< this field specifies the Next block source address offset + signed value : if > 0 then increment the next block source Address by offset from where the last block ends + if < 0 then decrement the next block source Address by offset from where the last block ends + if == 0, the next block source address starts from where the last block ends + */ + + + int32_t DestBlockAddressOffset; /*!< this field specifies the Next block destination address offset + signed value : if > 0 then increment the next block destination Address by offset from where the last block ends + if < 0 then decrement the next block destination Address by offset from where the last block ends + if == 0, the next block destination address starts from where the last block ends + */ + +}MDMA_InitTypeDef; + +/** + * @brief HAL MDMA linked list node structure definition + * @note The Linked list node allows to define a new MDMA configuration + * (CTCR ,CBNDTR ,CSAR ,CDAR ,CBRUR, CLAR, CTBR, CMAR and CMDR registers). + * When CLAR register is configured to a non NULL value , each time a transfer ends, + * a new configuration (linked list node) is automatically loaded from the address given in CLAR register. + */ +typedef struct +{ + __IO uint32_t CTCR; /*!< New CTCR register configuration for the given MDMA linked list node */ + __IO uint32_t CBNDTR; /*!< New CBNDTR register configuration for the given MDMA linked list node */ + __IO uint32_t CSAR; /*!< New CSAR register configuration for the given MDMA linked list node */ + __IO uint32_t CDAR; /*!< New CDAR register configuration for the given MDMA linked list node */ + __IO uint32_t CBRUR; /*!< New CBRUR register configuration for the given MDMA linked list node */ + __IO uint32_t CLAR; /*!< New CLAR register configuration for the given MDMA linked list node */ + __IO uint32_t CTBR; /*!< New CTBR register configuration for the given MDMA linked list node */ + __IO uint32_t Reserved; /*!< Reserved register */ + __IO uint32_t CMAR; /*!< New CMAR register configuration for the given MDMA linked list node */ + __IO uint32_t CMDR; /*!< New CMDR register configuration for the given MDMA linked list node */ + +}MDMA_LinkNodeTypeDef; + +/** + * @brief HAL MDMA linked list node configuration structure definition + * @note used with HAL_MDMA_LinkedList_CreateNode function + */ +typedef struct +{ + MDMA_InitTypeDef Init; /*!< configuration of the specified MDMA Linked List Node */ + uint32_t SrcAddress; /*!< The source memory address for the Linked list Node */ + uint32_t DstAddress; /*!< The destination memory address for the Linked list Node */ + uint32_t BlockDataLength; /*!< The data length of a block in bytes */ + uint32_t BlockCount; /*!< The number of blocks to be transferred */ + + uint32_t PostRequestMaskAddress; /*!< specifies the address to be updated (written) with PostRequestMaskData after a request is served. + PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served */ + + uint32_t PostRequestMaskData; /*!< specifies the value to be written to PostRequestMaskAddress after a request is served. + PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served */ + + +}MDMA_LinkNodeConfTypeDef; + + +/** + * @brief HAL MDMA State structure definition + */ +typedef enum +{ + HAL_MDMA_STATE_RESET = 0x00U, /*!< MDMA not yet initialized or disabled */ + HAL_MDMA_STATE_READY = 0x01U, /*!< MDMA initialized and ready for use */ + HAL_MDMA_STATE_BUSY = 0x02U, /*!< MDMA process is ongoing */ + HAL_MDMA_STATE_ERROR = 0x03U, /*!< MDMA error state */ + HAL_MDMA_STATE_ABORT = 0x04U, /*!< MDMA Abort state */ + +}HAL_MDMA_StateTypeDef; + +/** + * @brief HAL MDMA Level Complete structure definition + */ +typedef enum +{ + HAL_MDMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_MDMA_BUFFER_TRANSFER = 0x01U, /*!< Buffer Transfer */ + HAL_MDMA_BLOCK_TRANSFER = 0x02U, /*!< Block Transfer */ + HAL_MDMA_REPEAT_BLOCK_TRANSFER = 0x03U /*!< repeat block Transfer */ + +}HAL_MDMA_LevelCompleteTypeDef; + +/** + * @brief HAL MDMA Callbacks IDs structure definition + */ +typedef enum +{ + HAL_MDMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_MDMA_XFER_BUFFERCPLT_CB_ID = 0x01U, /*!< Buffer Transfer */ + HAL_MDMA_XFER_BLOCKCPLT_CB_ID = 0x02U, /*!< Block Transfer */ + HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID = 0x03U, /*!< Repeated Block Transfer */ + HAL_MDMA_XFER_ERROR_CB_ID = 0x04U, /*!< Error */ + HAL_MDMA_XFER_ABORT_CB_ID = 0x05U, /*!< Abort */ + HAL_MDMA_XFER_ALL_CB_ID = 0x06U /*!< All */ + +}HAL_MDMA_CallbackIDTypeDef; + + +/** + * @brief MDMA handle Structure definition + */ +typedef struct __MDMA_HandleTypeDef +{ + MDMA_Channel_TypeDef *Instance; /*!< Register base address */ + + MDMA_InitTypeDef Init; /*!< MDMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< MDMA locking object */ + + __IO HAL_MDMA_StateTypeDef State; /*!< MDMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer complete callback */ + + void (* XferBufferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA buffer transfer complete callback */ + + void (* XferBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer complete callback */ + + void (* XferRepeatBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer repeat callback */ + + void (* XferErrorCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer error callback */ + + void (* XferAbortCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA transfer Abort callback */ + + + MDMA_LinkNodeTypeDef *FirstLinkedListNodeAddress; /*!< specifies the first node address of the transfer list + (after the initial node defined by the Init struct) + this parameter is used internally by the MDMA driver + to construct the linked list node + */ + + MDMA_LinkNodeTypeDef *LastLinkedListNodeAddress; /*!< specifies the last node address of the transfer list + this parameter is used internally by the MDMA driver + to construct the linked list node + */ + uint32_t LinkedListNodeCounter; /*!< Number of nodes in the MDMA linked list */ + + __IO uint32_t ErrorCode; /*!< MDMA Error code */ + +} MDMA_HandleTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup MDMA_Exported_Constants MDMA Exported Constants + * @brief MDMA Exported constants + * @{ + */ + +/** @defgroup MDMA_Error_Codes MDMA Error Codes + * @brief MDMA Error Codes + * @{ + */ +#define HAL_MDMA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_MDMA_ERROR_READ_XFER ((uint32_t)0x00000001U) /*!< Read Transfer error */ +#define HAL_MDMA_ERROR_WRITE_XFER ((uint32_t)0x00000002U) /*!< Write Transfer error */ +#define HAL_MDMA_ERROR_MASK_DATA ((uint32_t)0x00000004U) /*!< Error Mask Data error */ +#define HAL_MDMA_ERROR_LINKED_LIST ((uint32_t)0x00000008U) /*!< Linked list Data error */ +#define HAL_MDMA_ERROR_ALIGNMENT ((uint32_t)0x00000010U) /*!< Address/Size alignment error */ +#define HAL_MDMA_ERROR_BLOCK_SIZE ((uint32_t)0x00000020U) /*!< Block Size error */ +#define HAL_MDMA_ERROR_TIMEOUT ((uint32_t)0x00000040U) /*!< Timeout error */ +#define HAL_MDMA_ERROR_NO_XFER ((uint32_t)0x00000080U) /*!< Abort or SW trigger requested with no Xfer ongoing */ +#define HAL_MDMA_ERROR_BUSY ((uint32_t)0x00000100U) /*!< DeInit or SW trigger requested with Xfer ongoing */ + +/** + * @} + */ + +/** @defgroup MDMA_Request_selection MDMA Request selection + * @brief MDMA_Request_selection + * @{ + */ + +#define MDMA_REQUEST_DMA1_Stream0_TC ((uint32_t)0x00000000U) /*!< MDMA HW request is DMA1 Stream 0 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream1_TC ((uint32_t)0x00000001U) /*!< MDMA HW request is DMA1 Stream 1 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream2_TC ((uint32_t)0x00000002U) /*!< MDMA HW request is DMA1 Stream 2 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream3_TC ((uint32_t)0x00000003U) /*!< MDMA HW request is DMA1 Stream 3 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream4_TC ((uint32_t)0x00000004U) /*!< MDMA HW request is DMA1 Stream 4 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream5_TC ((uint32_t)0x00000005U) /*!< MDMA HW request is DMA1 Stream 5 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream6_TC ((uint32_t)0x00000006U) /*!< MDMA HW request is DMA1 Stream 6 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA1_Stream7_TC ((uint32_t)0x00000007U) /*!< MDMA HW request is DMA1 Stream 7 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream0_TC ((uint32_t)0x00000008U) /*!< MDMA HW request is DMA2 Stream 0 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream1_TC ((uint32_t)0x00000009U) /*!< MDMA HW request is DMA2 Stream 1 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream2_TC ((uint32_t)0x0000000AU) /*!< MDMA HW request is DMA2 Stream 2 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream3_TC ((uint32_t)0x0000000BU) /*!< MDMA HW request is DMA2 Stream 3 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream4_TC ((uint32_t)0x0000000CU) /*!< MDMA HW request is DMA2 Stream 4 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream5_TC ((uint32_t)0x0000000DU) /*!< MDMA HW request is DMA2 Stream 5 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream6_TC ((uint32_t)0x0000000EU) /*!< MDMA HW request is DMA2 Stream 6 Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2_Stream7_TC ((uint32_t)0x0000000FU) /*!< MDMA HW request is DMA2 Stream 7 Transfer Complete Flag */ +#if defined (LTDC) +#define MDMA_REQUEST_LTDC_LINE_IT ((uint32_t)0x00000010U) /*!< MDMA HW request is LTDC Line interrupt Flag */ +#endif /* LTDC */ +#if defined (JPEG) +#define MDMA_REQUEST_JPEG_INFIFO_TH ((uint32_t)0x00000011U) /*!< MDMA HW request is JPEG Input FIFO threshold Flag */ +#define MDMA_REQUEST_JPEG_INFIFO_NF ((uint32_t)0x00000012U) /*!< MDMA HW request is JPEG Input FIFO not full Flag */ +#define MDMA_REQUEST_JPEG_OUTFIFO_TH ((uint32_t)0x00000013U) /*!< MDMA HW request is JPEG Output FIFO threshold Flag */ +#define MDMA_REQUEST_JPEG_OUTFIFO_NE ((uint32_t)0x00000014U) /*!< MDMA HW request is JPEG Output FIFO not empty Flag */ +#define MDMA_REQUEST_JPEG_END_CONVERSION ((uint32_t)0x00000015U) /*!< MDMA HW request is JPEG End of conversion Flag */ +#endif /* JPEG */ +#if defined (OCTOSPI1) +#define MDMA_REQUEST_OCTOSPI1_FIFO_TH ((uint32_t)0x00000016U) /*!< MDMA HW request is OCTOSPI1 FIFO threshold Flag */ +#define MDMA_REQUEST_OCTOSPI1_TC ((uint32_t)0x00000017U) /*!< MDMA HW request is OCTOSPI1 Transfer complete Flag */ +#endif /* OCTOSPI1 */ +#if defined (QUADSPI) +#define MDMA_REQUEST_QUADSPI_FIFO_TH ((uint32_t)0x00000016U) /*!< MDMA HW request is QSPI FIFO threshold Flag */ +#define MDMA_REQUEST_QUADSPI_TC ((uint32_t)0x00000017U) /*!< MDMA HW request is QSPI Transfer complete Flag */ +#endif /* QUADSPI */ +#define MDMA_REQUEST_DMA2D_CLUT_TC ((uint32_t)0x00000018U) /*!< MDMA HW request is DMA2D CLUT Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2D_TC ((uint32_t)0x00000019U) /*!< MDMA HW request is DMA2D Transfer Complete Flag */ +#define MDMA_REQUEST_DMA2D_TW ((uint32_t)0x0000001AU) /*!< MDMA HW request is DMA2D Transfer Watermark Flag */ + +#if defined (DSI) +#define MDMA_REQUEST_DSI_TEARING_EFFECT ((uint32_t)0x0000001BU) /*!< MDMA HW request is DSI Tearing Effect Flag */ +#define MDMA_REQUEST_DSI_END_REFRESH ((uint32_t)0x0000001CU) /*!< MDMA HW request is DSI End of refresh Flag */ +#endif /* DSI */ + +#define MDMA_REQUEST_SDMMC1_END_DATA ((uint32_t)0x0000001DU) /*!< MDMA HW request is SDMMC1 End of Data Flag */ + +#define MDMA_REQUEST_SDMMC1_DMA_ENDBUFFER ((uint32_t)0x0000001EU) /*!< MDMA HW request is SDMMC1 Internal DMA buffer End Flag */ +#define MDMA_REQUEST_SDMMC1_COMMAND_END ((uint32_t)0x0000001FU) /*!< MDMA HW request is SDMMC1 Command End Flag */ + +#if defined (OCTOSPI2) +#define MDMA_REQUEST_OCTOSPI2_FIFO_TH ((uint32_t)0x00000020U) /*!< MDMA HW request is OCTOSPI2 FIFO threshold Flag */ +#define MDMA_REQUEST_OCTOSPI2_TC ((uint32_t)0x00000021U) /*!< MDMA HW request is OCTOSPI2 Transfer complete Flag */ +#endif /* OCTOSPI2 */ + +#define MDMA_REQUEST_SW ((uint32_t)0x40000000U) /*!< MDMA SW request */ + +/** + * @} + */ + +/** @defgroup MDMA_Transfer_TriggerMode MDMA Transfer Trigger Mode + * @brief MDMA Transfer Trigger Mode + * @{ + */ +#define MDMA_BUFFER_TRANSFER ((uint32_t)0x00000000U) /*!< Each MDMA request (SW or HW) triggers a buffer transfer */ +#define MDMA_BLOCK_TRANSFER ((uint32_t)MDMA_CTCR_TRGM_0) /*!< Each MDMA request (SW or HW) triggers a block transfer */ +#define MDMA_REPEAT_BLOCK_TRANSFER ((uint32_t)MDMA_CTCR_TRGM_1) /*!< Each MDMA request (SW or HW) triggers a repeated block transfer */ +#define MDMA_FULL_TRANSFER ((uint32_t)MDMA_CTCR_TRGM) /*!< Each MDMA request (SW or HW) triggers a Full transfer or a linked list transfer if any */ + +/** + * @} + */ + +/** @defgroup MDMA_Priority_level MDMA Priority level + * @brief MDMA Priority level + * @{ + */ +#define MDMA_PRIORITY_LOW ((uint32_t)0x00000000U) /*!< Priority level: Low */ +#define MDMA_PRIORITY_MEDIUM ((uint32_t)MDMA_CCR_PL_0) /*!< Priority level: Medium */ +#define MDMA_PRIORITY_HIGH ((uint32_t)MDMA_CCR_PL_1) /*!< Priority level: High */ +#define MDMA_PRIORITY_VERY_HIGH ((uint32_t)MDMA_CCR_PL) /*!< Priority level: Very High */ + +/** + * @} + */ + + +/** @defgroup MDMA_Endianness MDMA Endianness + * @brief MDMA Endianness + * @{ + */ +#define MDMA_LITTLE_ENDIANNESS_PRESERVE ((uint32_t)0x00000000U) /*!< little endianness preserve */ +#define MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_BEX) /*!< BYTEs endianness exchange when destination data size is > Byte */ +#define MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_HEX) /*!< HALF WORDs endianness exchange when destination data size is > HALF WORD */ +#define MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_WEX) /*!< WORDs endianness exchange when destination data size is > DOUBLE WORD */ + +/** + * @} + */ + +/** @defgroup MDMA_Source_increment_mode MDMA Source increment mode + * @brief MDMA Source increment mode + * @{ + */ +#define MDMA_SRC_INC_DISABLE ((uint32_t)0x00000000U) /*!< Source address pointer is fixed */ +#define MDMA_SRC_INC_BYTE ((uint32_t)MDMA_CTCR_SINC_1) /*!< Source address pointer is incremented by a BYTE (8 bits) */ +#define MDMA_SRC_INC_HALFWORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits) */ +#define MDMA_SRC_INC_WORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits) */ +#define MDMA_SRC_INC_DOUBLEWORD ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS) /*!< Source address pointer is incremented by a double Word (64 bits)) */ +#define MDMA_SRC_DEC_BYTE ((uint32_t)MDMA_CTCR_SINC) /*!< Source address pointer is decremented by a BYTE (8 bits) */ +#define MDMA_SRC_DEC_HALFWORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is decremented by a half Word (16 bits) */ +#define MDMA_SRC_DEC_WORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is decremented by a Word (32 bits) */ +#define MDMA_SRC_DEC_DOUBLEWORD ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS) /*!< Source address pointer is decremented by a double Word (64 bits)) */ + +/** + * @} + */ + +/** @defgroup MDMA_Destination_increment_mode MDMA Destination increment mode + * @brief MDMA Destination increment mode + * @{ + */ +#define MDMA_DEST_INC_DISABLE ((uint32_t)0x00000000U) /*!< Source address pointer is fixed */ +#define MDMA_DEST_INC_BYTE ((uint32_t)MDMA_CTCR_DINC_1) /*!< Source address pointer is incremented by a BYTE (8 bits) */ +#define MDMA_DEST_INC_HALFWORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits) */ +#define MDMA_DEST_INC_WORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits) */ +#define MDMA_DEST_INC_DOUBLEWORD ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS) /*!< Source address pointer is incremented by a double Word (64 bits)) */ +#define MDMA_DEST_DEC_BYTE ((uint32_t)MDMA_CTCR_DINC) /*!< Source address pointer is decremented by a BYTE (8 bits) */ +#define MDMA_DEST_DEC_HALFWORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is decremented by a half Word (16 bits) */ +#define MDMA_DEST_DEC_WORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is decremented by a Word (32 bits) */ +#define MDMA_DEST_DEC_DOUBLEWORD ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS) /*!< Source address pointer is decremented by a double Word (64 bits)) */ + +/** + * @} + */ + +/** @defgroup MDMA_Source_data_size MDMA Source data size + * @brief MDMA Source data size + * @{ + */ +#define MDMA_SRC_DATASIZE_BYTE ((uint32_t)0x00000000U) /*!< Source data size is Byte */ +#define MDMA_SRC_DATASIZE_HALFWORD ((uint32_t)MDMA_CTCR_SSIZE_0) /*!< Source data size is half word */ +#define MDMA_SRC_DATASIZE_WORD ((uint32_t)MDMA_CTCR_SSIZE_1) /*!< Source data size is word */ +#define MDMA_SRC_DATASIZE_DOUBLEWORD ((uint32_t)MDMA_CTCR_SSIZE) /*!< Source data size is double word */ + +/** + * @} + */ + +/** @defgroup MDMA_Destination_data_size MDMA Destination data size + * @brief MDMA Destination data size + * @{ + */ +#define MDMA_DEST_DATASIZE_BYTE ((uint32_t)0x00000000U) /*!< Destination data size is Byte */ +#define MDMA_DEST_DATASIZE_HALFWORD ((uint32_t)MDMA_CTCR_DSIZE_0) /*!< Destination data size is half word */ +#define MDMA_DEST_DATASIZE_WORD ((uint32_t)MDMA_CTCR_DSIZE_1) /*!< Destination data size is word */ +#define MDMA_DEST_DATASIZE_DOUBLEWORD ((uint32_t)MDMA_CTCR_DSIZE) /*!< Destination data size is double word */ + +/** + * @} + */ + +/** @defgroup MDMA_data_Alignment MDMA data alignment + * @brief MDMA data alignment + * @{ + */ +#define MDMA_DATAALIGN_PACKENABLE ((uint32_t)MDMA_CTCR_PKE) /*!< The source data is packed/un-packed into the destination data size + All data are right aligned, in Little Endien mode. */ +#define MDMA_DATAALIGN_RIGHT ((uint32_t)0x00000000U) /*!< Right Aligned, padded w/ 0s (default) */ +#define MDMA_DATAALIGN_RIGHT_SIGNED ((uint32_t)MDMA_CTCR_PAM_0) /*!< Right Aligned, Sign extended , + Note : this mode is allowed only if the Source data size is smaller than Destination data size */ +#define MDMA_DATAALIGN_LEFT ((uint32_t)MDMA_CTCR_PAM_1) /*!< Left Aligned (padded with 0s) */ + +/** + * @} + */ + +/** @defgroup MDMA_Source_burst MDMA Source burst + * @brief MDMA Source burst + * @{ + */ +#define MDMA_SOURCE_BURST_SINGLE ((uint32_t)0x00000000U) /*!< single transfer */ +#define MDMA_SOURCE_BURST_2BEATS ((uint32_t)MDMA_CTCR_SBURST_0) /*!< Burst 2 beats */ +#define MDMA_SOURCE_BURST_4BEATS ((uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 4 beats */ +#define MDMA_SOURCE_BURST_8BEATS ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 8 beats */ +#define MDMA_SOURCE_BURST_16BEATS ((uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 16 beats */ +#define MDMA_SOURCE_BURST_32BEATS ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 32 beats */ +#define MDMA_SOURCE_BURST_64BEATS ((uint32_t)MDMA_CTCR_SBURST_1 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 64 beats */ +#define MDMA_SOURCE_BURST_128BEATS ((uint32_t)MDMA_CTCR_SBURST) /*!< Burst 128 beats */ + +/** + * @} + */ + +/** @defgroup MDMA_Destination_burst MDMA Destination burst + * @brief MDMA Destination burst + * @{ + */ +#define MDMA_DEST_BURST_SINGLE ((uint32_t)0x00000000U) /*!< single transfer */ +#define MDMA_DEST_BURST_2BEATS ((uint32_t)MDMA_CTCR_DBURST_0) /*!< Burst 2 beats */ +#define MDMA_DEST_BURST_4BEATS ((uint32_t)MDMA_CTCR_DBURST_1) /*!< Burst 4 beats */ +#define MDMA_DEST_BURST_8BEATS ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_1) /*!< Burst 8 beats */ +#define MDMA_DEST_BURST_16BEATS ((uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 16 beats */ +#define MDMA_DEST_BURST_32BEATS ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 32 beats */ +#define MDMA_DEST_BURST_64BEATS ((uint32_t)MDMA_CTCR_DBURST_1 | (uint32_t)MDMA_CTCR_DBURST_2) /*!< Burst 64 beats */ +#define MDMA_DEST_BURST_128BEATS ((uint32_t)MDMA_CTCR_DBURST) /*!< Burst 128 beats */ + +/** + * @} + */ + +/** @defgroup MDMA_interrupt_enable_definitions MDMA interrupt enable definitions + * @brief MDMA interrupt enable definitions + * @{ + */ +#define MDMA_IT_TE ((uint32_t)MDMA_CCR_TEIE) /*!< Transfer Error interrupt */ +#define MDMA_IT_CTC ((uint32_t)MDMA_CCR_CTCIE) /*!< Channel Transfer Complete interrupt */ +#define MDMA_IT_BRT ((uint32_t)MDMA_CCR_BRTIE) /*!< Block Repeat Transfer interrupt */ +#define MDMA_IT_BT ((uint32_t)MDMA_CCR_BTIE) /*!< Block Transfer interrupt */ +#define MDMA_IT_BFTC ((uint32_t)MDMA_CCR_TCIE) /*!< Buffer Transfer Complete interrupt */ + +/** + * @} + */ + +/** @defgroup MDMA_flag_definitions MDMA flag definitions + * @brief MDMA flag definitions + * @{ + */ +#define MDMA_FLAG_TE ((uint32_t)MDMA_CISR_TEIF) /*!< Transfer Error flag */ +#define MDMA_FLAG_CTC ((uint32_t)MDMA_CISR_CTCIF) /*!< Channel Transfer Complete flag */ +#define MDMA_FLAG_BRT ((uint32_t)MDMA_CISR_BRTIF) /*!< Block Repeat Transfer complete flag */ +#define MDMA_FLAG_BT ((uint32_t)MDMA_CISR_BTIF) /*!< Block Transfer complete flag */ +#define MDMA_FLAG_BFTC ((uint32_t)MDMA_CISR_TCIF) /*!< BuFfer Transfer complete flag */ +#define MDMA_FLAG_CRQA ((uint32_t)MDMA_CISR_CRQA) /*!< Channel request Active flag */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup MDMA_Exported_Macros MDMA Exported Macros + * @{ + */ + +/** + * @brief Enable the specified MDMA Channel. + * @param __HANDLE__: MDMA handle + * @retval None + */ +#define __HAL_MDMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= MDMA_CCR_EN) + +/** + * @brief Disable the specified MDMA Channel. + * @param __HANDLE__: MDMA handle + * @retval None + */ +#define __HAL_MDMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~MDMA_CCR_EN) + +/** + * @brief Get the MDMA Channel pending flags. + * @param __HANDLE__: MDMA handle + * @param __FLAG__: Get the specified flag. + * This parameter can be any combination of the following values: + * @arg MDMA_FLAG_TE : Transfer Error flag. + * @arg MDMA_FLAG_CTC : Channel Transfer Complete flag. + * @arg MDMA_FLAG_BRT : Block Repeat Transfer flag. + * @arg MDMA_FLAG_BT : Block Transfer complete flag. + * @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag. + * @arg MDMA_FLAG_CRQA : Channel request Active flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_MDMA_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CISR & (__FLAG__)) + +/** + * @brief Clear the MDMA Stream pending flags. + * @param __HANDLE__: MDMA handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg MDMA_FLAG_TE : Transfer Error flag. + * @arg MDMA_FLAG_CTC : Channel Transfer Complete flag. + * @arg MDMA_FLAG_BRT : Block Repeat Transfer flag. + * @arg MDMA_FLAG_BT : Block Transfer complete flag. + * @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag. + * @retval None + */ +#define __HAL_MDMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CIFCR = (__FLAG__)) + +/** + * @brief Enables the specified MDMA Channel interrupts. + * @param __HANDLE__: MDMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg MDMA_IT_TE : Transfer Error interrupt mask + * @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask + * @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask + * @arg MDMA_IT_BT : Block Transfer interrupt mask + * @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask + * @retval None + */ +#define __HAL_MDMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disables the specified MDMA Channel interrupts. + * @param __HANDLE__: MDMA handle + * @param __INTERRUPT__: specifies the MDMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg MDMA_IT_TE : Transfer Error interrupt mask + * @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask + * @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask + * @arg MDMA_IT_BT : Block Transfer interrupt mask + * @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask + * @retval None + */ +#define __HAL_MDMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Checks whether the specified MDMA Channel interrupt is enabled or not. + * @param __HANDLE__: MDMA handle + * @param __INTERRUPT__: specifies the MDMA interrupt source to check. + * @arg MDMA_IT_TE : Transfer Error interrupt mask + * @arg MDMA_IT_CTC : Channel Transfer Complete interrupt mask + * @arg MDMA_IT_BRT : Block Repeat Transfer interrupt mask + * @arg MDMA_IT_BT : Block Transfer interrupt mask + * @arg MDMA_IT_BFTC : BuFfer Transfer Complete interrupt mask + * @retval The state of MDMA_IT (SET or RESET). + */ +#define __HAL_MDMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Writes the number of data in bytes to be transferred on the MDMA Channelx. + * @param __HANDLE__ : MDMA handle + * @param __COUNTER__: Number of data in bytes to be transferred. + * @retval None + */ +#define __HAL_MDMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CBNDTR |= ((__COUNTER__) & MDMA_CBNDTR_BNDT)) + +/** + * @brief Returns the number of remaining data in bytes in the current MDMA Channelx transfer. + * @param __HANDLE__ : MDMA handle + * @retval The number of remaining data in bytes in the current MDMA Channelx transfer. + */ +#define __HAL_MDMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CBNDTR & MDMA_CBNDTR_BNDT) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MDMA_Exported_Functions MDMA Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +/** @defgroup MDMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_DeInit (MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData); + +HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma)); +HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/* Linked list operation functions ********************************************/ +/** @defgroup MDMA_Exported_Functions_Group2 Linked List operation functions + * @brief Linked list operation functions + * @{ + */ + +HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig); +HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode); +HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode); +HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma); + + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @defgroup MDMA_Exported_Functions_Group3 I/O operation functions + * @brief I/O operation functions + * @{ + */ +HAL_StatusTypeDef HAL_MDMA_Start (MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount); +HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount); +HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma); +HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma); +void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup MDMA_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma); +uint32_t HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup MDMA_Private_Types MDMA Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup MDMA_Private_Defines MDMA Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MDMA_Private_Variables MDMA Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MDMA_Private_Constants MDMA Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup MDMA_Private_Macros MDMA Private Macros + * @{ + */ + +#define IS_MDMA_LEVEL_COMPLETE(__LEVEL__) (((__LEVEL__) == HAL_MDMA_FULL_TRANSFER ) || \ + ((__LEVEL__) == HAL_MDMA_BUFFER_TRANSFER )|| \ + ((__LEVEL__) == HAL_MDMA_BLOCK_TRANSFER ) || \ + ((__LEVEL__) == HAL_MDMA_REPEAT_BLOCK_TRANSFER )) + + +#define IS_MDMA_PRIORITY(__PRIORITY__) (((__PRIORITY__) == MDMA_PRIORITY_LOW ) || \ + ((__PRIORITY__) == MDMA_PRIORITY_MEDIUM) || \ + ((__PRIORITY__) == MDMA_PRIORITY_HIGH) || \ + ((__PRIORITY__) == MDMA_PRIORITY_VERY_HIGH)) + +#define IS_MDMA_ENDIANNESS_MODE(__ENDIANNESS__) (((__ENDIANNESS__) == MDMA_LITTLE_ENDIANNESS_PRESERVE ) || \ + ((__ENDIANNESS__) == MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE) || \ + ((__ENDIANNESS__) == MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE) || \ + ((__ENDIANNESS__) == MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE)) + + +#if defined (OCTOSPI2) +#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_OCTOSPI2_TC)) +#else +#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_SDMMC1_COMMAND_END)) +#endif /* OCTOSPI2 */ + +#define IS_MDMA_SOURCE_INC(__INC__) (((__INC__) == MDMA_SRC_INC_DISABLE ) || \ + ((__INC__) == MDMA_SRC_INC_BYTE ) || \ + ((__INC__) == MDMA_SRC_INC_HALFWORD ) || \ + ((__INC__) == MDMA_SRC_INC_WORD ) || \ + ((__INC__) == MDMA_SRC_INC_DOUBLEWORD) || \ + ((__INC__) == MDMA_SRC_DEC_BYTE) || \ + ((__INC__) == MDMA_SRC_DEC_HALFWORD) || \ + ((__INC__) == MDMA_SRC_DEC_WORD) || \ + ((__INC__) == MDMA_SRC_DEC_DOUBLEWORD)) + +#define IS_MDMA_DESTINATION_INC(__INC__) (((__INC__) == MDMA_DEST_INC_DISABLE ) || \ + ((__INC__) == MDMA_DEST_INC_BYTE ) || \ + ((__INC__) == MDMA_DEST_INC_HALFWORD ) || \ + ((__INC__) == MDMA_DEST_INC_WORD ) || \ + ((__INC__) == MDMA_DEST_INC_DOUBLEWORD) || \ + ((__INC__) == MDMA_DEST_DEC_BYTE) || \ + ((__INC__) == MDMA_DEST_DEC_HALFWORD) || \ + ((__INC__) == MDMA_DEST_DEC_WORD) || \ + ((__INC__) == MDMA_DEST_DEC_DOUBLEWORD)) + +#define IS_MDMA_SOURCE_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_SRC_DATASIZE_BYTE ) || \ + ((__SIZE__) == MDMA_SRC_DATASIZE_HALFWORD ) || \ + ((__SIZE__) == MDMA_SRC_DATASIZE_WORD ) || \ + ((__SIZE__) == MDMA_SRC_DATASIZE_DOUBLEWORD)) + +#define IS_MDMA_DESTINATION_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_DEST_DATASIZE_BYTE ) || \ + ((__SIZE__) == MDMA_DEST_DATASIZE_HALFWORD ) || \ + ((__SIZE__) == MDMA_DEST_DATASIZE_WORD ) || \ + ((__SIZE__) == MDMA_DEST_DATASIZE_DOUBLEWORD)) + +#define IS_MDMA_DATA_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == MDMA_DATAALIGN_PACKENABLE ) || \ + ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT ) || \ + ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT_SIGNED ) || \ + ((__ALIGNMENT__) == MDMA_DATAALIGN_LEFT)) + + +#define IS_MDMA_SOURCE_BURST(__BURST__) (((__BURST__) == MDMA_SOURCE_BURST_SINGLE ) || \ + ((__BURST__) == MDMA_SOURCE_BURST_2BEATS ) || \ + ((__BURST__) == MDMA_SOURCE_BURST_4BEATS ) || \ + ((__BURST__) == MDMA_SOURCE_BURST_8BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_16BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_32BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_64BEATS) || \ + ((__BURST__) == MDMA_SOURCE_BURST_128BEATS)) + + +#define IS_MDMA_DESTINATION_BURST(__BURST__) (((__BURST__) == MDMA_DEST_BURST_SINGLE ) || \ + ((__BURST__) == MDMA_DEST_BURST_2BEATS ) || \ + ((__BURST__) == MDMA_DEST_BURST_4BEATS ) || \ + ((__BURST__) == MDMA_DEST_BURST_8BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_16BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_32BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_64BEATS) || \ + ((__BURST__) == MDMA_DEST_BURST_128BEATS)) + + #define IS_MDMA_TRANSFER_TRIGGER_MODE(__MODE__) (((__MODE__) == MDMA_BUFFER_TRANSFER ) || \ + ((__MODE__) == MDMA_BLOCK_TRANSFER ) || \ + ((__MODE__) == MDMA_REPEAT_BLOCK_TRANSFER ) || \ + ((__MODE__) == MDMA_FULL_TRANSFER)) + +#define IS_MDMA_BUFFER_TRANSFER_LENGTH(__LENGTH__) (((__LENGTH__) >= 0x00000001U) && ((__LENGTH__) < 0x000000FFU)) + +#define IS_MDMA_BLOCK_COUNT(__COUNT__) (((__COUNT__) > 0U ) && ((__COUNT__) <= 4096U)) + +#define IS_MDMA_TRANSFER_LENGTH(SIZE) (((SIZE) > 0U) && ((SIZE) <= 65536U)) + +#define IS_MDMA_BLOCK_ADDR_OFFSET(__BLOCK_ADD_OFFSET__) (((__BLOCK_ADD_OFFSET__) > (-65536)) && ((__BLOCK_ADD_OFFSET__) < 65536)) + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup MDMA_Private_Functions_Prototypes MDMA Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MDMA_Private_Functions MDMA Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_MDMA_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ospi.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ospi.h new file mode 100644 index 0000000..78e991a --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ospi.h @@ -0,0 +1,1075 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_ospi.h + * @author MCD Application Team + * @brief Header file of OSPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_OSPI_H +#define STM32H7xx_HAL_OSPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +#if defined(OCTOSPI) || defined(OCTOSPI1) || defined(OCTOSPI2) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup OSPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup OSPI_Exported_Types OSPI Exported Types + * @{ + */ + +/** + * @brief OSPI Init structure definition + */ +typedef struct +{ + uint32_t FifoThreshold; /*!< This is the threshold used by the Peripheral to generate the interrupt + indicating that data are available in reception or free place + is available in transmission. + This parameter can be a value between 1 and 32 */ + uint32_t DualQuad; /*!< It enables or not the dual-quad mode which allow to access up to + quad mode on two different devices to increase the throughput. + This parameter can be a value of @ref OSPI_DualQuad */ + uint32_t MemoryType; /*!< It indicates the external device type connected to the OSPI. + This parameter can be a value of @ref OSPI_MemoryType */ + uint32_t DeviceSize; /*!< It defines the size of the external device connected to the OSPI, + it corresponds to the number of address bits required to access + the external device. + This parameter can be a value between 1 and 32 */ + uint32_t ChipSelectHighTime; /*!< It defines the minimum number of clocks which the chip select + must remain high between commands. + This parameter can be a value between 1 and 8 */ + uint32_t FreeRunningClock; /*!< It enables or not the free running clock. + This parameter can be a value of @ref OSPI_FreeRunningClock */ + uint32_t ClockMode; /*!< It indicates the level of clock when the chip select is released. + This parameter can be a value of @ref OSPI_ClockMode */ + uint32_t WrapSize; /*!< It indicates the wrap-size corresponding the external device configuration. + This parameter can be a value of @ref OSPI_WrapSize */ + uint32_t ClockPrescaler; /*!< It specifies the prescaler factor used for generating + the external clock based on the AHB clock. + This parameter can be a value between 1 and 256 */ + uint32_t SampleShifting; /*!< It allows to delay to 1/2 cycle the data sampling in order + to take in account external signal delays. + This parameter can be a value of @ref OSPI_SampleShifting */ + uint32_t DelayHoldQuarterCycle; /*!< It allows to hold to 1/4 cycle the data. + This parameter can be a value of @ref OSPI_DelayHoldQuarterCycle */ + uint32_t ChipSelectBoundary; /*!< It enables the transaction boundary feature and + defines the boundary of bytes to release the chip select. + This parameter can be a value between 0 and 31 */ + uint32_t DelayBlockBypass; /*!< It enables the delay block bypass, so the sampling is not affected + by the delay block. + This parameter can be a value of @ref OSPI_DelayBlockBypass */ + uint32_t MaxTran; /*!< It enables the communication regulation feature. The chip select is + released every MaxTran+1 bytes when the other OctoSPI request the access + to the bus. + This parameter can be a value between 0 and 255 */ + uint32_t Refresh; /*!< It enables the refresh rate feature. The chip select is released every + Refresh+1 clock cycles. + This parameter can be a value between 0 and 0xFFFFFFFF */ +}OSPI_InitTypeDef; + +/** + * @brief HAL OSPI Handle Structure definition + */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) +typedef struct __OSPI_HandleTypeDef +#else +typedef struct +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ +{ + OCTOSPI_TypeDef *Instance; /*!< OSPI registers base address */ + OSPI_InitTypeDef Init; /*!< OSPI initialization parameters */ + uint8_t *pBuffPtr; /*!< Address of the OSPI buffer for transfer */ + __IO uint32_t XferSize; /*!< Number of data to transfer */ + __IO uint32_t XferCount; /*!< Counter of data transferred */ + MDMA_HandleTypeDef *hmdma; /*!< Handle of the MDMA channel used for the transfer */ + __IO uint32_t State; /*!< Internal state of the OSPI HAL driver */ + __IO uint32_t ErrorCode; /*!< Error code in case of HAL driver internal error */ + uint32_t Timeout; /*!< Timeout used for the OSPI external device access */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + void (* ErrorCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* AbortCpltCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* FifoThresholdCallback)(struct __OSPI_HandleTypeDef *hospi); + void (* CmdCpltCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* RxCpltCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* TxCpltCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* RxHalfCpltCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* TxHalfCpltCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* StatusMatchCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* TimeOutCallback) (struct __OSPI_HandleTypeDef *hospi); + + void (* MspInitCallback) (struct __OSPI_HandleTypeDef *hospi); + void (* MspDeInitCallback) (struct __OSPI_HandleTypeDef *hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ +}OSPI_HandleTypeDef; + +/** + * @brief HAL OSPI Regular Command Structure definition + */ +typedef struct +{ + uint32_t OperationType; /*!< It indicates if the configuration applies to the common registers or + to the registers for the write operation (these registers are only + used for memory-mapped mode). + This parameter can be a value of @ref OSPI_OperationType */ + uint32_t FlashId; /*!< It indicates which external device is selected for this command (it + applies only if Dualquad is disabled in the initialization structure). + This parameter can be a value of @ref OSPI_FlashID */ + uint32_t Instruction; /*!< It contains the instruction to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t InstructionMode; /*!< It indicates the mode of the instruction. + This parameter can be a value of @ref OSPI_InstructionMode */ + uint32_t InstructionSize; /*!< It indicates the size of the instruction. + This parameter can be a value of @ref OSPI_InstructionSize */ + uint32_t InstructionDtrMode; /*!< It enables or not the DTR mode for the instruction phase. + This parameter can be a value of @ref OSPI_InstructionDtrMode */ + uint32_t Address; /*!< It contains the address to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t AddressMode; /*!< It indicates the mode of the address. + This parameter can be a value of @ref OSPI_AddressMode */ + uint32_t AddressSize; /*!< It indicates the size of the address. + This parameter can be a value of @ref OSPI_AddressSize */ + uint32_t AddressDtrMode; /*!< It enables or not the DTR mode for the address phase. + This parameter can be a value of @ref OSPI_AddressDtrMode */ + uint32_t AlternateBytes; /*!< It contains the alternate bytes to be sent to the device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t AlternateBytesMode; /*!< It indicates the mode of the alternate bytes. + This parameter can be a value of @ref OSPI_AlternateBytesMode */ + uint32_t AlternateBytesSize; /*!< It indicates the size of the alternate bytes. + This parameter can be a value of @ref OSPI_AlternateBytesSize */ + uint32_t AlternateBytesDtrMode; /*!< It enables or not the DTR mode for the alternate bytes phase. + This parameter can be a value of @ref OSPI_AlternateBytesDtrMode */ + uint32_t DataMode; /*!< It indicates the mode of the data. + This parameter can be a value of @ref OSPI_DataMode */ + uint32_t NbData; /*!< It indicates the number of data transferred with this command. + This field is only used for indirect mode. + This parameter can be a value between 1 and 0xFFFFFFFF */ + uint32_t DataDtrMode; /*!< It enables or not the DTR mode for the data phase. + This parameter can be a value of @ref OSPI_DataDtrMode */ + uint32_t DummyCycles; /*!< It indicates the number of dummy cycles inserted before data phase. + This parameter can be a value between 0 and 31 */ + uint32_t DQSMode; /*!< It enables or not the data strobe management. + This parameter can be a value of @ref OSPI_DQSMode */ + uint32_t SIOOMode; /*!< It enables or not the SIOO mode. + This parameter can be a value of @ref OSPI_SIOOMode */ +}OSPI_RegularCmdTypeDef; + +/** + * @brief HAL OSPI Hyperbus Configuration Structure definition + */ +typedef struct +{ + uint32_t RWRecoveryTime; /*!< It indicates the number of cycles for the device read write recovery time. + This parameter can be a value between 0 and 255 */ + uint32_t AccessTime; /*!< It indicates the number of cycles for the device access time. + This parameter can be a value between 0 and 255 */ + uint32_t WriteZeroLatency; /*!< It enables or not the latency for the write access. + This parameter can be a value of @ref OSPI_WriteZeroLatency */ + uint32_t LatencyMode; /*!< It configures the latency mode. + This parameter can be a value of @ref OSPI_LatencyMode */ +}OSPI_HyperbusCfgTypeDef; + +/** + * @brief HAL OSPI Hyperbus Command Structure definition + */ +typedef struct +{ + uint32_t AddressSpace; /*!< It indicates the address space accessed by the command. + This parameter can be a value of @ref OSPI_AddressSpace */ + uint32_t Address; /*!< It contains the address to be sent tot he device. + This parameter can be a value between 0 and 0xFFFFFFFF */ + uint32_t AddressSize; /*!< It indicates the size of the address. + This parameter can be a value of @ref OSPI_AddressSize */ + uint32_t NbData; /*!< It indicates the number of data transferred with this command. + This field is only used for indirect mode. + This parameter can be a value between 1 and 0xFFFFFFFF + In case of autopolling mode, this parameter can be any value between 1 and 4 */ + uint32_t DQSMode; /*!< It enables or not the data strobe management. + This parameter can be a value of @ref OSPI_DQSMode */ +}OSPI_HyperbusCmdTypeDef; + +/** + * @brief HAL OSPI Auto Polling mode configuration structure definition + */ +typedef struct +{ + uint32_t Match; /*!< Specifies the value to be compared with the masked status register to get a match. + This parameter can be any value between 0 and 0xFFFFFFFF */ + uint32_t Mask; /*!< Specifies the mask to be applied to the status bytes received. + This parameter can be any value between 0 and 0xFFFFFFFF */ + uint32_t MatchMode; /*!< Specifies the method used for determining a match. + This parameter can be a value of @ref OSPI_MatchMode */ + uint32_t AutomaticStop; /*!< Specifies if automatic polling is stopped after a match. + This parameter can be a value of @ref OSPI_AutomaticStop */ + uint32_t Interval; /*!< Specifies the number of clock cycles between two read during automatic polling phases. + This parameter can be any value between 0 and 0xFFFF */ +}OSPI_AutoPollingTypeDef; + +/** + * @brief HAL OSPI Memory Mapped mode configuration structure definition + */ +typedef struct +{ + uint32_t TimeOutActivation; /*!< Specifies if the timeout counter is enabled to release the chip select. + This parameter can be a value of @ref OSPI_TimeOutActivation */ + uint32_t TimeOutPeriod; /*!< Specifies the number of clock to wait when the FIFO is full before to release the chip select. + This parameter can be any value between 0 and 0xFFFF */ +}OSPI_MemoryMappedTypeDef; + +/** + * @brief HAL OSPI IO Manager Configuration structure definition + */ +typedef struct +{ + uint32_t ClkPort; /*!< It indicates which port of the OSPI IO Manager is used for the CLK pins. + This parameter can be a value between 1 and 8 */ + uint32_t DQSPort; /*!< It indicates which port of the OSPI IO Manager is used for the DQS pin. + This parameter can be a value between 0 and 8, 0 means that signal not used */ + uint32_t NCSPort; /*!< It indicates which port of the OSPI IO Manager is used for the NCS pin. + This parameter can be a value between 1 and 8 */ + uint32_t IOLowPort; /*!< It indicates which port of the OSPI IO Manager is used for the IO[3:0] pins. + This parameter can be a value of @ref OSPIM_IOPort */ + uint32_t IOHighPort; /*!< It indicates which port of the OSPI IO Manager is used for the IO[7:4] pins. + This parameter can be a value of @ref OSPIM_IOPort */ + uint32_t Req2AckTime; /*!< It indicates the minimum switching duration (in number of clock cycles) expected + if some signals are multiplexed in the OSPI IO Manager with the other OSPI. + This parameter can be a value between 1 and 256 */ +}OSPIM_CfgTypeDef; + +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL OSPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_OSPI_ERROR_CB_ID = 0x00U, /*!< OSPI Error Callback ID */ + HAL_OSPI_ABORT_CB_ID = 0x01U, /*!< OSPI Abort Callback ID */ + HAL_OSPI_FIFO_THRESHOLD_CB_ID = 0x02U, /*!< OSPI FIFO Threshold Callback ID */ + HAL_OSPI_CMD_CPLT_CB_ID = 0x03U, /*!< OSPI Command Complete Callback ID */ + HAL_OSPI_RX_CPLT_CB_ID = 0x04U, /*!< OSPI Rx Complete Callback ID */ + HAL_OSPI_TX_CPLT_CB_ID = 0x05U, /*!< OSPI Tx Complete Callback ID */ + HAL_OSPI_RX_HALF_CPLT_CB_ID = 0x06U, /*!< OSPI Rx Half Complete Callback ID */ + HAL_OSPI_TX_HALF_CPLT_CB_ID = 0x07U, /*!< OSPI Tx Half Complete Callback ID */ + HAL_OSPI_STATUS_MATCH_CB_ID = 0x08U, /*!< OSPI Status Match Callback ID */ + HAL_OSPI_TIMEOUT_CB_ID = 0x09U, /*!< OSPI Timeout Callback ID */ + + HAL_OSPI_MSP_INIT_CB_ID = 0x0AU, /*!< OSPI MspInit Callback ID */ + HAL_OSPI_MSP_DEINIT_CB_ID = 0x0BU /*!< OSPI MspDeInit Callback ID */ +}HAL_OSPI_CallbackIDTypeDef; + +/** + * @brief HAL OSPI Callback pointer definition + */ +typedef void (*pOSPI_CallbackTypeDef)(OSPI_HandleTypeDef *hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup OSPI_Exported_Constants OSPI Exported Constants + * @{ + */ + +/** @defgroup OSPI_State OSPI State + * @{ + */ +#define HAL_OSPI_STATE_RESET ((uint32_t)0x00000000U) /*!< Initial state */ +#define HAL_OSPI_STATE_HYPERBUS_INIT ((uint32_t)0x00000001U) /*!< Initialization done in hyperbus mode but timing configuration not done */ +#define HAL_OSPI_STATE_READY ((uint32_t)0x00000002U) /*!< Driver ready to be used */ +#define HAL_OSPI_STATE_CMD_CFG ((uint32_t)0x00000004U) /*!< Command (regular or hyperbus) configured, ready for an action */ +#define HAL_OSPI_STATE_READ_CMD_CFG ((uint32_t)0x00000014U) /*!< Read command configuration done, not the write command configuration */ +#define HAL_OSPI_STATE_WRITE_CMD_CFG ((uint32_t)0x00000024U) /*!< Write command configuration done, not the read command configuration */ +#define HAL_OSPI_STATE_BUSY_CMD ((uint32_t)0x00000008U) /*!< Command without data on-going */ +#define HAL_OSPI_STATE_BUSY_TX ((uint32_t)0x00000018U) /*!< Indirect Tx on-going */ +#define HAL_OSPI_STATE_BUSY_RX ((uint32_t)0x00000028U) /*!< Indirect Rx on-going */ +#define HAL_OSPI_STATE_BUSY_AUTO_POLLING ((uint32_t)0x00000048U) /*!< Auto-polling on-going */ +#define HAL_OSPI_STATE_BUSY_MEM_MAPPED ((uint32_t)0x00000088U) /*!< Memory-mapped on-going */ +#define HAL_OSPI_STATE_ABORT ((uint32_t)0x00000100U) /*!< Abort on-going */ +#define HAL_OSPI_STATE_ERROR ((uint32_t)0x00000200U) /*!< Blocking error, driver should be re-initialized */ +/** + * @} + */ + +/** @defgroup OSPI_ErrorCode OSPI Error Code + * @{ + */ +#define HAL_OSPI_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_OSPI_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ +#define HAL_OSPI_ERROR_TRANSFER ((uint32_t)0x00000002U) /*!< Transfer error */ +#define HAL_OSPI_ERROR_DMA ((uint32_t)0x00000004U) /*!< DMA transfer error */ +#define HAL_OSPI_ERROR_INVALID_PARAM ((uint32_t)0x00000008U) /*!< Invalid parameters error */ +#define HAL_OSPI_ERROR_INVALID_SEQUENCE ((uint32_t)0x00000010U) /*!< Sequence of the state machine is incorrect */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) +#define HAL_OSPI_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid callback error */ +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/ +/** + * @} + */ + +/** @defgroup OSPI_DualQuad OSPI Dual-Quad + * @{ + */ +#define HAL_OSPI_DUALQUAD_DISABLE ((uint32_t)0x00000000U) /*!< Dual-Quad mode disabled */ +#define HAL_OSPI_DUALQUAD_ENABLE ((uint32_t)OCTOSPI_CR_DQM) /*!< Dual-Quad mode enabled */ +/** + * @} + */ + +/** @defgroup OSPI_MemoryType OSPI Memory Type + * @{ + */ +#define HAL_OSPI_MEMTYPE_MICRON ((uint32_t)0x00000000U) /*!< Micron mode */ +#define HAL_OSPI_MEMTYPE_MACRONIX ((uint32_t)OCTOSPI_DCR1_MTYP_0) /*!< Macronix mode */ +#define HAL_OSPI_MEMTYPE_APMEMORY ((uint32_t)OCTOSPI_DCR1_MTYP_1) /*!< AP Memory mode */ +#define HAL_OSPI_MEMTYPE_MACRONIX_RAM ((uint32_t)(OCTOSPI_DCR1_MTYP_1 | OCTOSPI_DCR1_MTYP_0)) /*!< Macronix RAM mode */ +#define HAL_OSPI_MEMTYPE_HYPERBUS ((uint32_t)OCTOSPI_DCR1_MTYP_2) /*!< Hyperbus mode */ +/** + * @} + */ + +/** @defgroup OSPI_FreeRunningClock OSPI Free Running Clock + * @{ + */ +#define HAL_OSPI_FREERUNCLK_DISABLE ((uint32_t)0x00000000U) /*!< CLK is not free running */ +#define HAL_OSPI_FREERUNCLK_ENABLE ((uint32_t)OCTOSPI_DCR1_FRCK) /*!< CLK is free running (always provided) */ +/** + * @} + */ + +/** @defgroup OSPI_ClockMode OSPI Clock Mode + * @{ + */ +#define HAL_OSPI_CLOCK_MODE_0 ((uint32_t)0x00000000U) /*!< CLK must stay low while nCS is high */ +#define HAL_OSPI_CLOCK_MODE_3 ((uint32_t)OCTOSPI_DCR1_CKMODE) /*!< CLK must stay high while nCS is high */ +/** + * @} + */ + +/** @defgroup OSPI_WrapSize OSPI Wrap-Size + * @{ + */ +#define HAL_OSPI_WRAP_NOT_SUPPORTED ((uint32_t)0x00000000U) /*!< wrapped reads are not supported by the memory */ +#define HAL_OSPI_WRAP_16_BYTES ((uint32_t)OCTOSPI_DCR2_WRAPSIZE_1) /*!< external memory supports wrap size of 16 bytes */ +#define HAL_OSPI_WRAP_32_BYTES ((uint32_t)(OCTOSPI_DCR2_WRAPSIZE_0 | OCTOSPI_DCR2_WRAPSIZE_1)) /*!< external memory supports wrap size of 32 bytes */ +#define HAL_OSPI_WRAP_64_BYTES ((uint32_t)OCTOSPI_DCR2_WRAPSIZE_2) /*!< external memory supports wrap size of 64 bytes */ +#define HAL_OSPI_WRAP_128_BYTES ((uint32_t)(OCTOSPI_DCR2_WRAPSIZE_0 | OCTOSPI_DCR2_WRAPSIZE_2)) /*!< external memory supports wrap size of 128 bytes */ +/** + * @} + */ + +/** @defgroup OSPI_SampleShifting OSPI Sample Shifting + * @{ + */ +#define HAL_OSPI_SAMPLE_SHIFTING_NONE ((uint32_t)0x00000000U) /*!< No shift */ +#define HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)OCTOSPI_TCR_SSHIFT) /*!< 1/2 cycle shift */ +/** + * @} + */ + +/** @defgroup OSPI_DelayHoldQuarterCycle OSPI Delay Hold Quarter Cycle + * @{ + */ +#define HAL_OSPI_DHQC_DISABLE ((uint32_t)0x00000000U) /*!< No Delay */ +#define HAL_OSPI_DHQC_ENABLE ((uint32_t)OCTOSPI_TCR_DHQC) /*!< Delay Hold 1/4 cycle */ +/** + * @} + */ + +/** @defgroup OSPI_DelayBlockBypass OSPI Delay Block Bypaas + * @{ + */ +#define HAL_OSPI_DELAY_BLOCK_USED ((uint32_t)0x00000000U) /*!< Sampling clock is delayed by the delay block */ +#define HAL_OSPI_DELAY_BLOCK_BYPASSED ((uint32_t)OCTOSPI_DCR1_DLYBYP) /*!< Delay block is bypassed */ +/** + * @} + */ + +/** @defgroup OSPI_OperationType OSPI Operation Type + * @{ + */ +#define HAL_OSPI_OPTYPE_COMMON_CFG ((uint32_t)0x00000000U) /*!< Common configuration (indirect or auto-polling mode) */ +#define HAL_OSPI_OPTYPE_READ_CFG ((uint32_t)0x00000001U) /*!< Read configuration (memory-mapped mode) */ +#define HAL_OSPI_OPTYPE_WRITE_CFG ((uint32_t)0x00000002U) /*!< Write configuration (memory-mapped mode) */ +#define HAL_OSPI_OPTYPE_WRAP_CFG ((uint32_t)0x00000003U) /*!< Wrap configuration (memory-mapped mode) */ +/** + * @} + */ + +/** @defgroup OSPI_FlashID OSPI Flash Id + * @{ + */ +#define HAL_OSPI_FLASH_ID_1 ((uint32_t)0x00000000U) /*!< FLASH 1 selected */ +#define HAL_OSPI_FLASH_ID_2 ((uint32_t)OCTOSPI_CR_FSEL) /*!< FLASH 2 selected */ +/** + * @} + */ + +/** @defgroup OSPI_InstructionMode OSPI Instruction Mode + * @{ + */ +#define HAL_OSPI_INSTRUCTION_NONE ((uint32_t)0x00000000U) /*!< No instruction */ +#define HAL_OSPI_INSTRUCTION_1_LINE ((uint32_t)OCTOSPI_CCR_IMODE_0) /*!< Instruction on a single line */ +#define HAL_OSPI_INSTRUCTION_2_LINES ((uint32_t)OCTOSPI_CCR_IMODE_1) /*!< Instruction on two lines */ +#define HAL_OSPI_INSTRUCTION_4_LINES ((uint32_t)(OCTOSPI_CCR_IMODE_0 | OCTOSPI_CCR_IMODE_1)) /*!< Instruction on four lines */ +#define HAL_OSPI_INSTRUCTION_8_LINES ((uint32_t)OCTOSPI_CCR_IMODE_2) /*!< Instruction on eight lines */ +/** + * @} + */ + +/** @defgroup OSPI_InstructionSize OSPI Instruction Size + * @{ + */ +#define HAL_OSPI_INSTRUCTION_8_BITS ((uint32_t)0x00000000U) /*!< 8-bit instruction */ +#define HAL_OSPI_INSTRUCTION_16_BITS ((uint32_t)OCTOSPI_CCR_ISIZE_0) /*!< 16-bit instruction */ +#define HAL_OSPI_INSTRUCTION_24_BITS ((uint32_t)OCTOSPI_CCR_ISIZE_1) /*!< 24-bit instruction */ +#define HAL_OSPI_INSTRUCTION_32_BITS ((uint32_t)OCTOSPI_CCR_ISIZE) /*!< 32-bit instruction */ +/** + * @} + */ + +/** @defgroup OSPI_InstructionDtrMode OSPI Instruction DTR Mode + * @{ + */ +#define HAL_OSPI_INSTRUCTION_DTR_DISABLE ((uint32_t)0x00000000U) /*!< DTR mode disabled for instruction phase */ +#define HAL_OSPI_INSTRUCTION_DTR_ENABLE ((uint32_t)OCTOSPI_CCR_IDTR) /*!< DTR mode enabled for instruction phase */ +/** + * @} + */ + +/** @defgroup OSPI_AddressMode OSPI Address Mode + * @{ + */ +#define HAL_OSPI_ADDRESS_NONE ((uint32_t)0x00000000U) /*!< No address */ +#define HAL_OSPI_ADDRESS_1_LINE ((uint32_t)OCTOSPI_CCR_ADMODE_0) /*!< Address on a single line */ +#define HAL_OSPI_ADDRESS_2_LINES ((uint32_t)OCTOSPI_CCR_ADMODE_1) /*!< Address on two lines */ +#define HAL_OSPI_ADDRESS_4_LINES ((uint32_t)(OCTOSPI_CCR_ADMODE_0 | OCTOSPI_CCR_ADMODE_1)) /*!< Address on four lines */ +#define HAL_OSPI_ADDRESS_8_LINES ((uint32_t)OCTOSPI_CCR_ADMODE_2) /*!< Address on eight lines */ +/** + * @} + */ + +/** @defgroup OSPI_AddressSize OSPI Address Size + * @{ + */ +#define HAL_OSPI_ADDRESS_8_BITS ((uint32_t)0x00000000U) /*!< 8-bit address */ +#define HAL_OSPI_ADDRESS_16_BITS ((uint32_t)OCTOSPI_CCR_ADSIZE_0) /*!< 16-bit address */ +#define HAL_OSPI_ADDRESS_24_BITS ((uint32_t)OCTOSPI_CCR_ADSIZE_1) /*!< 24-bit address */ +#define HAL_OSPI_ADDRESS_32_BITS ((uint32_t)OCTOSPI_CCR_ADSIZE) /*!< 32-bit address */ +/** + * @} + */ + +/** @defgroup OSPI_AddressDtrMode OSPI Address DTR Mode + * @{ + */ +#define HAL_OSPI_ADDRESS_DTR_DISABLE ((uint32_t)0x00000000U) /*!< DTR mode disabled for address phase */ +#define HAL_OSPI_ADDRESS_DTR_ENABLE ((uint32_t)OCTOSPI_CCR_ADDTR) /*!< DTR mode enabled for address phase */ +/** + * @} + */ + +/** @defgroup OSPI_AlternateBytesMode OSPI Alternate Bytes Mode + * @{ + */ +#define HAL_OSPI_ALTERNATE_BYTES_NONE ((uint32_t)0x00000000U) /*!< No alternate bytes */ +#define HAL_OSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)OCTOSPI_CCR_ABMODE_0) /*!< Alternate bytes on a single line */ +#define HAL_OSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)OCTOSPI_CCR_ABMODE_1) /*!< Alternate bytes on two lines */ +#define HAL_OSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)(OCTOSPI_CCR_ABMODE_0 | OCTOSPI_CCR_ABMODE_1)) /*!< Alternate bytes on four lines */ +#define HAL_OSPI_ALTERNATE_BYTES_8_LINES ((uint32_t)OCTOSPI_CCR_ABMODE_2) /*!< Alternate bytes on eight lines */ +/** + * @} + */ + +/** @defgroup OSPI_AlternateBytesSize OSPI Alternate Bytes Size + * @{ + */ +#define HAL_OSPI_ALTERNATE_BYTES_8_BITS ((uint32_t)0x00000000U) /*!< 8-bit alternate bytes */ +#define HAL_OSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)OCTOSPI_CCR_ABSIZE_0) /*!< 16-bit alternate bytes */ +#define HAL_OSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)OCTOSPI_CCR_ABSIZE_1) /*!< 24-bit alternate bytes */ +#define HAL_OSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)OCTOSPI_CCR_ABSIZE) /*!< 32-bit alternate bytes */ +/** + * @} + */ + +/** @defgroup OSPI_AlternateBytesDtrMode OSPI Alternate Bytes DTR Mode + * @{ + */ +#define HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE ((uint32_t)0x00000000U) /*!< DTR mode disabled for alternate bytes phase */ +#define HAL_OSPI_ALTERNATE_BYTES_DTR_ENABLE ((uint32_t)OCTOSPI_CCR_ABDTR) /*!< DTR mode enabled for alternate bytes phase */ +/** + * @} + */ + +/** @defgroup OSPI_DataMode OSPI Data Mode + * @{ + */ +#define HAL_OSPI_DATA_NONE ((uint32_t)0x00000000U) /*!< No data */ +#define HAL_OSPI_DATA_1_LINE ((uint32_t)OCTOSPI_CCR_DMODE_0) /*!< Data on a single line */ +#define HAL_OSPI_DATA_2_LINES ((uint32_t)OCTOSPI_CCR_DMODE_1) /*!< Data on two lines */ +#define HAL_OSPI_DATA_4_LINES ((uint32_t)(OCTOSPI_CCR_DMODE_0 | OCTOSPI_CCR_DMODE_1)) /*!< Data on four lines */ +#define HAL_OSPI_DATA_8_LINES ((uint32_t)OCTOSPI_CCR_DMODE_2) /*!< Data on eight lines */ +/** + * @} + */ + +/** @defgroup OSPI_DataDtrMode OSPI Data DTR Mode + * @{ + */ +#define HAL_OSPI_DATA_DTR_DISABLE ((uint32_t)0x00000000U) /*!< DTR mode disabled for data phase */ +#define HAL_OSPI_DATA_DTR_ENABLE ((uint32_t)OCTOSPI_CCR_DDTR) /*!< DTR mode enabled for data phase */ +/** + * @} + */ + +/** @defgroup OSPI_DQSMode OSPI DQS Mode + * @{ + */ +#define HAL_OSPI_DQS_DISABLE ((uint32_t)0x00000000U) /*!< DQS disabled */ +#define HAL_OSPI_DQS_ENABLE ((uint32_t)OCTOSPI_CCR_DQSE) /*!< DQS enabled */ +/** + * @} + */ + +/** @defgroup OSPI_SIOOMode OSPI SIOO Mode + * @{ + */ +#define HAL_OSPI_SIOO_INST_EVERY_CMD ((uint32_t)0x00000000U) /*!< Send instruction on every transaction */ +#define HAL_OSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)OCTOSPI_CCR_SIOO) /*!< Send instruction only for the first command */ +/** + * @} + */ + +/** @defgroup OSPI_WriteZeroLatency OSPI Hyperbus Write Zero Latency Activation + * @{ + */ +#define HAL_OSPI_LATENCY_ON_WRITE ((uint32_t)0x00000000U) /*!< Latency on write accesses */ +#define HAL_OSPI_NO_LATENCY_ON_WRITE ((uint32_t)OCTOSPI_HLCR_WZL) /*!< No latency on write accesses */ +/** + * @} + */ + +/** @defgroup OSPI_LatencyMode OSPI Hyperbus Latency Mode + * @{ + */ +#define HAL_OSPI_VARIABLE_LATENCY ((uint32_t)0x00000000U) /*!< Variable initial latency */ +#define HAL_OSPI_FIXED_LATENCY ((uint32_t)OCTOSPI_HLCR_LM) /*!< Fixed latency */ +/** + * @} + */ + +/** @defgroup OSPI_AddressSpace OSPI Hyperbus Address Space + * @{ + */ +#define HAL_OSPI_MEMORY_ADDRESS_SPACE ((uint32_t)0x00000000U) /*!< HyperBus memory mode */ +#define HAL_OSPI_REGISTER_ADDRESS_SPACE ((uint32_t)OCTOSPI_DCR1_MTYP_0) /*!< HyperBus register mode */ +/** + * @} + */ + +/** @defgroup OSPI_MatchMode OSPI Match Mode + * @{ + */ +#define HAL_OSPI_MATCH_MODE_AND ((uint32_t)0x00000000U) /*!< AND match mode between unmasked bits */ +#define HAL_OSPI_MATCH_MODE_OR ((uint32_t)OCTOSPI_CR_PMM) /*!< OR match mode between unmasked bits */ +/** + * @} + */ + +/** @defgroup OSPI_AutomaticStop OSPI Automatic Stop + * @{ + */ +#define HAL_OSPI_AUTOMATIC_STOP_DISABLE ((uint32_t)0x00000000U) /*!< AutoPolling stops only with abort or OSPI disabling */ +#define HAL_OSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)OCTOSPI_CR_APMS) /*!< AutoPolling stops as soon as there is a match */ +/** + * @} + */ + +/** @defgroup OSPI_TimeOutActivation OSPI Timeout Activation + * @{ + */ +#define HAL_OSPI_TIMEOUT_COUNTER_DISABLE ((uint32_t)0x00000000U) /*!< Timeout counter disabled, nCS remains active */ +#define HAL_OSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)OCTOSPI_CR_TCEN) /*!< Timeout counter enabled, nCS released when timeout expires */ +/** + * @} + */ + +/** @defgroup OSPI_Flags OSPI Flags + * @{ + */ +#define HAL_OSPI_FLAG_BUSY OCTOSPI_SR_BUSY /*!< Busy flag: operation is ongoing */ +#define HAL_OSPI_FLAG_TO OCTOSPI_SR_TOF /*!< Timeout flag: timeout occurs in memory-mapped mode */ +#define HAL_OSPI_FLAG_SM OCTOSPI_SR_SMF /*!< Status match flag: received data matches in autopolling mode */ +#define HAL_OSPI_FLAG_FT OCTOSPI_SR_FTF /*!< Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete */ +#define HAL_OSPI_FLAG_TC OCTOSPI_SR_TCF /*!< Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted */ +#define HAL_OSPI_FLAG_TE OCTOSPI_SR_TEF /*!< Transfer error flag: invalid address is being accessed */ +/** + * @} + */ + +/** @defgroup OSPI_Interrupts OSPI Interrupts + * @{ + */ +#define HAL_OSPI_IT_TO OCTOSPI_CR_TOIE /*!< Interrupt on the timeout flag */ +#define HAL_OSPI_IT_SM OCTOSPI_CR_SMIE /*!< Interrupt on the status match flag */ +#define HAL_OSPI_IT_FT OCTOSPI_CR_FTIE /*!< Interrupt on the fifo threshold flag */ +#define HAL_OSPI_IT_TC OCTOSPI_CR_TCIE /*!< Interrupt on the transfer complete flag */ +#define HAL_OSPI_IT_TE OCTOSPI_CR_TEIE /*!< Interrupt on the transfer error flag */ +/** + * @} + */ + +/** @defgroup OSPI_Timeout_definition OSPI Timeout definition + * @{ + */ +#define HAL_OSPI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000U) /* 5 s */ +/** + * @} + */ + +/** @defgroup OSPIM_IOPort OSPI IO Manager IO Port + * @{ + */ +#define HAL_OSPIM_IOPORT_NONE ((uint32_t)0x00000000U) /*!< IOs not used */ +#define HAL_OSPIM_IOPORT_1_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x1U)) /*!< Port 1 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_1_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x1U)) /*!< Port 1 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_2_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x2U)) /*!< Port 2 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_2_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x2U)) /*!< Port 2 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_3_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x3U)) /*!< Port 3 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_3_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x3U)) /*!< Port 3 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_4_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x4U)) /*!< Port 4 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_4_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x4U)) /*!< Port 4 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_5_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x5U)) /*!< Port 5 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_5_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x5U)) /*!< Port 5 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_6_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x6U)) /*!< Port 6 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_6_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x6U)) /*!< Port 6 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_7_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x7U)) /*!< Port 7 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_7_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x7U)) /*!< Port 7 - IO[7:4] */ +#define HAL_OSPIM_IOPORT_8_LOW ((uint32_t)(OCTOSPIM_PCR_IOLEN | 0x8U)) /*!< Port 8 - IO[3:0] */ +#define HAL_OSPIM_IOPORT_8_HIGH ((uint32_t)(OCTOSPIM_PCR_IOHEN | 0x8U)) /*!< Port 8 - IO[7:4] */ +/** + * @} + */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup OSPI_Exported_Macros OSPI Exported Macros + * @{ + */ +/** @brief Reset OSPI handle state. + * @param __HANDLE__ specifies the OSPI Handle. + * @retval None + */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) +#define __HAL_OSPI_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_OSPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_OSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OSPI_STATE_RESET) +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + +/** @brief Enable the OSPI peripheral. + * @param __HANDLE__ specifies the OSPI Handle. + * @retval None + */ +#define __HAL_OSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, OCTOSPI_CR_EN) + +/** @brief Disable the OSPI peripheral. + * @param __HANDLE__ specifies the OSPI Handle. + * @retval None + */ +#define __HAL_OSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, OCTOSPI_CR_EN) + +/** @brief Enable the specified OSPI interrupt. + * @param __HANDLE__ specifies the OSPI Handle. + * @param __INTERRUPT__ specifies the OSPI interrupt source to enable. + * This parameter can be one of the following values: + * @arg HAL_OSPI_IT_TO: OSPI Timeout interrupt + * @arg HAL_OSPI_IT_SM: OSPI Status match interrupt + * @arg HAL_OSPI_IT_FT: OSPI FIFO threshold interrupt + * @arg HAL_OSPI_IT_TC: OSPI Transfer complete interrupt + * @arg HAL_OSPI_IT_TE: OSPI Transfer error interrupt + * @retval None + */ +#define __HAL_OSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + + +/** @brief Disable the specified OSPI interrupt. + * @param __HANDLE__ specifies the OSPI Handle. + * @param __INTERRUPT__ specifies the OSPI interrupt source to disable. + * This parameter can be one of the following values: + * @arg HAL_OSPI_IT_TO: OSPI Timeout interrupt + * @arg HAL_OSPI_IT_SM: OSPI Status match interrupt + * @arg HAL_OSPI_IT_FT: OSPI FIFO threshold interrupt + * @arg HAL_OSPI_IT_TC: OSPI Transfer complete interrupt + * @arg HAL_OSPI_IT_TE: OSPI Transfer error interrupt + * @retval None + */ +#define __HAL_OSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) + +/** @brief Check whether the specified OSPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the OSPI Handle. + * @param __INTERRUPT__ specifies the OSPI interrupt source to check. + * This parameter can be one of the following values: + * @arg HAL_OSPI_IT_TO: OSPI Timeout interrupt + * @arg HAL_OSPI_IT_SM: OSPI Status match interrupt + * @arg HAL_OSPI_IT_FT: OSPI FIFO threshold interrupt + * @arg HAL_OSPI_IT_TC: OSPI Transfer complete interrupt + * @arg HAL_OSPI_IT_TE: OSPI Transfer error interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_OSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))\ + == (__INTERRUPT__)) + +/** + * @brief Check whether the selected OSPI flag is set or not. + * @param __HANDLE__ specifies the OSPI Handle. + * @param __FLAG__ specifies the OSPI flag to check. + * This parameter can be one of the following values: + * @arg HAL_OSPI_FLAG_BUSY: OSPI Busy flag + * @arg HAL_OSPI_FLAG_TO: OSPI Timeout flag + * @arg HAL_OSPI_FLAG_SM: OSPI Status match flag + * @arg HAL_OSPI_FLAG_FT: OSPI FIFO threshold flag + * @arg HAL_OSPI_FLAG_TC: OSPI Transfer complete flag + * @arg HAL_OSPI_FLAG_TE: OSPI Transfer error flag + * @retval None + */ +#define __HAL_OSPI_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) \ + != 0U) ? SET : RESET) + +/** @brief Clears the specified OSPI's flag status. + * @param __HANDLE__ specifies the OSPI Handle. + * @param __FLAG__ specifies the OSPI clear register flag that needs to be set + * This parameter can be one of the following values: + * @arg HAL_OSPI_FLAG_TO: OSPI Timeout flag + * @arg HAL_OSPI_FLAG_SM: OSPI Status match flag + * @arg HAL_OSPI_FLAG_TC: OSPI Transfer complete flag + * @arg HAL_OSPI_FLAG_TE: OSPI Transfer error flag + * @retval None + */ +#define __HAL_OSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup OSPI_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup OSPI_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_OSPI_Init (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_MspInit (OSPI_HandleTypeDef *hospi); +HAL_StatusTypeDef HAL_OSPI_DeInit (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_MspDeInit (OSPI_HandleTypeDef *hospi); + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup OSPI_Exported_Functions_Group2 + * @{ + */ +/* OSPI IRQ handler function */ +void HAL_OSPI_IRQHandler (OSPI_HandleTypeDef *hospi); + +/* OSPI command configuration functions */ +HAL_StatusTypeDef HAL_OSPI_Command(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd, uint32_t Timeout); +HAL_StatusTypeDef HAL_OSPI_Command_IT(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd); +HAL_StatusTypeDef HAL_OSPI_HyperbusCfg(OSPI_HandleTypeDef *hospi, OSPI_HyperbusCfgTypeDef *cfg, uint32_t Timeout); +HAL_StatusTypeDef HAL_OSPI_HyperbusCmd(OSPI_HandleTypeDef *hospi, OSPI_HyperbusCmdTypeDef *cmd, uint32_t Timeout); + +/* OSPI indirect mode functions */ +HAL_StatusTypeDef HAL_OSPI_Transmit(OSPI_HandleTypeDef *hospi, uint8_t *pData, uint32_t Timeout); +HAL_StatusTypeDef HAL_OSPI_Receive(OSPI_HandleTypeDef *hospi, uint8_t *pData, uint32_t Timeout); +HAL_StatusTypeDef HAL_OSPI_Transmit_IT(OSPI_HandleTypeDef *hospi, uint8_t *pData); +HAL_StatusTypeDef HAL_OSPI_Receive_IT(OSPI_HandleTypeDef *hospi, uint8_t *pData); +HAL_StatusTypeDef HAL_OSPI_Transmit_DMA(OSPI_HandleTypeDef *hospi, uint8_t *pData); +HAL_StatusTypeDef HAL_OSPI_Receive_DMA(OSPI_HandleTypeDef *hospi, uint8_t *pData); + +/* OSPI status flag polling mode functions */ +HAL_StatusTypeDef HAL_OSPI_AutoPolling(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg, uint32_t Timeout); +HAL_StatusTypeDef HAL_OSPI_AutoPolling_IT(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg); + +/* OSPI memory-mapped mode functions */ +HAL_StatusTypeDef HAL_OSPI_MemoryMapped (OSPI_HandleTypeDef *hospi, OSPI_MemoryMappedTypeDef *cfg); + +/* Callback functions in non-blocking modes ***********************************/ +void HAL_OSPI_ErrorCallback (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_AbortCpltCallback (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_FifoThresholdCallback(OSPI_HandleTypeDef *hospi); + +/* OSPI indirect mode functions */ +void HAL_OSPI_CmdCpltCallback (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_RxCpltCallback (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_TxCpltCallback (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_RxHalfCpltCallback (OSPI_HandleTypeDef *hospi); +void HAL_OSPI_TxHalfCpltCallback (OSPI_HandleTypeDef *hospi); + +/* OSPI status flag polling mode functions */ +void HAL_OSPI_StatusMatchCallback (OSPI_HandleTypeDef *hospi); + +/* OSPI memory-mapped mode functions */ +void HAL_OSPI_TimeOutCallback (OSPI_HandleTypeDef *hospi); + +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) +/* OSPI callback registering/unregistering */ +HAL_StatusTypeDef HAL_OSPI_RegisterCallback(OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID, + pOSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_OSPI_UnRegisterCallback(OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ +/** + * @} + */ + +/* Peripheral Control and State functions ************************************/ +/** @addtogroup OSPI_Exported_Functions_Group3 + * @{ + */ +HAL_StatusTypeDef HAL_OSPI_Abort (OSPI_HandleTypeDef *hospi); +HAL_StatusTypeDef HAL_OSPI_Abort_IT (OSPI_HandleTypeDef *hospi); +HAL_StatusTypeDef HAL_OSPI_SetFifoThreshold (OSPI_HandleTypeDef *hospi, uint32_t Threshold); +uint32_t HAL_OSPI_GetFifoThreshold (OSPI_HandleTypeDef *hospi); +HAL_StatusTypeDef HAL_OSPI_SetTimeout (OSPI_HandleTypeDef *hospi, uint32_t Timeout); +uint32_t HAL_OSPI_GetError (OSPI_HandleTypeDef *hospi); +uint32_t HAL_OSPI_GetState (OSPI_HandleTypeDef *hospi); + +/** + * @} + */ + +/* OSPI IO Manager configuration function ************************************/ +/** @addtogroup OSPI_Exported_Functions_Group4 + * @{ + */ +HAL_StatusTypeDef HAL_OSPIM_Config(OSPI_HandleTypeDef *hospi, OSPIM_CfgTypeDef *cfg, uint32_t Timeout); + +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** + @cond 0 + */ +#define IS_OSPI_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) >= 1U) && ((THRESHOLD) <= 32U)) + +#define IS_OSPI_DUALQUAD_MODE(MODE) (((MODE) == HAL_OSPI_DUALQUAD_DISABLE) || \ + ((MODE) == HAL_OSPI_DUALQUAD_ENABLE)) + +#define IS_OSPI_MEMORY_TYPE(TYPE) (((TYPE) == HAL_OSPI_MEMTYPE_MICRON) || \ + ((TYPE) == HAL_OSPI_MEMTYPE_MACRONIX) || \ + ((TYPE) == HAL_OSPI_MEMTYPE_APMEMORY) || \ + ((TYPE) == HAL_OSPI_MEMTYPE_MACRONIX_RAM) || \ + ((TYPE) == HAL_OSPI_MEMTYPE_HYPERBUS)) + +#define IS_OSPI_DEVICE_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 32U)) + +#define IS_OSPI_CS_HIGH_TIME(TIME) (((TIME) >= 1U) && ((TIME) <= 8U)) + +#define IS_OSPI_FREE_RUN_CLK(CLK) (((CLK) == HAL_OSPI_FREERUNCLK_DISABLE) || \ + ((CLK) == HAL_OSPI_FREERUNCLK_ENABLE)) + +#define IS_OSPI_CLOCK_MODE(MODE) (((MODE) == HAL_OSPI_CLOCK_MODE_0) || \ + ((MODE) == HAL_OSPI_CLOCK_MODE_3)) + +#define IS_OSPI_WRAP_SIZE(SIZE) (((SIZE) == HAL_OSPI_WRAP_NOT_SUPPORTED) || \ + ((SIZE) == HAL_OSPI_WRAP_16_BYTES) || \ + ((SIZE) == HAL_OSPI_WRAP_32_BYTES) || \ + ((SIZE) == HAL_OSPI_WRAP_64_BYTES) || \ + ((SIZE) == HAL_OSPI_WRAP_128_BYTES)) + +#define IS_OSPI_CLK_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 256U)) + +#define IS_OSPI_SAMPLE_SHIFTING(CYCLE) (((CYCLE) == HAL_OSPI_SAMPLE_SHIFTING_NONE) || \ + ((CYCLE) == HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE)) + +#define IS_OSPI_DHQC(CYCLE) (((CYCLE) == HAL_OSPI_DHQC_DISABLE) || \ + ((CYCLE) == HAL_OSPI_DHQC_ENABLE)) + +#define IS_OSPI_OPERATION_TYPE(TYPE) (((TYPE) == HAL_OSPI_OPTYPE_COMMON_CFG) || \ + ((TYPE) == HAL_OSPI_OPTYPE_READ_CFG) || \ + ((TYPE) == HAL_OSPI_OPTYPE_WRITE_CFG) || \ + ((TYPE) == HAL_OSPI_OPTYPE_WRAP_CFG)) + +#define IS_OSPI_FLASH_ID(FLASHID) (((FLASHID) == HAL_OSPI_FLASH_ID_1) || \ + ((FLASHID) == HAL_OSPI_FLASH_ID_2)) + +#define IS_OSPI_INSTRUCTION_MODE(MODE) (((MODE) == HAL_OSPI_INSTRUCTION_NONE) || \ + ((MODE) == HAL_OSPI_INSTRUCTION_1_LINE) || \ + ((MODE) == HAL_OSPI_INSTRUCTION_2_LINES) || \ + ((MODE) == HAL_OSPI_INSTRUCTION_4_LINES) || \ + ((MODE) == HAL_OSPI_INSTRUCTION_8_LINES)) + +#define IS_OSPI_INSTRUCTION_SIZE(SIZE) (((SIZE) == HAL_OSPI_INSTRUCTION_8_BITS) || \ + ((SIZE) == HAL_OSPI_INSTRUCTION_16_BITS) || \ + ((SIZE) == HAL_OSPI_INSTRUCTION_24_BITS) || \ + ((SIZE) == HAL_OSPI_INSTRUCTION_32_BITS)) + +#define IS_OSPI_INSTRUCTION_DTR_MODE(MODE) (((MODE) == HAL_OSPI_INSTRUCTION_DTR_DISABLE) || \ + ((MODE) == HAL_OSPI_INSTRUCTION_DTR_ENABLE)) + +#define IS_OSPI_ADDRESS_MODE(MODE) (((MODE) == HAL_OSPI_ADDRESS_NONE) || \ + ((MODE) == HAL_OSPI_ADDRESS_1_LINE) || \ + ((MODE) == HAL_OSPI_ADDRESS_2_LINES) || \ + ((MODE) == HAL_OSPI_ADDRESS_4_LINES) || \ + ((MODE) == HAL_OSPI_ADDRESS_8_LINES)) + +#define IS_OSPI_ADDRESS_SIZE(SIZE) (((SIZE) == HAL_OSPI_ADDRESS_8_BITS) || \ + ((SIZE) == HAL_OSPI_ADDRESS_16_BITS) || \ + ((SIZE) == HAL_OSPI_ADDRESS_24_BITS) || \ + ((SIZE) == HAL_OSPI_ADDRESS_32_BITS)) + +#define IS_OSPI_ADDRESS_DTR_MODE(MODE) (((MODE) == HAL_OSPI_ADDRESS_DTR_DISABLE) || \ + ((MODE) == HAL_OSPI_ADDRESS_DTR_ENABLE)) + +#define IS_OSPI_ALT_BYTES_MODE(MODE) (((MODE) == HAL_OSPI_ALTERNATE_BYTES_NONE) || \ + ((MODE) == HAL_OSPI_ALTERNATE_BYTES_1_LINE) || \ + ((MODE) == HAL_OSPI_ALTERNATE_BYTES_2_LINES) || \ + ((MODE) == HAL_OSPI_ALTERNATE_BYTES_4_LINES) || \ + ((MODE) == HAL_OSPI_ALTERNATE_BYTES_8_LINES)) + +#define IS_OSPI_ALT_BYTES_SIZE(SIZE) (((SIZE) == HAL_OSPI_ALTERNATE_BYTES_8_BITS) || \ + ((SIZE) == HAL_OSPI_ALTERNATE_BYTES_16_BITS) || \ + ((SIZE) == HAL_OSPI_ALTERNATE_BYTES_24_BITS) || \ + ((SIZE) == HAL_OSPI_ALTERNATE_BYTES_32_BITS)) + +#define IS_OSPI_ALT_BYTES_DTR_MODE(MODE) (((MODE) == HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE) || \ + ((MODE) == HAL_OSPI_ALTERNATE_BYTES_DTR_ENABLE)) + +#define IS_OSPI_DATA_MODE(MODE) (((MODE) == HAL_OSPI_DATA_NONE) || \ + ((MODE) == HAL_OSPI_DATA_1_LINE) || \ + ((MODE) == HAL_OSPI_DATA_2_LINES) || \ + ((MODE) == HAL_OSPI_DATA_4_LINES) || \ + ((MODE) == HAL_OSPI_DATA_8_LINES)) + +#define IS_OSPI_NUMBER_DATA(NUMBER) ((NUMBER) >= 1U) + +#define IS_OSPI_DATA_DTR_MODE(MODE) (((MODE) == HAL_OSPI_DATA_DTR_DISABLE) || \ + ((MODE) == HAL_OSPI_DATA_DTR_ENABLE)) + +#define IS_OSPI_DUMMY_CYCLES(NUMBER) ((NUMBER) <= 31U) + +#define IS_OSPI_DQS_MODE(MODE) (((MODE) == HAL_OSPI_DQS_DISABLE) || \ + ((MODE) == HAL_OSPI_DQS_ENABLE)) + +#define IS_OSPI_SIOO_MODE(MODE) (((MODE) == HAL_OSPI_SIOO_INST_EVERY_CMD) || \ + ((MODE) == HAL_OSPI_SIOO_INST_ONLY_FIRST_CMD)) + +#define IS_OSPI_RW_RECOVERY_TIME(NUMBER) ((NUMBER) <= 255U) + +#define IS_OSPI_ACCESS_TIME(NUMBER) ((NUMBER) <= 255U) + +#define IS_OSPI_WRITE_ZERO_LATENCY(MODE) (((MODE) == HAL_OSPI_LATENCY_ON_WRITE) || \ + ((MODE) == HAL_OSPI_NO_LATENCY_ON_WRITE)) + +#define IS_OSPI_LATENCY_MODE(MODE) (((MODE) == HAL_OSPI_VARIABLE_LATENCY) || \ + ((MODE) == HAL_OSPI_FIXED_LATENCY)) + +#define IS_OSPI_ADDRESS_SPACE(SPACE) (((SPACE) == HAL_OSPI_MEMORY_ADDRESS_SPACE) || \ + ((SPACE) == HAL_OSPI_REGISTER_ADDRESS_SPACE)) + +#define IS_OSPI_MATCH_MODE(MODE) (((MODE) == HAL_OSPI_MATCH_MODE_AND) || \ + ((MODE) == HAL_OSPI_MATCH_MODE_OR)) + +#define IS_OSPI_AUTOMATIC_STOP(MODE) (((MODE) == HAL_OSPI_AUTOMATIC_STOP_ENABLE) || \ + ((MODE) == HAL_OSPI_AUTOMATIC_STOP_DISABLE)) + +#define IS_OSPI_INTERVAL(INTERVAL) ((INTERVAL) <= 0xFFFFU) + +#define IS_OSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1U) && ((SIZE) <= 4U)) + +#define IS_OSPI_TIMEOUT_ACTIVATION(MODE) (((MODE) == HAL_OSPI_TIMEOUT_COUNTER_DISABLE) || \ + ((MODE) == HAL_OSPI_TIMEOUT_COUNTER_ENABLE)) + +#define IS_OSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFFU) + +#define IS_OSPI_CS_BOUNDARY(BOUNDARY) ((BOUNDARY) <= 31U) + +#define IS_OSPI_DLYBYP(MODE) (((MODE) == HAL_OSPI_DELAY_BLOCK_USED) || \ + ((MODE) == HAL_OSPI_DELAY_BLOCK_BYPASSED)) + +#define IS_OSPI_MAXTRAN(NB_BYTES) ((NB_BYTES) <= 255U) + +#define IS_OSPIM_PORT(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U)) + +#define IS_OSPIM_DQS_PORT(NUMBER) ((NUMBER) <= 8U) + +#define IS_OSPIM_IO_PORT(PORT) (((PORT) == HAL_OSPIM_IOPORT_NONE) || \ + ((PORT) == HAL_OSPIM_IOPORT_1_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_1_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_2_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_2_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_3_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_3_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_4_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_4_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_5_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_5_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_6_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_6_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_7_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_7_HIGH) || \ + ((PORT) == HAL_OSPIM_IOPORT_8_LOW) || \ + ((PORT) == HAL_OSPIM_IOPORT_8_HIGH)) + +#define IS_OSPIM_REQ2ACKTIME(TIME) (((TIME) >= 1U) && ((TIME) <= 256U)) +/** + @endcond + */ + +/* End of private macros -----------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* OCTOSPI || OCTOSPI1 || OCTOSPI2 */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_OSPI_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h new file mode 100644 index 0000000..91a9054 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h @@ -0,0 +1,809 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PWR_H +#define STM32H7xx_HAL_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This + parameter can be a value of @ref + PWR_PVD_detection_level. + */ + + uint32_t Mode; /*!< Mode: Specifies the EXTI operating mode for the PVD + event. This parameter can be a value of @ref + PWR_PVD_Mode. + */ +}PWR_PVDTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level PWR PVD detection level + * @{ + */ +#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Programmable voltage detector + level 0 selection : 1V95 */ +#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Programmable voltage detector + level 1 selection : 2V1 */ +#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Programmable voltage detector + level 2 selection : 2V25 */ +#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Programmable voltage detector + level 3 selection : 2V4 */ +#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Programmable voltage detector + level 4 selection : 2V55 */ +#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Programmable voltage detector + level 5 selection : 2V7 */ +#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Programmable voltage detector + level 6 selection : 2V85 */ +#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External input analog voltage + (Compare internally to VREF) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD Mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< Interrupt Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< Interrupt Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode + * @{ + */ +#define PWR_MAINREGULATOR_ON (0U) +#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry + * @{ + */ +#define PWR_SLEEPENTRY_WFI (0x01U) +#define PWR_SLEEPENTRY_WFE (0x02U) +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry + * @{ + */ +#define PWR_STOPENTRY_WFI (0x01U) +#define PWR_STOPENTRY_WFE (0x02U) +/** + * @} + */ + +/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale + * @{ + */ +#if defined(PWR_SRDCR_VOS) +#define PWR_REGULATOR_VOLTAGE_SCALE0 (PWR_SRDCR_VOS_1 | PWR_SRDCR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_SRDCR_VOS_1) +#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_SRDCR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE3 (0U) +#else +#define PWR_REGULATOR_VOLTAGE_SCALE0 (0U) +#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_D3CR_VOS_1 | PWR_D3CR_VOS_0) +#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_D3CR_VOS_1) +#define PWR_REGULATOR_VOLTAGE_SCALE3 (PWR_D3CR_VOS_0) +#endif /* PWR_SRDCR_VOS */ +/** + * @} + */ + +/** @defgroup PWR_Flag PWR Flag + * @{ + */ +/* PWR CPU flag */ +#define PWR_FLAG_STOP (0x01U) +#if defined (PWR_CPUCR_SBF_D2) +#define PWR_FLAG_SB_D1 (0x02U) +#define PWR_FLAG_SB_D2 (0x03U) +#endif /* defined (PWR_CPUCR_SBF_D2) */ +#define PWR_FLAG_SB (0x04U) +#if defined (DUAL_CORE) +#define PWR_FLAG_CPU_HOLD (0x05U) +#define PWR_FLAG_CPU2_HOLD (0x06U) +#define PWR_FLAG2_STOP (0x07U) +#define PWR_FLAG2_SB_D1 (0x08U) +#define PWR_FLAG2_SB_D2 (0x09U) +#define PWR_FLAG2_SB (0x0AU) +#endif /* defined (DUAL_CORE) */ +#define PWR_FLAG_PVDO (0x0BU) +#define PWR_FLAG_AVDO (0x0CU) +#define PWR_FLAG_ACTVOSRDY (0x0DU) +#define PWR_FLAG_ACTVOS (0x0EU) +#define PWR_FLAG_BRR (0x0FU) +#define PWR_FLAG_VOSRDY (0x10U) +#if defined (SMPS) +#define PWR_FLAG_SMPSEXTRDY (0x11U) +#else +#define PWR_FLAG_SCUEN (0x11U) +#endif /* defined (SMPS) */ +#if defined (PWR_CSR1_MMCVDO) +#define PWR_FLAG_MMCVDO (0x12U) +#endif /* defined (PWR_CSR1_MMCVDO) */ +#define PWR_FLAG_USB33RDY (0x13U) +#define PWR_FLAG_TEMPH (0x14U) +#define PWR_FLAG_TEMPL (0x15U) +#define PWR_FLAG_VBATH (0x16U) +#define PWR_FLAG_VBATL (0x17U) + +/* PWR Wake up flag */ +#define PWR_FLAG_WKUP1 PWR_WKUPCR_WKUPC1 +#define PWR_FLAG_WKUP2 PWR_WKUPCR_WKUPC2 +#define PWR_FLAG_WKUP3 PWR_WKUPCR_WKUPC3 +#define PWR_FLAG_WKUP4 PWR_WKUPCR_WKUPC4 +#define PWR_FLAG_WKUP5 PWR_WKUPCR_WKUPC5 +#define PWR_FLAG_WKUP6 PWR_WKUPCR_WKUPC6 +/** + * @} + */ + +/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask + * @{ + */ +#define PWR_EWUP_MASK (0x0FFF3F3FU) +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macro PWR Exported Macro + * @{ + */ + +/** @brief Configure the main internal regulator output voltage. + * @param __REGULATOR__ : Specifies the regulator output voltage to achieve a + * trade-off between performance and power consumption + * when the device does not operate at the maximum + * frequency (refer to the datasheet for more details). + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output + * Scale 0 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output + * Scale 1 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output + * Scale 2 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output + * Scale 3 mode. + * @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is + * only possible when Vcore is supplied from LDO (Low DropOut). The + * SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE() + * macro before configuring Voltage Scale 0 using + * __HAL_PWR_VOLTAGESCALING_CONFIG(). + * Transition to Voltage Scale 0 is only possible when the system is + * already in Voltage Scale 1. + * Transition from Voltage Scale 0 is only possible to Voltage Scale 1 + * then once in Voltage Scale 1 it is possible to switch to another + * voltage scale. + * After each regulator voltage setting, wait on VOSRDY flag to be set + * using macro __HAL_PWR_GET_FLAG(). + * To enter low power mode , and if current regulator voltage is + * Voltage Scale 0 then first switch to Voltage Scale 1 before entering + * low power mode. + * @retval None. + */ +#if defined (PWR_SRDCR_VOS) /* STM32H7Axxx and STM32H7Bxxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Configure the Voltage Scaling */ \ + MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS); \ + UNUSED(tmpreg); \ +} while(0) +#else /* 3 power domains devices */ +#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Check the voltage scaling to be configured */ \ + if((__REGULATOR__) == PWR_REGULATOR_VOLTAGE_SCALE0) \ + { \ + /* Configure the Voltage Scaling 1 */ \ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + /* Enable the PWR overdrive */ \ + SET_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Delay after setting the syscfg boost setting */ \ + tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + } \ + else \ + { \ + /* Disable the PWR overdrive */ \ + CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Delay after setting the syscfg boost setting */ \ + tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \ + /* Configure the Voltage Scaling x */ \ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + } \ + UNUSED(tmpreg); \ +} while(0) +#else /* STM32H72xxx and STM32H73xxx lines */ +#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \ +do { \ + __IO uint32_t tmpreg = 0x00; \ + /* Configure the Voltage Scaling */ \ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \ + /* Delay after setting the voltage scaling */ \ + tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \ + UNUSED(tmpreg); \ +} while(0) +#endif /* defined(SYSCFG_PWRCR_ODEN) */ +#endif /* defined (PWR_SRDCR_VOS) */ + +/** @brief Check PWR flags are set or not. + * @param __FLAG__ : Specifies the flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_PVDO : PVD Output. This flag is valid only if PVD + * is enabled by the HAL_PWR_EnablePVD() + * function. + * The PVD is stopped by STANDBY mode. For this + * reason, this bit is equal to 0 after STANDBY + * or reset until the PVDE bit is set. + * @arg PWR_FLAG_AVDO : AVD Output. This flag is valid only if AVD + * is enabled by the HAL_PWREx_EnableAVD() + * function. The AVD is stopped by STANDBY mode. + * For this reason, this bit is equal to 0 + * after STANDBY or reset until the AVDE bit + * is set. + * @arg PWR_FLAG_ACTVOSRDY : This flag indicates that the Regulator + * voltage scaling output selection is + * ready. + * @arg PWR_FLAG_BRR : Backup regulator ready flag. This bit is not + * reset when the device wakes up from STANDBY + * mode or by a system reset or power-on reset. + * @arg PWR_FLAG_VOSRDY : This flag indicates that the Regulator + * voltage scaling output selection is ready. + * mode or by a system reset or power-on reset. + * @arg PWR_FLAG_USB33RDY : This flag indicates that the USB supply + * from regulator is ready. + * @arg PWR_FLAG_TEMPH : This flag indicates that the temperature + * equal or above high threshold level. + * @arg PWR_FLAG_TEMPL : This flag indicates that the temperature + * equal or below low threshold level. + * @arg PWR_FLAG_VBATH : This flag indicates that VBAT level equal + * or above high threshold level. + * @arg PWR_FLAG_VBATL : This flag indicates that VBAT level equal + * or below low threshold level. + * @arg PWR_FLAG_STOP : This flag indicates that the system entered + * in STOP mode. + * @arg PWR_FLAG_SB : This flag indicates that the system entered in + * STANDBY mode. + * @arg PWR_FLAG_SB_D1 : This flag indicates that the D1 domain + * entered in STANDBY mode. + * @arg PWR_FLAG_SB_D2 : This flag indicates that the D2 domain + * entered in STANDBY mode. + * @arg PWR_FLAG2_STOP : This flag indicates that the system entered + * in STOP mode. + * @arg PWR_FLAG2_SB : This flag indicates that the system entered + * in STANDBY mode. + * @arg PWR_FLAG2_SB_D1 : This flag indicates that the D1 domain + * entered in STANDBY mode. + * @arg PWR_FLAG2_SB_D2 : This flag indicates that the D2 domain + * entered in STANDBY mode. + * @arg PWR_FLAG_CPU_HOLD : This flag indicates that the CPU1 wakes + * up with hold. + * @arg PWR_FLAG_CPU2_HOLD : This flag indicates that the CPU2 wakes + * up with hold. + * @arg PWR_FLAG_SMPSEXTRDY : This flag indicates that the SMPS + * External supply is sready. + * @arg PWR_FLAG_SCUEN : This flag indicates that the supply + * configuration update is enabled. + * @arg PWR_FLAG_MMCVDO : This flag indicates that the VDDMMC is + * above or equal to 1.2 V. + * @note The PWR_FLAG_PVDO, PWR_FLAG_AVDO, PWR_FLAG_ACTVOSRDY, PWR_FLAG_BRR, + * PWR_FLAG_VOSRDY, PWR_FLAG_USB33RDY, PWR_FLAG_TEMPH, PWR_FLAG_TEMPL, + * PWR_FLAG_VBATH, PWR_FLAG_VBATL, PWR_FLAG_STOP and PWR_FLAG_SB flags + * are used for all H7 family lines. + * The PWR_FLAG2_STOP, PWR_FLAG2_SB, PWR_FLAG2_SB_D1, PWR_FLAG2_SB_D2, + * PWR_FLAG_CPU_HOLD and PWR_FLAG_CPU2_HOLD flags are used only for H7 + * dual core lines. + * The PWR_FLAG_SB_D1 and PWR_FLAG_SB_D2 flags are used for all H7 + * family except STM32H7Axxx and STM32H7Bxxx lines. + * The PWR_FLAG_MMCVDO flag is used only for STM32H7Axxx and + * STM32H7Bxxx lines. + * The PWR_FLAG_SCUEN flag is used for devices that support only LDO + * regulator. + * The PWR_FLAG_SMPSEXTRDY flag is used for devices that support LDO + * and SMPS regulators. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#if defined (DUAL_CORE) /* Dual core lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_CPU_HOLD) ? ((PWR->CPU2CR & PWR_CPU2CR_HOLD1F) == PWR_CPU2CR_HOLD1F) :\ + ((__FLAG__) == PWR_FLAG_CPU2_HOLD) ? ((PWR->CPUCR & PWR_CPUCR_HOLD2F) == PWR_CPUCR_HOLD2F) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG2_SB) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF) == PWR_CPU2CR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG2_STOP) ? ((PWR->CPU2CR & PWR_CPU2CR_STOPF) == PWR_CPU2CR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG2_SB_D1) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D1) == PWR_CPU2CR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG2_SB_D2) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D2) == PWR_CPU2CR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* Single core lines */ +#if defined (PWR_CPUCR_SBF_D2) /* STM32H72x, STM32H73x, STM32H74x and STM32H75x lines */ +#if defined (SMPS) /* STM32H725 and STM32H735 lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_FLAG_SMPSEXTRDY) == PWR_FLAG_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* STM32H723, STM32H733, STM32H742, STM32H743, STM32H750 and STM32H753 lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\ + ((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#endif /* defined (SMPS) */ +#else /* STM32H7Axxx and STM32H7Bxxx lines */ +#if defined (SMPS) /* STM32H7AxxQ and STM32H7BxxQ lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\ + ((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#else /* STM32H7Axx and STM32H7Bxx lines */ +#define __HAL_PWR_GET_FLAG(__FLAG__) \ +(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\ + ((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\ + ((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\ + ((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\ + ((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\ + ((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\ + ((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\ + ((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\ + ((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\ + ((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\ + ((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\ + ((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\ + ((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\ + ((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL)) +#endif /* SMPS */ +#endif /* PWR_CPUCR_SBF_D2 */ +#endif /* DUAL_CORE */ + +/** @brief Check PWR wake up flags are set or not. + * @param __FLAG__: specifies the wake up flag to check. + * This parameter can be one of the following values: + * @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag. + * @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag. + * @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag. + * @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices + * that support GPIOI port. + * @retval The (__FLAG__) state (TRUE or FALSE). + */ +#define __HAL_PWR_GET_WAKEUPFLAG(__FLAG__) ((PWR->WKUPFR & (__FLAG__)) ? 0 : 1) + +#if defined (DUAL_CORE) +/** @brief Clear CPU PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with other families. + * @note This macro clear all CPU flags STOPF, SBF, SBF_D1, and SBF_D2. + * This parameter can be one of the following values : + * @arg PWR_CPU_FLAGS : Clear HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2 + * CPU flags. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) \ +do { \ + SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); \ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); \ +} while(0) +#else +/** @brief Clear CPU PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with other families. + * @note This macro clear all CPU flags. + * For single core devices except STM32H7Axxx and STM32H7Bxxx, CPU + * flags are STOPF, SBF, SBF_D1 and SBF_D2. + * For STM32H7Axxx and STM32H7Bxxx lines, CPU flags are STOPF and SBF. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF) +#endif /* defined (DUAL_CORE) */ + +/** @brief Clear PWR wake up flags. + * @param __FLAG__ : Specifies the wake up flag to be cleared. + * This parameter can be one of the following values : + * @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag. + * @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag. + * @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag. + * @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag. + * @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag. + * @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag. + * @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices + * that support GPIOI port. + * @retval None. + */ +#define __HAL_PWR_CLEAR_WAKEUPFLAG(__FLAG__) SET_BIT(PWR->WKUPCR, (__FLAG__)) + +/** + * @brief Enable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable the PVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable the PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable the PVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable event on PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable event on PVD EXTI D2 Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable event on PVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable event on PVD EXTI D2 Line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable the PVD Rising Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Rising Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Disable the PVD Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD) + +/** + * @brief Enable the PVD Rising & Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Disable the PVD Rising & Falling Interrupt Trigger. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Check whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) + +#if defined (DUAL_CORE) +/** + * @brief Checks whether the specified PVD EXTI interrupt flag is set or not. + * @retval EXTI D2 PVD Line Status. + */ +#define __HAL_PWR_PVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Clear the PVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) + +#if defined (DUAL_CORE) +/** + * @brief Clear the PVD EXTI D2 flag. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Generates a Software interrupt on PVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD) +/** + * @} + */ + +/* Include PWR HAL Extension module */ +#include "stm32h7xx_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +void HAL_PWR_DeInit (void); +void HAL_PWR_EnableBkUpAccess (void); +void HAL_PWR_DisableBkUpAccess (void); +/** + * @} + */ + +/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @{ + */ +/* Peripheral Control functions **********************************************/ +/* PVD configuration */ +void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD (void); +void HAL_PWR_DisablePVD (void); + +/* WakeUp pins configuration */ +void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity); +void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx); + +/* Low Power modes entry */ +void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry); +void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry); +void HAL_PWR_EnterSTANDBYMode (void); + +/* Power PVD IRQ Handler */ +void HAL_PWR_PVD_IRQHandler (void); +void HAL_PWR_PVDCallback (void); + +/* Cortex System Control functions *******************************************/ +void HAL_PWR_EnableSleepOnExit (void); +void HAL_PWR_DisableSleepOnExit (void); +void HAL_PWR_EnableSEVOnPend (void); +void HAL_PWR_DisableSEVOnPend (void); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line + * @{ + */ +#define PWR_EXTI_LINE_PVD EXTI_IMR1_IM16 /*!< External interrupt line 16 + Connected to the PVD EXTI Line */ +/** + * @} + */ + +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters + * @{ + */ +/* Check PVD level parameter */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) ||\ + ((LEVEL) == PWR_PVDLEVEL_1) ||\ + ((LEVEL) == PWR_PVDLEVEL_2) ||\ + ((LEVEL) == PWR_PVDLEVEL_3) ||\ + ((LEVEL) == PWR_PVDLEVEL_4) ||\ + ((LEVEL) == PWR_PVDLEVEL_5) ||\ + ((LEVEL) == PWR_PVDLEVEL_6) ||\ + ((LEVEL) == PWR_PVDLEVEL_7)) + +/* Check PVD mode parameter */ +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) ||\ + ((MODE) == PWR_PVD_MODE_NORMAL)) + +/* Check low power regulator parameter */ +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) ||\ + ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) + +/* Check low power mode entry parameter */ +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) ||\ + ((ENTRY) == PWR_SLEEPENTRY_WFE)) + +/* Check low power mode entry parameter */ +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) ||\ + ((ENTRY) == PWR_STOPENTRY_WFE)) + +/* Check voltage scale level parameter */ +#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE0) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ + ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32H7xx_HAL_PWR_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h new file mode 100644 index 0000000..61c7609 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h @@ -0,0 +1,789 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_PWR_EX_H +#define STM32H7xx_HAL_PWR_EX_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWREx_Exported_Types PWREx Exported Types + * @{ + */ +/** + * @brief PWREx AVD configuration structure definition + */ +typedef struct +{ + uint32_t AVDLevel; /*!< AVDLevel : Specifies the AVD detection level. This + parameter can be a value of @ref + PWREx_AVD_detection_level + */ + + uint32_t Mode; /*!< Mode : Specifies the EXTI operating mode for the AVD + event. This parameter can be a value of @ref + PWREx_AVD_Mode. + */ +}PWREx_AVDTypeDef; + +/** + * @brief PWREx Wakeup pin configuration structure definition + */ +typedef struct +{ + uint32_t WakeUpPin; /*!< WakeUpPin: Specifies the Wake-Up pin to be enabled. + This parameter can be a value of @ref + PWREx_WakeUp_Pins + */ + + uint32_t PinPolarity; /*!< PinPolarity: Specifies the Wake-Up pin polarity. + This parameter can be a value of @ref + PWREx_PIN_Polarity + */ + + uint32_t PinPull; /*!< PinPull: Specifies the Wake-Up pin pull. This + parameter can be a value of @ref + PWREx_PIN_Pull + */ +}PWREx_WakeupPinTypeDef; + +#if defined (PWR_CSR1_MMCVDO) +/** + * @brief PWR VDDMMC voltage level enum definition + */ +typedef enum +{ + PWR_MMC_VOLTAGE_BELOW_1V2, /*!< VDDMMC is below 1V2 */ + PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2 /*!< VDDMMC is above or equal 1V2 */ +} PWREx_MMC_VoltageLevel; +#endif /* defined (PWR_CSR1_MMCVDO) */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWREx Exported Constants + * @{ + */ +/** @defgroup PWREx_WakeUp_Pins PWREx Wake-Up Pins + * @{ + */ +/* High level and No pull (default configuration) */ +#define PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6 +#if defined (PWR_WKUPEPR_WKUPEN5) +#define PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5 +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +#define PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 +#if defined (PWR_WKUPEPR_WKUPEN3) +#define PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +#define PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 +#define PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 + +/* High level and No pull */ +#define PWR_WAKEUP_PIN6_HIGH PWR_WKUPEPR_WKUPEN6 +#if defined (PWR_WKUPEPR_WKUPEN5) +#define PWR_WAKEUP_PIN5_HIGH PWR_WKUPEPR_WKUPEN5 +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +#define PWR_WAKEUP_PIN4_HIGH PWR_WKUPEPR_WKUPEN4 +#if defined (PWR_WKUPEPR_WKUPEN3) +#define PWR_WAKEUP_PIN3_HIGH PWR_WKUPEPR_WKUPEN3 +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +#define PWR_WAKEUP_PIN2_HIGH PWR_WKUPEPR_WKUPEN2 +#define PWR_WAKEUP_PIN1_HIGH PWR_WKUPEPR_WKUPEN1 + +/* Low level and No pull */ +#define PWR_WAKEUP_PIN6_LOW (PWR_WKUPEPR_WKUPP6 | PWR_WKUPEPR_WKUPEN6) +#if defined (PWR_WKUPEPR_WKUPP5) +#define PWR_WAKEUP_PIN5_LOW (PWR_WKUPEPR_WKUPP5 | PWR_WKUPEPR_WKUPEN5) +#endif /* defined (PWR_WKUPEPR_WKUPP5) */ +#define PWR_WAKEUP_PIN4_LOW (PWR_WKUPEPR_WKUPP4 | PWR_WKUPEPR_WKUPEN4) +#if defined (PWR_WKUPEPR_WKUPP3) +#define PWR_WAKEUP_PIN3_LOW (PWR_WKUPEPR_WKUPP3 | PWR_WKUPEPR_WKUPEN3) +#endif /* defined (PWR_WKUPEPR_WKUPP3) */ +#define PWR_WAKEUP_PIN2_LOW (PWR_WKUPEPR_WKUPP2 | PWR_WKUPEPR_WKUPEN2) +#define PWR_WAKEUP_PIN1_LOW (PWR_WKUPEPR_WKUPP1 | PWR_WKUPEPR_WKUPEN1) +/** + * @} + */ + +/** @defgroup PWREx_PIN_Polarity PWREx Pin Polarity configuration + * @{ + */ +#define PWR_PIN_POLARITY_HIGH (0x00000000U) +#define PWR_PIN_POLARITY_LOW (0x00000001U) +/** + * @} + */ + +/** @defgroup PWREx_PIN_Pull PWREx Pin Pull configuration + * @{ + */ +#define PWR_PIN_NO_PULL (0x00000000U) +#define PWR_PIN_PULL_UP (0x00000001U) +#define PWR_PIN_PULL_DOWN (0x00000002U) +/** + * @} + */ + +/** @defgroup PWREx_Wakeup_Pins_Flags PWREx Wakeup Pins Flags. + * @{ + */ +#define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */ +#define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */ +#if defined (PWR_WKUPFR_WKUPF3) +#define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */ +#endif /* defined (PWR_WKUPFR_WKUPF3) */ +#define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */ +#if defined (PWR_WKUPFR_WKUPF5) +#define PWR_WAKEUP_FLAG5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */ +#endif /* defined (PWR_WKUPFR_WKUPF5) */ +#define PWR_WAKEUP_FLAG6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */ +#if defined (PWR_WKUPFR_WKUPF3) +#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ + PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4 |\ + PWR_WKUPFR_WKUPF5 | PWR_WKUPFR_WKUPF6) +#else +#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\ + PWR_WKUPFR_WKUPF4 | PWR_WKUPFR_WKUPF6) +#endif /* defined (PWR_WKUPFR_WKUPF3) */ +/** + * @} + */ + +#if defined (DUAL_CORE) +/** @defgroup PWREx_Core_Select PWREx Core definition + * @{ + */ +#define PWR_CORE_CPU1 (0x00000000U) +#define PWR_CORE_CPU2 (0x00000001U) +/** + * @} + */ +#endif /* defined (DUAL_CORE) */ + +/** @defgroup PWREx_Domains PWREx Domains definition + * @{ + */ +#define PWR_D1_DOMAIN (0x00000000U) +#if defined (PWR_CPUCR_PDDS_D2) +#define PWR_D2_DOMAIN (0x00000001U) +#endif /* defined (PWR_CPUCR_PDDS_D2) */ +#define PWR_D3_DOMAIN (0x00000002U) +/** + * @} + */ + +/** @defgroup PWREx_Domain_Flags PWREx Domain Flags definition + * @{ + */ +#if defined (DUAL_CORE) +#define PWR_D1_DOMAIN_FLAGS (0x00000000U) +#define PWR_D2_DOMAIN_FLAGS (0x00000001U) +#define PWR_ALL_DOMAIN_FLAGS (0x00000002U) +#else +#define PWR_CPU_FLAGS (0x00000000U) +#endif /* defined (DUAL_CORE) */ +/** + * @} + */ + +/** @defgroup PWREx_D3_State PWREx D3 Domain State + * @{ + */ +#define PWR_D3_DOMAIN_STOP (0x00000000U) +#define PWR_D3_DOMAIN_RUN (0x00000800U) + +/** + * @} + */ + +/** @defgroup PWREx_Supply_configuration PWREx Supply configuration + * @{ + */ +#define PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are supplied from the LDO */ +#if defined (SMPS) +#define PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are supplied from the SMPS only */ +#define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ +#define PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */ +#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */ +#define PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */ +#endif /* defined (SMPS) */ +#define PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS /*!< The SMPS disabled and the LDO Bypass. The Core domains are supplied from an external source */ + +#if defined (SMPS) +#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | \ + PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS) +#else +#define PWR_SUPPLY_CONFIG_MASK (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS) +#endif /* defined (SMPS) */ +/** + * @} + */ + + +/** @defgroup PWREx_AVD_detection_level PWREx AVD detection level + * @{ + */ +#define PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0 /*!< Analog voltage detector level 0 + selection : 1V7 */ +#define PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1 /*!< Analog voltage detector level 1 + selection : 2V1 */ +#define PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2 /*!< Analog voltage detector level 2 + selection : 2V5 */ +#define PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3 /*!< Analog voltage detector level 3 + selection : 2V8 */ +/** + * @} + */ + +/** @defgroup PWREx_AVD_Mode PWREx AVD Mode + * @{ + */ +#define PWR_AVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_AVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define PWR_AVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define PWR_AVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */ +#define PWR_AVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */ +#define PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */ +/** + * @} + */ + +/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale + * @{ + */ +#define PWR_REGULATOR_SVOS_SCALE5 (PWR_CR1_SVOS_0) +#define PWR_REGULATOR_SVOS_SCALE4 (PWR_CR1_SVOS_1) +#define PWR_REGULATOR_SVOS_SCALE3 (PWR_CR1_SVOS_0 | PWR_CR1_SVOS_1) +/** + * @} + */ + +/** @defgroup PWREx_VBAT_Battery_Charging_Resistor PWR battery charging resistor selection + * @{ + */ +#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x00000000U) /*!< VBAT charging through a 5 kOhms resistor */ +#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR3_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */ +/** + * @} + */ + +/** @defgroup PWREx_VBAT_Thresholds PWREx VBAT Thresholds + * @{ + */ +#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U) +#define PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CR2_VBATL +#define PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CR2_VBATH +/** + * @} + */ + +/** @defgroup PWREx_TEMP_Thresholds PWREx Temperature Thresholds + * @{ + */ +#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U) +#define PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CR2_TEMPL +#define PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CR2_TEMPH +/** + * @} + */ +/** @defgroup PWREx_AVD_EXTI_Line PWREx AVD EXTI Line 16 + * @{ + */ +#define PWR_EXTI_LINE_AVD EXTI_IMR1_IM16 /*!< External interrupt line 16 + Connected to the AVD EXTI Line */ +/** + * @} + */ + +#if defined (PWR_CR1_SRDRAMSO) +/** @defgroup PWREx_Memory_Shut_Off Memory shut-off block selection + * @{ + */ +#define PWR_SRD_AHB_MEMORY_BLOCK PWR_CR1_SRDRAMSO /*!< SmartRun domain AHB memory shut-off in DStop/DStop2 low-power mode */ +#define PWR_USB_FDCAN_MEMORY_BLOCK PWR_CR1_HSITFSO /*!< High-speed interfaces USB and FDCAN memories shut-off in DStop/DStop2 mode */ +#define PWR_GFXMMU_JPEG_MEMORY_BLOCK PWR_CR1_GFXSO /*!< GFXMMU and JPEG memories shut-off in DStop/DStop2 mode */ +#define PWR_TCM_ECM_MEMORY_BLOCK PWR_CR1_ITCMSO /*!< Instruction TCM and ETM memories shut-off in DStop/DStop2 mode */ +#define PWR_RAM1_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM1SO /*!< AHB RAM1 shut-off in DStop/DStop2 mode */ +#define PWR_RAM2_AHB_MEMORY_BLOCK PWR_CR1_AHBRAM2SO /*!< AHB RAM2 shut-off in DStop/DStop2 mode */ +#define PWR_RAM1_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM1SO /*!< AXI RAM1 shut-off in DStop/DStop2 mode */ +#define PWR_RAM2_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM2SO /*!< AXI RAM2 shut-off in DStop/DStop2 mode */ +#define PWR_RAM3_AXI_MEMORY_BLOCK PWR_CR1_AXIRAM3SO /*!< AXI RAM3 shut-off in DStop/DStop2 mode */ +#define PWR_MEMORY_BLOCK_KEEP_ON 0U /*!< Memory content is kept in DStop or DStop2 mode */ +#define PWR_MEMORY_BLOCK_SHUT_OFF 1U /*!< Memory content is lost in DStop or DStop2 mode */ +/** + * @} + */ +#endif /* defined (PWR_CR1_SRDRAMSO) */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Macro PWREx Exported Macro + * @{ + */ + +/** + * @brief Enable the AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable the AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable the AVD EXTI Line 16 + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable the AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable event on AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Enable event on AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Disable event on AVD EXTI Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Disable event on AVD EXTI D2 Line 16. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Enable the AVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Disable the AVD Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD) + +/** + * @brief Enable the AVD Extended Interrupt Rising and Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Disable the AVD Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \ +do { \ + __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); \ +} while(0); + +/** + * @brief Check whether the specified AVD EXTI interrupt flag is set or not. + * @retval EXTI AVD Line Status. + */ +#define __HAL_PWR_AVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL) + +#if defined (DUAL_CORE) +/** + * @brief Check whether the specified AVD EXTI D2 interrupt flag is set or not. + * @retval EXTI D2 AVD Line Status. + */ +#define __HAL_PWR_AVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Clear the AVD EXTI flag. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) + +#if defined (DUAL_CORE) +/** + * @brief Clear the AVD EXTI D2 flag. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_AVD) +#endif /* defined (DUAL_CORE) */ + +/** + * @brief Generates a Software interrupt on AVD EXTI line. + * @retval None. + */ +#define __HAL_PWR_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_AVD) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions + * @{ + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource); +uint32_t HAL_PWREx_GetSupplyConfig (void); +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetVoltageRange (void); +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling); +uint32_t HAL_PWREx_GetStopModeVoltageRange (void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group2 Low Power Control Functions + * @{ + */ +/* System low power control functions */ +#if defined (PWR_CPUCR_RETDS_CD) +void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry); +#endif /* defined (PWR_CPUCR_RETDS_CD) */ +void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain); +void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain); +void HAL_PWREx_ConfigD3Domain (uint32_t D3State); +/* Clear Cortex-Mx pending flag */ +void HAL_PWREx_ClearPendingEvent (void); +#if defined (DUAL_CORE) +/* Clear domain flags */ +void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags); +/* Core Hold/Release functions */ +HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU); +void HAL_PWREx_ReleaseCore (uint32_t CPU); +#endif /* defined (DUAL_CORE) */ +/* Flash low power control functions */ +void HAL_PWREx_EnableFlashPowerDown (void); +void HAL_PWREx_DisableFlashPowerDown (void); +#if defined (PWR_CR1_SRDRAMSO) +/* Memory shut-off functions */ +void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock); +void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock); +#endif /* defined(PWR_CR1_SRDRAMSO) */ +/* Wakeup Pins control functions */ +void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams); +void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin); +uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag); +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag); +/* Power Wakeup PIN IRQ Handler */ +void HAL_PWREx_WAKEUP_PIN_IRQHandler (void); +void HAL_PWREx_WKUP1_Callback (void); +void HAL_PWREx_WKUP2_Callback (void); +#if defined (PWR_WKUPEPR_WKUPEN3) +void HAL_PWREx_WKUP3_Callback (void); +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +void HAL_PWREx_WKUP4_Callback (void); +#if defined (PWR_WKUPEPR_WKUPEN5) +void HAL_PWREx_WKUP5_Callback (void); +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +void HAL_PWREx_WKUP6_Callback (void); +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals control functions + * @{ + */ +/* Backup regulator control functions */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void); +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void); +/* USB regulator control functions */ +HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void); +HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void); +void HAL_PWREx_EnableUSBVoltageDetector (void); +void HAL_PWREx_DisableUSBVoltageDetector (void); +/* Battery control functions */ +void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue); +void HAL_PWREx_DisableBatteryCharging (void); +#if defined (PWR_CR1_BOOSTE) +/* Analog Booster functions */ +void HAL_PWREx_EnableAnalogBooster (void); +void HAL_PWREx_DisableAnalogBooster (void); +#endif /* PWR_CR1_BOOSTE */ +/** + * @} + */ + +/** @addtogroup PWREx_Exported_Functions_Group4 Power Monitoring functions + * @{ + */ +/* Power VBAT/Temperature monitoring functions */ +void HAL_PWREx_EnableMonitoring (void); +void HAL_PWREx_DisableMonitoring (void); +uint32_t HAL_PWREx_GetTemperatureLevel (void); +uint32_t HAL_PWREx_GetVBATLevel (void); +#if defined (PWR_CSR1_MMCVDO) +PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void); +#endif /* PWR_CSR1_MMCVDO */ +/* Power AVD configuration functions */ +void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD); +void HAL_PWREx_EnableAVD (void); +void HAL_PWREx_DisableAVD (void); +/* Power PVD/AVD IRQ Handler */ +void HAL_PWREx_PVD_AVD_IRQHandler (void); +void HAL_PWREx_AVDCallback (void); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PWREx_Private_Macros PWREx Private Macros + * @{ + */ + +/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters + * @{ + */ +/* Check PWR regulator configuration parameter */ +#if defined (SMPS) +#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_DIRECT_SMPS_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) ||\ + ((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT) ||\ + ((PWR_SOURCE) == PWR_SMPS_2V5_SUPPLIES_EXT) ||\ + ((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY)) + +#else +#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\ + ((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY)) +#endif /* defined (SMPS) */ + +/* Check PWR regulator configuration in STOP mode parameter */ +#define IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE3) ||\ + ((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE4) ||\ + ((VOLTAGE) == PWR_REGULATOR_SVOS_SCALE5)) + +/* Check PWR domain parameter */ +#if defined (PWR_CPUCR_PDDS_D2) +#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\ + ((DOMAIN) == PWR_D2_DOMAIN) ||\ + ((DOMAIN) == PWR_D3_DOMAIN)) +#else +#define IS_PWR_DOMAIN(DOMAIN) (((DOMAIN) == PWR_D1_DOMAIN) ||\ + ((DOMAIN) == PWR_D3_DOMAIN)) +#endif /* defined (PWR_CPUCR_PDDS_D2) */ + +/* Check D3/SRD domain state parameter */ +#define IS_D3_STATE(STATE) (((STATE) == PWR_D3_DOMAIN_STOP) ||\ + ((STATE) == PWR_D3_DOMAIN_RUN)) + +/* Check wake up pin parameter */ +#if defined (PWR_WKUPEPR_WKUPEN3) +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ + ((PIN) == PWR_WAKEUP_PIN2) ||\ + ((PIN) == PWR_WAKEUP_PIN3) ||\ + ((PIN) == PWR_WAKEUP_PIN4) ||\ + ((PIN) == PWR_WAKEUP_PIN5) ||\ + ((PIN) == PWR_WAKEUP_PIN6) ||\ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN3_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN5_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN1_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN2_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN3_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN4_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN5_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN6_LOW)) +#else +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) ||\ + ((PIN) == PWR_WAKEUP_PIN2) ||\ + ((PIN) == PWR_WAKEUP_PIN4) ||\ + ((PIN) == PWR_WAKEUP_PIN6) ||\ + ((PIN) == PWR_WAKEUP_PIN1_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN2_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN4_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN6_HIGH) ||\ + ((PIN) == PWR_WAKEUP_PIN1_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN2_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN4_LOW) ||\ + ((PIN) == PWR_WAKEUP_PIN6_LOW)) +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ + +/* Check wake up pin polarity parameter */ +#define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\ + ((POLARITY) == PWR_PIN_POLARITY_LOW)) + +/* Check wake up pin pull configuration parameter */ +#define IS_PWR_WAKEUP_PIN_PULL(PULL) (((PULL) == PWR_PIN_NO_PULL) ||\ + ((PULL) == PWR_PIN_PULL_UP) ||\ + ((PULL) == PWR_PIN_PULL_DOWN)) + +/* Check wake up flag parameter */ +#if defined (PWR_WKUPEPR_WKUPEN3) +#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ + ((FLAG) == PWR_WAKEUP_FLAG2) ||\ + ((FLAG) == PWR_WAKEUP_FLAG3) ||\ + ((FLAG) == PWR_WAKEUP_FLAG4) ||\ + ((FLAG) == PWR_WAKEUP_FLAG5) ||\ + ((FLAG) == PWR_WAKEUP_FLAG6) ||\ + ((FLAG) == PWR_WAKEUP_FLAG_ALL)) +#else +#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\ + ((FLAG) == PWR_WAKEUP_FLAG2) ||\ + ((FLAG) == PWR_WAKEUP_FLAG4) ||\ + ((FLAG) == PWR_WAKEUP_FLAG6) ||\ + ((FLAG) == PWR_WAKEUP_FLAG_ALL)) +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ + +/* Check wake up flag parameter */ +#define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_0) ||\ + ((LEVEL) == PWR_AVDLEVEL_1) ||\ + ((LEVEL) == PWR_AVDLEVEL_2) ||\ + ((LEVEL) == PWR_AVDLEVEL_3)) + +/* Check AVD mode parameter */ +#define IS_PWR_AVD_MODE(MODE) (((MODE) == PWR_AVD_MODE_IT_RISING) ||\ + ((MODE) == PWR_AVD_MODE_IT_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_RISING) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_FALLING) ||\ + ((MODE) == PWR_AVD_MODE_NORMAL) ||\ + ((MODE) == PWR_AVD_MODE_EVENT_RISING_FALLING)) + +/* Check resistor battery parameter */ +#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\ + ((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5)) +/* Check D1/CD CPU ID parameter */ +#define IS_PWR_D1_CPU(CPU) ((CPU) == CM7_CPUID) + +#if defined (DUAL_CORE) +/* Check CPU parameter */ +#define IS_PWR_CORE(CPU) (((CPU) == PWR_CORE_CPU1) || ((CPU) == PWR_CORE_CPU2)) + +/* Check D2 CPU ID parameter */ +#define IS_PWR_D2_CPU(CPU) ((CPU) == CM4_CPUID) + +/* Check PWR domain flag parameter */ +#define IS_PWR_DOMAIN_FLAG(FLAG) (((FLAG) == PWR_D1_DOMAIN_FLAGS) || \ + ((FLAG) == PWR_D2_DOMAIN_FLAGS) || \ + ((FLAG) == PWR_ALL_DOMAIN_FLAGS)) +#endif /* defined (DUAL_CORE) */ + +#if defined (PWR_CR1_SRDRAMSO) +/* Check memory block parameter */ +#define IS_PWR_MEMORY_BLOCK(BLOCK) (((BLOCK) == PWR_SRD_AHB_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_USB_FDCAN_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_GFXMMU_JPEG_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_TCM_ECM_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM1_AHB_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM2_AHB_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM1_AXI_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM2_AXI_MEMORY_BLOCK) || \ + ((BLOCK) == PWR_RAM3_AXI_MEMORY_BLOCK)) +#endif /* defined (PWR_CR1_SRDRAMSO) */ +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* STM32H7xx_HAL_PWR_EX_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h new file mode 100644 index 0000000..1626c6d --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h @@ -0,0 +1,8266 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_RCC_H +#define STM32H7xx_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC PLL configuration structure definition + */ +typedef struct +{ + uint32_t PLLState; /*!< The new state of the PLL. + This parameter can be a value of @ref RCC_PLL_Config */ + + uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. + This parameter must be a value of @ref RCC_PLL_Clock_Source */ + + uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 63 */ + + uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + or between Min_Data = 8 and Max_Data = 420(*) + (*) : For stm32h7a3xx and stm32h7b3xx family lines. */ + + uint32_t PLLP; /*!< PLLP: Division factor for system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed */ + + uint32_t PLLQ; /*!< PLLQ: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLLR; /*!< PLLR: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + uint32_t PLLRGE; /*!AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* JPEG */ + +#define __HAL_RCC_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI1 */ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OSPI2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPI2 */ +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_IOMNGREN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_IOMNGREN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OTFDEC1 */ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_OTFDEC2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* OTFDEC2 */ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_GFXMMUEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_GFXMMUEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* GFXMMU */ +#define __HAL_RCC_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_MDMA_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN)) +#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN)) +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN)) +#endif /* JPEG */ +#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN)) + +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN)) +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OSPI1EN)) +#endif /* OCTOSPII */ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OSPI2EN)) +#endif /* OCTOSPI2 */ +#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN)) +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_IOMNGREN)) +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OTFDEC1EN)) +#endif /* OTOFDEC1 */ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_OTFDEC2EN)) +#endif /* OTOFDEC2 */ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_DISABLE() (RCC->AHB3ENR &= ~ (RCC_AHB3ENR_GFXMMUEN)) +#endif /* GFXMMU */ + +/** @brief Get the enable or disable status of the AHB3 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_MDMA_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_MDMAEN) != 0U) +#define __HAL_RCC_DMA2D_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_DMA2DEN) != 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_JPGDECEN) != 0U) +#endif /* JPEG */ +#define __HAL_RCC_FMC_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_FMCEN) != 0U) +#if defined (QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_QSPIEN) != 0U) +#endif /* QUADSPI */ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI1EN) != 0U) +#endif /* OCTOSPII */ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI2EN) != 0U) +#endif /* OCTOSPI2 */ +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_SDMMC1EN) != 0U) +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_IOMNGREN) != 0U) +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC1EN) != 0U) +#endif /* OTOFDEC1 */ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC2EN) != 0U) +#endif /* OTOFDEC2 */ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_ENABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_GFXMMUEN) != 0U) +#endif /* GFXMMU */ + +#define __HAL_RCC_MDMA_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_MDMAEN) == 0U) +#define __HAL_RCC_DMA2D_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_DMA2DEN) == 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDECEN_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_JPGDECEN) == 0U) +#endif /* JPEG */ +#define __HAL_RCC_FMC_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_FMCEN) == 0U) +#if defined (QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_QSPIEN) == 0U) +#endif /* QUADSPI */ +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_SDMMC1EN) == 0U) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI1EN) == 0U) +#endif +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OSPI2EN) == 0U) +#endif +#if defined(OCTOSPIM) +#define __HAL_RCC_OCTOSPIM_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_IOMNGREN) == 0U) +#endif +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC1EN) == 0U) +#endif +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_OTFDEC2EN) == 0U) +#endif +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_DISABLED() ((RCC->AHB3ENR & RCC_AHB3ENR_GFXMMUEN) == 0U) +#endif +/** @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DUAL_CORE*/ + +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#define __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN)) +#define __HAL_RCC_ADC12_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN)) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ARTEN)) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_CRCEN)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN)) +#define __HAL_RCC_ETH1TX_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN)) +#define __HAL_RCC_ETH1RX_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN)) +#endif +#define __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN)) +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN)) +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN)) +#endif /* USB2_OTG_FS */ + +/** @brief Get the enable or disable status of the AHB1 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA1EN) != 0U) +#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA2EN) != 0U) +#define __HAL_RCC_ADC12_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ADC12EN) != 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ARTEN) != 0U) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_CRCEN) != 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1MACEN) != 0U) +#define __HAL_RCC_ETH1TX_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1TXEN) != 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1RXEN) != 0U) +#endif +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSEN) != 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSULPIEN) != 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSEN) != 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSULPIEN) != 0U) +#endif /* USB2_OTG_FS */ + +#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA1EN) == 0U) +#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA2EN) == 0U) +#define __HAL_RCC_ADC12_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ADC12EN) == 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ARTEN) == 0U) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_CRCEN) == 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1MACEN) == 0U) +#define __HAL_RCC_ETH1TX_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1TXEN) == 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_ETH1RXEN) == 0U) +#endif +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSEN) == 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB1OTGHSULPIEN) == 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSEN) == 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_USB2OTGHSULPIEN) == 0U) +#endif /* USB2_OTG_FS */ + +/** @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMI_PSSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMI_PSSIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DCMI_CLK_ENABLE() __HAL_RCC_DCMI_PSSI_CLK_ENABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* DCMI && PSSI */ + +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_FMACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_FMACEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* FMAC */ + +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CORDICEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CORDIC */ + +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) +#else +#define __HAL_RCC_AHBSRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ + +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#else +#define __HAL_RCC_AHBSRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_AHBSRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ + +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* RCC_AHB2ENR_HSEMEN */ + +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_BDMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_BDMA1EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* BDMA1 */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_DCMI_PSSIEN)) +#define __HAL_RCC_DCMI_CLK_DISABLE() __HAL_RCC_DCMI_PSSI_CLK_DISABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN)) +#endif /* HASH */ +#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN)) +#define __HAL_RCC_SDMMC2_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN)) +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_FMACEN)) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_CORDICEN)) +#endif /* CORDIC */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN)) +#else +#define __HAL_RCC_AHBSRAM1_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_AHBSRAM1EN)) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN)) +#else +#define __HAL_RCC_AHBSRAM2_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_AHBSRAM2EN)) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN)) +#endif +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_HSEMEN)) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_CLK_DISABLE() (RCC->AHB2ENR &= ~ (RCC_AHB2ENR_BDMA1EN)) +#endif + +/** @brief Get the enable or disable status of the AHB2 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMI_PSSIEN) != 0U) +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_ENABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMIEN) != 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CRYPEN) != 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HASHEN) != 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_RNGEN) != 0U) +#define __HAL_RCC_SDMMC2_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_SDMMC2EN) != 0U) +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_FMACEN) != 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CORDICEN) != 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM1EN) != 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM1EN) != 0U) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM2EN) != 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM2EN) != 0U) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM3EN) != 0U) +#endif +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HSEMEN) != 0U) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_IS_CLK_ENABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_BDMA1EN) != 0U) +#endif + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMI_PSSIEN) == 0U) +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_DISABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_DCMIEN) == 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CRYPEN) == 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HASHEN) == 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_RNGEN) == 0U) +#define __HAL_RCC_SDMMC2_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_SDMMC2EN) == 0U) +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_FMACEN) == 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_CORDICEN) == 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define __HAL_RCC_D2SRAM1_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM1EN) == 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM1EN) == 0U) +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define __HAL_RCC_D2SRAM2_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM2EN) == 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_AHBSRAM2EN) == 0U) +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define __HAL_RCC_D2SRAM3_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_D2SRAM3EN) == 0U) +#endif +#if defined(RCC_AHB2ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_HSEMEN) == 0U) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_IS_CLK_DISABLED() ((RCC->AHB2ENR & RCC_AHB2ENR_BDMA1EN) == 0U) +#endif + +/** @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* GPIOI */ + +#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_BDMA_CLK_ENABLE() __HAL_RCC_BDMA2_CLK_ENABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_SRDSRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_SRDSRAMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif + +#define __HAL_RCC_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN) +#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN) +#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN) +#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN) +#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN) +#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN) +#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN) +#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN) +#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN) +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMA2EN) +#define __HAL_RCC_BDMA_CLK_DISABLE() __HAL_RCC_BDMA2_CLK_DISABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN) +#endif +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN) +#endif +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_SRDSRAMEN) +#endif +#define __HAL_RCC_BKPRAM_CLK_DISABLE() (RCC->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN) + + +/** @brief Get the enable or disable status of the AHB4 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOAEN) != 0U) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOBEN) != 0U) +#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOCEN) != 0U) +#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIODEN) != 0U) +#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOEEN) != 0U) +#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOFEN) != 0U) +#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOGEN) != 0U) +#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOHEN) != 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOIEN) != 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOJEN) != 0U) +#define __HAL_RCC_GPIOK_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOKEN) != 0U) +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_CRCEN) != 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMA2EN) != 0U) +#define __HAL_RCC_BDMA_IS_CLK_ENABLED() __HAL_RCC_BDMA2_IS_CLK_ENABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMAEN) != 0U) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_ADC3EN) != 0U) +#endif +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_HSEMEN) != 0U) +#endif +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_SRDSRAMEN) != 0U) +#endif +#define __HAL_RCC_BKPRAM_IS_CLK_ENABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BKPRAMEN) != 0U) + +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOAEN) == 0U) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOBEN) == 0U) +#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOCEN) == 0U) +#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIODEN) == 0U) +#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOEEN) == 0U) +#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOFEN) == 0U) +#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOGEN) == 0U) +#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOHEN) == 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOIEN) == 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOJEN) == 0U) +#define __HAL_RCC_GPIOK_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_GPIOKEN) == 0U) + +#if defined(RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_CRCEN) == 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMA2EN) == 0U) +#define __HAL_RCC_BDMA_IS_CLK_DISABLED() __HAL_RCC_BDMA2_IS_CLK_DISABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BDMAEN) == 0U) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_ADC3EN) == 0U) +#endif +#if defined(RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_HSEM_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_HSEMEN) == 0U) +#endif +#if defined(RCC_AHB4ENR_SRDSRAMEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_SRDSRAMEN) == 0U) +#endif +#define __HAL_RCC_BKPRAM_IS_CLK_DISABLED() ((RCC->AHB4ENR & RCC_AHB4ENR_BKPRAMEN) == 0U) + + +/** @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB3ENR, RCC_APB3ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* LTDC */ + +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB3ENR, RCC_APB3ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DSI*/ + +#define __HAL_RCC_WWDG1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_DISABLE() (RCC->APB3ENR) &= ~ (RCC_APB3ENR_DSIEN) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_CLK_DISABLE() (RCC->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN) + +/** @brief Get the enable or disable status of the APB3 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_ENABLED() ((RCC->APB3ENR & RCC_APB3ENR_LTDCEN) != 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_ENABLED() ((RCC->APB3ENR & RCC_APB3ENR_DSIEN) != 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_ENABLED() ((RCC->APB3ENR & RCC_APB3ENR_WWDG1EN) != 0U) +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_DISABLED() ((RCC->APB3ENR & RCC_APB3ENR_LTDCEN) == 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_DISABLED() ((RCC->APB3ENR & RCC_APB3ENR_DSIEN) == 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_DISABLED() ((RCC->APB3ENR & RCC_APB3ENR_WWDG1EN) == 0U) + + +/** @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_I2C5EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* I2C5 */ + +#define __HAL_RCC_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DAC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_DAC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_DAC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1LENR, RCC_APB1LENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1LENR, RCC_APB1LENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SWPMI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_FDCANEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM23EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM23EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM23 */ + +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM24EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB1HENR, RCC_APB1HENR_TIM24EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* TIM24 */ + +#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN) +#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN) +#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN) +#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN) +#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN) +#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN) +#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN) +#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN) +#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN) +#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_WWDG2EN) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN) +#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN) +#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN) +#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN) +#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN) +#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN) +#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN) +#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN) +#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN) +#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN) +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_I2C5EN) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_CECEN) +#define __HAL_RCC_DAC12_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN) +#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN) +#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN) +#define __HAL_RCC_CRS_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN) +#define __HAL_RCC_SWPMI1_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN) +#define __HAL_RCC_OPAMP_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN) +#define __HAL_RCC_MDIOS_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN) +#define __HAL_RCC_FDCAN_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN) +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_TIM23EN) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_DISABLE() (RCC->APB1HENR) &= ~ (RCC_APB1HENR_TIM24EN) +#endif /* TIM24 */ + + +/** @brief Get the enable or disable status of the APB1 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM2EN) != 0U) +#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM3EN) != 0U) +#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM4EN) != 0U) +#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM5EN) != 0U) +#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM6EN) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM7EN) != 0U) +#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM12EN) != 0U) +#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM13EN) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM14EN) != 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_LPTIM1EN) != 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_WWDG2EN) != 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI2EN) != 0U) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI3EN) != 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPDIFRXEN) != 0U) +#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART2EN) != 0U) +#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART3EN) != 0U) +#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART4EN) != 0U) +#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART5EN) != 0U) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C1EN) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C2EN) != 0U) +#define __HAL_RCC_I2C3_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C3EN) != 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C5EN) != 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_CECEN) != 0U) +#define __HAL_RCC_DAC12_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_DAC12EN) != 0U) +#define __HAL_RCC_UART7_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART7EN) != 0U) +#define __HAL_RCC_UART8_IS_CLK_ENABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART8EN) != 0U) +#define __HAL_RCC_CRS_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_CRSEN) != 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_SWPMIEN) != 0U) +#define __HAL_RCC_OPAMP_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_OPAMPEN) != 0U) +#define __HAL_RCC_MDIOS_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_MDIOSEN) != 0U) +#define __HAL_RCC_FDCAN_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_FDCANEN) != 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM23EN) != 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_ENABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM24EN) != 0U) +#endif /* TIM24 */ + +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM2EN) == 0U) +#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM3EN) == 0U) +#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM4EN) == 0U) +#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM5EN) == 0U) +#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM6EN) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM7EN) == 0U) +#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM12EN) == 0U) +#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM13EN) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_TIM14EN) == 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_LPTIM1EN) == 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_WWDG2EN) == 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI2EN) == 0U) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPI3EN) == 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_SPDIFRXEN) == 0U) +#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART2EN) == 0U) +#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_USART3EN) == 0U) +#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART4EN) == 0U) +#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART5EN) == 0U) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C1EN) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C2EN) == 0U) +#define __HAL_RCC_I2C3_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C3EN) == 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_I2C5EN) == 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_CECEN) == 0U) +#define __HAL_RCC_DAC12_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_DAC12EN) == 0U) +#define __HAL_RCC_UART7_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART7EN) == 0U) +#define __HAL_RCC_UART8_IS_CLK_DISABLED() ((RCC->APB1LENR & RCC_APB1LENR_UART8EN) == 0U) +#define __HAL_RCC_CRS_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_CRSEN) == 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_SWPMIEN) == 0U) +#define __HAL_RCC_OPAMP_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_OPAMPEN) == 0U) +#define __HAL_RCC_MDIOS_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_MDIOSEN) == 0U) +#define __HAL_RCC_FDCAN_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_FDCANEN) == 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM23EN) == 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_DISABLED() ((RCC->APB1HENR & RCC_APB1HENR_TIM24EN) == 0U) +#endif /* TIM24 */ + + +/** @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_UART9EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*UART9*/ + +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART10EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART10EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*USART10*/ + +#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*SAI2*/ + +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI3EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*SAI3*/ + +#define __HAL_RCC_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN) +#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN) +#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN) +#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN) +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_UART9EN) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_USART10EN) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN) +#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN) +#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN) +#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN) +#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN) +#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN) +#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN) +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN) +#endif /*SAI2*/ +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_DISABLE() (RCC->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN) +#endif /*HRTIM*/ + +/** @brief Get the enable or disable status of the APB2 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM1EN) != 0U) +#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM8EN) != 0U) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART1EN) != 0U) +#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART6EN) != 0U) +#if defined(UART9) +#define __HAL_RCC_UART9_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_UART9EN) != 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART10EN) != 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI1EN) != 0U) +#define __HAL_RCC_SPI4_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI4EN) != 0U) +#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM15EN) != 0U) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM16EN) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM17EN) != 0U) +#define __HAL_RCC_SPI5_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI5EN) != 0U) +#define __HAL_RCC_SAI1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI1EN) != 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI2EN) != 0U) +#endif /*SAI2*/ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI3EN) != 0U) +#endif /* SAI3 */ +#define __HAL_RCC_DFSDM1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_DFSDM1EN) != 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & RCC_APB2ENR_HRTIMEN) != 0U) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM1EN) == 0U) +#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM8EN) == 0U) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART1EN) == 0U) +#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART6EN) == 0U) +#if defined(UART9) +#define __HAL_RCC_UART9_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_UART9EN) == 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_USART10EN) == 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI1EN) == 0U) +#define __HAL_RCC_SPI4_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI4EN) == 0U) +#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM15EN) == 0U) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM16EN) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_TIM17EN) == 0U) +#define __HAL_RCC_SPI5_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SPI5EN) == 0U) +#define __HAL_RCC_SAI1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI1EN) == 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI2EN) == 0U) +#endif /*SAI2*/ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_SAI3EN) == 0U) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_DFSDM1EN) == 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & RCC_APB2ENR_HRTIMEN) == 0U) +#endif /*HRTIM1*/ + +/** @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_I2C4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_I2C4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* LPTIM4 */ + +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* LPTIM5 */ + +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DAC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DAC2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* DAC2 */ + +#define __HAL_RCC_COMP12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_COMP12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_COMP12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_VREFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_SAI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_SAI4EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* SAI4 */ + +#define __HAL_RCC_RTC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DTSEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DTS*/ + +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC->APB4ENR, RCC_APB4ENR_DFSDM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC->APB4ENR, RCC_APB4ENR_DFSDM2EN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN) +#define __HAL_RCC_LPUART1_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN) +#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN) +#define __HAL_RCC_I2C4_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN) +#define __HAL_RCC_LPTIM2_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN) +#define __HAL_RCC_LPTIM3_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_DAC2EN) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN) +#define __HAL_RCC_VREF_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) +#define __HAL_RCC_RTC_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN) +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_DTSEN) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_DISABLE() (RCC->APB4ENR) &= ~ (RCC_APB4ENR_DFSDM2EN) +#endif /*DFSDM2*/ + +/** @brief Get the enable or disable status of the APB4 peripheral clock + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_SYSCFGEN) != 0U) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPUART1EN) != 0U) +#define __HAL_RCC_SPI6_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_SPI6EN) != 0U) +#define __HAL_RCC_I2C4_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_I2C4EN) != 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM2EN) != 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM3EN) != 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM4EN) != 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM5EN) != 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_DAC2EN) != 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_COMP12EN) != 0U) +#define __HAL_RCC_VREF_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_VREFEN) != 0U) +#define __HAL_RCC_RTC_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_RTCAPBEN) != 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_SAI4EN) != 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_DTSEN) != 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_ENABLED() ((RCC->APB4ENR & RCC_APB4ENR_DFSDM2EN) != 0U) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_SYSCFGEN) == 0U) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPUART1EN) == 0U) +#define __HAL_RCC_SPI6_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_SPI6EN) == 0U) +#define __HAL_RCC_I2C4_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_I2C4EN) == 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM2EN) == 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM3EN) == 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM4EN) == 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_LPTIM5EN) == 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_DAC2EN) == 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_COMP12EN) == 0U) +#define __HAL_RCC_VREF_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_VREFEN) == 0U) +#define __HAL_RCC_RTC_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_RTCAPBEN) == 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_SAI4EN) == 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_DTSEN) == 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_DISABLED() ((RCC->APB4ENR & RCC_APB4ENR_DFSDM2EN) == 0U) +#endif /*DFSDM2*/ + +#if defined(DUAL_CORE) + +/* Exported macros for RCC_C1 -------------------------------------------------*/ + +/** @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_MDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_JPGDECEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + UNUSED(tmpreg); \ + } while(0) + + + + +#define __HAL_RCC_C1_MDMA_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN)) +#define __HAL_RCC_C1_DMA2D_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN)) +#define __HAL_RCC_C1_JPGDECEN_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN)) +#define __HAL_RCC_C1_FMC_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN)) +#define __HAL_RCC_C1_QSPI_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN)) +#define __HAL_RCC_C1_SDMMC1_CLK_DISABLE() (RCC_C1->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN)) + + + + +/** @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ART_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DMA1_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_C1_DMA2_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN)) +#define __HAL_RCC_C1_ADC12_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN)) +#define __HAL_RCC_C1_ART_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ARTEN)) +#define __HAL_RCC_C1_ETH1MAC_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN)) +#define __HAL_RCC_C1_ETH1TX_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN)) +#define __HAL_RCC_C1_ETH1RX_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC_C1->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN)) + +/** @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_C1_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_D2SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_D2SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_D2SRAM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DCMI_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN)) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN)) +#endif /* HASH */ +#define __HAL_RCC_C1_RNG_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN)) +#define __HAL_RCC_C1_SDMMC2_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN)) +#define __HAL_RCC_C1_D2SRAM1_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN)) +#define __HAL_RCC_C1_D2SRAM2_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN)) +#define __HAL_RCC_C1_D2SRAM3_CLK_DISABLE() (RCC_C1->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN)) + +/** @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_BDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_GPIOA_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN) +#define __HAL_RCC_C1_GPIOB_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN) +#define __HAL_RCC_C1_GPIOC_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN) +#define __HAL_RCC_C1_GPIOD_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN) +#define __HAL_RCC_C1_GPIOE_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN) +#define __HAL_RCC_C1_GPIOF_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN) +#define __HAL_RCC_C1_GPIOG_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN) +#define __HAL_RCC_C1_GPIOH_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN) +#define __HAL_RCC_C1_GPIOI_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN) +#define __HAL_RCC_C1_GPIOJ_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN) +#define __HAL_RCC_C1_GPIOK_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN) +#define __HAL_RCC_C1_CRC_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_C1_BDMA_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN) +#define __HAL_RCC_C1_ADC3_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN) +#define __HAL_RCC_C1_HSEM_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_C1_BKPRAM_CLK_DISABLE() (RCC_C1->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN) + + +/** @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_WWDG1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LTDC_CLK_DISABLE() (RCC_C1->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN) +#define __HAL_RCC_C1_DSI_CLK_DISABLE() (RCC_C1->APB3ENR) &= ~ (RCC_APB3ENR_DSIEN) +#define __HAL_RCC_C1_WWDG1_CLK_DISABLE() (RCC_C1->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN) + +/** @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_WWDG2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DAC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_DAC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_DAC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1LENR, RCC_APB1LENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SWPMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB1HENR, RCC_APB1HENR_FDCANEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_TIM2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN) +#define __HAL_RCC_C1_TIM3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN) +#define __HAL_RCC_C1_TIM4_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN) +#define __HAL_RCC_C1_TIM5_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN) +#define __HAL_RCC_C1_TIM6_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN) +#define __HAL_RCC_C1_TIM7_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN) +#define __HAL_RCC_C1_TIM12_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN) +#define __HAL_RCC_C1_TIM13_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN) +#define __HAL_RCC_C1_TIM14_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN) +#define __HAL_RCC_C1_LPTIM1_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN) +#define __HAL_RCC_C1_WWDG2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_WWDG2EN) +#define __HAL_RCC_C1_SPI2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN) +#define __HAL_RCC_C1_SPI3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN) +#define __HAL_RCC_C1_SPDIFRX_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN) +#define __HAL_RCC_C1_USART2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN) +#define __HAL_RCC_C1_USART3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN) +#define __HAL_RCC_C1_UART4_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN) +#define __HAL_RCC_C1_UART5_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN) +#define __HAL_RCC_C1_I2C1_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN) +#define __HAL_RCC_C1_I2C2_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN) +#define __HAL_RCC_C1_I2C3_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN) +#define __HAL_RCC_C1_CEC_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_CECEN) +#define __HAL_RCC_C1_DAC12_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN) +#define __HAL_RCC_C1_UART7_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN) +#define __HAL_RCC_C1_UART8_CLK_DISABLE() (RCC_C1->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN) +#define __HAL_RCC_C1_CRS_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN) +#define __HAL_RCC_C1_SWPMI_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN) +#define __HAL_RCC_C1_OPAMP_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN) +#define __HAL_RCC_C1_MDIOS_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN) +#define __HAL_RCC_C1_FDCAN_CLK_DISABLE() (RCC_C1->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN) + +/** @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_SAI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_HRTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_TIM1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN) +#define __HAL_RCC_C1_TIM8_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN) +#define __HAL_RCC_C1_USART1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN) +#define __HAL_RCC_C1_USART6_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN) +#define __HAL_RCC_C1_SPI1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN) +#define __HAL_RCC_C1_SPI4_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN) +#define __HAL_RCC_C1_TIM15_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN) +#define __HAL_RCC_C1_TIM16_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN) +#define __HAL_RCC_C1_TIM17_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN) +#define __HAL_RCC_C1_SPI5_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN) +#define __HAL_RCC_C1_SAI1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN) +#define __HAL_RCC_C1_SAI2_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN) +#define __HAL_RCC_C1_SAI3_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN) +#define __HAL_RCC_C1_DFSDM1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN) +#define __HAL_RCC_C1_HRTIM1_CLK_DISABLE() (RCC_C1->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN) + +/** @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C1_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_I2C4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_I2C4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_COMP12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_COMP12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_COMP12EN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_VREFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_RTC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C1_SAI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SAI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C1->APB4ENR, RCC_APB4ENR_SAI4EN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C1_SYSCFG_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN) +#define __HAL_RCC_C1_LPUART1_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN) +#define __HAL_RCC_C1_SPI6_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN) +#define __HAL_RCC_C1_I2C4_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN) +#define __HAL_RCC_C1_LPTIM2_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN) +#define __HAL_RCC_C1_LPTIM3_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN) +#define __HAL_RCC_C1_LPTIM4_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN) +#define __HAL_RCC_C1_LPTIM5_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN) +#define __HAL_RCC_C1_COMP12_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN) +#define __HAL_RCC_C1_VREF_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) +#define __HAL_RCC_C1_RTC_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN) +#define __HAL_RCC_C1_SAI4_CLK_DISABLE() (RCC_C1->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN) + +/* Exported macros for RCC_C2 -------------------------------------------------*/ + +/** @brief Enable or disable the AHB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + + +#define __HAL_RCC_C2_MDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_MDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DMA2D_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DMA2DEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_JPGDECEN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_JPGDECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_FLASH_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FLASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FLASHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DTCM1_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_DTCM2_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_DTCM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_ITCM_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_ITCMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_ITCMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_D1SRAM1_C2_ALLOCATE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_AXISRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_AXISRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_FMC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_FMCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_QSPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SDMMC1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, RCC_AHB3ENR_SDMMC1EN);\ + UNUSED(tmpreg); \ + } while(0) + + + + +#define __HAL_RCC_C2_MDMA_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_MDMAEN)) +#define __HAL_RCC_C2_DMA2D_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_DMA2DEN)) +#define __HAL_RCC_C2_JPGDECEN_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_JPGDECEN)) +#define __HAL_RCC_C2_FMC_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_FMCEN)) +#define __HAL_RCC_C2_QSPI_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_QSPIEN)) +#define __HAL_RCC_C2_SDMMC1_CLK_DISABLE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_SDMMC1EN)) +#define __HAL_RCC_FLASH_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_FLASHEN)) +#define __HAL_RCC_DTCM1_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_DTCM1EN)) +#define __HAL_RCC_DTCM2_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_DTCM2EN)) +#define __HAL_RCC_ITCM_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_ITCMEN)) +#define __HAL_RCC_D1SRAM1_C2_DEALLOCATE() (RCC_C2->AHB3ENR &= ~ (RCC_AHB3ENR_AXISRAMEN)) + +/** @brief Enable or disable the AHB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_DMA1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DMA2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ADC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ADC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ART_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ARTEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ETH1MAC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1MACEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ETH1TX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1TXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ETH1RX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_ETH1RXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB1OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, RCC_AHB1ENR_USB2OTGHSULPIEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C2_DMA1_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_DMA1EN)) +#define __HAL_RCC_C2_DMA2_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_DMA2EN)) +#define __HAL_RCC_C2_ADC12_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ADC12EN)) +#define __HAL_RCC_C2_ART_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ARTEN)) +#define __HAL_RCC_C2_ETH1MAC_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1MACEN)) +#define __HAL_RCC_C2_ETH1TX_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1TXEN)) +#define __HAL_RCC_C2_ETH1RX_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_ETH1RXEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB1OTGHSULPIEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_DISABLE() (RCC_C2->AHB1ENR &= ~ (RCC_AHB1ENR_USB2OTGHSULPIEN)) + +/** @brief Enable or disable the AHB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_DCMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* CRYP */ + +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_HASHEN);\ + UNUSED(tmpreg); \ + } while(0) +#endif /* HASH */ + +#define __HAL_RCC_C2_RNG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_RNGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SDMMC2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_SDMMC2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_D2SRAM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_D2SRAM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_D2SRAM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, RCC_AHB2ENR_D2SRAM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DCMI_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_DCMIEN)) +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_CRYPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_HASHEN)) +#endif /* HASH */ +#define __HAL_RCC_C2_RNG_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_RNGEN)) +#define __HAL_RCC_C2_SDMMC2_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_SDMMC2EN)) +#define __HAL_RCC_C2_D2SRAM1_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM1EN)) +#define __HAL_RCC_C2_D2SRAM2_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM2EN)) +#define __HAL_RCC_C2_D2SRAM3_CLK_DISABLE() (RCC_C2->AHB2ENR &= ~ (RCC_AHB2ENR_D2SRAM3EN)) + +/** @brief Enable or disable the AHB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_GPIOA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOB_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOD_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIODEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOE_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOEEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOH_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOHEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOJ_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOJEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_GPIOK_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_GPIOKEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_CRC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_CRCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_BDMA_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BDMAEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_ADC3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_ADC3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_HSEM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_HSEMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_BKPRAM_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, RCC_AHB4ENR_BKPRAMEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C2_GPIOA_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOAEN) +#define __HAL_RCC_C2_GPIOB_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOBEN) +#define __HAL_RCC_C2_GPIOC_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOCEN) +#define __HAL_RCC_C2_GPIOD_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIODEN) +#define __HAL_RCC_C2_GPIOE_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOEEN) +#define __HAL_RCC_C2_GPIOF_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOFEN) +#define __HAL_RCC_C2_GPIOG_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOGEN) +#define __HAL_RCC_C2_GPIOH_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOHEN) +#define __HAL_RCC_C2_GPIOI_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOIEN) +#define __HAL_RCC_C2_GPIOJ_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOJEN) +#define __HAL_RCC_C2_GPIOK_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_GPIOKEN) +#define __HAL_RCC_C2_CRC_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_CRCEN) +#define __HAL_RCC_C2_BDMA_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_BDMAEN) +#define __HAL_RCC_C2_ADC3_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_ADC3EN) +#define __HAL_RCC_C2_HSEM_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_HSEMEN) +#define __HAL_RCC_C2_BKPRAM_CLK_DISABLE() (RCC_C2->AHB4ENR) &= ~ (RCC_AHB4ENR_BKPRAMEN) + + +/** @brief Enable or disable the APB3 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_LTDC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_LTDCEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_LTDCEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DSI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_DSIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_DSIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_WWDG1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB3ENR, RCC_APB3ENR_WWDG1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LTDC_CLK_DISABLE() (RCC_C2->APB3ENR) &= ~ (RCC_APB3ENR_LTDCEN) +#define __HAL_RCC_C2_DSI_CLK_DISABLE() (RCC_C2->APB3ENR) &= ~ (RCC_APB3ENR_DSIEN) +#define __HAL_RCC_C2_WWDG1_CLK_DISABLE() (RCC_C2->APB3ENR) &= ~ (RCC_APB3ENR_WWDG1EN) + +/** @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_TIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM13_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM13EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM13EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM14_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM14EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_TIM14EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_LPTIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_WWDG2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_WWDG2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPDIFRX_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_SPDIFRXEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_USART3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_I2C3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_CEC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_CECEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_CECEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DAC12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_DAC12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_DAC12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART7_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART7EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART7EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_UART8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1LENR, RCC_APB1LENR_UART8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_CRS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_CRSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_CRSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SWPMI_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_SWPMIEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_OPAMP_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_OPAMPEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_MDIOS_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_MDIOSEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_FDCAN_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_FDCANEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB1HENR, RCC_APB1HENR_FDCANEN);\ + UNUSED(tmpreg); \ + } while(0) + + +#define __HAL_RCC_C2_TIM2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM2EN) +#define __HAL_RCC_C2_TIM3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM3EN) +#define __HAL_RCC_C2_TIM4_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM4EN) +#define __HAL_RCC_C2_TIM5_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM5EN) +#define __HAL_RCC_C2_TIM6_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM6EN) +#define __HAL_RCC_C2_TIM7_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM7EN) +#define __HAL_RCC_C2_TIM12_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM12EN) +#define __HAL_RCC_C2_TIM13_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM13EN) +#define __HAL_RCC_C2_TIM14_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_TIM14EN) +#define __HAL_RCC_C2_LPTIM1_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_LPTIM1EN) +#define __HAL_RCC_C2_WWDG2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_WWDG2EN) +#define __HAL_RCC_C2_SPI2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_SPI2EN) +#define __HAL_RCC_C2_SPI3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_SPI3EN) +#define __HAL_RCC_C2_SPDIFRX_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_SPDIFRXEN) +#define __HAL_RCC_C2_USART2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_USART2EN) +#define __HAL_RCC_C2_USART3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_USART3EN) +#define __HAL_RCC_C2_UART4_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART4EN) +#define __HAL_RCC_C2_UART5_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART5EN) +#define __HAL_RCC_C2_I2C1_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_I2C1EN) +#define __HAL_RCC_C2_I2C2_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_I2C2EN) +#define __HAL_RCC_C2_I2C3_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_I2C3EN) +#define __HAL_RCC_C2_CEC_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_CECEN) +#define __HAL_RCC_C2_DAC12_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_DAC12EN) +#define __HAL_RCC_C2_UART7_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART7EN) +#define __HAL_RCC_C2_UART8_CLK_DISABLE() (RCC_C2->APB1LENR) &= ~ (RCC_APB1LENR_UART8EN) +#define __HAL_RCC_C2_CRS_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_CRSEN) +#define __HAL_RCC_C2_SWPMI_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_SWPMIEN) +#define __HAL_RCC_C2_OPAMP_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_OPAMPEN) +#define __HAL_RCC_C2_MDIOS_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_MDIOSEN) +#define __HAL_RCC_C2_FDCAN_CLK_DISABLE() (RCC_C2->APB1HENR) &= ~ (RCC_APB1HENR_FDCANEN) + +/** @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_TIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM8_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM8EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM8EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_USART6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_USART6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM15_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM15EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM15EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM16_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM16EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM16EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM17_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM17EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_TIM17EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SPI5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_SAI3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_DFSDM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_DFSDM1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_HRTIM1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB2ENR, RCC_APB2ENR_HRTIMEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_TIM1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM1EN) +#define __HAL_RCC_C2_TIM8_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM8EN) +#define __HAL_RCC_C2_USART1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_USART1EN) +#define __HAL_RCC_C2_USART6_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_USART6EN) +#define __HAL_RCC_C2_SPI1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SPI1EN) +#define __HAL_RCC_C2_SPI4_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SPI4EN) +#define __HAL_RCC_C2_TIM15_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM15EN) +#define __HAL_RCC_C2_TIM16_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM16EN) +#define __HAL_RCC_C2_TIM17_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_TIM17EN) +#define __HAL_RCC_C2_SPI5_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SPI5EN) +#define __HAL_RCC_C2_SAI1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SAI1EN) +#define __HAL_RCC_C2_SAI2_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SAI2EN) +#define __HAL_RCC_C2_SAI3_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_SAI3EN) +#define __HAL_RCC_C2_DFSDM1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_DFSDM1EN) +#define __HAL_RCC_C2_HRTIM1_CLK_DISABLE() (RCC_C2->APB2ENR) &= ~ (RCC_APB2ENR_HRTIMEN) + +/** @brief Enable or disable the APB4 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + */ + +#define __HAL_RCC_C2_SYSCFG_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SYSCFGEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPUART1_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPUART1EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SPI6_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SPI6EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SPI6EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_I2C4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_I2C4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_I2C4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM2_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM2EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM3_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM3EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM4EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_LPTIM5_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_LPTIM5EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_COMP12_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_COMP12EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_COMP12EN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_VREF_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_VREFEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_VREFEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_RTC_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_RTCAPBEN);\ + UNUSED(tmpreg); \ + } while(0) + +#define __HAL_RCC_C2_SAI4_CLK_ENABLE() do { \ + __IO uint32_t tmpreg; \ + SET_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SAI4EN);\ + /* Delay after an RCC peripheral clock enabling */ \ + tmpreg = READ_BIT(RCC_C2->APB4ENR, RCC_APB4ENR_SAI4EN);\ + UNUSED(tmpreg); \ + } while(0) + + + +#define __HAL_RCC_C2_SYSCFG_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_SYSCFGEN) +#define __HAL_RCC_C2_LPUART1_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPUART1EN) +#define __HAL_RCC_C2_SPI6_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_SPI6EN) +#define __HAL_RCC_C2_I2C4_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_I2C4EN) +#define __HAL_RCC_C2_LPTIM2_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM2EN) +#define __HAL_RCC_C2_LPTIM3_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM3EN) +#define __HAL_RCC_C2_LPTIM4_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM4EN) +#define __HAL_RCC_C2_LPTIM5_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_LPTIM5EN) +#define __HAL_RCC_C2_COMP12_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_COMP12EN) +#define __HAL_RCC_C2_VREF_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_VREFEN) +#define __HAL_RCC_C2_RTC_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_RTCAPBEN) +#define __HAL_RCC_C2_SAI4_CLK_DISABLE() (RCC_C2->APB4ENR) &= ~ (RCC_APB4ENR_SAI4EN) + +#endif /*DUAL_CORE*/ + +/** @brief Enable or disable the AHB3 peripheral reset. + */ + +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0x00015031U) /* Resets MDMA, DMA2D, JPEG, FMC, QSPI and SDMMC1 */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0x01E95031U) /* Resets MDMA, DMA2D, JPEG, FMC, OSPI1, SDMMC1, OSPI2, IOMNGR, OTFD1, OTFD2 and GFXMMU */ +#else +#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0x00E95011U) /* Resets MDMA, DMA2D, FMC, OSPI1, SDMMC1, OSPI2, IOMNGR, OTFD1, OTFD2 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_MDMA_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_MDMARST)) +#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_DMA2DRST)) +#if defined(JPEG) +#define __HAL_RCC_JPGDECRST_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_JPGDECRST)) +#endif /* JPEG */ +#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) +#endif /*QUADSPI*/ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OSPI1RST)) +#endif /*OCTOSPI1*/ +#define __HAL_RCC_SDMMC1_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_SDMMC1RST)) +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OSPI2RST)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_IOMNGRRST)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OTFDEC1RST)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_OTFDEC2RST)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_GFXMMURST)) +#endif /*GFXMMU*/ + +#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00) +#define __HAL_RCC_MDMA_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_MDMARST)) +#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_DMA2DRST)) +#if defined(JPEG) +#define __HAL_RCC_JPGDECRST_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_JPGDECRST)) +#endif /* JPEG */ +#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_FMCRST)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_QSPIRST)) +#endif /*QUADSPI*/ +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OSPI1RST)) +#endif /*OCTOSPI1*/ +#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_SDMMC1RST)) +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OSPI2RST)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_IOMNGRRST)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OTFDEC1RST)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_OTFDEC2RST)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_RELEASE_RESET() (RCC->AHB3RSTR &= ~ (RCC_AHB3RSTR_GFXMMURST)) +#endif /*GFXMMU*/ + + + +/** @brief Force or release the AHB1 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0x0A00C023U) /* Resets DMA1, DMA2, ADC12, ART, ETHMAC, USB1OTG and USB2OTG */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0x02000223U) /* Resets DMA1, DMA2, ADC12, CRC and USB1OTG */ +#else +#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0x02008023U) /* Resets DMA1, DMA2, ADC12, ETHMAC and USB1OTG */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) +#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) +#define __HAL_RCC_ADC12_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ADC12RST)) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ARTRST)) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1RSTR_CRCRST) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETH1MACRST)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_USB1OTGHSRST)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_USB2OTGHSRST)) +#endif /*USB2_OTG_FS*/ + +#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U) +#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_DMA1RST)) +#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_DMA2RST)) +#define __HAL_RCC_ADC12_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ADC12RST)) +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ARTRST)) +#endif /*DUAL_CORE*/ +#if defined(RCC_AHB1RSTR_CRCRST) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_CRCRST)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_ETH1MACRST)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_USB1OTGHSRST)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() (RCC->AHB1RSTR &= ~ (RCC_AHB1RSTR_USB2OTGHSRST)) +#endif /*USB2_OTG_FS*/ + +/** @brief Force or release the AHB2 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0x00000271U) /* Resets DCMI, CRYPT, HASH, RNG and SDMMC2 */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0x00000A75U) /* Resets DCMI_PSSI, HSEM, CRYPT, HASH, RNG, SDMMC2 and BDMA1 */ +#else +#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0x00030271U) /* Resets DCMI_PSSI, CRYPT, HASH, RNG, SDMMC2, FMAC and CORDIC */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMI_PSSIRST)) +#define __HAL_RCC_DCMI_FORCE_RESET() __HAL_RCC_DCMI_PSSI_FORCE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) +#endif /* HASH */ +#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_SDMMC2_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_SDMMC2RST)) +#if defined(FMAC) +#define __HAL_RCC_FMAC_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_FMACRST)) +#endif /*FMAC*/ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CORDICRST)) +#endif /*CORDIC*/ +#if defined(RCC_AHB2RSTR_HSEMRST) +#define __HAL_RCC_HSEM_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HSEMRST)) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_BDMA1RST)) +#endif /*BDMA1*/ + +#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00U) +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_DCMI_PSSIRST)) +#define __HAL_RCC_DCMI_RELEASE_RESET() __HAL_RCC_DCMI_PSSI_RELEASE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_DCMIRST)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_CRYPRST)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_HASHRST)) +#endif /* HASH */ +#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_RNGRST)) +#define __HAL_RCC_SDMMC2_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_SDMMC2RST)) +#if defined(FMAC) +#define __HAL_RCC_FMAC_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_FMACRST)) +#endif /*FMAC*/ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_CORDICRST)) +#endif /*CORDIC*/ +#if defined(RCC_AHB2RSTR_HSEMRST) +#define __HAL_RCC_HSEM_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_HSEMRST)) +#endif +#if defined(BDMA1) +#define __HAL_RCC_BDMA1_RELEASE_RESET() (RCC->AHB2RSTR &= ~ (RCC_AHB2RSTR_BDMA1RST)) +#endif /*BDMA1*/ + + +/** @brief Force or release the AHB4 peripheral reset. + */ + +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_AHB4_FORCE_RESET() (RCC->AHB4RSTR = 0x032807FFU) /* Resets GPIOA..GPIOK, CRC, BDMA, ADC3 and HSEM */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_AHB4_FORCE_RESET() (RCC->AHB4RSTR = 0x002007FFU) /* Resets GPIOA..GPIOK and BDMA2 */ +#else +#define __HAL_RCC_AHB4_FORCE_RESET() (RCC->AHB4RSTR = 0x032806FFU) /* Resets GPIOA..GPIOH, GPIOJ, GPIOK, CRC, BDMA, ADC3 and HSEM */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOARST) +#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIODRST) +#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOERST) +#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOFRST) +#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOGRST) +#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOHRST) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOIRST) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOJRST) +#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_GPIOKRST) +#if defined(RCC_AHB4RSTR_CRCRST) +#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_CRCRST) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_BDMA2RST) +#define __HAL_RCC_BDMA_FORCE_RESET() __HAL_RCC_BDMA2_FORCE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_BDMARST) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_ADC3RST) +#endif /*ADC3*/ +#if defined(RCC_AHB4RSTR_HSEMRST) +#define __HAL_RCC_HSEM_FORCE_RESET() (RCC->AHB4RSTR) |= (RCC_AHB4RSTR_HSEMRST) +#endif + +#define __HAL_RCC_AHB4_RELEASE_RESET() (RCC->AHB4RSTR = 0x00U) +#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOARST) +#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOBRST) +#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOCRST) +#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIODRST) +#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOERST) +#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOFRST) +#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOGRST) +#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOHRST) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOIRST) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOJRST) +#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_GPIOKRST) +#if defined(RCC_AHB4RSTR_CRCRST) +#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_CRCRST) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_BDMA2RST) +#define __HAL_RCC_BDMA_RELEASE_RESET() __HAL_RCC_BDMA2_RELEASE_RESET() /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_BDMARST) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_ADC3RST) +#endif /*ADC3*/ +#if defined(RCC_AHB4RSTR_HSEMRST) +#define __HAL_RCC_HSEM_RELEASE_RESET() (RCC->AHB4RSTR) &= ~ (RCC_AHB4RSTR_HSEMRST) +#endif + +/** @brief Force or release the APB3 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_APB3_FORCE_RESET() (RCC->APB3RSTR = 0x00000018U) /* Rests LTDC and DSI */ +#else +#define __HAL_RCC_APB3_FORCE_RESET() (RCC->APB3RSTR = 0x00000008U) /* Rests LTDC */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#if defined(LTDC) +#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB3RSTR) |= (RCC_APB3RSTR_LTDCRST) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_FORCE_RESET() (RCC->APB3RSTR) |= (RCC_APB3RSTR_DSIRST) +#endif /*DSI*/ + +#define __HAL_RCC_APB3_RELEASE_RESET() (RCC->APB3RSTR = 0x00U) +#if defined(LTDC) +#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB3RSTR) &= ~ (RCC_APB3RSTR_LTDCRST) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_RELEASE_RESET() (RCC->APB3RSTR) &= ~ (RCC_APB3RSTR_DSIRST) +#endif /*DSI*/ + +/** @brief Force or release the APB1 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) || (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB1L_FORCE_RESET() (RCC->APB1LRSTR = 0xE8FFC3FFU) /* Resets TIM2..TIM7, TIM12..TIM14, LPTIM1, SPI2, SPI3, SPDIFRX, USART2, USART3, UART4, UART5, I2C1..I2C3, CEC, DAC1(2), UART7 and UART8 */ +#else +#define __HAL_RCC_APB1L_FORCE_RESET() (RCC->APB1LRSTR = 0xEAFFC3FFU) /* Resets TIM2..TIM7, TIM12..TIM14, LPTIM1, SPI2, SPI3, SPDIFRX, USART2, USART3, UART4, UART5, I2C1..I2C3, I2C5, CEC, DAC12, UART7 and UART8 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#if (STM32H7_DEV_ID == 0x450UL) || (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB1H_FORCE_RESET() (RCC->APB1HRSTR = 0x00000136U) /* Resets CRS, SWP, OPAMP, MDIOS and FDCAN */ +#else +#define __HAL_RCC_APB1H_FORCE_RESET() (RCC->APB1HRSTR = 0x03000136U) /* Resets CRS, SWP, OPAMP, MDIOS, FDCAN, TIM23 and TIM24 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM2RST) +#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM3RST) +#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM4RST) +#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM5RST) +#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM6RST) +#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM7RST) +#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM12RST) +#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM13RST) +#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_TIM14RST) +#define __HAL_RCC_LPTIM1_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_LPTIM1RST) +#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPI2RST) +#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPI3RST) +#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_SPDIFRXRST) +#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_USART2RST) +#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_USART3RST) +#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART4RST) +#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART5RST) +#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C1RST) +#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C2RST) +#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C3RST) +#if defined(I2C5) +#define __HAL_RCC_I2C5_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_I2C5RST) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_CECRST) +#define __HAL_RCC_DAC12_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_DAC12RST) +#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART7RST) +#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1LRSTR) |= (RCC_APB1LRSTR_UART8RST) +#define __HAL_RCC_CRS_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_CRSRST) +#define __HAL_RCC_SWPMI1_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_SWPMIRST) +#define __HAL_RCC_OPAMP_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_OPAMPRST) +#define __HAL_RCC_MDIOS_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_MDIOSRST) +#define __HAL_RCC_FDCAN_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_FDCANRST) +#if defined(TIM23) +#define __HAL_RCC_TIM23_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_TIM23RST) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_FORCE_RESET() (RCC->APB1HRSTR) |= (RCC_APB1HRSTR_TIM24RST) +#endif /* TIM24 */ + +#define __HAL_RCC_APB1L_RELEASE_RESET() (RCC->APB1LRSTR = 0x00U) +#define __HAL_RCC_APB1H_RELEASE_RESET() (RCC->APB1HRSTR = 0x00U) +#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM2RST) +#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM3RST) +#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM4RST) +#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM5RST) +#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM6RST) +#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM7RST) +#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM12RST) +#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM13RST) +#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_TIM14RST) +#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_LPTIM1RST) +#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPI2RST) +#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPI3RST) +#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_SPDIFRXRST) +#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_USART2RST) +#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_USART3RST) +#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART4RST) +#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART5RST) +#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C1RST) +#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C2RST) +#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C3RST) +#if defined(I2C5) +#define __HAL_RCC_I2C5_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_I2C5RST) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_CECRST) +#define __HAL_RCC_DAC12_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_DAC12RST) +#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART7RST) +#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1LRSTR) &= ~ (RCC_APB1LRSTR_UART8RST) +#define __HAL_RCC_CRS_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_CRSRST) +#define __HAL_RCC_SWPMI1_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_SWPMIRST) +#define __HAL_RCC_OPAMP_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_OPAMPRST) +#define __HAL_RCC_MDIOS_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_MDIOSRST) +#define __HAL_RCC_FDCAN_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_FDCANRST) +#if defined(TIM23) +#define __HAL_RCC_TIM23_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_TIM23RST) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_RELEASE_RESET() (RCC->APB1HRSTR) &= ~ (RCC_APB1HRSTR_TIM24RST) +#endif /* TIM24 */ + +/** @brief Force or release the APB2 peripheral reset. + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0x31D73033U) /* Resets TIM1, TIM8, USART1, USART6, SPI1, SPI4, TIM15..TIM17, SPI5, SAI1..SAI3, DFSDM1 and HRTIM */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0x40D730F3U) /* Resets TIM1, TIM8, USART1, USART6, UART9, USART10, SPI1, SPI4, TIM15..TIM17, SPI5, SAI1, SAI2 and DFSDM1 */ +#else +#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0x405730F3U) /* Resets TIM1, TIM8, USART1, USART6, UART9, USART10, SPI1, SPI4, TIM15..TIM17, SPI5, SAI1 and DFSDM1 */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM1RST) +#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM8RST) +#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART1RST) +#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART6RST) +#if defined(UART9) +#define __HAL_RCC_UART9_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_UART9RST) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_USART10RST) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI1RST) +#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI4RST) +#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM15RST) +#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM16RST) +#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_TIM17RST) +#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SPI5RST) +#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI1RST) +#if defined(SAI2) +#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_SAI3RST) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_DFSDM1RST) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_FORCE_RESET() (RCC->APB2RSTR) |= (RCC_APB2RSTR_HRTIMRST) +#endif /*HRTIM1*/ + +#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U) +#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM1RST) +#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM8RST) +#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART1RST) +#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART6RST) +#if defined(UART9) +#define __HAL_RCC_UART9_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_UART9RST) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_USART10RST) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI1RST) +#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI4RST) +#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM15RST) +#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM16RST) +#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_TIM17RST) +#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SPI5RST) +#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI1RST) +#if defined(SAI2) +#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI2RST) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_SAI3RST) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_DFSDM1RST) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_RELEASE_RESET() (RCC->APB2RSTR) &= ~ (RCC_APB2RSTR_HRTIMRST) +#endif /*HRTIM1*/ + +/** @brief Force or release the APB4 peripheral reset. + */ + +#if (STM32H7_DEV_ID == 0x450UL) +#define __HAL_RCC_APB4_FORCE_RESET() (RCC->APB4RSTR = 0x0020DEAAU) /* Resets SYSCFG, LPUART1, SPI6, I2C4, LPTIM2..LPTIM5, COMP12, VREF and SAI4 */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define __HAL_RCC_APB4_FORCE_RESET() (RCC->APB4RSTR = 0x0C00E6AAU) /* Resets SYSCFG, LPUART1, SPI6, I2C4, LPTIM2, LPTIM3, DAC2, COMP12, VREF, DTS and DFSDM2 */ +#else +#define __HAL_RCC_APB4_FORCE_RESET() (RCC->APB4RSTR = 0x0420DEAAU) /* Resets SYSCFG, LPUART1, SPI6, I2C4, LPTIM2..LPTIM5, COMP12, VREF, SAI4 and DTS */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_SYSCFGRST) +#define __HAL_RCC_LPUART1_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPUART1RST) +#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_SPI6RST) +#define __HAL_RCC_I2C4_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_I2C4RST) +#define __HAL_RCC_LPTIM2_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM2RST) +#define __HAL_RCC_LPTIM3_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM3RST) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM4RST) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_LPTIM5RST) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_DAC2RST) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_COMP12RST) +#define __HAL_RCC_VREF_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_VREFRST) +#if defined(SAI4) +#define __HAL_RCC_SAI4_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_SAI4RST) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_DTSRST) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_FORCE_RESET() (RCC->APB4RSTR) |= (RCC_APB4RSTR_DFSDM2RST) +#endif /*DFSDM2*/ + +#define __HAL_RCC_APB4_RELEASE_RESET() (RCC->APB4RSTR = 0x00U) +#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SYSCFGRST) +#define __HAL_RCC_LPUART1_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPUART1RST) +#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SPI6RST) +#define __HAL_RCC_I2C4_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_I2C4RST) +#define __HAL_RCC_LPTIM2_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM2RST) +#define __HAL_RCC_LPTIM3_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM3RST) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM4RST) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_LPTIM5RST) +#endif /*LPTIM5*/ +#if defined(RCC_APB4RSTR_DAC2RST) +#define __HAL_RCC_DAC2_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_DAC2RST) +#endif +#define __HAL_RCC_COMP12_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_COMP12RST) +#define __HAL_RCC_VREF_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_VREFRST) +#if defined(SAI4) +#define __HAL_RCC_SAI4_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_SAI4RST) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_DTSRST) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_RELEASE_RESET() (RCC->APB4RSTR) &= ~ (RCC_APB4RSTR_DFSDM2RST) +#endif /*DFSDM2*/ + +/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + + +#define __HAL_RCC_MDMA_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN)) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN)) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN)) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OSPI1LPEN)) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OSPI2LPEN)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_IOMNGRLPEN)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OTFDEC1LPEN)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_OTFDEC2LPEN)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_GFXMMULPEN)) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAM2LPEN)) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAM3LPEN)) +#endif +#define __HAL_RCC_DTCM1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_DTCM2_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_ITCM_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN)) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN)) +#define __HAL_RCC_AXISRAM_CLK_SLEEP_ENABLE __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE +#else +#define __HAL_RCC_AXISRAM1_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAM1LPEN)) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_AXISRAM1_CLK_SLEEP_ENABLE /* For backward compatibility */ +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ + +#define __HAL_RCC_MDMA_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN)) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN)) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN)) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN)) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN)) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OSPI1LPEN)) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OSPI2LPEN)) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_IOMNGRLPEN)) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OTFDEC1LPEN)) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_OTFDEC2LPEN)) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_GFXMMULPEN)) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAM2LPEN)) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAM3LPEN)) +#endif +#define __HAL_RCC_DTCM1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_DTCM2_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_ITCM_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN)) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN)) +#define __HAL_RCC_AXISRAM_CLK_SLEEP_DISABLE __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE +#else +#define __HAL_RCC_AXISRAM1_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAM1LPEN)) +#define __HAL_RCC_D1SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_AXISRAM1_CLK_SLEEP_DISABLE /* For backward compatibility */ +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ + +/** @brief Get the enable or disable status of the AHB3 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_MDMA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_MDMALPEN) != 0U) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DMA2DLPEN) != 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_JPGDECLPEN) != 0U) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FLASHLPEN) != 0U) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FMCLPEN) != 0U) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_QSPILPEN) != 0U) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_SDMMC1LPEN) != 0U) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI1LPEN) != 0U) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI2LPEN) != 0U) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_IOMNGRLPEN) != 0U) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC1LPEN) != 0U) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC2LPEN) != 0U) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_GFXMMULPEN) != 0U) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM2LPEN) != 0U) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM3LPEN) != 0U) +#endif +#define __HAL_RCC_DTCM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM1LPEN) != 0U) +#define __HAL_RCC_DTCM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM2LPEN) != 0U) +#define __HAL_RCC_ITCM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_ITCMLPEN) != 0U) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAMLPEN) != 0U) +#else +#define __HAL_RCC_AXISRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM1LPEN) != 0U) +#endif + +#define __HAL_RCC_MDMA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_MDMALPEN) == 0U) +#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DMA2DLPEN) == 0U) +#if defined(JPEG) +#define __HAL_RCC_JPGDEC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_JPGDECLPEN) == 0U) +#endif /* JPEG */ +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FLASHLPEN) == 0U) +#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_FMCLPEN) == 0U) +#if defined(QUADSPI) +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_QSPILPEN) == 0U) +#endif /*QUADSPI*/ +#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_SDMMC1LPEN) == 0U) +#if defined(OCTOSPI1) +#define __HAL_RCC_OSPI1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI1LPEN) == 0U) +#endif /*OCTOSPI1*/ +#if defined(OCTOSPI2) +#define __HAL_RCC_OSPI2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OSPI2LPEN) == 0U) +#endif /*OCTOSPI2*/ +#if defined(OCTOSPIM) +#define __HAL_RCC_IOMNGR_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_IOMNGRLPEN) == 0U) +#endif /*OCTOSPIM*/ +#if defined(OTFDEC1) +#define __HAL_RCC_OTFDEC1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC1LPEN) == 0U) +#endif /*OTFDEC1*/ +#if defined(OTFDEC2) +#define __HAL_RCC_OTFDEC2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_OTFDEC2LPEN) == 0U) +#endif /*OTFDEC2*/ +#if defined(GFXMMU) +#define __HAL_RCC_GFXMMU_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_GFXMMULPEN) == 0U) +#endif /*GFXMMU*/ +#if defined(CD_AXISRAM2_BASE) +#define __HAL_RCC_AXISRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM2LPEN) == 0U) +#endif +#if defined(CD_AXISRAM3_BASE) +#define __HAL_RCC_AXISRAM3_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAM3LPEN) == 0U) +#endif +#define __HAL_RCC_DTCM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM1LPEN) == 0U) +#define __HAL_RCC_DTCM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_DTCM2LPEN) == 0U) +#define __HAL_RCC_ITCM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_ITCMLPEN) == 0U) +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define __HAL_RCC_D1SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAMLPEN) == 0U) +#else +#define __HAL_RCC_AXISRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & RCC_AHB3LPENR_AXISRAML1PEN) == 0U) +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ + +/** @brief ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_ADC12_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN)) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN)) +#endif /*ETH*/ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ARTLPEN)) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_ETH1RX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) +#endif /* USB2_OTG_FS */ + +#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_ADC12_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN)) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_CRCLPEN)) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN)) +#endif /*ETH*/ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ARTLPEN)) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_ETH1RX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN)) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) +#endif /* USB2_OTG_FS */ + +/** @brief Get the enable or disable status of the AHB1 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) != 0U) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != 0U) +#define __HAL_RCC_ADC12_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ADC12LPEN)) != 0U) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) != 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1MACLPEN)) != 0U) +#endif /*ETH*/ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ARTLPEN)) != 0U) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1TXLPEN)) != 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1RXLPEN)) != 0U) +#endif /*ETH*/ +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSLPEN)) != 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) != 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSLPEN)) != 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) != 0U) +#endif /* USB2_OTG_FS */ + +#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) == 0U) +#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == 0U) +#define __HAL_RCC_ADC12_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ADC12LPEN)) == 0U) +#if defined(RCC_AHB1LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) == 0U) +#endif +#if defined(ETH) +#define __HAL_RCC_ETH1MAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1MACLPEN)) == 0U) +#endif /* ETH */ +#if defined(DUAL_CORE) +#define __HAL_RCC_ART_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ARTLPEN)) == 0U) +#endif /*DUAL_CORE*/ +#if defined(ETH) +#define __HAL_RCC_ETH1TX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1TXLPEN)) == 0U) +#define __HAL_RCC_ETH1RX_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETH1RXLPEN)) == 0U) +#endif /* ETH */ +#define __HAL_RCC_USB1_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSLPEN)) == 0U) +#define __HAL_RCC_USB1_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) == 0U) +#if defined(USB2_OTG_FS) +#define __HAL_RCC_USB2_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSLPEN)) == 0U) +#define __HAL_RCC_USB2_OTG_FS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) == 0U) +#endif /* USB2_OTG_FS */ + + +/** @brief ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMI_PSSILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() __HAL_RCC_DCMI_PSSI_CLK_SLEEP_ENABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN)) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DFSDMDMALPEN)) +#endif +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_FMACLPEN)) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CORDICLPEN)) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN)) +#else +#define __HAL_RCC_AHBSRAM1_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AHBSRAM1LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN)) +#else +#define __HAL_RCC_AHBSRAM2_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_AHBSRAM2LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN)) +#endif + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMI_PSSILPEN)) +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() __HAL_RCC_DCMI_PSSI_CLK_SLEEP_DISABLE() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN)) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_SDMMC2_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN)) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_DFSDMDMALPEN)) +#endif +#if defined(FMAC) +#define __HAL_RCC_FMAC_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_FMACLPEN)) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_CORDICLPEN)) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN)) +#else +#define __HAL_RCC_AHBSRAM1_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_AHBSRAM1LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN)) +#else +#define __HAL_RCC_AHBSRAM2_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_AHBSRAM2LPEN)) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN)) +#endif + +/** @brief Get the enable or disable status of the AHB2 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMI_PSSILPEN)) != 0U) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_ENABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != 0U) +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_SDMMC2LPEN)) != 0U) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DFSDMDMALPEN)) != 0U) +#endif +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_FMACLPEN)) != 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CORDICLPEN)) != 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM1LPEN)) != 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM1LPEN)) != 0U) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM2LPEN)) != 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM2LPEN)) != 0U) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_IS_CLK_SLEEP_ENABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM3LPEN)) != 0U) +#endif /* RCC_AHB2LPENR_D2SRAM3LPEN */ + +#if defined(DCMI) && defined(PSSI) +#define __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMI_PSSILPEN)) == 0U) +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() __HAL_RCC_DCMI_PSSI_IS_CLK_SLEEP_DISABLED() /* for API backward compatibility*/ +#else +#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == 0U) +#endif /* DCMI && PSSI */ +#if defined(CRYP) +#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == 0U) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == 0U) +#endif /* HASH */ +#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == 0U) +#if defined(RCC_AHB2LPENR_DFSDMDMALPEN) +#define __HAL_RCC_DFSDMDMA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DFSDMDMALPEN)) == 0U) +#endif +#define __HAL_RCC_SDMMC2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_SDMMC2LPEN)) == 0U) +#if defined(FMAC) +#define __HAL_RCC_FMAC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_FMACLPEN)) == 0U) +#endif /* FMAC */ +#if defined(CORDIC) +#define __HAL_RCC_CORDIC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CORDICLPEN)) == 0U) +#endif /* CORDIC */ +#if defined(RCC_AHB2LPENR_D2SRAM1LPEN) +#define __HAL_RCC_D2SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM1LPEN)) == 0U) +#else +#define __HAL_RCC_AHBSRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM1LPEN)) == 0U) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM2LPEN) +#define __HAL_RCC_D2SRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM2LPEN)) == 0U) +#else +#define __HAL_RCC_AHBSRAM2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_AHBSRAM2LPEN)) == 0U) +#endif /* RCC_AHB2LPENR_D2SRAM2LPEN */ +#if defined(RCC_AHB2LPENR_D2SRAM3LPEN) +#define __HAL_RCC_D2SRAM3_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_D2SRAM3LPEN)) == 0U) +#endif /* RCC_AHB2LPENR_D2SRAM1LPEN*/ + + +/** @brief ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BDMA2LPEN) +#define __HAL_RCC_BDMA_CLK_SLEEP_ENABLE __HAL_RCC_BDMA2_CLK_SLEEP_ENABLE /* for API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN) +#endif /* BDMA2 */ +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN) +#endif /* ADC3 */ +#define __HAL_RCC_BKPRAM_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR |= (RCC_AHB4LPENR_SRDSRAMLPEN)) +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRDSRAM_CLK_SLEEP_ENABLE /* for API backward compatibility*/ +#else +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB4LPENR |= (RCC_AHB4LPENR_D3SRAM1LPEN)) +#endif /* RCC_AHB4LPENR_SRDSRAMLPEN */ + +#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMA2LPEN) +#define __HAL_RCC_BDMA_CLK_SLEEP_DISABLE __HAL_RCC_BDMA2_CLK_SLEEP_DISABLE /* For API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN) +#endif /*ADC3*/ +#define __HAL_RCC_BKPRAM_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR &= ~ (RCC_AHB4LPENR_SRDSRAMLPEN)) +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRDSRAM_CLK_SLEEP_DISABLE +#else +#define __HAL_RCC_D3SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB4LPENR &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN)) +#endif + + +/** @brief Get the enable or disable status of the AHB4 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOALPEN)) != 0U) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOBLPEN)) != 0U) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOCLPEN)) != 0U) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIODLPEN)) != 0U) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOELPEN)) != 0U) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOFLPEN)) != 0U) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOGLPEN)) != 0U) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOHLPEN)) != 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOILPEN)) != 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOJLPEN)) != 0U) +#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOKLPEN)) != 0U) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_CRCLPEN)) != 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMA2LPEN)) != 0U) +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_ENABLED __HAL_RCC_BDMA2_IS_CLK_SLEEP_ENABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMALPEN)) != 0U) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_ADC3LPEN)) != 0U) +#endif /*ADC3*/ +#define __HAL_RCC_BKPRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BKPRAMLPEN)) != 0U) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_SRDSRAMLPEN)) != 0U) +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_ENABLED __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_ENABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_ENABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_D3SRAM1LPEN)) != 0U) +#endif + +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOALPEN)) == 0U) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOBLPEN)) == 0U) +#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOCLPEN)) == 0U) +#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIODLPEN)) == 0U) +#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOELPEN)) == 0U) +#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOFLPEN)) == 0U) +#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOGLPEN)) == 0U) +#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOHLPEN)) == 0U) +#if defined(GPIOI) +#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOILPEN)) == 0U) +#endif /* GPIOI */ +#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOJLPEN)) == 0U) +#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_GPIOKLPEN)) == 0U) +#if defined(RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_CRCLPEN)) == 0U) +#endif +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMA2LPEN)) == 0U) +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_DISABLED __HAL_RCC_BDMA2_IS_CLK_SLEEP_DISABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_BDMA_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BDMALPEN)) == 0U) +#endif /*BDMA2*/ +#if defined(ADC3) +#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_ADC3LPEN)) == 0U) +#endif /*ADC3*/ +#define __HAL_RCC_BKPRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_BKPRAMLPEN)) == 0U) +#if defined(RCC_AHB4LPENR_SRDSRAMLPEN) +#define __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_SRDSRAMLPEN)) == 0U) +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_DISABLED __HAL_RCC_SRDSRAM_IS_CLK_SLEEP_DISABLED /* For API backward compatibility*/ +#else +#define __HAL_RCC_D3SRAM1_IS_CLK_SLEEP_DISABLED() ((RCC->AHB4LPENR & (RCC_AHB4LPENR_D3SRAM1LPEN)) == 0U) +#endif + + +/** @brief ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_ENABLE() (RCC->APB3LPENR) |= (RCC_APB3LPENR_DSILPEN) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE() (RCC->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN) + +#if defined(LTDC) +#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_CLK_SLEEP_DISABLE() (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_DSILPEN) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE() (RCC->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN) + + +/** @brief Get the enable or disable status of the APB3 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_LTDCLPEN)) != 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_ENABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_DSILPEN)) != 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_SLEEP_ENABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_WWDG1LPEN)) != 0U) + +#if defined(LTDC) +#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_LTDCLPEN)) == 0U) +#endif /* LTDC */ +#if defined(DSI) +#define __HAL_RCC_DSI_IS_CLK_SLEEP_DISABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_DSILPEN)) == 0U) +#endif /*DSI*/ +#define __HAL_RCC_WWDG1_IS_CLK_SLEEP_DISABLED() ((RCC->APB3LPENR & (RCC_APB3LPENR_WWDG1LPEN)) == 0U) + + +/** @brief ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_WWDG2LPEN) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN) +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_I2C5LPEN) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_DAC12_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_CRS_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_MDIOS_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_FDCAN_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN) +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_TIM23LPEN) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_SLEEP_ENABLE() (RCC->APB1HLPENR) |= (RCC_APB1HLPENR_TIM24LPEN) +#endif /* TIM24 */ + + +#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN) + +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_WWDG2LPEN) +#endif /*DUAL_CORE*/ + +#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN) +#if defined(I2C5) +#define __HAL_RCC_I2C5_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C5LPEN) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_DAC12_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_CRS_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_MDIOS_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_FDCAN_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN) +#if defined(TIM23) +#define __HAL_RCC_TIM23_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_TIM23LPEN) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_CLK_SLEEP_DISABLE() (RCC->APB1HLPENR) &= ~ (RCC_APB1HLPENR_TIM24LPEN) +#endif /* TIM24 */ + + +/** @brief Get the enable or disable status of the APB1 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM2LPEN)) != 0U) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM3LPEN)) != 0U) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM4LPEN)) != 0U) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM5LPEN)) != 0U) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM6LPEN)) != 0U) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM7LPEN)) != 0U) +#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM12LPEN)) != 0U) +#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM13LPEN)) != 0U) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM14LPEN)) != 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_LPTIM1LPEN)) != 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_WWDG2LPEN)) != 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI2LPEN)) != 0U) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI3LPEN)) != 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPDIFRXLPEN)) != 0U) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART2LPEN)) != 0U) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART3LPEN)) != 0U) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART4LPEN)) != 0U) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART5LPEN)) != 0U) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C1LPEN)) != 0U) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C2LPEN)) != 0U) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C3LPEN)) != 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C5LPEN)) != 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_CECLPEN)) != 0U) +#define __HAL_RCC_DAC12_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_DAC12LPEN)) != 0U) +#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART7LPEN)) != 0U) +#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART8LPEN)) != 0U) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_CRSLPEN)) != 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_SWPMILPEN)) != 0U) +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_OPAMPLPEN)) != 0U) +#define __HAL_RCC_MDIOS_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_MDIOSLPEN)) != 0U) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_FDCANLPEN)) != 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM23LPEN)) != 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_SLEEP_ENABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM24LPEN)) != 0U) +#endif /* TIM24 */ + +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM2LPEN)) == 0U) +#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM3LPEN)) == 0U) +#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM4LPEN)) == 0U) +#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM5LPEN)) == 0U) +#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM6LPEN)) == 0U) +#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM7LPEN)) == 0U) +#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM12LPEN)) == 0U) +#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM13LPEN)) == 0U) +#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_TIM14LPEN)) == 0U) +#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_LPTIM1LPEN)) == 0U) +#if defined(DUAL_CORE) +#define __HAL_RCC_WWDG2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_WWDG2LPEN)) == 0U) +#endif /*DUAL_CORE*/ +#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI2LPEN)) == 0U) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPI3LPEN)) == 0U) +#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_SPDIFRXLPEN)) == 0U) +#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART2LPEN)) == 0U) +#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_USART3LPEN)) == 0U) +#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART4LPEN)) == 0U) +#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART5LPEN)) == 0U) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C1LPEN)) == 0U) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C2LPEN)) == 0U) +#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C3LPEN)) == 0U) +#if defined(I2C5) +#define __HAL_RCC_I2C5_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_I2C5LPEN)) == 0U) +#endif /* I2C5 */ +#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_CECLPEN)) == 0U) +#define __HAL_RCC_DAC12_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_DAC12LPEN)) == 0U) +#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART7LPEN)) == 0U) +#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LLPENR & (RCC_APB1LLPENR_UART8LPEN)) == 0U) +#define __HAL_RCC_CRS_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_CRSLPEN)) == 0U) +#define __HAL_RCC_SWPMI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_SWPMILPEN)) == 0U) +#define __HAL_RCC_OPAMP_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_OPAMPLPEN)) == 0U) +#define __HAL_RCC_MDIOS_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_MDIOSLPEN)) == 0U) +#define __HAL_RCC_FDCAN_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_FDCANLPEN)) == 0U) +#if defined(TIM23) +#define __HAL_RCC_TIM23_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM23LPEN)) == 0U) +#endif /* TIM23 */ +#if defined(TIM24) +#define __HAL_RCC_TIM24_IS_CLK_SLEEP_DISABLED() ((RCC->APB1HLPENR & (RCC_APB1HLPENR_TIM24LPEN)) == 0U) +#endif /* TIM24 */ + + +/** @brief ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN) +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_UART9LPEN) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_USART10LPEN) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_TIM15_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_TIM16_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN) +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN) +#if defined(UART9) +#define __HAL_RCC_UART9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_UART9LPEN) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_USART10LPEN) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_TIM15_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_TIM16_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_TIM17_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN) +#if defined(SAI2) +#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN) +#endif /*HRTIM1*/ + + +/** @brief Get the enable or disable status of the APB2 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != 0U) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != 0U) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != 0U) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != 0U) +#if defined(UART9) +#define __HAL_RCC_UART9_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_UART9LPEN)) != 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART10LPEN)) != 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != 0U) +#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != 0U) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM15LPEN)) != 0U) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM16LPEN)) != 0U) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM17LPEN)) != 0U) +#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != 0U) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != 0U) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI3LPEN)) != 0U) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) != 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_SLEEP_ENABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_HRTIMLPEN)) != 0U) +#endif /*HRTIM1*/ + +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == 0U) +#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == 0U) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == 0U) +#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == 0U) +#if defined(UART9) +#define __HAL_RCC_USART9_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART9LPEN)) == 0U) +#endif /*UART9*/ +#if defined(USART10) +#define __HAL_RCC_USART10_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART10LPEN)) == 0U) +#endif /*USART10*/ +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == 0U) +#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == 0U) +#define __HAL_RCC_TIM15_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM15LPEN)) == 0U) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM16LPEN)) == 0U) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM17LPEN)) == 0U) +#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == 0U) +#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == 0U) +#if defined(SAI2) +#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == 0U) +#endif /* SAI2 */ +#if defined(SAI3) +#define __HAL_RCC_SAI3_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI3LPEN)) == 0U) +#endif /*SAI3*/ +#define __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_DFSDM1LPEN)) == 0U) +#if defined(HRTIM1) +#define __HAL_RCC_HRTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_HRTIMLPEN)) == 0U) +#endif /*HRTIM1*/ + +/** @brief ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_LPTIM3_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_DAC2LPEN) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_VREF_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_RTC_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN) +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_DTSLPEN) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_SLEEP_ENABLE() (RCC->APB4LPENR) |= (RCC_APB4LPENR_DFSDM2LPEN) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_LPTIM3_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_DAC2LPEN) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_VREF_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_RTC_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN) +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_DTSLPEN) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLK_SLEEP_DISABLE() (RCC->APB4LPENR) &= ~ (RCC_APB4LPENR_DFSDM2LPEN) +#endif /*DFSDM2*/ + + +/** @brief Get the enable or disable status of the APB4 peripheral clock during Low Poser (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SYSCFGLPEN)) != 0U) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPUART1LPEN)) != 0U) +#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SPI6LPEN)) != 0U) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_I2C4LPEN)) != 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM2LPEN)) != 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM3LPEN)) != 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM4LPEN)) != 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM5LPEN)) != 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DAC2LPEN)) != 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_COMP12LPEN)) != 0U) +#define __HAL_RCC_VREF_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_VREFLPEN)) != 0U) +#define __HAL_RCC_RTC_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_RTCAPBLPEN)) != 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SAI4LPEN)) != 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DTSLPEN)) != 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_SLEEP_ENABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DFSDM2LPEN)) != 0U) +#endif /*DFSDM2*/ + +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SYSCFGLPEN)) == 0U) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPUART1LPEN)) == 0U) +#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SPI6LPEN)) == 0U) +#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_I2C4LPEN)) == 0U) +#define __HAL_RCC_LPTIM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM2LPEN)) == 0U) +#define __HAL_RCC_LPTIM3_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM3LPEN)) == 0U) +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM4LPEN)) == 0U) +#endif /*LPTIM4*/ +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_LPTIM5LPEN)) == 0U) +#endif /*LPTIM5*/ +#if defined(DAC2) +#define __HAL_RCC_DAC2_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DAC2LPEN)) == 0U) +#endif /*DAC2*/ +#define __HAL_RCC_COMP12_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_COMP12LPEN)) == 0U) +#define __HAL_RCC_VREF_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_VREFLPEN)) == 0U) +#define __HAL_RCC_RTC_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_RTCAPBLPEN)) == 0U) +#if defined(SAI4) +#define __HAL_RCC_SAI4_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_SAI4LPEN)) == 0U) +#endif /*SAI4*/ +#if defined(DTS) +#define __HAL_RCC_DTS_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DTSLPEN)) == 0U) +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_IS_CLK_SLEEP_DISABLED() ((RCC->APB4LPENR & (RCC_APB4LPENR_DFSDM2LPEN)) == 0U) +#endif /*DFSDM2*/ + + +#if defined(DUAL_CORE) + +/** @brief Enable or disable the RCC_C1 AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ +#define __HAL_RCC_C1_MDMA_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C1_DMA2D_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C1_JPGDEC_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C1_FLASH_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C1_FMC_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C1_QSPI_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C1_SDMMC1_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C1_DTCM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C1_DTCM2_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C1_ITCM_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C1_D1SRAM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN)) + + +#define __HAL_RCC_C1_MDMA_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C1_DMA2D_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C1_JPGDEC_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C1_FLASH_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C1_FMC_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C1_QSPI_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C1_SDMMC1_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C1_DTCM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C1_DTCM2_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C1_ITCM_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C1_D1SRAM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN)) + + + +/** @brief ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_DMA1_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C1_DMA2_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C1_ADC12_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C1_ETH1MAC_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C1_ETH1TX_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C1_ETH1RX_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC_C1->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +#define __HAL_RCC_C1_DMA1_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C1_DMA2_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C1_ADC12_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C1_ETH1MAC_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C1_ETH1TX_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C1_ETH1RX_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C1_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C1_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC_C1->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +/** @brief ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_DCMI_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C1_RNG_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C1_SDMMC2_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C1_D2SRAM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C1_D2SRAM2_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C1_D2SRAM3_CLK_SLEEP_ENABLE() (RCC_C1->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN)) + +#define __HAL_RCC_C1_DCMI_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C1_CRYP_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C1_HASH_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C1_RNG_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C1_SDMMC2_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C1_D2SRAM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C1_D2SRAM2_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C1_D2SRAM3_CLK_SLEEP_DISABLE() (RCC_C1->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN)) + +/** @brief ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_GPIOA_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C1_GPIOB_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C1_GPIOC_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C1_GPIOD_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C1_GPIOE_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C1_GPIOF_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C1_GPIOG_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C1_GPIOH_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C1_GPIOI_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C1_GPIOJ_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C1_GPIOK_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C1_CRC_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C1_BDMA_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C1_ADC3_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C1_BKPRAM_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C1_D3SRAM1_CLK_SLEEP_ENABLE() (RCC_C1->AHB4LPENR |= (RCC_AHB4LPENR_D3SRAM1LPEN)) + +#define __HAL_RCC_C1_GPIOA_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C1_GPIOB_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C1_GPIOC_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C1_GPIOD_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C1_GPIOE_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C1_GPIOF_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C1_GPIOG_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C1_GPIOH_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C1_GPIOI_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C1_GPIOJ_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C1_GPIOK_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C1_CRC_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C1_BDMA_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C1_ADC3_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C1_BKPRAM_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C1_D3SRAM1_CLK_SLEEP_DISABLE() (RCC_C1->AHB4LPENR &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN)) + +/** @brief ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_LTDC_CLK_SLEEP_ENABLE() (RCC_C1->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C1_DSI_CLK_SLEEP_ENABLE() (RCC_C1->APB3LPENR) |= (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C1_WWDG1_CLK_SLEEP_ENABLE() (RCC_C1->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN) + +#define __HAL_RCC_C1_LTDC_CLK_SLEEP_DISABLE() (RCC_C1->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C1_DSI_CLK_SLEEP_DISABLE() (RCC_C1->APB3LPENR) &= ~ (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C1_WWDG1_CLK_SLEEP_DISABLE() (RCC_C1->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN) + +/** @brief ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_TIM2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C1_TIM3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C1_TIM4_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C1_TIM5_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C1_TIM6_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C1_TIM7_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C1_TIM12_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C1_TIM13_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C1_TIM14_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C1_LPTIM1_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C1_WWDG2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C1_SPI2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C1_SPI3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C1_SPDIFRX_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C1_USART2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C1_USART3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C1_UART4_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C1_UART5_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C1_I2C1_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C1_I2C2_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C1_I2C3_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C1_CEC_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C1_DAC12_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C1_UART7_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C1_UART8_CLK_SLEEP_ENABLE() (RCC_C1->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C1_CRS_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C1_SWPMI_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C1_OPAMP_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C1_MDIOS_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C1_FDCAN_CLK_SLEEP_ENABLE() (RCC_C1->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN) + + +#define __HAL_RCC_C1_TIM2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C1_TIM3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C1_TIM4_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C1_TIM5_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C1_TIM6_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C1_TIM7_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C1_TIM12_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C1_TIM13_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C1_TIM14_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C1_LPTIM1_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C1_WWDG2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C1_SPI2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C1_SPI3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C1_SPDIFRX_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C1_USART2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C1_USART3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C1_UART4_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C1_UART5_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C1_I2C1_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C1_I2C2_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C1_I2C3_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C1_CEC_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C1_DAC12_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C1_UART7_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C1_UART8_CLK_SLEEP_DISABLE() (RCC_C1->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C1_CRS_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C1_SWPMI_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C1_OPAMP_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C1_MDIOS_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C1_FDCAN_CLK_SLEEP_DISABLE() (RCC_C1->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN) + +/** @brief ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_TIM1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C1_TIM8_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C1_USART1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C1_USART6_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C1_SPI1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C1_SPI4_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C1_TIM15_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C1_TIM16_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C1_TIM17_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C1_SPI5_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C1_SAI1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C1_SAI2_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C1_SAI3_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C1_DFSDM1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C1_HRTIM1_CLK_SLEEP_ENABLE() (RCC_C1->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN) + +#define __HAL_RCC_C1_TIM1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C1_TIM8_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C1_USART1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C1_USART6_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C1_SPI1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C1_SPI4_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C1_TIM15_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C1_TIM16_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C1_TIM17_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C1_SPI5_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C1_SAI1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C1_SAI2_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C1_SAI3_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C1_DFSDM1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C1_HRTIM1_CLK_SLEEP_DISABLE() (RCC_C1->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN) + +/** @brief ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C1_SYSCFG_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C1_LPUART1_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C1_SPI6_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C1_I2C4_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C1_LPTIM2_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C1_LPTIM3_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C1_LPTIM4_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C1_LPTIM5_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C1_COMP12_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C1_VREF_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C1_SAI4_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C1_RTC_CLK_SLEEP_ENABLE() (RCC_C1->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN) + + +#define __HAL_RCC_C1_SYSCFG_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C1_LPUART1_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C1_SPI6_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C1_I2C4_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C1_LPTIM2_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C1_LPTIM3_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C1_LPTIM4_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C1_LPTIM5_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C1_COMP12_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C1_VREF_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C1_SAI4_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C1_RTC_CLK_SLEEP_DISABLE() (RCC_C1->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN) + +/** @brief Enable or disable the RCC_C2 AHB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. + * @note By default, all peripheral clocks are enabled during SLEEP mode. + */ + + +#define __HAL_RCC_C2_MDMA_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C2_DMA2D_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C2_JPGDEC_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C2_FLASH_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C2_FMC_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C2_QSPI_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C2_SDMMC1_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C2_DTCM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C2_DTCM2_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C2_ITCM_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C2_D1SRAM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB3LPENR |= (RCC_AHB3LPENR_AXISRAMLPEN)) + + +#define __HAL_RCC_C2_MDMA_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_MDMALPEN)) +#define __HAL_RCC_C2_DMA2D_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_DMA2DLPEN)) +#define __HAL_RCC_C2_JPGDEC_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_JPGDECLPEN)) +#define __HAL_RCC_C2_FLASH_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_FLASHLPEN)) +#define __HAL_RCC_C2_FMC_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_FMCLPEN)) +#define __HAL_RCC_C2_QSPI_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_QSPILPEN)) +#define __HAL_RCC_C2_SDMMC1_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_SDMMC1LPEN)) +#define __HAL_RCC_C2_DTCM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM1LPEN)) +#define __HAL_RCC_C2_DTCM2_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_DTCM2LPEN)) +#define __HAL_RCC_C2_ITCM_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_ITCMLPEN)) +#define __HAL_RCC_C2_D1SRAM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB3LPENR &= ~ (RCC_AHB3LPENR_AXISRAMLPEN)) + + + +/** @brief ENABLE or disable the AHB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_DMA1_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C2_DMA2_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C2_ADC12_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C2_ETH1MAC_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C2_ETH1TX_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C2_ETH1RX_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() (RCC_C2->AHB1LPENR |= (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +#define __HAL_RCC_C2_DMA1_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA1LPEN)) +#define __HAL_RCC_C2_DMA2_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_DMA2LPEN)) +#define __HAL_RCC_C2_ADC12_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ADC12LPEN)) +#define __HAL_RCC_C2_ETH1MAC_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1MACLPEN)) +#define __HAL_RCC_C2_ETH1TX_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1TXLPEN)) +#define __HAL_RCC_C2_ETH1RX_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_ETH1RXLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSLPEN)) +#define __HAL_RCC_C2_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB1OTGHSULPILPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSLPEN)) +#define __HAL_RCC_C2_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() (RCC_C2->AHB1LPENR &= ~ (RCC_AHB1LPENR_USB2OTGHSULPILPEN)) + +/** @brief ENABLE or disable the AHB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_DCMI_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C2_RNG_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C2_SDMMC2_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C2_D2SRAM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C2_D2SRAM2_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C2_D2SRAM3_CLK_SLEEP_ENABLE() (RCC_C2->AHB2LPENR |= (RCC_AHB2LPENR_D2SRAM3LPEN)) + +#define __HAL_RCC_C2_DCMI_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_DCMILPEN)) +#if defined(CRYP) +#define __HAL_RCC_C2_CRYP_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_CRYPLPEN)) +#endif /* CRYP */ +#if defined(HASH) +#define __HAL_RCC_C2_HASH_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_HASHLPEN)) +#endif /* HASH */ +#define __HAL_RCC_C2_RNG_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_RNGLPEN)) +#define __HAL_RCC_C2_SDMMC2_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_SDMMC2LPEN)) +#define __HAL_RCC_C2_D2SRAM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM1LPEN)) +#define __HAL_RCC_C2_D2SRAM2_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM2LPEN)) +#define __HAL_RCC_C2_D2SRAM3_CLK_SLEEP_DISABLE() (RCC_C2->AHB2LPENR &= ~ (RCC_AHB2LPENR_D2SRAM3LPEN)) + +/** @brief ENABLE or disable the AHB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_GPIOA_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C2_GPIOB_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C2_GPIOC_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C2_GPIOD_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C2_GPIOE_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C2_GPIOF_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C2_GPIOG_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C2_GPIOH_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C2_GPIOI_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C2_GPIOJ_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C2_GPIOK_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C2_CRC_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C2_BDMA_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C2_ADC3_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C2_BKPRAM_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR) |= (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C2_D3SRAM1_CLK_SLEEP_ENABLE() (RCC_C2->AHB4LPENR |= (RCC_AHB4LPENR_D3SRAM1LPEN)) + +#define __HAL_RCC_C2_GPIOA_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOALPEN) +#define __HAL_RCC_C2_GPIOB_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOBLPEN) +#define __HAL_RCC_C2_GPIOC_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOCLPEN) +#define __HAL_RCC_C2_GPIOD_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIODLPEN) +#define __HAL_RCC_C2_GPIOE_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOELPEN) +#define __HAL_RCC_C2_GPIOF_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOFLPEN) +#define __HAL_RCC_C2_GPIOG_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOGLPEN) +#define __HAL_RCC_C2_GPIOH_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOHLPEN) +#define __HAL_RCC_C2_GPIOI_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOILPEN) +#define __HAL_RCC_C2_GPIOJ_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOJLPEN) +#define __HAL_RCC_C2_GPIOK_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_GPIOKLPEN) +#define __HAL_RCC_C2_CRC_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_CRCLPEN) +#define __HAL_RCC_C2_BDMA_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BDMALPEN) +#define __HAL_RCC_C2_ADC3_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_ADC3LPEN) +#define __HAL_RCC_C2_BKPRAM_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR) &= ~ (RCC_AHB4LPENR_BKPRAMLPEN) +#define __HAL_RCC_C2_D3SRAM1_CLK_SLEEP_DISABLE() (RCC_C2->AHB4LPENR &= ~ (RCC_AHB4LPENR_D3SRAM1LPEN)) + +/** @brief ENABLE or disable the APB3 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_LTDC_CLK_SLEEP_ENABLE() (RCC_C2->APB3LPENR) |= (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C2_DSI_CLK_SLEEP_ENABLE() (RCC_C2->APB3LPENR) |= (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C2_WWDG1_CLK_SLEEP_ENABLE() (RCC_C2->APB3LPENR) |= (RCC_APB3LPENR_WWDG1LPEN) + +#define __HAL_RCC_C2_LTDC_CLK_SLEEP_DISABLE() (RCC_C2->APB3LPENR) &= ~ (RCC_APB3LPENR_LTDCLPEN) +#define __HAL_RCC_C2_DSI_CLK_SLEEP_DISABLE() (RCC_C2->APB3LPENR) &= ~ (RCC_APB3LPENR_DSILPEN) +#define __HAL_RCC_C2_WWDG1_CLK_SLEEP_DISABLE() (RCC_C2->APB3LPENR) &= ~ (RCC_APB3LPENR_WWDG1LPEN) + +/** @brief ENABLE or disable the APB1 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_TIM2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C2_TIM3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C2_TIM4_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C2_TIM5_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C2_TIM6_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C2_TIM7_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C2_TIM12_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C2_TIM13_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C2_TIM14_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C2_LPTIM1_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C2_WWDG2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C2_SPI2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C2_SPI3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C2_SPDIFRX_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C2_USART2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C2_USART3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C2_UART4_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C2_UART5_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C2_I2C1_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C2_I2C2_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C2_I2C3_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C2_CEC_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C2_DAC12_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C2_UART7_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C2_UART8_CLK_SLEEP_ENABLE() (RCC_C2->APB1LLPENR) |= (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C2_CRS_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C2_SWPMI_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C2_OPAMP_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C2_MDIOS_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C2_FDCAN_CLK_SLEEP_ENABLE() (RCC_C2->APB1HLPENR) |= (RCC_APB1HLPENR_FDCANLPEN) + + +#define __HAL_RCC_C2_TIM2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM2LPEN) +#define __HAL_RCC_C2_TIM3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM3LPEN) +#define __HAL_RCC_C2_TIM4_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM4LPEN) +#define __HAL_RCC_C2_TIM5_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM5LPEN) +#define __HAL_RCC_C2_TIM6_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM6LPEN) +#define __HAL_RCC_C2_TIM7_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM7LPEN) +#define __HAL_RCC_C2_TIM12_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM12LPEN) +#define __HAL_RCC_C2_TIM13_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM13LPEN) +#define __HAL_RCC_C2_TIM14_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_TIM14LPEN) +#define __HAL_RCC_C2_LPTIM1_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_LPTIM1LPEN) +#define __HAL_RCC_C2_WWDG2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_WWDG2LPEN) +#define __HAL_RCC_C2_SPI2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI2LPEN) +#define __HAL_RCC_C2_SPI3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPI3LPEN) +#define __HAL_RCC_C2_SPDIFRX_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_SPDIFRXLPEN) +#define __HAL_RCC_C2_USART2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART2LPEN) +#define __HAL_RCC_C2_USART3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_USART3LPEN) +#define __HAL_RCC_C2_UART4_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART4LPEN) +#define __HAL_RCC_C2_UART5_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART5LPEN) +#define __HAL_RCC_C2_I2C1_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C1LPEN) +#define __HAL_RCC_C2_I2C2_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C2LPEN) +#define __HAL_RCC_C2_I2C3_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_I2C3LPEN) +#define __HAL_RCC_C2_CEC_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_CECLPEN) +#define __HAL_RCC_C2_DAC12_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_DAC12LPEN) +#define __HAL_RCC_C2_UART7_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART7LPEN) +#define __HAL_RCC_C2_UART8_CLK_SLEEP_DISABLE() (RCC_C2->APB1LLPENR) &= ~ (RCC_APB1LLPENR_UART8LPEN) +#define __HAL_RCC_C2_CRS_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_CRSLPEN) +#define __HAL_RCC_C2_SWPMI_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_SWPMILPEN) +#define __HAL_RCC_C2_OPAMP_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_OPAMPLPEN) +#define __HAL_RCC_C2_MDIOS_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_MDIOSLPEN) +#define __HAL_RCC_C2_FDCAN_CLK_SLEEP_DISABLE() (RCC_C2->APB1HLPENR) &= ~ (RCC_APB1HLPENR_FDCANLPEN) + +/** @brief ENABLE or disable the APB2 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_TIM1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C2_TIM8_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C2_USART1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C2_USART6_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C2_SPI1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C2_SPI4_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C2_TIM15_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C2_TIM16_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C2_TIM17_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C2_SPI5_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C2_SAI1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C2_SAI2_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C2_SAI3_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C2_DFSDM1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C2_HRTIM1_CLK_SLEEP_ENABLE() (RCC_C2->APB2LPENR) |= (RCC_APB2LPENR_HRTIMLPEN) + +#define __HAL_RCC_C2_TIM1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM1LPEN) +#define __HAL_RCC_C2_TIM8_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM8LPEN) +#define __HAL_RCC_C2_USART1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_USART1LPEN) +#define __HAL_RCC_C2_USART6_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_USART6LPEN) +#define __HAL_RCC_C2_SPI1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI1LPEN) +#define __HAL_RCC_C2_SPI4_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI4LPEN) +#define __HAL_RCC_C2_TIM15_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM15LPEN) +#define __HAL_RCC_C2_TIM16_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM16LPEN) +#define __HAL_RCC_C2_TIM17_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_TIM17LPEN) +#define __HAL_RCC_C2_SPI5_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SPI5LPEN) +#define __HAL_RCC_C2_SAI1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI1LPEN) +#define __HAL_RCC_C2_SAI2_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI2LPEN) +#define __HAL_RCC_C2_SAI3_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_SAI3LPEN) +#define __HAL_RCC_C2_DFSDM1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_DFSDM1LPEN) +#define __HAL_RCC_C2_HRTIM1_CLK_SLEEP_DISABLE() (RCC_C2->APB2LPENR) &= ~ (RCC_APB2LPENR_HRTIMLPEN) + +/** @brief ENABLE or disable the APB4 peripheral clock during Low Power (Sleep) mode. + * @note Peripheral clock gating in SLEEP mode can be used to further reduce + * power consumption. + * @note After wakeup from SLEEP mode, the peripheral clock is ENABLEd again. + * @note By default, all peripheral clocks are ENABLEd during SLEEP mode. + */ + +#define __HAL_RCC_C2_SYSCFG_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C2_LPUART1_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C2_SPI6_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C2_I2C4_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C2_LPTIM2_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C2_LPTIM3_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C2_LPTIM4_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C2_LPTIM5_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C2_COMP12_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C2_VREF_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C2_SAI4_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C2_RTC_CLK_SLEEP_ENABLE() (RCC_C2->APB4LPENR) |= (RCC_APB4LPENR_RTCAPBLPEN) + +#define __HAL_RCC_C2_SYSCFG_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_SYSCFGLPEN) +#define __HAL_RCC_C2_LPUART1_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPUART1LPEN) +#define __HAL_RCC_C2_SPI6_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_SPI6LPEN) +#define __HAL_RCC_C2_I2C4_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_I2C4LPEN) +#define __HAL_RCC_C2_LPTIM2_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM2LPEN) +#define __HAL_RCC_C2_LPTIM3_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM3LPEN) +#define __HAL_RCC_C2_LPTIM4_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM4LPEN) +#define __HAL_RCC_C2_LPTIM5_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_LPTIM5LPEN) +#define __HAL_RCC_C2_COMP12_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_COMP12LPEN) +#define __HAL_RCC_C2_VREF_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_VREFLPEN) +#define __HAL_RCC_C2_SAI4_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_SAI4LPEN) +#define __HAL_RCC_C2_RTC_CLK_SLEEP_DISABLE() (RCC_C2->APB4LPENR) &= ~ (RCC_APB4LPENR_RTCAPBLPEN) + +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** @brief Enable or disable peripheral bus clock when D3 domain is in DRUN + * @note After reset (default config), peripheral clock is disabled when both CPUs are in CSTOP + */ +#else +/** @brief Enable or disable peripheral bus clock when D3 domain is in DRUN + * @note After reset (default config), peripheral clock is disabled when CPU is in CSTOP + */ +#endif /*DUAL_CORE*/ + +#if defined(RCC_D3AMR_BDMAAMEN) +#define __HAL_RCC_BDMA_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_BDMAAMEN) +#endif +#if defined(RCC_D3AMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPUART1AMEN) +#endif +#if defined(RCC_D3AMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_SPI6AMEN) +#endif +#if defined(RCC_D3AMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_I2C4AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM2AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM3AMEN) +#endif +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM4AMEN) +#endif +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_LPTIM5AMEN) +#endif +#if defined(RCC_D3AMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_COMP12AMEN) +#endif +#if defined(RCC_D3AMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_VREFAMEN) +#endif +#if defined(RCC_D3AMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_RTCAMEN) +#endif +#if defined(RCC_D3AMR_CRCAMEN) +#define __HAL_RCC_CRC_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_CRCAMEN) +#endif +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_SAI4AMEN) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_ADC3AMEN) +#endif +#if defined(RCC_D3AMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_DTSAMEN) +#endif +#if defined(RCC_D3AMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_BKPRAMAMEN) +#endif +#if defined(RCC_D3AMR_SRAM4AMEN) +#define __HAL_RCC_D3SRAM1_CLKAM_ENABLE() (RCC->D3AMR) |= (RCC_D3AMR_SRAM4AMEN) +#endif + +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_BDMA2AMEN) +#endif +#if defined(RCC_SRDAMR_GPIOAMEN) +#define __HAL_RCC_GPIO_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_GPIOAMEN) +#endif +#if defined(RCC_SRDAMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_LPUART1AMEN) +#endif +#if defined(RCC_SRDAMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_SPI6AMEN) +#endif +#if defined(RCC_SRDAMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_I2C4AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_LPTIM2AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_LPTIM3AMEN) +#endif +#if defined(DAC2) +#define __HAL_RCC_DAC2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_DAC2AMEN) +#endif +#if defined(RCC_SRDAMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_COMP12AMEN) +#endif +#if defined(RCC_SRDAMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_VREFAMEN) +#endif +#if defined(RCC_SRDAMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_RTCAMEN) +#endif +#if defined(RCC_SRDAMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_DTSAMEN) +#endif +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_DFSDM2AMEN) +#endif +#if defined(RCC_SRDAMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_BKPRAMAMEN) +#endif +#if defined(RCC_SRDAMR_SRDSRAMAMEN) +#define __HAL_RCC_SRDSRAM_CLKAM_ENABLE() (RCC->SRDAMR) |= (RCC_SRDAMR_SRDSRAMAMEN) +#endif + +#if defined(RCC_D3AMR_BDMAAMEN) +#define __HAL_RCC_BDMA_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_BDMAAMEN) +#endif +#if defined(RCC_D3AMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPUART1AMEN) +#endif +#if defined(RCC_D3AMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_SPI6AMEN) +#endif +#if defined(RCC_D3AMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_I2C4AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM2AMEN) +#endif +#if defined(RCC_D3AMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM3AMEN) +#endif +#if defined(LPTIM4) +#define __HAL_RCC_LPTIM4_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM4AMEN) +#endif +#if defined(LPTIM5) +#define __HAL_RCC_LPTIM5_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_LPTIM5AMEN) +#endif +#if defined(RCC_D3AMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_COMP12AMEN) +#endif +#if defined(RCC_D3AMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_VREFAMEN) +#endif +#if defined(RCC_D3AMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_RTCAMEN) +#endif +#if defined(RCC_D3AMR_CRCAMEN) +#define __HAL_RCC_CRC_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_CRCAMEN) +#endif +#if defined(SAI4) +#define __HAL_RCC_SAI4_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_SAI4AMEN) +#endif +#if defined(ADC3) +#define __HAL_RCC_ADC3_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_ADC3AMEN) +#endif +#if defined(RCC_D3AMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_DTSAMEN) +#endif +#if defined(RCC_D3AMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_DISABLE() (RCC->D3AMR) &= ~ (RCC_D3AMR_BKPRAMAMEN) +#endif +#if defined(RCC_D3AMR_SRAM4AMEN) +#define __HAL_RCC_D3SRAM1_CLKAM_DISABLE() (RCC->D3AMR)&= ~ (RCC_D3AMR_SRAM4AMEN) +#endif + +#if defined(BDMA2) +#define __HAL_RCC_BDMA2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_BDMA2AMEN) +#endif +#if defined(RCC_SRDAMR_GPIOAMEN) +#define __HAL_RCC_GPIO_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_GPIOAMEN) +#endif +#if defined(RCC_SRDAMR_LPUART1AMEN) +#define __HAL_RCC_LPUART1_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_LPUART1AMEN) +#endif +#if defined(RCC_SRDAMR_SPI6AMEN) +#define __HAL_RCC_SPI6_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_SPI6AMEN) +#endif +#if defined(RCC_SRDAMR_I2C4AMEN) +#define __HAL_RCC_I2C4_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_I2C4AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM2AMEN) +#define __HAL_RCC_LPTIM2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_LPTIM2AMEN) +#endif +#if defined(RCC_SRDAMR_LPTIM3AMEN) +#define __HAL_RCC_LPTIM3_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_LPTIM3AMEN) +#endif +#if defined(RCC_SRDAMR_DAC2AMEN) +#define __HAL_RCC_DAC2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_DAC2AMEN) +#endif +#if defined(RCC_SRDAMR_COMP12AMEN) +#define __HAL_RCC_COMP12_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_COMP12AMEN) +#endif +#if defined(RCC_SRDAMR_VREFAMEN) +#define __HAL_RCC_VREF_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_VREFAMEN) +#endif +#if defined(RCC_SRDAMR_RTCAMEN) +#define __HAL_RCC_RTC_CLKAM_DISABLE() (RCC->SRDAMR) &= ~(RCC_SRDAMR_RTCAMEN) +#endif +#if defined(RCC_SRDAMR_DTSAMEN) +#define __HAL_RCC_DTS_CLKAM_DISABLE() (RCC->SRDAMR) &= ~(RCC_SRDAMR_DTSAMEN) +#endif +#if defined(DFSDM2_BASE) +#define __HAL_RCC_DFSDM2_CLKAM_DISABLE() (RCC->SRDAMR) &= ~(RCC_SRDAMR_DFSDM2AMEN) +#endif +#if defined(RCC_SRDAMR_BKPRAMAMEN) +#define __HAL_RCC_BKPRAM_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_BKPRAMAMEN) +#endif +#if defined(RCC_SRDAMR_SRDSRAMAMEN) +#define __HAL_RCC_SRDSRAM_CLKAM_DISABLE() (RCC->SRDAMR) &= ~ (RCC_SRDAMR_SRDSRAMAMEN) +#endif + + +#if defined(RCC_CKGAENR_AXICKG) +/** @brief Macro to enable or disable the RCC_CKGAENR bits (AXI clocks gating enable register). + */ + +#define __HAL_RCC_AXI_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXICKG) +#define __HAL_RCC_AHB_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AHBCKG) +#define __HAL_RCC_CPU_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_CPUCKG) +#define __HAL_RCC_SDMMC_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_SDMMCCKG) +#define __HAL_RCC_MDMA_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_MDMACKG) +#define __HAL_RCC_DMA2D_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_DMA2DCKG) +#define __HAL_RCC_LTDC_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_LTDCCKG) +#define __HAL_RCC_GFXMMUM_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_GFXMMUMCKG) +#define __HAL_RCC_AHB12_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AHB12CKG) +#define __HAL_RCC_AHB34_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AHB34CKG) +#define __HAL_RCC_FLIFT_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_FLIFTCKG) +#define __HAL_RCC_OCTOSPI2_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_OCTOSPI2CKG) +#define __HAL_RCC_FMC_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_FMCCKG) +#define __HAL_RCC_OCTOSPI1_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_OCTOSPI1CKG) +#define __HAL_RCC_AXIRAM1_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXIRAM1CKG) +#define __HAL_RCC_AXIRAM2_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXIRAM2CKG) +#define __HAL_RCC_AXIRAM3_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_AXIRAM3CKG) +#define __HAL_RCC_GFXMMUS_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_GFXMMUSCKG) +#define __HAL_RCC_ECCRAM_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_ECCRAMCKG) +#define __HAL_RCC_EXTI_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_EXTICKG) +#define __HAL_RCC_JTAG_CLKGA_ENABLE() (RCC->CKGAENR) |= (RCC_CKGAENR_JTAGCKG) + + +#define __HAL_RCC_AXI_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXICKG) +#define __HAL_RCC_AHB_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AHBCKG) +#define __HAL_RCC_CPU_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_CPUCKG) +#define __HAL_RCC_SDMMC_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_SDMMCCKG) +#define __HAL_RCC_MDMA_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_MDMACKG) +#define __HAL_RCC_DMA2D_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_DMA2DCKG) +#define __HAL_RCC_LTDC_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_LTDCCKG) +#define __HAL_RCC_GFXMMUM_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_GFXMMUMCKG) +#define __HAL_RCC_AHB12_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AHB12CKG) +#define __HAL_RCC_AHB34_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AHB34CKG) +#define __HAL_RCC_FLIFT_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_FLIFTCKG) +#define __HAL_RCC_OCTOSPI2_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_OCTOSPI2CKG) +#define __HAL_RCC_FMC_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_FMCCKG) +#define __HAL_RCC_OCTOSPI1_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_OCTOSPI1CKG) +#define __HAL_RCC_AXIRAM1_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXIRAM1CKG) +#define __HAL_RCC_AXIRAM2_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXIRAM2CKG) +#define __HAL_RCC_AXIRAM3_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_AXIRAM3CKG) +#define __HAL_RCC_GFXMMUS_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_GFXMMUSCKG) +#define __HAL_RCC_ECCRAM_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_ECCRAMCKG) +#define __HAL_RCC_EXTI_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_EXTICKG) +#define __HAL_RCC_JTAG_CLKGA_DISABLE() (RCC->CKGAENR) &= ~ (RCC_CKGAENR_JTAGCKG) + +#endif /* RCC_CKGAENR_AXICKG */ + + + + +/** @brief Macro to enable or disable the Internal High Speed oscillator (HSI). + * @note After enabling the HSI, the application software should wait on + * HSIRDY flag to be set indicating that HSI clock is stable and can + * be used to clock the PLL and/or system clock. + * @note HSI can not be stopped if it is used directly or through the PLL + * as system clock. In this case, you have to select another source + * of the system clock then stop the HSI. + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * @param __STATE__ specifies the new state of the HSI. + * This parameter can be one of the following values: + * @arg RCC_HSI_OFF turn OFF the HSI oscillator + * @arg RCC_HSI_ON turn ON the HSI oscillator + * @arg RCC_HSI_DIV1 turn ON the HSI oscillator and divide it by 1 (default after reset) + * @arg RCC_HSI_DIV2 turn ON the HSI oscillator and divide it by 2 + * @arg RCC_HSI_DIV4 turn ON the HSI oscillator and divide it by 4 + * @arg RCC_HSI_DIV8 turn ON the HSI oscillator and divide it by 8 + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_CONFIG(__STATE__) \ + MODIFY_REG(RCC->CR, RCC_CR_HSION | RCC_CR_HSIDIV , (uint32_t)(__STATE__)) + + +/** @brief Macro to get the HSI divider. + * @retval The HSI divider. The returned value can be one + * of the following: + * - RCC_CR_HSIDIV_1 HSI oscillator divided by 1 (default after reset) + * - RCC_CR_HSIDIV_2 HSI oscillator divided by 2 + * - RCC_CR_HSIDIV_4 HSI oscillator divided by 4 + * - RCC_CR_HSIDIV_8 HSI oscillator divided by 8 + */ +#define __HAL_RCC_GET_HSI_DIVIDER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_HSIDIV))) + +/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). + * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after start-up + * from Reset, wakeup from STOP and STANDBY mode, or in case of failure + * of the HSE used directly or indirectly as system clock (if the Clock + * Security System CSS is enabled). + * @note HSI can not be stopped if it is used as system clock source. In this case, + * you have to select another source of the system clock then stop the HSI. + * @note After enabling the HSI, the application software should wait on HSIRDY + * flag to be set indicating that HSI clock is stable and can be used as + * system clock source. + * This parameter can be: ENABLE or DISABLE. + * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator + * clock cycles. + */ +#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION) +#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION) + + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICalibrationValue__: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x7F (3F for Rev Y device). + */ +#if defined(RCC_VER_X) +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \ + do { \ + if(HAL_GetREVID() <= REV_ID_Y) \ + { \ + if((__HSICalibrationValue__) == RCC_HSICALIBRATION_DEFAULT) \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_HSITRIM_Msk, ((uint32_t)0x20) << HAL_RCC_REV_Y_HSITRIM_Pos); \ + } \ + else \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_HSITRIM_Msk, (uint32_t)(__HSICalibrationValue__) << HAL_RCC_REV_Y_HSITRIM_Pos); \ + } \ + } \ + else \ + { \ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_HSICFGR_HSITRIM_Pos); \ + } \ + } while(0) + +#else +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_HSICFGR_HSITRIM_Pos); +#endif /*RCC_VER_X*/ +/** + * @brief Macros to enable or disable the force of the Internal High Speed oscillator (HSI) + * in STOP mode to be quickly available as kernel clock for some peripherals. + * @note Keeping the HSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the HSI start-up time. + * @note The enable of this function has not effect on the HSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_HSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSIKERON) +#define __HAL_RCC_HSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON) + + +/** + * @brief Macro to enable or disable the Internal High Speed oscillator for USB (HSI48). + * @note After enabling the HSI48, the application software should wait on + * HSI48RDY flag to be set indicating that HSI48 clock is stable and can + * be used to clock the USB. + * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSI48ON); + +#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); + +/** + * @brief Macros to enable or disable the Internal oscillator (CSI). + * @note The CSI is stopped by hardware when entering STOP and STANDBY modes. + * It is used (enabled by hardware) as system clock source after + * start-up from Reset, wakeup from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * @note CSI can not be stopped if it is used as system clock source. + * In this case, you have to select another source of the system + * clock then stop the CSI. + * @note After enabling the CSI, the application software should wait on + * CSIRDY flag to be set indicating that CSI clock is stable and can + * be used as system clock source. + * @note When the CSI is stopped, CSIRDY flag goes low after 6 CSI oscillator + * clock cycles. + */ +#define __HAL_RCC_CSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_CSION) +#define __HAL_RCC_CSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSION) + +/** @brief Macro Adjusts the Internal oscillator (CSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal CSI RC. + * @param __CSICalibrationValue__: specifies the calibration trimming value. + * This parameter must be a number between 0 and 0x1F. + */ +#if defined(RCC_VER_X) +#define __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(__CSICalibrationValue__) \ + do { \ + if(HAL_GetREVID() <= REV_ID_Y) \ + { \ + if((__CSICalibrationValue__) == RCC_CSICALIBRATION_DEFAULT) \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_CSITRIM_Msk, ((uint32_t)0x10) << HAL_RCC_REV_Y_CSITRIM_Pos); \ + } \ + else \ + { \ + MODIFY_REG(RCC->HSICFGR, HAL_RCC_REV_Y_CSITRIM_Msk, (uint32_t)(__CSICalibrationValue__) << HAL_RCC_REV_Y_CSITRIM_Pos); \ + } \ + } \ + else \ + { \ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, (uint32_t)(__CSICalibrationValue__) << RCC_CSICFGR_CSITRIM_Pos); \ + } \ + } while(0) + +#else +#define __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(__CSICalibrationValue__) \ + do { \ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, (uint32_t)(__CSICalibrationValue__) << RCC_CSICFGR_CSITRIM_Pos); \ + } while(0) + +#endif /*RCC_VER_X*/ +/** + * @brief Macros to enable or disable the force of the Low-power Internal oscillator (CSI) + * in STOP mode to be quickly available as kernel clock for USARTs and I2Cs. + * @note Keeping the CSI ON in STOP mode allows to avoid slowing down the communication + * speed because of the CSI start-up time. + * @note The enable of this function has not effect on the CSION bit. + * This parameter can be: ENABLE or DISABLE. + * @retval None + */ +#define __HAL_RCC_CSISTOP_ENABLE() SET_BIT(RCC->CR, RCC_CR_CSIKERON) +#define __HAL_RCC_CSISTOP_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON) + + +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable and can + * be used to clock the IWDG and/or the RTC. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator + * clock cycles. + */ +#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION) +#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION) + +/** + * @brief Macro to configure the External High Speed oscillator (__HSE__). + * @note After enabling the HSE (RCC_HSE_ON, RCC_HSE_BYPASS or RCC_HSE_BYPASS_DIGITAL), + * the application software should wait on HSERDY flag to be set indicating + * that HSE clock is stable and can be used to clock the PLL and/or system clock. + * @note HSE state can not be changed if it is used directly or through the + * PLL as system clock. In this case, you have to select another source + * of the system clock then change the HSE state (ex. disable it). + * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. + * @note This function reset the CSSON bit, so if the clock security system(CSS) + * was previously enabled you have to enable it again after calling this + * function. + * @param __STATE__: specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after + * 6 HSE oscillator clock cycles. + * @arg RCC_HSE_ON: turn ON the HSE oscillator. + * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. + * @arg RCC_HSE_BYPASS_DIGITAL: HSE oscillator bypassed with digital external clock. (*) + * + * (*): Only available on stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + */ +#if defined(RCC_CR_HSEEXT) +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if((__STATE__) == RCC_HSE_BYPASS_DIGITAL) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEEXT); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); \ + } \ + } while(0) +#else +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if ((__STATE__) == RCC_HSE_ON) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else if ((__STATE__) == RCC_HSE_OFF) \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + else if ((__STATE__) == RCC_HSE_BYPASS) \ + { \ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ + SET_BIT(RCC->CR, RCC_CR_HSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ + } \ + } while(0) +#endif /* RCC_CR_HSEEXT */ + +/** @defgroup RCC_LSE_Configuration LSE Configuration + * @{ + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. + * User should request a transition to LSE Off first and then LSE On or LSE Bypass. + * @note The external input clock can have a frequency up to 1 MHz and be low swing (analog) or digital(*). + A duty cycle close to 50% is recommended. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note After enabling the LSE (RCC_LSE_ON, RCC_LSE_BYPASS or RCC_LSE_BYPASS_DIGITAL*), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used to clock the RTC. + * @note If the RTC is used, the LSE bypass must not be configured in digital mode but in low swing analog mode (*) + * @param __STATE__: specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after + * 6 LSE oscillator clock cycles. + * @arg RCC_LSE_ON: turn ON the LSE oscillator. + * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. + * @arg RCC_LSE_BYPASS_DIGITAL: LSE oscillator bypassed with external digital clock. (*) + * + * (*) Available on some STM32H7 lines only. + */ +#if defined(RCC_BDCR_LSEEXT) +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS_DIGITAL) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); \ + } \ + } while(0) +#else + +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else if((__STATE__) == RCC_LSE_OFF) \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + else if((__STATE__) == RCC_LSE_BYPASS) \ + { \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + } \ + else \ + { \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ + } \ + } while(0) + +#endif /* RCC_BDCR_LSEEXT */ +/** + * @} + */ + +/** @brief Macros to enable or disable the the RTC clock. + * @note These macros must be used only after the RTC clock source was selected. + */ +#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN) +#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN) + +/** @brief Macros to configure the RTC clock (RTCCLK). + * @note As the RTC clock configuration bits are in the Backup domain and write + * access is denied to this domain after reset, you have to enable write + * access using the Power Backup Access macro before to configure + * the RTC clock source (to be done once after reset). + * @note Once the RTC clock is configured it can't be changed unless the + * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by + * a Power On Reset (POR). + * @param __RTCCLKSource__: specifies the RTC clock source. + * This parameter can be one of the following values: + * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock. + * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock. + * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected + * as RTC clock, where x:[2,31] + * @note If the LSE or LSI is used as RTC clock source, the RTC continues to + * work in STOP and STANDBY modes, and can be used as wakeup source. + * However, when the HSE clock is used as RTC clock source, the RTC + * cannot be used in STOP and STANDBY modes. + * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as + * RTC clock source). + */ +#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, (((__RTCCLKSource__) & 0xFFFFCFFU) >> 4)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) + +#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ + RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \ + } while (0) + +#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))) + + +/** @brief Macros to force or release the Backup domain reset. + * @note This function resets the RTC peripheral (including the backup registers) + * and the RTC clock source selection in RCC_BDCR register. + * @note The BKPSRAM is not affected by this reset. + */ +#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST) +#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST) + +/** @brief Macros to enable or disable the main PLL. + * @note After enabling the main PLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main PLL can not be disabled if it is used as system clock source + * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL1ON) +#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON) + +/** + * @brief Enables or disables each clock output (PLL_P_CLK, PLL_Q_CLK, PLL_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL is disabled. + * This is mainly used to save Power. + * (The ck_pll_p of the System PLL cannot be stopped if used as System Clock). + * @param __RCC_PLL1ClockOut__: specifies the PLL clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL1_DIVP: This clock is used to generate system clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL1_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL1_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLLCLKOUT_ENABLE(__RCC_PLL1ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL1ClockOut__)) + +#define __HAL_RCC_PLLCLKOUT_DISABLE(__RCC_PLL1ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL1ClockOut__)) + + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL1 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL1 + * @retval None + */ +#define __HAL_RCC_PLLFRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) + +#define __HAL_RCC_PLLFRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) + + +/** + * @brief Macro to configures the main PLL clock source, multiplication and division factors. + * @note This function must be used only when the main PLL is disabled. + * + * @param __RCC_PLLSOURCE__: specifies the PLL entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_CSI: CSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * @note This clock source (__RCC_PLLSource__) is common for the main PLL1 (main PLL) and PLL2 & PLL3 . + * + * @param __PLLM1__: specifies the division factor for PLL VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLLN1__: specifies the multiplication factor for PLL VCO output clock + * This parameter must be a number between 4 and 512 or between 8 and 420(*). + * @note You have to set the PLLN parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLLP1__: specifies the division factor for system clock. + * This parameter must be a number between 2 or 1(**) and 128 (where odd numbers are not allowed) + * + * @param __PLLQ1__: specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLLR1__: specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL1P__, __PLL1Q__ or __PLL1R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * (**): For stm32h72xxx and stm32h73xxx family lines. + */ + + +#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLM1__, __PLLN1__, __PLLP1__, __PLLQ1__,__PLLR1__ ) \ + do{ MODIFY_REG(RCC->PLLCKSELR, (RCC_PLLCKSELR_PLLSRC | RCC_PLLCKSELR_DIVM1) , ((__RCC_PLLSOURCE__) | ( (__PLLM1__) <<4U))); \ + WRITE_REG (RCC->PLL1DIVR , ( (((__PLLN1__) - 1U )& RCC_PLL1DIVR_N1) | ((((__PLLP1__) -1U ) << 9U) & RCC_PLL1DIVR_P1) | \ + ((((__PLLQ1__) -1U) << 16U)& RCC_PLL1DIVR_Q1) | ((((__PLLR1__) - 1U) << 24U)& RCC_PLL1DIVR_R1))); \ + } while(0) + + +/** @brief Macro to configure the PLLs clock source. + * @note This function must be used only when all PLLs are disabled. + * @param __PLLSOURCE__: specifies the PLLs entry clock source. + * This parameter can be one of the following values: + * @arg RCC_PLLSOURCE_CSI: CSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry + * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry + * + */ +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, (__PLLSOURCE__)) + + +/** + * @brief Macro to configures the main PLL clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL1 VCO + * + * @param __RCC_PLL1FRACN__: specifies Fractional Part Of The Multiplication Factor for PLL1 VCO + * It should be a value between 0 and 8191 + * @note Warning: The software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL1VCOSEL = 0 + * 150 to 420 MHz if PLL1VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLLFRACN_CONFIG(__RCC_PLL1FRACN__) MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1, (uint32_t)(__RCC_PLL1FRACN__) << RCC_PLL1FRACR_FRACN1_Pos) + + +/** @brief Macro to select the PLL1 reference frequency range. + * @param __RCC_PLL1VCIRange__: specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL1VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL1VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL1VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL1VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL_VCIRANGE(__RCC_PLL1VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, (__RCC_PLL1VCIRange__)) + + +/** @brief Macro to select the PLL1 reference frequency range. + * @param __RCC_PLL1VCORange__: specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL1VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL1VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL_VCORANGE(__RCC_PLL1VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, (__RCC_PLL1VCORange__)) + + + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * - RCC_CFGR_SWS_CSI: CSI used as system clock. + * - RCC_CFGR_SWS_HSI: HSI used as system clock. + * - RCC_CFGR_SWS_HSE: HSE used as system clock. + * - RCC_CFGR_SWS_PLL: PLL used as system clock. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) + + +/** + * @brief Macro to configure the system clock source. + * @param __RCC_SYSCLKSOURCE__: specifies the system clock source. + * This parameter can be one of the following values: + * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_CSI: CSI oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. + * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. + */ +#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) + +/** @brief Macro to get the oscillator used as PLL clock source. + * @retval The oscillator used as PLL clock source. The returned value can be one + * of the following: + * - RCC_PLLSOURCE_NONE: No oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_CSI: CSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. + * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. + */ +#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC)) + +/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config + * @{ + */ + +/** @brief Macro to configure the MCO1 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLL1QCLK: PLL1Q clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSI48: HSI48 (48MHZ) selected as MCO1 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO1 clock + */ +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__))) + +/** @brief Macro to configure the MCO2 clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLL2PCLK: PLL2P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLCLK: PLL1P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_CSICLK: CSI clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_LSICLK: LSI clock selected as MCO2 source + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCO2 clock + */ +#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 7))); + +/** + * @} + */ + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @note As the LSE is in the Backup domain and write access is denied to + * this domain after reset, you have to enable write access using + * HAL_PWR_EnableBkUpAccess() function before to configure the LSE + * (to be done once after reset). + * @note On STM32H7 Rev.B and above devices this can't be updated while LSE is ON. + * @param __LSEDRIVE__: specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability. + * @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability. + * @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability. + * @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability. + * @retval None + */ +#if defined(RCC_VER_X) +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + do{ \ + if((HAL_GetREVID() <= REV_ID_Y) && (((__LSEDRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || ((__LSEDRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH))) \ + { \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (~(uint32_t)(__LSEDRIVE__)) & RCC_BDCR_LSEDRV_Msk); \ + } \ + else \ + { \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)); \ + } \ + } while(0) +#else +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) \ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__LSEDRIVE__)); +#endif /*RCC_VER_X*/ +/** + * @brief Macro to configure the wake up from stop clock. + * @param __RCC_STOPWUCLK__: specifies the clock source used after wake up from stop + * This parameter can be one of the following values: + * @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI selected as system clock source + * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI selected as system clock source + * @retval None + */ +#define __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(__RCC_STOPWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, (__RCC_STOPWUCLK__)) + +/** + * @brief Macro to configure the Kernel wake up from stop clock. + * @param __RCC_STOPKERWUCLK__: specifies the Kernel clock source used after wake up from stop + * This parameter can be one of the following values: + * @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI selected as Kernel clock source + * @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI selected as Kernel clock source + * @retval None + */ +#define __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(__RCC_STOPKERWUCLK__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, (__RCC_STOPKERWUCLK__)) + +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: HSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt + * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: HSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear the RCC's interrupt pending bits + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: CSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_HSECSS: HSE Clock Security interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__)) + +/** @brief Check the RCC's interrupt has occurred or not. + * @param __INTERRUPT__: specifies the RCC interrupt source to check. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY: LSI ready interrupt + * @arg RCC_IT_LSERDY: LSE ready interrupt + * @arg RCC_IT_CSIRDY: CSI ready interrupt + * @arg RCC_IT_HSIRDY: HSI ready interrupt + * @arg RCC_IT_HSERDY: HSE ready interrupt + * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt + * @arg RCC_IT_PLLRDY: main PLL ready interrupt + * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt + * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt + * @arg RCC_IT_HSECSS: HSE Clock Security interrupt + * @arg RCC_IT_LSECSS: Clock security system interrupt + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Set RMVF bit to clear the reset flags. + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->RSR |= RCC_RSR_RMVF) + +#if defined(DUAL_CORE) +#define __HAL_RCC_C1_CLEAR_RESET_FLAGS() (RCC_C1->RSR |= RCC_RSR_RMVF) + +#define __HAL_RCC_C2_CLEAR_RESET_FLAGS() (RCC_C2->RSR |= RCC_RSR_RMVF) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** @brief Check RCC flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSIDIV: HSI divider flag + * @arg RCC_FLAG_CSIRDY: CSI oscillator clock ready + * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_D1CKRDY: Domain1 clock ready + * @arg RCC_FLAG_D2CKRDY: Domain2 clock ready + * @arg RCC_FLAG_PLLRDY: PLL1 clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_C1RST: CPU reset flag + * @arg RCC_FLAG_C2RST: CPU2 reset flag + * @arg RCC_FLAG_D1RST: D1 domain power switch reset flag + * @arg RCC_FLAG_D2RST: D2 domain power switch reset flag + * @arg RCC_FLAG_BORRST: BOR reset flag + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTR1ST: System reset from CPU reset flag + * @arg RCC_FLAG_SFTR2ST: System reset from CPU2 reset flag + * @arg RCC_FLAG_BORRST: D2 domain power switch reset flag + * @arg RCC_FLAG_IWDG1RST: CPU Independent Watchdog reset + * @arg RCC_FLAG_IWDG2RST: CPU2 Independent Watchdog reset + * @arg RCC_FLAG_WWDG2RST: Window Watchdog2 reset + * @arg RCC_FLAG_WWDG1RST: Window Watchdog1 reset + * @arg RCC_FLAG_LPWR1RST: Reset due to illegal D1 DSTANDBY or CPU CSTOP flag + * @arg RCC_FLAG_LPWR2RST: Reset due to illegal D2 DSTANDBY or CPU2 CSTOP flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define RCC_FLAG_MASK ((uint8_t)0x1F) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC->RSR :RCC->CIFR)))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +#define __HAL_RCC_C1_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC_C1->RSR :RCC->CIFR)))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +#define __HAL_RCC_C2_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC_C2->RSR :RCC->CIFR)))) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) + +#else + +/** @brief Check RCC flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready + * @arg RCC_FLAG_HSIDIV: HSI divider flag + * @arg RCC_FLAG_CSIRDY: CSI oscillator clock ready + * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready + * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready + * @arg RCC_FLAG_D1CKRDY: Domain1 clock ready (*) + * @arg RCC_FLAG_D2CKRDY: Domain2 clock ready (*) + * @arg RCC_FLAG_CPUCKRDY: CPU Domain clock ready (CPU, APB3, bus matrix1 and related memories) (*) + * @arg RCC_FLAG_CDCKRDY: CPU Domain clock ready (*) + * @arg RCC_FLAG_PLLRDY: PLL1 clock ready + * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready + * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready + * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready + * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready + * @arg RCC_FLAG_CPURST: CPU reset flag + * @arg RCC_FLAG_D1RST: D1 domain power switch reset flag (*) + * @arg RCC_FLAG_D2RST: D2 domain power switch reset flag (*) + * @arg RCC_FLAG_CDRST: CD domain power switch reset flag (*) + * @arg RCC_FLAG_BORRST: BOR reset flag + * @arg RCC_FLAG_PINRST: Pin reset + * @arg RCC_FLAG_PORRST: POR/PDR reset + * @arg RCC_FLAG_SFTRST: System reset from CPU reset flag + * @arg RCC_FLAG_BORRST: D2 domain power switch reset flag + * @arg RCC_FLAG_IWDG1RST: CPU Independent Watchdog reset + * @arg RCC_FLAG_WWDG1RST: Window Watchdog1 reset + * @arg RCC_FLAG_LPWR1RST: Reset due to illegal D1 DSTANDBY or CPU CSTOP flag + * @arg RCC_FLAG_LPWR2RST: Reset due to illegal D2 DSTANDBY flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + * + * (*) Available on some STM32H7 lines only. + */ +#define RCC_FLAG_MASK ((uint8_t)0x1F) +#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR : \ +((((__FLAG__) >> 5U) == 3U)? RCC->CSR : ((((__FLAG__) >> 5U) == 4U)? RCC->RSR :RCC->CIFR)))) & (1UL << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U) +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +#define RCC_GET_PLL_OSCSOURCE() ((RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC) >> RCC_PLLCKSELR_PLLSRC_Pos) + +/** + * @} + */ + +/* Include RCC HAL Extension module */ +#include "stm32h7xx_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +void HAL_RCC_EnableCSS(void); +void HAL_RCC_DisableCSS(void); +uint32_t HAL_RCC_GetSysClockFreq(void); +uint32_t HAL_RCC_GetHCLKFreq(void); +uint32_t HAL_RCC_GetPCLK1Freq(void); +uint32_t HAL_RCC_GetPCLK2Freq(void); +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); +/* CSS NMI IRQ handler */ +void HAL_RCC_NMI_IRQHandler(void); +/* User Callbacks in non blocking mode (IT mode) */ +void HAL_RCC_CSSCallback(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ + +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms */ +#define HSI48_TIMEOUT_VALUE (2U) /* 2 ms */ +#define CSI_TIMEOUT_VALUE (2U) /* 2 ms */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms */ +#define PLL_FRAC_TIMEOUT_VALUE (1U) /* PLL Fractional part waiting time before new latch enable : 1 ms */ +#define CLOCKSWITCH_TIMEOUT_VALUE (5000U) /* 5 s */ +#define RCC_DBP_TIMEOUT_VALUE (100U) +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)) + +#if defined(RCC_CR_HSEEXT) +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_BYPASS) || ((HSE) == RCC_HSE_BYPASS_DIGITAL)) +#else +#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ + ((HSE) == RCC_HSE_BYPASS)) +#endif /* RCC_CR_HSEEXT */ + +#if defined(RCC_BDCR_LSEEXT) +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_BYPASS) || ((LSE) == RCC_LSE_BYPASS_DIGITAL)) +#else +#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ + ((LSE) == RCC_LSE_BYPASS)) +#endif /* RCC_BDCR_LSEEXT */ + +#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON) || \ + ((HSI) == RCC_HSI_DIV1) || ((HSI) == RCC_HSI_DIV2) || \ + ((HSI) == RCC_HSI_DIV4) || ((HSI) == RCC_HSI_DIV8)) + +#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON)) + +#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) + +#define IS_RCC_CSI(CSI) (((CSI) == RCC_CSI_OFF) || ((CSI) == RCC_CSI_ON)) + +#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || \ + ((PLL) == RCC_PLL_ON)) + +#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_CSI) || \ + ((SOURCE) == RCC_PLLSOURCE_HSI) || \ + ((SOURCE) == RCC_PLLSOURCE_NONE) || \ + ((SOURCE) == RCC_PLLSOURCE_HSE)) + +#define IS_RCC_PLLRGE_VALUE(VALUE) (((VALUE) == RCC_PLL1VCIRANGE_0) || \ + ((VALUE) == RCC_PLL1VCIRANGE_1) || \ + ((VALUE) == RCC_PLL1VCIRANGE_2) || \ + ((VALUE) == RCC_PLL1VCIRANGE_3)) + +#define IS_RCC_PLLVCO_VALUE(VALUE) (((VALUE) == RCC_PLL1VCOWIDE) || ((VALUE) == RCC_PLL1VCOMEDIUM)) + +#define IS_RCC_PLLFRACN_VALUE(VALUE) ((VALUE) <= 8191U) + +#define IS_RCC_PLLM_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#if !defined(RCC_VER_2_0) +#define IS_RCC_PLLN_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#else +#define IS_RCC_PLLN_VALUE(VALUE) ((8U <= (VALUE)) && ((VALUE) <= 420U)) +#endif /* !RCC_VER_2_0 */ +#define IS_RCC_PLLP_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLLQ_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLLR_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLLCLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL1_DIVP) || \ + ((VALUE) == RCC_PLL1_DIVQ) || \ + ((VALUE) == RCC_PLL1_DIVR)) + +#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 0x3FU)) + +#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_CSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ + ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK)) + +#define IS_RCC_SYSCLK(SYSCLK) (((SYSCLK) == RCC_SYSCLK_DIV1) || ((SYSCLK) == RCC_SYSCLK_DIV2) || \ + ((SYSCLK) == RCC_SYSCLK_DIV4) || ((SYSCLK) == RCC_SYSCLK_DIV8) || \ + ((SYSCLK) == RCC_SYSCLK_DIV16) || ((SYSCLK) == RCC_SYSCLK_DIV64) || \ + ((SYSCLK) == RCC_SYSCLK_DIV128) || ((SYSCLK) == RCC_SYSCLK_DIV256) || \ + ((SYSCLK) == RCC_SYSCLK_DIV512)) + + +#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_HCLK_DIV1) || ((HCLK) == RCC_HCLK_DIV2) || \ + ((HCLK) == RCC_HCLK_DIV4) || ((HCLK) == RCC_HCLK_DIV8) || \ + ((HCLK) == RCC_HCLK_DIV16) || ((HCLK) == RCC_HCLK_DIV64) || \ + ((HCLK) == RCC_HCLK_DIV128) || ((HCLK) == RCC_HCLK_DIV256) || \ + ((HCLK) == RCC_HCLK_DIV512)) + +#define IS_RCC_CDPCLK1(CDPCLK1) (((CDPCLK1) == RCC_APB3_DIV1) || ((CDPCLK1) == RCC_APB3_DIV2) || \ + ((CDPCLK1) == RCC_APB3_DIV4) || ((CDPCLK1) == RCC_APB3_DIV8) || \ + ((CDPCLK1) == RCC_APB3_DIV16)) + +#define IS_RCC_D1PCLK1 IS_RCC_CDPCLK1 /* for legacy compatibility between H7 lines */ + +#define IS_RCC_PCLK1(PCLK1) (((PCLK1) == RCC_APB1_DIV1) || ((PCLK1) == RCC_APB1_DIV2) || \ + ((PCLK1) == RCC_APB1_DIV4) || ((PCLK1) == RCC_APB1_DIV8) || \ + ((PCLK1) == RCC_APB1_DIV16)) + +#define IS_RCC_PCLK2(PCLK2) (((PCLK2) == RCC_APB2_DIV1) || ((PCLK2) == RCC_APB2_DIV2) || \ + ((PCLK2) == RCC_APB2_DIV4) || ((PCLK2) == RCC_APB2_DIV8) || \ + ((PCLK2) == RCC_APB2_DIV16)) + +#define IS_RCC_SRDPCLK1(SRDPCLK1) (((SRDPCLK1) == RCC_APB4_DIV1) || ((SRDPCLK1) == RCC_APB4_DIV2) || \ + ((SRDPCLK1) == RCC_APB4_DIV4) || ((SRDPCLK1) == RCC_APB4_DIV8) || \ + ((SRDPCLK1) == RCC_APB4_DIV16)) + +#define IS_RCC_D3PCLK1 IS_RCC_SRDPCLK1 /* for legacy compatibility between H7 lines*/ + +#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE) || ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV33) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV34) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV35) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV36) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV37) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV38) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV39) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV40) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV41) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV42) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV43) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV44) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV45) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV46) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV47) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV48) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV49) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV50) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV51) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV52) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV53) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV54) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV55) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV56) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV57) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV58) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV59) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV60) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV61) || \ + ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV62) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV63)) + +#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) + +#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLL1QCLK) || \ + ((SOURCE) == RCC_MCO1SOURCE_HSI48)) + +#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLL2PCLK) || \ + ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK) || \ + ((SOURCE) == RCC_MCO2SOURCE_CSICLK) || ((SOURCE) == RCC_MCO2SOURCE_LSICLK)) + +#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ + ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ + ((DIV) == RCC_MCODIV_5) || ((DIV) == RCC_MCODIV_6) || \ + ((DIV) == RCC_MCODIV_7) || ((DIV) == RCC_MCODIV_8) || \ + ((DIV) == RCC_MCODIV_9) || ((DIV) == RCC_MCODIV_10) || \ + ((DIV) == RCC_MCODIV_11) || ((DIV) == RCC_MCODIV_12) || \ + ((DIV) == RCC_MCODIV_13) || ((DIV) == RCC_MCODIV_14) || \ + ((DIV) == RCC_MCODIV_15)) + +#if defined(DUAL_CORE) +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_CSIRDY) || \ + ((FLAG) == RCC_FLAG_HSI48RDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_D1CKRDY) || ((FLAG) == RCC_FLAG_D2CKRDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_PLL2RDY) || \ + ((FLAG) == RCC_FLAG_PLL3RDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || \ + ((FLAG) == RCC_FLAG_C1RST) || ((FLAG) == RCC_FLAG_C2RST) || \ + ((FLAG) == RCC_FLAG_SFTR2ST) || ((FLAG) == RCC_FLAG_WWDG2RST)|| \ + ((FLAG) == RCC_FLAG_IWDG2RST) || ((FLAG) == RCC_FLAG_D1RST) || \ + ((FLAG) == RCC_FLAG_D2RST) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTR1ST) || ((FLAG) == RCC_FLAG_IWDG1RST)|| \ + ((FLAG) == RCC_FLAG_WWDG1RST) || ((FLAG) == RCC_FLAG_LPWR1RST)|| \ + ((FLAG) == RCC_FLAG_LPWR2RST) || ((FLAG) == RCC_FLAG_HSIDIV)) + +#else + +#if defined(RCC_CR_D2CKRDY) +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_CSIRDY) || \ + ((FLAG) == RCC_FLAG_HSI48RDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_D1CKRDY) || ((FLAG) == RCC_FLAG_D2CKRDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_PLL2RDY) || \ + ((FLAG) == RCC_FLAG_PLL3RDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || \ + ((FLAG) == RCC_FLAG_CPURST) || ((FLAG) == RCC_FLAG_D1RST) || \ + ((FLAG) == RCC_FLAG_D2RST) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDG1RST)|| \ + ((FLAG) == RCC_FLAG_WWDG1RST) || ((FLAG) == RCC_FLAG_LPWR1RST)|| \ + ((FLAG) == RCC_FLAG_LPWR2RST) || ((FLAG) == RCC_FLAG_HSIDIV )) +#else +#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_CSIRDY) || \ + ((FLAG) == RCC_FLAG_HSI48RDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ + ((FLAG) == RCC_FLAG_CPUCKRDY) || ((FLAG) == RCC_FLAG_CDCKRDY) || \ + ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_PLL2RDY) || \ + ((FLAG) == RCC_FLAG_PLL3RDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ + ((FLAG) == RCC_FLAG_LSIRDY) || \ + ((FLAG) == RCC_FLAG_CDRST) || ((FLAG) == RCC_FLAG_BORRST) || \ + ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \ + ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDG1RST)|| \ + ((FLAG) == RCC_FLAG_WWDG1RST) || ((FLAG) == RCC_FLAG_LPWR1RST)|| \ + ((FLAG) == RCC_FLAG_LPWR2RST) || ((FLAG) == RCC_FLAG_HSIDIV )) +#endif /* RCC_CR_D2CKRDY */ + +#endif /*DUAL_CORE*/ + +#define IS_RCC_HSICALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7FU) +#define IS_RCC_CSICALIBRATION_VALUE(VALUE) ((VALUE) <= 0x3FU) + +#define IS_RCC_STOP_WAKEUPCLOCK(SOURCE) (((SOURCE) == RCC_STOP_WAKEUPCLOCK_CSI) || \ + ((SOURCE) == RCC_STOP_WAKEUPCLOCK_HSI)) + +#define IS_RCC_STOP_KERWAKEUPCLOCK(SOURCE) (((SOURCE) == RCC_STOP_KERWAKEUPCLOCK_CSI) || \ + ((SOURCE) == RCC_STOP_KERWAKEUPCLOCK_HSI)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_RCC_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h new file mode 100644 index 0000000..2fb1fd2 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h @@ -0,0 +1,4482 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extension module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_RCC_EX_H +#define STM32H7xx_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief PLL2 Clock structure definition + */ +typedef struct +{ + + uint32_t PLL2M; /*!< PLL2M: Division factor for PLL2 VCO input clock. + This parameter must be a number between Min_Data = 1 and Max_Data = 63 */ + + uint32_t PLL2N; /*!< PLL2N: Multiplication factor for PLL2 VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + or between Min_Data = 8 and Max_Data = 420(*) + (*) : For stm32h7a3xx and stm32h7b3xx family lines. */ + + uint32_t PLL2P; /*!< PLL2P: Division factor for system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed */ + + uint32_t PLL2Q; /*!< PLL2Q: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + + uint32_t PLL2R; /*!< PLL2R: Division factor for peripheral clocks. + This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ + uint32_t PLL2RGE; /*!CR, RCC_CR_PLL2ON) +#define __HAL_RCC_PLL2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON) + +/** + * @brief Enables or disables each clock output (PLL2_P_CLK, PLL2_Q_CLK, PLL2_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL2 is disabled, + * This is mainly used to save Power. + * @param __RCC_PLL2ClockOut__ Specifies the PLL2 clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL2_DIVP: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL2_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL2_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2CLKOUT_ENABLE(__RCC_PLL2ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL2ClockOut__)) + +#define __HAL_RCC_PLL2CLKOUT_DISABLE(__RCC_PLL2ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL2ClockOut__)) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL2 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL2 + * @retval None + */ +#define __HAL_RCC_PLL2FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +#define __HAL_RCC_PLL2FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) + +/** + * @brief Macro to configures the PLL2 multiplication and division factors. + * @note This function must be used only when PLL2 is disabled. + * + * @param __PLL2M__ specifies the division factor for PLL2 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL2N__ specifies the multiplication factor for PLL2 VCO output clock + * This parameter must be a number between 4 and 512 or between 8 and 420(*). + * @note You have to set the PLL2N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL2P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @param __PLL2R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128. + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL2P__, __PLL2Q__ or __PLL2R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + */ + +#define __HAL_RCC_PLL2_CONFIG(__PLL2M__, __PLL2N__, __PLL2P__, __PLL2Q__,__PLL2R__ ) \ + do{ \ + MODIFY_REG(RCC->PLLCKSELR, ( RCC_PLLCKSELR_DIVM2) , ( (__PLL2M__) <<12U)); \ + WRITE_REG (RCC->PLL2DIVR , ( (((__PLL2N__) - 1U ) & RCC_PLL2DIVR_N2) | ((((__PLL2P__) -1U ) << 9U) & RCC_PLL2DIVR_P2) | \ + ((((__PLL2Q__) -1U) << 16U) & RCC_PLL2DIVR_Q2) | ((((__PLL2R__)- 1U) << 24U) & RCC_PLL2DIVR_R2))); \ + } while(0) + +/** + * @brief Macro to configures PLL2 clock Fractional Part Of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL2 VCO + * + * @param __RCC_PLL2FRACN__ Specifies Fractional Part Of The Multiplication factor for PLL2 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL2VCOSEL = 0 + * 150 to 420 MHz if PLL2VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2FRACN_CONFIG(__RCC_PLL2FRACN__) \ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2,((uint32_t)(__RCC_PLL2FRACN__) << RCC_PLL2FRACR_FRACN2_Pos)) + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __RCC_PLL2VCIRange__ specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL2VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL2VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL2VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL2VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL2_VCIRANGE(__RCC_PLL2VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, (__RCC_PLL2VCIRange__)) + + +/** @brief Macro to select the PLL2 reference frequency range. + * @param __RCC_PLL2VCORange__ Specifies the PLL2 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL2VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL2VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL2_VCORANGE(__RCC_PLL2VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, (__RCC_PLL2VCORange__)) + +/** @brief Macros to enable or disable the main PLL3. + * @note After enabling PLL3, the application software should wait on + * PLL3RDY flag to be set indicating that PLL3 clock is stable and can + * be used as kernel clock source. + * @note PLL3 is disabled by hardware when entering STOP and STANDBY modes. + */ +#define __HAL_RCC_PLL3_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLL3ON) +#define __HAL_RCC_PLL3_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON) + +/** + * @brief Enables or disables Fractional Part Of The Multiplication Factor of PLL3 VCO + * @note Enabling/disabling Fractional Part can be any time without the need to stop the PLL3 + * @retval None + */ +#define __HAL_RCC_PLL3FRACN_ENABLE() SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +#define __HAL_RCC_PLL3FRACN_DISABLE() CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) + +/** + * @brief Enables or disables each clock output (PLL3_P_CLK, PLL3_Q_CLK, PLL3_R_CLK) + * @note Enabling/disabling those Clocks can be done only when the PLL3 is disabled, + * This is mainly used to save Power. + * @param __RCC_PLL3ClockOut__ specifies the PLL3 clock to be outputted + * This parameter can be one of the following values: + * @arg RCC_PLL3_DIVP: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL3_DIVQ: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * @arg RCC_PLL3_DIVR: This clock is used to generate peripherals clock up to 550MHZ(*), 480MHZ(**) or 280MHZ(***) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines and requires to enable the CPU_FREQ_BOOST flash option byte, 520MHZ otherwise. + * (**) : For stm32h74xx and stm32h75xx family lines and requires the board to be connected on LDO regulator not SMPS, 400MHZ otherwise. + * (***): For stm32h7a3xx, stm32h7b3xx and stm32h7b0xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3CLKOUT_ENABLE(__RCC_PLL3ClockOut__) SET_BIT(RCC->PLLCFGR, (__RCC_PLL3ClockOut__)) + +#define __HAL_RCC_PLL3CLKOUT_DISABLE(__RCC_PLL3ClockOut__) CLEAR_BIT(RCC->PLLCFGR, (__RCC_PLL3ClockOut__)) + +/** + * @brief Macro to configures the PLL3 multiplication and division factors. + * @note This function must be used only when PLL3 is disabled. + * + * @param __PLL3M__ specifies the division factor for PLL3 VCO input clock + * This parameter must be a number between 1 and 63. + * @note You have to set the PLLM parameter correctly to ensure that the VCO input + * frequency ranges from 1 to 16 MHz. + * + * @param __PLL3N__ specifies the multiplication factor for PLL3 VCO output clock + * This parameter must be a number between 4 and 512. + * @note You have to set the PLL3N parameter correctly to ensure that the VCO + * output frequency is between 150 and 420 MHz (when in medium VCO range) or + * between 192 and 836 MHZ or between 128 and 560 MHZ(*) (when in wide VCO range) + * + * @param __PLL3P__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 2 and 128 (where odd numbers not allowed) + * + * @param __PLL3Q__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @param __PLL3R__ specifies the division factor for peripheral kernel clocks + * This parameter must be a number between 1 and 128 + * + * @note To insure an optimal behavior of the PLL when one of the post-divider (DIVP, DIVQ or DIVR) + * is not used, application shall clear the enable bit (DIVyEN) and assign lowest possible + * value to __PLL3P__, __PLL3Q__ or __PLL3R__ parameters. + * @retval None + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + */ + +#define __HAL_RCC_PLL3_CONFIG(__PLL3M__, __PLL3N__, __PLL3P__, __PLL3Q__,__PLL3R__ ) \ + do{ MODIFY_REG(RCC->PLLCKSELR, ( RCC_PLLCKSELR_DIVM3) , ( (__PLL3M__) <<20U)); \ + WRITE_REG (RCC->PLL3DIVR , ( (((__PLL3N__) - 1U ) & RCC_PLL3DIVR_N3) | ((((__PLL3P__) -1U ) << 9U) & RCC_PLL3DIVR_P3) | \ + ((((__PLL3Q__) -1U) << 16U) & RCC_PLL3DIVR_Q3) | ((((__PLL3R__) - 1U) << 24U) & RCC_PLL3DIVR_R3))); \ + } while(0) + + + +/** + * @brief Macro to configures PLL3 clock Fractional Part of The Multiplication Factor + * + * @note These bits can be written at any time, allowing dynamic fine-tuning of the PLL3 VCO + * + * @param __RCC_PLL3FRACN__ specifies Fractional Part Of The Multiplication Factor for PLL3 VCO + * It should be a value between 0 and 8191 + * @note Warning: the software has to set correctly these bits to insure that the VCO + * output frequency is between its valid frequency range, which is: + * 192 to 836 MHz or 128 to 560 MHz(*) if PLL3VCOSEL = 0 + * 150 to 420 MHz if PLL3VCOSEL = 1. + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3FRACN_CONFIG(__RCC_PLL3FRACN__) MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3, (uint32_t)(__RCC_PLL3FRACN__) << RCC_PLL3FRACR_FRACN3_Pos) + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __RCC_PLL3VCIRange__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL3VCIRANGE_0: Range frequency is between 1 and 2 MHz + * @arg RCC_PLL3VCIRANGE_1: Range frequency is between 2 and 4 MHz + * @arg RCC_PLL3VCIRANGE_2: Range frequency is between 4 and 8 MHz + * @arg RCC_PLL3VCIRANGE_3: Range frequency is between 8 and 16 MHz + * @retval None + */ +#define __HAL_RCC_PLL3_VCIRANGE(__RCC_PLL3VCIRange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, (__RCC_PLL3VCIRange__)) + + +/** @brief Macro to select the PLL3 reference frequency range. + * @param __RCC_PLL3VCORange__ specifies the PLL1 input frequency range + * This parameter can be one of the following values: + * @arg RCC_PLL3VCOWIDE: Range frequency is between 192 and 836 MHz or between 128 to 560 MHz(*) + * @arg RCC_PLL3VCOMEDIUM: Range frequency is between 150 and 420 MHz + * + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * + * @retval None + */ +#define __HAL_RCC_PLL3_VCORANGE(__RCC_PLL3VCORange__) \ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, (__RCC_PLL3VCORange__)) +/** + * @brief Macro to Configure the SAI1 clock source. + * @param __RCC_SAI1CLKSource__ defines the SAI1 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL: SAI1 clock = PLL + * @arg RCC_SAI1CLKSOURCE_PLL2: SAI1 clock = PLL2 + * @arg RCC_SAI1CLKSOURCE_PLL3: SAI1 clock = PLL3 + * @arg RCC_SAI1CLKSOURCE_OSC: SAI1 clock = OSC + * @arg RCC_SAI1CLKSOURCE_PIN: SAI1 clock = External Clock + * @retval None + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define __HAL_RCC_SAI1_CONFIG(__RCC_SAI1CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI1SEL, (__RCC_SAI1CLKSource__)) +#else +#define __HAL_RCC_SAI1_CONFIG(__RCC_SAI1CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI1SEL, (__RCC_SAI1CLKSource__)) +#endif /* RCC_D2CCIP1R_SAI1SEL */ + +/** @brief Macro to get the SAI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI1CLKSOURCE_PLL: SAI1 clock = PLL + * @arg RCC_SAI1CLKSOURCE_PLL2: SAI1 clock = PLL2 + * @arg RCC_SAI1CLKSOURCE_PLL3: SAI1 clock = PLL3 + * @arg RCC_SAI1CLKSOURCE_CLKP: SAI1 clock = CLKP + * @arg RCC_SAI1CLKSOURCE_PIN: SAI1 clock = External Clock + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI1SEL))) +#else +#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI1SEL))) +#endif /* RCC_D2CCIP1R_SAI1SEL */ + +/** + * @brief Macro to Configure the SPDIFRX clock source. + * @param __RCC_SPDIFCLKSource__ defines the SPDIFRX clock source. This clock is derived + * from system PLL, PLL2, PLL3, or internal OSC clock + * This parameter can be one of the following values: + * @arg RCC_SPDIFRXCLKSOURCE_PLL: SPDIFRX clock = PLL + * @arg RCC_SPDIFRXCLKSOURCE_PLL2: SPDIFRX clock = PLL2 + * @arg RCC_SPDIFRXCLKSOURCE_PLL3: SPDIFRX clock = PLL3 + * @arg RCC_SPDIFRXCLKSOURCE_HSI: SPDIFRX clock = HSI + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define __HAL_RCC_SPDIFRX_CONFIG(__RCC_SPDIFCLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL, (__RCC_SPDIFCLKSource__)) +#else +#define __HAL_RCC_SPDIFRX_CONFIG(__RCC_SPDIFCLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL, (__RCC_SPDIFCLKSource__)) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ + +/** + * @brief Macro to get the SPDIFRX clock source. + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL))) +#else +#define __HAL_RCC_GET_SPDIFRX_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL))) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ + +#if defined(SAI3) +/** + * @brief Macro to Configure the SAI2/3 clock source. + * @param __RCC_SAI23CLKSource__ defines the SAI2/3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI23CLKSOURCE_PLL: SAI2/3 clock = PLL + * @arg RCC_SAI23CLKSOURCE_PLL2: SAI2/3 clock = PLL2 + * @arg RCC_SAI23CLKSOURCE_PLL3: SAI2/3 clock = PLL3 + * @arg RCC_SAI23CLKSOURCE_CLKP: SAI2/3 clock = CLKP + * @arg RCC_SAI23CLKSOURCE_PIN: SAI2/3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI23_CONFIG(__RCC_SAI23CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI23SEL, (__RCC_SAI23CLKSource__)) + +/** @brief Macro to get the SAI2/3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI23CLKSOURCE_PLL: SAI2/3 clock = PLL + * @arg RCC_SAI23CLKSOURCE_PLL2: SAI2/3 clock = PLL2 + * @arg RCC_SAI23CLKSOURCE_PLL3: SAI2/3 clock = PLL3 + * @arg RCC_SAI23CLKSOURCE_CLKP: SAI2/3 clock = CLKP + * @arg RCC_SAI23CLKSOURCE_PIN: SAI2/3 clock = External Clock + */ +#define __HAL_RCC_GET_SAI23_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SAI23SEL))) + +/** + * @brief Macro to Configure the SAI2 clock source. + * @param __RCC_SAI2CLKSource__ defines the SAI2 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2 clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2 clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2 clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2 clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI2_CONFIG __HAL_RCC_SAI23_CONFIG + +/** @brief Macro to get the SAI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2 clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2 clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2 clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2 clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2 clock = External Clock + */ +#define __HAL_RCC_GET_SAI2_SOURCE __HAL_RCC_GET_SAI23_SOURCE + +/** + * @brief Macro to Configure the SAI3 clock source. + * @param __RCC_SAI3CLKSource__ defines the SAI3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI3CLKSOURCE_PLL: SAI3 clock = PLL + * @arg RCC_SAI3CLKSOURCE_PLL2: SAI3 clock = PLL2 + * @arg RCC_SAI3CLKSOURCE_PLL3: SAI3 clock = PLL3 + * @arg RCC_SAI3CLKSOURCE_CLKP: SAI3 clock = CLKP + * @arg RCC_SAI3CLKSOURCE_PIN: SAI3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI3_CONFIG __HAL_RCC_SAI23_CONFIG + +/** @brief Macro to get the SAI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI3CLKSOURCE_PLL: SAI3 clock = PLL + * @arg RCC_SAI3CLKSOURCE_PLL2: SAI3 clock = PLL2 + * @arg RCC_SAI3CLKSOURCE_PLL3: SAI3 clock = PLL3 + * @arg RCC_SAI3CLKSOURCE_CLKP: SAI3 clock = CLKP + * @arg RCC_SAI3CLKSOURCE_PIN: SAI3 clock = External Clock + */ +#define __HAL_RCC_GET_SAI3_SOURCE __HAL_RCC_GET_SAI23_SOURCE +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) +/** + * @brief Macro to Configure the SAI2A clock source. + * @param __RCC_SAI2ACLKSource__ defines the SAI2A clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2ACLKSOURCE_PLL: SAI2A clock = PLL + * @arg RCC_SAI2ACLKSOURCE_PLL2: SAI2A clock = PLL2 + * @arg RCC_SAI2ACLKSOURCE_PLL3: SAI2A clock = PLL3 + * @arg RCC_SAI2ACLKSOURCE_CLKP: SAI2A clock = CLKP + * @arg RCC_SAI2ACLKSOURCE_PIN: SAI2A clock = External Clock + * @arg RCC_SAI2ACLKSOURCE_SPDIF: SAI2A clock = SPDIF Clock + * @retval None + */ +#define __HAL_RCC_SAI2A_CONFIG(__RCC_SAI2ACLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2ASEL, (__RCC_SAI2ACLKSource__)) + +/** @brief Macro to get the SAI2A clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2CLKSOURCE_PLL: SAI2A clock = PLL + * @arg RCC_SAI2CLKSOURCE_PLL2: SAI2A clock = PLL2 + * @arg RCC_SAI2CLKSOURCE_PLL3: SAI2A clock = PLL3 + * @arg RCC_SAI2CLKSOURCE_CLKP: SAI2A clock = CLKP + * @arg RCC_SAI2CLKSOURCE_PIN: SAI2A clock = External Clock + * @arg RCC_SAI2ACLKSOURCE_SPDIF: SAI2A clock = SPDIF Clock + */ +#define __HAL_RCC_GET_SAI2A_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2ASEL))) +#endif /* defined(RCC_CDCCIP1R_SAI2ASEL) */ + +#if defined(RCC_CDCCIP1R_SAI2BSEL) +/** + * @brief Macro to Configure the SAI2B clock source. + * @param __RCC_SAI2BCLKSource__ defines the SAI2B clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI2BCLKSOURCE_PLL: SAI2B clock = PLL + * @arg RCC_SAI2BCLKSOURCE_PLL2: SAI2B clock = PLL2 + * @arg RCC_SAI2BCLKSOURCE_PLL3: SAI2B clock = PLL3 + * @arg RCC_SAI2BCLKSOURCE_CLKP: SAI2B clock = CLKP + * @arg RCC_SAI2BCLKSOURCE_PIN: SAI2B clock = External Clock + * @arg RCC_SAI2BCLKSOURCE_SPDIF: SAI2B clock = SPDIF Clock + * @retval None + */ +#define __HAL_RCC_SAI2B_CONFIG(__RCC_SAI2BCLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2BSEL, (__RCC_SAI2BCLKSource__)) + +/** @brief Macro to get the SAI2B clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI2BCLKSOURCE_PLL: SAI2B clock = PLL + * @arg RCC_SAI2BCLKSOURCE_PLL2: SAI2B clock = PLL2 + * @arg RCC_SAI2BCLKSOURCE_PLL3: SAI2B clock = PLL3 + * @arg RCC_SAI2BCLKSOURCE_CLKP: SAI2B clock = CLKP + * @arg RCC_SAI2BCLKSOURCE_PIN: SAI2B clock = External Clock + * @arg RCC_SAI2BCLKSOURCE_SPDIF: SAI2B clock = SPDIF Clock + */ +#define __HAL_RCC_GET_SAI2B_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SAI2BSEL))) +#endif /* defined(RCC_CDCCIP1R_SAI2BSEL) */ + + +#if defined(SAI4_Block_A) +/** + * @brief Macro to Configure the SAI4A clock source. + * @param __RCC_SAI4ACLKSource__ defines the SAI4A clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI4ACLKSOURCE_PLL: SAI4A clock = PLL + * @arg RCC_SAI4ACLKSOURCE_PLL2: SAI4A clock = PLL2 + * @arg RCC_SAI4ACLKSOURCE_PLL3: SAI4A clock = PLL3 + * @arg RCC_SAI4ACLKSOURCE_CLKP: SAI4A clock = CLKP + * @arg RCC_SAI4ACLKSOURCE_PIN: SAI4A clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI4A_CONFIG(__RCC_SAI4ACLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SAI4ASEL, (__RCC_SAI4ACLKSource__)) + +/** @brief Macro to get the SAI4A clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI4ACLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4ACLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4ACLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4ACLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4ACLKSOURCE_PIN: SAI4B clock = External Clock + */ +#define __HAL_RCC_GET_SAI4A_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SAI4ASEL))) +#endif /* SAI4_Block_A */ + +#if defined(SAI4_Block_B) +/** + * @brief Macro to Configure the SAI4B clock source. + * @param __RCC_SAI4BCLKSource__ defines the SAI4B clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SAI4BCLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4BCLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4BCLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4BCLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4BCLKSOURCE_PIN: SAI4B clock = External Clock + * @retval None + */ +#define __HAL_RCC_SAI4B_CONFIG(__RCC_SAI4BCLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SAI4BSEL, (__RCC_SAI4BCLKSource__)) + +/** @brief Macro to get the SAI4B clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SAI4BCLKSOURCE_PLL: SAI4B clock = PLL + * @arg RCC_SAI4BCLKSOURCE_PLL2: SAI4B clock = PLL2 + * @arg RCC_SAI4BCLKSOURCE_PLL3: SAI4B clock = PLL3 + * @arg RCC_SAI4BCLKSOURCE_CLKP: SAI4B clock = CLKP + * @arg RCC_SAI4BCLKSOURCE_PIN: SAI4B clock = External Clock + */ +#define __HAL_RCC_GET_SAI4B_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SAI4BSEL))) +#endif /* SAI4_Block_B */ + +/** @brief macro to configure the I2C1/2/3/5* clock (I2C123CLK). + * + * @param __I2C1235CLKSource__ specifies the I2C1/2/3/5* clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C123CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_PLL3: PLL3 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_HSI: HSI selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_CSI: CSI selected as I2C1/2/3/5* clock + * + * (**): Available on stm32h72xxx and stm32h73xxx family lines. + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define __HAL_RCC_I2C123_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C123SEL, (uint32_t)(__I2C1235CLKSource__)) +#elif defined(RCC_CDCCIP2R_I2C123SEL) +#define __HAL_RCC_I2C123_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_I2C123SEL, (uint32_t)(__I2C1235CLKSource__)) +#else /* RCC_D2CCIP2R_I2C1235SEL */ +#define __HAL_RCC_I2C1235_CONFIG(__I2C1235CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C1235SEL, (uint32_t)(__I2C1235CLKSource__)) +/* alias */ +#define __HAL_RCC_I2C123_CONFIG __HAL_RCC_I2C1235_CONFIG +#endif /* RCC_D2CCIP2R_I2C123SEL */ + +/** @brief macro to get the I2C1/2/3/5* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C123CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_PLL3: PLL3 selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_HSI: HSI selected as I2C1/2/3/5* clock + * @arg RCC_I2C123CLKSOURCE_CSI: CSI selected as I2C1/2/3/5* clock + * + * (**): Available on stm32h72xxx and stm32h73xxx family lines. + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define __HAL_RCC_GET_I2C123_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C123SEL))) +#elif defined(RCC_CDCCIP2R_I2C123SEL) +#define __HAL_RCC_GET_I2C123_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_I2C123SEL))) +#else /* RCC_D2CCIP2R_I2C1235SEL */ +#define __HAL_RCC_GET_I2C1235_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_I2C1235SEL))) +/* alias */ +#define __HAL_RCC_GET_I2C123_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#endif /* RCC_D2CCIP2R_I2C123SEL */ + +/** @brief macro to configure the I2C1 clock (I2C1CLK). + * + * @param __I2C1CLKSource__ specifies the I2C1 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C1CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_PLL3: PLL3 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_CSI: CSI selected as I2C1 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C1_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C1_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C1CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_PLL3: PLL3 selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock + * @arg RCC_I2C1CLKSOURCE_CSI: CSI selected as I2C1 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C1_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C1_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C2 clock (I2C2CLK). + * + * @param __I2C2CLKSource__ specifies the I2C2 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C2CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_PLL3: PLL3 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_CSI: CSI selected as I2C2 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C2_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C2_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C2CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_PLL3: PLL3 selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock + * @arg RCC_I2C2CLKSOURCE_CSI: CSI selected as I2C2 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C2_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C2_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C3 clock (I2C3CLK). + * + * @param __I2C3CLKSource__ specifies the I2C3 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C3CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_PLL3: PLL3 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_CSI: CSI selected as I2C3 clock + */ +#if defined(I2C5) +#define __HAL_RCC_I2C3_CONFIG __HAL_RCC_I2C1235_CONFIG +#else +#define __HAL_RCC_I2C3_CONFIG __HAL_RCC_I2C123_CONFIG +#endif /*I2C5*/ + +/** @brief macro to get the I2C3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C3CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_PLL3: PLL3 selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock + * @arg RCC_I2C3CLKSOURCE_CSI: CSI selected as I2C3 clock + */ +#if defined(I2C5) +#define __HAL_RCC_GET_I2C3_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#else +#define __HAL_RCC_GET_I2C3_SOURCE __HAL_RCC_GET_I2C123_SOURCE +#endif /*I2C5*/ + +/** @brief macro to configure the I2C4 clock (I2C4CLK). + * + * @param __I2C4CLKSource__ specifies the I2C4 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C4CLKSOURCE_D3PCLK1: D3PCLK1 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_PLL3: PLL3 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_CSI: CSI selected as I2C4 clock + */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define __HAL_RCC_I2C4_CONFIG(__I2C4CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_I2C4SEL, (uint32_t)(__I2C4CLKSource__)) +#else +#define __HAL_RCC_I2C4_CONFIG(__I2C4CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_I2C4SEL, (uint32_t)(__I2C4CLKSource__)) +#endif /* RCC_D3CCIPR_I2C4SEL */ + +/** @brief macro to get the I2C4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C4CLKSOURCE_D3PCLK1: D3PCLK1 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_PLL3: PLL3 selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock + * @arg RCC_I2C4CLKSOURCE_CSI: CSI selected as I2C4 clock + */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_I2C4SEL))) +#else +#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_I2C4SEL))) +#endif /* RCC_D3CCIPR_I2C4SEL */ + +#if defined(I2C5) +/** @brief macro to configure the I2C5 clock (I2C5CLK). + * + * @param __I2C5CLKSource__ specifies the I2C5 clock source. + * This parameter can be one of the following values: + * @arg RCC_I2C5CLKSOURCE_D2PCLK1: D2PCLK1 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_PLL3: PLL3 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_HSI: HSI selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_CSI: CSI selected as I2C5 clock + */ +#define __HAL_RCC_I2C5_CONFIG __HAL_RCC_I2C1235_CONFIG +#endif /* I2C5 */ + +#if defined(I2C5) +/** @brief macro to get the I2C5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_I2C5CLKSOURCE_D2PCLK1: D2PCLK5 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_PLL3: PLL3 selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_HSI: HSI selected as I2C5 clock + * @arg RCC_I2C5CLKSOURCE_CSI: CSI selected as I2C5 clock + */ +#define __HAL_RCC_GET_I2C5_SOURCE __HAL_RCC_GET_I2C1235_SOURCE +#endif /* I2C5 */ + +/** @brief macro to configure the USART1/6/9* /10* clock (USART16CLK). + * + * @param __USART16910CLKSource__ specifies the USART1/6/9* /10* clock source. + * This parameter can be one of the following values: + * @arg RCC_USART16CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_HSI: HSI selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_CSI: CSI Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_LSE: LSE selected as USART1/6/9* /10* clock + * + * (*) : Available on some STM32H7 lines only. + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define __HAL_RCC_USART16_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16SEL, (uint32_t)(__USART16910CLKSource__)) +#elif defined(RCC_CDCCIP2R_USART16910SEL) +#define __HAL_RCC_USART16910_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USART16910SEL, (uint32_t)(__USART16910CLKSource__)) +/* alias */ +#define __HAL_RCC_USART16_CONFIG __HAL_RCC_USART16910_CONFIG +#else /* RCC_D2CCIP2R_USART16910SEL */ +#define __HAL_RCC_USART16910_CONFIG(__USART16910CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16910SEL, (uint32_t)(__USART16910CLKSource__)) +/* alias */ +#define __HAL_RCC_USART16_CONFIG __HAL_RCC_USART16910_CONFIG +#endif /* RCC_D2CCIP2R_USART16SEL */ + +/** @brief macro to get the USART1/6/9* /10* clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART16CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_HSI: HSI selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_CSI: CSI Clock selected as USART1/6/9* /10* clock + * @arg RCC_USART16CLKSOURCE_LSE: LSE selected as USART1/6/9* /10* clock + * + * (*) : Available on some STM32H7 lines only. + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define __HAL_RCC_GET_USART16_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16SEL))) +#elif defined(RCC_CDCCIP2R_USART16910SEL) +#define __HAL_RCC_GET_USART16910_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USART16910SEL))) +/* alias*/ +#define __HAL_RCC_GET_USART16_SOURCE __HAL_RCC_GET_USART16910_SOURCE +#else /* RCC_D2CCIP2R_USART16910SEL */ +#define __HAL_RCC_GET_USART16910_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART16910SEL))) +/* alias */ +#define __HAL_RCC_GET_USART16_SOURCE __HAL_RCC_GET_USART16910_SOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ + +/** @brief macro to configure the USART234578 clock (USART234578CLK). + * + * @param __USART234578CLKSource__ specifies the USART2/3/4/5/7/8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_HSI: HSI selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_CSI: CSI Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_LSE: LSE selected as USART2/3/4/5/7/8 clock + */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define __HAL_RCC_USART234578_CONFIG(__USART234578CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USART28SEL, (uint32_t)(__USART234578CLKSource__)) +#else +#define __HAL_RCC_USART234578_CONFIG(__USART234578CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USART234578SEL, (uint32_t)(__USART234578CLKSource__)) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +/** @brief macro to get the USART2/3/4/5/7/8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART234578CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_HSI: HSI selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_CSI: CSI Clock selected as USART2/3/4/5/7/8 clock + * @arg RCC_USART234578CLKSOURCE_LSE: LSE selected as USART2/3/4/5/7/8 clock + */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USART28SEL))) +#else +#define __HAL_RCC_GET_USART234578_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USART234578SEL))) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +/** @brief macro to configure the USART1 clock (USART1CLK). + * + * @param __USART1CLKSource__ specifies the USART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART1CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI: CSI Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock + */ +#define __HAL_RCC_USART1_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART1CLKSOURCE_D2PCLK2: APB2 Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL2: PLL2_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_PLL3: PLL3_Q Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_CSI: CSI Clock selected as USART1 clock + * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock + */ +#define __HAL_RCC_GET_USART1_SOURCE __HAL_RCC_GET_USART16_SOURCE + +/** @brief macro to configure the USART2 clock (USART2CLK). + * + * @param __USART2CLKSource__ specifies the USART2 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_CSI: CSI Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock + */ +#define __HAL_RCC_USART2_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the USART2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL2: PLL2_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_PLL3: PLL3_Q Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_CSI: CSI Clock selected as USART2 clock + * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock + */ +#define __HAL_RCC_GET_USART2_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the USART3 clock (USART3CLK). + * + * @param __USART3CLKSource__ specifies the USART3 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART3CLKSOURCE_D2PCLK1: APB1 Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL2: PLL2_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL3: PLL3_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_CSI: CSI Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock + */ +#define __HAL_RCC_USART3_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the USART3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART2CLKSOURCE_D2PCLK1: APB1 Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL2: PLL2_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_PLL3: PLL3_Q Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_CSI: CSI Clock selected as USART3 clock + * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock + */ +#define __HAL_RCC_GET_USART3_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART4 clock (UART4CLK). + * + * @param __UART4CLKSource__ specifies the UART4 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART4CLKSOURCE_D2PCLK1: APB1 Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL2: PLL2_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL3: PLL3_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_CSI: CSI Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock + */ +#define __HAL_RCC_UART4_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART4CLKSOURCE_D2PCLK1: APB1 Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL2: PLL2_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_PLL3: PLL3_Q Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_CSI: CSI Clock selected as UART4 clock + * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock + */ +#define __HAL_RCC_GET_UART4_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART5 clock (UART5CLK). + * + * @param __UART5CLKSource__ specifies the UART5 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART5CLKSOURCE_D2PCLK1: APB1 Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL2: PLL2_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL3: PLL3_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_CSI: CSI Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock + */ +#define __HAL_RCC_UART5_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART5CLKSOURCE_D2PCLK1: APB1 Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL2: PLL2_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_PLL3: PLL3_Q Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_CSI: CSI Clock selected as UART5 clock + * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock + */ +#define __HAL_RCC_GET_UART5_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the USART6 clock (USART6CLK). + * + * @param __USART6CLKSource__ specifies the USART6 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART6CLKSOURCE_D2PCLK2: APB2 Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL2: PLL2_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL3: PLL3_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_CSI: CSI Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock + */ +#define __HAL_RCC_USART6_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART6CLKSOURCE_D2PCLK2: APB2 Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL2: PLL2_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_PLL3: PLL3_Q Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_CSI: CSI Clock selected as USART6 clock + * @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock + */ +#define __HAL_RCC_GET_USART6_SOURCE __HAL_RCC_GET_USART16_SOURCE + +/** @brief macro to configure the UART5 clock (UART7CLK). + * + * @param __UART7CLKSource__ specifies the UART7 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART7CLKSOURCE_D2PCLK1: APB1 Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL2: PLL2_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL3: PLL3_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_CSI: CSI Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock + */ +#define __HAL_RCC_UART7_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART7 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART7CLKSOURCE_D2PCLK1: APB1 Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL2: PLL2_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_PLL3: PLL3_Q Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_CSI: CSI Clock selected as UART7 clock + * @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock + */ +#define __HAL_RCC_GET_UART7_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +/** @brief macro to configure the UART8 clock (UART8CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART8CLKSOURCE_D2PCLK1: APB1 Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL2: PLL2_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL3: PLL3_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_CSI: CSI Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock + */ +#define __HAL_RCC_UART8_CONFIG __HAL_RCC_USART234578_CONFIG + +/** @brief macro to get the UART8 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART8CLKSOURCE_D2PCLK1: APB1 Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL2: PLL2_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_PLL3: PLL3_Q Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_CSI: CSI Clock selected as UART8 clock + * @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock + */ +#define __HAL_RCC_GET_UART8_SOURCE __HAL_RCC_GET_USART234578_SOURCE + +#if defined(UART9) +/** @brief macro to configure the UART9 clock (UART9CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_UART9CLKSOURCE_D2PCLK1: APB1 Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_PLL2: PLL2_Q Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_PLL3: PLL3_Q Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_HSI: HSI selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_CSI: CSI Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_LSE: LSE selected as UART9 clock + */ +#define __HAL_RCC_UART9_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the UART9 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_UART9CLKSOURCE_D2PCLK1: APB1 Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_PLL2: PLL2_Q Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_PLL3: PLL3_Q Clock selected as UART99 clock + * @arg RCC_UART9CLKSOURCE_HSI: HSI selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_CSI: CSI Clock selected as UART9 clock + * @arg RCC_UART9CLKSOURCE_LSE: LSE selected as UART9 clock + */ +#define __HAL_RCC_GET_UART9_SOURCE __HAL_RCC_GET_USART16_SOURCE +#endif /* UART9 */ + +#if defined(USART10) +/** @brief macro to configure the USART10 clock (USART10CLK). + * + * @param __UART8CLKSource__ specifies the UART8 clock source. + * This parameter can be one of the following values: + * @arg RCC_USART10CLKSOURCE_D2PCLK1: APB1 Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL2: PLL2_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL3: PLL3_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_HSI: HSI selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_CSI: CSI Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_LSE: LSE selected as USART10 clock + */ +#define __HAL_RCC_USART10_CONFIG __HAL_RCC_USART16_CONFIG + +/** @brief macro to get the USART10 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USART10CLKSOURCE_D2PCLK1: APB1 Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL2: PLL2_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_PLL3: PLL3_Q Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_HSI: HSI selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_CSI: CSI Clock selected as USART10 clock + * @arg RCC_USART10CLKSOURCE_LSE: LSE selected as USART10 clock + */ +#define __HAL_RCC_GET_USART10_SOURCE __HAL_RCC_GET_USART16_SOURCE +#endif /* USART10 */ + +/** @brief macro to configure the LPUART1 clock (LPUART1CLK). + * + * @param __LPUART1CLKSource__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_D3PCLK1: APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2: PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3: PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI: HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI: CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE: LSE selected as LPUART1 clock + */ +#if defined (RCC_D3CCIPR_LPUART1SEL) +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL, (uint32_t)(__LPUART1CLKSource__)) +#else +#define __HAL_RCC_LPUART1_CONFIG(__LPUART1CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL, (uint32_t)(__LPUART1CLKSource__)) +#endif /* RCC_D3CCIPR_LPUART1SEL */ + +/** @brief macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPUART1CLKSOURCE_D3PCLK1: APB4 Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL2: PLL2_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_PLL3: PLL3_Q Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_HSI: HSI selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_CSI: CSI Clock selected as LPUART1 clock + * @arg RCC_LPUART1CLKSOURCE_LSE: LSE selected as LPUART1 clock + */ +#if defined (RCC_D3CCIPR_LPUART1SEL) +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL))) +#else +#define __HAL_RCC_GET_LPUART1_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL))) +#endif /* RCC_D3CCIPR_LPUART1SEL */ + +/** @brief macro to configure the LPTIM1 clock source. + * + * @param __LPTIM1CLKSource__ specifies the LPTIM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_D2PCLK1: APB1 Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP: CLKP selected as LPTIM1 clock + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_LPTIM1SEL, (uint32_t)(__LPTIM1CLKSource__)) +#else +#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_LPTIM1SEL, (uint32_t)(__LPTIM1CLKSource__)) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ + +/** @brief macro to get the LPTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM1CLKSOURCE_D2PCLK1: APB1 Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_LSI: LSI Clock selected as LPTIM1 clock + * @arg RCC_LPTIM1CLKSOURCE_CLKP: CLKP selected as LPTIM1 clock + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_LPTIM1SEL))) +#else +#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_LPTIM1SEL))) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ + +/** @brief macro to configure the LPTIM2 clock source. + * + * @param __LPTIM2CLKSource__ specifies the LPTIM2 clock source. + * This parameter can be one of the following values: + * @arg RCC_LPTIM2CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSE: LSE selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSI: LSI Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_CLKP: CLKP selected as LPTIM2 clock + */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2CLKSource__)) +#else +#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2CLKSource__)) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ + +/** @brief macro to get the LPTIM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM2CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSE: LSE selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_LSI: LSI Clock selected as LPTIM2 clock + * @arg RCC_LPTIM2CLKSOURCE_CLKP: CLKP selected as LPTIM2 clock + */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM2SEL))) +#else +#define __HAL_RCC_GET_LPTIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM2SEL))) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ + +/** @brief macro to configure the LPTIM3/4/5 clock source. + * + * @param __LPTIM345CLKSource__ specifies the LPTIM3/4/5 clock source. + * @arg RCC_LPTIM345CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSE: LSE selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSI: LSI Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_CLKP: CLKP selected as LPTIM3/4/5 clock + */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define __HAL_RCC_LPTIM345_CONFIG(__LPTIM345CLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM345SEL, (uint32_t)(__LPTIM345CLKSource__)) +#else +#define __HAL_RCC_LPTIM345_CONFIG(__LPTIM345CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM3SEL, (uint32_t)(__LPTIM345CLKSource__)) +#endif /* RCC_D3CCIPR_LPTIM345SEL */ + +/** @brief macro to get the LPTIM3/4/5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM345CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSE: LSE selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_LSI: LSI Clock selected as LPTIM3/4/5 clock + * @arg RCC_LPTIM345CLKSOURCE_CLKP: CLKP selected as LPTIM3/4/5 clock + */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define __HAL_RCC_GET_LPTIM345_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPTIM345SEL))) +#else +#define __HAL_RCC_GET_LPTIM345_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPTIM3SEL))) +#endif /* RCC_D3CCIPR_LPTIM345SEL */ + +/** @brief macro to configure the LPTIM3 clock source. + * + * @param __LPTIM3CLKSource__ specifies the LPTIM3 clock source. + * @arg RCC_LPTIM3CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSE: LSE selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSI: LSI Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_CLKP: CLKP selected as LPTIM3 clock + */ +#define __HAL_RCC_LPTIM3_CONFIG __HAL_RCC_LPTIM345_CONFIG + +/** @brief macro to get the LPTIM3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM3CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSE: LSE selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_LSI: LSI Clock selected as LPTIM3 clock + * @arg RCC_LPTIM3CLKSOURCE_CLKP: CLKP selected as LPTIM3 clock + */ +#define __HAL_RCC_GET_LPTIM3_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE + +#if defined(LPTIM4) +/** @brief macro to configure the LPTIM4 clock source. + * + * @param __LPTIM4CLKSource__ specifies the LPTIM4 clock source. + * @arg RCC_LPTIM4CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSE: LSE selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSI: LSI Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_CLKP: CLKP selected as LPTIM4 clock + */ +#define __HAL_RCC_LPTIM4_CONFIG __HAL_RCC_LPTIM345_CONFIG + + +/** @brief macro to get the LPTIM4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM4CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSE: LSE selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_LSI: LSI Clock selected as LPTIM4 clock + * @arg RCC_LPTIM4CLKSOURCE_CLKP: CLKP selected as LPTIM4 clock + */ +#define __HAL_RCC_GET_LPTIM4_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE +#endif /* LPTIM4 */ + +#if defined(LPTIM5) +/** @brief macro to configure the LPTIM5 clock source. + * + * @param __LPTIM5CLKSource__ specifies the LPTIM5 clock source. + * @arg RCC_LPTIM5CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSE: LSE selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSI: LSI Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_CLKP: CLKP selected as LPTIM5 clock + */ +#define __HAL_RCC_LPTIM5_CONFIG __HAL_RCC_LPTIM345_CONFIG + + +/** @brief macro to get the LPTIM5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_LPTIM5CLKSOURCE_D3PCLK1: APB4 Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL2: PLL2_P Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_PLL3: PLL3_R Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSE: LSE selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_LSI: LSI Clock selected as LPTIM5 clock + * @arg RCC_LPTIM5CLKSOURCE_CLKP: CLKP selected as LPTIM5 clock + */ +#define __HAL_RCC_GET_LPTIM5_SOURCE __HAL_RCC_GET_LPTIM345_SOURCE +#endif /* LPTIM5 */ + +#if defined(QUADSPI) +/** @brief macro to configure the QSPI clock source. + * + * @param __QSPICLKSource__ specifies the QSPI clock source. + * @arg RCC_RCC_QSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL : PLL1_Q Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL2 : PLL2_R Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_CLKP CLKP selected as QSPI clock + */ +#define __HAL_RCC_QSPI_CONFIG(__QSPICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL, (uint32_t)(__QSPICLKSource__)) + + +/** @brief macro to get the QSPI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_QSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL : PLL1_Q Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_PLL2 : PLL2_R Clock selected as QSPI clock + * @arg RCC_RCC_QSPICLKSOURCE_CLKP CLKP selected as QSPI clock + */ +#define __HAL_RCC_GET_QSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL))) +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @brief macro to configure the OSPI clock source. + * + * @param __OSPICLKSource__ specifies the OSPI clock source. + * @arg RCC_RCC_OSPICLKSOURCE_CDHCLK: Domain1 HCLK Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL : PLL1_Q Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL2 : PLL2_R Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_CLKP CLKP selected as OSPI clock + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define __HAL_RCC_OSPI_CONFIG(__OSPICLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL, (uint32_t)(__OSPICLKSource__)) +#else +#define __HAL_RCC_OSPI_CONFIG(__OSPICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL, (uint32_t)(__OSPICLKSource__)) +#endif /* RCC_CDCCIPR_OCTOSPISEL */ + +/** @brief macro to get the OSPI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_OSPICLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL : PLL1_Q Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_PLL2 : PLL2_R Clock selected as OSPI clock + * @arg RCC_RCC_OSPICLKSOURCE_CLKP CLKP selected as OSPI clock + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define __HAL_RCC_GET_OSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL))) +#else +#define __HAL_RCC_GET_OSPI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL))) +#endif /* RCC_CDCCIPR_OCTOSPISEL */ +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + + +#if defined(DSI) +/** @brief macro to configure the DSI clock source. + * + * @param __DSICLKSource__ specifies the DSI clock source. + * @arg RCC_RCC_DSICLKSOURCE_PHY:DSI clock from PHY is selected as DSI byte lane clock + * @arg RCC_RCC_DSICLKSOURCE_PLL2 : PLL2_Q Clock clock is selected as DSI byte lane clock + */ +#define __HAL_RCC_DSI_CONFIG(__DSICLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL, (uint32_t)(__DSICLKSource__)) + + +/** @brief macro to get the DSI clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_DSICLKSOURCE_PHY: DSI clock from PHY is selected as DSI byte lane clock + * @arg RCC_RCC_DSICLKSOURCE_PLL2: PLL2_Q Clock clock is selected as DSI byte lane clock + */ +#define __HAL_RCC_GET_DSI_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL))) +#endif /*DSI*/ + +/** @brief macro to configure the FMC clock source. + * + * @param __FMCCLKSource__ specifies the FMC clock source. + * @arg RCC_RCC_FMCCLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL : PLL1_Q Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL2 : PLL2_R Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_CLKP CLKP selected as FMC clock + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define __HAL_RCC_FMC_CONFIG(__FMCCLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL, (uint32_t)(__FMCCLKSource__)) +#else +#define __HAL_RCC_FMC_CONFIG(__FMCCLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL, (uint32_t)(__FMCCLKSource__)) +#endif /* RCC_D1CCIPR_FMCSEL */ + +/** @brief macro to get the FMC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RCC_FMCCLKSOURCE_D1HCLK: Domain1 HCLK Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL : PLL1_Q Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_PLL2 : PLL2_R Clock selected as FMC clock + * @arg RCC_RCC_FMCCLKSOURCE_CLKP CLKP selected as FMC clock + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define __HAL_RCC_GET_FMC_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL))) +#else +#define __HAL_RCC_GET_FMC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL))) +#endif /* RCC_D1CCIPR_FMCSEL */ + +/** @brief Macro to configure the USB clock (USBCLK). + * @param __USBCLKSource__ specifies the USB clock source. + * This parameter can be one of the following values: + * @arg RCC_USBCLKSOURCE_PLL: PLL1Q selected as USB clock + * @arg RCC_USBCLKSOURCE_PLL3: PLL3Q Clock selected as USB clock + * @arg RCC_USBCLKSOURCE_HSI48: RC48 MHZ Clock selected as USB clock + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL, (uint32_t)(__USBCLKSource__)) +#else +#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL, (uint32_t)(__USBCLKSource__)) +#endif /* RCC_D2CCIP2R_USBSEL */ + +/** @brief Macro to get the USB clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_USBCLKSOURCE_PLL: PLL1Q selected as USB clock + * @arg RCC_USBCLKSOURCE_PLL3: PLL3Q Clock selected as USB clock + * @arg RCC_USBCLKSOURCE_HSI48: RC48 MHZ Clock selected as USB clock + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL))) +#else +#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL))) +#endif /* RCC_D2CCIP2R_USBSEL */ + +/** @brief Macro to configure the ADC clock + * @param __ADCCLKSource__ specifies the ADC digital interface clock source. + * This parameter can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2: PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3: PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP: CLKP Clock selected as ADC clock + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSource__) \ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL, (uint32_t)(__ADCCLKSource__)) +#else +#define __HAL_RCC_ADC_CONFIG(__ADCCLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL, (uint32_t)(__ADCCLKSource__)) +#endif /* RCC_D3CCIPR_ADCSEL */ + +/** @brief Macro to get the ADC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_ADCCLKSOURCE_PLL2: PLL2_P Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_PLL3: PLL3_R Clock selected as ADC clock + * @arg RCC_ADCCLKSOURCE_CLKP: CLKP Clock selected as ADC clock + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL))) +#else +#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL))) +#endif /* RCC_D3CCIPR_ADCSEL */ + +/** @brief Macro to configure the SWPMI1 clock + * @param __SWPMI1CLKSource__ specifies the SWPMI1 clock source. + * This parameter can be one of the following values: + * @arg RCC_SWPMI1CLKSOURCE_D2PCLK1: D2PCLK1 Clock selected as SWPMI1 clock + * @arg RCC_SWPMI1CLKSOURCE_HSI: HSI Clock selected as SWPMI1 clock + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL, (uint32_t)(__SWPMI1CLKSource__)) +#else +#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL, (uint32_t)(__SWPMI1CLKSource__)) +#endif /* RCC_D2CCIP1R_SWPSEL */ + +/** @brief Macro to get the SWPMI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SWPMI1CLKSOURCE_D2PCLK1: D2PCLK1 Clock selected as SWPMI1 clock + * @arg RCC_SWPMI1CLKSOURCE_HSI: HSI Clock selected as SWPMI1 clock + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define __HAL_RCC_GET_SWPMI1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL))) +#else +#define __HAL_RCC_GET_SWPMI1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL))) +#endif /* RCC_D2CCIP1R_SWPSEL */ + +/** @brief Macro to configure the DFSDM1 clock + * @param __DFSDM1CLKSource__ specifies the DFSDM1 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_D2PCLK: D2PCLK Clock selected as DFSDM1 clock + * @arg RCC_DFSDM1CLKSOURCE_SYS: System Clock selected as DFSDM1 clock + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1CLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL, (uint32_t)(__DFSDM1CLKSource__)) +#else +#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1CLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL, (uint32_t)(__DFSDM1CLKSource__)) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ + +/** @brief Macro to get the DFSDM1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM1CLKSOURCE_D2PCLK: D2PCLK Clock selected as DFSDM1 clock + * @arg RCC_DFSDM1CLKSOURCE_SYS: System Clock selected as DFSDM1 clock + */ +#if defined (RCC_D2CCIP1R_DFSDM1SEL) +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL))) +#else +#define __HAL_RCC_GET_DFSDM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL))) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ + +#if defined(DFSDM2_BASE) +/** @brief Macro to configure the DFSDM2 clock + * @param __DFSDM2CLKSource__ specifies the DFSDM2 clock source. + * This parameter can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_SRDPCLK1: SRDPCLK1 (APB4) selected as DFSDM2 clock + * @arg RCC_DFSDM2CLKSOURCE_SYS: System Clock selected as DFSDM2 clock + */ +#define __HAL_RCC_DFSDM2_CONFIG(__DFSDM2CLKSource__) \ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL, (uint32_t)(__DFSDM2CLKSource__)) + +/** @brief Macro to get the DFSDM2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_DFSDM2CLKSOURCE_SRDPCLK1: SRDPCLK1 (APB4) Clock selected as DFSDM2 clock + * @arg RCC_DFSDM2CLKSOURCE_SYS: System Clock selected as DFSDM2 clock + */ +#define __HAL_RCC_GET_DFSDM2_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL))) +#endif /* DFSDM2 */ + +/** @brief macro to configure the CEC clock (CECCLK). + * + * @param __CECCLKSource__ specifies the CEC clock source. + * This parameter can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI: LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI: CSI Clock selected as CEC clock + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL, (uint32_t)(__CECCLKSource__)) +#else +#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL, (uint32_t)(__CECCLKSource__)) +#endif /* RCC_D2CCIP2R_CECSEL */ + +/** @brief macro to get the CEC clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock + * @arg RCC_CECCLKSOURCE_LSI: LSI selected as CEC clock + * @arg RCC_CECCLKSOURCE_CSI: CSI Clock selected as CEC clock + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL))) +#else +#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL))) +#endif /* RCC_D2CCIP2R_CECSEL */ + +/** @brief Macro to configure the CLKP : Oscillator clock for peripheral + * @param __CLKPSource__ specifies Oscillator clock for peripheral + * This parameter can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI: HSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_CSI: CSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_HSE: HSE selected Oscillator clock for peripheral + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define __HAL_RCC_CLKP_CONFIG(__CLKPSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL, (uint32_t)(__CLKPSource__)) +#else +#define __HAL_RCC_CLKP_CONFIG(__CLKPSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL, (uint32_t)(__CLKPSource__)) +#endif /* RCC_D1CCIPR_CKPERSEL */ + +/** @brief Macro to get the Oscillator clock for peripheral source. + * @retval The clock source can be one of the following values: + * @arg RCC_CLKPSOURCE_HSI: HSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_CSI: CSI selected Oscillator clock for peripheral + * @arg RCC_CLKPSOURCE_HSE: HSE selected Oscillator clock for peripheral + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL))) +#else +#define __HAL_RCC_GET_CLKP_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL))) +#endif /* RCC_D1CCIPR_CKPERSEL */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @brief Macro to configure the FDCAN clock + * @param __FDCANCLKSource__ specifies clock source for FDCAN + * This parameter can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE: HSE selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL: PLL selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL2: PLL2 selected as FDCAN clock + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define __HAL_RCC_FDCAN_CONFIG(__FDCANCLKSource__) \ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL, (uint32_t)(__FDCANCLKSource__)) +#else +#define __HAL_RCC_FDCAN_CONFIG(__FDCANCLKSource__) \ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL, (uint32_t)(__FDCANCLKSource__)) +#endif /* RCC_D2CCIP1R_FDCANSEL */ + +/** @brief Macro to get the FDCAN clock + * @retval The clock source can be one of the following values: + * @arg RCC_FDCANCLKSOURCE_HSE: HSE selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL: PLL selected as FDCAN clock + * @arg RCC_FDCANCLKSOURCE_PLL2: PLL2 selected as FDCAN clock + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL))) +#else +#define __HAL_RCC_GET_FDCAN_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL))) +#endif /* RCC_D2CCIP1R_FDCANSEL */ + +#endif /*FDCAN1 || FDCAN2*/ + +/** + * @brief Macro to Configure the SPI1/2/3 clock source. + * @param __RCC_SPI123CLKSource__ defines the SPI1/2/3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI123CLKSOURCE_PLL: SPI1/2/3 clock = PLL + * @arg RCC_SPI123CLKSOURCE_PLL2: SPI1/2/3 clock = PLL2 + * @arg RCC_SPI123CLKSOURCE_PLL3: SPI1/2/3 clock = PLL3 + * @arg RCC_SPI123CLKSOURCE_CLKP: SPI1/2/3 clock = CLKP + * @arg RCC_SPI123CLKSOURCE_PIN: SPI1/2/3 clock = External Clock + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define __HAL_RCC_SPI123_CONFIG(__RCC_SPI123CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI123SEL, (__RCC_SPI123CLKSource__)) +#else +#define __HAL_RCC_SPI123_CONFIG(__RCC_SPI123CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI123SEL, (__RCC_SPI123CLKSource__)) +#endif /* RCC_D2CCIP1R_SPI123SEL */ + +/** @brief Macro to get the SPI1/2/3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI123CLKSOURCE_PLL: SPI1/2/3 clock = PLL + * @arg RCC_SPI123CLKSOURCE_PLL2: SPI1/2/3 clock = PLL2 + * @arg RCC_SPI123CLKSOURCE_PLL3: SPI1/2/3 clock = PLL3 + * @arg RCC_SPI123CLKSOURCE_CLKP: SPI1/2/3 clock = CLKP + * @arg RCC_SPI123CLKSOURCE_PIN: SPI1/2/3 clock = External Clock + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define __HAL_RCC_GET_SPI123_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI123SEL))) +#else +#define __HAL_RCC_GET_SPI123_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI123SEL))) +#endif /* RCC_D2CCIP1R_SPI123SEL */ + +/** + * @brief Macro to Configure the SPI1 clock source. + * @param __RCC_SPI1CLKSource__ defines the SPI1 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL: SPI1 clock = PLL + * @arg RCC_SPI1CLKSOURCE_PLL2: SPI1 clock = PLL2 + * @arg RCC_SPI1CLKSOURCE_PLL3: SPI1 clock = PLL3 + * @arg RCC_SPI1CLKSOURCE_CLKP: SPI1 clock = CLKP + * @arg RCC_SPI1CLKSOURCE_PIN: SPI1 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI1_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI1 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI1CLKSOURCE_PLL: SPI1 clock = PLL + * @arg RCC_SPI1CLKSOURCE_PLL2: SPI1 clock = PLL2 + * @arg RCC_SPI1CLKSOURCE_PLL3: SPI1 clock = PLL3 + * @arg RCC_SPI1CLKSOURCE_CLKP: SPI1 clock = CLKP + * @arg RCC_SPI1CLKSOURCE_PIN: SPI1 clock = External Clock + */ +#define __HAL_RCC_GET_SPI1_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI2 clock source. + * @param __RCC_SPI2CLKSource__ defines the SPI2 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI2CLKSOURCE_PLL: SPI2 clock = PLL + * @arg RCC_SPI2CLKSOURCE_PLL2: SPI2 clock = PLL2 + * @arg RCC_SPI2CLKSOURCE_PLL3: SPI2 clock = PLL3 + * @arg RCC_SPI2CLKSOURCE_CLKP: SPI2 clock = CLKP + * @arg RCC_SPI2CLKSOURCE_PIN: SPI2 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI2_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI2 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI2CLKSOURCE_PLL: SPI2 clock = PLL + * @arg RCC_SPI2CLKSOURCE_PLL2: SPI2 clock = PLL2 + * @arg RCC_SPI2CLKSOURCE_PLL3: SPI2 clock = PLL3 + * @arg RCC_SPI2CLKSOURCE_CLKP: SPI2 clock = CLKP + * @arg RCC_SPI2CLKSOURCE_PIN: SPI2 clock = External Clock + */ +#define __HAL_RCC_GET_SPI2_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI3 clock source. + * @param __RCC_SPI3CLKSource__ defines the SPI3 clock source. This clock is derived + * from system PLL, PLL2, PLL3, OSC or external clock (through a dedicated PIN) + * This parameter can be one of the following values: + * @arg RCC_SPI3CLKSOURCE_PLL: SPI3 clock = PLL + * @arg RCC_SPI3CLKSOURCE_PLL2: SPI3 clock = PLL2 + * @arg RCC_SPI3CLKSOURCE_PLL3: SPI3 clock = PLL3 + * @arg RCC_SPI3CLKSOURCE_CLKP: SPI3 clock = CLKP + * @arg RCC_SPI3CLKSOURCE_PIN: SPI3 clock = External Clock + * @retval None + */ +#define __HAL_RCC_SPI3_CONFIG __HAL_RCC_SPI123_CONFIG + +/** @brief Macro to get the SPI3 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI3CLKSOURCE_PLL: SPI3 clock = PLL + * @arg RCC_SPI3CLKSOURCE_PLL2: SPI3 clock = PLL2 + * @arg RCC_SPI3CLKSOURCE_PLL3: SPI3 clock = PLL3 + * @arg RCC_SPI3CLKSOURCE_CLKP: SPI3 clock = CLKP + * @arg RCC_SPI3CLKSOURCE_PIN: SPI3 clock = External Clock + */ +#define __HAL_RCC_GET_SPI3_SOURCE __HAL_RCC_GET_SPI123_SOURCE + +/** + * @brief Macro to Configure the SPI4/5 clock source. + * @param __RCC_SPI45CLKSource__ defines the SPI4/5 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_D2PCLK2:SPI4/5 clock = D2PCLK2 + * @arg RCC_SPI45CLKSOURCE_PLL2: SPI4/5 clock = PLL2 + * @arg RCC_SPI45CLKSOURCE_PLL3: SPI4/5 clock = PLL3 + * @arg RCC_SPI45CLKSOURCE_HSI: SPI4/5 clock = HSI + * @arg RCC_SPI45CLKSOURCE_CSI: SPI4/5 clock = CSI + * @arg RCC_SPI45CLKSOURCE_HSE: SPI4/5 clock = HSE + * @retval None + */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define __HAL_RCC_SPI45_CONFIG(__RCC_SPI45CLKSource__ )\ + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI45SEL, (__RCC_SPI45CLKSource__)) +#else +#define __HAL_RCC_SPI45_CONFIG(__RCC_SPI45CLKSource__ )\ + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI45SEL, (__RCC_SPI45CLKSource__)) +#endif /* RCC_D2CCIP1R_SPI45SEL */ + +/** @brief Macro to get the SPI4/5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI45CLKSOURCE_D2PCLK2:SPI4/5 clock = D2PCLK2 + * @arg RCC_SPI45CLKSOURCE_PLL2: SPI4/5 clock = PLL2 + * @arg RCC_SPI45CLKSOURCE_PLL3: SPI4/5 clock = PLL3 + * @arg RCC_SPI45CLKSOURCE_HSI: SPI4/5 clock = HSI + * @arg RCC_SPI45CLKSOURCE_CSI: SPI4/5 clock = CSI + * @arg RCC_SPI45CLKSOURCE_HSE: SPI4/5 clock = HSE +*/ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPI45SEL))) +#else +#define __HAL_RCC_GET_SPI45_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPI45SEL))) +#endif /* RCC_D2CCIP1R_SPI45SEL */ + +/** + * @brief Macro to Configure the SPI4 clock source. + * @param __RCC_SPI4CLKSource__ defines the SPI4 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI4CLKSOURCE_D2PCLK2:SPI4 clock = D2PCLK2 + * @arg RCC_SPI4CLKSOURCE_PLL2: SPI4 clock = PLL2 + * @arg RCC_SPI4CLKSOURCE_PLL3: SPI4 clock = PLL3 + * @arg RCC_SPI4CLKSOURCE_HSI: SPI4 clock = HSI + * @arg RCC_SPI4CLKSOURCE_CSI: SPI4 clock = CSI + * @arg RCC_SPI4CLKSOURCE_HSE: SPI4 clock = HSE + * @retval None + */ +#define __HAL_RCC_SPI4_CONFIG __HAL_RCC_SPI45_CONFIG + +/** @brief Macro to get the SPI4 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI4CLKSOURCE_D2PCLK2:SPI4 clock = D2PCLK2 + * @arg RCC_SPI4CLKSOURCE_PLL2: SPI4 clock = PLL2 + * @arg RCC_SPI4CLKSOURCE_PLL3: SPI4 clock = PLL3 + * @arg RCC_SPI4CLKSOURCE_HSI: SPI4 clock = HSI + * @arg RCC_SPI4CLKSOURCE_CSI: SPI4 clock = CSI + * @arg RCC_SPI4CLKSOURCE_HSE: SPI4 clock = HSE +*/ +#define __HAL_RCC_GET_SPI4_SOURCE __HAL_RCC_GET_SPI45_SOURCE + +/** + * @brief Macro to Configure the SPI5 clock source. + * @param __RCC_SPI5CLKSource__ defines the SPI5 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI5CLKSOURCE_D2PCLK2:SPI5 clock = D2PCLK2 + * @arg RCC_SPI5CLKSOURCE_PLL2: SPI5 clock = PLL2 + * @arg RCC_SPI5CLKSOURCE_PLL3: SPI5 clock = PLL3 + * @arg RCC_SPI5CLKSOURCE_HSI: SPI5 clock = HSI + * @arg RCC_SPI5CLKSOURCE_CSI: SPI5 clock = CSI + * @arg RCC_SPI5CLKSOURCE_HSE: SPI5 clock = HSE + * @retval None + */ +#define __HAL_RCC_SPI5_CONFIG __HAL_RCC_SPI45_CONFIG + +/** @brief Macro to get the SPI5 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI5CLKSOURCE_D2PCLK2:SPI5 clock = D2PCLK2 + * @arg RCC_SPI5CLKSOURCE_PLL2: SPI5 clock = PLL2 + * @arg RCC_SPI5CLKSOURCE_PLL3: SPI5 clock = PLL3 + * @arg RCC_SPI5CLKSOURCE_HSI: SPI5 clock = HSI + * @arg RCC_SPI5CLKSOURCE_CSI: SPI5 clock = CSI + * @arg RCC_SPI5CLKSOURCE_HSE: SPI5 clock = HSE +*/ +#define __HAL_RCC_GET_SPI5_SOURCE __HAL_RCC_GET_SPI45_SOURCE + +/** + * @brief Macro to Configure the SPI6 clock source. + * @param __RCC_SPI6CLKSource__ defines the SPI6 clock source. This clock is derived + * from system PCLK, PLL2, PLL3, OSC + * This parameter can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_D3PCLK1:SPI6 clock = D2PCLK1 + * @arg RCC_SPI6CLKSOURCE_PLL2: SPI6 clock = PLL2 + * @arg RCC_SPI6CLKSOURCE_PLL3: SPI6 clock = PLL3 + * @arg RCC_SPI6CLKSOURCE_HSI: SPI6 clock = HSI + * @arg RCC_SPI6CLKSOURCE_CSI: SPI6 clock = CSI + * @arg RCC_SPI6CLKSOURCE_HSE: SPI6 clock = HSE + * @arg RCC_SPI6CLKSOURCE_PIN: SPI6 clock = I2S_CKIN (*) + * + * @retval None + * + * (*) : Available on stm32h7a3xx and stm32h7b3xx family lines. + * + */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define __HAL_RCC_SPI6_CONFIG(__RCC_SPI6CLKSource__ )\ + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_SPI6SEL, (__RCC_SPI6CLKSource__)) +#else +#define __HAL_RCC_SPI6_CONFIG(__RCC_SPI6CLKSource__ )\ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_SPI6SEL, (__RCC_SPI6CLKSource__)) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +/** @brief Macro to get the SPI6 clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_SPI6CLKSOURCE_D3PCLK1:SPI6 clock = D2PCLK1 + * @arg RCC_SPI6CLKSOURCE_PLL2: SPI6 clock = PLL2 + * @arg RCC_SPI6CLKSOURCE_PLL3: SPI6 clock = PLL3 + * @arg RCC_SPI6CLKSOURCE_HSI: SPI6 clock = HSI + * @arg RCC_SPI6CLKSOURCE_CSI: SPI6 clock = CSI + * @arg RCC_SPI6CLKSOURCE_HSE: SPI6 clock = HSE + * @arg RCC_SPI6CLKSOURCE_PIN: SPI6 clock = I2S_CKIN +*/ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_SPI6SEL))) +#else +#define __HAL_RCC_GET_SPI6_SOURCE() ((uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_SPI6SEL))) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +/** @brief Macro to configure the SDMMC clock + * @param __SDMMCCLKSource__ specifies clock source for SDMMC + * This parameter can be one of the following values: + * @arg RCC_SDMMCCLKSOURCE_PLL: PLLQ selected as SDMMC clock + * @arg RCC_SDMMCCLKSOURCE_PLL2: PLL2R selected as SDMMC clock + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define __HAL_RCC_SDMMC_CONFIG(__SDMMCCLKSource__) \ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL, (uint32_t)(__SDMMCCLKSource__)) +#else +#define __HAL_RCC_SDMMC_CONFIG(__SDMMCCLKSource__) \ + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL, (uint32_t)(__SDMMCCLKSource__)) +#endif /* RCC_D1CCIPR_SDMMCSEL */ + +/** @brief Macro to get the SDMMC clock + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define __HAL_RCC_GET_SDMMC_SOURCE() ((uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL))) +#else +#define __HAL_RCC_GET_SDMMC_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL))) +#endif /* RCC_D1CCIPR_SDMMCSEL */ + +/** @brief macro to configure the RNG clock (RNGCLK). + * + * @param __RNGCLKSource__ specifies the RNG clock source. + * This parameter can be one of the following values: + * @arg RCC_RNGCLKSOURCE_HSI48: HSI48 selected as RNG clock + * @arg RCC_RNGCLKSOURCE_PLL: PLL1Q selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSE: LSE selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSI: LSI selected as RNG clock + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define __HAL_RCC_RNG_CONFIG(__RNGCLKSource__) \ + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL, (uint32_t)(__RNGCLKSource__)) +#else +#define __HAL_RCC_RNG_CONFIG(__RNGCLKSource__) \ + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL, (uint32_t)(__RNGCLKSource__)) +#endif /* RCC_D2CCIP2R_RNGSEL */ + +/** @brief macro to get the RNG clock source. + * @retval The clock source can be one of the following values: + * @arg RCC_RNGCLKSOURCE_HSI48: HSI48 selected as RNG clock + * @arg RCC_RNGCLKSOURCE_PLL: PLL1Q selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSE: LSE selected as RNG clock + * @arg RCC_RNGCLKSOURCE_LSI: LSI selected as RNG clock + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL))) +#else +#define __HAL_RCC_GET_RNG_SOURCE() ((uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL))) +#endif /* RCC_D2CCIP2R_RNGSEL */ + +#if defined(HRTIM1) +/** @brief Macro to configure the HRTIM1 prescaler clock source. + * @param __HRTIM1CLKSource__ specifies the HRTIM1 prescaler clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_HRTIM1CLK_TIMCLK Timers clock selected as HRTIM1 prescaler clock + * @arg @ref RCC_HRTIM1CLK_CPUCLK CPU Clock selected as HRTIM1 clock + */ +#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HRTIMSEL, (uint32_t)(__HRTIM1CLKSource__)) + +/** @brief Macro to get the HRTIM1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_HRTIM1CLK_TIMCLK Timers clock selected as HRTIM1 prescaler clock + * @arg @ref RCC_HRTIM1CLK_CPUCLK CPU Clock selected as HRTIM1 clock + */ +#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HRTIMSEL))) +#endif /* HRTIM1 */ + +/** @brief Macro to configure the Timers clocks prescalers + * @param __PRESC__ specifies the Timers clocks prescalers selection + * This parameter can be one of the following values: + * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is + * equal to rcc_hclk1 if D2PPREx is corresponding to division by 1 or 2, + * else it is equal to 2 x Frcc_pclkx_d2 (default after reset) + * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is + * equal to rcc_hclk1 if D2PPREx is corresponding to division by 1, 2 or 4, + * else it is equal to 4 x Frcc_pclkx_d2 + */ +#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->CFGR &= ~(RCC_CFGR_TIMPRE);\ + RCC->CFGR |= (__PRESC__); \ + }while(0) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line. + * @retval None + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS) + +#if defined(DUAL_CORE) +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Line for CM4. + * @retval None + */ +#define __HAL_RCC_C2_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->C2IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Line for CM4. + * @retval None + */ +#define __HAL_RCC_C2_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->C2IMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Event Line for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->C2EMR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Event Line for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->C2EMR1, RCC_EXTI_LINE_LSECSS) +#endif /* DUAL_CORE */ + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS) + + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \ + do { \ + __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) + +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS) + +#if defined(DUAL_CORE) +/** + * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not for CM4. + * @retval EXTI RCC LSE CSS Line Status. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->C2PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS) + +/** + * @brief Clear the RCC LSE CSS EXTI flag or not for CM4. + * @retval None. + */ +#define __HAL_RCC_C2_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->C2PR1, RCC_EXTI_LINE_LSECSS) +#endif /* DUAL_CORE */ +/** + * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line. + * @retval None. + */ +#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS) + +/** + * @brief Enable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__)) + +/** + * @brief Disable the specified CRS interrupts. + * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval None + */ +#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__)) + +/** @brief Check whether the CRS interrupt has occurred or not. + * @param __INTERRUPT__ specifies the CRS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET) + +/** @brief Clear the CRS interrupt pending bits + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt + * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt + * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt + * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt + * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt + * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt + * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt + */ +/* CRS IT Error Mask */ +#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \ + if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__INTERRUPT__)); \ + } \ + } while(0) + +/** + * @brief Check whether the specified CRS flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @retval The new state of _FLAG_ (TRUE or FALSE). + */ +#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__)) + +/** + * @brief Clear the CRS specified FLAG. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK + * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning + * @arg @ref RCC_CRS_FLAG_ERR Error + * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC + * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow + * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error + * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed + * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR + * @retval None + */ + +/* CRS Flag Error Mask */ +#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)) + +#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \ + if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \ + { \ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \ + } \ + else \ + { \ + WRITE_REG(CRS->ICR, (__FLAG__)); \ + } \ + } while(0) + +/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features + * @{ + */ +/** + * @brief Enable the oscillator clock for frequency error counter. + * @note when the CEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Disable the oscillator clock for frequency error counter. + * @retval None + */ +#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN) + +/** + * @brief Enable the automatic hardware adjustment of TRIM bits. + * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Enable or disable the automatic hardware adjustment of TRIM bits. + * @retval None + */ +#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency + * of the synchronization source after pre-scaling. It is then decreased by one in order to + * reach the expected synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval None + */ +#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + + +/** + * @} + */ + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint64_t PeriphClk); +uint32_t HAL_RCCEx_GetD1PCLK1Freq(void); +uint32_t HAL_RCCEx_GetD3PCLK1Freq(void); +uint32_t HAL_RCCEx_GetD1SysClockFreq(void); +void HAL_RCCEx_GetPLL1ClockFreq(PLL1_ClocksTypeDef *PLL1_Clocks); +void HAL_RCCEx_GetPLL2ClockFreq(PLL2_ClocksTypeDef *PLL2_Clocks); +void HAL_RCCEx_GetPLL3ClockFreq(PLL3_ClocksTypeDef *PLL3_Clocks); +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk); +void HAL_RCCEx_EnableLSECSS(void); +void HAL_RCCEx_DisableLSECSS(void); +void HAL_RCCEx_EnableLSECSS_IT(void); +void HAL_RCCEx_LSECSS_IRQHandler(void); +void HAL_RCCEx_LSECSS_Callback(void); +#if defined(DUAL_CORE) +void HAL_RCCEx_EnableBootCore(uint32_t RCC_BootCx); +#endif /*DUAL_CORE*/ +#if defined(RCC_GCR_WW1RSC) +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx); +#endif /*RCC_GCR_WW1RSC*/ +/** + * @} + */ + + +/** @addtogroup RCCEx_Exported_Functions_Group3 + * @{ + */ + +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit); +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void); +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo); +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout); +void HAL_RCCEx_CRS_IRQHandler(void); +void HAL_RCCEx_CRS_SyncOkCallback(void); +void HAL_RCCEx_CRS_SyncWarnCallback(void); +void HAL_RCCEx_CRS_ExpectedSyncCallback(void); +void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_PLL2CLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL2_DIVP) || \ + ((VALUE) == RCC_PLL2_DIVQ) || \ + ((VALUE) == RCC_PLL2_DIVR)) + +#define IS_RCC_PLL3CLOCKOUT_VALUE(VALUE) (((VALUE) == RCC_PLL3_DIVP) || \ + ((VALUE) == RCC_PLL3_DIVQ) || \ + ((VALUE) == RCC_PLL3_DIVR)) + +#if defined(RCC_D2CCIP2R_USART16SEL) +#define IS_RCC_USART16CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART16CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_HSI)) +#else +#define IS_RCC_USART16CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART16CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_CDPCLK2)|| \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART16CLKSOURCE_HSI)) +/* alias*/ +#define IS_RCC_USART16910CLKSOURCE IS_RCC_USART16CLKSOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ + +#if defined(RCC_D2CCIP2R_USART28SEL) +#define IS_RCC_USART234578CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART234578CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_HSI)) +#else +#define IS_RCC_USART234578CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART234578CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CDPCLK1)|| \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART234578CLKSOURCE_HSI)) +#endif /* RCC_D2CCIP2R_USART28SEL */ + +#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART1CLKSOURCE_HSI)) + +#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART2CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART2CLKSOURCE_HSI)) + +#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_USART3CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART3CLKSOURCE_HSI)) + +#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART4CLKSOURCE_HSI)) + +#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART5CLKSOURCE_HSI)) + +#define IS_RCC_USART6CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART6CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART6CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART6CLKSOURCE_HSI)) + +#define IS_RCC_UART7CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART7CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART7CLKSOURCE_HSI)) + +#define IS_RCC_UART8CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART8CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART8CLKSOURCE_HSI)) + +#if defined(UART9) +#define IS_RCC_UART9CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART9CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_UART9CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_UART9CLKSOURCE_HSI)) +#endif + +#if defined(USART10) +#define IS_RCC_USART10CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART10CLKSOURCE_D2PCLK2)|| \ + ((SOURCE) == RCC_USART10CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_USART10CLKSOURCE_HSI)) +#endif + +#define IS_RCC_LPUART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_LPUART1CLKSOURCE_D3PCLK1) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_CSI) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPUART1CLKSOURCE_HSI)) + +#if defined(I2C5) +#define IS_RCC_I2C1235CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1235CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_I2C1235CLKSOURCE_CSI)) + +#define IS_RCC_I2C123CLKSOURCE IS_RCC_I2C1235CLKSOURCE /* For API Backward compatibility */ +#else +#define IS_RCC_I2C123CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C123CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C123CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C123CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C123CLKSOURCE_CSI)) +#endif /*I2C5*/ + +#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C1CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C1CLKSOURCE_CSI)) + +#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C2CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C2CLKSOURCE_CSI)) + +#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C3CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C3CLKSOURCE_CSI)) + +#define IS_RCC_I2C4CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C4CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C4CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_I2C4CLKSOURCE_CSI)) + +#if defined(I2C5) +#define IS_RCC_I2C5CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_I2C5CLKSOURCE_HSI) || \ + ((SOURCE) == RCC_I2C5CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_I2C5CLKSOURCE_CSI)) +#endif /*I2C5*/ + +#define IS_RCC_RNGCLKSOURCE(SOURCE) (((SOURCE) == RCC_RNGCLKSOURCE_HSI48)|| \ + ((SOURCE) == RCC_RNGCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_RNGCLKSOURCE_LSE) || \ + ((SOURCE) == RCC_RNGCLKSOURCE_LSI)) + +#if defined(HRTIM1) +#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_TIMCLK) || \ + ((SOURCE) == RCC_HRTIM1CLK_CPUCLK)) +#endif + +#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_USBCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_USBCLKSOURCE_HSI48)) + +#define IS_RCC_SAI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN)) + +#if defined(SAI3) +#define IS_RCC_SAI23CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI23CLKSOURCE_PIN)) + +#define IS_RCC_SAI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN)) + + +#define IS_RCC_SAI3CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI3CLKSOURCE_PIN)) +#endif + +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define IS_RCC_SAI2ACLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2ACLKSOURCE_SPDIF)) +#endif + +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define IS_RCC_SAI2BCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_PIN) || \ + ((__SOURCE__) == RCC_SAI2BCLKSOURCE_SPDIF)) +#endif + +#define IS_RCC_SPI123CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI123CLKSOURCE_PIN)) + +#define IS_RCC_SPI1CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI1CLKSOURCE_PIN)) + +#define IS_RCC_SPI2CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI2CLKSOURCE_PIN)) + +#define IS_RCC_SPI3CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SPI3CLKSOURCE_PIN)) + +#define IS_RCC_SPI45CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI45CLKSOURCE_D2PCLK2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI45CLKSOURCE_HSE)) + +#define IS_RCC_SPI4CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI4CLKSOURCE_D2PCLK2) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI4CLKSOURCE_HSE)) + +#define IS_RCC_SPI5CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI5CLKSOURCE_D2PCLK2)|| \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI5CLKSOURCE_HSE)) + +#if defined(RCC_D3CCIPR_SPI6SEL) +#define IS_RCC_SPI6CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_D3PCLK1) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE)) +#else +#define IS_RCC_SPI6CLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SPI6CLKSOURCE_D3PCLK1) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_CSI) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_SPI6CLKSOURCE_PIN)) +#endif /* RCC_D3CCIPR_SPI6SEL */ + +#if defined(SAI4) +#define IS_RCC_SAI4ACLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI4ACLKSOURCE_PIN)) + +#define IS_RCC_SAI4BCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PLL3) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_CLKP) || \ + ((__SOURCE__) == RCC_SAI4BCLKSOURCE_PIN)) +#endif /*SAI4*/ + +#define IS_RCC_PLL3M_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#define IS_RCC_PLL3N_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#define IS_RCC_PLL3P_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL3Q_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL3R_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLL2M_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 63U)) +#define IS_RCC_PLL2N_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 512U)) +#define IS_RCC_PLL2P_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL2Q_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) +#define IS_RCC_PLL2R_VALUE(VALUE) ((1U <= (VALUE)) && ((VALUE) <= 128U)) + +#define IS_RCC_PLL2RGE_VALUE(VALUE) (((VALUE) == RCC_PLL2VCIRANGE_0) || \ + ((VALUE) == RCC_PLL2VCIRANGE_1) || \ + ((VALUE) == RCC_PLL2VCIRANGE_2) || \ + ((VALUE) == RCC_PLL2VCIRANGE_3)) + +#define IS_RCC_PLL3RGE_VALUE(VALUE) (((VALUE) == RCC_PLL3VCIRANGE_0) || \ + ((VALUE) == RCC_PLL3VCIRANGE_1) || \ + ((VALUE) == RCC_PLL3VCIRANGE_2) || \ + ((VALUE) == RCC_PLL3VCIRANGE_3)) + +#define IS_RCC_PLL2VCO_VALUE(VALUE) (((VALUE) == RCC_PLL2VCOWIDE) || \ + ((VALUE) == RCC_PLL2VCOMEDIUM)) + +#define IS_RCC_PLL3VCO_VALUE(VALUE) (((VALUE) == RCC_PLL3VCOWIDE) || \ + ((VALUE) == RCC_PLL3VCOMEDIUM)) + +#define IS_RCC_LPTIM1CLK(SOURCE) (((SOURCE) == RCC_LPTIM1CLKSOURCE_D2PCLK1)|| \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM1CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM2CLK(SOURCE) (((SOURCE) == RCC_LPTIM2CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM2CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM345CLK(SOURCE) (((SOURCE) == RCC_LPTIM345CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM345CLKSOURCE_CLKP)) + +#define IS_RCC_LPTIM3CLK(SOURCE) (((SOURCE) == RCC_LPTIM3CLKSOURCE_D3PCLK1) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM3CLKSOURCE_CLKP)) + +#if defined(LPTIM4) +#define IS_RCC_LPTIM4CLK(SOURCE) (((SOURCE) == RCC_LPTIM4CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM4CLKSOURCE_CLKP)) +#endif /* LPTIM4*/ + +#if defined(LPTIM5) +#define IS_RCC_LPTIM5CLK(SOURCE) (((SOURCE) == RCC_LPTIM5CLKSOURCE_D3PCLK1)|| \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_LSE) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_LSI) || \ + ((SOURCE) == RCC_LPTIM5CLKSOURCE_CLKP)) +#endif /*LPTIM5*/ + +#if defined(QUADSPI) +#define IS_RCC_QSPICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_QSPICLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_QSPICLKSOURCE_CLKP)) +#endif /*QUADSPI*/ + +#if defined(OCTOSPI1) || defined(OCTOSPI1) +#define IS_RCC_OSPICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_OSPICLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_OSPICLKSOURCE_CLKP)) +#endif /*OCTOSPI1 || OCTOSPI1*/ + +#if defined(DSI) +#define IS_RCC_DSICLK(__SOURCE__) \ + (((__SOURCE__) == RCC_DSICLKSOURCE_PHY) || \ + ((__SOURCE__) == RCC_DSICLKSOURCE_PLL2)) +#endif /*DSI*/ + +#define IS_RCC_FMCCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_FMCCLKSOURCE_D1HCLK) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_PLL2) || \ + ((__SOURCE__) == RCC_FMCCLKSOURCE_CLKP)) + +#if defined(FDCAN1) || defined(FDCAN2) +#define IS_RCC_FDCANCLK(__SOURCE__) \ + (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL2)) +#endif /*FDCAN1 || FDCAN2*/ + +#define IS_RCC_SDMMC(__SOURCE__) \ + (((__SOURCE__) == RCC_SDMMCCLKSOURCE_PLL) || \ + ((__SOURCE__) == RCC_SDMMCCLKSOURCE_PLL2)) + +#define IS_RCC_ADCCLKSOURCE(SOURCE) (((SOURCE) == RCC_ADCCLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_ADCCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_ADCCLKSOURCE_CLKP)) + +#define IS_RCC_SWPMI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SWPMI1CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_SWPMI1CLKSOURCE_HSI)) + +#define IS_RCC_DFSDM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM1CLKSOURCE_D2PCLK1) || \ + ((SOURCE) == RCC_DFSDM1CLKSOURCE_SYS)) + +#if defined(DFSDM2_BASE) +#define IS_RCC_DFSDM2CLKSOURCE(SOURCE) (((SOURCE) == RCC_DFSDM2CLKSOURCE_SRDPCLK1) || \ + ((SOURCE) == RCC_DFSDM2CLKSOURCE_SYS)) +#endif /*DFSDM2*/ + +#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE)(((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL2) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLL3) || \ + ((SOURCE) == RCC_SPDIFRXCLKSOURCE_HSI)) + +#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_LSE) || \ + ((SOURCE) == RCC_CECCLKSOURCE_LSI) || \ + ((SOURCE) == RCC_CECCLKSOURCE_CSI)) + +#define IS_RCC_CLKPSOURCE(SOURCE) (((SOURCE) == RCC_CLKPSOURCE_HSI) || \ + ((SOURCE) == RCC_CLKPSOURCE_CSI) || \ + ((SOURCE) == RCC_CLKPSOURCE_HSE)) +#define IS_RCC_TIMPRES(VALUE) \ + (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \ + ((VALUE) == RCC_TIMPRES_ACTIVATED)) + +#if defined(DUAL_CORE) +#define IS_RCC_BOOT_CORE(CORE) (((CORE) == RCC_BOOT_C1) || \ + ((CORE) == RCC_BOOT_C2)) +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +#define IS_RCC_SCOPE_WWDG(WWDG) (((WWDG) == RCC_WWDG1) || \ + ((WWDG) == RCC_WWDG2)) +#else +#define IS_RCC_SCOPE_WWDG(WWDG) ((WWDG) == RCC_WWDG1) + +#endif /*DUAL_CORE*/ + +#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB2) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB1) || \ + ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_PIN)) + +#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \ + ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128)) + +#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \ + ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING)) + +#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU)) + +#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU)) + +#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU)) + +#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \ + ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_RCC_EX_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h new file mode 100644 index 0000000..6daa529 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h @@ -0,0 +1,2462 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_TIM_H +#define STM32H7xx_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + * @note Advanced timers provide TRGO2 internal line which is redirected + * to the ADC + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +#if defined(TIM_BDTR_BKBID) + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + +#endif /* TIM_BDTR_BKBID */ + uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */ + + uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */ + + uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +#if defined(TIM_BDTR_BKBID) + uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */ + +#endif /* TIM_BDTR_BKBID */ + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */ + HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ + void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ + void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ + , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_CCMR3 0x00000015U +#define TIM_DMABASE_CCR5 0x00000016U +#define TIM_DMABASE_CCR6 0x00000017U +#if defined(TIM_BREAK_INPUT_SUPPORT) +#define TIM_DMABASE_AF1 0x00000018U +#define TIM_DMABASE_AF2 0x00000019U +#endif /* TIM_BREAK_INPUT_SUPPORT */ +#define TIM_DMABASE_TISEL 0x0000001AU +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */ +#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */ +#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */ +#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ +#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ +#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ +#define TIM_CLOCKSOURCE_ITR4 TIM_TS_ITR4 /*!< External clock source mode 1 (ITR4) */ +#define TIM_CLOCKSOURCE_ITR5 TIM_TS_ITR5 /*!< External clock source mode 1 (ITR5) */ +#define TIM_CLOCKSOURCE_ITR6 TIM_TS_ITR6 /*!< External clock source mode 1 (ITR6) */ +#define TIM_CLOCKSOURCE_ITR7 TIM_TS_ITR7 /*!< External clock source mode 1 (ITR7) */ +#define TIM_CLOCKSOURCE_ITR8 TIM_TS_ITR8 /*!< External clock source mode 1 (ITR8) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ +#if defined(TIM_BDTR_BKBID) + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ +#endif /*TIM_BDTR_BKBID */ + +/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable + * @{ + */ +#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */ +#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity + * @{ + */ +#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */ +#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */ +/** + * @} + */ +#if defined(TIM_BDTR_BKBID) + +/** @defgroup TIM_Break2_Input_AF_Mode TIM Break2 Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK2_AFMODE_INPUT 0x00000000U /*!< Break2 input BRK2 in input mode */ +#define TIM_BREAK2_AFMODE_BIDIRECTIONAL TIM_BDTR_BK2BID /*!< Break2 input BRK2 in bidirectional mode */ +/** + * @} + */ +#endif /* TIM_BDTR_BKBID */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3 + * @{ + */ +#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */ +#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */ +#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */ +#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2) + * @{ + */ +#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */ +#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */ +#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASSYMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ +#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ +#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ +#define TIM_TS_ITR4 (TIM_SMCR_TS_3) /*!< Internal Trigger 4 (ITR4) */ +#define TIM_TS_ITR5 (TIM_SMCR_TS_0 | TIM_SMCR_TS_3) /*!< Internal Trigger 5 (ITR5) */ +#define TIM_TS_ITR6 (TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 6 (ITR6) */ +#define TIM_TS_ITR7 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_3) /*!< Internal Trigger 7 (ITR7) */ +#define TIM_TS_ITR8 (TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 8 (ITR8) */ +#define TIM_TS_ITR9 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 9 (ITR9) */ +#define TIM_TS_ITR10 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 10 (ITR10) */ +#define TIM_TS_ITR11 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2 | TIM_SMCR_TS_3) /*!< Internal Trigger 11 (ITR11) */ +#define TIM_TS_ITR12 (TIM_SMCR_TS_4) /*!< Internal Trigger 12 (ITR12) */ +#define TIM_TS_ITR13 (TIM_SMCR_TS_0 | TIM_SMCR_TS_4) /*!< Internal Trigger 13 (ITR13) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_System TIM Break System + * @{ + */ +#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/8/15/16/17 */ +#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/8/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */ +#define TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/8/15/16/17 */ +#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/8/15/16/17 */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ + (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_COM: Commutation DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_CC5: Compare 5 interrupt flag + * @arg TIM_FLAG_CC6: Compare 6 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag + * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR6 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @arg TIM_CHANNEL_5: get capture/compare 5 register value + * @arg TIM_CHANNEL_6: get capture/compare 6 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\ + ((__HANDLE__)->Instance->CCR6)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\ + ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_CCMR3) || \ + ((__BASE__) == TIM_DMABASE_CCR5) || \ + ((__BASE__) == TIM_DMABASE_CCR6) || \ + ((__BASE__) == TIM_DMABASE_AF1) || \ + ((__BASE__) == TIM_DMABASE_AF2) || \ + ((__BASE__) == TIM_DMABASE_TISEL)) + + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENABLE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_5) || \ + ((__CHANNEL__) == TIM_CHANNEL_6) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) \ + ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : ((__PERIOD__) > 0U)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + +#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) +#if defined(TIM_BDTR_BKBID) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + +#endif /* TIM_BDTR_BKBID */ + +#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \ + ((__STATE__) == TIM_BREAK2_DISABLE)) + +#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH)) +#if defined(TIM_BDTR_BKBID) + +#define IS_TIM_BREAK2_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK2_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK2_AFMODE_BIDIRECTIONAL)) + +#endif /* TIM_BDTR_BKBID */ + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \ + ((__SOURCE__) == TIM_TRGO2_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO2_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO2_OC1) || \ + ((__SOURCE__) == TIM_TRGO2_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \ + ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASSYMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR12) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_ITR1) || \ + ((__SELECTION__) == TIM_TS_ITR2) || \ + ((__SELECTION__) == TIM_TS_ITR3) || \ + ((__SELECTION__) == TIM_TS_ITR4) || \ + ((__SELECTION__) == TIM_TS_ITR5) || \ + ((__SELECTION__) == TIM_TS_ITR6) || \ + ((__SELECTION__) == TIM_TS_ITR7) || \ + ((__SELECTION__) == TIM_TS_ITR8) || \ + ((__SELECTION__) == TIM_TS_ITR12) || \ + ((__SELECTION__) == TIM_TS_ITR13) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM_PARITY_ERROR) || \ + ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP)) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\ + (__HANDLE__)->ChannelState[5]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[4] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[5] = \ + (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ + (__HANDLE__)->ChannelNState[3]) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelNState[0] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[1] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[2] = \ + (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelNState[3] = \ + (__CHANNEL_STATE__); \ + } while(0) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32h7xx_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); + +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_TIM_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h new file mode 100644 index 0000000..ebad016 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h @@ -0,0 +1,533 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_TIM_EX_H +#define STM32H7xx_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal_def.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + +/** + * @brief TIM Hall sensor Configuration Structure definition + */ + +typedef struct +{ + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ +} TIM_HallSensor_InitTypeDef; +#if defined(TIM_BREAK_INPUT_SUPPORT) + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity + Not relevant when analog watchdog output of the DFSDM1 used as break input source */ +} TIMEx_BreakInputConfigTypeDef; + +#endif /* TIM_BREAK_INPUT_SUPPORT */ +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM1_ETR_GPIO 0x00000000U /*!< TIM1_ETR is connected to GPIO */ +#define TIM_TIM1_ETR_COMP1 TIM1_AF1_ETRSEL_0 /*!< TIM1_ETR is connected to COMP1 OUT */ +#define TIM_TIM1_ETR_COMP2 TIM1_AF1_ETRSEL_1 /*!< TIM1_ETR is connected to COMP2 OUT */ +#define TIM_TIM1_ETR_ADC1_AWD1 (TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD1 */ +#define TIM_TIM1_ETR_ADC1_AWD2 (TIM1_AF1_ETRSEL_2) /*!< TIM1_ETR is connected to ADC1 AWD2 */ +#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */ +#define TIM_TIM1_ETR_ADC3_AWD1 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /*!< TIM1_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM1_ETR_ADC3_AWD2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1 | TIM1_AF1_ETRSEL_0) /*!< TIM1_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM1_ETR_ADC3_AWD3 TIM1_AF1_ETRSEL_3 /*!< TIM1_ETR is connected to ADC3 AWD3 */ + +#define TIM_TIM8_ETR_GPIO 0x00000000U /*!< TIM8_ETR is connected to GPIO */ +#define TIM_TIM8_ETR_COMP1 TIM8_AF1_ETRSEL_0 /*!< TIM8_ETR is connected to COMP1 OUT */ +#define TIM_TIM8_ETR_COMP2 TIM8_AF1_ETRSEL_1 /*!< TIM8_ETR is connected to COMP2 OUT */ +#define TIM_TIM8_ETR_ADC2_AWD1 (TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM8_ETR is connected to ADC2 AWD1 */ +#define TIM_TIM8_ETR_ADC2_AWD2 (TIM8_AF1_ETRSEL_2) /*!< TIM8_ETR is connected to ADC2 AWD2 */ +#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /*!< TIM8_ETR is connected to ADC2 AWD3 */ +#define TIM_TIM8_ETR_ADC3_AWD1 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1) /*!< TIM8_ETR is connected to ADC3 AWD1 */ +#define TIM_TIM8_ETR_ADC3_AWD2 (TIM8_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM8_ETR is connected to ADC3 AWD2 */ +#define TIM_TIM8_ETR_ADC3_AWD3 TIM8_AF1_ETRSEL_3 /*!< TIM8_ETR is connected to ADC3 AWD3 */ + +#define TIM_TIM2_ETR_GPIO 0x00000000U /*!< TIM2_ETR is connected to GPIO */ +#define TIM_TIM2_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to COMP1 OUT */ +#define TIM_TIM2_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /*!< TIM2_ETR is connected to COMP2 OUT */ +#define TIM_TIM2_ETR_RCC_LSE (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to RCC LSE */ +#define TIM_TIM2_ETR_SAI1_FSA TIM2_AF1_ETRSEL_2 /*!< TIM2_ETR is connected to SAI1 FS_A */ +#define TIM_TIM2_ETR_SAI1_FSB (TIM2_AF1_ETRSEL_2 | TIM8_AF1_ETRSEL_0) /*!< TIM2_ETR is connected to SAI1 FS_B */ + +#define TIM_TIM3_ETR_GPIO 0x00000000U /*!< TIM3_ETR is connected to GPIO */ +#define TIM_TIM3_ETR_COMP1 TIM3_AF1_ETRSEL_0 /*!< TIM3_ETR is connected to COMP1 OUT */ + +#define TIM_TIM5_ETR_GPIO 0x00000000U /*!< TIM5_ETR is connected to GPIO */ +#define TIM_TIM5_ETR_SAI2_FSA TIM5_AF1_ETRSEL_0 /*!< TIM5_ETR is connected to SAI2 FS_A */ +#define TIM_TIM5_ETR_SAI2_FSB TIM5_AF1_ETRSEL_1 /*!< TIM5_ETR is connected to SAI2 FS_B */ +#define TIM_TIM5_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /*!< TIM5_ETR is connected to SAI4 FS_A */ +#define TIM_TIM5_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /*!< TIM5_ETR is connected to SAI4 FS_B */ + +#define TIM_TIM23_ETR_GPIO 0x00000000U /*!< TIM23_ETR is connected to GPIO */ +#define TIM_TIM23_ETR_COMP1 (TIM2_AF1_ETRSEL_0) /*!< TIM23_ETR is connected to COMP1 OUT */ +#define TIM_TIM23_ETR_COMP2 (TIM2_AF1_ETRSEL_1) /*!< TIM23_ETR is connected to COMP2 OUT */ + +#define TIM_TIM24_ETR_GPIO 0x00000000U /*!< TIM24_ETR is connected to GPIO */ +#define TIM_TIM24_ETR_SAI4_FSA TIM5_AF1_ETRSEL_0 /*!< TIM24_ETR is connected to SAI4 FS_A */ +#define TIM_TIM24_ETR_SAI4_FSB TIM5_AF1_ETRSEL_1 /*!< TIM24_ETR is connected to SAI4 FS_B */ +#define TIM_TIM24_ETR_SAI1_FSA (TIM2_AF1_ETRSEL_1 | TIM8_AF1_ETRSEL_0) /*!< TIM24_ETR is connected to SAI1 FS_A */ +#define TIM_TIM24_ETR_SAI1_FSB TIM2_AF1_ETRSEL_2 /*!< TIM24_ETR is connected to SAI1 FS_B */ +/** + * @} + */ +#if defined(TIM_BREAK_INPUT_SUPPORT) + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /*!< The COMP1 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /*!< The COMP2 output is connected to the break input */ +#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /*!< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ +#endif /* TIM_BREAK_INPUT_SUPPORT */ + +/** @defgroup TIMEx_Timer_Input_Selection TIM Extended Timer input selection + * @{ + */ +#define TIM_TIM1_TI1_GPIO 0x00000000U /*!< TIM1_TI1 is connected to GPIO */ +#define TIM_TIM1_TI1_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM1_TI1 is connected to COMP1 OUT */ + +#define TIM_TIM8_TI1_GPIO 0x00000000U /*!< TIM8_TI1 is connected to GPIO */ +#define TIM_TIM8_TI1_COMP2 TIM_TISEL_TI1SEL_0 /*!< TIM8_TI1 is connected to COMP2 OUT */ + +#define TIM_TIM2_TI4_GPIO 0x00000000U /*!< TIM2_TI4 is connected to GPIO */ +#define TIM_TIM2_TI4_COMP1 TIM_TISEL_TI4SEL_0 /*!< TIM2_TI4 is connected to COMP1 OUT */ +#define TIM_TIM2_TI4_COMP2 TIM_TISEL_TI4SEL_1 /*!< TIM2_TI4 is connected to COMP2 OUT */ +#define TIM_TIM2_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /*!< TIM2_TI4 is connected to COMP2 OUT OR COMP2 OUT */ + +#define TIM_TIM3_TI1_GPIO 0x00000000U /*!< TIM3_TI1 is connected to GPIO */ +#define TIM_TIM3_TI1_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM3_TI1 is connected to COMP1 OUT */ +#define TIM_TIM3_TI1_COMP2 TIM_TISEL_TI1SEL_1 /*!< TIM3_TI1 is connected to COMP2 OUT */ +#define TIM_TIM3_TI1_COMP1_COMP2 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM3_TI1 is connected to COMP1 OUT or COMP2 OUT */ + +#define TIM_TIM5_TI1_GPIO 0x00000000U /*!< TIM5_TI1 is connected to GPIO */ +#define TIM_TIM5_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /*!< TIM5_TI1 is connected to CAN TMP */ +#define TIM_TIM5_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /*!< TIM5_TI1 is connected to CAN RTP */ + +#define TIM_TIM12_TI1_GPIO 0x00000000U /*!< TIM12 TI1 is connected to GPIO */ +#define TIM_TIM12_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /*!< TIM12 TI1 is connected to SPDIF FS */ + +#define TIM_TIM15_TI1_GPIO 0x00000000U /*!< TIM15_TI1 is connected to GPIO */ +#define TIM_TIM15_TI1_TIM2_CH1 TIM_TISEL_TI1SEL_0 /*!< TIM15_TI1 is connected to TIM2 CH1 */ +#define TIM_TIM15_TI1_TIM3_CH1 TIM_TISEL_TI1SEL_1 /*!< TIM15_TI1 is connected to TIM3 CH1 */ +#define TIM_TIM15_TI1_TIM4_CH1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM15_TI1 is connected to TIM4 CH1 */ +#define TIM_TIM15_TI1_RCC_LSE (TIM_TISEL_TI1SEL_2) /*!< TIM15_TI1 is connected to RCC LSE */ +#define TIM_TIM15_TI1_RCC_CSI (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_0) /*!< TIM15_TI1 is connected to RCC CSI */ +#define TIM_TIM15_TI1_RCC_MCO2 (TIM_TISEL_TI1SEL_2 | TIM_TISEL_TI1SEL_1) /*!< TIM15_TI1 is connected to RCC MCO2 */ + +#define TIM_TIM15_TI2_GPIO 0x00000000U /*!< TIM15_TI2 is connected to GPIO */ +#define TIM_TIM15_TI2_TIM2_CH2 (TIM_TISEL_TI2SEL_0) /*!< TIM15_TI2 is connected to TIM2 CH2 */ +#define TIM_TIM15_TI2_TIM3_CH2 (TIM_TISEL_TI2SEL_1) /*!< TIM15_TI2 is connected to TIM3 CH2 */ +#define TIM_TIM15_TI2_TIM4_CH2 (TIM_TISEL_TI2SEL_0 | TIM_TISEL_TI2SEL_1) /*!< TIM15_TI2 is connected to TIM4 CH2 */ + +#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16 TI1 is connected to GPIO */ +#define TIM_TIM16_TI1_RCC_LSI TIM_TISEL_TI1SEL_0 /*!< TIM16 TI1 is connected to RCC LSI */ +#define TIM_TIM16_TI1_RCC_LSE TIM_TISEL_TI1SEL_1 /*!< TIM16 TI1 is connected to RCC LSE */ +#define TIM_TIM16_TI1_WKUP_IT (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM16 TI1 is connected to WKUP_IT */ + +#define TIM_TIM17_TI1_GPIO 0x00000000U /*!< TIM17 TI1 is connected to GPIO */ +#define TIM_TIM17_TI1_SPDIF_FS TIM_TISEL_TI1SEL_0 /*!< TIM17 TI1 is connected to SPDIF FS */ +#define TIM_TIM17_TI1_RCC_HSE1MHZ TIM_TISEL_TI1SEL_1 /*!< TIM17 TI1 is connected to RCC HSE 1Mhz */ +#define TIM_TIM17_TI1_RCC_MCO1 (TIM_TISEL_TI1SEL_0 | TIM_TISEL_TI1SEL_1) /*!< TIM17 TI1 is connected to RCC MCO1 */ + +#define TIM_TIM23_TI4_GPIO 0x00000000U /*!< TIM23_TI4 is connected to GPIO */ +#define TIM_TIM23_TI4_COMP1 TIM_TISEL_TI4SEL_0 /*!< TIM23_TI4 is connected to COMP1 OUT */ +#define TIM_TIM23_TI4_COMP2 TIM_TISEL_TI4SEL_1 /*!< TIM23_TI4 is connected to COMP2 OUT */ +#define TIM_TIM23_TI4_COMP1_COMP2 (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /*!< TIM23_TI4 is connected to COMP1 OUT or COMP2 OUT */ + +#define TIM_TIM24_TI1_GPIO 0x00000000U /*!< TIM24_TI1 is connected to GPIO */ +#define TIM_TIM24_TI1_CAN_TMP TIM_TISEL_TI1SEL_0 /*!< TIM24_TI1 is connected to CAN TMP */ +#define TIM_TIM24_TI1_CAN_RTP TIM_TISEL_TI1SEL_1 /*!< TIM24_TI1 is connected to CAN RTP */ +#define TIM_TIM24_TI1_CAN_SOC (TIM_TISEL_TI4SEL_0 | TIM_TISEL_TI4SEL_1) /*!< TIM24_TI1 is connected to CAN SOC */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \ + ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2)) + +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1)) + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_TISEL(__TISEL__) (((__TISEL__) == TIM_TIM1_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM1_TI1_COMP1) ||\ + ((__TISEL__) == TIM_TIM8_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM8_TI1_COMP2) ||\ + ((__TISEL__) == TIM_TIM2_TI4_GPIO) ||\ + ((__TISEL__) == TIM_TIM2_TI4_COMP1) ||\ + ((__TISEL__) == TIM_TIM2_TI4_COMP2) ||\ + ((__TISEL__) == TIM_TIM2_TI4_COMP1_COMP2) ||\ + ((__TISEL__) == TIM_TIM3_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM3_TI1_COMP1) ||\ + ((__TISEL__) == TIM_TIM3_TI1_COMP2) ||\ + ((__TISEL__) == TIM_TIM3_TI1_COMP1_COMP2) ||\ + ((__TISEL__) == TIM_TIM5_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM5_TI1_CAN_TMP) ||\ + ((__TISEL__) == TIM_TIM5_TI1_CAN_RTP) ||\ + ((__TISEL__) == TIM_TIM12_TI1_SPDIF_FS) ||\ + ((__TISEL__) == TIM_TIM12_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM15_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM15_TI1_TIM2_CH1) ||\ + ((__TISEL__) == TIM_TIM15_TI1_TIM3_CH1) ||\ + ((__TISEL__) == TIM_TIM15_TI1_TIM4_CH1) ||\ + ((__TISEL__) == TIM_TIM15_TI1_RCC_LSE) ||\ + ((__TISEL__) == TIM_TIM15_TI1_RCC_CSI) ||\ + ((__TISEL__) == TIM_TIM15_TI1_RCC_MCO2) ||\ + ((__TISEL__) == TIM_TIM15_TI2_GPIO) ||\ + ((__TISEL__) == TIM_TIM15_TI2_TIM2_CH2) ||\ + ((__TISEL__) == TIM_TIM15_TI2_TIM3_CH2) ||\ + ((__TISEL__) == TIM_TIM15_TI2_TIM4_CH2) ||\ + ((__TISEL__) == TIM_TIM16_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM16_TI1_RCC_LSI) ||\ + ((__TISEL__) == TIM_TIM16_TI1_RCC_LSE) ||\ + ((__TISEL__) == TIM_TIM16_TI1_WKUP_IT) ||\ + ((__TISEL__) == TIM_TIM17_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM17_TI1_SPDIF_FS) ||\ + ((__TISEL__) == TIM_TIM17_TI1_RCC_HSE1MHZ) ||\ + ((__TISEL__) == TIM_TIM17_TI1_RCC_MCO1) ||\ + ((__TISEL__) == TIM_TIM23_TI4_GPIO) ||\ + ((__TISEL__) == TIM_TIM23_TI4_COMP1) ||\ + ((__TISEL__) == TIM_TIM23_TI4_COMP2) ||\ + ((__TISEL__) == TIM_TIM23_TI4_COMP1_COMP2) ||\ + ((__TISEL__) == TIM_TIM24_TI1_GPIO) ||\ + ((__TISEL__) == TIM_TIM24_TI1_CAN_TMP) ||\ + ((__TISEL__) == TIM_TIM24_TI1_CAN_RTP) ||\ + ((__TISEL__) == TIM_TIM24_TI1_CAN_SOC)) + +#define IS_TIM_REMAP(__RREMAP__) (((__RREMAP__) == TIM_TIM1_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD1) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD2) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC1_AWD3) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD1) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD2) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_ADC3_AWD3) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM1_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD1) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD2) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC2_AWD3) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD1) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD2) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_ADC3_AWD3) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM8_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_RCC_LSE) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSA) ||\ + ((__RREMAP__) == TIM_TIM2_ETR_SAI1_FSB) ||\ + ((__RREMAP__) == TIM_TIM3_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM3_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM5_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSA) ||\ + ((__RREMAP__) == TIM_TIM5_ETR_SAI2_FSB) ||\ + ((__RREMAP__) == TIM_TIM23_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM23_ETR_COMP1) ||\ + ((__RREMAP__) == TIM_TIM23_ETR_COMP2) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_GPIO) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSA) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI4_FSB) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSA) ||\ + ((__RREMAP__) == TIM_TIM24_ETR_SAI1_FSB)) + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * @{ + */ +/* Timer Hall Sensor functions **********************************************/ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); + +void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +#if defined(TIM_BREAK_INPUT_SUPPORT) +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +#endif /* TIM_BREAK_INPUT_SUPPORT */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel); +#if defined(TIM_BDTR_BKBID) + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +#endif /* TIM_BDTR_BKBID */ +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32H7xx_HAL_TIM_EX_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h new file mode 100644 index 0000000..4f15c6e --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_bus.h @@ -0,0 +1,6914 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_BUS_H +#define STM32H7xx_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH + * @{ + */ +#define LL_AHB3_GRP1_PERIPH_MDMA RCC_AHB3ENR_MDMAEN +#define LL_AHB3_GRP1_PERIPH_DMA2D RCC_AHB3ENR_DMA2DEN + +#if defined(JPEG) +#define LL_AHB3_GRP1_PERIPH_JPGDEC RCC_AHB3ENR_JPGDECEN +#endif /* JPEG */ + +#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN +#if defined(QUADSPI) +#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) +#define LL_AHB3_GRP1_PERIPH_OSPI1 RCC_AHB3ENR_OSPI1EN +#define LL_AHB3_GRP1_PERIPH_OSPI2 RCC_AHB3ENR_OSPI2EN +#endif /*(OCTOSPI1) || (OCTOSPI2)*/ +#if defined(OCTOSPIM) +#define LL_AHB3_GRP1_PERIPH_OCTOSPIM RCC_AHB3ENR_IOMNGREN +#endif /* OCTOSPIM */ +#if defined(OTFDEC1) || defined(OTFDEC2) +#define LL_AHB3_GRP1_PERIPH_OTFDEC1 RCC_AHB3ENR_OTFDEC1EN +#define LL_AHB3_GRP1_PERIPH_OTFDEC2 RCC_AHB3ENR_OTFDEC2EN +#endif /* (OTFDEC1) || (OTFDEC2) */ +#if defined(GFXMMU) +#define LL_AHB3_GRP1_PERIPH_GFXMMU RCC_AHB3ENR_GFXMMUEN +#endif /* GFXMMU */ +#define LL_AHB3_GRP1_PERIPH_SDMMC1 RCC_AHB3ENR_SDMMC1EN +#define LL_AHB3_GRP1_PERIPH_FLASH RCC_AHB3LPENR_FLASHLPEN +#define LL_AHB3_GRP1_PERIPH_DTCM1 RCC_AHB3LPENR_DTCM1LPEN +#define LL_AHB3_GRP1_PERIPH_DTCM2 RCC_AHB3LPENR_DTCM2LPEN +#define LL_AHB3_GRP1_PERIPH_ITCM RCC_AHB3LPENR_ITCMLPEN +#if defined(RCC_AHB3LPENR_AXISRAMLPEN) +#define LL_AHB3_GRP1_PERIPH_AXISRAM RCC_AHB3LPENR_AXISRAMLPEN +#else +#define LL_AHB3_GRP1_PERIPH_AXISRAM1 RCC_AHB3LPENR_AXISRAM1LPEN +#define LL_AHB3_GRP1_PERIPH_AXISRAM LL_AHB3_GRP1_PERIPH_AXISRAM1 /* for backward compatibility*/ +#endif /* RCC_AHB3LPENR_AXISRAMLPEN */ +#if defined(CD_AXISRAM2_BASE) +#define LL_AHB3_GRP1_PERIPH_AXISRAM2 RCC_AHB3LPENR_AXISRAM2LPEN +#endif /* CD_AXISRAM2_BASE */ +#if defined(CD_AXISRAM3_BASE) +#define LL_AHB3_GRP1_PERIPH_AXISRAM3 RCC_AHB3LPENR_AXISRAM3LPEN +#endif /* CD_AXISRAM3_BASE */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN +#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN +#define LL_AHB1_GRP1_PERIPH_ADC12 RCC_AHB1ENR_ADC12EN +#if defined(DUAL_CORE) +#define LL_AHB1_GRP1_PERIPH_ART RCC_AHB1ENR_ARTEN +#endif /* DUAL_CORE */ +#if defined(RCC_AHB1ENR_CRCEN) +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN +#endif /* RCC_AHB1ENR_CRCEN */ +#if defined(ETH) +#define LL_AHB1_GRP1_PERIPH_ETH1MAC RCC_AHB1ENR_ETH1MACEN +#define LL_AHB1_GRP1_PERIPH_ETH1TX RCC_AHB1ENR_ETH1TXEN +#define LL_AHB1_GRP1_PERIPH_ETH1RX RCC_AHB1ENR_ETH1RXEN +#endif /* ETH */ +#define LL_AHB1_GRP1_PERIPH_USB1OTGHS RCC_AHB1ENR_USB1OTGHSEN +#define LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI RCC_AHB1ENR_USB1OTGHSULPIEN +#if defined(USB2_OTG_FS) +#define LL_AHB1_GRP1_PERIPH_USB2OTGHS RCC_AHB1ENR_USB2OTGHSEN +#define LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI RCC_AHB1ENR_USB2OTGHSULPIEN +#endif /* USB2_OTG_FS */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH + * @{ + */ +#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN +#if defined(HSEM) && defined(RCC_AHB2ENR_HSEMEN) +#define LL_AHB2_GRP1_PERIPH_HSEM RCC_AHB2ENR_HSEMEN +#endif /* HSEM && RCC_AHB2ENR_HSEMEN */ +#if defined(CRYP) +#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN +#endif /* CRYP */ +#if defined(HASH) +#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN +#endif /* HASH */ +#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN +#define LL_AHB2_GRP1_PERIPH_SDMMC2 RCC_AHB2ENR_SDMMC2EN +#if defined(FMAC) +#define LL_AHB2_GRP1_PERIPH_FMAC RCC_AHB2ENR_FMACEN +#endif /* FMAC */ +#if defined(CORDIC) +#define LL_AHB2_GRP1_PERIPH_CORDIC RCC_AHB2ENR_CORDICEN +#endif /* CORDIC */ +#if defined(BDMA1) +#define LL_AHB2_GRP1_PERIPH_BDMA1 RCC_AHB2ENR_BDMA1EN +#endif /* BDMA1 */ +#if defined(RCC_AHB2ENR_D2SRAM1EN) +#define LL_AHB2_GRP1_PERIPH_D2SRAM1 RCC_AHB2ENR_D2SRAM1EN +#else +#define LL_AHB2_GRP1_PERIPH_AHBSRAM1 RCC_AHB2ENR_AHBSRAM1EN +#define LL_AHB2_GRP1_PERIPH_D2SRAM1 LL_AHB2_GRP1_PERIPH_AHBSRAM1 /* for backward compatibility*/ +#endif /* RCC_AHB2ENR_D2SRAM1EN */ +#if defined(RCC_AHB2ENR_D2SRAM2EN) +#define LL_AHB2_GRP1_PERIPH_D2SRAM2 RCC_AHB2ENR_D2SRAM2EN +#else +#define LL_AHB2_GRP1_PERIPH_AHBSRAM2 RCC_AHB2ENR_AHBSRAM2EN +#define LL_AHB2_GRP1_PERIPH_D2SRAM2 LL_AHB2_GRP1_PERIPH_AHBSRAM2 /* for backward compatibility*/ +#endif /* RCC_AHB2ENR_D2SRAM2EN */ +#if defined(RCC_AHB2ENR_D2SRAM3EN) +#define LL_AHB2_GRP1_PERIPH_D2SRAM3 RCC_AHB2ENR_D2SRAM3EN +#endif /* RCC_AHB2ENR_D2SRAM3EN */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_AHB4_GRP1_PERIPH AHB4 GRP1 PERIPH + * @{ + */ +#define LL_AHB4_GRP1_PERIPH_GPIOA RCC_AHB4ENR_GPIOAEN +#define LL_AHB4_GRP1_PERIPH_GPIOB RCC_AHB4ENR_GPIOBEN +#define LL_AHB4_GRP1_PERIPH_GPIOC RCC_AHB4ENR_GPIOCEN +#define LL_AHB4_GRP1_PERIPH_GPIOD RCC_AHB4ENR_GPIODEN +#define LL_AHB4_GRP1_PERIPH_GPIOE RCC_AHB4ENR_GPIOEEN +#define LL_AHB4_GRP1_PERIPH_GPIOF RCC_AHB4ENR_GPIOFEN +#define LL_AHB4_GRP1_PERIPH_GPIOG RCC_AHB4ENR_GPIOGEN +#define LL_AHB4_GRP1_PERIPH_GPIOH RCC_AHB4ENR_GPIOHEN +#if defined(GPIOI) +#define LL_AHB4_GRP1_PERIPH_GPIOI RCC_AHB4ENR_GPIOIEN +#endif /* GPIOI */ +#define LL_AHB4_GRP1_PERIPH_GPIOJ RCC_AHB4ENR_GPIOJEN +#define LL_AHB4_GRP1_PERIPH_GPIOK RCC_AHB4ENR_GPIOKEN +#if defined(RCC_AHB4ENR_CRCEN) +#define LL_AHB4_GRP1_PERIPH_CRC RCC_AHB4ENR_CRCEN +#endif /* RCC_AHB4ENR_CRCEN */ +#if defined(BDMA2) +#define LL_AHB4_GRP1_PERIPH_BDMA2 RCC_AHB4ENR_BDMA2EN +#define LL_AHB4_GRP1_PERIPH_BDMA LL_AHB4_GRP1_PERIPH_BDMA2 /* for backward compatibility*/ +#else +#define LL_AHB4_GRP1_PERIPH_BDMA RCC_AHB4ENR_BDMAEN +#endif /* BDMA2 */ +#if defined(ADC3) +#define LL_AHB4_GRP1_PERIPH_ADC3 RCC_AHB4ENR_ADC3EN +#endif /* ADC3 */ +#if defined(HSEM) && defined(RCC_AHB4ENR_HSEMEN) +#define LL_AHB4_GRP1_PERIPH_HSEM RCC_AHB4ENR_HSEMEN +#endif /* HSEM && RCC_AHB4ENR_HSEMEN*/ +#define LL_AHB4_GRP1_PERIPH_BKPRAM RCC_AHB4ENR_BKPRAMEN +#if defined(RCC_AHB4LPENR_SRAM4LPEN) +#define LL_AHB4_GRP1_PERIPH_SRAM4 RCC_AHB4LPENR_SRAM4LPEN +#define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRAM4 +#else +#define LL_AHB4_GRP1_PERIPH_SRDSRAM RCC_AHB4ENR_SRDSRAMEN +#define LL_AHB4_GRP1_PERIPH_SRAM4 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/ +#define LL_AHB4_GRP1_PERIPH_D3SRAM1 LL_AHB4_GRP1_PERIPH_SRDSRAM /* for backward compatibility*/ +#endif /* RCC_AHB4ENR_D3SRAM1EN */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB3_GRP1_PERIPH APB3 GRP1 PERIPH + * @{ + */ +#if defined(LTDC) +#define LL_APB3_GRP1_PERIPH_LTDC RCC_APB3ENR_LTDCEN +#endif /* LTDC */ +#if defined(DSI) +#define LL_APB3_GRP1_PERIPH_DSI RCC_APB3ENR_DSIEN +#endif /* DSI */ +#define LL_APB3_GRP1_PERIPH_WWDG1 RCC_APB3ENR_WWDG1EN +#if defined(RCC_APB3ENR_WWDGEN) +#define LL_APB3_GRP1_PERIPH_WWDG LL_APB3_GRP1_PERIPH_WWDG1 /* for backward compatibility*/ +#endif /* RCC_APB3ENR_WWDGEN */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1LENR_TIM2EN +#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1LENR_TIM3EN +#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1LENR_TIM4EN +#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1LENR_TIM5EN +#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1LENR_TIM6EN +#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1LENR_TIM7EN +#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1LENR_TIM12EN +#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1LENR_TIM13EN +#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1LENR_TIM14EN +#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1LENR_LPTIM1EN +#if defined(DUAL_CORE) +#define LL_APB1_GRP1_PERIPH_WWDG2 RCC_APB1LENR_WWDG2EN +#endif /*DUAL_CORE*/ +#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1LENR_SPI2EN +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1LENR_SPI3EN +#define LL_APB1_GRP1_PERIPH_SPDIFRX RCC_APB1LENR_SPDIFRXEN +#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1LENR_USART2EN +#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1LENR_USART3EN +#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1LENR_UART4EN +#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1LENR_UART5EN +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1LENR_I2C1EN +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1LENR_I2C2EN +#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1LENR_I2C3EN +#if defined(I2C5) +#define LL_APB1_GRP1_PERIPH_I2C5 RCC_APB1LENR_I2C5EN +#endif /* I2C5 */ +#if defined(RCC_APB1LENR_CECEN) +#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1LENR_CECEN +#else +#define LL_APB1_GRP1_PERIPH_HDMICEC RCC_APB1LENR_HDMICECEN +#define LL_APB1_GRP1_PERIPH_CEC LL_APB1_GRP1_PERIPH_HDMICEC /* for backward compatibility*/ +#endif /* RCC_APB1LENR_CECEN */ +#define LL_APB1_GRP1_PERIPH_DAC12 RCC_APB1LENR_DAC12EN +#define LL_APB1_GRP1_PERIPH_UART7 RCC_APB1LENR_UART7EN +#define LL_APB1_GRP1_PERIPH_UART8 RCC_APB1LENR_UART8EN +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH + * @{ + */ +#define LL_APB1_GRP2_PERIPH_CRS RCC_APB1HENR_CRSEN +#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1HENR_SWPMIEN +#define LL_APB1_GRP2_PERIPH_OPAMP RCC_APB1HENR_OPAMPEN +#define LL_APB1_GRP2_PERIPH_MDIOS RCC_APB1HENR_MDIOSEN +#define LL_APB1_GRP2_PERIPH_FDCAN RCC_APB1HENR_FDCANEN +#if defined(TIM23) +#define LL_APB1_GRP2_PERIPH_TIM23 RCC_APB1HENR_TIM23EN +#endif /* TIM23 */ +#if defined(TIM24) +#define LL_APB1_GRP2_PERIPH_TIM24 RCC_APB1HENR_TIM24EN +#endif /* TIM24 */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH + * @{ + */ +#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN +#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN +#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN +#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN +#if defined(UART9) +#define LL_APB2_GRP1_PERIPH_UART9 RCC_APB2ENR_UART9EN +#endif /* UART9 */ +#if defined(USART10) +#define LL_APB2_GRP1_PERIPH_USART10 RCC_APB2ENR_USART10EN +#endif /* USART10 */ +#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN +#define LL_APB2_GRP1_PERIPH_SPI4 RCC_APB2ENR_SPI4EN +#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN +#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN +#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN +#define LL_APB2_GRP1_PERIPH_SPI5 RCC_APB2ENR_SPI5EN +#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN +#if defined(SAI2) +#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN +#endif /* SAI2 */ +#if defined(SAI3) +#define LL_APB2_GRP1_PERIPH_SAI3 RCC_APB2ENR_SAI3EN +#endif /* SAI3 */ +#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN +#if defined(HRTIM1) +#define LL_APB2_GRP1_PERIPH_HRTIM RCC_APB2ENR_HRTIMEN +#endif /* HRTIM1 */ +/** + * @} + */ + + +/** @defgroup BUS_LL_EC_APB4_GRP1_PERIPH APB4 GRP1 PERIPH + * @{ + */ +#define LL_APB4_GRP1_PERIPH_SYSCFG RCC_APB4ENR_SYSCFGEN +#define LL_APB4_GRP1_PERIPH_LPUART1 RCC_APB4ENR_LPUART1EN +#define LL_APB4_GRP1_PERIPH_SPI6 RCC_APB4ENR_SPI6EN +#define LL_APB4_GRP1_PERIPH_I2C4 RCC_APB4ENR_I2C4EN +#define LL_APB4_GRP1_PERIPH_LPTIM2 RCC_APB4ENR_LPTIM2EN +#define LL_APB4_GRP1_PERIPH_LPTIM3 RCC_APB4ENR_LPTIM3EN +#if defined(LPTIM4) +#define LL_APB4_GRP1_PERIPH_LPTIM4 RCC_APB4ENR_LPTIM4EN +#endif /* LPTIM4 */ +#if defined(LPTIM5) +#define LL_APB4_GRP1_PERIPH_LPTIM5 RCC_APB4ENR_LPTIM5EN +#endif /* LPTIM5 */ +#if defined(DAC2) +#define LL_APB4_GRP1_PERIPH_DAC2 RCC_APB4ENR_DAC2EN +#endif /* DAC2 */ +#define LL_APB4_GRP1_PERIPH_COMP12 RCC_APB4ENR_COMP12EN +#define LL_APB4_GRP1_PERIPH_VREF RCC_APB4ENR_VREFEN +#define LL_APB4_GRP1_PERIPH_RTCAPB RCC_APB4ENR_RTCAPBEN +#if defined(SAI4) +#define LL_APB4_GRP1_PERIPH_SAI4 RCC_APB4ENR_SAI4EN +#endif /* SAI4 */ +#if defined(DTS) +#define LL_APB4_GRP1_PERIPH_DTS RCC_APB4ENR_DTSEN +#endif /*DTS*/ +#if defined(DFSDM2_BASE) +#define LL_APB4_GRP1_PERIPH_DFSDM2 RCC_APB4ENR_DFSDM2EN +#endif /* DFSDM2_BASE */ +/** + * @} + */ + +/** @defgroup BUS_LL_EC_CLKAM_PERIPH CLKAM PERIPH + * @{ + */ +#if defined(RCC_D3AMR_BDMAAMEN) +#define LL_CLKAM_PERIPH_BDMA RCC_D3AMR_BDMAAMEN +#else +#define LL_CLKAM_PERIPH_BDMA2 RCC_SRDAMR_BDMA2AMEN +#define LL_CLKAM_PERIPH_BDMA LL_CLKAM_PERIPH_BDMA2 /* for backward compatibility*/ +#endif /* RCC_D3AMR_BDMAAMEN */ +#if defined(RCC_SRDAMR_GPIOAMEN) +#define LL_CLKAM_PERIPH_GPIO RCC_SRDAMR_GPIOAMEN +#endif /* RCC_SRDAMR_GPIOAMEN */ +#if defined(RCC_D3AMR_LPUART1AMEN) +#define LL_CLKAM_PERIPH_LPUART1 RCC_D3AMR_LPUART1AMEN +#else +#define LL_CLKAM_PERIPH_LPUART1 RCC_SRDAMR_LPUART1AMEN +#endif /* RCC_D3AMR_LPUART1AMEN */ +#if defined(RCC_D3AMR_SPI6AMEN) +#define LL_CLKAM_PERIPH_SPI6 RCC_D3AMR_SPI6AMEN +#else +#define LL_CLKAM_PERIPH_SPI6 RCC_SRDAMR_SPI6AMEN +#endif /* RCC_D3AMR_SPI6AMEN */ +#if defined(RCC_D3AMR_I2C4AMEN) +#define LL_CLKAM_PERIPH_I2C4 RCC_D3AMR_I2C4AMEN +#else +#define LL_CLKAM_PERIPH_I2C4 RCC_SRDAMR_I2C4AMEN +#endif /* RCC_D3AMR_I2C4AMEN */ +#if defined(RCC_D3AMR_LPTIM2AMEN) +#define LL_CLKAM_PERIPH_LPTIM2 RCC_D3AMR_LPTIM2AMEN +#else +#define LL_CLKAM_PERIPH_LPTIM2 RCC_SRDAMR_LPTIM2AMEN +#endif /* RCC_D3AMR_LPTIM2AMEN */ +#if defined(RCC_D3AMR_LPTIM3AMEN) +#define LL_CLKAM_PERIPH_LPTIM3 RCC_D3AMR_LPTIM3AMEN +#else +#define LL_CLKAM_PERIPH_LPTIM3 RCC_SRDAMR_LPTIM3AMEN +#endif /* RCC_D3AMR_LPTIM3AMEN */ +#if defined(RCC_D3AMR_LPTIM4AMEN) +#define LL_CLKAM_PERIPH_LPTIM4 RCC_D3AMR_LPTIM4AMEN +#endif /* RCC_D3AMR_LPTIM4AMEN */ +#if defined(RCC_D3AMR_LPTIM5AMEN) +#define LL_CLKAM_PERIPH_LPTIM5 RCC_D3AMR_LPTIM5AMEN +#endif /* RCC_D3AMR_LPTIM5AMEN */ +#if defined(DAC2) +#define LL_CLKAM_PERIPH_DAC2 RCC_SRDAMR_DAC2AMEN +#endif /* DAC2 */ +#if defined(RCC_D3AMR_COMP12AMEN) +#define LL_CLKAM_PERIPH_COMP12 RCC_D3AMR_COMP12AMEN +#else +#define LL_CLKAM_PERIPH_COMP12 RCC_SRDAMR_COMP12AMEN +#endif /* RCC_D3AMR_COMP12AMEN */ +#if defined(RCC_D3AMR_VREFAMEN) +#define LL_CLKAM_PERIPH_VREF RCC_D3AMR_VREFAMEN +#else +#define LL_CLKAM_PERIPH_VREF RCC_SRDAMR_VREFAMEN +#endif /* RCC_D3AMR_VREFAMEN */ +#if defined(RCC_D3AMR_RTCAMEN) +#define LL_CLKAM_PERIPH_RTC RCC_D3AMR_RTCAMEN +#else +#define LL_CLKAM_PERIPH_RTC RCC_SRDAMR_RTCAMEN +#endif /* RCC_D3AMR_RTCAMEN */ +#if defined(RCC_D3AMR_CRCAMEN) +#define LL_CLKAM_PERIPH_CRC RCC_D3AMR_CRCAMEN +#endif /* RCC_D3AMR_CRCAMEN */ +#if defined(SAI4) +#define LL_CLKAM_PERIPH_SAI4 RCC_D3AMR_SAI4AMEN +#endif /* SAI4 */ +#if defined(ADC3) +#define LL_CLKAM_PERIPH_ADC3 RCC_D3AMR_ADC3AMEN +#endif /* ADC3 */ +#if defined(RCC_SRDAMR_DTSAMEN) +#define LL_CLKAM_PERIPH_DTS RCC_SRDAMR_DTSAMEN +#endif /* RCC_SRDAMR_DTSAMEN */ +#if defined(RCC_D3AMR_DTSAMEN) +#define LL_CLKAM_PERIPH_DTS RCC_D3AMR_DTSAMEN +#endif /* RCC_D3AMR_DTSAMEN */ +#if defined(DFSDM2_BASE) +#define LL_CLKAM_PERIPH_DFSDM2 RCC_SRDAMR_DFSDM2AMEN +#endif /* DFSDM2_BASE */ +#if defined(RCC_D3AMR_BKPRAMAMEN) +#define LL_CLKAM_PERIPH_BKPRAM RCC_D3AMR_BKPRAMAMEN +#else +#define LL_CLKAM_PERIPH_BKPRAM RCC_SRDAMR_BKPRAMAMEN +#endif /* RCC_D3AMR_BKPRAMAMEN */ +#if defined(RCC_D3AMR_SRAM4AMEN) +#define LL_CLKAM_PERIPH_SRAM4 RCC_D3AMR_SRAM4AMEN +#else +#define LL_CLKAM_PERIPH_SRDSRAM RCC_SRDAMR_SRDSRAMAMEN +#define LL_CLKAM_PERIPH_SRAM4 LL_CLKAM_PERIPH_SRDSRAM +#endif /* RCC_D3AMR_SRAM4AMEN */ +/** + * @} + */ + +#if defined(RCC_CKGAENR_AXICKG) +/** @defgroup BUS_LL_EC_CKGA_PERIPH CKGA (AXI Clocks Gating) PERIPH + * @{ + */ +#define LL_CKGA_PERIPH_AXI RCC_CKGAENR_AXICKG +#define LL_CKGA_PERIPH_AHB RCC_CKGAENR_AHBCKG +#define LL_CKGA_PERIPH_CPU RCC_CKGAENR_CPUCKG +#define LL_CKGA_PERIPH_SDMMC RCC_CKGAENR_SDMMCCKG +#define LL_CKGA_PERIPH_MDMA RCC_CKGAENR_MDMACKG +#define LL_CKGA_PERIPH_DMA2D RCC_CKGAENR_DMA2DCKG +#define LL_CKGA_PERIPH_LTDC RCC_CKGAENR_LTDCCKG +#define LL_CKGA_PERIPH_GFXMMUM RCC_CKGAENR_GFXMMUMCKG +#define LL_CKGA_PERIPH_AHB12 RCC_CKGAENR_AHB12CKG +#define LL_CKGA_PERIPH_AHB34 RCC_CKGAENR_AHB34CKG +#define LL_CKGA_PERIPH_FLIFT RCC_CKGAENR_FLIFTCKG +#define LL_CKGA_PERIPH_OCTOSPI2 RCC_CKGAENR_OCTOSPI2CKG +#define LL_CKGA_PERIPH_FMC RCC_CKGAENR_FMCCKG +#define LL_CKGA_PERIPH_OCTOSPI1 RCC_CKGAENR_OCTOSPI1CKG +#define LL_CKGA_PERIPH_AXIRAM1 RCC_CKGAENR_AXIRAM1CKG +#define LL_CKGA_PERIPH_AXIRAM2 RCC_CKGAENR_AXIRAM2CKG +#define LL_CKGA_PERIPH_AXIRAM3 RCC_CKGAENR_AXIRAM3CKG +#define LL_CKGA_PERIPH_GFXMMUS RCC_CKGAENR_GFXMMUSCKG +#define LL_CKGA_PERIPH_ECCRAM RCC_CKGAENR_ECCRAMCKG +#define LL_CKGA_PERIPH_EXTI RCC_CKGAENR_EXTICKG +#define LL_CKGA_PERIPH_JTAG RCC_CKGAENR_JTAGCKG +/** + * @} + */ +#endif /* RCC_CKGAENR_AXICKG */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR DMA2DEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR JPGDECEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI1EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI2EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR IOMNGREN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR GFXMMUEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR SDMMC1EN LL_AHB3_GRP1_EnableClock\n + * AHB3ENR FLASHEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR DTCM1EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR DTCM2EN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR ITCMEN LL_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR AXISRAMEN LL_AHB3_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DMA2DEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR JPGDECEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI1EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI2EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR IOMNGREN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR GFXMMUEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR SDMMC1EN LL_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FLASHEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR DTCM1EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR DTCM2EN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR ITCMEN LL_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR AXISRAMEN LL_AHB3_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR DMA2DEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR JPGDECEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI2EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR IOMNGREN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC2EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR GFXMMUEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR SDMMC1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR FLASHEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR DTCM1EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR DTCM2EN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR ITCMEN LL_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR AXISRAMEN LL_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3ENR, Periphs); +} + +/** + * @brief Force AHB3 peripherals reset. + * @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR DMA2DRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR JPGDECRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR GFXMMURST LL_AHB3_GRP1_ForceReset\n (*) + * AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Release AHB3 peripherals reset. + * @rmtoll AHB3RSTR MDMARST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR DMA2DRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR JPGDECRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset\n + * AHB3RSTR OSPI1RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR OSPI2RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR IOMNGRRST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR OTFDEC1RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR OTFDEC2RST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR GFXMMURST LL_AHB3_GRP1_ReleaseReset\n (*) + * AHB3RSTR SDMMC1RST LL_AHB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3RSTR, Periphs); +} + +/** + * @brief Enable AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FMCLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR QSPILPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FLASHLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR ITCMLPEN LL_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FMCLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR QSPILPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR OSPI1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FLASHLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR ITCMLPEN LL_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR ARTEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ARTEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR ARTEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1MACEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1TXEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1RXEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSEN LL_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_AHB1_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1ENR, Periphs); +} + +/** + * @brief Force AHB1 peripherals reset. + * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ADC12RST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR ARTRST LL_AHB1_GRP1_ForceReset\n (*) + * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n (*) + * AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ForceReset\n (*) + * AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ForceReset\n + * AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Release AHB1 peripherals reset. + * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ADC12RST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR ARTRST LL_AHB1_GRP1_ReleaseReset\n (*) + * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n (*) + * AHB1RSTR ETH1MACRST LL_AHB1_GRP1_ReleaseReset\n (*) + * AHB1RSTR USB1OTGHSRST LL_AHB1_GRP1_ReleaseReset\n + * AHB1RSTR USB2OTGHSRST LL_AHB1_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1RSTR, Periphs); +} + +/** + * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ARTLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ARTLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB1OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_AHB1_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR HSEMEN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR BDMA1EN LL_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR FMACEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HSEMEN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR BDMA1EN LL_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR FMACEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR HSEMEN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR BDMA1EN LL_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR FMACEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR CORDICEN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM1EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM2EN LL_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM3EN LL_AHB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2ENR, Periphs); +} + +/** + * @brief Force AHB2 peripherals reset. + * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR HSEMRST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR BDMA1RST LL_AHB2_GRP1_ForceReset\n (*) + * AHB2RSTR FMACRST LL_AHB2_GRP1_ForceReset\n + * AHB2RSTR CORDICRST LL_AHB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Release AHB2 peripherals reset. + * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR HSEMRST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR SDMMC2RST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR BDMA1RST LL_AHB2_GRP1_ReleaseReset\n (*) + * AHB2RSTR FMACRST LL_AHB2_GRP1_ReleaseReset\n + * AHB2RSTR CORDICRST LL_AHB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2RSTR, Periphs); +} + +/** + * @brief Enable AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR FMACLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CORDICLPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR BDMA1LPEN LL_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR D2SRAM1LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_AHB2_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_FMAC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CORDIC (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOIEN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR GPIOJEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOKEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BDMAEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR ADC3EN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR HSEMEN LL_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_EnableClock\n + * AHB4ENR SRAM4EN LL_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOIEN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR GPIOJEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOKEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BDMAEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR ADC3EN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR HSEMEN LL_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR SRAM4EN LL_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOIEN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR GPIOJEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOKEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BDMAEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR ADC3EN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR HSEMEN LL_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BKPRAMEN LL_AHB4_GRP1_DisableClock\n + * AHB4ENR SRAM4EN LL_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4ENR, Periphs); +} + +/** + * @brief Force AHB4 peripherals reset. + * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIODRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOERST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOIRST LL_AHB4_GRP1_ForceReset\n (*) + * AHB4RSTR GPIOJRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR GPIOKRST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR CRCRST LL_AHB4_GRP1_ForceReset\n (*) + * AHB4RSTR BDMARST LL_AHB4_GRP1_ForceReset\n + * AHB4RSTR ADC3RST LL_AHB4_GRP1_ForceReset\n (*) + * AHB4RSTR HSEMRST LL_AHB4_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHB4RSTR, Periphs); +} + +/** + * @brief Release AHB4 peripherals reset. + * @rmtoll AHB4RSTR GPIOARST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOBRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOCRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIODRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOERST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOFRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOGRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOHRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOIRST LL_AHB4_GRP1_ReleaseReset\n (*) + * AHB4RSTR GPIOJRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR GPIOKRST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR CRCRST LL_AHB4_GRP1_ReleaseReset\n (*) + * AHB4RSTR BDMARST LL_AHB4_GRP1_ReleaseReset\n + * AHB4RSTR ADC3RST LL_AHB4_GRP1_ReleaseReset\n (*) + * AHB4RSTR HSEMRST LL_AHB4_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4RSTR, Periphs); +} + +/** + * @brief Enable AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOILPEN LL_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR ADC3LPEN LL_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOILPEN LL_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR GPIOJLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR ADC3LPEN LL_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB3 APB3 + * @{ + */ + +/** + * @brief Enable APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_EnableClock\n (*) + * APB3ENR DSIEN LL_APB3_GRP1_EnableClock\n (*) + * APB3ENR WWDG1EN LL_APB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB3 peripheral clock is enabled or not + * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR DSIEN LL_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR WWDG1EN LL_APB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_APB3_GRP1_DisableClock\n + * APB3ENR DSIEN LL_APB3_GRP1_DisableClock\n + * APB3ENR WWDG1EN LL_APB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB3ENR, Periphs); +} + +/** + * @brief Force APB3 peripherals reset. + * @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ForceReset\n (*) + * APB3RSTR DSIRST LL_APB3_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB3RSTR, Periphs); +} + +/** + * @brief Release APB3 peripherals reset. + * @rmtoll APB3RSTR LTDCRST LL_APB3_GRP1_ReleaseReset\n + * APB3RSTR DSIRST LL_APB3_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB3RSTR, Periphs); +} + +/** + * @brief Enable APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR DSILPEN LL_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_APB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR DSILPEN LL_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_APB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM4EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM5EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM6EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM7EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM12EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM13EN LL_APB1_GRP1_EnableClock\n + * APB1LENR TIM14EN LL_APB1_GRP1_EnableClock\n + * APB1LENR LPTIM1EN LL_APB1_GRP1_EnableClock\n + * APB1LENR WWDG2EN LL_APB1_GRP1_EnableClock\n (*) + * APB1LENR SPI2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR SPI3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR SPDIFRXEN LL_APB1_GRP1_EnableClock\n + * APB1LENR USART2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR USART3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART4EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART5EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C1EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C2EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C3EN LL_APB1_GRP1_EnableClock\n + * APB1LENR I2C5EN LL_APB1_GRP1_EnableClock\n (*) + * APB1LENR CECEN LL_APB1_GRP1_EnableClock\n + * APB1LENR DAC12EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART7EN LL_APB1_GRP1_EnableClock\n + * APB1LENR UART8EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR WWDG2EN LL_APB1_GRP1_IsEnabledClock\n (*) + * APB1LENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPDIFRXEN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART4EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART5EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C5EN LL_APB1_GRP1_IsEnabledClock\n (*) + * APB1LENR CECEN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR DAC12EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART7EN LL_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART8EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1LENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM4EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM5EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM6EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM7EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM12EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM13EN LL_APB1_GRP1_DisableClock\n + * APB1LENR TIM14EN LL_APB1_GRP1_DisableClock\n + * APB1LENR LPTIM1EN LL_APB1_GRP1_DisableClock\n + * APB1LENR WWDG2EN LL_APB1_GRP1_DisableClock\n (*) + * APB1LENR SPI2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR SPI3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR SPDIFRXEN LL_APB1_GRP1_DisableClock\n + * APB1LENR USART2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR USART3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART4EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART5EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C1EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C2EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C3EN LL_APB1_GRP1_DisableClock\n + * APB1LENR I2C5EN LL_APB1_GRP1_DisableClock\n (*) + * APB1LENR CECEN LL_APB1_GRP1_DisableClock\n + * APB1LENR DAC12EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART7EN LL_APB1_GRP1_DisableClock\n + * APB1LENR UART8EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM4RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM5RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM6RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM7RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM12RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM13RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR TIM14RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR LPTIM1RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR SPI2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR SPI3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR USART2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR USART3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART4RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART5RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C1RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C2RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C3RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR I2C5RST LL_APB1_GRP5_ForceReset\n (*) + * APB1LRSTR CECRST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR DAC12RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART7RST LL_APB1_GRP1_ForceReset\n + * APB1LRSTR UART8RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1LRSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR SPDIFRXRST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR USART2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR USART3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART4RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART5RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR I2C5RST LL_APB1_GRP1_ReleaseReset\n (*) + * APB1LRSTR CECRST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR DAC12RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART7RST LL_APB1_GRP1_ReleaseReset\n + * APB1LRSTR UART8RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LRSTR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM6LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM12LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM13LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM14LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_APB1_GRP1_EnableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART4LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART5LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C1LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C2LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C3LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C5LPEN LL_APB1_GRP1_EnableClockSleep\n (*) + * APB1LLPENR CECLPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR DAC12LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART7LPEN LL_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART8LPEN LL_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1LLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1LLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM6LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM12LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM13LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM14LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_APB1_GRP1_DisableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART4LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART5LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C1LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C2LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C3LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C5LPEN LL_APB1_GRP1_DisableClockSleep\n (*) + * APB1LLPENR CECLPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR DAC12LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART7LPEN LL_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART8LPEN LL_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C5 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1LLPENR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_EnableClock\n + * APB1HENR SWPMIEN LL_APB1_GRP2_EnableClock\n + * APB1HENR OPAMPEN LL_APB1_GRP2_EnableClock\n + * APB1HENR MDIOSEN LL_APB1_GRP2_EnableClock\n + * APB1HENR FDCANEN LL_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1HENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1HENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR SWPMIEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR OPAMPEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR MDIOSEN LL_APB1_GRP2_IsEnabledClock\n + * APB1HENR FDCANEN LL_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1HENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_APB1_GRP2_DisableClock\n + * APB1HENR SWPMIEN LL_APB1_GRP2_DisableClock\n + * APB1HENR OPAMPEN LL_APB1_GRP2_DisableClock\n + * APB1HENR MDIOSEN LL_APB1_GRP2_DisableClock\n + * APB1HENR FDCANEN LL_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1HENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR SWPMIRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR OPAMPRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR MDIOSRST LL_APB1_GRP2_ForceReset\n + * APB1HRSTR FDCANRST LL_APB1_GRP2_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1HRSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1HRSTR CRSRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR SWPMIRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR OPAMPRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR MDIOSRST LL_APB1_GRP2_ReleaseReset\n + * APB1HRSTR FDCANRST LL_APB1_GRP2_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1HRSTR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR SWPMILPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR FDCANLPEN LL_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1HLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1HLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR SWPMILPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR FDCANLPEN LL_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1HLPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n + * APB2ENR UART9EN LL_APB2_GRP1_EnableClock\n (*) + * APB2ENR USART10EN LL_APB2_GRP1_EnableClock\n (*) + * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n + * APB2ENR SAI3EN LL_APB2_GRP1_EnableClock\n (*) + * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock\n + * APB2ENR HRTIMEN LL_APB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR UART9EN LL_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR USART10EN LL_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI3EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock\n + * APB2ENR HRTIMEN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n + * APB2ENR UART9EN LL_APB2_GRP1_DisableClock\n (*) + * APB2ENR USART10EN LL_APB2_GRP1_DisableClock\n (*) + * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n + * APB2ENR SAI3EN LL_APB2_GRP1_DisableClock\n (*) + * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock\n + * APB2ENR HRTIMEN LL_APB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n + * APB2ENR UART9RST LL_APB2_GRP1_ForceReset\n (*) + * APB2ENR USART10RST LL_APB2_GRP1_ForceReset\n (*) + * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR SAI3RST LL_APB2_GRP1_ForceReset\n (*) + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset\n + * APB2RSTR HRTIMRST LL_APB2_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n + * APB2ENR UART9RST LL_APB2_GRP1_ReleaseReset\n (*) + * APB2ENR USART10RST LL_APB2_GRP1_ReleaseReset\n (*) + * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI4RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SPI5RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR SAI3RST LL_APB2_GRP1_ReleaseReset\n (*) + * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset\n + * APB2RSTR HRTIMRST LL_APB2_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2ENR UART9LPEN LL_APB2_GRP1_EnableClockSleep\n (*) + * APB2ENR USART10LPEN LL_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI3LPEN LL_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_EnableClockSleep\n + * APB2LPENR HRTIMLPEN LL_APB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2ENR UART9LPEN LL_APB2_GRP1_DisableClockSleep\n (*) + * APB2ENR USART10LPEN LL_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI3LPEN LL_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_APB2_GRP1_DisableClockSleep\n + * APB2LPENR HRTIMLPEN LL_APB2_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_EnableClock\n + * APB4ENR I2C4EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR LPTIM5EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR DAC2EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR COMP12EN LL_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_EnableClock\n + * APB4ENR SAI4EN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR DTSEN LL_APB4_GRP1_EnableClock\n (*) + * APB4ENR DFSDM2EN LL_APB4_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR I2C4EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR LPTIM5EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DAC2EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR COMP12EN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_IsEnabledClock\n + * APB4ENR SAI4EN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DTSEN LL_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DFSDM2EN LL_APB4_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_APB4_GRP1_DisableClock\n + * APB4ENR I2C4EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR LPTIM5EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR DAC2EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR COMP12EN LL_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_APB4_GRP1_DisableClock\n + * APB4ENR SAI4EN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR DTSEN LL_APB4_GRP1_DisableClock\n (*) + * APB4ENR DFSDM2EN LL_APB4_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4ENR, Periphs); +} + +/** + * @brief Force APB4 peripherals reset. + * @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPUART1RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR SPI6RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR I2C4RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM2RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM3RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR LPTIM4RST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR LPTIM5RST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR DAC2EN LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR COMP12RST LL_APB4_GRP1_ForceReset\n + * APB4RSTR VREFRST LL_APB4_GRP1_ForceReset\n + * APB4RSTR SAI4RST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR DTSRST LL_APB4_GRP1_ForceReset\n (*) + * APB4RSTR DFSDM2RST LL_APB4_GRP1_ForceReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB4RSTR, Periphs); +} + +/** + * @brief Release APB4 peripherals reset. + * @rmtoll APB4RSTR SYSCFGRST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPUART1RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR SPI6RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR I2C4RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM2RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM3RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR LPTIM4RST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR LPTIM5RST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR DAC2RST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR COMP12RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR VREFRST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR SAI4RST LL_APB4_GRP1_ReleaseReset\n + * APB4RSTR DTSRST LL_APB4_GRP1_ReleaseReset\n (*) + * APB4RSTR DFSDM2RST LL_APB4_GRP1_ReleaseReset (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4RSTR, Periphs); +} + +/** + * @brief Enable APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR I2C4LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR DAC2LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR COMP12LPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SAI4LPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR DTSLPEN LL_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR DFSDM2LPEN LL_APB4_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR I2C4LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR LPTIM5LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR DAC2LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR COMP12LPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SAI4LPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR DTSLPEN LL_APB4_GRP1_DisableClockSleep\n (*) + * APB4LPENR DFSDM2LPEN LL_APB4_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DAC2 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_CLKAM CLKAM + * @{ + */ + +/** + * @brief Enable peripherals clock for CLKAM Mode. + * @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPUART1 LL_CLKAM_Enable\n + * D3AMR / SRDAMR SPI6 LL_CLKAM_Enable\n + * D3AMR / SRDAMR I2C4 LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPTIM2 LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPTIM3 LL_CLKAM_Enable\n + * D3AMR / SRDAMR LPTIM4 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR LPTIM5 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR DAC2 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR COMP12 LL_CLKAM_Enable\n + * D3AMR / SRDAMR VREF LL_CLKAM_Enable\n + * D3AMR / SRDAMR RTC LL_CLKAM_Enable\n + * D3AMR / SRDAMR CRC LL_CLKAM_Enable\n + * D3AMR / SRDAMR SAI4 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR ADC3 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR DTS LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR DFSDM2 LL_CLKAM_Enable\n (*) + * D3AMR / SRDAMR BKPRAM LL_CLKAM_Enable\n + * D3AMR / SRDAMR SRAM4 LL_CLKAM_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CLKAM_PERIPH_BDMA + * @arg @ref LL_CLKAM_PERIPH_GPIO (*) + * @arg @ref LL_CLKAM_PERIPH_LPUART1 + * @arg @ref LL_CLKAM_PERIPH_SPI6 + * @arg @ref LL_CLKAM_PERIPH_I2C4 + * @arg @ref LL_CLKAM_PERIPH_LPTIM2 + * @arg @ref LL_CLKAM_PERIPH_LPTIM3 + * @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*) + * @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*) + * @arg @ref LL_CLKAM_PERIPH_DAC2 (*) + * @arg @ref LL_CLKAM_PERIPH_COMP12 + * @arg @ref LL_CLKAM_PERIPH_VREF + * @arg @ref LL_CLKAM_PERIPH_RTC + * @arg @ref LL_CLKAM_PERIPH_CRC (*) + * @arg @ref LL_CLKAM_PERIPH_SAI4 (*) + * @arg @ref LL_CLKAM_PERIPH_ADC3 (*) + * @arg @ref LL_CLKAM_PERIPH_DTS (*) + * @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*) + * @arg @ref LL_CLKAM_PERIPH_BKPRAM + * @arg @ref LL_CLKAM_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_CLKAM_Enable(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + +#if defined(RCC_D3AMR_BDMAAMEN) + SET_BIT(RCC->D3AMR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->D3AMR, Periphs); +#else + SET_BIT(RCC->SRDAMR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->SRDAMR, Periphs); +#endif /* RCC_D3AMR_BDMAAMEN */ + (void)tmpreg; +} + +/** + * @brief Disable peripherals clock for CLKAM Mode. + * @rmtoll D3AMR / SRDAMR BDMA LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPUART1 LL_CLKAM_Disable\n + * D3AMR / SRDAMR SPI6 LL_CLKAM_Disable\n + * D3AMR / SRDAMR I2C4 LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPTIM2 LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPTIM3 LL_CLKAM_Disable\n + * D3AMR / SRDAMR LPTIM4 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR LPTIM5 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR DAC2 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR COMP12 LL_CLKAM_Disable\n + * D3AMR / SRDAMR VREF LL_CLKAM_Disable\n + * D3AMR / SRDAMR RTC LL_CLKAM_Disable\n + * D3AMR / SRDAMR CRC LL_CLKAM_Disable\n + * D3AMR / SRDAMR SAI4 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR ADC3 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR DTS LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR DFSDM2 LL_CLKAM_Disable\n (*) + * D3AMR / SRDAMR BKPRAM LL_CLKAM_Disable\n + * D3AMR / SRDAMR SRAM4 LL_CLKAM_Disable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CLKAM_PERIPH_BDMA + * @arg @ref LL_CLKAM_PERIPH_GPIO (*) + * @arg @ref LL_CLKAM_PERIPH_LPUART1 + * @arg @ref LL_CLKAM_PERIPH_SPI6 + * @arg @ref LL_CLKAM_PERIPH_I2C4 + * @arg @ref LL_CLKAM_PERIPH_LPTIM2 + * @arg @ref LL_CLKAM_PERIPH_LPTIM3 + * @arg @ref LL_CLKAM_PERIPH_LPTIM4 (*) + * @arg @ref LL_CLKAM_PERIPH_LPTIM5 (*) + * @arg @ref LL_CLKAM_PERIPH_DAC2 (*) + * @arg @ref LL_CLKAM_PERIPH_COMP12 + * @arg @ref LL_CLKAM_PERIPH_VREF + * @arg @ref LL_CLKAM_PERIPH_RTC + * @arg @ref LL_CLKAM_PERIPH_CRC (*) + * @arg @ref LL_CLKAM_PERIPH_SAI4 (*) + * @arg @ref LL_CLKAM_PERIPH_ADC3 (*) + * @arg @ref LL_CLKAM_PERIPH_DTS (*) + * @arg @ref LL_CLKAM_PERIPH_DFSDM2 (*) + * @arg @ref LL_CLKAM_PERIPH_BKPRAM + * @arg @ref LL_CLKAM_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_CLKAM_Disable(uint32_t Periphs) +{ +#if defined(RCC_D3AMR_BDMAAMEN) + CLEAR_BIT(RCC->D3AMR, Periphs); +#else + CLEAR_BIT(RCC->SRDAMR, Periphs); +#endif /* RCC_D3AMR_BDMAAMEN */ +} + +/** + * @} + */ + +/** @defgroup BUS_LL_EF_CKGA CKGA + * @{ + */ + +#if defined(RCC_CKGAENR_AXICKG) + + +/** + * @brief Enable clock gating for AXI bus peripherals. + * @rmtoll CKGAENR AXICKG LL_CKGA_Enable\n + * CKGAENR AHBCKG LL_CKGA_Enable\n + * CKGAENR CPUCKG LL_CKGA_Enable\n + * CKGAENR SDMMCCKG LL_CKGA_Enable\n + * CKGAENR MDMACKG LL_CKGA_Enable\n + * CKGAENR DMA2DCKG LL_CKGA_Enable\n + * CKGAENR LTDCCKG LL_CKGA_Enable\n + * CKGAENR GFXMMUMCKG LL_CKGA_Enable\n + * CKGAENR AHB12CKG LL_CKGA_Enable\n + * CKGAENR AHB34CKG LL_CKGA_Enable\n + * CKGAENR FLIFTCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI2CKG LL_CKGA_Enable\n + * CKGAENR FMCCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM2CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM3CKG LL_CKGA_Enable\n + * CKGAENR GFXMMUSCKG LL_CKGA_Enable\n + * CKGAENR ECCRAMCKG LL_CKGA_Enable\n + * CKGAENR EXTICKG LL_CKGA_Enable\n + * CKGAENR JTAGCKG LL_CKGA_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHB + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_SDMMC + * @arg @ref LL_CKGA_PERIPH_MDMA + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_LTDC + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_AHB12 + * @arg @ref LL_CKGA_PERIPH_AHB34 + * @arg @ref LL_CKGA_PERIPH_FLIFT + * @arg @ref LL_CKGA_PERIPH_OCTOSPI2 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_OCTOSPI1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_ECCRAM + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * @retval None +*/ +__STATIC_INLINE void LL_CKGA_Enable(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->CKGAENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->CKGAENR, Periphs); + (void)tmpreg; +} + +#endif /* RCC_CKGAENR_AXICKG */ + +#if defined(RCC_CKGAENR_AXICKG) + +/** + * @brief Disable clock gating for AXI bus peripherals. + * @rmtoll CKGAENR AXICKG LL_CKGA_Enable\n + * CKGAENR AHBCKG LL_CKGA_Enable\n + * CKGAENR CPUCKG LL_CKGA_Enable\n + * CKGAENR SDMMCCKG LL_CKGA_Enable\n + * CKGAENR MDMACKG LL_CKGA_Enable\n + * CKGAENR DMA2DCKG LL_CKGA_Enable\n + * CKGAENR LTDCCKG LL_CKGA_Enable\n + * CKGAENR GFXMMUMCKG LL_CKGA_Enable\n + * CKGAENR AHB12CKG LL_CKGA_Enable\n + * CKGAENR AHB34CKG LL_CKGA_Enable\n + * CKGAENR FLIFTCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI2CKG LL_CKGA_Enable\n + * CKGAENR FMCCKG LL_CKGA_Enable\n + * CKGAENR OCTOSPI1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM1CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM2CKG LL_CKGA_Enable\n + * CKGAENR AXIRAM3CKG LL_CKGA_Enable\n + * CKGAENR GFXMMUSCKG LL_CKGA_Enable\n + * CKGAENR ECCRAMCKG LL_CKGA_Enable\n + * CKGAENR EXTICKG LL_CKGA_Enable\n + * CKGAENR JTAGCKG LL_CKGA_Enable + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_CKGA_PERIPH_AXI + * @arg @ref LL_CKGA_PERIPH_AHB + * @arg @ref LL_CKGA_PERIPH_CPU + * @arg @ref LL_CKGA_PERIPH_SDMMC + * @arg @ref LL_CKGA_PERIPH_MDMA + * @arg @ref LL_CKGA_PERIPH_DMA2D + * @arg @ref LL_CKGA_PERIPH_LTDC + * @arg @ref LL_CKGA_PERIPH_GFXMMUM + * @arg @ref LL_CKGA_PERIPH_AHB12 + * @arg @ref LL_CKGA_PERIPH_AHB34 + * @arg @ref LL_CKGA_PERIPH_FLIFT + * @arg @ref LL_CKGA_PERIPH_OCTOSPI2 + * @arg @ref LL_CKGA_PERIPH_FMC + * @arg @ref LL_CKGA_PERIPH_OCTOSPI1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM1 + * @arg @ref LL_CKGA_PERIPH_AXIRAM2 + * @arg @ref LL_CKGA_PERIPH_AXIRAM3 + * @arg @ref LL_CKGA_PERIPH_GFXMMUS + * @arg @ref LL_CKGA_PERIPH_ECCRAM + * @arg @ref LL_CKGA_PERIPH_EXTI + * @arg @ref LL_CKGA_PERIPH_JTAG + * @retval None +*/ +__STATIC_INLINE void LL_CKGA_Disable(uint32_t Periphs) +{ + CLEAR_BIT(RCC->CKGAENR, Periphs); +} + +#endif /* RCC_CKGAENR_AXICKG */ + +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @addtogroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable C1 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR FMCEN LL_C1_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR GFXMMUEN LL_C1_AHB3_GRP1_EnableClock\n (*) + * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FMCEN LL_C1_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR GFXMMUEN LL_C1_AHB3_GRP1_IsEnabledClock\n (*) + * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR DMA2DEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR JPGDECEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR FMCEN LL_C1_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI1EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OSPI2EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR IOMNGREN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC1EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR OTFDEC2EN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR GFXMMUEN LL_C1_AHB3_GRP1_DisableClock\n (*) + * AHB3ENR SDMMC1EN LL_C1_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB3ENR, Periphs); +} + +/** + * @brief Enable C1 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_EnableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FMCLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR QSPILPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OSPI1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OSPI2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR IOMNGRLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR OTFDEC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR GFXMMULPEN LL_C1_AHB3_GRP1_DisableClockSleep\n (*) + * AHB3LPENR SDMMC1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C1_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C1_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OSPI2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OCTOSPIM (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC1 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_OTFDEC2 (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_GFXMMU (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable C1 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR CRCEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ARTEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_EnableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR CRCEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ARTEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_IsEnabledClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR CRCEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ARTEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1MACEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1TXEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR ETH1RXEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB1OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSEN LL_C1_AHB1_GRP1_DisableClock\n (*) + * AHB1ENR USB2OTGHSULPIEN LL_C1_AHB1_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB1ENR, Periphs); +} + +/** + * @brief Enable C1 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_EnableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR CRCLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ARTLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1MACLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1TXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR ETH1RXLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB1OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C1_AHB1_GRP1_DisableClockSleep\n (*) + * AHB1LPENR USB2OTGHSULPILPEN LL_C1_AHB1_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable C1 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR HASHEN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR RNGEN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_EnableClock\n (*) + * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_EnableClock\n + * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR HASHEN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR RNGEN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_IsEnabledClock\n (*) + * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR HSEMEN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR CRYPEN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR HASHEN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR RNGEN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR BDMA1EN LL_C1_AHB2_GRP1_DisableClock\n (*) + * AHB2ENR D2SRAM1EN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM2EN LL_C1_AHB2_GRP1_DisableClock\n + * AHB2ENR D2SRAM3EN LL_C1_AHB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB2ENR, Periphs); +} + +/** + * @brief Enable C1 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n (*) + * AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR HASHLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR RNGLPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR BDAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n (*) + * AHB2LPENR D2SRAM1LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_C1_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C1_AHB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_BDMA1 (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable C1 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_C1_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_EnableClock\n (*) + * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_EnableClock\n + * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_IsEnabledClock\n (*) + * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOIEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOJEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOKEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_C1_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BDMAEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR ADC3EN LL_C1_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR HSEMEN LL_C1_AHB4_GRP1_DisableClock\n (*) + * AHB4ENR BKPRAMEN LL_C1_AHB4_GRP1_DisableClock\n + * AHB4ENR SRAM4EN LL_C1_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB4ENR, Periphs); +} + +/** + * @brief Enable C1 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_EnableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BDMALPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C1_AHB4_GRP1_DisableClockSleep\n (*) + * AHB4LPENR BKPRAMLPEN LL_C1_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C1_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C1_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB3 APB3 + * @{ + */ + +/** + * @brief Enable C1 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_EnableClock\n (*) + * APB3ENR DSIEN LL_C1_APB3_GRP1_EnableClock\n (*) + * APB3ENR WWDG1EN LL_C1_APB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB3 peripheral clock is enabled or not + * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR DSIEN LL_C1_APB3_GRP1_IsEnabledClock\n (*) + * APB3ENR WWDG1EN LL_C1_APB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C1_APB3_GRP1_DisableClock\n (*) + * APB3ENR DSIEN LL_C1_APB3_GRP1_DisableClock\n (*) + * APB3ENR WWDG1EN LL_C1_APB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB3ENR, Periphs); +} + +/** + * @brief Enable C1 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR DSILPEN LL_C1_APB3_GRP1_EnableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR DSILPEN LL_C1_APB3_GRP1_DisableClockSleep\n (*) + * APB3LPENR WWDG1LPEN LL_C1_APB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable C1 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM4EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM5EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM6EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM7EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM12EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM13EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR TIM14EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR WWDG2EN LL_C1_APB1_GRP1_EnableClock\n (*) + * APB1LENR SPI2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR SPI3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR USART2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR USART3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART4EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART5EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR I2C1EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR I2C2EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR I2C3EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR CECEN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR DAC12EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART7EN LL_C1_APB1_GRP1_EnableClock\n + * APB1LENR UART8EN LL_C1_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1LENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1LENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB1 peripheral clock is enabled or not + * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM4EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM5EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM6EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM7EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM12EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM13EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM14EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR WWDG2EN LL_C1_APB1_GRP1_IsEnabledClock\n (*) + * APB1LENR SPI2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART4EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART5EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C1EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C2EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C3EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR CECEN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR DAC12EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART7EN LL_C1_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART8EN LL_C1_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB1LENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM4EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM5EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM6EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM7EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM12EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM13EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR TIM14EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR LPTIM1EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR WWDG2EN LL_C1_APB1_GRP1_DisableClock\n (*) + * APB1LENR SPI2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR SPI3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR SPDIFRXEN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR USART2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR USART3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART4EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART5EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR I2C1EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR I2C2EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR I2C3EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR CECEN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR DAC12EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART7EN LL_C1_APB1_GRP1_DisableClock\n + * APB1LENR UART8EN LL_C1_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1LENR, Periphs); +} + +/** + * @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR CECLPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1LLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1LLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n (*) + * APB1LLPENR SPI2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART4LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART5LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR CECLPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART7LPEN LL_C1_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART8LPEN LL_C1_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1LLPENR, Periphs); +} + +/** + * @brief Enable C1 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR SWPMIEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR OPAMPEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR MDIOSEN LL_C1_APB1_GRP2_EnableClock\n + * APB1HENR FDCANEN LL_C1_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1HENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1HENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB1 peripheral clock is enabled or not + * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR SWPMIEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR OPAMPEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR MDIOSEN LL_C1_APB1_GRP2_IsEnabledClock\n + * APB1HENR FDCANEN LL_C1_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB1HENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR SWPMIEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR OPAMPEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR MDIOSEN LL_C1_APB1_GRP2_DisableClock\n + * APB1HENR FDCANEN LL_C1_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1HENR, Periphs); +} + +/** + * @brief Enable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB1HLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB1HLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C1_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C1_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB1HLPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable C1 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClock\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClock\n (*) + * APB2ENR SPI1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR SAI3EN LL_C1_APB2_GRP1_EnableClock\n (*) + * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_EnableClock\n + * APB2ENR HRTIMEN LL_C1_APB2_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR SPI1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI3EN LL_C1_APB2_GRP1_IsEnabledClock\n (*) + * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_IsEnabledClock\n + * APB2ENR HRTIMEN LL_C1_APB2_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE uint32_t LL_C1_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_DisableClock\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_DisableClock\n (*) + * APB2ENR SPI1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR SAI3EN LL_C1_APB2_GRP1_DisableClock\n (*) + * APB2ENR DFSDM1EN LL_C1_APB2_GRP1_DisableClock\n + * APB2ENR HRTIMEN LL_C1_APB2_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB2ENR, Periphs); +} + +/** + * @brief Enable C1 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART6LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2ENR UART9EN LL_C1_APB2_GRP1_EnableClockSleep\n (*) + * APB2ENR USART10EN LL_C1_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_EnableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_EnableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM8LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR UART9LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR USART10LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR USART6LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI3LPEN LL_C1_APB2_GRP1_DisableClockSleep\n (*) + * APB2LPENR DFSDM1LPEN LL_C1_APB2_GRP1_DisableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C1_APB2_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_UART9 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_USART10 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable C1 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR I2C4EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR DAC2EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR COMP12EN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_EnableClock\n + * APB4ENR SAI4EN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR DTSEN LL_C1_APB4_GRP1_EnableClock\n (*) + * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_EnableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C1 APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR I2C4EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR COMP12EN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_IsEnabledClock\n + * APB4ENR SAI4EN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DTSEN LL_C1_APB4_GRP1_IsEnabledClock\n (*) + * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_IsEnabledClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C1_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C1->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C1 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR I2C4EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR LPTIM5EN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR COMP12EN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_C1_APB4_GRP1_DisableClock\n + * APB4ENR SAI4EN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR DTSEN LL_C1_APB4_GRP1_DisableClock\n (*) + * APB4ENR DFSDM2EN LL_C1_APB4_GRP1_DisableClock (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB4ENR, Periphs); +} + +/** + * @brief Enable C1 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SAI4LPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4ENR DTSLPEN LL_C1_APB4_GRP1_EnableClockSleep\n (*) + * APB4ENR DFSDM2LPEN LL_C1_APB4_GRP1_EnableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C1->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C1->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C1 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR I2C4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR COMP12LPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C1_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SAI4LPEN LL_C1_APB4_GRP1_DisableClockSleep\n (*) + * APB4ENR DTSLPEN LL_C1_APB4_GRP1_DisableClockSleep\n (*) + * APB4ENR DFSDM2LPEN LL_C1_APB4_GRP1_DisableClockSleep (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DTS (*) + * @arg @ref LL_APB4_GRP1_PERIPH_DFSDM2 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C1_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C1->APB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB3 AHB3 + * @{ + */ + +/** + * @brief Enable C2 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR FMCEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_EnableClock\n + * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB3 peripheral clock is enabled or not + * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FMCEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_IsEnabledClock\n + * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB3 peripherals clock. + * @rmtoll AHB3ENR MDMAEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR DMA2DEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR JPGDECEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR FMCEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR QSPIEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR SDMMC1EN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR FLASHEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR DTCM1EN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR DTCM2EN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR ITCMEN LL_C2_AHB3_GRP1_DisableClock\n + * AHB3ENR AXISRAMEN LL_C2_AHB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_MDMA + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB3ENR, Periphs); +} + +/** + * @brief Enable C2 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_EnableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB3LPENR MDMALPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DMA2DLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR JPGDECLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FMCLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR QSPILPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR SDMMC1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR FLASHLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM1LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR DTCM2LPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR ITCMLPEN LL_C2_AHB3_GRP1_DisableClockSleep\n + * AHB3LPENR AXISRAMLPEN LL_C2_AHB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB3_GRP1_PERIPH_DMA2D + * @arg @ref LL_AHB3_GRP1_PERIPH_JPGDEC (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_FMC + * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI (*) + * @arg @ref LL_AHB3_GRP1_PERIPH_SDMMC1 + * @arg @ref LL_AHB3_GRP1_PERIPH_FLASH + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM1 + * @arg @ref LL_AHB3_GRP1_PERIPH_DTCM2 + * @arg @ref LL_AHB3_GRP1_PERIPH_ITCM + * @arg @ref LL_AHB3_GRP1_PERIPH_AXISRAM + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB1 AHB1 + * @{ + */ + +/** + * @brief Enable C2 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ARTEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_EnableClock\n + * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB1 peripheral clock is enabled or not + * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ARTEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_IsEnabledClock\n + * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB1ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB1 peripherals clock. + * @rmtoll AHB1ENR DMA1EN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR DMA2EN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ADC12EN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ARTEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1MACEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1TXEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR ETH1RXEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB1OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSEN LL_C2_AHB1_GRP1_DisableClock\n + * AHB1ENR USB2OTGHSULPIEN LL_C2_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB1ENR, Periphs); +} + +/** + * @brief Enable C2 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_EnableClockSleep\n + * AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB1LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB1LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB1LPENR DMA1LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR DMA2LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ADC12LPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ARTLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1MACLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1TXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR ETH1RXLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB1OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSLPEN LL_C2_AHB1_GRP1_DisableClockSleep\n + * AHB1LPENR USB2OTGHSULPILPEN LL_C2_AHB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 + * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 + * @arg @ref LL_AHB1_GRP1_PERIPH_ADC12 + * @arg @ref LL_AHB1_GRP1_PERIPH_ART (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1MAC (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1TX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_ETH1RX (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHS + * @arg @ref LL_AHB1_GRP1_PERIPH_USB1OTGHSULPI + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHS (*) + * @arg @ref LL_AHB1_GRP1_PERIPH_USB2OTGHSULPI (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB1LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB2 AHB2 + * @{ + */ + +/** + * @brief Enable C2 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR HASHEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR RNGEN LL_C2_AHB2_GRP1_EnableClock\n + * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB2 peripheral clock is enabled or not + * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR HASHEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR RNGEN LL_C2_AHB2_GRP1_IsEnabledClock\n + * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB2 peripherals clock. + * @rmtoll AHB2ENR DCMIEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR CRYPEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR HASHEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR RNGEN LL_C2_AHB2_GRP1_DisableClock\n + * AHB2ENR SDMMC2EN LL_C2_AHB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB2ENR, Periphs); +} + +/** + * @brief Enable C2 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_EnableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB2LPENR DCMILPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR CRYPLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR HASHLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR RNGLPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR SDMMC2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM1LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM2LPEN LL_C2_AHB2_GRP1_DisableClockSleep\n + * AHB2LPENR D2SRAM3LPEN LL_C2_AHB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI + * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*) + * @arg @ref LL_AHB2_GRP1_PERIPH_RNG + * @arg @ref LL_AHB2_GRP1_PERIPH_SDMMC2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM1 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM2 + * @arg @ref LL_AHB2_GRP1_PERIPH_D2SRAM3 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_AHB4 AHB4 + * @{ + */ + +/** + * @brief Enable C2 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR CRCEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_EnableClock\n + * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 AHB4 peripheral clock is enabled or not + * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR CRCEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_IsEnabledClock\n + * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_AHB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->AHB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 AHB4 peripherals clock. + * @rmtoll AHB4ENR GPIOAEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOBEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOCEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIODEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOEEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOFEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOGEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOHEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOIEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOJEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR GPIOKEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR CRCEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR BDMAEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR ADC3EN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR HSEMEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR BKPRAMEN LL_C2_AHB4_GRP1_DisableClock\n + * AHB4ENR SRAM4EN LL_C2_AHB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_HSEM (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB4ENR, Periphs); +} + +/** + * @brief Enable C2 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_EnableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->AHB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->AHB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 AHB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll AHB4LPENR GPIOALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOBLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIODLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOELPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOFLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOGLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOHLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOILPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOJLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR GPIOKLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR CRCLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR BDMALPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR ADC3LPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR BKPRAMLPEN LL_C2_AHB4_GRP1_DisableClockSleep\n + * AHB4LPENR SRAM4LPEN LL_C2_AHB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOA + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOB + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOC + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOD + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOE + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOF + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOG + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOH + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOI (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOJ + * @arg @ref LL_AHB4_GRP1_PERIPH_GPIOK + * @arg @ref LL_AHB4_GRP1_PERIPH_CRC (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BDMA + * @arg @ref LL_AHB4_GRP1_PERIPH_ADC3 (*) + * @arg @ref LL_AHB4_GRP1_PERIPH_BKPRAM + * @arg @ref LL_AHB4_GRP1_PERIPH_SRAM4 + * @retval None +*/ +__STATIC_INLINE void LL_C2_AHB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->AHB4LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB3 APB3 + * @{ + */ + +/** + * @brief Enable C2 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_EnableClock\n + * APB3ENR DSIEN LL_C2_APB3_GRP1_EnableClock\n + * APB3ENR WWDG1EN LL_C2_APB3_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB3ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB3ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB3 peripheral clock is enabled or not + * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_IsEnabledClock\n + * APB3ENR DSIEN LL_C2_APB3_GRP1_IsEnabledClock\n + * APB3ENR WWDG1EN LL_C2_APB3_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB3_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB3ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB3 peripherals clock. + * @rmtoll APB3ENR LTDCEN LL_C2_APB3_GRP1_DisableClock\n + * APB3ENR DSIEN LL_C2_APB3_GRP1_DisableClock\n + * APB3ENR WWDG1EN LL_C2_APB3_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB3ENR, Periphs); +} + +/** + * @brief Enable C2 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_EnableClockSleep\n + * APB3LPENR DSILPEN LL_C2_APB3_GRP1_EnableClockSleep\n + * APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB3LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB3LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB3 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB3LPENR LTDCLPEN LL_C2_APB3_GRP1_DisableClockSleep\n + * APB3LPENR DSILPEN LL_C2_APB3_GRP1_DisableClockSleep\n + * APB3LPENR WWDG1LPEN LL_C2_APB3_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB3_GRP1_PERIPH_LTDC (*) + * @arg @ref LL_APB3_GRP1_PERIPH_DSI (*) + * @arg @ref LL_APB3_GRP1_PERIPH_WWDG1 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB3_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB3LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable C2 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM4EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM5EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM6EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM7EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM12EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM13EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR TIM14EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR WWDG2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR SPI2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR SPI3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR USART2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR USART3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART4EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART5EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR I2C1EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR I2C2EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR I2C3EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR CECEN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR DAC12EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART7EN LL_C2_APB1_GRP1_EnableClock\n + * APB1LENR UART8EN LL_C2_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1LENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1LENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB1 peripheral clock is enabled or not + * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM4EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM5EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM6EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM7EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM12EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM13EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR TIM14EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR WWDG2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPI3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR USART3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART4EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART5EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C1EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C2EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR I2C3EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR CECEN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR DAC12EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART7EN LL_C2_APB1_GRP1_IsEnabledClock\n + * APB1LENR UART8EN LL_C2_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB1LENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB1 peripherals clock. + * @rmtoll APB1LENR TIM2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM4EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM5EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM6EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM7EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM12EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM13EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR TIM14EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR LPTIM1EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR WWDG2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR SPI2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR SPI3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR SPDIFRXEN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR USART2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR USART3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART4EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART5EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR I2C1EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR I2C2EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR I2C3EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR CECEN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR DAC12EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART7EN LL_C2_APB1_GRP1_DisableClock\n + * APB1LENR UART8EN LL_C2_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1LENR, Periphs); +} + +/** + * @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR CECLPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_EnableClockSleep\n + * APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1LLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1LLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1LLPENR TIM2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM6LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM13LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR TIM14LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR LPTIM1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR WWDG2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPI3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR SPDIFRXLPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR USART3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART4LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART5LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C1LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C2LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR I2C3LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR CECLPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR DAC12LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART7LPEN LL_C2_APB1_GRP1_DisableClockSleep\n + * APB1LLPENR UART8LPEN LL_C2_APB1_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM12 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM13 + * @arg @ref LL_APB1_GRP1_PERIPH_TIM14 + * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 + * @arg @ref LL_APB1_GRP1_PERIPH_WWDG2 (*) + * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 + * @arg @ref LL_APB1_GRP1_PERIPH_SPI3 + * @arg @ref LL_APB1_GRP1_PERIPH_SPDIFRX + * @arg @ref LL_APB1_GRP1_PERIPH_USART2 + * @arg @ref LL_APB1_GRP1_PERIPH_USART3 + * @arg @ref LL_APB1_GRP1_PERIPH_UART4 + * @arg @ref LL_APB1_GRP1_PERIPH_UART5 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 + * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 + * @arg @ref LL_APB1_GRP1_PERIPH_CEC + * @arg @ref LL_APB1_GRP1_PERIPH_DAC12 + * @arg @ref LL_APB1_GRP1_PERIPH_UART7 + * @arg @ref LL_APB1_GRP1_PERIPH_UART8 + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1LLPENR, Periphs); +} + +/** + * @brief Enable C2 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR SWPMIEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR OPAMPEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR MDIOSEN LL_C2_APB1_GRP2_EnableClock\n + * APB1HENR FDCANEN LL_C2_APB1_GRP2_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1HENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1HENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB1 peripheral clock is enabled or not + * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR SWPMIEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR OPAMPEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR MDIOSEN LL_C2_APB1_GRP2_IsEnabledClock\n + * APB1HENR FDCANEN LL_C2_APB1_GRP2_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB1_GRP2_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB1HENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB1 peripherals clock. + * @rmtoll APB1HENR CRSEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR SWPMIEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR OPAMPEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR MDIOSEN LL_C2_APB1_GRP2_DisableClock\n + * APB1HENR FDCANEN LL_C2_APB1_GRP2_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1HENR, Periphs); +} + +/** + * @brief Enable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_EnableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB1HLPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB1HLPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB1 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB1HLPENR CRSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR SWPMILPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR OPAMPLPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR MDIOSLPEN LL_C2_APB1_GRP2_DisableClockSleep\n + * APB1HLPENR FDCANLPEN LL_C2_APB1_GRP2_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB1_GRP2_PERIPH_CRS + * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1 + * @arg @ref LL_APB1_GRP2_PERIPH_OPAMP + * @arg @ref LL_APB1_GRP2_PERIPH_MDIOS + * @arg @ref LL_APB1_GRP2_PERIPH_FDCAN + * @arg @ref LL_APB1_GRP2_PERIPH_TIM23 (*) + * @arg @ref LL_APB1_GRP2_PERIPH_TIM24 (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB1_GRP2_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB1HLPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB2 APB2 + * @{ + */ + +/** + * @brief Enable C2 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM8EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR USART1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR USART6EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SPI1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SPI4EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM15EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM16EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR TIM17EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SPI5EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SAI1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SAI2EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR SAI3EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_EnableClock\n + * APB2ENR HRTIMEN LL_C2_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM8EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR USART6EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI4EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM15EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM16EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR TIM17EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SPI5EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI2EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR SAI3EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_IsEnabledClock\n + * APB2ENR HRTIMEN LL_C2_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB2ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB2 peripherals clock. + * @rmtoll APB2ENR TIM1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM8EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR USART1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR USART6EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SPI1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SPI4EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM15EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM16EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR TIM17EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SPI5EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SAI1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SAI2EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR SAI3EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR DFSDM1EN LL_C2_APB2_GRP1_DisableClock\n + * APB2ENR HRTIMEN LL_C2_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB2ENR, Periphs); +} + +/** + * @brief Enable C2 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR USART6LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_EnableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB2LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB2LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB2 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB2LPENR TIM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM8LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR USART6LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI4LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM15LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM16LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR TIM17LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SPI5LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI2LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR SAI3LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR DFSDM1LPEN LL_C2_APB2_GRP1_DisableClockSleep\n + * APB2LPENR HRTIMLPEN LL_C2_APB2_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB2_GRP1_PERIPH_TIM1 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 + * @arg @ref LL_APB2_GRP1_PERIPH_USART1 + * @arg @ref LL_APB2_GRP1_PERIPH_USART6 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI4 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM15 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM16 + * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 + * @arg @ref LL_APB2_GRP1_PERIPH_SPI5 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI1 + * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_SAI3 (*) + * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 + * @arg @ref LL_APB2_GRP1_PERIPH_HRTIM (*) + * + * (*) value not defined in all devices. + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB2_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB2LPENR, Periphs); +} + +/** + * @} + */ + +/** @addtogroup BUS_LL_EF_APB4 APB4 + * @{ + */ + +/** + * @brief Enable C2 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPUART1EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR SPI6EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR I2C4EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR COMP12EN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR VREFEN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_EnableClock\n + * APB4ENR SAI4EN LL_C2_APB4_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB4ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB4ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if C2 APB4 peripheral clock is enabled or not + * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPUART1EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR SPI6EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR I2C4EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR COMP12EN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR VREFEN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_IsEnabledClock\n + * APB4ENR SAI4EN LL_C2_APB4_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval uint32_t +*/ +__STATIC_INLINE uint32_t LL_C2_APB4_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC_C2->APB4ENR, Periphs) == Periphs) ? 1U : 0U); +} + +/** + * @brief Disable C2 APB4 peripherals clock. + * @rmtoll APB4ENR SYSCFGEN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPUART1EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR SPI6EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR I2C4EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM2EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM3EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM4EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR LPTIM5EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR COMP12EN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR VREFEN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR RTCAPBEN LL_C2_APB4_GRP1_DisableClock\n + * APB4ENR SAI4EN LL_C2_APB4_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB4ENR, Periphs); +} + +/** + * @brief Enable C2 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR VREFLPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_EnableClockSleep\n + * APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_EnableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_EnableClockSleep(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC_C2->APB4LPENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC_C2->APB4LPENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Disable C2 APB4 peripherals clock during Low Power (Sleep) mode. + * @rmtoll APB4LPENR SYSCFGLPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPUART1LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SPI6LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR I2C4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM2LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM3LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM4LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR LPTIM5LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR COMP12LPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR VREFLPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR RTCAPBLPEN LL_C2_APB4_GRP1_DisableClockSleep\n + * APB4LPENR SAI4LPEN LL_C2_APB4_GRP1_DisableClockSleep + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_APB4_GRP1_PERIPH_SYSCFG + * @arg @ref LL_APB4_GRP1_PERIPH_LPUART1 + * @arg @ref LL_APB4_GRP1_PERIPH_SPI6 + * @arg @ref LL_APB4_GRP1_PERIPH_I2C4 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM2 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM3 + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM4 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_LPTIM5 (*) + * @arg @ref LL_APB4_GRP1_PERIPH_COMP12 + * @arg @ref LL_APB4_GRP1_PERIPH_VREF + * @arg @ref LL_APB4_GRP1_PERIPH_RTCAPB + * @arg @ref LL_APB4_GRP1_PERIPH_SAI4 (*) + * + * (*) value not defined in all devices + * @retval None +*/ +__STATIC_INLINE void LL_C2_APB4_GRP1_DisableClockSleep(uint32_t Periphs) +{ + CLEAR_BIT(RCC_C2->APB4LPENR, Periphs); +} + +/** + * @} + */ + +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_BUS_H */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h new file mode 100644 index 0000000..2b63e8f --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_cortex.h @@ -0,0 +1,669 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + (+) API to enable fault handler (SHCSR accesses) + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_CORTEX_H +#define STM32H7xx_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000UL /*!< AHB clock divided by 8 selected as SysTick clock source.*/ +#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type + * @{ + */ +#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */ +#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */ +#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */ +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000UL /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00UL /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01UL /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02UL /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03UL /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04UL /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05UL /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06UL /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07UL /*!< REGION Number 7 */ +#if !defined(CORE_CM4) +#define LL_MPU_REGION_NUMBER8 0x08UL /*!< REGION Number 8 */ +#define LL_MPU_REGION_NUMBER9 0x09UL /*!< REGION Number 9 */ +#define LL_MPU_REGION_NUMBER10 0x0AUL /*!< REGION Number 10 */ +#define LL_MPU_REGION_NUMBER11 0x0BUL /*!< REGION Number 11 */ +#define LL_MPU_REGION_NUMBER12 0x0CUL /*!< REGION Number 12 */ +#define LL_MPU_REGION_NUMBER13 0x0DUL /*!< REGION Number 13 */ +#define LL_MPU_REGION_NUMBER14 0x0EUL /*!< REGION Number 14 */ +#define LL_MPU_REGION_NUMBER15 0x0FUL /*!< REGION Number 15 */ +#endif /* !defined(CORE_CM4) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_32B (0x04UL << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64B (0x05UL << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128B (0x06UL << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256B (0x07UL << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08UL << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09UL << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AUL << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BUL << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CUL << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DUL << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EUL << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FUL << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10UL << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11UL << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12UL << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13UL << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14UL << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15UL << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16UL << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17UL << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18UL << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19UL << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AUL << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BUL << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CUL << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DUL << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EUL << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FUL << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00UL << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01UL << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02UL << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03UL << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05UL << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06UL << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00UL << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01UL << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02UL << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ + +/* Legacy Define */ +#define LL_MPU_TEX_LEVEL4 (0x04UL << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00UL /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00UL /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00UL /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00UL /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + MODIFY_REG(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK, Source); +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8 + * @arg @ref LL_SYSTICK_CLKSOURCE_HCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return (uint32_t)(READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK)); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Configures sleep-on-exit when returning from Handler mode to Thread mode. + * @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an + * empty main application. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Do not sleep when returning to Thread mode. + * @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the + * processor. + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableEventOnPend(void) +{ + /* Set SEVEONPEND bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are + * excluded + * @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend + * @retval None + */ +__STATIC_INLINE void LL_LPM_DisableEventOnPend(void) +{ + /* Clear SEVEONPEND bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_HANDLER HANDLER + * @{ + */ + +/** + * @brief Enable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault) +{ + /* Enable the system handler fault */ + SET_BIT(SCB->SHCSR, Fault); +} + +/** + * @brief Disable a fault in System handler control register (SHCSR) + * @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault + * @param Fault This parameter can be a combination of the following values: + * @arg @ref LL_HANDLER_FAULT_USG + * @arg @ref LL_HANDLER_FAULT_BUS + * @arg @ref LL_HANDLER_FAULT_MEM + * @retval None + */ +__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault) +{ + /* Disable the system handler fault */ + CLEAR_BIT(SCB->SHCSR, Fault); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Constant number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant + * @retval Value should be equal to 0xF for Cortex-M7 and Cortex-M4 devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC27 for Cortex-M7 and equal to 0xC24 for Cortex-M4 + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @note For cortex-M4 only 8 regions are available i.e only values from LL_MPU_REGION_NUMBER0 to LL_MPU_REGION_NUMBER7 are possible. + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B + * or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB + * or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB + * or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB + * or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS + * or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @note For cortex-M4 only 8 regions are available i.e only values from LL_MPU_REGION_NUMBER0 to LL_MPU_REGION_NUMBER7 are possible. + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @arg @ref LL_MPU_REGION_NUMBER8 + * @arg @ref LL_MPU_REGION_NUMBER9 + * @arg @ref LL_MPU_REGION_NUMBER10 + * @arg @ref LL_MPU_REGION_NUMBER11 + * @arg @ref LL_MPU_REGION_NUMBER12 + * @arg @ref LL_MPU_REGION_NUMBER13 + * @arg @ref LL_MPU_REGION_NUMBER14 + * @arg @ref LL_MPU_REGION_NUMBER15 + * @note For cortex-M4 only 8 regions are available i.e only values from LL_MPU_REGION_NUMBER0 to LL_MPU_REGION_NUMBER7 are possible. + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_CORTEX_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h new file mode 100644 index 0000000..86ce847 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_crs.h @@ -0,0 +1,780 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_crs.h + * @author MCD Application Team + * @brief Header file of CRS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_CRS_H +#define STM32H7xx_LL_CRS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(CRS) + +/** @defgroup CRS_LL CRS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants + * @{ + */ + +/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_CRS_ReadReg function + * @{ + */ +#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF +#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF +#define LL_CRS_ISR_ERRF CRS_ISR_ERRF +#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF +#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR +#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS +#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF +/** + * @} + */ + +/** @defgroup CRS_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions + * @{ + */ +#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE +#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE +#define LL_CRS_CR_ERRIE CRS_CR_ERRIE +#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider + * @{ + */ +#define LL_CRS_SYNC_DIV_1 0x00000000U /*!< Synchro Signal not divided (default) */ +#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */ +#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */ +#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */ +#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */ +#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */ +#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */ +#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source + * @{ + */ +#define LL_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */ +#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */ +#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity + * @{ + */ +#define LL_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */ +#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction + * @{ + */ +#define LL_CRS_FREQ_ERROR_DIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */ +#define LL_CRS_FREQ_ERROR_DIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */ +/** + * @} + */ + +/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values + * @{ + */ +/** + * @brief Reset value of the RELOAD field + * @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz + * and a synchronization signal frequency of 1 kHz (SOF signal from USB) + */ +#define LL_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU + +/** + * @brief Reset value of Frequency error limit. + */ +#define LL_CRS_ERRORLIMIT_DEFAULT 0x00000022U + +/** + * @brief Reset value of the HSI48 Calibration field + * @note The default value is 64, which corresponds to the middle of the trimming interval. + * The trimming step is specified in the product datasheet. + * A higher TRIM value corresponds to a higher output frequency. + */ +#define LL_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros + * @{ + */ + +/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in CRS register + * @param __INSTANCE__ CRS Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload + * @{ + */ + +/** + * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies + * @note The RELOAD value should be selected according to the ratio between + * the target frequency and the frequency of the synchronization source after + * prescaling. It is then decreased by one in order to reach the expected + * synchronization on the zero value. The formula is the following: + * RELOAD = (fTARGET / fSYNC) -1 + * @param __FTARGET__ Target frequency (value in Hz) + * @param __FSYNC__ Synchronization signal frequency (value in Hz) + * @retval Reload value (in Hz) + */ +#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions + * @{ + */ + +/** @defgroup CRS_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable Frequency error counter + * @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified + * @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void) +{ + SET_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Disable Frequency error counter + * @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_CEN); +} + +/** + * @brief Check if Frequency error counter is enabled or not + * @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void) +{ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Disable Automatic trimming counter + * @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN); +} + +/** + * @brief Check if Automatic trimming is enabled or not + * @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI48 oscillator smooth trimming + * @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only + * @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming + * @param Value a number between Min_Data = 0 and Max_Data = 127 + * @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos); +} + +/** + * @brief Get HSI48 oscillator smooth trimming + * @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming + * @retval a number between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void) +{ + return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); +} + +/** + * @brief Set counter reload value + * @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter + * @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF + * @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT + * Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_) + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value); +} + +/** + * @brief Get counter reload value + * @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter + * @retval a number between Min_Data = 0 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); +} + +/** + * @brief Set frequency error limit + * @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit + * @param Value a number between Min_Data = 0 and Max_Data = 255 + * @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Get frequency error limit + * @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit + * @retval A number between Min_Data = 0 and Max_Data = 255 + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos); +} + +/** + * @brief Set division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider); +} + +/** + * @brief Get division factor for SYNC signal + * @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 + * @arg @ref LL_CRS_SYNC_DIV_2 + * @arg @ref LL_CRS_SYNC_DIV_4 + * @arg @ref LL_CRS_SYNC_DIV_8 + * @arg @ref LL_CRS_SYNC_DIV_16 + * @arg @ref LL_CRS_SYNC_DIV_32 + * @arg @ref LL_CRS_SYNC_DIV_64 + * @arg @ref LL_CRS_SYNC_DIV_128 + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV)); +} + +/** + * @brief Set SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source); +} + +/** + * @brief Get SYNC signal source + * @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO + * @arg @ref LL_CRS_SYNC_SOURCE_LSE + * @arg @ref LL_CRS_SYNC_SOURCE_USB + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC)); +} + +/** + * @brief Set input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity) +{ + MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity); +} + +/** + * @brief Get input polarity for the SYNC signal source + * @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_SYNC_POLARITY_RISING + * @arg @ref LL_CRS_SYNC_POLARITY_FALLING + */ +__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void) +{ + return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL)); +} + +/** + * @brief Configure CRS for the synchronization + * @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n + * CFGR RELOAD LL_CRS_ConfigSynchronization\n + * CFGR FELIM LL_CRS_ConfigSynchronization\n + * CFGR SYNCDIV LL_CRS_ConfigSynchronization\n + * CFGR SYNCSRC LL_CRS_ConfigSynchronization\n + * CFGR SYNCPOL LL_CRS_ConfigSynchronization + * @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63 + * @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF + * @param ReloadValue a number between Min_Data = 0 and Max_Data = 255 + * @param Settings This parameter can be a combination of the following values: + * @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8 + * or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128 + * @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB + * @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING + * @retval None + */ +__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings) +{ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue); + MODIFY_REG(CRS->CFGR, + CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL, + ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_CRS_Management CRS_Management + * @{ + */ + +/** + * @brief Generate software SYNC event + * @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Get the frequency error direction latched in the time of the last + * SYNC event + * @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRS_FREQ_ERROR_DIR_UP + * @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** + * @brief Get the frequency error counter value latched in the time of the last SYNC event + * @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture + * @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void) +{ + return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if SYNC event OK signal occurred or not + * @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC warning signal occurred or not + * @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Synchronization or trimming error signal occurred or not + * @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if Expected SYNC signal occurred or not + * @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC error signal occurred or not + * @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR)) ? 1UL : 0UL); +} + +/** + * @brief Check if SYNC missed error signal occurred or not + * @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS)) ? 1UL : 0UL); +} + +/** + * @brief Check if Trimming overflow or underflow occurred or not + * @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void) +{ + return ((READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the SYNC event OK flag + * @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); +} + +/** + * @brief Clear the SYNC warning flag + * @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); +} + +/** + * @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also + * the ERR flag + * @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); +} + +/** + * @brief Clear Expected SYNC flag + * @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void) +{ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); +} + +/** + * @} + */ + +/** @defgroup CRS_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Disable SYNC event OK interrupt + * @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE); +} + +/** + * @brief Check if SYNC event OK interrupt is enabled or not + * @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void) +{ + SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Disable SYNC warning interrupt + * @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE); +} + +/** + * @brief Check if SYNC warning interrupt is enabled or not + * @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_EnableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ERR(void) +{ + SET_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Disable Synchronization or trimming error interrupt + * @rmtoll CR ERRIE LL_CRS_DisableIT_ERR + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ERR(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ERRIE); +} + +/** + * @brief Check if Synchronization or trimming error interrupt is enabled or not + * @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void) +{ + SET_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Disable Expected SYNC interrupt + * @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC + * @retval None + */ +__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void) +{ + CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE); +} + +/** + * @brief Check if Expected SYNC interrupt is enabled or not + * @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void) +{ + return ((READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRS_DeInit(void); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRS) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_CRS_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h new file mode 100644 index 0000000..100a2c5 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dma.h @@ -0,0 +1,3287 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_DMA_H +#define STM32H7xx_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "stm32h7xx_ll_dmamux.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (DMA1) || defined (DMA2) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Variables DMA Private Variables + * @{ + */ +/* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ +static const uint8_t LL_DMA_STR_OFFSET_TAB[] = +{ + (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), + (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) +}; + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Macros DMA LL Private Macros + * @{ + */ +/** + * @brief Helper macro to convert DMA Instance DMAx into DMAMUX channel + * @note DMAMUX channel 0 to 7 are mapped to DMA1 stream 0 to 7. + * DMAMUX channel 8 to 15 are mapped to DMA2 stream 0 to 7. + * @param __DMA_INSTANCE__ DMAx + * @retval Channel_Offset (LL_DMAMUX_CHANNEL_8 or 0). + */ +#define LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(__DMA_INSTANCE__) \ +(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) ? 0UL : 8UL) +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Stream + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMAMUX1_Request_selection + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ + + uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. + This parameter can be a value of @ref DMA_LL_FIFOMODE + @note The Direct mode (FIFO mode disabled) cannot be used if the + memory-to-memory data transfer is configured on the selected stream + + This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ + + uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. + This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ + + uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_LL_EC_MBURST + @note The burst mode is possible only if the address Increment mode is enabled. + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ + + uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. + It specifies the amount of data to be transferred in a single non interruptible + transaction. + This parameter can be a value of @ref DMA_LL_EC_PBURST + @note The burst mode is possible only if the address Increment mode is enabled. + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_LL_EC_STREAM STREAM + * @{ + */ +#define LL_DMA_STREAM_0 0x00000000U +#define LL_DMA_STREAM_1 0x00000001U +#define LL_DMA_STREAM_2 0x00000002U +#define LL_DMA_STREAM_3 0x00000003U +#define LL_DMA_STREAM_4 0x00000004U +#define LL_DMA_STREAM_5 0x00000005U +#define LL_DMA_STREAM_6 0x00000006U +#define LL_DMA_STREAM_7 0x00000007U +#define LL_DMA_STREAM_ALL 0xFFFF0000U +/** + * @} + */ + + +/** @defgroup DMA_LL_EC_DIRECTION DIRECTION + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE MODE + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ +#define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLE BUFFER MODE + * @{ + */ +#define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ +#define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH PERIPH + * @{ + */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +#define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY MEMORY + * @{ + */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +#define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE + * @{ + */ +#define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ +#define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY PRIORITY + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_LL_EC_MBURST MBURST + * @{ + */ +#define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ +#define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ +#define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ +#define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PBURST PBURST + * @{ + */ +#define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ +#define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ +#define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ +#define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE + * @{ + */ +#define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ +#define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 + * @{ + */ +#define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ +#define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ +#define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ +#define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ +#define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ +#define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD + * @{ + */ +#define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ +#define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ +#define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ +#define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM + * @{ + */ +#define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ +#define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy + * @{ + */ +/** + * @brief Convert DMAx_Streamy into DMAx + * @param __STREAM_INSTANCE__ DMAx_Streamy + * @retval DMAx + */ +#define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ +(((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) + +/** + * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y + * @param __STREAM_INSTANCE__ DMAx_Streamy + * @retval LL_DMA_STREAM_y + */ +#define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ +(((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ + ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ + LL_DMA_STREAM_7) + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy + * @param __DMA_INSTANCE__ DMAx + * @param __STREAM__ LL_DMA_STREAM_y + * @retval DMAx_Streamy + */ +#define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ +((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ + DMA2_Stream7) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA stream. + * @rmtoll CR EN LL_DMA_EnableStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_EN); +} + +/** + * @brief Disable DMA stream. + * @rmtoll CR EN LL_DMA_DisableStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_EN); +} + +/** + * @brief Check if DMA stream is enabled or disabled. + * @rmtoll CR EN LL_DMA_IsEnabledStream + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters linked to DMA transfer. + * @rmtoll CR DIR LL_DMA_ConfigTransfer\n + * CR CIRC LL_DMA_ConfigTransfer\n + * CR PINC LL_DMA_ConfigTransfer\n + * CR MINC LL_DMA_ConfigTransfer\n + * CR PSIZE LL_DMA_ConfigTransfer\n + * CR MSIZE LL_DMA_ConfigTransfer\n + * CR PL LL_DMA_ConfigTransfer\n + * CR PFCTRL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + *@retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, + DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CR DIR LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DIR, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CR DIR LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DIR)); +} + +/** + * @brief Set DMA mode normal, circular or peripheral flow control. + * @rmtoll CR CIRC LL_DMA_SetMode\n + * CR PFCTRL LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_MODE_PFCTRL + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); +} + +/** + * @brief Get DMA mode normal, circular or peripheral flow control. + * @rmtoll CR CIRC LL_DMA_GetMode\n + * CR PFCTRL LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_MODE_PFCTRL + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param IncrementMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINC, IncrementMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_PERIPH_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param IncrementMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MINC, IncrementMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Size This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PSIZE, Size); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Size This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MSIZE, Size); +} + +/** + * @brief Get Memory size. + * @rmtoll CR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MSIZE)); +} + +/** + * @brief Set Peripheral increment offset size. + * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param OffsetSize This parameter can be one of the following values: + * @arg @ref LL_DMA_OFFSETSIZE_PSIZE + * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINCOS, OffsetSize); +} + +/** + * @brief Get Peripheral increment offset size. + * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_OFFSETSIZE_PSIZE + * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 + */ +__STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PINCOS)); +} + +/** + * @brief Set Stream priority level. + * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PL, Priority); +} + +/** + * @brief Get Stream priority level. + * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PL)); +} + +/** + * @brief Enable DMA stream bufferable transfer. + * @rmtoll CR TRBUFF LL_DMA_EnableBufferableTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableBufferableTransfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TRBUFF); +} + +/** + * @brief Disable DMA stream bufferable transfer. + * @rmtoll CR TRBUFF LL_DMA_DisableBufferableTransfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableBufferableTransfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TRBUFF); +} + +/** + * @brief Set Number of data to transfer. + * @rmtoll NDTR NDT LL_DMA_SetDataLength + * @note This action has no effect if + * stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param NbData Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t NbData) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->NDTR, DMA_SxNDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @rmtoll NDTR NDT LL_DMA_GetDataLength + * @note Once the stream is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->NDTR, DMA_SxNDT)); +} +/** + * @brief Set DMA request for DMA Streams on DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 stream 0 to 7. + * DMAMUX channel 8 to 15 are mapped to DMA2 stream 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Request) +{ + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(uint32_t)((uint32_t)DMAMUX1_Channel0 + (DMAMUX_CCR_SIZE * (Stream)) + (uint32_t)(DMAMUX_CCR_SIZE * LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(DMAx))))->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 stream 0 to 7. + * DMAMUX channel 8 to 15 are mapped to DMA2 stream 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * + * @note (*) Availability depends on devices. + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Stream) +{ + return (READ_BIT(((DMAMUX_Channel_TypeDef *)((uint32_t)((uint32_t)DMAMUX1_Channel0 + (DMAMUX_CCR_SIZE * (Stream)) + (uint32_t)(DMAMUX_CCR_SIZE * LL_DMA_INSTANCE_TO_DMAMUX_CHANNEL(DMAx)))))->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set Memory burst transfer configuration. + * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Mburst This parameter can be one of the following values: + * @arg @ref LL_DMA_MBURST_SINGLE + * @arg @ref LL_DMA_MBURST_INC4 + * @arg @ref LL_DMA_MBURST_INC8 + * @arg @ref LL_DMA_MBURST_INC16 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MBURST, Mburst); +} + +/** + * @brief Get Memory burst transfer configuration. + * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MBURST_SINGLE + * @arg @ref LL_DMA_MBURST_INC4 + * @arg @ref LL_DMA_MBURST_INC8 + * @arg @ref LL_DMA_MBURST_INC16 + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_MBURST)); +} + +/** + * @brief Set Peripheral burst transfer configuration. + * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Pburst This parameter can be one of the following values: + * @arg @ref LL_DMA_PBURST_SINGLE + * @arg @ref LL_DMA_PBURST_INC4 + * @arg @ref LL_DMA_PBURST_INC8 + * @arg @ref LL_DMA_PBURST_INC16 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PBURST, Pburst); +} + +/** + * @brief Get Peripheral burst transfer configuration. + * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PBURST_SINGLE + * @arg @ref LL_DMA_PBURST_INC4 + * @arg @ref LL_DMA_PBURST_INC8 + * @arg @ref LL_DMA_PBURST_INC16 + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_PBURST)); +} + +/** + * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. + * @rmtoll CR CT LL_DMA_SetCurrentTargetMem + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param CurrentMemory This parameter can be one of the following values: + * @arg @ref LL_DMA_CURRENTTARGETMEM0 + * @arg @ref LL_DMA_CURRENTTARGETMEM1 + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CT, CurrentMemory); +} + +/** + * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. + * @rmtoll CR CT LL_DMA_GetCurrentTargetMem + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_CURRENTTARGETMEM0 + * @arg @ref LL_DMA_CURRENTTARGETMEM1 + */ +__STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_CT)); +} + +/** + * @brief Enable the double buffer mode. + * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DBM); +} + +/** + * @brief Disable the double buffer mode. + * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DBM); +} + +/** + * @brief Get FIFO status. + * @rmtoll FCR FS LL_DMA_GetFIFOStatus + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_FIFOSTATUS_0_25 + * @arg @ref LL_DMA_FIFOSTATUS_25_50 + * @arg @ref LL_DMA_FIFOSTATUS_50_75 + * @arg @ref LL_DMA_FIFOSTATUS_75_100 + * @arg @ref LL_DMA_FIFOSTATUS_EMPTY + * @arg @ref LL_DMA_FIFOSTATUS_FULL + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FS)); +} + +/** + * @brief Disable Fifo mode. + * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_DMDIS); +} + +/** + * @brief Enable Fifo mode. + * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_DMDIS); +} + +/** + * @brief Select FIFO threshold. + * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FTH, Threshold); +} + +/** + * @brief Get FIFO threshold. + * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + */ +__STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FTH)); +} + +/** + * @brief Configure the FIFO . + * @rmtoll FCR FTH LL_DMA_ConfigFifo\n + * FCR DMDIS LL_DMA_ConfigFifo + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param FifoMode This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOMODE_ENABLE + * @arg @ref LL_DMA_FIFOMODE_DISABLE + * @param FifoThreshold This parameter can be one of the following values: + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 + * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 + * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FTH | DMA_SxFCR_DMDIS, FifoMode | FifoThreshold); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA stream is enabled. + * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n + * PAR PA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param SrcAddress Between 0 to 0xFFFFFFFF + * @param DstAddress Between 0 to 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, SrcAddress); + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, SrcAddress); + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @rmtoll PAR PA LL_DMA_SetPeriphAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param PeriphAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t PeriphAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, PeriphAddress); +} + +/** + * @brief Get the Memory address. + * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR)); +} + +/** + * @brief Get the Peripheral address. + * @rmtoll PAR PA LL_DMA_GetPeriphAddress + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA stream is enabled. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param MemoryAddress Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t MemoryAddress) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + WRITE_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->PAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (READ_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M0AR)); +} + +/** + * @brief Set Memory 1 address (used in case of Double buffer mode). + * @rmtoll M1AR M1A LL_DMA_SetMemory1Address + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @param Address Between 0 to 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + MODIFY_REG(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M1AR, DMA_SxM1AR_M1A, Address); +} + +/** + * @brief Get Memory 1 address (used in case of Double buffer mode). + * @rmtoll M1AR M1A LL_DMA_GetMemory1Address + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval Between 0 to 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return (((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->M1AR); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Stream 0 half transfer flag. + * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF0) == (DMA_LISR_HTIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 half transfer flag. + * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF1) == (DMA_LISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 half transfer flag. + * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF2) == (DMA_LISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 half transfer flag. + * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_HTIF3) == (DMA_LISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 half transfer flag. + * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF4) == (DMA_HISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 half transfer flag. + * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF5) == (DMA_HISR_HTIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 half transfer flag. + * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF6) == (DMA_HISR_HTIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 half transfer flag. + * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_HTIF7) == (DMA_HISR_HTIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 transfer complete flag. + * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF0) == (DMA_LISR_TCIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 transfer complete flag. + * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF1) == (DMA_LISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 transfer complete flag. + * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF2) == (DMA_LISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 transfer complete flag. + * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TCIF3) == (DMA_LISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 transfer complete flag. + * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF4) == (DMA_HISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 transfer complete flag. + * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF5) == (DMA_HISR_TCIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 transfer complete flag. + * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF6) == (DMA_HISR_TCIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 transfer complete flag. + * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TCIF7) == (DMA_HISR_TCIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 transfer error flag. + * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF0) == (DMA_LISR_TEIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 transfer error flag. + * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF1) == (DMA_LISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 transfer error flag. + * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF2) == (DMA_LISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 transfer error flag. + * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_TEIF3) == (DMA_LISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 transfer error flag. + * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF4) == (DMA_HISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 transfer error flag. + * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF5) == (DMA_HISR_TEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 transfer error flag. + * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF6) == (DMA_HISR_TEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 transfer error flag. + * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_TEIF7) == (DMA_HISR_TEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 direct mode error flag. + * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF0) == (DMA_LISR_DMEIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 direct mode error flag. + * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF1) == (DMA_LISR_DMEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 direct mode error flag. + * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF2) == (DMA_LISR_DMEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 direct mode error flag. + * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_DMEIF3) == (DMA_LISR_DMEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 direct mode error flag. + * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF4) == (DMA_HISR_DMEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 direct mode error flag. + * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF5) == (DMA_HISR_DMEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 direct mode error flag. + * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF6) == (DMA_HISR_DMEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 direct mode error flag. + * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_DMEIF7) == (DMA_HISR_DMEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 0 FIFO error flag. + * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF0) == (DMA_LISR_FEIF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 1 FIFO error flag. + * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF1) == (DMA_LISR_FEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 2 FIFO error flag. + * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF2) == (DMA_LISR_FEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 3 FIFO error flag. + * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->LISR, DMA_LISR_FEIF3) == (DMA_LISR_FEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 4 FIFO error flag. + * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF4) == (DMA_HISR_FEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 5 FIFO error flag. + * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF5) == (DMA_HISR_FEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 6 FIFO error flag. + * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF6) == (DMA_HISR_FEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Stream 7 FIFO error flag. + * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) +{ + return ((READ_BIT(DMAx->HISR, DMA_HISR_FEIF7) == (DMA_HISR_FEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Clear Stream 0 half transfer flag. + * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF0); +} + +/** + * @brief Clear Stream 1 half transfer flag. + * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF1); +} + +/** + * @brief Clear Stream 2 half transfer flag. + * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF2); +} + +/** + * @brief Clear Stream 3 half transfer flag. + * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CHTIF3); +} + +/** + * @brief Clear Stream 4 half transfer flag. + * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF4); +} + +/** + * @brief Clear Stream 5 half transfer flag. + * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF5); +} + +/** + * @brief Clear Stream 6 half transfer flag. + * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF6); +} + +/** + * @brief Clear Stream 7 half transfer flag. + * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CHTIF7); +} + +/** + * @brief Clear Stream 0 transfer complete flag. + * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF0); +} + +/** + * @brief Clear Stream 1 transfer complete flag. + * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF1); +} + +/** + * @brief Clear Stream 2 transfer complete flag. + * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF2); +} + +/** + * @brief Clear Stream 3 transfer complete flag. + * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTCIF3); +} + +/** + * @brief Clear Stream 4 transfer complete flag. + * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF4); +} + +/** + * @brief Clear Stream 5 transfer complete flag. + * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF5); +} + +/** + * @brief Clear Stream 6 transfer complete flag. + * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF6); +} + +/** + * @brief Clear Stream 7 transfer complete flag. + * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTCIF7); +} + +/** + * @brief Clear Stream 0 transfer error flag. + * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF0); +} + +/** + * @brief Clear Stream 1 transfer error flag. + * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF1); +} + +/** + * @brief Clear Stream 2 transfer error flag. + * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF2); +} + +/** + * @brief Clear Stream 3 transfer error flag. + * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CTEIF3); +} + +/** + * @brief Clear Stream 4 transfer error flag. + * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF4); +} + +/** + * @brief Clear Stream 5 transfer error flag. + * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF5); +} + +/** + * @brief Clear Stream 6 transfer error flag. + * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF6); +} + +/** + * @brief Clear Stream 7 transfer error flag. + * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CTEIF7); +} + +/** + * @brief Clear Stream 0 direct mode error flag. + * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF0); +} + +/** + * @brief Clear Stream 1 direct mode error flag. + * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF1); +} + +/** + * @brief Clear Stream 2 direct mode error flag. + * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF2); +} + +/** + * @brief Clear Stream 3 direct mode error flag. + * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CDMEIF3); +} + +/** + * @brief Clear Stream 4 direct mode error flag. + * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF4); +} + +/** + * @brief Clear Stream 5 direct mode error flag. + * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF5); +} + +/** + * @brief Clear Stream 6 direct mode error flag. + * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF6); +} + +/** + * @brief Clear Stream 7 direct mode error flag. + * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CDMEIF7); +} + +/** + * @brief Clear Stream 0 FIFO error flag. + * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF0); +} + +/** + * @brief Clear Stream 1 FIFO error flag. + * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF1); +} + +/** + * @brief Clear Stream 2 FIFO error flag. + * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF2); +} + +/** + * @brief Clear Stream 3 FIFO error flag. + * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->LIFCR, DMA_LIFCR_CFEIF3); +} + +/** + * @brief Clear Stream 4 FIFO error flag. + * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF4); +} + +/** + * @brief Clear Stream 5 FIFO error flag. + * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF5); +} + +/** + * @brief Clear Stream 6 FIFO error flag. + * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF6); +} + +/** + * @brief Clear Stream 7 FIFO error flag. + * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) +{ + WRITE_REG(DMAx->HIFCR, DMA_HIFCR_CFEIF7); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TEIE); +} + +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TCIE); +} + +/** + * @brief Enable Direct mode error interrupt. + * @rmtoll CR DMEIE LL_DMA_EnableIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DMEIE); +} + +/** + * @brief Enable FIFO error interrupt. + * @rmtoll FCR FEIE LL_DMA_EnableIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + SET_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FEIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TCIE); +} + +/** + * @brief Disable Direct mode error interrupt. + * @rmtoll CR DMEIE LL_DMA_DisableIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DMEIE); +} + +/** + * @brief Disable FIFO error interrupt. + * @rmtoll FCR FEIE LL_DMA_DisableIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + CLEAR_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FEIE); +} + +/** + * @brief Check if Half transfer interrupt is enabled. + * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error nterrup is enabled. + * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer complete interrupt is enabled. + * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE) ? 1UL : 0UL); +} + +/** + * @brief Check if Direct mode error interrupt is enabled. + * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE) ? 1UL : 0UL); +} + +/** + * @brief Check if FIFO error interrupt is enabled. + * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE + * @param DMAx DMAx Instance + * @param Stream This parameter can be one of the following values: + * @arg @ref LL_DMA_STREAM_0 + * @arg @ref LL_DMA_STREAM_1 + * @arg @ref LL_DMA_STREAM_2 + * @arg @ref LL_DMA_STREAM_3 + * @arg @ref LL_DMA_STREAM_4 + * @arg @ref LL_DMA_STREAM_5 + * @arg @ref LL_DMA_STREAM_6 + * @arg @ref LL_DMA_STREAM_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) +{ + uint32_t dma_base_addr = (uint32_t)DMAx; + + return ((READ_BIT(((DMA_Stream_TypeDef *)(dma_base_addr + LL_DMA_STR_OFFSET_TAB[Stream]))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); +uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 || DMA2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_DMA_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h new file mode 100644 index 0000000..bf4cffa --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_dmamux.h @@ -0,0 +1,2436 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_DMAMUX_H +#define STM32H7xx_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) || defined (DMAMUX2) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004U + +/* Define used to get DMAMUX RGCR register size */ +#define DMAMUX_RGCR_SIZE 0x00000004U + +/* Define used to get DMAMUX RequestGenerator offset */ +#define DMAMUX_REQ_GEN_OFFSET (DMAMUX1_RequestGenerator0_BASE - DMAMUX1_BASE) +/* Define used to get DMAMUX Channel Status offset */ +#define DMAMUX_CH_STATUS_OFFSET (DMAMUX1_ChannelStatus_BASE - DMAMUX1_BASE) +/* Define used to get DMAMUX RequestGenerator status offset */ +#define DMAMUX_REQ_GEN_STATUS_OFFSET (DMAMUX1_RequestGenStatus_BASE - DMAMUX1_BASE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ +/** @defgroup DMAMUX_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_WriteReg function + * @{ + */ +#define LL_DMAMUX_CFR_CSOF0 DMAMUX_CFR_CSOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CFR_CSOF1 DMAMUX_CFR_CSOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CFR_CSOF2 DMAMUX_CFR_CSOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CFR_CSOF3 DMAMUX_CFR_CSOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CFR_CSOF9 DMAMUX_CFR_CSOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CFR_CSOF10 DMAMUX_CFR_CSOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CFR_CSOF11 DMAMUX_CFR_CSOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#define LL_DMAMUX_CFR_CSOF12 DMAMUX_CFR_CSOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ +#define LL_DMAMUX_CFR_CSOF13 DMAMUX_CFR_CSOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#define LL_DMAMUX_CFR_CSOF14 DMAMUX_CFR_CSOF14 /*!< Synchronization Event Overrun Flag Channel 14 */ +#define LL_DMAMUX_CFR_CSOF15 DMAMUX_CFR_CSOF15 /*!< Synchronization Event Overrun Flag Channel 15 */ +#define LL_DMAMUX_RGCFR_RGCOF0 DMAMUX_RGCFR_COF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF1 DMAMUX_RGCFR_COF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF2 DMAMUX_RGCFR_COF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF3 DMAMUX_RGCFR_COF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF4 DMAMUX_RGCFR_COF4 /*!< Request Generator 4 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF5 DMAMUX_RGCFR_COF5 /*!< Request Generator 5 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF6 DMAMUX_RGCFR_COF6 /*!< Request Generator 6 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGCFR_RGCOF7 DMAMUX_RGCFR_COF7 /*!< Request Generator 7 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMAMUX_ReadReg function + * @{ + */ +#define LL_DMAMUX_CSR_SOF0 DMAMUX_CSR_SOF0 /*!< Synchronization Event Overrun Flag Channel 0 */ +#define LL_DMAMUX_CSR_SOF1 DMAMUX_CSR_SOF1 /*!< Synchronization Event Overrun Flag Channel 1 */ +#define LL_DMAMUX_CSR_SOF2 DMAMUX_CSR_SOF2 /*!< Synchronization Event Overrun Flag Channel 2 */ +#define LL_DMAMUX_CSR_SOF3 DMAMUX_CSR_SOF3 /*!< Synchronization Event Overrun Flag Channel 3 */ +#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */ +#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */ +#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */ +#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */ +#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */ +#define LL_DMAMUX_CSR_SOF9 DMAMUX_CSR_SOF9 /*!< Synchronization Event Overrun Flag Channel 9 */ +#define LL_DMAMUX_CSR_SOF10 DMAMUX_CSR_SOF10 /*!< Synchronization Event Overrun Flag Channel 10 */ +#define LL_DMAMUX_CSR_SOF11 DMAMUX_CSR_SOF11 /*!< Synchronization Event Overrun Flag Channel 11 */ +#define LL_DMAMUX_CSR_SOF12 DMAMUX_CSR_SOF12 /*!< Synchronization Event Overrun Flag Channel 12 */ +#define LL_DMAMUX_CSR_SOF13 DMAMUX_CSR_SOF13 /*!< Synchronization Event Overrun Flag Channel 13 */ +#define LL_DMAMUX_CSR_SOF14 DMAMUX_CSR_SOF14 /*!< Synchronization Event Overrun Flag Channel 14 */ +#define LL_DMAMUX_CSR_SOF15 DMAMUX_CSR_SOF15 /*!< Synchronization Event Overrun Flag Channel 15 */ +#define LL_DMAMUX_RGSR_RGOF0 DMAMUX_RGSR_OF0 /*!< Request Generator 0 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF1 DMAMUX_RGSR_OF1 /*!< Request Generator 1 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF2 DMAMUX_RGSR_OF2 /*!< Request Generator 2 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF3 DMAMUX_RGSR_OF3 /*!< Request Generator 3 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF4 DMAMUX_RGSR_OF4 /*!< Request Generator 4 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF5 DMAMUX_RGSR_OF5 /*!< Request Generator 5 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF6 DMAMUX_RGSR_OF6 /*!< Request Generator 6 Trigger Event Overrun Flag */ +#define LL_DMAMUX_RGSR_RGOF7 DMAMUX_RGSR_OF7 /*!< Request Generator 7 Trigger Event Overrun Flag */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMAMUX_WriteReg functions + * @{ + */ +#define LL_DMAMUX_CCR_SOIE DMAMUX_CxCR_SOIE /*!< Synchronization Event Overrun Interrupt */ +#define LL_DMAMUX_RGCR_RGOIE DMAMUX_RGxCR_OIE /*!< Request Generation Trigger Event Overrun Interrupt */ +/** + * @} + */ + +/** @defgroup DMAMUX1_Request_selection DMAMUX1 Request selection + * @brief DMAMUX1 Request selection + * @{ + */ +/* DMAMUX1 requests */ +#define LL_DMAMUX1_REQ_MEM2MEM 0U /*!< memory to memory transfer */ +#define LL_DMAMUX1_REQ_GENERATOR0 1U /*!< DMAMUX1 request generator 0 */ +#define LL_DMAMUX1_REQ_GENERATOR1 2U /*!< DMAMUX1 request generator 1 */ +#define LL_DMAMUX1_REQ_GENERATOR2 3U /*!< DMAMUX1 request generator 2 */ +#define LL_DMAMUX1_REQ_GENERATOR3 4U /*!< DMAMUX1 request generator 3 */ +#define LL_DMAMUX1_REQ_GENERATOR4 5U /*!< DMAMUX1 request generator 4 */ +#define LL_DMAMUX1_REQ_GENERATOR5 6U /*!< DMAMUX1 request generator 5 */ +#define LL_DMAMUX1_REQ_GENERATOR6 7U /*!< DMAMUX1 request generator 6 */ +#define LL_DMAMUX1_REQ_GENERATOR7 8U /*!< DMAMUX1 request generator 7 */ +#define LL_DMAMUX1_REQ_ADC1 9U /*!< DMAMUX1 ADC1 request */ +#define LL_DMAMUX1_REQ_ADC2 10U /*!< DMAMUX1 ADC2 request */ +#define LL_DMAMUX1_REQ_TIM1_CH1 11U /*!< DMAMUX1 TIM1 CH1 request */ +#define LL_DMAMUX1_REQ_TIM1_CH2 12U /*!< DMAMUX1 TIM1 CH2 request */ +#define LL_DMAMUX1_REQ_TIM1_CH3 13U /*!< DMAMUX1 TIM1 CH3 request */ +#define LL_DMAMUX1_REQ_TIM1_CH4 14U /*!< DMAMUX1 TIM1 CH4 request */ +#define LL_DMAMUX1_REQ_TIM1_UP 15U /*!< DMAMUX1 TIM1 UP request */ +#define LL_DMAMUX1_REQ_TIM1_TRIG 16U /*!< DMAMUX1 TIM1 TRIG request */ +#define LL_DMAMUX1_REQ_TIM1_COM 17U /*!< DMAMUX1 TIM1 COM request */ +#define LL_DMAMUX1_REQ_TIM2_CH1 18U /*!< DMAMUX1 TIM2 CH1 request */ +#define LL_DMAMUX1_REQ_TIM2_CH2 19U /*!< DMAMUX1 TIM2 CH2 request */ +#define LL_DMAMUX1_REQ_TIM2_CH3 20U /*!< DMAMUX1 TIM2 CH3 request */ +#define LL_DMAMUX1_REQ_TIM2_CH4 21U /*!< DMAMUX1 TIM2 CH4 request */ +#define LL_DMAMUX1_REQ_TIM2_UP 22U /*!< DMAMUX1 TIM2 UP request */ +#define LL_DMAMUX1_REQ_TIM3_CH1 23U /*!< DMAMUX1 TIM3 CH1 request */ +#define LL_DMAMUX1_REQ_TIM3_CH2 24U /*!< DMAMUX1 TIM3 CH2 request */ +#define LL_DMAMUX1_REQ_TIM3_CH3 25U /*!< DMAMUX1 TIM3 CH3 request */ +#define LL_DMAMUX1_REQ_TIM3_CH4 26U /*!< DMAMUX1 TIM3 CH4 request */ +#define LL_DMAMUX1_REQ_TIM3_UP 27U /*!< DMAMUX1 TIM3 UP request */ +#define LL_DMAMUX1_REQ_TIM3_TRIG 28U /*!< DMAMUX1 TIM3 TRIG request */ +#define LL_DMAMUX1_REQ_TIM4_CH1 29U /*!< DMAMUX1 TIM4 CH1 request */ +#define LL_DMAMUX1_REQ_TIM4_CH2 30U /*!< DMAMUX1 TIM4 CH2 request */ +#define LL_DMAMUX1_REQ_TIM4_CH3 31U /*!< DMAMUX1 TIM4 CH3 request */ +#define LL_DMAMUX1_REQ_TIM4_UP 32U /*!< DMAMUX1 TIM4 UP request */ +#define LL_DMAMUX1_REQ_I2C1_RX 33U /*!< DMAMUX1 I2C1 RX request */ +#define LL_DMAMUX1_REQ_I2C1_TX 34U /*!< DMAMUX1 I2C1 TX request */ +#define LL_DMAMUX1_REQ_I2C2_RX 35U /*!< DMAMUX1 I2C2 RX request */ +#define LL_DMAMUX1_REQ_I2C2_TX 36U /*!< DMAMUX1 I2C2 TX request */ +#define LL_DMAMUX1_REQ_SPI1_RX 37U /*!< DMAMUX1 SPI1 RX request */ +#define LL_DMAMUX1_REQ_SPI1_TX 38U /*!< DMAMUX1 SPI1 TX request */ +#define LL_DMAMUX1_REQ_SPI2_RX 39U /*!< DMAMUX1 SPI2 RX request */ +#define LL_DMAMUX1_REQ_SPI2_TX 40U /*!< DMAMUX1 SPI2 TX request */ +#define LL_DMAMUX1_REQ_USART1_RX 41U /*!< DMAMUX1 USART1 RX request */ +#define LL_DMAMUX1_REQ_USART1_TX 42U /*!< DMAMUX1 USART1 TX request */ +#define LL_DMAMUX1_REQ_USART2_RX 43U /*!< DMAMUX1 USART2 RX request */ +#define LL_DMAMUX1_REQ_USART2_TX 44U /*!< DMAMUX1 USART2 TX request */ +#define LL_DMAMUX1_REQ_USART3_RX 45U /*!< DMAMUX1 USART3 RX request */ +#define LL_DMAMUX1_REQ_USART3_TX 46U /*!< DMAMUX1 USART3 TX request */ +#define LL_DMAMUX1_REQ_TIM8_CH1 47U /*!< DMAMUX1 TIM8 CH1 request */ +#define LL_DMAMUX1_REQ_TIM8_CH2 48U /*!< DMAMUX1 TIM8 CH2 request */ +#define LL_DMAMUX1_REQ_TIM8_CH3 49U /*!< DMAMUX1 TIM8 CH3 request */ +#define LL_DMAMUX1_REQ_TIM8_CH4 50U /*!< DMAMUX1 TIM8 CH4 request */ +#define LL_DMAMUX1_REQ_TIM8_UP 51U /*!< DMAMUX1 TIM8 UP request */ +#define LL_DMAMUX1_REQ_TIM8_TRIG 52U /*!< DMAMUX1 TIM8 TRIG request */ +#define LL_DMAMUX1_REQ_TIM8_COM 53U /*!< DMAMUX1 TIM8 COM request */ +#define LL_DMAMUX1_REQ_TIM5_CH1 55U /*!< DMAMUX1 TIM5 CH1 request */ +#define LL_DMAMUX1_REQ_TIM5_CH2 56U /*!< DMAMUX1 TIM5 CH2 request */ +#define LL_DMAMUX1_REQ_TIM5_CH3 57U /*!< DMAMUX1 TIM5 CH3 request */ +#define LL_DMAMUX1_REQ_TIM5_CH4 58U /*!< DMAMUX1 TIM5 CH4 request */ +#define LL_DMAMUX1_REQ_TIM5_UP 59U /*!< DMAMUX1 TIM5 UP request */ +#define LL_DMAMUX1_REQ_TIM5_TRIG 60U /*!< DMAMUX1 TIM5 TRIG request */ +#define LL_DMAMUX1_REQ_SPI3_RX 61U /*!< DMAMUX1 SPI3 RX request */ +#define LL_DMAMUX1_REQ_SPI3_TX 62U /*!< DMAMUX1 SPI3 TX request */ +#define LL_DMAMUX1_REQ_UART4_RX 63U /*!< DMAMUX1 UART4 RX request */ +#define LL_DMAMUX1_REQ_UART4_TX 64U /*!< DMAMUX1 UART4 TX request */ +#define LL_DMAMUX1_REQ_UART5_RX 65U /*!< DMAMUX1 UART5 RX request */ +#define LL_DMAMUX1_REQ_UART5_TX 66U /*!< DMAMUX1 UART5 TX request */ +#define LL_DMAMUX1_REQ_DAC1_CH1 67U /*!< DMAMUX1 DAC1 Channel 1 request */ +#define LL_DMAMUX1_REQ_DAC1_CH2 68U /*!< DMAMUX1 DAC1 Channel 2 request */ +#define LL_DMAMUX1_REQ_TIM6_UP 69U /*!< DMAMUX1 TIM6 UP request */ +#define LL_DMAMUX1_REQ_TIM7_UP 70U /*!< DMAMUX1 TIM7 UP request */ +#define LL_DMAMUX1_REQ_USART6_RX 71U /*!< DMAMUX1 USART6 RX request */ +#define LL_DMAMUX1_REQ_USART6_TX 72U /*!< DMAMUX1 USART6 TX request */ +#define LL_DMAMUX1_REQ_I2C3_RX 73U /*!< DMAMUX1 I2C3 RX request */ +#define LL_DMAMUX1_REQ_I2C3_TX 74U /*!< DMAMUX1 I2C3 TX request */ +#if defined (PSSI) +#define LL_DMAMUX1_REQ_DCMI_PSSI 75U /*!< DMAMUX1 DCMI/PSSI request */ +#define LL_DMAMUX1_REQ_DCMI LL_DMAMUX1_REQ_DCMI_PSSI /* Legacy define */ +#else +#define LL_DMAMUX1_REQ_DCMI 75U /*!< DMAMUX1 DCMI request */ +#endif /* PSSI */ +#define LL_DMAMUX1_REQ_CRYP_IN 76U /*!< DMAMUX1 CRYP IN request */ +#define LL_DMAMUX1_REQ_CRYP_OUT 77U /*!< DMAMUX1 CRYP OUT request */ +#define LL_DMAMUX1_REQ_HASH_IN 78U /*!< DMAMUX1 HASH IN request */ +#define LL_DMAMUX1_REQ_UART7_RX 79U /*!< DMAMUX1 UART7 RX request */ +#define LL_DMAMUX1_REQ_UART7_TX 80U /*!< DMAMUX1 UART7 TX request */ +#define LL_DMAMUX1_REQ_UART8_RX 81U /*!< DMAMUX1 UART8 RX request */ +#define LL_DMAMUX1_REQ_UART8_TX 82U /*!< DMAMUX1 UART8 TX request */ +#define LL_DMAMUX1_REQ_SPI4_RX 83U /*!< DMAMUX1 SPI4 RX request */ +#define LL_DMAMUX1_REQ_SPI4_TX 84U /*!< DMAMUX1 SPI4 TX request */ +#define LL_DMAMUX1_REQ_SPI5_RX 85U /*!< DMAMUX1 SPI5 RX request */ +#define LL_DMAMUX1_REQ_SPI5_TX 86U /*!< DMAMUX1 SPI5 TX request */ +#define LL_DMAMUX1_REQ_SAI1_A 87U /*!< DMAMUX1 SAI1 A request */ +#define LL_DMAMUX1_REQ_SAI1_B 88U /*!< DMAMUX1 SAI1 B request */ +#if defined(SAI2) +#define LL_DMAMUX1_REQ_SAI2_A 89U /*!< DMAMUX1 SAI2 A request */ +#define LL_DMAMUX1_REQ_SAI2_B 90U /*!< DMAMUX1 SAI2 B request */ +#endif /* SAI2 */ +#define LL_DMAMUX1_REQ_SWPMI_RX 91U /*!< DMAMUX1 SWPMI RX request */ +#define LL_DMAMUX1_REQ_SWPMI_TX 92U /*!< DMAMUX1 SWPMI TX request */ +#define LL_DMAMUX1_REQ_SPDIF_RX_DT 93U /*!< DMAMUX1 SPDIF RXDT request */ +#define LL_DMAMUX1_REQ_SPDIF_RX_CS 94U /*!< DMAMUX1 SPDIF RXCS request */ +#if defined (HRTIM1) +#define LL_DMAMUX1_REQ_HRTIM_MASTER 95U /*!< DMAMUX1 HRTIM1 Master request 1 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_A 96U /*!< DMAMUX1 HRTIM1 Timer A request 2 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_B 97U /*!< DMAMUX1 HRTIM1 Timer B request 3 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_C 98U /*!< DMAMUX1 HRTIM1 Timer C request 4 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_D 99U /*!< DMAMUX1 HRTIM1 Timer D request 5 */ +#define LL_DMAMUX1_REQ_HRTIM_TIMER_E 100U /*!< DMAMUX1 HRTIM1 Timer E request 6 */ +#endif /* HRTIM1 */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT0 101U /*!< DMAMUX1 DFSDM1 Filter0 request */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT1 102U /*!< DMAMUX1 DFSDM1 Filter1 request */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT2 103U /*!< DMAMUX1 DFSDM1 Filter2 request */ +#define LL_DMAMUX1_REQ_DFSDM1_FLT3 104U /*!< DMAMUX1 DFSDM1 Filter3 request */ +#define LL_DMAMUX1_REQ_TIM15_CH1 105U /*!< DMAMUX1 TIM15 CH1 request */ +#define LL_DMAMUX1_REQ_TIM15_UP 106U /*!< DMAMUX1 TIM15 UP request */ +#define LL_DMAMUX1_REQ_TIM15_TRIG 107U /*!< DMAMUX1 TIM15 TRIG request */ +#define LL_DMAMUX1_REQ_TIM15_COM 108U /*!< DMAMUX1 TIM15 COM request */ +#define LL_DMAMUX1_REQ_TIM16_CH1 109U /*!< DMAMUX1 TIM16 CH1 request */ +#define LL_DMAMUX1_REQ_TIM16_UP 110U /*!< DMAMUX1 TIM16 UP request */ +#define LL_DMAMUX1_REQ_TIM17_CH1 111U /*!< DMAMUX1 TIM17 CH1 request */ +#define LL_DMAMUX1_REQ_TIM17_UP 112U /*!< DMAMUX1 TIM17 UP request */ +#if defined (SAI3) +#define LL_DMAMUX1_REQ_SAI3_A 113U /*!< DMAMUX1 SAI3 A request */ +#define LL_DMAMUX1_REQ_SAI3_B 114U /*!< DMAMUX1 SAI3 B request */ +#endif /* SAI3 */ +#if defined (ADC3) +#define LL_DMAMUX1_REQ_ADC3 115U /*!< DMAMUX1 ADC3 request */ +#endif /* ADC3 */ +#if defined (UART9) +#define LL_DMAMUX1_REQ_UART9_RX 116U /*!< DMAMUX1 UART9 RX request */ +#define LL_DMAMUX1_REQ_UART9_TX 117U /*!< DMAMUX1 UART9 TX request */ +#endif /* UART9 */ +#if defined (USART10) +#define LL_DMAMUX1_REQ_USART10_RX 118U /*!< DMAMUX1 USART10 RX request */ +#define LL_DMAMUX1_REQ_USART10_TX 119U /*!< DMAMUX1 USART10 TX request */ +#endif /* USART10 */ +#if defined(FMAC) +#define LL_DMAMUX1_REQ_FMAC_READ 120U /*!< DMAMUX1 FMAC Read request */ +#define LL_DMAMUX1_REQ_FMAC_WRITE 121U /*!< DMAMUX1 FMAC Write request */ +#endif /* FMAC */ +#if defined(CORDIC) +#define LL_DMAMUX1_REQ_CORDIC_READ 122U /*!< DMAMUX1 CORDIC Read request */ +#define LL_DMAMUX1_REQ_CORDIC_WRITE 123U /*!< DMAMUX1 CORDIC Write request */ +#endif /* CORDIC */ +#if defined(I2C5) +#define LL_DMAMUX1_REQ_I2C5_RX 124U /*!< DMAMUX1 I2C5 RX request */ +#define LL_DMAMUX1_REQ_I2C5_TX 125U /*!< DMAMUX1 I2C5 TX request */ +#endif /* I2C5 */ +#if defined(TIM23) +#define LL_DMAMUX1_REQ_TIM23_CH1 126U /*!< DMAMUX1 TIM23 CH1 request */ +#define LL_DMAMUX1_REQ_TIM23_CH2 127U /*!< DMAMUX1 TIM23 CH2 request */ +#define LL_DMAMUX1_REQ_TIM23_CH3 128U /*!< DMAMUX1 TIM23 CH3 request */ +#define LL_DMAMUX1_REQ_TIM23_CH4 129U /*!< DMAMUX1 TIM23 CH4 request */ +#define LL_DMAMUX1_REQ_TIM23_UP 130U /*!< DMAMUX1 TIM23 UP request */ +#define LL_DMAMUX1_REQ_TIM23_TRIG 131U /*!< DMAMUX1 TIM23 TRIG request */ +#endif /* TIM23 */ +#if defined(TIM24) +#define LL_DMAMUX1_REQ_TIM24_CH1 132U /*!< DMAMUX1 TIM24 CH1 request */ +#define LL_DMAMUX1_REQ_TIM24_CH2 133U /*!< DMAMUX1 TIM24 CH2 request */ +#define LL_DMAMUX1_REQ_TIM24_CH3 134U /*!< DMAMUX1 TIM24 CH3 request */ +#define LL_DMAMUX1_REQ_TIM24_CH4 135U /*!< DMAMUX1 TIM24 CH4 request */ +#define LL_DMAMUX1_REQ_TIM24_UP 136U /*!< DMAMUX1 TIM24 UP request */ +#define LL_DMAMUX1_REQ_TIM24_TRIG 137U /*!< DMAMUX1 TIM24 TRIG request */ +#endif /* TIM24 */ +/** + * @} + */ + +/** @defgroup DMAMUX2_Request_selection DMAMUX2 Request selection + * @brief DMAMUX2 Request selection + * @{ + */ +/* DMAMUX2 requests */ +#define LL_DMAMUX2_REQ_MEM2MEM 0U /*!< memory to memory transfer */ +#define LL_DMAMUX2_REQ_GENERATOR0 1U /*!< DMAMUX2 request generator 0 */ +#define LL_DMAMUX2_REQ_GENERATOR1 2U /*!< DMAMUX2 request generator 1 */ +#define LL_DMAMUX2_REQ_GENERATOR2 3U /*!< DMAMUX2 request generator 2 */ +#define LL_DMAMUX2_REQ_GENERATOR3 4U /*!< DMAMUX2 request generator 3 */ +#define LL_DMAMUX2_REQ_GENERATOR4 5U /*!< DMAMUX2 request generator 4 */ +#define LL_DMAMUX2_REQ_GENERATOR5 6U /*!< DMAMUX2 request generator 5 */ +#define LL_DMAMUX2_REQ_GENERATOR6 7U /*!< DMAMUX2 request generator 6 */ +#define LL_DMAMUX2_REQ_GENERATOR7 8U /*!< DMAMUX2 request generator 7 */ +#define LL_DMAMUX2_REQ_LPUART1_RX 9U /*!< DMAMUX2 LP_UART1_RX request */ +#define LL_DMAMUX2_REQ_LPUART1_TX 10U /*!< DMAMUX2 LP_UART1_TX request */ +#define LL_DMAMUX2_REQ_SPI6_RX 11U /*!< DMAMUX2 SPI6 RX request */ +#define LL_DMAMUX2_REQ_SPI6_TX 12U /*!< DMAMUX2 SPI6 TX request */ +#define LL_DMAMUX2_REQ_I2C4_RX 13U /*!< DMAMUX2 I2C4 RX request */ +#define LL_DMAMUX2_REQ_I2C4_TX 14U /*!< DMAMUX2 I2C4 TX request */ +#if defined (SAI4) +#define LL_DMAMUX2_REQ_SAI4_A 15U /*!< DMAMUX2 SAI4 A request */ +#define LL_DMAMUX2_REQ_SAI4_B 16U /*!< DMAMUX2 SAI4 B request */ +#endif /* SAI4 */ +#if defined (ADC3) +#define LL_DMAMUX2_REQ_ADC3 17U /*!< DMAMUX2 ADC3 request */ +#endif /* ADC3 */ +#if defined (DAC2) +#define LL_DMAMUX2_REQ_DAC2_CH1 17U /*!< DMAMUX2 DAC2 CH1 request */ +#endif /* DAC2 */ +#if defined (DFSDM2_Channel0) +#define LL_DMAMUX2_REQ_DFSDM2_FLT0 18U /*!< DMAMUX2 DFSDM2 Filter0 request */ +#endif /* DFSDM2_Channel0 */ +/** + * @} + */ + + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX1 Channel 0 connected to DMA1 Channel 0 , DMAMUX2 Channel 0 connected to BDMA Channel 0 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX1 Channel 1 connected to DMA1 Channel 1 , DMAMUX2 Channel 1 connected to BDMA Channel 1 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX1 Channel 2 connected to DMA1 Channel 2 , DMAMUX2 Channel 2 connected to BDMA Channel 2 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX1 Channel 3 connected to DMA1 Channel 3 , DMAMUX2 Channel 3 connected to BDMA Channel 3 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX1 Channel 4 connected to DMA1 Channel 4 , DMAMUX2 Channel 4 connected to BDMA Channel 4 */ +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX1 Channel 5 connected to DMA1 Channel 5 , DMAMUX2 Channel 5 connected to BDMA Channel 5 */ +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX1 Channel 6 connected to DMA1 Channel 6 , DMAMUX2 Channel 6 connected to BDMA Channel 6 */ +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX1 Channel 7 connected to DMA1 Channel 7 , DMAMUX2 Channel 7 connected to BDMA Channel 7 */ +#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX1 Channel 8 connected to DMA2 Channel 0 */ +#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX1 Channel 9 connected to DMA2 Channel 1 */ +#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX1 Channel 10 connected to DMA2 Channel 2 */ +#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX1 Channel 11 connected to DMA2 Channel 3 */ +#define LL_DMAMUX_CHANNEL_12 0x0000000CU /*!< DMAMUX1 Channel 12 connected to DMA2 Channel 4 */ +#define LL_DMAMUX_CHANNEL_13 0x0000000DU /*!< DMAMUX1 Channel 13 connected to DMA2 Channel 5 */ +#define LL_DMAMUX_CHANNEL_14 0x0000000EU /*!< DMAMUX1 Channel 14 connected to DMA2 Channel 6 */ +#define LL_DMAMUX_CHANNEL_15 0x0000000FU /*!< DMAMUX1 Channel 15 connected to DMA2 Channel 7 */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_NO Synchronization Signal Polarity + * @{ + */ +#define LL_DMAMUX_SYNC_NO_EVENT 0x00000000U /*!< All requests are blocked */ +#define LL_DMAMUX_SYNC_POL_RISING DMAMUX_CxCR_SPOL_0 /*!< Synchronization on event on rising edge */ +#define LL_DMAMUX_SYNC_POL_FALLING DMAMUX_CxCR_SPOL_1 /*!< Synchronization on event on falling edge */ +#define LL_DMAMUX_SYNC_POL_RISING_FALLING (DMAMUX_CxCR_SPOL_0 | DMAMUX_CxCR_SPOL_1) /*!< Synchronization on event on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_SYNC_EVT Synchronization Signal Event + * @{ + */ +#define LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT 0x00000000U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */ +#define LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT 0x01000000U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */ +#define LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT 0x02000000U /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */ +#define LL_DMAMUX1_SYNC_LPTIM1_OUT 0x03000000U /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT */ +#define LL_DMAMUX1_SYNC_LPTIM2_OUT 0x04000000U /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT */ +#define LL_DMAMUX1_SYNC_LPTIM3_OUT 0x05000000U /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT */ +#define LL_DMAMUX1_SYNC_EXTI0 0x06000000U /*!< DMAMUX1 synchronization Signal is EXTI0 IT */ +#define LL_DMAMUX1_SYNC_TIM12_TRGO 0x07000000U /*!< DMAMUX1 synchronization Signal is TIM12 TRGO */ + +#define LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT 0x00000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel0 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT 0x01000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel1 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT 0x02000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel2 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT 0x03000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel3 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT 0x04000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel4 Event */ +#define LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT 0x05000000U /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel5 Event */ +#define LL_DMAMUX2_SYNC_LPUART1_RX_WKUP 0x06000000U /*!< DMAMUX2 synchronization Signal is LPUART1 RX Wakeup */ +#define LL_DMAMUX2_SYNC_LPUART1_TX_WKUP 0x07000000U /*!< DMAMUX2 synchronization Signal is LPUART1 TX Wakeup */ +#define LL_DMAMUX2_SYNC_LPTIM2_OUT 0x08000000U /*!< DMAMUX2 synchronization Signal is LPTIM2 output */ +#define LL_DMAMUX2_SYNC_LPTIM3_OUT 0x09000000U /*!< DMAMUX2 synchronization Signal is LPTIM3 output */ +#define LL_DMAMUX2_SYNC_I2C4_WKUP 0x0A000000U /*!< DMAMUX2 synchronization Signal is I2C4 Wakeup */ +#define LL_DMAMUX2_SYNC_SPI6_WKUP 0x0B000000U /*!< DMAMUX2 synchronization Signal is SPI6 Wakeup */ +#define LL_DMAMUX2_SYNC_COMP1_OUT 0x0C000000U /*!< DMAMUX2 synchronization Signal is Comparator 1 output */ +#define LL_DMAMUX2_SYNC_RTC_WKUP 0x0D000000U /*!< DMAMUX2 synchronization Signal is RTC Wakeup */ +#define LL_DMAMUX2_SYNC_EXTI0 0x0E000000U /*!< DMAMUX2 synchronization Signal is EXTI0 IT */ +#define LL_DMAMUX2_SYNC_EXTI2 0x0F000000U /*!< DMAMUX2 synchronization Signal is EXTI2 IT */ + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GENERATOR Request Generator Channel + * @{ + */ +#define LL_DMAMUX_REQ_GEN_0 0x00000000U +#define LL_DMAMUX_REQ_GEN_1 0x00000001U +#define LL_DMAMUX_REQ_GEN_2 0x00000002U +#define LL_DMAMUX_REQ_GEN_3 0x00000003U +#define LL_DMAMUX_REQ_GEN_4 0x00000004U +#define LL_DMAMUX_REQ_GEN_5 0x00000005U +#define LL_DMAMUX_REQ_GEN_6 0x00000006U +#define LL_DMAMUX_REQ_GEN_7 0x00000007U +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN_POLARITY External Request Signal Generation Polarity + * @{ + */ +#define LL_DMAMUX_REQ_GEN_NO_EVENT 0x00000000U /*!< No external DMA request generation */ +#define LL_DMAMUX_REQ_GEN_POL_RISING DMAMUX_RGxCR_GPOL_0 /*!< External DMA request generation on event on rising edge */ +#define LL_DMAMUX_REQ_GEN_POL_FALLING DMAMUX_RGxCR_GPOL_1 /*!< External DMA request generation on event on falling edge */ +#define LL_DMAMUX_REQ_GEN_POL_RISING_FALLING (DMAMUX_RGxCR_GPOL_0 | DMAMUX_RGxCR_GPOL_1) /*!< External DMA request generation on rising and falling edge */ +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST_GEN External Request Signal Generation + * @{ + */ +#define LL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT 0U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */ +#define LL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT 1U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */ +#define LL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT 2U /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */ +#define LL_DMAMUX1_REQ_GEN_LPTIM1_OUT 3U /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT */ +#define LL_DMAMUX1_REQ_GEN_LPTIM2_OUT 4U /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT */ +#define LL_DMAMUX1_REQ_GEN_LPTIM3_OUT 5U /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT */ +#define LL_DMAMUX1_REQ_GEN_EXTI0 6U /*!< DMAMUX1 Request generator Signal is EXTI0 IT */ +#define LL_DMAMUX1_REQ_GEN_TIM12_TRGO 7U /*!< DMAMUX1 Request generator Signal is TIM12 TRGO */ + +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT 0U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel0 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT 1U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel1 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT 2U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel2 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT 3U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel3 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT 4U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel4 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT 5U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel5 Event */ +#define LL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT 6U /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel6 Event */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP 7U /*!< DMAMUX2 Request generator Signal is LPUART1 RX Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP 8U /*!< DMAMUX2 Request generator Signal is LPUART1 TX Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPTIM2_WKUP 9U /*!< DMAMUX2 Request generator Signal is LPTIM2 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPTIM2_OUT 10U /*!< DMAMUX2 Request generator Signal is LPTIM2 OUT */ +#define LL_DMAMUX2_REQ_GEN_LPTIM3_WKUP 11U /*!< DMAMUX2 Request generator Signal is LPTIM3 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_LPTIM3_OUT 12U /*!< DMAMUX2 Request generator Signal is LPTIM3 OUT */ +#if defined (LPTIM4) +#define LL_DMAMUX2_REQ_GEN_LPTIM4_WKUP 13U /*!< DMAMUX2 Request generator Signal is LPTIM4 Wakeup */ +#endif /* LPTIM4 */ +#if defined (LPTIM5) +#define LL_DMAMUX2_REQ_GEN_LPTIM5_WKUP 14U /*!< DMAMUX2 Request generator Signal is LPTIM5 Wakeup */ +#endif /* LPTIM5 */ +#define LL_DMAMUX2_REQ_GEN_I2C4_WKUP 15U /*!< DMAMUX2 Request generator Signal is I2C4 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_SPI6_WKUP 16U /*!< DMAMUX2 Request generator Signal is SPI6 Wakeup */ +#define LL_DMAMUX2_REQ_GEN_COMP1_OUT 17U /*!< DMAMUX2 Request generator Signal is Comparator 1 output */ +#define LL_DMAMUX2_REQ_GEN_COMP2_OUT 18U /*!< DMAMUX2 Request generator Signal is Comparator 2 output */ +#define LL_DMAMUX2_REQ_GEN_RTC_WKUP 19U /*!< DMAMUX2 Request generator Signal is RTC Wakeup */ +#define LL_DMAMUX2_REQ_GEN_EXTI0 20U /*!< DMAMUX2 Request generator Signal is EXTI0 */ +#define LL_DMAMUX2_REQ_GEN_EXTI2 21U /*!< DMAMUX2 Request generator Signal is EXTI2 */ +#define LL_DMAMUX2_REQ_GEN_I2C4_IT_EVT 22U /*!< DMAMUX2 Request generator Signal is I2C4 IT Event */ +#define LL_DMAMUX2_REQ_GEN_SPI6_IT 23U /*!< DMAMUX2 Request generator Signal is SPI6 IT */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_TX_IT 24U /*!< DMAMUX2 Request generator Signal is LPUART1 Tx IT */ +#define LL_DMAMUX2_REQ_GEN_LPUART1_RX_IT 25U /*!< DMAMUX2 Request generator Signal is LPUART1 Rx IT */ +#if defined (ADC3) +#define LL_DMAMUX2_REQ_GEN_ADC3_IT 26U /*!< DMAMUX2 Request generator Signal is ADC3 IT */ +#define LL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT 27U /*!< DMAMUX2 Request generator Signal is ADC3 Analog Watchdog 1 output */ +#endif /* ADC3 */ +#define LL_DMAMUX2_REQ_GEN_BDMA_CH0_IT 28U /*!< DMAMUX2 Request generator Signal is BDMA Channel 0 IT */ +#define LL_DMAMUX2_REQ_GEN_BDMA_CH1_IT 29U /*!< DMAMUX2 Request generator Signal is BDMA Channel 1 IT */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX1 channel 0 to 7 are mapped to DMA1 channel 0 to 7. + * DMAMUX1 channel 8 to 15 are mapped to DMA2 channel 0 to 7. + * DMAMUX2 channel 0 to 7 are mapped to BDMA channel 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * @arg @ref LL_DMAMUX2_REQ_MEM2MEM + * @arg @ref LL_DMAMUX2_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX2_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX2_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX2_REQ_SPI6_RX + * @arg @ref LL_DMAMUX2_REQ_SPI6_TX + * @arg @ref LL_DMAMUX2_REQ_I2C4_RX + * @arg @ref LL_DMAMUX2_REQ_I2C4_TX + * @arg @ref LL_DMAMUX2_REQ_SAI4_A (*) + * @arg @ref LL_DMAMUX2_REQ_SAI4_B (*) + * @arg @ref LL_DMAMUX2_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX2_REQ_DAC2_CH1 (*) + * @arg @ref LL_DMAMUX2_REQ_DFSDM2_FLT0 (*) + * + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX1 channel 0 to 7 are mapped to DMA1 channel 0 to 7. + * DMAMUX1 channel 8 to 15 are mapped to DMA2 channel 0 to 7. + * DMAMUX2 channel 0 to 7 are mapped to BDMA channel 0 to 7. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_MEM2MEM + * @arg @ref LL_DMAMUX1_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX1_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX1_REQ_ADC1 + * @arg @ref LL_DMAMUX1_REQ_ADC2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM1_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM1_UP + * @arg @ref LL_DMAMUX1_REQ_TIM1_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM1_COM + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM2_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM2_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM3_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM3_UP + * @arg @ref LL_DMAMUX1_REQ_TIM3_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM4_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM4_UP + * @arg @ref LL_DMAMUX1_REQ_I2C1_RX + * @arg @ref LL_DMAMUX1_REQ_I2C1_TX + * @arg @ref LL_DMAMUX1_REQ_I2C2_RX + * @arg @ref LL_DMAMUX1_REQ_I2C2_TX + * @arg @ref LL_DMAMUX1_REQ_SPI1_RX + * @arg @ref LL_DMAMUX1_REQ_SPI1_TX + * @arg @ref LL_DMAMUX1_REQ_SPI2_RX + * @arg @ref LL_DMAMUX1_REQ_SPI2_TX + * @arg @ref LL_DMAMUX1_REQ_USART1_RX + * @arg @ref LL_DMAMUX1_REQ_USART1_TX + * @arg @ref LL_DMAMUX1_REQ_USART2_RX + * @arg @ref LL_DMAMUX1_REQ_USART2_TX + * @arg @ref LL_DMAMUX1_REQ_USART3_RX + * @arg @ref LL_DMAMUX1_REQ_USART3_TX + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM8_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM8_UP + * @arg @ref LL_DMAMUX1_REQ_TIM8_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM8_COM + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH3 + * @arg @ref LL_DMAMUX1_REQ_TIM5_CH4 + * @arg @ref LL_DMAMUX1_REQ_TIM5_UP + * @arg @ref LL_DMAMUX1_REQ_TIM5_TRIG + * @arg @ref LL_DMAMUX1_REQ_SPI3_RX + * @arg @ref LL_DMAMUX1_REQ_SPI3_TX + * @arg @ref LL_DMAMUX1_REQ_UART4_RX + * @arg @ref LL_DMAMUX1_REQ_UART4_TX + * @arg @ref LL_DMAMUX1_REQ_UART5_RX + * @arg @ref LL_DMAMUX1_REQ_UART5_TX + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH1 + * @arg @ref LL_DMAMUX1_REQ_DAC1_CH2 + * @arg @ref LL_DMAMUX1_REQ_TIM6_UP + * @arg @ref LL_DMAMUX1_REQ_TIM7_UP + * @arg @ref LL_DMAMUX1_REQ_USART6_RX + * @arg @ref LL_DMAMUX1_REQ_USART6_TX + * @arg @ref LL_DMAMUX1_REQ_I2C3_RX + * @arg @ref LL_DMAMUX1_REQ_I2C3_TX + * @arg @ref LL_DMAMUX1_REQ_DCMI_PSSI (*) + * @arg @ref LL_DMAMUX1_REQ_CRYP_IN + * @arg @ref LL_DMAMUX1_REQ_CRYP_OUT + * @arg @ref LL_DMAMUX1_REQ_HASH_IN + * @arg @ref LL_DMAMUX1_REQ_UART7_RX + * @arg @ref LL_DMAMUX1_REQ_UART7_TX + * @arg @ref LL_DMAMUX1_REQ_UART8_RX + * @arg @ref LL_DMAMUX1_REQ_UART8_TX + * @arg @ref LL_DMAMUX1_REQ_SPI4_RX + * @arg @ref LL_DMAMUX1_REQ_SPI4_TX + * @arg @ref LL_DMAMUX1_REQ_SPI5_RX + * @arg @ref LL_DMAMUX1_REQ_SPI5_TX + * @arg @ref LL_DMAMUX1_REQ_SAI1_A + * @arg @ref LL_DMAMUX1_REQ_SAI1_B + * @arg @ref LL_DMAMUX1_REQ_SAI2_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI2_B (*) + * @arg @ref LL_DMAMUX1_REQ_SWPMI_RX + * @arg @ref LL_DMAMUX1_REQ_SWPMI_TX + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_DT + * @arg @ref LL_DMAMUX1_REQ_SPDIF_RX_CS + * @arg @ref LL_DMAMUX1_REQ_HRTIM_MASTER (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_A (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_B (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_C (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_D (*) + * @arg @ref LL_DMAMUX1_REQ_HRTIM_TIMER_E (*) + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT0 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT1 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT2 + * @arg @ref LL_DMAMUX1_REQ_DFSDM1_FLT3 + * @arg @ref LL_DMAMUX1_REQ_TIM15_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM15_UP + * @arg @ref LL_DMAMUX1_REQ_TIM15_TRIG + * @arg @ref LL_DMAMUX1_REQ_TIM15_COM + * @arg @ref LL_DMAMUX1_REQ_TIM16_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM16_UP + * @arg @ref LL_DMAMUX1_REQ_TIM17_CH1 + * @arg @ref LL_DMAMUX1_REQ_TIM17_UP + * @arg @ref LL_DMAMUX1_REQ_SAI3_A (*) + * @arg @ref LL_DMAMUX1_REQ_SAI3_B (*) + * @arg @ref LL_DMAMUX1_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_RX (*) + * @arg @ref LL_DMAMUX1_REQ_UART9_TX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_RX (*) + * @arg @ref LL_DMAMUX1_REQ_USART10_TX (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_FMAC_WRITE (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_READ (*) + * @arg @ref LL_DMAMUX1_REQ_CORDIC_WRITE(*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_RX (*) + * @arg @ref LL_DMAMUX1_REQ_I2C5_TX (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM23_TRIG (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH1 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH2 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH3 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_CH4 (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_UP (*) + * @arg @ref LL_DMAMUX1_REQ_TIM24_TRIG (*) + * @arg @ref LL_DMAMUX2_REQ_MEM2MEM + * @arg @ref LL_DMAMUX2_REQ_GENERATOR0 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR1 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR2 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR3 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR4 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR5 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR6 + * @arg @ref LL_DMAMUX2_REQ_GENERATOR7 + * @arg @ref LL_DMAMUX2_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX2_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX2_REQ_SPI6_RX + * @arg @ref LL_DMAMUX2_REQ_SPI6_TX + * @arg @ref LL_DMAMUX2_REQ_I2C4_RX + * @arg @ref LL_DMAMUX2_REQ_I2C4_TX + * @arg @ref LL_DMAMUX2_REQ_SAI4_A (*) + * @arg @ref LL_DMAMUX2_REQ_SAI4_B (*) + * @arg @ref LL_DMAMUX2_REQ_ADC3 (*) + * @arg @ref LL_DMAMUX2_REQ_DAC2_CH1 (*) + * @arg @ref LL_DMAMUX2_REQ_DFSDM2_FLT0 (*) + * + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_SetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t RequestNb) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_NBREQ, (RequestNb - 1U) << DMAMUX_CxCR_NBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a synchronization event and/or the number of DMA request needed to generate an event. + * @rmtoll CxCR NBREQ LL_DMAMUX_GetSyncRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)((READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_NBREQ) >> DMAMUX_CxCR_NBREQ_Pos) + 1U); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_SetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Polarity) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is synchronized. + * @rmtoll CxCR SPOL LL_DMAMUX_GetSyncPolarity + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_SYNC_NO_EVENT + * @arg @ref LL_DMAMUX_SYNC_POL_RISING + * @arg @ref LL_DMAMUX_SYNC_POL_FALLING + * @arg @ref LL_DMAMUX_SYNC_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SPOL)); +} + +/** + * @brief Enable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_EnableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Disable the Event Generation on DMAMUX channel x. + * @rmtoll CxCR EGE LL_DMAMUX_DisableEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_EGE); +} + +/** + * @brief Check if the Event Generation on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR EGE LL_DMAMUX_IsEnabledEventGeneration + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledEventGeneration(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_EGE) == (DMAMUX_CxCR_EGE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_EnableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Disable the synchronization mode. + * @rmtoll CxCR SE LL_DMAMUX_DisableSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SE); +} + +/** + * @brief Check if the synchronization mode is enabled or disabled. + * @rmtoll CxCR SE LL_DMAMUX_IsEnabledSync + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledSync(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SE) == (DMAMUX_CxCR_SE)) ? 1UL : 0UL); +} + +/** + * @brief Set DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_SetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @param SyncID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_SYNC_EXTI0 + * @arg @ref LL_DMAMUX1_SYNC_TIM12_TRGO + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_SYNC_I2C4_WKUP + * @arg @ref LL_DMAMUX2_SYNC_SPI6_WKUP + * @arg @ref LL_DMAMUX2_SYNC_COMP1_OUT + * @arg @ref LL_DMAMUX2_SYNC_RTC_WKUP + * @arg @ref LL_DMAMUX2_SYNC_EXTI0 + * @arg @ref LL_DMAMUX2_SYNC_EXTI2 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t SyncID) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SYNC_ID, SyncID); +} + +/** + * @brief Get DMAMUX synchronization ID on DMAMUX Channel x. + * @rmtoll CxCR SYNC_ID LL_DMAMUX_GetSyncID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_SYNC_EXTI0 + * @arg @ref LL_DMAMUX1_SYNC_TIM12_TRGO + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_SYNC_I2C4_WKUP + * @arg @ref LL_DMAMUX2_SYNC_SPI6_WKUP + * @arg @ref LL_DMAMUX2_SYNC_COMP1_OUT + * @arg @ref LL_DMAMUX2_SYNC_RTC_WKUP + * @arg @ref LL_DMAMUX2_SYNC_EXTI0 + * @arg @ref LL_DMAMUX2_SYNC_EXTI2 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetSyncID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SYNC_ID)); +} + +/** + * @brief Enable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_EnableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * (RequestGenChannel))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Disable the Request Generator. + * @rmtoll RGxCR GE LL_DMAMUX_DisableRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * (RequestGenChannel))))->RGCR, DMAMUX_RGxCR_GE); +} + +/** + * @brief Check if the Request Generator is enabled or disabled. + * @rmtoll RGxCR GE LL_DMAMUX_IsEnabledRequestGen + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledRequestGen(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GE) == (DMAMUX_RGxCR_GE)) ? 1UL : 0UL); +} + +/** + * @brief Set the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_SetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t Polarity) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GPOL, Polarity); +} + +/** + * @brief Get the polarity of the signal on which the DMA request is generated. + * @rmtoll RGxCR GPOL LL_DMAMUX_GetRequestGenPolarity + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_NO_EVENT + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_FALLING + * @arg @ref LL_DMAMUX_REQ_GEN_POL_RISING_FALLING + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestGenPolarity(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GPOL)); +} + +/** + * @brief Set the number of DMA request that will be autorized after a generation event. + * @note This field can only be written when Generator is disabled. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_SetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @param RequestNb This parameter must be a value between Min_Data = 1 and Max_Data = 32. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestNb) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GNBREQ, (RequestNb - 1U) << DMAMUX_RGxCR_GNBREQ_Pos); +} + +/** + * @brief Get the number of DMA request that will be autorized after a generation event. + * @rmtoll RGxCR GNBREQ LL_DMAMUX_GetGenRequestNb + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval Between Min_Data = 1 and Max_Data = 32 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetGenRequestNb(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)((READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_GNBREQ) >> DMAMUX_RGxCR_GNBREQ_Pos) + 1U); +} + +/** + * @brief Set DMAMUX external Request Signal ID on DMAMUX Request Generation Trigger Event Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_SetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @param RequestSignalID This parameter can be one of the following values: + * @arg @ref LL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_REQ_GEN_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_REQ_GEN_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_REQ_GEN_EXTI0 + * @arg @ref LL_DMAMUX1_REQ_GEN_TIM12_TRGO + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM2_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM3_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM4_WKUP (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_LPTIM5_WKUP (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_I2C4_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_SPI6_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_COMP1_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_COMP2_OUT + * @arg @ref LL_DMAMUX2_REQ_GEN_RTC_WKUP + * @arg @ref LL_DMAMUX2_REQ_GEN_EXTI0 + * @arg @ref LL_DMAMUX2_REQ_GEN_EXTI2 + * @arg @ref LL_DMAMUX2_REQ_GEN_I2C4_IT_EVT + * @arg @ref LL_DMAMUX2_REQ_GEN_SPI6_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_TX_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_LPUART1_RX_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_ADC3_IT (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT (*) + * @arg @ref LL_DMAMUX2_REQ_GEN_BDMA_CH0_IT + * @arg @ref LL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + * @note (*) Availability depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel, uint32_t RequestSignalID) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + MODIFY_REG(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_SIG_ID, RequestSignalID); +} + +/** + * @brief Get DMAMUX external Request Signal ID set on DMAMUX Channel x. + * @rmtoll RGxCR SIG_ID LL_DMAMUX_GetRequestSignalID + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT + * @arg @ref LL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM1_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX1_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX1_SYNC_EXTI0 + * @arg @ref LL_DMAMUX1_SYNC_TIM12_TRGO + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT + * @arg @ref LL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_RX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPUART1_TX_WKUP + * @arg @ref LL_DMAMUX2_SYNC_LPTIM2_OUT + * @arg @ref LL_DMAMUX2_SYNC_LPTIM3_OUT + * @arg @ref LL_DMAMUX2_SYNC_I2C4_WKUP + * @arg @ref LL_DMAMUX2_SYNC_SPI6_WKUP + * @arg @ref LL_DMAMUX2_SYNC_COMP1_OUT + * @arg @ref LL_DMAMUX2_SYNC_RTC_WKUP + * @arg @ref LL_DMAMUX2_SYNC_EXTI0 + * @arg @ref LL_DMAMUX2_SYNC_EXTI2 + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestSignalID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (uint32_t)(READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_SIG_ID)); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Synchronization Event Overrun Flag Channel 0. + * @rmtoll CSR SOF0 LL_DMAMUX_IsActiveFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF0) == (DMAMUX_CSR_SOF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 1. + * @rmtoll CSR SOF1 LL_DMAMUX_IsActiveFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF1) == (DMAMUX_CSR_SOF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 2. + * @rmtoll CSR SOF2 LL_DMAMUX_IsActiveFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF2) == (DMAMUX_CSR_SOF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 3. + * @rmtoll CSR SOF3 LL_DMAMUX_IsActiveFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF3) == (DMAMUX_CSR_SOF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 4. + * @rmtoll CSR SOF4 LL_DMAMUX_IsActiveFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF4) == (DMAMUX_CSR_SOF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 5. + * @rmtoll CSR SOF5 LL_DMAMUX_IsActiveFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 6. + * @rmtoll CSR SOF6 LL_DMAMUX_IsActiveFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 7. + * @rmtoll CSR SOF7 LL_DMAMUX_IsActiveFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 8. + * @rmtoll CSR SOF8 LL_DMAMUX_IsActiveFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 9. + * @rmtoll CSR SOF9 LL_DMAMUX_IsActiveFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 10. + * @rmtoll CSR SOF10 LL_DMAMUX_IsActiveFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 11. + * @rmtoll CSR SOF11 LL_DMAMUX_IsActiveFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 12. + * @rmtoll CSR SOF12 LL_DMAMUX_IsActiveFlag_SO12 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO12(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF12) == (DMAMUX_CSR_SOF12)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 13. + * @rmtoll CSR SOF13 LL_DMAMUX_IsActiveFlag_SO13 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO13(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF13) == (DMAMUX_CSR_SOF13)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 14. + * @rmtoll CSR SOF14 LL_DMAMUX_IsActiveFlag_SO14 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO14(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF14) == (DMAMUX_CSR_SOF14)) ? 1UL : 0UL); +} + +/** + * @brief Get Synchronization Event Overrun Flag Channel 15. + * @rmtoll CSR SOF15 LL_DMAMUX_IsActiveFlag_SO15 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_SO15(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CSR, DMAMUX_CSR_SOF15) == (DMAMUX_CSR_SOF15)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF0) == (DMAMUX_RGSR_OF0)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGSR OF1 LL_DMAMUX_IsActiveFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF1) == (DMAMUX_RGSR_OF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGSR OF2 LL_DMAMUX_IsActiveFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF2) == (DMAMUX_RGSR_OF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGSR OF3 LL_DMAMUX_IsActiveFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF3) == (DMAMUX_RGSR_OF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 4 Trigger Event Overrun Flag. + * @rmtoll RGSR OF4 LL_DMAMUX_IsActiveFlag_RGO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF4) == (DMAMUX_RGSR_OF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 5 Trigger Event Overrun Flag. + * @rmtoll RGSR OF5 LL_DMAMUX_IsActiveFlag_RGO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF5) == (DMAMUX_RGSR_OF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 6 Trigger Event Overrun Flag. + * @rmtoll RGSR OF6 LL_DMAMUX_IsActiveFlag_RGO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF6) == (DMAMUX_RGSR_OF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Request Generator 7 Trigger Event Overrun Flag. + * @rmtoll RGSR OF7 LL_DMAMUX_IsActiveFlag_RGO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsActiveFlag_RGO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGSR, DMAMUX_RGSR_OF7) == (DMAMUX_RGSR_OF7)) ? 1UL : 0UL); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 0. + * @rmtoll CFR CSOF0 LL_DMAMUX_ClearFlag_SO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF0); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 1. + * @rmtoll CFR CSOF1 LL_DMAMUX_ClearFlag_SO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF1); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 2. + * @rmtoll CFR CSOF2 LL_DMAMUX_ClearFlag_SO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF2); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 3. + * @rmtoll CFR CSOF3 LL_DMAMUX_ClearFlag_SO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF3); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 4. + * @rmtoll CFR CSOF4 LL_DMAMUX_ClearFlag_SO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF4); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 5. + * @rmtoll CFR CSOF5 LL_DMAMUX_ClearFlag_SO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF5); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 6. + * @rmtoll CFR CSOF6 LL_DMAMUX_ClearFlag_SO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF6); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 7. + * @rmtoll CFR CSOF7 LL_DMAMUX_ClearFlag_SO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF7); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 8. + * @rmtoll CFR CSOF8 LL_DMAMUX_ClearFlag_SO8 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO8(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF8); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 9. + * @rmtoll CFR CSOF9 LL_DMAMUX_ClearFlag_SO9 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO9(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF9); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 10. + * @rmtoll CFR CSOF10 LL_DMAMUX_ClearFlag_SO10 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO10(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF10); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 11. + * @rmtoll CFR CSOF11 LL_DMAMUX_ClearFlag_SO11 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO11(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF11); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 12. + * @rmtoll CFR CSOF12 LL_DMAMUX_ClearFlag_SO12 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO12(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF12); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 13. + * @rmtoll CFR CSOF13 LL_DMAMUX_ClearFlag_SO13 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO13(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF13); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 14. + * @rmtoll CFR CSOF14 LL_DMAMUX_ClearFlag_SO14 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO14(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF14); +} + +/** + * @brief Clear Synchronization Event Overrun Flag Channel 15. + * @rmtoll CFR CSOF15 LL_DMAMUX_ClearFlag_SO15 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_SO15(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_ChannelStatus_TypeDef *)(dmamux_base_addr + DMAMUX_CH_STATUS_OFFSET))->CFR, DMAMUX_CFR_CSOF15); +} + +/** + * @brief Clear Request Generator 0 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO0(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF0); +} + +/** + * @brief Clear Request Generator 1 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF1 LL_DMAMUX_ClearFlag_RGO1 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO1(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF1); +} + +/** + * @brief Clear Request Generator 2 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF2 LL_DMAMUX_ClearFlag_RGO2 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO2(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF2); +} + +/** + * @brief Clear Request Generator 3 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF3 LL_DMAMUX_ClearFlag_RGO3 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO3(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF3); +} + +/** + * @brief Clear Request Generator 4 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF4 LL_DMAMUX_ClearFlag_RGO4 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO4(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF4); +} + +/** + * @brief Clear Request Generator 5 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF5 LL_DMAMUX_ClearFlag_RGO5 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO5(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF5); +} + +/** + * @brief Clear Request Generator 6 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF6 LL_DMAMUX_ClearFlag_RGO6 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO6(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF6); +} + +/** + * @brief Clear Request Generator 7 Trigger Event Overrun Flag. + * @rmtoll RGCFR COF7 LL_DMAMUX_ClearFlag_RGO7 + * @param DMAMUXx DMAMUXx DMAMUXx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_ClearFlag_RGO7(DMAMUX_Channel_TypeDef *DMAMUXx) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGenStatus_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_STATUS_OFFSET))->RGCFR, DMAMUX_RGCFR_COF7); +} + +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_EnableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_Channel_TypeDef *)((uint32_t)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel)))))->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Disable the Synchronization Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll CxCR SOIE LL_DMAMUX_DisableIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_Channel_TypeDef *)((uint32_t)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel)))))->CCR, DMAMUX_CxCR_SOIE); +} + +/** + * @brief Check if the Synchronization Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll CxCR SOIE LL_DMAMUX_IsEnabledIT_SO + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @arg @ref LL_DMAMUX_CHANNEL_8 + * @arg @ref LL_DMAMUX_CHANNEL_9 + * @arg @ref LL_DMAMUX_CHANNEL_10 + * @arg @ref LL_DMAMUX_CHANNEL_11 + * @arg @ref LL_DMAMUX_CHANNEL_12 + * @arg @ref LL_DMAMUX_CHANNEL_13 + * @arg @ref LL_DMAMUX_CHANNEL_14 + * @arg @ref LL_DMAMUX_CHANNEL_15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_SO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return (READ_BIT(((DMAMUX_Channel_TypeDef *)(dmamux_base_addr + (DMAMUX_CCR_SIZE * (Channel))))->CCR, DMAMUX_CxCR_SOIE)); +} + +/** + * @brief Enable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_EnableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_EnableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + SET_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Disable the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x. + * @rmtoll RGxCR OIE LL_DMAMUX_DisableIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_DisableIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + CLEAR_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_OIE); +} + +/** + * @brief Check if the Request Generation Trigger Event Overrun Interrupt on DMAMUX channel x is enabled or disabled. + * @rmtoll RGxCR OIE LL_DMAMUX_IsEnabledIT_RGO + * @param DMAMUXx DMAMUXx Instance + * @param RequestGenChannel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_GEN_0 + * @arg @ref LL_DMAMUX_REQ_GEN_1 + * @arg @ref LL_DMAMUX_REQ_GEN_2 + * @arg @ref LL_DMAMUX_REQ_GEN_3 + * @arg @ref LL_DMAMUX_REQ_GEN_4 + * @arg @ref LL_DMAMUX_REQ_GEN_5 + * @arg @ref LL_DMAMUX_REQ_GEN_6 + * @arg @ref LL_DMAMUX_REQ_GEN_7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t RequestGenChannel) +{ + uint32_t dmamux_base_addr = (uint32_t)DMAMUXx; + + return ((READ_BIT(((DMAMUX_RequestGen_TypeDef *)(dmamux_base_addr + DMAMUX_REQ_GEN_OFFSET + (DMAMUX_RGCR_SIZE * RequestGenChannel)))->RGCR, DMAMUX_RGxCR_OIE) == (DMAMUX_RGxCR_OIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 || DMAMUX2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_DMAMUX_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h new file mode 100644 index 0000000..885f22d --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_exti.h @@ -0,0 +1,3285 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_exti.h + * @author MCD Application Team + * @brief Header file of EXTI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_LL_EXTI_H +#define __STM32H7xx_LL_EXTI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (EXTI) + +/** @defgroup EXTI_LL EXTI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private Macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_Private_Macros EXTI Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + uint32_t Line_64_95; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 64 to 95 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_MODE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ +} LL_EXTI_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_0 EXTI_IMR1_IM0 /*!< Extended line 0 */ +#define LL_EXTI_LINE_1 EXTI_IMR1_IM1 /*!< Extended line 1 */ +#define LL_EXTI_LINE_2 EXTI_IMR1_IM2 /*!< Extended line 2 */ +#define LL_EXTI_LINE_3 EXTI_IMR1_IM3 /*!< Extended line 3 */ +#define LL_EXTI_LINE_4 EXTI_IMR1_IM4 /*!< Extended line 4 */ +#define LL_EXTI_LINE_5 EXTI_IMR1_IM5 /*!< Extended line 5 */ +#define LL_EXTI_LINE_6 EXTI_IMR1_IM6 /*!< Extended line 6 */ +#define LL_EXTI_LINE_7 EXTI_IMR1_IM7 /*!< Extended line 7 */ +#define LL_EXTI_LINE_8 EXTI_IMR1_IM8 /*!< Extended line 8 */ +#define LL_EXTI_LINE_9 EXTI_IMR1_IM9 /*!< Extended line 9 */ +#define LL_EXTI_LINE_10 EXTI_IMR1_IM10 /*!< Extended line 10 */ +#define LL_EXTI_LINE_11 EXTI_IMR1_IM11 /*!< Extended line 11 */ +#define LL_EXTI_LINE_12 EXTI_IMR1_IM12 /*!< Extended line 12 */ +#define LL_EXTI_LINE_13 EXTI_IMR1_IM13 /*!< Extended line 13 */ +#define LL_EXTI_LINE_14 EXTI_IMR1_IM14 /*!< Extended line 14 */ +#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */ +#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */ +#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */ +#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */ +#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */ +#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */ +#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */ +#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */ +#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */ +#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */ +#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */ +#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */ +#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */ +#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */ +#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */ +#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */ +#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */ +#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */ +#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */ +#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */ +#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */ +#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */ +#define LL_EXTI_LINE_37 EXTI_IMR2_IM37 /*!< Extended line 37 */ +#define LL_EXTI_LINE_38 EXTI_IMR2_IM38 /*!< Extended line 38 */ +#define LL_EXTI_LINE_39 EXTI_IMR2_IM39 /*!< Extended line 39 */ +#define LL_EXTI_LINE_40 EXTI_IMR2_IM40 /*!< Extended line 40 */ +#define LL_EXTI_LINE_41 EXTI_IMR2_IM41 /*!< Extended line 41 */ +#define LL_EXTI_LINE_42 EXTI_IMR2_IM42 /*!< Extended line 42 */ +#define LL_EXTI_LINE_43 EXTI_IMR2_IM43 /*!< Extended line 43 */ +#if defined(USB2_OTG_FS) +#define LL_EXTI_LINE_44 EXTI_IMR2_IM44 /*!< Extended line 44 */ +#endif /* USB2_OTG_FS */ +#if defined(DSI) +#define LL_EXTI_LINE_46 EXTI_IMR2_IM46 /*!< Extended line 46 */ +#endif /* DSI */ +#define LL_EXTI_LINE_47 EXTI_IMR2_IM47 /*!< Extended line 47 */ +#define LL_EXTI_LINE_48 EXTI_IMR2_IM48 /*!< Extended line 48 */ +#define LL_EXTI_LINE_49 EXTI_IMR2_IM49 /*!< Extended line 49 */ +#define LL_EXTI_LINE_50 EXTI_IMR2_IM50 /*!< Extended line 50 */ +#define LL_EXTI_LINE_51 EXTI_IMR2_IM51 /*!< Extended line 51 */ +#define LL_EXTI_LINE_52 EXTI_IMR2_IM52 /*!< Extended line 52 */ +#define LL_EXTI_LINE_53 EXTI_IMR2_IM53 /*!< Extended line 53 */ +#define LL_EXTI_LINE_54 EXTI_IMR2_IM54 /*!< Extended line 54 */ +#define LL_EXTI_LINE_55 EXTI_IMR2_IM55 /*!< Extended line 55 */ +#define LL_EXTI_LINE_56 EXTI_IMR2_IM56 /*!< Extended line 56 */ +#if defined(EXTI_IMR2_IM57) +#define LL_EXTI_LINE_57 EXTI_IMR2_IM57 /*!< Extended line 57 */ +#endif /*EXTI_IMR2_IM57*/ +#define LL_EXTI_LINE_58 EXTI_IMR2_IM58 /*!< Extended line 58 */ +#if defined(EXTI_IMR2_IM59) +#define LL_EXTI_LINE_59 EXTI_IMR2_IM59 /*!< Extended line 59 */ +#endif /*EXTI_IMR2_IM59*/ +#define LL_EXTI_LINE_60 EXTI_IMR2_IM60 /*!< Extended line 60 */ +#define LL_EXTI_LINE_61 EXTI_IMR2_IM61 /*!< Extended line 61 */ +#define LL_EXTI_LINE_62 EXTI_IMR2_IM62 /*!< Extended line 62 */ +#define LL_EXTI_LINE_63 EXTI_IMR2_IM63 /*!< Extended line 63 */ +#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/ + +#define LL_EXTI_LINE_64 EXTI_IMR3_IM64 /*!< Extended line 64 */ +#define LL_EXTI_LINE_65 EXTI_IMR3_IM65 /*!< Extended line 65 */ +#define LL_EXTI_LINE_66 EXTI_IMR3_IM66 /*!< Extended line 66 */ +#define LL_EXTI_LINE_67 EXTI_IMR3_IM67 /*!< Extended line 67 */ +#define LL_EXTI_LINE_68 EXTI_IMR3_IM68 /*!< Extended line 68 */ +#define LL_EXTI_LINE_69 EXTI_IMR3_IM69 /*!< Extended line 69 */ +#define LL_EXTI_LINE_70 EXTI_IMR3_IM70 /*!< Extended line 70 */ +#define LL_EXTI_LINE_71 EXTI_IMR3_IM71 /*!< Extended line 71 */ +#define LL_EXTI_LINE_72 EXTI_IMR3_IM72 /*!< Extended line 72 */ +#define LL_EXTI_LINE_73 EXTI_IMR3_IM73 /*!< Extended line 73 */ +#define LL_EXTI_LINE_74 EXTI_IMR3_IM74 /*!< Extended line 74 */ +#if defined(ADC3) +#define LL_EXTI_LINE_75 EXTI_IMR3_IM75 /*!< Extended line 75 */ +#endif /* ADC3 */ +#if defined(SAI4) +#define LL_EXTI_LINE_76 EXTI_IMR3_IM76 /*!< Extended line 76 */ +#endif /* SAI4 */ +#if defined(DUAL_CORE) +#define LL_EXTI_LINE_77 EXTI_IMR3_IM77 /*!< Extended line 77 */ +#define LL_EXTI_LINE_78 EXTI_IMR3_IM78 /*!< Extended line 78 */ +#define LL_EXTI_LINE_79 EXTI_IMR3_IM79 /*!< Extended line 79 */ +#define LL_EXTI_LINE_80 EXTI_IMR3_IM80 /*!< Extended line 80 */ +#define LL_EXTI_LINE_82 EXTI_IMR3_IM82 /*!< Extended line 82 */ +#define LL_EXTI_LINE_84 EXTI_IMR3_IM84 /*!< Extended line 84 */ +#endif /* DUAL_CORE */ +#define LL_EXTI_LINE_85 EXTI_IMR3_IM85 /*!< Extended line 85 */ +#if defined(ETH) +#define LL_EXTI_LINE_86 EXTI_IMR3_IM86 /*!< Extended line 86 */ +#endif /* ETH */ +#define LL_EXTI_LINE_87 EXTI_IMR3_IM87 /*!< Extended line 87 */ +#if defined(DTS) +#define LL_EXTI_LINE_88 EXTI_IMR3_IM88 /*!< Extended line 88 */ +#endif /* DTS */ +#if defined(EXTI_IMR3_IM89) +#define LL_EXTI_LINE_89 EXTI_IMR3_IM89 /*!< Extended line 89 */ +#endif /* EXTI_IMR3_IM89 */ +#if defined(EXTI_IMR3_IM90) +#define LL_EXTI_LINE_90 EXTI_IMR3_IM90 /*!< Extended line 90 */ +#endif /* EXTI_IMR3_IM90 */ +#if defined(I2C5) +#define LL_EXTI_LINE_91 EXTI_IMR3_IM91 /*!< Extended line 91 */ +#endif /* I2C5 */ +#define LL_EXTI_LINE_ALL_64_95 EXTI_IMR3_IM /*!< All Extended line not reserved*/ + + +#define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup EXTI_LL_EC_MODE Mode + * @{ + */ +#define LL_EXTI_MODE_IT ((uint8_t)0x01U) /*!< Cortex-M7 Interrupt Mode */ +#define LL_EXTI_MODE_EVENT ((uint8_t)0x02U) /*!< Cortex-M7 Event Mode */ +#define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x03U) /*!< Cortex-M7 Interrupt & Event Mode */ + +#if defined(DUAL_CORE) +#define LL_EXTI_MODE_C1_IT LL_EXTI_MODE_IT /*!< Cortex-M7 Interrupt Mode */ +#define LL_EXTI_MODE_C1_EVENT LL_EXTI_MODE_EVENT /*!< Cortex-M7 Event Mode */ +#define LL_EXTI_MODE_C1_IT_EVENT LL_EXTI_MODE_IT_EVENT /*!< Cortex-M7 Interrupt & Event Mode */ + +#define LL_EXTI_MODE_C2_IT ((uint8_t)0x10U) /*!< Cortex-M4 Interrupt Mode */ +#define LL_EXTI_MODE_C2_EVENT ((uint8_t)0x20U) /*!< Cortex-M4 Event Mode */ +#define LL_EXTI_MODE_C2_IT_EVENT ((uint8_t)0x30U) /*!< Cortex-M4 Interrupt & Event Mode */ +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< No Trigger Mode */ +#define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01U) /*!< Trigger Rising Mode */ +#define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02U) /*!< Trigger Falling Mode */ +#define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03U) /*!< Trigger Rising & Falling Mode */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_D3_PEND_CLR D3 Pend Clear Source + * @{ + */ +#define LL_EXTI_D3_PEND_CLR_DMACH6 ((uint8_t)0x00U) /*!< DMA ch6 event selected as D3 domain pendclear source */ +#define LL_EXTI_D3_PEND_CLR_DMACH7 ((uint8_t)0x01U) /*!< DMA ch7 event selected as D3 domain pendclear source */ +#if defined (LPTIM4) +#define LL_EXTI_D3_PEND_CLR_LPTIM4 ((uint8_t)0x02U) /*!< LPTIM4 out selected as D3 domain pendclear source */ +#else +#define LL_EXTI_D3_PEND_CLR_LPTIM2 ((uint8_t)0x02U) /*!< LPTIM2 out selected as D3 domain pendclear source */ +#endif /*LPTIM4*/ +#if defined (LPTIM5) +#define LL_EXTI_D3_PEND_CLR_LPTIM5 ((uint8_t)0x03U) /*!< LPTIM5 out selected as D3 domain pendclear source */ +#else +#define LL_EXTI_D3_PEND_CLR_LPTIM3 ((uint8_t)0x02U) /*!< LPTIM3 out selected as D3 domain pendclear source */ +#endif /*LPTIM5*/ +/** + * @} + */ + + +#endif /*USE_FULL_LL_DRIVER*/ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in EXTI register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) + +/** + * @brief Read a value in EXTI register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) + +/** + * @} + */ + + +/** + * @} + */ + + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 + * @rmtoll IMR1 IMx LL_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 + * @rmtoll IMR2 IMx LL_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR2, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95 + * @rmtoll IMR3 IMx LL_EXTI_EnableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->IMR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 + * @rmtoll IMR1 IMx LL_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR1, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 + * @rmtoll IMR2 IMx LL_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95 + * @rmtoll IMR3 IMx LL_EXTI_DisableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->IMR3, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 + * @rmtoll IMR1 IMx LL_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 + * @rmtoll IMR2 IMx LL_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95 + * @rmtoll IMR3 IMx LL_EXTI_IsEnabledIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->IMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2IMR1 IMx LL_C2_EXTI_EnableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableIT_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2IMR1, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2IMR2 IMx LL_C2_EXTI_EnableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableIT_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2IMR2, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Interrupt request for Lines in range 64 to 95 + * @rmtoll C2IMR3 IMx LL_C2_EXTI_EnableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableIT_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2IMR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2IMR1 IMx LL_C2_EXTI_DisableIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableIT_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2IMR1, ExtiLine); +} + + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2IMR2 IMx LL_C2_EXTI_DisableIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableIT_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2IMR2, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Interrupt request for Lines in range 64 to 95 for cpu2 + * @rmtoll C2IMR3 IMx LL_C2_EXTI_DisableIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableIT_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2IMR3, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 for cpu2 + * @rmtoll C2IMR1 IMx LL_C2_EXTI_IsEnabledIT_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2IMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 32 to 63 for cpu2 + * @rmtoll C2IMR2 IMx LL_C2_EXTI_IsEnabledIT_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2IMR2, ExtiLine) == (ExtiLine))? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 64 to 95 + * @rmtoll C2IMR3 IMx LL_C2_EXTI_IsEnabledIT_64_95 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledIT_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2IMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +#endif /* DUAL_CORE */ + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Event_Management Event_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_EnableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableEvent_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->EMR3, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Event request for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_DisableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableEvent_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->EMR3, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 + * @rmtoll EMR1 EMx LL_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 + * @rmtoll EMR2 EMx LL_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 (*) + * @arg @ref LL_EXTI_LINE_46 (*) + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 (*) + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 (*) + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * + * (*) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95 + * @rmtoll EMR3 EMx LL_EXTI_IsEnabledEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 (*) + * @arg @ref LL_EXTI_LINE_76 (*) + * @arg @ref LL_EXTI_LINE_77 (**) + * @arg @ref LL_EXTI_LINE_78 (**) + * @arg @ref LL_EXTI_LINE_79 (**) + * @arg @ref LL_EXTI_LINE_80 (**) + * @arg @ref LL_EXTI_LINE_82 (**) + * @arg @ref LL_EXTI_LINE_84 (**) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (*) + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_88 (*) + * @arg @ref LL_EXTI_LINE_89 (*) + * @arg @ref LL_EXTI_LINE_90 (*) + * @arg @ref LL_EXTI_LINE_91 (*) + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * + * (*) value not defined in all devices. + * (**) value only defined in dual core devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->EMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +#if defined(DUAL_CORE) + +/** + * @brief Enable ExtiLine Event request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2EMR1 EMx LL_C2_EXTI_EnableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableEvent_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2EMR1, ExtiLine); +} + + +/** + * @brief Enable ExtiLine Event request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2EMR2 EMx LL_C2_EXTI_EnableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableEvent_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2EMR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Event request for Lines in range 64 to 95 for cpu2 + * @rmtoll C2EMR3 EMx LL_C2_EXTI_EnableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_EnableEvent_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->C2EMR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 0 to 31 for cpu2 + * @rmtoll C2EMR1 EMx LL_C2_EXTI_DisableEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableEvent_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2EMR1, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 32 to 63 for cpu2 + * @rmtoll C2EMR2 EMx LL_C2_EXTI_DisableEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableEvent_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2EMR2, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Event request for Lines in range 64 to 95 for cpu2 + * @rmtoll C2EMR3 EMx LL_C2_EXTI_DisableEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_DisableEvent_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->C2EMR3, ExtiLine); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 for cpu2 + * @rmtoll C2EMR1 EMx LL_C2_EXTI_IsEnabledEvent_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_22 + * @arg @ref LL_EXTI_LINE_23 + * @arg @ref LL_EXTI_LINE_24 + * @arg @ref LL_EXTI_LINE_25 + * @arg @ref LL_EXTI_LINE_26 + * @arg @ref LL_EXTI_LINE_27 + * @arg @ref LL_EXTI_LINE_28 + * @arg @ref LL_EXTI_LINE_29 + * @arg @ref LL_EXTI_LINE_30 + * @arg @ref LL_EXTI_LINE_31 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2EMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 32 to 63 for cpu2 + * @rmtoll C2EMR2 EMx LL_C2_EXTI_IsEnabledEvent_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_32 + * @arg @ref LL_EXTI_LINE_33 + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_36 + * @arg @ref LL_EXTI_LINE_37 + * @arg @ref LL_EXTI_LINE_38 + * @arg @ref LL_EXTI_LINE_39 + * @arg @ref LL_EXTI_LINE_40 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_42 + * @arg @ref LL_EXTI_LINE_43 + * @arg @ref LL_EXTI_LINE_44 + * @arg @ref LL_EXTI_LINE_46 + * @arg @ref LL_EXTI_LINE_47 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @arg @ref LL_EXTI_LINE_54 + * @arg @ref LL_EXTI_LINE_55 + * @arg @ref LL_EXTI_LINE_56 + * @arg @ref LL_EXTI_LINE_57 + * @arg @ref LL_EXTI_LINE_58 + * @arg @ref LL_EXTI_LINE_59 + * @arg @ref LL_EXTI_LINE_60 + * @arg @ref LL_EXTI_LINE_61 + * @arg @ref LL_EXTI_LINE_62 + * @arg @ref LL_EXTI_LINE_63 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2EMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Indicate if ExtiLine Event request is enabled for Lines in range 64 to 95 for cpu2 + * @rmtoll C2EMR3 EMx LL_C2_EXTI_IsEnabledEvent_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_64 + * @arg @ref LL_EXTI_LINE_65 + * @arg @ref LL_EXTI_LINE_66 + * @arg @ref LL_EXTI_LINE_67 + * @arg @ref LL_EXTI_LINE_68 + * @arg @ref LL_EXTI_LINE_69 + * @arg @ref LL_EXTI_LINE_70 + * @arg @ref LL_EXTI_LINE_71 + * @arg @ref LL_EXTI_LINE_72 + * @arg @ref LL_EXTI_LINE_73 + * @arg @ref LL_EXTI_LINE_74 + * @arg @ref LL_EXTI_LINE_75 + * @arg @ref LL_EXTI_LINE_76 + * @arg @ref LL_EXTI_LINE_77 + * @arg @ref LL_EXTI_LINE_78 + * @arg @ref LL_EXTI_LINE_79 + * @arg @ref LL_EXTI_LINE_80 + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_87 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsEnabledEvent_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2EMR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_EnableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set.Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_EnableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set.Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR3 RTx LL_EXTI_EnableRisingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->RTSR3, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR1 RTx LL_EXTI_DisableRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR1, ExtiLine); + +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR2 RTx LL_EXTI_DisableRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a rising edge on a configurable interrupt + * line occurs during a write operation in the EXTI_RTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll RTSR3 RTx LL_EXTI_DisableRisingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->RTSR3, ExtiLine); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll RTSR1 RTx LL_EXTI_IsEnabledRisingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll RTSR2 RTx LL_EXTI_IsEnabledRisingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range 64 to 95 + * @rmtoll RTSR3 RTx LL_EXTI_IsEnabledRisingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->RTSR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management + * @{ + */ + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR1 FTx LL_EXTI_EnableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR2 FTx LL_EXTI_EnableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for + * the same interrupt line. In this case, both generate a trigger + * condition. + * @rmtoll FTSR3 FTx LL_EXTI_EnableFallingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableFallingTrig_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->FTSR3, ExtiLine); +} + + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR1 FTx LL_EXTI_DisableFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 32 to 63 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR2 FTx LL_EXTI_DisableFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 64 to 95 + * @note The configurable wakeup lines are edge-triggered. No glitch must be + * generated on these lines. If a Falling edge on a configurable interrupt + * line occurs during a write operation in the EXTI_FTSR register, the + * pending bit is not set. + * Rising and falling edge triggers can be set for the same interrupt line. + * In this case, both generate a trigger condition. + * @rmtoll FTSR3 FTx LL_EXTI_DisableFallingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableFallingTrig_64_95(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->FTSR3, ExtiLine); +} + + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 + * @rmtoll FTSR1 FTx LL_EXTI_IsEnabledFallingTrig_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 32 to 63 + * @rmtoll FTSR2 FTx LL_EXTI_IsEnabledFallingTrig_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if falling edge trigger is enabled for Lines in range 64 to 95 + * @rmtoll FTSR3 FTx LL_EXTI_IsEnabledFallingTrig_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->FTSR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management + * @{ + */ + +/** + * @brief Generate a software Interrupt Event for Lines in range 0 to 31 + * @note If the interrupt is enabled on this line in the EXTI_C1IMR1, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR1 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR1 + * register (by writing a 1 into the bit) + * @rmtoll SWIER1 SWIx LL_EXTI_GenerateSWI_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER1, ExtiLine); +} + +/** + * @brief Generate a software Interrupt Event for Lines in range 32 to 63 + * @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR2 + * register (by writing a 1 into the bit) + * @rmtoll SWIER2 SWIx LL_EXTI_GenerateSWI_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER2, ExtiLine); +} + +/** + * @brief Generate a software Interrupt Event for Lines in range 64 to 95 + * @note If the interrupt is enabled on this line in the EXTI_IMR2, writing a 1 to + * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR2 + * resulting in an interrupt request generation. + * This bit is cleared by clearing the corresponding bit in the EXTI_PR3 + * register (by writing a 1 into the bit) + * @rmtoll SWIER3 SWIx LL_EXTI_GenerateSWI_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_GenerateSWI_64_95(uint32_t ExtiLine) +{ + SET_BIT(EXTI->SWIER3, ExtiLine); +} + + +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_IsActiveFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 64 to 95 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR3 PIFx LL_EXTI_IsActiveFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->PR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR1, ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ReadFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_32_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR2, ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 64 to 95 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR3 PIFx LL_EXTI_ReadFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag_64_95(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->PR3, ExtiLine)); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR1 PIFx LL_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR1, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 32 to 63 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR2 PIFx LL_EXTI_ClearFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR2, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 64 to 95 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll PR3 PIFx LL_EXTI_ClearFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 (*) + * @arg @ref LL_EXTI_LINE_84 (*) + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 (**) + * + * (*) value only defined in dual core devices. + * (**) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_EXTI_ClearFlag_64_95(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->PR3, ExtiLine); +} + +#if defined(DUAL_CORE) + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR1 PIFx LL_C2_EXTI_IsActiveFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_ALL_0_31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2PR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 32 to 63 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR2 PIFx LL_C2_EXTI_IsActiveFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_ALL_32_63 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2PR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range 64 to 95 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR3 PIFx LL_C2_EXTI_IsActiveFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @arg @ref LL_EXTI_LINE_ALL_64_95 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_IsActiveFlag_64_95(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->C2PR3, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR1 PIFx LL_C2_EXTI_ReadFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_0_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->C2PR1, ExtiLine)); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range 32 to 63 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR2 PIFx LL_C2_EXTI_ReadFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_32_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->C2PR2, ExtiLine)); +} + + +/** + * @brief Read ExtLine Combination Flag for Lines in range 64 to 95 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR3 PIFx LL_C2_EXTI_ReadFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @retval @note This bit is set when the selected edge event arrives on the interrupt + */ +__STATIC_INLINE uint32_t LL_C2_EXTI_ReadFlag_64_95(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->C2PR3, ExtiLine)); +} +/** + * @brief Clear ExtLine Flags for Lines in range 0 to 31 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR1 PIFx LL_C2_EXTI_ClearFlag_0_31 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_16 + * @arg @ref LL_EXTI_LINE_17 + * @arg @ref LL_EXTI_LINE_18 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_ClearFlag_0_31(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->C2PR1, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 32 to 63 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR2 PIFx LL_C2_EXTI_ClearFlag_32_63 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_51 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_ClearFlag_32_63(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->C2PR2, ExtiLine); +} + +/** + * @brief Clear ExtLine Flags for Lines in range 64 to 95 for cpu2 + * @note This bit is set when the selected edge event arrives on the interrupt + * line. This bit is cleared by writing a 1 to the bit. + * @rmtoll C2PR3 PIFx LL_C2_EXTI_ClearFlag_64_95 + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_82 + * @arg @ref LL_EXTI_LINE_84 + * @arg @ref LL_EXTI_LINE_85 + * @arg @ref LL_EXTI_LINE_86 + * @retval None + */ +__STATIC_INLINE void LL_C2_EXTI_ClearFlag_64_95(uint32_t ExtiLine) +{ + WRITE_REG(EXTI->C2PR3, ExtiLine); +} + +#endif /* DUAL_CORE */ + +/** + * @brief Enable ExtiLine D3 Pending Mask for Lines in range 0 to 31 + * @rmtoll D3PMR1 MRx LL_D3_EXTI_EnablePendMask_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_EnablePendMask_0_31(uint32_t ExtiLine) +{ + SET_BIT(EXTI->D3PMR1, ExtiLine); +} + +/** + * @brief Enable ExtiLine D3 Pending Mask for Lines in range 32 to 63 + * @rmtoll D3PMR2 MRx LL_D3_EXTI_EnablePendMask_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_EnablePendMask_32_63(uint32_t ExtiLine) +{ + SET_BIT(EXTI->D3PMR2, ExtiLine); +} + +/** + * @brief Disable ExtiLine D3 Pending Mask for Lines in range 0 to 31 + * @rmtoll D3PMR1 MRx LL_D3_EXTI_DisablePendMask_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_DisablePendMask_0_31(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->D3PMR1, ExtiLine); +} + +/** + * @brief Disable ExtiLine D3 Pending Mask for Lines in range 32 to 63 + * @rmtoll D3PMR2 MRx LL_D3_EXTI_DisablePendMask_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_DisablePendMask_32_63(uint32_t ExtiLine) +{ + CLEAR_BIT(EXTI->D3PMR2, ExtiLine); +} + +/** + * @brief Indicate if ExtiLine D3 Pending Mask is enabled for Lines in range 0 to 31 + * @rmtoll D3PMR1 MRx LL_D3_EXTI_IsEnabledPendMask_0_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_IsEnabledPendMask_0_31(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->D3PMR1, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Indicate if ExtiLine D3 Pending Mask is enabled for Lines in range 32 to 63 + * @rmtoll D3PMR2 MRx LL_D3_EXTI_IsEnabledPendMask_32_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_IsEnabledPendMask_32_63(uint32_t ExtiLine) +{ + return ((READ_BIT(EXTI->D3PMR2, ExtiLine) == (ExtiLine)) ? 1U : 0U); +} + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 0 to 15 + * @rmtoll D3PCR1L PCSx LL_D3_EXTI_SetPendClearSel_0_15 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_0_15(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR1L, ((ExtiLine * ExtiLine) * 3UL), ((ExtiLine * ExtiLine) * ClrSrc)); +} + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 16 to 31 + * @rmtoll D3PCR1H PCSx LL_D3_EXTI_SetPendClearSel_16_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_16_31(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR1H, (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * 3UL), (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * ClrSrc)); +} + + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 32 to 47 + * @rmtoll D3PCR2L PCSx LL_D3_EXTI_SetPendClearSel_32_47 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_32_47(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR2L, ((ExtiLine * ExtiLine) * 3UL), ((ExtiLine * ExtiLine) * ClrSrc)); +} + +/** + * @brief Set ExtLine D3 Domain Pend Clear Source selection for Lines in range 48 to 63 + * @rmtoll D3PCR2H PCSx LL_D3_EXTI_SetPendClearSel_48_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @param ClrSrc This parameter can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_D3_EXTI_SetPendClearSel_48_63(uint32_t ExtiLine, uint32_t ClrSrc) +{ + MODIFY_REG(EXTI->D3PCR2H, (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * 3UL), (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * ClrSrc)); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 0 to 15 + * @rmtoll D3PCR1L PCSx LL_D3_EXTI_GetPendClearSel_0_15 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_0 + * @arg @ref LL_EXTI_LINE_1 + * @arg @ref LL_EXTI_LINE_2 + * @arg @ref LL_EXTI_LINE_3 + * @arg @ref LL_EXTI_LINE_4 + * @arg @ref LL_EXTI_LINE_5 + * @arg @ref LL_EXTI_LINE_6 + * @arg @ref LL_EXTI_LINE_7 + * @arg @ref LL_EXTI_LINE_8 + * @arg @ref LL_EXTI_LINE_9 + * @arg @ref LL_EXTI_LINE_10 + * @arg @ref LL_EXTI_LINE_11 + * @arg @ref LL_EXTI_LINE_12 + * @arg @ref LL_EXTI_LINE_13 + * @arg @ref LL_EXTI_LINE_14 + * @arg @ref LL_EXTI_LINE_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_0_15(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR1L, ((ExtiLine * ExtiLine) * 3UL)) / (ExtiLine * ExtiLine)); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 16 to 31 + * @rmtoll D3PCR1H PCSx LL_D3_EXTI_GetPendClearSel_16_31 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_19 + * @arg @ref LL_EXTI_LINE_20 + * @arg @ref LL_EXTI_LINE_21 + * @arg @ref LL_EXTI_LINE_25 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_16_31(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR1H, (((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos)) * 3UL)) / ((ExtiLine >> EXTI_IMR1_IM16_Pos) * (ExtiLine >> EXTI_IMR1_IM16_Pos))); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 32 to 47 + * @rmtoll D3PCR2L PCSx LL_D3_EXTI_GetPendClearSel_32_47 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_34 + * @arg @ref LL_EXTI_LINE_35 + * @arg @ref LL_EXTI_LINE_41 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_32_47(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR2L, ((ExtiLine * ExtiLine) * 3UL)) / (ExtiLine * ExtiLine)); +} + +/** + * @brief Get ExtLine D3 Domain Pend Clear Source selection for Lines in range 48 to 63 + * @rmtoll D3PCR2H PCSx LL_D3_EXTI_GetPendClearSel_48_63 + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_48 + * @arg @ref LL_EXTI_LINE_49 + * @arg @ref LL_EXTI_LINE_50 + * @arg @ref LL_EXTI_LINE_51 + * @arg @ref LL_EXTI_LINE_52 + * @arg @ref LL_EXTI_LINE_53 + * @retval Returned value can be one of the following values: + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH6 + * @arg @ref LL_EXTI_D3_PEND_CLR_DMACH7 + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM4 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM5 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM2 (*) + * @arg @ref LL_EXTI_D3_PEND_CLR_LPTIM3 (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_D3_EXTI_GetPendClearSel_48_63(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(EXTI->D3PCR2H, (((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos)) * 3UL)) / ((ExtiLine >> EXTI_IMR2_IM48_Pos) * (ExtiLine >> EXTI_IMR2_IM48_Pos))); +} + + + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions + * @{, + */ + +ErrorStatus LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); +ErrorStatus LL_EXTI_DeInit(void); +void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* EXTI */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_EXTI_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h new file mode 100644 index 0000000..b51f9d3 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_gpio.h @@ -0,0 +1,984 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_GPIO_H +#define STM32H7xx_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) + +/** @defgroup GPIO_LL GPIO + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ +#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW +#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM +#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH +#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH + + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */ +#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */ +#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */ +#define LL_GPIO_AF_11 (0x000000BU) /*!< Select alternate function 11 */ +#define LL_GPIO_AF_12 (0x000000CU) /*!< Select alternate function 12 */ +#define LL_GPIO_AF_13 (0x000000DU) /*!< Select alternate function 13 */ +#define LL_GPIO_AF_14 (0x000000EU) /*!< Select alternate function 14 */ +#define LL_GPIO_AF_15 (0x000000FU) /*!< Select alternate function 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0), ((Pin * Pin) * Mode)); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0), ((Pin * Pin) * Speed)); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0), ((Pin * Pin) * Pull)); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0), + ((((Pin * Pin) * Pin) * Pin) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8), + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF15 depending on target. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @arg @ref LL_GPIO_AF_8 + * @arg @ref LL_GPIO_AF_9 + * @arg @ref LL_GPIO_AF_10 + * @arg @ref LL_GPIO_AF_11 + * @arg @ref LL_GPIO_AF_12 + * @arg @ref LL_GPIO_AF_13 + * @arg @ref LL_GPIO_AF_14 + * @arg @ref LL_GPIO_AF_15 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) * + (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U))); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BSRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask << 16U); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /*defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) || defined (GPIOJ) || defined (GPIOK) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_GPIO_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h new file mode 100644 index 0000000..cff88b5 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_hsem.h @@ -0,0 +1,902 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_hsem.h + * @author MCD Application Team + * @brief Header file of HSEM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_HSEM_H +#define STM32H7xx_LL_HSEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(HSEM) + +/** @defgroup HSEM_LL HSEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HSEM_LL_Exported_Constants HSEM Exported Constants + * @{ + */ + +/** @defgroup HSEM_LL_EC_COREID COREID Defines + * @{ + */ +#define LL_HSEM_COREID_NONE 0U +#define LL_HSEM_COREID_CPU1 HSEM_CR_COREID_CPU1 +#if defined(DUAL_CORE) +#define LL_HSEM_COREID_CPU2 HSEM_CR_COREID_CPU2 +#endif /* DUAL_CORE */ +#define LL_HSEM_COREID HSEM_CR_COREID_CURRENT +/** + * @} + */ + + +/** @defgroup HSEM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_HSEM_ReadReg function + * @{ + */ + +#define LL_HSEM_SEMAPHORE_0 HSEM_C1IER_ISE0 +#define LL_HSEM_SEMAPHORE_1 HSEM_C1IER_ISE1 +#define LL_HSEM_SEMAPHORE_2 HSEM_C1IER_ISE2 +#define LL_HSEM_SEMAPHORE_3 HSEM_C1IER_ISE3 +#define LL_HSEM_SEMAPHORE_4 HSEM_C1IER_ISE4 +#define LL_HSEM_SEMAPHORE_5 HSEM_C1IER_ISE5 +#define LL_HSEM_SEMAPHORE_6 HSEM_C1IER_ISE6 +#define LL_HSEM_SEMAPHORE_7 HSEM_C1IER_ISE7 +#define LL_HSEM_SEMAPHORE_8 HSEM_C1IER_ISE8 +#define LL_HSEM_SEMAPHORE_9 HSEM_C1IER_ISE9 +#define LL_HSEM_SEMAPHORE_10 HSEM_C1IER_ISE10 +#define LL_HSEM_SEMAPHORE_11 HSEM_C1IER_ISE11 +#define LL_HSEM_SEMAPHORE_12 HSEM_C1IER_ISE12 +#define LL_HSEM_SEMAPHORE_13 HSEM_C1IER_ISE13 +#define LL_HSEM_SEMAPHORE_14 HSEM_C1IER_ISE14 +#define LL_HSEM_SEMAPHORE_15 HSEM_C1IER_ISE15 +#if (HSEM_SEMID_MAX == 15) +#define LL_HSEM_SEMAPHORE_ALL 0x0000FFFFU +#else /* HSEM_SEMID_MAX == 31 */ +#define LL_HSEM_SEMAPHORE_16 HSEM_C1IER_ISE16 +#define LL_HSEM_SEMAPHORE_17 HSEM_C1IER_ISE17 +#define LL_HSEM_SEMAPHORE_18 HSEM_C1IER_ISE18 +#define LL_HSEM_SEMAPHORE_19 HSEM_C1IER_ISE19 +#define LL_HSEM_SEMAPHORE_20 HSEM_C1IER_ISE20 +#define LL_HSEM_SEMAPHORE_21 HSEM_C1IER_ISE21 +#define LL_HSEM_SEMAPHORE_22 HSEM_C1IER_ISE22 +#define LL_HSEM_SEMAPHORE_23 HSEM_C1IER_ISE23 +#define LL_HSEM_SEMAPHORE_24 HSEM_C1IER_ISE24 +#define LL_HSEM_SEMAPHORE_25 HSEM_C1IER_ISE25 +#define LL_HSEM_SEMAPHORE_26 HSEM_C1IER_ISE26 +#define LL_HSEM_SEMAPHORE_27 HSEM_C1IER_ISE27 +#define LL_HSEM_SEMAPHORE_28 HSEM_C1IER_ISE28 +#define LL_HSEM_SEMAPHORE_29 HSEM_C1IER_ISE29 +#define LL_HSEM_SEMAPHORE_30 HSEM_C1IER_ISE30 +#define LL_HSEM_SEMAPHORE_31 HSEM_C1IER_ISE31 +#define LL_HSEM_SEMAPHORE_ALL 0xFFFFFFFFU +#endif /* HSEM_SEMID_MAX == 15 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup HSEM_LL_Exported_Macros HSEM Exported Macros + * @{ + */ + +/** @defgroup HSEM_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in HSEM register + * @param __INSTANCE__ HSEM Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_HSEM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in HSEM register + * @param __INSTANCE__ HSEM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_HSEM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup HSEM_LL_Exported_Functions HSEM Exported Functions + * @{ + */ + +/** @defgroup HSEM_LL_EF_Data_Management Data_Management + * @{ + */ + + +/** + * @brief Return 1 if the semaphore is locked, else return 0. + * @rmtoll R LOCK LL_HSEM_IsSemaphoreLocked + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsSemaphoreLocked(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return ((READ_BIT(HSEMx->R[Semaphore], HSEM_R_LOCK) == (HSEM_R_LOCK_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Get core id. + * @rmtoll R COREID LL_HSEM_GetCoreId + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval Returned value can be one of the following values: + * @arg @ref LL_HSEM_COREID_NONE + * @arg @ref LL_HSEM_COREID_CPU1 + * @arg @ref LL_HSEM_COREID_CPU2 + */ +__STATIC_INLINE uint32_t LL_HSEM_GetCoreId(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_COREID_Msk)); +} + +/** + * @brief Get process id. + * @rmtoll R PROCID LL_HSEM_GetProcessId + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval Process number. Value between Min_Data=0 and Max_Data=255 + */ +__STATIC_INLINE uint32_t LL_HSEM_GetProcessId(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return (uint32_t)(READ_BIT(HSEMx->R[Semaphore], HSEM_R_PROCID_Msk)); +} + +/** + * @brief Get the lock by writing in R register. + * @note The R register has to be read to determined if the lock is taken. + * @rmtoll R LOCK LL_HSEM_SetLock + * @rmtoll R COREID LL_HSEM_SetLock + * @rmtoll R PROCID LL_HSEM_SetLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @param process Process id. Value between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_HSEM_SetLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) +{ + WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process)); +} + +/** + * @brief Get the lock with 2-step lock. + * @rmtoll R LOCK LL_HSEM_2StepLock + * @rmtoll R COREID LL_HSEM_2StepLock + * @rmtoll R PROCID LL_HSEM_2StepLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @param process Process id. Value between Min_Data=0 and Max_Data=255 + * @retval 1 lock fail, 0 lock successful or already locked by same process and core + */ +__STATIC_INLINE uint32_t LL_HSEM_2StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) +{ + WRITE_REG(HSEMx->R[Semaphore], (HSEM_R_LOCK | LL_HSEM_COREID | process)); + return ((HSEMx->R[Semaphore] != (HSEM_R_LOCK | LL_HSEM_COREID | process)) ? 1UL : 0UL); +} + +/** + * @brief Get the lock with 1-step lock. + * @rmtoll RLR LOCK LL_HSEM_1StepLock + * @rmtoll RLR COREID LL_HSEM_1StepLock + * @rmtoll RLR PROCID LL_HSEM_1StepLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval 1 lock fail, 0 lock successful or already locked by same core + */ +__STATIC_INLINE uint32_t LL_HSEM_1StepLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return ((HSEMx->RLR[Semaphore] != (HSEM_RLR_LOCK | LL_HSEM_COREID)) ? 1UL : 0UL); +} + +/** + * @brief Release the lock of the semaphore. + * @note In case of LL_HSEM_1StepLock usage to lock a semaphore, the process is 0. + * @rmtoll R LOCK LL_HSEM_ReleaseLock + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @param process Process number. Value between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ReleaseLock(HSEM_TypeDef *HSEMx, uint32_t Semaphore, uint32_t process) +{ + WRITE_REG(HSEMx->R[Semaphore], (LL_HSEM_COREID | process)); +} + +/** + * @brief Get the lock status of the semaphore. + * @rmtoll R LOCK LL_HSEM_GetStatus + * @param HSEMx HSEM Instance. + * @param Semaphore Semaphore number. Value between Min_Data=0 and Max_Data=31 + * @retval 0 semaphore is free, 1 semaphore is locked */ +__STATIC_INLINE uint32_t LL_HSEM_GetStatus(HSEM_TypeDef *HSEMx, uint32_t Semaphore) +{ + return ((HSEMx->R[Semaphore] != 0U) ? 1UL : 0UL); +} + +/** + * @brief Set the key. + * @rmtoll KEYR KEY LL_HSEM_SetKey + * @param HSEMx HSEM Instance. + * @param key Key value. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_SetKey(HSEM_TypeDef *HSEMx, uint32_t key) +{ + WRITE_REG(HSEMx->KEYR, key << HSEM_KEYR_KEY_Pos); +} + +/** + * @brief Get the key. + * @rmtoll KEYR KEY LL_HSEM_GetKey + * @param HSEMx HSEM Instance. + * @retval key to unlock all semaphore from the same core + */ +__STATIC_INLINE uint32_t LL_HSEM_GetKey(HSEM_TypeDef *HSEMx) +{ + return (uint32_t)(READ_BIT(HSEMx->KEYR, HSEM_KEYR_KEY) >> HSEM_KEYR_KEY_Pos); +} + +/** + * @brief Release all semaphore with the same core id. + * @rmtoll CR KEY LL_HSEM_ResetAllLock + * @rmtoll CR SEC LL_HSEM_ResetAllLock + * @rmtoll CR PRIV LL_HSEM_ResetAllLock + * @param HSEMx HSEM Instance. + * @param key Key value. + * @param core This parameter can be one of the following values: + * @arg @ref LL_HSEM_COREID_CPU1 + * @arg @ref LL_HSEM_COREID_CPU2 + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ResetAllLock(HSEM_TypeDef *HSEMx, uint32_t key, uint32_t core) +{ + WRITE_REG(HSEMx->CR, (key << HSEM_CR_KEY_Pos) | core); +} + +/** + * @} + */ + +/** @defgroup HSEM_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable interrupt. + * @rmtoll C1IER ISEM LL_HSEM_EnableIT_C1IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_EnableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + SET_BIT(HSEMx->C1IER, SemaphoreMask); +} + +/** + * @brief Disable interrupt. + * @rmtoll C1IER ISEM LL_HSEM_DisableIT_C1IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_DisableIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + CLEAR_BIT(HSEMx->C1IER, SemaphoreMask); +} + +/** + * @brief Check if interrupt is enabled. + * @rmtoll C1IER ISEM LL_HSEM_IsEnabledIT_C1IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C1IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C1IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable interrupt. + * @rmtoll C2IER ISEM LL_HSEM_EnableIT_C2IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval None + */ +__STATIC_INLINE void LL_HSEM_EnableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + SET_BIT(HSEMx->C2IER, SemaphoreMask); +} + +/** + * @brief Disable interrupt. + * @rmtoll C2IER ISEM LL_HSEM_DisableIT_C2IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval None + */ +__STATIC_INLINE void LL_HSEM_DisableIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + CLEAR_BIT(HSEMx->C2IER, SemaphoreMask); +} + +/** + * @brief Check if interrupt is enabled. + * @rmtoll C2IER ISEM LL_HSEM_IsEnabledIT_C2IER + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsEnabledIT_C2IER(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C2IER, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** @defgroup HSEM_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Clear interrupt status. + * @rmtoll C1ICR ISEM LL_HSEM_ClearFlag_C1ICR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ClearFlag_C1ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + WRITE_REG(HSEMx->C1ICR, SemaphoreMask); +} + +/** + * @brief Get interrupt status from ISR register. + * @rmtoll C1ISR ISEM LL_HSEM_IsActiveFlag_C1ISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C1ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +/** + * @brief Get interrupt status from MISR register. + * @rmtoll C1MISR ISEM LL_HSEM_IsActiveFlag_C1MISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @note Availability of flags LL_HSEM_SEMAPHORE_16 to LL_HSEM_SEMAPHORE_31 + * depends on devices. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C1MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C1MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Clear interrupt status. + * @rmtoll C2ICR ISEM LL_HSEM_ClearFlag_C2ICR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval None + */ +__STATIC_INLINE void LL_HSEM_ClearFlag_C2ICR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + WRITE_REG(HSEMx->C2ICR, SemaphoreMask); +} + +/** + * @brief Get interrupt status from ISR register. + * @rmtoll C2ISR ISEM LL_HSEM_IsActiveFlag_C2ISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2ISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C2ISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} + +/** + * @brief Get interrupt status from MISR register. + * @rmtoll C2MISR ISEM LL_HSEM_IsActiveFlag_C2MISR + * @param HSEMx HSEM Instance. + * @param SemaphoreMask This parameter can be a combination of the following values: + * @arg @ref LL_HSEM_SEMAPHORE_0 + * @arg @ref LL_HSEM_SEMAPHORE_1 + * @arg @ref LL_HSEM_SEMAPHORE_2 + * @arg @ref LL_HSEM_SEMAPHORE_3 + * @arg @ref LL_HSEM_SEMAPHORE_4 + * @arg @ref LL_HSEM_SEMAPHORE_5 + * @arg @ref LL_HSEM_SEMAPHORE_6 + * @arg @ref LL_HSEM_SEMAPHORE_7 + * @arg @ref LL_HSEM_SEMAPHORE_8 + * @arg @ref LL_HSEM_SEMAPHORE_9 + * @arg @ref LL_HSEM_SEMAPHORE_10 + * @arg @ref LL_HSEM_SEMAPHORE_11 + * @arg @ref LL_HSEM_SEMAPHORE_12 + * @arg @ref LL_HSEM_SEMAPHORE_13 + * @arg @ref LL_HSEM_SEMAPHORE_14 + * @arg @ref LL_HSEM_SEMAPHORE_15 + * @arg @ref LL_HSEM_SEMAPHORE_16 + * @arg @ref LL_HSEM_SEMAPHORE_17 + * @arg @ref LL_HSEM_SEMAPHORE_18 + * @arg @ref LL_HSEM_SEMAPHORE_19 + * @arg @ref LL_HSEM_SEMAPHORE_20 + * @arg @ref LL_HSEM_SEMAPHORE_21 + * @arg @ref LL_HSEM_SEMAPHORE_22 + * @arg @ref LL_HSEM_SEMAPHORE_23 + * @arg @ref LL_HSEM_SEMAPHORE_24 + * @arg @ref LL_HSEM_SEMAPHORE_25 + * @arg @ref LL_HSEM_SEMAPHORE_26 + * @arg @ref LL_HSEM_SEMAPHORE_27 + * @arg @ref LL_HSEM_SEMAPHORE_28 + * @arg @ref LL_HSEM_SEMAPHORE_29 + * @arg @ref LL_HSEM_SEMAPHORE_30 + * @arg @ref LL_HSEM_SEMAPHORE_31 + * @arg @ref LL_HSEM_SEMAPHORE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_HSEM_IsActiveFlag_C2MISR(HSEM_TypeDef *HSEMx, uint32_t SemaphoreMask) +{ + return ((READ_BIT(HSEMx->C2MISR, SemaphoreMask) == (SemaphoreMask)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(HSEM) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_HSEM_H */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h new file mode 100644 index 0000000..be137a4 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_pwr.h @@ -0,0 +1,2301 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_PWR_H +#define STM32H7xx_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PWR_LL_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_LL_WAKEUP_PIN_OFFSET Wake-Up Pins register offsets Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +/* Wake-Up Pins PWR register offsets */ +#define LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET 2UL +#define LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK 0x1FU +/** + * @} + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_PWR_WriteReg function + * @{ + */ +#define LL_PWR_FLAG_CPU_CSSF PWR_CPUCR_CSSF /*!< Clear flags for CPU */ +#if defined (DUAL_CORE) +#define LL_PWR_FLAG_CPU2_CSSF PWR_CPU2CR_CSSF /*!< Clear flags for CPU2 */ +#endif /* DUAL_CORE */ +#define LL_PWR_FLAG_WKUPCR_WKUPC6 PWR_WKUPCR_WKUPC6 /*!< Clear PC1 WKUP flag */ +#if defined (PWR_WKUPCR_WKUPC5) +#define LL_PWR_FLAG_WKUPCR_WKUPC5 PWR_WKUPCR_WKUPC5 /*!< Clear PI11 WKUP flag */ +#endif /* defined (PWR_WKUPCR_WKUPC5) */ +#define LL_PWR_FLAG_WKUPCR_WKUPC4 PWR_WKUPCR_WKUPC4 /*!< Clear PC13 WKUP flag */ +#if defined (PWR_WKUPCR_WKUPC3) +#define LL_PWR_FLAG_WKUPCR_WKUPC3 PWR_WKUPCR_WKUPC3 /*!< Clear PI8 WKUP flag */ +#endif /* defined (PWR_WKUPCR_WKUPC3) */ +#define LL_PWR_FLAG_WKUPCR_WKUPC2 PWR_WKUPCR_WKUPC2 /*!< Clear PA2 WKUP flag */ +#define LL_PWR_FLAG_WKUPCR_WKUPC1 PWR_WKUPCR_WKUPC1 /*!< Clear PA0 WKUP flag */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_PWR_ReadReg function + * @{ + */ +#define LL_PWR_FLAG_AVDO PWR_CSR1_AVDO /*!< Analog voltage detector output on VDDA flag */ +#define LL_PWR_FLAG_PVDO PWR_CSR1_PVDO /*!< Programmable voltage detect output flag */ +#define LL_PWR_FLAG_ACTVOS PWR_CSR1_ACTVOS /*!< Current VOS applied for VCORE voltage scaling flag */ +#define LL_PWR_FLAG_ACTVOSRDY PWR_CSR1_ACTVOSRDY /*!< Ready bit for current actual used VOS for VCORE voltage scaling flag */ +#if defined (PWR_CSR1_MMCVDO) +#define LL_PWR_FLAG_MMCVDO PWR_CSR1_MMCVDO /*!< Voltage detector output on VDDMMC flag */ +#endif /* PWR_CSR1_MMCVDO */ + +#define LL_PWR_FLAG_TEMPH PWR_CR2_TEMPH /*!< Temperature high threshold flag */ +#define LL_PWR_FLAG_TEMPL PWR_CR2_TEMPL /*!< Temperature low threshold flag */ +#define LL_PWR_FLAG_VBATH PWR_CR2_VBATH /*!< VBAT high threshold flag */ +#define LL_PWR_FLAG_VBATL PWR_CR2_VBATL /*!< VBAT low threshold flag */ +#define LL_PWR_FLAG_BRRDY PWR_CR2_BRRDY /*!< Backup Regulator ready flag */ + +#define LL_PWR_FLAG_USBRDY PWR_CR3_USB33RDY /*!< USB supply ready flag */ +#define LL_PWR_FLAG_SMPSEXTRDY PWR_CR3_SMPSEXTRDY /*!< SMPS External supply ready flag */ + +#if defined (PWR_CPUCR_SBF_D2) +#define LL_PWR_FLAG_CPU_SBF_D2 PWR_CPUCR_SBF_D2 /*!< D2 domain DSTANDBY Flag */ +#endif /* PWR_CPUCR_SBF_D2 */ +#if defined (PWR_CPUCR_SBF_D1) +#define LL_PWR_FLAG_CPU_SBF_D1 PWR_CPUCR_SBF_D1 /*!< D1 domain DSTANDBY Flag */ +#endif /* PWR_CPUCR_SBF_D1 */ +#define LL_PWR_FLAG_CPU_SBF PWR_CPUCR_SBF /*!< System STANDBY Flag */ +#define LL_PWR_FLAG_CPU_STOPF PWR_CPUCR_STOPF /*!< STOP Flag */ +#if defined (DUAL_CORE) +#define LL_PWR_FLAG_CPU_HOLD2F PWR_CPUCR_HOLD2F /*!< CPU2 in hold wakeup flag */ +#endif /* DUAL_CORE */ + +#if defined (DUAL_CORE) +#define LL_PWR_FLAG_CPU2_SBF_D2 PWR_CPU2CR_SBF_D2 /*!< D2 domain DSTANDBY Flag */ +#define LL_PWR_FLAG_CPU2_SBF_D1 PWR_CPU2CR_SBF_D1 /*!< D1 domain DSTANDBY Flag */ +#define LL_PWR_FLAG_CPU2_SBF PWR_CPU2CR_SBF /*!< System STANDBY Flag */ +#define LL_PWR_FLAG_CPU2_STOPF PWR_CPU2CR_STOPF /*!< STOP Flag */ +#define LL_PWR_FLAG_CPU2_HOLD1F PWR_CPU2CR_HOLD1F /*!< CPU1 in hold wakeup flag */ +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_D3CR_VOSRDY PWR_D3CR_VOSRDY /*!< Voltage scaling ready flag */ +#else +#define LL_PWR_SRDCR_VOSRDY PWR_SRDCR_VOSRDY /*!< Voltage scaling ready flag */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#define LL_PWR_WKUPFR_WKUPF6 PWR_WKUPFR_WKUPF6 /*!< Wakeup flag on PC1 */ +#if defined (PWR_WKUPFR_WKUPF5) +#define LL_PWR_WKUPFR_WKUPF5 PWR_WKUPFR_WKUPF5 /*!< Wakeup flag on PI11 */ +#endif /* defined (PWR_WKUPFR_WKUPF5) */ +#define LL_PWR_WKUPFR_WKUPF4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC13 */ +#if defined (PWR_WKUPFR_WKUPF3) +#define LL_PWR_WKUPFR_WKUPF3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PI8 */ +#endif /* defined (PWR_WKUPFR_WKUPF3) */ +#define LL_PWR_WKUPFR_WKUPF2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */ +#define LL_PWR_WKUPFR_WKUPF1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_MODE_PWR Power mode + * @{ + */ +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_CPU_MODE_D1STOP 0x00000000U /*!< Enter D1 domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_D1STANDBY PWR_CPUCR_PDDS_D1 /*!< Enter D1 domain to Standby mode when the CPU enters deepsleep */ +#else +#define LL_PWR_CPU_MODE_CDSTOP 0x00000000U /*!< Enter CD domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_CDSTOP2 PWR_CPUCR_RETDS_CD /*!< Enter CD domain to Stop2 mode when the CPU enters deepsleep */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_CPU_MODE_D2STOP 0x00000000U /*!< Enter D2 domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_D2STANDBY PWR_CPUCR_PDDS_D2 /*!< Enter D2 domain to Standby mode when the CPU enters deepsleep */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_CPU_MODE_D3RUN PWR_CPUCR_RUN_D3 /*!< Keep system D3 domain in Run mode when the CPU enter deepsleep */ +#define LL_PWR_CPU_MODE_D3STOP 0x00000000U /*!< Enter D3 domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_D3STANDBY PWR_CPUCR_PDDS_D3 /*!< Enter D3 domain to Standby mode when the CPU enters deepsleep */ +#else +#define LL_PWR_CPU_MODE_SRDRUN PWR_CPUCR_RUN_SRD /*!< Keep system SRD domain in Run mode when the CPU enter deepsleep */ +#define LL_PWR_CPU_MODE_SRDSTOP 0x00000000U /*!< Enter SRD domain to Stop mode when the CPU enters deepsleep */ +#define LL_PWR_CPU_MODE_SRDSTANDBY PWR_CPUCR_PDDS_SRD /*!< Enter SRD domain to Standby mode when the CPU enters deepsleep */ +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +#define LL_PWR_CPU2_MODE_D1STOP 0x00000000U /*!< Enter D1 domain to Stop mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D1STANDBY PWR_CPU2CR_PDDS_D1 /*!< Enter D1 domain to Standby mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D2STOP 0x00000000U /*!< Enter D2 domain to Stop mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D2STANDBY PWR_CPU2CR_PDDS_D2 /*!< Enter D2 domain to Standby mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D3RUN PWR_CPU2CR_RUN_D3 /*!< Keep system D3 domain in RUN mode when the CPU2 enter deepsleep */ +#define LL_PWR_CPU2_MODE_D3STOP 0x00000000U /*!< Enter D3 domain to Stop mode when the CPU2 enters deepsleep */ +#define LL_PWR_CPU2_MODE_D3STANDBY PWR_CPU2CR_PDDS_D3 /*!< Enter D3 domain to Standby mode when the CPU2 enter deepsleep */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_VOLTAGE Run mode Regulator Voltage Scaling + * @{ + */ +#if defined (PWR_CPUCR_PDDS_D2) +#define LL_PWR_REGU_VOLTAGE_SCALE3 PWR_D3CR_VOS_0 /*!< Select voltage scale 3 */ +#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_D3CR_VOS_1 /*!< Select voltage scale 2 */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_D3CR_VOS_0 | PWR_D3CR_VOS_1) /*!< Select voltage scale 1 */ +#if defined (SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ +#define LL_PWR_REGU_VOLTAGE_SCALE0 (PWR_D3CR_VOS_0 | PWR_D3CR_VOS_1) /*!< Select voltage scale 0 */ +#else +#define LL_PWR_REGU_VOLTAGE_SCALE0 0x00000000U /*!< Select voltage scale 0 */ +#endif /* defined (SYSCFG_PWRCR_ODEN) */ +#else +#define LL_PWR_REGU_VOLTAGE_SCALE3 0x00000000U /*!< Select voltage scale 3 */ +#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_D3CR_VOS_0 /*!< Select voltage scale 2 */ +#define LL_PWR_REGU_VOLTAGE_SCALE1 PWR_D3CR_VOS_1 /*!< Select voltage scale 1 */ +#define LL_PWR_REGU_VOLTAGE_SCALE0 (PWR_D3CR_VOS_0 | PWR_D3CR_VOS_1) /*!< Select voltage scale 0 */ +#endif /* PWR_CPUCR_PDDS_D2 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_STOP_MODE_REGU_VOLTAGE Stop mode Regulator Voltage Scaling + * @{ + */ +#define LL_PWR_REGU_VOLTAGE_SVOS_SCALE5 PWR_CR1_SVOS_0 /*!< Select voltage scale 5 when system enters STOP mode */ +#define LL_PWR_REGU_VOLTAGE_SVOS_SCALE4 PWR_CR1_SVOS_1 /*!< Select voltage scale 4 when system enters STOP mode */ +#define LL_PWR_REGU_VOLTAGE_SVOS_SCALE3 (PWR_CR1_SVOS_0 | PWR_CR1_SVOS_1) /*!< Select voltage scale 3 when system enters STOP mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode + * @{ + */ +#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */ +#define LL_PWR_REGU_DSMODE_LOW_POWER PWR_CR1_LPDS /*!< Voltage Regulator in low-power mode during deepsleep mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_PVDLEVEL Power Digital Voltage Level Detector + * @{ + */ +#define LL_PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Voltage threshold detected by PVD 1.95 V */ +#define LL_PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Voltage threshold detected by PVD 2.1 V */ +#define LL_PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Voltage threshold detected by PVD 2.25 V */ +#define LL_PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Voltage threshold detected by PVD 2.4 V */ +#define LL_PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Voltage threshold detected by PVD 2.55 V */ +#define LL_PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Voltage threshold detected by PVD 2.7 V */ +#define LL_PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Voltage threshold detected by PVD 2.85 V */ +#define LL_PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External voltage level on PVD_IN pin, compared to internal VREFINT level. */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_AVDLEVEL Power Analog Voltage Level Detector + * @{ + */ +#define LL_PWR_AVDLEVEL_0 PWR_CR1_ALS_LEV0 /*!< Analog Voltage threshold detected by AVD 1.7 V */ +#define LL_PWR_AVDLEVEL_1 PWR_CR1_ALS_LEV1 /*!< Analog Voltage threshold detected by AVD 2.1 V */ +#define LL_PWR_AVDLEVEL_2 PWR_CR1_ALS_LEV2 /*!< Analog Voltage threshold detected by AVD 2.5 V */ +#define LL_PWR_AVDLEVEL_3 PWR_CR1_ALS_LEV3 /*!< Analog Voltage threshold detected by AVD 2.8 V */ + +/** + * @} + */ + +/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR Battery Charge Resistor + * @{ + */ +#define LL_PWR_BATT_CHARG_RESISTOR_5K 0x00000000U /*!< Charge the Battery through a 5 kO resistor */ +#define LL_PWR_BATT_CHARGRESISTOR_1_5K PWR_CR3_VBRS /*!< Charge the Battery through a 1.5 kO resistor */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins + * @{ + */ +#define LL_PWR_WAKEUP_PIN1 PWR_WKUPEPR_WKUPEN1 /*!< Wake-Up pin 1 : PA0 */ +#define LL_PWR_WAKEUP_PIN2 PWR_WKUPEPR_WKUPEN2 /*!< Wake-Up pin 2 : PA2 */ +#if defined (PWR_WKUPEPR_WKUPEN3) +#define LL_PWR_WAKEUP_PIN3 PWR_WKUPEPR_WKUPEN3 /*!< Wake-Up pin 3 : PI8 */ +#endif /* defined (PWR_WKUPEPR_WKUPEN3) */ +#define LL_PWR_WAKEUP_PIN4 PWR_WKUPEPR_WKUPEN4 /*!< Wake-Up pin 4 : PC13 */ +#if defined (PWR_WKUPEPR_WKUPEN5) +#define LL_PWR_WAKEUP_PIN5 PWR_WKUPEPR_WKUPEN5 /*!< Wake-Up pin 5 : PI11 */ +#endif /* defined (PWR_WKUPEPR_WKUPEN5) */ +#define LL_PWR_WAKEUP_PIN6 PWR_WKUPEPR_WKUPEN6 /*!< Wake-Up pin 6 : PC1 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_WAKEUP_PIN_PULL Wakeup Pins pull configuration + * @{ + */ +#define LL_PWR_WAKEUP_PIN_NOPULL 0x00000000UL /*!< Configure Wake-Up pin in no pull */ +#define LL_PWR_WAKEUP_PIN_PULLUP 0x00000001UL /*!< Configure Wake-Up pin in pull Up */ +#define LL_PWR_WAKEUP_PIN_PULLDOWN 0x00000002UL /*!< Configure Wake-Up pin in pull Down */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_SUPPLY_PWR Power supply source configuration + * @{ + */ +#define LL_PWR_LDO_SUPPLY PWR_CR3_LDOEN /*!< Core domains are supplied from the LDO */ +#if defined (SMPS) +#define LL_PWR_DIRECT_SMPS_SUPPLY PWR_CR3_SMPSEN /*!< Core domains are supplied from the SMPS */ +#define LL_PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */ +#define LL_PWR_SMPS_2V5_SUPPLIES_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies the LDO which supplies the Core domains */ +#define LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 1.8V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN) /*!< The SMPS 2.5V output supplies an external circuits and the LDO. The Core domains are supplied from the LDO */ +#define LL_PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_0 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 1.8V output supplies an external source which supplies the Core domains */ +#define LL_PWR_SMPS_2V5_SUPPLIES_EXT (PWR_CR3_SMPSLEVEL_1 | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_BYPASS) /*!< The SMPS 2.5V output supplies an external source which supplies the Core domains */ +#endif /* SMPS */ +#define LL_PWR_EXTERNAL_SOURCE_SUPPLY PWR_CR3_BYPASS /*!< The SMPS and the LDO are Bypassed. The Core domains are supplied from an external source */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_EF_Configuration Configuration + * @{ + */ + + /** + * @brief Set the voltage Regulator mode during deep sleep mode + * @rmtoll CR1 LPDS LL_PWR_SetRegulModeDS + * @param RegulMode This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_LPDS, RegulMode); +} + +/** + * @brief Get the voltage Regulator mode during deep sleep mode + * @rmtoll CR1 LPDS LL_PWR_GetRegulModeDS + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_DSMODE_MAIN + * @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPDS)); +} + +/** + * @brief Enable Power Voltage Detector + * @rmtoll CR1 PVDEN LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Disable Power Voltage Detector + * @rmtoll CR1 PVDEN LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Check if Power Voltage Detector is enabled + * @rmtoll CR1 PVDEN LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_PVDEN) == (PWR_CR1_PVDEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector + * @rmtoll CR1 PLS LL_PWR_SetPVDLevel + * @param PVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_PLS, PVDLevel); +} + +/** + * @brief Get the voltage threshold detection + * @rmtoll CR1 PLS LL_PWR_GetPVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_PLS)); +} + +/** + * @brief Enable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain + * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Check if the backup domain is enabled + * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Flash Power Down in Stop Mode + * @rmtoll CR1 FLPS LL_PWR_EnableFlashPowerDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableFlashPowerDown(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Disable the Flash Power Down in Stop Mode + * @rmtoll CR1 FLPS LL_PWR_DisableFlashPowerDown + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableFlashPowerDown(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Check if the Flash Power Down in Stop Mode is enabled + * @rmtoll CR1 FLPS LL_PWR_IsEnabledFlashPowerDown + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledFlashPowerDown(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_FLPS) == (PWR_CR1_FLPS)) ? 1UL : 0UL); +} + +#if defined (PWR_CR1_BOOSTE) +/** + * @brief Enable the Analog Voltage Booster (VDDA) + * @rmtoll CR1 BOOSTE LL_PWR_EnableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAnalogBooster(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Disable the Analog Voltage Booster (VDDA) + * @rmtoll CR1 BOOSTE LL_PWR_DisableAnalogBooster + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAnalogBooster(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Check if the Analog Voltage Booster (VDDA) is enabled + * @rmtoll CR1 BOOSTE LL_PWR_IsEnabledAnalogBooster + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAnalogBooster(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_BOOSTE) == (PWR_CR1_BOOSTE)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_BOOSTE */ + +#if defined (PWR_CR1_AVD_READY) +/** + * @brief Enable the Analog Voltage Ready to isolate the BOOST IP until VDDA will be ready + * @rmtoll CR1 AVD_READY LL_PWR_EnableAnalogVoltageReady + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAnalogVoltageReady(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AVD_READY); +} + +/** + * @brief Disable the Analog Voltage Ready (VDDA) + * @rmtoll CR1 AVD_READY LL_PWR_DisableAnalogVoltageReady + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAnalogVoltageReady(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVD_READY); +} + +/** + * @brief Check if the Analog Voltage Booster (VDDA) is enabled + * @rmtoll CR1 AVD_READY LL_PWR_IsEnabledAnalogVoltageReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAnalogVoltageReady(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AVD_READY) == (PWR_CR1_AVD_READY)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AVD_READY */ + +/** + * @brief Set the internal Regulator output voltage in STOP mode + * @rmtoll CR1 SVOS LL_PWR_SetStopModeRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE3 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE4 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetStopModeRegulVoltageScaling(uint32_t VoltageScaling) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_SVOS, VoltageScaling); +} + +/** + * @brief Get the internal Regulator output voltage in STOP mode + * @rmtoll CR1 SVOS LL_PWR_GetStopModeRegulVoltageScaling + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE3 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE4 + * @arg @ref LL_PWR_REGU_VOLTAGE_SVOS_SCALE5 + */ +__STATIC_INLINE uint32_t LL_PWR_GetStopModeRegulVoltageScaling(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_SVOS)); +} + +/** + * @brief Enable Analog Power Voltage Detector + * @rmtoll CR1 AVDEN LL_PWR_EnableAVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAVD(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Disable Analog Power Voltage Detector + * @rmtoll CR1 AVDEN LL_PWR_DisableAVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAVD(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Check if Analog Power Voltage Detector is enabled + * @rmtoll CR1 AVDEN LL_PWR_IsEnabledAVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAVD(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AVDEN) == (PWR_CR1_AVDEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the voltage threshold to be detected by the Analog Power Voltage Detector + * @rmtoll CR1 ALS LL_PWR_SetAVDLevel + * @param AVDLevel This parameter can be one of the following values: + * @arg @ref LL_PWR_AVDLEVEL_0 + * @arg @ref LL_PWR_AVDLEVEL_1 + * @arg @ref LL_PWR_AVDLEVEL_2 + * @arg @ref LL_PWR_AVDLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetAVDLevel(uint32_t AVDLevel) +{ + MODIFY_REG(PWR->CR1, PWR_CR1_ALS, AVDLevel); +} + +/** + * @brief Get the Analog Voltage threshold to be detected by the Analog Power Voltage Detector + * @rmtoll CR1 ALS LL_PWR_GetAVDLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_AVDLEVEL_0 + * @arg @ref LL_PWR_AVDLEVEL_1 + * @arg @ref LL_PWR_AVDLEVEL_2 + * @arg @ref LL_PWR_AVDLEVEL_3 + */ +__STATIC_INLINE uint32_t LL_PWR_GetAVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_ALS)); +} + +#if defined (PWR_CR1_AXIRAM1SO) +/** + * @brief Enable the AXI RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM1SO LL_PWR_EnableAXIRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAXIRAM1ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AXIRAM1SO); +} + +/** + * @brief Disable the AXI RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM1SO LL_PWR_DisableAXIRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAXIRAM1ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AXIRAM1SO); +} + +/** + * @brief Check if the AXI RAM1 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AXIRAM1SO LL_PWR_IsEnabledAXIRAM1ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAXIRAM1ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AXIRAM1SO) == (PWR_CR1_AXIRAM1SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AXIRAM1SO */ + +#if defined (PWR_CR1_AXIRAM2SO) +/** + * @brief Enable the AXI RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM2SO LL_PWR_EnableAXIRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAXIRAM2ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AXIRAM2SO); +} + +/** + * @brief Disable the AXI RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM2SO LL_PWR_DisableAXIRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAXIRAM2ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AXIRAM2SO); +} + +/** + * @brief Check if the AXI RAM2 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AXIRAM2SO LL_PWR_IsEnabledAXIRAM2ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAXIRAM2ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AXIRAM2SO) == (PWR_CR1_AXIRAM2SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AXIRAM2SO */ + +#if defined (PWR_CR1_AXIRAM3SO) +/** + * @brief Enable the AXI RAM3 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM3SO LL_PWR_EnableAXIRAM3ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAXIRAM3ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AXIRAM3SO); +} + +/** + * @brief Disable the AXI RAM3 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AXIRAM3SO LL_PWR_DisableAXIRAM3ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAXIRAM3ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AXIRAM3SO); +} + +/** + * @brief Check if the AXI RAM3 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AXIRAM3SO LL_PWR_IsEnabledAXIRAM3ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAXIRAM3ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AXIRAM3SO) == (PWR_CR1_AXIRAM3SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AXIRAM3SO */ + +#if defined (PWR_CR1_AHBRAM1SO) +/** + * @brief Enable the AHB RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM1SO LL_PWR_EnableAHBRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAHBRAM1ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AHBRAM1SO); +} + +/** + * @brief Disable the AHB RAM1 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM1SO LL_PWR_DisableAHBRAM1ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAHBRAM1ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AHBRAM1SO); +} + +/** + * @brief Check if the AHB RAM1 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AHBRAM1SO LL_PWR_IsEnabledAHBRAM1ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAHBRAM1ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AHBRAM1SO) == (PWR_CR1_AHBRAM1SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AHBRAM1SO */ + +#if defined (PWR_CR1_AHBRAM2SO) +/** + * @brief Enable the AHB RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM2SO LL_PWR_EnableAHBRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableAHBRAM2ShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_AHBRAM2SO); +} + +/** + * @brief Disable the AHB RAM2 shut-off in DStop/DStop2 mode + * @rmtoll CR1 AHBRAM2SO LL_PWR_DisableAHBRAM2ShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableAHBRAM2ShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_AHBRAM2SO); +} + +/** + * @brief Check if the AHB RAM2 shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 AHBRAM2SO LL_PWR_IsEnabledAHBRAM2ShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledAHBRAM2ShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_AHBRAM2SO) == (PWR_CR1_AHBRAM2SO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_AHBRAM2SO */ + +#if defined (PWR_CR1_ITCMSO) +/** + * @brief Enable the ITCM shut-off in DStop/DStop2 mode + * @rmtoll CR1 ITCMSO LL_PWR_EnableITCMSOShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableITCMSOShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_ITCMSO); +} + +/** + * @brief Disable the ITCM shut-off in DStop/DStop2 mode + * @rmtoll CR1 ITCMSO LL_PWR_DisableITCMSOShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableITCMSOShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_ITCMSO); +} + +/** + * @brief Check if the ITCM shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 ITCMSO LL_PWR_IsEnabledITCMShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledITCMShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_ITCMSO) == (PWR_CR1_ITCMSO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_ITCMSO */ + +#if defined (PWR_CR1_HSITFSO) +/** + * @brief Enable the USB and FDCAN shut-off in DStop/DStop2 mode + * @rmtoll CR1 HSITFSO LL_PWR_EnableHSITFShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableHSITFShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_HSITFSO); +} + +/** + * @brief Disable the USB and FDCAN shut-off in DStop/DStop2 mode + * @rmtoll CR1 HSITFSO LL_PWR_DisableHSITFShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableHSITFShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_HSITFSO); +} + +/** + * @brief Check if the USB and FDCAN shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 HSITFSO LL_PWR_IsEnabledHSITFShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledHSITFShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_HSITFSO) == (PWR_CR1_HSITFSO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_HSITFSO */ + +#if defined (PWR_CR1_SRDRAMSO) +/** + * @brief Enable the SRD AHB RAM shut-off in DStop/DStop2 mode + * @rmtoll CR1 SRDRAMSO LL_PWR_EnableSRDRAMShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSRDRAMShutOff(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_SRDRAMSO); +} + +/** + * @brief Disable the SRD AHB RAM shut-off in DStop/DStop2 mode + * @rmtoll CR1 SRDRAMSO LL_PWR_DisableSRDRAMShutOff + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSRDRAMShutOff(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_SRDRAMSO); +} + +/** + * @brief Check if the SRD AHB RAM shut-off in DStop/DStop2 mode is enabled + * @rmtoll CR1 SRDRAMSO LL_PWR_IsEnabledSRDRAMShutOff + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRDRAMShutOff(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_SRDRAMSO) == (PWR_CR1_SRDRAMSO)) ? 1UL : 0UL); +} +#endif /* PWR_CR1_SRDRAMSO */ + +/** + * @brief Enable Backup Regulator + * @rmtoll CR2 BREN LL_PWR_EnableBkUpRegulator + * @note When set, the Backup Regulator (used to maintain backup SRAM content in Standby and + * VBAT modes) is enabled. If BRE is reset, the backup Regulator is switched off. The backup + * SRAM can still be used but its content will be lost in the Standby and VBAT modes. Once set, + * the application must wait that the Backup Regulator Ready flag (BRR) is set to indicate that + * the data written into the RAM will be maintained in the Standby and VBAT modes. + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBkUpRegulator(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_BREN); +} + +/** + * @brief Disable Backup Regulator + * @rmtoll CR2 BREN LL_PWR_DisableBkUpRegulator + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBkUpRegulator(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_BREN); +} + +/** + * @brief Check if the backup Regulator is enabled + * @rmtoll CR2 BREN LL_PWR_IsEnabledBkUpRegulator + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpRegulator(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_BREN) == (PWR_CR2_BREN)) ? 1UL : 0UL); +} + +/** + * @brief Enable VBAT and Temperature monitoring + * @rmtoll CR2 MONEN LL_PWR_EnableMonitoring + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableMonitoring(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Disable VBAT and Temperature monitoring + * @rmtoll CR2 MONEN LL_PWR_DisableMonitoring + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableMonitoring(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Check if the VBAT and Temperature monitoring is enabled + * @rmtoll CR2 MONEN LL_PWR_IsEnabledMonitoring + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledMonitoring(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_MONEN) == (PWR_CR2_MONEN)) ? 1UL : 0UL); +} + +#if defined (SMPS) +/** + * @brief Configure the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_ConfigSupply + * @rmtoll CR3 LDOEN LL_PWR_ConfigSupply + * @rmtoll CR3 SMPSEN LL_PWR_ConfigSupply + * @rmtoll CR3 SMPSEXTHP LL_PWR_ConfigSupply + * @rmtoll CR3 SMPSLEVEL LL_PWR_ConfigSupply + * @param SupplySource This parameter can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_DIRECT_SMPS_SUPPLY + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + * @retval None + */ +__STATIC_INLINE void LL_PWR_ConfigSupply(uint32_t SupplySource) +{ + /* Set the power supply configuration */ + MODIFY_REG(PWR->CR3, (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS), SupplySource); +} +#else +/** + * @brief Configure the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_ConfigSupply + * @rmtoll CR3 LDOEN LL_PWR_ConfigSupply + * @rmtoll CR3 SCUEN LL_PWR_ConfigSupply + * @param SupplySource This parameter can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + * @retval None + */ +__STATIC_INLINE void LL_PWR_ConfigSupply(uint32_t SupplySource) +{ + /* Set the power supply configuration */ + MODIFY_REG(PWR->CR3, (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS), SupplySource); +} +#endif /* defined (SMPS) */ + +#if defined (SMPS) +/** + * @brief Get the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_GetSupply + * @rmtoll CR3 LDOEN LL_PWR_GetSupply + * @rmtoll CR3 SMPSEN LL_PWR_GetSupply + * @rmtoll CR3 SMPSEXTHP LL_PWR_GetSupply + * @rmtoll CR3 SMPSLEVEL LL_PWR_GetSupply + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_DIRECT_SMPS_SUPPLY + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO + * @arg @ref LL_PWR_SMPS_1V8_SUPPLIES_EXT + * @arg @ref LL_PWR_SMPS_2V5_SUPPLIES_EXT + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + */ +__STATIC_INLINE uint32_t LL_PWR_GetSupply(void) +{ + /* Get the power supply configuration */ + return(uint32_t)(READ_BIT(PWR->CR3, (PWR_CR3_SMPSLEVEL | PWR_CR3_SMPSEXTHP | PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS))); +} +#else +/** + * @brief Get the PWR supply + * @rmtoll CR3 BYPASS LL_PWR_GetSupply + * @rmtoll CR3 LDOEN LL_PWR_GetSupply + * @rmtoll CR3 SCUEN LL_PWR_GetSupply + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_LDO_SUPPLY + * @arg @ref LL_PWR_EXTERNAL_SOURCE_SUPPLY + */ +__STATIC_INLINE uint32_t LL_PWR_GetSupply(void) +{ + /* Get the power supply configuration */ + return(uint32_t)(READ_BIT(PWR->CR3, (PWR_CR3_SCUEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS))); +} +#endif /* defined (SMPS) */ + +/** + * @brief Enable battery charging + * @rmtoll CR3 VBE LL_PWR_EnableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_VBE); +} + +/** + * @brief Disable battery charging + * @rmtoll CR3 VBE LL_PWR_DisableBatteryCharging + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_VBE); +} + +/** + * @brief Check if battery charging is enabled + * @rmtoll CR3 VBE LL_PWR_IsEnabledBatteryCharging + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_VBE) == (PWR_CR3_VBE)) ? 1UL : 0UL); +} + +/** + * @brief Set the Battery charge resistor impedance + * @rmtoll CR3 VBRS LL_PWR_SetBattChargResistor + * @param Resistor This parameter can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor) +{ + MODIFY_REG(PWR->CR3, PWR_CR3_VBRS, Resistor); +} + +/** + * @brief Get the Battery charge resistor impedance + * @rmtoll CR3 VBRS LL_PWR_GetBattChargResistor + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K + * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K + */ +__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void) +{ + return (uint32_t)(READ_BIT(PWR->CR3, PWR_CR3_VBRS)); +} + +/** + * @brief Enable the USB regulator + * @rmtoll CR3 USBREGEN LL_PWR_EnableUSBReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBReg(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_USBREGEN); +} + +/** + * @brief Disable the USB regulator + * @rmtoll CR3 USBREGEN LL_PWR_DisableUSBReg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBReg(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_USBREGEN); +} + +/** + * @brief Check if the USB regulator is enabled + * @rmtoll CR3 USBREGEN LL_PWR_IsEnabledUSBReg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBReg(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_USBREGEN) == (PWR_CR3_USBREGEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable the USB voltage detector + * @rmtoll CR3 USB33DEN LL_PWR_EnableUSBVoltageDetector + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableUSBVoltageDetector(void) +{ + SET_BIT(PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Disable the USB voltage detector + * @rmtoll CR3 USB33DEN LL_PWR_DisableUSBVoltageDetector + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableUSBVoltageDetector(void) +{ + CLEAR_BIT(PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Check if the USB voltage detector is enabled + * @rmtoll CR3 USB33DEN LL_PWR_IsEnabledUSBVoltageDetector + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledUSBVoltageDetector(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_USB33DEN) == (PWR_CR3_USB33DEN)) ? 1UL : 0UL); +} + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Set the D1 domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D1 LL_PWR_CPU_SetD1PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D1STOP + * @arg @ref LL_PWR_CPU_MODE_D1STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetD1PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_D1, PDMode); +} +#else +/** + * @brief Set the CPU domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR RETDS_CD LL_PWR_CPU_SetCDPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_CDSTOP + * @arg @ref LL_PWR_CPU_MODE_CDSTOP2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetCDPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_RETDS_CD, PDMode); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Set the D1 domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D1 LL_PWR_CPU2_SetD1PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D1STOP + * @arg @ref LL_PWR_CPU2_MODE_D1STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_SetD1PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPU2CR, PWR_CPU2CR_PDDS_D1, PDMode); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Get the D1 Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D1 LL_PWR_CPU_GetD1PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D1STOP + * @arg @ref LL_PWR_CPU_MODE_D1STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetD1PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_D1)); +} +#else +/** + * @brief Get the CD Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR RETDS_CD LL_PWR_CPU_GetCDPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_CDSTOP + * @arg @ref LL_PWR_CPU_MODE_CDSTOP2 + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetCDPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_RETDS_CD)); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get the D1 Domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D1 LL_PWR_CPU2_GetD1PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D1STOP + * @arg @ref LL_PWR_CPU2_MODE_D1STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_GetD1PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPU2CR, PWR_CPU2CR_PDDS_D1)); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Set the D2 domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D2 LL_PWR_CPU_SetD2PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D2STOP + * @arg @ref LL_PWR_CPU_MODE_D2STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetD2PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_D2, PDMode); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Set the D2 domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D2 LL_PWR_CPU2_SetD2PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D2STOP + * @arg @ref LL_PWR_CPU2_MODE_D2STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_SetD2PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPU2CR, PWR_CPU2CR_PDDS_D2, PDMode); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Get the D2 Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D2 LL_PWR_CPU_GetD2PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D2STOP + * @arg @ref LL_PWR_CPU_MODE_D2STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetD2PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_D2)); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get the D2 Domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D2 LL_PWR_CPU2_GetD2PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D2STOP + * @arg @ref LL_PWR_CPU2_MODE_D2STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_GetD2PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPU2CR, PWR_CPU2CR_PDDS_D2)); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Set the D3 domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D3 LL_PWR_CPU_SetD3PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D3STOP + * @arg @ref LL_PWR_CPU_MODE_D3STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetD3PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_D3 , PDMode); +} +#else +/** + * @brief Set the SRD domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_SRD LL_PWR_CPU_SetSRDPowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_SRDSTOP + * @arg @ref LL_PWR_CPU_MODE_SRDSTANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_SetSRDPowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPUCR, PWR_CPUCR_PDDS_SRD , PDMode); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Set the D3 domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D3 LL_PWR_CPU2_SetD3PowerMode + * @param PDMode This parameter can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D3STOP + * @arg @ref LL_PWR_CPU2_MODE_D3STANDBY + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_SetD3PowerMode(uint32_t PDMode) +{ + MODIFY_REG(PWR->CPU2CR, PWR_CPU2CR_PDDS_D3, PDMode); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Get the D3 Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_D3 LL_PWR_CPU_GetD3PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_D3STOP + * @arg @ref LL_PWR_CPU_MODE_D3STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetD3PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_D3)); +} +#else +/** + * @brief Get the SRD Domain Power Down mode when the CPU enters deepsleep + * @rmtoll CPUCR PDDS_SRD LL_PWR_CPU_GetSRDPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU_MODE_SRDSTOP + * @arg @ref LL_PWR_CPU_MODE_SRDSTANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_GetSRDPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPUCR, PWR_CPUCR_PDDS_SRD)); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get the D3 Domain Power Down mode when the CPU2 enters deepsleep + * @rmtoll CPU2CR PDDS_D3 LL_PWR_CPU2_GetD3PowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_CPU2_MODE_D3STOP + * @arg @ref LL_PWR_CPU2_MODE_D3STANDBY + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_GetD3PowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CPU2CR, PWR_CPU2CR_PDDS_D3)); +} +#endif /* DUAL_CORE */ + +#if defined (DUAL_CORE) +/** + * @brief Hold the CPU1 and allocated peripherals when exiting from STOP mode + * @rmtoll CPU2CR HOLD1 LL_PWR_HoldCPU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_HoldCPU1(void) +{ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1); +} + +/** + * @brief Release the CPU1 and allocated peripherals + * @rmtoll CPU2CR HOLD1 LL_PWR_ReleaseCPU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ReleaseCPU1(void) +{ + CLEAR_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1); +} + +/** + * @brief Ckeck if the CPU1 and allocated peripherals are held + * @rmtoll CPU2CR HOLD1 LL_PWR_IsCPU1Held + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsCPU1Held(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1) == (PWR_CPU2CR_HOLD1)) ? 1UL : 0UL); +} + +/** + * @brief Hold the CPU2 and allocated peripherals when exiting from STOP mode + * @rmtoll CPUCR HOLD2 LL_PWR_HoldCPU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_HoldCPU2(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2); +} + +/** + * @brief Release the CPU2 and allocated peripherals + * @rmtoll CPUCR HOLD2 LL_PWR_ReleaseCPU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ReleaseCPU2(void) +{ + CLEAR_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2); +} + +/** + * @brief Ckeck if the CPU2 and allocated peripherals are held + * @rmtoll CPUCR HOLD2 LL_PWR_IsCPU2Held + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsCPU2Held(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2) == (PWR_CPUCR_HOLD2)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief D3 domain remains in Run mode regardless of CPU subsystem modes + * @rmtoll CPUCR RUN_D3 LL_PWR_CPU_EnableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_EnableD3RunInLowPowerMode(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_RUN_D3); +} +#else +/** + * @brief SRD domain remains in Run mode regardless of CPU subsystem modes + * @rmtoll CPUCR RUN_SRD LL_PWR_CPU_EnableSRDRunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_EnableSRDRunInLowPowerMode(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_RUN_SRD); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief D3 domain remains in Run mode regardless of CPU2 subsystem modes + * @rmtoll CPU2CR RUN_D3 LL_PWR_CPU2_EnableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_EnableD3RunInLowPowerMode(void) +{ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_RUN_D3); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief D3 domain follows CPU subsystem modes + * @rmtoll CPUCR RUN_D3 LL_PWR_CPU_DisableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_DisableD3RunInLowPowerMode(void) +{ + CLEAR_BIT(PWR->CPUCR, PWR_CPUCR_RUN_D3); +} +#else +/** + * @brief SRD domain follows CPU subsystem modes + * @rmtoll CPUCR RUN_SRD LL_PWR_CPU_DisableSRDRunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU_DisableSRDRunInLowPowerMode(void) +{ + CLEAR_BIT(PWR->CPUCR, PWR_CPUCR_RUN_SRD); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief D3 domain follows CPU2 subsystem modes + * @rmtoll CPU2CR RUN_D3 LL_PWR_CPU2_DisableD3RunInLowPowerMode + * @retval None + */ +__STATIC_INLINE void LL_PWR_CPU2_DisableD3RunInLowPowerMode(void) +{ + CLEAR_BIT(PWR->CPU2CR, PWR_CPU2CR_RUN_D3); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_PDDS_D2) +/** + * @brief Check if D3 is kept in Run mode when CPU enters low power mode + * @rmtoll CPUCR RUN_D3 LL_PWR_CPU_IsEnabledD3RunInLowPowerMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsEnabledD3RunInLowPowerMode(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_RUN_D3) == (PWR_CPUCR_RUN_D3)) ? 1UL : 0UL); +} +#else +/** + * @brief Check if SRD is kept in Run mode when CPU enters low power mode + * @rmtoll CPUCR RUN_SRD LL_PWR_CPU_IsEnabledSRDRunInLowPowerMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsEnabledSRDRunInLowPowerMode(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_RUN_SRD) == (PWR_CPUCR_RUN_SRD)) ? 1UL : 0UL); +} +#endif /* PWR_CPUCR_PDDS_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Check if D3 is kept in Run mode when CPU2 enters low power mode + * @rmtoll CPU2CR RUN_D3 LL_PWR_CPU2_IsEnabledD3RunInLowPowerMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsEnabledD3RunInLowPowerMode(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_RUN_D3) == (PWR_CPU2CR_RUN_D3)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Set the main internal Regulator output voltage + * @rmtoll D3CR VOS LL_PWR_SetRegulVoltageScaling + * @param VoltageScaling This parameter can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE0 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + * @note For all H7 lines except STM32H7Axxx and STM32H7Bxxx lines, VOS0 + * is applied when PWR_D3CR_VOS[1:0] = 0b11 and SYSCFG_PWRCR_ODEN = 0b1. + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling) +{ +#if defined (PWR_CPUCR_PDDS_D2) + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, VoltageScaling); +#else + MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, VoltageScaling); +#endif /* PWR_CPUCR_PDDS_D2 */ +} + +/** + * @brief Get the main internal Regulator output voltage + * @rmtoll D3CR VOS LL_PWR_GetRegulVoltageScaling + * @note For all H7 lines except STM32H7Axxx and STM32H7Bxxx lines, checking + * VOS0 need the check of PWR_D3CR_VOS[1:0] field and SYSCFG_PWRCR_ODEN bit. + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE0 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2 + * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE3 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void) +{ +#if defined (PWR_CPUCR_PDDS_D2) + return (uint32_t)(READ_BIT(PWR->D3CR, PWR_D3CR_VOS)); +#else + return (uint32_t)(READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS)); +#endif /* PWR_CPUCR_PDDS_D2 */ +} + +/** + * @brief Enable the WakeUp PINx functionality + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN5 LL_PWR_EnableWakeUpPin\n + * WKUPEPR WKUPEN6 LL_PWR_EnableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin) +{ + SET_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Disable the WakeUp PINx functionality + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN5 LL_PWR_DisableWakeUpPin\n + * WKUPEPR WKUPEN6 LL_PWR_DisableWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll WKUPEPR WKUPEN1 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN2 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN3 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN4 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN5 LL_PWR_IsEnabledWakeUpPin\n + * WKUPEPR WKUPEN6 LL_PWR_IsEnabledWakeUpPin + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->WKUPEPR, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP2 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP3 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP4 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP5 LL_PWR_SetWakeUpPinPolarityLow\n + * WKUPEPR WKUPP6 LL_PWR_SetWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + SET_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)); +} + +/** + * @brief Set the Wake-Up pin polarity high for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP2 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP3 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP4 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP5 LL_PWR_SetWakeUpPinPolarityHigh\n + * WKUPEPR WKUPP6 LL_PWR_SetWakeUpPinPolarityHigh + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin) +{ + CLEAR_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)); +} + +/** + * @brief Get the Wake-Up pin polarity for the event detection + * @rmtoll WKUPEPR WKUPP1 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP2 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP3 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP4 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP5 LL_PWR_IsWakeUpPinPolarityLow\n + * WKUPEPR WKUPP6 LL_PWR_IsWakeUpPinPolarityLow + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin) +{ + return ((READ_BIT(PWR->WKUPEPR, (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)) == (WakeUpPin << PWR_WKUPEPR_WKUPP1_Pos)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wake-Up pin Pull None + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD5 LL_PWR_SetWakeUpPinPullNone\n + * WKUPEPR WKUPPUPD6 LL_PWR_SetWakeUpPinPullNone + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullNone(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_NOPULL << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Set the Wake-Up pin Pull Up + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD5 LL_PWR_SetWakeUpPinPullUp\n + * WKUPEPR WKUPPUPD6 LL_PWR_SetWakeUpPinPullUp + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullUp(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_PULLUP << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Set the Wake-Up pin Pull Down + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD2 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD3 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD4 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD5 LL_PWR_SetWakeUpPinPullDown\n + * WKUPEPR WKUPPUPD6 LL_PWR_SetWakeUpPinPullDown + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPullDown(uint32_t WakeUpPin) +{ + MODIFY_REG(PWR->WKUPEPR, \ + (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)), \ + (LL_PWR_WAKEUP_PIN_PULLDOWN << ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); +} + +/** + * @brief Get the Wake-Up pin pull + * @rmtoll WKUPEPR WKUPPUPD1 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD2 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD3 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD4 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD5 LL_PWR_GetWakeUpPinPull\n + * WKUPEPR WKUPPUPD6 LL_PWR_GetWakeUpPinPull + * @param WakeUpPin This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 (*) + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 (*) + * @arg @ref LL_PWR_WAKEUP_PIN6 + * + * (*) value not defined in all devices. + * + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN_NOPULL + * @arg @ref LL_PWR_WAKEUP_PIN_PULLUP + * @arg @ref LL_PWR_WAKEUP_PIN_PULLDOWN + */ +__STATIC_INLINE uint32_t LL_PWR_GetWakeUpPinPull(uint32_t WakeUpPin) +{ + uint32_t regValue = READ_BIT(PWR->WKUPEPR, (PWR_WKUPEPR_WKUPPUPD1 << ((LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin)) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK))); + + return (uint32_t)(regValue >> ((PWR_WKUPEPR_WKUPPUPD1_Pos + (LL_PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET * POSITION_VAL(WakeUpPin))) & LL_PWR_WAKEUP_PINS_MAX_SHIFT_MASK)); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Indicate whether VDD voltage is below the selected PVD threshold + * @rmtoll CSR1 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_PVDO) == (PWR_CSR1_PVDO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the voltage level is ready for current actual used VOS + * @rmtoll CSR1 ACTVOSRDY LL_PWR_IsActiveFlag_ACTVOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_ACTVOS(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_ACTVOSRDY) == (PWR_CSR1_ACTVOSRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether VDDA voltage is below the selected AVD threshold + * @rmtoll CSR1 AVDO LL_PWR_IsActiveFlag_AVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_AVDO(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_AVDO) == (PWR_CSR1_AVDO)) ? 1UL : 0UL); +} + +#if defined (PWR_CSR1_MMCVDO) +/** + * @brief Indicate whether VDDMMC voltage is below 1V2 + * @rmtoll CSR1 MMCVDO LL_PWR_IsActiveFlag_MMCVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_MMCVDO(void) +{ + return ((READ_BIT(PWR->CSR1, PWR_CSR1_MMCVDO) == (PWR_CSR1_MMCVDO)) ? 1UL : 0UL); +} +#endif /* PWR_CSR1_MMCVDO */ + +/** + * @brief Get Backup Regulator ready Flag + * @rmtoll CR2 BRRDY LL_PWR_IsActiveFlag_BRR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_BRR(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_BRRDY) == (PWR_CR2_BRRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the VBAT level is above or below low threshold + * @rmtoll CR2 VBATL LL_PWR_IsActiveFlag_VBATL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VBATL(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_VBATL) == (PWR_CR2_VBATL)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the VBAT level is above or below high threshold + * @rmtoll CR2 VBATH LL_PWR_IsActiveFlag_VBATH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VBATH(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_VBATH) == (PWR_CR2_VBATH)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the CPU temperature level is above or below low threshold + * @rmtoll CR2 TEMPL LL_PWR_IsActiveFlag_TEMPL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_TEMPL(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_TEMPL) == (PWR_CR2_TEMPL)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether the CPU temperature level is above or below high threshold + * @rmtoll CR2 TEMPH LL_PWR_IsActiveFlag_TEMPH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_TEMPH(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_TEMPH) == (PWR_CR2_TEMPH)) ? 1UL : 0UL); +} + +#if defined (SMPS) +/** + * @brief Indicate whether the SMPS external supply is ready or not + * @rmtoll CR3 SMPSEXTRDY LL_PWR_IsActiveFlag_SMPSEXT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SMPSEXT(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_SMPSEXTRDY) == (PWR_CR3_SMPSEXTRDY)) ? 1UL : 0UL); +} +#endif /* SMPS */ + +/** + * @brief Indicate whether the USB supply is ready or not + * @rmtoll CR3 USBRDY LL_PWR_IsActiveFlag_USB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_USB(void) +{ + return ((READ_BIT(PWR->CR3, PWR_CR3_USB33RDY) == (PWR_CR3_USB33RDY)) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Get HOLD2 Flag + * @rmtoll CPUCR HOLD2F LL_PWR_IsActiveFlag_HOLD2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_HOLD2(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_HOLD2F) == (PWR_CPUCR_HOLD2F)) ? 1UL : 0UL); +} + +/** + * @brief Get HOLD1 Flag + * @rmtoll CPU2CR HOLD1F LL_PWR_IsActiveFlag_HOLD1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_HOLD1(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_HOLD1F) == (PWR_CPU2CR_HOLD1F)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Get CPU System Stop Flag + * @rmtoll CPUCR STOPF LL_PWR_CPU_IsActiveFlag_STOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_STOP(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_STOPF) == (PWR_CPUCR_STOPF)) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 System Stop Flag + * @rmtoll CPU2CR STOPF LL_PWR_CPU2_IsActiveFlag_STOP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_STOP(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_STOPF) == (PWR_CPU2CR_STOPF)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Get CPU System Standby Flag + * @rmtoll CPUCR SBF LL_PWR_CPU_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_SBF) == (PWR_CPUCR_SBF)) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 System Standby Flag + * @rmtoll CPU2CR SBF LL_PWR_CPU2_IsActiveFlag_SB + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_SB(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_SBF) == (PWR_CPU2CR_SBF)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_SBF_D1) +/** + * @brief Get CPU D1 Domain Standby Flag + * @rmtoll CPUCR SBF_D1 LL_PWR_CPU_IsActiveFlag_SB_D1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_SB_D1(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_SBF_D1) == (PWR_CPUCR_SBF_D1)) ? 1UL : 0UL); +} +#endif /* PWR_CPUCR_SBF_D1 */ + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 D1 Domain Standby Flag + * @rmtoll CPU2CR SBF_D1 LL_PWR_CPU2_IsActiveFlag_SB_D1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_SB_D1(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_SBF_D1) == (PWR_CPU2CR_SBF_D1)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +#if defined (PWR_CPUCR_SBF_D2) +/** + * @brief Get CPU D2 Domain Standby Flag + * @rmtoll CPUCR SBF_D2 LL_PWR_CPU_IsActiveFlag_SB_D2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU_IsActiveFlag_SB_D2(void) +{ + return ((READ_BIT(PWR->CPUCR, PWR_CPUCR_SBF_D2) == (PWR_CPUCR_SBF_D2)) ? 1UL : 0UL); +} +#endif /* PWR_CPUCR_SBF_D2 */ + +#if defined (DUAL_CORE) +/** + * @brief Get CPU2 D2 Domain Standby Flag + * @rmtoll CPU2CR SBF_D2 LL_PWR_CPU2_IsActiveFlag_SB_D2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_CPU2_IsActiveFlag_SB_D2(void) +{ + return ((READ_BIT(PWR->CPU2CR, PWR_CPU2CR_SBF_D2) == (PWR_CPU2CR_SBF_D2)) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + + +/** + * @brief Indicate whether the Regulator is ready in the selected voltage range + * or if its output voltage is still changing to the required voltage level + * @rmtoll D3CR VOSRDY LL_PWR_IsActiveFlag_VOS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void) +{ +#if defined (PWR_CPUCR_PDDS_D2) + return ((READ_BIT(PWR->D3CR, PWR_D3CR_VOSRDY) == (PWR_D3CR_VOSRDY)) ? 1UL : 0UL); +#else + return ((READ_BIT(PWR->SRDCR, PWR_SRDCR_VOSRDY) == (PWR_SRDCR_VOSRDY)) ? 1UL : 0UL); +#endif /* PWR_CPUCR_PDDS_D2 */ +} + +/** + * @brief Get Wake-up Flag 6 + * @rmtoll WKUPFR WKUPF6 LL_PWR_IsActiveFlag_WU6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF6) == (PWR_WKUPFR_WKUPF6)) ? 1UL : 0UL); +} + +#if defined (PWR_WKUPFR_WKUPF5) +/** + * @brief Get Wake-up Flag 5 + * @rmtoll WKUPFR WKUPF5 LL_PWR_IsActiveFlag_WU5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF5) == (PWR_WKUPFR_WKUPF5)) ? 1UL : 0UL); +} +#endif /* defined (PWR_WKUPFR_WKUPF5) */ + +/** + * @brief Get Wake-up Flag 4 + * @rmtoll WKUPFR WKUPF4 LL_PWR_IsActiveFlag_WU4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF4) == (PWR_WKUPFR_WKUPF4)) ? 1UL : 0UL); +} + +#if defined (PWR_WKUPFR_WKUPF3) +/** + * @brief Get Wake-up Flag 3 + * @rmtoll WKUPFR WKUPF3 LL_PWR_IsActiveFlag_WU3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF3) == (PWR_WKUPFR_WKUPF3)) ? 1UL : 0UL); +} +#endif /* defined (PWR_WKUPFR_WKUPF3) */ + +/** + * @brief Get Wake-up Flag 2 + * @rmtoll WKUPFR WKUPF2 LL_PWR_IsActiveFlag_WU2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF2) == (PWR_WKUPFR_WKUPF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Wake-up Flag 1 + * @rmtoll WKUPFR WKUPF1 LL_PWR_IsActiveFlag_WU1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void) +{ + return ((READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) == (PWR_WKUPFR_WKUPF1)) ? 1UL : 0UL); +} + +/** + * @brief Clear CPU STANDBY, STOP and HOLD flags + * @rmtoll CPUCR CSSF LL_PWR_ClearFlag_CPU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_CPU(void) +{ + SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); +} + +#if defined (DUAL_CORE) +/** + * @brief Clear CPU2 STANDBY, STOP and HOLD flags + * @rmtoll CPU2CR CSSF LL_PWR_ClearFlag_CPU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_CPU2(void) +{ + SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); +} +#endif /* DUAL_CORE */ + +/** + * @brief Clear Wake-up Flag 6 + * @rmtoll WKUPCR WKUPC6 LL_PWR_ClearFlag_WU6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC6); +} + +#if defined (PWR_WKUPCR_WKUPC5) +/** + * @brief Clear Wake-up Flag 5 + * @rmtoll WKUPCR WKUPC5 LL_PWR_ClearFlag_WU5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC5); +} +#endif /* defined (PWR_WKUPCR_WKUPC5) */ + +/** + * @brief Clear Wake-up Flag 4 + * @rmtoll WKUPCR WKUPC4 LL_PWR_ClearFlag_WU4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC4); +} + +#if defined (PWR_WKUPCR_WKUPC3) +/** + * @brief Clear Wake-up Flag 3 + * @rmtoll WKUPCR WKUPC3 LL_PWR_ClearFlag_WU3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC3); +} +#endif /* defined (PWR_WKUPCR_WKUPC3) */ + +/** + * @brief Clear Wake-up Flag 2 + * @rmtoll WKUPCR WKUPC2 LL_PWR_ClearFlag_WU2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC2); +} + +/** + * @brief Clear Wake-up Flag 1 + * @rmtoll WKUPCR WKUPC1 LL_PWR_ClearFlag_WU1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void) +{ + WRITE_REG(PWR->WKUPCR, PWR_WKUPCR_WKUPC1); +} + +#if defined (USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* defined (USE_FULL_LL_DRIVER) */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_PWR_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h new file mode 100644 index 0000000..bd700dc --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_rcc.h @@ -0,0 +1,6404 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_RCC_H +#define STM32H7xx_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ +extern const uint8_t LL_RCC_PrescTable[16]; + +/** + * @} + */ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +#if !defined(UNUSED) +#define UNUSED(x) ((void)(x)) +#endif + +/* 32 24 16 8 0 + -------------------------------------------------------- + | Mask | ClkSource | Bit | Register | + | | Config | Position | Offset | + --------------------------------------------------------*/ + +#if defined(RCC_VER_2_0) +/* Clock source register offset Vs CDCCIPR register */ +#define CDCCIP 0x0UL +#define CDCCIP1 0x4UL +#define CDCCIP2 0x8UL +#define SRDCCIP 0xCUL +#else +/* Clock source register offset Vs D1CCIPR register */ +#define D1CCIP 0x0UL +#define D2CCIP1 0x4UL +#define D2CCIP2 0x8UL +#define D3CCIP 0xCUL +#endif /* RCC_VER_2_0 */ + +#define LL_RCC_REG_SHIFT 0U +#define LL_RCC_POS_SHIFT 8U +#define LL_RCC_CONFIG_SHIFT 16U +#define LL_RCC_MASK_SHIFT 24U + +#define LL_CLKSOURCE_SHIFT(__CLKSOURCE__) (((__CLKSOURCE__) >> LL_RCC_POS_SHIFT ) & 0x1FUL) + +#define LL_CLKSOURCE_MASK(__CLKSOURCE__) ((((__CLKSOURCE__) >> LL_RCC_MASK_SHIFT ) & 0xFFUL) << LL_CLKSOURCE_SHIFT(__CLKSOURCE__)) + +#define LL_CLKSOURCE_CONFIG(__CLKSOURCE__) ((((__CLKSOURCE__) >> LL_RCC_CONFIG_SHIFT) & 0xFFUL) << LL_CLKSOURCE_SHIFT(__CLKSOURCE__)) + +#define LL_CLKSOURCE_REG(__CLKSOURCE__) (((__CLKSOURCE__) >> LL_RCC_REG_SHIFT ) & 0xFFUL) + +#define LL_CLKSOURCE(__REG__, __MSK__, __POS__, __CLK__) ((uint32_t)((((__MSK__) >> (__POS__)) << LL_RCC_MASK_SHIFT) | \ + (( __POS__ ) << LL_RCC_POS_SHIFT) | \ + (( __REG__ ) << LL_RCC_REG_SHIFT) | \ + (((__CLK__) >> (__POS__)) << LL_RCC_CONFIG_SHIFT))) +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; + uint32_t CPUCLK_Frequency; + uint32_t HCLK_Frequency; + uint32_t PCLK1_Frequency; + uint32_t PCLK2_Frequency; + uint32_t PCLK3_Frequency; + uint32_t PCLK4_Frequency; +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @brief PLL Clocks Frequency Structure + */ +typedef struct +{ + uint32_t PLL_P_Frequency; + uint32_t PLL_Q_Frequency; + uint32_t PLL_R_Frequency; +} LL_PLL_ClocksTypeDef; + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#if defined(RCC_VER_X) || defined(RCC_VER_3_0) +#define HSE_VALUE 25000000U /*!< Value of the HSE oscillator in Hz */ +#else +#define HSE_VALUE 24000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* RCC_VER_X || RCC_VER_3_0 */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (CSI_VALUE) +#define CSI_VALUE 4000000U /*!< Value of the CSI oscillator in Hz */ +#endif /* CSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ + +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the I2S_CKIN external oscillator in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +#if !defined (HSI48_VALUE) +#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */ +#endif /* HSI48_VALUE */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSIDIV HSI oscillator divider + * @{ + */ +#define LL_RCC_HSI_DIV1 RCC_CR_HSIDIV_1 +#define LL_RCC_HSI_DIV2 RCC_CR_HSIDIV_2 +#define LL_RCC_HSI_DIV4 RCC_CR_HSIDIV_4 +#define LL_RCC_HSI_DIV8 RCC_CR_HSIDIV_8 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW (uint32_t)(0x00000000U) +#define LL_RCC_LSEDRIVE_MEDIUMLOW (uint32_t)(RCC_BDCR_LSEDRV_0) +#define LL_RCC_LSEDRIVE_MEDIUMHIGH (uint32_t)(RCC_BDCR_LSEDRV_1) +#define LL_RCC_LSEDRIVE_HIGH (uint32_t)(RCC_BDCR_LSEDRV) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI +#define LL_RCC_SYS_CLKSOURCE_CSI RCC_CFGR_SW_CSI +#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE +#define LL_RCC_SYS_CLKSOURCE_PLL1 RCC_CFGR_SW_PLL1 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status + * @{ + */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_CSI RCC_CFGR_SWS_CSI /*!< CSI used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ +#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL1 RCC_CFGR_SWS_PLL1 /*!< PLL1 used as system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSWAKEUP_CLKSOURCE System wakeup clock source + * @{ + */ +#define LL_RCC_SYSWAKEUP_CLKSOURCE_HSI (uint32_t)(0x00000000U) +#define LL_RCC_SYSWAKEUP_CLKSOURCE_CSI (uint32_t)(RCC_CFGR_STOPWUCK) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_KERWAKEUP_CLKSOURCE Kernel wakeup clock source + * @{ + */ +#define LL_RCC_KERWAKEUP_CLKSOURCE_HSI (uint32_t)(0x00000000U) +#define LL_RCC_KERWAKEUP_CLKSOURCE_CSI (uint32_t)(RCC_CFGR_STOPKERWUCK) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV System prescaler + * @{ + */ +#if defined(RCC_D1CFGR_D1CPRE_DIV1) +#define LL_RCC_SYSCLK_DIV_1 RCC_D1CFGR_D1CPRE_DIV1 +#define LL_RCC_SYSCLK_DIV_2 RCC_D1CFGR_D1CPRE_DIV2 +#define LL_RCC_SYSCLK_DIV_4 RCC_D1CFGR_D1CPRE_DIV4 +#define LL_RCC_SYSCLK_DIV_8 RCC_D1CFGR_D1CPRE_DIV8 +#define LL_RCC_SYSCLK_DIV_16 RCC_D1CFGR_D1CPRE_DIV16 +#define LL_RCC_SYSCLK_DIV_64 RCC_D1CFGR_D1CPRE_DIV64 +#define LL_RCC_SYSCLK_DIV_128 RCC_D1CFGR_D1CPRE_DIV128 +#define LL_RCC_SYSCLK_DIV_256 RCC_D1CFGR_D1CPRE_DIV256 +#define LL_RCC_SYSCLK_DIV_512 RCC_D1CFGR_D1CPRE_DIV512 +#else +#define LL_RCC_SYSCLK_DIV_1 RCC_CDCFGR1_CDCPRE_DIV1 +#define LL_RCC_SYSCLK_DIV_2 RCC_CDCFGR1_CDCPRE_DIV2 +#define LL_RCC_SYSCLK_DIV_4 RCC_CDCFGR1_CDCPRE_DIV4 +#define LL_RCC_SYSCLK_DIV_8 RCC_CDCFGR1_CDCPRE_DIV8 +#define LL_RCC_SYSCLK_DIV_16 RCC_CDCFGR1_CDCPRE_DIV16 +#define LL_RCC_SYSCLK_DIV_64 RCC_CDCFGR1_CDCPRE_DIV64 +#define LL_RCC_SYSCLK_DIV_128 RCC_CDCFGR1_CDCPRE_DIV128 +#define LL_RCC_SYSCLK_DIV_256 RCC_CDCFGR1_CDCPRE_DIV256 +#define LL_RCC_SYSCLK_DIV_512 RCC_CDCFGR1_CDCPRE_DIV512 +#endif /* RCC_D1CFGR_D1CPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_AHB_DIV AHB prescaler + * @{ + */ +#if defined(RCC_D1CFGR_HPRE_DIV1) +#define LL_RCC_AHB_DIV_1 RCC_D1CFGR_HPRE_DIV1 +#define LL_RCC_AHB_DIV_2 RCC_D1CFGR_HPRE_DIV2 +#define LL_RCC_AHB_DIV_4 RCC_D1CFGR_HPRE_DIV4 +#define LL_RCC_AHB_DIV_8 RCC_D1CFGR_HPRE_DIV8 +#define LL_RCC_AHB_DIV_16 RCC_D1CFGR_HPRE_DIV16 +#define LL_RCC_AHB_DIV_64 RCC_D1CFGR_HPRE_DIV64 +#define LL_RCC_AHB_DIV_128 RCC_D1CFGR_HPRE_DIV128 +#define LL_RCC_AHB_DIV_256 RCC_D1CFGR_HPRE_DIV256 +#define LL_RCC_AHB_DIV_512 RCC_D1CFGR_HPRE_DIV512 +#else +#define LL_RCC_AHB_DIV_1 RCC_CDCFGR1_HPRE_DIV1 +#define LL_RCC_AHB_DIV_2 RCC_CDCFGR1_HPRE_DIV2 +#define LL_RCC_AHB_DIV_4 RCC_CDCFGR1_HPRE_DIV4 +#define LL_RCC_AHB_DIV_8 RCC_CDCFGR1_HPRE_DIV8 +#define LL_RCC_AHB_DIV_16 RCC_CDCFGR1_HPRE_DIV16 +#define LL_RCC_AHB_DIV_64 RCC_CDCFGR1_HPRE_DIV64 +#define LL_RCC_AHB_DIV_128 RCC_CDCFGR1_HPRE_DIV128 +#define LL_RCC_AHB_DIV_256 RCC_CDCFGR1_HPRE_DIV256 +#define LL_RCC_AHB_DIV_512 RCC_CDCFGR1_HPRE_DIV512 +#endif /* RCC_D1CFGR_HPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1) + * @{ + */ +#if defined(RCC_D2CFGR_D2PPRE1_DIV1) +#define LL_RCC_APB1_DIV_1 RCC_D2CFGR_D2PPRE1_DIV1 +#define LL_RCC_APB1_DIV_2 RCC_D2CFGR_D2PPRE1_DIV2 +#define LL_RCC_APB1_DIV_4 RCC_D2CFGR_D2PPRE1_DIV4 +#define LL_RCC_APB1_DIV_8 RCC_D2CFGR_D2PPRE1_DIV8 +#define LL_RCC_APB1_DIV_16 RCC_D2CFGR_D2PPRE1_DIV16 +#else +#define LL_RCC_APB1_DIV_1 RCC_CDCFGR2_CDPPRE1_DIV1 +#define LL_RCC_APB1_DIV_2 RCC_CDCFGR2_CDPPRE1_DIV2 +#define LL_RCC_APB1_DIV_4 RCC_CDCFGR2_CDPPRE1_DIV4 +#define LL_RCC_APB1_DIV_8 RCC_CDCFGR2_CDPPRE1_DIV8 +#define LL_RCC_APB1_DIV_16 RCC_CDCFGR2_CDPPRE1_DIV16 +#endif /* RCC_D2CFGR_D2PPRE1_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB2_DIV APB low-speed prescaler (APB2) + * @{ + */ +#if defined(RCC_D2CFGR_D2PPRE2_DIV1) +#define LL_RCC_APB2_DIV_1 RCC_D2CFGR_D2PPRE2_DIV1 +#define LL_RCC_APB2_DIV_2 RCC_D2CFGR_D2PPRE2_DIV2 +#define LL_RCC_APB2_DIV_4 RCC_D2CFGR_D2PPRE2_DIV4 +#define LL_RCC_APB2_DIV_8 RCC_D2CFGR_D2PPRE2_DIV8 +#define LL_RCC_APB2_DIV_16 RCC_D2CFGR_D2PPRE2_DIV16 +#else +#define LL_RCC_APB2_DIV_1 RCC_CDCFGR2_CDPPRE2_DIV1 +#define LL_RCC_APB2_DIV_2 RCC_CDCFGR2_CDPPRE2_DIV2 +#define LL_RCC_APB2_DIV_4 RCC_CDCFGR2_CDPPRE2_DIV4 +#define LL_RCC_APB2_DIV_8 RCC_CDCFGR2_CDPPRE2_DIV8 +#define LL_RCC_APB2_DIV_16 RCC_CDCFGR2_CDPPRE2_DIV16 +#endif /* RCC_D2CFGR_D2PPRE2_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB3_DIV APB low-speed prescaler (APB3) + * @{ + */ +#if defined(RCC_D1CFGR_D1PPRE_DIV1) +#define LL_RCC_APB3_DIV_1 RCC_D1CFGR_D1PPRE_DIV1 +#define LL_RCC_APB3_DIV_2 RCC_D1CFGR_D1PPRE_DIV2 +#define LL_RCC_APB3_DIV_4 RCC_D1CFGR_D1PPRE_DIV4 +#define LL_RCC_APB3_DIV_8 RCC_D1CFGR_D1PPRE_DIV8 +#define LL_RCC_APB3_DIV_16 RCC_D1CFGR_D1PPRE_DIV16 +#else +#define LL_RCC_APB3_DIV_1 RCC_CDCFGR1_CDPPRE_DIV1 +#define LL_RCC_APB3_DIV_2 RCC_CDCFGR1_CDPPRE_DIV2 +#define LL_RCC_APB3_DIV_4 RCC_CDCFGR1_CDPPRE_DIV4 +#define LL_RCC_APB3_DIV_8 RCC_CDCFGR1_CDPPRE_DIV8 +#define LL_RCC_APB3_DIV_16 RCC_CDCFGR1_CDPPRE_DIV16 +#endif /* RCC_D1CFGR_D1PPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_APB4_DIV APB low-speed prescaler (APB4) + * @{ + */ +#if defined(RCC_D3CFGR_D3PPRE_DIV1) +#define LL_RCC_APB4_DIV_1 RCC_D3CFGR_D3PPRE_DIV1 +#define LL_RCC_APB4_DIV_2 RCC_D3CFGR_D3PPRE_DIV2 +#define LL_RCC_APB4_DIV_4 RCC_D3CFGR_D3PPRE_DIV4 +#define LL_RCC_APB4_DIV_8 RCC_D3CFGR_D3PPRE_DIV8 +#define LL_RCC_APB4_DIV_16 RCC_D3CFGR_D3PPRE_DIV16 +#else +#define LL_RCC_APB4_DIV_1 RCC_SRDCFGR_SRDPPRE_DIV1 +#define LL_RCC_APB4_DIV_2 RCC_SRDCFGR_SRDPPRE_DIV2 +#define LL_RCC_APB4_DIV_4 RCC_SRDCFGR_SRDPPRE_DIV4 +#define LL_RCC_APB4_DIV_8 RCC_SRDCFGR_SRDPPRE_DIV8 +#define LL_RCC_APB4_DIV_16 RCC_SRDCFGR_SRDPPRE_DIV16 +#endif /* RCC_D3CFGR_D3PPRE_DIV1 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOxSOURCE MCO source selection + * @{ + */ +#define LL_RCC_MCO1SOURCE_HSI (uint32_t)((RCC_CFGR_MCO1>>16U) | 0x00000000U) +#define LL_RCC_MCO1SOURCE_LSE (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_0) +#define LL_RCC_MCO1SOURCE_HSE (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_1) +#define LL_RCC_MCO1SOURCE_PLL1QCLK (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_1|RCC_CFGR_MCO1_0) +#define LL_RCC_MCO1SOURCE_HSI48 (uint32_t)((RCC_CFGR_MCO1>>16U) | RCC_CFGR_MCO1_2) +#define LL_RCC_MCO2SOURCE_SYSCLK (uint32_t)((RCC_CFGR_MCO2>>16U) | 0x00000000U) +#define LL_RCC_MCO2SOURCE_PLL2PCLK (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_0) +#define LL_RCC_MCO2SOURCE_HSE (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_1) +#define LL_RCC_MCO2SOURCE_PLL1PCLK (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_1|RCC_CFGR_MCO2_0) +#define LL_RCC_MCO2SOURCE_CSI (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_2) +#define LL_RCC_MCO2SOURCE_LSI (uint32_t)((RCC_CFGR_MCO2>>16U) | RCC_CFGR_MCO2_2|RCC_CFGR_MCO2_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOx_DIV MCO prescaler + * @{ + */ +#define LL_RCC_MCO1_DIV_1 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0) +#define LL_RCC_MCO1_DIV_2 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1) +#define LL_RCC_MCO1_DIV_3 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1) +#define LL_RCC_MCO1_DIV_4 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_5 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_6 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_7 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) +#define LL_RCC_MCO1_DIV_8 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_9 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_10 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_11 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_12 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_13 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_14 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2 | RCC_CFGR_MCO1PRE_3) +#define LL_RCC_MCO1_DIV_15 (uint32_t)((RCC_CFGR_MCO1PRE>>16U) | RCC_CFGR_MCO1PRE) +#define LL_RCC_MCO2_DIV_1 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0) +#define LL_RCC_MCO2_DIV_2 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1) +#define LL_RCC_MCO2_DIV_3 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1) +#define LL_RCC_MCO2_DIV_4 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_5 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_6 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_7 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2) +#define LL_RCC_MCO2_DIV_8 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_9 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_10 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_11 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_12 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_13 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_0 | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_14 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE_1 | RCC_CFGR_MCO2PRE_2 | RCC_CFGR_MCO2PRE_3) +#define LL_RCC_MCO2_DIV_15 (uint32_t)((RCC_CFGR_MCO2PRE>>16U) | RCC_CFGR_MCO2PRE) + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_HSEDIV HSE prescaler for RTC clock + * @{ + */ +#define LL_RCC_RTC_NOCLOCK (uint32_t)(0x00000000U) +#define LL_RCC_RTC_HSE_DIV_2 (uint32_t)(RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_3 (uint32_t)(RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_4 (uint32_t)(RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_5 (uint32_t)(RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_6 (uint32_t)(RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_7 (uint32_t)(RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_8 (uint32_t)(RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_9 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_10 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_11 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_12 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_13 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_14 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_15 (uint32_t)(RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_16 (uint32_t)(RCC_CFGR_RTCPRE_4) +#define LL_RCC_RTC_HSE_DIV_17 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_18 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_19 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_20 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_21 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_22 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_23 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_24 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_25 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_26 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_27 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_28 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_29 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_30 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_31 (uint32_t)(RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_32 (uint32_t)(RCC_CFGR_RTCPRE_5) +#define LL_RCC_RTC_HSE_DIV_33 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_34 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_35 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_36 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_37 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_38 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_39 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_40 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_41 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_42 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_43 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_44 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_45 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_46 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_47 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_48 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4) +#define LL_RCC_RTC_HSE_DIV_49 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_50 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_51 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_52 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_53 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_54 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_55 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_56 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3) +#define LL_RCC_RTC_HSE_DIV_57 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_58 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_59 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_60 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2) +#define LL_RCC_RTC_HSE_DIV_61 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_0) +#define LL_RCC_RTC_HSE_DIV_62 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1) +#define LL_RCC_RTC_HSE_DIV_63 (uint32_t)(RCC_CFGR_RTCPRE_5|RCC_CFGR_RTCPRE_4|RCC_CFGR_RTCPRE_3|RCC_CFGR_RTCPRE_2|RCC_CFGR_RTCPRE_1|RCC_CFGR_RTCPRE_0) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx_CLKSOURCE Peripheral USART clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_USART16SEL) +#define LL_RCC_USART16_CLKSOURCE_PCLK2 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, 0x00000000U) +#define LL_RCC_USART16_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_0) +#define LL_RCC_USART16_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_1) +#define LL_RCC_USART16_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_0 | RCC_D2CCIP2R_USART16SEL_1) +#define LL_RCC_USART16_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_2) +#define LL_RCC_USART16_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, RCC_D2CCIP2R_USART16SEL_0 | RCC_D2CCIP2R_USART16SEL_2) +/* Aliases */ +#define LL_RCC_USART16910_CLKSOURCE_PCLK2 LL_RCC_USART16_CLKSOURCE_PCLK2 +#define LL_RCC_USART16910_CLKSOURCE_PLL2Q LL_RCC_USART16_CLKSOURCE_PLL2Q +#define LL_RCC_USART16910_CLKSOURCE_PLL3Q LL_RCC_USART16_CLKSOURCE_PLL3Q +#define LL_RCC_USART16910_CLKSOURCE_HSI LL_RCC_USART16_CLKSOURCE_HSI +#define LL_RCC_USART16910_CLKSOURCE_CSI LL_RCC_USART16_CLKSOURCE_CSI +#define LL_RCC_USART16910_CLKSOURCE_LSE LL_RCC_USART16_CLKSOURCE_LSE + +#elif defined(RCC_D2CCIP2R_USART16910SEL) +#define LL_RCC_USART16910_CLKSOURCE_PCLK2 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, 0x00000000U) +#define LL_RCC_USART16910_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_0) +#define LL_RCC_USART16910_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_0 | RCC_D2CCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_2) +#define LL_RCC_USART16910_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, RCC_D2CCIP2R_USART16910SEL_0 | RCC_D2CCIP2R_USART16910SEL_2) +/* Aliases */ +#define LL_RCC_USART16_CLKSOURCE_PCLK2 LL_RCC_USART16910_CLKSOURCE_PCLK2 +#define LL_RCC_USART16_CLKSOURCE_PLL2Q LL_RCC_USART16910_CLKSOURCE_PLL2Q +#define LL_RCC_USART16_CLKSOURCE_PLL3Q LL_RCC_USART16910_CLKSOURCE_PLL3Q +#define LL_RCC_USART16_CLKSOURCE_HSI LL_RCC_USART16910_CLKSOURCE_HSI +#define LL_RCC_USART16_CLKSOURCE_CSI LL_RCC_USART16910_CLKSOURCE_CSI +#define LL_RCC_USART16_CLKSOURCE_LSE LL_RCC_USART16910_CLKSOURCE_LSE + +#else +#define LL_RCC_USART16910_CLKSOURCE_PCLK2 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, 0x00000000U) +#define LL_RCC_USART16910_CLKSOURCE_PLL2Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_0) +#define LL_RCC_USART16910_CLKSOURCE_PLL3Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_0 | RCC_CDCCIP2R_USART16910SEL_1) +#define LL_RCC_USART16910_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_2) +#define LL_RCC_USART16910_CLKSOURCE_LSE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, RCC_CDCCIP2R_USART16910SEL_0 | RCC_CDCCIP2R_USART16910SEL_2) +/* Aliases */ +#define LL_RCC_USART16_CLKSOURCE_PCLK2 LL_RCC_USART16910_CLKSOURCE_PCLK2 +#define LL_RCC_USART16_CLKSOURCE_PLL2Q LL_RCC_USART16910_CLKSOURCE_PLL2Q +#define LL_RCC_USART16_CLKSOURCE_PLL3Q LL_RCC_USART16910_CLKSOURCE_PLL3Q +#define LL_RCC_USART16_CLKSOURCE_HSI LL_RCC_USART16910_CLKSOURCE_HSI +#define LL_RCC_USART16_CLKSOURCE_CSI LL_RCC_USART16910_CLKSOURCE_CSI +#define LL_RCC_USART16_CLKSOURCE_LSE LL_RCC_USART16910_CLKSOURCE_LSE +#endif /* RCC_D2CCIP2R_USART16SEL */ +#if defined(RCC_D2CCIP2R_USART28SEL) +#define LL_RCC_USART234578_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, 0x00000000U) +#define LL_RCC_USART234578_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_0) +#define LL_RCC_USART234578_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_0 | RCC_D2CCIP2R_USART28SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_2) +#define LL_RCC_USART234578_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, RCC_D2CCIP2R_USART28SEL_0 | RCC_D2CCIP2R_USART28SEL_2) +#else +#define LL_RCC_USART234578_CLKSOURCE_PCLK1 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, 0x00000000U) +#define LL_RCC_USART234578_CLKSOURCE_PLL2Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_0) +#define LL_RCC_USART234578_CLKSOURCE_PLL3Q LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_0 | RCC_CDCCIP2R_USART234578SEL_1) +#define LL_RCC_USART234578_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_2) +#define LL_RCC_USART234578_CLKSOURCE_LSE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, RCC_CDCCIP2R_USART234578SEL_0 | RCC_CDCCIP2R_USART234578SEL_2) +#endif /* RCC_D2CCIP2R_USART28SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPUARTx_CLKSOURCE Peripheral LPUART clock source selection + * @{ + */ +#if defined(RCC_D3CCIPR_LPUART1SEL) +#define LL_RCC_LPUART1_CLKSOURCE_PCLK4 (0x00000000U) +#define LL_RCC_LPUART1_CLKSOURCE_PLL2Q (RCC_D3CCIPR_LPUART1SEL_0) +#define LL_RCC_LPUART1_CLKSOURCE_PLL3Q (RCC_D3CCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_HSI (RCC_D3CCIPR_LPUART1SEL_0 | RCC_D3CCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_CSI (RCC_D3CCIPR_LPUART1SEL_2) +#define LL_RCC_LPUART1_CLKSOURCE_LSE (RCC_D3CCIPR_LPUART1SEL_0 | RCC_D3CCIPR_LPUART1SEL_2) +#else +#define LL_RCC_LPUART1_CLKSOURCE_PCLK4 (0x00000000U) +#define LL_RCC_LPUART1_CLKSOURCE_PLL2Q (RCC_SRDCCIPR_LPUART1SEL_0) +#define LL_RCC_LPUART1_CLKSOURCE_PLL3Q (RCC_SRDCCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_HSI (RCC_SRDCCIPR_LPUART1SEL_0 | RCC_SRDCCIPR_LPUART1SEL_1) +#define LL_RCC_LPUART1_CLKSOURCE_CSI (RCC_SRDCCIPR_LPUART1SEL_2) +#define LL_RCC_LPUART1_CLKSOURCE_LSE (RCC_SRDCCIPR_LPUART1SEL_0 | RCC_SRDCCIPR_LPUART1SEL_2) +#endif /* RCC_D3CCIPR_LPUART1SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Cx_CLKSOURCE Peripheral I2C clock source selection + * @{ + */ +#if defined (RCC_D2CCIP2R_I2C123SEL) +#define LL_RCC_I2C123_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, 0x00000000U) +#define LL_RCC_I2C123_CLKSOURCE_PLL3R LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, RCC_D2CCIP2R_I2C123SEL_0) +#define LL_RCC_I2C123_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, RCC_D2CCIP2R_I2C123SEL_1) +#define LL_RCC_I2C123_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, RCC_D2CCIP2R_I2C123SEL_0 | RCC_D2CCIP2R_I2C123SEL_1) +/* Aliases */ +#define LL_RCC_I2C1235_CLKSOURCE_PCLK1 LL_RCC_I2C123_CLKSOURCE_PCLK1 +#define LL_RCC_I2C1235_CLKSOURCE_PLL3R LL_RCC_I2C123_CLKSOURCE_PLL3R +#define LL_RCC_I2C1235_CLKSOURCE_HSI LL_RCC_I2C123_CLKSOURCE_HSI +#define LL_RCC_I2C1235_CLKSOURCE_CSI LL_RCC_I2C123_CLKSOURCE_CSI + +#elif defined (RCC_D2CCIP2R_I2C1235SEL) +#define LL_RCC_I2C1235_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, 0x00000000U) +#define LL_RCC_I2C1235_CLKSOURCE_PLL3R LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, RCC_D2CCIP2R_I2C1235SEL_0) +#define LL_RCC_I2C1235_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, RCC_D2CCIP2R_I2C1235SEL_1) +#define LL_RCC_I2C1235_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, RCC_D2CCIP2R_I2C1235SEL_0 | RCC_D2CCIP2R_I2C1235SEL_1) +/* Aliases */ +#define LL_RCC_I2C123_CLKSOURCE_PCLK1 LL_RCC_I2C1235_CLKSOURCE_PCLK1 +#define LL_RCC_I2C123_CLKSOURCE_PLL3R LL_RCC_I2C1235_CLKSOURCE_PLL3R +#define LL_RCC_I2C123_CLKSOURCE_HSI LL_RCC_I2C1235_CLKSOURCE_HSI +#define LL_RCC_I2C123_CLKSOURCE_CSI LL_RCC_I2C1235_CLKSOURCE_CSI + +#else +#define LL_RCC_I2C123_CLKSOURCE_PCLK1 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, 0x00000000U) +#define LL_RCC_I2C123_CLKSOURCE_PLL3R LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, RCC_CDCCIP2R_I2C123SEL_0) +#define LL_RCC_I2C123_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, RCC_CDCCIP2R_I2C123SEL_1) +#define LL_RCC_I2C123_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, RCC_CDCCIP2R_I2C123SEL_0 | RCC_CDCCIP2R_I2C123SEL_1) +#endif /* RCC_D2CCIP2R_I2C123SEL */ +#if defined (RCC_D3CCIPR_I2C4SEL) +#define LL_RCC_I2C4_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, 0x00000000U) +#define LL_RCC_I2C4_CLKSOURCE_PLL3R LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, RCC_D3CCIPR_I2C4SEL_0) +#define LL_RCC_I2C4_CLKSOURCE_HSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, RCC_D3CCIPR_I2C4SEL_1) +#define LL_RCC_I2C4_CLKSOURCE_CSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, RCC_D3CCIPR_I2C4SEL_0 | RCC_D3CCIPR_I2C4SEL_1) +#else +#define LL_RCC_I2C4_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, 0x00000000U) +#define LL_RCC_I2C4_CLKSOURCE_PLL3R LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, RCC_SRDCCIPR_I2C4SEL_0) +#define LL_RCC_I2C4_CLKSOURCE_HSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, RCC_SRDCCIPR_I2C4SEL_1) +#define LL_RCC_I2C4_CLKSOURCE_CSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, RCC_SRDCCIPR_I2C4SEL_0 | RCC_SRDCCIPR_I2C4SEL_1) +#endif /* RCC_D3CCIPR_I2C4SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIMx_CLKSOURCE Peripheral LPTIM clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_0) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL3R LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_0 | RCC_D2CCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSI LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_2) +#define LL_RCC_LPTIM1_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, RCC_D2CCIP2R_LPTIM1SEL_0 | RCC_D2CCIP2R_LPTIM1SEL_2) +#else +#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_0) +#define LL_RCC_LPTIM1_CLKSOURCE_PLL3R LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_0 | RCC_CDCCIP2R_LPTIM1SEL_1) +#define LL_RCC_LPTIM1_CLKSOURCE_LSI LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_2) +#define LL_RCC_LPTIM1_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, RCC_CDCCIP2R_LPTIM1SEL_0 | RCC_CDCCIP2R_LPTIM1SEL_2) +#endif /* RCC_D2CCIP2R_LPTIM1SEL */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_0) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL3R LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_0 | RCC_D3CCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_2) +#define LL_RCC_LPTIM2_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, RCC_D3CCIPR_LPTIM2SEL_0 | RCC_D3CCIPR_LPTIM2SEL_2) +#else +#define LL_RCC_LPTIM2_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL2P LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_0) +#define LL_RCC_LPTIM2_CLKSOURCE_PLL3R LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_0 | RCC_SRDCCIPR_LPTIM2SEL_1) +#define LL_RCC_LPTIM2_CLKSOURCE_LSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_2) +#define LL_RCC_LPTIM2_CLKSOURCE_CLKP LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, RCC_SRDCCIPR_LPTIM2SEL_0 | RCC_SRDCCIPR_LPTIM2SEL_2) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define LL_RCC_LPTIM345_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_0) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL3R LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_0 | RCC_D3CCIPR_LPTIM345SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_2) +#define LL_RCC_LPTIM345_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, RCC_D3CCIPR_LPTIM345SEL_0 | RCC_D3CCIPR_LPTIM345SEL_2) +#else +#define LL_RCC_LPTIM345_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL2P LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_0) +#define LL_RCC_LPTIM345_CLKSOURCE_PLL3R LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_0 | RCC_SRDCCIPR_LPTIM3SEL_1) +#define LL_RCC_LPTIM345_CLKSOURCE_LSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_2) +#define LL_RCC_LPTIM345_CLKSOURCE_CLKP LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, RCC_SRDCCIPR_LPTIM3SEL_0 | RCC_SRDCCIPR_LPTIM3SEL_2) +/* aliases*/ +#define LL_RCC_LPTIM3_CLKSOURCE_PCLK4 LL_RCC_LPTIM345_CLKSOURCE_PCLK4 +#define LL_RCC_LPTIM3_CLKSOURCE_PLL2P LL_RCC_LPTIM345_CLKSOURCE_PLL2P +#define LL_RCC_LPTIM3_CLKSOURCE_PLL3R LL_RCC_LPTIM345_CLKSOURCE_PLL3R +#define LL_RCC_LPTIM3_CLKSOURCE_LSE LL_RCC_LPTIM345_CLKSOURCE_LSE +#define LL_RCC_LPTIM3_CLKSOURCE_LSI LL_RCC_LPTIM345_CLKSOURCE_LSI +#define LL_RCC_LPTIM3_CLKSOURCE_CLKP LL_RCC_LPTIM345_CLKSOURCE_CLKP +#endif /* RCC_D3CCIPR_LPTIM345SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SAIx_CLKSOURCE Peripheral SAI clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE_PLL1Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, 0x00000000U) +#define LL_RCC_SAI1_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_0) +#define LL_RCC_SAI1_CLKSOURCE_PLL3P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_0 | RCC_D2CCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, RCC_D2CCIP1R_SAI1SEL_2) +#else +#define LL_RCC_SAI1_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, 0x00000000U) +#define LL_RCC_SAI1_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_0) +#define LL_RCC_SAI1_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_0 | RCC_CDCCIP1R_SAI1SEL_1) +#define LL_RCC_SAI1_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, RCC_CDCCIP1R_SAI1SEL_2) +#endif +#if defined(SAI3) +#define LL_RCC_SAI23_CLKSOURCE_PLL1Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, 0x00000000U) +#define LL_RCC_SAI23_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_0) +#define LL_RCC_SAI23_CLKSOURCE_PLL3P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_1) +#define LL_RCC_SAI23_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_0 | RCC_D2CCIP1R_SAI23SEL_1) +#define LL_RCC_SAI23_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, RCC_D2CCIP1R_SAI23SEL_2) +#endif /* SAI3 */ +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define LL_RCC_SAI2A_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, 0x00000000U) +#define LL_RCC_SAI2A_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_0) +#define LL_RCC_SAI2A_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_1) +#define LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_0 | RCC_CDCCIP1R_SAI2ASEL_1) +#define LL_RCC_SAI2A_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_2) +#define LL_RCC_SAI2A_CLKSOURCE_SPDIF LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, RCC_CDCCIP1R_SAI2ASEL_0 | RCC_CDCCIP1R_SAI2ASEL_2) +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define LL_RCC_SAI2B_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, 0x00000000U) +#define LL_RCC_SAI2B_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_0) +#define LL_RCC_SAI2B_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_1) +#define LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_0 | RCC_CDCCIP1R_SAI2BSEL_1) +#define LL_RCC_SAI2B_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_2) +#define LL_RCC_SAI2B_CLKSOURCE_SPDIF LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, RCC_CDCCIP1R_SAI2BSEL_0 | RCC_CDCCIP1R_SAI2BSEL_2) +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(SAI4_Block_A) +#define LL_RCC_SAI4A_CLKSOURCE_PLL1Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, 0x00000000U) +#define LL_RCC_SAI4A_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_0) +#define LL_RCC_SAI4A_CLKSOURCE_PLL3P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_1) +#define LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_0 | RCC_D3CCIPR_SAI4ASEL_1) +#define LL_RCC_SAI4A_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_2) +#if defined(RCC_VER_3_0) +#define LL_RCC_SAI4A_CLKSOURCE_SPDIF LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, RCC_D3CCIPR_SAI4ASEL_2 | RCC_D3CCIPR_SAI4ASEL_0) +#endif /* RCC_VER_3_0 */ +#endif /* SAI4_Block_A */ +#if defined(SAI4_Block_B) +#define LL_RCC_SAI4B_CLKSOURCE_PLL1Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, 0x00000000U) +#define LL_RCC_SAI4B_CLKSOURCE_PLL2P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_0) +#define LL_RCC_SAI4B_CLKSOURCE_PLL3P LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_1) +#define LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_0 | RCC_D3CCIPR_SAI4BSEL_1) +#define LL_RCC_SAI4B_CLKSOURCE_CLKP LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_2) +#if defined(RCC_VER_3_0) +#define LL_RCC_SAI4B_CLKSOURCE_SPDIF LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, RCC_D3CCIPR_SAI4BSEL_2 | RCC_D3CCIPR_SAI4BSEL_0) +#endif /* RCC_VER_3_0 */ +#endif /* SAI4_Block_B */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SDMMC_CLKSOURCE Peripheral SDMMC clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define LL_RCC_SDMMC_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SDMMC_CLKSOURCE_PLL2R (RCC_D1CCIPR_SDMMCSEL) +#else +#define LL_RCC_SDMMC_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SDMMC_CLKSOURCE_PLL2R (RCC_CDCCIPR_SDMMCSEL) +#endif /* RCC_D1CCIPR_SDMMCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_RNGSEL) +#define LL_RCC_RNG_CLKSOURCE_HSI48 (0x00000000U) +#define LL_RCC_RNG_CLKSOURCE_PLL1Q (RCC_D2CCIP2R_RNGSEL_0) +#define LL_RCC_RNG_CLKSOURCE_LSE (RCC_D2CCIP2R_RNGSEL_1) +#define LL_RCC_RNG_CLKSOURCE_LSI (RCC_D2CCIP2R_RNGSEL_1 | RCC_D2CCIP2R_RNGSEL_0) +#else +#define LL_RCC_RNG_CLKSOURCE_HSI48 (0x00000000U) +#define LL_RCC_RNG_CLKSOURCE_PLL1Q (RCC_CDCCIP2R_RNGSEL_0) +#define LL_RCC_RNG_CLKSOURCE_LSE (RCC_CDCCIP2R_RNGSEL_1) +#define LL_RCC_RNG_CLKSOURCE_LSI (RCC_CDCCIP2R_RNGSEL_1 | RCC_CDCCIP2R_RNGSEL_0) +#endif /* RCC_D2CCIP2R_RNGSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_USBSEL) +#define LL_RCC_USB_CLKSOURCE_DISABLE (0x00000000U) +#define LL_RCC_USB_CLKSOURCE_PLL1Q (RCC_D2CCIP2R_USBSEL_0) +#define LL_RCC_USB_CLKSOURCE_PLL3Q (RCC_D2CCIP2R_USBSEL_1) +#define LL_RCC_USB_CLKSOURCE_HSI48 (RCC_D2CCIP2R_USBSEL_1 | RCC_D2CCIP2R_USBSEL_0) +#else +#define LL_RCC_USB_CLKSOURCE_DISABLE (0x00000000U) +#define LL_RCC_USB_CLKSOURCE_PLL1Q (RCC_CDCCIP2R_USBSEL_0) +#define LL_RCC_USB_CLKSOURCE_PLL3Q (RCC_CDCCIP2R_USBSEL_1) +#define LL_RCC_USB_CLKSOURCE_HSI48 (RCC_CDCCIP2R_USBSEL_1 | RCC_CDCCIP2R_USBSEL_0) +#endif /* RCC_D2CCIP2R_USBSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CEC_CLKSOURCE Peripheral CEC clock source selection + * @{ + */ +#if defined(RCC_D2CCIP2R_CECSEL) +#define LL_RCC_CEC_CLKSOURCE_LSE (0x00000000U) +#define LL_RCC_CEC_CLKSOURCE_LSI (RCC_D2CCIP2R_CECSEL_0) +#define LL_RCC_CEC_CLKSOURCE_CSI_DIV122 (RCC_D2CCIP2R_CECSEL_1) +#else +#define LL_RCC_CEC_CLKSOURCE_LSE (0x00000000U) +#define LL_RCC_CEC_CLKSOURCE_LSI (RCC_CDCCIP2R_CECSEL_0) +#define LL_RCC_CEC_CLKSOURCE_CSI_DIV122 (RCC_CDCCIP2R_CECSEL_1) +#endif +/** + * @} + */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE_PHY (0x00000000U) +#define LL_RCC_DSI_CLKSOURCE_PLL2Q (RCC_D1CCIPR_DSISEL) +/** + * @} + */ +#endif /* DSI */ + +/** @defgroup RCC_LL_EC_DFSDM_CLKSOURCE Peripheral DFSDM clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 (0x00000000U) +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK (RCC_D2CCIP1R_DFSDM1SEL) +#else +#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 (0x00000000U) +#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK (RCC_CDCCIP1R_DFSDM1SEL) +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +/** + * @} + */ + +#if defined(DFSDM2_BASE) +/** @defgroup RCC_LL_EC_DFSDM2_CLKSOURCE Peripheral DFSDM2 clock source selection + * @{ + */ +#define LL_RCC_DFSDM2_CLKSOURCE_PCLK4 (0x00000000U) +#define LL_RCC_DFSDM2_CLKSOURCE_SYSCLK (RCC_SRDCCIPR_DFSDM2SEL) +/** + * @} + */ +#endif /* DFSDM2_BASE */ + +/** @defgroup RCC_LL_EC_FMC_CLKSOURCE Peripheral FMC clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define LL_RCC_FMC_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_FMC_CLKSOURCE_PLL1Q (RCC_D1CCIPR_FMCSEL_0) +#define LL_RCC_FMC_CLKSOURCE_PLL2R (RCC_D1CCIPR_FMCSEL_1) +#define LL_RCC_FMC_CLKSOURCE_CLKP (RCC_D1CCIPR_FMCSEL_0 | RCC_D1CCIPR_FMCSEL_1) +#else +#define LL_RCC_FMC_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_FMC_CLKSOURCE_PLL1Q (RCC_CDCCIPR_FMCSEL_0) +#define LL_RCC_FMC_CLKSOURCE_PLL2R (RCC_CDCCIPR_FMCSEL_1) +#define LL_RCC_FMC_CLKSOURCE_CLKP (RCC_CDCCIPR_FMCSEL_0 | RCC_CDCCIPR_FMCSEL_1) +#endif /* RCC_D1CCIPR_FMCSEL */ +/** + * @} + */ + +#if defined(QUADSPI) +/** @defgroup RCC_LL_EC_QSPI_CLKSOURCE Peripheral QSPI clock source selection + * @{ + */ +#define LL_RCC_QSPI_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_QSPI_CLKSOURCE_PLL1Q (RCC_D1CCIPR_QSPISEL_0) +#define LL_RCC_QSPI_CLKSOURCE_PLL2R (RCC_D1CCIPR_QSPISEL_1) +#define LL_RCC_QSPI_CLKSOURCE_CLKP (RCC_D1CCIPR_QSPISEL_0 | RCC_D1CCIPR_QSPISEL_1) +/** + * @} + */ +#endif /* QUADSPI */ + + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @defgroup RCC_LL_EC_OSPI_CLKSOURCE Peripheral OSPI clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_OCTOSPISEL) +#define LL_RCC_OSPI_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_OSPI_CLKSOURCE_PLL1Q (RCC_D1CCIPR_OCTOSPISEL_0) +#define LL_RCC_OSPI_CLKSOURCE_PLL2R (RCC_D1CCIPR_OCTOSPISEL_1) +#define LL_RCC_OSPI_CLKSOURCE_CLKP (RCC_D1CCIPR_OCTOSPISEL_0 | RCC_D1CCIPR_OCTOSPISEL_1) +#else +#define LL_RCC_OSPI_CLKSOURCE_HCLK (0x00000000U) +#define LL_RCC_OSPI_CLKSOURCE_PLL1Q (RCC_CDCCIPR_OCTOSPISEL_0) +#define LL_RCC_OSPI_CLKSOURCE_PLL2R (RCC_CDCCIPR_OCTOSPISEL_1) +#define LL_RCC_OSPI_CLKSOURCE_CLKP (RCC_CDCCIPR_OCTOSPISEL_0 | RCC_CDCCIPR_OCTOSPISEL_1) +#endif /* RCC_D1CCIPR_OCTOSPISEL */ +/** + * @} + */ +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + + +/** @defgroup RCC_LL_EC_CLKP_CLKSOURCE Peripheral CLKP clock source selection + * @{ + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define LL_RCC_CLKP_CLKSOURCE_HSI (0x00000000U) +#define LL_RCC_CLKP_CLKSOURCE_CSI (RCC_D1CCIPR_CKPERSEL_0) +#define LL_RCC_CLKP_CLKSOURCE_HSE (RCC_D1CCIPR_CKPERSEL_1) +#else +#define LL_RCC_CLKP_CLKSOURCE_HSI (0x00000000U) +#define LL_RCC_CLKP_CLKSOURCE_CSI (RCC_CDCCIPR_CKPERSEL_0) +#define LL_RCC_CLKP_CLKSOURCE_HSE (RCC_CDCCIPR_CKPERSEL_1) +#endif /* RCC_D1CCIPR_CKPERSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPIx_CLKSOURCE Peripheral SPI clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define LL_RCC_SPI123_CLKSOURCE_PLL1Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, 0x00000000U) +#define LL_RCC_SPI123_CLKSOURCE_PLL2P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_0) +#define LL_RCC_SPI123_CLKSOURCE_PLL3P LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_0 | RCC_D2CCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_CLKP LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, RCC_D2CCIP1R_SPI123SEL_2) +#else +#define LL_RCC_SPI123_CLKSOURCE_PLL1Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, 0x00000000U) +#define LL_RCC_SPI123_CLKSOURCE_PLL2P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_0) +#define LL_RCC_SPI123_CLKSOURCE_PLL3P LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_0 | RCC_CDCCIP1R_SPI123SEL_1) +#define LL_RCC_SPI123_CLKSOURCE_CLKP LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, RCC_CDCCIP1R_SPI123SEL_2) +#endif /* RCC_D2CCIP1R_SPI123SEL */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define LL_RCC_SPI45_CLKSOURCE_PCLK2 LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, 0x00000000U) +#define LL_RCC_SPI45_CLKSOURCE_PLL2Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_0) +#define LL_RCC_SPI45_CLKSOURCE_PLL3Q LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_HSI LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_0 | RCC_D2CCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_CSI LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_2) +#define LL_RCC_SPI45_CLKSOURCE_HSE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, RCC_D2CCIP1R_SPI45SEL_0 | RCC_D2CCIP1R_SPI45SEL_2) +#else +#define LL_RCC_SPI45_CLKSOURCE_PCLK2 LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, 0x00000000U) +#define LL_RCC_SPI45_CLKSOURCE_PLL2Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_0) +#define LL_RCC_SPI45_CLKSOURCE_PLL3Q LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_HSI LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_0 | RCC_CDCCIP1R_SPI45SEL_1) +#define LL_RCC_SPI45_CLKSOURCE_CSI LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_2) +#define LL_RCC_SPI45_CLKSOURCE_HSE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, RCC_CDCCIP1R_SPI45SEL_0 | RCC_CDCCIP1R_SPI45SEL_2) +#endif /* (RCC_D2CCIP1R_SPI45SEL */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define LL_RCC_SPI6_CLKSOURCE_PCLK4 LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, 0x00000000U) +#define LL_RCC_SPI6_CLKSOURCE_PLL2Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_0) +#define LL_RCC_SPI6_CLKSOURCE_PLL3Q LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_HSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_0 | RCC_D3CCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_CSI LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_HSE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, RCC_D3CCIPR_SPI6SEL_0 | RCC_D3CCIPR_SPI6SEL_2) +#else +#define LL_RCC_SPI6_CLKSOURCE_PCLK4 LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, 0x00000000U) +#define LL_RCC_SPI6_CLKSOURCE_PLL2Q LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_0) +#define LL_RCC_SPI6_CLKSOURCE_PLL3Q LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_HSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_0 | RCC_SRDCCIPR_SPI6SEL_1) +#define LL_RCC_SPI6_CLKSOURCE_CSI LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_HSE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_0 | RCC_SRDCCIPR_SPI6SEL_2) +#define LL_RCC_SPI6_CLKSOURCE_I2S_CKIN LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, RCC_SRDCCIPR_SPI6SEL_1 | RCC_SRDCCIPR_SPI6SEL_2) +#endif /* RCC_D3CCIPR_SPI6SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPDIF_CLKSOURCE Peripheral SPDIF clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define LL_RCC_SPDIF_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SPDIF_CLKSOURCE_PLL2R (RCC_D2CCIP1R_SPDIFSEL_0) +#define LL_RCC_SPDIF_CLKSOURCE_PLL3R (RCC_D2CCIP1R_SPDIFSEL_1) +#define LL_RCC_SPDIF_CLKSOURCE_HSI (RCC_D2CCIP1R_SPDIFSEL_0 | RCC_D2CCIP1R_SPDIFSEL_1) +#else +#define LL_RCC_SPDIF_CLKSOURCE_PLL1Q (0x00000000U) +#define LL_RCC_SPDIF_CLKSOURCE_PLL2R (RCC_CDCCIP1R_SPDIFSEL_0) +#define LL_RCC_SPDIF_CLKSOURCE_PLL3R (RCC_CDCCIP1R_SPDIFSEL_1) +#define LL_RCC_SPDIF_CLKSOURCE_HSI (RCC_CDCCIP1R_SPDIFSEL_0 | RCC_CDCCIP1R_SPDIFSEL_1) +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +/** + * @} + */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN_CLKSOURCE Peripheral FDCAN clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define LL_RCC_FDCAN_CLKSOURCE_HSE (0x00000000U) +#define LL_RCC_FDCAN_CLKSOURCE_PLL1Q (RCC_D2CCIP1R_FDCANSEL_0) +#define LL_RCC_FDCAN_CLKSOURCE_PLL2Q (RCC_D2CCIP1R_FDCANSEL_1) +#else +#define LL_RCC_FDCAN_CLKSOURCE_HSE (0x00000000U) +#define LL_RCC_FDCAN_CLKSOURCE_PLL1Q (RCC_CDCCIP1R_FDCANSEL_0) +#define LL_RCC_FDCAN_CLKSOURCE_PLL2Q (RCC_CDCCIP1R_FDCANSEL_1) +#endif /* RCC_D2CCIP1R_FDCANSEL */ +/** + * @} + */ +#endif /*FDCAN1 || FDCAN2*/ + +/** @defgroup RCC_LL_EC_SWP_CLKSOURCE Peripheral SWP clock source selection + * @{ + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define LL_RCC_SWP_CLKSOURCE_PCLK1 (0x00000000U) +#define LL_RCC_SWP_CLKSOURCE_HSI (RCC_D2CCIP1R_SWPSEL) +#else +#define LL_RCC_SWP_CLKSOURCE_PCLK1 (0x00000000U) +#define LL_RCC_SWP_CLKSOURCE_HSI (RCC_CDCCIP1R_SWPSEL) +#endif /* RCC_D2CCIP1R_SWPSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection + * @{ + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define LL_RCC_ADC_CLKSOURCE_PLL2P (0x00000000U) +#define LL_RCC_ADC_CLKSOURCE_PLL3R (RCC_D3CCIPR_ADCSEL_0) +#define LL_RCC_ADC_CLKSOURCE_CLKP (RCC_D3CCIPR_ADCSEL_1) +#else +#define LL_RCC_ADC_CLKSOURCE_PLL2P (0x00000000U) +#define LL_RCC_ADC_CLKSOURCE_PLL3R (RCC_SRDCCIPR_ADCSEL_0) +#define LL_RCC_ADC_CLKSOURCE_CLKP (RCC_SRDCCIPR_ADCSEL_1) +#endif /* RCC_D3CCIPR_ADCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USARTx Peripheral USART get clock source + * @{ + */ +#if defined (RCC_D2CCIP2R_USART16SEL) +#define LL_RCC_USART16_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16SEL, RCC_D2CCIP2R_USART16SEL_Pos, 0x00000000U) +#elif defined (RCC_D2CCIP2R_USART16910SEL) +#define LL_RCC_USART16_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART16910SEL, RCC_D2CCIP2R_USART16910SEL_Pos, 0x00000000U) +/* alias*/ +#define LL_RCC_USART16910_CLKSOURCE LL_RCC_USART16_CLKSOURCE +#else +#define LL_RCC_USART16_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART16910SEL, RCC_CDCCIP2R_USART16910SEL_Pos, 0x00000000U) +/* alias*/ +#define LL_RCC_USART16910_CLKSOURCE LL_RCC_USART16_CLKSOURCE +#endif /* RCC_D2CCIP2R_USART16SEL */ +#if defined (RCC_D2CCIP2R_USART28SEL) +#define LL_RCC_USART234578_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_USART28SEL, RCC_D2CCIP2R_USART28SEL_Pos, 0x00000000U) +#else +#define LL_RCC_USART234578_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_USART234578SEL, RCC_CDCCIP2R_USART234578SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP2R_USART28SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPUARTx Peripheral LPUART get clock source + * @{ + */ +#if defined(RCC_D3CCIPR_LPUART1SEL) +#define LL_RCC_LPUART1_CLKSOURCE RCC_D3CCIPR_LPUART1SEL +#else +#define LL_RCC_LPUART1_CLKSOURCE RCC_SRDCCIPR_LPUART1SEL +#endif /* RCC_D3CCIPR_LPUART1SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_I2Cx Peripheral I2C get clock source + * @{ + */ +#if defined(RCC_D2CCIP2R_I2C123SEL) +#define LL_RCC_I2C123_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C123SEL, RCC_D2CCIP2R_I2C123SEL_Pos, 0x00000000U) +/* alias */ +#define LL_RCC_I2C1235_CLKSOURCE LL_RCC_I2C123_CLKSOURCE +#elif defined(RCC_D2CCIP2R_I2C1235SEL) +#define LL_RCC_I2C1235_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_I2C1235SEL, RCC_D2CCIP2R_I2C1235SEL_Pos, 0x00000000U) +/* alias */ +#define LL_RCC_I2C123_CLKSOURCE LL_RCC_I2C1235_CLKSOURCE +#else +#define LL_RCC_I2C123_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_I2C123SEL, RCC_CDCCIP2R_I2C123SEL_Pos, 0x00000000U) +/* alias */ +#define LL_RCC_I2C1235_CLKSOURCE LL_RCC_I2C123_CLKSOURCE +#endif /* RCC_D2CCIP2R_I2C123SEL */ +#if defined(RCC_D3CCIPR_I2C4SEL) +#define LL_RCC_I2C4_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_I2C4SEL, RCC_D3CCIPR_I2C4SEL_Pos, 0x00000000U) +#else +#define LL_RCC_I2C4_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_I2C4SEL, RCC_SRDCCIPR_I2C4SEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_I2C4SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LPTIMx Peripheral LPTIM get clock source + * @{ + */ +#if defined(RCC_D2CCIP2R_LPTIM1SEL) +#define LL_RCC_LPTIM1_CLKSOURCE LL_CLKSOURCE(D2CCIP2, RCC_D2CCIP2R_LPTIM1SEL, RCC_D2CCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#else +#define LL_RCC_LPTIM1_CLKSOURCE LL_CLKSOURCE(CDCCIP2, RCC_CDCCIP2R_LPTIM1SEL, RCC_CDCCIP2R_LPTIM1SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP2R_LPTIM1SEL) */ +#if defined(RCC_D3CCIPR_LPTIM2SEL) +#define LL_RCC_LPTIM2_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM2SEL, RCC_D3CCIPR_LPTIM2SEL_Pos, 0x00000000U) +#else +#define LL_RCC_LPTIM2_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM2SEL, RCC_SRDCCIPR_LPTIM2SEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_LPTIM2SEL */ +#if defined(RCC_D3CCIPR_LPTIM345SEL) +#define LL_RCC_LPTIM345_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_LPTIM345SEL, RCC_D3CCIPR_LPTIM345SEL_Pos, 0x00000000U) +#else +#define LL_RCC_LPTIM345_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_LPTIM3SEL, RCC_SRDCCIPR_LPTIM3SEL_Pos, 0x00000000U) +#define LL_RCC_LPTIM3_CLKSOURCE LL_RCC_LPTIM345_CLKSOURCE /* alias */ +#endif /* RCC_D3CCIPR_LPTIM345SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SAIx Peripheral SAI get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SAI1SEL) +#define LL_RCC_SAI1_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI1SEL, RCC_D2CCIP1R_SAI1SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SAI1_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI1SEL, RCC_CDCCIP1R_SAI1SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SAI1SEL */ +#if defined(RCC_D2CCIP1R_SAI23SEL) +#define LL_RCC_SAI23_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SAI23SEL, RCC_D2CCIP1R_SAI23SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SAI23SEL */ +#if defined(RCC_CDCCIP1R_SAI2ASEL) +#define LL_RCC_SAI2A_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2ASEL, RCC_CDCCIP1R_SAI2ASEL_Pos, 0x00000000U) +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) +#define LL_RCC_SAI2B_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SAI2BSEL, RCC_CDCCIP1R_SAI2BSEL_Pos, 0x00000000U) +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(RCC_D3CCIPR_SAI4ASEL) +#define LL_RCC_SAI4A_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4ASEL, RCC_D3CCIPR_SAI4ASEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_SAI4ASEL */ +#if defined(RCC_D3CCIPR_SAI4BSEL) +#define LL_RCC_SAI4B_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SAI4BSEL, RCC_D3CCIPR_SAI4BSEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_SAI4BSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SDMMC Peripheral SDMMC get clock source + * @{ + */ +#if defined(RCC_D1CCIPR_SDMMCSEL) +#define LL_RCC_SDMMC_CLKSOURCE RCC_D1CCIPR_SDMMCSEL +#else +#define LL_RCC_SDMMC_CLKSOURCE RCC_CDCCIPR_SDMMCSEL +#endif /* RCC_D1CCIPR_SDMMCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source + * @{ + */ +#if (RCC_D2CCIP2R_RNGSEL) +#define LL_RCC_RNG_CLKSOURCE RCC_D2CCIP2R_RNGSEL +#else +#define LL_RCC_RNG_CLKSOURCE RCC_CDCCIP2R_RNGSEL +#endif /* RCC_D2CCIP2R_RNGSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source + * @{ + */ +#if (RCC_D2CCIP2R_USBSEL) +#define LL_RCC_USB_CLKSOURCE RCC_D2CCIP2R_USBSEL +#else +#define LL_RCC_USB_CLKSOURCE RCC_CDCCIP2R_USBSEL +#endif /* RCC_D2CCIP2R_USBSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_CEC Peripheral CEC get clock source + * @{ + */ +#if (RCC_D2CCIP2R_CECSEL) +#define LL_RCC_CEC_CLKSOURCE RCC_D2CCIP2R_CECSEL +#else +#define LL_RCC_CEC_CLKSOURCE RCC_CDCCIP2R_CECSEL +#endif /* RCC_D2CCIP2R_CECSEL */ +/** + * @} + */ + +#if defined(DSI) +/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source + * @{ + */ +#define LL_RCC_DSI_CLKSOURCE RCC_D1CCIPR_DSISEL +/** + * @} + */ +#endif /* DSI */ + +/** @defgroup RCC_LL_EC_DFSDM Peripheral DFSDM get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) +#define LL_RCC_DFSDM1_CLKSOURCE RCC_D2CCIP1R_DFSDM1SEL +#else +#define LL_RCC_DFSDM1_CLKSOURCE RCC_CDCCIP1R_DFSDM1SEL +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +/** + * @} + */ + +#if defined(DFSDM2_BASE) +/** @defgroup RCC_LL_EC_DFSDM2 Peripheral DFSDM2 get clock source + * @{ + */ +#define LL_RCC_DFSDM2_CLKSOURCE RCC_SRDCCIPR_DFSDM2SEL +/** + * @} + */ +#endif /* DFSDM2_BASE */ + + + +/** @defgroup RCC_LL_EC_FMC Peripheral FMC get clock source + * @{ + */ +#if defined(RCC_D1CCIPR_FMCSEL) +#define LL_RCC_FMC_CLKSOURCE RCC_D1CCIPR_FMCSEL +#else +#define LL_RCC_FMC_CLKSOURCE RCC_CDCCIPR_FMCSEL +#endif +/** + * @} + */ + +#if defined(QUADSPI) +/** @defgroup RCC_LL_EC_QSPI Peripheral QSPI get clock source + * @{ + */ +#define LL_RCC_QSPI_CLKSOURCE RCC_D1CCIPR_QSPISEL +/** + * @} + */ +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** @defgroup RCC_LL_EC_OSPI Peripheral OSPI get clock source + * @{ + */ +#if defined(RCC_CDCCIPR_OCTOSPISEL) +#define LL_RCC_OSPI_CLKSOURCE RCC_CDCCIPR_OCTOSPISEL +#else +#define LL_RCC_OSPI_CLKSOURCE RCC_D1CCIPR_OCTOSPISEL +#endif /* RCC_CDCCIPR_OCTOSPISEL */ +/** + * @} + */ +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** @defgroup RCC_LL_EC_CLKP Peripheral CLKP get clock source + * @{ + */ +#if defined(RCC_D1CCIPR_CKPERSEL) +#define LL_RCC_CLKP_CLKSOURCE RCC_D1CCIPR_CKPERSEL +#else +#define LL_RCC_CLKP_CLKSOURCE RCC_CDCCIPR_CKPERSEL +#endif /* RCC_D1CCIPR_CKPERSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPIx Peripheral SPI get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SPI123SEL) +#define LL_RCC_SPI123_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI123SEL, RCC_D2CCIP1R_SPI123SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SPI123_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI123SEL, RCC_CDCCIP1R_SPI123SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SPI123SEL */ +#if defined(RCC_D2CCIP1R_SPI45SEL) +#define LL_RCC_SPI45_CLKSOURCE LL_CLKSOURCE(D2CCIP1, RCC_D2CCIP1R_SPI45SEL, RCC_D2CCIP1R_SPI45SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SPI45_CLKSOURCE LL_CLKSOURCE(CDCCIP1, RCC_CDCCIP1R_SPI45SEL, RCC_CDCCIP1R_SPI45SEL_Pos, 0x00000000U) +#endif /* RCC_D2CCIP1R_SPI45SEL */ +#if defined(RCC_D3CCIPR_SPI6SEL) +#define LL_RCC_SPI6_CLKSOURCE LL_CLKSOURCE(D3CCIP, RCC_D3CCIPR_SPI6SEL, RCC_D3CCIPR_SPI6SEL_Pos, 0x00000000U) +#else +#define LL_RCC_SPI6_CLKSOURCE LL_CLKSOURCE(SRDCCIP, RCC_SRDCCIPR_SPI6SEL, RCC_SRDCCIPR_SPI6SEL_Pos, 0x00000000U) +#endif /* RCC_D3CCIPR_SPI6SEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SPDIF Peripheral SPDIF get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SPDIFSEL) +#define LL_RCC_SPDIF_CLKSOURCE RCC_D2CCIP1R_SPDIFSEL +#else +#define LL_RCC_SPDIF_CLKSOURCE RCC_CDCCIP1R_SPDIFSEL +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +/** + * @} + */ + +#if defined(FDCAN1) || defined(FDCAN2) +/** @defgroup RCC_LL_EC_FDCAN Peripheral FDCAN get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_FDCANSEL) +#define LL_RCC_FDCAN_CLKSOURCE RCC_D2CCIP1R_FDCANSEL +#else +#define LL_RCC_FDCAN_CLKSOURCE RCC_CDCCIP1R_FDCANSEL +#endif +/** + * @} + */ +#endif /*FDCAN1 || FDCAN2*/ + +/** @defgroup RCC_LL_EC_SWP Peripheral SWP get clock source + * @{ + */ +#if defined(RCC_D2CCIP1R_SWPSEL) +#define LL_RCC_SWP_CLKSOURCE RCC_D2CCIP1R_SWPSEL +#else +#define LL_RCC_SWP_CLKSOURCE RCC_CDCCIP1R_SWPSEL +#endif /* RCC_D2CCIP1R_SWPSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source + * @{ + */ +#if defined(RCC_D3CCIPR_ADCSEL) +#define LL_RCC_ADC_CLKSOURCE RCC_D3CCIPR_ADCSEL +#else +#define LL_RCC_ADC_CLKSOURCE RCC_SRDCCIPR_ADCSEL +#endif /* RCC_D3CCIPR_ADCSEL */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection + * @{ + */ +#define LL_RCC_RTC_CLKSOURCE_NONE (uint32_t)(0x00000000U) +#define LL_RCC_RTC_CLKSOURCE_LSE (uint32_t)(RCC_BDCR_RTCSEL_0) +#define LL_RCC_RTC_CLKSOURCE_LSI (uint32_t)(RCC_BDCR_RTCSEL_1) +#define LL_RCC_RTC_CLKSOURCE_HSE (uint32_t)(RCC_BDCR_RTCSEL_0 | RCC_BDCR_RTCSEL_1) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_TIM_CLKPRESCALER Timers clocks prescalers selection + * @{ + */ +#define LL_RCC_TIM_PRESCALER_TWICE (uint32_t)(0x00000000U) +#define LL_RCC_TIM_PRESCALER_FOUR_TIMES (uint32_t)(RCC_CFGR_TIMPRE) +/** + * @} + */ + +#if defined(HRTIM1) +/** @defgroup RCC_LL_EC_HRTIM_CLKSOURCE High Resolution Timers clock selection + * @{ + */ +#define LL_RCC_HRTIM_CLKSOURCE_TIM (uint32_t)(0x00000000U) /* HRTIM Clock source is same as other timers */ +#define LL_RCC_HRTIM_CLKSOURCE_CPU (uint32_t)(RCC_CFGR_HRTIMSEL) /* HRTIM Clock source is the CPU clock */ +/** + * @} + */ +#endif /* HRTIM1 */ + +/** @defgroup RCC_LL_EC_PLLSOURCE All PLLs entry clock source + * @{ + */ +#define LL_RCC_PLLSOURCE_HSI RCC_PLLCKSELR_PLLSRC_HSI +#define LL_RCC_PLLSOURCE_CSI RCC_PLLCKSELR_PLLSRC_CSI +#define LL_RCC_PLLSOURCE_HSE RCC_PLLCKSELR_PLLSRC_HSE +#define LL_RCC_PLLSOURCE_NONE RCC_PLLCKSELR_PLLSRC_NONE +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLINPUTRANGE All PLLs input range + * @{ + */ +#define LL_RCC_PLLINPUTRANGE_1_2 (uint32_t)(0x00000000U) +#define LL_RCC_PLLINPUTRANGE_2_4 (uint32_t)(0x00000001) +#define LL_RCC_PLLINPUTRANGE_4_8 (uint32_t)(0x00000002) +#define LL_RCC_PLLINPUTRANGE_8_16 (uint32_t)(0x00000003) +/** + * @} + */ + +/** @defgroup RCC_LL_EC_PLLVCORANGE All PLLs VCO range + * @{ + */ +#define LL_RCC_PLLVCORANGE_WIDE (uint32_t)(0x00000000U) /* VCO output range: 192 to 836 MHz OR 128 to 544 MHz (*) */ +#define LL_RCC_PLLVCORANGE_MEDIUM (uint32_t)(0x00000001) /* VCO output range: 150 to 420 MHz */ +/** + * (*) : For stm32h7a3xx and stm32h7b3xx family lines. + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies + * @{ + */ + +/** + * @brief Helper macro to calculate the SYSCLK frequency + * @param __SYSINPUTCLKFREQ__ Frequency of the input of sys_ck (based on HSE/CSI/HSI/PLL1P) + * @param __SYSPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval SYSCLK clock frequency (in Hz) + */ +#if defined(RCC_D1CFGR_D1CPRE) +#define LL_RCC_CALC_SYSCLK_FREQ(__SYSINPUTCLKFREQ__, __SYSPRESCALER__) ((__SYSINPUTCLKFREQ__) >> ((LL_RCC_PrescTable[((__SYSPRESCALER__) & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_SYSCLK_FREQ(__SYSINPUTCLKFREQ__, __SYSPRESCALER__) ((__SYSINPUTCLKFREQ__) >> ((LL_RCC_PrescTable[((__SYSPRESCALER__) & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU)) +#endif /* RCC_D1CFGR_D1CPRE */ + +/** + * @brief Helper macro to calculate the HCLK frequency + * @param __SYSCLKFREQ__ SYSCLK frequency. + * @param __HPRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + * @retval HCLK clock frequency (in Hz) + */ +#if defined(RCC_D1CFGR_HPRE) +#define LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __HPRESCALER__) ((__SYSCLKFREQ__) >> ((LL_RCC_PrescTable[((__HPRESCALER__) & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __HPRESCALER__) ((__SYSCLKFREQ__) >> ((LL_RCC_PrescTable[((__HPRESCALER__) & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)) +#endif /* RCC_D1CFGR_HPRE */ + +/** + * @brief Helper macro to calculate the PCLK1 frequency (ABP1) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB1PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#if defined(RCC_D2CFGR_D2PPRE1) +#define LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB1PRESCALER__) & RCC_D2CFGR_D2PPRE1) >> RCC_D2CFGR_D2PPRE1_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB1PRESCALER__) & RCC_CDCFGR2_CDPPRE1) >> RCC_CDCFGR2_CDPPRE1_Pos]) & 0x1FU)) +#endif /* RCC_D2CFGR_D2PPRE1 */ + +/** + * @brief Helper macro to calculate the PCLK2 frequency (ABP2) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB2PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval PCLK2 clock frequency (in Hz) + */ +#if defined(RCC_D2CFGR_D2PPRE2) +#define LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB2PRESCALER__) & RCC_D2CFGR_D2PPRE2) >> RCC_D2CFGR_D2PPRE2_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB2PRESCALER__) & RCC_CDCFGR2_CDPPRE2) >> RCC_CDCFGR2_CDPPRE2_Pos]) & 0x1FU)) +#endif /* RCC_D2CFGR_D2PPRE2 */ + +/** + * @brief Helper macro to calculate the PCLK3 frequency (APB3) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB3PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB3_DIV_1 + * @arg @ref LL_RCC_APB3_DIV_2 + * @arg @ref LL_RCC_APB3_DIV_4 + * @arg @ref LL_RCC_APB3_DIV_8 + * @arg @ref LL_RCC_APB3_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#if defined(RCC_D1CFGR_D1PPRE) +#define LL_RCC_CALC_PCLK3_FREQ(__HCLKFREQ__, __APB3PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB3PRESCALER__) & RCC_D1CFGR_D1PPRE) >> RCC_D1CFGR_D1PPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK3_FREQ(__HCLKFREQ__, __APB3PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB3PRESCALER__) & RCC_CDCFGR1_CDPPRE) >> RCC_CDCFGR1_CDPPRE_Pos]) & 0x1FU)) +#endif /* RCC_D1CFGR_D1PPRE */ + +/** + * @brief Helper macro to calculate the PCLK4 frequency (ABP4) + * @param __HCLKFREQ__ HCLK frequency + * @param __APB4PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + * @retval PCLK1 clock frequency (in Hz) + */ +#if defined(RCC_D3CFGR_D3PPRE) +#define LL_RCC_CALC_PCLK4_FREQ(__HCLKFREQ__, __APB4PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB4PRESCALER__) & RCC_D3CFGR_D3PPRE) >> RCC_D3CFGR_D3PPRE_Pos]) & 0x1FU)) +#else +#define LL_RCC_CALC_PCLK4_FREQ(__HCLKFREQ__, __APB4PRESCALER__) ((__HCLKFREQ__) >> ((LL_RCC_PrescTable[((__APB4PRESCALER__) & RCC_SRDCFGR_SRDPPRE) >> RCC_SRDCFGR_SRDPPRE_Pos]) & 0x1FU)) +#endif /* RCC_D3CFGR_D3PPRE */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable the Clock Security System. + * @note Once HSE Clock Security System is enabled it cannot be changed anymore unless + * a reset occurs or system enter in standby mode. + * @rmtoll CR CSSHSEON LL_RCC_HSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSHSEON); +} + +/** + * @brief Enable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +/** + * @brief Disable HSE external oscillator (HSE Bypass) + * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); +} + +#if defined(RCC_CR_HSEEXT) +/** + * @brief Select the Analog HSE external clock type in Bypass mode + * @rmtoll CR HSEEXT LL_RCC_HSE_SelectAnalogClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SelectAnalogClock(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); +} + +/** + * @brief Select the Digital HSE external clock type in Bypass mode + * @rmtoll CR HSEEXT LL_RCC_HSE_SelectDigitalClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SelectDigitalClock(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEEXT); +} +#endif /* RCC_CR_HSEEXT */ + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Disable HSI oscillator + * @rmtoll CR HSION LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSION); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI new divider applied and ready + * @rmtoll CR HSIDIVF LL_RCC_HSI_IsDividerReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsDividerReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIDIVF) == (RCC_CR_HSIDIVF)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_SetDivider + * @param Divider This parameter can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV1 + * @arg @ref LL_RCC_HSI_DIV2 + * @arg @ref LL_RCC_HSI_DIV4 + * @arg @ref LL_RCC_HSI_DIV8 + * @retval None. + */ +__STATIC_INLINE void LL_RCC_HSI_SetDivider(uint32_t Divider) +{ + MODIFY_REG(RCC->CR, RCC_CR_HSIDIV, Divider); +} + +/** + * @brief Get HSI divider + * @rmtoll CR HSIDIV LL_RCC_HSI_GetDivider + * @retval can be one of the following values: + * @arg @ref LL_RCC_HSI_DIV1 + * @arg @ref LL_RCC_HSI_DIV2 + * @arg @ref LL_RCC_HSI_DIV4 + * @arg @ref LL_RCC_HSI_DIV8 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetDivider(void) +{ + return (READ_BIT(RCC->CR, RCC_CR_HSIDIV)); +} + +/** + * @brief Enable HSI oscillator in Stop mode + * @rmtoll CR HSIKERON LL_RCC_HSI_EnableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_EnableStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Disable HSI oscillator in Stop mode + * @rmtoll CR HSION LL_RCC_HSI_DisableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_DisableStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON); +} + +/** + * @brief Get HSI Calibration value + * @note When HSITRIM is written, HSICAL is updated with the sum of + * HSITRIM and the factory trim value + * @rmtoll HSICFGR HSICAL LL_RCC_HSI_GetCalibration + * @retval A value between 0 and 4095 (0xFFF) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSICAL) >> RCC_HSICFGR_HSICAL_Pos); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value that is added to the HSICAL + * @note Default value is 64 (32 for Cut1.x), which, when added to the HSICAL value, + * should trim the HSI to 64 MHz +/- 1 % + * @rmtoll HSICFGR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value can be a value between 0 and 127 (63 for Cut1.x) + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + MODIFY_REG(RCC->HSICFGR, 0x3F000U, Value << 12U); + } + else + { + /* STM32H7 Rev.V */ + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, Value << RCC_HSICFGR_HSITRIM_Pos); + } +#else + MODIFY_REG(RCC->HSICFGR, RCC_HSICFGR_HSITRIM, Value << RCC_HSICFGR_HSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll HSICFGR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval A value between 0 and 127 (63 for Cut1.x) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, 0x3F000U) >> 12U); + } + else + { + /* STM32H7 Rev.V */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); + } +#else + return (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_CSI CSI + * @{ + */ + +/** + * @brief Enable CSI oscillator + * @rmtoll CR CSION LL_RCC_CSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSION); +} + +/** + * @brief Disable CSI oscillator + * @rmtoll CR CSION LL_RCC_CSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSION); +} + +/** + * @brief Check if CSI clock is ready + * @rmtoll CR CSIRDY LL_RCC_CSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CSIRDY) == (RCC_CR_CSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable CSI oscillator in Stop mode + * @rmtoll CR CSIKERON LL_RCC_CSI_EnableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_EnableStopMode(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSIKERON); +} + +/** + * @brief Disable CSI oscillator in Stop mode + * @rmtoll CR CSIKERON LL_RCC_CSI_DisableStopMode + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_DisableStopMode(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSIKERON); +} + +/** + * @brief Get CSI Calibration value + * @note When CSITRIM is written, CSICAL is updated with the sum of + * CSITRIM and the factory trim value + * @rmtoll CSICFGR CSICAL LL_RCC_CSI_GetCalibration + * @retval A value between 0 and 255 (0xFF) + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_GetCalibration(void) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, 0x3FC0000U) >> 18U); + } + else + { + /* STM32H7 Rev.V */ + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSICAL) >> RCC_CSICFGR_CSICAL_Pos); + } +#else + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSICAL) >> RCC_CSICFGR_CSICAL_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @brief Set CSI Calibration trimming + * @note user-programmable trimming value that is added to the CSICAL + * @note Default value is 16, which, when added to the CSICAL value, + * should trim the CSI to 4 MHz +/- 1 % + * @rmtoll CSICFGR CSITRIM LL_RCC_CSI_SetCalibTrimming + * @param Value can be a value between 0 and 31 + * @retval None + */ +__STATIC_INLINE void LL_RCC_CSI_SetCalibTrimming(uint32_t Value) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + MODIFY_REG(RCC->HSICFGR, 0x7C000000U, Value << 26U); + } + else + { + /* STM32H7 Rev.V */ + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, Value << RCC_CSICFGR_CSITRIM_Pos); + } +#else + MODIFY_REG(RCC->CSICFGR, RCC_CSICFGR_CSITRIM, Value << RCC_CSICFGR_CSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @brief Get CSI Calibration trimming + * @rmtoll CSICFGR CSITRIM LL_RCC_CSI_GetCalibTrimming + * @retval A value between 0 and 31 + */ +__STATIC_INLINE uint32_t LL_RCC_CSI_GetCalibTrimming(void) +{ +#if defined(RCC_VER_X) + if ((DBGMCU->IDCODE & 0xF0000000U) == 0x10000000U) + { + /* STM32H7 Rev.Y */ + return (uint32_t)(READ_BIT(RCC->HSICFGR, 0x7C000000U) >> 26U); + } + else + { + /* STM32H7 Rev.V */ + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); + } +#else + return (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); +#endif /* RCC_VER_X */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI48 HSI48 + * @{ + */ + +/** + * @brief Enable HSI48 oscillator + * @rmtoll CR HSI48ON LL_RCC_HSI48_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Disable HSI48 oscillator + * @rmtoll CR HSI48ON LL_RCC_HSI48_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI48_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSI48ON); +} + +/** + * @brief Check if HSI48 clock is ready + * @rmtoll CR HSI48RDY LL_RCC_HSI48_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == (RCC_CR_HSI48RDY)) ? 1UL : 0UL); +} + +/** + * @brief Get HSI48 Calibration value + * @note When HSI48TRIM is written, HSI48CAL is updated with the sum of + * HSI48TRIM and the factory trim value + * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration + * @retval A value between 0 and 1023 (0x3FF) + */ +__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void) +{ + return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos); +} +/** + * @} + */ + +#if defined(RCC_CR_D1CKRDY) + +/** @defgroup RCC_LL_EF_D1CLK D1CKREADY + * @{ + */ + +/** + * @brief Check if D1 clock is ready + * @rmtoll CR D1CKRDY LL_RCC_D1CK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_D1CK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_D1CKRDY) == (RCC_CR_D1CKRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ +#else + +/** @defgroup RCC_LL_EF_CPUCLK CPUCKREADY + * @{ + */ + +/** + * @brief Check if CPU clock is ready + * @rmtoll CR CPUCKRDY LL_RCC_CPUCK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CPUCK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CPUCKRDY) == (RCC_CR_CPUCKRDY)) ? 1UL : 0UL); +} +/* alias */ +#define LL_RCC_D1CK_IsReady LL_RCC_CPUCK_IsReady +/** + * @} + */ +#endif /* RCC_CR_D1CKRDY */ + +#if defined(RCC_CR_D2CKRDY) + +/** @defgroup RCC_LL_EF_D2CLK D2CKREADY + * @{ + */ + +/** + * @brief Check if D2 clock is ready + * @rmtoll CR D2CKRDY LL_RCC_D2CK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_D2CK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_D2CKRDY) == (RCC_CR_D2CKRDY)) ? 1UL : 0UL); +} +/** + * @} + */ +#else + +/** @defgroup RCC_LL_EF_CDCLK CDCKREADY + * @{ + */ + +/** + * @brief Check if CD clock is ready + * @rmtoll CR CDCKRDY LL_RCC_CDCK_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_CDCK_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_CDCKRDY) == (RCC_CR_CDCKRDY)) ? 1UL : 0UL); +} +#define LL_RCC_D2CK_IsReady LL_RCC_CDCK_IsReady +/** + * @} + */ +#endif /* RCC_CR_D2CKRDY */ + +/** @defgroup RCC_LL_EF_SYSTEM_WIDE_RESET RESET + * @{ + */ +#if defined(RCC_GCR_WW1RSC) + +/** + * @brief Enable system wide reset for Window Watch Dog 1 + * @rmtoll GCR WW1RSC LL_RCC_WWDG1_EnableSystemReset + * @retval None. + */ +__STATIC_INLINE void LL_RCC_WWDG1_EnableSystemReset(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_WW1RSC); +} + +/** + * @brief Check if Window Watch Dog 1 reset is system wide + * @rmtoll GCR WW1RSC LL_RCC_WWDG1_IsSystemReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_WWDG1_IsSystemReset(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_WW1RSC) == RCC_GCR_WW1RSC) ? 1UL : 0UL); +} +#endif /* RCC_GCR_WW1RSC */ + +#if defined(DUAL_CORE) +/** + * @brief Enable system wide reset for Window Watch Dog 2 + * @rmtoll GCR WW1RSC LL_RCC_WWDG2_EnableSystemReset + * @retval None. + */ +__STATIC_INLINE void LL_RCC_WWDG2_EnableSystemReset(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_WW2RSC); +} + +/** + * @brief Check if Window Watch Dog 2 reset is system wide + * @rmtoll GCR WW2RSC LL_RCC_WWDG2_IsSystemReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_WWDG2_IsSystemReset(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_WW2RSC) == RCC_GCR_WW2RSC) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup RCC_LL_EF_BOOT_CPU CPU + * @{ + */ + +/** + * @brief Force CM4 boot (if hold by option byte BCM4 = 0) + * @rmtoll GCR BOOT_C2 LL_RCC_ForceCM4Boot + * @retval None. + */ +__STATIC_INLINE void LL_RCC_ForceCM4Boot(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_BOOT_C2); +} + +/** + * @brief Check if CM4 boot is forced + * @rmtoll GCR BOOT_C2 LL_RCC_IsCM4BootForced + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsCM4BootForced(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_BOOT_C2) == RCC_GCR_BOOT_C2) ? 1UL : 0UL); +} + +/** + * @brief Force CM7 boot (if hold by option byte BCM7 = 0) + * @rmtoll GCR BOOT_C1 LL_RCC_ForceCM7Boot + * @retval None. + */ +__STATIC_INLINE void LL_RCC_ForceCM7Boot(void) +{ + SET_BIT(RCC->GCR, RCC_GCR_BOOT_C1); +} + +/** + * @brief Check if CM7 boot is forced + * @rmtoll GCR BOOT_C1 LL_RCC_IsCM7BootForced + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsCM7BootForced(void) +{ + return ((READ_BIT(RCC->GCR, RCC_GCR_BOOT_C1) == RCC_GCR_BOOT_C1) ? 1UL : 0UL); +} + +/** + * @} + */ +#endif /*DUAL_CORE*/ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable the Clock Security System on LSE. + * @note Once LSE Clock Security System is enabled it cannot be changed anymore unless + * a clock failure is detected. + * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON); +} + +/** + * @brief Check if LSE failure is detected by Clock Security System + * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsFailureDetected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsFailureDetected(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD)) ? 1UL : 0UL); +} + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll BDCR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); +} + +#if defined(RCC_BDCR_LSEEXT) +/** + * @brief Enable Low-speed external DIGITAL clock type in Bypass mode (not to be used if RTC is active). + * @note The external clock must be enabled with the LSEON bit, to be used by the device. + * The LSEEXT bit can be written only if the LSE oscillator is disabled. + * @rmtoll BDCR LSEEXT LL_RCC_LSE_SelectDigitalClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SelectDigitalClock(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); +} + +/** + * @brief Enable Low-speed external ANALOG clock type in Bypass mode (default after Backup domain reset). + * @note The external clock must be enabled with the LSEON bit, to be used by the device. + * The LSEEXT bit can be written only if the LSE oscillator is disabled. + * @rmtoll BDCR LSEEXT LL_RCC_LSE_SelectAnalogClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SelectAnalogClock(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEEXT); +} +#endif /* RCC_BDCR_LSEEXT */ + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV)); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CSR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CSR, RCC_CSR_LSION); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_System System + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CFGR SW LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_CSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL1 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source); +} + +/** + * @brief Get the system clock source + * @rmtoll CFGR SWS LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_CSI + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE + * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL1 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)); +} + +/** + * @brief Configure the system wakeup clock source + * @rmtoll CFGR STOPWUCK LL_RCC_SetSysWakeUpClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysWakeUpClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, Source); +} + +/** + * @brief Get the system wakeup clock source + * @rmtoll CFGR STOPWUCK LL_RCC_GetSysWakeUpClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_SYSWAKEUP_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysWakeUpClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPWUCK)); +} + +/** + * @brief Configure the kernel wakeup clock source + * @rmtoll CFGR STOPKERWUCK LL_RCC_SetKerWakeUpClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetKerWakeUpClkSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPKERWUCK, Source); +} + +/** + * @brief Get the kernel wakeup clock source + * @rmtoll CFGR STOPKERWUCK LL_RCC_GetKerWakeUpClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_HSI + * @arg @ref LL_RCC_KERWAKEUP_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetKerWakeUpClkSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPKERWUCK)); +} + +/** + * @brief Set System prescaler + * @rmtoll D1CFGR/CDCFGR1 D1CPRE/CDCPRE LL_RCC_SetSysPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysPrescaler(uint32_t Prescaler) +{ +#if defined(RCC_D1CFGR_D1CPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1CPRE, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDCPRE, Prescaler); +#endif /* RCC_D1CFGR_D1CPRE */ +} + +/** + * @brief Set AHB prescaler + * @rmtoll D1CFGR/CDCFGR1 HPRE LL_RCC_SetAHBPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler) +{ +#if defined(RCC_D1CFGR_HPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_HPRE, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_HPRE, Prescaler); +#endif /* RCC_D1CFGR_HPRE */ +} + +/** + * @brief Set APB1 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE1/CDPPRE1 LL_RCC_SetAPB1Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D2CFGR_D2PPRE1) + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1, Prescaler); +#endif /* RCC_D2CFGR_D2PPRE1 */ +} + +/** + * @brief Set APB2 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE2/CDPPRE2 LL_RCC_SetAPB2Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D2CFGR_D2PPRE2) + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2, Prescaler); +#endif /* RCC_D2CFGR_D2PPRE2 */ +} + +/** + * @brief Set APB3 prescaler + * @rmtoll D1CFGR/CDCFGR1 D1PPRE/CDPPRE LL_RCC_SetAPB3Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB3_DIV_1 + * @arg @ref LL_RCC_APB3_DIV_2 + * @arg @ref LL_RCC_APB3_DIV_4 + * @arg @ref LL_RCC_APB3_DIV_8 + * @arg @ref LL_RCC_APB3_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB3Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D1CFGR_D1PPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1PPRE, Prescaler); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE, Prescaler); +#endif /* RCC_D1CFGR_D1PPRE */ +} + +/** + * @brief Set APB4 prescaler + * @rmtoll D3CFGR/SRDCFGR D3PPRE/SRDPPRE LL_RCC_SetAPB4Prescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetAPB4Prescaler(uint32_t Prescaler) +{ +#if defined(RCC_D3CFGR_D3PPRE) + MODIFY_REG(RCC->D3CFGR, RCC_D3CFGR_D3PPRE, Prescaler); +#else + MODIFY_REG(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE, Prescaler); +#endif /* RCC_D3CFGR_D3PPRE */ +} + +/** + * @brief Get System prescaler + * @rmtoll D1CFGR/CDCFGR1 D1CPRE/CDCPRE LL_RCC_GetSysPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYSCLK_DIV_1 + * @arg @ref LL_RCC_SYSCLK_DIV_2 + * @arg @ref LL_RCC_SYSCLK_DIV_4 + * @arg @ref LL_RCC_SYSCLK_DIV_8 + * @arg @ref LL_RCC_SYSCLK_DIV_16 + * @arg @ref LL_RCC_SYSCLK_DIV_64 + * @arg @ref LL_RCC_SYSCLK_DIV_128 + * @arg @ref LL_RCC_SYSCLK_DIV_256 + * @arg @ref LL_RCC_SYSCLK_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysPrescaler(void) +{ +#if defined(RCC_D1CFGR_D1CPRE) + return (uint32_t)(READ_BIT(RCC->D1CFGR, RCC_D1CFGR_D1CPRE)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR1, RCC_CDCFGR1_CDCPRE)); +#endif /* RCC_D1CFGR_D1CPRE */ +} + +/** + * @brief Get AHB prescaler + * @rmtoll D1CFGR/ CDCFGR1 HPRE LL_RCC_GetAHBPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_AHB_DIV_1 + * @arg @ref LL_RCC_AHB_DIV_2 + * @arg @ref LL_RCC_AHB_DIV_4 + * @arg @ref LL_RCC_AHB_DIV_8 + * @arg @ref LL_RCC_AHB_DIV_16 + * @arg @ref LL_RCC_AHB_DIV_64 + * @arg @ref LL_RCC_AHB_DIV_128 + * @arg @ref LL_RCC_AHB_DIV_256 + * @arg @ref LL_RCC_AHB_DIV_512 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void) +{ +#if defined(RCC_D1CFGR_HPRE) + return (uint32_t)(READ_BIT(RCC->D1CFGR, RCC_D1CFGR_HPRE)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR1, RCC_CDCFGR1_HPRE)); +#endif /* RCC_D1CFGR_HPRE */ +} + +/** + * @brief Get APB1 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE1/CDPPRE1 LL_RCC_GetAPB1Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB1_DIV_1 + * @arg @ref LL_RCC_APB1_DIV_2 + * @arg @ref LL_RCC_APB1_DIV_4 + * @arg @ref LL_RCC_APB1_DIV_8 + * @arg @ref LL_RCC_APB1_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void) +{ +#if defined(RCC_D2CFGR_D2PPRE1) + return (uint32_t)(READ_BIT(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1)); +#endif /* RCC_D2CFGR_D2PPRE1 */ +} + +/** + * @brief Get APB2 prescaler + * @rmtoll D2CFGR/CDCFGR2 D2PPRE2/CDPPRE2 LL_RCC_GetAPB2Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB2_DIV_1 + * @arg @ref LL_RCC_APB2_DIV_2 + * @arg @ref LL_RCC_APB2_DIV_4 + * @arg @ref LL_RCC_APB2_DIV_8 + * @arg @ref LL_RCC_APB2_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void) +{ +#if defined(RCC_D2CFGR_D2PPRE2) + return (uint32_t)(READ_BIT(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2)); +#endif /* RCC_D2CFGR_D2PPRE2 */ +} + +/** + * @brief Get APB3 prescaler + * @rmtoll D1CFGR/CDCFGR1 D1PPRE/CDPPRE LL_RCC_GetAPB3Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB3_DIV_1 + * @arg @ref LL_RCC_APB3_DIV_2 + * @arg @ref LL_RCC_APB3_DIV_4 + * @arg @ref LL_RCC_APB3_DIV_8 + * @arg @ref LL_RCC_APB3_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB3Prescaler(void) +{ +#if defined(RCC_D1CFGR_D1PPRE) + return (uint32_t)(READ_BIT(RCC->D1CFGR, RCC_D1CFGR_D1PPRE)); +#else + return (uint32_t)(READ_BIT(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE)); +#endif /* RCC_D1CFGR_D1PPRE */ +} + +/** + * @brief Get APB4 prescaler + * @rmtoll D3CFGR/SRDCFGR D3PPRE/SRDPPRE LL_RCC_GetAPB4Prescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_APB4_DIV_1 + * @arg @ref LL_RCC_APB4_DIV_2 + * @arg @ref LL_RCC_APB4_DIV_4 + * @arg @ref LL_RCC_APB4_DIV_8 + * @arg @ref LL_RCC_APB4_DIV_16 + */ +__STATIC_INLINE uint32_t LL_RCC_GetAPB4Prescaler(void) +{ +#if defined(RCC_D3CFGR_D3PPRE) + return (uint32_t)(READ_BIT(RCC->D3CFGR, RCC_D3CFGR_D3PPRE)); +#else + return (uint32_t)(READ_BIT(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE)); +#endif /* RCC_D3CFGR_D3PPRE */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_MCO MCO + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCO1 LL_RCC_ConfigMCO\n + * CFGR MCO1PRE LL_RCC_ConfigMCO\n + * CFGR MCO2 LL_RCC_ConfigMCO\n + * CFGR MCO2PRE LL_RCC_ConfigMCO + * @param MCOxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1SOURCE_HSI + * @arg @ref LL_RCC_MCO1SOURCE_LSE + * @arg @ref LL_RCC_MCO1SOURCE_HSE + * @arg @ref LL_RCC_MCO1SOURCE_PLL1QCLK + * @arg @ref LL_RCC_MCO1SOURCE_HSI48 + * @arg @ref LL_RCC_MCO2SOURCE_SYSCLK + * @arg @ref LL_RCC_MCO2SOURCE_PLL2PCLK + * @arg @ref LL_RCC_MCO2SOURCE_HSE + * @arg @ref LL_RCC_MCO2SOURCE_PLL1PCLK + * @arg @ref LL_RCC_MCO2SOURCE_CSI + * @arg @ref LL_RCC_MCO2SOURCE_LSI + * @param MCOxPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO1_DIV_1 + * @arg @ref LL_RCC_MCO1_DIV_2 + * @arg @ref LL_RCC_MCO1_DIV_3 + * @arg @ref LL_RCC_MCO1_DIV_4 + * @arg @ref LL_RCC_MCO1_DIV_5 + * @arg @ref LL_RCC_MCO1_DIV_6 + * @arg @ref LL_RCC_MCO1_DIV_7 + * @arg @ref LL_RCC_MCO1_DIV_8 + * @arg @ref LL_RCC_MCO1_DIV_9 + * @arg @ref LL_RCC_MCO1_DIV_10 + * @arg @ref LL_RCC_MCO1_DIV_11 + * @arg @ref LL_RCC_MCO1_DIV_12 + * @arg @ref LL_RCC_MCO1_DIV_13 + * @arg @ref LL_RCC_MCO1_DIV_14 + * @arg @ref LL_RCC_MCO1_DIV_15 + * @arg @ref LL_RCC_MCO2_DIV_1 + * @arg @ref LL_RCC_MCO2_DIV_2 + * @arg @ref LL_RCC_MCO2_DIV_3 + * @arg @ref LL_RCC_MCO2_DIV_4 + * @arg @ref LL_RCC_MCO2_DIV_5 + * @arg @ref LL_RCC_MCO2_DIV_6 + * @arg @ref LL_RCC_MCO2_DIV_7 + * @arg @ref LL_RCC_MCO2_DIV_8 + * @arg @ref LL_RCC_MCO2_DIV_9 + * @arg @ref LL_RCC_MCO2_DIV_10 + * @arg @ref LL_RCC_MCO2_DIV_11 + * @arg @ref LL_RCC_MCO2_DIV_12 + * @arg @ref LL_RCC_MCO2_DIV_13 + * @arg @ref LL_RCC_MCO2_DIV_14 + * @arg @ref LL_RCC_MCO2_DIV_15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler) +{ + MODIFY_REG(RCC->CFGR, (MCOxSource << 16U) | (MCOxPrescaler << 16U), (MCOxSource & 0xFFFF0000U) | (MCOxPrescaler & 0xFFFF0000U)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure periph clock source + * @rmtoll D2CCIP1R/CDCCIP1R * LL_RCC_SetClockSource\n + * D2CCIP2R/CDCCIP2R * LL_RCC_SetClockSource\n + * D3CCIPR/SRDCCIPR * LL_RCC_SetClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_FMCSEL) + uint32_t *pReg = (uint32_t *)((uint32_t)&RCC->D1CCIPR + LL_CLKSOURCE_REG(ClkSource)); +#else + uint32_t *pReg = (uint32_t *)((uint32_t)&RCC->CDCCIPR + LL_CLKSOURCE_REG(ClkSource)); +#endif /* */ + MODIFY_REG(*pReg, LL_CLKSOURCE_MASK(ClkSource), LL_CLKSOURCE_CONFIG(ClkSource)); +} + +/** + * @brief Configure USARTx clock source + * @rmtoll D2CCIP2R / D2CCIP2R USART16SEL LL_RCC_SetUSARTClockSource\n + * D2CCIP2R / D2CCIP2R USART28SEL LL_RCC_SetUSARTClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure LPUARTx clock source + * @rmtoll D3CCIPR / SRDCCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D3CCIPR_LPUART1SEL) + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL, ClkSource); +#else + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL, ClkSource); +#endif /* RCC_D3CCIPR_LPUART1SEL */ +} + +/** + * @brief Configure I2Cx clock source + * @rmtoll D2CCIP2R / CDCCIP2R I2C123SEL LL_RCC_SetI2CClockSource\n + * D3CCIPR / SRDCCIPR I2C4SEL LL_RCC_SetI2CClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure LPTIMx clock source + * @rmtoll D2CCIP2R / CDCCIP2R LPTIM1SEL LL_RCC_SetLPTIMClockSource + * D3CCIPR / SRDCCIPR LPTIM2SEL LL_RCC_SetLPTIMClockSource\n + * D3CCIPR / SRDCCIPR LPTIM345SEL LL_RCC_SetLPTIMClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SAIx clock source + * @rmtoll D2CCIP1R / CDCCIP1R SAI1SEL LL_RCC_SetSAIClockSource\n + * D2CCIP1R / CDCCIP1R SAI23SEL LL_RCC_SetSAIClockSource + * D3CCIPR / SRDCCIPR SAI4ASEL LL_RCC_SetSAI4xClockSource\n + * D3CCIPR / SRDCCIPR SAI4BSEL LL_RCC_SetSAI4xClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SDMMCx clock source + * @rmtoll D1CCIPR / CDCCIPR SDMMCSEL LL_RCC_SetSDMMCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2R + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_SDMMCSEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL, ClkSource); +#endif /* RCC_D1CCIPR_SDMMCSEL */ +} + +/** + * @brief Configure RNGx clock source + * @rmtoll D2CCIP2R / CDCCIP2R RNGSEL LL_RCC_SetRNGClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSE + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP2R_RNGSEL) + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL, ClkSource); +#endif /* RCC_D2CCIP2R_RNGSEL */ +} + +/** + * @brief Configure USBx clock source + * @rmtoll D2CCIP2R / CDCCIP2R USBSEL LL_RCC_SetUSBClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_DISABLE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP2R_USBSEL) + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL, ClkSource); +#endif /* RCC_D2CCIP2R_USBSEL */ +} + +/** + * @brief Configure CECx clock source + * @rmtoll D2CCIP2R / CDCCIP2R CECSEL LL_RCC_SetCECClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSI + * @arg @ref LL_RCC_CEC_CLKSOURCE_CSI_DIV122 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCECClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP2R_CECSEL) + MODIFY_REG(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL, ClkSource); +#endif /* RCC_D2CCIP2R_CECSEL */ +} + +#if defined(DSI) +/** + * @brief Configure DSIx clock source + * @rmtoll D1CCIPR DSISEL LL_RCC_SetDSIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL2Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL, ClkSource); +} +#endif /* DSI */ + +/** + * @brief Configure DFSDMx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R DFSDM1SEL LL_RCC_SetDFSDMClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_DFSDM1SEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL, ClkSource); +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +} + +#if defined(DFSDM2_BASE) +/** + * @brief Configure DFSDMx Kernel clock source + * @rmtoll SRDCCIPR DFSDM2SEL LL_RCC_SetDFSDM2ClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDFSDM2ClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL, ClkSource); +} +#endif /* DFSDM2_BASE */ + +/** + * @brief Configure FMCx Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR FMCSEL LL_RCC_SetFMCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE_HCLK + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_FMC_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFMCClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_FMCSEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL, ClkSource); +#endif /* RCC_D1CCIPR_FMCSEL */ +} + +#if defined(QUADSPI) +/** + * @brief Configure QSPIx Kernel clock source + * @rmtoll D1CCIPR QSPISEL LL_RCC_SetQSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_QSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_QSPI_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetQSPIClockSource(uint32_t ClkSource) +{ + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL, ClkSource); +} +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** + * @brief Configure OSPIx Kernel clock source + * @rmtoll D1CCIPR OPISEL LL_RCC_SetOSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_OSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_OSPI_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetOSPIClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_OCTOSPISEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL, ClkSource); +#endif /* RCC_D1CCIPR_OCTOSPISEL */ +} +#endif /* OCTOSPI1 || OCTOSPI2 */ + +/** + * @brief Configure CLKP Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR CKPERSEL LL_RCC_SetCLKPClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_CSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetCLKPClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D1CCIPR_CKPERSEL) + MODIFY_REG(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL, ClkSource); +#endif /* RCC_D1CCIPR_CKPERSEL */ +} + +/** + * @brief Configure SPIx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPI123SEL LL_RCC_SetSPIClockSource\n + * D2CCIP1R / CDCCIP1R SPI45SEL LL_RCC_SetSPIClockSource\n + * D3CCIPR / SRDCCIPR SPI6SEL LL_RCC_SetSPIClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPIClockSource(uint32_t ClkSource) +{ + LL_RCC_SetClockSource(ClkSource); +} + +/** + * @brief Configure SPDIFx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPDIFSEL LL_RCC_SetSPDIFClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPDIFClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_SPDIFSEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL, ClkSource); +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +} + +/** + * @brief Configure FDCANx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R FDCANSEL LL_RCC_SetFDCANClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2Q + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetFDCANClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_FDCANSEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL, ClkSource); +#endif /* RCC_D2CCIP1R_FDCANSEL */ +} + +/** + * @brief Configure SWPx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SWPSEL LL_RCC_SetSWPClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SWP_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_SWP_CLKSOURCE_HSI + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSWPClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D2CCIP1R_SWPSEL) + MODIFY_REG(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL, ClkSource); +#else + MODIFY_REG(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL, ClkSource); +#endif /* RCC_D2CCIP1R_SWPSEL */ +} + +/** + * @brief Configure ADCx Kernel clock source + * @rmtoll D3CCIPR / SRDCCIPR ADCSEL LL_RCC_SetADCClockSource + * @param ClkSource This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_ADC_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ClkSource) +{ +#if defined(RCC_D3CCIPR_ADCSEL) + MODIFY_REG(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL, ClkSource); +#else + MODIFY_REG(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL, ClkSource); +#endif /* RCC_D3CCIPR_ADCSEL */ +} + +/** + * @brief Get periph clock source + * @rmtoll D1CCIPR / CDCCIPR * LL_RCC_GetClockSource\n + * D2CCIP1R / CDCCIP1R * LL_RCC_GetClockSource\n + * D2CCIP2R / CDCCIP2R * LL_RCC_GetClockSource\n + * D3CCIPR / SRDCCIPR * LL_RCC_GetClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @arg @ref LL_RCC_I2C123_CLKSOURCE + * @arg @ref LL_RCC_I2C4_CLKSOURCE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE + * @arg @ref LL_RCC_SAI1_CLKSOURCE + * @arg @ref LL_RCC_SAI23_CLKSOURCE + * @arg @ref LL_RCC_SAI4A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE (*) + * @arg @ref LL_RCC_SPI123_CLKSOURCE (*) + * @arg @ref LL_RCC_SPI45_CLKSOURCE (*) + * @arg @ref LL_RCC_SPI6_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all devices. + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetClockSource(uint32_t Periph) +{ +#if defined(RCC_D1CCIPR_FMCSEL) + const uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&RCC->D1CCIPR) + LL_CLKSOURCE_REG(Periph))); +#else + const uint32_t *pReg = (uint32_t *)((uint32_t)((uint32_t)(&RCC->CDCCIPR) + LL_CLKSOURCE_REG(Periph))); +#endif /* RCC_D1CCIPR_FMCSEL */ + return (uint32_t)(Periph | (((READ_BIT(*pReg, LL_CLKSOURCE_MASK(Periph))) >> LL_CLKSOURCE_SHIFT(Periph)) << LL_RCC_CONFIG_SHIFT)); +} + +/** + * @brief Get USARTx clock source + * @rmtoll D2CCIP2R / CDCCIP2R USART16SEL LL_RCC_GetUSARTClockSource\n + * D2CCIP2R / CDCCIP2R USART28SEL LL_RCC_GetUSARTClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE + * @arg @ref LL_RCC_USART234578_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USART16_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART16_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART16_CLKSOURCE_LSE + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USART234578_CLKSOURCE_HSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_CSI + * @arg @ref LL_RCC_USART234578_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get LPUART clock source + * @rmtoll D3CCIPR / SRDCCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_CSI + * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D3CCIPR_LPUART1SEL) + return (uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_LPUART1SEL)); +#else + return (uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_LPUART1SEL)); +#endif /* RCC_D3CCIPR_LPUART1SEL */ +} + +/** + * @brief Get I2Cx clock source + * @rmtoll D2CCIP2R / CDCCIP2R I2C123SEL LL_RCC_GetI2CClockSource\n + * D3CCIPR / SRDCCIPR I2C4SEL LL_RCC_GetI2CClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_I2C123_CLKSOURCE + * @arg @ref LL_RCC_I2C4_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_I2C123_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C123_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C123_CLKSOURCE_CSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_I2C4_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI + * @arg @ref LL_RCC_I2C4_CLKSOURCE_CSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get LPTIM clock source + * @rmtoll D2CCIP2R / CDCCIP2R LPTIM1SEL LL_RCC_GetLPTIMClockSource\n + * D3CCIPR / SRDCCIPR LPTIM2SEL LL_RCC_GetLPTIMClockSource\n + * D3CCIPR / SRDCCIPR LPTIM345SEL LL_RCC_GetLPTIMClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_CLKP + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSE + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_LSI + * @arg @ref LL_RCC_LPTIM345_CLKSOURCE_CLKP + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SAIx clock source + * @rmtoll D2CCIP1R / CDCCIP1R SAI1SEL LL_RCC_GetSAIClockSource\n + * D2CCIP1R / CDCCIP1R SAI23SEL LL_RCC_GetSAIClockSource + * D3CCIPR / SRDCCIPR SAI4ASEL LL_RCC_GetSAIClockSource\n + * D3CCIPR / SRDCCIPR SAI4BSEL LL_RCC_GetSAIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE (*) + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SAI1_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SAI1_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI23_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2A_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI2B_CLKSOURCE_SPDIF (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4A_CLKSOURCE_CLKP (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL1Q (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL2P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_PLL3P (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_I2S_CKIN (*) + * @arg @ref LL_RCC_SAI4B_CLKSOURCE_CLKP (*) + * + * (*) value not defined in all devices. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SDMMC clock source + * @rmtoll D1CCIPR / CDCCIPR SDMMCSEL LL_RCC_GetSDMMCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SDMMC_CLKSOURCE_PLL2R + */ +__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_SDMMCSEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_SDMMCSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_SDMMCSEL)); +#endif /* RCC_D1CCIPR_SDMMCSEL */ +} + +/** + * @brief Get RNG clock source + * @rmtoll D2CCIP2R RNGSEL LL_RCC_GetRNGClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 + * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSE + * @arg @ref LL_RCC_RNG_CLKSOURCE_LSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP2R_RNGSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_RNGSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_RNGSEL)); +#endif /* RCC_D2CCIP2R_RNGSEL */ +} + +/** + * @brief Get USB clock source + * @rmtoll D2CCIP2R / CDCCIP2R USBSEL LL_RCC_GetUSBClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_USB_CLKSOURCE_DISABLE + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_USB_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 + */ +__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP2R_USBSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_USBSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_USBSEL)); +#endif /* RCC_D2CCIP2R_USBSEL */ +} + +/** + * @brief Get CEC clock source + * @rmtoll D2CCIP2R / CDCCIP2R CECSEL LL_RCC_GetCECClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSE + * @arg @ref LL_RCC_CEC_CLKSOURCE_LSI + * @arg @ref LL_RCC_CEC_CLKSOURCE_CSI_DIV122 + */ +__STATIC_INLINE uint32_t LL_RCC_GetCECClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP2R_CECSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP2R, RCC_D2CCIP2R_CECSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP2R, RCC_CDCCIP2R_CECSEL)); +#endif /* RCC_D2CCIP2R_CECSEL */ +} + +#if defined(DSI) +/** + * @brief Get DSI clock source + * @rmtoll D1CCIPR DSISEL LL_RCC_GetDSIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY + * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL2Q + */ +__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_DSISEL)); +} +#endif /* DSI */ + +/** + * @brief Get DFSDM Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R DFSDM1SEL LL_RCC_GetDFSDMClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_DFSDM1SEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_DFSDM1SEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_DFSDM1SEL)); +#endif /* RCC_D2CCIP1R_DFSDM1SEL */ +} + +#if defined(DFSDM2_BASE) +/** + * @brief Get DFSDM2 Kernel clock source + * @rmtoll SRDCCIPR DFSDM2SEL LL_RCC_GetDFSDM2ClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_DFSDM2_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_RCC_GetDFSDM2ClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_DFSDM2SEL)); +} +#endif /* DFSDM2_BASE */ + +/** + * @brief Get FMC Kernel clock source + * @rmtoll D1CCIPR / D1CCIPR FMCSEL LL_RCC_GetFMCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FMC_CLKSOURCE_HCLK + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FMC_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_FMC_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetFMCClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_FMCSEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_FMCSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_FMCSEL)); +#endif /* RCC_D1CCIPR_FMCSEL */ +} + +#if defined(QUADSPI) +/** + * @brief Get QSPI Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR QSPISEL LL_RCC_GetQSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_QSPI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_QSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_QSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_QSPI_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetQSPIClockSource(uint32_t Periph) +{ + UNUSED(Periph); + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_QSPISEL)); +} +#endif /* QUADSPI */ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) +/** + * @brief Get OSPI Kernel clock source + * @rmtoll CDCCIPR OSPISEL LL_RCC_GetOSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_OSPI_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_OSPI_CLKSOURCE_HCLK + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_OSPI_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_OSPI_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetOSPIClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_OCTOSPISEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_OCTOSPISEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_OCTOSPISEL)); +#endif /* RCC_D1CCIPR_OCTOSPISEL */ +} +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ + +/** + * @brief Get CLKP Kernel clock source + * @rmtoll D1CCIPR / CDCCIPR CKPERSEL LL_RCC_GetCLKPClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_CSI + * @arg @ref LL_RCC_CLKP_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetCLKPClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D1CCIPR_CKPERSEL) + return (uint32_t)(READ_BIT(RCC->D1CCIPR, RCC_D1CCIPR_CKPERSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIPR, RCC_CDCCIPR_CKPERSEL)); +#endif /* RCC_D1CCIPR_CKPERSEL */ +} + +/** + * @brief Get SPIx Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPI123SEL LL_RCC_GetSPIClockSource\n + * D2CCIP1R / CDCCIP1R SPI45SEL LL_RCC_GetSPIClockSource\n + * D3CCIPR / SRDCCIPR SPI6SEL LL_RCC_GetSPIClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI123_CLKSOURCE + * @arg @ref LL_RCC_SPI45_CLKSOURCE + * @arg @ref LL_RCC_SPI6_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_PLL3P + * @arg @ref LL_RCC_SPI123_CLKSOURCE_I2S_CKIN + * @arg @ref LL_RCC_SPI123_CLKSOURCE_CLKP + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PCLK2 + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI45_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PCLK4 + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL2Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_PLL3Q + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_CSI + * @arg @ref LL_RCC_SPI6_CLKSOURCE_HSE + * @arg @ref LL_RCC_SPI6_CLKSOURCE_I2S_CKIN (*) + * + * (*) value not defined in all stm32h7xx lines. + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPIClockSource(uint32_t Periph) +{ + return LL_RCC_GetClockSource(Periph); +} + +/** + * @brief Get SPDIF Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SPDIFSEL LL_RCC_GetSPDIFClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SPDIF_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL2R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_SPDIF_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPDIFClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_SPDIFSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SPDIFSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SPDIFSEL)); +#endif /* RCC_D2CCIP1R_SPDIFSEL */ +} + +/** + * @brief Get FDCAN Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R FDCANSEL LL_RCC_GetFDCANClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_HSE + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL1Q + * @arg @ref LL_RCC_FDCAN_CLKSOURCE_PLL2Q + */ +__STATIC_INLINE uint32_t LL_RCC_GetFDCANClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_FDCANSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_FDCANSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_FDCANSEL)); +#endif /* RCC_D2CCIP1R_FDCANSEL */ +} + +/** + * @brief Get SWP Kernel clock source + * @rmtoll D2CCIP1R / CDCCIP1R SWPSEL LL_RCC_GetSWPClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_SWP_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SWP_CLKSOURCE_PCLK1 + * @arg @ref LL_RCC_SWP_CLKSOURCE_HSI + */ +__STATIC_INLINE uint32_t LL_RCC_GetSWPClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined(RCC_D2CCIP1R_SWPSEL) + return (uint32_t)(READ_BIT(RCC->D2CCIP1R, RCC_D2CCIP1R_SWPSEL)); +#else + return (uint32_t)(READ_BIT(RCC->CDCCIP1R, RCC_CDCCIP1R_SWPSEL)); +#endif /* RCC_D2CCIP1R_SWPSEL */ +} + +/** + * @brief Get ADC Kernel clock source + * @rmtoll D3CCIPR / SRDCCIPR ADCSEL LL_RCC_GetADCClockSource + * @param Periph This parameter can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL2P + * @arg @ref LL_RCC_ADC_CLKSOURCE_PLL3R + * @arg @ref LL_RCC_ADC_CLKSOURCE_CLKP + */ +__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t Periph) +{ + UNUSED(Periph); +#if defined (RCC_D3CCIPR_ADCSEL) + return (uint32_t)(READ_BIT(RCC->D3CCIPR, RCC_D3CCIPR_ADCSEL)); +#else + return (uint32_t)(READ_BIT(RCC->SRDCCIPR, RCC_SRDCCIPR_ADCSEL)); +#endif /* RCC_D3CCIPR_ADCSEL */ +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Set RTC Clock Source + * @note Once the RTC clock source has been selected, it cannot be changed anymore unless + * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is + * set). The BDRST bit can be used to reset them. + * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source); +} + +/** + * @brief Get RTC Clock Source + * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE + * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI + * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)); +} + +/** + * @brief Enable RTC + * @rmtoll BDCR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll BDCR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @brief Force the Backup domain reset + * @rmtoll BDCR BDRST / VSWRST LL_RCC_ForceBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_BDRST); +} + +/** + * @brief Release the Backup domain reset + * @rmtoll BDCR BDRST / VSWRST LL_RCC_ReleaseBackupDomainReset + * @retval None + */ +__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void) +{ +#if defined(RCC_BDCR_BDRST) + CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST); +#else + CLEAR_BIT(RCC->BDCR, RCC_BDCR_VSWRST); +#endif /* RCC_BDCR_BDRST */ +} + +/** + * @brief Set HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_SetRTC_HSEPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @arg @ref LL_RCC_RTC_HSE_DIV_32 + * @arg @ref LL_RCC_RTC_HSE_DIV_33 + * @arg @ref LL_RCC_RTC_HSE_DIV_34 + * @arg @ref LL_RCC_RTC_HSE_DIV_35 + * @arg @ref LL_RCC_RTC_HSE_DIV_36 + * @arg @ref LL_RCC_RTC_HSE_DIV_37 + * @arg @ref LL_RCC_RTC_HSE_DIV_38 + * @arg @ref LL_RCC_RTC_HSE_DIV_39 + * @arg @ref LL_RCC_RTC_HSE_DIV_40 + * @arg @ref LL_RCC_RTC_HSE_DIV_41 + * @arg @ref LL_RCC_RTC_HSE_DIV_42 + * @arg @ref LL_RCC_RTC_HSE_DIV_43 + * @arg @ref LL_RCC_RTC_HSE_DIV_44 + * @arg @ref LL_RCC_RTC_HSE_DIV_45 + * @arg @ref LL_RCC_RTC_HSE_DIV_46 + * @arg @ref LL_RCC_RTC_HSE_DIV_47 + * @arg @ref LL_RCC_RTC_HSE_DIV_48 + * @arg @ref LL_RCC_RTC_HSE_DIV_49 + * @arg @ref LL_RCC_RTC_HSE_DIV_50 + * @arg @ref LL_RCC_RTC_HSE_DIV_51 + * @arg @ref LL_RCC_RTC_HSE_DIV_52 + * @arg @ref LL_RCC_RTC_HSE_DIV_53 + * @arg @ref LL_RCC_RTC_HSE_DIV_54 + * @arg @ref LL_RCC_RTC_HSE_DIV_55 + * @arg @ref LL_RCC_RTC_HSE_DIV_56 + * @arg @ref LL_RCC_RTC_HSE_DIV_57 + * @arg @ref LL_RCC_RTC_HSE_DIV_58 + * @arg @ref LL_RCC_RTC_HSE_DIV_59 + * @arg @ref LL_RCC_RTC_HSE_DIV_60 + * @arg @ref LL_RCC_RTC_HSE_DIV_61 + * @arg @ref LL_RCC_RTC_HSE_DIV_62 + * @arg @ref LL_RCC_RTC_HSE_DIV_63 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRTC_HSEPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, Prescaler); +} + +/** + * @brief Get HSE Prescalers for RTC Clock + * @rmtoll CFGR RTCPRE LL_RCC_GetRTC_HSEPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RTC_NOCLOCK + * @arg @ref LL_RCC_RTC_HSE_DIV_2 + * @arg @ref LL_RCC_RTC_HSE_DIV_3 + * @arg @ref LL_RCC_RTC_HSE_DIV_4 + * @arg @ref LL_RCC_RTC_HSE_DIV_5 + * @arg @ref LL_RCC_RTC_HSE_DIV_6 + * @arg @ref LL_RCC_RTC_HSE_DIV_7 + * @arg @ref LL_RCC_RTC_HSE_DIV_8 + * @arg @ref LL_RCC_RTC_HSE_DIV_9 + * @arg @ref LL_RCC_RTC_HSE_DIV_10 + * @arg @ref LL_RCC_RTC_HSE_DIV_11 + * @arg @ref LL_RCC_RTC_HSE_DIV_12 + * @arg @ref LL_RCC_RTC_HSE_DIV_13 + * @arg @ref LL_RCC_RTC_HSE_DIV_14 + * @arg @ref LL_RCC_RTC_HSE_DIV_15 + * @arg @ref LL_RCC_RTC_HSE_DIV_16 + * @arg @ref LL_RCC_RTC_HSE_DIV_17 + * @arg @ref LL_RCC_RTC_HSE_DIV_18 + * @arg @ref LL_RCC_RTC_HSE_DIV_19 + * @arg @ref LL_RCC_RTC_HSE_DIV_20 + * @arg @ref LL_RCC_RTC_HSE_DIV_21 + * @arg @ref LL_RCC_RTC_HSE_DIV_22 + * @arg @ref LL_RCC_RTC_HSE_DIV_23 + * @arg @ref LL_RCC_RTC_HSE_DIV_24 + * @arg @ref LL_RCC_RTC_HSE_DIV_25 + * @arg @ref LL_RCC_RTC_HSE_DIV_26 + * @arg @ref LL_RCC_RTC_HSE_DIV_27 + * @arg @ref LL_RCC_RTC_HSE_DIV_28 + * @arg @ref LL_RCC_RTC_HSE_DIV_29 + * @arg @ref LL_RCC_RTC_HSE_DIV_30 + * @arg @ref LL_RCC_RTC_HSE_DIV_31 + * @arg @ref LL_RCC_RTC_HSE_DIV_32 + * @arg @ref LL_RCC_RTC_HSE_DIV_33 + * @arg @ref LL_RCC_RTC_HSE_DIV_34 + * @arg @ref LL_RCC_RTC_HSE_DIV_35 + * @arg @ref LL_RCC_RTC_HSE_DIV_36 + * @arg @ref LL_RCC_RTC_HSE_DIV_37 + * @arg @ref LL_RCC_RTC_HSE_DIV_38 + * @arg @ref LL_RCC_RTC_HSE_DIV_39 + * @arg @ref LL_RCC_RTC_HSE_DIV_40 + * @arg @ref LL_RCC_RTC_HSE_DIV_41 + * @arg @ref LL_RCC_RTC_HSE_DIV_42 + * @arg @ref LL_RCC_RTC_HSE_DIV_43 + * @arg @ref LL_RCC_RTC_HSE_DIV_44 + * @arg @ref LL_RCC_RTC_HSE_DIV_45 + * @arg @ref LL_RCC_RTC_HSE_DIV_46 + * @arg @ref LL_RCC_RTC_HSE_DIV_47 + * @arg @ref LL_RCC_RTC_HSE_DIV_48 + * @arg @ref LL_RCC_RTC_HSE_DIV_49 + * @arg @ref LL_RCC_RTC_HSE_DIV_50 + * @arg @ref LL_RCC_RTC_HSE_DIV_51 + * @arg @ref LL_RCC_RTC_HSE_DIV_52 + * @arg @ref LL_RCC_RTC_HSE_DIV_53 + * @arg @ref LL_RCC_RTC_HSE_DIV_54 + * @arg @ref LL_RCC_RTC_HSE_DIV_55 + * @arg @ref LL_RCC_RTC_HSE_DIV_56 + * @arg @ref LL_RCC_RTC_HSE_DIV_57 + * @arg @ref LL_RCC_RTC_HSE_DIV_58 + * @arg @ref LL_RCC_RTC_HSE_DIV_59 + * @arg @ref LL_RCC_RTC_HSE_DIV_60 + * @arg @ref LL_RCC_RTC_HSE_DIV_61 + * @arg @ref LL_RCC_RTC_HSE_DIV_62 + * @arg @ref LL_RCC_RTC_HSE_DIV_63 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRTC_HSEPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_TIM_CLOCK_PRESCALER TIM + * @{ + */ + +/** + * @brief Set Timers Clock Prescalers + * @rmtoll CFGR TIMPRE LL_RCC_SetTIMPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_TWICE + * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetTIMPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_TIMPRE, Prescaler); +} + +/** + * @brief Get Timers Clock Prescalers + * @rmtoll CFGR TIMPRE LL_RCC_GetTIMPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_TIM_PRESCALER_TWICE + * @arg @ref LL_RCC_TIM_PRESCALER_FOUR_TIMES + */ +__STATIC_INLINE uint32_t LL_RCC_GetTIMPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_TIMPRE)); +} + +/** + * @} + */ + +#if defined(HRTIM1) +/** @defgroup RCC_LL_EF_HRTIM_SET_CLOCK_SOURCE HRTIM + * @{ + */ + +/** + * @brief Set High Resolution Timers Clock Source + * @rmtoll CFGR HRTIMSEL LL_RCC_SetHRTIMClockSource + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_TIM + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_CPU + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetHRTIMClockSource(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_HRTIMSEL, Prescaler); +} +#endif /* HRTIM1 */ + +#if defined(HRTIM1) +/** + * @brief Get High Resolution Timers Clock Source + * @rmtoll CFGR HRTIMSEL LL_RCC_GetHRTIMClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_TIM + * @arg @ref LL_RCC_HRTIM_CLKSOURCE_CPU + */ +__STATIC_INLINE uint32_t LL_RCC_GetHRTIMClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HRTIMSEL)); +} +/** + * @} + */ +#endif /* HRTIM1 */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Set the oscillator used as PLL clock source. + * @note PLLSRC can be written only when All PLLs are disabled. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL_SetSource + * @param PLLSource parameter can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL_SetSource(uint32_t PLLSource) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC, PLLSource); +} + +/** + * @brief Get the oscillator used as PLL clock source. + * @rmtoll PLLCKSELR PLLSRC LL_RCC_PLL_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_PLLSOURCE_HSI + * @arg @ref LL_RCC_PLLSOURCE_CSI + * @arg @ref LL_RCC_PLLSOURCE_HSE + * @arg @ref LL_RCC_PLLSOURCE_NONE + */ +__STATIC_INLINE uint32_t LL_RCC_PLL_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_PLLSRC)); +} + +/** + * @brief Enable PLL1 + * @rmtoll CR PLL1ON LL_RCC_PLL1_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL1ON); +} + +/** + * @brief Disable PLL1 + * @note Cannot be disabled if the PLL1 clock is used as the system clock + * @rmtoll CR PLL1ON LL_RCC_PLL1_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON); +} + +/** + * @brief Check if PLL1 Ready + * @rmtoll CR PLL1RDY LL_RCC_PLL1_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL1RDY) == (RCC_CR_PLL1RDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL1P + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVP1EN LL_RCC_PLL1P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP1EN); +} + +/** + * @brief Enable PLL1Q + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVQ1EN LL_RCC_PLL1Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ1EN); +} + +/** + * @brief Enable PLL1R + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVR1EN LL_RCC_PLL1R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR1EN); +} + +/** + * @brief Enable PLL1 FRACN + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN); +} + +/** + * @brief Check if PLL1 P is enabled + * @rmtoll PLLCFGR DIVP1EN LL_RCC_PLL1P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP1EN) == RCC_PLLCFGR_DIVP1EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 Q is enabled + * @rmtoll PLLCFGR DIVQ1EN LL_RCC_PLL1Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ1EN) == RCC_PLLCFGR_DIVQ1EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 R is enabled + * @rmtoll PLLCFGR DIVR1EN LL_RCC_PLL1R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR1EN) == RCC_PLLCFGR_DIVR1EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 FRACN is enabled + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN) == RCC_PLLCFGR_PLL1FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL1P + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVP1EN LL_RCC_PLL1P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP1EN); +} + +/** + * @brief Disable PLL1Q + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVQ1EN LL_RCC_PLL1Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ1EN); +} + +/** + * @brief Disable PLL1R + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR DIVR1EN LL_RCC_PLL1R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR1EN); +} + +/** + * @brief Disable PLL1 FRACN + * @rmtoll PLLCFGR PLL1FRACEN LL_RCC_PLL1FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL1FRACEN); +} + +/** + * @brief Set PLL1 VCO OutputRange + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1VCOSEL LL_RCC_PLL1_SetVCOOuputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1VCOSEL, VCORange << RCC_PLLCFGR_PLL1VCOSEL_Pos); +} + +/** + * @brief Set PLL1 VCO Input Range + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCFGR PLL1RGE LL_RCC_PLL1_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL1_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL1RGE, InputRange << RCC_PLLCFGR_PLL1RGE_Pos); +} + +/** + * @brief Get PLL1 N Coefficient + * @rmtoll PLL1DIVR N1 LL_RCC_PLL1_GetN + * @retval A value between 4 and 512 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_N1) >> RCC_PLL1DIVR_N1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 M Coefficient + * @rmtoll PLLCKSELR DIVM1 LL_RCC_PLL1_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos); +} + +/** + * @brief Get PLL1 P Coefficient + * @rmtoll PLL1DIVR P1 LL_RCC_PLL1_GetP + * @retval A value between 2 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_P1) >> RCC_PLL1DIVR_P1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 Q Coefficient + * @rmtoll PLL1DIVR Q1 LL_RCC_PLL1_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_Q1) >> RCC_PLL1DIVR_Q1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 R Coefficient + * @rmtoll PLL1DIVR R1 LL_RCC_PLL1_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL1DIVR, RCC_PLL1DIVR_R1) >> RCC_PLL1DIVR_R1_Pos) + 1UL); +} + +/** + * @brief Get PLL1 FRACN Coefficient + * @rmtoll PLL1FRACR FRACN1 LL_RCC_PLL1_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL1_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1) >> RCC_PLL1FRACR_FRACN1_Pos); +} + +/** + * @brief Set PLL1 N Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR N1 LL_RCC_PLL1_SetN + * @param N parameter can be a value between 4 and 512 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_N1, (N - 1UL) << RCC_PLL1DIVR_N1_Pos); +} + +/** + * @brief Set PLL1 M Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLLCKSELR DIVM1 LL_RCC_PLL1_SetM + * @param M parameter can be a value between 0 and 63 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM1, M << RCC_PLLCKSELR_DIVM1_Pos); +} + +/** + * @brief Set PLL1 P Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR P1 LL_RCC_PLL1_SetP + * @param P parameter can be a value between 2 (or 1*) and 128 (ODD division factor not supported) + * + * (*) : For stm32h72xxx and stm32h73xxx family lines. + */ +__STATIC_INLINE void LL_RCC_PLL1_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_P1, (P - 1UL) << RCC_PLL1DIVR_P1_Pos); +} + +/** + * @brief Set PLL1 Q Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR Q1 LL_RCC_PLL1_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_Q1, (Q - 1UL) << RCC_PLL1DIVR_Q1_Pos); +} + +/** + * @brief Set PLL1 R Coefficient + * @note This API shall be called only when PLL1 is disabled. + * @rmtoll PLL1DIVR R1 LL_RCC_PLL1_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL1_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL1DIVR, RCC_PLL1DIVR_R1, (R - 1UL) << RCC_PLL1DIVR_R1_Pos); +} + +/** + * @brief Set PLL1 FRACN Coefficient + * @rmtoll PLL1FRACR FRACN1 LL_RCC_PLL1_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL1_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL1FRACR, RCC_PLL1FRACR_FRACN1, FRACN << RCC_PLL1FRACR_FRACN1_Pos); +} + +/** + * @brief Enable PLL2 + * @rmtoll CR PLL2ON LL_RCC_PLL2_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Disable PLL2 + * @note Cannot be disabled if the PLL2 clock is used as the system clock + * @rmtoll CR PLL2ON LL_RCC_PLL2_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); +} + +/** + * @brief Check if PLL2 Ready + * @rmtoll CR PLL2RDY LL_RCC_PLL2_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL2RDY) == (RCC_CR_PLL2RDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL2P + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL2P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP2EN); +} + +/** + * @brief Enable PLL2Q + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVQ2EN LL_RCC_PLL2Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ2EN); +} + +/** + * @brief Enable PLL2R + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVR2EN LL_RCC_PLL2R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR2EN); +} + +/** + * @brief Enable PLL2 FRACN + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN); +} + +/** + * @brief Check if PLL2 P is enabled + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL2P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP2EN) == RCC_PLLCFGR_DIVP2EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 Q is enabled + * @rmtoll PLLCFGR DIVQ2EN LL_RCC_PLL2Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ2EN) == RCC_PLLCFGR_DIVQ2EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 R is enabled + * @rmtoll PLLCFGR DIVR2EN LL_RCC_PLL2R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR2EN) == RCC_PLLCFGR_DIVR2EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 FRACN is enabled + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN) == RCC_PLLCFGR_PLL2FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL2P + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL2P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP2EN); +} + +/** + * @brief Disable PLL2Q + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVQ2EN LL_RCC_PLL2Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ2EN); +} + +/** + * @brief Disable PLL2R + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR DIVR2EN LL_RCC_PLL2R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR2EN); +} + +/** + * @brief Disable PLL2 FRACN + * @rmtoll PLLCFGR PLL2FRACEN LL_RCC_PLL2FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL2FRACEN); +} + +/** + * @brief Set PLL2 VCO OutputRange + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2VCOSEL LL_RCC_PLL2_SetVCOOuputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2VCOSEL, VCORange << RCC_PLLCFGR_PLL2VCOSEL_Pos); +} + +/** + * @brief Set PLL2 VCO Input Range + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCFGR PLL2RGE LL_RCC_PLL2_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL2_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL2RGE, InputRange << RCC_PLLCFGR_PLL2RGE_Pos); +} + +/** + * @brief Get PLL2 N Coefficient + * @rmtoll PLL2DIVR N2 LL_RCC_PLL2_GetN + * @retval A value between 4 and 512 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_N2) >> RCC_PLL2DIVR_N2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 M Coefficient + * @rmtoll PLLCKSELR DIVM2 LL_RCC_PLL2_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); +} + +/** + * @brief Get PLL2 P Coefficient + * @rmtoll PLL2DIVR P2 LL_RCC_PLL2_GetP + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_P2) >> RCC_PLL2DIVR_P2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 Q Coefficient + * @rmtoll PLL2DIVR Q2 LL_RCC_PLL2_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_Q2) >> RCC_PLL2DIVR_Q2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 R Coefficient + * @rmtoll PLL2DIVR R2 LL_RCC_PLL2_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL2DIVR, RCC_PLL2DIVR_R2) >> RCC_PLL2DIVR_R2_Pos) + 1UL); +} + +/** + * @brief Get PLL2 FRACN Coefficient + * @rmtoll PLL2FRACR FRACN2 LL_RCC_PLL2_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL2_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2) >> RCC_PLL2FRACR_FRACN2_Pos); +} + +/** + * @brief Set PLL2 N Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR N2 LL_RCC_PLL2_SetN + * @param N parameter can be a value between 4 and 512 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_N2, (N - 1UL) << RCC_PLL2DIVR_N2_Pos); +} + +/** + * @brief Set PLL2 M Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLLCKSELR DIVM2 LL_RCC_PLL2_SetM + * @param M parameter can be a value between 0 and 63 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM2, M << RCC_PLLCKSELR_DIVM2_Pos); +} + +/** + * @brief Set PLL2 P Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR P2 LL_RCC_PLL2_SetP + * @param P parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_P2, (P - 1UL) << RCC_PLL2DIVR_P2_Pos); +} + +/** + * @brief Set PLL2 Q Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR Q2 LL_RCC_PLL2_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_Q2, (Q - 1UL) << RCC_PLL2DIVR_Q2_Pos); +} + +/** + * @brief Set PLL2 R Coefficient + * @note This API shall be called only when PLL2 is disabled. + * @rmtoll PLL2DIVR R2 LL_RCC_PLL2_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL2_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL2DIVR, RCC_PLL2DIVR_R2, (R - 1UL) << RCC_PLL2DIVR_R2_Pos); +} + +/** + * @brief Set PLL2 FRACN Coefficient + * @rmtoll PLL2FRACR FRACN2 LL_RCC_PLL2_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL2_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL2FRACR, RCC_PLL2FRACR_FRACN2, FRACN << RCC_PLL2FRACR_FRACN2_Pos); +} + +/** + * @brief Enable PLL3 + * @rmtoll CR PLL3ON LL_RCC_PLL3_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Disable PLL3 + * @note Cannot be disabled if the PLL3 clock is used as the system clock + * @rmtoll CR PLL3ON LL_RCC_PLL3_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); +} + +/** + * @brief Check if PLL3 Ready + * @rmtoll CR PLL3RDY LL_RCC_PLL3_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_PLL3RDY) == (RCC_CR_PLL3RDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable PLL3P + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVP3EN LL_RCC_PLL3P_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3P_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP3EN); +} + +/** + * @brief Enable PLL3Q + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVQ3EN LL_RCC_PLL3Q_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3Q_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ3EN); +} + +/** + * @brief Enable PLL3R + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVR3EN LL_RCC_PLL3R_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3R_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR3EN); +} + +/** + * @brief Enable PLL3 FRACN + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3FRACN_Enable(void) +{ + SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN); +} + +/** + * @brief Check if PLL3 P is enabled + * @rmtoll PLLCFGR DIVP3EN LL_RCC_PLL3P_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3P_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP3EN) == RCC_PLLCFGR_DIVP3EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 Q is enabled + * @rmtoll PLLCFGR DIVQ3EN LL_RCC_PLL3Q_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3Q_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ3EN) == RCC_PLLCFGR_DIVQ3EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 R is enabled + * @rmtoll PLLCFGR DIVR3EN LL_RCC_PLL3R_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3R_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR3EN) == RCC_PLLCFGR_DIVR3EN) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 FRACN is enabled + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3FRACN_IsEnabled(void) +{ + return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN) == RCC_PLLCFGR_PLL3FRACEN) ? 1UL : 0UL); +} + +/** + * @brief Disable PLL3P + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVP2EN LL_RCC_PLL3P_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3P_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVP3EN); +} + +/** + * @brief Disable PLL3Q + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVQ3EN LL_RCC_PLL3Q_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3Q_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVQ3EN); +} + +/** + * @brief Disable PLL3R + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR DIVR3EN LL_RCC_PLL3R_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3R_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_DIVR3EN); +} + +/** + * @brief Disable PLL3 FRACN + * @rmtoll PLLCFGR PLL3FRACEN LL_RCC_PLL3FRACN_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3FRACN_Disable(void) +{ + CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLL3FRACEN); +} + +/** + * @brief Set PLL3 VCO OutputRange + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3VCOSEL LL_RCC_PLL3_SetVCOOuputRange + * @param VCORange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLVCORANGE_WIDE + * @arg @ref LL_RCC_PLLVCORANGE_MEDIUM + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_SetVCOOutputRange(uint32_t VCORange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3VCOSEL, VCORange << RCC_PLLCFGR_PLL3VCOSEL_Pos); +} + +/** + * @brief Set PLL3 VCO Input Range + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCFGR PLL3RGE LL_RCC_PLL3_SetVCOInputRange + * @param InputRange This parameter can be one of the following values: + * @arg @ref LL_RCC_PLLINPUTRANGE_1_2 + * @arg @ref LL_RCC_PLLINPUTRANGE_2_4 + * @arg @ref LL_RCC_PLLINPUTRANGE_4_8 + * @arg @ref LL_RCC_PLLINPUTRANGE_8_16 + * @retval None + */ +__STATIC_INLINE void LL_RCC_PLL3_SetVCOInputRange(uint32_t InputRange) +{ + MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLL3RGE, InputRange << RCC_PLLCFGR_PLL3RGE_Pos); +} + +/** + * @brief Get PLL3 N Coefficient + * @rmtoll PLL3DIVR N3 LL_RCC_PLL3_GetN + * @retval A value between 4 and 512 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetN(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_N3) >> RCC_PLL3DIVR_N3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 M Coefficient + * @rmtoll PLLCKSELR DIVM3 LL_RCC_PLL3_GetM + * @retval A value between 0 and 63 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetM(void) +{ + return (uint32_t)(READ_BIT(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); +} + +/** + * @brief Get PLL3 P Coefficient + * @rmtoll PLL3DIVR P3 LL_RCC_PLL3_GetP + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetP(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_P3) >> RCC_PLL3DIVR_P3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 Q Coefficient + * @rmtoll PLL3DIVR Q3 LL_RCC_PLL3_GetQ + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetQ(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_Q3) >> RCC_PLL3DIVR_Q3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 R Coefficient + * @rmtoll PLL3DIVR R3 LL_RCC_PLL3_GetR + * @retval A value between 1 and 128 + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetR(void) +{ + return (uint32_t)((READ_BIT(RCC->PLL3DIVR, RCC_PLL3DIVR_R3) >> RCC_PLL3DIVR_R3_Pos) + 1UL); +} + +/** + * @brief Get PLL3 FRACN Coefficient + * @rmtoll PLL3FRACR FRACN3 LL_RCC_PLL3_GetFRACN + * @retval A value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE uint32_t LL_RCC_PLL3_GetFRACN(void) +{ + return (uint32_t)(READ_BIT(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3) >> RCC_PLL3FRACR_FRACN3_Pos); +} + +/** + * @brief Set PLL3 N Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR N3 LL_RCC_PLL3_SetN + * @param N parameter can be a value between 4 and 512 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetN(uint32_t N) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_N3, (N - 1UL) << RCC_PLL3DIVR_N3_Pos); +} + +/** + * @brief Set PLL3 M Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLLCKSELR DIVM3 LL_RCC_PLL3_SetM + * @param M parameter can be a value between 0 and 63 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetM(uint32_t M) +{ + MODIFY_REG(RCC->PLLCKSELR, RCC_PLLCKSELR_DIVM3, M << RCC_PLLCKSELR_DIVM3_Pos); +} + +/** + * @brief Set PLL3 P Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR P3 LL_RCC_PLL3_SetP + * @param P parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetP(uint32_t P) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_P3, (P - 1UL) << RCC_PLL3DIVR_P3_Pos); +} + +/** + * @brief Set PLL3 Q Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR Q3 LL_RCC_PLL3_SetQ + * @param Q parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetQ(uint32_t Q) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_Q3, (Q - 1UL) << RCC_PLL3DIVR_Q3_Pos); +} + +/** + * @brief Set PLL3 R Coefficient + * @note This API shall be called only when PLL3 is disabled. + * @rmtoll PLL3DIVR R3 LL_RCC_PLL3_SetR + * @param R parameter can be a value between 1 and 128 + */ +__STATIC_INLINE void LL_RCC_PLL3_SetR(uint32_t R) +{ + MODIFY_REG(RCC->PLL3DIVR, RCC_PLL3DIVR_R3, (R - 1UL) << RCC_PLL3DIVR_R3_Pos); +} + +/** + * @brief Set PLL3 FRACN Coefficient + * @rmtoll PLL3FRACR FRACN3 LL_RCC_PLL3_SetFRACN + * @param FRACN parameter can be a value between 0 and 8191 (0x1FFF) + */ +__STATIC_INLINE void LL_RCC_PLL3_SetFRACN(uint32_t FRACN) +{ + MODIFY_REG(RCC->PLL3FRACR, RCC_PLL3FRACR_FRACN3, FRACN << RCC_PLL3FRACR_FRACN3_Pos); +} + + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSERDYC); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSERDYC); +} + +/** + * @brief Clear CSI ready interrupt flag + * @rmtoll CICR CSIRDYC LL_RCC_ClearFlag_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_CSIRDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_CSIRDYC); +} + +/** + * @brief Clear HSI48 ready interrupt flag + * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC); +} + +/** + * @brief Clear PLL1 ready interrupt flag + * @rmtoll CICR PLL1RDYC LL_RCC_ClearFlag_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL1RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC); +} + +/** + * @brief Clear PLL2 ready interrupt flag + * @rmtoll CICR PLL2RDYC LL_RCC_ClearFlag_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL2RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL2RDYC); +} + +/** + * @brief Clear PLL3 ready interrupt flag + * @rmtoll CICR PLL3RDYC LL_RCC_ClearFlag_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_PLL3RDY(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_PLL3RDYC); +} + +/** + * @brief Clear LSE Clock security system interrupt flag + * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_LSECSSC); +} + +/** + * @brief Clear HSE Clock security system interrupt flag + * @rmtoll CICR HSECSSC LL_RCC_ClearFlag_HSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void) +{ + SET_BIT(RCC->CICR, RCC_CICR_HSECSSC); +} + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if CSI ready interrupt occurred or not + * @rmtoll CIFR CSIRDYF LL_RCC_IsActiveFlag_CSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_CSIRDYF) == (RCC_CIFR_CSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI48 ready interrupt occurred or not + * @rmtoll CIFR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL1 ready interrupt occurred or not + * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLL1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL1RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL2 ready interrupt occurred or not + * @rmtoll CIFR PLL2RDYF LL_RCC_IsActiveFlag_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL2RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL2RDYF) == (RCC_CIFR_PLL2RDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if PLL3 ready interrupt occurred or not + * @rmtoll CIFR PLL3RDYF LL_RCC_IsActiveFlag_PLL3RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLL3RDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_PLL3RDYF) == (RCC_CIFR_PLL3RDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE Clock security system interrupt occurred or not + * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE Clock security system interrupt occurred or not + * @rmtoll CIFR HSECSSF LL_RCC_IsActiveFlag_HSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSECSSF) == (RCC_CIFR_HSECSSF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST (*)\n + * RSR LPWR1RSTF LL_RCC_IsActiveFlag_LPWRRST (**) + * + * (*) Only available for single core devices + * (**) Only available for Dual core devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void) +{ +#if defined(DUAL_CORE) + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWR1RSTF) == (RCC_RSR_LPWR1RSTF)) ? 1UL : 0UL); +#else + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWRRSTF) == (RCC_RSR_LPWRRSTF)) ? 1UL : 0UL); +#endif /*DUAL_CORE*/ +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Low Power D2 reset is set or not. + * @rmtoll RSR LPWR2RSTF LL_RCC_IsActiveFlag_LPWR2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWR2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_LPWR2RSTF) == (RCC_RSR_LPWR2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag Window Watchdog 1 reset is set or not. + * @rmtoll RSR WWDG1RSTF LL_RCC_IsActiveFlag_WWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDG1RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_WWDG1RSTF) == (RCC_RSR_WWDG1RSTF)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Window Watchdog 2 reset is set or not. + * @rmtoll RSR WWDG2RSTF LL_RCC_IsActiveFlag_WWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDG2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_WWDG2RSTF) == (RCC_RSR_WWDG2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag Independent Watchdog 1 reset is set or not. + * @rmtoll RSR IWDG1RSTF LL_RCC_IsActiveFlag_IWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDG1RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_IWDG1RSTF) == (RCC_RSR_IWDG1RSTF)) ? 1UL : 0UL); +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Independent Watchdog 2 reset is set or not. + * @rmtoll RSR IWDG2RSTF LL_RCC_IsActiveFlag_IWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDG2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_IWDG2RSTF) == (RCC_RSR_IWDG2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll RSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST (*)\n + * RSR SFT1RSTF LL_RCC_IsActiveFlag_SFTRST (**) + * + * (*) Only available for single core devices + * (**) Only available for Dual core devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ +#if defined(DUAL_CORE) + return ((READ_BIT(RCC->RSR, RCC_RSR_SFT1RSTF) == (RCC_RSR_SFT1RSTF)) ? 1UL : 0UL); +#else + return ((READ_BIT(RCC->RSR, RCC_RSR_SFTRSTF) == (RCC_RSR_SFTRSTF)) ? 1UL : 0UL); +#endif /*DUAL_CORE*/ +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll RSR SFT2RSTF LL_RCC_IsActiveFlag_SFT2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFT2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_SFT2RSTF) == (RCC_RSR_SFT2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Check if RCC flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_PORRSTF) == (RCC_RSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_PINRSTF) == (RCC_RSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +#if defined(RCC_RSR_D1RSTF) +/** + * @brief Check if RCC flag D1 reset is set or not. + * @rmtoll RSR D1RSTF LL_RCC_IsActiveFlag_D1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_D1RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_D1RSTF) == (RCC_RSR_D1RSTF)) ? 1UL : 0UL); +} +#endif /* RCC_RSR_D1RSTF */ + +#if defined(RCC_RSR_CDRSTF) +/** + * @brief Check if RCC flag CD reset is set or not. + * @rmtoll RSR CDRSTF LL_RCC_IsActiveFlag_CDRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CDRST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_CDRSTF) == (RCC_RSR_CDRSTF)) ? 1UL : 0UL); +} +#endif /* RCC_RSR_CDRSTF */ + +#if defined(RCC_RSR_D2RSTF) +/** + * @brief Check if RCC flag D2 reset is set or not. + * @rmtoll RSR D2RSTF LL_RCC_IsActiveFlag_D2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_D2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_D2RSTF) == (RCC_RSR_D2RSTF)) ? 1UL : 0UL); +} +#endif /* RCC_RSR_D2RSTF */ + +#if defined(RCC_RSR_C1RSTF) || defined(RCC_RSR_CPURSTF) +/** + * @brief Check if RCC flag CPU reset is set or not. + * @rmtoll RSR CPURSTF LL_RCC_IsActiveFlag_CPURST (*)\n + * RSR C1RSTF LL_RCC_IsActiveFlag_CPURST (**) + * + * (*) Only available for single core devices + * (**) Only available for Dual core devices + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CPURST(void) +{ +#if defined(DUAL_CORE) + return ((READ_BIT(RCC->RSR, RCC_RSR_C1RSTF) == (RCC_RSR_C1RSTF)) ? 1UL : 0UL); +#else + return ((READ_BIT(RCC->RSR, RCC_RSR_CPURSTF) == (RCC_RSR_CPURSTF)) ? 1UL : 0UL); +#endif/*DUAL_CORE*/ +} +#endif /* defined(RCC_RSR_C1RSTF) || defined(RCC_RSR_CPURSTF) */ + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC flag CPU2 reset is set or not. + * @rmtoll RSR C2RSTF LL_RCC_IsActiveFlag_CPU2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_CPU2RST(void) +{ + return ((READ_BIT(RCC->RSR, RCC_RSR_C2RSTF) == (RCC_RSR_C2RSTF)) ? 1UL : 0UL); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Set RMVF bit to clear all reset flags. + * @rmtoll RSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); +} + +#if defined(DUAL_CORE) +/** + * @brief Check if RCC_C1 flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWR1RSTF LL_C1_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_LPWR1RSTF) == (RCC_RSR_LPWR1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Low Power D2 reset is set or not. + * @rmtoll RSR LPWR2RSTF LL_C1_RCC_IsActiveFlag_LPWR2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_LPWR2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_LPWR2RSTF) == (RCC_RSR_LPWR2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Window Watchdog 1 reset is set or not. + * @rmtoll RSR WWDG1RSTF LL_C1_RCC_IsActiveFlag_WWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_WWDG1RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_WWDG1RSTF) == (RCC_RSR_WWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Window Watchdog 2 reset is set or not. + * @rmtoll RSR WWDG2RSTF LL_C1_RCC_IsActiveFlag_WWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_WWDG2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_WWDG2RSTF) == (RCC_RSR_WWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Independent Watchdog 1 reset is set or not. + * @rmtoll RSR IWDG1RSTF LL_C1_RCC_IsActiveFlag_IWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_IWDG1RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_IWDG1RSTF) == (RCC_RSR_IWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Independent Watchdog 2 reset is set or not. + * @rmtoll RSR IWDG2RSTF LL_C1_RCC_IsActiveFlag_IWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_IWDG2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_IWDG2RSTF) == (RCC_RSR_IWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Software reset is set or not. + * @rmtoll RSR SFT1RSTF LL_C1_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_SFT1RSTF) == (RCC_RSR_SFT1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Software reset is set or not. + * @rmtoll RSR SFT2RSTF LL_C1_RCC_IsActiveFlag_SFT2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_SFT2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_SFT2RSTF) == (RCC_RSR_SFT2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_C1_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_PORRSTF) == (RCC_RSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_C1_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_PINRSTF) == (RCC_RSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_C1_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag D1 reset is set or not. + * @rmtoll RSR D1RSTF LL_C1_RCC_IsActiveFlag_D1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_D1RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_D1RSTF) == (RCC_RSR_D1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag D2 reset is set or not. + * @rmtoll RSR D2RSTF LL_C1_RCC_IsActiveFlag_D2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_D2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_D2RSTF) == (RCC_RSR_D2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag CPU reset is set or not. + * @rmtoll RSR C1RSTF LL_C1_RCC_IsActiveFlag_CPURST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_CPURST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_C1RSTF) == (RCC_RSR_C1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C1 flag CPU2 reset is set or not. + * @rmtoll RSR C2RSTF LL_C1_RCC_IsActiveFlag_CPU2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C1_RCC_IsActiveFlag_CPU2RST(void) +{ + return ((READ_BIT(RCC_C1->RSR, RCC_RSR_C2RSTF) == (RCC_RSR_C2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll RSR RMVF LL_C1_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_C1_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC_C1->RSR, RCC_RSR_RMVF); +} + +/** + * @brief Check if RCC_C2 flag Low Power D1 reset is set or not. + * @rmtoll RSR LPWR1RSTF LL_C2_RCC_IsActiveFlag_LPWRRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_LPWRRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_LPWR1RSTF) == (RCC_RSR_LPWR1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Low Power D2 reset is set or not. + * @rmtoll RSR LPWR2RSTF LL_C2_RCC_IsActiveFlag_LPWR2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_LPWR2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_LPWR2RSTF) == (RCC_RSR_LPWR2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Window Watchdog 1 reset is set or not. + * @rmtoll RSR WWDG1RSTF LL_C2_RCC_IsActiveFlag_WWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_WWDG1RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_WWDG1RSTF) == (RCC_RSR_WWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Window Watchdog 2 reset is set or not. + * @rmtoll RSR WWDG2RSTF LL_C2_RCC_IsActiveFlag_WWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_WWDG2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_WWDG2RSTF) == (RCC_RSR_WWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Independent Watchdog 1 reset is set or not. + * @rmtoll RSR IWDG1RSTF LL_C2_RCC_IsActiveFlag_IWDG1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_IWDG1RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_IWDG1RSTF) == (RCC_RSR_IWDG1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Independent Watchdog 2 reset is set or not. + * @rmtoll RSR IWDG2RSTF LL_C2_RCC_IsActiveFlag_IWDG2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_IWDG2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_IWDG2RSTF) == (RCC_RSR_IWDG2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Software reset is set or not. + * @rmtoll RSR SFT1RSTF LL_C2_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_SFT1RSTF) == (RCC_RSR_SFT1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Software reset is set or not. + * @rmtoll RSR SFT2RSTF LL_C2_RCC_IsActiveFlag_SFT2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_SFT2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_SFT2RSTF) == (RCC_RSR_SFT2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag POR/PDR reset is set or not. + * @rmtoll RSR PORRSTF LL_C2_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_PORRSTF) == (RCC_RSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag Pin reset is set or not. + * @rmtoll RSR PINRSTF LL_C2_RCC_IsActiveFlag_PINRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_PINRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_PINRSTF) == (RCC_RSR_PINRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag BOR reset is set or not. + * @rmtoll RSR BORRSTF LL_C2_RCC_IsActiveFlag_BORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_BORRST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_BORRSTF) == (RCC_RSR_BORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag D1 reset is set or not. + * @rmtoll RSR D1RSTF LL_C2_RCC_IsActiveFlag_D1RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_D1RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_D1RSTF) == (RCC_RSR_D1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag D2 reset is set or not. + * @rmtoll RSR D2RSTF LL_C2_RCC_IsActiveFlag_D2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_D2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_D2RSTF) == (RCC_RSR_D2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag CPU reset is set or not. + * @rmtoll RSR C1RSTF LL_C2_RCC_IsActiveFlag_CPURST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_CPURST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_C1RSTF) == (RCC_RSR_C1RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC_C2 flag CPU2 reset is set or not. + * @rmtoll RSR C2RSTF LL_C2_RCC_IsActiveFlag_CPU2RST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_C2_RCC_IsActiveFlag_CPU2RST(void) +{ + return ((READ_BIT(RCC_C2->RSR, RCC_RSR_C2RSTF) == (RCC_RSR_C2RSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll RSR RMVF LL_C2_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_C2_RCC_ClearResetFlags(void) +{ + SET_BIT(RCC_C2->RSR, RCC_RSR_RMVF); +} +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable CSI ready interrupt + * @rmtoll CIER CSIRDYIE LL_RCC_EnableIT_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_CSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_CSIRDYIE); +} + +/** + * @brief Enable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} + +/** + * @brief Enable PLL1 ready interrupt + * @rmtoll CIER PLL1RDYIE LL_RCC_EnableIT_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL1RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE); +} + +/** + * @brief Enable PLL2 ready interrupt + * @rmtoll CIER PLL2RDYIE LL_RCC_EnableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL2RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE); +} + +/** + * @brief Enable PLL3 ready interrupt + * @rmtoll CIER PLL3RDYIE LL_RCC_EnableIT_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_PLL3RDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE); +} + +/** + * @brief Enable LSECSS interrupt + * @rmtoll CIER LSECSSIE LL_RCC_EnableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable CSI ready interrupt + * @rmtoll CIER CSIRDYIE LL_RCC_DisableIT_CSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_CSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_CSIRDYIE); +} + +/** + * @brief Disable HSI48 ready interrupt + * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE); +} + +/** + * @brief Disable PLL1 ready interrupt + * @rmtoll CIER PLL1RDYIE LL_RCC_DisableIT_PLL1RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL1RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE); +} + +/** + * @brief Disable PLL2 ready interrupt + * @rmtoll CIER PLL2RDYIE LL_RCC_DisableIT_PLL2RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL2RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE); +} + +/** + * @brief Disable PLL3 ready interrupt + * @rmtoll CIER PLL3RDYIE LL_RCC_DisableIT_PLL3RDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_PLL3RDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE); +} + +/** + * @brief Disable LSECSS interrupt + * @rmtoll CIER LSECSSIE LL_RCC_DisableIT_LSECSS + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSECSSIE); +} + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnableIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == RCC_CIER_LSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnableIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == RCC_CIER_LSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnableIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == RCC_CIER_HSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnableIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == RCC_CIER_HSERDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if CSI ready interrupt source is enabled or disabled. + * @rmtoll CIER CSIRDYIE LL_RCC_IsEnableIT_CSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_CSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_CSIRDYIE) == RCC_CIER_CSIRDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI48 ready interrupt source is enabled or disabled. + * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnableIT_HSI48RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_HSI48RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == RCC_CIER_HSI48RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL1 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL1RDYIE LL_RCC_IsEnableIT_PLL1RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL1RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL1RDYIE) == RCC_CIER_PLL1RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL2 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL2RDYIE LL_RCC_IsEnableIT_PLL2RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL2RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL2RDYIE) == RCC_CIER_PLL2RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if PLL3 ready interrupt source is enabled or disabled. + * @rmtoll CIER PLL3RDYIE LL_RCC_IsEnableIT_PLL3RDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_PLL3RDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_PLL3RDYIE) == RCC_CIER_PLL3RDYIE) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSECSS interrupt source is enabled or disabled. + * @rmtoll CIER LSECSSIE LL_RCC_IsEnableIT_LSECSS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnableIT_LSECSS(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSECSSIE) == RCC_CIER_LSECSSIE) ? 1UL : 0UL); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +void LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +uint32_t LL_RCC_CalcPLLClockFreq(uint32_t PLLInputFreq, uint32_t M, uint32_t N, uint32_t FRACN, uint32_t PQR); + +void LL_RCC_GetPLL1ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetPLL2ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetPLL3ClockFreq(LL_PLL_ClocksTypeDef *PLL_Clocks); +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); + +uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource); +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource); +uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource); +uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource); +uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource); +uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource); +uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource); +uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource); +uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource); +uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource); +#if defined(DFSDM2_BASE) +uint32_t LL_RCC_GetDFSDM2ClockFreq(uint32_t DFSDMxSource); +#endif /* DFSDM2_BASE */ +#if defined(DSI) +uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource); +#endif /* DSI */ +uint32_t LL_RCC_GetSPDIFClockFreq(uint32_t SPDIFxSource); +uint32_t LL_RCC_GetSPIClockFreq(uint32_t SPIxSource); +uint32_t LL_RCC_GetSWPClockFreq(uint32_t SWPxSource); +uint32_t LL_RCC_GetFDCANClockFreq(uint32_t FDCANxSource); +uint32_t LL_RCC_GetFMCClockFreq(uint32_t FMCxSource); +#if defined(QUADSPI) +uint32_t LL_RCC_GetQSPIClockFreq(uint32_t QSPIxSource); +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) +uint32_t LL_RCC_GetOSPIClockFreq(uint32_t OSPIxSource); +#endif /* defined(OCTOSPI1) || defined(OCTOSPI2) */ +uint32_t LL_RCC_GetCLKPClockFreq(uint32_t CLKPxSource); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + + +/** + * @} + */ +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_RCC_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h new file mode 100644 index 0000000..aa5149a --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_system.h @@ -0,0 +1,2442 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to DBGCMU registers + (+) Access to SYSCFG registers + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_LL_SYSTEM_H +#define __STM32H7xx_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ +/** @defgroup SYSTEM_LL_EC_FLASH_BANK1_SECTORS SYSCFG Flash Bank1 sectors bits status + * @{ + */ +#define LL_SYSCFG_FLASH_B1_SECTOR0_STATUS_BIT 0x10000U +#define LL_SYSCFG_FLASH_B1_SECTOR1_STATUS_BIT 0x20000U +#define LL_SYSCFG_FLASH_B1_SECTOR2_STATUS_BIT 0x40000U +#define LL_SYSCFG_FLASH_B1_SECTOR3_STATUS_BIT 0x80000U +#define LL_SYSCFG_FLASH_B1_SECTOR4_STATUS_BIT 0x100000U +#define LL_SYSCFG_FLASH_B1_SECTOR5_STATUS_BIT 0x200000U +#define LL_SYSCFG_FLASH_B1_SECTOR6_STATUS_BIT 0x400000U +#define LL_SYSCFG_FLASH_B1_SECTOR7_STATUS_BIT 0x800000U +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_FLASH_BANK2_SECTORS SYSCFG Flash Bank2 sectors bits status + * @{ + */ +#define LL_SYSCFG_FLASH_B2_SECTOR0_STATUS_BIT 0x10000U +#define LL_SYSCFG_FLASH_B2_SECTOR1_STATUS_BIT 0x20000U +#define LL_SYSCFG_FLASH_B2_SECTOR2_STATUS_BIT 0x40000U +#define LL_SYSCFG_FLASH_B2_SECTOR3_STATUS_BIT 0x80000U +#define LL_SYSCFG_FLASH_B2_SECTOR4_STATUS_BIT 0x100000U +#define LL_SYSCFG_FLASH_B2_SECTOR5_STATUS_BIT 0x200000U +#define LL_SYSCFG_FLASH_B2_SECTOR6_STATUS_BIT 0x400000U +#define LL_SYSCFG_FLASH_B2_SECTOR7_STATUS_BIT 0x800000U +/** + * @} + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_PMCR_I2C1_FMP /*!< Enable Fast Mode Plus for I2C1 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_PMCR_I2C2_FMP /*!< Enable Fast Mode Plus for I2C2 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_PMCR_I2C3_FMP /*!< Enable Fast Mode Plus for I2C3 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_PMCR_I2C4_FMP /*!< Enable Fast Mode Plus for I2C4 */ +#if defined(I2C5) +#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C5 SYSCFG_PMCR_I2C5_FMP /*!< Enable Fast Mode Plus for I2C5 */ +#endif /*I2C5*/ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_PMCR_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_PMCR_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_PMCR_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */ +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_PMCR_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_ANALOG_SWITCH Analog Switch control +* @{ +*/ +#if defined(SYSCFG_PMCR_BOOSTEN) +#define LL_SYSCFG_ANALOG_SWITCH_BOOSTEN SYSCFG_PMCR_BOOSTEN /*!< I/O analog switch voltage booster enable */ +#endif /*SYSCFG_PMCR_BOOSTEN*/ +#define LL_SYSCFG_ANALOG_SWITCH_PA0 SYSCFG_PMCR_PA0SO /*!< PA0 Switch Open */ +#define LL_SYSCFG_ANALOG_SWITCH_PA1 SYSCFG_PMCR_PA1SO /*!< PA1 Switch Open */ +#define LL_SYSCFG_ANALOG_SWITCH_PC2 SYSCFG_PMCR_PC2SO /*!< PC2 Switch Open */ +#define LL_SYSCFG_ANALOG_SWITCH_PC3 SYSCFG_PMCR_PC3SO /*!< PC3 Switch Open */ +/** + * @} + */ + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** @defgroup SYSTEM_LL_EC_EPIS Ethernet PHY Interface Selection +* @{ +*/ +#define LL_SYSCFG_ETH_MII 0x00000000U /*!< ETH Media MII interface */ +#define LL_SYSCFG_ETH_RMII SYSCFG_PMCR_EPIS_SEL_2 /*!< ETH Media RMII interface */ +/** + * @} + */ +#endif /* SYSCFG_PMCR_EPIS_SEL */ + +/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT + * @{ + */ +#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */ +#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */ +#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */ +#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */ +#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */ +#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */ +#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */ +#define LL_SYSCFG_EXTI_PORTH 7U /*!< EXTI PORT H */ +#if defined(GPIOI) +#define LL_SYSCFG_EXTI_PORTI 8U /*!< EXTI PORT I */ +#endif /*GPIOI*/ +#define LL_SYSCFG_EXTI_PORTJ 9U /*!< EXTI PORT J */ +#define LL_SYSCFG_EXTI_PORTK 10U /*!< EXTI PORT k */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE + * @{ + */ +#define LL_SYSCFG_EXTI_LINE0 ((0x000FUL << 16U) | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE1 ((0x00F0UL << 16U) | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE2 ((0x0F00UL << 16U) | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE3 ((0xF000UL << 16U) | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */ +#define LL_SYSCFG_EXTI_LINE4 ((0x000FUL << 16U) | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE5 ((0x00F0UL << 16U) | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE6 ((0x0F00UL << 16U) | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE7 ((0xF000UL << 16U) | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */ +#define LL_SYSCFG_EXTI_LINE8 ((0x000FUL << 16U) | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE9 ((0x00F0UL << 16U) | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE10 ((0x0F00UL << 16U) | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE11 ((0xF000UL << 16U) | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */ +#define LL_SYSCFG_EXTI_LINE12 ((0x000FUL << 16U) | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE13 ((0x00F0UL << 16U) | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE14 ((0x0F00UL << 16U) | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */ +#define LL_SYSCFG_EXTI_LINE15 ((0xF000UL << 16U) | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK + * @{ + */ +#define LL_SYSCFG_TIMBREAK_AXISRAM_DBL_ECC SYSCFG_CFGR_AXISRAML /*!< Enables and locks the AXIRAM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_ITCM_DBL_ECC SYSCFG_CFGR_ITCML /*!< Enables and locks the ITCM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_DTCM_DBL_ECC SYSCFG_CFGR_DTCML /*!< Enables and locks the DTCM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_SRAM1_DBL_ECC SYSCFG_CFGR_SRAM1L /*!< Enables and locks the SRAM1 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_SRAM2_DBL_ECC SYSCFG_CFGR_SRAM2L /*!< Enables and locks the SRAM2 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#if defined(SYSCFG_CFGR_SRAM3L) +#define LL_SYSCFG_TIMBREAK_SRAM3_DBL_ECC SYSCFG_CFGR_SRAM3L /*!< Enables and locks the SRAM3 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ +#endif /*SYSCFG_CFGR_SRAM3L*/ + +#define LL_SYSCFG_TIMBREAK_SRAM4_DBL_ECC SYSCFG_CFGR_SRAM4L /*!< Enables and locks the SRAM4 double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_BKRAM_DBL_ECC SYSCFG_CFGR_BKRAML /*!< Enables and locks the BKRAM double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_CM7_LOCKUP SYSCFG_CFGR_CM7L /*!< Enables and locks the Cortex-M7 LOCKUP signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_FLASH_DBL_ECC SYSCFG_CFGR_FLASHL /*!< Enables and locks the FLASH double ECC error signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ + +#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR_PVDL /*!< Enables and locks the PVD connection + with TIM1/8/15/16/17 and HRTIM Break Input + and also the PVDE and PLS bits of the Power Control Interface */ +#if defined(DUAL_CORE) +#define LL_SYSCFG_TIMBREAK_CM4_LOCKUP SYSCFG_CFGR_CM4L /*!< Enables and locks the Cortex-M4 LOCKUP signal + with Break Input of TIM1/8/15/16/17 and HRTIM */ +#endif /* DUAL_CORE */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_CS SYSCFG I/O compensation cell Code selection + * @{ + */ +#define LL_SYSCFG_CELL_CODE 0U +#define LL_SYSCFG_REGISTER_CODE SYSCFG_CCCSR_CS +/** + * @} + */ + +/** @defgroup SYSTEM_LL_IWDG1_CONTROL_MODES SYSCFG IWDG1 control modes + * @{ + */ +#define LL_SYSCFG_IWDG1_SW_CONTROL_MODE 0U +#define LL_SYSCFG_IWDG1_HW_CONTROL_MODE SYSCFG_UR11_IWDG1M +/** + * @} + */ + +#if defined (DUAL_CORE) +/** @defgroup SYSTEM_LL_IWDG2_CONTROL_MODES SYSCFG IWDG2 control modes + * @{ + */ +#define LL_SYSCFG_IWDG2_SW_CONTROL_MODE 0U +#define LL_SYSCFG_IWDG2_HW_CONTROL_MODE SYSCFG_UR12_IWDG2M +/** + * @} + */ +#endif /* DUAL_CORE */ + +/** @defgroup SYSTEM_LL_DTCM_RAM_SIZE SYSCFG DTCM RAM size configuration + * @{ + */ +#define LL_SYSCFG_DTCM_RAM_SIZE_2KB 0U +#define LL_SYSCFG_DTCM_RAM_SIZE_4KB 1U +#define LL_SYSCFG_DTCM_RAM_SIZE_8KB 2U +#define LL_SYSCFG_DTCM_RAM_SIZE_16KB 3U +/** + * @} + */ +#ifdef SYSCFG_UR17_TCM_AXI_CFG +/** @defgroup SYSTEM_LL_PACKAGE SYSCFG device package + * @{ + */ +#define LL_SYSCFG_ITCM_AXI_64KB_320KB 0U +#define LL_SYSCFG_ITCM_AXI_128KB_256KB 1U +#define LL_SYSCFG_ITCM_AXI_192KB_192KB 2U +#define LL_SYSCFG_ITCM_AXI_256KB_128KB 3U +/** + * @} + */ +#endif /* #ifdef SYSCFG_UR17_TCM_AXI_CFG */ +#if defined(SYSCFG_PKGR_PKG) +/** @defgroup SYSTEM_LL_PACKAGE SYSCFG device package + * @{ + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define LL_SYSCFG_LQFP100_PACKAGE 0U +#define LL_SYSCFG_TQFP144_PACKAGE 2U +#define LL_SYSCFG_TQFP176_UFBGA176_PACKAGE 5U +#define LL_SYSCFG_LQFP208_TFBGA240_PACKAGE 8U +#elif (STM32H7_DEV_ID == 0x483UL) +#define LL_SYSCFG_VFQFPN68_INDUS_PACKAGE 0U +#define LL_SYSCFG_TFBGA100_LQFP100_PACKAGE 1U +#define LL_SYSCFG_LQFP100_INDUS_PACKAGE 2U +#define LL_SYSCFG_TFBGA100_INDUS_PACKAGE 3U +#define LL_SYSCFG_WLCSP115_INDUS_PACKAGE 4U +#define LL_SYSCFG_LQFP144_PACKAGE 5U +#define LL_SYSCFG_UFBGA144_PACKAGE 6U +#define LL_SYSCFG_LQFP144_INDUS_PACKAGE 7U +#define LL_SYSCFG_UFBGA169_INDUS_PACKAGE 8U +#define LL_SYSCFG_UFBGA176PLUS25_INDUS_PACKAGE 9U +#define LL_SYSCFG_LQFP176_INDUS_PACKAGE 10U +#endif /* STM32H7_DEV_ID == 0x450UL */ +/** + * @} + */ +#endif /* SYSCFG_PKGR_PKG */ + +/** @defgroup SYSTEM_LL_SYSCFG_BOR SYSCFG Brownout Reset Threshold Level + * @{ + */ +#define LL_SYSCFG_BOR_OFF_RESET_LEVEL 0x00000000U +#define LL_SYSCFG_BOR_LOW_RESET_LEVEL SYSCFG_UR2_BORH_0 +#define LL_SYSCFG_BOR_MEDIUM_RESET_LEVEL SYSCFG_UR2_BORH_1 +#define LL_SYSCFG_BOR_HIGH_RESET_LEVEL SYSCFG_UR2_BORH + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment + * @{ + */ +#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ +#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ +#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1LFZ1_DBG_TIM2 /*!< TIM2 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1LFZ1_DBG_TIM3 /*!< TIM3 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1LFZ1_DBG_TIM4 /*!< TIM4 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1LFZ1_DBG_TIM5 /*!< TIM5 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1LFZ1_DBG_TIM6 /*!< TIM6 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1LFZ1_DBG_TIM7 /*!< TIM7 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1LFZ1_DBG_TIM12 /*!< TIM12 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1LFZ1_DBG_TIM13 /*!< TIM13 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1LFZ1_DBG_TIM14 /*!< TIM14 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1LFZ1_DBG_LPTIM1 /*!< LPTIM1 counter stopped when core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1LFZ1_DBG_I2C1 /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1LFZ1_DBG_I2C2 /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1LFZ1_DBG_I2C3 /*!< I2C3 SMBUS timeout mode stopped when Core is halted */ +#if defined(I2C5) +#define LL_DBGMCU_APB1_GRP1_I2C5_STOP DBGMCU_APB1LFZ1_DBG_I2C5 /*!< I2C5 SMBUS timeout mode stopped when Core is halted */ +#endif /*I2C5*/ +/** + * @} + */ + + +/** @defgroup SYSTEM_LL_EC_APB1_GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP + * @{ + */ +#if defined(DBGMCU_APB1HFZ1_DBG_FDCAN) +#define LL_DBGMCU_APB1_GRP2_FDCAN_STOP DBGMCU_APB1HFZ1_DBG_FDCAN /*!< FDCAN is frozen while the core is in debug mode */ +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ +#if defined(TIM23) +#define LL_DBGMCU_APB1_GRP2_TIM23_STOP DBGMCU_APB1HFZ1_DBG_TIM23 /*!< TIM23 is frozen while the core is in debug mode */ +#endif /*TIM23*/ +#if defined(TIM24) +#define LL_DBGMCU_APB1_GRP2_TIM24_STOP DBGMCU_APB1HFZ1_DBG_TIM24 /*!< TIM24 is frozen while the core is in debug mode */ +#endif /*TIM24*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2FZ1_DBG_TIM1 /*!< TIM1 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2FZ1_DBG_TIM8 /*!< TIM8 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_APB2FZ1_DBG_TIM15 /*!< TIM15 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_APB2FZ1_DBG_TIM16 /*!< TIM16 counter stopped when core is halted */ +#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_APB2FZ1_DBG_TIM17 /*!< TIM17 counter stopped when core is halted */ +#if defined(HRTIM1) +#define LL_DBGMCU_APB2_GRP1_HRTIM_STOP DBGMCU_APB2FZ1_DBG_HRTIM /*!< HRTIM counter stopped when core is halted */ +#endif /*HRTIM1*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB3_GRP1_STOP_IP DBGMCU APB3 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB3_GRP1_WWDG1_STOP DBGMCU_APB3FZ1_DBG_WWDG1 /*!< WWDG1 is frozen while the core is in debug mode */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB4_GRP1_STOP_IP DBGMCU APB4 GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB4_GRP1_I2C4_STOP DBGMCU_APB4FZ1_DBG_I2C4 /*!< I2C4 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM2_STOP DBGMCU_APB4FZ1_DBG_LPTIM2 /*!< LPTIM2 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM3_STOP DBGMCU_APB4FZ1_DBG_LPTIM3 /*!< LPTIM3 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM4_STOP DBGMCU_APB4FZ1_DBG_LPTIM4 /*!< LPTIM4 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_LPTIM5_STOP DBGMCU_APB4FZ1_DBG_LPTIM5 /*!< LPTIM5 is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_RTC_STOP DBGMCU_APB4FZ1_DBG_RTC /*!< RTC is frozen while the core is in debug mode */ +#define LL_DBGMCU_APB4_GRP1_IWDG1_STOP DBGMCU_APB4FZ1_DBG_IWDG1 /*!< IWDG1 is frozen while the core is in debug mode */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */ +#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */ +#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */ +#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */ +#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */ +#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */ +#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */ +#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ + +/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG + * @{ + */ + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** + * @brief Select Ethernet PHY interface + * @rmtoll PMCR EPIS_SEL LL_SYSCFG_SetPHYInterface + * @param Interface This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_ETH_MII + * @arg @ref LL_SYSCFG_ETH_RMII + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface) +{ + MODIFY_REG(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL, Interface); +} + +/** + * @brief Get Ethernet PHY interface + * @rmtoll PMCR EPIS_SEL LL_SYSCFG_GetPHYInterface + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_ETH_MII + * @arg @ref LL_SYSCFG_ETH_RMII + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL)); +} + +#endif /* SYSCFG_PMCR_EPIS_SEL */ +/** + * @brief Open an Analog Switch + * @rmtoll PMCR PA0SO LL_SYSCFG_OpenAnalogSwitch + * @rmtoll PMCR PA1SO LL_SYSCFG_OpenAnalogSwitch + * @rmtoll PMCR PC2SO LL_SYSCFG_OpenAnalogSwitch + * @rmtoll PMCR PC3SO LL_SYSCFG_OpenAnalogSwitch + * @param AnalogSwitch This parameter can be one of the following values: + * @arg LL_SYSCFG_ANALOG_SWITCH_PA0 : PA0 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PA1: PA1 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC2 : PC2 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC3: PC3 analog switch + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_OpenAnalogSwitch(uint32_t AnalogSwitch) +{ + SET_BIT(SYSCFG->PMCR, AnalogSwitch); +} + +/** + * @brief Close an Analog Switch + * @rmtoll PMCR PA0SO LL_SYSCFG_CloseAnalogSwitch + * @rmtoll PMCR PA1SO LL_SYSCFG_CloseAnalogSwitch + * @rmtoll PMCR PC2SO LL_SYSCFG_CloseAnalogSwitch + * @rmtoll PMCR PC3SO LL_SYSCFG_CloseAnalogSwitch + * @param AnalogSwitch This parameter can be one of the following values: + * @arg LL_SYSCFG_ANALOG_SWITCH_PA0 : PA0 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PA1: PA1 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC2 : PC2 analog switch + * @arg LL_SYSCFG_ANALOG_SWITCH_PC3: PC3 analog switch + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_CloseAnalogSwitch(uint32_t AnalogSwitch) +{ + CLEAR_BIT(SYSCFG->PMCR, AnalogSwitch); +} +#ifdef SYSCFG_PMCR_BOOSTEN +/** + * @brief Enable the Analog booster to reduce the total harmonic distortion + * of the analog switch when the supply voltage is lower than 2.7 V + * @rmtoll PMCR BOOSTEN LL_SYSCFG_EnableAnalogBooster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void) +{ + SET_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} + +/** + * @brief Disable the Analog booster + * @rmtoll PMCR BOOSTEN LL_SYSCFG_DisableAnalogBooster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void) +{ + CLEAR_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} +#endif /*SYSCFG_PMCR_BOOSTEN*/ +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_PMCR I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n + * SYSCFG_PMCR I2Cx_FMP LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C5 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->PMCR, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll SYSCFG_PMCR I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n + * SYSCFG_PMCR I2Cx_FMP LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*) + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 + * @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C5 (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->PMCR, ConfigFastModePlus); +} + +/** + * @brief Configure source input for the EXTI external interrupt. + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource + * @param Port This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF + * @arg @ref LL_SYSCFG_EXTI_PORTG + * @arg @ref LL_SYSCFG_EXTI_PORTH + * @arg @ref LL_SYSCFG_EXTI_PORTI (*) + * @arg @ref LL_SYSCFG_EXTI_PORTJ + * @arg @ref LL_SYSCFG_EXTI_PORTK + * + * (*) value not defined in all devices + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line) +{ + MODIFY_REG(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16U), Port << ((POSITION_VAL(Line >> 16U)) & 31U)); +} + +/** + * @brief Get the configured defined for specific EXTI Line + * @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n + * SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource + * @param Line This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_LINE0 + * @arg @ref LL_SYSCFG_EXTI_LINE1 + * @arg @ref LL_SYSCFG_EXTI_LINE2 + * @arg @ref LL_SYSCFG_EXTI_LINE3 + * @arg @ref LL_SYSCFG_EXTI_LINE4 + * @arg @ref LL_SYSCFG_EXTI_LINE5 + * @arg @ref LL_SYSCFG_EXTI_LINE6 + * @arg @ref LL_SYSCFG_EXTI_LINE7 + * @arg @ref LL_SYSCFG_EXTI_LINE8 + * @arg @ref LL_SYSCFG_EXTI_LINE9 + * @arg @ref LL_SYSCFG_EXTI_LINE10 + * @arg @ref LL_SYSCFG_EXTI_LINE11 + * @arg @ref LL_SYSCFG_EXTI_LINE12 + * @arg @ref LL_SYSCFG_EXTI_LINE13 + * @arg @ref LL_SYSCFG_EXTI_LINE14 + * @arg @ref LL_SYSCFG_EXTI_LINE15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_EXTI_PORTA + * @arg @ref LL_SYSCFG_EXTI_PORTB + * @arg @ref LL_SYSCFG_EXTI_PORTC + * @arg @ref LL_SYSCFG_EXTI_PORTD + * @arg @ref LL_SYSCFG_EXTI_PORTE + * @arg @ref LL_SYSCFG_EXTI_PORTF + * @arg @ref LL_SYSCFG_EXTI_PORTG + * @arg @ref LL_SYSCFG_EXTI_PORTH + * @arg @ref LL_SYSCFG_EXTI_PORTI (*) + * @arg @ref LL_SYSCFG_EXTI_PORTJ + * @arg @ref LL_SYSCFG_EXTI_PORTK + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line) +{ + return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0x3U], (Line >> 16U)) >> (POSITION_VAL(Line >> 16U) & 31U)); +} + +/** + * @brief Set connections to TIM1/8/15/16/17 and HRTIM Break inputs + * @note this feature is available on STM32H7 rev.B and above + * @rmtoll SYSCFG_CFGR AXISRAML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR ITCML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR DTCML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM1L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM2L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM3L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR SRAM4L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR BKRAML LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR CM7L LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR FLASHL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR PVDL LL_SYSCFG_SetTIMBreakInputs\n + * SYSCFG_CFGR_CM4L LL_SYSCFG_SetTIMBreakInputs + * @param Break This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_AXISRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_ITCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_DTCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM1_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM3_DBL_ECC (*) + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM4_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_BKRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_CM7_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_FLASH_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @arg @ref LL_SYSCFG_TIMBREAK_CM4_LOCKUP (available for dual core lines only) + * @retval None + * (*) value not defined in all devices + */ +__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break) +{ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM3L | SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | \ + SYSCFG_CFGR_PVDL | SYSCFG_CFGR_CM4L, Break); +#elif defined(SYSCFG_CFGR_AXISRAML) && defined(SYSCFG_CFGR_SRAM3L) + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM3L | SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | \ + SYSCFG_CFGR_PVDL, Break); +#elif defined(SYSCFG_CFGR_AXISRAML) + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL,\ + Break); +#else + MODIFY_REG(SYSCFG->CFGR, SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML |\ + SYSCFG_CFGR_CM7L | SYSCFG_CFGR_FLASHL | \ + SYSCFG_CFGR_PVDL, Break); +#endif /* DUAL_CORE */ +} + +/** + * @brief Get connections to TIM1/8/15/16/17 and HRTIM Break inputs + * @note this feature is available on STM32H7 rev.B and above + * @rmtoll SYSCFG_CFGR AXISRAML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR ITCML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR DTCML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM1L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM2L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM3L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR SRAM4L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR BKRAML LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR CM7L LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR FLASHL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR PVDL LL_SYSCFG_GetTIMBreakInputs\n + * SYSCFG_CFGR_CM4L LL_SYSCFG_GetTIMBreakInputs + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_SYSCFG_TIMBREAK_AXISRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_ITCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_DTCM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM1_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM3_DBL_ECC (*) + * @arg @ref LL_SYSCFG_TIMBREAK_SRAM4_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_BKRAM_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_CM7_LOCKUP + * @arg @ref LL_SYSCFG_TIMBREAK_FLASH_DBL_ECC + * @arg @ref LL_SYSCFG_TIMBREAK_PVD + * @arg @ref LL_SYSCFG_TIMBREAK_CM4_LOCKUP (available for dual core lines only) + * (*) value not defined in all devices + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void) +{ +#if defined(DUAL_CORE) + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | \ + SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | SYSCFG_CFGR_SRAM3L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL | SYSCFG_CFGR_CM4L)); +#elif defined (SYSCFG_CFGR_AXISRAML) && defined(SYSCFG_CFGR_SRAM3L) + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | \ + SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | SYSCFG_CFGR_SRAM3L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL )); +#elif defined (SYSCFG_CFGR_AXISRAML) + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_AXISRAML | SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | \ + SYSCFG_CFGR_SRAM1L | SYSCFG_CFGR_SRAM2L | \ + SYSCFG_CFGR_SRAM4L | SYSCFG_CFGR_BKRAML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL )); +#else + return (uint32_t)(READ_BIT(SYSCFG->CFGR, SYSCFG_CFGR_ITCML | SYSCFG_CFGR_DTCML | SYSCFG_CFGR_CM7L | \ + SYSCFG_CFGR_FLASHL | SYSCFG_CFGR_PVDL )); +#endif /* DUAL_CORE */ +} + +/** + * @brief Enable the Compensation Cell + * @rmtoll CCCSR EN LL_SYSCFG_EnableCompensationCell + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + +/** + * @brief Disable the Compensation Cell + * @rmtoll CCCSR EN LL_SYSCFG_DisableCompensationCell + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + +/** + * @brief Check if the Compensation Cell is enabled + * @rmtoll CCCSR EN LL_SYSCFG_IsEnabledCompensationCell + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledCompensationCell(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN) == SYSCFG_CCCSR_EN) ? 1UL : 0UL); +} + +/** + * @brief Get Compensation Cell ready Flag + * @rmtoll CCCSR READY LL_SYSCFG_IsActiveFlag_CMPCR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_READY) == (SYSCFG_CCCSR_READY)) ? 1UL : 0UL); +} + +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV0); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +#if defined(SYSCFG_CCCSR_HSLV1) +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV1 LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization1(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV1); +} + +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV2 LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization2(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV2); +} + +/** + * @brief Enable the I/O speed optimization when the product voltage is low. + * @rmtoll CCCSR HSLV3 LL_SYSCFG_EnableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_EnableIOSpeedOptimization3(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV3); +} +#endif /*SYSCFG_CCCSR_HSLV1*/ + + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV0); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +#if defined(SYSCFG_CCCSR_HSLV1) +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV1 LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization1(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV1); +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV2 LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization2(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV2); +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @rmtoll CCCSR HSLV3 LL_SYSCFG_DisableIOSpeedOptimize + * @note This bit is active only if IO_HSLV user option bit is set. It must be used only if the + * product supply voltage is below 2.7 V. Setting this bit when VDD is higher than 2.7 V + * might be destructive. + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_DisableIOSpeedOptimization3(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV3); +} +#endif /*SYSCFG_CCCSR_HSLV1*/ + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV) == SYSCFG_CCCSR_HSLV) ? 1UL : 0UL); +#else + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV0) == SYSCFG_CCCSR_HSLV0) ? 1UL : 0UL); +#endif /*SYSCFG_CCCSR_HSLV*/ +} + +#if defined(SYSCFG_CCCSR_HSLV1) +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV1 LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization1(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV1) == SYSCFG_CCCSR_HSLV1) ? 1UL : 0UL); +} + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV2 LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization2(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV2) == SYSCFG_CCCSR_HSLV2) ? 1UL : 0UL); +} + +/** + * @brief Check if the I/O speed optimization is enabled + * @rmtoll CCCSR HSLV3 LL_SYSCFG_IsEnabledIOSpeedOptimization + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIOSpeedOptimization3(void) +{ + return ((READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV3) == SYSCFG_CCCSR_HSLV3) ? 1UL : 0UL); +} +#endif /*SYSCFG_CCCSR_HSLV1*/ + +/** + * @brief Set the code selection for the I/O Compensation cell + * @rmtoll CCCSR CS LL_SYSCFG_SetCellCompensationCode + * @param CompCode: Selects the code to be applied for the I/O compensation cell + * This parameter can be one of the following values: + * @arg LL_SYSCFG_CELL_CODE : Select Code from the cell (available in the SYSCFG_CCVR) + * @arg LL_SYSCFG_REGISTER_CODE: Select Code from the SYSCFG compensation cell code register (SYSCFG_CCCR) + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCellCompensationCode(uint32_t CompCode) +{ + SET_BIT(SYSCFG->CCCSR, CompCode); +} + +/** + * @brief Get the code selected for the I/O Compensation cell + * @rmtoll CCCSR CS LL_SYSCFG_GetCellCompensationCode + * @retval Returned value can be one of the following values: + * @arg LL_SYSCFG_CELL_CODE : Selected Code is from the cell (available in the SYSCFG_CCVR) + * @arg LL_SYSCFG_REGISTER_CODE: Selected Code is from the SYSCFG compensation cell code register (SYSCFG_CCCR) + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetCellCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_CS)); +} + +#ifdef SYSCFG_CCCSR_CS_MMC + +/** + * @brief Get the code selected for the I/O Compensation cell on the VDDMMC power rail + * @rmtoll CCCSR CS LL_SYSCFG_GetCellCompensationCode + * @retval Returned value can be one of the following values: + * @arg LL_SYSCFG_CELL_CODE : Selected Code is from the cell (available in the SYSCFG_CCVR) + * @arg LL_SYSCFG_REGISTER_CODE: Selected Code is from the SYSCFG compensation cell code register (SYSCFG_CCCR) + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MMCGetCellCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_CS_MMC)); +} +#endif /*SYSCFG_CCCSR_CS_MMC*/ + +/** + * @brief Get I/O compensation cell value for PMOS transistors + * @rmtoll CCVR PCV LL_SYSCFG_GetPMOSCompensationValue + * @retval Returned value is the I/O compensation cell value for PMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPMOSCompensationValue(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCVR, SYSCFG_CCVR_PCV)); +} + +/** + * @brief Get I/O compensation cell value for NMOS transistors + * @rmtoll CCVR NCV LL_SYSCFG_GetNMOSCompensationValue + * @retval Returned value is the I/O compensation cell value for NMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetNMOSCompensationValue(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCVR, SYSCFG_CCVR_NCV)); +} + +/** + * @brief Set I/O compensation cell code for PMOS transistors + * @rmtoll CCCR PCC LL_SYSCFG_SetPMOSCompensationCode + * @param PMOSCode PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetPMOSCompensationCode(uint32_t PMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_PCC, PMOSCode); +} + +/** + * @brief Get I/O compensation cell code for PMOS transistors + * @rmtoll CCCR PCC LL_SYSCFG_GetPMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for PMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_PCC)); +} + +#ifdef SYSCFG_CCCR_PCC_MMC + +/** + * @brief Set I/O compensation cell code for PMOS transistors corresponding to the VDDMMC power rail + * @rmtoll CCCR PCC LL_SYSCFG_SetPMOSCompensationCode + * @param PMOSCode PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MMCSetPMOSCompensationCode(uint32_t PMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_PCC_MMC, PMOSCode); +} + +/** + * @brief Get I/O compensation cell code for PMOS transistors corresponding to the VDDMMC power rail + * @rmtoll CCCR PCC LL_SYSCFG_GetPMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for PMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MMCGetPMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_PCC_MMC)); +} +#endif /* SYSCFG_CCCR_PCC_MMC */ + +/** + * @brief Set I/O compensation cell code for NMOS transistors + * @rmtoll CCCR NCC LL_SYSCFG_SetNMOSCompensationCode + * @param NMOSCode NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetNMOSCompensationCode(uint32_t NMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC, NMOSCode); +} + +/** + * @brief Get I/O compensation cell code for NMOS transistors + * @rmtoll CCCR NCC LL_SYSCFG_GetNMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for NMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetNMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_NCC)); +} + +#ifdef SYSCFG_CCCR_NCC_MMC + +/** + * @brief Set I/O compensation cell code for NMOS transistors on the VDDMMC power rail. + * @rmtoll CCCR NCC LL_SYSCFG_SetNMOSCompensationCode + * @param NMOSCode: NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_VDMMCSetNMOSCompensationCode(uint32_t NMOSCode) +{ + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC_MMC, NMOSCode); +} + +/** + * @brief Get I/O compensation cell code for NMOS transistors on the VDDMMC power rail. + * @rmtoll CCCR NCC LL_SYSCFG_GetNMOSCompensationCode + * @retval Returned value is the I/O compensation cell code for NMOS transistors + */ +__STATIC_INLINE uint32_t LL_SYSCFG_VDMMCGetNMOSCompensationCode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->CCCR, SYSCFG_CCCR_NCC_MMC)); +} +#endif /*SYSCFG_CCCR_NCC_MMC*/ + +#ifdef SYSCFG_PKGR_PKG +/** + * @brief Get the device package + * @rmtoll PKGR PKG LL_SYSCFG_GetPackage + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_LQFP100_PACKAGE (*) + * @arg @ref LL_SYSCFG_TQFP144_PACKAGE (*) + * @arg @ref LL_SYSCFG_TQFP176_UFBGA176_PACKAGE (*) + * @arg @ref LL_SYSCFG_LQFP208_TFBGA240_PACKAGE (*) + * @arg @ref LL_SYSCFG_VFQFPN68_INDUS_PACKAGE (*) + * @arg @ref LL_SYSCFG_TFBGA100_LQFP100_PACKAGE (*) + * @arg @ref LL_SYSCFG_LQFP100_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_TFBGA100_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_WLCSP115_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_LQFP144_PACKAGE (**) + * @arg @ref LL_SYSCFG_UFBGA144_PACKAGE (**) + * @arg @ref LL_SYSCFG_LQFP144_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_UFBGA169_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_UFBGA176PLUS25_INDUS_PACKAGE (**) + * @arg @ref LL_SYSCFG_LQFP176_INDUS_PACKAGE (**) + * + * (*) : For stm32h74xxx and stm32h75xxx family lines. + * (**): For stm32h72xxx and stm32h73xxx family lines. + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetPackage(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->PKGR, SYSCFG_PKGR_PKG)); +} +#endif /*SYSCFG_PKGR_PKG*/ + +#ifdef SYSCFG_UR0_RDP +/** + * @brief Get the Flash memory protection level + * @rmtoll UR0 RDP LL_SYSCFG_GetFLashProtectionLevel + * @retval Returned value can be one of the following values: + * 0xAA : RDP level 0 + * 0xCC : RDP level 2 + * Any other value : RDP level 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFLashProtectionLevel(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR0, SYSCFG_UR0_RDP)); +} +#ifdef SYSCFG_UR0_BKS +/** + * @brief Indicate if the Flash memory bank addresses are inverted or not + * @rmtoll UR0 BKS LL_SYSCFG_IsFLashBankAddressesSwaped + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFLashBankAddressesSwaped(void) +{ + return ((READ_BIT(SYSCFG->UR0, SYSCFG_UR0_BKS) == 0U) ? 1UL : 0UL); +} +#endif /*SYSCFG_UR0_BKS*/ + +/** + * @brief Get the BOR Threshold Reset Level + * @rmtoll UR2 BORH LL_SYSCFG_GetBrownoutResetLevel + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_BOR_HIGH_RESET_LEVEL + * @arg @ref LL_SYSCFG_BOR_MEDIUM_RESET_LEVEL + * @arg @ref LL_SYSCFG_BOR_LOW_RESET_LEVEL + * @arg @ref LL_SYSCFG_BOR_OFF_RESET_LEVEL + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetBrownoutResetLevel(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR2, SYSCFG_UR2_BORH)); +} +/** + * @brief BootCM7 address 0 configuration + * @rmtoll UR2 BOOT_ADD0 LL_SYSCFG_SetCM7BootAddress0 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address0 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM7BootAddress0(uint16_t BootAddress) +{ + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0, ((uint32_t)BootAddress << SYSCFG_UR2_BCM7_ADD0_Pos)); +#else + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0, ((uint32_t)BootAddress << SYSCFG_UR2_BOOT_ADD0_Pos)); +#endif /*DUAL_CORE*/ + +} + +/** + * @brief Get BootCM7 address 0 + * @rmtoll UR2 BOOT_ADD0 LL_SYSCFG_GetCM7BootAddress0 + * @retval Returned the CM7 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM7BootAddress0(void) +{ + /* Get CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + return (uint16_t)((uint32_t)READ_BIT(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0) >> SYSCFG_UR2_BCM7_ADD0_Pos); +#else + return (uint16_t)((uint32_t)READ_BIT(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0) >> SYSCFG_UR2_BOOT_ADD0_Pos); +#endif /*DUAL_CORE*/ +} + +/** + * @brief BootCM7 address 1 configuration + * @rmtoll UR3 BOOT_ADD1 LL_SYSCFG_SetCM7BootAddress1 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address1 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM7BootAddress1(uint16_t BootAddress) +{ + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1, BootAddress); +#else + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1, BootAddress); +#endif /*DUAL_CORE*/ +} + +/** + * @brief Get BootCM7 address 1 + * @rmtoll UR3 BOOT_ADD1 LL_SYSCFG_GetCM7BootAddress1 + * @retval Returned the CM7 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM7BootAddress1(void) +{ + /* Get CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + return (uint16_t)(READ_BIT(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1)); +#else + return (uint16_t)(READ_BIT(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1)); +#endif /* DUAL_CORE */ +} + +#if defined(DUAL_CORE) +/** + * @brief BootCM4 address 0 configuration + * @rmtoll UR3 BCM4_ADD0 LL_SYSCFG_SetCM4BootAddress0 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address0 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM4BootAddress0(uint16_t BootAddress) +{ + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0, ((uint32_t)BootAddress << SYSCFG_UR3_BCM4_ADD0_Pos)); +} + +/** + * @brief Get BootCM4 address 0 + * @rmtoll UR3 BCM4_ADD0 LL_SYSCFG_GetCM4BootAddress0 + * @retval Returned the CM4 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM4BootAddress0(void) +{ + /* Get CM4 BOOT ADD0 */ + return (uint16_t)((uint32_t)READ_BIT(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0) >> SYSCFG_UR3_BCM4_ADD0_Pos); +} + +/** + * @brief BootCM4 address 1 configuration + * @rmtoll UR4 BCM4_ADD1 LL_SYSCFG_SetCM4BootAddress1 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address1 + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetCM4BootAddress1(uint16_t BootAddress) +{ + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1, BootAddress); +} + +/** + * @brief Get BootCM4 address 1 + * @rmtoll UR4 BCM4_ADD1 LL_SYSCFG_GetCM4BootAddress1 + * @retval Returned the CM4 Boot Address0 + */ +__STATIC_INLINE uint16_t LL_SYSCFG_GetCM4BootAddress1(void) +{ + /* Get CM4 BOOT ADD0 */ + return (uint16_t)(READ_BIT(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1)); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Indicates if the flash protected area (Bank 1) is erased by a mass erase + * @rmtoll UR4 MEPAD_BANK1 LL_SYSCFG_IsFlashB1ProtectedAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1ProtectedAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR4, SYSCFG_UR4_MEPAD_BANK1) == SYSCFG_UR4_MEPAD_BANK1) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the flash secured area (Bank 1) is erased by a mass erase + * @rmtoll UR5 MESAD_BANK1 LL_SYSCFG_IsFlashB1SecuredAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1SecuredAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_MESAD_BANK1) == SYSCFG_UR5_MESAD_BANK1) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 0 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector0WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector0WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR0_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 1 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector1WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector1WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR1_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 2 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector2WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector2WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR2_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 3 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector3WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector3WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR3_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 4 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector4WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector4WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR4_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 5 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector5WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector5WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR5_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 6 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector6WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector6WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR6_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 7 of the Flash memory bank 1 is write protected + * @rmtoll UR5 WRPN_BANK1 LL_SYSCFG_IsFlashB1Sector7WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB1Sector7WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR5, SYSCFG_UR5_WRPN_BANK1) == (SYSCFG_UR5_WRPN_BANK1 & LL_SYSCFG_FLASH_B1_SECTOR7_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Get the protected area start address for Flash bank 1 + * @rmtoll UR6 PABEG_BANK1 LL_SYSCFG_GetFlashB1ProtectedAreaStartAddress + * @retval Returned the protected area start address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1ProtectedAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR6, SYSCFG_UR6_PABEG_BANK1)); +} + +/** + * @brief Get the protected area end address for Flash bank 1 + * @rmtoll UR6 PAEND_BANK1 LL_SYSCFG_GetFlashB1ProtectedAreaEndAddress + * @retval Returned the protected area end address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1ProtectedAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR6, SYSCFG_UR6_PAEND_BANK1)); +} + +/** + * @brief Get the secured area start address for Flash bank 1 + * @rmtoll UR7 SABEG_BANK1 LL_SYSCFG_GetFlashB1SecuredAreaStartAddress + * @retval Returned the secured area start address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1SecuredAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR7, SYSCFG_UR7_SABEG_BANK1)); +} + +/** + * @brief Get the secured area end address for Flash bank 1 + * @rmtoll UR7 SAEND_BANK1 LL_SYSCFG_GetFlashB1SecuredAreaEndAddress + * @retval Returned the secured area end address for Flash bank 1 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB1SecuredAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR7, SYSCFG_UR7_SAEND_BANK1)); +} + +#ifdef SYSCFG_UR8_MEPAD_BANK2 +/** + * @brief Indicates if the flash protected area (Bank 2) is erased by a mass erase + * @rmtoll UR8 MEPAD_BANK2 LL_SYSCFG_IsFlashB2ProtectedAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2ProtectedAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR8, SYSCFG_UR8_MEPAD_BANK2) == SYSCFG_UR8_MEPAD_BANK2) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the flash secured area (Bank 2) is erased by a mass erase + * @rmtoll UR8 MESAD_BANK2 LL_SYSCFG_IsFlashB2SecuredAreaErasable + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2SecuredAreaErasable(void) +{ + return ((READ_BIT(SYSCFG->UR8, SYSCFG_UR8_MESAD_BANK2) == SYSCFG_UR8_MESAD_BANK2) ? 1UL : 0UL); +} +#endif /*SYSCFG_UR8_MEPAD_BANK2*/ + +#ifdef SYSCFG_UR9_WRPN_BANK2 +/** + * @brief Indicates if the sector 0 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector0WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector0WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR0_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 1 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector1WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector1WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR1_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 2 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector2WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector2WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR2_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 3 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector3WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector3WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR3_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 4 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector4WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector4WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR4_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 5 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector5WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector5WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR5_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 6 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector6WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector6WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR6_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the sector 7 of the Flash memory bank 2 is write protected + * @rmtoll UR9 WRPN_BANK2 LL_SYSCFG_IsFlashB2Sector7WriteProtected + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsFlashB2Sector7WriteProtected(void) +{ + return ((READ_BIT(SYSCFG->UR9, SYSCFG_UR9_WRPN_BANK2) == (SYSCFG_UR9_WRPN_BANK2 & LL_SYSCFG_FLASH_B2_SECTOR7_STATUS_BIT)) ? 1UL : 0UL); +} + +/** + * @brief Get the protected area start address for Flash bank 2 + * @rmtoll UR9 PABEG_BANK2 LL_SYSCFG_GetFlashB2ProtectedAreaStartAddress + * @retval Returned the protected area start address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2ProtectedAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR9, SYSCFG_UR9_PABEG_BANK2)); +} +#endif /*SYSCFG_UR9_WRPN_BANK2*/ + +#ifdef SYSCFG_UR10_PAEND_BANK2 +/** + * @brief Get the protected area end address for Flash bank 2 + * @rmtoll UR10 PAEND_BANK2 LL_SYSCFG_GetFlashB2ProtectedAreaEndAddress + * @retval Returned the protected area end address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2ProtectedAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR10, SYSCFG_UR10_PAEND_BANK2)); +} + +/** + * @brief Get the secured area start address for Flash bank 2 + * @rmtoll UR10 SABEG_BANK2 LL_SYSCFG_GetFlashB2SecuredAreaStartAddress + * @retval Returned the secured area start address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2SecuredAreaStartAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR10, SYSCFG_UR10_SABEG_BANK2)); +} +#endif /*SYSCFG_UR10_PAEND_BANK2*/ + +#ifdef SYSCFG_UR11_SAEND_BANK2 +/** + * @brief Get the secured area end address for Flash bank 2 + * @rmtoll UR11 SAEND_BANK2 LL_SYSCFG_GetFlashB2SecuredAreaEndAddress + * @retval Returned the secured area end address for Flash bank 2 + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashB2SecuredAreaEndAddress(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR11, SYSCFG_UR11_SAEND_BANK2)); +} +#endif /*SYSCFG_UR11_SAEND_BANK2*/ + +/** + * @brief Get the Independent Watchdog 1 control mode (Software or Hardware) + * @rmtoll UR11 IWDG1M LL_SYSCFG_GetIWDG1ControlMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IWDG1_SW_CONTROL_MODE + * @arg @ref LL_SYSCFG_IWDG1_HW_CONTROL_MODE + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIWDG1ControlMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR11, SYSCFG_UR11_IWDG1M)); +} + +#if defined (DUAL_CORE) +/** + * @brief Get the Independent Watchdog 2 control mode (Software or Hardware) + * @rmtoll UR12 IWDG2M LL_SYSCFG_GetIWDG2ControlMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_IWDG2_SW_CONTROL_MODE + * @arg @ref LL_SYSCFG_IWDG2_HW_CONTROL_MODE + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetIWDG2ControlMode(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR12, SYSCFG_UR12_IWDG2M)); +} +#endif /* DUAL_CORE */ + +/** + * @brief Indicates the Secure mode status + * @rmtoll UR12 SECURE LL_SYSCFG_IsSecureModeEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsSecureModeEnabled(void) +{ + return ((READ_BIT(SYSCFG->UR12, SYSCFG_UR12_SECURE) == SYSCFG_UR12_SECURE) ? 1UL : 0UL); +} + +/** + * @brief Indicates if a reset is generated when D1 domain enters DStandby mode + * @rmtoll UR13 D1SBRST LL_SYSCFG_IsD1StandbyGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD1StandbyGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR13, SYSCFG_UR13_D1SBRST) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Get the secured DTCM RAM size + * @rmtoll UR13 SDRS LL_SYSCFG_GetSecuredDTCMSize + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_2KB + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_4KB + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_8KB + * @arg @ref LL_SYSCFG_DTCM_RAM_SIZE_16KB + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetSecuredDTCMSize(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR13, SYSCFG_UR13_SDRS)); +} + +/** + * @brief Indicates if a reset is generated when D1 domain enters DStop mode + * @rmtoll UR14 D1STPRST LL_SYSCFG_IsD1StopGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD1StopGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR14, SYSCFG_UR14_D1STPRST) == 0U) ? 1UL : 0UL); +} + +#if defined (DUAL_CORE) +/** + * @brief Indicates if a reset is generated when D2 domain enters DStandby mode + * @rmtoll UR14 D2SBRST LL_SYSCFG_IsD2StandbyGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD2StandbyGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR14, SYSCFG_UR14_D2SBRST) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Indicates if a reset is generated when D2 domain enters DStop mode + * @rmtoll UR15 D2STPRST LL_SYSCFG_IsD2StopGenerateReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsD2StopGenerateReset(void) +{ + return ((READ_BIT(SYSCFG->UR15, SYSCFG_UR15_D2STPRST) == 0U) ? 1UL : 0UL); +} +#endif /* DUAL_CORE */ + +/** + * @brief Indicates if the independent watchdog is frozen in Standby mode + * @rmtoll UR15 FZIWDGSTB LL_SYSCFG_IsIWDGFrozenInStandbyMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsIWDGFrozenInStandbyMode(void) +{ + return ((READ_BIT(SYSCFG->UR15, SYSCFG_UR15_FZIWDGSTB) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the independent watchdog is frozen in Stop mode + * @rmtoll UR16 FZIWDGSTP LL_SYSCFG_IsIWDGFrozenInStopMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsIWDGFrozenInStopMode(void) +{ + return ((READ_BIT(SYSCFG->UR16, SYSCFG_UR16_FZIWDGSTP) == 0U) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the device private key is programmed + * @rmtoll UR16 PKP LL_SYSCFG_IsPrivateKeyProgrammed + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsPrivateKeyProgrammed(void) +{ + return ((READ_BIT(SYSCFG->UR16, SYSCFG_UR16_PKP) == SYSCFG_UR16_PKP) ? 1UL : 0UL); +} + +/** + * @brief Indicates if the Product is working on the full voltage range or not + * @rmtoll UR17 IOHSLV LL_SYSCFG_IsActiveFlag_IOHSLV + * @note When the IOHSLV option bit is set the Product is working below 2.7 V. + * When the IOHSLV option bit is reset the Product is working on the + * full voltage range. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_IOHSLV(void) +{ + return ((READ_BIT(SYSCFG->UR17, SYSCFG_UR17_IOHSLV) == SYSCFG_UR17_IOHSLV) ? 1UL : 0UL); +} + +#ifdef SYSCFG_UR17_TCM_AXI_CFG +/** + * @brief Get the size of ITCM-RAM and AXI-SRAM + * @rmtoll UR17 TCM_AXI_CFG LL_SYSCFG_Get_ITCM_AXI_RAM_Size + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSCFG_ITCM_AXI_64KB_320KB + * @arg @ref LL_SYSCFG_ITCM_AXI_128KB_256KB + * @arg @ref LL_SYSCFG_ITCM_AXI_192KB_192KB + * @arg @ref LL_SYSCFG_ITCM_AXI_256KB_128KB + */ +__STATIC_INLINE uint32_t LL_SYSCFG_Get_ITCM_AXI_RAM_Size(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->UR17, SYSCFG_UR17_TCM_AXI_CFG)); +} +#endif /*SYSCFG_UR17_TCM_AXI_CFG*/ + +#ifdef SYSCFG_UR18_CPU_FREQ_BOOST +/** + * @brief Indicates if the CPU maximum frequency boost is enabled + * @rmtoll UR18 CPU_FREQ_BOOST LL_SYSCFG_IsCpuFreqBoostEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsCpuFreqBoostEnabled(void) +{ + return ((READ_BIT(SYSCFG->UR18, SYSCFG_UR18_CPU_FREQ_BOOST) == SYSCFG_UR18_CPU_FREQ_BOOST) ? 1UL : 0UL); +} +#endif /*SYSCFG_UR18_CPU_FREQ_BOOST*/ + +#endif /*SYSCFG_UR0_RDP*/ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU + * @{ + */ + +/** + * @brief Return the device identifier + * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); +} + +/** + * @brief Return the device revision identifier + * @note This field indicates the revision of the device. + For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001 + * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID + * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); +} + +/** + * @brief Enable D1 Domain/CDomain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D1/DBGSLEEP_CD LL_DBGMCU_EnableD1DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugInSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Disable D1 Domain/CDomain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D1/DBGSLEEP_CD LL_DBGMCU_DisableD1DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugInSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Enable D1 Domain/CDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D1/DBGSLEEP_CD LL_DBGMCU_EnableD1DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugInStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Disable D1 Domain/CDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D1/DBGSLEEP_CD LL_DBGMCU_DisableD1DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugInStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Enable D1 Domain/CDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D1/DBGSLEEP_CD LL_DBGMCU_EnableD1DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugInStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +/** + * @brief Disable D1 Domain/CDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D1/DBGSLEEP_CD LL_DBGMCU_DisableD1DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugInStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +#if defined (DUAL_CORE) +/** + * @brief Enable D2 Domain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D2 LL_DBGMCU_EnableD2DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD2DebugInSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Disable D2 Domain debug during SLEEP mode + * @rmtoll DBGMCU_CR DBGSLEEP_D2 LL_DBGMCU_DisableD2DebugInSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD2DebugInSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Enable D2 Domain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D2 LL_DBGMCU_EnableD2DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD2DebugInStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Disable D2 Domain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D2 LL_DBGMCU_DisableD2DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD2DebugInStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Enable D2 Domain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D2 LL_DBGMCU_EnableD2DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD2DebugInStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} + +/** + * @brief Disable D2 Domain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D2 LL_DBGMCU_DisableD2DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD2DebugInStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} +#endif /* DUAL_CORE */ + + +#if defined(DBGMCU_CR_DBG_STOPD3) +/** + * @brief Enable D3 Domain/SRDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D3/DBGSTOP_SRD LL_DBGMCU_EnableD3DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD3DebugInStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} + +/** + * @brief Disable D3 Domain/SRDomain debug during STOP mode + * @rmtoll DBGMCU_CR DBGSTOP_D3/DBGSTOP_SRD LL_DBGMCU_DisableD3DebugInStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD3DebugInStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} +#endif /*DBGMCU_CR_DBG_STOPD3*/ + +#if defined(DBGMCU_CR_DBG_STANDBYD3) +/** + * @brief Enable D3 Domain/SRDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D3/DBGSTBY_SRD LL_DBGMCU_EnableD3DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD3DebugInStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} + +/** + * @brief Disable D3 Domain/SRDomain debug during STANDBY mode + * @rmtoll DBGMCU_CR DBGSTBY_D3/DBGSTBY_SRD LL_DBGMCU_DisableD3DebugInStandbyMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD3DebugInStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ + +/** + * @brief Enable the trace port clock + * @rmtoll DBGMCU_CR TRACECKEN LL_DBGMCU_EnableTracePortClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableTracePortClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TRACECKEN); +} + +/** + * @brief Disable the trace port clock + * @rmtoll DBGMCU_CR TRACECKEN LL_DBGMCU_DisableTracePortClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableTracePortClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TRACECKEN); +} + +/** + * @brief Enable the Domain1/CDomain debug clock enable + * @rmtoll DBGMCU_CR CKD1EN/CKCDEN LL_DBGMCU_EnableD1DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD1DebugClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD1EN); +} + +/** + * @brief Disable the Domain1/CDomain debug clock enable + * @rmtoll DBGMCU_CR CKD1EN/CKCDEN LL_DBGMCU_DisableD1DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD1DebugClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD1EN); +} + +/** + * @brief Enable the Domain3/SRDomain debug clock enable + * @rmtoll DBGMCU_CR CKD3EN/CKSRDEN LL_DBGMCU_EnableD3DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableD3DebugClock(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD3EN); +} + +/** + * @brief Disable the Domain3/SRDomain debug clock enable + * @rmtoll DBGMCU_CR CKD3EN/CKSRDEN LL_DBGMCU_DisableD3DebugClock + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableD3DebugClock(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CKD3EN); +} + +#define LL_DBGMCU_TRGIO_INPUT_DIRECTION 0U +#define LL_DBGMCU_TRGIO_OUTPUT_DIRECTION DBGMCU_CR_DBG_TRGOEN +/** + * @brief Set the direction of the bi-directional trigger pin TRGIO + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_SetExternalTriggerPinDirection\n + * @param PinDirection This parameter can be one of the following values: + * @arg @ref LL_DBGMCU_TRGIO_INPUT_DIRECTION + * @arg @ref LL_DBGMCU_TRGIO_OUTPUT_DIRECTION + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_SetExternalTriggerPinDirection(uint32_t PinDirection) +{ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_DBG_TRGOEN, PinDirection); +} + +/** + * @brief Get the direction of the bi-directional trigger pin TRGIO + * @rmtoll DBGMCU_CR TRGOEN LL_DBGMCU_GetExternalTriggerPinDirection\n + * @retval Returned value can be one of the following values: + * @arg @ref LL_DBGMCU_TRGIO_INPUT_DIRECTION + * @arg @ref LL_DBGMCU_TRGIO_OUTPUT_DIRECTION + */ +__STATIC_INLINE uint32_t LL_DBGMCU_GetExternalTriggerPinDirection(void) +{ + return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TRGOEN)); +} + +/** + * @brief Freeze APB1 group1 peripherals + * @rmtoll DBGMCU_APB1LFZ1 TIM2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM4 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM6 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM7 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM12 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM13 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM14 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 LPTIM1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n (*) + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C5_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1LFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1LFZ1 TIM2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM4 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM6 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM7 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM12 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM13 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 TIM14 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 LPTIM1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C1 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C2 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C3 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * DBGMCU_APB1LFZ1 I2C5 LL_DBGMCU_APB1_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C5_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1LFZ1, Periphs); +} + +#ifdef DBGMCU_APB1HFZ1_DBG_FDCAN +/** + * @brief Freeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 FDCAN LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_FDCAN_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1HFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 FDCAN LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_FDCAN_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1HFZ1, Periphs); +} +#endif /*DBGMCU_APB1HFZ1_DBG_FDCAN*/ + +#if defined(TIM23) || defined(TIM24) +/** + * @brief Freeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 TIM23 LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * DBGMCU_APB1HFZ1 TIM24 LL_DBGMCU_APB1_GRP2_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM23_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM24_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB1HFZ1, Periphs); +} + +/** + * @brief Unfreeze APB1 group2 peripherals + * @rmtoll DBGMCU_APB1HFZ1 TIM23 LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + DBGMCU_APB1HFZ1 TIM24 LL_DBGMCU_APB1_GRP2_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM23_STOP + * @arg @ref LL_DBGMCU_APB1_GRP2_TIM24_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB1HFZ1, Periphs); +} +#endif /* TIM23 || TIM24 */ + +/** + * @brief Freeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZ1 TIM1 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM8 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM15 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM16 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM17 LL_DBGMCU_APB2_GRP1_FreezePeriph + * DBGMCU_APB2FZ1 HRTIM LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB2FZ1, Periphs); +} + +/** + * @brief Unfreeze APB2 peripherals + * @rmtoll DBGMCU_APB2FZ1 TIM1 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM8 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM15 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM16 LL_DBGMCU_APB2_GRP1_FreezePeriph\n + * DBGMCU_APB2FZ1 TIM17 LL_DBGMCU_APB2_GRP1_FreezePeriph + * DBGMCU_APB2FZ1 HRTIM LL_DBGMCU_APB2_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP + * @arg @ref LL_DBGMCU_APB2_GRP1_HRTIM_STOP (*) + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB2FZ1, Periphs); +} + +/** + * @brief Freeze APB3 peripherals + * @rmtoll DBGMCU_APB3FZ1 WWDG1 LL_DBGMCU_APB3_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB3_GRP1_WWDG1_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB3_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB3FZ1, Periphs); +} + +/** + * @brief Unfreeze APB3 peripherals + * @rmtoll DBGMCU_APB3FZ1 WWDG1 LL_DBGMCU_APB3_GRP1_UnFreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB3_GRP1_WWDG1_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB3_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB3FZ1, Periphs); +} + +/** + * @brief Freeze APB4 peripherals + * @rmtoll DBGMCU_APB4FZ1 I2C4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM2 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM3 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM5 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 RTC LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 WDGLSD1 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB4_GRP1_I2C4_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM2_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM3_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_IWDG1_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB4_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->APB4FZ1, Periphs); +} + +/** + * @brief Unfreeze APB4 peripherals + * @rmtoll DBGMCU_APB4FZ1 I2C4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM2 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM3 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM4 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 LPTIM5 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 RTC LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @rmtoll DBGMCU_APB4FZ1 WDGLSD1 LL_DBGMCU_APB4_GRP1_FreezePeriph\n + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB4_GRP1_I2C4_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM2_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM3_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM4_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_LPTIM5_STOP (*) + * @arg @ref LL_DBGMCU_APB4_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB4_GRP1_IWDG1_STOP + * + * (*) value not defined in all devices + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB4_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->APB4FZ1, Periphs); +} +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg @ref LL_FLASH_LATENCY_0 + * @arg @ref LL_FLASH_LATENCY_1 + * @arg @ref LL_FLASH_LATENCY_2 + * @arg @ref LL_FLASH_LATENCY_3 + * @arg @ref LL_FLASH_LATENCY_4 + * @arg @ref LL_FLASH_LATENCY_5 + * @arg @ref LL_FLASH_LATENCY_6 + * @arg @ref LL_FLASH_LATENCY_7 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); +} + +/** + * @} + */ + +#if defined(DUAL_CORE) +/** @defgroup SYSTEM_LL_EF_ART ART + * @{ + */ + +/** + * @brief Enable the Cortex-M4 ART cache. + * @rmtoll ART_CTR EN LL_ART_Enable + * @retval None + */ +__STATIC_INLINE void LL_ART_Enable(void) +{ + SET_BIT(ART->CTR, ART_CTR_EN); +} + +/** + * @brief Disable the Cortex-M4 ART cache. + * @rmtoll ART_CTR EN LL_ART_Disable + * @retval None + */ +__STATIC_INLINE void LL_ART_Disable(void) +{ + CLEAR_BIT(ART->CTR, ART_CTR_EN); +} + +/** + * @brief Check if the Cortex-M4 ART cache is enabled + * @rmtoll ART_CTR EN LL_ART_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ART_IsEnabled(void) +{ + return ((READ_BIT(ART->CTR, ART_CTR_EN) == ART_CTR_EN) ? 1UL : 0UL); +} + +/** + * @brief Set the Cortex-M4 ART cache Base Address. + * @rmtoll ART_CTR PCACHEADDR LL_ART_SetBaseAddress + * @param BaseAddress Specifies the Base address of 1 Mbyte address page (cacheable page) + from which the ART accelerator loads code to the cache. + * @retval None + */ +__STATIC_INLINE void LL_ART_SetBaseAddress(uint32_t BaseAddress) +{ + MODIFY_REG(ART->CTR, ART_CTR_PCACHEADDR, (((BaseAddress) >> 12U) & 0x000FFF00UL)); +} + +/** + * @brief Get the Cortex-M4 ART cache Base Address. + * @rmtoll ART_CTR PCACHEADDR LL_ART_GetBaseAddress + * @retval the Base address of 1 Mbyte address page (cacheable page) + from which the ART accelerator loads code to the cache + */ +__STATIC_INLINE uint32_t LL_ART_GetBaseAddress(void) +{ + return (uint32_t)(READ_BIT(ART->CTR, ART_CTR_PCACHEADDR) << 12U); +} +#endif /* DUAL_CORE */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_LL_SYSTEM_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h new file mode 100644 index 0000000..635ea59 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_utils.h @@ -0,0 +1,401 @@ +/** + ****************************************************************************** + * @file stm32h7xx_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_LL_UTILS_H +#define STM32H7xx_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx.h" +#include "stm32h7xx_ll_system.h" +#include "stm32h7xx_ll_bus.h" + +/** @addtogroup STM32H7xx_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ +/** + * @brief UTILS PLL structure definition + */ +typedef struct +{ + uint32_t PLLM; /*!< Division factor for PLL VCO input clock. + This parameter must be a number between Min_Data = 0 and Max_Data = 63 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetM(). */ + + uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock. + This parameter must be a number between Min_Data = 4 and Max_Data = 512 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetN(). */ + + uint32_t PLLP; /*!< Division for the main system clock. + This parameter must be a number between Min_Data = 2 and Max_Data = 128 + odd division factors are not allowed + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetP(). */ + + uint32_t FRACN; /*!< Fractional part of the multiplication factor for PLL VCO. + This parameter can be a value between 0 and 8191 + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetFRACN(). */ + + uint32_t VCO_Input; /*!< PLL clock Input range. + This parameter can be a value of @ref RCC_LL_EC_PLLINPUTRANGE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetVCOInputRange(). */ + + uint32_t VCO_Output; /*!< PLL clock Output range. + This parameter can be a value of @ref RCC_LL_EC_PLLVCORANGE + + This feature can be modified afterwards using unitary function + @ref LL_RCC_PLL1_SetVCOOutputRange(). */ + +} LL_UTILS_PLLInitTypeDef; + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{ + uint32_t SYSCLKDivider; /*!< The System clock (SYSCLK) divider. This clock is derived from the PLL output. + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetSysPrescaler(). */ + + uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_AHB_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAHBPrescaler(). */ + + uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB1_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB1Prescaler(). */ + + uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB2_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB2Prescaler(). */ + + uint32_t APB3CLKDivider; /*!< The APB2 clock (PCLK3) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB3_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB3Prescaler(). */ + + uint32_t APB4CLKDivider; /*!< The APB4 clock (PCLK4) divider. This clock is derived from the AHB clock (HCLK). + This parameter can be a value of @ref RCC_LL_EC_APB4_DIV + + This feature can be modified afterwards using unitary function + @ref LL_RCC_SetAPB4Prescaler(). */ + +} LL_UTILS_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#if (STM32H7_DEV_ID == 0x450UL) +#define LL_UTILS_PACKAGETYPE_LQFP100 LL_SYSCFG_LQFP100_PACKAGE /*!< LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_TQFP144 LL_SYSCFG_TQFP144_PACKAGE /*!< TQFP144 package type */ +#define LL_UTILS_PACKAGETYPE_TQFP176_UFBGA176 LL_SYSCFG_TQFP176_UFBGA176_PACKAGE /*!< TQFP176 or UFBGA176 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP208_TFBGA240 LL_SYSCFG_LQFP208_TFBGA240_PACKAGE /*!< LQFP208 or TFBGA240 package type */ +#elif (STM32H7_DEV_ID == 0x480UL) +#define LL_UTILS_PACKAGETYPE_LQFP64 0x00000000UL /*!< LQFP64 package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_LQFP100 0x00000001UL /*!< TFBGA100 or LQFP100 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_SMPS 0x00000002UL /*!< LQFP100 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_SMPS 0x00000003UL /*!< TFBGA100 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP132_SMPS 0x00000004UL /*!< WLCSP132 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144 0x00000005UL /*!< LQFP144 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_SMPS 0x00000006UL /*!< LQFP144 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169 0x00000007UL /*!< UFBGA169 package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176_LQFP176 0x00000008UL /*!< UFBGA176 or LQFP176 package type */ +#define LL_UTILS_PACKAGETYPE_LQFP176_SMPS 0x00000009UL /*!< LQFP176 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176_SMPS 0x0000000AUL /*!< UFBGA176 with SMPS package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA216 0x0000000CUL /*!< TFBGA216 package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA225 0x0000000EUL /*!< TFBGA225 package type */ +#elif (STM32H7_DEV_ID == 0x483UL) +#define LL_UTILS_PACKAGETYPE_VFQFPN68_INDUS LL_SYSCFG_VFQFPN68_INDUS_PACKAGE /*!< VFQFPN68 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_LQFP100 LL_SYSCFG_TFBGA100_LQFP100_PACKAGE /*!< TFBGA100 or LQFP100 Legacy package type */ +#define LL_UTILS_PACKAGETYPE_LQFP100_INDUS LL_SYSCFG_LQFP100_INDUS_PACKAGE /*!< LQFP100 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_TFBGA100_INDUS LL_SYSCFG_TFBGA100_INDUS_PACKAGE /*!< TFBGA100 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_WLCSP115_INDUS LL_SYSCFG_WLCSP115_INDUS_PACKAGE /*!< WLCSP115 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144 LL_SYSCFG_LQFP144_PACKAGE /*!< LQFP144 Legacy package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA144 LL_SYSCFG_UFBGA144_PACKAGE /*!< UFBGA144 Legacy package type */ +#define LL_UTILS_PACKAGETYPE_LQFP144_INDUS LL_SYSCFG_LQFP144_INDUS_PACKAGE /*!< LQFP144 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA169_INDUS LL_SYSCFG_UFBGA169_INDUS_PACKAGE /*!< UFBGA169 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_UFBGA176PLUS25_INDUS LL_SYSCFG_UFBGA176PLUS25_INDUS_PACKAGE /*!< UFBGA176+25 Industrial package type */ +#define LL_UTILS_PACKAGETYPE_LQFP176_INDUS LL_SYSCFG_LQFP176_INDUS_PACKAGE /*!< LQFP176 Industrial package type */ +#endif /* STM32H7_DEV_ID == 0x450UL */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 96 bits) + * @retval UID[31:0] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 96 bits) + * @retval UID[63:32] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Word2 of the unique device identifier (UID based on 96 bits) + * @retval UID[95:64] + */ +__STATIC_INLINE uint32_t LL_GetUID_Word2(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the size of the device Flash memory expressed in + * Kbytes. As an example, 0x040 corresponds to 64 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS))); +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100 + * @arg @ref LL_UTILS_PACKAGETYPE_TQFP144 + * @arg @ref LL_UTILS_PACKAGETYPE_TQFP176_UFBGA176 + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP208_TFBGA240 + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP64 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_LQFP100 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP132_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176_LQFP176 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176_SMPS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA216 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA225 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_VFQFPN68_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_TFBGA100_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_WLCSP115_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA144 (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_UFBGA176+25_INDUS (*) + * @arg @ref LL_UTILS_PACKAGETYPE_LQFP176_INDUS (*) + * + * (*) Packages available on some STM32H7 lines only. + * @note For some SM32H7 lines, enabling the SYSCFG clock is mandatory. + the SYSCFG clock enabling is ensured by LL_APB4_GRP1_EnableClock + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ +#if defined(SYSCFG_PKGR_PKG) + + return LL_SYSCFG_GetPackage(); +#else + return (uint16_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS))); + +#endif /* SYSCFG_PKGR_PKG */ +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */ +} + +void LL_Init1msTick(uint32_t CPU_Frequency); +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t CPU_Frequency); +ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, + uint32_t HSEBypass, + LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, + LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct); +ErrorStatus LL_SetFlashLatency(uint32_t HCLK_Frequency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_LL_UTILS_H */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c new file mode 100644 index 0000000..cd71d08 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c @@ -0,0 +1,1311 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** + * @brief STM32H7xx HAL Driver version number V1.11.1 + */ +#define __STM32H7xx_HAL_VERSION_MAIN (0x01UL) /*!< [31:24] main version */ +#define __STM32H7xx_HAL_VERSION_SUB1 (0x0BUL) /*!< [23:16] sub1 version */ +#define __STM32H7xx_HAL_VERSION_SUB2 (0x01UL) /*!< [15:8] sub2 version */ +#define __STM32H7xx_HAL_VERSION_RC (0x00UL) /*!< [7:0] release candidate */ +#define __STM32H7xx_HAL_VERSION ((__STM32H7xx_HAL_VERSION_MAIN << 24)\ + |(__STM32H7xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32H7xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32H7xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) +#define VREFBUF_TIMEOUT_VALUE (uint32_t)10 /* 10 ms */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Exported variables --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Group1 + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface the NVIC allocation and initial clock + configuration. It initializes the systick also when timeout is needed + and the backup domain when enabled. + (+) De-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief This function is used to initialize the HAL Library; it must be the first + * instruction to be executed in the main program (before to call any other + * HAL function), it performs the following: + * Configures the SysTick to generate an interrupt each 1 millisecond, + * which is clocked by the HSI (at this stage, the clock is not yet + * configured and thus the system is running from the internal HSI at 16 MHz). + * Set NVIC Group Priority to 4. + * Calls the HAL_MspInit() callback function defined in user file + * "stm32h7xx_hal_msp.c" to do the global low level hardware initialization + * + * @note SysTick is used as time base for the HAL_Delay() function, the application + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + +uint32_t common_system_clock; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + /* Configure Cortex-M4 Instruction cache through ART accelerator */ + __HAL_RCC_ART_CLK_ENABLE(); /* Enable the Cortex-M4 ART Clock */ + __HAL_ART_CONFIG_BASE_ADDRESS(0x08100000UL); /* Configure the Cortex-M4 ART Base address to the Flash Bank 2 : */ + __HAL_ART_ENABLE(); /* Enable the Cortex-M4 ART */ +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Update the SystemCoreClock global variable */ +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE)>> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU); +#endif + + /* Update the SystemD2Clock global variable */ +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)>> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */ + if(HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + return HAL_ERROR; + } + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the systick. + * This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_AHB3_FORCE_RESET(); + __HAL_RCC_AHB3_RELEASE_RESET(); + + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_AHB2_FORCE_RESET(); + __HAL_RCC_AHB2_RELEASE_RESET(); + + __HAL_RCC_AHB4_FORCE_RESET(); + __HAL_RCC_AHB4_RELEASE_RESET(); + + __HAL_RCC_APB3_FORCE_RESET(); + __HAL_RCC_APB3_RELEASE_RESET(); + + __HAL_RCC_APB1L_FORCE_RESET(); + __HAL_RCC_APB1L_RELEASE_RESET(); + + __HAL_RCC_APB1H_FORCE_RESET(); + __HAL_RCC_APB1H_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + __HAL_RCC_APB4_FORCE_RESET(); + __HAL_RCC_APB4_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * the SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /* Check uwTickFreq for MisraC 2012 (even if uwTickFreq is a enum type that don't take the value zero)*/ + if((uint32_t)uwTickFreq == 0UL) + { + return HAL_ERROR; + } + + /* Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(SystemCoreClock / (1000UL / (uint32_t)uwTickFreq)) > 0U) + { + return HAL_ERROR; + } + + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0U); + uwTickPrio = TickPriority; + } + else + { + return HAL_ERROR; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup HAL_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during SLEEP mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in Systick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval Status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + HAL_TickFreqTypeDef prevTickFreq; + + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + + /* Back up uwTickFreq frequency */ + prevTickFreq = uwTickFreq; + + /* Update uwTickFreq global variable used by HAL_InitTick() */ + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + if (status != HAL_OK) + { + /* Restore previous tick frequency */ + uwTickFreq = prevTickFreq; + } + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk; +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32H7xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> 16); +} + +/** + * @brief Returns the device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return(READ_REG(*((uint32_t *)UID_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 4U)))); +} + +/** + * @brief Return the third word of the unique device identifier (UID based on 96 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw2(void) +{ + return(READ_REG(*((uint32_t *)(UID_BASE + 8U)))); +} + +/** + * @brief Configure the internal voltage reference buffer voltage scale. + * @param VoltageScaling specifies the output voltage to achieve + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE0: VREF_OUT1 around 2.5 V. + * This requires VDDA equal to or higher than 2.8 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE1: VREF_OUT2 around 2.048 V. + * This requires VDDA equal to or higher than 2.4 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE2: VREF_OUT3 around 1.8 V. + * This requires VDDA equal to or higher than 2.1 V. + * @arg SYSCFG_VREFBUF_VOLTAGE_SCALE3: VREF_OUT4 around 1.5 V. + * This requires VDDA equal to or higher than 1.8 V. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_VoltageScalingConfig(uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_VOLTAGE_SCALE(VoltageScaling)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, VoltageScaling); +} + +/** + * @brief Configure the internal voltage reference buffer high impedance mode. + * @param Mode specifies the high impedance mode + * This parameter can be one of the following values: + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE: VREF+ pin is internally connect to VREFINT output. + * @arg SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE: VREF+ pin is high impedance. + * @retval None + */ +void HAL_SYSCFG_VREFBUF_HighImpedanceConfig(uint32_t Mode) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE(Mode)); + + MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_HIZ, Mode); +} + +/** + * @brief Tune the Internal Voltage Reference buffer (VREFBUF). + * @retval None + */ +void HAL_SYSCFG_VREFBUF_TrimmingConfig(uint32_t TrimmingValue) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_VREFBUF_TRIMMING(TrimmingValue)); + + MODIFY_REG(VREFBUF->CCR, VREFBUF_CCR_TRIM, TrimmingValue); +} + +/** + * @brief Enable the Internal Voltage Reference buffer (VREFBUF). + * @retval HAL_OK/HAL_TIMEOUT + */ +HAL_StatusTypeDef HAL_SYSCFG_EnableVREFBUF(void) +{ + uint32_t tickstart; + + SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait for VRR bit */ + while(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == 0UL) + { + if((HAL_GetTick() - tickstart) > VREFBUF_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Internal Voltage Reference buffer (VREFBUF). + * + * @retval None + */ +void HAL_SYSCFG_DisableVREFBUF(void) +{ + CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR); +} + +#if defined(SYSCFG_PMCR_EPIS_SEL) +/** + * @brief Ethernet PHY Interface Selection either MII or RMII + * @param SYSCFG_ETHInterface: Selects the Ethernet PHY interface + * This parameter can be one of the following values: + * @arg SYSCFG_ETH_MII : Select the Media Independent Interface + * @arg SYSCFG_ETH_RMII: Select the Reduced Media Independent Interface + * @retval None + */ +void HAL_SYSCFG_ETHInterfaceSelect(uint32_t SYSCFG_ETHInterface) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_ETHERNET_CONFIG(SYSCFG_ETHInterface)); + + MODIFY_REG(SYSCFG->PMCR, SYSCFG_PMCR_EPIS_SEL, (uint32_t)(SYSCFG_ETHInterface)); +} +#endif /* SYSCFG_PMCR_EPIS_SEL */ + +/** + * @brief Analog Switch control for dual analog pads. + * @param SYSCFG_AnalogSwitch: Selects the analog pad + * This parameter can be one or a combination of the following values: + * @arg SYSCFG_SWITCH_PA0 : Select PA0 analog switch + * @arg SYSCFG_SWITCH_PA1: Select PA1 analog switch + * @arg SYSCFG_SWITCH_PC2 : Select PC2 analog switch + * @arg SYSCFG_SWITCH_PC3: Select PC3 analog switch + * @param SYSCFG_SwitchState: Open or Close the analog switch between dual pads (PXn and PXn_C) + * This parameter can be one or a combination of the following values: + * @arg SYSCFG_SWITCH_PA0_OPEN + * @arg SYSCFG_SWITCH_PA0_CLOSE + * @arg SYSCFG_SWITCH_PA1_OPEN + * @arg SYSCFG_SWITCH_PA1_CLOSE + * @arg SYSCFG_SWITCH_PC2_OPEN + * @arg SYSCFG_SWITCH_PC2_CLOSE + * @arg SYSCFG_SWITCH_PC3_OPEN + * @arg SYSCFG_SWITCH_PC3_CLOSE + * @retval None + */ + +void HAL_SYSCFG_AnalogSwitchConfig(uint32_t SYSCFG_AnalogSwitch , uint32_t SYSCFG_SwitchState ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_ANALOG_SWITCH(SYSCFG_AnalogSwitch)); + assert_param(IS_SYSCFG_SWITCH_STATE(SYSCFG_SwitchState)); + + MODIFY_REG(SYSCFG->PMCR, (uint32_t) SYSCFG_AnalogSwitch, (uint32_t)(SYSCFG_SwitchState)); +} + +#if defined(SYSCFG_PMCR_BOOSTEN) +/** + * @brief Enables the booster to reduce the total harmonic distortion of the analog + * switch when the supply voltage is lower than 2.7 V. + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +void HAL_SYSCFG_EnableBOOST(void) +{ + SET_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} + +/** + * @brief Disables the booster + * @note Activating the booster allows to guaranty the analog switch AC performance + * when the supply voltage is below 2.7 V: in this case, the analog switch + * performance is the same on the full voltage range + * @retval None + */ +void HAL_SYSCFG_DisableBOOST(void) +{ + CLEAR_BIT(SYSCFG->PMCR, SYSCFG_PMCR_BOOSTEN) ; +} +#endif /* SYSCFG_PMCR_BOOSTEN */ + +#if defined (SYSCFG_UR2_BOOT_ADD0) || defined (SYSCFG_UR2_BCM7_ADD0) +/** + * @brief BootCM7 address 0 configuration + * @param BootRegister :Specifies the Boot Address register (Address0 or Address1) + * This parameter can be one of the following values: + * @arg SYSCFG_BOOT_ADDR0 : Select the boot address0 + * @arg SYSCFG_BOOT_ADDR1: Select the boot address1 + * @param BootAddress :Specifies the CM7 Boot Address to be loaded in Address0 or Address1 + * @retval None + */ +void HAL_SYSCFG_CM7BootAddConfig(uint32_t BootRegister, uint32_t BootAddress) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_BOOT_REGISTER(BootRegister)); + assert_param(IS_SYSCFG_BOOT_ADDRESS(BootAddress)); + if ( BootRegister == SYSCFG_BOOT_ADDR0 ) + { + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BCM7_ADD0, ((BootAddress >> 16) << SYSCFG_UR2_BCM7_ADD0_Pos)); +#else + MODIFY_REG(SYSCFG->UR2, SYSCFG_UR2_BOOT_ADD0, ((BootAddress >> 16) << SYSCFG_UR2_BOOT_ADD0_Pos)); +#endif /*DUAL_CORE*/ + } + else + { + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM7_ADD1, (BootAddress >> 16)); +#else + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BOOT_ADD1, (BootAddress >> 16)); +#endif /*DUAL_CORE*/ + } +} +#endif /* SYSCFG_UR2_BOOT_ADD0 || SYSCFG_UR2_BCM7_ADD0 */ + +#if defined(DUAL_CORE) +/** + * @brief BootCM4 address 0 configuration + * @param BootRegister :Specifies the Boot Address register (Address0 or Address1) + * This parameter can be one of the following values: + * @arg SYSCFG_BOOT_ADDR0 : Select the boot address0 + * @arg SYSCFG_BOOT_ADDR1: Select the boot address1 + * @param BootAddress :Specifies the CM4 Boot Address to be loaded in Address0 or Address1 + * @retval None + */ +void HAL_SYSCFG_CM4BootAddConfig(uint32_t BootRegister, uint32_t BootAddress) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_BOOT_REGISTER(BootRegister)); + assert_param(IS_SYSCFG_BOOT_ADDRESS(BootAddress)); + + if ( BootRegister == SYSCFG_BOOT_ADDR0 ) + { + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(SYSCFG->UR3, SYSCFG_UR3_BCM4_ADD0, ((BootAddress >> 16)<< SYSCFG_UR3_BCM4_ADD0_Pos)); + } + + else + { + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(SYSCFG->UR4, SYSCFG_UR4_BCM4_ADD1, (BootAddress >> 16)); + } +} + +/** + * @brief Enables the Cortex-M7 boot + * @retval None + */ +void HAL_SYSCFG_EnableCM7BOOT(void) +{ + SET_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM7); +} + +/** + * @brief Disables the Cortex-M7 boot + * @note Disabling the boot will gate the CPU clock + * @retval None + */ +void HAL_SYSCFG_DisableCM7BOOT(void) +{ + CLEAR_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM7) ; +} + +/** + * @brief Enables the Cortex-M4 boot + * @retval None + */ +void HAL_SYSCFG_EnableCM4BOOT(void) +{ + SET_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4); +} + +/** + * @brief Disables the Cortex-M4 boot + * @note Disabling the boot will gate the CPU clock + * @retval None + */ +void HAL_SYSCFG_DisableCM4BOOT(void) +{ + CLEAR_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4); +} +#endif /*DUAL_CORE*/ +/** + * @brief Enables the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +void HAL_EnableCompensationCell(void) +{ + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN) ; +} + +/** + * @brief Power-down the I/O Compensation Cell. + * @note The I/O compensation cell can be used only when the device supply + * voltage ranges from 1.62 to 2.0 V and from 2.7 to 3.6 V. + * @retval None + */ +void HAL_DisableCompensationCell(void) +{ + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_EN); +} + + +/** + * @brief To Enable optimize the I/O speed when the product voltage is low. + * @note This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be + * used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is + * higher than 2.5 V might be destructive. + * @retval None + */ +void HAL_SYSCFG_EnableIOSpeedOptimize(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + SET_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + SET_BIT(SYSCFG->CCCSR, (SYSCFG_CCCSR_HSLV0| SYSCFG_CCCSR_HSLV1 | SYSCFG_CCCSR_HSLV2 | SYSCFG_CCCSR_HSLV3)); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +/** + * @brief To Disable optimize the I/O speed when the product voltage is low. + * @note This bit is active only if PRODUCT_BELOW_25V user option bit is set. It must be + * used only if the product supply voltage is below 2.5 V. Setting this bit when VDD is + * higher than 2.5 V might be destructive. + * @retval None + */ +void HAL_SYSCFG_DisableIOSpeedOptimize(void) +{ +#if defined(SYSCFG_CCCSR_HSLV) + CLEAR_BIT(SYSCFG->CCCSR, SYSCFG_CCCSR_HSLV); +#else + CLEAR_BIT(SYSCFG->CCCSR, (SYSCFG_CCCSR_HSLV0| SYSCFG_CCCSR_HSLV1 | SYSCFG_CCCSR_HSLV2 | SYSCFG_CCCSR_HSLV3)); +#endif /* SYSCFG_CCCSR_HSLV */ +} + +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_CompCode: Selects the code to be applied for the I/O compensation cell + * This parameter can be one of the following values: + * @arg SYSCFG_CELL_CODE : Select Code from the cell (available in the SYSCFG_CCVR) + * @arg SYSCFG_REGISTER_CODE: Select Code from the SYSCFG compensation cell code register (SYSCFG_CCCR) + * @retval None + */ +void HAL_SYSCFG_CompensationCodeSelect(uint32_t SYSCFG_CompCode) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_SELECT(SYSCFG_CompCode)); + MODIFY_REG(SYSCFG->CCCSR, SYSCFG_CCCSR_CS, (uint32_t)(SYSCFG_CompCode)); +} + +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_PMOSCode: PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @param SYSCFG_NMOSCode: NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +void HAL_SYSCFG_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode)); + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode)); + MODIFY_REG(SYSCFG->CCCR, SYSCFG_CCCR_NCC|SYSCFG_CCCR_PCC, (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) ); +} + +#if defined(SYSCFG_CCCR_NCC_MMC) +/** + * @brief Code selection for the I/O Compensation cell + * @param SYSCFG_PMOSCode: VDDMMC PMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @param SYSCFG_NMOSCode: VDDMMC NMOS compensation code + * This code is applied to the I/O compensation cell when the CS bit of the + * SYSCFG_CMPCR is set + * @retval None + */ +void HAL_SYSCFG_VDDMMC_CompensationCodeConfig(uint32_t SYSCFG_PMOSCode, uint32_t SYSCFG_NMOSCode ) +{ + /* Check the parameter */ + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_PMOSCode)); + assert_param(IS_SYSCFG_CODE_CONFIG(SYSCFG_NMOSCode)); + MODIFY_REG(SYSCFG->CCCR, (SYSCFG_CCCR_NCC_MMC | SYSCFG_CCCR_PCC_MMC), (((uint32_t)(SYSCFG_PMOSCode)<< 4)|(uint32_t)(SYSCFG_NMOSCode)) ); +} +#endif /* SYSCFG_CCCR_NCC_MMC */ + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT0) +/** @brief SYSCFG ADC2 internal input alternate connection macros + * @param Adc2AltRout0 This parameter can be a value of : + * @arg @ref SYSCFG_ADC2_ROUT0_DAC1_1 DAC1_out1 connected to ADC2 VINP[16] + * @arg @ref SYSCFG_ADC2_ROUT0_VBAT4 VBAT/4 connected to ADC2 VINP[16] + */ +void HAL_SYSCFG_ADC2ALT_Rout0Config(uint32_t Adc2AltRout0) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_ADC2ALT_ROUT0(Adc2AltRout0)); + + MODIFY_REG(SYSCFG->ADC2ALT, SYSCFG_ADC2ALT_ADC2_ROUT0, Adc2AltRout0); +} +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT0*/ + +#if defined(SYSCFG_ADC2ALT_ADC2_ROUT1) +/** @brief SYSCFG ADC2 internal input alternate connection macros + * @param Adc2AltRout1 This parameter can be a value of : + * @arg @ref SYSCFG_ADC2_ROUT1_DAC1_2 DAC1_out2 connected to ADC2 VINP[17] + * @arg @ref SYSCFG_ADC2_ROUT1_VREFINT VREFINT connected to ADC2 VINP[17] + */ +void HAL_SYSCFG_ADC2ALT_Rout1Config(uint32_t Adc2AltRout1) +{ + /* Check the parameters */ + assert_param(IS_SYSCFG_ADC2ALT_ROUT1(Adc2AltRout1)); + + MODIFY_REG(SYSCFG->ADC2ALT, SYSCFG_ADC2ALT_ADC2_ROUT1, Adc2AltRout1); +} +#endif /*SYSCFG_ADC2ALT_ADC2_ROUT1*/ + +/** + * @brief Enable the Debug Module during Domain1/CDomain SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain SLEEP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD1); +} + + +/** + * @brief Enable the Debug Module during Domain1/CDomain STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD1); +} + +/** + * @brief Enable the Debug Module during Domain1/CDomain STANDBY mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +/** + * @brief Disable the Debug Module during Domain1/CDomain STANDBY mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD1); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable the Debug Module during Domain1 SLEEP mode + * @retval None + */ +void HAL_EnableDomain2DBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Disable the Debug Module during Domain2 SLEEP mode + * @retval None + */ +void HAL_DisableDomain2DBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEPD2); +} + +/** + * @brief Enable the Debug Module during Domain2 STOP mode + * @retval None + */ +void HAL_EnableDomain2DBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Disable the Debug Module during Domain2 STOP mode + * @retval None + */ +void HAL_DisableDomain2DBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD2); +} + +/** + * @brief Enable the Debug Module during Domain2 STANDBY mode + * @retval None + */ +void HAL_EnableDomain2DBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} + +/** + * @brief Disable the Debug Module during Domain2 STANDBY mode + * @retval None + */ +void HAL_DisableDomain2DBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD2); +} +#endif /*DUAL_CORE*/ + +#if defined(DBGMCU_CR_DBG_STOPD3) +/** + * @brief Enable the Debug Module during Domain3/SRDomain STOP mode + * @retval None + */ +void HAL_EnableDomain3DBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} + +/** + * @brief Disable the Debug Module during Domain3/SRDomain STOP mode + * @retval None + */ +void HAL_DisableDomain3DBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOPD3); +} +#endif /*DBGMCU_CR_DBG_STOPD3*/ + +#if defined(DBGMCU_CR_DBG_STANDBYD3) +/** + * @brief Enable the Debug Module during Domain3/SRDomain STANDBY mode + * @retval None + */ +void HAL_EnableDomain3DBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} + +/** + * @brief Disable the Debug Module during Domain3/SRDomain STANDBY mode + * @retval None + */ +void HAL_DisableDomain3DBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBYD3); +} +#endif /*DBGMCU_CR_DBG_STANDBYD3*/ + +/** + * @brief Set the FMC Memory Mapping Swapping config. + * @param BankMapConfig: Defines the FMC Bank mapping configuration. This parameter can be + FMC_SWAPBMAP_DISABLE, FMC_SWAPBMAP_SDRAM_SRAM, FMC_SWAPBMAP_SDRAMB2 + * @retval HAL state + */ +void HAL_SetFMCMemorySwappingConfig(uint32_t BankMapConfig) +{ + /* Check the parameter */ + assert_param(IS_FMC_SWAPBMAP_MODE(BankMapConfig)); + MODIFY_REG(FMC_Bank1_R->BTCR[0], FMC_BCR1_BMAP, BankMapConfig); +} + +/** + * @brief Get FMC Bank mapping mode. + * @retval The FMC Bank mapping mode. This parameter can be + FMC_SWAPBMAP_DISABLE, FMC_SWAPBMAP_SDRAM_SRAM, FMC_SWAPBMAP_SDRAMB2 +*/ +uint32_t HAL_GetFMCMemorySwappingConfig(void) +{ + return READ_BIT(FMC_Bank1_R->BTCR[0], FMC_BCR1_BMAP); +} + +/** + * @brief Configure the EXTI input event line edge + * @note No edge configuration for direct lines but for configurable lines:(EXTI_LINE0..EXTI_LINE21), + * EXTI_LINE49,EXTI_LINE51,EXTI_LINE82,EXTI_LINE84,EXTI_LINE85 and EXTI_LINE86. + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Edge: Specifies EXTI line Edge used. + * This parameter can be one of the following values : + * @arg EXTI_RISING_EDGE : Configurable line, with Rising edge trigger detection + * @arg EXTI_FALLING_EDGE: Configurable line, with Falling edge trigger detection + * @retval None + */ +void HAL_EXTI_EdgeConfig(uint32_t EXTI_Line , uint32_t EXTI_Edge ) +{ + /* Check the parameter */ + assert_param(IS_HAL_EXTI_CONFIG_LINE(EXTI_Line)); + assert_param(IS_EXTI_EDGE_LINE(EXTI_Edge)); + + /* Clear Rising Falling edge configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->FTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI->RTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + + if( (EXTI_Edge & EXTI_RISING_EDGE) == EXTI_RISING_EDGE) + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI->RTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + if( (EXTI_Edge & EXTI_FALLING_EDGE) == EXTI_FALLING_EDGE) + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->FTSR1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } +} + +/** + * @brief Generates a Software interrupt on selected EXTI line. + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0..EXTI_LINE21),EXTI_LINE49,EXTI_LINE51,EXTI_LINE82,EXTI_LINE84,EXTI_LINE85 and EXTI_LINE86. + * @retval None + */ +void HAL_EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_HAL_EXTI_CONFIG_LINE(EXTI_Line)); + + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->SWIER1)) + ((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); +} + + +/** + * @brief Clears the EXTI's line pending flags for Domain D1 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @retval None + */ +void HAL_EXTI_D1_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_D1_LINE(EXTI_Line)); + WRITE_REG(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->PR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + +} + +#if defined(DUAL_CORE) +/** + * @brief Clears the EXTI's line pending flags for Domain D2 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @retval None + */ +void HAL_EXTI_D2_ClearFlag(uint32_t EXTI_Line) +{ + /* Check the parameters */ + assert_param(IS_EXTI_D2_LINE(EXTI_Line)); + WRITE_REG(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->PR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); +} + +#endif /*DUAL_CORE*/ +/** + * @brief Configure the EXTI input event line for Domain D1 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Mode: Specifies which EXTI line is used as interrupt or an event. + * This parameter can be one or a combination of the following values : + * @arg EXTI_MODE_IT : Interrupt Mode selected + * @arg EXTI_MODE_EVT : Event Mode selected + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + + * @retval None + */ +void HAL_EXTI_D1_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd ) +{ + /* Check the parameter */ + assert_param(IS_EXTI_D1_LINE(EXTI_Line)); + assert_param(IS_EXTI_MODE_LINE(EXTI_Mode)); + + if( (EXTI_Mode & EXTI_MODE_IT) == EXTI_MODE_IT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D1->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } + + if( (EXTI_Mode & EXTI_MODE_EVT) == EXTI_MODE_EVT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D1->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + else + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D1->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } +} + +#if defined(DUAL_CORE) +/** + * @brief Configure the EXTI input event line for Domain D2 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0....EXTI_LINE87)excluding :line45, line81,line83 which are reserved + * @param EXTI_Mode: Specifies which EXTI line is used as interrupt or an event. + * This parameter can be one or a combination of the following values : + * @arg EXTI_MODE_IT : Interrupt Mode selected + * @arg EXTI_MODE_EVT : Event Mode selected + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + + * @retval None + */ +void HAL_EXTI_D2_EventInputConfig(uint32_t EXTI_Line , uint32_t EXTI_Mode, uint32_t EXTI_LineCmd ) +{ + /* Check the parameter */ + assert_param(IS_EXTI_D2_LINE(EXTI_Line)); + assert_param(IS_EXTI_MODE_LINE(EXTI_Mode)); + + if( (EXTI_Mode & EXTI_MODE_IT) == EXTI_MODE_IT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI_D2->IMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } + + if( (EXTI_Mode & EXTI_MODE_EVT) == EXTI_MODE_EVT) + { + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D2->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + else + { + SET_BIT( *(__IO uint32_t *) (((uint32_t) &(EXTI_D2->EMR1)) + ((EXTI_Line >> 5 ) * 0x10UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + } +} +#endif /*DUAL_CORE*/ + +/** + * @brief Configure the EXTI input event line for Domain D3 + * @param EXTI_Line: Specifies the EXTI LINE, it can be one of the following values, + * (EXTI_LINE0...EXTI_LINE15),(EXTI_LINE19...EXTI_LINE21),EXTI_LINE25, EXTI_LINE34, + * EXTI_LINE35,EXTI_LINE41,(EXTI_LINE48...EXTI_LINE53) + * @param EXTI_LineCmd controls (Enable/Disable) the EXTI line. + * @param EXTI_ClearSrc: Specifies the clear source of D3 pending event. + * This parameter can be one of the following values : + * @arg BDMA_CH6_CLEAR : BDMA ch6 event selected as D3 domain pendclear source + * @arg BDMA_CH7_CLEAR : BDMA ch7 event selected as D3 domain pendclear source + * @arg LPTIM4_OUT_CLEAR : LPTIM4 out selected as D3 domain pendclear source + * @arg LPTIM5_OUT_CLEAR : LPTIM5 out selected as D3 domain pendclear source + * @retval None + */ +void HAL_EXTI_D3_EventInputConfig(uint32_t EXTI_Line, uint32_t EXTI_LineCmd , uint32_t EXTI_ClearSrc ) +{ + __IO uint32_t *pRegv; + + /* Check the parameter */ + assert_param(IS_EXTI_D3_LINE(EXTI_Line)); + assert_param(IS_EXTI_D3_CLEAR(EXTI_ClearSrc)); + + if( EXTI_LineCmd == 0UL) + { + /* Clear EXTI line configuration */ + CLEAR_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->D3PMR1)) + ((EXTI_Line >> 5 ) * 0x20UL)),(uint32_t)(1UL << (EXTI_Line & 0x1FUL)) ); + } + else + { + SET_BIT(*(__IO uint32_t *) (((uint32_t) &(EXTI->D3PMR1)) +((EXTI_Line >> 5 ) * 0x20UL)), (uint32_t)(1UL << (EXTI_Line & 0x1FUL))); + } + + if(((EXTI_Line>>4)%2UL) == 0UL) + { + pRegv = (__IO uint32_t *) (((uint32_t) &(EXTI->D3PCR1L)) + ((EXTI_Line >> 5 ) * 0x20UL)); + } + else + { + pRegv = (__IO uint32_t *) (((uint32_t) &(EXTI->D3PCR1H)) + ((EXTI_Line >> 5 ) * 0x20UL)); + } + MODIFY_REG(*pRegv, (uint32_t)(3UL << ((EXTI_Line*2UL) & 0x1FUL)), (uint32_t)(EXTI_ClearSrc << ((EXTI_Line*2UL) & 0x1FUL))); + +} + + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c new file mode 100644 index 0000000..05730c1 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c @@ -0,0 +1,531 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex-M exceptions are managed by CMSIS functions. + + (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() + function according to the following table. + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ(). + (#) please refer to programming manual for details in how to configure priority. + + -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. + The pending IRQ priority will be managed only by the sub priority. + + -@- IRQ priority order (sorted by highest to lowest priority): + (+@) Lowest preemption priority + (+@) Lowest sub priority + (+@) Lowest hardware priority (IRQ number) + + [..] + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x0F). + (++) Resets the SysTick Counter register. + (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro + HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the + HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined + inside the stm32h7xx_hal_cortex.h file. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + Systick functionalities + +@endverbatim + * @{ + */ + + +/** + * @brief Sets the priority grouping field (preemption priority and subpriority) + * using the required unlock sequence. + * @param PriorityGroup The priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. + * The pending IRQ priority will be managed only by the subpriority. + * @retval None + */ +void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ + NVIC_SetPriorityGrouping(PriorityGroup); +} + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * This parameter can be a value between 0 and 15 + * A lower priority value indicates a higher priority. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t prioritygroup; + + /* Check the parameters */ + assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + + prioritygroup = NVIC_GetPriorityGrouping(); + + NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); +} + +/** + * @brief Enables a device specific interrupt in the NVIC interrupt controller. + * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() + * function should be called before. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disables a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiates a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ +#if (__MPU_PRESENT == 1) +/** + * @brief Disables the MPU + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable fault exceptions */ + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0; +} + +/** + * @brief Enables the MPU + * @param MPU_Control Specifies the control mode of the MPU during hard fault, + * NMI, FAULTMASK and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; + + /* Enable fault exceptions */ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} +/** + * @brief Initializes and configures the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != 0UL) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00; + MPU->RASR = 0x00; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @brief Gets the priority grouping field from the NVIC Interrupt Controller. + * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) + */ +uint32_t HAL_NVIC_GetPriorityGrouping(void) +{ + /* Get the PRIGROUP[10:8] field value */ + return NVIC_GetPriorityGrouping(); +} + +/** + * @brief Gets the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @param PriorityGroup the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority + * 4 bits for subpriority + * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority + * 3 bits for subpriority + * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority + * 2 bits for subpriority + * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority + * 1 bits for subpriority + * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority + * 0 bits for subpriority + * @param pPreemptPriority Pointer on the Preemptive priority value (starting from 0). + * @param pSubPriority Pointer on the Subpriority value (starting from 0). + * @retval None + */ +void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); + /* Get priority for Cortex-M system or device specific interrupts */ + NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); +} + +/** + * @brief Sets Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Gets Pending Interrupt (reads the pending register in the NVIC + * and returns the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval status - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clears the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + +/** + * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32h7xxxx.h)) + * @retval status - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if active else 0 */ + return NVIC_GetActive(IRQn); +} + +/** + * @brief Configures the SysTick clock source. + * @param CLKSource specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); + if (CLKSource == SYSTICK_CLKSOURCE_HCLK) + { + SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; + } + else + { + SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; + } +} + +/** + * @brief This function handles SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if defined(DUAL_CORE) + +/** + * @brief Returns the current CPU ID. + * @retval CPU identifier + */ +uint32_t HAL_GetCurrentCPUID(void) +{ + if (((SCB->CPUID & 0x000000F0U) >> 4 )== 0x7U) + { + return CM7_CPUID; + } + else + { + return CM4_CPUID; + } +} + +#else + +/** +* @brief Returns the current CPU ID. +* @retval CPU identifier +*/ +uint32_t HAL_GetCurrentCPUID(void) +{ + return CM7_CPUID; +} + +#endif /*DUAL_CORE*/ +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c new file mode 100644 index 0000000..dada223 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c @@ -0,0 +1,2062 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Stream + (except for internal SRAM/FLASH memories: no initialization is + necessary) please refer to Reference manual for connection between peripherals + and DMA requests . + + (#) For a given Stream, program the required configuration through the following parameters: + Transfer Direction, Source and Destination data formats, + Circular, Normal or peripheral flow control mode, Stream Priority level, + Source and Destination Increment mode, FIFO mode and its Threshold (if needed), + Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. In this + case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of DMA handle structure). + [..] + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is + possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set + Half-Word data size for the peripheral to access its data register and set Word data size + for the Memory to gain in access time. Each two half words will be packed and written in + a single access to a Word in the Memory). + + -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source + and Destination. In this case the Peripheral Data Size will be applied to both Source + and Destination. + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream. + (+) __HAL_DMA_GET_FS: Return the current DMA Stream FIFO filled level. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/** @addtogroup DMA_Private_Types + * @{ + */ +typedef struct +{ + __IO uint32_t ISR; /*!< DMA interrupt status register */ + __IO uint32_t Reserved0; + __IO uint32_t IFCR; /*!< DMA interrupt flag clear register */ +} DMA_Base_Registers; + +typedef struct +{ + __IO uint32_t ISR; /*!< BDMA interrupt status register */ + __IO uint32_t IFCR; /*!< BDMA interrupt flag clear register */ +} BDMA_Base_Registers; +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DMA_Private_Constants + * @{ + */ +#define HAL_TIMEOUT_DMA_ABORT (5U) /* 5 ms */ + +#define BDMA_PERIPH_TO_MEMORY (0x00000000U) /*!< Peripheral to memory direction */ +#define BDMA_MEMORY_TO_PERIPH ((uint32_t)BDMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define BDMA_MEMORY_TO_MEMORY ((uint32_t)BDMA_CCR_MEM2MEM) /*!< Memory to memory direction */ + +/* DMA to BDMA conversion */ +#define DMA_TO_BDMA_DIRECTION(__DMA_DIRECTION__) (((__DMA_DIRECTION__) == DMA_MEMORY_TO_PERIPH)? BDMA_MEMORY_TO_PERIPH: \ + ((__DMA_DIRECTION__) == DMA_MEMORY_TO_MEMORY)? BDMA_MEMORY_TO_MEMORY: \ + BDMA_PERIPH_TO_MEMORY) + +#define DMA_TO_BDMA_PERIPHERAL_INC(__DMA_PERIPHERAL_INC__) ((__DMA_PERIPHERAL_INC__) >> 3U) +#define DMA_TO_BDMA_MEMORY_INC(__DMA_MEMORY_INC__) ((__DMA_MEMORY_INC__) >> 3U) + +#define DMA_TO_BDMA_PDATA_SIZE(__DMA_PDATA_SIZE__) ((__DMA_PDATA_SIZE__) >> 3U) +#define DMA_TO_BDMA_MDATA_SIZE(__DMA_MDATA_SIZE__) ((__DMA_MDATA_SIZE__) >> 3U) + +#define DMA_TO_BDMA_MODE(__DMA_MODE__) ((__DMA_MODE__) >> 3U) + +#define DMA_TO_BDMA_PRIORITY(__DMA_PRIORITY__) ((__DMA_PRIORITY__) >> 4U) + +#if defined(UART9) +#define IS_DMA_UART_USART_REQUEST(__REQUEST__) ((((__REQUEST__) >= DMA_REQUEST_USART1_RX) && ((__REQUEST__) <= DMA_REQUEST_USART3_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART4_RX) && ((__REQUEST__) <= DMA_REQUEST_UART5_TX )) || \ + (((__REQUEST__) >= DMA_REQUEST_USART6_RX) && ((__REQUEST__) <= DMA_REQUEST_USART6_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART7_RX) && ((__REQUEST__) <= DMA_REQUEST_UART8_TX )) || \ + (((__REQUEST__) >= DMA_REQUEST_UART9_RX) && ((__REQUEST__) <= DMA_REQUEST_USART10_TX ))) +#else +#define IS_DMA_UART_USART_REQUEST(__REQUEST__) ((((__REQUEST__) >= DMA_REQUEST_USART1_RX) && ((__REQUEST__) <= DMA_REQUEST_USART3_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART4_RX) && ((__REQUEST__) <= DMA_REQUEST_UART5_TX )) || \ + (((__REQUEST__) >= DMA_REQUEST_USART6_RX) && ((__REQUEST__) <= DMA_REQUEST_USART6_TX)) || \ + (((__REQUEST__) >= DMA_REQUEST_UART7_RX) && ((__REQUEST__) <= DMA_REQUEST_UART8_TX ))) + +#endif +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DMA_Private_Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma); +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Stream source + and destination incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Stream priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + The HAL_DMA_DeInit function allows to deinitialize the DMA stream. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and create the associated handle. + * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t registerValue; + uint32_t tickstart = HAL_GetTick(); + DMA_Base_Registers *regs_dma; + BDMA_Base_Registers *regs_bdma; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + assert_param(IS_DMA_REQUEST(hdma->Init.Request)); + assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode)); + /* Check the memory burst, peripheral burst and FIFO threshold parameters only + when FIFO mode is enabled */ + if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE) + { + assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold)); + assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst)); + assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst)); + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA Stream is effectively disabled */ + while((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_EN) != 0U) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Get the CR register value */ + registerValue = ((DMA_Stream_TypeDef *)hdma->Instance)->CR; + + /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */ + registerValue &= ((uint32_t)~(DMA_SxCR_MBURST | DMA_SxCR_PBURST | \ + DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \ + DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \ + DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM)); + + /* Prepare the DMA Stream configuration */ + registerValue |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* the Memory burst and peripheral burst are not used when the FIFO is disabled */ + if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) + { + /* Get memory burst and peripheral burst */ + registerValue |= hdma->Init.MemBurst | hdma->Init.PeriphBurst; + } + + /* Work around for Errata 2.22: UART/USART- DMA transfer lock: DMA stream could be + lock when transferring data to/from USART/UART */ +#if (STM32H7_DEV_ID == 0x450UL) + if((DBGMCU->IDCODE & 0xFFFF0000U) >= 0x20000000U) + { +#endif /* STM32H7_DEV_ID == 0x450UL */ + if(IS_DMA_UART_USART_REQUEST(hdma->Init.Request) != 0U) + { + registerValue |= DMA_SxCR_TRBUFF; + } +#if (STM32H7_DEV_ID == 0x450UL) + } +#endif /* STM32H7_DEV_ID == 0x450UL */ + + /* Write to DMA Stream CR register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR = registerValue; + + /* Get the FCR register value */ + registerValue = ((DMA_Stream_TypeDef *)hdma->Instance)->FCR; + + /* Clear Direct mode and FIFO threshold bits */ + registerValue &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH); + + /* Prepare the DMA Stream FIFO configuration */ + registerValue |= hdma->Init.FIFOMode; + + /* the FIFO threshold is not used when the FIFO mode is disabled */ + if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE) + { + /* Get the FIFO threshold */ + registerValue |= hdma->Init.FIFOThreshold; + + /* Check compatibility between FIFO threshold level and size of the memory burst */ + /* for INCR4, INCR8, INCR16 */ + if(hdma->Init.MemBurst != DMA_MBURST_SINGLE) + { + if (DMA_CheckFifoParam(hdma) != HAL_OK) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_ERROR; + } + } + } + + /* Write to DMA Stream FCR */ + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR = registerValue; + + /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate + DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + regs_dma = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + if(IS_BDMA_CHANNEL_DMAMUX_INSTANCE(hdma->Instance) != 0U) + { + /* Check the request parameter */ + assert_param(IS_BDMA_REQUEST(hdma->Init.Request)); + } + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Allocate lock resource */ + __HAL_UNLOCK(hdma); + + /* Get the CR register value */ + registerValue = ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, MEM2MEM, DBM and CT bits */ + registerValue &= ((uint32_t)~(BDMA_CCR_PL | BDMA_CCR_MSIZE | BDMA_CCR_PSIZE | \ + BDMA_CCR_MINC | BDMA_CCR_PINC | BDMA_CCR_CIRC | \ + BDMA_CCR_DIR | BDMA_CCR_MEM2MEM | BDMA_CCR_DBM | \ + BDMA_CCR_CT)); + + /* Prepare the DMA Channel configuration */ + registerValue |= DMA_TO_BDMA_DIRECTION(hdma->Init.Direction) | + DMA_TO_BDMA_PERIPHERAL_INC(hdma->Init.PeriphInc) | + DMA_TO_BDMA_MEMORY_INC(hdma->Init.MemInc) | + DMA_TO_BDMA_PDATA_SIZE(hdma->Init.PeriphDataAlignment) | + DMA_TO_BDMA_MDATA_SIZE(hdma->Init.MemDataAlignment) | + DMA_TO_BDMA_MODE(hdma->Init.Mode) | + DMA_TO_BDMA_PRIORITY(hdma->Init.Priority); + + /* Write to DMA Channel CR register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR = registerValue; + + /* calculation of the channel index */ + hdma->StreamIndex = (((uint32_t)((uint32_t*)hdma->Instance) - (uint32_t)BDMA_Channel0) / ((uint32_t)BDMA_Channel1 - (uint32_t)BDMA_Channel0)) << 2U; + + /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate + DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */ + regs_bdma = (BDMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags */ + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + } + else + { + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + hdma->State = HAL_DMA_STATE_ERROR; + + return HAL_ERROR; + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask + */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Initialize parameters for DMAMUX request generator : + if the DMA request is DMA_REQUEST_GENERATOR0 to DMA_REQUEST_GENERATOR7 + */ + if((hdma->Init.Request >= DMA_REQUEST_GENERATOR0) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR7)) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register */ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + else + { + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + } + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the DMA peripheral + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + DMA_Base_Registers *regs_dma; + BDMA_Base_Registers *regs_bdma; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Disable the selected DMA Streamx */ + __HAL_DMA_DISABLE(hdma); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Reset DMA Streamx control register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR = 0U; + + /* Reset DMA Streamx number of data to transfer register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = 0U; + + /* Reset DMA Streamx peripheral address register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = 0U; + + /* Reset DMA Streamx memory 0 address register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = 0U; + + /* Reset DMA Streamx memory 1 address register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = 0U; + + /* Reset DMA Streamx FIFO control register */ + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR = (uint32_t)0x00000021U; + + /* Get DMA steam Base Address */ + regs_dma = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags at correct offset within the register */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + /* Reset DMA Channel control register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR = 0U; + + /* Reset DMA Channel Number of Data to Transfer register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = 0U; + + /* Reset DMA Channel peripheral address register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = 0U; + + /* Reset DMA Channel memory 0 address register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = 0U; + + /* Reset DMA Channel memory 1 address register */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = 0U; + + /* Get DMA steam Base Address */ + regs_bdma = (BDMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma); + + /* Clear all interrupt flags at correct offset within the register */ + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + } + else + { + /* Return error status */ + return HAL_ERROR; + } + +#if defined (BDMA1) /* No DMAMUX available for BDMA1 available on STM32H7Ax/Bx devices only */ + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ +#endif /* BDMA1 */ + { + /* Initialize parameters for DMAMUX channel : + DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */ + DMA_CalcDMAMUXChannelBaseAndMask(hdma); + + if(hdma->DMAmuxChannel != 0U) + { + /* Resett he DMAMUX channel that corresponds to the DMA stream */ + hdma->DMAmuxChannel->CCR = 0U; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + } + + if((hdma->Init.Request >= DMA_REQUEST_GENERATOR0) && (hdma->Init.Request <= DMA_REQUEST_GENERATOR7)) + { + /* Initialize parameters for DMAMUX request generator : + DMAmuxRequestGen, DMAmuxRequestGenStatus and DMAmuxRequestGenStatusMask */ + DMA_CalcDMAMUXRequestGenBaseAndMask(hdma); + + /* Reset the DMAMUX request generator register */ + hdma->DMAmuxRequestGen->RGCR = 0U; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + + hdma->DMAmuxRequestGen = 0U; + hdma->DMAmuxRequestGenStatus = 0U; + hdma->DMAmuxRequestGenStatusMask = 0U; + } + + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferM1CpltCallback = NULL; + hdma->XferM1HalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Register and Unregister DMA callbacks + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Starts the DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length */ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable Common interrupts*/ + MODIFY_REG(((DMA_Stream_TypeDef *)hdma->Instance)->CR, (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT), (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME)); + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Enable Half Transfer IT if corresponding Callback is set */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_IT_HT; + } + } + else /* BDMA channel */ + { + /* Enable Common interrupts */ + MODIFY_REG(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR, (BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE), (BDMA_CCR_TCIE | BDMA_CCR_TEIE)); + + if(hdma->XferHalfCpltCallback != NULL) + { + /*Enable Half Transfer IT if corresponding Callback is set */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= BDMA_CCR_HTIE; + } + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Check if DMAMUX Synchronization is enabled */ + if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT */ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Aborts the DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * + * @note After disabling a DMA Stream, a check for wait until the DMA Stream is + * effectively disabled is added. If a Stream is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Stream will be effectively disabled only after the transfer of + * this single data is finished. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs_dma; + BDMA_Base_Registers *regs_bdma; + const __IO uint32_t *enableRegister; + + uint32_t tickstart = HAL_GetTick(); + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if(hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable all the transfer interrupts */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Disable DMA All Interrupts */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT); + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR &= ~(DMA_IT_FE); + + enableRegister = (__IO uint32_t *)(&(((DMA_Stream_TypeDef *)hdma->Instance)->CR)); + } + else /* BDMA channel */ + { + /* Disable DMA All Interrupts */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR &= ~(BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE); + + enableRegister = (__IO uint32_t *)(&(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR)); + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* disable the DMAMUX sync overrun IT */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + } + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + + /* Check if the DMA Stream is effectively disabled */ + while(((*enableRegister) & DMA_SxCR_EN) != 0U) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Clear all interrupt flags at correct offset within the register */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + regs_dma = (DMA_Base_Registers *)hdma->StreamBaseAddress; + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA channel */ + { + regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT */ + /* disable the request gen overrun IT */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + BDMA_Base_Registers *regs_bdma; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + if(hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + return HAL_ERROR; + } + else + { + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Set Abort State */ + hdma->State = HAL_DMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + } + else /* BDMA channel */ + { + /* Disable DMA All Interrupts */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR &= ~(BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* disable the DMAMUX sync overrun IT */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear all flags */ + regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + regs_bdma->IFCR = ((BDMA_IFCR_CGIF0) << (hdma->StreamIndex & 0x1FU)); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, disable the DMAMUX request generator overrun IT*/ + /* disable the request gen overrun IT */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + } + + return HAL_OK; +} + +/** + * @brief Polling for transfer complete. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CompleteLevel: Specifies the DMA level complete. + * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead. + * This model could be used for debug purpose. + * @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode). + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t cpltlevel_mask; + uint32_t tickstart = HAL_GetTick(); + + /* IT status register */ + __IO uint32_t *isr_reg; + /* IT clear flag register */ + __IO uint32_t *ifcr_reg; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_DMA_STATE_BUSY != hdma->State) + { + /* No transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Polling mode not supported in circular mode and double buffering mode */ + if ((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + cpltlevel_mask = DMA_FLAG_TCIF0_4 << (hdma->StreamIndex & 0x1FU); + } + else + { + /* Half Transfer Complete flag */ + cpltlevel_mask = DMA_FLAG_HTIF0_4 << (hdma->StreamIndex & 0x1FU); + } + + isr_reg = &(((DMA_Base_Registers *)hdma->StreamBaseAddress)->ISR); + ifcr_reg = &(((DMA_Base_Registers *)hdma->StreamBaseAddress)->IFCR); + } + else /* BDMA channel */ + { + /* Polling mode not supported in circular mode */ + if ((((BDMA_Channel_TypeDef *)hdma->Instance)->CCR & BDMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Transfer Complete flag */ + cpltlevel_mask = BDMA_FLAG_TC0 << (hdma->StreamIndex & 0x1FU); + } + else + { + /* Half Transfer Complete flag */ + cpltlevel_mask = BDMA_FLAG_HT0 << (hdma->StreamIndex & 0x1FU); + } + + isr_reg = &(((BDMA_Base_Registers *)hdma->StreamBaseAddress)->ISR); + ifcr_reg = &(((BDMA_Base_Registers *)hdma->StreamBaseAddress)->IFCR); + } + + while(((*isr_reg) & cpltlevel_mask) == 0U) + { + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + if(((*isr_reg) & (DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_FE; + + /* Clear the FIFO error flag */ + (*ifcr_reg) = DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU); + } + + if(((*isr_reg) & (DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DME; + + /* Clear the Direct Mode error flag */ + (*ifcr_reg) = DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU); + } + + if(((*isr_reg) & (DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TE; + + /* Clear the transfer error flag */ + (*ifcr_reg) = DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + else /* BDMA channel */ + { + if(((*isr_reg) & (BDMA_FLAG_TE0 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + (*isr_reg) = ((BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + + /* Check for the Timeout (Not applicable in circular mode)*/ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout)||(Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* if timeout then abort the current transfer */ + /* No need to check return value: as in this case we will return HAL_ERROR with HAL_DMA_ERROR_TIMEOUT error code */ + (void) HAL_DMA_Abort(hdma); + /* + Note that the Abort function will + - Clear the transfer error flags + - Unlock + - Set the State + */ + + return HAL_ERROR; + } + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Check for DMAMUX Request generator (if used) overrun status */ + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator Check for DMAMUX request generator overrun */ + if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + } + } + + /* Check for DMAMUX Synchronization overrun */ + if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + } + } + } + + + /* Get the level transfer complete flag */ + if(CompleteLevel == HAL_DMA_FULL_TRANSFER) + { + /* Clear the half transfer and transfer complete flags */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + (*ifcr_reg) = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA channel */ + { + (*ifcr_reg) = (BDMA_FLAG_TC0 << (hdma->StreamIndex & 0x1FU)); + } + + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + else /*CompleteLevel = HAL_DMA_HALF_TRANSFER*/ + { + /* Clear the half transfer and transfer complete flags */ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + (*ifcr_reg) = (DMA_FLAG_HTIF0_4) << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA channel */ + { + (*ifcr_reg) = (BDMA_FLAG_HT0 << (hdma->StreamIndex & 0x1FU)); + } + } + + return status; +} + +/** + * @brief Handles DMA interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t tmpisr_dma, tmpisr_bdma; + uint32_t ccr_reg; + __IO uint32_t count = 0U; + uint32_t timeout = SystemCoreClock / 9600U; + + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs_dma = (DMA_Base_Registers *)hdma->StreamBaseAddress; + BDMA_Base_Registers *regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + + tmpisr_dma = regs_dma->ISR; + tmpisr_bdma = regs_bdma->ISR; + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Transfer Error Interrupt management ***************************************/ + if ((tmpisr_dma & (DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != 0U) + { + /* Disable the transfer error interrupt */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TE); + + /* Clear the transfer error flag */ + regs_dma->IFCR = DMA_FLAG_TEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_TE; + } + } + /* FIFO Error Interrupt management ******************************************/ + if ((tmpisr_dma & (DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != 0U) + { + /* Clear the FIFO error flag */ + regs_dma->IFCR = DMA_FLAG_FEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_FE; + } + } + /* Direct Mode Error Interrupt management ***********************************/ + if ((tmpisr_dma & (DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != 0U) + { + /* Clear the direct mode error flag */ + regs_dma->IFCR = DMA_FLAG_DMEIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_DME; + } + } + /* Half Transfer Complete Interrupt management ******************************/ + if ((tmpisr_dma & (DMA_FLAG_HTIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != 0U) + { + /* Clear the half transfer complete flag */ + regs_dma->IFCR = DMA_FLAG_HTIF0_4 << (hdma->StreamIndex & 0x1FU); + + /* Multi_Buffering mode enabled */ + if(((((DMA_Stream_TypeDef *)hdma->Instance)->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CT) == 0U) + { + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferM1HalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferM1HalfCpltCallback(hdma); + } + } + } + else + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_HT); + } + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + } + /* Transfer Complete Interrupt management ***********************************/ + if ((tmpisr_dma & (DMA_FLAG_TCIF0_4 << (hdma->StreamIndex & 0x1FU))) != 0U) + { + if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != 0U) + { + /* Clear the transfer complete flag */ + regs_dma->IFCR = DMA_FLAG_TCIF0_4 << (hdma->StreamIndex & 0x1FU); + + if(HAL_DMA_STATE_ABORT == hdma->State) + { + /* Disable all the transfer interrupts */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME); + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR &= ~(DMA_IT_FE); + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_HT); + } + + /* Clear all interrupt flags at correct offset within the register */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if(hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + return; + } + + if(((((DMA_Stream_TypeDef *)hdma->Instance)->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CT) == 0U) + { + if(hdma->XferM1CpltCallback != NULL) + { + /* Transfer complete Callback for memory1 */ + hdma->XferM1CpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete Callback for memory0 */ + hdma->XferCpltCallback(hdma); + } + } + } + /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */ + else + { + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_CIRC) == 0U) + { + /* Disable the transfer complete interrupt */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= ~(DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + } + } + + /* manage error case */ + if(hdma->ErrorCode != HAL_DMA_ERROR_NONE) + { + if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != 0U) + { + hdma->State = HAL_DMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_DMA_DISABLE(hdma); + + do + { + if (++count > timeout) + { + break; + } + } + while((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_EN) != 0U); + + if((((DMA_Stream_TypeDef *)hdma->Instance)->CR & DMA_SxCR_EN) != 0U) + { + /* Change the DMA state to error if DMA disable fails */ + hdma->State = HAL_DMA_STATE_ERROR; + } + else + { + /* Change the DMA state to Ready if DMA disable success */ + hdma->State = HAL_DMA_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + ccr_reg = (((BDMA_Channel_TypeDef *)hdma->Instance)->CCR); + + /* Half Transfer Complete Interrupt management ******************************/ + if (((tmpisr_bdma & (BDMA_FLAG_HT0 << (hdma->StreamIndex & 0x1FU))) != 0U) && ((ccr_reg & BDMA_CCR_HTIE) != 0U)) + { + /* Clear the half transfer complete flag */ + regs_bdma->IFCR = (BDMA_ISR_HTIF0 << (hdma->StreamIndex & 0x1FU)); + + /* Disable the transfer complete interrupt if the DMA mode is Double Buffering */ + if((ccr_reg & BDMA_CCR_DBM) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((ccr_reg & BDMA_CCR_CT) == 0U) + { + if(hdma->XferM1HalfCpltCallback != NULL) + { + /* Half transfer Callback for Memory 1 */ + hdma->XferM1HalfCpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer Callback for Memory 0 */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + else + { + if((ccr_reg & BDMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if(hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if (((tmpisr_bdma & (BDMA_FLAG_TC0 << (hdma->StreamIndex & 0x1FU))) != 0U) && ((ccr_reg & BDMA_CCR_TCIE) != 0U)) + { + /* Clear the transfer complete flag */ + regs_bdma->IFCR = (BDMA_ISR_TCIF0) << (hdma->StreamIndex & 0x1FU); + + /* Disable the transfer complete interrupt if the DMA mode is Double Buffering */ + if((ccr_reg & BDMA_CCR_DBM) != 0U) + { + /* Current memory buffer used is Memory 0 */ + if((ccr_reg & BDMA_CCR_CT) == 0U) + { + if(hdma->XferM1CpltCallback != NULL) + { + /* Transfer complete Callback for Memory 1 */ + hdma->XferM1CpltCallback(hdma); + } + } + /* Current memory buffer used is Memory 1 */ + else + { + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete Callback for Memory 0 */ + hdma->XferCpltCallback(hdma); + } + } + } + else + { + if((ccr_reg & BDMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt, if the DMA mode is not CIRCULAR */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + if(hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + } + /* Transfer Error Interrupt management **************************************/ + else if (((tmpisr_bdma & (BDMA_FLAG_TE0 << (hdma->StreamIndex & 0x1FU))) != 0U) && ((ccr_reg & BDMA_CCR_TEIE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + regs_bdma->IFCR = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + } + else + { + /* Nothing To Do */ + } +} + +/** + * @brief Register callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID: User Callback identifier + * a DMA_HandleTypeDef structure as parameter. + * @param pCallback: pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_M1CPLT_CB_ID: + hdma->XferM1CpltCallback = pCallback; + break; + + case HAL_DMA_XFER_M1HALFCPLT_CB_ID: + hdma->XferM1HalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param CallbackID: User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DMA peripheral handle */ + if(hdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_M1CPLT_CB_ID: + hdma->XferM1CpltCallback = NULL; + break; + + case HAL_DMA_XFER_M1HALFCPLT_CB_ID: + hdma->XferM1HalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferM1CpltCallback = NULL; + hdma->XferM1HalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the DMA state. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + return hdma->State; +} + +/** + * @brief Return the DMA error code + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval None + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* calculate DMA base and stream number */ + DMA_Base_Registers *regs_dma = (DMA_Base_Registers *)hdma->StreamBaseAddress; + BDMA_Base_Registers *regs_bdma = (BDMA_Base_Registers *)hdma->StreamBaseAddress; + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Clear all interrupt flags at correct offset within the register */ + regs_dma->IFCR = 0x3FUL << (hdma->StreamIndex & 0x1FU); + + /* Clear DBM bit */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR &= (uint32_t)(~DMA_SxCR_DBM); + + /* Configure DMA Stream data length */ + ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = DstAddress; + + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = SrcAddress; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = DstAddress; + } + } + else if(IS_BDMA_CHANNEL_INSTANCE(hdma->Instance) != 0U) /* BDMA instance(s) */ + { + /* Clear all flags */ + regs_bdma->IFCR = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + + /* Configure DMA Channel data length */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Channel source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = DstAddress; + } + } + else + { + /* Nothing To Do */ + } +} + +/** + * @brief Returns the DMA Stream base address depending on stream number + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval Stream base address + */ +static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma) +{ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + uint32_t stream_number = (((uint32_t)((uint32_t*)hdma->Instance) & 0xFFU) - 16U) / 24U; + + /* lookup table for necessary bitshift of flags within status registers */ + static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U}; + hdma->StreamIndex = flagBitshiftOffset[stream_number & 0x7U]; + + if (stream_number > 3U) + { + /* return pointer to HISR and HIFCR */ + hdma->StreamBaseAddress = (((uint32_t)((uint32_t*)hdma->Instance) & (uint32_t)(~0x3FFU)) + 4U); + } + else + { + /* return pointer to LISR and LIFCR */ + hdma->StreamBaseAddress = ((uint32_t)((uint32_t*)hdma->Instance) & (uint32_t)(~0x3FFU)); + } + } + else /* BDMA instance(s) */ + { + /* return pointer to ISR and IFCR */ + hdma->StreamBaseAddress = ((uint32_t)((uint32_t*)hdma->Instance) & (uint32_t)(~0xFFU)); + } + + return hdma->StreamBaseAddress; +} + +/** + * @brief Check compatibility between FIFO threshold level and size of the memory burst + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Memory Data size equal to Byte */ + if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE) + { + switch (hdma->Init.FIFOThreshold) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + + case DMA_FIFO_THRESHOLD_HALFFULL: + if (hdma->Init.MemBurst == DMA_MBURST_INC16) + { + status = HAL_ERROR; + } + break; + + case DMA_FIFO_THRESHOLD_FULL: + break; + + default: + break; + } + } + + /* Memory Data size equal to Half-Word */ + else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + switch (hdma->Init.FIFOThreshold) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + status = HAL_ERROR; + break; + + case DMA_FIFO_THRESHOLD_HALFFULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + + case DMA_FIFO_THRESHOLD_FULL: + if (hdma->Init.MemBurst == DMA_MBURST_INC16) + { + status = HAL_ERROR; + } + break; + + default: + break; + } + } + + /* Memory Data size equal to Word */ + else + { + switch (hdma->Init.FIFOThreshold) + { + case DMA_FIFO_THRESHOLD_1QUARTERFULL: + case DMA_FIFO_THRESHOLD_HALFFULL: + case DMA_FIFO_THRESHOLD_3QUARTERSFULL: + status = HAL_ERROR; + break; + + case DMA_FIFO_THRESHOLD_FULL: + if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1) + { + status = HAL_ERROR; + } + break; + + default: + break; + } + } + + return status; +} + +/** + * @brief Updates the DMA handle with the DMAMUX channel and status mask depending on stream number + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static void DMA_CalcDMAMUXChannelBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t stream_number; + uint32_t stream_baseaddress = (uint32_t)((uint32_t*)hdma->Instance); + + if(IS_BDMA_CHANNEL_DMAMUX_INSTANCE(hdma->Instance) != 0U) + { + /* BDMA Channels are connected to DMAMUX2 channels */ + stream_number = (((uint32_t)((uint32_t*)hdma->Instance) & 0xFFU) - 8U) / 20U; + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)((uint32_t)(((uint32_t)DMAMUX2_Channel0) + (stream_number * 4U))); + hdma->DMAmuxChannelStatus = DMAMUX2_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (stream_number & 0x1FU); + } + else + { + /* DMA1/DMA2 Streams are connected to DMAMUX1 channels */ + stream_number = (((uint32_t)((uint32_t*)hdma->Instance) & 0xFFU) - 16U) / 24U; + + if((stream_baseaddress <= ((uint32_t)DMA2_Stream7) ) && \ + (stream_baseaddress >= ((uint32_t)DMA2_Stream0))) + { + stream_number += 8U; + } + hdma->DMAmuxChannel = (DMAMUX_Channel_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_Channel0) + (stream_number * 4U))); + hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus; + hdma->DMAmuxChannelStatusMask = 1UL << (stream_number & 0x1FU); + } +} + +/** + * @brief Updates the DMA handle with the DMAMUX request generator params + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +static void DMA_CalcDMAMUXRequestGenBaseAndMask(DMA_HandleTypeDef *hdma) +{ + uint32_t request = hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID; + + if((request >= DMA_REQUEST_GENERATOR0) && (request <= DMA_REQUEST_GENERATOR7)) + { + if(IS_BDMA_CHANNEL_DMAMUX_INSTANCE(hdma->Instance) != 0U) + { + /* BDMA Channels are connected to DMAMUX2 request generator blocks */ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX2_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX2_RequestGenStatus; + } + else + { + /* DMA1 and DMA2 Streams use DMAMUX1 request generator blocks */ + hdma->DMAmuxRequestGen = (DMAMUX_RequestGen_TypeDef *)((uint32_t)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1U) * 4U))); + + hdma->DMAmuxRequestGenStatus = DMAMUX1_RequestGenStatus; + } + + hdma->DMAmuxRequestGenStatusMask = 1UL << (request - 1U); + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c new file mode 100644 index 0000000..a134b4e --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c @@ -0,0 +1,712 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_dma_ex.c + * @author MCD Application Team + * @brief DMA Extension HAL module driver + * This file provides firmware functions to manage the following + * functionalities of the DMA Extension peripheral: + * + Extended features functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The DMA Extension HAL driver can be used as follows: + (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function + for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode. + + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + + (+) To handle the DMAMUX Interrupts, the function HAL_DMAEx_MUX_IRQHandler should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler . + As only one interrupt line is available for all DMAMUX channels and request generators , HAL_DMA_MUX_IRQHandler should be + called with, as parameter, the appropriate DMA handle as many as used DMAs in the user project + (exception done if a given DMA is not using the DMAMUX SYNC block neither a request generator) + + -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed. + -@- When Multi (Double) Buffer mode is enabled, the transfer is circular by default. + -@- In Multi (Double) buffer mode, it is possible to update the base address for + the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. + -@- Multi (Double) buffer mode is possible with DMA and BDMA instances. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup DMAEx DMAEx + * @brief DMA Extended HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private Constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup DMAEx_Private_Functions + * @{ + */ + +static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup DMAEx_Exported_Functions + * @{ + */ + + +/** @addtogroup DMAEx_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Extended features functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and + Start MultiBuffer DMA transfer + (+) Configure the source, destination address and data length and + Start MultiBuffer DMA transfer with interrupt + (+) Change on the fly the memory0 or memory1 address. + (+) Configure the DMA_MUX Synchronization Block using HAL_DMAEx_ConfigMuxSync function. + (+) Configure the DMA_MUX Request Generator Block using HAL_DMAEx_ConfigMuxRequestGenerator function. + (+) Functions HAL_DMAEx_EnableMuxRequestGenerator and HAL_DMAEx_DisableMuxRequestGenerator can then be used + to respectively enable/disable the request generator. + (+) Handle DMAMUX interrupts using HAL_DMAEx_MUX_IRQHandler : should be called from + the DMAMUX IRQ handler i.e DMAMUX1_OVR_IRQHandler or DMAMUX2_OVR_IRQHandler + +@endverbatim + * @{ + */ + + +/** + * @brief Starts the multi_buffer DMA Transfer. + * @param hdma : pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */ + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Memory-to-memory transfer not supported in double buffering mode */ + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + } + else + { + /* Process Locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable the Double buffer mode */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_SxCR_DBM; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U)); + + /* Clear all flags */ + *ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA instance(s) */ + { + /* Enable the Double buffer mode */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= (BDMA_CCR_DBM | BDMA_CCR_CIRC); + + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 4U)); + + /* Clear all flags */ + *ifcRegister_Base = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Configure the source, destination address and the data length */ + DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + /* Enable the peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + status = HAL_ERROR; + } + } + return status; +} + +/** + * @brief Starts the multi_buffer DMA Transfer with interrupt enabled. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t *ifcRegister_Base; /* DMA Stream Interrupt Clear register */ + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Memory-to-memory transfer not supported in double buffering mode */ + if(hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hdma); + + if(HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable the Double buffer mode */ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_SxCR_DBM; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 8U)); + + /* Clear all flags */ + *ifcRegister_Base = 0x3FUL << (hdma->StreamIndex & 0x1FU); + } + else /* BDMA instance(s) */ + { + /* Enable the Double buffer mode */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= (BDMA_CCR_DBM | BDMA_CCR_CIRC); + + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = SecondMemAddress; + + /* Calculate the interrupt clear flag register (IFCR) base address */ + ifcRegister_Base = (uint32_t *)((uint32_t)(hdma->StreamBaseAddress + 4U)); + + /* Clear all flags */ + *ifcRegister_Base = (BDMA_ISR_GIF0) << (hdma->StreamIndex & 0x1FU); + } + + /* Configure the source, destination address and the data length */ + DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + if(hdma->DMAmuxRequestGen != 0U) + { + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + } + } + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Enable Common interrupts*/ + MODIFY_REG(((DMA_Stream_TypeDef *)hdma->Instance)->CR, (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME | DMA_IT_HT), (DMA_IT_TC | DMA_IT_TE | DMA_IT_DME)); + ((DMA_Stream_TypeDef *)hdma->Instance)->FCR |= DMA_IT_FE; + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + /*Enable Half Transfer IT if corresponding Callback is set*/ + ((DMA_Stream_TypeDef *)hdma->Instance)->CR |= DMA_IT_HT; + } + } + else /* BDMA instance(s) */ + { + /* Enable Common interrupts*/ + MODIFY_REG(((BDMA_Channel_TypeDef *)hdma->Instance)->CCR, (BDMA_CCR_TCIE | BDMA_CCR_HTIE | BDMA_CCR_TEIE), (BDMA_CCR_TCIE | BDMA_CCR_TEIE)); + + if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL)) + { + /*Enable Half Transfer IT if corresponding Callback is set*/ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CCR |= BDMA_CCR_HTIE; + } + } + + if(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance) != 0U) /* No DMAMUX available for BDMA1 */ + { + /* Check if DMAMUX Synchronization is enabled*/ + if((hdma->DMAmuxChannel->CCR & DMAMUX_CxCR_SE) != 0U) + { + /* Enable DMAMUX sync overrun IT*/ + hdma->DMAmuxChannel->CCR |= DMAMUX_CxCR_SOIE; + } + + if(hdma->DMAmuxRequestGen != 0U) + { + /* if using DMAMUX request generator, enable the DMAMUX request generator overrun IT*/ + /* enable the request gen overrun IT*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_OIE; + } + } + + /* Enable the peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + status = HAL_ERROR; + } + return status; +} + +/** + * @brief Change the memory0 or memory1 address on the fly. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param Address: The new address + * @param memory: the memory to be changed, This parameter can be one of + * the following values: + * MEMORY0 / + * MEMORY1 + * @note The MEMORY0 address can be changed only when the current transfer use + * MEMORY1 and the MEMORY1 address can be changed only when the current + * transfer use MEMORY0. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory) +{ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + if(memory == MEMORY0) + { + /* change the memory0 address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = Address; + } + else + { + /* change the memory1 address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M1AR = Address; + } + } + else /* BDMA instance(s) */ + { + if(memory == MEMORY0) + { + /* change the memory0 address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = Address; + } + else + { + /* change the memory1 address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM1AR = Address; + } + } + + return HAL_OK; +} + +/** + * @brief Configure the DMAMUX synchronization parameters for a given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param pSyncConfig : pointer to HAL_DMA_MuxSyncConfigTypeDef : contains the DMAMUX synchronization parameters + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig) +{ + uint32_t syncSignalID = 0; + uint32_t syncPolarity = 0; + + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMAMUX_SYNC_STATE(pSyncConfig->SyncEnable)); + assert_param(IS_DMAMUX_SYNC_EVENT(pSyncConfig->EventEnable)); + assert_param(IS_DMAMUX_SYNC_REQUEST_NUMBER(pSyncConfig->RequestNumber)); + + if(pSyncConfig->SyncEnable == ENABLE) + { + assert_param(IS_DMAMUX_SYNC_POLARITY(pSyncConfig->SyncPolarity)); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + assert_param(IS_DMA_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + } + else + { + assert_param(IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(pSyncConfig->SyncSignalID)); + } + syncSignalID = pSyncConfig->SyncSignalID; + syncPolarity = pSyncConfig->SyncPolarity; + } + + /*Check if the DMA state is ready */ + if(hdma->State == HAL_DMA_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Disable the synchronization and event generation before applying a new config */ + CLEAR_BIT(hdma->DMAmuxChannel->CCR,(DMAMUX_CxCR_SE | DMAMUX_CxCR_EGE)); + + /* Set the new synchronization parameters (and keep the request ID filled during the Init)*/ + MODIFY_REG( hdma->DMAmuxChannel->CCR, \ + (~DMAMUX_CxCR_DMAREQ_ID) , \ + (syncSignalID << DMAMUX_CxCR_SYNC_ID_Pos) | \ + ((pSyncConfig->RequestNumber - 1U) << DMAMUX_CxCR_NBREQ_Pos) | \ + syncPolarity | ((uint32_t)pSyncConfig->SyncEnable << DMAMUX_CxCR_SE_Pos) | \ + ((uint32_t)pSyncConfig->EventEnable << DMAMUX_CxCR_EGE_Pos)); + + /* Process Locked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* Return error status */ + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMAMUX request generator block used by the given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param pRequestGeneratorConfig : pointer to HAL_DMA_MuxRequestGeneratorConfigTypeDef : + * contains the request generator parameters. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig) +{ + HAL_StatusTypeDef status; + HAL_DMA_StateTypeDef temp_state = hdma->State; + + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + assert_param(IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + } + else + { + assert_param(IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(pRequestGeneratorConfig->SignalID)); + } + + + assert_param(IS_DMAMUX_REQUEST_GEN_POLARITY(pRequestGeneratorConfig->Polarity)); + assert_param(IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(pRequestGeneratorConfig->RequestNumber)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block + */ + if(hdma->DMAmuxRequestGen == 0U) + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_PARAM; + + /* error status */ + status = HAL_ERROR; + } + else if(((hdma->DMAmuxRequestGen->RGCR & DMAMUX_RGxCR_GE) == 0U) && (temp_state == HAL_DMA_STATE_READY)) + { + /* RequestGenerator must be disable prior to the configuration i.e GE bit is 0 */ + + /* Process Locked */ + __HAL_LOCK(hdma); + + /* Set the request generator new parameters */ + hdma->DMAmuxRequestGen->RGCR = pRequestGeneratorConfig->SignalID | \ + ((pRequestGeneratorConfig->RequestNumber - 1U) << DMAMUX_RGxCR_GNBREQ_Pos)| \ + pRequestGeneratorConfig->Polarity; + /* Process Locked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; + } + else + { + /* Set the error code to busy */ + hdma->ErrorCode = HAL_DMA_ERROR_BUSY; + + /* error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Enable the DMAMUX request generator block used by the given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block */ + if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Enable the request generator*/ + hdma->DMAmuxRequestGen->RGCR |= DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the DMAMUX request generator block used by the given DMA stream (instance). + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma) +{ + /* Check the parameters */ + assert_param(IS_DMA_DMAMUX_ALL_INSTANCE(hdma->Instance)); + + /* check if the DMA state is ready + and DMA is using a DMAMUX request generator block */ + if((hdma->State != HAL_DMA_STATE_RESET) && (hdma->DMAmuxRequestGen != 0U)) + { + /* Disable the request generator*/ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_GE; + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handles DMAMUX interrupt request. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @retval None + */ +void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma) +{ + /* Check for DMAMUX Synchronization overrun */ + if((hdma->DMAmuxChannelStatus->CSR & hdma->DMAmuxChannelStatusMask) != 0U) + { + /* Disable the synchro overrun interrupt */ + hdma->DMAmuxChannel->CCR &= ~DMAMUX_CxCR_SOIE; + + /* Clear the DMAMUX synchro overrun flag */ + hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_SYNC; + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + + if(hdma->DMAmuxRequestGen != 0) + { + /* if using a DMAMUX request generator block Check for DMAMUX request generator overrun */ + if((hdma->DMAmuxRequestGenStatus->RGSR & hdma->DMAmuxRequestGenStatusMask) != 0U) + { + /* Disable the request gen overrun interrupt */ + hdma->DMAmuxRequestGen->RGCR &= ~DMAMUX_RGxCR_OIE; + + /* Clear the DMAMUX request generator overrun flag */ + hdma->DMAmuxRequestGenStatus->RGCFR = hdma->DMAmuxRequestGenStatusMask; + + /* Update error code */ + hdma->ErrorCode |= HAL_DMA_ERROR_REQGEN; + + if(hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + } +} + + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMAEx_Private_Functions + * @{ + */ + +/** + * @brief Set the DMA Transfer parameter. + * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Stream. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param DataLength: The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + if(IS_DMA_STREAM_INSTANCE(hdma->Instance) != 0U) /* DMA1 or DMA2 instance */ + { + /* Configure DMA Stream data length */ + ((DMA_Stream_TypeDef *)hdma->Instance)->NDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = DstAddress; + + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->PAR = SrcAddress; + + /* Configure DMA Stream destination address */ + ((DMA_Stream_TypeDef *)hdma->Instance)->M0AR = DstAddress; + } + } + else /* BDMA instance(s) */ + { + /* Configure DMA Stream data length */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CNDTR = DataLength; + + /* Peripheral to Memory */ + if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = DstAddress; + + /* Configure DMA Stream source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = SrcAddress; + } + /* Memory to Peripheral */ + else + { + /* Configure DMA Stream source address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CPAR = SrcAddress; + + /* Configure DMA Stream destination address */ + ((BDMA_Channel_TypeDef *)hdma->Instance)->CM0AR = DstAddress; + } + } +} + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c new file mode 100644 index 0000000..c9090f7 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c @@ -0,0 +1,859 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_exti.c + * @author MCD Application Team + * @brief EXTI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (EXTI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### EXTI Peripheral features ##### + ============================================================================== + [..] + (+) Each Exti line can be configured within this driver. + + (+) Exti line can be configured in 3 different modes + (++) Interrupt (CORE1 or CORE2 in case of dual core line ) + (++) Event (CORE1 or CORE2 in case of dual core line ) + (++) a combination of the previous + + (+) Configurable Exti lines can be configured with 3 different triggers + (++) Rising + (++) Falling + (++) Both of them + + (+) When set in interrupt mode, configurable Exti lines have two diffenrents + interrupt pending registers which allow to distinguish which transition + occurs: + (++) Rising edge pending interrupt + (++) Falling + + (+) Exti lines 0 to 15 are linked to gpio pin number 0 to 15. Gpio port can + be selected through multiplexer. + + (+) PendClearSource used to set the D3 Smart Run Domain autoamtic pend clear source. + It is applicable for line with wkaeup target is Any (CPU1 , CPU2 and D3 smart run domain). + Value can be one of the following: + (++) EXTI_D3_PENDCLR_SRC_NONE : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 0 + (+++) On a configurable Line : the D3 domain wakeup signal is + automatically cleared after after the Delay + Rising Edge detect + (+++) On a direct Line : the D3 domain wakeup signal is + cleared after the direct event input signal is cleared + + (++) EXTI_D3_PENDCLR_SRC_DMACH6 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b00 : + DMA ch6 event selected as D3 domain pendclear source + + (++) EXTI_D3_PENDCLR_SRC_DMACH7 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b01 : + DMA ch7 event selected as D3 domain pendclear source + + (++) EXTI_D3_PENDCLR_SRC_LPTIM4 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b10 : + LPTIM4 out selected as D3 domain pendclear source + + (++) EXTI_D3_PENDCLR_SRC_LPTIM5 : no pend clear source is selected : + In this case corresponding bit of D2PMRx register is set to 1 + and corresponding bits(2) of D3PCRxL/H is set to b11 : + LPTIM5 out selected as D3 domain pendclear source + + + ##### How to use this driver ##### + ============================================================================== + [..] + + (#) Configure the EXTI line using HAL_EXTI_SetConfigLine(). + (++) Choose the interrupt line number by setting "Line" member from + EXTI_ConfigTypeDef structure. + (++) Configure the interrupt and/or event mode using "Mode" member from + EXTI_ConfigTypeDef structure. + (++) For configurable lines, configure rising and/or falling trigger + "Trigger" member from EXTI_ConfigTypeDef structure. + (++) For Exti lines linked to gpio, choose gpio port using "GPIOSel" + member from GPIO_InitTypeDef structure. + (++) For Exti lines with wkaeup target is Any (CPU1 , CPU2 and D3 smart run domain), + choose gpio D3 PendClearSource using PendClearSource + member from EXTI_PendClear_Source structure. + + (#) Get current Exti configuration of a dedicated line using + HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + (++) Provide pointer on EXTI_ConfigTypeDef structure as second parameter. + + (#) Clear Exti configuration of a dedicated line using HAL_EXTI_GetConfigLine(). + (++) Provide exiting handle as parameter. + + (#) Register callback to treat Exti interrupts using HAL_EXTI_RegisterCallback(). + (++) Provide exiting handle as first parameter. + (++) Provide which callback will be registered using one value from + EXTI_CallbackIDTypeDef. + (++) Provide callback function pointer. + + (#) Get interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Clear interrupt pending bit using HAL_EXTI_GetPending(). + + (#) Generate software interrupt using HAL_EXTI_GenerateSWI(). + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +#ifdef HAL_EXTI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @defgroup EXTI_Private_Constants EXTI Private Constants + * @{ + */ +#define EXTI_MODE_OFFSET 0x04U /* 0x10: offset between CPU IMR/EMR registers */ +#define EXTI_CONFIG_OFFSET 0x08U /* 0x20: offset between CPU Rising/Falling configuration registers */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup EXTI_Exported_Functions + * @{ + */ + +/** @addtogroup EXTI_Exported_Functions_Group1 + * @brief Configuration functions + * +@verbatim + =============================================================================== + ##### Configuration functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Set configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on EXTI configuration to be set. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + uint32_t pcrlinepos; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_EXTI_LINE(pExtiConfig->Line)); + assert_param(IS_EXTI_MODE(pExtiConfig->Mode)); + + /* Assign line number to handle */ + hexti->Line = pExtiConfig->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* Configure triggers for configurable lines */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00U) + { + assert_param(IS_EXTI_TRIGGER(pExtiConfig->Trigger)); + + /* Configure rising trigger */ + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_RISING) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store rising trigger mode */ + *regaddr = regval; + + /* Configure falling trigger */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Trigger & EXTI_TRIGGER_FALLING) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store falling trigger mode */ + *regaddr = regval; + + /* Configure gpio port selection in case of gpio exti line */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PORT(pExtiConfig->GPIOSel)); + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + regval |= (pExtiConfig->GPIOSel << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03U))); + SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL] = regval; + } + } + + /* Configure interrupt mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_INTERRUPT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_EVENT) != EXTI_MODE_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_EVENT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; + +#if defined (DUAL_CORE) + /* Configure interrupt mode for Core2 : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_CORE2_INTERRUPT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store interrupt mode */ + *regaddr = regval; + + /* The event mode cannot be configured if the line does not support it */ + assert_param(((pExtiConfig->Line & EXTI_EVENT) == EXTI_EVENT) || ((pExtiConfig->Mode & EXTI_MODE_CORE2_EVENT) != EXTI_MODE_CORE2_EVENT)); + + /* Configure event mode : read current mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Mask or set line */ + if ((pExtiConfig->Mode & EXTI_MODE_CORE2_EVENT) != 0x00U) + { + regval |= maskline; + } + else + { + regval &= ~maskline; + } + + /* Store event mode */ + *regaddr = regval; +#endif /* DUAL_CORE */ + + /* Configure the D3 PendClear source in case of Wakeup target is Any */ + if ((pExtiConfig->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL) + { + assert_param(IS_EXTI_D3_PENDCLR_SRC(pExtiConfig->PendClearSource)); + + /*Calc the PMR register address for the given line */ + regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + if(pExtiConfig->PendClearSource == EXTI_D3_PENDCLR_SRC_NONE) + { + /* Clear D3PMRx register for the given line */ + regval &= ~maskline; + /* Store D3PMRx register value */ + *regaddr = regval; + } + else + { + /* Set D3PMRx register to 1 for the given line */ + regval |= maskline; + /* Store D3PMRx register value */ + *regaddr = regval; + + if(linepos < 16UL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << linepos; + } + else + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << (linepos - 16UL); + } + + regval = (*regaddr & (~(pcrlinepos * pcrlinepos * 3UL))) | (pcrlinepos * pcrlinepos * (pExtiConfig->PendClearSource - 1UL)); + *regaddr = regval; + } + } + + return HAL_OK; +} + + +/** + * @brief Get configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @param pExtiConfig Pointer on structure to store Exti configuration. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + uint32_t pcrlinepos; + + /* Check null pointer */ + if ((hexti == NULL) || (pExtiConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* Store handle line number to configuration structure */ + pExtiConfig->Line = hexti->Line; + + /* compute line register offset and line mask */ + offset = ((pExtiConfig->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (pExtiConfig->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* 1] Get core mode : interrupt */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + pExtiConfig->Mode = EXTI_MODE_NONE; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode = EXTI_MODE_INTERRUPT; + } + + /* Get event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode |= EXTI_MODE_EVENT; + } +#if defined (DUAL_CORE) + regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode = EXTI_MODE_CORE2_INTERRUPT; + } + + /* Get event mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = *regaddr; + + /* Check if selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Mode |= EXTI_MODE_CORE2_EVENT; + } +#endif /*DUAL_CORE*/ + + /* Get default Trigger and GPIOSel configuration */ + pExtiConfig->Trigger = EXTI_TRIGGER_NONE; + pExtiConfig->GPIOSel = 0x00U; + + /* 2] Get trigger for configurable lines : rising */ + if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00U) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Trigger = EXTI_TRIGGER_RISING; + } + + /* Get falling configuration */ + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = *regaddr; + + /* Check if configuration of selected line is enable */ + if ((regval & maskline) != 0x00U) + { + pExtiConfig->Trigger |= EXTI_TRIGGER_FALLING; + } + + /* Get Gpio port selection for gpio lines */ + if ((pExtiConfig->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL]; + pExtiConfig->GPIOSel = (regval >> (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03u))) & SYSCFG_EXTICR1_EXTI0; + } + } + + /* Get default Pend Clear Source */ + pExtiConfig->PendClearSource = EXTI_D3_PENDCLR_SRC_NONE; + + /* 3] Get D3 Pend Clear source */ + if ((pExtiConfig->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset)); + if(((*regaddr) & linepos) != 0UL) + { + /* if wakeup target is any and PMR set, the read pend clear source from D3PCRxL/H */ + if(linepos < 16UL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << linepos; + } + else + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << (linepos - 16UL); + } + + pExtiConfig->PendClearSource = 1UL + ((*regaddr & (pcrlinepos * pcrlinepos * 3UL)) / (pcrlinepos * pcrlinepos)); + } + } + + return HAL_OK; +} + + +/** + * @brief Clear whole configuration of a dedicated Exti line. + * @param hexti Exti handle. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + uint32_t pcrlinepos; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + /* Check the parameter */ + assert_param(IS_EXTI_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + + /* 1] Clear interrupt mode */ + regaddr = (__IO uint32_t *)(&EXTI->IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear event mode */ + regaddr = (__IO uint32_t *)(&EXTI->EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + +#if defined (DUAL_CORE) + /* 1] Clear CM4 interrupt mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2IMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* 2] Clear CM4 event mode */ + regaddr = (__IO uint32_t *)(&EXTI->C2EMR1 + (EXTI_MODE_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; +#endif /* DUAL_CORE */ + + /* 3] Clear triggers in case of configurable lines */ + if ((hexti->Line & EXTI_CONFIG) != 0x00U) + { + regaddr = (__IO uint32_t *)(&EXTI->RTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + regaddr = (__IO uint32_t *)(&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset)); + regval = (*regaddr & ~maskline); + *regaddr = regval; + + /* Get Gpio port selection for gpio lines */ + if ((hexti->Line & EXTI_GPIO) == EXTI_GPIO) + { + assert_param(IS_EXTI_GPIO_PIN(linepos)); + + regval = SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL]; + regval &= ~(SYSCFG_EXTICR1_EXTI0 << (SYSCFG_EXTICR1_EXTI1_Pos * (linepos & 0x03UL))); + SYSCFG->EXTICR[(linepos >> 2U) & 0x03UL] = regval; + } + } + + /* 4] Clear D3 Config lines */ + if ((hexti->Line & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PMR1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = (*regaddr & ~maskline); + + if(linepos < 16UL) + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1L + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << linepos; + } + else + { + regaddr = (__IO uint32_t *)(&EXTI->D3PCR1H + (EXTI_CONFIG_OFFSET * offset)); + pcrlinepos = 1UL << (linepos - 16UL); + } + + /*Clear D3 PendClear source */ + *regaddr &= (~(pcrlinepos * pcrlinepos * 3UL)); + } + + return HAL_OK; +} + + +/** + * @brief Register callback for a dedicated Exti line. + * @param hexti Exti handle. + * @param CallbackID User callback identifier. + * This parameter can be one of @arg @ref EXTI_CallbackIDTypeDef values. + * @param pPendingCbfn function pointer to be stored as callback. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + + switch (CallbackID) + { + case HAL_EXTI_COMMON_CB_ID: + hexti->PendingCallback = pPendingCbfn; + break; + + default: + status = HAL_ERROR; + break; + } + + return status; +} + + +/** + * @brief Store line number as handle private field. + * @param hexti Exti handle. + * @param ExtiLine Exti line number. + * This parameter can be from 0 to @ref EXTI_LINE_NB. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine) +{ + /* Check the parameters */ + assert_param(IS_EXTI_LINE(ExtiLine)); + + /* Check null pointer */ + if (hexti == NULL) + { + return HAL_ERROR; + } + else + { + /* Store line number as handle private field */ + hexti->Line = ExtiLine; + + return HAL_OK; + } +} + + +/** + * @} + */ + +/** @addtogroup EXTI_Exported_Functions_Group2 + * @brief EXTI IO functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Handle EXTI interrupt request. + * @param hexti Exti handle. + * @retval none. + */ +void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t maskline; + uint32_t offset; + + /* Compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + } + else /* Cortex-M4*/ + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset)); + } +#else + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); +#endif /* DUAL_CORE */ + + /* Get pending bit */ + regval = (*regaddr & maskline); + + if (regval != 0x00U) + { + /* Clear pending bit */ + *regaddr = maskline; + + /* Call callback */ + if (hexti->PendingCallback != NULL) + { + hexti->PendingCallback(); + } + } +} + + +/** + * @brief Get interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be checked. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval 1 if interrupt is pending else 0. + */ +uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t regval; + uint32_t linepos; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + linepos = (hexti->Line & EXTI_PIN_MASK); + maskline = (1UL << linepos); + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + } + else /* Cortex-M4 */ + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset)); + } +#else + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); +#endif /* DUAL_CORE */ + + /* return 1 if bit is set else 0 */ + regval = ((*regaddr & maskline) >> linepos); + return regval; +} + + +/** + * @brief Clear interrupt pending bit of a dedicated line. + * @param hexti Exti handle. + * @param Edge Specify which pending edge as to be clear. + * This parameter can be one of the following values: + * @arg @ref EXTI_TRIGGER_RISING_FALLING + * This parameter is kept for compatibility with other series. + * @retval None. + */ +void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + assert_param(IS_EXTI_PENDING_EDGE(Edge)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + +#if defined(DUAL_CORE) + if (HAL_GetCurrentCPUID() == CM7_CPUID) + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); + } + else /* Cortex-M4 */ + { + /* Get pending register address */ + regaddr = (__IO uint32_t *)(&EXTI->C2PR1 + (EXTI_MODE_OFFSET * offset)); + } +#else + regaddr = (__IO uint32_t *)(&EXTI->PR1 + (EXTI_MODE_OFFSET * offset)); +#endif /* DUAL_CORE */ + + /* Clear Pending bit */ + *regaddr = maskline; +} + +/** + * @brief Generate a software interrupt for a dedicated line. + * @param hexti Exti handle. + * @retval None. + */ +void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti) +{ + __IO uint32_t *regaddr; + uint32_t maskline; + uint32_t offset; + + /* Check parameters */ + assert_param(IS_EXTI_LINE(hexti->Line)); + assert_param(IS_EXTI_CONFIG_LINE(hexti->Line)); + + /* compute line register offset and line mask */ + offset = ((hexti->Line & EXTI_REG_MASK) >> EXTI_REG_SHIFT); + maskline = (1UL << (hexti->Line & EXTI_PIN_MASK)); + + regaddr = (__IO uint32_t *)(&EXTI->SWIER1 + (EXTI_CONFIG_OFFSET * offset)); + *regaddr = maskline; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_EXTI_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c new file mode 100644 index 0000000..a3fe346 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c @@ -0,0 +1,1201 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + * + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface manages CPU AXI I-Code and D-Code accesses + to the Flash memory. It implements the erase and program Flash memory operations + and the read and write protection mechanisms. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + (+) Option bytes programming + (+) Error code correction (ECC) : Data in flash are 266-bits word + (10 bits added per flash word) + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory of all STM32H7xx devices. + + (#) FLASH Memory IO Programming functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Program functions: 256-bit word only + (++) There Two modes of programming : + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + + (#) Interrupts and flags management functions : + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_FLASH_GetError() + + (#) Option bytes management functions : + (++) Lock and Unlock the option bytes using HAL_FLASH_OB_Unlock() and + HAL_FLASH_OB_Lock() functions + (++) Launch the reload of the option bytes using HAL_FLASH_OB_Launch() function. + In this case, a reset is generated + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the latency + (+) Enable/Disable the FLASH interrupts + (+) Monitor the FLASH flags status + [..] + (@) For any Flash memory program operation (erase or program), the CPU clock frequency + (HCLK) must be at least 1MHz. + (@) The contents of the Flash memory are not guaranteed if a device reset occurs during + a Flash memory operation. + (@) The application can simultaneously request a read and a write operation through each AXI + interface. + As the Flash memory is divided into two independent banks, the embedded Flash + memory interface can drive different operations at the same time on each bank. For + example a read, write or erase operation can be executed on bank 1 while another read, + write or erase operation is executed on bank 2. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup FLASH_Private_Variables + * @{ + */ +FLASH_ProcessTypeDef pFlash; +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Functions FLASH Exported functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program a flash word at a specified address + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param FlashAddress specifies the address to be programmed. + * This parameter shall be aligned to the Flash word: + * - 256 bits for STM32H74x/5X devices (8x 32bits words) + * - 128 bits for STM32H7Ax/BX devices (4x 32bits words) + * - 256 bits for STM32H72x/3X devices (8x 32bits words) + * @param DataAddress specifies the address of data to be programmed. + * This parameter shall be 32-bit aligned + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress) +{ + HAL_StatusTypeDef status; + __IO uint32_t *dest_addr = (__IO uint32_t *)FlashAddress; + __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; + uint32_t bank; + uint8_t row_index = FLASH_NB_32BITWORD_IN_FLASHWORD; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(FlashAddress)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + +#if defined (FLASH_OPTCR_PG_OTP) + if((IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) || (IS_FLASH_PROGRAM_ADDRESS_OTP(FlashAddress))) +#else + if(IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) +#endif /* FLASH_OPTCR_PG_OTP */ + { + bank = FLASH_BANK_1; + } +#if defined (DUAL_BANK) + else if(IS_FLASH_PROGRAM_ADDRESS_BANK2(FlashAddress)) + { + bank = FLASH_BANK_2; + } +#endif /* DUAL_BANK */ + else + { + return HAL_ERROR; + } + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, bank); + + if(status == HAL_OK) + { +#if defined (DUAL_BANK) + if(bank == FLASH_BANK_1) + { +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } + } + else + { + /* Set PG bit */ + SET_BIT(FLASH->CR2, FLASH_CR_PG); + } +#else /* Single Bank */ +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } +#endif /* DUAL_BANK */ + + __ISB(); + __DSB(); + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Program an OTP word (16 bits) */ + *(__IO uint16_t *)FlashAddress = *(__IO uint16_t*)DataAddress; + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Program the flash word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + row_index--; + } while (row_index != 0U); + } + + __ISB(); + __DSB(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, bank); + +#if defined (DUAL_BANK) +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* If the program operation is completed, disable the OTP_PG */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + if(bank == FLASH_BANK_1) + { + /* If the program operation is completed, disable the PG */ + CLEAR_BIT(FLASH->CR1, FLASH_CR_PG); + } + else + { + /* If the program operation is completed, disable the PG */ + CLEAR_BIT(FLASH->CR2, FLASH_CR_PG); + } + } +#else /* Single Bank */ +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* If the program operation is completed, disable the OTP_PG */ + CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* If the program operation is completed, disable the PG */ + CLEAR_BIT(FLASH->CR1, FLASH_CR_PG); + } +#endif /* DUAL_BANK */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Program a flash word at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_Type_Program + * @param FlashAddress specifies the address to be programmed. + * This parameter shall be aligned to the Flash word: + * - 256 bits for STM32H74x/5X devices (8x 32bits words) + * - 128 bits for STM32H7Ax/BX devices (4x 32bits words) + * - 256 bits for STM32H72x/3X devices (8x 32bits words) + * @param DataAddress specifies the address of data to be programmed. + * This parameter shall be 32-bit aligned + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress) +{ + HAL_StatusTypeDef status; + __IO uint32_t *dest_addr = (__IO uint32_t*)FlashAddress; + __IO uint32_t *src_addr = (__IO uint32_t*)DataAddress; + uint32_t bank; + uint8_t row_index = FLASH_NB_32BITWORD_IN_FLASHWORD; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(FlashAddress)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + +#if defined (FLASH_OPTCR_PG_OTP) + if((IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) || (IS_FLASH_PROGRAM_ADDRESS_OTP(FlashAddress))) +#else + if(IS_FLASH_PROGRAM_ADDRESS_BANK1(FlashAddress)) +#endif /* FLASH_OPTCR_PG_OTP */ + { + bank = FLASH_BANK_1; + } +#if defined (DUAL_BANK) + else if(IS_FLASH_PROGRAM_ADDRESS_BANK2(FlashAddress)) + { + bank = FLASH_BANK_2; + } +#endif /* DUAL_BANK */ + else + { + return HAL_ERROR; + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, bank); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + pFlash.Address = FlashAddress; + +#if defined (DUAL_BANK) + if(bank == FLASH_BANK_1) + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_BANK1; + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } + + /* Enable End of Operation and Error interrupts for Bank 1 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); +#else + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); +#endif /* FLASH_CR_OPERRIE */ + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_BANK2; + + /* Set PG bit */ + SET_BIT(FLASH->CR2, FLASH_CR_PG); + + /* Enable End of Operation and Error interrupts for Bank2 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2); +#else + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2); +#endif /* FLASH_CR_OPERRIE */ + } +#else /* Single Bank */ + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM_BANK1; + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Set OTP_PG bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OTP); + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Set PG bit */ + SET_BIT(FLASH->CR1, FLASH_CR_PG); + } + + /* Enable End of Operation and Error interrupts for Bank 1 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); +#else + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); +#endif /* FLASH_CR_OPERRIE */ +#endif /* DUAL_BANK */ + + __ISB(); + __DSB(); + +#if defined (FLASH_OPTCR_PG_OTP) + if (TypeProgram == FLASH_TYPEPROGRAM_OTPWORD) + { + /* Program an OTP word (16 bits) */ + *(__IO uint16_t *)FlashAddress = *(__IO uint16_t*)DataAddress; + } + else +#endif /* FLASH_OPTCR_PG_OTP */ + { + /* Program the flash word */ + do + { + *dest_addr = *src_addr; + dest_addr++; + src_addr++; + row_index--; + } while (row_index != 0U); + } + + __ISB(); + __DSB(); + } + + return status; +} + +/** + * @brief This function handles FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t temp; + uint32_t errorflag; + FLASH_ProcedureTypeDef procedure; + + /* Check FLASH Bank1 End of Operation flag */ + if(__HAL_FLASH_GET_FLAG_BANK1(FLASH_SR_EOP) != RESET) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE_BANK1) + { + /* Nb of sector to erased can be decreased */ + pFlash.NbSectorsToErase--; + + /* Check if there are still sectors to erase */ + if(pFlash.NbSectorsToErase != 0U) + { + /* Indicate user which sector has been erased */ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear bank 1 End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + + /* Increment sector number */ + pFlash.Sector++; + temp = pFlash.Sector; + FLASH_Erase_Sector(temp, FLASH_BANK_1, pFlash.VoltageForErase); + } + else + { + /* No more sectors to Erase, user callback can be called */ + /* Reset Sector and stop Erase sectors procedure */ + pFlash.Sector = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + } + } + else + { + procedure = pFlash.ProcedureOnGoing; + + if((procedure == FLASH_PROC_MASSERASE_BANK1) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /* MassErase ended. Return the selected bank */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(FLASH_BANK_1); + } + else if(procedure == FLASH_PROC_PROGRAM_BANK1) + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else + { + /* Nothing to do */ + } + + if((procedure != FLASH_PROC_SECTERASE_BANK2) && \ + (procedure != FLASH_PROC_MASSERASE_BANK2) && \ + (procedure != FLASH_PROC_PROGRAM_BANK2)) + { + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + } + } + } + +#if defined (DUAL_BANK) + /* Check FLASH Bank2 End of Operation flag */ + if(__HAL_FLASH_GET_FLAG_BANK2(FLASH_SR_EOP) != RESET) + { + if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE_BANK2) + { + /*Nb of sector to erased can be decreased*/ + pFlash.NbSectorsToErase--; + + /* Check if there are still sectors to erase*/ + if(pFlash.NbSectorsToErase != 0U) + { + /*Indicate user which sector has been erased*/ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear bank 2 End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + + /*Increment sector number*/ + pFlash.Sector++; + temp = pFlash.Sector; + FLASH_Erase_Sector(temp, FLASH_BANK_2, pFlash.VoltageForErase); + } + else + { + /* No more sectors to Erase, user callback can be called */ + /* Reset Sector and stop Erase sectors procedure */ + pFlash.Sector = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Sector); + + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + } + } + else + { + procedure = pFlash.ProcedureOnGoing; + + if((procedure == FLASH_PROC_MASSERASE_BANK2) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /*MassErase ended. Return the selected bank*/ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(FLASH_BANK_2); + } + else if(procedure == FLASH_PROC_PROGRAM_BANK2) + { + /* Program ended. Return the selected address */ + /* FLASH EOP interrupt user callback */ + HAL_FLASH_EndOfOperationCallback(pFlash.Address); + } + else + { + /* Nothing to do */ + } + + if((procedure != FLASH_PROC_SECTERASE_BANK1) && \ + (procedure != FLASH_PROC_MASSERASE_BANK1) && \ + (procedure != FLASH_PROC_PROGRAM_BANK1)) + { + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + } + } + } +#endif /* DUAL_BANK */ + + /* Check FLASH Bank1 operation error flags */ +#if defined (FLASH_SR_OPERR) + errorflag = FLASH->SR1 & (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | FLASH_FLAG_STRBERR_BANK1 | \ + FLASH_FLAG_INCERR_BANK1 | FLASH_FLAG_OPERR_BANK1); +#else + errorflag = FLASH->SR1 & (FLASH_FLAG_WRPERR_BANK1 | FLASH_FLAG_PGSERR_BANK1 | FLASH_FLAG_STRBERR_BANK1 | \ + FLASH_FLAG_INCERR_BANK1); +#endif /* FLASH_SR_OPERR */ + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= errorflag; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG_BANK1(errorflag); + + procedure = pFlash.ProcedureOnGoing; + + if(procedure == FLASH_PROC_SECTERASE_BANK1) + { + /* Return the faulty sector */ + temp = pFlash.Sector; + pFlash.Sector = 0xFFFFFFFFU; + } + else if((procedure == FLASH_PROC_MASSERASE_BANK1) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /* Return the faulty bank */ + temp = FLASH_BANK_1; + } + else + { + /* Return the faulty address */ + temp = pFlash.Address; + } + + /* Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(temp); + } + +#if defined (DUAL_BANK) + /* Check FLASH Bank2 operation error flags */ +#if defined (FLASH_SR_OPERR) + errorflag = FLASH->SR2 & ((FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | FLASH_FLAG_STRBERR_BANK2 | \ + FLASH_FLAG_INCERR_BANK2 | FLASH_FLAG_OPERR_BANK2) & 0x7FFFFFFFU); +#else + errorflag = FLASH->SR2 & ((FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGSERR_BANK2 | FLASH_FLAG_STRBERR_BANK2 | \ + FLASH_FLAG_INCERR_BANK2) & 0x7FFFFFFFU); +#endif /* FLASH_SR_OPERR */ + + if(errorflag != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= (errorflag | 0x80000000U); + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG_BANK2(errorflag); + + procedure = pFlash.ProcedureOnGoing; + + if(procedure== FLASH_PROC_SECTERASE_BANK2) + { + /*return the faulty sector*/ + temp = pFlash.Sector; + pFlash.Sector = 0xFFFFFFFFU; + } + else if((procedure == FLASH_PROC_MASSERASE_BANK2) || (procedure == FLASH_PROC_ALLBANK_MASSERASE)) + { + /*return the faulty bank*/ + temp = FLASH_BANK_2; + } + else + { + /*return the faulty address*/ + temp = pFlash.Address; + } + + /*Stop the procedure ongoing*/ + pFlash.ProcedureOnGoing = FLASH_PROC_NONE; + + /* FLASH error interrupt user callback */ + HAL_FLASH_OperationErrorCallback(temp); + } +#endif /* DUAL_BANK */ + + if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) + { +#if defined (FLASH_CR_OPERRIE) + /* Disable Bank1 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); + +#if defined (DUAL_BANK) + /* Disable Bank2 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2); +#endif /* DUAL_BANK */ +#else + /* Disable Bank1 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); + +#if defined (DUAL_BANK) + /* Disable Bank2 Operation and Error source interrupt */ + __HAL_FLASH_DISABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2); +#endif /* DUAL_BANK */ +#endif /* FLASH_CR_OPERRIE */ + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sectors Erase: Sector which has been erased + * (if 0xFFFFFFFF, it means that all the selected sectors have been erased) + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: Bank number which has been requested to erase + * Sectors Erase: Sector number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions + * @brief Management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the FLASH + memory operations. + +@endverbatim + * @{ + */ + +/** + * @brief Unlock the FLASH control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Unlock(void) +{ + if(READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank1 Registers access */ + WRITE_REG(FLASH->KEYR1, FLASH_KEY1); + WRITE_REG(FLASH->KEYR1, FLASH_KEY2); + + /* Verify Flash Bank1 is unlocked */ + if (READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + +#if defined (DUAL_BANK) + if(READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank2 Registers access */ + WRITE_REG(FLASH->KEYR2, FLASH_KEY1); + WRITE_REG(FLASH->KEYR2, FLASH_KEY2); + + /* Verify Flash Bank2 is unlocked */ + if (READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + return HAL_OK; +} + +/** + * @brief Locks the FLASH control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Lock(void) +{ + /* Set the LOCK Bit to lock the FLASH Bank1 Control Register access */ + SET_BIT(FLASH->CR1, FLASH_CR_LOCK); + + /* Verify Flash Bank1 is locked */ + if (READ_BIT(FLASH->CR1, FLASH_CR_LOCK) == 0U) + { + return HAL_ERROR; + } + +#if defined (DUAL_BANK) + /* Set the LOCK Bit to lock the FLASH Bank2 Control Register access */ + SET_BIT(FLASH->CR2, FLASH_CR_LOCK); + + /* Verify Flash Bank2 is locked */ + if (READ_BIT(FLASH->CR2, FLASH_CR_LOCK) == 0U) + { + return HAL_ERROR; + } +#endif /* DUAL_BANK */ + + return HAL_OK; +} + +/** + * @brief Unlock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) +{ + if(READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + /* Authorizes the Option Byte registers programming */ + WRITE_REG(FLASH->OPTKEYR, FLASH_OPT_KEY1); + WRITE_REG(FLASH->OPTKEYR, FLASH_OPT_KEY2); + + /* Verify that the Option Bytes are unlocked */ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Lock the FLASH Option Control Registers access. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) +{ + /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK); + + /* Verify that the Option Bytes are locked */ + if (READ_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTLOCK) == 0U) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Launch the option bytes loading. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) +{ + HAL_StatusTypeDef status; + + /* Wait for CRC computation to be completed */ + if (FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } +#if defined (DUAL_BANK) + else if (FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } +#endif /* DUAL_BANK */ + else + { + status = HAL_OK; + } + + if (status == HAL_OK) + { + /* Set OPTSTRT Bit */ + SET_BIT(FLASH->OPTCR, FLASH_OPTCR_OPTSTART); + + /* Wait for OB change operation to be completed */ + status = FLASH_OB_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + } + + return status; +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval HAL_FLASH_ERRORCode The returned value can be: + * @arg HAL_FLASH_ERROR_NONE : No error set + * + * @arg HAL_FLASH_ERROR_WRP_BANK1 : Write Protection Error on Bank 1 + * @arg HAL_FLASH_ERROR_PGS_BANK1 : Program Sequence Error on Bank 1 + * @arg HAL_FLASH_ERROR_STRB_BANK1 : Strobe Error on Bank 1 + * @arg HAL_FLASH_ERROR_INC_BANK1 : Inconsistency Error on Bank 1 + * @arg HAL_FLASH_ERROR_OPE_BANK1 : Operation Error on Bank 1 + * @arg HAL_FLASH_ERROR_RDP_BANK1 : Read Protection Error on Bank 1 + * @arg HAL_FLASH_ERROR_RDS_BANK1 : Read Secured Error on Bank 1 + * @arg HAL_FLASH_ERROR_SNECC_BANK1: ECC Single Correction Error on Bank 1 + * @arg HAL_FLASH_ERROR_DBECC_BANK1: ECC Double Detection Error on Bank 1 + * @arg HAL_FLASH_ERROR_CRCRD_BANK1: CRC Read Error on Bank 1 + * + * @arg HAL_FLASH_ERROR_WRP_BANK2 : Write Protection Error on Bank 2 + * @arg HAL_FLASH_ERROR_PGS_BANK2 : Program Sequence Error on Bank 2 + * @arg HAL_FLASH_ERROR_STRB_BANK2 : Strobe Error on Bank 2 + * @arg HAL_FLASH_ERROR_INC_BANK2 : Inconsistency Error on Bank 2 + * @arg HAL_FLASH_ERROR_OPE_BANK2 : Operation Error on Bank 2 + * @arg HAL_FLASH_ERROR_RDP_BANK2 : Read Protection Error on Bank 2 + * @arg HAL_FLASH_ERROR_RDS_BANK2 : Read Secured Error on Bank 2 + * @arg HAL_FLASH_ERROR_SNECC_BANK2: SNECC Error on Bank 2 + * @arg HAL_FLASH_ERROR_DBECC_BANK2: Double Detection ECC on Bank 2 + * @arg HAL_FLASH_ERROR_CRCRD_BANK2: CRC Read Error on Bank 2 +*/ + +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout maximum flash operation timeout + * @param Bank flash FLASH_BANK_1 or FLASH_BANK_2 + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout, uint32_t Bank) +{ + /* Wait for the FLASH operation to complete by polling on QW flag to be reset. + Even if the FLASH operation fails, the QW flag will be reset and an error + flag will be set */ + + uint32_t bsyflag = FLASH_FLAG_QW_BANK1; + uint32_t errorflag = 0; + uint32_t tickstart = HAL_GetTick(); + + assert_param(IS_FLASH_BANK_EXCLUSIVE(Bank)); + +#if defined (DUAL_BANK) + + if (Bank == FLASH_BANK_2) + { + /* Select bsyflag depending on Bank */ + bsyflag = FLASH_FLAG_QW_BANK2; + } +#endif /* DUAL_BANK */ + + while(__HAL_FLASH_GET_FLAG(bsyflag)) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Get Error Flags */ + if (Bank == FLASH_BANK_1) + { + errorflag = FLASH->SR1 & FLASH_FLAG_ALL_ERRORS_BANK1; + } +#if defined (DUAL_BANK) + else + { + errorflag = (FLASH->SR2 & FLASH_FLAG_ALL_ERRORS_BANK2) | 0x80000000U; + } +#endif /* DUAL_BANK */ + + /* In case of error reported in Flash SR1 or SR2 register */ + if((errorflag & 0x7FFFFFFFU) != 0U) + { + /*Save the error code*/ + pFlash.ErrorCode |= errorflag; + + /* Clear error programming flags */ + __HAL_FLASH_CLEAR_FLAG(errorflag); + + return HAL_ERROR; + } + + /* Check FLASH End of Operation flag */ + if(Bank == FLASH_BANK_1) + { + if (__HAL_FLASH_GET_FLAG_BANK1(FLASH_FLAG_EOP_BANK1)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_EOP_BANK1); + } + } +#if defined (DUAL_BANK) + else + { + if (__HAL_FLASH_GET_FLAG_BANK2(FLASH_FLAG_EOP_BANK2)) + { + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_EOP_BANK2); + } + } +#endif /* DUAL_BANK */ + + return HAL_OK; +} + +/** + * @brief Wait for a FLASH Option Bytes change operation to complete. + * @param Timeout maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_OB_WaitForLastOperation(uint32_t Timeout) +{ + /* Get timeout */ + uint32_t tickstart = HAL_GetTick(); + + /* Wait for the FLASH Option Bytes change operation to complete by polling on OPT_BUSY flag to be reset */ + while(READ_BIT(FLASH->OPTSR_CUR, FLASH_OPTSR_OPT_BUSY) != 0U) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check option byte change error */ + if(READ_BIT(FLASH->OPTSR_CUR, FLASH_OPTSR_OPTCHANGEERR) != 0U) + { + /* Save the error code */ + pFlash.ErrorCode |= HAL_FLASH_ERROR_OB_CHANGE; + + /* Clear the OB error flag */ + FLASH->OPTCCR |= FLASH_OPTCCR_CLR_OPTCHANGEERR; + + return HAL_ERROR; + } + + /* If there is no error flag set */ + return HAL_OK; +} + +/** + * @brief Wait for a FLASH CRC computation to complete. + * @param Timeout maximum flash operation timeout + * @param Bank flash FLASH_BANK_1 or FLASH_BANK_2 + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout, uint32_t Bank) +{ + uint32_t bsyflag; + uint32_t tickstart = HAL_GetTick(); + + assert_param(IS_FLASH_BANK_EXCLUSIVE(Bank)); + + /* Select bsyflag depending on Bank */ + if(Bank == FLASH_BANK_1) + { + bsyflag = FLASH_FLAG_CRC_BUSY_BANK1; + } + else + { + bsyflag = FLASH_FLAG_CRC_BUSY_BANK2; + } + + /* Wait for the FLASH CRC computation to complete by polling on CRC_BUSY flag to be reset */ + while(__HAL_FLASH_GET_FLAG(bsyflag)) + { + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_TIMEOUT; + } + } + } + + /* Check FLASH CRC read error flag */ + if(Bank == FLASH_BANK_1) + { + if (__HAL_FLASH_GET_FLAG_BANK1(FLASH_FLAG_CRCRDERR_BANK1)) + { + /* Save the error code */ + pFlash.ErrorCode |= HAL_FLASH_ERROR_CRCRD_BANK1; + + /* Clear FLASH CRC read error pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_CRCRDERR_BANK1); + + return HAL_ERROR; + } + } +#if defined (DUAL_BANK) + else + { + if (__HAL_FLASH_GET_FLAG_BANK2(FLASH_FLAG_CRCRDERR_BANK2)) + { + /* Save the error code */ + pFlash.ErrorCode |= HAL_FLASH_ERROR_CRCRD_BANK2; + + /* Clear FLASH CRC read error pending bit */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_CRCRDERR_BANK2); + + return HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + /* If there is no error flag set */ + return HAL_OK; +} + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c new file mode 100644 index 0000000..fd4acec --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c @@ -0,0 +1,1860 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_flash_ex.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extension peripheral: + * + Extended programming operations functions + * + @verbatim + ============================================================================== + ##### Flash Extension features ##### + ============================================================================== + + [..] Comparing to other previous devices, the FLASH interface for STM32H7xx + devices contains the following additional features + + (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write + capability (RWW) + (+) Dual bank memory organization + (+) PCROP protection for all banks + (+) Global readout protection (RDP) + (+) Write protection + (+) Secure access only protection + (+) Bank / register swapping (when Dual-Bank) + (+) Cyclic Redundancy Check (CRC) + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory + of all STM32H7xx devices. It includes + (#) FLASH Memory Erase functions: + (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and + HAL_FLASH_Lock() functions + (++) Erase function: Sector erase, bank erase and dual-bank mass erase + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + + (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to: + (++) Set/Reset the write protection per bank + (++) Set the Read protection Level + (++) Set the BOR level + (++) Program the user Option Bytes + (++) PCROP protection configuration and control per bank + (++) Secure area configuration and control per bank + (++) Core Boot address configuration + (++) TCM / AXI shared RAM configuration + (++) CPU Frequency Boost configuration + + (#) FLASH Memory Lock and unlock per Bank: HAL_FLASHEx_Lock_Bank1(), HAL_FLASHEx_Unlock_Bank1(), + HAL_FLASHEx_Lock_Bank2() and HAL_FLASHEx_Unlock_Bank2() functions + + (#) FLASH CRC computation function: Use HAL_FLASHEx_ComputeCRC() to: + (++) Enable CRC feature + (++) Program the desired burst size + (++) Define the user Flash Area on which the CRC has be computed + (++) Perform the CRC computation + (++) Disable CRC feature + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH HAL Extension module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Constants + * @{ + */ +#define FLASH_TIMEOUT_VALUE 50000U /* 50 s */ + +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(uint32_t VoltageRange, uint32_t Banks); +static void FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks); +static void FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Bank); +static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector, uint32_t Bank); +static void FLASH_OB_RDPConfig(uint32_t RDPLevel); +static uint32_t FLASH_OB_GetRDP(void); +static void FLASH_OB_PCROPConfig(uint32_t PCROConfigRDP, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr, uint32_t Banks); +static void FLASH_OB_GetPCROP(uint32_t *PCROPConfig, uint32_t *PCROPStartAddr,uint32_t *PCROPEndAddr, uint32_t Bank); +static void FLASH_OB_BOR_LevelConfig(uint32_t Level); +static uint32_t FLASH_OB_GetBOR(void); +static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig); +static uint32_t FLASH_OB_GetUser(void); +static void FLASH_OB_BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1); +static void FLASH_OB_GetBootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1); +static void FLASH_OB_SecureAreaConfig(uint32_t SecureAreaConfig, uint32_t SecureAreaStartAddr, uint32_t SecureAreaEndAddr, uint32_t Banks); +static void FLASH_OB_GetSecureArea(uint32_t *SecureAreaConfig, uint32_t *SecureAreaStartAddr, uint32_t *SecureAreaEndAddr, uint32_t Bank); +static void FLASH_CRC_AddSector(uint32_t Sector, uint32_t Bank); +static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr, uint32_t Bank); + +#if defined (DUAL_CORE) +static void FLASH_OB_CM4BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1); +static void FLASH_OB_GetCM4BootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1); +#endif /*DUAL_CORE*/ + +#if defined (FLASH_OTPBL_LOCKBL) +static void FLASH_OB_OTP_LockConfig(uint32_t OTP_Block); +static uint32_t FLASH_OB_OTP_GetLock(void); +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +static void FLASH_OB_SharedRAM_Config(uint32_t SharedRamConfig); +static uint32_t FLASH_OB_SharedRAM_GetConfig(void); +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +static void FLASH_OB_CPUFreq_BoostConfig(uint32_t FreqBoost); +static uint32_t FLASH_OB_CPUFreq_GetBoost(void); +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extension FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors + * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @param[out] SectorError pointer to variable that contains the configuration + * information on faulty sector in case of error (0xFFFFFFFF means that all + * the sectors have been correctly erased) + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t sector_index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + assert_param(IS_FLASH_BANK(pEraseInit->Banks)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed on Bank1 */ + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } + } + +#if defined (DUAL_BANK) + /* Wait for last operation to be completed on Bank2 */ + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + if(status == HAL_OK) + { + if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(pEraseInit->VoltageRange, pEraseInit->Banks); + + /* Wait for last operation to be completed on Bank 1 */ + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } + /* if the erase operation is completed, disable the Bank1 BER Bit */ + FLASH->CR1 &= (~FLASH_CR_BER); + } +#if defined (DUAL_BANK) + /* Wait for last operation to be completed on Bank 2 */ + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } + /* if the erase operation is completed, disable the Bank2 BER Bit */ + FLASH->CR2 &= (~FLASH_CR_BER); + } +#endif /* DUAL_BANK */ + } + else + { + /*Initialization of SectorError variable*/ + *SectorError = 0xFFFFFFFFU; + + /* Erase by sector by sector to be done*/ + for(sector_index = pEraseInit->Sector; sector_index < (pEraseInit->NbSectors + pEraseInit->Sector); sector_index++) + { + FLASH_Erase_Sector(sector_index, pEraseInit->Banks, pEraseInit->VoltageRange); + + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1); + + /* If the erase operation is completed, disable the SER Bit */ + FLASH->CR1 &= (~(FLASH_CR_SER | FLASH_CR_SNB)); + } +#if defined (DUAL_BANK) + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2); + + /* If the erase operation is completed, disable the SER Bit */ + FLASH->CR2 &= (~(FLASH_CR_SER | FLASH_CR_SNB)); + } +#endif /* DUAL_BANK */ + + if(status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty sector */ + *SectorError = sector_index; + break; + } + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled + * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); + assert_param(IS_FLASH_BANK(pEraseInit->Banks)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed on Bank 1 */ + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } + } + +#if defined (DUAL_BANK) + /* Wait for last operation to be completed on Bank 2 */ + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* DUAL_BANK */ + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + if((pEraseInit->Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Enable End of Operation and Error interrupts for Bank 1 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1 | FLASH_IT_OPERR_BANK1); +#else + __HAL_FLASH_ENABLE_IT_BANK1(FLASH_IT_EOP_BANK1 | FLASH_IT_WRPERR_BANK1 | FLASH_IT_PGSERR_BANK1 | \ + FLASH_IT_STRBERR_BANK1 | FLASH_IT_INCERR_BANK1); +#endif /* FLASH_CR_OPERRIE */ + } +#if defined (DUAL_BANK) + if((pEraseInit->Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Enable End of Operation and Error interrupts for Bank 2 */ +#if defined (FLASH_CR_OPERRIE) + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2 | FLASH_IT_OPERR_BANK2); +#else + __HAL_FLASH_ENABLE_IT_BANK2(FLASH_IT_EOP_BANK2 | FLASH_IT_WRPERR_BANK2 | FLASH_IT_PGSERR_BANK2 | \ + FLASH_IT_STRBERR_BANK2 | FLASH_IT_INCERR_BANK2); +#endif /* FLASH_CR_OPERRIE */ + } +#endif /* DUAL_BANK */ + + if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /*Mass erase to be done*/ + if(pEraseInit->Banks == FLASH_BANK_1) + { + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE_BANK1; + } +#if defined (DUAL_BANK) + else if(pEraseInit->Banks == FLASH_BANK_2) + { + pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE_BANK2; + } +#endif /* DUAL_BANK */ + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_ALLBANK_MASSERASE; + } + + FLASH_MassErase(pEraseInit->VoltageRange, pEraseInit->Banks); + } + else + { + /* Erase by sector to be done */ +#if defined (DUAL_BANK) + if(pEraseInit->Banks == FLASH_BANK_1) + { + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE_BANK1; + } + else + { + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE_BANK2; + } +#else + pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE_BANK1; +#endif /* DUAL_BANK */ + + pFlash.NbSectorsToErase = pEraseInit->NbSectors; + pFlash.Sector = pEraseInit->Sector; + pFlash.VoltageForErase = pEraseInit->VoltageRange; + + /* Erase first sector and wait for IT */ + FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->Banks, pEraseInit->VoltageRange); + } + } + + return status; +} + +/** + * @brief Program option bytes + * @param pOBInit pointer to an FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset Error Code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Wait for last operation to be completed */ + if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1) != HAL_OK) + { + status = HAL_ERROR; + } +#if defined (DUAL_BANK) + else if(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2) != HAL_OK) + { + status = HAL_ERROR; + } +#endif /* DUAL_BANK */ + else + { + status = HAL_OK; + } + + if(status == HAL_OK) + { + /*Write protection configuration*/ + if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) + { + assert_param(IS_WRPSTATE(pOBInit->WRPState)); + + if(pOBInit->WRPState == OB_WRPSTATE_ENABLE) + { + /*Enable of Write protection on the selected Sector*/ + FLASH_OB_EnableWRP(pOBInit->WRPSector,pOBInit->Banks); + } + else + { + /*Disable of Write protection on the selected Sector*/ + FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks); + } + } + + /* Read protection configuration */ + if((pOBInit->OptionType & OPTIONBYTE_RDP) != 0U) + { + /* Configure the Read protection level */ + FLASH_OB_RDPConfig(pOBInit->RDPLevel); + } + + /* User Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_USER) != 0U) + { + /* Configure the user option bytes */ + FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig); + } + + /* PCROP Configuration */ + if((pOBInit->OptionType & OPTIONBYTE_PCROP) != 0U) + { + assert_param(IS_FLASH_BANK(pOBInit->Banks)); + + /*Configure the Proprietary code readout protection */ + FLASH_OB_PCROPConfig(pOBInit->PCROPConfig, pOBInit->PCROPStartAddr, pOBInit->PCROPEndAddr, pOBInit->Banks); + } + + /* BOR Level configuration */ + if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR) + { + FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel); + } + +#if defined(DUAL_CORE) + /* CM7 Boot Address configuration */ + if((pOBInit->OptionType & OPTIONBYTE_CM7_BOOTADD) == OPTIONBYTE_CM7_BOOTADD) + { + FLASH_OB_BootAddConfig(pOBInit->BootConfig, pOBInit->BootAddr0, pOBInit->BootAddr1); + } + + /* CM4 Boot Address configuration */ + if((pOBInit->OptionType & OPTIONBYTE_CM4_BOOTADD) == OPTIONBYTE_CM4_BOOTADD) + { + FLASH_OB_CM4BootAddConfig(pOBInit->CM4BootConfig, pOBInit->CM4BootAddr0, pOBInit->CM4BootAddr1); + } +#else /* Single Core*/ + /* Boot Address configuration */ + if((pOBInit->OptionType & OPTIONBYTE_BOOTADD) == OPTIONBYTE_BOOTADD) + { + FLASH_OB_BootAddConfig(pOBInit->BootConfig, pOBInit->BootAddr0, pOBInit->BootAddr1); + } +#endif /*DUAL_CORE*/ + + /* Secure area configuration */ + if((pOBInit->OptionType & OPTIONBYTE_SECURE_AREA) == OPTIONBYTE_SECURE_AREA) + { + FLASH_OB_SecureAreaConfig(pOBInit->SecureAreaConfig, pOBInit->SecureAreaStartAddr, pOBInit->SecureAreaEndAddr,pOBInit->Banks); + } + +#if defined(FLASH_OTPBL_LOCKBL) + /* OTP Block Lock configuration */ + if((pOBInit->OptionType & OPTIONBYTE_OTP_LOCK) == OPTIONBYTE_OTP_LOCK) + { + FLASH_OB_OTP_LockConfig(pOBInit->OTPBlockLock); + } +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined(FLASH_OPTSR2_TCM_AXI_SHARED) + /* TCM / AXI Shared RAM configuration */ + if((pOBInit->OptionType & OPTIONBYTE_SHARED_RAM) == OPTIONBYTE_SHARED_RAM) + { + FLASH_OB_SharedRAM_Config(pOBInit->SharedRamConfig); + } +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined(FLASH_OPTSR2_CPUFREQ_BOOST) + /* CPU Frequency Boost configuration */ + if((pOBInit->OptionType & OPTIONBYTE_FREQ_BOOST) == OPTIONBYTE_FREQ_BOOST) + { + FLASH_OB_CPUFreq_BoostConfig(pOBInit->FreqBoostState); + } +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + +/** + * @brief Get the Option byte configuration + * @param pOBInit pointer to an FLASH_OBProgramInitTypeDef structure that + * contains the configuration information for the programming. + * @note The parameter Banks of the pOBInit structure must be set exclusively to FLASH_BANK_1 or FLASH_BANK_2, + * as this parameter is use to get the given Bank WRP, PCROP and secured area configuration. + * + * @retval None + */ +void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) +{ + pOBInit->OptionType = (OPTIONBYTE_USER | OPTIONBYTE_RDP | OPTIONBYTE_BOR); + + /* Get Read protection level */ + pOBInit->RDPLevel = FLASH_OB_GetRDP(); + + /* Get the user option bytes */ + pOBInit->USERConfig = FLASH_OB_GetUser(); + + /*Get BOR Level*/ + pOBInit->BORLevel = FLASH_OB_GetBOR(); + +#if defined (DUAL_BANK) + if ((pOBInit->Banks == FLASH_BANK_1) || (pOBInit->Banks == FLASH_BANK_2)) +#else + if (pOBInit->Banks == FLASH_BANK_1) +#endif /* DUAL_BANK */ + { + pOBInit->OptionType |= (OPTIONBYTE_WRP | OPTIONBYTE_PCROP | OPTIONBYTE_SECURE_AREA); + + /* Get write protection on the selected area */ + FLASH_OB_GetWRP(&(pOBInit->WRPState), &(pOBInit->WRPSector), pOBInit->Banks); + + /* Get the Proprietary code readout protection */ + FLASH_OB_GetPCROP(&(pOBInit->PCROPConfig), &(pOBInit->PCROPStartAddr), &(pOBInit->PCROPEndAddr), pOBInit->Banks); + + /*Get Bank Secure area*/ + FLASH_OB_GetSecureArea(&(pOBInit->SecureAreaConfig), &(pOBInit->SecureAreaStartAddr), &(pOBInit->SecureAreaEndAddr), pOBInit->Banks); + } + + /*Get Boot Address*/ + FLASH_OB_GetBootAdd(&(pOBInit->BootAddr0), &(pOBInit->BootAddr1)); +#if defined(DUAL_CORE) + pOBInit->OptionType |= OPTIONBYTE_CM7_BOOTADD | OPTIONBYTE_CM4_BOOTADD; + + /*Get CM4 Boot Address*/ + FLASH_OB_GetCM4BootAdd(&(pOBInit->CM4BootAddr0), &(pOBInit->CM4BootAddr1)); +#else + pOBInit->OptionType |= OPTIONBYTE_BOOTADD; +#endif /*DUAL_CORE*/ + +#if defined (FLASH_OTPBL_LOCKBL) + pOBInit->OptionType |= OPTIONBYTE_OTP_LOCK; + + /* Get OTP Block Lock */ + pOBInit->OTPBlockLock = FLASH_OB_OTP_GetLock(); +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) + pOBInit->OptionType |= OPTIONBYTE_SHARED_RAM; + + /* Get TCM / AXI Shared RAM */ + pOBInit->SharedRamConfig = FLASH_OB_SharedRAM_GetConfig(); +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) + pOBInit->OptionType |= OPTIONBYTE_FREQ_BOOST; + + /* Get CPU Frequency Boost */ + pOBInit->FreqBoostState = FLASH_OB_CPUFreq_GetBoost(); +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ +} + +/** + * @brief Unlock the FLASH Bank1 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank1(void) +{ + if(READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank1 Registers access */ + WRITE_REG(FLASH->KEYR1, FLASH_KEY1); + WRITE_REG(FLASH->KEYR1, FLASH_KEY2); + + /* Verify Flash Bank1 is unlocked */ + if (READ_BIT(FLASH->CR1, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Locks the FLASH Bank1 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank1(void) +{ + /* Set the LOCK Bit to lock the FLASH Bank1 Registers access */ + SET_BIT(FLASH->CR1, FLASH_CR_LOCK); + return HAL_OK; +} + +#if defined (DUAL_BANK) +/** + * @brief Unlock the FLASH Bank2 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Unlock_Bank2(void) +{ + if(READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + /* Authorize the FLASH Bank2 Registers access */ + WRITE_REG(FLASH->KEYR2, FLASH_KEY1); + WRITE_REG(FLASH->KEYR2, FLASH_KEY2); + + /* Verify Flash Bank1 is unlocked */ + if (READ_BIT(FLASH->CR2, FLASH_CR_LOCK) != 0U) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Locks the FLASH Bank2 control registers access + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Lock_Bank2(void) +{ + /* Set the LOCK Bit to lock the FLASH Bank2 Registers access */ + SET_BIT(FLASH->CR2, FLASH_CR_LOCK); + return HAL_OK; +} +#endif /* DUAL_BANK */ + +/* + * @brief Perform a CRC computation on the specified FLASH memory area + * @param pCRCInit pointer to an FLASH_CRCInitTypeDef structure that + * contains the configuration information for the CRC computation. + * @note CRC computation uses CRC-32 (Ethernet) polynomial 0x4C11DB7 + * @note The application should avoid running a CRC on PCROP or secure-only + * user Flash memory area since it may alter the expected CRC value. + * A special error flag (CRC read error: CRCRDERR) can be used to + * detect such a case. + * @retval HAL Status +*/ +HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result) +{ + HAL_StatusTypeDef status; + uint32_t sector_index; + + /* Check the parameters */ + assert_param(IS_FLASH_BANK_EXCLUSIVE(pCRCInit->Bank)); + assert_param(IS_FLASH_TYPECRC(pCRCInit->TypeCRC)); + + /* Wait for OB change operation to be completed */ + status = FLASH_OB_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (pCRCInit->Bank == FLASH_BANK_1) + { + /* Enable CRC feature */ + FLASH->CR1 |= FLASH_CR_CRC_EN; + + /* Clear CRC flags in Status Register: CRC end of calculation and CRC read error */ + FLASH->CCR1 |= (FLASH_CCR_CLR_CRCEND | FLASH_CCR_CLR_CRCRDERR); + + /* Clear current CRC result, program burst size and define memory area on which CRC has to be computed */ + FLASH->CRCCR1 |= FLASH_CRCCR_CLEAN_CRC | pCRCInit->BurstSize | pCRCInit->TypeCRC; + + if (pCRCInit->TypeCRC == FLASH_CRC_SECTORS) + { + /* Clear sectors list */ + FLASH->CRCCR1 |= FLASH_CRCCR_CLEAN_SECT; + + /* Select CRC sectors */ + for(sector_index = pCRCInit->Sector; sector_index < (pCRCInit->NbSectors + pCRCInit->Sector); sector_index++) + { + FLASH_CRC_AddSector(sector_index, FLASH_BANK_1); + } + } + else if (pCRCInit->TypeCRC == FLASH_CRC_BANK) + { + /* Enable Bank 1 CRC select bit */ + FLASH->CRCCR1 |= FLASH_CRCCR_ALL_BANK; + } + else + { + /* Select CRC start and end addresses */ + FLASH_CRC_SelectAddress(pCRCInit->CRCStartAddr, pCRCInit->CRCEndAddr, FLASH_BANK_1); + } + + /* Start the CRC calculation */ + FLASH->CRCCR1 |= FLASH_CRCCR_START_CRC; + + /* Wait on CRC busy flag */ + status = FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_1); + + /* Return CRC result */ + (*CRC_Result) = FLASH->CRCDATA; + + /* Disable CRC feature */ + FLASH->CR1 &= (~FLASH_CR_CRC_EN); + + /* Clear CRC flags */ + __HAL_FLASH_CLEAR_FLAG_BANK1(FLASH_FLAG_CRCEND_BANK1 | FLASH_FLAG_CRCRDERR_BANK1); + } +#if defined (DUAL_BANK) + else + { + /* Enable CRC feature */ + FLASH->CR2 |= FLASH_CR_CRC_EN; + + /* Clear CRC flags in Status Register: CRC end of calculation and CRC read error */ + FLASH->CCR2 |= (FLASH_CCR_CLR_CRCEND | FLASH_CCR_CLR_CRCRDERR); + + /* Clear current CRC result, program burst size and define memory area on which CRC has to be computed */ + FLASH->CRCCR2 |= FLASH_CRCCR_CLEAN_CRC | pCRCInit->BurstSize | pCRCInit->TypeCRC; + + if (pCRCInit->TypeCRC == FLASH_CRC_SECTORS) + { + /* Clear sectors list */ + FLASH->CRCCR2 |= FLASH_CRCCR_CLEAN_SECT; + + /* Add CRC sectors */ + for(sector_index = pCRCInit->Sector; sector_index < (pCRCInit->NbSectors + pCRCInit->Sector); sector_index++) + { + FLASH_CRC_AddSector(sector_index, FLASH_BANK_2); + } + } + else if (pCRCInit->TypeCRC == FLASH_CRC_BANK) + { + /* Enable Bank 2 CRC select bit */ + FLASH->CRCCR2 |= FLASH_CRCCR_ALL_BANK; + } + else + { + /* Select CRC start and end addresses */ + FLASH_CRC_SelectAddress(pCRCInit->CRCStartAddr, pCRCInit->CRCEndAddr, FLASH_BANK_2); + } + + /* Start the CRC calculation */ + FLASH->CRCCR2 |= FLASH_CRCCR_START_CRC; + + /* Wait on CRC busy flag */ + status = FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE, FLASH_BANK_2); + + /* Return CRC result */ + (*CRC_Result) = FLASH->CRCDATA; + + /* Disable CRC feature */ + FLASH->CR2 &= (~FLASH_CR_CRC_EN); + + /* Clear CRC flags */ + __HAL_FLASH_CLEAR_FLAG_BANK2(FLASH_FLAG_CRCEND_BANK2 | FLASH_FLAG_CRCRDERR_BANK2); + } +#endif /* DUAL_BANK */ + } + + return status; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory + * @param VoltageRange The device program/erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1 : Flash program/erase by 8 bits + * @arg FLASH_VOLTAGE_RANGE_2 : Flash program/erase by 16 bits + * @arg FLASH_VOLTAGE_RANGE_3 : Flash program/erase by 32 bits + * @arg FLASH_VOLTAGE_RANGE_4 : Flash program/erase by 64 bits + * + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * + * @retval HAL Status + */ +static void FLASH_MassErase(uint32_t VoltageRange, uint32_t Banks) +{ + /* Check the parameters */ +#if defined (FLASH_CR_PSIZE) + assert_param(IS_VOLTAGERANGE(VoltageRange)); +#else + UNUSED(VoltageRange); +#endif /* FLASH_CR_PSIZE */ + assert_param(IS_FLASH_BANK(Banks)); + +#if defined (DUAL_BANK) + /* Flash Mass Erase */ + if((Banks & FLASH_BANK_BOTH) == FLASH_BANK_BOTH) + { +#if defined (FLASH_CR_PSIZE) + /* Reset Program/erase VoltageRange for Bank1 and Bank2 */ + FLASH->CR1 &= (~FLASH_CR_PSIZE); + FLASH->CR2 &= (~FLASH_CR_PSIZE); + + /* Set voltage range */ + FLASH->CR1 |= VoltageRange; + FLASH->CR2 |= VoltageRange; +#endif /* FLASH_CR_PSIZE */ + + /* Set Mass Erase Bit */ + FLASH->OPTCR |= FLASH_OPTCR_MER; + } + else +#endif /* DUAL_BANK */ + { + /* Proceed to erase Flash Bank */ + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { +#if defined (FLASH_CR_PSIZE) + /* Set Program/erase VoltageRange for Bank1 */ + FLASH->CR1 &= (~FLASH_CR_PSIZE); + FLASH->CR1 |= VoltageRange; +#endif /* FLASH_CR_PSIZE */ + + /* Erase Bank1 */ + FLASH->CR1 |= (FLASH_CR_BER | FLASH_CR_START); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { +#if defined (FLASH_CR_PSIZE) + /* Set Program/erase VoltageRange for Bank2 */ + FLASH->CR2 &= (~FLASH_CR_PSIZE); + FLASH->CR2 |= VoltageRange; +#endif /* FLASH_CR_PSIZE */ + + /* Erase Bank2 */ + FLASH->CR2 |= (FLASH_CR_BER | FLASH_CR_START); + } +#endif /* DUAL_BANK */ + } +} + +/** + * @brief Erase the specified FLASH memory sector + * @param Sector FLASH sector to erase + * This parameter can be a value of @ref FLASH_Sectors + * @param Banks Banks to be erased + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Bank1 to be erased + * @arg FLASH_BANK_2: Bank2 to be erased + * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased + * @param VoltageRange The device program/erase parallelism. + * This parameter can be one of the following values: + * @arg FLASH_VOLTAGE_RANGE_1 : Flash program/erase by 8 bits + * @arg FLASH_VOLTAGE_RANGE_2 : Flash program/erase by 16 bits + * @arg FLASH_VOLTAGE_RANGE_3 : Flash program/erase by 32 bits + * @arg FLASH_VOLTAGE_RANGE_4 : Flash program/erase by 64 bits + * + * @retval None + */ +void FLASH_Erase_Sector(uint32_t Sector, uint32_t Banks, uint32_t VoltageRange) +{ + assert_param(IS_FLASH_SECTOR(Sector)); + assert_param(IS_FLASH_BANK_EXCLUSIVE(Banks)); +#if defined (FLASH_CR_PSIZE) + assert_param(IS_VOLTAGERANGE(VoltageRange)); +#else + UNUSED(VoltageRange); +#endif /* FLASH_CR_PSIZE */ + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { +#if defined (FLASH_CR_PSIZE) + /* Reset Program/erase VoltageRange and Sector Number for Bank1 */ + FLASH->CR1 &= ~(FLASH_CR_PSIZE | FLASH_CR_SNB); + + FLASH->CR1 |= (FLASH_CR_SER | VoltageRange | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#else + /* Reset Sector Number for Bank1 */ + FLASH->CR1 &= ~(FLASH_CR_SNB); + + FLASH->CR1 |= (FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#endif /* FLASH_CR_PSIZE */ + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { +#if defined (FLASH_CR_PSIZE) + /* Reset Program/erase VoltageRange and Sector Number for Bank2 */ + FLASH->CR2 &= ~(FLASH_CR_PSIZE | FLASH_CR_SNB); + + FLASH->CR2 |= (FLASH_CR_SER | VoltageRange | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#else + /* Reset Sector Number for Bank2 */ + FLASH->CR2 &= ~(FLASH_CR_SNB); + + FLASH->CR2 |= (FLASH_CR_SER | (Sector << FLASH_CR_SNB_Pos) | FLASH_CR_START); +#endif /* FLASH_CR_PSIZE */ + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Enable the write protection of the desired bank1 or bank 2 sectors + * @param WRPSector specifies the sector(s) to be write protected. + * This parameter can be one of the following values: + * @arg WRPSector: A combination of OB_WRP_SECTOR_0 to OB_WRP_SECTOR_7 or OB_WRP_SECTOR_ALL + * + * @param Banks the specific bank to apply WRP sectors + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: enable WRP on specified bank1 sectors + * @arg FLASH_BANK_2: enable WRP on specified bank2 sectors + * @arg FLASH_BANK_BOTH: enable WRP on both bank1 and bank2 specified sectors + * + * @retval HAL FLASH State + */ +static void FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Enable Write Protection for bank 1 */ + FLASH->WPSN_PRG1 &= (~(WRPSector & FLASH_WPSN_WRPSN)); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Enable Write Protection for bank 2 */ + FLASH->WPSN_PRG2 &= (~(WRPSector & FLASH_WPSN_WRPSN)); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Disable the write protection of the desired bank1 or bank 2 sectors + * @param WRPSector specifies the sector(s) to disable write protection. + * This parameter can be one of the following values: + * @arg WRPSector: A combination of FLASH_OB_WRP_SECTOR_0 to FLASH_OB_WRP_SECTOR_7 or FLASH_OB_WRP_SECTOR_ALL + * + * @param Banks the specific bank to apply WRP sectors + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: disable WRP on specified bank1 sectors + * @arg FLASH_BANK_2: disable WRP on specified bank2 sectors + * @arg FLASH_BANK_BOTH: disable WRP on both bank1 and bank2 specified sectors + * + * @retval HAL FLASH State + */ +static void FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_OB_WRP_SECTOR(WRPSector)); + assert_param(IS_FLASH_BANK(Banks)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Disable Write Protection for bank 1 */ + FLASH->WPSN_PRG1 |= (WRPSector & FLASH_WPSN_WRPSN); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Disable Write Protection for bank 2 */ + FLASH->WPSN_PRG2 |= (WRPSector & FLASH_WPSN_WRPSN); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Get the write protection of the given bank 1 or bank 2 sectors + * @param WRPState gives the write protection state on the given bank. + * This parameter can be one of the following values: + * @arg WRPState: OB_WRPSTATE_DISABLE or OB_WRPSTATE_ENABLE + + * @param WRPSector gives the write protected sector(s) on the given bank . + * This parameter can be one of the following values: + * @arg WRPSector: A combination of FLASH_OB_WRP_SECTOR_0 to FLASH_OB_WRP_SECTOR_7 or FLASH_OB_WRP_SECTOR_ALL + * + * @param Bank the specific bank to apply WRP sectors + * This parameter can be exclusively one of the following values: + * @arg FLASH_BANK_1: Get bank1 WRP sectors + * @arg FLASH_BANK_2: Get bank2 WRP sectors + * @arg FLASH_BANK_BOTH: note allowed in this functions + * + * @retval HAL FLASH State + */ +static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector, uint32_t Bank) +{ + uint32_t regvalue = 0U; + + if(Bank == FLASH_BANK_1) + { + regvalue = FLASH->WPSN_CUR1; + } + +#if defined (DUAL_BANK) + if(Bank == FLASH_BANK_2) + { + regvalue = FLASH->WPSN_CUR2; + } +#endif /* DUAL_BANK */ + + (*WRPSector) = (~regvalue) & FLASH_WPSN_WRPSN; + + if(*WRPSector == 0U) + { + (*WRPState) = OB_WRPSTATE_DISABLE; + } + else + { + (*WRPState) = OB_WRPSTATE_ENABLE; + } +} + +/** + * @brief Set the read protection level. + * + * @note To configure the RDP level, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the RDP level, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * @note !!! Warning : When enabling OB_RDP level 2 it's no more possible + * to go back to level 1 or 0 !!! + * + * @param RDPLevel specifies the read protection level. + * This parameter can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + * + * @retval HAL status + */ +static void FLASH_OB_RDPConfig(uint32_t RDPLevel) +{ + /* Check the parameters */ + assert_param(IS_OB_RDP_LEVEL(RDPLevel)); + + /* Configure the RDP level in the option bytes register */ + MODIFY_REG(FLASH->OPTSR_PRG, FLASH_OPTSR_RDP, RDPLevel); +} + +/** + * @brief Get the read protection level. + * @retval RDPLevel specifies the read protection level. + * This return value can be one of the following values: + * @arg OB_RDP_LEVEL_0: No protection + * @arg OB_RDP_LEVEL_1: Read protection of the memory + * @arg OB_RDP_LEVEL_2: Full chip protection + */ +static uint32_t FLASH_OB_GetRDP(void) +{ + uint32_t rdp_level = READ_BIT(FLASH->OPTSR_CUR, FLASH_OPTSR_RDP); + + if ((rdp_level != OB_RDP_LEVEL_0) && (rdp_level != OB_RDP_LEVEL_2)) + { + return (OB_RDP_LEVEL_1); + } + else + { + return rdp_level; + } +} + +#if defined(DUAL_CORE) +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @note To validate the user option bytes, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param UserType The FLASH User Option Bytes to be modified : + * a combination of @ref FLASHEx_OB_USER_Type + * + * @param UserConfig The FLASH User Option Bytes values: + * IWDG1_SW(Bit4), IWDG2_SW(Bit 5), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), BCM4(Bit 22), BCM7(Bit 23), nRST_STOP_D2(Bit 24), + * nRST_STDY_D2(Bit 25), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + * + * @retval HAL status + */ +#else +/** + * @brief Program the FLASH User Option Byte. + * + * @note To configure the user option bytes, the option lock bit OPTLOCK must + * be cleared with the call of the HAL_FLASH_OB_Unlock() function. + * + * @note To validate the user option bytes, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param UserType The FLASH User Option Bytes to be modified : + * a combination of @arg FLASHEx_OB_USER_Type + * + * @param UserConfig The FLASH User Option Bytes values: + * IWDG_SW(Bit4), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + * + * @retval HAL status + */ +#endif /*DUAL_CORE*/ +static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig) +{ + uint32_t optr_reg_val = 0; + uint32_t optr_reg_mask = 0; + + /* Check the parameters */ + assert_param(IS_OB_USER_TYPE(UserType)); + + if((UserType & OB_USER_IWDG1_SW) != 0U) + { + /* IWDG_HW option byte should be modified */ + assert_param(IS_OB_IWDG1_SOURCE(UserConfig & FLASH_OPTSR_IWDG1_SW)); + + /* Set value and mask for IWDG_HW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_IWDG1_SW); + optr_reg_mask |= FLASH_OPTSR_IWDG1_SW; + } +#if defined(DUAL_CORE) + if((UserType & OB_USER_IWDG2_SW) != 0U) + { + /* IWDG2_SW option byte should be modified */ + assert_param(IS_OB_IWDG2_SOURCE(UserConfig & FLASH_OPTSR_IWDG2_SW)); + + /* Set value and mask for IWDG2_SW option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_IWDG2_SW); + optr_reg_mask |= FLASH_OPTSR_IWDG2_SW; + } +#endif /*DUAL_CORE*/ + if((UserType & OB_USER_NRST_STOP_D1) != 0U) + { + /* NRST_STOP option byte should be modified */ + assert_param(IS_OB_STOP_D1_RESET(UserConfig & FLASH_OPTSR_NRST_STOP_D1)); + + /* Set value and mask for NRST_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STOP_D1); + optr_reg_mask |= FLASH_OPTSR_NRST_STOP_D1; + } + + if((UserType & OB_USER_NRST_STDBY_D1) != 0U) + { + /* NRST_STDBY option byte should be modified */ + assert_param(IS_OB_STDBY_D1_RESET(UserConfig & FLASH_OPTSR_NRST_STBY_D1)); + + /* Set value and mask for NRST_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STBY_D1); + optr_reg_mask |= FLASH_OPTSR_NRST_STBY_D1; + } + + if((UserType & OB_USER_IWDG_STOP) != 0U) + { + /* IWDG_STOP option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STOP(UserConfig & FLASH_OPTSR_FZ_IWDG_STOP)); + + /* Set value and mask for IWDG_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_FZ_IWDG_STOP); + optr_reg_mask |= FLASH_OPTSR_FZ_IWDG_STOP; + } + + if((UserType & OB_USER_IWDG_STDBY) != 0U) + { + /* IWDG_STDBY option byte should be modified */ + assert_param(IS_OB_USER_IWDG_STDBY(UserConfig & FLASH_OPTSR_FZ_IWDG_SDBY)); + + /* Set value and mask for IWDG_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_FZ_IWDG_SDBY); + optr_reg_mask |= FLASH_OPTSR_FZ_IWDG_SDBY; + } + + if((UserType & OB_USER_ST_RAM_SIZE) != 0U) + { + /* ST_RAM_SIZE option byte should be modified */ + assert_param(IS_OB_USER_ST_RAM_SIZE(UserConfig & FLASH_OPTSR_ST_RAM_SIZE)); + + /* Set value and mask for ST_RAM_SIZE option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_ST_RAM_SIZE); + optr_reg_mask |= FLASH_OPTSR_ST_RAM_SIZE; + } + + if((UserType & OB_USER_SECURITY) != 0U) + { + /* SECURITY option byte should be modified */ + assert_param(IS_OB_USER_SECURITY(UserConfig & FLASH_OPTSR_SECURITY)); + + /* Set value and mask for SECURITY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_SECURITY); + optr_reg_mask |= FLASH_OPTSR_SECURITY; + } + +#if defined(DUAL_CORE) + if((UserType & OB_USER_BCM4) != 0U) + { + /* BCM4 option byte should be modified */ + assert_param(IS_OB_USER_BCM4(UserConfig & FLASH_OPTSR_BCM4)); + + /* Set value and mask for BCM4 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_BCM4); + optr_reg_mask |= FLASH_OPTSR_BCM4; + } + + if((UserType & OB_USER_BCM7) != 0U) + { + /* BCM7 option byte should be modified */ + assert_param(IS_OB_USER_BCM7(UserConfig & FLASH_OPTSR_BCM7)); + + /* Set value and mask for BCM7 option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_BCM7); + optr_reg_mask |= FLASH_OPTSR_BCM7; + } +#endif /* DUAL_CORE */ + +#if defined (FLASH_OPTSR_NRST_STOP_D2) + if((UserType & OB_USER_NRST_STOP_D2) != 0U) + { + /* NRST_STOP option byte should be modified */ + assert_param(IS_OB_STOP_D2_RESET(UserConfig & FLASH_OPTSR_NRST_STOP_D2)); + + /* Set value and mask for NRST_STOP option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STOP_D2); + optr_reg_mask |= FLASH_OPTSR_NRST_STOP_D2; + } + + if((UserType & OB_USER_NRST_STDBY_D2) != 0U) + { + /* NRST_STDBY option byte should be modified */ + assert_param(IS_OB_STDBY_D2_RESET(UserConfig & FLASH_OPTSR_NRST_STBY_D2)); + + /* Set value and mask for NRST_STDBY option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_NRST_STBY_D2); + optr_reg_mask |= FLASH_OPTSR_NRST_STBY_D2; + } +#endif /* FLASH_OPTSR_NRST_STOP_D2 */ + +#if defined (DUAL_BANK) + if((UserType & OB_USER_SWAP_BANK) != 0U) + { + /* SWAP_BANK_OPT option byte should be modified */ + assert_param(IS_OB_USER_SWAP_BANK(UserConfig & FLASH_OPTSR_SWAP_BANK_OPT)); + + /* Set value and mask for SWAP_BANK_OPT option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_SWAP_BANK_OPT); + optr_reg_mask |= FLASH_OPTSR_SWAP_BANK_OPT; + } +#endif /* DUAL_BANK */ + + if((UserType & OB_USER_IOHSLV) != 0U) + { + /* IOHSLV_OPT option byte should be modified */ + assert_param(IS_OB_USER_IOHSLV(UserConfig & FLASH_OPTSR_IO_HSLV)); + + /* Set value and mask for IOHSLV_OPT option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_IO_HSLV); + optr_reg_mask |= FLASH_OPTSR_IO_HSLV; + } + +#if defined (FLASH_OPTSR_VDDMMC_HSLV) + if((UserType & OB_USER_VDDMMC_HSLV) != 0U) + { + /* VDDMMC_HSLV option byte should be modified */ + assert_param(IS_OB_USER_VDDMMC_HSLV(UserConfig & FLASH_OPTSR_VDDMMC_HSLV)); + + /* Set value and mask for VDDMMC_HSLV option byte */ + optr_reg_val |= (UserConfig & FLASH_OPTSR_VDDMMC_HSLV); + optr_reg_mask |= FLASH_OPTSR_VDDMMC_HSLV; + } +#endif /* FLASH_OPTSR_VDDMMC_HSLV */ + + /* Configure the option bytes register */ + MODIFY_REG(FLASH->OPTSR_PRG, optr_reg_mask, optr_reg_val); +} + +#if defined(DUAL_CORE) +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values + * IWDG1_SW(Bit4), IWDG2_SW(Bit 5), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), BCM4(Bit 22), BCM7(Bit 23), nRST_STOP_D2(Bit 24), + * nRST_STDY_D2(Bit 25), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + */ +#else +/** + * @brief Return the FLASH User Option Byte value. + * @retval The FLASH User Option Bytes values + * IWDG_SW(Bit4), nRST_STOP_D1(Bit 6), nRST_STDY_D1(Bit 7), + * FZ_IWDG_STOP(Bit 17), FZ_IWDG_SDBY(Bit 18), ST_RAM_SIZE(Bit[19:20]), + * SECURITY(Bit 21), IO_HSLV (Bit 29) and SWAP_BANK_OPT(Bit 31). + */ +#endif /*DUAL_CORE*/ +static uint32_t FLASH_OB_GetUser(void) +{ + uint32_t userConfig = READ_REG(FLASH->OPTSR_CUR); + userConfig &= (~(FLASH_OPTSR_BOR_LEV | FLASH_OPTSR_RDP)); + + return userConfig; +} + +/** + * @brief Configure the Proprietary code readout protection of the desired addresses + * + * @note To configure the PCROP options, the option lock bit OPTLOCK must be + * cleared with the call of the HAL_FLASH_OB_Unlock() function. + * @note To validate the PCROP options, the option bytes must be reloaded + * through the call of the HAL_FLASH_OB_Launch() function. + * + * @param PCROPConfig specifies if the PCROP area for the given Bank shall be erased or not + * when RDP level decreased from Level 1 to Level 0, or after a bank erase with protection removal + * This parameter must be a value of @arg FLASHEx_OB_PCROP_RDP enumeration + * + * @param PCROPStartAddr specifies the start address of the Proprietary code readout protection + * This parameter can be an address between begin and end of the bank + * + * @param PCROPEndAddr specifies the end address of the Proprietary code readout protection + * This parameter can be an address between PCROPStartAddr and end of the bank + * + * @param Banks the specific bank to apply PCROP protection + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: PCROP on specified bank1 area + * @arg FLASH_BANK_2: PCROP on specified bank2 area + * @arg FLASH_BANK_BOTH: PCROP on specified bank1 and bank2 area (same config will be applied on both banks) + * + * @retval None + */ +static void FLASH_OB_PCROPConfig(uint32_t PCROPConfig, uint32_t PCROPStartAddr, uint32_t PCROPEndAddr, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_OB_PCROP_RDP(PCROPConfig)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(PCROPStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(PCROPEndAddr)); + + /* Configure the Proprietary code readout protection */ + FLASH->PRAR_PRG1 = ((PCROPStartAddr - FLASH_BANK1_BASE) >> 8) | \ + (((PCROPEndAddr - FLASH_BANK1_BASE) >> 8) << FLASH_PRAR_PROT_AREA_END_Pos) | \ + PCROPConfig; + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(PCROPStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(PCROPEndAddr)); + + /* Configure the Proprietary code readout protection */ + FLASH->PRAR_PRG2 = ((PCROPStartAddr - FLASH_BANK2_BASE) >> 8) | \ + (((PCROPEndAddr - FLASH_BANK2_BASE) >> 8) << FLASH_PRAR_PROT_AREA_END_Pos) | \ + PCROPConfig; + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Get the Proprietary code readout protection configuration on a given Bank + * + * @param PCROPConfig indicates if the PCROP area for the given Bank shall be erased or not + * when RDP level decreased from Level 1 to Level 0 or after a bank erase with protection removal + * + * @param PCROPStartAddr gives the start address of the Proprietary code readout protection of the bank + * + * @param PCROPEndAddr gives the end address of the Proprietary code readout protection of the bank + * + * @param Bank the specific bank to apply PCROP protection + * This parameter can be exclusively one of the following values: + * @arg FLASH_BANK_1: PCROP on specified bank1 area + * @arg FLASH_BANK_2: PCROP on specified bank2 area + * @arg FLASH_BANK_BOTH: is not allowed here + * + * @retval None + */ +static void FLASH_OB_GetPCROP(uint32_t *PCROPConfig, uint32_t *PCROPStartAddr, uint32_t *PCROPEndAddr, uint32_t Bank) +{ + uint32_t regvalue = 0; + uint32_t bankBase = 0; + + if(Bank == FLASH_BANK_1) + { + regvalue = FLASH->PRAR_CUR1; + bankBase = FLASH_BANK1_BASE; + } + +#if defined (DUAL_BANK) + if(Bank == FLASH_BANK_2) + { + regvalue = FLASH->PRAR_CUR2; + bankBase = FLASH_BANK2_BASE; + } +#endif /* DUAL_BANK */ + + (*PCROPConfig) = (regvalue & FLASH_PRAR_DMEP); + + (*PCROPStartAddr) = ((regvalue & FLASH_PRAR_PROT_AREA_START) << 8) + bankBase; + (*PCROPEndAddr) = (regvalue & FLASH_PRAR_PROT_AREA_END) >> FLASH_PRAR_PROT_AREA_END_Pos; + (*PCROPEndAddr) = ((*PCROPEndAddr) << 8) + bankBase; +} + +/** + * @brief Set the BOR Level. + * @param Level specifies the Option Bytes BOR Reset Level. + * This parameter can be one of the following values: + * @arg OB_BOR_LEVEL0: Reset level threshold is set to 1.6V + * @arg OB_BOR_LEVEL1: Reset level threshold is set to 2.1V + * @arg OB_BOR_LEVEL2: Reset level threshold is set to 2.4V + * @arg OB_BOR_LEVEL3: Reset level threshold is set to 2.7V + * @retval None + */ +static void FLASH_OB_BOR_LevelConfig(uint32_t Level) +{ + assert_param(IS_OB_BOR_LEVEL(Level)); + + /* Configure BOR_LEV option byte */ + MODIFY_REG(FLASH->OPTSR_PRG, FLASH_OPTSR_BOR_LEV, Level); +} + +/** + * @brief Get the BOR Level. + * @retval The Option Bytes BOR Reset Level. + * This parameter can be one of the following values: + * @arg OB_BOR_LEVEL0: Reset level threshold is set to 1.6V + * @arg OB_BOR_LEVEL1: Reset level threshold is set to 2.1V + * @arg OB_BOR_LEVEL2: Reset level threshold is set to 2.4V + * @arg OB_BOR_LEVEL3: Reset level threshold is set to 2.7V + */ +static uint32_t FLASH_OB_GetBOR(void) +{ + return (FLASH->OPTSR_CUR & FLASH_OPTSR_BOR_LEV); +} + +/** + * @brief Set Boot address + * @param BootOption Boot address option byte to be programmed, + * This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION + (OB_BOOT_ADD0, OB_BOOT_ADD1 or OB_BOOT_ADD_BOTH) + * + * @param BootAddress0 Specifies the Boot Address 0 + * @param BootAddress1 Specifies the Boot Address 1 + * @retval HAL Status + */ +static void FLASH_OB_BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1) +{ + /* Check the parameters */ + assert_param(IS_OB_BOOT_ADD_OPTION(BootOption)); + + if((BootOption & OB_BOOT_ADD0) == OB_BOOT_ADD0) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress0)); + + /* Configure CM7 BOOT ADD0 */ +#if defined(DUAL_CORE) + MODIFY_REG(FLASH->BOOT7_PRG, FLASH_BOOT7_BCM7_ADD0, (BootAddress0 >> 16)); +#else /* Single Core*/ + MODIFY_REG(FLASH->BOOT_PRG, FLASH_BOOT_ADD0, (BootAddress0 >> 16)); +#endif /* DUAL_CORE */ + } + + if((BootOption & OB_BOOT_ADD1) == OB_BOOT_ADD1) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress1)); + + /* Configure CM7 BOOT ADD1 */ +#if defined(DUAL_CORE) + MODIFY_REG(FLASH->BOOT7_PRG, FLASH_BOOT7_BCM7_ADD1, BootAddress1); +#else /* Single Core*/ + MODIFY_REG(FLASH->BOOT_PRG, FLASH_BOOT_ADD1, BootAddress1); +#endif /* DUAL_CORE */ + } +} + +/** + * @brief Get Boot address + * @param BootAddress0 Specifies the Boot Address 0. + * @param BootAddress1 Specifies the Boot Address 1. + * @retval HAL Status + */ +static void FLASH_OB_GetBootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1) +{ + uint32_t regvalue; + +#if defined(DUAL_CORE) + regvalue = FLASH->BOOT7_CUR; + + (*BootAddress0) = (regvalue & FLASH_BOOT7_BCM7_ADD0) << 16; + (*BootAddress1) = (regvalue & FLASH_BOOT7_BCM7_ADD1); +#else /* Single Core */ + regvalue = FLASH->BOOT_CUR; + + (*BootAddress0) = (regvalue & FLASH_BOOT_ADD0) << 16; + (*BootAddress1) = (regvalue & FLASH_BOOT_ADD1); +#endif /* DUAL_CORE */ +} + +#if defined(DUAL_CORE) +/** + * @brief Set CM4 Boot address + * @param BootOption Boot address option byte to be programmed, + * This parameter must be a value of @ref FLASHEx_OB_BOOT_OPTION + (OB_BOOT_ADD0, OB_BOOT_ADD1 or OB_BOOT_ADD_BOTH) + * + * @param BootAddress0 Specifies the CM4 Boot Address 0. + * @param BootAddress1 Specifies the CM4 Boot Address 1. + * @retval HAL Status + */ +static void FLASH_OB_CM4BootAddConfig(uint32_t BootOption, uint32_t BootAddress0, uint32_t BootAddress1) +{ + /* Check the parameters */ + assert_param(IS_OB_BOOT_ADD_OPTION(BootOption)); + + if((BootOption & OB_BOOT_ADD0) == OB_BOOT_ADD0) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress0)); + + /* Configure CM4 BOOT ADD0 */ + MODIFY_REG(FLASH->BOOT4_PRG, FLASH_BOOT4_BCM4_ADD0, (BootAddress0 >> 16)); + + } + + if((BootOption & OB_BOOT_ADD1) == OB_BOOT_ADD1) + { + /* Check the parameters */ + assert_param(IS_BOOT_ADDRESS(BootAddress1)); + + /* Configure CM4 BOOT ADD1 */ + MODIFY_REG(FLASH->BOOT4_PRG, FLASH_BOOT4_BCM4_ADD1, BootAddress1); + } +} + +/** + * @brief Get CM4 Boot address + * @param BootAddress0 Specifies the CM4 Boot Address 0. + * @param BootAddress1 Specifies the CM4 Boot Address 1. + * @retval HAL Status + */ +static void FLASH_OB_GetCM4BootAdd(uint32_t *BootAddress0, uint32_t *BootAddress1) +{ + uint32_t regvalue; + + regvalue = FLASH->BOOT4_CUR; + + (*BootAddress0) = (regvalue & FLASH_BOOT4_BCM4_ADD0) << 16; + (*BootAddress1) = (regvalue & FLASH_BOOT4_BCM4_ADD1); +} +#endif /*DUAL_CORE*/ + +/** + * @brief Set secure area configuration + * @param SecureAreaConfig specify if the secure area will be deleted or not + * when RDP level decreased from Level 1 to Level 0 or during a mass erase. + * + * @param SecureAreaStartAddr Specifies the secure area start address + * @param SecureAreaEndAddr Specifies the secure area end address + * @param Banks the specific bank to apply Security protection + * This parameter can be one of the following values: + * @arg FLASH_BANK_1: Secure area on specified bank1 area + * @arg FLASH_BANK_2: Secure area on specified bank2 area + * @arg FLASH_BANK_BOTH: Secure area on specified bank1 and bank2 area (same config will be applied on both banks) + * @retval None + */ +static void FLASH_OB_SecureAreaConfig(uint32_t SecureAreaConfig, uint32_t SecureAreaStartAddr, uint32_t SecureAreaEndAddr, uint32_t Banks) +{ + /* Check the parameters */ + assert_param(IS_FLASH_BANK(Banks)); + assert_param(IS_OB_SECURE_RDP(SecureAreaConfig)); + + if((Banks & FLASH_BANK_1) == FLASH_BANK_1) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(SecureAreaStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(SecureAreaEndAddr)); + + /* Configure the secure area */ + FLASH->SCAR_PRG1 = ((SecureAreaStartAddr - FLASH_BANK1_BASE) >> 8) | \ + (((SecureAreaEndAddr - FLASH_BANK1_BASE) >> 8) << FLASH_SCAR_SEC_AREA_END_Pos) | \ + (SecureAreaConfig & FLASH_SCAR_DMES); + } + +#if defined (DUAL_BANK) + if((Banks & FLASH_BANK_2) == FLASH_BANK_2) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(SecureAreaStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(SecureAreaEndAddr)); + + /* Configure the secure area */ + FLASH->SCAR_PRG2 = ((SecureAreaStartAddr - FLASH_BANK2_BASE) >> 8) | \ + (((SecureAreaEndAddr - FLASH_BANK2_BASE) >> 8) << FLASH_SCAR_SEC_AREA_END_Pos) | \ + (SecureAreaConfig & FLASH_SCAR_DMES); + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Get secure area configuration + * @param SecureAreaConfig indicates if the secure area will be deleted or not + * when RDP level decreased from Level 1 to Level 0 or during a mass erase. + * @param SecureAreaStartAddr gives the secure area start address + * @param SecureAreaEndAddr gives the secure area end address + * @param Bank Specifies the Bank + * @retval None + */ +static void FLASH_OB_GetSecureArea(uint32_t *SecureAreaConfig, uint32_t *SecureAreaStartAddr, uint32_t *SecureAreaEndAddr, uint32_t Bank) +{ + uint32_t regvalue = 0; + uint32_t bankBase = 0; + + /* Check Bank parameter value */ + if(Bank == FLASH_BANK_1) + { + regvalue = FLASH->SCAR_CUR1; + bankBase = FLASH_BANK1_BASE; + } + +#if defined (DUAL_BANK) + if(Bank == FLASH_BANK_2) + { + regvalue = FLASH->SCAR_CUR2; + bankBase = FLASH_BANK2_BASE; + } +#endif /* DUAL_BANK */ + + /* Get the secure area settings */ + (*SecureAreaConfig) = (regvalue & FLASH_SCAR_DMES); + (*SecureAreaStartAddr) = ((regvalue & FLASH_SCAR_SEC_AREA_START) << 8) + bankBase; + (*SecureAreaEndAddr) = (regvalue & FLASH_SCAR_SEC_AREA_END) >> FLASH_SCAR_SEC_AREA_END_Pos; + (*SecureAreaEndAddr) = ((*SecureAreaEndAddr) << 8) + bankBase; +} + +/** + * @brief Add a CRC sector to the list of sectors on which the CRC will be calculated + * @param Sector Specifies the CRC sector number + * @param Bank Specifies the Bank + * @retval None + */ +static void FLASH_CRC_AddSector(uint32_t Sector, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FLASH_SECTOR(Sector)); + + if (Bank == FLASH_BANK_1) + { + /* Clear CRC sector */ + FLASH->CRCCR1 &= (~FLASH_CRCCR_CRC_SECT); + + /* Select CRC Sector and activate ADD_SECT bit */ + FLASH->CRCCR1 |= Sector | FLASH_CRCCR_ADD_SECT; + } +#if defined (DUAL_BANK) + else + { + /* Clear CRC sector */ + FLASH->CRCCR2 &= (~FLASH_CRCCR_CRC_SECT); + + /* Select CRC Sector and activate ADD_SECT bit */ + FLASH->CRCCR2 |= Sector | FLASH_CRCCR_ADD_SECT; + } +#endif /* DUAL_BANK */ +} + +/** + * @brief Select CRC start and end memory addresses on which the CRC will be calculated + * @param CRCStartAddr Specifies the CRC start address + * @param CRCEndAddr Specifies the CRC end address + * @param Bank Specifies the Bank + * @retval None + */ +static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr, uint32_t Bank) +{ + if (Bank == FLASH_BANK_1) + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(CRCStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK1(CRCEndAddr)); + + /* Write CRC Start and End addresses */ + FLASH->CRCSADD1 = CRCStartAddr; + FLASH->CRCEADD1 = CRCEndAddr; + } +#if defined (DUAL_BANK) + else + { + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(CRCStartAddr)); + assert_param(IS_FLASH_PROGRAM_ADDRESS_BANK2(CRCEndAddr)); + + /* Write CRC Start and End addresses */ + FLASH->CRCSADD2 = CRCStartAddr; + FLASH->CRCEADD2 = CRCEndAddr; + } +#endif /* DUAL_BANK */ +} +/** + * @} + */ + +#if defined (FLASH_OTPBL_LOCKBL) +/** + * @brief Configure the OTP Block Lock. + * @param OTP_Block specifies the OTP Block to lock. + * This parameter can be a value of @ref FLASHEx_OTP_Blocks + * @retval None + */ +static void FLASH_OB_OTP_LockConfig(uint32_t OTP_Block) +{ + /* Check the parameters */ + assert_param(IS_OTP_BLOCK(OTP_Block)); + + /* Configure the OTP Block lock in the option bytes register */ + FLASH->OTPBL_PRG |= (OTP_Block & FLASH_OTPBL_LOCKBL); +} + +/** + * @brief Get the OTP Block Lock. + * @retval OTP_Block specifies the OTP Block to lock. + * This return value can be a value of @ref FLASHEx_OTP_Blocks + */ +static uint32_t FLASH_OB_OTP_GetLock(void) +{ + return (FLASH->OTPBL_CUR); +} +#endif /* FLASH_OTPBL_LOCKBL */ + +#if defined (FLASH_OPTSR2_TCM_AXI_SHARED) +/** + * @brief Configure the TCM / AXI Shared RAM. + * @param SharedRamConfig specifies the Shared RAM configuration. + * This parameter can be a value of @ref FLASHEx_OB_TCM_AXI_SHARED + * @retval None + */ +static void FLASH_OB_SharedRAM_Config(uint32_t SharedRamConfig) +{ + /* Check the parameters */ + assert_param(IS_OB_USER_TCM_AXI_SHARED(SharedRamConfig)); + + /* Configure the TCM / AXI Shared RAM in the option bytes register */ + MODIFY_REG(FLASH->OPTSR2_PRG, FLASH_OPTSR2_TCM_AXI_SHARED, SharedRamConfig); +} + +/** + * @brief Get the TCM / AXI Shared RAM configuration. + * @retval SharedRamConfig returns the TCM / AXI Shared RAM configuration. + * This return value can be a value of @ref FLASHEx_OB_TCM_AXI_SHARED + */ +static uint32_t FLASH_OB_SharedRAM_GetConfig(void) +{ + return (FLASH->OPTSR2_CUR & FLASH_OPTSR2_TCM_AXI_SHARED); +} +#endif /* FLASH_OPTSR2_TCM_AXI_SHARED */ + +#if defined (FLASH_OPTSR2_CPUFREQ_BOOST) +/** + * @brief Configure the CPU Frequency Boost. + * @param FreqBoost specifies the CPU Frequency Boost state. + * This parameter can be a value of @ref FLASHEx_OB_CPUFREQ_BOOST + * @retval None + */ +static void FLASH_OB_CPUFreq_BoostConfig(uint32_t FreqBoost) +{ + /* Check the parameters */ + assert_param(IS_OB_USER_CPUFREQ_BOOST(FreqBoost)); + + /* Configure the CPU Frequency Boost in the option bytes register */ + MODIFY_REG(FLASH->OPTSR2_PRG, FLASH_OPTSR2_CPUFREQ_BOOST, FreqBoost); +} + +/** + * @brief Get the CPU Frequency Boost state. + * @retval FreqBoost returns the CPU Frequency Boost state. + * This return value can be a value of @ref FLASHEx_OB_CPUFREQ_BOOST + */ +static uint32_t FLASH_OB_CPUFreq_GetBoost(void) +{ + return (FLASH->OPTSR2_CUR & FLASH_OPTSR2_CPUFREQ_BOOST); +} +#endif /* FLASH_OPTSR2_CPUFREQ_BOOST */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c new file mode 100644 index 0000000..3580f78 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c @@ -0,0 +1,555 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Analog mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input floating mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on open-drain or push-pull + type and the IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt/event capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. + + The external interrupt/event controller consists of up to 23 edge detectors + (16 lines are connected to GPIO) for generating event/interrupt requests (each + input line can be independently configured to select the type (interrupt or event) + and the corresponding trigger event (rising or falling or both). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel + or DAC output. + (++) In case of external interrupt/event selection the "Mode" member from + GPIO_InitTypeDef structure select the type (interrupt or event) and + the corresponding trigger event (rising or falling or both). + + (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input floating mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as + general purpose PH0 and PH1, respectively, when the HSE oscillator is off. + The HSE has priority over the GPIO function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ + +#if defined(DUAL_CORE) +#define EXTI_CPU1 (0x01000000U) +#define EXTI_CPU2 (0x02000000U) +#endif /*DUAL_CORE*/ +#define GPIO_NUMBER (16U) +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize and de-initialize the GPIOs + to be ready for use. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00U; + uint32_t iocurrent; + uint32_t temp; + EXTI_Core_TypeDef *EXTI_CurrentCPU; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + EXTI_CurrentCPU = EXTI_D2; /* EXTI for CM4 CPU */ +#else + EXTI_CurrentCPU = EXTI_D1; /* EXTI for CM7 CPU */ +#endif + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00U) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1UL << position); + + if (iocurrent != 0x00U) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U)); + temp |= (GPIO_Init->Speed << (position * 2U)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + /* Check the Pull parameter */ + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Activate the Pull-up or Pull down resistor for the current IO */ + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3U]; + temp &= ~(0xFU << ((position & 0x07U) * 4U)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07U) * 4U)); + GPIOx->AFR[position >> 3U] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2U)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2U)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00U) + { + /* Enable SYSCFG Clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + temp = SYSCFG->EXTICR[position >> 2U]; + temp &= ~(0x0FUL << (4U * (position & 0x03U))); + temp |= (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U))); + SYSCFG->EXTICR[position >> 2U] = temp; + + /* Clear Rising Falling edge configuration */ + temp = EXTI->RTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00U) + { + temp |= iocurrent; + } + EXTI->RTSR1 = temp; + + temp = EXTI->FTSR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00U) + { + temp |= iocurrent; + } + EXTI->FTSR1 = temp; + + temp = EXTI_CurrentCPU->EMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_EVT) != 0x00U) + { + temp |= iocurrent; + } + EXTI_CurrentCPU->EMR1 = temp; + + /* Clear EXTI line configuration */ + temp = EXTI_CurrentCPU->IMR1; + temp &= ~(iocurrent); + if ((GPIO_Init->Mode & EXTI_IT) != 0x00U) + { + temp |= iocurrent; + } + EXTI_CurrentCPU->IMR1 = temp; + } + } + + position++; + } +} + +/** + * @brief De-initializes the GPIOx peripheral registers to their default reset values. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00U; + uint32_t iocurrent; + uint32_t tmp; + EXTI_Core_TypeDef *EXTI_CurrentCPU; + +#if defined(DUAL_CORE) && defined(CORE_CM4) + EXTI_CurrentCPU = EXTI_D2; /* EXTI for CM4 CPU */ +#else + EXTI_CurrentCPU = EXTI_D1; /* EXTI for CM7 CPU */ +#endif + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00U) + { + /* Get current io position */ + iocurrent = GPIO_Pin & (1UL << position) ; + + if (iocurrent != 0x00U) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + tmp = SYSCFG->EXTICR[position >> 2U]; + tmp &= (0x0FUL << (4U * (position & 0x03U))); + if (tmp == (GPIO_GET_INDEX(GPIOx) << (4U * (position & 0x03U)))) + { + /* Clear EXTI line configuration for Current CPU */ + EXTI_CurrentCPU->IMR1 &= ~(iocurrent); + EXTI_CurrentCPU->EMR1 &= ~(iocurrent); + + /* Clear Rising Falling edge configuration */ + EXTI->FTSR1 &= ~(iocurrent); + EXTI->RTSR1 &= ~(iocurrent); + + tmp = 0x0FUL << (4U * (position & 0x03U)); + SYSCFG->EXTICR[position >> 2U] &= ~tmp; + } + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2U)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3U] &= ~(0xFU << ((position & 0x07U) * 4U)) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2U)); + } + + position++; + } +} + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Reads the specified input port pin. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00U) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Sets or clears the selected data port bit. + * + * @note This function uses GPIOx_BSRR register to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState: specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = GPIO_Pin; + } + else + { + GPIOx->BSRR = (uint32_t)GPIO_Pin << GPIO_NUMBER; + } +} + +/** + * @brief Toggles the specified GPIO pins. + * @param GPIOx: Where x can be (A..K) to select the GPIO peripheral. + * @param GPIO_Pin: Specifies the pins to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** + * @brief Locks GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32H7 family + * @param GPIO_Pin: specifies the port bit to be locked. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence*/ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00U) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) +{ +#if defined(DUAL_CORE) && defined(CORE_CM4) + if (__HAL_GPIO_EXTID2_GET_IT(GPIO_Pin) != 0x00U) + { + __HAL_GPIO_EXTID2_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +#else + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != 0x00U) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIO_Pin); + } +#endif +} + +/** + * @brief EXTI line detection callback. + * @param GPIO_Pin: Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c new file mode 100644 index 0000000..1d17bac --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c @@ -0,0 +1,447 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_hsem.c + * @author MCD Application Team + * @brief HSEM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the semaphore peripheral: + * + Semaphore Take function (2-Step Procedure) , non blocking + * + Semaphore FastTake function (1-Step Procedure) , non blocking + * + Semaphore Status check + * + Semaphore Clear Key Set and Get + * + Release and release all functions + * + Semaphore notification enabling and disabling and callnack functions + * + IRQ handler management + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#)Take a semaphore In 2-Step mode Using function HAL_HSEM_Take. This function takes as parameters : + (++) the semaphore ID from 0 to 31 + (++) the process ID from 0 to 255 + (#) Fast Take semaphore In 1-Step mode Using function HAL_HSEM_FastTake. This function takes as parameter : + (++) the semaphore ID from 0_ID to 31. Note that the process ID value is implicitly assumed as zero + (#) Check if a semaphore is Taken using function HAL_HSEM_IsSemTaken. This function takes as parameter : + (++) the semaphore ID from 0_ID to 31 + (++) It returns 1 if the given semaphore is taken otherwise (Free) zero + (#)Release a semaphore using function with HAL_HSEM_Release. This function takes as parameters : + (++) the semaphore ID from 0 to 31 + (++) the process ID from 0 to 255: + (++) Note: If ProcessID and MasterID match, semaphore is freed, and an interrupt + may be generated when enabled (notification activated). If ProcessID or MasterID does not match, + semaphore remains taken (locked) + + (#)Release all semaphores at once taken by a given Master using function HAL_HSEM_Release_All + This function takes as parameters : + (++) the Release Key (value from 0 to 0xFFFF) can be Set or Get respectively by + HAL_HSEM_SetClearKey() or HAL_HSEM_GetClearKey functions + (++) the Master ID: + (++) Note: If the Key and MasterID match, all semaphores taken by the given CPU that corresponds + to MasterID will be freed, and an interrupt may be generated when enabled (notification activated). If the + Key or the MasterID doesn't match, semaphores remains taken (locked) + + (#)Semaphores Release all key functions: + (++) HAL_HSEM_SetClearKey() to set semaphore release all Key + (++) HAL_HSEM_GetClearKey() to get release all Key + (#)Semaphores notification functions : + (++) HAL_HSEM_ActivateNotification to activate a notification callback on + a given semaphores Mask (bitfield). When one or more semaphores defined by the mask are released + the callback HAL_HSEM_FreeCallback will be asserted giving as parameters a mask of the released + semaphores (bitfield). + + (++) HAL_HSEM_DeactivateNotification to deactivate the notification of a given semaphores Mask (bitfield). + (++) See the description of the macro __HAL_HSEM_SEMID_TO_MASK to check how to calculate a semaphore mask + Used by the notification functions + *** HSEM HAL driver macros list *** + ============================================= + [..] Below the list of most used macros in HSEM HAL driver. + + (+) __HAL_HSEM_SEMID_TO_MASK: Helper macro to convert a Semaphore ID to a Mask. + [..] Example of use : + [..] mask = __HAL_HSEM_SEMID_TO_MASK(8) | __HAL_HSEM_SEMID_TO_MASK(21) | __HAL_HSEM_SEMID_TO_MASK(25). + [..] All next macros take as parameter a semaphore Mask (bitfiled) that can be constructed using __HAL_HSEM_SEMID_TO_MASK as the above example. + (+) __HAL_HSEM_ENABLE_IT: Enable the specified semaphores Mask interrupts. + (+) __HAL_HSEM_DISABLE_IT: Disable the specified semaphores Mask interrupts. + (+) __HAL_HSEM_GET_IT: Checks whether the specified semaphore interrupt has occurred or not. + (+) __HAL_HSEM_GET_FLAG: Get the semaphores status release flags. + (+) __HAL_HSEM_CLEAR_FLAG: Clear the semaphores status release flags. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup HSEM HSEM + * @brief HSEM HAL module driver + * @{ + */ + +#ifdef HAL_HSEM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(DUAL_CORE) +/** @defgroup HSEM_Private_Constants HSEM Private Constants + * @{ + */ + +#ifndef HSEM_R_MASTERID +#define HSEM_R_MASTERID HSEM_R_COREID +#endif + +#ifndef HSEM_RLR_MASTERID +#define HSEM_RLR_MASTERID HSEM_RLR_COREID +#endif + +#ifndef HSEM_CR_MASTERID +#define HSEM_CR_MASTERID HSEM_CR_COREID +#endif + +/** + * @} + */ +#endif /* DUAL_CORE */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HSEM_Exported_Functions HSEM Exported Functions + * @{ + */ + +/** @defgroup HSEM_Exported_Functions_Group1 Take and Release functions + * @brief HSEM Take and Release functions + * +@verbatim + ============================================================================== + ##### HSEM Take and Release functions ##### + ============================================================================== +[..] This section provides functions allowing to: + (+) Take a semaphore with 2 Step method + (+) Fast Take a semaphore with 1 Step method + (+) Check semaphore state Taken or not + (+) Release a semaphore + (+) Release all semaphore at once + +@endverbatim + * @{ + */ + + +/** + * @brief Take a semaphore in 2 Step mode. + * @param SemID: semaphore ID from 0 to 31 + * @param ProcessID: Process ID from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID) +{ + /* Check the parameters */ + assert_param(IS_HSEM_SEMID(SemID)); + assert_param(IS_HSEM_PROCESSID(ProcessID)); + +#if USE_MULTI_CORE_SHARED_CODE != 0U + /* First step write R register with MasterID, processID and take bit=1*/ + HSEM->R[SemID] = ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK); + + /* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */ + if (HSEM->R[SemID] == ((ProcessID & HSEM_R_PROCID) | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID) | HSEM_R_LOCK)) + { + /*take success when MasterID and ProcessID match and take bit set*/ + return HAL_OK; + } +#else + /* First step write R register with MasterID, processID and take bit=1*/ + HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK); + + /* second step : read the R register . Take achieved if MasterID and processID match and take bit set to 1 */ + if (HSEM->R[SemID] == (ProcessID | HSEM_CR_COREID_CURRENT | HSEM_R_LOCK)) + { + /*take success when MasterID and ProcessID match and take bit set*/ + return HAL_OK; + } +#endif + + /* Semaphore take fails*/ + return HAL_ERROR; +} + +/** + * @brief Fast Take a semaphore with 1 Step mode. + * @param SemID: semaphore ID from 0 to 31 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HSEM_FastTake(uint32_t SemID) +{ + /* Check the parameters */ + assert_param(IS_HSEM_SEMID(SemID)); + +#if USE_MULTI_CORE_SHARED_CODE != 0U + /* Read the RLR register to take the semaphore */ + if (HSEM->RLR[SemID] == (((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_RLR_MASTERID) | HSEM_RLR_LOCK)) + { + /*take success when MasterID match and take bit set*/ + return HAL_OK; + } +#else + /* Read the RLR register to take the semaphore */ + if (HSEM->RLR[SemID] == (HSEM_CR_COREID_CURRENT | HSEM_RLR_LOCK)) + { + /*take success when MasterID match and take bit set*/ + return HAL_OK; + } +#endif + + /* Semaphore take fails */ + return HAL_ERROR; +} +/** + * @brief Check semaphore state Taken or not. + * @param SemID: semaphore ID + * @retval HAL HSEM state + */ +uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID) +{ + return (((HSEM->R[SemID] & HSEM_R_LOCK) != 0U) ? 1UL : 0UL); +} + + +/** + * @brief Release a semaphore. + * @param SemID: semaphore ID from 0 to 31 + * @param ProcessID: Process ID from 0 to 255 + * @retval None + */ +void HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID) +{ + /* Check the parameters */ + assert_param(IS_HSEM_SEMID(SemID)); + assert_param(IS_HSEM_PROCESSID(ProcessID)); + + /* Clear the semaphore by writing to the R register : the MasterID , the processID and take bit = 0 */ +#if USE_MULTI_CORE_SHARED_CODE != 0U + HSEM->R[SemID] = (ProcessID | ((HAL_GetCurrentCPUID() << POSITION_VAL(HSEM_R_MASTERID)) & HSEM_R_MASTERID)); +#else + HSEM->R[SemID] = (ProcessID | HSEM_CR_COREID_CURRENT); +#endif + +} + +/** + * @brief Release All semaphore used by a given Master . + * @param Key: Semaphore Key , value from 0 to 0xFFFF + * @param CoreID: CoreID of the CPU that is using semaphores to be released + * @retval None + */ +void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID) +{ + assert_param(IS_HSEM_KEY(Key)); + assert_param(IS_HSEM_COREID(CoreID)); + + HSEM->CR = ((Key << HSEM_CR_KEY_Pos) | (CoreID << HSEM_CR_COREID_Pos)); +} + +/** + * @} + */ + +/** @defgroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions + * @brief HSEM Set and Get Key functions. + * +@verbatim + ============================================================================== + ##### HSEM Set and Get Key functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Set semaphore Key + (+) Get semaphore Key +@endverbatim + + * @{ + */ + +/** + * @brief Set semaphore Key . + * @param Key: Semaphore Key , value from 0 to 0xFFFF + * @retval None + */ +void HAL_HSEM_SetClearKey(uint32_t Key) +{ + assert_param(IS_HSEM_KEY(Key)); + + MODIFY_REG(HSEM->KEYR, HSEM_KEYR_KEY, (Key << HSEM_KEYR_KEY_Pos)); + +} + +/** + * @brief Get semaphore Key . + * @retval Semaphore Key , value from 0 to 0xFFFF + */ +uint32_t HAL_HSEM_GetClearKey(void) +{ + return (HSEM->KEYR >> HSEM_KEYR_KEY_Pos); +} + +/** + * @} + */ + +/** @defgroup HSEM_Exported_Functions_Group3 HSEM IRQ handler management + * @brief HSEM Notification functions. + * +@verbatim + ============================================================================== + ##### HSEM IRQ handler management and Notification functions ##### + ============================================================================== +[..] This section provides HSEM IRQ handler and Notification function. + +@endverbatim + * @{ + */ + +/** + * @brief Activate Semaphore release Notification for a given Semaphores Mask . + * @param SemMask: Mask of Released semaphores + * @retval Semaphore Key + */ +void HAL_HSEM_ActivateNotification(uint32_t SemMask) +{ +#if USE_MULTI_CORE_SHARED_CODE != 0U + /*enable the semaphore mask interrupts */ + if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID) + { + /*Use interrupt line 0 for CPU1 Master */ + HSEM->C1IER |= SemMask; + } + else /* HSEM_CPU2_COREID */ + { + /*Use interrupt line 1 for CPU2 Master*/ + HSEM->C2IER |= SemMask; + } +#else + HSEM_COMMON->IER |= SemMask; +#endif +} + +/** + * @brief Deactivate Semaphore release Notification for a given Semaphores Mask . + * @param SemMask: Mask of Released semaphores + * @retval Semaphore Key + */ +void HAL_HSEM_DeactivateNotification(uint32_t SemMask) +{ +#if USE_MULTI_CORE_SHARED_CODE != 0U + /*enable the semaphore mask interrupts */ + if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID) + { + /*Use interrupt line 0 for CPU1 Master */ + HSEM->C1IER &= ~SemMask; + } + else /* HSEM_CPU2_COREID */ + { + /*Use interrupt line 1 for CPU2 Master*/ + HSEM->C2IER &= ~SemMask; + } +#else + HSEM_COMMON->IER &= ~SemMask; +#endif +} + +/** + * @brief This function handles HSEM interrupt request + * @retval None + */ +void HAL_HSEM_IRQHandler(void) +{ + uint32_t statusreg; +#if USE_MULTI_CORE_SHARED_CODE != 0U + if (HAL_GetCurrentCPUID() == HSEM_CPU1_COREID) + { + /* Get the list of masked freed semaphores*/ + statusreg = HSEM->C1MISR; /*Use interrupt line 0 for CPU1 Master*/ + + /*Disable Interrupts*/ + HSEM->C1IER &= ~((uint32_t)statusreg); + + /*Clear Flags*/ + HSEM->C1ICR = ((uint32_t)statusreg); + } + else /* HSEM_CPU2_COREID */ + { + /* Get the list of masked freed semaphores*/ + statusreg = HSEM->C2MISR;/*Use interrupt line 1 for CPU2 Master*/ + + /*Disable Interrupts*/ + HSEM->C2IER &= ~((uint32_t)statusreg); + + /*Clear Flags*/ + HSEM->C2ICR = ((uint32_t)statusreg); + } +#else + /* Get the list of masked freed semaphores*/ + statusreg = HSEM_COMMON->MISR; + + /*Disable Interrupts*/ + HSEM_COMMON->IER &= ~((uint32_t)statusreg); + + /*Clear Flags*/ + HSEM_COMMON->ICR = ((uint32_t)statusreg); + +#endif + /* Call FreeCallback */ + HAL_HSEM_FreeCallback(statusreg); +} + +/** + * @brief Semaphore Released Callback. + * @param SemMask: Mask of Released semaphores + * @retval None + */ +__weak void HAL_HSEM_FreeCallback(uint32_t SemMask) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(SemMask); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_HSEM_FreeCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_HSEM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c new file mode 100644 index 0000000..c9ad0e7 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c @@ -0,0 +1,7268 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive stream or channel depends on Instance + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx stream or channel depends on Instance + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx stream or channel depends on Instance + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + hi2c->Instance->CR2 = (I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_WRITE); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, (I2C_XFER_TX_IT | I2C_XFER_RX_IT)); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (I2C_Trials == Trials) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Increment Trials */ + I2C_Trials++; + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA stream or channel depends on Instance */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + if (hi2c->Mode == HAL_I2C_MODE_MASTER) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + uint32_t tmppreviousstate; + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA stream or channel depends on Instance */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA stream or channel depends on Instance */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + uint32_t treatdmaerror = 0U; + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + if (hi2c->hdmatx != NULL) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmaerror = 1U; + } + } + + if (hi2c->hdmarx != NULL) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmaerror = 1U; + } + } + + /* Check if a FIFO error is detected, if true normal use case, so no specific action to perform */ + if (!((HAL_DMA_GetError(hdma) == HAL_DMA_ERROR_FE)) && (treatdmaerror != 0U)) + { + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } +} + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + return HAL_OK; + } + else + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \ + (hi2c->XferISR == I2C_Slave_ISR_DMA)) + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK, and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c new file mode 100644 index 0000000..d9b8e46 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c @@ -0,0 +1,372 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + WakeUp Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32H7xx + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable wakeup from Stop mode(s) + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure Noise Filter and Wake Up Feature + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of I2C Wake Up Mode using the functions : + (++) HAL_I2CEx_EnableWakeUp() + (++) HAL_I2CEx_DisableWakeUp() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions + * @brief WakeUp Mode Functions + * +@verbatim + =============================================================================== + ##### WakeUp Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Wake Up Feature + +@endverbatim + * @{ + */ + +/** + * @brief Enable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 |= I2C_CR1_WUPEN; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable I2C wakeup from Stop mode(s). + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c) +{ + /* Check the parameters */ + assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Enable wakeup from stop mode */ + hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN); + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be enabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @note For all I2C5 pins fast mode plus driving capability can be enabled + * only by using I2C_FASTMODEPLUS_I2C5 parameter. + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->PMCR, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @note For I2C1, fast mode plus driving capability can be disabled on all selected + * I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently + * on each one of the following pins PB6, PB7, PB8 and PB9. + * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability + * can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter. + * @note For all I2C2 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C2 parameter. + * @note For all I2C3 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C3 parameter. + * @note For all I2C4 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C4 parameter. + * @note For all I2C5 pins fast mode plus driving capability can be disabled + * only by using I2C_FASTMODEPLUS_I2C5 parameter. + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable SYSCFG clock */ + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->PMCR, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c new file mode 100644 index 0000000..089d9fb --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c @@ -0,0 +1,1899 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_mdma.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Master Direct Memory Access (MDMA) peripheral: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral State and errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the MDMA Channel + (except for internal SRAM/FLASH memories: no initialization is + necessary) please refer to Reference manual for connection between peripherals + and MDMA requests. + + (#) + For a given Channel use HAL_MDMA_Init function to program the required configuration through the following parameters: + transfer request , channel priority, data endianness, Source increment, destination increment , + source data size, destination data size, data alignment, source Burst, destination Burst , + buffer Transfer Length, Transfer Trigger Mode (buffer transfer, block transfer, repeated block transfer + or full transfer) source and destination block address offset, mask address and data. + + If using the MDMA in linked list mode then use function HAL_MDMA_LinkedList_CreateNode to fill a transfer node. + Note that parameters given to the function HAL_MDMA_Init corresponds always to the node zero. + Use function HAL_MDMA_LinkedList_AddNode to connect the created node to the linked list at a given position. + User can make a linked list circular using function HAL_MDMA_LinkedList_EnableCircularMode , this function will automatically connect the + last node of the list to the first one in order to make the list circular. + In this case the linked list will loop on node 1 : first node connected after the initial transfer defined by the HAL_MDMA_Init + + -@- The initial transfer itself (node 0 corresponding to the Init). + User can disable the circular mode using function HAL_MDMA_LinkedList_DisableCircularMode, this function will then remove + the connection between last node and first one. + + Function HAL_MDMA_LinkedList_RemoveNode can be used to remove (disconnect) a node from the transfer linked list. + When a linked list is circular (last node connected to first one), if removing node1 (node where the linked list loops), + the linked list remains circular and node 2 becomes the first one. + Note that if the linked list is made circular the transfer will loop infinitely (or until aborted by the user). + + [..] + (+) User can select the transfer trigger mode (parameter TransferTriggerMode) to define the amount of data to be + transfer upon a request : + (++) MDMA_BUFFER_TRANSFER : each request triggers a transfer of BufferTransferLength data + with BufferTransferLength defined within the HAL_MDMA_Init. + (++) MDMA_BLOCK_TRANSFER : each request triggers a transfer of a block + with block size defined within the function HAL_MDMA_Start/HAL_MDMA_Start_IT + or within the current linked list node parameters. + (++) MDMA_REPEAT_BLOCK_TRANSFER : each request triggers a transfer of a number of blocks + with block size and number of blocks defined within the function HAL_MDMA_Start/HAL_MDMA_Start_IT + or within the current linked list node parameters. + (++) MDMA_FULL_TRANSFER : each request triggers a full transfer + all blocks and all nodes(if a linked list has been created using HAL_MDMA_LinkedList_CreateNode \ HAL_MDMA_LinkedList_AddNode). + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_MDMA_Start() to start MDMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred. + (+) Use HAL_MDMA_PollForTransfer() to poll for the end of current transfer or a transfer level + In this case a fixed Timeout can be configured by User depending from his application. + (+) Use HAL_MDMA_Abort() function to abort the current transfer : blocking method this API returns + when the abort ends or timeout (should not be called from an interrupt service routine). + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the MDMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the MDMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_MDMA_Start_IT() to start MDMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. In this + case the MDMA interrupt is configured. + (+) Use HAL_MDMA_IRQHandler() called under MDMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_MDMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e a member of MDMA handle structure). + + (+) Use HAL_MDMA_Abort_IT() function to abort the current transfer : non-blocking method. This API will finish the execution immediately + then the callback XferAbortCallback (if specified by the user) is asserted once the MDMA channel has effectively aborted. + (could be called from an interrupt service routine). + + (+) Use functions HAL_MDMA_RegisterCallback and HAL_MDMA_UnRegisterCallback respectevely to register unregister user callbacks + from the following list : + (++) XferCpltCallback : transfer complete callback. + (++) XferBufferCpltCallback : buffer transfer complete callback. + (++) XferBlockCpltCallback : block transfer complete callback. + (++) XferRepeatBlockCpltCallback : repeated block transfer complete callback. + (++) XferErrorCallback : transfer error callback. + (++) XferAbortCallback : transfer abort complete callback. + + [..] + (+) If the transfer Request corresponds to SW request (MDMA_REQUEST_SW) User can use function HAL_MDMA_GenerateSWRequest to + trigger requests manually. Function HAL_MDMA_GenerateSWRequest must be used with the following precautions: + (++) This function returns an error if used while the Transfer has ended or not started. + (++) If used while the current request has not been served yet (current request transfer on going) + this function returns an error and the new request is ignored. + + Generally this function should be used in conjunctions with the MDMA callbacks: + (++) example 1: + (+++) Configure a transfer with request set to MDMA_REQUEST_SW and trigger mode set to MDMA_BUFFER_TRANSFER + (+++) Register a callback for buffer transfer complete (using callback ID set to HAL_MDMA_XFER_BUFFERCPLT_CB_ID) + (+++) After calling HAL_MDMA_Start_IT the MDMA will issue the transfer of a first BufferTransferLength data. + (+++) When the buffer transfer complete callback is asserted first buffer has been transferred and user can ask for a new buffer transfer + request using HAL_MDMA_GenerateSWRequest. + + (++) example 2: + (+++) Configure a transfer with request set to MDMA_REQUEST_SW and trigger mode set to MDMA_BLOCK_TRANSFER + (+++) Register a callback for block transfer complete (using callback ID HAL_MDMA_XFER_BLOCKCPLT_CB_ID) + (+++) After calling HAL_MDMA_Start_IT the MDMA will issue the transfer of a first block of data. + (+++) When the block transfer complete callback is asserted the first block has been transferred and user can ask + for a new block transfer request using HAL_MDMA_GenerateSWRequest. + + [..] Use HAL_MDMA_GetState() function to return the MDMA state and HAL_MDMA_GetError() in case of error detection. + + *** MDMA HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in MDMA HAL driver. + + (+) __HAL_MDMA_ENABLE: Enable the specified MDMA Channel. + (+) __HAL_MDMA_DISABLE: Disable the specified MDMA Channel. + (+) __HAL_MDMA_GET_FLAG: Get the MDMA Channel pending flags. + (+) __HAL_MDMA_CLEAR_FLAG: Clear the MDMA Channel pending flags. + (+) __HAL_MDMA_ENABLE_IT: Enable the specified MDMA Channel interrupts. + (+) __HAL_MDMA_DISABLE_IT: Disable the specified MDMA Channel interrupts. + (+) __HAL_MDMA_GET_IT_SOURCE: Check whether the specified MDMA Channel interrupt has occurred or not. + + [..] + (@) You can refer to the header file of the MDMA HAL driver for more useful macros. + + [..] + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup MDMA MDMA + * @brief MDMA HAL module driver + * @{ + */ + +#ifdef HAL_MDMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup MDMA_Private_Constants + * @{ + */ +#define HAL_TIMEOUT_MDMA_ABORT 5U /* 5 ms */ +#define HAL_MDMA_CHANNEL_SIZE 0x40U /* an MDMA instance channel size is 64 byte */ +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup MDMA_Private_Functions_Prototypes + * @{ + */ +static void MDMA_SetConfig(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount); +static void MDMA_Init(MDMA_HandleTypeDef *hmdma); + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions MDMA Exported Functions + * @{ + */ + +/** @addtogroup MDMA_Exported_Functions_Group1 + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to : + Initialize and de-initialize the MDMA channel. + Register and Unregister MDMA callbacks + [..] + The HAL_MDMA_Init() function follows the MDMA channel configuration procedures as described in + reference manual. + The HAL_MDMA_DeInit function allows to deinitialize the MDMA channel. + HAL_MDMA_RegisterCallback and HAL_MDMA_UnRegisterCallback functions allows + respectevely to register/unregister an MDMA callback function. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the MDMA according to the specified + * parameters in the MDMA_InitTypeDef and create the associated handle. + * @param hmdma: Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MDMA_STREAM_ALL_INSTANCE(hmdma->Instance)); + assert_param(IS_MDMA_PRIORITY(hmdma->Init.Priority)); + assert_param(IS_MDMA_ENDIANNESS_MODE(hmdma->Init.Endianness)); + assert_param(IS_MDMA_REQUEST(hmdma->Init.Request)); + assert_param(IS_MDMA_SOURCE_INC(hmdma->Init.SourceInc)); + assert_param(IS_MDMA_DESTINATION_INC(hmdma->Init.DestinationInc)); + assert_param(IS_MDMA_SOURCE_DATASIZE(hmdma->Init.SourceDataSize)); + assert_param(IS_MDMA_DESTINATION_DATASIZE(hmdma->Init.DestDataSize)); + assert_param(IS_MDMA_DATA_ALIGNMENT(hmdma->Init.DataAlignment)); + assert_param(IS_MDMA_SOURCE_BURST(hmdma->Init.SourceBurst)); + assert_param(IS_MDMA_DESTINATION_BURST(hmdma->Init.DestBurst)); + assert_param(IS_MDMA_BUFFER_TRANSFER_LENGTH(hmdma->Init.BufferTransferLength)); + assert_param(IS_MDMA_TRANSFER_TRIGGER_MODE(hmdma->Init.TransferTriggerMode)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(hmdma->Init.SourceBlockAddressOffset)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(hmdma->Init.DestBlockAddressOffset)); + + + /* Allocate lock resource */ + __HAL_UNLOCK(hmdma); + + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Disable the MDMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Check if the MDMA channel is effectively disabled */ + while((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_MDMA_ABORT) + { + /* Update error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_TIMEOUT; + + /* Change the MDMA state */ + hmdma->State = HAL_MDMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Initialize the MDMA channel registers */ + MDMA_Init(hmdma); + + /* Reset the MDMA first/last linkedlist node addresses and node counter */ + hmdma->FirstLinkedListNodeAddress = 0; + hmdma->LastLinkedListNodeAddress = 0; + hmdma->LinkedListNodeCounter = 0; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Initialize the MDMA state */ + hmdma->State = HAL_MDMA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the MDMA peripheral + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_DeInit(MDMA_HandleTypeDef *hmdma) +{ + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Disable the selected MDMA Channelx */ + __HAL_MDMA_DISABLE(hmdma); + + /* Reset MDMA Channel control register */ + hmdma->Instance->CCR = 0; + hmdma->Instance->CTCR = 0; + hmdma->Instance->CBNDTR = 0; + hmdma->Instance->CSAR = 0; + hmdma->Instance->CDAR = 0; + hmdma->Instance->CBRUR = 0; + hmdma->Instance->CLAR = 0; + hmdma->Instance->CTBR = 0; + hmdma->Instance->CMAR = 0; + hmdma->Instance->CMDR = 0; + + /* Clear all flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma,(MDMA_FLAG_TE | MDMA_FLAG_CTC | MDMA_FLAG_BRT | MDMA_FLAG_BT | MDMA_FLAG_BFTC)); + + /* Reset the MDMA first/last linkedlist node addresses and node counter */ + hmdma->FirstLinkedListNodeAddress = 0; + hmdma->LastLinkedListNodeAddress = 0; + hmdma->LinkedListNodeCounter = 0; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Initialize the MDMA state */ + hmdma->State = HAL_MDMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return HAL_OK; +} + +/** + * @brief Config the Post request Mask address and Mask data + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param MaskAddress: specifies the address to be updated (written) with MaskData after a request is served. + * @param MaskData: specifies the value to be written to MaskAddress after a request is served. + * MaskAddress and MaskData could be used to automatically clear a peripheral flag when the request is served. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* if HW request set Post Request MaskAddress and MaskData, */ + if((hmdma->Instance->CTCR & MDMA_CTCR_SWRM) == 0U) + { + /* Set the HW request clear Mask and Data */ + hmdma->Instance->CMAR = MaskAddress; + hmdma->Instance->CMDR = MaskData; + + /* + -If the request is done by SW : BWM could be set to 1 or 0. + -If the request is done by a peripheral : + If mask address not set (0) => BWM must be set to 0 + If mask address set (different than 0) => BWM could be set to 1 or 0 + */ + if(MaskAddress == 0U) + { + hmdma->Instance->CTCR &= ~MDMA_CTCR_BWM; + } + else + { + hmdma->Instance->CTCR |= MDMA_CTCR_BWM; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return status; +} + +/** + * @brief Register callbacks + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param CallbackID: User Callback identifier + * @param pCallback: pointer to callbacsk function. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + switch (CallbackID) + { + case HAL_MDMA_XFER_CPLT_CB_ID: + hmdma->XferCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_BUFFERCPLT_CB_ID: + hmdma->XferBufferCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_BLOCKCPLT_CB_ID: + hmdma->XferBlockCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID: + hmdma->XferRepeatBlockCpltCallback = pCallback; + break; + + case HAL_MDMA_XFER_ERROR_CB_ID: + hmdma->XferErrorCallback = pCallback; + break; + + case HAL_MDMA_XFER_ABORT_CB_ID: + hmdma->XferAbortCallback = pCallback; + break; + + default: + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param CallbackID: User Callback identifier + * a HAL_MDMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + switch (CallbackID) + { + case HAL_MDMA_XFER_CPLT_CB_ID: + hmdma->XferCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_BUFFERCPLT_CB_ID: + hmdma->XferBufferCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_BLOCKCPLT_CB_ID: + hmdma->XferBlockCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID: + hmdma->XferRepeatBlockCpltCallback = NULL; + break; + + case HAL_MDMA_XFER_ERROR_CB_ID: + hmdma->XferErrorCallback = NULL; + break; + + case HAL_MDMA_XFER_ABORT_CB_ID: + hmdma->XferAbortCallback = NULL; + break; + + case HAL_MDMA_XFER_ALL_CB_ID: + hmdma->XferCpltCallback = NULL; + hmdma->XferBufferCpltCallback = NULL; + hmdma->XferBlockCpltCallback = NULL; + hmdma->XferRepeatBlockCpltCallback = NULL; + hmdma->XferErrorCallback = NULL; + hmdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hmdma); + + return status; +} + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions_Group2 + * +@verbatim + =============================================================================== + ##### Linked list operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Create a linked list node + (+) Add a node to the MDMA linked list + (+) Remove a node from the MDMA linked list + (+) Enable/Disable linked list circular mode +@endverbatim + * @{ + */ + +/** + * @brief Initializes an MDMA Link Node according to the specified + * parameters in the pMDMA_LinkedListNodeConfig . + * @param pNode: Pointer to a MDMA_LinkNodeTypeDef structure that contains Linked list node + * registers configurations. + * @param pNodeConfig: Pointer to a MDMA_LinkNodeConfTypeDef structure that contains + * the configuration information for the specified MDMA Linked List Node. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig) +{ + uint32_t addressMask; + uint32_t blockoffset; + + /* Check the MDMA peripheral state */ + if((pNode == NULL) || (pNodeConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_MDMA_PRIORITY(pNodeConfig->Init.Priority)); + assert_param(IS_MDMA_ENDIANNESS_MODE(pNodeConfig->Init.Endianness)); + assert_param(IS_MDMA_REQUEST(pNodeConfig->Init.Request)); + assert_param(IS_MDMA_SOURCE_INC(pNodeConfig->Init.SourceInc)); + assert_param(IS_MDMA_DESTINATION_INC(pNodeConfig->Init.DestinationInc)); + assert_param(IS_MDMA_SOURCE_DATASIZE(pNodeConfig->Init.SourceDataSize)); + assert_param(IS_MDMA_DESTINATION_DATASIZE(pNodeConfig->Init.DestDataSize)); + assert_param(IS_MDMA_DATA_ALIGNMENT(pNodeConfig->Init.DataAlignment)); + assert_param(IS_MDMA_SOURCE_BURST(pNodeConfig->Init.SourceBurst)); + assert_param(IS_MDMA_DESTINATION_BURST(pNodeConfig->Init.DestBurst)); + assert_param(IS_MDMA_BUFFER_TRANSFER_LENGTH(pNodeConfig->Init.BufferTransferLength)); + assert_param(IS_MDMA_TRANSFER_TRIGGER_MODE(pNodeConfig->Init.TransferTriggerMode)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(pNodeConfig->Init.SourceBlockAddressOffset)); + assert_param(IS_MDMA_BLOCK_ADDR_OFFSET(pNodeConfig->Init.DestBlockAddressOffset)); + + assert_param(IS_MDMA_TRANSFER_LENGTH(pNodeConfig->BlockDataLength)); + assert_param(IS_MDMA_BLOCK_COUNT(pNodeConfig->BlockCount)); + + + /* Configure next Link node Address Register to zero */ + pNode->CLAR = 0; + + /* Configure the Link Node registers*/ + pNode->CTBR = 0; + pNode->CMAR = 0; + pNode->CMDR = 0; + pNode->Reserved = 0; + + /* Write new CTCR Register value */ + pNode->CTCR = pNodeConfig->Init.SourceInc | pNodeConfig->Init.DestinationInc | \ + pNodeConfig->Init.SourceDataSize | pNodeConfig->Init.DestDataSize | \ + pNodeConfig->Init.DataAlignment| pNodeConfig->Init.SourceBurst | \ + pNodeConfig->Init.DestBurst | \ + ((pNodeConfig->Init.BufferTransferLength - 1U) << MDMA_CTCR_TLEN_Pos) | \ + pNodeConfig->Init.TransferTriggerMode; + + /* If SW request set the CTCR register to SW Request Mode*/ + if(pNodeConfig->Init.Request == MDMA_REQUEST_SW) + { + pNode->CTCR |= MDMA_CTCR_SWRM; + } + + /* + -If the request is done by SW : BWM could be set to 1 or 0. + -If the request is done by a peripheral : + If mask address not set (0) => BWM must be set to 0 + If mask address set (different than 0) => BWM could be set to 1 or 0 + */ + if((pNodeConfig->Init.Request == MDMA_REQUEST_SW) || (pNodeConfig->PostRequestMaskAddress != 0U)) + { + pNode->CTCR |= MDMA_CTCR_BWM; + } + + /* Set the new CBNDTR Register value */ + pNode->CBNDTR = ((pNodeConfig->BlockCount - 1U) << MDMA_CBNDTR_BRC_Pos) & MDMA_CBNDTR_BRC; + + /* if block source address offset is negative set the Block Repeat Source address Update Mode to decrement */ + if(pNodeConfig->Init.SourceBlockAddressOffset < 0) + { + pNode->CBNDTR |= MDMA_CBNDTR_BRSUM; + /*write new CBRUR Register value : source repeat block offset */ + blockoffset = (uint32_t)(- pNodeConfig->Init.SourceBlockAddressOffset); + pNode->CBRUR = blockoffset & 0x0000FFFFU; + } + else + { + /*write new CBRUR Register value : source repeat block offset */ + pNode->CBRUR = (((uint32_t) pNodeConfig->Init.SourceBlockAddressOffset) & 0x0000FFFFU); + } + + /* if block destination address offset is negative set the Block Repeat destination address Update Mode to decrement */ + if(pNodeConfig->Init.DestBlockAddressOffset < 0) + { + pNode->CBNDTR |= MDMA_CBNDTR_BRDUM; + /*write new CBRUR Register value : destination repeat block offset */ + blockoffset = (uint32_t)(- pNodeConfig->Init.DestBlockAddressOffset); + pNode->CBRUR |= ((blockoffset & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + else + { + /*write new CBRUR Register value : destination repeat block offset */ + pNode->CBRUR |= ((((uint32_t)pNodeConfig->Init.DestBlockAddressOffset) & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + + /* Configure MDMA Link Node data length */ + pNode->CBNDTR |= pNodeConfig->BlockDataLength; + + /* Configure MDMA Link Node destination address */ + pNode->CDAR = pNodeConfig->DstAddress; + + /* Configure MDMA Link Node Source address */ + pNode->CSAR = pNodeConfig->SrcAddress; + + /* if HW request set the HW request and the requet CleraMask and ClearData MaskData, */ + if(pNodeConfig->Init.Request != MDMA_REQUEST_SW) + { + /* Set the HW request in CTBR register */ + pNode->CTBR = pNodeConfig->Init.Request & MDMA_CTBR_TSEL; + /* Set the HW request clear Mask and Data */ + pNode->CMAR = pNodeConfig->PostRequestMaskAddress; + pNode->CMDR = pNodeConfig->PostRequestMaskData; + } + + addressMask = pNodeConfig->SrcAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHBSbus is used as source (read operation) on channel x */ + pNode->CTBR |= MDMA_CTBR_SBUS; + } + + addressMask = pNodeConfig->DstAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHB bus is used as destination (write operation) on channel x */ + pNode->CTBR |= MDMA_CTBR_DBUS; + } + + return HAL_OK; +} + +/** + * @brief Connect a node to the linked list. + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param pNewNode : Pointer to a MDMA_LinkNodeTypeDef structure that contains Linked list node + * to be add to the list. + * @param pPrevNode : Pointer to the new node position in the linked list or zero to insert the new node + * at the end of the list + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode) +{ + MDMA_LinkNodeTypeDef *pNode; + uint32_t counter = 0, nodeInserted = 0; + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if((hmdma == NULL) || (pNewNode == NULL)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Check if this is the first node (after the Inititlization node) */ + if((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) + { + if(pPrevNode == NULL) + { + /* if this is the first node after the initialization + connect this node to the node 0 by updating + the MDMA channel CLAR register to this node address */ + hmdma->Instance->CLAR = (uint32_t)pNewNode; + /* Set the MDMA handle First linked List node*/ + hmdma->FirstLinkedListNodeAddress = pNewNode; + + /*reset New node link */ + pNewNode->CLAR = 0; + + /* Update the Handle last node address */ + hmdma->LastLinkedListNodeAddress = pNewNode; + + hmdma->LinkedListNodeCounter = 1; + } + else + { + hal_status = HAL_ERROR; + } + } + else if(hmdma->FirstLinkedListNodeAddress != pNewNode) + { + /* Check if the node to insert already exists*/ + pNode = hmdma->FirstLinkedListNodeAddress; + while((counter < hmdma->LinkedListNodeCounter) && (hal_status == HAL_OK)) + { + if(pNode->CLAR == (uint32_t)pNewNode) + { + hal_status = HAL_ERROR; /* error this node already exist in the linked list and it is not first node */ + } + pNode = (MDMA_LinkNodeTypeDef *)pNode->CLAR; + counter++; + } + + if(hal_status == HAL_OK) + { + /* Check if the previous node is the last one in the current list or zero */ + if((pPrevNode == hmdma->LastLinkedListNodeAddress) || (pPrevNode == NULL)) + { + /* insert the new node at the end of the list */ + pNewNode->CLAR = hmdma->LastLinkedListNodeAddress->CLAR; + hmdma->LastLinkedListNodeAddress->CLAR = (uint32_t)pNewNode; + /* Update the Handle last node address */ + hmdma->LastLinkedListNodeAddress = pNewNode; + /* Increment the linked list node counter */ + hmdma->LinkedListNodeCounter++; + } + else + { + /*insert the new node after the pPreviousNode node */ + pNode = hmdma->FirstLinkedListNodeAddress; + counter = 0; + while((counter < hmdma->LinkedListNodeCounter) && (nodeInserted == 0U)) + { + counter++; + if(pNode == pPrevNode) + { + /*Insert the new node after the previous one */ + pNewNode->CLAR = pNode->CLAR; + pNode->CLAR = (uint32_t)pNewNode; + /* Increment the linked list node counter */ + hmdma->LinkedListNodeCounter++; + nodeInserted = 1; + } + else + { + pNode = (MDMA_LinkNodeTypeDef *)pNode->CLAR; + } + } + + if(nodeInserted == 0U) + { + hal_status = HAL_ERROR; + } + } + } + } + else + { + hal_status = HAL_ERROR; + } + + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } +} + +/** + * @brief Disconnect/Remove a node from the transfer linked list. + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param pNode : Pointer to a MDMA_LinkNodeTypeDef structure that contains Linked list node + * to be removed from the list. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode) +{ + MDMA_LinkNodeTypeDef *ptmpNode; + uint32_t counter = 0, nodeDeleted = 0; + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if((hmdma == NULL) || (pNode == NULL)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* If first and last node are null (no nodes in the list) : return error*/ + if(((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) || ((uint32_t)hmdma->LastLinkedListNodeAddress == 0U) || (hmdma->LinkedListNodeCounter == 0U)) + { + hal_status = HAL_ERROR; + } + else if(hmdma->FirstLinkedListNodeAddress == pNode) /* Deleting first node */ + { + /* Delete 1st node */ + if(hmdma->LastLinkedListNodeAddress == pNode) + { + /*if the last node is at the same time the first one (1 single node after the init node 0) + then update the last node too */ + + hmdma->FirstLinkedListNodeAddress = 0; + hmdma->LastLinkedListNodeAddress = 0; + hmdma->LinkedListNodeCounter = 0; + + hmdma->Instance->CLAR = 0; + } + else + { + if((uint32_t)hmdma->FirstLinkedListNodeAddress == hmdma->LastLinkedListNodeAddress->CLAR) + { + /* if last node is looping to first (circular list) one update the last node connection */ + hmdma->LastLinkedListNodeAddress->CLAR = pNode->CLAR; + } + + /* if deleting the first node after the initialization + connect the next node to the node 0 by updating + the MDMA channel CLAR register to this node address */ + hmdma->Instance->CLAR = pNode->CLAR; + hmdma->FirstLinkedListNodeAddress = (MDMA_LinkNodeTypeDef *)hmdma->Instance->CLAR; + /* Update the Handle node counter */ + hmdma->LinkedListNodeCounter--; + } + } + else /* Deleting any other node */ + { + /*Deleted node is not the first one : find it */ + ptmpNode = hmdma->FirstLinkedListNodeAddress; + while((counter < hmdma->LinkedListNodeCounter) && (nodeDeleted == 0U)) + { + counter++; + if(ptmpNode->CLAR == ((uint32_t)pNode)) + { + /* if deleting the last node */ + if(pNode == hmdma->LastLinkedListNodeAddress) + { + /*Update the linked list last node address in the handle*/ + hmdma->LastLinkedListNodeAddress = ptmpNode; + } + /* update the next node link after deleting pMDMA_LinkedListNode */ + ptmpNode->CLAR = pNode->CLAR; + nodeDeleted = 1; + /* Update the Handle node counter */ + hmdma->LinkedListNodeCounter--; + } + else + { + ptmpNode = (MDMA_LinkNodeTypeDef *)ptmpNode->CLAR; + } + } + + if(nodeDeleted == 0U) + { + /* last node reashed without finding the node to delete : return error */ + hal_status = HAL_ERROR; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } +} + +/** + * @brief Make the linked list circular by connecting the last node to the first. + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* If first and last node are null (no nodes in the list) : return error*/ + if(((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) || ((uint32_t)hmdma->LastLinkedListNodeAddress == 0U) || (hmdma->LinkedListNodeCounter == 0U)) + { + hal_status = HAL_ERROR; + } + else + { + /* to enable circular mode Last Node should be connected to first node */ + hmdma->LastLinkedListNodeAddress->CLAR = (uint32_t)hmdma->FirstLinkedListNodeAddress; + } + + } + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; +} + +/** + * @brief Disable the linked list circular mode by setting the last node connection to null + * @param hmdma : Pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* If first and last node are null (no nodes in the list) : return error*/ + if(((uint32_t)hmdma->FirstLinkedListNodeAddress == 0U) || ((uint32_t)hmdma->LastLinkedListNodeAddress == 0U) || (hmdma->LinkedListNodeCounter == 0U)) + { + hal_status = HAL_ERROR; + } + else + { + /* to disable circular mode Last Node should be connected to NULL */ + hmdma->LastLinkedListNodeAddress->CLAR = 0; + } + + } + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + + return hal_status; +} + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions_Group3 + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start MDMA transfer + (+) Configure the source, destination address and data length and + Start MDMA transfer with interrupt + (+) Abort MDMA transfer + (+) Poll for transfer complete + (+) Generate a SW request (when Request is set to MDMA_REQUEST_SW) + (+) Handle MDMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Starts the MDMA Transfer. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param SrcAddress : The source memory Buffer address + * @param DstAddress : The destination memory Buffer address + * @param BlockDataLength : The length of a block transfer in bytes + * @param BlockCount : The number of a blocks to be transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Start(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount) +{ + /* Check the parameters */ + assert_param(IS_MDMA_TRANSFER_LENGTH(BlockDataLength)); + assert_param(IS_MDMA_BLOCK_COUNT(BlockCount)); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_MDMA_DISABLE(hmdma); + + /* Configure the source, destination address and the data length */ + MDMA_SetConfig(hmdma, SrcAddress, DstAddress, BlockDataLength, BlockCount); + + /* Enable the Peripheral */ + __HAL_MDMA_ENABLE(hmdma); + + if(hmdma->Init.Request == MDMA_REQUEST_SW) + { + /* activate If SW request mode*/ + hmdma->Instance->CCR |= MDMA_CCR_SWRQ; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Starts the MDMA Transfer with interrupts enabled. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param SrcAddress : The source memory Buffer address + * @param DstAddress : The destination memory Buffer address + * @param BlockDataLength : The length of a block transfer in bytes + * @param BlockCount : The number of a blocks to be transfer + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount) +{ + /* Check the parameters */ + assert_param(IS_MDMA_TRANSFER_LENGTH(BlockDataLength)); + assert_param(IS_MDMA_BLOCK_COUNT(BlockCount)); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hmdma); + + if(HAL_MDMA_STATE_READY == hmdma->State) + { + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_BUSY; + + /* Initialize the error code */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_MDMA_DISABLE(hmdma); + + /* Configure the source, destination address and the data length */ + MDMA_SetConfig(hmdma, SrcAddress, DstAddress, BlockDataLength, BlockCount); + + /* Enable Common interrupts i.e Transfer Error IT and Channel Transfer Complete IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, (MDMA_IT_TE | MDMA_IT_CTC)); + + if(hmdma->XferBlockCpltCallback != NULL) + { + /* if Block transfer complete Callback is set enable the corresponding IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, MDMA_IT_BT); + } + + if(hmdma->XferRepeatBlockCpltCallback != NULL) + { + /* if Repeated Block transfer complete Callback is set enable the corresponding IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, MDMA_IT_BRT); + } + + if(hmdma->XferBufferCpltCallback != NULL) + { + /* if buffer transfer complete Callback is set enable the corresponding IT*/ + __HAL_MDMA_ENABLE_IT(hmdma, MDMA_IT_BFTC); + } + + /* Enable the Peripheral */ + __HAL_MDMA_ENABLE(hmdma); + + if(hmdma->Init.Request == MDMA_REQUEST_SW) + { + /* activate If SW request mode*/ + hmdma->Instance->CCR |= MDMA_CCR_SWRQ; + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + /* Return error status */ + return HAL_BUSY; + } + + return HAL_OK; +} + +/** + * @brief Aborts the MDMA Transfer. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * + * @note After disabling a MDMA Channel, a check for wait until the MDMA Channel is + * effectively disabled is added. If a Channel is disabled + * while a data transfer is ongoing, the current data will be transferred + * and the Channel will be effectively disabled only after the transfer of + * this single data is finished. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_MDMA_STATE_BUSY != hmdma->State) + { + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + return HAL_ERROR; + } + else + { + /* Disable all the transfer interrupts */ + __HAL_MDMA_DISABLE_IT(hmdma, (MDMA_IT_TE | MDMA_IT_CTC | MDMA_IT_BT | MDMA_IT_BRT | MDMA_IT_BFTC)); + + /* Disable the channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Check if the MDMA Channel is effectively disabled */ + while((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U) + { + /* Check for the Timeout */ + if( (HAL_GetTick() - tickstart ) > HAL_TIMEOUT_MDMA_ABORT) + { + /* Update error code */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change the MDMA state */ + hmdma->State = HAL_MDMA_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Clear all interrupt flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_TE | MDMA_FLAG_CTC | MDMA_FLAG_BT | MDMA_FLAG_BRT | MDMA_FLAG_BFTC)); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change the MDMA state*/ + hmdma->State = HAL_MDMA_STATE_READY; + } + + return HAL_OK; +} + +/** + * @brief Aborts the MDMA Transfer in Interrupt mode. + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma) +{ + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_MDMA_STATE_BUSY != hmdma->State) + { + /* No transfer ongoing */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + else + { + /* Set Abort State */ + hmdma->State = HAL_MDMA_STATE_ABORT; + + /* Disable the stream */ + __HAL_MDMA_DISABLE(hmdma); + } + + return HAL_OK; +} + +/** + * @brief Polling for transfer complete. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param CompleteLevel: Specifies the MDMA level complete. + * @param Timeout: Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t levelFlag, errorFlag; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_MDMA_LEVEL_COMPLETE(CompleteLevel)); + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + if(HAL_MDMA_STATE_BUSY != hmdma->State) + { + /* No transfer ongoing */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + levelFlag = ((CompleteLevel == HAL_MDMA_FULL_TRANSFER) ? MDMA_FLAG_CTC : \ + (CompleteLevel == HAL_MDMA_BUFFER_TRANSFER)? MDMA_FLAG_BFTC : \ + (CompleteLevel == HAL_MDMA_BLOCK_TRANSFER) ? MDMA_FLAG_BT : \ + MDMA_FLAG_BRT); + + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while(__HAL_MDMA_GET_FLAG(hmdma, levelFlag) == 0U) + { + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_TE) != 0U)) + { + /* Get the transfer error source flag */ + errorFlag = hmdma->Instance->CESR; + + if((errorFlag & MDMA_CESR_TED) == 0U) + { + /* Update error code : Read Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_READ_XFER; + } + else + { + /* Update error code : Write Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_WRITE_XFER; + } + + if((errorFlag & MDMA_CESR_TEMD) != 0U) + { + /* Update error code : Error Mask Data */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_MASK_DATA; + } + + if((errorFlag & MDMA_CESR_TELD) != 0U) + { + /* Update error code : Error Linked list */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_LINKED_LIST; + } + + if((errorFlag & MDMA_CESR_ASE) != 0U) + { + /* Update error code : Address/Size alignment error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_ALIGNMENT; + } + + if((errorFlag & MDMA_CESR_BSE) != 0U) + { + /* Update error code : Block Size error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_BLOCK_SIZE; + } + + (void) HAL_MDMA_Abort(hmdma); /* if error then abort the current transfer */ + + /* + Note that the Abort function will + - Clear all transfer flags + - Unlock + - Set the State + */ + + return HAL_ERROR; + + } + + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - tickstart ) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_TIMEOUT; + + (void) HAL_MDMA_Abort(hmdma); /* if timeout then abort the current transfer */ + + /* + Note that the Abort function will + - Clear all transfer flags + - Unlock + - Set the State + */ + + return HAL_ERROR; + } + } + } + + /* Clear the transfer level flag */ + if(CompleteLevel == HAL_MDMA_BUFFER_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BFTC); + + } + else if(CompleteLevel == HAL_MDMA_BLOCK_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_BFTC | MDMA_FLAG_BT)); + + } + else if(CompleteLevel == HAL_MDMA_REPEAT_BLOCK_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_BFTC | MDMA_FLAG_BT | MDMA_FLAG_BRT)); + } + else if(CompleteLevel == HAL_MDMA_FULL_TRANSFER) + { + __HAL_MDMA_CLEAR_FLAG(hmdma, (MDMA_FLAG_BRT | MDMA_FLAG_BT | MDMA_FLAG_BFTC | MDMA_FLAG_CTC)); + + /* Process unlocked */ + __HAL_UNLOCK(hmdma); + + hmdma->State = HAL_MDMA_STATE_READY; + } + else + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Generate an MDMA SW request trigger to activate the request on the given Channel. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Stream. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma) +{ + uint32_t request_mode; + + /* Check the MDMA peripheral handle */ + if(hmdma == NULL) + { + return HAL_ERROR; + } + + /* Get the softawre request mode */ + request_mode = hmdma->Instance->CTCR & MDMA_CTCR_SWRM; + + if((hmdma->Instance->CCR & MDMA_CCR_EN) == 0U) + { + /* if no Transfer on going (MDMA enable bit not set) return error */ + hmdma->ErrorCode = HAL_MDMA_ERROR_NO_XFER; + + return HAL_ERROR; + } + else if(((hmdma->Instance->CISR & MDMA_CISR_CRQA) != 0U) || (request_mode == 0U)) + { + /* if an MDMA ongoing request has not yet end or if request mode is not SW request return error */ + hmdma->ErrorCode = HAL_MDMA_ERROR_BUSY; + + return HAL_ERROR; + } + else + { + /* Set the SW request bit to activate the request on the Channel */ + hmdma->Instance->CCR |= MDMA_CCR_SWRQ; + + return HAL_OK; + } +} + +/** + * @brief Handles MDMA interrupt request. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval None + */ +void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma) +{ + __IO uint32_t count = 0; + uint32_t timeout = SystemCoreClock / 9600U; + + uint32_t generalIntFlag, errorFlag; + + /* General Interrupt Flag management ****************************************/ + generalIntFlag = 1UL << ((((uint32_t)hmdma->Instance - (uint32_t)(MDMA_Channel0))/HAL_MDMA_CHANNEL_SIZE) & 0x1FU); + if((MDMA->GISR0 & generalIntFlag) == 0U) + { + return; /* the General interrupt flag for the current channel is down , nothing to do */ + } + + /* Transfer Error Interrupt management ***************************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_TE) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_TE) != 0U) + { + /* Disable the transfer error interrupt */ + __HAL_MDMA_DISABLE_IT(hmdma, MDMA_IT_TE); + + /* Get the transfer error source flag */ + errorFlag = hmdma->Instance->CESR; + + if((errorFlag & MDMA_CESR_TED) == 0U) + { + /* Update error code : Read Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_READ_XFER; + } + else + { + /* Update error code : Write Transfer error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_WRITE_XFER; + } + + if((errorFlag & MDMA_CESR_TEMD) != 0U) + { + /* Update error code : Error Mask Data */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_MASK_DATA; + } + + if((errorFlag & MDMA_CESR_TELD) != 0U) + { + /* Update error code : Error Linked list */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_LINKED_LIST; + } + + if((errorFlag & MDMA_CESR_ASE) != 0U) + { + /* Update error code : Address/Size alignment error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_ALIGNMENT; + } + + if((errorFlag & MDMA_CESR_BSE) != 0U) + { + /* Update error code : Block Size error error */ + hmdma->ErrorCode |= HAL_MDMA_ERROR_BLOCK_SIZE; + } + + /* Clear the transfer error flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_TE); + } + } + + /* Buffer Transfer Complete Interrupt management ******************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_BFTC) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_BFTC) != 0U) + { + /* Clear the buffer transfer complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BFTC); + + if(hmdma->XferBufferCpltCallback != NULL) + { + /* Buffer transfer callback */ + hmdma->XferBufferCpltCallback(hmdma); + } + } + } + + /* Block Transfer Complete Interrupt management ******************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_BT) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_BT) != 0U) + { + /* Clear the block transfer complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BT); + + if(hmdma->XferBlockCpltCallback != NULL) + { + /* Block transfer callback */ + hmdma->XferBlockCpltCallback(hmdma); + } + } + } + + /* Repeated Block Transfer Complete Interrupt management ******************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_BRT) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_BRT) != 0U) + { + /* Clear the repeat block transfer complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_BRT); + + if(hmdma->XferRepeatBlockCpltCallback != NULL) + { + /* Repeated Block transfer callback */ + hmdma->XferRepeatBlockCpltCallback(hmdma); + } + } + } + + /* Channel Transfer Complete Interrupt management ***********************************/ + if((__HAL_MDMA_GET_FLAG(hmdma, MDMA_FLAG_CTC) != 0U)) + { + if(__HAL_MDMA_GET_IT_SOURCE(hmdma, MDMA_IT_CTC) != 0U) + { + /* Disable all the transfer interrupts */ + __HAL_MDMA_DISABLE_IT(hmdma, (MDMA_IT_TE | MDMA_IT_CTC | MDMA_IT_BT | MDMA_IT_BRT | MDMA_IT_BFTC)); + + if(HAL_MDMA_STATE_ABORT == hmdma->State) + { + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change the DMA state */ + hmdma->State = HAL_MDMA_STATE_READY; + + if(hmdma->XferAbortCallback != NULL) + { + hmdma->XferAbortCallback(hmdma); + } + return; + } + + /* Clear the Channel Transfer Complete flag */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_CTC); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + /* Change MDMA peripheral state */ + hmdma->State = HAL_MDMA_STATE_READY; + + if(hmdma->XferCpltCallback != NULL) + { + /* Channel Transfer Complete callback */ + hmdma->XferCpltCallback(hmdma); + } + } + } + + /* manage error case */ + if(hmdma->ErrorCode != HAL_MDMA_ERROR_NONE) + { + hmdma->State = HAL_MDMA_STATE_ABORT; + + /* Disable the channel */ + __HAL_MDMA_DISABLE(hmdma); + + do + { + if (++count > timeout) + { + break; + } + } + while((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U); + + /* Process Unlocked */ + __HAL_UNLOCK(hmdma); + + if((hmdma->Instance->CCR & MDMA_CCR_EN) != 0U) + { + /* Change the MDMA state to error if MDMA disable fails */ + hmdma->State = HAL_MDMA_STATE_ERROR; + } + else + { + /* Change the MDMA state to Ready if MDMA disable success */ + hmdma->State = HAL_MDMA_STATE_READY; + } + + + if (hmdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hmdma->XferErrorCallback(hmdma); + } + } +} + +/** + * @} + */ + +/** @addtogroup MDMA_Exported_Functions_Group4 + * +@verbatim + =============================================================================== + ##### State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the MDMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Returns the MDMA state. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval HAL state + */ +HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma) +{ + return hmdma->State; +} + +/** + * @brief Return the MDMA error code + * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval MDMA Error Code + */ +uint32_t HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma) +{ + return hmdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup MDMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the MDMA Transfer parameter. + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @param SrcAddress: The source memory Buffer address + * @param DstAddress: The destination memory Buffer address + * @param BlockDataLength : The length of a block transfer in bytes + * @param BlockCount: The number of blocks to be transferred + * @retval HAL status + */ +static void MDMA_SetConfig(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount) +{ + uint32_t addressMask; + + /* Configure the MDMA Channel data length */ + MODIFY_REG(hmdma->Instance->CBNDTR ,MDMA_CBNDTR_BNDT, (BlockDataLength & MDMA_CBNDTR_BNDT)); + + /* Configure the MDMA block repeat count */ + MODIFY_REG(hmdma->Instance->CBNDTR , MDMA_CBNDTR_BRC , ((BlockCount - 1U) << MDMA_CBNDTR_BRC_Pos) & MDMA_CBNDTR_BRC); + + /* Clear all interrupt flags */ + __HAL_MDMA_CLEAR_FLAG(hmdma, MDMA_FLAG_TE | MDMA_FLAG_CTC | MDMA_CISR_BRTIF | MDMA_CISR_BTIF | MDMA_CISR_TCIF); + + /* Configure MDMA Channel destination address */ + hmdma->Instance->CDAR = DstAddress; + + /* Configure MDMA Channel Source address */ + hmdma->Instance->CSAR = SrcAddress; + + addressMask = SrcAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHBSbus is used as source (read operation) on channel x */ + hmdma->Instance->CTBR |= MDMA_CTBR_SBUS; + } + else + { + /*The AXI bus is used as source (read operation) on channel x */ + hmdma->Instance->CTBR &= (~MDMA_CTBR_SBUS); + } + + addressMask = DstAddress & 0xFF000000U; + if((addressMask == 0x20000000U) || (addressMask == 0x00000000U)) + { + /*The AHB bus is used as destination (write operation) on channel x */ + hmdma->Instance->CTBR |= MDMA_CTBR_DBUS; + } + else + { + /*The AXI bus is used as destination (write operation) on channel x */ + hmdma->Instance->CTBR &= (~MDMA_CTBR_DBUS); + } + + /* Set the linked list register to the first node of the list */ + hmdma->Instance->CLAR = (uint32_t)hmdma->FirstLinkedListNodeAddress; +} + +/** + * @brief Initializes the MDMA handle according to the specified + * parameters in the MDMA_InitTypeDef + * @param hmdma: pointer to a MDMA_HandleTypeDef structure that contains + * the configuration information for the specified MDMA Channel. + * @retval None + */ +static void MDMA_Init(MDMA_HandleTypeDef *hmdma) +{ + uint32_t blockoffset; + + /* Prepare the MDMA Channel configuration */ + hmdma->Instance->CCR = hmdma->Init.Priority | hmdma->Init.Endianness; + + /* Write new CTCR Register value */ + hmdma->Instance->CTCR = hmdma->Init.SourceInc | hmdma->Init.DestinationInc | \ + hmdma->Init.SourceDataSize | hmdma->Init.DestDataSize | \ + hmdma->Init.DataAlignment | hmdma->Init.SourceBurst | \ + hmdma->Init.DestBurst | \ + ((hmdma->Init.BufferTransferLength - 1U) << MDMA_CTCR_TLEN_Pos) | \ + hmdma->Init.TransferTriggerMode; + + /* If SW request set the CTCR register to SW Request Mode */ + if(hmdma->Init.Request == MDMA_REQUEST_SW) + { + /* + -If the request is done by SW : BWM could be set to 1 or 0. + -If the request is done by a peripheral : + If mask address not set (0) => BWM must be set to 0 + If mask address set (different than 0) => BWM could be set to 1 or 0 + */ + hmdma->Instance->CTCR |= (MDMA_CTCR_SWRM | MDMA_CTCR_BWM); + } + + /* Reset CBNDTR Register */ + hmdma->Instance->CBNDTR = 0; + + /* if block source address offset is negative set the Block Repeat Source address Update Mode to decrement */ + if(hmdma->Init.SourceBlockAddressOffset < 0) + { + hmdma->Instance->CBNDTR |= MDMA_CBNDTR_BRSUM; + /* Write new CBRUR Register value : source repeat block offset */ + blockoffset = (uint32_t)(- hmdma->Init.SourceBlockAddressOffset); + hmdma->Instance->CBRUR = (blockoffset & 0x0000FFFFU); + } + else + { + /* Write new CBRUR Register value : source repeat block offset */ + hmdma->Instance->CBRUR = (((uint32_t)hmdma->Init.SourceBlockAddressOffset) & 0x0000FFFFU); + } + + /* If block destination address offset is negative set the Block Repeat destination address Update Mode to decrement */ + if(hmdma->Init.DestBlockAddressOffset < 0) + { + hmdma->Instance->CBNDTR |= MDMA_CBNDTR_BRDUM; + /* Write new CBRUR Register value : destination repeat block offset */ + blockoffset = (uint32_t)(- hmdma->Init.DestBlockAddressOffset); + hmdma->Instance->CBRUR |= ((blockoffset & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + else + { + /*write new CBRUR Register value : destination repeat block offset */ + hmdma->Instance->CBRUR |= ((((uint32_t)hmdma->Init.DestBlockAddressOffset) & 0x0000FFFFU) << MDMA_CBRUR_DUV_Pos); + } + + /* if HW request set the HW request and the requet CleraMask and ClearData MaskData, */ + if(hmdma->Init.Request != MDMA_REQUEST_SW) + { + /* Set the HW request in CTRB register */ + hmdma->Instance->CTBR = hmdma->Init.Request & MDMA_CTBR_TSEL; + } + else /* SW request : reset the CTBR register */ + { + hmdma->Instance->CTBR = 0; + } + + /* Write Link Address Register */ + hmdma->Instance->CLAR = 0; +} + +/** + * @} + */ + +#endif /* HAL_MDMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c new file mode 100644 index 0000000..d009ee1 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_ospi.c @@ -0,0 +1,3165 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_ospi.c + * @author MCD Application Team + * @brief OSPI HAL module driver. + This file provides firmware functions to manage the following + functionalities of the OctoSPI interface (OSPI). + + Initialization and de-initialization functions + + Hyperbus configuration + + Indirect functional mode management + + Memory-mapped functional mode management + + Auto-polling functional mode management + + Interrupts and flags management + + DMA channel configuration for indirect functional mode + + Errors management and abort functionality + + IO manager configuration + + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + *** Initialization *** + ====================== + [..] + As prerequisite, fill in the HAL_OSPI_MspInit() : + (+) Enable OctoSPI and OctoSPIM clocks interface with __HAL_RCC_OSPIx_CLK_ENABLE(). + (+) Reset OctoSPI Peripheral with __HAL_RCC_OSPIx_FORCE_RESET() and __HAL_RCC_OSPIx_RELEASE_RESET(). + (+) Enable the clocks for the OctoSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). + (+) Configure these OctoSPI pins in alternate mode using HAL_GPIO_Init(). + (+) If interrupt or DMA mode is used, enable and configure OctoSPI global + interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + (+) If DMA mode is used, enable the clocks for the OctoSPI DMA channel + with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(), + link it with OctoSPI handle using __HAL_LINKDMA(), enable and configure + DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + [..] + Configure the fifo threshold, the dual-quad mode, the memory type, the + device size, the CS high time, the free running clock, the clock mode, + the wrap size, the clock prescaler, the sample shifting, the hold delay + and the CS boundary using the HAL_OSPI_Init() function. + [..] + When using Hyperbus, configure the RW recovery time, the access time, + the write latency and the latency mode unsing the HAL_OSPI_HyperbusCfg() + function. + + *** Indirect functional mode *** + ================================ + [..] + In regular mode, configure the command sequence using the HAL_OSPI_Command() + or HAL_OSPI_Command_IT() functions : + (+) Instruction phase : the mode used and if present the size, the instruction + opcode and the DTR mode. + (+) Address phase : the mode used and if present the size, the address + value and the DTR mode. + (+) Alternate-bytes phase : the mode used and if present the size, the + alternate bytes values and the DTR mode. + (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase). + (+) Data phase : the mode used and if present the number of bytes and the DTR mode. + (+) Data strobe (DQS) mode : the activation (or not) of this mode + (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode. + (+) Flash identifier : in dual-quad mode, indicates which flash is concerned + (+) Operation type : always common configuration + [..] + In Hyperbus mode, configure the command sequence using the HAL_OSPI_HyperbusCmd() + function : + (+) Address space : indicate if the access will be done in register or memory + (+) Address size + (+) Number of data + (+) Data strobe (DQS) mode : the activation (or not) of this mode + [..] + If no data is required for the command (only for regular mode, not for + Hyperbus mode), it is sent directly to the memory : + (+) In polling mode, the output of the function is done when the transfer is complete. + (+) In interrupt mode, HAL_OSPI_CmdCpltCallback() will be called when the transfer is complete. + [..] + For the indirect write mode, use HAL_OSPI_Transmit(), HAL_OSPI_Transmit_DMA() or + HAL_OSPI_Transmit_IT() after the command configuration : + (+) In polling mode, the output of the function is done when the transfer is complete. + (+) In interrupt mode, HAL_OSPI_FifoThresholdCallback() will be called when the fifo threshold + is reached and HAL_OSPI_TxCpltCallback() will be called when the transfer is complete. + (+) In DMA mode, HAL_OSPI_TxHalfCpltCallback() will be called at the half transfer and + HAL_OSPI_TxCpltCallback() will be called when the transfer is complete. + [..] + For the indirect read mode, use HAL_OSPI_Receive(), HAL_OSPI_Receive_DMA() or + HAL_OSPI_Receive_IT() after the command configuration : + (+) In polling mode, the output of the function is done when the transfer is complete. + (+) In interrupt mode, HAL_OSPI_FifoThresholdCallback() will be called when the fifo threshold + is reached and HAL_OSPI_RxCpltCallback() will be called when the transfer is complete. + (+) In DMA mode, HAL_OSPI_RxHalfCpltCallback() will be called at the half transfer and + HAL_OSPI_RxCpltCallback() will be called when the transfer is complete. + + *** Auto-polling functional mode *** + ==================================== + [..] + Configure the command sequence by the same way than the indirect mode + [..] + Configure the auto-polling functional mode using the HAL_OSPI_AutoPolling() + or HAL_OSPI_AutoPolling_IT() functions : + (+) The size of the status bytes, the match value, the mask used, the match mode (OR/AND), + the polling interval and the automatic stop activation. + [..] + After the configuration : + (+) In polling mode, the output of the function is done when the status match is reached. The + automatic stop is activated to avoid an infinite loop. + (+) In interrupt mode, HAL_OSPI_StatusMatchCallback() will be called each time the status match is reached. + + *** MDMA functional mode *** + ==================================== + [..] + Configure the SourceInc and DestinationInc of MDMA parameters in the HAL_OSPI_MspInit() function : + (+) MDMA settings for write operation : + (++) The DestinationInc should be MDMA_DEST_INC_DISABLE + (++) The SourceInc must be a value of @ref MDMA_Source_increment_mode (Except the MDMA_SRC_INC_DOUBLEWORD). + (++) The SourceDataSize must be a value of @ref MDMA Source data size (Except the MDMA_SRC_DATASIZE_DOUBLEWORD) + aligned with @ref MDMA_Source_increment_mode . + (++) The DestDataSize must be a value of @ref MDMA Destination data size (Except the MDMA_DEST_DATASIZE_DOUBLEWORD) + (+) MDMA settings for read operation : + (++) The SourceInc should be MDMA_SRC_INC_DISABLE + (++) The DestinationInc must be a value of @ref MDMA_Destination_increment_mode (Except the MDMA_DEST_INC_DOUBLEWORD). + (++) The SourceDataSize must be a value of @ref MDMA Source data size (Except the MDMA_SRC_DATASIZE_DOUBLEWORD) . + (++) The DestDataSize must be a value of @ref MDMA Destination data size (Except the MDMA_DEST_DATASIZE_DOUBLEWORD) + aligned with @ref MDMA_Destination_increment_mode. + (+) The buffer Transfer Length (BufferTransferLength) = number of bytes in the FIFO (FifoThreshold) of the Octospi. + [..] + In case of wrong MDMA setting + (+) For write operation : + (++) If the DestinationInc is different to MDMA_DEST_INC_DISABLE , it will be disabled by the HAL_OSPI_Transmit_DMA(). + (+) For read operation : + (++) If the SourceInc is not set to MDMA_SRC_INC_DISABLE , it will be disabled by the HAL_OSPI_Receive_DMA(). + + *** Memory-mapped functional mode *** + ===================================== + [..] + Configure the command sequence by the same way than the indirect mode except + for the operation type in regular mode : + (+) Operation type equals to read configuration : the command configuration + applies to read access in memory-mapped mode + (+) Operation type equals to write configuration : the command configuration + applies to write access in memory-mapped mode + (+) Both read and write configuration should be performed before activating + memory-mapped mode + [..] + Configure the memory-mapped functional mode using the HAL_OSPI_MemoryMapped() + functions : + (+) The timeout activation and the timeout period. + [..] + After the configuration, the OctoSPI will be used as soon as an access on the AHB is done on + the address range. HAL_OSPI_TimeOutCallback() will be called when the timeout expires. + + *** Errors management and abort functionality *** + ================================================= + [..] + HAL_OSPI_GetError() function gives the error raised during the last operation. + [..] + HAL_OSPI_Abort() and HAL_OSPI_AbortIT() functions aborts any on-going operation and + flushes the fifo : + (+) In polling mode, the output of the function is done when the transfer + complete bit is set and the busy bit cleared. + (+) In interrupt mode, HAL_OSPI_AbortCpltCallback() will be called when + the transfer complete bit is set. + + *** Control functions *** + ========================= + [..] + HAL_OSPI_GetState() function gives the current state of the HAL OctoSPI driver. + [..] + HAL_OSPI_SetTimeout() function configures the timeout value used in the driver. + [..] + HAL_OSPI_SetFifoThreshold() function configures the threshold on the Fifo of the OSPI Peripheral. + [..] + HAL_OSPI_GetFifoThreshold() function gives the current of the Fifo's threshold + + *** IO manager configuration functions *** + ========================================== + [..] + HAL_OSPIM_Config() function configures the IO manager for the OctoSPI instance. + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_OSPI_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use function HAL_OSPI_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) FifoThresholdCallback : callback when the fifo threshold is reached. + (+) CmdCpltCallback : callback when a command without data is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxHalfCpltCallback : callback when half of the reception transfer is completed. + (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed. + (+) StatusMatchCallback : callback when a status match occurs. + (+) TimeOutCallback : callback when the timeout perioed expires. + (+) MspInitCallback : OSPI MspInit. + (+) MspDeInitCallback : OSPI MspDeInit. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_OSPI_UnRegisterCallback() to reset a callback to the default + weak (surcharged) function. It allows to reset following callbacks: + (+) ErrorCallback : callback when error occurs. + (+) AbortCpltCallback : callback when abort is completed. + (+) FifoThresholdCallback : callback when the fifo threshold is reached. + (+) CmdCpltCallback : callback when a command without data is completed. + (+) RxCpltCallback : callback when a reception transfer is completed. + (+) TxCpltCallback : callback when a transmission transfer is completed. + (+) RxHalfCpltCallback : callback when half of the reception transfer is completed. + (+) TxHalfCpltCallback : callback when half of the transmission transfer is completed. + (+) StatusMatchCallback : callback when a status match occurs. + (+) TimeOutCallback : callback when the timeout perioed expires. + (+) MspInitCallback : OSPI MspInit. + (+) MspDeInitCallback : OSPI MspDeInit. + [..] + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + [..] + By default, after the HAL_OSPI_Init() and if the state is HAL_OSPI_STATE_RESET + all callbacks are reset to the corresponding legacy weak (surcharged) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (surcharged) functions in the HAL_OSPI_Init() + and HAL_OSPI_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_OSPI_Init() and HAL_OSPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + [..] + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_OSPI_RegisterCallback() before calling HAL_OSPI_DeInit() + or HAL_OSPI_Init() function. + + [..] + When The compilation define USE_HAL_OSPI_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +#if defined(OCTOSPI) || defined(OCTOSPI1) || defined(OCTOSPI2) + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup OSPI OSPI + * @brief OSPI HAL module driver + * @{ + */ + +#ifdef HAL_OSPI_MODULE_ENABLED + +/** + @cond 0 + */ +/* Private typedef -----------------------------------------------------------*/ + +/* Private define ------------------------------------------------------------*/ +#define OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000) /*!< Indirect write mode */ +#define OSPI_FUNCTIONAL_MODE_INDIRECT_READ ((uint32_t)OCTOSPI_CR_FMODE_0) /*!< Indirect read mode */ +#define OSPI_FUNCTIONAL_MODE_AUTO_POLLING ((uint32_t)OCTOSPI_CR_FMODE_1) /*!< Automatic polling mode */ +#define OSPI_FUNCTIONAL_MODE_MEMORY_MAPPED ((uint32_t)OCTOSPI_CR_FMODE) /*!< Memory-mapped mode */ + +#define OSPI_CFG_STATE_MASK 0x00000004U +#define OSPI_BUSY_STATE_MASK 0x00000008U + +#define OSPI_NB_INSTANCE 2U +#define OSPI_IOM_NB_PORTS 2U +#define OSPI_IOM_PORT_MASK 0x1U + +/* Private macro -------------------------------------------------------------*/ +#define IS_OSPI_FUNCTIONAL_MODE(MODE) (((MODE) == OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \ + ((MODE) == OSPI_FUNCTIONAL_MODE_INDIRECT_READ) || \ + ((MODE) == OSPI_FUNCTIONAL_MODE_AUTO_POLLING) || \ + ((MODE) == OSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)) + +/* Private variables ---------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ +static void OSPI_DMACplt (MDMA_HandleTypeDef *hmdma); +static void OSPI_DMAError (MDMA_HandleTypeDef *hmdma); +static void OSPI_DMAAbortCplt (MDMA_HandleTypeDef *hmdma); +static HAL_StatusTypeDef OSPI_WaitFlagStateUntilTimeout(OSPI_HandleTypeDef *hospi, uint32_t Flag, FlagStatus State, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef OSPI_ConfigCmd (OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd); +static HAL_StatusTypeDef OSPIM_GetConfig (uint8_t instance_nb, OSPIM_CfgTypeDef *cfg); +/** + @endcond + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup OSPI_Exported_Functions OSPI Exported Functions + * @{ + */ + +/** @defgroup OSPI_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Initialize the OctoSPI. + (+) De-initialize the OctoSPI. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the OSPI mode according to the specified parameters + * in the OSPI_InitTypeDef and initialize the associated handle. + * @param hospi : OSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Init (OSPI_HandleTypeDef *hospi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart = HAL_GetTick(); + + /* Check the OSPI handle allocation */ + if (hospi == NULL) + { + status = HAL_ERROR; + /* No error code can be set set as the handler is null */ + } + else + { + /* Check the parameters of the initialization structure */ + assert_param(IS_OSPI_FIFO_THRESHOLD (hospi->Init.FifoThreshold)); + assert_param(IS_OSPI_DUALQUAD_MODE (hospi->Init.DualQuad)); + assert_param(IS_OSPI_MEMORY_TYPE (hospi->Init.MemoryType)); + assert_param(IS_OSPI_DEVICE_SIZE (hospi->Init.DeviceSize)); + assert_param(IS_OSPI_CS_HIGH_TIME (hospi->Init.ChipSelectHighTime)); + assert_param(IS_OSPI_FREE_RUN_CLK (hospi->Init.FreeRunningClock)); + assert_param(IS_OSPI_CLOCK_MODE (hospi->Init.ClockMode)); + assert_param(IS_OSPI_WRAP_SIZE (hospi->Init.WrapSize)); + assert_param(IS_OSPI_CLK_PRESCALER (hospi->Init.ClockPrescaler)); + assert_param(IS_OSPI_SAMPLE_SHIFTING(hospi->Init.SampleShifting)); + assert_param(IS_OSPI_DHQC (hospi->Init.DelayHoldQuarterCycle)); + assert_param(IS_OSPI_CS_BOUNDARY (hospi->Init.ChipSelectBoundary)); + assert_param(IS_OSPI_DLYBYP (hospi->Init.DelayBlockBypass)); + assert_param(IS_OSPI_MAXTRAN (hospi->Init.MaxTran)); + + /* Initialize error code */ + hospi->ErrorCode = HAL_OSPI_ERROR_NONE; + + /* Check if the state is the reset state */ + if (hospi->State == HAL_OSPI_STATE_RESET) + { +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + /* Reset Callback pointers in HAL_OSPI_STATE_RESET only */ + hospi->ErrorCallback = HAL_OSPI_ErrorCallback; + hospi->AbortCpltCallback = HAL_OSPI_AbortCpltCallback; + hospi->FifoThresholdCallback = HAL_OSPI_FifoThresholdCallback; + hospi->CmdCpltCallback = HAL_OSPI_CmdCpltCallback; + hospi->RxCpltCallback = HAL_OSPI_RxCpltCallback; + hospi->TxCpltCallback = HAL_OSPI_TxCpltCallback; + hospi->RxHalfCpltCallback = HAL_OSPI_RxHalfCpltCallback; + hospi->TxHalfCpltCallback = HAL_OSPI_TxHalfCpltCallback; + hospi->StatusMatchCallback = HAL_OSPI_StatusMatchCallback; + hospi->TimeOutCallback = HAL_OSPI_TimeOutCallback; + + if(hospi->MspInitCallback == NULL) + { + hospi->MspInitCallback = HAL_OSPI_MspInit; + } + + /* Init the low level hardware */ + hospi->MspInitCallback(hospi); +#else + /* Initialization of the low level hardware */ + HAL_OSPI_MspInit(hospi); +#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + + /* Configure the default timeout for the OSPI memory access */ + (void)HAL_OSPI_SetTimeout(hospi, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + /* Configure memory type, device size, chip select high time, delay block bypass, + free running clock, clock mode */ + MODIFY_REG(hospi->Instance->DCR1, + (OCTOSPI_DCR1_MTYP | OCTOSPI_DCR1_DEVSIZE | OCTOSPI_DCR1_CSHT | OCTOSPI_DCR1_DLYBYP | + OCTOSPI_DCR1_FRCK | OCTOSPI_DCR1_CKMODE), + (hospi->Init.MemoryType | ((hospi->Init.DeviceSize - 1U) << OCTOSPI_DCR1_DEVSIZE_Pos) | + ((hospi->Init.ChipSelectHighTime - 1U) << OCTOSPI_DCR1_CSHT_Pos) | + hospi->Init.DelayBlockBypass | hospi->Init.ClockMode)); + + /* Configure wrap size */ + MODIFY_REG(hospi->Instance->DCR2, OCTOSPI_DCR2_WRAPSIZE, hospi->Init.WrapSize); + + /* Configure chip select boundary and maximum transfer */ + hospi->Instance->DCR3 = ((hospi->Init.ChipSelectBoundary << OCTOSPI_DCR3_CSBOUND_Pos) | + (hospi->Init.MaxTran << OCTOSPI_DCR3_MAXTRAN_Pos)); + + /* Configure refresh */ + hospi->Instance->DCR4 = hospi->Init.Refresh; + + /* Configure FIFO threshold */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FTHRES, ((hospi->Init.FifoThreshold - 1U) << OCTOSPI_CR_FTHRES_Pos)); + + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout); + + if (status == HAL_OK) + { + /* Configure clock prescaler */ + MODIFY_REG(hospi->Instance->DCR2, OCTOSPI_DCR2_PRESCALER, + ((hospi->Init.ClockPrescaler - 1U) << OCTOSPI_DCR2_PRESCALER_Pos)); + + /* Configure Dual Quad mode */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_DQM, hospi->Init.DualQuad); + + /* Configure sample shifting and delay hold quarter cycle */ + MODIFY_REG(hospi->Instance->TCR, (OCTOSPI_TCR_SSHIFT | OCTOSPI_TCR_DHQC), + (hospi->Init.SampleShifting | hospi->Init.DelayHoldQuarterCycle)); + + /* Enable OctoSPI */ + __HAL_OSPI_ENABLE(hospi); + + /* Enable free running clock if needed : must be done after OSPI enable */ + if (hospi->Init.FreeRunningClock == HAL_OSPI_FREERUNCLK_ENABLE) + { + SET_BIT(hospi->Instance->DCR1, OCTOSPI_DCR1_FRCK); + } + + /* Initialize the OSPI state */ + if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS) + { + hospi->State = HAL_OSPI_STATE_HYPERBUS_INIT; + } + else + { + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Initialize the OSPI MSP. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_MspInit(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_OSPI_MspInit can be implemented in the user file + */ +} + +/** + * @brief De-Initialize the OSPI peripheral. + * @param hospi : OSPI handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_DeInit(OSPI_HandleTypeDef *hospi) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the OSPI handle allocation */ + if (hospi == NULL) + { + status = HAL_ERROR; + /* No error code can be set set as the handler is null */ + } + else + { + /* Disable OctoSPI */ + __HAL_OSPI_DISABLE(hospi); + + /* Disable free running clock if needed : must be done after OSPI disable */ + CLEAR_BIT(hospi->Instance->DCR1, OCTOSPI_DCR1_FRCK); + +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + if(hospi->MspDeInitCallback == NULL) + { + hospi->MspDeInitCallback = HAL_OSPI_MspDeInit; + } + + /* DeInit the low level hardware */ + hospi->MspDeInitCallback(hospi); +#else + /* De-initialize the low-level hardware */ + HAL_OSPI_MspDeInit(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + + /* Reset the driver state */ + hospi->State = HAL_OSPI_STATE_RESET; + } + + return status; +} + +/** + * @brief DeInitialize the OSPI MSP. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_OSPI_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup OSPI_Exported_Functions_Group2 Input and Output operation functions + * @brief OSPI Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Handle the interrupts. + (+) Handle the command sequence (regular and Hyperbus). + (+) Handle the Hyperbus configuration. + (+) Transmit data in blocking, interrupt or DMA mode. + (+) Receive data in blocking, interrupt or DMA mode. + (+) Manage the auto-polling functional mode. + (+) Manage the memory-mapped functional mode. + +@endverbatim + * @{ + */ + +/** + * @brief Handle OSPI interrupt request. + * @param hospi : OSPI handle + * @retval None + */ +void HAL_OSPI_IRQHandler(OSPI_HandleTypeDef *hospi) +{ + __IO uint32_t *data_reg = &hospi->Instance->DR; + uint32_t flag = hospi->Instance->SR; + uint32_t itsource = hospi->Instance->CR; + uint32_t currentstate = hospi->State; + + /* OctoSPI fifo threshold interrupt occurred -------------------------------*/ + if (((flag & HAL_OSPI_FLAG_FT) != 0U) && ((itsource & HAL_OSPI_IT_FT) != 0U)) + { + if (currentstate == HAL_OSPI_STATE_BUSY_TX) + { + /* Write a data in the fifo */ + *((__IO uint8_t *)data_reg) = *hospi->pBuffPtr; + hospi->pBuffPtr++; + hospi->XferCount--; + } + else if (currentstate == HAL_OSPI_STATE_BUSY_RX) + { + /* Read a data from the fifo */ + *hospi->pBuffPtr = *((__IO uint8_t *)data_reg); + hospi->pBuffPtr++; + hospi->XferCount--; + } + else + { + /* Nothing to do */ + } + + if (hospi->XferCount == 0U) + { + /* All data have been received or transmitted for the transfer */ + /* Disable fifo threshold interrupt */ + __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_FT); + } + + /* Fifo threshold callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->FifoThresholdCallback(hospi); +#else + HAL_OSPI_FifoThresholdCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/ + } + /* OctoSPI transfer complete interrupt occurred ----------------------------*/ + else if (((flag & HAL_OSPI_FLAG_TC) != 0U) && ((itsource & HAL_OSPI_IT_TC) != 0U)) + { + if (currentstate == HAL_OSPI_STATE_BUSY_RX) + { + if ((hospi->XferCount > 0U) && ((flag & OCTOSPI_SR_FLEVEL) != 0U)) + { + /* Read the last data received in the fifo */ + *hospi->pBuffPtr = *((__IO uint8_t *)data_reg); + hospi->pBuffPtr++; + hospi->XferCount--; + } + else if(hospi->XferCount == 0U) + { + /* Clear flag */ + hospi->Instance->FCR = HAL_OSPI_FLAG_TC; + + /* Disable the interrupts */ + __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* RX complete callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->RxCpltCallback(hospi); +#else + HAL_OSPI_RxCpltCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + else + { + /* Nothing to do */ + } + } + else + { + /* Clear flag */ + hospi->Instance->FCR = HAL_OSPI_FLAG_TC; + + /* Disable the interrupts */ + __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + if (currentstate == HAL_OSPI_STATE_BUSY_TX) + { + /* TX complete callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->TxCpltCallback(hospi); +#else + HAL_OSPI_TxCpltCallback(hospi); +#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + else if (currentstate == HAL_OSPI_STATE_BUSY_CMD) + { + /* Command complete callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->CmdCpltCallback(hospi); +#else + HAL_OSPI_CmdCpltCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + else if (currentstate == HAL_OSPI_STATE_ABORT) + { + if (hospi->ErrorCode == HAL_OSPI_ERROR_NONE) + { + /* Abort called by the user */ + /* Abort complete callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->AbortCpltCallback(hospi); +#else + HAL_OSPI_AbortCpltCallback(hospi); +#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/ + } + else + { + /* Abort due to an error (eg : DMA error) */ + /* Error callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->ErrorCallback(hospi); +#else + HAL_OSPI_ErrorCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + } + else + { + /* Nothing to do */ + } + } + } + /* OctoSPI status match interrupt occurred ---------------------------------*/ + else if (((flag & HAL_OSPI_FLAG_SM) != 0U) && ((itsource & HAL_OSPI_IT_SM) != 0U)) + { + /* Clear flag */ + hospi->Instance->FCR = HAL_OSPI_FLAG_SM; + + /* Check if automatic poll mode stop is activated */ + if ((hospi->Instance->CR & OCTOSPI_CR_APMS) != 0U) + { + /* Disable the interrupts */ + __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_SM | HAL_OSPI_IT_TE); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + } + + /* Status match callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->StatusMatchCallback(hospi); +#else + HAL_OSPI_StatusMatchCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + /* OctoSPI transfer error interrupt occurred -------------------------------*/ + else if (((flag & HAL_OSPI_FLAG_TE) != 0U) && ((itsource & HAL_OSPI_IT_TE) != 0U)) + { + /* Clear flag */ + hospi->Instance->FCR = HAL_OSPI_FLAG_TE; + + /* Disable all interrupts */ + __HAL_OSPI_DISABLE_IT(hospi, (HAL_OSPI_IT_TO | HAL_OSPI_IT_SM | HAL_OSPI_IT_FT | HAL_OSPI_IT_TC | HAL_OSPI_IT_TE)); + + /* Set error code */ + hospi->ErrorCode = HAL_OSPI_ERROR_TRANSFER; + + /* Check if the DMA is enabled */ + if ((hospi->Instance->CR & OCTOSPI_CR_DMAEN) != 0U) + { + /* Disable the DMA transfer on the OctoSPI side */ + CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN); + + /* Disable the DMA transfer on the DMA side */ + hospi->hmdma->XferAbortCallback = OSPI_DMAAbortCplt; + if (HAL_MDMA_Abort_IT(hospi->hmdma) != HAL_OK) + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->ErrorCallback(hospi); +#else + HAL_OSPI_ErrorCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/ + } + } + else + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->ErrorCallback(hospi); +#else + HAL_OSPI_ErrorCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + } + /* OctoSPI timeout interrupt occurred --------------------------------------*/ + else if (((flag & HAL_OSPI_FLAG_TO) != 0U) && ((itsource & HAL_OSPI_IT_TO) != 0U)) + { + /* Clear flag */ + hospi->Instance->FCR = HAL_OSPI_FLAG_TO; + + /* Timeout callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->TimeOutCallback(hospi); +#else + HAL_OSPI_TimeOutCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief Set the command configuration. + * @param hospi : OSPI handle + * @param cmd : structure that contains the command configuration information + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Command(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t state; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the command structure */ + assert_param(IS_OSPI_OPERATION_TYPE(cmd->OperationType)); + + if (hospi->Init.DualQuad == HAL_OSPI_DUALQUAD_DISABLE) + { + assert_param(IS_OSPI_FLASH_ID(cmd->FlashId)); + } + + assert_param(IS_OSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE) + { + assert_param(IS_OSPI_INSTRUCTION_SIZE (cmd->InstructionSize)); + assert_param(IS_OSPI_INSTRUCTION_DTR_MODE(cmd->InstructionDtrMode)); + } + + assert_param(IS_OSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE) + { + assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize)); + assert_param(IS_OSPI_ADDRESS_DTR_MODE(cmd->AddressDtrMode)); + } + + assert_param(IS_OSPI_ALT_BYTES_MODE(cmd->AlternateBytesMode)); + if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_OSPI_ALT_BYTES_SIZE (cmd->AlternateBytesSize)); + assert_param(IS_OSPI_ALT_BYTES_DTR_MODE(cmd->AlternateBytesDtrMode)); + } + + assert_param(IS_OSPI_DATA_MODE(cmd->DataMode)); + if (cmd->DataMode != HAL_OSPI_DATA_NONE) + { + if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG) + { + assert_param(IS_OSPI_NUMBER_DATA (cmd->NbData)); + } + assert_param(IS_OSPI_DATA_DTR_MODE(cmd->DataDtrMode)); + assert_param(IS_OSPI_DUMMY_CYCLES (cmd->DummyCycles)); + } + + assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode)); + assert_param(IS_OSPI_SIOO_MODE(cmd->SIOOMode)); + + /* Check the state of the driver */ + state = hospi->State; + if (((state == HAL_OSPI_STATE_READY) && (hospi->Init.MemoryType != HAL_OSPI_MEMTYPE_HYPERBUS)) || + ((state == HAL_OSPI_STATE_READ_CMD_CFG) && ((cmd->OperationType == HAL_OSPI_OPTYPE_WRITE_CFG) + || (cmd->OperationType == HAL_OSPI_OPTYPE_WRAP_CFG))) || + ((state == HAL_OSPI_STATE_WRITE_CMD_CFG) && ((cmd->OperationType == HAL_OSPI_OPTYPE_READ_CFG) || + (cmd->OperationType == HAL_OSPI_OPTYPE_WRAP_CFG)))) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Initialize error code */ + hospi->ErrorCode = HAL_OSPI_ERROR_NONE; + + /* Configure the registers */ + status = OSPI_ConfigCmd(hospi, cmd); + + if (status == HAL_OK) + { + if (cmd->DataMode == HAL_OSPI_DATA_NONE) + { + /* When there is no data phase, the transfer start as soon as the configuration is done + so wait until TC flag is set to go back in idle state */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, Timeout); + + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC); + } + else + { + /* Update the state */ + if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG) + { + hospi->State = HAL_OSPI_STATE_CMD_CFG; + } + else if (cmd->OperationType == HAL_OSPI_OPTYPE_READ_CFG) + { + if (hospi->State == HAL_OSPI_STATE_WRITE_CMD_CFG) + { + hospi->State = HAL_OSPI_STATE_CMD_CFG; + } + else + { + hospi->State = HAL_OSPI_STATE_READ_CMD_CFG; + } + } + else if (cmd->OperationType == HAL_OSPI_OPTYPE_WRITE_CFG) + { + if (hospi->State == HAL_OSPI_STATE_READ_CMD_CFG) + { + hospi->State = HAL_OSPI_STATE_CMD_CFG; + } + else + { + hospi->State = HAL_OSPI_STATE_WRITE_CMD_CFG; + } + } + else + { + /* Wrap configuration, no state change */ + } + } + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Set the command configuration in interrupt mode. + * @param hospi : OSPI handle + * @param cmd : structure that contains the command configuration information + * @note This function is used only in Indirect Read or Write Modes + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Command_IT(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the command structure */ + assert_param(IS_OSPI_OPERATION_TYPE(cmd->OperationType)); + + if (hospi->Init.DualQuad == HAL_OSPI_DUALQUAD_DISABLE) + { + assert_param(IS_OSPI_FLASH_ID(cmd->FlashId)); + } + + assert_param(IS_OSPI_INSTRUCTION_MODE(cmd->InstructionMode)); + if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE) + { + assert_param(IS_OSPI_INSTRUCTION_SIZE (cmd->InstructionSize)); + assert_param(IS_OSPI_INSTRUCTION_DTR_MODE(cmd->InstructionDtrMode)); + } + + assert_param(IS_OSPI_ADDRESS_MODE(cmd->AddressMode)); + if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE) + { + assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize)); + assert_param(IS_OSPI_ADDRESS_DTR_MODE(cmd->AddressDtrMode)); + } + + assert_param(IS_OSPI_ALT_BYTES_MODE(cmd->AlternateBytesMode)); + if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE) + { + assert_param(IS_OSPI_ALT_BYTES_SIZE (cmd->AlternateBytesSize)); + assert_param(IS_OSPI_ALT_BYTES_DTR_MODE(cmd->AlternateBytesDtrMode)); + } + + assert_param(IS_OSPI_DATA_MODE(cmd->DataMode)); + if (cmd->DataMode != HAL_OSPI_DATA_NONE) + { + assert_param(IS_OSPI_NUMBER_DATA (cmd->NbData)); + assert_param(IS_OSPI_DATA_DTR_MODE(cmd->DataDtrMode)); + assert_param(IS_OSPI_DUMMY_CYCLES (cmd->DummyCycles)); + } + + assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode)); + assert_param(IS_OSPI_SIOO_MODE(cmd->SIOOMode)); + + /* Check the state of the driver */ + if ((hospi->State == HAL_OSPI_STATE_READY) && (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG) && + (cmd->DataMode == HAL_OSPI_DATA_NONE) && (hospi->Init.MemoryType != HAL_OSPI_MEMTYPE_HYPERBUS)) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout); + + if (status == HAL_OK) + { + /* Initialize error code */ + hospi->ErrorCode = HAL_OSPI_ERROR_NONE; + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC); + + /* Configure the registers */ + status = OSPI_ConfigCmd(hospi, cmd); + + if (status == HAL_OK) + { + /* Update the state */ + hospi->State = HAL_OSPI_STATE_BUSY_CMD; + + /* Enable the transfer complete and transfer error interrupts */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_TE); + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the Hyperbus parameters. + * @param hospi : OSPI handle + * @param cfg : Structure containing the Hyperbus configuration + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_HyperbusCfg(OSPI_HandleTypeDef *hospi, OSPI_HyperbusCfgTypeDef *cfg, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t state; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the hyperbus configuration structure */ + assert_param(IS_OSPI_RW_RECOVERY_TIME (cfg->RWRecoveryTime)); + assert_param(IS_OSPI_ACCESS_TIME (cfg->AccessTime)); + assert_param(IS_OSPI_WRITE_ZERO_LATENCY(cfg->WriteZeroLatency)); + assert_param(IS_OSPI_LATENCY_MODE (cfg->LatencyMode)); + + /* Check the state of the driver */ + state = hospi->State; + if ((state == HAL_OSPI_STATE_HYPERBUS_INIT) || (state == HAL_OSPI_STATE_READY)) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Configure Hyperbus configuration Latency register */ + WRITE_REG(hospi->Instance->HLCR, ((cfg->RWRecoveryTime << OCTOSPI_HLCR_TRWR_Pos) | + (cfg->AccessTime << OCTOSPI_HLCR_TACC_Pos) | + cfg->WriteZeroLatency | cfg->LatencyMode)); + + /* Update the state */ + hospi->State = HAL_OSPI_STATE_READY; + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Set the Hyperbus command configuration. + * @param hospi : OSPI handle + * @param cmd : Structure containing the Hyperbus command + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_HyperbusCmd(OSPI_HandleTypeDef *hospi, OSPI_HyperbusCmdTypeDef *cmd, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the hyperbus command structure */ + assert_param(IS_OSPI_ADDRESS_SPACE(cmd->AddressSpace)); + assert_param(IS_OSPI_ADDRESS_SIZE (cmd->AddressSize)); + assert_param(IS_OSPI_NUMBER_DATA (cmd->NbData)); + assert_param(IS_OSPI_DQS_MODE (cmd->DQSMode)); + + /* Check the state of the driver */ + if ((hospi->State == HAL_OSPI_STATE_READY) && (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS)) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Re-initialize the value of the functional mode */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, 0U); + + /* Configure the address space in the DCR1 register */ + MODIFY_REG(hospi->Instance->DCR1, OCTOSPI_DCR1_MTYP_0, cmd->AddressSpace); + + /* Configure the CCR and WCCR registers with the address size and the following configuration : + - DQS signal enabled (used as RWDS) + - DTR mode enabled on address and data + - address and data on 8 lines */ + WRITE_REG(hospi->Instance->CCR, (cmd->DQSMode | OCTOSPI_CCR_DDTR | OCTOSPI_CCR_DMODE_2 | + cmd->AddressSize | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADMODE_2)); + WRITE_REG(hospi->Instance->WCCR, (cmd->DQSMode | OCTOSPI_WCCR_DDTR | OCTOSPI_WCCR_DMODE_2 | + cmd->AddressSize | OCTOSPI_WCCR_ADDTR | OCTOSPI_WCCR_ADMODE_2)); + + /* Configure the DLR register with the number of data */ + WRITE_REG(hospi->Instance->DLR, (cmd->NbData - 1U)); + + /* Configure the AR register with the address value */ + WRITE_REG(hospi->Instance->AR, cmd->Address); + + /* Update the state */ + hospi->State = HAL_OSPI_STATE_CMD_CFG; + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hospi : OSPI handle + * @param pData : pointer to data buffer + * @param Timeout : Timeout duration + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Transmit(OSPI_HandleTypeDef *hospi, uint8_t *pData, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + __IO uint32_t *data_reg = &hospi->Instance->DR; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U; + hospi->XferSize = hospi->XferCount; + hospi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect write */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + do + { + /* Wait till fifo threshold flag is set to send data */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_FT, SET, tickstart, Timeout); + + if (status != HAL_OK) + { + break; + } + + *((__IO uint8_t *)data_reg) = *hospi->pBuffPtr; + hospi->pBuffPtr++; + hospi->XferCount--; + } while (hospi->XferCount > 0U); + + if (status == HAL_OK) + { + /* Wait till transfer complete flag is set to go back in idle state */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear transfer complete flag */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hospi : OSPI handle + * @param pData : pointer to data buffer + * @param Timeout : Timeout duration + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Receive(OSPI_HandleTypeDef *hospi, uint8_t *pData, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + __IO uint32_t *data_reg = &hospi->Instance->DR; + uint32_t addr_reg = hospi->Instance->AR; + uint32_t ir_reg = hospi->Instance->IR; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U; + hospi->XferSize = hospi->XferCount; + hospi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect read */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Trig the transfer by re-writing address or instruction register */ + if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hospi->Instance->IR, ir_reg); + } + } + + do + { + /* Wait till fifo threshold or transfer complete flags are set to read received data */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, (HAL_OSPI_FLAG_FT | HAL_OSPI_FLAG_TC), SET, tickstart, Timeout); + + if (status != HAL_OK) + { + break; + } + + *hospi->pBuffPtr = *((__IO uint8_t *)data_reg); + hospi->pBuffPtr++; + hospi->XferCount--; + } while(hospi->XferCount > 0U); + + if (status == HAL_OK) + { + /* Wait till transfer complete flag is set to go back in idle state */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear transfer complete flag */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Send an amount of data in non-blocking mode with interrupt. + * @param hospi : OSPI handle + * @param pData : pointer to data buffer + * @note This function is used only in Indirect Write Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Transmit_IT(OSPI_HandleTypeDef *hospi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U; + hospi->XferSize = hospi->XferCount; + hospi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect write */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC); + + /* Update the state */ + hospi->State = HAL_OSPI_STATE_BUSY_TX; + + /* Enable the transfer complete, fifo threshold and transfer error interrupts */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE); + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Receive an amount of data in non-blocking mode with interrupt. + * @param hospi : OSPI handle + * @param pData : pointer to data buffer + * @note This function is used only in Indirect Read Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Receive_IT(OSPI_HandleTypeDef *hospi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t addr_reg = hospi->Instance->AR; + uint32_t ir_reg = hospi->Instance->IR; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + /* Configure counters and size */ + hospi->XferCount = READ_REG(hospi->Instance->DLR) + 1U; + hospi->XferSize = hospi->XferCount; + hospi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect read */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC); + + /* Update the state */ + hospi->State = HAL_OSPI_STATE_BUSY_RX; + + /* Enable the transfer complete, fifo threshold and transfer error interrupts */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE); + + /* Trig the transfer by re-writing address or instruction register */ + if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hospi->Instance->IR, ir_reg); + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Send an amount of data in non-blocking mode with DMA. + * @param hospi : OSPI handle + * @param pData : pointer to data buffer + * @note This function is used only in Indirect Write Mode + * @note If DMA peripheral access is configured as halfword, the number + * of data and the fifo threshold should be aligned on halfword + * @note If DMA peripheral access is configured as word, the number + * of data and the fifo threshold should be aligned on word + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Transmit_DMA(OSPI_HandleTypeDef *hospi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t data_size = hospi->Instance->DLR + 1U; + + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + hospi->XferCount = data_size; + + { + hospi->XferSize = hospi->XferCount; + hospi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect write */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_WRITE); + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC); + + /* Update the state */ + hospi->State = HAL_OSPI_STATE_BUSY_TX; + + /* Set the MDMA transfer complete callback */ + hospi->hmdma->XferCpltCallback = OSPI_DMACplt; + + /* Set the MDMA error callback */ + hospi->hmdma->XferErrorCallback = OSPI_DMAError; + + /* Clear the MDMA abort callback */ + hospi->hmdma->XferAbortCallback = NULL; + + /* In Transmit mode , the MDMA destination is the OSPI DR register : Force the MDMA Destination Increment to disable */ + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) ,MDMA_DEST_INC_DISABLE); + + /* Update MDMA configuration with the correct SourceInc field for Write operation */ + if (hospi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_BYTE) + { + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_BYTE); + } + else if (hospi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_HALFWORD) + { + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_HALFWORD); + } + else if (hospi->hmdma->Init.SourceDataSize == MDMA_SRC_DATASIZE_WORD) + { + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_WORD); + } + else + { + /* in case of incorrect source data size */ + hospi->ErrorCode |= HAL_OSPI_ERROR_DMA; + status = HAL_ERROR; + } + + /* Enable the transmit MDMA Channel */ + if (HAL_MDMA_Start_IT(hospi->hmdma, (uint32_t)pData, (uint32_t)&hospi->Instance->DR, hospi->XferSize,1) == HAL_OK) + { + /* Enable the transfer error interrupt */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE); + + /* Enable the MDMA transfer by setting the DMAEN bit not needed for MDMA*/ + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_DMA; + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @param hospi : OSPI handle + * @param pData : pointer to data buffer. + * @note This function is used only in Indirect Read Mode + * @note If DMA peripheral access is configured as halfword, the number + * of data and the fifo threshold should be aligned on halfword + * @note If DMA peripheral access is configured as word, the number + * of data and the fifo threshold should be aligned on word + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_Receive_DMA(OSPI_HandleTypeDef *hospi, uint8_t *pData) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t data_size = hospi->Instance->DLR + 1U; + uint32_t addr_reg = hospi->Instance->AR; + uint32_t ir_reg = hospi->Instance->IR; + /* Check the data pointer allocation */ + if (pData == NULL) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + else + { + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + hospi->XferCount = data_size; + + { + hospi->XferSize = hospi->XferCount; + hospi->pBuffPtr = pData; + + /* Configure CR register with functional mode as indirect read */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, OSPI_FUNCTIONAL_MODE_INDIRECT_READ); + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_TC); + + /* Update the state */ + hospi->State = HAL_OSPI_STATE_BUSY_RX; + + /* Set the DMA transfer complete callback */ + hospi->hmdma->XferCpltCallback = OSPI_DMACplt; + + /* Set the DMA error callback */ + hospi->hmdma->XferErrorCallback = OSPI_DMAError; + + /* Clear the DMA abort callback */ + hospi->hmdma->XferAbortCallback = NULL; + + /* In Receive mode , the MDMA source is the OSPI DR register : Force the MDMA Source Increment to disable */ + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_SINC | MDMA_CTCR_SINCOS) , MDMA_SRC_INC_DISABLE); + + /* Update MDMA configuration with the correct DestinationInc field for read operation */ + if (hospi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_BYTE) + { + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_BYTE); + } + else if (hospi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_HALFWORD) + { + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_HALFWORD); + } + else if (hospi->hmdma->Init.DestDataSize == MDMA_DEST_DATASIZE_WORD) + { + MODIFY_REG(hospi->hmdma->Instance->CTCR, (MDMA_CTCR_DINC | MDMA_CTCR_DINCOS) , MDMA_DEST_INC_WORD); + } + else + { + /* in case of incorrect destination data size */ + hospi->ErrorCode |= HAL_OSPI_ERROR_DMA; + status = HAL_ERROR; + } + + /* Enable the transmit MDMA Channel */ + if (HAL_MDMA_Start_IT(hospi->hmdma, (uint32_t)&hospi->Instance->DR, (uint32_t)pData, hospi->XferSize, 1) == HAL_OK) + { + /* Enable the transfer error interrupt */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TE); + + /* Trig the transfer by re-writing address or instruction register */ + if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hospi->Instance->IR, ir_reg); + } + } + + /* Enable the MDMA transfer by setting the DMAEN bit not needed for MDMA*/ + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_DMA; + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the OSPI Automatic Polling Mode in blocking mode. + * @param hospi : OSPI handle + * @param cfg : structure that contains the polling configuration information. + * @param Timeout : Timeout duration + * @note This function is used only in Automatic Polling Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_AutoPolling(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg, uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + uint32_t addr_reg = hospi->Instance->AR; + uint32_t ir_reg = hospi->Instance->IR; +#ifdef USE_FULL_ASSERT + uint32_t dlr_reg = hospi->Instance->DLR; +#endif /* USE_FULL_ASSERT */ + + /* Check the parameters of the autopolling configuration structure */ + assert_param(IS_OSPI_MATCH_MODE (cfg->MatchMode)); + assert_param(IS_OSPI_AUTOMATIC_STOP (cfg->AutomaticStop)); + assert_param(IS_OSPI_INTERVAL (cfg->Interval)); + assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg+1U)); + + /* Check the state */ + if ((hospi->State == HAL_OSPI_STATE_CMD_CFG) && (cfg->AutomaticStop == HAL_OSPI_AUTOMATIC_STOP_ENABLE)) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Configure registers */ + WRITE_REG (hospi->Instance->PSMAR, cfg->Match); + WRITE_REG (hospi->Instance->PSMKR, cfg->Mask); + WRITE_REG (hospi->Instance->PIR, cfg->Interval); + MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE), + (cfg->MatchMode | cfg->AutomaticStop | OSPI_FUNCTIONAL_MODE_AUTO_POLLING)); + + /* Trig the transfer by re-writing address or instruction register */ + if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hospi->Instance->IR, ir_reg); + } + } + + /* Wait till status match flag is set to go back in idle state */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_SM, SET, tickstart, Timeout); + + if (status == HAL_OK) + { + /* Clear status match flag */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_SM); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the OSPI Automatic Polling Mode in non-blocking mode. + * @param hospi : OSPI handle + * @param cfg : structure that contains the polling configuration information. + * @note This function is used only in Automatic Polling Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_AutoPolling_IT(OSPI_HandleTypeDef *hospi, OSPI_AutoPollingTypeDef *cfg) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + uint32_t addr_reg = hospi->Instance->AR; + uint32_t ir_reg = hospi->Instance->IR; +#ifdef USE_FULL_ASSERT + uint32_t dlr_reg = hospi->Instance->DLR; +#endif /* USE_FULL_ASSERT */ + + /* Check the parameters of the autopolling configuration structure */ + assert_param(IS_OSPI_MATCH_MODE (cfg->MatchMode)); + assert_param(IS_OSPI_AUTOMATIC_STOP (cfg->AutomaticStop)); + assert_param(IS_OSPI_INTERVAL (cfg->Interval)); + assert_param(IS_OSPI_STATUS_BYTES_SIZE(dlr_reg+1U)); + + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout); + + if (status == HAL_OK) + { + /* Configure registers */ + WRITE_REG (hospi->Instance->PSMAR, cfg->Match); + WRITE_REG (hospi->Instance->PSMKR, cfg->Mask); + WRITE_REG (hospi->Instance->PIR, cfg->Interval); + MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_PMM | OCTOSPI_CR_APMS | OCTOSPI_CR_FMODE), + (cfg->MatchMode | cfg->AutomaticStop | OSPI_FUNCTIONAL_MODE_AUTO_POLLING)); + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TE | HAL_OSPI_FLAG_SM); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_BUSY_AUTO_POLLING; + + /* Enable the status match and transfer error interrupts */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_SM | HAL_OSPI_IT_TE); + + /* Trig the transfer by re-writing address or instruction register */ + if (hospi->Init.MemoryType == HAL_OSPI_MEMTYPE_HYPERBUS) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + if (READ_BIT(hospi->Instance->CCR, OCTOSPI_CCR_ADMODE) != HAL_OSPI_ADDRESS_NONE) + { + WRITE_REG(hospi->Instance->AR, addr_reg); + } + else + { + WRITE_REG(hospi->Instance->IR, ir_reg); + } + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the Memory Mapped mode. + * @param hospi : OSPI handle + * @param cfg : structure that contains the memory mapped configuration information. + * @note This function is used only in Memory mapped Mode + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_MemoryMapped(OSPI_HandleTypeDef *hospi, OSPI_MemoryMappedTypeDef *cfg) +{ + HAL_StatusTypeDef status; + uint32_t tickstart = HAL_GetTick(); + + /* Check the parameters of the memory-mapped configuration structure */ + assert_param(IS_OSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation)); + + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_CMD_CFG) + { + /* Wait till busy flag is reset */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout); + + if (status == HAL_OK) + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_BUSY_MEM_MAPPED; + + if (cfg->TimeOutActivation == HAL_OSPI_TIMEOUT_COUNTER_ENABLE) + { + assert_param(IS_OSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod)); + + /* Configure register */ + WRITE_REG(hospi->Instance->LPTR, cfg->TimeOutPeriod); + + /* Clear flags related to interrupt */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TO); + + /* Enable the timeout interrupt */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TO); + } + + /* Configure CR register with functional mode as memory-mapped */ + MODIFY_REG(hospi->Instance->CR, (OCTOSPI_CR_TCEN | OCTOSPI_CR_FMODE), + (cfg->TimeOutActivation | OSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)); + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** + * @brief Transfer Error callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_ErrorCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_OSPI_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief Abort completed callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_AbortCpltCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_OSPI_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @brief FIFO Threshold callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_FifoThresholdCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_OSPI_FIFOThresholdCallback could be implemented in the user file + */ +} + +/** + * @brief Command completed callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_CmdCpltCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_OSPI_CmdCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_RxCpltCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_OSPI_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callback. + * @param hospi : OSPI handle + * @retval None + */ + __weak void HAL_OSPI_TxCpltCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_OSPI_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_RxHalfCpltCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_OSPI_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_TxHalfCpltCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_OSPI_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Status Match callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_StatusMatchCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_OSPI_StatusMatchCallback could be implemented in the user file + */ +} + +/** + * @brief Timeout callback. + * @param hospi : OSPI handle + * @retval None + */ +__weak void HAL_OSPI_TimeOutCallback(OSPI_HandleTypeDef *hospi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hospi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_OSPI_TimeOutCallback could be implemented in the user file + */ +} + +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User OSPI Callback + * To be used instead of the weak (surcharged) predefined callback + * @param hospi : OSPI handle + * @param CallbackID : ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_OSPI_ERROR_CB_ID OSPI Error Callback ID + * @arg @ref HAL_OSPI_ABORT_CB_ID OSPI Abort Callback ID + * @arg @ref HAL_OSPI_FIFO_THRESHOLD_CB_ID OSPI FIFO Threshold Callback ID + * @arg @ref HAL_OSPI_CMD_CPLT_CB_ID OSPI Command Complete Callback ID + * @arg @ref HAL_OSPI_RX_CPLT_CB_ID OSPI Rx Complete Callback ID + * @arg @ref HAL_OSPI_TX_CPLT_CB_ID OSPI Tx Complete Callback ID + * @arg @ref HAL_OSPI_RX_HALF_CPLT_CB_ID OSPI Rx Half Complete Callback ID + * @arg @ref HAL_OSPI_TX_HALF_CPLT_CB_ID OSPI Tx Half Complete Callback ID + * @arg @ref HAL_OSPI_STATUS_MATCH_CB_ID OSPI Status Match Callback ID + * @arg @ref HAL_OSPI_TIMEOUT_CB_ID OSPI Timeout Callback ID + * @arg @ref HAL_OSPI_MSP_INIT_CB_ID OSPI MspInit callback ID + * @arg @ref HAL_OSPI_MSP_DEINIT_CB_ID OSPI MspDeInit callback ID + * @param pCallback : pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_OSPI_RegisterCallback(OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID, + pOSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(pCallback == NULL) + { + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if(hospi->State == HAL_OSPI_STATE_READY) + { + switch (CallbackID) + { + case HAL_OSPI_ERROR_CB_ID : + hospi->ErrorCallback = pCallback; + break; + case HAL_OSPI_ABORT_CB_ID : + hospi->AbortCpltCallback = pCallback; + break; + case HAL_OSPI_FIFO_THRESHOLD_CB_ID : + hospi->FifoThresholdCallback = pCallback; + break; + case HAL_OSPI_CMD_CPLT_CB_ID : + hospi->CmdCpltCallback = pCallback; + break; + case HAL_OSPI_RX_CPLT_CB_ID : + hospi->RxCpltCallback = pCallback; + break; + case HAL_OSPI_TX_CPLT_CB_ID : + hospi->TxCpltCallback = pCallback; + break; + case HAL_OSPI_RX_HALF_CPLT_CB_ID : + hospi->RxHalfCpltCallback = pCallback; + break; + case HAL_OSPI_TX_HALF_CPLT_CB_ID : + hospi->TxHalfCpltCallback = pCallback; + break; + case HAL_OSPI_STATUS_MATCH_CB_ID : + hospi->StatusMatchCallback = pCallback; + break; + case HAL_OSPI_TIMEOUT_CB_ID : + hospi->TimeOutCallback = pCallback; + break; + case HAL_OSPI_MSP_INIT_CB_ID : + hospi->MspInitCallback = pCallback; + break; + case HAL_OSPI_MSP_DEINIT_CB_ID : + hospi->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hospi->State == HAL_OSPI_STATE_RESET) + { + switch (CallbackID) + { + case HAL_OSPI_MSP_INIT_CB_ID : + hospi->MspInitCallback = pCallback; + break; + case HAL_OSPI_MSP_DEINIT_CB_ID : + hospi->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User OSPI Callback + * OSPI Callback is redirected to the weak (surcharged) predefined callback + * @param hospi : OSPI handle + * @param CallbackID : ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_OSPI_ERROR_CB_ID OSPI Error Callback ID + * @arg @ref HAL_OSPI_ABORT_CB_ID OSPI Abort Callback ID + * @arg @ref HAL_OSPI_FIFO_THRESHOLD_CB_ID OSPI FIFO Threshold Callback ID + * @arg @ref HAL_OSPI_CMD_CPLT_CB_ID OSPI Command Complete Callback ID + * @arg @ref HAL_OSPI_RX_CPLT_CB_ID OSPI Rx Complete Callback ID + * @arg @ref HAL_OSPI_TX_CPLT_CB_ID OSPI Tx Complete Callback ID + * @arg @ref HAL_OSPI_RX_HALF_CPLT_CB_ID OSPI Rx Half Complete Callback ID + * @arg @ref HAL_OSPI_TX_HALF_CPLT_CB_ID OSPI Tx Half Complete Callback ID + * @arg @ref HAL_OSPI_STATUS_MATCH_CB_ID OSPI Status Match Callback ID + * @arg @ref HAL_OSPI_TIMEOUT_CB_ID OSPI Timeout Callback ID + * @arg @ref HAL_OSPI_MSP_INIT_CB_ID OSPI MspInit callback ID + * @arg @ref HAL_OSPI_MSP_DEINIT_CB_ID OSPI MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_OSPI_UnRegisterCallback (OSPI_HandleTypeDef *hospi, HAL_OSPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if(hospi->State == HAL_OSPI_STATE_READY) + { + switch (CallbackID) + { + case HAL_OSPI_ERROR_CB_ID : + hospi->ErrorCallback = HAL_OSPI_ErrorCallback; + break; + case HAL_OSPI_ABORT_CB_ID : + hospi->AbortCpltCallback = HAL_OSPI_AbortCpltCallback; + break; + case HAL_OSPI_FIFO_THRESHOLD_CB_ID : + hospi->FifoThresholdCallback = HAL_OSPI_FifoThresholdCallback; + break; + case HAL_OSPI_CMD_CPLT_CB_ID : + hospi->CmdCpltCallback = HAL_OSPI_CmdCpltCallback; + break; + case HAL_OSPI_RX_CPLT_CB_ID : + hospi->RxCpltCallback = HAL_OSPI_RxCpltCallback; + break; + case HAL_OSPI_TX_CPLT_CB_ID : + hospi->TxCpltCallback = HAL_OSPI_TxCpltCallback; + break; + case HAL_OSPI_RX_HALF_CPLT_CB_ID : + hospi->RxHalfCpltCallback = HAL_OSPI_RxHalfCpltCallback; + break; + case HAL_OSPI_TX_HALF_CPLT_CB_ID : + hospi->TxHalfCpltCallback = HAL_OSPI_TxHalfCpltCallback; + break; + case HAL_OSPI_STATUS_MATCH_CB_ID : + hospi->StatusMatchCallback = HAL_OSPI_StatusMatchCallback; + break; + case HAL_OSPI_TIMEOUT_CB_ID : + hospi->TimeOutCallback = HAL_OSPI_TimeOutCallback; + break; + case HAL_OSPI_MSP_INIT_CB_ID : + hospi->MspInitCallback = HAL_OSPI_MspInit; + break; + case HAL_OSPI_MSP_DEINIT_CB_ID : + hospi->MspDeInitCallback = HAL_OSPI_MspDeInit; + break; + default : + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hospi->State == HAL_OSPI_STATE_RESET) + { + switch (CallbackID) + { + case HAL_OSPI_MSP_INIT_CB_ID : + hospi->MspInitCallback = HAL_OSPI_MspInit; + break; + case HAL_OSPI_MSP_DEINIT_CB_ID : + hospi->MspDeInitCallback = HAL_OSPI_MspDeInit; + break; + default : + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hospi->ErrorCode |= HAL_OSPI_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + +/** + * @} + */ + +/** @defgroup OSPI_Exported_Functions_Group3 Peripheral Control and State functions + * @brief OSPI control and State functions + * +@verbatim + =============================================================================== + ##### Peripheral Control and State functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Check in run-time the state of the driver. + (+) Check the error code set during last operation. + (+) Abort any operation. + (+) Manage the Fifo threshold. + (+) Configure the timeout duration used in the driver. + +@endverbatim + * @{ + */ + +/** +* @brief Abort the current transmission. +* @param hospi : OSPI handle +* @retval HAL status +*/ +HAL_StatusTypeDef HAL_OSPI_Abort(OSPI_HandleTypeDef *hospi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t state; + uint32_t tickstart = HAL_GetTick(); + + /* Check if the state is in one of the busy or configured states */ + state = hospi->State; + if (((state & OSPI_BUSY_STATE_MASK) != 0U) || ((state & OSPI_CFG_STATE_MASK) != 0U)) + { + /* Check if the DMA is enabled */ + if ((hospi->Instance->CR & OCTOSPI_CR_DMAEN) != 0U) + { + /* Disable the DMA transfer on the OctoSPI side */ + CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN); + + /* Disable the DMA transfer on the DMA side */ + status = HAL_MDMA_Abort(hospi->hmdma); + if (status != HAL_OK) + { + hospi->ErrorCode = HAL_OSPI_ERROR_DMA; + } + } + + if (__HAL_OSPI_GET_FLAG(hospi, HAL_OSPI_FLAG_BUSY) != RESET) + { + /* Perform an abort of the OctoSPI */ + SET_BIT(hospi->Instance->CR, OCTOSPI_CR_ABORT); + + /* Wait until the transfer complete flag is set to go back in idle state */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_TC, SET, tickstart, hospi->Timeout); + + if (status == HAL_OK) + { + /* Clear transfer complete flag */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC); + + /* Wait until the busy flag is reset to go back in idle state */ + status = OSPI_WaitFlagStateUntilTimeout(hospi, HAL_OSPI_FLAG_BUSY, RESET, tickstart, hospi->Timeout); + + if (status == HAL_OK) + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + } + } + } + else + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** +* @brief Abort the current transmission (non-blocking function) +* @param hospi : OSPI handle +* @retval HAL status +*/ +HAL_StatusTypeDef HAL_OSPI_Abort_IT(OSPI_HandleTypeDef *hospi) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t state; + + /* Check if the state is in one of the busy or configured states */ + state = hospi->State; + if (((state & OSPI_BUSY_STATE_MASK) != 0U) || ((state & OSPI_CFG_STATE_MASK) != 0U)) + { + /* Disable all interrupts */ + __HAL_OSPI_DISABLE_IT(hospi, (HAL_OSPI_IT_TO | HAL_OSPI_IT_SM | HAL_OSPI_IT_FT | HAL_OSPI_IT_TC | HAL_OSPI_IT_TE)); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_ABORT; + + /* Check if the DMA is enabled */ + if ((hospi->Instance->CR & OCTOSPI_CR_DMAEN) != 0U) + { + /* Disable the DMA transfer on the OctoSPI side */ + CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN); + + /* Disable the DMA transfer on the DMA side */ + hospi->hmdma->XferAbortCallback = OSPI_DMAAbortCplt; + if (HAL_MDMA_Abort_IT(hospi->hmdma) != HAL_OK) + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->AbortCpltCallback(hospi); +#else + HAL_OSPI_AbortCpltCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/ + } + } + else + { + if (__HAL_OSPI_GET_FLAG(hospi, HAL_OSPI_FLAG_BUSY) != RESET) + { + /* Clear transfer complete flag */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC); + + /* Enable the transfer complete interrupts */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC); + + /* Perform an abort of the OctoSPI */ + SET_BIT(hospi->Instance->CR, OCTOSPI_CR_ABORT); + } + else + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->AbortCpltCallback(hospi); +#else + HAL_OSPI_AbortCpltCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + } + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** @brief Set OSPI Fifo threshold. + * @param hospi : OSPI handle. + * @param Threshold : Threshold of the Fifo. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPI_SetFifoThreshold(OSPI_HandleTypeDef *hospi, uint32_t Threshold) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the state */ + if ((hospi->State & OSPI_BUSY_STATE_MASK) == 0U) + { + /* Synchronize initialization structure with the new fifo threshold value */ + hospi->Init.FifoThreshold = Threshold; + + /* Configure new fifo threshold */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FTHRES, ((hospi->Init.FifoThreshold-1U) << OCTOSPI_CR_FTHRES_Pos)); + + } + else + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_SEQUENCE; + } + + /* Return function status */ + return status; +} + +/** @brief Get OSPI Fifo threshold. + * @param hospi : OSPI handle. + * @retval Fifo threshold + */ +uint32_t HAL_OSPI_GetFifoThreshold(OSPI_HandleTypeDef *hospi) +{ + return ((READ_BIT(hospi->Instance->CR, OCTOSPI_CR_FTHRES) >> OCTOSPI_CR_FTHRES_Pos) + 1U); +} + +/** @brief Set OSPI timeout. + * @param hospi : OSPI handle. + * @param Timeout : Timeout for the memory access. + * @retval None + */ +HAL_StatusTypeDef HAL_OSPI_SetTimeout(OSPI_HandleTypeDef *hospi, uint32_t Timeout) +{ + hospi->Timeout = Timeout; + return HAL_OK; +} + +/** +* @brief Return the OSPI error code. +* @param hospi : OSPI handle +* @retval OSPI Error Code +*/ +uint32_t HAL_OSPI_GetError(OSPI_HandleTypeDef *hospi) +{ + return hospi->ErrorCode; +} + +/** + * @brief Return the OSPI handle state. + * @param hospi : OSPI handle + * @retval HAL state + */ +uint32_t HAL_OSPI_GetState(OSPI_HandleTypeDef *hospi) +{ + /* Return OSPI handle state */ + return hospi->State; +} + +/** + * @} + */ + +/** @defgroup OSPI_Exported_Functions_Group4 IO Manager configuration function + * @brief OSPI IO Manager configuration function + * +@verbatim + =============================================================================== + ##### IO Manager configuration function ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to : + (+) Configure the IO manager. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the OctoSPI IO manager. + * @param hospi : OSPI handle + * @param cfg : Configuration of the IO Manager for the instance + * @param Timeout : Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_OSPIM_Config(OSPI_HandleTypeDef *hospi, OSPIM_CfgTypeDef *cfg, uint32_t Timeout) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t instance; + uint8_t index; + uint8_t ospi_enabled = 0U; + uint8_t other_instance; + OSPIM_CfgTypeDef IOM_cfg[OSPI_NB_INSTANCE]; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(Timeout); + + /* Check the parameters of the OctoSPI IO Manager configuration structure */ + assert_param(IS_OSPIM_PORT(cfg->ClkPort)); + assert_param(IS_OSPIM_DQS_PORT(cfg->DQSPort)); + assert_param(IS_OSPIM_PORT(cfg->NCSPort)); + assert_param(IS_OSPIM_IO_PORT(cfg->IOLowPort)); + assert_param(IS_OSPIM_IO_PORT(cfg->IOHighPort)); + assert_param(IS_OSPIM_REQ2ACKTIME(cfg->Req2AckTime)); + + if (hospi->Instance == OCTOSPI1) + { + instance = 0U; + other_instance = 1U; + } + else + { + instance = 1U; + other_instance = 0U; + } + + /**************** Get current configuration of the instances ****************/ + for (index = 0U; index < OSPI_NB_INSTANCE; index++) + { + if (OSPIM_GetConfig(index+1U, &(IOM_cfg[index])) != HAL_OK) + { + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + } + + if (status == HAL_OK) + { + /********** Disable both OctoSPI to configure OctoSPI IO Manager **********/ + if ((OCTOSPI1->CR & OCTOSPI_CR_EN) != 0U) + { + CLEAR_BIT(OCTOSPI1->CR, OCTOSPI_CR_EN); + ospi_enabled |= 0x1U; + } + if ((OCTOSPI2->CR & OCTOSPI_CR_EN) != 0U) + { + CLEAR_BIT(OCTOSPI2->CR, OCTOSPI_CR_EN); + ospi_enabled |= 0x2U; + } + + /***************** Deactivation of previous configuration *****************/ + CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].NCSPort-1U)], OCTOSPIM_PCR_NCSEN); + if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) != 0U) + { + /* De-multiplexing should be performed */ + CLEAR_BIT(OCTOSPIM->CR, OCTOSPIM_CR_MUXEN); + + if (other_instance == 1U) + { + SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort-1U)], OCTOSPIM_PCR_CLKSRC); + if (IOM_cfg[other_instance].DQSPort != 0U) + { + SET_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort-1U)], OCTOSPIM_PCR_DQSSRC); + } + if (IOM_cfg[other_instance].IOLowPort != HAL_OSPIM_IOPORT_NONE) + { + SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLSRC_1); + } + if (IOM_cfg[other_instance].IOHighPort != HAL_OSPIM_IOPORT_NONE) + { + SET_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHSRC_1); + } + } + } + else + { + if (IOM_cfg[instance].ClkPort != 0U) + { + CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].ClkPort-1U)], OCTOSPIM_PCR_CLKEN); + if (IOM_cfg[instance].DQSPort != 0U) + { + CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[instance].DQSPort-1U)], OCTOSPIM_PCR_DQSEN); + } + if (IOM_cfg[instance].IOLowPort != HAL_OSPIM_IOPORT_NONE) + { + CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOLEN); + } + if (IOM_cfg[instance].IOHighPort != HAL_OSPIM_IOPORT_NONE) + { + CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], OCTOSPIM_PCR_IOHEN); + } + } + } + + /********************* Deactivation of other instance *********************/ + if ((cfg->ClkPort == IOM_cfg[other_instance].ClkPort) || (cfg->DQSPort == IOM_cfg[other_instance].DQSPort) || + (cfg->NCSPort == IOM_cfg[other_instance].NCSPort) || (cfg->IOLowPort == IOM_cfg[other_instance].IOLowPort) || + (cfg->IOHighPort == IOM_cfg[other_instance].IOHighPort)) + { + if ((cfg->ClkPort == IOM_cfg[other_instance].ClkPort) && + (cfg->DQSPort == IOM_cfg[other_instance].DQSPort) && + (cfg->IOLowPort == IOM_cfg[other_instance].IOLowPort) && + (cfg->IOHighPort == IOM_cfg[other_instance].IOHighPort)) + { + /* Multiplexing should be performed */ + SET_BIT(OCTOSPIM->CR, OCTOSPIM_CR_MUXEN); + } + else + { + CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].ClkPort-1U)], OCTOSPIM_PCR_CLKEN); + if (IOM_cfg[other_instance].DQSPort != 0U) + { + CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].DQSPort-1U)], OCTOSPIM_PCR_DQSEN); + } + CLEAR_BIT(OCTOSPIM->PCR[(IOM_cfg[other_instance].NCSPort-1U)], OCTOSPIM_PCR_NCSEN); + if (IOM_cfg[other_instance].IOLowPort != HAL_OSPIM_IOPORT_NONE) + { + CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOLowPort-1U)& OSPI_IOM_PORT_MASK)], + OCTOSPIM_PCR_IOLEN); + } + if (IOM_cfg[other_instance].IOHighPort != HAL_OSPIM_IOPORT_NONE) + { + CLEAR_BIT(OCTOSPIM->PCR[((IOM_cfg[other_instance].IOHighPort-1U)& OSPI_IOM_PORT_MASK)], + OCTOSPIM_PCR_IOHEN); + } + } + } + + /******************** Activation of new configuration *********************/ + MODIFY_REG(OCTOSPIM->PCR[(cfg->NCSPort - 1U)], (OCTOSPIM_PCR_NCSEN | OCTOSPIM_PCR_NCSSRC), + (OCTOSPIM_PCR_NCSEN | (instance << OCTOSPIM_PCR_NCSSRC_Pos))); + + if ((cfg->Req2AckTime - 1U) > ((OCTOSPIM->CR & OCTOSPIM_CR_REQ2ACK_TIME) >> OCTOSPIM_CR_REQ2ACK_TIME_Pos)) + { + MODIFY_REG(OCTOSPIM->CR, OCTOSPIM_CR_REQ2ACK_TIME, ((cfg->Req2AckTime - 1U) << OCTOSPIM_CR_REQ2ACK_TIME_Pos)); + } + + if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort-1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC), OCTOSPIM_PCR_CLKEN); + if (cfg->DQSPort != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort-1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC), OCTOSPIM_PCR_DQSEN); + } + + if ((cfg->IOLowPort & OCTOSPIM_PCR_IOLEN) != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), OCTOSPIM_PCR_IOLEN); + } + else if (cfg->IOLowPort != HAL_OSPIM_IOPORT_NONE) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), OCTOSPIM_PCR_IOHEN); + } + else + { + /* Nothing to do */ + } + + if ((cfg->IOHighPort & OCTOSPIM_PCR_IOLEN) != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0)); + } + else if (cfg->IOHighPort != HAL_OSPIM_IOPORT_NONE) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0)); + } + else + { + /* Nothing to do */ + } + } + else + { + MODIFY_REG(OCTOSPIM->PCR[(cfg->ClkPort-1U)], (OCTOSPIM_PCR_CLKEN | OCTOSPIM_PCR_CLKSRC), + (OCTOSPIM_PCR_CLKEN | (instance << OCTOSPIM_PCR_CLKSRC_Pos))); + if (cfg->DQSPort != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[(cfg->DQSPort-1U)], (OCTOSPIM_PCR_DQSEN | OCTOSPIM_PCR_DQSSRC), + (OCTOSPIM_PCR_DQSEN | (instance << OCTOSPIM_PCR_DQSSRC_Pos))); + } + + if ((cfg->IOLowPort & OCTOSPIM_PCR_IOLEN) != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), + (OCTOSPIM_PCR_IOLEN | (instance << (OCTOSPIM_PCR_IOLSRC_Pos+1U)))); + } + else if (cfg->IOLowPort != HAL_OSPIM_IOPORT_NONE) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOLowPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), + (OCTOSPIM_PCR_IOHEN | (instance << (OCTOSPIM_PCR_IOHSRC_Pos+1U)))); + } + else + { + /* Nothing to do */ + } + + if ((cfg->IOHighPort & OCTOSPIM_PCR_IOLEN) != 0U) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC), + (OCTOSPIM_PCR_IOLEN | OCTOSPIM_PCR_IOLSRC_0 | (instance << (OCTOSPIM_PCR_IOLSRC_Pos+1U)))); + } + else if (cfg->IOHighPort != HAL_OSPIM_IOPORT_NONE) + { + MODIFY_REG(OCTOSPIM->PCR[((cfg->IOHighPort-1U)& OSPI_IOM_PORT_MASK)], + (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC), + (OCTOSPIM_PCR_IOHEN | OCTOSPIM_PCR_IOHSRC_0 | (instance << (OCTOSPIM_PCR_IOHSRC_Pos+1U)))); + } + else + { + /* Nothing to do */ + } + } + + /******* Re-enable both OctoSPI after configure OctoSPI IO Manager ********/ + if ((ospi_enabled & 0x1U) != 0U) + { + SET_BIT(OCTOSPI1->CR, OCTOSPI_CR_EN); + } + if ((ospi_enabled & 0x2U) != 0U) + { + SET_BIT(OCTOSPI2->CR, OCTOSPI_CR_EN); + } + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** + @cond 0 + */ +/** + * @brief DMA OSPI process complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void OSPI_DMACplt(MDMA_HandleTypeDef *hmdma) +{ + OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hmdma->Parent); + hospi->XferCount = 0; + + /* Disable the DMA transfer on the OctoSPI side */ + CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN); + + /* Disable the DMA channel */ + __HAL_MDMA_DISABLE(hmdma); + + /* Enable the OSPI transfer complete Interrupt */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC); +} + +/** + * @brief DMA OSPI communication error callback. + * @param hdma : DMA handle + * @retval None + */ +static void OSPI_DMAError(MDMA_HandleTypeDef *hmdma) +{ + OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hmdma->Parent); + hospi->XferCount = 0; + hospi->ErrorCode = HAL_OSPI_ERROR_DMA; + + /* Disable the DMA transfer on the OctoSPI side */ + CLEAR_BIT(hospi->Instance->CR, OCTOSPI_CR_DMAEN); + + /* Abort the OctoSPI */ + if (HAL_OSPI_Abort_IT(hospi) != HAL_OK) + { + /* Disable the interrupts */ + __HAL_OSPI_DISABLE_IT(hospi, HAL_OSPI_IT_TC | HAL_OSPI_IT_FT | HAL_OSPI_IT_TE); + + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->ErrorCallback(hospi); +#else + HAL_OSPI_ErrorCallback(hospi); +#endif /*(USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } +} + +/** + * @brief DMA OSPI abort complete callback. + * @param hdma : DMA handle + * @retval None + */ +static void OSPI_DMAAbortCplt(MDMA_HandleTypeDef *hmdma) +{ + OSPI_HandleTypeDef* hospi = ( OSPI_HandleTypeDef* )(hmdma->Parent); + hospi->XferCount = 0; + + /* Check the state */ + if (hospi->State == HAL_OSPI_STATE_ABORT) + { + /* DMA abort called by OctoSPI abort */ + if (__HAL_OSPI_GET_FLAG(hospi, HAL_OSPI_FLAG_BUSY) != RESET) + { + /* Clear transfer complete flag */ + __HAL_OSPI_CLEAR_FLAG(hospi, HAL_OSPI_FLAG_TC); + + /* Enable the transfer complete interrupts */ + __HAL_OSPI_ENABLE_IT(hospi, HAL_OSPI_IT_TC); + + /* Perform an abort of the OctoSPI */ + SET_BIT(hospi->Instance->CR, OCTOSPI_CR_ABORT); + } + else + { + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Abort callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->AbortCpltCallback(hospi); +#else + HAL_OSPI_AbortCpltCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) */ + } + } + else + { + /* DMA abort called due to a transfer error interrupt */ + /* Update state */ + hospi->State = HAL_OSPI_STATE_READY; + + /* Error callback */ +#if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + hospi->ErrorCallback(hospi); +#else + HAL_OSPI_ErrorCallback(hospi); +#endif /* (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U)*/ + } +} + +/** + * @brief Wait for a flag state until timeout. + * @param hospi : OSPI handle + * @param Flag : Flag checked + * @param State : Value of the flag expected + * @param Timeout : Duration of the timeout + * @param Tickstart : Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef OSPI_WaitFlagStateUntilTimeout(OSPI_HandleTypeDef *hospi, uint32_t Flag, + FlagStatus State, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is in expected state */ + while((__HAL_OSPI_GET_FLAG(hospi, Flag)) != State) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if(((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + hospi->State = HAL_OSPI_STATE_ERROR; + hospi->ErrorCode |= HAL_OSPI_ERROR_TIMEOUT; + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the registers for the regular command mode. + * @param hospi : OSPI handle + * @param cmd : structure that contains the command configuration information + * @retval HAL status + */ +static HAL_StatusTypeDef OSPI_ConfigCmd(OSPI_HandleTypeDef *hospi, OSPI_RegularCmdTypeDef *cmd) +{ + HAL_StatusTypeDef status = HAL_OK; + __IO uint32_t *ccr_reg; + __IO uint32_t *tcr_reg; + __IO uint32_t *ir_reg; + __IO uint32_t *abr_reg; + + /* Re-initialize the value of the functional mode */ + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FMODE, 0U); + + /* Configure the flash ID */ + if (hospi->Init.DualQuad == HAL_OSPI_DUALQUAD_DISABLE) + { + MODIFY_REG(hospi->Instance->CR, OCTOSPI_CR_FSEL, cmd->FlashId); + } + + if (cmd->OperationType == HAL_OSPI_OPTYPE_WRITE_CFG) + { + ccr_reg = &(hospi->Instance->WCCR); + tcr_reg = &(hospi->Instance->WTCR); + ir_reg = &(hospi->Instance->WIR); + abr_reg = &(hospi->Instance->WABR); + } + else if (cmd->OperationType == HAL_OSPI_OPTYPE_WRAP_CFG) + { + ccr_reg = &(hospi->Instance->WPCCR); + tcr_reg = &(hospi->Instance->WPTCR); + ir_reg = &(hospi->Instance->WPIR); + abr_reg = &(hospi->Instance->WPABR); + } + else + { + ccr_reg = &(hospi->Instance->CCR); + tcr_reg = &(hospi->Instance->TCR); + ir_reg = &(hospi->Instance->IR); + abr_reg = &(hospi->Instance->ABR); + } + + /* Configure the CCR register with DQS and SIOO modes */ + *ccr_reg = (cmd->DQSMode | cmd->SIOOMode); + + if (cmd->AlternateBytesMode != HAL_OSPI_ALTERNATE_BYTES_NONE) + { + /* Configure the ABR register with alternate bytes value */ + *abr_reg = cmd->AlternateBytes; + + /* Configure the CCR register with alternate bytes communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ABMODE | OCTOSPI_CCR_ABDTR | OCTOSPI_CCR_ABSIZE), + (cmd->AlternateBytesMode | cmd->AlternateBytesDtrMode | cmd->AlternateBytesSize)); + } + + /* Configure the TCR register with the number of dummy cycles */ + MODIFY_REG((*tcr_reg), OCTOSPI_TCR_DCYC, cmd->DummyCycles); + + if (cmd->DataMode != HAL_OSPI_DATA_NONE) + { + if (cmd->OperationType == HAL_OSPI_OPTYPE_COMMON_CFG) + { + /* Configure the DLR register with the number of data */ + hospi->Instance->DLR = (cmd->NbData - 1U); + } + } + + if (cmd->InstructionMode != HAL_OSPI_INSTRUCTION_NONE) + { + if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE) + { + if (cmd->DataMode != HAL_OSPI_DATA_NONE) + { + /* ---- Command with instruction, address and data ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE | + OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE | + OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR), + (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize | + cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize | + cmd->DataMode | cmd->DataDtrMode)); + } + else + { + /* ---- Command with instruction and address ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE | + OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE), + (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize | + cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize)); + + /* The DHQC bit is linked with DDTR bit which should be activated */ + if ((hospi->Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) && + (cmd->InstructionDtrMode == HAL_OSPI_INSTRUCTION_DTR_ENABLE)) + { + MODIFY_REG((*ccr_reg), OCTOSPI_CCR_DDTR, HAL_OSPI_DATA_DTR_ENABLE); + } + } + + /* Configure the IR register with the instruction value */ + *ir_reg = cmd->Instruction; + + /* Configure the AR register with the address value */ + hospi->Instance->AR = cmd->Address; + } + else + { + if (cmd->DataMode != HAL_OSPI_DATA_NONE) + { + /* ---- Command with instruction and data ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE | + OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR), + (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize | + cmd->DataMode | cmd->DataDtrMode)); + } + else + { + /* ---- Command with only instruction ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_IMODE | OCTOSPI_CCR_IDTR | OCTOSPI_CCR_ISIZE), + (cmd->InstructionMode | cmd->InstructionDtrMode | cmd->InstructionSize)); + + /* The DHQC bit is linked with DDTR bit which should be activated */ + if ((hospi->Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) && + (cmd->InstructionDtrMode == HAL_OSPI_INSTRUCTION_DTR_ENABLE)) + { + MODIFY_REG((*ccr_reg), OCTOSPI_CCR_DDTR, HAL_OSPI_DATA_DTR_ENABLE); + } + } + + /* Configure the IR register with the instruction value */ + *ir_reg = cmd->Instruction; + + } + } + else + { + if (cmd->AddressMode != HAL_OSPI_ADDRESS_NONE) + { + if (cmd->DataMode != HAL_OSPI_DATA_NONE) + { + /* ---- Command with address and data ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE | + OCTOSPI_CCR_DMODE | OCTOSPI_CCR_DDTR), + (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize | + cmd->DataMode | cmd->DataDtrMode)); + } + else + { + /* ---- Command with only address ---- */ + + /* Configure the CCR register with all communication parameters */ + MODIFY_REG((*ccr_reg), (OCTOSPI_CCR_ADMODE | OCTOSPI_CCR_ADDTR | OCTOSPI_CCR_ADSIZE), + (cmd->AddressMode | cmd->AddressDtrMode | cmd->AddressSize)); + } + + /* Configure the AR register with the instruction value */ + hospi->Instance->AR = cmd->Address; + } + else + { + /* ---- Invalid command configuration (no instruction, no address) ---- */ + status = HAL_ERROR; + hospi->ErrorCode = HAL_OSPI_ERROR_INVALID_PARAM; + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Get the current IOM configuration for an OctoSPI instance. + * @param instance_nb : number of the instance + * @param cfg : configuration of the IO Manager for the instance + * @retval HAL status + */ +static HAL_StatusTypeDef OSPIM_GetConfig(uint8_t instance_nb, OSPIM_CfgTypeDef *cfg) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t reg; + uint32_t value = 0U; + uint32_t index; + + if ((instance_nb == 0U) || (instance_nb > OSPI_NB_INSTANCE) || (cfg == NULL)) + { + /* Invalid parameter -> error returned */ + status = HAL_ERROR; + } + else + { + /* Initialize the structure */ + cfg->ClkPort = 0U; + cfg->DQSPort = 0U; + cfg->NCSPort = 0U; + cfg->IOLowPort = 0U; + cfg->IOHighPort = 0U; + + if (instance_nb == 2U) + { + if ((OCTOSPIM->CR & OCTOSPIM_CR_MUXEN) == 0U) + { + value = (OCTOSPIM_PCR_CLKSRC | OCTOSPIM_PCR_DQSSRC | OCTOSPIM_PCR_NCSSRC + | OCTOSPIM_PCR_IOLSRC_1 | OCTOSPIM_PCR_IOHSRC_1); + } + else + { + value = OCTOSPIM_PCR_NCSSRC; + } + } + + /* Get the information about the instance */ + for (index = 0U; index < OSPI_IOM_NB_PORTS; index ++) + { + reg = OCTOSPIM->PCR[index]; + + if ((reg & OCTOSPIM_PCR_CLKEN) != 0U) + { + /* The clock is enabled on this port */ + if ((reg & OCTOSPIM_PCR_CLKSRC) == (value & OCTOSPIM_PCR_CLKSRC)) + { + /* The clock correspond to the instance passed as parameter */ + cfg->ClkPort = index+1U; + } + } + + if ((reg & OCTOSPIM_PCR_DQSEN) != 0U) + { + /* The DQS is enabled on this port */ + if ((reg & OCTOSPIM_PCR_DQSSRC) == (value & OCTOSPIM_PCR_DQSSRC)) + { + /* The DQS correspond to the instance passed as parameter */ + cfg->DQSPort = index+1U; + } + } + + if ((reg & OCTOSPIM_PCR_NCSEN) != 0U) + { + /* The nCS is enabled on this port */ + if ((reg & OCTOSPIM_PCR_NCSSRC) == (value & OCTOSPIM_PCR_NCSSRC)) + { + /* The nCS correspond to the instance passed as parameter */ + cfg->NCSPort = index+1U; + } + } + + if ((reg & OCTOSPIM_PCR_IOLEN) != 0U) + { + /* The IO Low is enabled on this port */ + if ((reg & OCTOSPIM_PCR_IOLSRC_1) == (value & OCTOSPIM_PCR_IOLSRC_1)) + { + /* The IO Low correspond to the instance passed as parameter */ + if ((reg & OCTOSPIM_PCR_IOLSRC_0) == 0U) + { + cfg->IOLowPort = (OCTOSPIM_PCR_IOLEN | (index+1U)); + } + else + { + cfg->IOLowPort = (OCTOSPIM_PCR_IOHEN | (index+1U)); + } + } + } + + if ((reg & OCTOSPIM_PCR_IOHEN) != 0U) + { + /* The IO High is enabled on this port */ + if ((reg & OCTOSPIM_PCR_IOHSRC_1) == (value & OCTOSPIM_PCR_IOHSRC_1)) + { + /* The IO High correspond to the instance passed as parameter */ + if ((reg & OCTOSPIM_PCR_IOHSRC_0) == 0U) + { + cfg->IOHighPort = (OCTOSPIM_PCR_IOLEN | (index+1U)); + } + else + { + cfg->IOHighPort = (OCTOSPIM_PCR_IOHEN | (index+1U)); + } + } + } + } + } + + /* Return function status */ + return status; +} + +/** + @endcond + */ + +/** + * @} + */ + +#endif /* HAL_OSPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* OCTOSPI || OCTOSPI1 || OCTOSPI2 */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c new file mode 100644 index 0000000..aeb9933 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c @@ -0,0 +1,873 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Initialization and de-initialization functions. + * + Peripheral Control functions. + * + Interrupt Handling functions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### PWR peripheral overview ##### + ============================================================================== + [..] + (#) The Power control (PWR) provides an overview of the supply architecture + for the different power domains and of the supply configuration + controller. + In the H7 family, the number of power domains is different between + device lines. This difference is due to characteristics of each device. + + (#) Domain architecture overview for the different H7 lines: + (+) Dual core lines are STM32H745, STM32H747, STM32H755 and STM32H757. + These devices have 3 power domains (D1, D2 and D3). + The domain D1 contains a CPU (Cortex-M7), a Flash memory and some + peripherals. The D2 domain contains peripherals and a CPU + (Cortex-M4). The D3 domain contains the system control, I/O logic + and low-power peripherals. + (+) STM32H72x, STM32H73x, STM32H742, STM32H743, STM32H750 and STM32H753 + devices have 3 power domains (D1, D2 and D3). + The domain D1 contains a CPU (Cortex-M7), a Flash memory and some + peripherals. The D2 domain contains peripherals. The D3 domains + contains the system control, I/O logic and low-power peripherals. + (+) STM32H7Axxx and STM32H7Bxxx devices have 2 power domains (CD and SRD). + The core domain (CD) contains a CPU (Cortex-M7), a Flash + memory and peripherals. The SmartRun domain contains the system + control, I/O logic and low-power peripherals. + + (#) Every entity have low power mode as described below : + (#) The CPU low power modes are : + (+) CPU CRUN. + (+) CPU CSLEEP. + (+) CPU CSTOP. + (#) The domain low power modes are : + (+) DRUN. + (+) DSTOP. + (+) DSTANDBY. + (#) The SYSTEM low power modes are : + (+) RUN* : The Run* mode is entered after a POR reset and a wakeup from + Standby. In Run* mode, the performance is limited and the + system supply configuration shall be programmed. The system + enters Run mode only when the ACTVOSRDY bit in PWR control + status register 1 (PWR_CSR1) is set to 1. + (+) RUN. + (+) STOP. + (+) STANDBY. + + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Power management peripheral is active by default at startup level in + STM32h7xx lines. + + (#) Call HAL_PWR_EnableBkUpAccess() and HAL_PWR_DisableBkUpAccess() functions + to enable/disable access to the backup domain (RTC registers, RTC backup + data registers and backup SRAM). + + (#) Call HAL_PWR_ConfigPVD() after setting parameters to be configured (event + mode and voltage threshold) in order to set up the Power Voltage Detector, + then use HAL_PWR_EnablePVD() and HAL_PWR_DisablePVD() functions to start + and stop the PVD detection. + (+) PVD level could be one of the following values : + (++) 1V95 + (++) 2V1 + (++) 2V25 + (++) 2V4 + (++) 2V55 + (++) 2V7 + (++) 2V85 + (++) External voltage level + + (#) Call HAL_PWR_EnableWakeUpPin() and HAL_PWR_DisableWakeUpPin() functions + with the right parameter to configure the wake up pin polarity (Low or + High) and to enable and disable it. + + (#) Call HAL_PWR_EnterSLEEPMode() function to enter the current Core in SLEEP + mode. Wake-up from SLEEP mode could be following to an event or an + interrupt according to low power mode intrinsic request called (__WFI() + or __WFE()). + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in SLEEP mode with __WFE() entry. + + (#) Call HAL_PWR_EnterSTOPMode() function to enter the whole system to Stop 0 + mode for single core devices. For dual core devices, this API will enter + the domain (containing Cortex-Mx that executing this function) in DSTOP + mode. According to the used parameter, user could select the regulator to + be kept actif in low power mode and wake-up event type. + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in CSTOP mode with __WFE() entry. + + (#) Call HAL_PWR_EnterSTANDBYMode() function to enter the whole system in + STANDBY mode for single core devices. For dual core devices, this API + will enter the domain (containing Cortex-Mx that executing this function) + in DSTANDBY mode. + + (#) Call HAL_PWR_EnableSleepOnExit() and HAL_PWR_DisableSleepOnExit() APIs to + enable and disable the Cortex-Mx re-entring in SLEEP mode after an + interruption handling is over. + + (#) Call HAL_PWR_EnableSEVOnPend() and HAL_PWR_DisableSEVOnPend() functions + to configure the Cortex-Mx to wake-up after any pending event / interrupt + even if it's disabled or has insufficient priority to cause exception + entry. + + (#) Call HAL_PWR_PVD_IRQHandler() function to handle the PWR PVD interrupt + request. + + *** PWR HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in PWR HAL driver. + + (+) __HAL_PWR_VOLTAGESCALING_CONFIG() : Configure the main internal + regulator output voltage. + (+) __HAL_PWR_GET_FLAG() : Get the PWR pending flags. + (+) __HAL_PWR_CLEAR_FLAG() : Clear the PWR pending flags. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @addtogroup PWR_Private_Constants PWR Private Constants + * @{ + */ + +/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask + * @{ + */ +#if !defined (DUAL_CORE) +#define PVD_MODE_IT (0x00010000U) +#define PVD_MODE_EVT (0x00020000U) +#endif /* !defined (DUAL_CORE) */ + +#define PVD_RISING_EDGE (0x00000001U) +#define PVD_FALLING_EDGE (0x00000002U) +#define PVD_RISING_FALLING_EDGE (0x00000003U) +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions + * @brief Initialization and De-Initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and De-Initialization Functions ##### + =============================================================================== + [..] + This section provides functions allowing to deinitialize power peripheral. + + [..] + After system reset, the backup domain (RTC registers, RTC backup data + registers and backup SRAM) is protected against possible unwanted write + accesses. + The HAL_PWR_EnableBkUpAccess() function enables the access to the backup + domain. + The HAL_PWR_DisableBkUpAccess() function disables the access to the backup + domain. + +@endverbatim + * @{ + */ + +/** + * @brief Deinitialize the HAL PWR peripheral registers to their default reset + * values. + * @note This functionality is not available in this product. + * The prototype is kept just to maintain compatibility with other + * products. + * @retval None. + */ +void HAL_PWR_DeInit (void) +{ +} + +/** + * @brief Enable access to the backup domain (RTC registers, RTC backup data + * registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None. + */ +void HAL_PWR_EnableBkUpAccess (void) +{ + /* Enable access to RTC and backup registers */ + SET_BIT (PWR->CR1, PWR_CR1_DBP); +} + +/** + * @brief Disable access to the backup domain (RTC registers, RTC backup data + * registers and backup SRAM). + * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the + * Backup Domain Access should be kept enabled. + * @retval None. + */ +void HAL_PWR_DisableBkUpAccess (void) +{ + /* Disable access to RTC and backup registers */ + CLEAR_BIT (PWR->CR1, PWR_CR1_DBP); +} +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control Functions + * @brief Power Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control Functions ##### + =============================================================================== + [..] + This section provides functions allowing to control power peripheral. + + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PLS[7:0] bits in the PWR_CR1 + register). + + (+) A PVDO flag is available to indicate if VDD is higher or lower + than the PVD threshold. This event is internally connected to the EXTI + line 16 to generate an interrupt if enabled. + It is configurable through __HAL_PWR_PVD_EXTI_ENABLE_IT() macro. + + (+) The PVD is stopped in STANDBY mode. + + *** Wake-up pin configuration *** + ================================= + [..] + (+) Wake-up pin is used to wake up the system from STANDBY mode. + The pin pull is configurable through the WKUPEPR register to be in + No-pull, Pull-up and Pull-down. + The pin polarity is configurable through the WKUPEPR register to be + active on rising or falling edges. + + (+) There are up to six Wake-up pin in the STM32H7 devices family. + + *** Low Power modes configuration *** + ===================================== + [..] + The device present 3 principles low-power modes features: + (+) SLEEP mode : Cortex-Mx is stopped and all PWR domains are remaining + active (Powered and Clocked). + + (+) STOP mode : Cortex-Mx is stopped, clocks are stopped and the + regulator is running. The Main regulator or the LP + regulator could be selected. + + (+) STANDBY mode : All PWR domains enter DSTANDBY mode and the VCORE + supply regulator is powered off. + + *** SLEEP mode *** + ================== + [..] + (+) Entry: + The SLEEP mode is entered by using the HAL_PWR_EnterSLEEPMode(Regulator, + SLEEPEntry) function. + + (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction. + (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction. + + -@@- The Regulator parameter is not used for the STM32H7 family + and is kept as parameter just to maintain compatibility with the + lower power families (STM32L). + + (+) Exit: + Any peripheral interrupt acknowledged by the nested vectored interrupt + controller (NVIC) can wake up the device from SLEEP mode. + + *** STOP mode *** + ================= + [..] + In system STOP mode, all clocks in the 1.2V domain are stopped, the PLL, + the HSI, and the HSE RC oscillators are disabled. Internal SRAM and + register contents are preserved. + The voltage regulator can be configured either in normal or low-power mode. + To minimize the consumption in STOP mode, FLASH can be powered off before + entering the STOP mode using the HAL_PWREx_EnableFlashPowerDown() function. + It can be switched on again by software after exiting the STOP mode using + the HAL_PWREx_DisableFlashPowerDown() function. + + (+) Entry: + The STOP mode is entered using the HAL_PWR_EnterSTOPMode(Regulator, + STOPEntry) function with: + + (++) Regulator: + (+++) PWR_MAINREGULATOR_ON: Main regulator ON. + (+++) PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON. + + (++) STOPEntry: + (+++) PWR_STOPENTRY_WFI: enter STOP mode with WFI instruction. + (+++) PWR_STOPENTRY_WFE: enter STOP mode with WFE instruction. + + (+) Exit: + Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + *** STANDBY mode *** + ==================== + [..] + (+) + The system STANDBY mode allows to achieve the lowest power consumption. + It is based on the Cortex-Mx deep SLEEP mode, with the voltage regulator + disabled. The system is consequently powered off. The PLL, the HSI + oscillator and the HSE oscillator are also switched off. SRAM and register + contents are lost except for the RTC registers, RTC backup registers, + backup SRAM and standby circuitry. + + [..] + The voltage regulator is OFF. + + (++) Entry: + (+++) The STANDBY mode is entered using the HAL_PWR_EnterSTANDBYMode() + function. + + (++) Exit: + (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), + RTC wakeup, tamper event, time stamp event, external reset in NRST + pin, IWDG reset. + + *** Auto-wakeup (AWU) from low-power mode *** + ============================================= + [..] + (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an + RTC Wakeup event, a tamper event or a time-stamp event, without + depending on an external interrupt (Auto-wakeup mode). + + (+) RTC auto-wakeup (AWU) from the STOP and STANDBY modes + + (++) To wake up from the STOP mode with an RTC alarm event, it is + necessary to configure the RTC to generate the RTC alarm using the + HAL_RTC_SetAlarm_IT() function. + + (++) To wake up from the STOP mode with an RTC Tamper or time stamp event, + it is necessary to configure the RTC to detect the tamper or time + stamp event using the HAL_RTCEx_SetTimeStamp_IT() or + HAL_RTCEx_SetTamper_IT() functions. + + (++) To wake up from the STOP mode with an RTC WakeUp event, it is + necessary to configure the RTC to generate the RTC WakeUp event + using the HAL_RTCEx_SetWakeUpTimer_IT() function. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the event mode and the voltage threshold detected by the + * Programmable Voltage Detector(PVD). + * @param sConfigPVD : Pointer to an PWR_PVDTypeDef structure that contains + * the configuration information for the PVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @note For dual core devices, please ensure to configure the EXTI lines for + * the different Cortex-Mx through PWR_Exported_Macro provided by this + * driver. All combination are allowed: wake up only Cortex-M7, wake up + * only Cortex-M4 or wake up Cortex-M7 and Cortex-M4. + * @retval None. + */ +void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the PVD configuration parameter */ + if (sConfigPVD == NULL) + { + return; + } + + /* Check the parameters */ + assert_param (IS_PWR_PVD_LEVEL (sConfigPVD->PVDLevel)); + assert_param (IS_PWR_PVD_MODE (sConfigPVD->Mode)); + + /* Set PLS[7:5] bits according to PVDLevel value */ + MODIFY_REG (PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel); + + /* Clear previous config */ +#if !defined (DUAL_CORE) + __HAL_PWR_PVD_EXTI_DISABLE_EVENT (); + __HAL_PWR_PVD_EXTI_DISABLE_IT (); +#endif /* !defined (DUAL_CORE) */ + + __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE (); + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE (); + +#if !defined (DUAL_CORE) + /* Interrupt mode configuration */ + if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) + { + __HAL_PWR_PVD_EXTI_ENABLE_IT (); + } + + /* Event mode configuration */ + if ((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) + { + __HAL_PWR_PVD_EXTI_ENABLE_EVENT (); + } +#endif /* !defined (DUAL_CORE) */ + + /* Rising edge configuration */ + if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE (); + } + + /* Falling edge configuration */ + if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) + { + __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE (); + } +} + +/** + * @brief Enable the Programmable Voltage Detector (PVD). + * @retval None. + */ +void HAL_PWR_EnablePVD (void) +{ + /* Enable the power voltage detector */ + SET_BIT (PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Disable the Programmable Voltage Detector (PVD). + * @retval None. + */ +void HAL_PWR_DisablePVD (void) +{ + /* Disable the power voltage detector */ + CLEAR_BIT (PWR->CR1, PWR_CR1_PVDEN); +} + +/** + * @brief Enable the WakeUp PINx functionality. + * @param WakeUpPinPolarity : Specifies which Wake-Up pin to enable. + * This parameter can be one of the following legacy values, which + * sets the default (rising edge): + * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6. + * or one of the following values where the user can explicitly states + * the enabled pin and the chosen polarity: + * @arg PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW, + * PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW, + * PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, + * PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW, + * PWR_WAKEUP_PIN5_HIGH, PWR_WAKEUP_PIN5_LOW, + * PWR_WAKEUP_PIN6_HIGH, PWR_WAKEUP_PIN6_LOW. + * @note PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent. + * @note The PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, PWR_WAKEUP_PIN5_HIGH + * and PWR_WAKEUP_PIN5_LOW are available only for devices that includes + * GPIOI port. + * @retval None. + */ +void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity) +{ + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_PIN (WakeUpPinPolarity)); + + /* + Enable and Specify the Wake-Up pin polarity and the pull configuration + for the event detection (rising or falling edge). + */ + MODIFY_REG (PWR->WKUPEPR, PWR_EWUP_MASK, WakeUpPinPolarity); +} + +/** + * @brief Disable the WakeUp PINx functionality. + * @param WakeUpPinx : Specifies the Power Wake-Up pin to disable. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, + * PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6, + * PWR_WAKEUP_PIN1_HIGH, PWR_WAKEUP_PIN1_LOW, + * PWR_WAKEUP_PIN2_HIGH, PWR_WAKEUP_PIN2_LOW, + * PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, + * PWR_WAKEUP_PIN4_HIGH, PWR_WAKEUP_PIN4_LOW, + * PWR_WAKEUP_PIN5_HIGH, PWR_WAKEUP_PIN5_LOW, + * PWR_WAKEUP_PIN6_HIGH, PWR_WAKEUP_PIN6_LOW. + * @note The PWR_WAKEUP_PIN3_HIGH, PWR_WAKEUP_PIN3_LOW, PWR_WAKEUP_PIN5_HIGH + * and PWR_WAKEUP_PIN5_LOW are available only for devices that includes + * GPIOI port. + * @retval None. + */ +void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx) +{ + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_PIN (WakeUpPinx)); + + /* Disable the wake up pin selected */ + CLEAR_BIT (PWR->WKUPEPR, (PWR_WKUPEPR_WKUPEN & WakeUpPinx)); +} + +/** + * @brief Enter the current core in SLEEP mode (CSLEEP). + * @param Regulator : Specifies the regulator state in SLEEP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : SLEEP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : SLEEP mode with low power + * regulator ON. + * @note This parameter is not used for the STM32H7 family and is kept as + * parameter just to maintain compatibility with the lower power + * families. + * @param SLEEPEntry : Specifies if SLEEP mode is entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_SLEEPENTRY_WFI : enter SLEEP mode with WFI instruction. + * @arg PWR_SLEEPENTRY_WFE : enter SLEEP mode with WFE instruction. + * @note Ensure to clear pending events before calling this API through + * HAL_PWREx_ClearPendingEvent() when the SLEEP entry is WFE. + * @retval None. + */ +void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_SLEEP_ENTRY (SLEEPEntry)); + + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Select SLEEP mode entry */ + if (SLEEPEntry == PWR_SLEEPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } +} + +/** + * @brief Enter STOP mode. + * @note For single core devices, this API will enter the system in STOP mode + * with all domains in DSTOP, if RUN_D3/RUN_SRD bit in CPUCR register is + * cleared. + * For dual core devices, this API will enter the domain (containing + * Cortex-Mx that executing this function) in DSTOP mode. If all + * Cortex-Mx domains are in DSTOP and RUN_D3 bit in CPUCR register is + * cleared, all the system will enter in STOP mode. + * @param Regulator : Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power + * regulator ON. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction. + * @note In System STOP mode, all I/O pins keep the same state as in Run mode. + * @note When exiting System STOP mode by issuing an interrupt or a wakeup + * event, the HSI RC oscillator is selected as default system wakeup + * clock. + * @note In System STOP mode, when the voltage regulator operates in low + * power mode, an additional startup delay is incurred when the system + * is waking up. By keeping the internal regulator ON during STOP mode, + * the consumption is higher although the startup time is reduced. + * @retval None. + */ +void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_STOP_ENTRY (STOPEntry)); + + /* Select the regulator state in STOP mode */ + MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator); + + /* Configure the PWR mode for the different Domains */ +#if defined (DUAL_CORE) + /* Check CPU ID */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Keep DSTOP mode when Cortex-M7 enters DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + } + else + { + /* Keep DSTOP mode when Cortex-M4 enters DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D2 | PWR_CPUCR_PDDS_D3)); + } +#else /* Single core devices */ + /* Keep DSTOP mode when Cortex-M7 enter in DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + +#if defined (PWR_CPUCR_PDDS_D2) + /* Keep DSTOP mode when Cortex-M7 enter in DEEP-SLEEP */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2); +#endif /* PWR_CPUCR_PDDS_D2 */ +#endif /* defined (DUAL_CORE) */ + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* Select STOP mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} + +/** + * @brief Enter STANDBY mode. + * @note For single core devices, this API will enter the system in STANDBY + * mode with all domains in DSTANDBY, if RUN_D3/RUN_SRD bit in CPUCR + * register is cleared. + * For dual core devices, this API will enter the domain (containing + * Cortex-Mx that executing this function) in DSTANDBY mode. If all + * Cortex-Mx domains are in DSTANDBY and RUN_D3 bit in CPUCR register + * is cleared, all the system will enter in STANDBY mode. + * @note The system enters Standby mode only when all domains are in DSTANDBY. + * @note When the System exit STANDBY mode by issuing an interrupt or a + * wakeup event, the HSI RC oscillator is selected as system clock. + * @note It is recommended to disable all regulators before entring STANDBY + * mode for power consumption saving purpose. + * @retval None. + */ +void HAL_PWR_EnterSTANDBYMode (void) +{ + /* Configure the PWR mode for the different Domains */ +#if defined (DUAL_CORE) + /* Check CPU ID */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + SET_BIT (PWR->CPU2CR, (PWR_CPU2CR_PDDS_D1 | PWR_CPU2CR_PDDS_D3)); + } + else + { + /* Enter DSTANDBY mode when Cortex-M4 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D2 | PWR_CPUCR_PDDS_D3)); + SET_BIT (PWR->CPU2CR, (PWR_CPU2CR_PDDS_D2 | PWR_CPU2CR_PDDS_D3)); + } +#else /* Single core devices */ + /* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, (PWR_CPUCR_PDDS_D1 | PWR_CPUCR_PDDS_D3)); + +#if defined (PWR_CPUCR_PDDS_D2) + /* Enter DSTANDBY mode when Cortex-M7 enters DEEP-SLEEP */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2); +#endif /* PWR_CPUCR_PDDS_D2 */ +#endif /* defined (DUAL_CORE) */ + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* This option is used to ensure that store operations are completed */ +#if defined (__CC_ARM) + __force_stores(); +#endif /* defined (__CC_ARM) */ + + /* Request Wait For Interrupt */ + __WFI (); +} + +/** + * @brief Indicate Sleep-On-Exit feature when returning from Handler mode to + * Thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters SLEEP mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run + * only on interruptions handling. + * @retval None. + */ +void HAL_PWR_EnableSleepOnExit (void) +{ + /* Set SLEEPONEXIT bit of Cortex-Mx System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Disable Sleep-On-Exit feature when returning from Handler mode to + * Thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters SLEEP mode when an interruption handling is over. + * @retval None + */ +void HAL_PWR_DisableSleepOnExit (void) +{ + /* Clear SLEEPONEXIT bit of Cortex-Mx System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enable CORTEX SEVONPEND feature. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, any + * pending event / interrupt even if it's disabled or has insufficient + * priority to cause exception entry wakes up the Cortex-Mx. + * @retval None. + */ +void HAL_PWR_EnableSEVOnPend (void) +{ + /* Set SEVONPEND bit of Cortex-Mx System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Disable CORTEX SEVONPEND feature. + * @note Resets SEVONPEND bit of SCR register. When this bit is reset, only + * enabled pending causes exception entry wakes up the Cortex-Mx. + * @retval None. + */ +void HAL_PWR_DisableSEVOnPend (void) +{ + /* Clear SEVONPEND bit of Cortex System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} +/** + * @} + */ + +/** @defgroup PWR_Exported_Functions_Group3 Interrupt Handling Functions + * @brief Interrupt Handling functions + * +@verbatim + =============================================================================== + ##### Interrupt Handling Functions ##### + =============================================================================== + [..] + This section provides functions allowing to handle the PVD pending + interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_AVD_IRQHandler(). + * @retval None. + */ +void HAL_PWR_PVD_IRQHandler (void) +{ +#if defined (DUAL_CORE) + /* Check Cortex-Mx ID */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Check PWR EXTI D1 flag */ + if(__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U) + { + /* Clear PWR EXTI D1 pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG (); + + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + } + } + else + { + /* Check PWR EXTI D2 flag */ + if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U) + { + /* Clear PWR EXTI D2 pending bit */ + __HAL_PWR_PVD_EXTID2_CLEAR_FLAG (); + + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + } + } +#else /* Single core devices */ + /* PVD EXTI line interrupt detected */ + if (__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U) + { + /* Clear PWR EXTI pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG (); + + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + } +#endif /* defined (DUAL_CORE) */ +} + +/** + * @brief PWR PVD interrupt callback. + * @retval None. + */ +__weak void HAL_PWR_PVDCallback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWR_PVDCallback can be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c new file mode 100644 index 0000000..5d51ceb --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c @@ -0,0 +1,2142 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of PWR extension peripheral: + * + Peripheral Extended features functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Call HAL_PWREx_ConfigSupply() function to configure the regulator supply + with the following different setups according to hardware (support SMPS): + (+) PWR_DIRECT_SMPS_SUPPLY + (+) PWR_SMPS_1V8_SUPPLIES_LDO + (+) PWR_SMPS_2V5_SUPPLIES_LDO + (+) PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO + (+) PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO + (+) PWR_SMPS_1V8_SUPPLIES_EXT + (+) PWR_SMPS_2V5_SUPPLIES_EXT + (+) PWR_LDO_SUPPLY + (+) PWR_EXTERNAL_SOURCE_SUPPLY + + (#) Call HAL_PWREx_GetSupplyConfig() function to get the current supply setup. + + (#) Call HAL_PWREx_ControlVoltageScaling() function to configure the main + internal regulator output voltage. The voltage scaling could be one of + the following scales : + (+) PWR_REGULATOR_VOLTAGE_SCALE0 + (+) PWR_REGULATOR_VOLTAGE_SCALE1 + (+) PWR_REGULATOR_VOLTAGE_SCALE2 + (+) PWR_REGULATOR_VOLTAGE_SCALE3 + + (#) Call HAL_PWREx_GetVoltageRange() function to get the current output + voltage applied to the main regulator. + + (#) Call HAL_PWREx_ControlStopModeVoltageScaling() function to configure the + main internal regulator output voltage in STOP mode. The voltage scaling + in STOP mode could be one of the following scales : + (+) PWR_REGULATOR_SVOS_SCALE3 + (+) PWR_REGULATOR_SVOS_SCALE4 + (+) PWR_REGULATOR_SVOS_SCALE5 + + (#) Call HAL_PWREx_GetStopModeVoltageRange() function to get the current + output voltage applied to the main regulator in STOP mode. + + (#) Call HAL_PWREx_EnterSTOP2Mode() function to enter the system in STOP mode + with core domain in D2STOP mode. This API is used only for STM32H7Axxx + and STM32H7Bxxx devices. + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in DEEP-SLEEP mode with __WFE() entry. + + (#) Call HAL_PWREx_EnterSTOPMode() function to enter the selected domain in + DSTOP mode. Call this API with all available power domains to enter the + system in STOP mode. + Please ensure to clear all CPU pending events by calling + HAL_PWREx_ClearPendingEvent() function when trying to enter the Cortex-Mx + in DEEP-SLEEP mode with __WFE() entry. + + (#) Call HAL_PWREx_ClearPendingEvent() function always before entring the + Cortex-Mx in any low power mode (SLEEP/DEEP-SLEEP) using WFE entry. + + (#) Call HAL_PWREx_EnterSTANDBYMode() function to enter the selected domain + in DSTANDBY mode. Call this API with all available power domains to enter + the system in STANDBY mode. + + (#) Call HAL_PWREx_ConfigD3Domain() function to setup the D3/SRD domain state + (RUN/STOP) when the system enter to low power mode. + + (#) Call HAL_PWREx_ClearDomainFlags() function to clear the CPU flags for the + selected power domain. This API is used only for dual core devices. + + (#) Call HAL_PWREx_HoldCore() and HAL_PWREx_ReleaseCore() functions to hold + and release the selected CPU and and their domain peripherals when + exiting STOP mode. These APIs are used only for dual core devices. + + (#) Call HAL_PWREx_EnableFlashPowerDown() and + HAL_PWREx_DisableFlashPowerDown() functions to enable and disable the + Flash Power Down in STOP mode. + + (#) Call HAL_PWREx_EnableMemoryShutOff() and + HAL_PWREx_DisableMemoryShutOff() functions to enable and disable the + memory block shut-off in DStop or DStop2. These APIs are used only for + STM32H7Axxx and STM32H7Bxxx lines. + + (#) Call HAL_PWREx_EnableWakeUpPin() and HAL_PWREx_DisableWakeUpPin() + functions to enable and disable the Wake-up pin functionality for + the selected pin. + + (#) Call HAL_PWREx_GetWakeupFlag() and HAL_PWREx_ClearWakeupFlag() + functions to manage wake-up flag for the selected pin. + + (#) Call HAL_PWREx_WAKEUP_PIN_IRQHandler() function to handle all wake-up + pins interrupts. + + (#) Call HAL_PWREx_EnableBkUpReg() and HAL_PWREx_DisableBkUpReg() functions + to enable and disable the backup domain regulator. + + (#) Call HAL_PWREx_EnableUSBReg(), HAL_PWREx_DisableUSBReg(), + HAL_PWREx_EnableUSBVoltageDetector() and + HAL_PWREx_DisableUSBVoltageDetector() functions to manage USB power + regulation functionalities. + + (#) Call HAL_PWREx_EnableBatteryCharging() and + HAL_PWREx_DisableBatteryCharging() functions to enable and disable the + battery charging feature with the selected resistor. + + (#) Call HAL_PWREx_EnableAnalogBooster() and + HAL_PWREx_DisableAnalogBooster() functions to enable and disable the + AVD boost feature when the VDD supply voltage is below 2V7. + + (#) Call HAL_PWREx_EnableMonitoring() and HAL_PWREx_DisableMonitoring() + functions to enable and disable the VBAT and Temperature monitoring. + When VBAT and Temperature monitoring feature is enables, use + HAL_PWREx_GetTemperatureLevel() and HAL_PWREx_GetVBATLevel() to get + respectively the Temperature level and VBAT level. + + (#) Call HAL_PWREx_GetMMCVoltage() and HAL_PWREx_DisableMonitoring() + function to get VDDMMC voltage level. This API is used only for + STM32H7Axxx and STM32H7Bxxx lines + + (#) Call HAL_PWREx_ConfigAVD() after setting parameter to be configured + (event mode and voltage threshold) in order to set up the Analog Voltage + Detector then use HAL_PWREx_EnableAVD() and HAL_PWREx_DisableAVD() + functions to start and stop the AVD detection. + (+) AVD level could be one of the following values : + (++) 1V7 + (++) 2V1 + (++) 2V5 + (++) 2V8 + + (#) Call HAL_PWREx_PVD_AVD_IRQHandler() function to handle the PWR PVD and + AVD interrupt request. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @addtogroup PWREx_Private_Constants + * @{ + */ + +/** @defgroup PWREx_AVD_Mode_Mask PWR Extended AVD Mode Mask + * @{ + */ +#define AVD_MODE_IT (0x00010000U) +#define AVD_MODE_EVT (0x00020000U) +#define AVD_RISING_EDGE (0x00000001U) +#define AVD_FALLING_EDGE (0x00000002U) +#define AVD_RISING_FALLING_EDGE (0x00000003U) +/** + * @} + */ + +/** @defgroup PWREx_REG_SET_TIMEOUT PWR Extended Flag Setting Time Out Value + * @{ + */ +#define PWR_FLAG_SETTING_DELAY (1000U) +/** + * @} + */ + +/** @defgroup PWREx_WakeUp_Pins_Offsets PWREx Wake-Up Pins masks and offsets + * @{ + */ +/* Wake-Up Pins EXTI register mask */ +#if defined (EXTI_IMR2_IM57) +#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\ + EXTI_IMR2_IM57 | EXTI_IMR2_IM58 |\ + EXTI_IMR2_IM59 | EXTI_IMR2_IM60) +#else +#define PWR_EXTI_WAKEUP_PINS_MASK (EXTI_IMR2_IM55 | EXTI_IMR2_IM56 |\ + EXTI_IMR2_IM58 | EXTI_IMR2_IM60) +#endif /* defined (EXTI_IMR2_IM57) */ + +/* Wake-Up Pins PWR Pin Pull shift offsets */ +#define PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET (2U) +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Functions PWREx Exported Functions + * @{ + */ + +/** @defgroup PWREx_Exported_Functions_Group1 Power Supply Control Functions + * @brief Power supply control functions + * +@verbatim + =============================================================================== + ##### Power supply control functions ##### + =============================================================================== + [..] + (#) When the system is powered on, the POR monitors VDD supply. Once VDD is + above the POR threshold level, the voltage regulator is enabled in the + default supply configuration: + (+) The Voltage converter output level is set at 1V0 in accordance with + the VOS3 level configured in PWR (D3/SRD) domain control register + (PWR_D3CR/PWR_SRDCR). + (+) The system is kept in reset mode as long as VCORE is not ok. + (+) Once VCORE is ok, the system is taken out of reset and the HSI + oscillator is enabled. + (+) Once the oscillator is stable, the system is initialized: Flash memory + and option bytes are loaded and the CPU starts in Run* mode. + (+) The software shall then initialize the system including supply + configuration programming using the HAL_PWREx_ConfigSupply(). + (+) Once the supply configuration has been configured, the + HAL_PWREx_ConfigSupply() function checks the ACTVOSRDY bit in PWR + control status register 1 (PWR_CSR1) to guarantee a valid voltage + levels: + (++) As long as ACTVOSRDY indicates that voltage levels are invalid, the + system is in limited Run* mode, write accesses to the RAMs are not + permitted and VOS shall not be changed. + (++) Once ACTVOSRDY indicates that voltage levels are valid, the system + is in normal Run mode, write accesses to RAMs are allowed and VOS + can be changed. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the system Power Supply. + * @param SupplySource : Specifies the Power Supply source to set after a + * system startup. + * This parameter can be one of the following values : + * @arg PWR_DIRECT_SMPS_SUPPLY : The SMPS supplies the Vcore Power + * Domains. The LDO is Bypassed. + * @arg PWR_SMPS_1V8_SUPPLIES_LDO : The SMPS 1.8V output supplies + * the LDO. The Vcore Power Domains + * are supplied from the LDO. + * @arg PWR_SMPS_2V5_SUPPLIES_LDO : The SMPS 2.5V output supplies + * the LDO. The Vcore Power Domains + * are supplied from the LDO. + * @arg PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO : The SMPS 1.8V output + * supplies external + * circuits and the LDO. + * The Vcore Power Domains + * are supplied from the + * LDO. + * @arg PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO : The SMPS 2.5V output + * supplies external + * circuits and the LDO. + * The Vcore Power Domains + * are supplied from the + * LDO. + * @arg PWR_SMPS_1V8_SUPPLIES_EXT : The SMPS 1.8V output supplies + * external circuits. The LDO is + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @arg PWR_SMPS_2V5_SUPPLIES_EXT : The SMPS 2.5V output supplies + * external circuits. The LDO is + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @arg PWR_LDO_SUPPLY : The LDO regulator supplies the Vcore Power + * Domains. The SMPS regulator is Bypassed. + * @arg PWR_EXTERNAL_SOURCE_SUPPLY : The SMPS and the LDO are + * Bypassed. The Vcore Power + * Domains are supplied from + * external source. + * @note The PWR_LDO_SUPPLY and PWR_EXTERNAL_SOURCE_SUPPLY are used by all + * H7 lines. + * The PWR_DIRECT_SMPS_SUPPLY, PWR_SMPS_1V8_SUPPLIES_LDO, + * PWR_SMPS_2V5_SUPPLIES_LDO, PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO, + * PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO, PWR_SMPS_1V8_SUPPLIES_EXT and + * PWR_SMPS_2V5_SUPPLIES_EXT are used only for lines that supports SMPS + * regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSupply (uint32_t SupplySource) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param (IS_PWR_SUPPLY (SupplySource)); + + /* Check if supply source was configured */ +#if defined (PWR_FLAG_SCUEN) + if (__HAL_PWR_GET_FLAG (PWR_FLAG_SCUEN) == 0U) +#else + if ((PWR->CR3 & (PWR_CR3_SMPSEN | PWR_CR3_LDOEN | PWR_CR3_BYPASS)) != (PWR_CR3_SMPSEN | PWR_CR3_LDOEN)) +#endif /* defined (PWR_FLAG_SCUEN) */ + { + /* Check supply configuration */ + if ((PWR->CR3 & PWR_SUPPLY_CONFIG_MASK) != SupplySource) + { + /* Supply configuration update locked, can't apply a new supply config */ + return HAL_ERROR; + } + else + { + /* Supply configuration update locked, but new supply configuration + matches with old supply configuration : nothing to do + */ + return HAL_OK; + } + } + + /* Set the power supply configuration */ + MODIFY_REG (PWR->CR3, PWR_SUPPLY_CONFIG_MASK, SupplySource); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + +#if defined (SMPS) + /* When the SMPS supplies external circuits verify that SDEXTRDY flag is set */ + if ((SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) || + (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO) || + (SupplySource == PWR_SMPS_1V8_SUPPLIES_EXT) || + (SupplySource == PWR_SMPS_2V5_SUPPLIES_EXT)) + { + /* Get the current tick number */ + tickstart = HAL_GetTick (); + + /* Wait till SMPS external supply ready flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_SMPSEXTRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + } +#endif /* defined (SMPS) */ + + return HAL_OK; +} + +/** + * @brief Get the power supply configuration. + * @retval The supply configuration. + */ +uint32_t HAL_PWREx_GetSupplyConfig (void) +{ + return (PWR->CR3 & PWR_SUPPLY_CONFIG_MASK); +} + +/** + * @brief Configure the main internal regulator output voltage. + * @param VoltageScaling : Specifies the regulator output voltage to achieve + * a tradeoff between performance and power + * consumption. + * This parameter can be one of the following values : + * @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output + * Scale 0 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output + * range 1 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output + * range 2 mode. + * @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output + * range 3 mode. + * @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is + * only possible when Vcore is supplied from LDO (Low DropOut). The + * SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE() + * macro before configuring Voltage Scale 0. + * To enter low power mode , and if current regulator voltage is + * Voltage Scale 0 then first switch to Voltage Scale 1 before entering + * low power mode. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling (uint32_t VoltageScaling) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR_VOLTAGE (VoltageScaling)); + + /* Get the voltage scaling */ + if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == VoltageScaling) + { + /* Old and new voltage scaling configuration match : nothing to do */ + return HAL_OK; + } + +#if defined (PWR_SRDCR_VOS) + /* Set the voltage range */ + MODIFY_REG (PWR->SRDCR, PWR_SRDCR_VOS, VoltageScaling); +#else +#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */ + if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE0) + { + if ((PWR->CR3 & PWR_CR3_LDOEN) == PWR_CR3_LDOEN) + { + /* Set the voltage range */ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + /* Enable the PWR overdrive */ + SET_BIT (SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); + } + else + { + /* The voltage scale 0 is only possible when LDO regulator is enabled */ + return HAL_ERROR; + } + } + else + { + if ((PWR->CSR1 & PWR_CSR1_ACTVOS) == PWR_REGULATOR_VOLTAGE_SCALE1) + { + if ((SYSCFG->PWRCR & SYSCFG_PWRCR_ODEN) != 0U) + { + /* Disable the PWR overdrive */ + CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick () - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + } + } + + /* Set the voltage range */ + MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, VoltageScaling); + } +#else /* STM32H72xxx and STM32H73xxx lines */ + /* Set the voltage range */ + MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, VoltageScaling); +#endif /* defined (SYSCFG_PWRCR_ODEN) */ +#endif /* defined (PWR_SRDCR_VOS) */ + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till voltage level flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_ACTVOSRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Get the main internal regulator output voltage. Reflecting the last + * VOS value applied to the PMU. + * @retval The current applied VOS selection. + */ +uint32_t HAL_PWREx_GetVoltageRange (void) +{ + /* Get the active voltage scaling */ + return (PWR->CSR1 & PWR_CSR1_ACTVOS); +} + +/** + * @brief Configure the main internal regulator output voltage in STOP mode. + * @param VoltageScaling : Specifies the regulator output voltage when the + * system enters Stop mode to achieve a tradeoff between performance + * and power consumption. + * This parameter can be one of the following values: + * @arg PWR_REGULATOR_SVOS_SCALE3 : Regulator voltage output range + * 3 mode. + * @arg PWR_REGULATOR_SVOS_SCALE4 : Regulator voltage output range + * 4 mode. + * @arg PWR_REGULATOR_SVOS_SCALE5 : Regulator voltage output range + * 5 mode. + * @note The Stop mode voltage scaling for SVOS4 and SVOS5 sets the voltage + * regulator in Low-power (LP) mode to further reduce power consumption. + * When preselecting SVOS3, the use of the voltage regulator low-power + * mode (LP) can be selected by LPDS register bit. + * @note The selected SVOS4 and SVOS5 levels add an additional startup delay + * when exiting from system Stop mode. + * @retval HAL Status. + */ +HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling (uint32_t VoltageScaling) +{ + /* Check the parameters */ + assert_param (IS_PWR_STOP_MODE_REGULATOR_VOLTAGE (VoltageScaling)); + + /* Return the stop mode voltage range */ + MODIFY_REG (PWR->CR1, PWR_CR1_SVOS, VoltageScaling); + + return HAL_OK; +} + +/** + * @brief Get the main internal regulator output voltage in STOP mode. + * @retval The actual applied VOS selection. + */ +uint32_t HAL_PWREx_GetStopModeVoltageRange (void) +{ + /* Return the stop voltage scaling */ + return (PWR->CR1 & PWR_CR1_SVOS); +} +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group2 Low Power Control Functions + * @brief Low power control functions + * +@verbatim + =============================================================================== + ##### Low power control functions ##### + =============================================================================== + + *** Domains Low Power modes configuration *** + ============================================= + [..] + This section provides the extended low power mode control APIs. + The system presents 3 principles domains (D1, D2 and D3) that can be + operated in low-power modes (DSTOP or DSTANDBY mode): + + (+) DSTOP mode to enters a domain to STOP mode: + (++) D1 domain and/or D2 domain enters DSTOP mode only when the CPU + subsystem is in CSTOP mode and has allocated peripheral in the + domain. + In DSTOP mode the domain bus matrix clock is stopped. + (++) The system enters STOP mode using one of the following scenarios: + (+++) D1 domain enters DSTANDBY mode (powered off) and D2, D3 domains + enter DSTOP mode. + (+++) D2 domain enters DSTANDBY mode (powered off) and D1, D3 domains + enter DSTOP mode. + (+++) D3 domain enters DSTANDBY mode (powered off) and D1, D2 domains + enter DSTOP mode. + (+++) D1 and D2 domains enter DSTANDBY mode (powered off) and D3 domain + enters DSTOP mode. + (+++) D1 and D3 domains enter DSTANDBY mode (powered off) and D2 domain + enters DSTOP mode. + (+++) D2 and D3 domains enter DSTANDBY mode (powered off) and D1 domain + enters DSTOP mode. + (+++) D1, D2 and D3 domains enter DSTOP mode. + (++) When the system enters STOP mode, the clocks are stopped and the + regulator is running in main or low power mode. + (++) D3 domain can be kept in Run mode regardless of the CPU status when + enter STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function. + + (+) DSTANDBY mode to enters a domain to STANDBY mode: + (++) The DSTANDBY mode is entered when the PDDS_Dn bit in PWR CPU control + register (PWR_CPUCR) for the Dn domain selects Standby mode. + (++) The system enters STANDBY mode only when D1, D2 and D3 domains enter + DSTANDBY mode. Consequently the VCORE supply regulator is powered + off. + + *** DSTOP mode *** + ================== + [..] + In DStop mode the domain bus matrix clock is stopped. + The Flash memory can enter low-power Stop mode when it is enabled through + FLPS in PWR_CR1 register. This allows a trade-off between domain DStop + restart time and low power consumption. + [..] + In DStop mode domain peripherals using the LSI or LSE clock and + peripherals having a kernel clock request are still able to operate. + [..] + Before entering DSTOP mode it is recommended to call SCB_CleanDCache + function in order to clean the D-Cache and guarantee the data integrity + for the SRAM memories. + + (+) Entry: + The DSTOP mode is entered using the HAL_PWREx_EnterSTOPMode(Regulator, + STOPEntry, Domain) function with: + (++) Regulator: + (+++) PWR_MAINREGULATOR_ON : Main regulator ON. + (+++) PWR_LOWPOWERREGULATOR_ON : Low Power regulator ON. + (++) STOPEntry: + (+++) PWR_STOPENTRY_WFI : enter STOP mode with WFI instruction + (+++) PWR_STOPENTRY_WFE : enter STOP mode with WFE instruction + (++) Domain: + (+++) PWR_D1_DOMAIN : Enters D1/CD domain to DSTOP mode. + (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTOP mode. + (+++) PWR_D3_DOMAIN : Enters D3/SRD domain to DSTOP mode. + + (+) Exit: + Any EXTI Line (Internal or External) configured in Interrupt/Event mode. + + *** DSTANDBY mode *** + ===================== + [..] + In DStandby mode: + (+) The domain bus matrix clock is stopped. + (+) The domain is powered down and the domain RAM and register contents + are lost. + [..] + Before entering DSTANDBY mode it is recommended to call SCB_CleanDCache + function in order to clean the D-Cache and guarantee the data integrity + for the SRAM memories. + + (+) Entry: + The DSTANDBY mode is entered using the HAL_PWREx_EnterSTANDBYMode + (Domain) function with: + (++) Domain: + (+++) PWR_D1_DOMAIN : Enters D1/CD domain to DSTANDBY mode. + (+++) PWR_D2_DOMAIN : Enters D2 domain to DSTANDBY mode. + (+++) PWR_D3_DOMAIN : Enters D3/SRD domain to DSTANDBY mode. + + (+) Exit: + WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC + wakeup, tamper event, time stamp event, external reset in NRST pin, + IWDG reset. + + *** Keep D3/SRD in RUN mode *** + =============================== + [..] + D3/SRD domain can be kept in Run mode regardless of the CPU status when + entering STOP mode by using HAL_PWREx_ConfigD3Domain(D3State) function + with : + (+) D3State: + (++) PWR_D3_DOMAIN_STOP : D3/SDR domain follows the CPU sub-system + mode. + (++) PWR_D3_DOMAIN_RUN : D3/SRD domain remains in Run mode regardless + of CPU subsystem mode. + + *** FLASH Power Down configuration **** + ======================================= + [..] + By setting the FLPS bit in the PWR_CR1 register using the + HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters + power down mode when the device enters STOP mode. When the Flash memory is + in power down mode, an additional startup delay is incurred when waking up + from STOP mode. + + *** Wakeup Pins configuration **** + =================================== + [..] + Wakeup pins allow the system to exit from Standby mode. The configuration + of wakeup pins is done with the HAL_PWREx_EnableWakeUpPin(sPinParams) + function with: + (+) sPinParams: structure to enable and configure a wakeup pin: + (++) WakeUpPin: Wakeup pin to be enabled. + (++) PinPolarity: Wakeup pin polarity (rising or falling edge). + (++) PinPull: Wakeup pin pull (no pull, pull-up or pull-down). + [..] + The wakeup pins are internally connected to the EXTI lines [55-60] to + generate an interrupt if enabled. The EXTI lines configuration is done by + the HAL_EXTI_Dx_EventInputConfig() functions defined in the stm32h7xxhal.c + file. + [..] + When a wakeup pin event is received the HAL_PWREx_WAKEUP_PIN_IRQHandler is + called and the appropriate flag is set in the PWR_WKUPFR register. Then in + the HAL_PWREx_WAKEUP_PIN_IRQHandler function the wakeup pin flag will be + cleared and the appropriate user callback will be called. The user can add + his own code by customization of function pointer HAL_PWREx_WKUPx_Callback. + +@endverbatim + * @{ + */ + +#if defined (PWR_CPUCR_RETDS_CD) +/** + * @brief Enter the system to STOP mode with main domain in DSTOP2. + * @note In STOP mode, the domain bus matrix clock is stalled. + * @note In STOP mode, memories and registers are maintained and peripherals + * in CPU domain are no longer operational. + * @note All clocks in the VCORE domain are stopped, the PLL, the HSI and the + * HSE oscillators are disabled. Only Peripherals that have wakeup + * capability can switch on the HSI to receive a frame, and switch off + * the HSI after receiving the frame if it is not a wakeup frame. In + * this case the HSI clock is propagated only to the peripheral + * requesting it. + * @note When exiting STOP mode by issuing an interrupt or a wakeup event, + * the HSI RC oscillator is selected as system clock if STOPWUCK bit in + * RCC_CFGR register is set. + * @param Regulator : Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power + * regulator ON. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction. + * @retval None. + */ +void HAL_PWREx_EnterSTOP2Mode (uint32_t Regulator, uint8_t STOPEntry) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_STOP_ENTRY (STOPEntry)); + + /* Select the regulator state in Stop mode */ + MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator); + + /* Go to DStop2 mode (deep retention) when CPU domain enters Deepsleep */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_RETDS_CD); + + /* Keep DSTOP mode when SmartRun domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_SRD); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __ISB (); + __DSB (); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +} +#endif /* defined (PWR_CPUCR_RETDS_CD) */ + +/** + * @brief Enter a Domain to DSTOP mode. + * @note This API gives flexibility to manage independently each domain STOP + * mode. For dual core lines, this API should be executed with the + * corresponding Cortex-Mx to enter domain to DSTOP mode. When it is + * executed by all available Cortex-Mx, the system enter to STOP mode. + * For single core lines, calling this API with domain parameter set to + * PWR_D1_DOMAIN (D1/CD), the whole system will enter in STOP mode + * independently of PWR_CPUCR_PDDS_Dx bits values if RUN_D3 bit in the + * CPUCR_RUN_D3 is cleared. + * @note In DStop mode the domain bus matrix clock is stopped. + * @note The system D3/SRD domain enter Stop mode only when the CPU subsystem + * is in CStop mode, the EXTI wakeup sources are inactive and at least + * one PDDS_Dn bit in PWR CPU control register (PWR_CPUCR) for + * any domain request Stop. + * @note Before entering DSTOP mode it is recommended to call SCB_CleanDCache + * function in order to clean the D-Cache and guarantee the data + * integrity for the SRAM memories. + * @note In System Stop mode, the domain peripherals that use the LSI or LSE + * clock, and the peripherals that have a kernel clock request to + * select HSI or CSI as source, are still able to operate. + * @param Regulator : Specifies the regulator state in STOP mode. + * This parameter can be one of the following values: + * @arg PWR_MAINREGULATOR_ON : STOP mode with regulator ON. + * @arg PWR_LOWPOWERREGULATOR_ON : STOP mode with low power + * regulator ON. + * @param STOPEntry : Specifies if STOP mode in entered with WFI or WFE + * intrinsic instruction. + * This parameter can be one of the following values: + * @arg PWR_STOPENTRY_WFI : Enter STOP mode with WFI instruction. + * @arg PWR_STOPENTRY_WFE : Enter STOP mode with WFE instruction. + * @param Domain : Specifies the Domain to enter in DSTOP mode. + * This parameter can be one of the following values: + * @arg PWR_D1_DOMAIN : Enter D1/CD Domain to DSTOP mode. + * @arg PWR_D2_DOMAIN : Enter D2 Domain to DSTOP mode. + * @arg PWR_D3_DOMAIN : Enter D3/SRD Domain to DSTOP mode. + * @retval None. + */ +void HAL_PWREx_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry, uint32_t Domain) +{ + /* Check the parameters */ + assert_param (IS_PWR_REGULATOR (Regulator)); + assert_param (IS_PWR_STOP_ENTRY (STOPEntry)); + assert_param (IS_PWR_DOMAIN (Domain)); + + /* Select the regulator state in Stop mode */ + MODIFY_REG (PWR->CR1, PWR_CR1_LPDS, Regulator); + + /* Select the domain Power Down DeepSleep */ + if (Domain == PWR_D1_DOMAIN) + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM7_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering stop + mode will not be performed + */ + return; + } +#endif /* defined (DUAL_CORE) */ + + /* Keep DSTOP mode when D1/CD domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D1); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + } +#if defined (PWR_CPUCR_PDDS_D2) + else if (Domain == PWR_D2_DOMAIN) + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM4_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering stop + mode will not be performed + */ + return; + } + + /* Keep DSTOP mode when D2 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D2); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Ensure that all instructions are done before entering STOP mode */ + __DSB (); + __ISB (); + + /* Select Stop mode entry */ + if (STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI (); + } + else + { + /* Request Wait For Event */ + __WFE (); + } + + /* Clear SLEEPDEEP bit of Cortex-Mx in the System Control Register */ + CLEAR_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); +#else + /* Keep DSTOP mode when D2 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D2); +#endif /* defined (DUAL_CORE) */ + } +#endif /* defined (PWR_CPUCR_PDDS_D2) */ + else + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + /* Keep DSTOP mode when D3 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3); + } + else + { + /* Keep DSTOP mode when D3 domain enters Deepsleep */ + CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D3); + } +#else + /* Keep DSTOP mode when D3/SRD domain enters Deepsleep */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3); +#endif /* defined (DUAL_CORE) */ + } +} + +/** + * @brief Clear pending event. + * @note This API clears the pending event in order to enter a given CPU + * to CSLEEP or CSTOP. It should be called just before APIs performing + * enter low power mode using Wait For Event request. + * @note Cortex-M7 must be in CRUN mode when calling this API by Cortex-M4. + * @retval None. + */ +void HAL_PWREx_ClearPendingEvent (void) +{ +#if defined (DUAL_CORE) + /* Check the current Core */ + if (HAL_GetCurrentCPUID () == CM7_CPUID) + { + __WFE (); + } + else + { + __SEV (); + __WFE (); + } +#else + __WFE (); +#endif /* defined (DUAL_CORE) */ +} + +/** + * @brief Enter a Domain to DSTANDBY mode. + * @note This API gives flexibility to manage independently each domain + * STANDBY mode. For dual core lines, this API should be executed with + * the corresponding Cortex-Mx to enter domain to DSTANDBY mode. When + * it is executed by all available Cortex-Mx, the system enter STANDBY + * mode. + * For single core lines, calling this API with D1/SRD the selected + * domain will enter the whole system in STOP if PWR_CPUCR_PDDS_D3 = 0 + * and enter the whole system in STANDBY if PWR_CPUCR_PDDS_D3 = 1. + * @note The DStandby mode is entered when all PDDS_Dn bits in PWR_CPUCR for + * the Dn domain select Standby mode. When the system enters Standby + * mode, the voltage regulator is disabled. + * @note When D2 or D3 domain is in DStandby mode and the CPU sets the + * domain PDDS_Dn bit to select Stop mode, the domain remains in + * DStandby mode. The domain will only exit DStandby when the CPU + * allocates a peripheral in the domain. + * @note The system D3/SRD domain enters Standby mode only when the D1 and D2 + * domain are in DStandby. + * @note Before entering DSTANDBY mode it is recommended to call + * SCB_CleanDCache function in order to clean the D-Cache and guarantee + * the data integrity for the SRAM memories. + * @param Domain : Specifies the Domain to enter to STANDBY mode. + * This parameter can be one of the following values: + * @arg PWR_D1_DOMAIN: Enter D1/CD Domain to DSTANDBY mode. + * @arg PWR_D2_DOMAIN: Enter D2 Domain to DSTANDBY mode. + * @arg PWR_D3_DOMAIN: Enter D3/SRD Domain to DSTANDBY mode. + * @retval None + */ +void HAL_PWREx_EnterSTANDBYMode (uint32_t Domain) +{ + /* Check the parameters */ + assert_param (IS_PWR_DOMAIN (Domain)); + + /* Select the domain Power Down DeepSleep */ + if (Domain == PWR_D1_DOMAIN) + { +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM7_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering + standby mode will not be performed + */ + return; + } +#endif /* defined (DUAL_CORE) */ + + /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */ + SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D1); + +#if defined (DUAL_CORE) + /* Allow DSTANDBY mode when D1/CD domain enters Deepsleep */ + SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D1); +#endif /*DUAL_CORE*/ + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* This option is used to ensure that store operations are completed */ +#if defined (__CC_ARM) + __force_stores (); +#endif /* defined (__CC_ARM) */ + + /* Request Wait For Interrupt */ + __WFI (); + } +#if defined (PWR_CPUCR_PDDS_D2) + else if (Domain == PWR_D2_DOMAIN) + { + /* Allow DSTANDBY mode when D2 domain enters Deepsleep */ + SET_BIT (PWR-> CPUCR, PWR_CPUCR_PDDS_D2); + +#if defined (DUAL_CORE) + /* Check current core */ + if (HAL_GetCurrentCPUID () != CM4_CPUID) + { + /* + When the domain selected and the cortex-mx don't match, entering + standby mode will not be performed + */ + return; + } + + /* Allow DSTANDBY mode when D2 domain enters Deepsleep */ + SET_BIT (PWR-> CPU2CR, PWR_CPU2CR_PDDS_D2); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT (SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* This option is used to ensure that store operations are completed */ +#if defined (__CC_ARM) + __force_stores (); +#endif /* defined (__CC_ARM) */ + + /* Request Wait For Interrupt */ + __WFI (); +#endif /* defined (DUAL_CORE) */ + } +#endif /* defined (PWR_CPUCR_PDDS_D2) */ + else + { + /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_PDDS_D3); + +#if defined (DUAL_CORE) + /* Allow DSTANDBY mode when D3/SRD domain enters Deepsleep */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_PDDS_D3); +#endif /* defined (DUAL_CORE) */ + } +} + +/** + * @brief Configure the D3/SRD Domain state when the System in low power mode. + * @param D3State : Specifies the D3/SRD state. + * This parameter can be one of the following values : + * @arg PWR_D3_DOMAIN_STOP : D3/SRD domain will follow the most deep + * CPU sub-system low power mode. + * @arg PWR_D3_DOMAIN_RUN : D3/SRD domain will stay in RUN mode + * regardless of the CPU sub-system low + * power mode. + * @retval None + */ +void HAL_PWREx_ConfigD3Domain (uint32_t D3State) +{ + /* Check the parameter */ + assert_param (IS_D3_STATE (D3State)); + + /* Keep D3/SRD in run mode */ + MODIFY_REG (PWR->CPUCR, PWR_CPUCR_RUN_D3, D3State); +} + +#if defined (DUAL_CORE) +/** + * @brief Clear HOLD2F, HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2 flags for a + * given domain. + * @param DomainFlags : Specifies the Domain flags to be cleared. + * This parameter can be one of the following values: + * @arg PWR_D1_DOMAIN_FLAGS : Clear D1 Domain flags. + * @arg PWR_D2_DOMAIN_FLAGS : Clear D2 Domain flags. + * @arg PWR_ALL_DOMAIN_FLAGS : Clear D1 and D2 Domain flags. + * @retval None. + */ +void HAL_PWREx_ClearDomainFlags (uint32_t DomainFlags) +{ + /* Check the parameter */ + assert_param (IS_PWR_DOMAIN_FLAG (DomainFlags)); + + /* D1 CPU flags */ + if (DomainFlags == PWR_D1_DOMAIN_FLAGS) + { + /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF); + } + /* D2 CPU flags */ + else if (DomainFlags == PWR_D2_DOMAIN_FLAGS) + { + /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF); + } + else + { + /* Clear D1 domain flags (HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_CSSF); + /* Clear D2 domain flags (HOLD1F, STOPF, SBF, SBF_D1, and SBF_D2) */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_CSSF); + } +} + +/** + * @brief Hold the CPU and their domain peripherals when exiting STOP mode. + * @param CPU : Specifies the core to be held. + * This parameter can be one of the following values: + * @arg PWR_CORE_CPU1: Hold CPU1 and set CPU2 as master. + * @arg PWR_CORE_CPU2: Hold CPU2 and set CPU1 as master. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_HoldCore (uint32_t CPU) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param (IS_PWR_CORE (CPU)); + + /* Check CPU index */ + if (CPU == PWR_CORE_CPU2) + { + /* If CPU1 is not held */ + if ((PWR->CPU2CR & PWR_CPU2CR_HOLD1) != PWR_CPU2CR_HOLD1) + { + /* Set HOLD2 bit */ + SET_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2); + } + else + { + status = HAL_ERROR; + } + } + else + { + /* If CPU2 is not held */ + if ((PWR->CPUCR & PWR_CPUCR_HOLD2) != PWR_CPUCR_HOLD2) + { + /* Set HOLD1 bit */ + SET_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1); + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Release the CPU and their domain peripherals after a wake-up from + * STOP mode. + * @param CPU: Specifies the core to be released. + * This parameter can be one of the following values: + * @arg PWR_CORE_CPU1: Release the CPU1 and their domain + * peripherals from holding. + * @arg PWR_CORE_CPU2: Release the CPU2 and their domain + * peripherals from holding. + * @retval None + */ +void HAL_PWREx_ReleaseCore (uint32_t CPU) +{ + /* Check the parameters */ + assert_param (IS_PWR_CORE (CPU)); + + /* Check CPU index */ + if (CPU == PWR_CORE_CPU2) + { + /* Reset HOLD2 bit */ + CLEAR_BIT (PWR->CPUCR, PWR_CPUCR_HOLD2); + } + else + { + /* Reset HOLD1 bit */ + CLEAR_BIT (PWR->CPU2CR, PWR_CPU2CR_HOLD1); + } +} +#endif /* defined (DUAL_CORE) */ + + +/** + * @brief Enable the Flash Power Down in Stop mode. + * @note When Flash Power Down is enabled the Flash memory enters low-power + * mode when D1/SRD domain is in DStop mode. This feature allows to + * obtain the best trade-off between low-power consumption and restart + * time when exiting from DStop mode. + * @retval None. + */ +void HAL_PWREx_EnableFlashPowerDown (void) +{ + /* Enable the Flash Power Down */ + SET_BIT (PWR->CR1, PWR_CR1_FLPS); +} + +/** + * @brief Disable the Flash Power Down in Stop mode. + * @note When Flash Power Down is disabled the Flash memory is kept on + * normal mode when D1/SRD domain is in DStop mode. This feature allows + * to obtain the best trade-off between low-power consumption and + * restart time when exiting from DStop mode. + * @retval None. + */ +void HAL_PWREx_DisableFlashPowerDown (void) +{ + /* Disable the Flash Power Down */ + CLEAR_BIT (PWR->CR1, PWR_CR1_FLPS); +} + +#if defined (PWR_CR1_SRDRAMSO) +/** + * @brief Enable memory block shut-off in DStop or DStop2 modes + * @note In DStop or DStop2 mode, the content of the memory blocks is + * maintained. Further power optimization can be obtained by switching + * off some memory blocks. This optimization implies loss of the memory + * content. The user can select which memory is discarded during STOP + * mode by means of xxSO bits. + * @param MemoryBlock : Specifies the memory block to shut-off during DStop or + * DStop2 mode. + * This parameter can be one of the following values: + * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory. + * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and + * FDCAN memories. + * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories. + * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories. + * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory. + * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory. + * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory. + * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory. + * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory. + * @retval None. + */ +void HAL_PWREx_EnableMemoryShutOff (uint32_t MemoryBlock) +{ + /* Check the parameter */ + assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock)); + + /* Enable memory block shut-off */ + SET_BIT (PWR->CR1, MemoryBlock); +} + +/** + * @brief Disable memory block shut-off in DStop or DStop2 modes + * @param MemoryBlock : Specifies the memory block to keep content during + * DStop or DStop2 mode. + * This parameter can be one of the following values: + * @arg PWR_SRD_AHB_MEMORY_BLOCK : SmartRun domain AHB memory. + * @arg PWR_USB_FDCAN_MEMORY_BLOCK : High-speed interfaces USB and + * FDCAN memories. + * @arg PWR_GFXMMU_JPEG_MEMORY_BLOCK : GFXMMU and JPEG memories. + * @arg PWR_TCM_ECM_MEMORY_BLOCK : Instruction TCM and ETM memories. + * @arg PWR_RAM1_AHB_MEMORY_BLOCK : AHB RAM1 memory. + * @arg PWR_RAM2_AHB_MEMORY_BLOCK : AHB RAM2 memory. + * @arg PWR_RAM1_AXI_MEMORY_BLOCK : AXI RAM1 memory. + * @arg PWR_RAM2_AXI_MEMORY_BLOCK : AXI RAM2 memory. + * @arg PWR_RAM3_AXI_MEMORY_BLOCK : AXI RAM3 memory. + * @retval None. + */ +void HAL_PWREx_DisableMemoryShutOff (uint32_t MemoryBlock) +{ + /* Check the parameter */ + assert_param (IS_PWR_MEMORY_BLOCK (MemoryBlock)); + + /* Disable memory block shut-off */ + CLEAR_BIT (PWR->CR1, MemoryBlock); +} +#endif /* defined (PWR_CR1_SRDRAMSO) */ + +/** + * @brief Enable the Wake-up PINx functionality. + * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that + * contains the configuration information for the wake-up + * Pin. + * @note For dual core devices, please ensure to configure the EXTI lines for + * the different Cortex-Mx. All combination are allowed: wake up only + * Cortex-M7, wake up only Cortex-M4 and wake up Cortex-M7 and + * Cortex-M4. + * @retval None. + */ +void HAL_PWREx_EnableWakeUpPin (PWREx_WakeupPinTypeDef *sPinParams) +{ + uint32_t pinConfig; + uint32_t regMask; + const uint32_t pullMask = PWR_WKUPEPR_WKUPPUPD1; + + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_PIN (sPinParams->WakeUpPin)); + assert_param (IS_PWR_WAKEUP_PIN_POLARITY (sPinParams->PinPolarity)); + assert_param (IS_PWR_WAKEUP_PIN_PULL (sPinParams->PinPull)); + + pinConfig = sPinParams->WakeUpPin | \ + (sPinParams->PinPolarity << ((POSITION_VAL(sPinParams->WakeUpPin) + PWR_WKUPEPR_WKUPP1_Pos) & 0x1FU)) | \ + (sPinParams->PinPull << (((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) + PWR_WKUPEPR_WKUPPUPD1_Pos) & 0x1FU)); + + regMask = sPinParams->WakeUpPin | \ + (PWR_WKUPEPR_WKUPP1 << (POSITION_VAL(sPinParams->WakeUpPin) & 0x1FU)) | \ + (pullMask << ((POSITION_VAL(sPinParams->WakeUpPin) * PWR_WAKEUP_PINS_PULL_SHIFT_OFFSET) & 0x1FU)); + + /* Enable and Specify the Wake-Up pin polarity and the pull configuration + for the event detection (rising or falling edge) */ + MODIFY_REG (PWR->WKUPEPR, regMask, pinConfig); +#ifndef DUAL_CORE + /* Configure the Wakeup Pin EXTI Line */ + MODIFY_REG (EXTI->IMR2, PWR_EXTI_WAKEUP_PINS_MASK, (sPinParams->WakeUpPin << EXTI_IMR2_IM55_Pos)); +#endif /* !DUAL_CORE */ +} + +/** + * @brief Disable the Wake-up PINx functionality. + * @param WakeUpPin : Specifies the Wake-Up pin to be disabled. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_PIN1 : Disable PA0 wake-up PIN. + * @arg PWR_WAKEUP_PIN2 : Disable PA2 wake-up PIN. + * @arg PWR_WAKEUP_PIN3 : Disable PI8 wake-up PIN. + * @arg PWR_WAKEUP_PIN4 : Disable PC13 wake-up PIN. + * @arg PWR_WAKEUP_PIN5 : Disable PI11 wake-up PIN. + * @arg PWR_WAKEUP_PIN6 : Disable PC1 wake-up PIN. + * @note The PWR_WAKEUP_PIN3 and PWR_WAKEUP_PIN5 are available only for + * devices that support GPIOI port. + * @retval None + */ +void HAL_PWREx_DisableWakeUpPin (uint32_t WakeUpPin) +{ + /* Check the parameter */ + assert_param (IS_PWR_WAKEUP_PIN (WakeUpPin)); + + /* Disable the WakeUpPin */ + CLEAR_BIT (PWR->WKUPEPR, WakeUpPin); +} + +/** + * @brief Get the Wake-Up Pin pending flags. + * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_FLAG1 : Get wakeup event received from PA0. + * @arg PWR_WAKEUP_FLAG2 : Get wakeup event received from PA2. + * @arg PWR_WAKEUP_FLAG3 : Get wakeup event received from PI8. + * @arg PWR_WAKEUP_FLAG4 : Get wakeup event received from PC13. + * @arg PWR_WAKEUP_FLAG5 : Get wakeup event received from PI11. + * @arg PWR_WAKEUP_FLAG6 : Get wakeup event received from PC1. + * @arg PWR_WAKEUP_FLAG_ALL : Get Wakeup event received from all + * wake up pins. + * @note The PWR_WAKEUP_FLAG3 and PWR_WAKEUP_FLAG5 are available only for + * devices that support GPIOI port. + * @retval The Wake-Up pin flag. + */ +uint32_t HAL_PWREx_GetWakeupFlag (uint32_t WakeUpFlag) +{ + /* Check the parameters */ + assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag)); + + /* Return the wake up pin flag */ + return (PWR->WKUPFR & WakeUpFlag); +} + +/** + * @brief Clear the Wake-Up pin pending flag. + * @param WakeUpFlag: Specifies the Wake-Up PIN flag to clear. + * This parameter can be one of the following values: + * @arg PWR_WAKEUP_FLAG1 : Clear the wakeup event received from PA0. + * @arg PWR_WAKEUP_FLAG2 : Clear the wakeup event received from PA2. + * @arg PWR_WAKEUP_FLAG3 : Clear the wakeup event received from PI8. + * @arg PWR_WAKEUP_FLAG4 : Clear the wakeup event received from PC13. + * @arg PWR_WAKEUP_FLAG5 : Clear the wakeup event received from PI11. + * @arg PWR_WAKEUP_FLAG6 : Clear the wakeup event received from PC1. + * @arg PWR_WAKEUP_FLAG_ALL : Clear the wakeup events received from + * all wake up pins. + * @note The PWR_WAKEUP_FLAG3 and PWR_WAKEUP_FLAG5 are available only for + * devices that support GPIOI port. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag (uint32_t WakeUpFlag) +{ + /* Check the parameter */ + assert_param (IS_PWR_WAKEUP_FLAG (WakeUpFlag)); + + /* Clear the wake up event received from wake up pin x */ + SET_BIT (PWR->WKUPCR, WakeUpFlag); + + /* Check if the wake up event is well cleared */ + if ((PWR->WKUPFR & WakeUpFlag) != 0U) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief This function handles the PWR WAKEUP PIN interrupt request. + * @note This API should be called under the WAKEUP_PIN_IRQHandler(). + * @retval None. + */ +void HAL_PWREx_WAKEUP_PIN_IRQHandler (void) +{ + /* Wakeup pin EXTI line interrupt detected */ + if (READ_BIT(PWR->WKUPFR, PWR_WKUPFR_WKUPF1) != 0U) + { + /* Clear PWR WKUPF1 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP1); + + /* PWR WKUP1 interrupt user callback */ + HAL_PWREx_WKUP1_Callback (); + } + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF2) != 0U) + { + /* Clear PWR WKUPF2 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP2); + + /* PWR WKUP2 interrupt user callback */ + HAL_PWREx_WKUP2_Callback (); + } +#if defined (PWR_WKUPFR_WKUPF3) + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF3) != 0U) + { + /* Clear PWR WKUPF3 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP3); + + /* PWR WKUP3 interrupt user callback */ + HAL_PWREx_WKUP3_Callback (); + } +#endif /* defined (PWR_WKUPFR_WKUPF3) */ + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF4) != 0U) + { + /* Clear PWR WKUPF4 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP4); + + /* PWR WKUP4 interrupt user callback */ + HAL_PWREx_WKUP4_Callback (); + } +#if defined (PWR_WKUPFR_WKUPF5) + else if (READ_BIT (PWR->WKUPFR, PWR_WKUPFR_WKUPF5) != 0U) + { + /* Clear PWR WKUPF5 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP5); + + /* PWR WKUP5 interrupt user callback */ + HAL_PWREx_WKUP5_Callback (); + } +#endif /* defined (PWR_WKUPFR_WKUPF5) */ + else + { + /* Clear PWR WKUPF6 flag */ + __HAL_PWR_CLEAR_WAKEUPFLAG (PWR_FLAG_WKUP6); + + /* PWR WKUP6 interrupt user callback */ + HAL_PWREx_WKUP6_Callback (); + } +} + +/** + * @brief PWR WKUP1 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP1_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP1Callback can be implemented in the user file + */ +} + +/** + * @brief PWR WKUP2 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP2_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP2Callback can be implemented in the user file + */ +} + +#if defined (PWR_WKUPFR_WKUPF3) +/** + * @brief PWR WKUP3 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP3_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP3Callback can be implemented in the user file + */ +} +#endif /* defined (PWR_WKUPFR_WKUPF3) */ + +/** + * @brief PWR WKUP4 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP4_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP4Callback can be implemented in the user file + */ +} + +#if defined (PWR_WKUPFR_WKUPF5) +/** + * @brief PWR WKUP5 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP5_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP5Callback can be implemented in the user file + */ +} +#endif /* defined (PWR_WKUPFR_WKUPF5) */ + +/** + * @brief PWR WKUP6 interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_WKUP6_Callback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWREx_WKUP6Callback can be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group3 Peripherals control functions + * @brief Peripherals control functions + * +@verbatim + =============================================================================== + ##### Peripherals control functions ##### + =============================================================================== + + *** Main and Backup Regulators configuration *** + ================================================ + [..] + (+) The backup domain includes 4 Kbytes of backup SRAM accessible only + from the CPU, and addressed in 32-bit, 16-bit or 8-bit mode. Its + content is retained even in Standby or VBAT mode when the low power + backup regulator is enabled. It can be considered as an internal + EEPROM when VBAT is always present. You can use the + HAL_PWREx_EnableBkUpReg() function to enable the low power backup + regulator. + (+) When the backup domain is supplied by VDD (analog switch connected to + VDD) the backup SRAM is powered from VDD which replaces the VBAT power + supply to save battery life. + (+) The backup SRAM is not mass erased by a tamper event. It is read + protected to prevent confidential data, such as cryptographic private + key, from being accessed. The backup SRAM can be erased only through + the Flash interface when a protection level change from level 1 to + level 0 is requested. + -@- Refer to the description of Read protection (RDP) in the Flash + programming manual. + (+) The main internal regulator can be configured to have a tradeoff + between performance and power consumption when the device does not + operate at the maximum frequency. This is done through + HAL_PWREx_ControlVoltageScaling(VOS) function which configure the VOS + bit in PWR_D3CR register. + (+) The main internal regulator can be configured to operate in Low Power + mode when the system enters STOP mode to further reduce power + consumption. + This is done through HAL_PWREx_ControlStopModeVoltageScaling(SVOS) + function which configure the SVOS bit in PWR_CR1 register. + The selected SVOS4 and SVOS5 levels add an additional startup delay + when exiting from system Stop mode. + -@- Refer to the product datasheets for more details. + + *** USB Regulator configuration *** + =================================== + [..] + (+) The USB transceivers are supplied from a dedicated VDD33USB supply + that can be provided either by the integrated USB regulator, or by an + external USB supply. + (+) The USB regulator is enabled by HAL_PWREx_EnableUSBReg() function, the + VDD33USB is then provided from the USB regulator. + (+) When the USB regulator is enabled, the VDD33USB supply level detector + shall be enabled through HAL_PWREx_EnableUSBVoltageDetector() + function. + (+) The USB regulator is disabled through HAL_PWREx_DisableUSBReg() + function and VDD33USB can be provided from an external supply. In this + case VDD33USB and VDD50USB shall be connected together. + + *** VBAT battery charging *** + ============================= + [..] + (+) When VDD is present, the external battery connected to VBAT can be + charged through an internal resistance. VBAT charging can be performed + either through a 5 KOhm resistor or through a 1.5 KOhm resistor. + (+) VBAT charging is enabled by HAL_PWREx_EnableBatteryCharging + (ResistorValue) function with: + (++) ResistorValue: + (+++) PWR_BATTERY_CHARGING_RESISTOR_5: 5 KOhm resistor. + (+++) PWR_BATTERY_CHARGING_RESISTOR_1_5: 1.5 KOhm resistor. + (+) VBAT charging is disabled by HAL_PWREx_DisableBatteryCharging() + function. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Backup Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg (void) +{ + uint32_t tickstart; + + /* Enable the Backup regulator */ + SET_BIT (PWR->CR2, PWR_CR2_BREN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till Backup regulator ready flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) == 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the Backup Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg (void) +{ + uint32_t tickstart; + + /* Disable the Backup regulator */ + CLEAR_BIT (PWR->CR2, PWR_CR2_BREN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till Backup regulator ready flag is reset */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_BRR) != 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Enable the USB Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_EnableUSBReg (void) +{ + uint32_t tickstart; + + /* Enable the USB regulator */ + SET_BIT (PWR->CR3, PWR_CR3_USBREGEN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till the USB regulator ready flag is set */ + while (__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) == 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Disable the USB Regulator. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_PWREx_DisableUSBReg (void) +{ + uint32_t tickstart; + + /* Disable the USB regulator */ + CLEAR_BIT (PWR->CR3, PWR_CR3_USBREGEN); + + /* Get tick */ + tickstart = HAL_GetTick (); + + /* Wait till the USB regulator ready flag is reset */ + while(__HAL_PWR_GET_FLAG (PWR_FLAG_USB33RDY) != 0U) + { + if ((HAL_GetTick() - tickstart ) > PWR_FLAG_SETTING_DELAY) + { + return HAL_ERROR; + } + } + + return HAL_OK; +} + +/** + * @brief Enable the USB voltage level detector. + * @retval None. + */ +void HAL_PWREx_EnableUSBVoltageDetector (void) +{ + /* Enable the USB voltage detector */ + SET_BIT (PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Disable the USB voltage level detector. + * @retval None. + */ +void HAL_PWREx_DisableUSBVoltageDetector (void) +{ + /* Disable the USB voltage detector */ + CLEAR_BIT (PWR->CR3, PWR_CR3_USB33DEN); +} + +/** + * @brief Enable the Battery charging. + * @note When VDD is present, charge the external battery through an internal + * resistor. + * @param ResistorValue : Specifies the charging resistor. + * This parameter can be one of the following values : + * @arg PWR_BATTERY_CHARGING_RESISTOR_5 : 5 KOhm resistor. + * @arg PWR_BATTERY_CHARGING_RESISTOR_1_5 : 1.5 KOhm resistor. + * @retval None. + */ +void HAL_PWREx_EnableBatteryCharging (uint32_t ResistorValue) +{ + /* Check the parameter */ + assert_param (IS_PWR_BATTERY_RESISTOR_SELECT (ResistorValue)); + + /* Specify the charging resistor */ + MODIFY_REG (PWR->CR3, PWR_CR3_VBRS, ResistorValue); + + /* Enable the Battery charging */ + SET_BIT (PWR->CR3, PWR_CR3_VBE); +} + +/** + * @brief Disable the Battery charging. + * @retval None. + */ +void HAL_PWREx_DisableBatteryCharging (void) +{ + /* Disable the Battery charging */ + CLEAR_BIT (PWR->CR3, PWR_CR3_VBE); +} + +#if defined (PWR_CR1_BOOSTE) +/** + * @brief Enable the booster to guarantee the analog switch AC performance when + * the VDD supply voltage is below 2V7. + * @note The VDD supply voltage can be monitored through the PVD and the PLS + * field bits. + * @retval None. + */ +void HAL_PWREx_EnableAnalogBooster (void) +{ + /* Enable the Analog voltage */ + SET_BIT (PWR->CR1, PWR_CR1_AVD_READY); + + /* Enable VDDA booster */ + SET_BIT (PWR->CR1, PWR_CR1_BOOSTE); +} + +/** + * @brief Disable the analog booster. + * @retval None. + */ +void HAL_PWREx_DisableAnalogBooster (void) +{ + /* Disable VDDA booster */ + CLEAR_BIT (PWR->CR1, PWR_CR1_BOOSTE); + + /* Disable the Analog voltage */ + CLEAR_BIT (PWR->CR1, PWR_CR1_AVD_READY); +} +#endif /* defined (PWR_CR1_BOOSTE) */ +/** + * @} + */ + +/** @defgroup PWREx_Exported_Functions_Group4 Power Monitoring functions + * @brief Power Monitoring functions + * +@verbatim + =============================================================================== + ##### Power Monitoring functions ##### + =============================================================================== + + *** VBAT and Temperature supervision *** + ======================================== + [..] + (+) The VBAT battery voltage supply can be monitored by comparing it with + two threshold levels: VBAThigh and VBATlow. VBATH flag and VBATL flags + in the PWR control register 2 (PWR_CR2), indicate if VBAT is higher or + lower than the threshold. + (+) The temperature can be monitored by comparing it with two threshold + levels, TEMPhigh and TEMPlow. TEMPH and TEMPL flags, in the PWR + control register 2 (PWR_CR2), indicate whether the device temperature + is higher or lower than the threshold. + (+) The VBAT and the temperature monitoring is enabled by + HAL_PWREx_EnableMonitoring() function and disabled by + HAL_PWREx_DisableMonitoring() function. + (+) The HAL_PWREx_GetVBATLevel() function returns the VBAT level which can + be : PWR_VBAT_BELOW_LOW_THRESHOLD or PWR_VBAT_ABOVE_HIGH_THRESHOLD or + PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD. + (+) The HAL_PWREx_GetTemperatureLevel() function returns the Temperature + level which can be : + PWR_TEMP_BELOW_LOW_THRESHOLD or PWR_TEMP_ABOVE_HIGH_THRESHOLD or + PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD. + + *** AVD configuration *** + ========================= + [..] + (+) The AVD is used to monitor the VDDA power supply by comparing it to a + threshold selected by the AVD Level (ALS[3:0] bits in the PWR_CR1 + register). + (+) A AVDO flag is available to indicate if VDDA is higher or lower + than the AVD threshold. This event is internally connected to the EXTI + line 16 to generate an interrupt if enabled. + It is configurable through __HAL_PWR_AVD_EXTI_ENABLE_IT() macro. + (+) The AVD is stopped in System Standby mode. + +@endverbatim + * @{ + */ + +/** + * @brief Enable the VBAT and temperature monitoring. + * @retval HAL status. + */ +void HAL_PWREx_EnableMonitoring (void) +{ + /* Enable the VBAT and Temperature monitoring */ + SET_BIT (PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Disable the VBAT and temperature monitoring. + * @retval HAL status. + */ +void HAL_PWREx_DisableMonitoring (void) +{ + /* Disable the VBAT and Temperature monitoring */ + CLEAR_BIT (PWR->CR2, PWR_CR2_MONEN); +} + +/** + * @brief Indicate whether the junction temperature is between, above or below + * the thresholds. + * @retval Temperature level. + */ +uint32_t HAL_PWREx_GetTemperatureLevel (void) +{ + uint32_t tempLevel, regValue; + + /* Read the temperature flags */ + regValue = READ_BIT (PWR->CR2, (PWR_CR2_TEMPH | PWR_CR2_TEMPL)); + + /* Check if the temperature is below the threshold */ + if (regValue == PWR_CR2_TEMPL) + { + tempLevel = PWR_TEMP_BELOW_LOW_THRESHOLD; + } + /* Check if the temperature is above the threshold */ + else if (regValue == PWR_CR2_TEMPH) + { + tempLevel = PWR_TEMP_ABOVE_HIGH_THRESHOLD; + } + /* The temperature is between the thresholds */ + else + { + tempLevel = PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD; + } + + return tempLevel; +} + +/** + * @brief Indicate whether the Battery voltage level is between, above or below + * the thresholds. + * @retval VBAT level. + */ +uint32_t HAL_PWREx_GetVBATLevel (void) +{ + uint32_t VBATLevel, regValue; + + /* Read the VBAT flags */ + regValue = READ_BIT (PWR->CR2, (PWR_CR2_VBATH | PWR_CR2_VBATL)); + + /* Check if the VBAT is below the threshold */ + if (regValue == PWR_CR2_VBATL) + { + VBATLevel = PWR_VBAT_BELOW_LOW_THRESHOLD; + } + /* Check if the VBAT is above the threshold */ + else if (regValue == PWR_CR2_VBATH) + { + VBATLevel = PWR_VBAT_ABOVE_HIGH_THRESHOLD; + } + /* The VBAT is between the thresholds */ + else + { + VBATLevel = PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD; + } + + return VBATLevel; +} + +#if defined (PWR_CSR1_MMCVDO) +/** + * @brief Get the VDDMMC voltage level. + * @retval The VDDMMC voltage level. + */ +PWREx_MMC_VoltageLevel HAL_PWREx_GetMMCVoltage (void) +{ + PWREx_MMC_VoltageLevel mmc_voltage; + + /* Check voltage detector output on VDDMMC value */ + if ((PWR->CSR1 & PWR_CSR1_MMCVDO_Msk) == 0U) + { + mmc_voltage = PWR_MMC_VOLTAGE_BELOW_1V2; + } + else + { + mmc_voltage = PWR_MMC_VOLTAGE_EQUAL_ABOVE_1V2; + } + + return mmc_voltage; +} +#endif /* defined (PWR_CSR1_MMCVDO) */ + +/** + * @brief Configure the event mode and the voltage threshold detected by the + * Analog Voltage Detector (AVD). + * @param sConfigAVD : Pointer to an PWREx_AVDTypeDef structure that contains + * the configuration information for the AVD. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage threshold corresponding to each + * detection level. + * @note For dual core devices, please ensure to configure the EXTI lines for + * the different Cortex-Mx through PWR_Exported_Macro provided by this + * driver. All combination are allowed: wake up only Cortex-M7, wake up + * only Cortex-M4 and wake up Cortex-M7 and Cortex-M4. + * @retval None. + */ +void HAL_PWREx_ConfigAVD (PWREx_AVDTypeDef *sConfigAVD) +{ + /* Check the parameters */ + assert_param (IS_PWR_AVD_LEVEL (sConfigAVD->AVDLevel)); + assert_param (IS_PWR_AVD_MODE (sConfigAVD->Mode)); + + /* Set the ALS[18:17] bits according to AVDLevel value */ + MODIFY_REG (PWR->CR1, PWR_CR1_ALS, sConfigAVD->AVDLevel); + + /* Clear any previous config */ +#if !defined (DUAL_CORE) + __HAL_PWR_AVD_EXTI_DISABLE_EVENT (); + __HAL_PWR_AVD_EXTI_DISABLE_IT (); +#endif /* !defined (DUAL_CORE) */ + + __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE (); + __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE (); + +#if !defined (DUAL_CORE) + /* Configure the interrupt mode */ + if ((sConfigAVD->Mode & AVD_MODE_IT) == AVD_MODE_IT) + { + __HAL_PWR_AVD_EXTI_ENABLE_IT (); + } + + /* Configure the event mode */ + if ((sConfigAVD->Mode & AVD_MODE_EVT) == AVD_MODE_EVT) + { + __HAL_PWR_AVD_EXTI_ENABLE_EVENT (); + } +#endif /* !defined (DUAL_CORE) */ + + /* Rising edge configuration */ + if ((sConfigAVD->Mode & AVD_RISING_EDGE) == AVD_RISING_EDGE) + { + __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE (); + } + + /* Falling edge configuration */ + if ((sConfigAVD->Mode & AVD_FALLING_EDGE) == AVD_FALLING_EDGE) + { + __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE (); + } +} + +/** + * @brief Enable the Analog Voltage Detector (AVD). + * @retval None. + */ +void HAL_PWREx_EnableAVD (void) +{ + /* Enable the Analog Voltage Detector */ + SET_BIT (PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief Disable the Analog Voltage Detector(AVD). + * @retval None. + */ +void HAL_PWREx_DisableAVD (void) +{ + /* Disable the Analog Voltage Detector */ + CLEAR_BIT (PWR->CR1, PWR_CR1_AVDEN); +} + +/** + * @brief This function handles the PWR PVD/AVD interrupt request. + * @note This API should be called under the PVD_AVD_IRQHandler(). + * @retval None + */ +void HAL_PWREx_PVD_AVD_IRQHandler (void) +{ + /* Check if the Programmable Voltage Detector is enabled (PVD) */ + if (READ_BIT (PWR->CR1, PWR_CR1_PVDEN) != 0U) + { +#if defined (DUAL_CORE) + if (HAL_GetCurrentCPUID () == CM7_CPUID) +#endif /* defined (DUAL_CORE) */ + { + /* Check PWR D1/CD EXTI flag */ + if (__HAL_PWR_PVD_EXTI_GET_FLAG () != 0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + + /* Clear PWR EXTI D1/CD pending bit */ + __HAL_PWR_PVD_EXTI_CLEAR_FLAG (); + } + } +#if defined (DUAL_CORE) + else + { + /* Check PWR EXTI D2 flag */ + if (__HAL_PWR_PVD_EXTID2_GET_FLAG () != 0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback (); + + /* Clear PWR EXTI D2 pending bit */ + __HAL_PWR_PVD_EXTID2_CLEAR_FLAG(); + } + } +#endif /* defined (DUAL_CORE) */ + } + + /* Check if the Analog Voltage Detector is enabled (AVD) */ + if (READ_BIT (PWR->CR1, PWR_CR1_AVDEN) != 0U) + { +#if defined (DUAL_CORE) + if (HAL_GetCurrentCPUID () == CM7_CPUID) +#endif /* defined (DUAL_CORE) */ + { + /* Check PWR EXTI D1/CD flag */ + if (__HAL_PWR_AVD_EXTI_GET_FLAG () != 0U) + { + /* PWR AVD interrupt user callback */ + HAL_PWREx_AVDCallback (); + + /* Clear PWR EXTI D1/CD pending bit */ + __HAL_PWR_AVD_EXTI_CLEAR_FLAG (); + } + } +#if defined (DUAL_CORE) + else + { + /* Check PWR EXTI D2 flag */ + if (__HAL_PWR_AVD_EXTID2_GET_FLAG () != 0U) + { + /* PWR AVD interrupt user callback */ + HAL_PWREx_AVDCallback (); + + /* Clear PWR EXTI D2 pending bit */ + __HAL_PWR_AVD_EXTID2_CLEAR_FLAG (); + } + } +#endif /* defined (DUAL_CORE) */ + } +} + +/** + * @brief PWR AVD interrupt callback. + * @retval None. + */ +__weak void HAL_PWREx_AVDCallback (void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWR_AVDCallback can be implemented in the user file + */ +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c new file mode 100644 index 0000000..8c987ac --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c @@ -0,0 +1,1814 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from Internal High Speed oscillator + (HSI 64MHz) with Flash 0 wait state,and all peripherals are off except + internal SRAM, Flash, JTAG and PWR + (+) There is no pre-scaler on High speed (AHB) and Low speed (APB) buses; + all peripherals mapped on these buses are running at HSI speed. + (+) The clock for all peripherals is switched off, except the SRAM and FLASH. + (+) All GPIOs are in analogue mode , except the JTAG pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Configure the AHB and APB buses pre-scalers + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock kernel source(s) for peripherals which clocks are not + derived from the System clock through :RCC_D1CCIPR,RCC_D2CCIP1R,RCC_D2CCIP2R + and RCC_D3CCIPR registers + + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle + after the clock enable bit is set on the hardware register + (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle + after the clock enable bit is set on the hardware register + + [..] + Implemented Workaround: + (+) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. + + @endverbatim + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ +#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_8 + +#define MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() +#define MCO2_GPIO_PORT GPIOC +#define MCO2_PIN GPIO_PIN_9 + +/** + * @} + */ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal/external oscillators + (HSE, HSI, LSE,CSI, LSI,HSI48, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB3, AHB1 + AHB2,AHB4,APB3, APB1L, APB1H, APB2, and APB4). + + [..] Internal/external clock and PLL configuration + (#) HSI (high-speed internal), 64 MHz factory-trimmed RC used directly or through + the PLL as System clock source. + (#) CSI is a low-power RC oscillator which can be used directly as system clock, peripheral + clock, or PLL input.But even with frequency calibration, is less accurate than an + external crystal oscillator or ceramic resonator. + (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC + clock source. + + (#) HSE (high-speed external), 4 to 48 MHz crystal oscillator used directly or + through the PLL as System clock source. Can be used also as RTC clock source. + + (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. + + (#) PLL , The RCC features three independent PLLs (clocked by HSI , HSE or CSI), + featuring three different output clocks and able to work either in integer or Fractional mode. + (++) A main PLL, PLL1, which is generally used to provide clocks to the CPU + and to some peripherals. + (++) Two dedicated PLLs, PLL2 and PLL3, which are used to generate the kernel clock for peripherals. + + + (#) CSS (Clock security system), once enabled and if a HSE clock failure occurs + (HSE used directly or through PLL as System clock source), the System clock + is automatically switched to HSI and an interrupt is generated if enabled. + The interrupt is linked to the Cortex-M NMI (Non-Mask-able Interrupt) + exception vector. + + (#) MCO1 (micro controller clock output), used to output HSI, LSE, HSE, PLL1(PLL1_Q) + or HSI48 clock (through a configurable pre-scaler) on PA8 pin. + + (#) MCO2 (micro controller clock output), used to output HSE, PLL2(PLL2_P), SYSCLK, + LSI, CSI, or PLL1(PLL1_P) clock (through a configurable pre-scaler) on PC9 pin. + + [..] System, AHB and APB buses clocks configuration + (#) Several clock sources can be used to drive the System clock (SYSCLK): CSI,HSI, + HSE and PLL. + The AHB clock (HCLK) is derived from System core clock through configurable + pre-scaler and used to clock the CPU, memory and peripherals mapped + on AHB and APB bus of the 3 Domains (D1, D2, D3)* through configurable pre-scalers + and used to clock the peripherals mapped on these buses. You can use + "HAL_RCC_GetSysClockFreq()" function to retrieve system clock frequency. + + -@- All the peripheral clocks are derived from the System clock (SYSCLK) except those + with dual clock domain where kernel source clock could be selected through + RCC_D1CCIPR,RCC_D2CCIP1R,RCC_D2CCIP2R and RCC_D3CCIPR registers. + + (*) : 2 Domains (CD and SRD) for stm32h7a3xx and stm32h7b3xx family lines. +@endverbatim + * @{ + */ + +/** + * @brief Resets the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE, PLL1, PLL2 and PLL3 OFF + * - AHB, APB Bus pre-scaler set to 1. + * - CSS, MCO1 and MCO2 OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE and RTC clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + + /* Increasing the CPU frequency */ + if (FLASH_LATENCY_DEFAULT > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_DEFAULT); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLASH_LATENCY_DEFAULT) + { + return HAL_ERROR; + } + + } + + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Set HSION bit */ + SET_BIT(RCC->CR, RCC_CR_HSION); + + /* Wait till HSI is ready */ + while (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set HSITRIM[6:0] bits to the reset value */ + SET_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM_6); + + /* Reset CFGR register */ + CLEAR_REG(RCC->CFGR); + + /* Update the SystemCoreClock and SystemD2Clock global variables */ + SystemCoreClock = HSI_VALUE; + SystemD2Clock = HSI_VALUE; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(uwTickPrio) != HAL_OK) + { + return HAL_ERROR; + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Wait till clock switch is ready */ + while (READ_BIT(RCC->CFGR, RCC_CFGR_SWS) != 0U) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset CSION, CSIKERON, HSEON, HSI48ON, HSECSSON, HSIDIV bits */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_HSIKERON | RCC_CR_HSIDIV | RCC_CR_HSIDIVF | RCC_CR_CSION | RCC_CR_CSIKERON \ + | RCC_CR_HSI48ON | RCC_CR_CSSHSEON); + + /* Wait till HSE is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Clear PLLON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL1ON); + + /* Wait till PLL is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL1RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLL2ON bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL2ON); + + /* Wait till PLL2 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL2RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick */ + tickstart = HAL_GetTick(); + + /* Reset PLL3 bit */ + CLEAR_BIT(RCC->CR, RCC_CR_PLL3ON); + + /* Wait till PLL3 is disabled */ + while (READ_BIT(RCC->CR, RCC_CR_PLL3RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + +#if defined(RCC_D1CFGR_HPRE) + /* Reset D1CFGR register */ + CLEAR_REG(RCC->D1CFGR); + + /* Reset D2CFGR register */ + CLEAR_REG(RCC->D2CFGR); + + /* Reset D3CFGR register */ + CLEAR_REG(RCC->D3CFGR); +#else + /* Reset CDCFGR1 register */ + CLEAR_REG(RCC->CDCFGR1); + + /* Reset CDCFGR2 register */ + CLEAR_REG(RCC->CDCFGR2); + + /* Reset SRDCFGR register */ + CLEAR_REG(RCC->SRDCFGR); +#endif + + /* Reset PLLCKSELR register to default value */ + RCC->PLLCKSELR = RCC_PLLCKSELR_DIVM1_5 | RCC_PLLCKSELR_DIVM2_5 | RCC_PLLCKSELR_DIVM3_5; + + /* Reset PLLCFGR register to default value */ + WRITE_REG(RCC->PLLCFGR, 0x01FF0000U); + + /* Reset PLL1DIVR register to default value */ + WRITE_REG(RCC->PLL1DIVR, 0x01010280U); + + /* Reset PLL1FRACR register */ + CLEAR_REG(RCC->PLL1FRACR); + + /* Reset PLL2DIVR register to default value */ + WRITE_REG(RCC->PLL2DIVR, 0x01010280U); + + /* Reset PLL2FRACR register */ + CLEAR_REG(RCC->PLL2FRACR); + + /* Reset PLL3DIVR register to default value */ + WRITE_REG(RCC->PLL3DIVR, 0x01010280U); + + /* Reset PLL3FRACR register */ + CLEAR_REG(RCC->PLL3FRACR); + +#if defined(RCC_CR_HSEEXT) + /* Reset HSEEXT */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEEXT); +#endif /* RCC_CR_HSEEXT */ + + /* Reset HSEBYP bit */ + CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); + + /* Disable all interrupts */ + CLEAR_REG(RCC->CIER); + + /* Clear all interrupts flags */ + WRITE_REG(RCC->CICR, 0xFFFFFFFFU); + + /* Reset all RSR flags */ + SET_BIT(RCC->RSR, RCC_RSR_RMVF); + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLASH_LATENCY_DEFAULT < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_DEFAULT); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLASH_LATENCY_DEFAULT) + { + return HAL_ERROR; + } + + } + + return HAL_OK; +} + +/** + * @brief Initializes the RCC Oscillators according to the specified parameters in the + * RCC_OscInitTypeDef. + * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @note The PLL is not disabled when used as system clock. + * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not + * supported by this function. User should request a transition to LSE Off + * first and then LSE On or LSE Bypass. + * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not + * supported by this function. User should request a transition to HSE Off + * first and then HSE On or HSE Bypass. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + uint32_t temp1_pllckcfg, temp2_pllckcfg; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllckselr = RCC->PLLCKSELR; + /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */ + if ((temp_sysclksrc == RCC_CFGR_SWS_HSE) || ((temp_sysclksrc == RCC_CFGR_SWS_PLL1) && ((temp_pllckselr & RCC_PLLCKSELR_PLLSRC) == RCC_PLLCKSELR_PLLSRC_HSE))) + { + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) + { + return HAL_ERROR; + } + } + else + { + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == 0U) + { + if ((uint32_t)(HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0U) + { + if ((uint32_t)(HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- HSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + assert_param(IS_RCC_HSICALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); + + /* When the HSI is used as system clock it will not be disabled */ + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllckselr = RCC->PLLCKSELR; + if ((temp_sysclksrc == RCC_CFGR_SWS_HSI) || ((temp_sysclksrc == RCC_CFGR_SWS_PLL1) && ((temp_pllckselr & RCC_PLLCKSELR_PLLSRC) == RCC_PLLCKSELR_PLLSRC_HSI))) + { + /* When HSI is used as system clock it will not be disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF)) + { + return HAL_ERROR; + } + /* Otherwise, only HSI division and calibration are allowed */ + else + { + /* Enable the Internal High Speed oscillator (HSI, HSIDIV2, HSIDIV4, or HSIDIV8) */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIState); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == 0U) + { + if ((uint32_t)(HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + } + + else + { + /* Check the HSI State */ + if ((RCC_OscInitStruct->HSIState) != RCC_HSI_OFF) + { + /* Enable the Internal High Speed oscillator (HSI, HSIDIV2,HSIDIV4, or HSIDIV8) */ + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIState); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ + __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (HSI). */ + __HAL_RCC_HSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*----------------------------- CSI Configuration --------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_CSI) == RCC_OSCILLATORTYPE_CSI) + { + /* Check the parameters */ + assert_param(IS_RCC_CSI(RCC_OscInitStruct->CSIState)); + assert_param(IS_RCC_CSICALIBRATION_VALUE(RCC_OscInitStruct->CSICalibrationValue)); + + /* When the CSI is used as system clock it will not disabled */ + const uint32_t temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE(); + const uint32_t temp_pllckselr = RCC->PLLCKSELR; + if ((temp_sysclksrc == RCC_CFGR_SWS_CSI) || ((temp_sysclksrc == RCC_CFGR_SWS_PLL1) && ((temp_pllckselr & RCC_PLLCKSELR_PLLSRC) == RCC_PLLCKSELR_PLLSRC_CSI))) + { + /* When CSI is used as system clock it will not disabled */ + if ((__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) != 0U) && (RCC_OscInitStruct->CSIState != RCC_CSI_ON)) + { + return HAL_ERROR; + } + /* Otherwise, just the calibration is allowed */ + else + { + /* Adjusts the Internal High Speed oscillator (CSI) calibration value.*/ + __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->CSICalibrationValue); + } + } + else + { + /* Check the CSI State */ + if ((RCC_OscInitStruct->CSIState) != RCC_CSI_OFF) + { + /* Enable the Internal High Speed oscillator (CSI). */ + __HAL_RCC_CSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till CSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > CSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Adjusts the Internal High Speed oscillator (CSI) calibration value.*/ + __HAL_RCC_CSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->CSICalibrationValue); + } + else + { + /* Disable the Internal High Speed oscillator (CSI). */ + __HAL_RCC_CSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till CSI is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > CSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + } + /*------------------------------ LSI Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if ((RCC_OscInitStruct->LSIState) != RCC_LSI_OFF) + { + /* Enable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*------------------------------ HSI48 Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48) + { + /* Check the parameters */ + assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State)); + + /* Check the HSI48 State */ + if ((RCC_OscInitStruct->HSI48State) != RCC_HSI48_OFF) + { + /* Enable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_ENABLE(); + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the Internal Low Speed oscillator (HSI48). */ + __HAL_RCC_HSI48_DISABLE(); + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait till HSI48 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Enable write access to Backup domain */ + PWR->CR1 |= PWR_CR1_DBP; + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Set the new LSE configuration -----------------------------------------*/ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + /* Check the LSE State */ + if ((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + /*-------------------------------- PLL Configuration -----------------------*/ + /* Check the parameters */ + assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); + if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) + { + /* Check if the PLL is used as system clock or not */ + if (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL1) + { + if ((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) + { + /* Check the parameters */ + assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); + assert_param(IS_RCC_PLLRGE_VALUE(RCC_OscInitStruct->PLL.PLLRGE)); + assert_param(IS_RCC_PLLVCO_VALUE(RCC_OscInitStruct->PLL.PLLVCOSEL)); + assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM)); + assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN)); + assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP)); + assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ)); + assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR)); + assert_param(IS_RCC_PLLFRACN_VALUE(RCC_OscInitStruct->PLL.PLLFRACN)); + + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the main PLL clock source, multiplication and division factors. */ + __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, + RCC_OscInitStruct->PLL.PLLM, + RCC_OscInitStruct->PLL.PLLN, + RCC_OscInitStruct->PLL.PLLP, + RCC_OscInitStruct->PLL.PLLQ, + RCC_OscInitStruct->PLL.PLLR); + + /* Disable PLLFRACN . */ + __HAL_RCC_PLLFRACN_DISABLE(); + + /* Configure PLL PLL1FRACN */ + __HAL_RCC_PLLFRACN_CONFIG(RCC_OscInitStruct->PLL.PLLFRACN); + + /* Select PLL1 input reference frequency range: VCI */ + __HAL_RCC_PLL_VCIRANGE(RCC_OscInitStruct->PLL.PLLRGE) ; + + /* Select PLL1 output frequency range : VCO */ + __HAL_RCC_PLL_VCORANGE(RCC_OscInitStruct->PLL.PLLVCOSEL) ; + + /* Enable PLL System Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVP); + + /* Enable PLL1Q Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* Enable PLL1R Clock output. */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVR); + + /* Enable PLL1FRACN . */ + __HAL_RCC_PLLFRACN_ENABLE(); + + /* Enable the main PLL. */ + __HAL_RCC_PLL_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Disable the main PLL. */ + __HAL_RCC_PLL_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Do not return HAL_ERROR if request repeats the current configuration */ + temp1_pllckcfg = RCC->PLLCKSELR; + temp2_pllckcfg = RCC->PLL1DIVR; + if (((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_OFF) || + (READ_BIT(temp1_pllckcfg, RCC_PLLCKSELR_PLLSRC) != RCC_OscInitStruct->PLL.PLLSource) || + ((READ_BIT(temp1_pllckcfg, RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos) != RCC_OscInitStruct->PLL.PLLM) || + (READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_N1) != (RCC_OscInitStruct->PLL.PLLN - 1U)) || + ((READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_P1) >> RCC_PLL1DIVR_P1_Pos) != (RCC_OscInitStruct->PLL.PLLP - 1U)) || + ((READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_Q1) >> RCC_PLL1DIVR_Q1_Pos) != (RCC_OscInitStruct->PLL.PLLQ - 1U)) || + ((READ_BIT(temp2_pllckcfg, RCC_PLL1DIVR_R1) >> RCC_PLL1DIVR_R1_Pos) != (RCC_OscInitStruct->PLL.PLLR - 1U))) + { + return HAL_ERROR; + } + else + { + /* Check if only fractional part needs to be updated */ + temp1_pllckcfg = ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> RCC_PLL1FRACR_FRACN1_Pos); + if (RCC_OscInitStruct->PLL.PLLFRACN != temp1_pllckcfg) + { + assert_param(IS_RCC_PLLFRACN_VALUE(RCC_OscInitStruct->PLL.PLLFRACN)); + /* Disable PLL1FRACEN */ + __HAL_RCC_PLLFRACN_DISABLE(); + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + /* Wait at least 2 CK_REF (PLL input source divided by M) period to make sure next latched value will be taken into account. */ + while ((HAL_GetTick() - tickstart) < PLL_FRAC_TIMEOUT_VALUE) + { + } + /* Configure PLL1 PLL1FRACN */ + __HAL_RCC_PLLFRACN_CONFIG(RCC_OscInitStruct->PLL.PLLFRACN); + /* Enable PLL1FRACEN to latch new value. */ + __HAL_RCC_PLLFRACN_ENABLE(); + } + } + } + } + return HAL_OK; +} + +/** + * @brief Initializes the CPU, AHB and APB buses clocks according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency: FLASH Latency, this parameter depend on device selected + * + * @note The SystemCoreClock CMSIS variable is used to store System Core Clock Frequency + * and updated by HAL_InitTick() function called within this function + * + * @note The HSI is used (enabled by hardware) as system clock source after + * start-up from Reset, wake-up from STOP and STANDBY mode, or in case + * of failure of the HSE used directly or indirectly as system clock + * (if the Clock Security System CSS is enabled). + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after start-up delay or PLL locked). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source will be ready. + * You can use HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * @note Depending on the device voltage range, the software has to set correctly + * D1CPRE[3:0] bits to ensure that Domain1 core clock not exceed the maximum allowed frequency + * (for more details refer to section above "Initialization/de-initialization functions") + * @retval None + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + HAL_StatusTypeDef halstatus; + uint32_t tickstart; + uint32_t common_system_clock; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); + assert_param(IS_FLASH_LATENCY(FLatency)); + + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the CPU clock + (HCLK) and the supply voltage of the device. */ + + /* Increasing the CPU frequency */ + if (FLatency > __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + + } + + /* Increasing the BUS frequency divider */ + /*-------------------------- D1PCLK1/CDPCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D1PCLK1) == RCC_CLOCKTYPE_D1PCLK1) + { +#if defined (RCC_D1CFGR_D1PPRE) + if ((RCC_ClkInitStruct->APB3CLKDivider) > (RCC->D1CFGR & RCC_D1CFGR_D1PPRE)) + { + assert_param(IS_RCC_D1PCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1PPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#else + if ((RCC_ClkInitStruct->APB3CLKDivider) > (RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE)) + { + assert_param(IS_RCC_CDPCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#endif + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { +#if defined (RCC_D2CFGR_D2PPRE1) + if ((RCC_ClkInitStruct->APB1CLKDivider) > (RCC->D2CFGR & RCC_D2CFGR_D2PPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB1CLKDivider) > (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#endif + } + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { +#if defined(RCC_D2CFGR_D2PPRE2) + if ((RCC_ClkInitStruct->APB2CLKDivider) > (RCC->D2CFGR & RCC_D2CFGR_D2PPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB2CLKDivider) > (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#endif + } + + /*-------------------------- D3PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D3PCLK1) == RCC_CLOCKTYPE_D3PCLK1) + { +#if defined(RCC_D3CFGR_D3PPRE) + if ((RCC_ClkInitStruct->APB4CLKDivider) > (RCC->D3CFGR & RCC_D3CFGR_D3PPRE)) + { + assert_param(IS_RCC_D3PCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->D3CFGR, RCC_D3CFGR_D3PPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB4CLKDivider) > (RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE)) + { + assert_param(IS_RCC_D3PCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#endif + } + + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { +#if defined (RCC_D1CFGR_HPRE) + if ((RCC_ClkInitStruct->AHBCLKDivider) > (RCC->D1CFGR & RCC_D1CFGR_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#else + if ((RCC_ClkInitStruct->AHBCLKDivider) > (RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#endif + } + + /*------------------------- SYSCLK Configuration -------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) + { + assert_param(IS_RCC_SYSCLK(RCC_ClkInitStruct->SYSCLKDivider)); + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); +#if defined(RCC_D1CFGR_D1CPRE) + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1CPRE, RCC_ClkInitStruct->SYSCLKDivider); +#else + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDCPRE, RCC_ClkInitStruct->SYSCLKDivider); +#endif + /* HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) + { + /* Check the HSE ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == 0U) + { + return HAL_ERROR; + } + } + /* PLL is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == 0U) + { + return HAL_ERROR; + } + } + /* CSI is selected as System Clock Source */ + else if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_CSI) + { + /* Check the PLL ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_CSIRDY) == 0U) + { + return HAL_ERROR; + } + } + /* HSI is selected as System Clock Source */ + else + { + /* Check the HSI ready flag */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == 0U) + { + return HAL_ERROR; + } + } + MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + while (__HAL_RCC_GET_SYSCLK_SOURCE() != (RCC_ClkInitStruct->SYSCLKSource << RCC_CFGR_SWS_Pos)) + { + if ((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + /* Decreasing the BUS frequency divider */ + /*-------------------------- HCLK Configuration --------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) + { +#if defined(RCC_D1CFGR_HPRE) + if ((RCC_ClkInitStruct->AHBCLKDivider) < (RCC->D1CFGR & RCC_D1CFGR_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#else + if ((RCC_ClkInitStruct->AHBCLKDivider) < (RCC->CDCFGR1 & RCC_CDCFGR1_HPRE)) + { + /* Set the new HCLK clock divider */ + assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_HPRE, RCC_ClkInitStruct->AHBCLKDivider); + } +#endif + } + + /* Decreasing the number of wait states because of lower CPU frequency */ + if (FLatency < __HAL_FLASH_GET_LATENCY()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ + __HAL_FLASH_SET_LATENCY(FLatency); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_ACR register */ + if (__HAL_FLASH_GET_LATENCY() != FLatency) + { + return HAL_ERROR; + } + } + + /*-------------------------- D1PCLK1/CDPCLK Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D1PCLK1) == RCC_CLOCKTYPE_D1PCLK1) + { +#if defined(RCC_D1CFGR_D1PPRE) + if ((RCC_ClkInitStruct->APB3CLKDivider) < (RCC->D1CFGR & RCC_D1CFGR_D1PPRE)) + { + assert_param(IS_RCC_D1PCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->D1CFGR, RCC_D1CFGR_D1PPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#else + if ((RCC_ClkInitStruct->APB3CLKDivider) < (RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE)) + { + assert_param(IS_RCC_CDPCLK1(RCC_ClkInitStruct->APB3CLKDivider)); + MODIFY_REG(RCC->CDCFGR1, RCC_CDCFGR1_CDPPRE, RCC_ClkInitStruct->APB3CLKDivider); + } +#endif + } + + /*-------------------------- PCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) + { +#if defined(RCC_D2CFGR_D2PPRE1) + if ((RCC_ClkInitStruct->APB1CLKDivider) < (RCC->D2CFGR & RCC_D2CFGR_D2PPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB1CLKDivider) < (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1)) + { + assert_param(IS_RCC_PCLK1(RCC_ClkInitStruct->APB1CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE1, (RCC_ClkInitStruct->APB1CLKDivider)); + } +#endif + } + + /*-------------------------- PCLK2 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) + { +#if defined (RCC_D2CFGR_D2PPRE2) + if ((RCC_ClkInitStruct->APB2CLKDivider) < (RCC->D2CFGR & RCC_D2CFGR_D2PPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->D2CFGR, RCC_D2CFGR_D2PPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB2CLKDivider) < (RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2)) + { + assert_param(IS_RCC_PCLK2(RCC_ClkInitStruct->APB2CLKDivider)); + MODIFY_REG(RCC->CDCFGR2, RCC_CDCFGR2_CDPPRE2, (RCC_ClkInitStruct->APB2CLKDivider)); + } +#endif + } + + /*-------------------------- D3PCLK1/SRDPCLK1 Configuration ---------------------------*/ + if (((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_D3PCLK1) == RCC_CLOCKTYPE_D3PCLK1) + { +#if defined(RCC_D3CFGR_D3PPRE) + if ((RCC_ClkInitStruct->APB4CLKDivider) < (RCC->D3CFGR & RCC_D3CFGR_D3PPRE)) + { + assert_param(IS_RCC_D3PCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->D3CFGR, RCC_D3CFGR_D3PPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#else + if ((RCC_ClkInitStruct->APB4CLKDivider) < (RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE)) + { + assert_param(IS_RCC_SRDPCLK1(RCC_ClkInitStruct->APB4CLKDivider)); + MODIFY_REG(RCC->SRDCFGR, RCC_SRDCFGR_SRDPPRE, (RCC_ClkInitStruct->APB4CLKDivider)); + } +#endif + } + + /* Update the SystemCoreClock global variable */ +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos]) & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos]) & 0x1FU); +#endif + +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + /* Configure the source of time base considering new system clocks settings*/ + halstatus = HAL_InitTick(uwTickPrio); + + return halstatus; +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + +@endverbatim + * @{ + */ + +/** + * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9). + * @note PA8/PC9 should be configured in alternate function mode. + * @param RCC_MCOx: specifies the output direction for the clock source. + * This parameter can be one of the following values: + * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8). + * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9). + * @param RCC_MCOSource: specifies the clock source to output. + * This parameter can be one of the following values: + * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_PLL1QCLK: PLL1Q clock selected as MCO1 source + * @arg RCC_MCO1SOURCE_HSI48: HSI48 (48MHZ) selected as MCO1 source + * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLL2PCLK: PLL2P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_PLLCLK: PLL1P clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_CSICLK: CSI clock selected as MCO2 source + * @arg RCC_MCO2SOURCE_LSICLK: LSI clock selected as MCO2 source + * @param RCC_MCODiv: specifies the MCOx pre-scaler. + * This parameter can be one of the following values: + * @arg RCC_MCODIV_1 up to RCC_MCODIV_15 : divider applied to MCOx clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + /* RCC_MCO1 */ + if (RCC_MCOx == RCC_MCO1) + { + assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); + + /* MCO1 Clock Enable */ + MCO1_CLK_ENABLE(); + + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCO1 and MCO1PRE[3:0] bits then Select MCO1 clock source and pre-scaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv)); + } + else + { + assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource)); + + /* MCO2 Clock Enable */ + MCO2_CLK_ENABLE(); + + /* Configure the MCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO2_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF0_MCO; + HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); + + /* Mask MCO2 and MCO2PRE[3:0] bits then Select MCO2 clock source and pre-scaler */ + MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 7U))); + } +} + +/** + * @brief Enables the Clock Security System. + * @note If a failure is detected on the HSE oscillator clock, this oscillator + * is automatically disabled and an interrupt is generated to inform the + * software about the failure (Clock Security System Interrupt, CSSI), + * allowing the MCU to perform rescue operations. The CSSI is linked to + * the Cortex-M NMI (Non-Mask-able Interrupt) exception vector. + * @retval None + */ +void HAL_RCC_EnableCSS(void) +{ + SET_BIT(RCC->CR, RCC_CR_CSSHSEON) ; +} + +/** + * @brief Disables the Clock Security System. + * @retval None + */ +void HAL_RCC_DisableCSS(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_CSSHSEON); +} + +/** + * @brief Returns the SYSCLK frequency + * + * @note The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note If SYSCLK source is CSI, function returns values based on CSI_VALUE(*) + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note If SYSCLK source is PLL, function returns values based on CSI_VALUE(*), + * HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors. + * @note (*) CSI_VALUE is a constant defined in stm32h7xx_hal_conf.h file (default value + * 4 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (**) HSI_VALUE is a constant defined in stm32h7xx_hal_conf.h file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in stm32h7xx_hal_conf.h file (default value + * 25 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * @note The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @note This function can be used by the user application to compute the + * baud rate for the communication peripherals or configure other parameters. + * + * @note Each time SYSCLK changes, this function must be called to update the + * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + uint32_t pllp, pllsource, pllm, pllfracen, hsivalue; + float_t fracn1, pllvco; + uint32_t sysclockfreq; + + /* Get SYSCLK source -------------------------------------------------------*/ + + switch (RCC->CFGR & RCC_CFGR_SWS) + { + case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + sysclockfreq = (uint32_t)(HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + sysclockfreq = (uint32_t) HSI_VALUE; + } + + break; + + case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */ + sysclockfreq = CSI_VALUE; + break; + + case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */ + sysclockfreq = HSE_VALUE; + break; + + case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN + SYSCLK = PLL_VCO / PLLR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> 4) ; + pllfracen = ((RCC-> PLLCFGR & RCC_PLLCFGR_PLL1FRACEN) >> RCC_PLLCFGR_PLL1FRACEN_Pos); + fracn1 = (float_t)(uint32_t)(pllfracen * ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> 3)); + + if (pllm != 0U) + { + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pllvco = ((float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + else + { + pllvco = ((float_t)HSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + break; + + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + default: + pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + } + pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> 9) + 1U) ; + sysclockfreq = (uint32_t)(float_t)(pllvco / (float_t)pllp); + } + else + { + sysclockfreq = 0U; + } + break; + + default: + sysclockfreq = CSI_VALUE; + break; + } + + return sysclockfreq; +} + + +/** + * @brief Returns the HCLK frequency + * @note Each time HCLK changes, this function must be called to update the + * right HCLK value. Otherwise, any configuration based on this function will be incorrect. + * + * @note The SystemD2Clock CMSIS variable is used to store System domain2 Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCC_GetHCLKFreq(void) +{ + uint32_t common_system_clock; + +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos] & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos] & 0x1FU); +#endif + +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + return SystemD2Clock; +} + + +/** + * @brief Returns the PCLK1 frequency + * @note Each time PCLK1 changes, this function must be called to update the + * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK1Freq(void) +{ +#if defined (RCC_D2CFGR_D2PPRE1) + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->D2CFGR & RCC_D2CFGR_D2PPRE1) >> RCC_D2CFGR_D2PPRE1_Pos]) & 0x1FU)); +#else + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1) >> RCC_CDCFGR2_CDPPRE1_Pos]) & 0x1FU)); +#endif +} + + +/** + * @brief Returns the D2 PCLK2 frequency + * @note Each time PCLK2 changes, this function must be called to update the + * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. + * @retval PCLK1 frequency + */ +uint32_t HAL_RCC_GetPCLK2Freq(void) +{ + /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ +#if defined(RCC_D2CFGR_D2PPRE2) + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->D2CFGR & RCC_D2CFGR_D2PPRE2) >> RCC_D2CFGR_D2PPRE2_Pos]) & 0x1FU)); +#else + return (HAL_RCC_GetHCLKFreq() >> ((D1CorePrescTable[(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2) >> RCC_CDCFGR2_CDPPRE2_Pos]) & 0x1FU)); +#endif +} + +/** + * @brief Configures the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_CSI | \ + RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI48; + + /* Get the HSE configuration -----------------------------------------------*/ +#if defined(RCC_CR_HSEEXT) + if ((RCC->CR & (RCC_CR_HSEBYP | RCC_CR_HSEEXT)) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & (RCC_CR_HSEBYP | RCC_CR_HSEEXT)) == (RCC_CR_HSEBYP | RCC_CR_HSEEXT)) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS_DIGITAL; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } +#else + if ((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP) + { + RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; + } + else if ((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } +#endif /* RCC_CR_HSEEXT */ + + /* Get the CSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_CSION) == RCC_CR_CSION) + { + RCC_OscInitStruct->CSIState = RCC_CSI_ON; + } + else + { + RCC_OscInitStruct->CSIState = RCC_CSI_OFF; + } + +#if defined(RCC_VER_X) + if (HAL_GetREVID() <= REV_ID_Y) + { + RCC_OscInitStruct->CSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, HAL_RCC_REV_Y_CSITRIM_Msk) >> HAL_RCC_REV_Y_CSITRIM_Pos); + } + else + { + RCC_OscInitStruct->CSICalibrationValue = (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); + } +#else + RCC_OscInitStruct->CSICalibrationValue = (uint32_t)(READ_BIT(RCC->CSICFGR, RCC_CSICFGR_CSITRIM) >> RCC_CSICFGR_CSITRIM_Pos); +#endif /*RCC_VER_X*/ + + /* Get the HSI configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION) + { + RCC_OscInitStruct->HSIState = RCC_HSI_ON; + } + else + { + RCC_OscInitStruct->HSIState = RCC_HSI_OFF; + } + +#if defined(RCC_VER_X) + if (HAL_GetREVID() <= REV_ID_Y) + { + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, HAL_RCC_REV_Y_HSITRIM_Msk) >> HAL_RCC_REV_Y_HSITRIM_Pos); + } + else + { + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); + } +#else + RCC_OscInitStruct->HSICalibrationValue = (uint32_t)(READ_BIT(RCC->HSICFGR, RCC_HSICFGR_HSITRIM) >> RCC_HSICFGR_HSITRIM_Pos); +#endif /*RCC_VER_X*/ + + /* Get the LSE configuration -----------------------------------------------*/ +#if defined(RCC_BDCR_LSEEXT) + if ((RCC->BDCR & (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT)) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT)) == (RCC_BDCR_LSEBYP | RCC_BDCR_LSEEXT)) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS_DIGITAL; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } +#else + if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) + { + RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; + } + else if ((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } +#endif /* RCC_BDCR_LSEEXT */ + + /* Get the LSI configuration -----------------------------------------------*/ + if ((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } + + /* Get the HSI48 configuration ---------------------------------------------*/ + if ((RCC->CR & RCC_CR_HSI48ON) == RCC_CR_HSI48ON) + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_ON; + } + else + { + RCC_OscInitStruct->HSI48State = RCC_HSI48_OFF; + } + + /* Get the PLL configuration -----------------------------------------------*/ + if ((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON) + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; + } + else + { + RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; + } + RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + RCC_OscInitStruct->PLL.PLLM = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> RCC_PLLCKSELR_DIVM1_Pos); + RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_N1) >> RCC_PLL1DIVR_N1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_R1) >> RCC_PLL1DIVR_R1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLP = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> RCC_PLL1DIVR_P1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_Q1) >> RCC_PLL1DIVR_Q1_Pos) + 1U; + RCC_OscInitStruct->PLL.PLLRGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL1RGE)); + RCC_OscInitStruct->PLL.PLLVCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL1VCOSEL) >> RCC_PLLCFGR_PLL1VCOSEL_Pos); + RCC_OscInitStruct->PLL.PLLFRACN = (uint32_t)(((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> RCC_PLL1FRACR_FRACN1_Pos)); +} + +/** + * @brief Configures the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency: Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Set all possible values for the Clock type parameter --------------------*/ + RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1 ; + + /* Get the SYSCLK configuration --------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); + +#if defined(RCC_D1CFGR_D1CPRE) + /* Get the SYSCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKDivider = (uint32_t)(RCC->D1CFGR & RCC_D1CFGR_D1CPRE); + + /* Get the D1HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->D1CFGR & RCC_D1CFGR_HPRE); + + /* Get the APB3 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB3CLKDivider = (uint32_t)(RCC->D1CFGR & RCC_D1CFGR_D1PPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->D2CFGR & RCC_D2CFGR_D2PPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)(RCC->D2CFGR & RCC_D2CFGR_D2PPRE2); + + /* Get the APB4 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB4CLKDivider = (uint32_t)(RCC->D3CFGR & RCC_D3CFGR_D3PPRE); +#else + /* Get the SYSCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->SYSCLKDivider = (uint32_t)(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE); + + /* Get the D1HCLK configuration ----------------------------------------------*/ + RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE); + + /* Get the APB3 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB3CLKDivider = (uint32_t)(RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE); + + /* Get the APB1 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE1); + + /* Get the APB2 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)(RCC->CDCFGR2 & RCC_CDCFGR2_CDPPRE2); + + /* Get the APB4 configuration ----------------------------------------------*/ + RCC_ClkInitStruct->APB4CLKDivider = (uint32_t)(RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE); +#endif + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); +} + +/** + * @brief This function handles the RCC CSS interrupt request. + * @note This API should be called under the NMI_Handler(). + * @retval None + */ +void HAL_RCC_NMI_IRQHandler(void) +{ + /* Check RCC CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_CSS)) + { + /* RCC Clock Security System interrupt user callback */ + HAL_RCC_CSSCallback(); + + /* Clear RCC CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_CSS); + } +} + +/** + * @brief RCC Clock Security System interrupt callback + * @retval none + */ +__weak void HAL_RCC_CSSCallback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_RCC_CSSCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c new file mode 100644 index 0000000..b771887 --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c @@ -0,0 +1,3935 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extension peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file in + * the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_defines RCCEx Private Defines + * @{ + */ +#define PLL2_TIMEOUT_VALUE PLL_TIMEOUT_VALUE /* 2 ms */ +#define PLL3_TIMEOUT_VALUE PLL_TIMEOUT_VALUE /* 2 ms */ + +#define DIVIDER_P_UPDATE 0U +#define DIVIDER_Q_UPDATE 1U +#define DIVIDER_R_UPDATE 2U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Macros RCCEx Private Macros + * @{ + */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static HAL_StatusTypeDef RCCEx_PLL2_Config(RCC_PLL2InitTypeDef *pll2, uint32_t Divider); +static HAL_StatusTypeDef RCCEx_PLL3_Config(RCC_PLL3InitTypeDef *pll3, uint32_t Divider); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + [..] + (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to + select the RTC clock source; in this case the Backup domain will be reset in + order to modify the RTC Clock source, as consequence RTC registers (including + the backup registers) and RCC_BDCR register are set to their reset values. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the RCC extended peripherals clocks according to the specified + * parameters in the RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * contains the configuration information for the Extended Peripherals + * clocks (SDMMC, CKPER, FMC, QSPI*, OSPI*, DSI, SPI45, SPDIF, DFSDM1, DFSDM2*, FDCAN, SWPMI, SAI23*,SAI2A*, SAI2B*, SAI1, SPI123, + * USART234578, USART16 (USART16910*), RNG, HRTIM1*, I2C123 (I2C1235*), USB, CEC, LPTIM1, LPUART1, I2C4, LPTIM2, LPTIM345, ADC, + * SAI4A*, SAI4B*, SPI6, RTC). + * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select + * the RTC clock source; in this case the Backup domain will be reset in + * order to modify the RTC Clock source, as consequence RTC registers (including + * the backup registers) are set to their reset values. + * + * (*) : Available on some STM32H7 lines only. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + uint32_t tmpreg; + uint32_t tickstart; + HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ + HAL_StatusTypeDef status = HAL_OK; /* Final status */ + + /*---------------------------- SPDIFRX configuration -------------------------------*/ + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) + { + + switch (PeriphClkInit->SpdifrxClockSelection) + { + case RCC_SPDIFRXCLKSOURCE_PLL: /* PLL is used as clock source for SPDIFRX*/ + /* Enable PLL1Q Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL2: /* PLL2 is used as clock source for SPDIFRX*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_PLL3: /* PLL3 is used as clock source for SPDIFRX*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + case RCC_SPDIFRXCLKSOURCE_HSI: + /* Internal OSC clock is used as source of SPDIFRX clock*/ + /* SPDIFRX clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPDIFRX clock*/ + __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifrxClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SAI1 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) + { + switch (PeriphClkInit->Sai1ClockSelection) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI1*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI1*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_PIN: + /* External clock is used as source of SAI1 clock*/ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI1 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI1 clock*/ + __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(SAI3) + /*---------------------------- SAI2/3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI23) == RCC_PERIPHCLK_SAI23) + { + switch (PeriphClkInit->Sai23ClockSelection) + { + case RCC_SAI23CLKSOURCE_PLL: /* PLL is used as clock source for SAI2/3 */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2/3 */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2/3 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_PIN: + /* External clock is used as source of SAI2/3 clock*/ + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI23CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2/3 clock */ + /* SAI2/3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2/3 clock*/ + __HAL_RCC_SAI23_CONFIG(PeriphClkInit->Sai23ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) + /*---------------------------- SAI2A configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2A) == RCC_PERIPHCLK_SAI2A) + { + switch (PeriphClkInit->Sai2AClockSelection) + { + case RCC_SAI2ACLKSOURCE_PLL: /* PLL is used as clock source for SAI2A */ + /* Enable SAI2A Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2A */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2A */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_PIN: + /* External clock is used as source of SAI2A clock*/ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2A clock */ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2ACLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI2A clock */ + /* SAI2A clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2A clock*/ + __HAL_RCC_SAI2A_CONFIG(PeriphClkInit->Sai2AClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI2A*/ + +#if defined(RCC_CDCCIP1R_SAI2BSEL) + + /*---------------------------- SAI2B configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2B) == RCC_PERIPHCLK_SAI2B) + { + switch (PeriphClkInit->Sai2BClockSelection) + { + case RCC_SAI2BCLKSOURCE_PLL: /* PLL is used as clock source for SAI2B */ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2B */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2B */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_PIN: + /* External clock is used as source of SAI2B clock*/ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2B clock */ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + case RCC_SAI2BCLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI2B clock */ + /* SAI2B clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI2B clock*/ + __HAL_RCC_SAI2B_CONFIG(PeriphClkInit->Sai2BClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI2B*/ + +#if defined(SAI4) + /*---------------------------- SAI4A configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI4A) == RCC_PERIPHCLK_SAI4A) + { + switch (PeriphClkInit->Sai4AClockSelection) + { + case RCC_SAI4ACLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_PIN: + /* External clock is used as source of SAI2 clock*/ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4ACLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + +#if defined(RCC_VER_3_0) + case RCC_SAI4ACLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI4A clock */ + /* SAI4A clock source configuration done later after clock selection check */ + break; +#endif /* RCC_VER_3_0 */ + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI4A clock*/ + __HAL_RCC_SAI4A_CONFIG(PeriphClkInit->Sai4AClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + /*---------------------------- SAI4B configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI4B) == RCC_PERIPHCLK_SAI4B) + { + switch (PeriphClkInit->Sai4BClockSelection) + { + case RCC_SAI4BCLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ + /* Enable SAI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PLL2: /* PLL2 is used as clock source for SAI2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PLL3: /* PLL3 is used as clock source for SAI2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SAI1 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_PIN: + /* External clock is used as source of SAI2 clock*/ + /* SAI2 clock source configuration done later after clock selection check */ + break; + + case RCC_SAI4BCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SAI2 clock */ + /* SAI1 clock source configuration done later after clock selection check */ + break; + +#if defined(RCC_VER_3_0) + case RCC_SAI4BCLKSOURCE_SPDIF: + /* SPDIF clock is used as source of SAI4B clock */ + /* SAI4B clock source configuration done later after clock selection check */ + break; +#endif /* RCC_VER_3_0 */ + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SAI4B clock*/ + __HAL_RCC_SAI4B_CONFIG(PeriphClkInit->Sai4BClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*SAI4*/ + +#if defined(QUADSPI) + /*---------------------------- QSPI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_QSPI) == RCC_PERIPHCLK_QSPI) + { + switch (PeriphClkInit->QspiClockSelection) + { + case RCC_QSPICLKSOURCE_PLL: /* PLL is used as clock source for QSPI*/ + /* Enable QSPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* QSPI clock source configuration done later after clock selection check */ + break; + + case RCC_QSPICLKSOURCE_PLL2: /* PLL2 is used as clock source for QSPI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* QSPI clock source configuration done later after clock selection check */ + break; + + + case RCC_QSPICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of QSPI clock */ + /* QSPI clock source configuration done later after clock selection check */ + break; + + case RCC_QSPICLKSOURCE_D1HCLK: + /* Domain1 HCLK clock selected as QSPI kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of QSPI clock*/ + __HAL_RCC_QSPI_CONFIG(PeriphClkInit->QspiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*QUADSPI*/ + +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /*---------------------------- OCTOSPI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) + { + switch (PeriphClkInit->OspiClockSelection) + { + case RCC_OSPICLKSOURCE_PLL: /* PLL is used as clock source for OSPI*/ + /* Enable OSPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* OSPI clock source configuration done later after clock selection check */ + break; + + case RCC_OSPICLKSOURCE_PLL2: /* PLL2 is used as clock source for OSPI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* OSPI clock source configuration done later after clock selection check */ + break; + + + case RCC_OSPICLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of OSPI clock */ + /* OSPI clock source configuration done later after clock selection check */ + break; + + case RCC_OSPICLKSOURCE_HCLK: + /* HCLK clock selected as OSPI kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of OSPI clock*/ + __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*OCTOSPI*/ + + /*---------------------------- SPI1/2/3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI123) == RCC_PERIPHCLK_SPI123) + { + switch (PeriphClkInit->Spi123ClockSelection) + { + case RCC_SPI123CLKSOURCE_PLL: /* PLL is used as clock source for SPI1/2/3 */ + /* Enable SPI Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI1/2/3 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI1/2/3 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_PIN: + /* External clock is used as source of SPI1/2/3 clock*/ + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI123CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of SPI1/2/3 clock */ + /* SPI1/2/3 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI1/2/3 clock*/ + __HAL_RCC_SPI123_CONFIG(PeriphClkInit->Spi123ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI4/5 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI45) == RCC_PERIPHCLK_SPI45) + { + switch (PeriphClkInit->Spi45ClockSelection) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* CD/D2 PCLK2 as clock source for SPI4/5 */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI4/5 */ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + case RCC_SPI45CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI4/5 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of SPI4/5 clock*/ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of SPI4/5 clock */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI45CLKSOURCE_HSE: + /* HSE, oscillator is used as source of SPI4/5 clock */ + /* SPI4/5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI4/5 clock*/ + __HAL_RCC_SPI45_CONFIG(PeriphClkInit->Spi45ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- SPI6 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI6) == RCC_PERIPHCLK_SPI6) + { + switch (PeriphClkInit->Spi6ClockSelection) + { + case RCC_SPI6CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for SPI6*/ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_PLL2: /* PLL2 is used as clock source for SPI6*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* SPI6 clock source configuration done later after clock selection check */ + break; + case RCC_SPI6CLKSOURCE_PLL3: /* PLL3 is used as clock source for SPI6*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of SPI6 clock*/ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; + + case RCC_SPI6CLKSOURCE_HSE: + /* HSE, oscillator is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; +#if defined(RCC_SPI6CLKSOURCE_PIN) + case RCC_SPI6CLKSOURCE_PIN: + /* 2S_CKIN is used as source of SPI6 clock */ + /* SPI6 clock source configuration done later after clock selection check */ + break; +#endif + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SPI6 clock*/ + __HAL_RCC_SPI6_CONFIG(PeriphClkInit->Spi6ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(DSI) + /*---------------------------- DSI configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) + { + switch (PeriphClkInit->DsiClockSelection) + { + + case RCC_DSICLKSOURCE_PLL2: /* PLL2 is used as clock source for DSI*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* DSI clock source configuration done later after clock selection check */ + break; + + case RCC_DSICLKSOURCE_PHY: + /* PHY is used as clock source for DSI*/ + /* DSI clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of DSI clock*/ + __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*DSI*/ + +#if defined(FDCAN1) || defined(FDCAN2) + /*---------------------------- FDCAN configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) + { + switch (PeriphClkInit->FdcanClockSelection) + { + case RCC_FDCANCLKSOURCE_PLL: /* PLL is used as clock source for FDCAN*/ + /* Enable FDCAN Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_PLL2: /* PLL2 is used as clock source for FDCAN*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + /* FDCAN clock source configuration done later after clock selection check */ + break; + + case RCC_FDCANCLKSOURCE_HSE: + /* HSE is used as clock source for FDCAN*/ + /* FDCAN clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FDCAN clock*/ + __HAL_RCC_FDCAN_CONFIG(PeriphClkInit->FdcanClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } +#endif /*FDCAN1 || FDCAN2*/ + + /*---------------------------- FMC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMC) == RCC_PERIPHCLK_FMC) + { + switch (PeriphClkInit->FmcClockSelection) + { + case RCC_FMCCLKSOURCE_PLL: /* PLL is used as clock source for FMC*/ + /* Enable FMC Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* FMC clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_PLL2: /* PLL2 is used as clock source for FMC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* FMC clock source configuration done later after clock selection check */ + break; + + + case RCC_FMCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of FMC clock */ + /* FMC clock source configuration done later after clock selection check */ + break; + + case RCC_FMCCLKSOURCE_HCLK: + /* D1/CD HCLK clock selected as FMC kernel peripheral clock */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of FMC clock*/ + __HAL_RCC_FMC_CONFIG(PeriphClkInit->FmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- RTC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) + { + /* check for RTC Parameters used to output RTCCLK */ + assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); + + /* Enable write access to Backup domain */ + SET_BIT(PWR->CR1, PWR_CR1_DBP); + + /* Wait for Backup domain Write protection disable */ + tickstart = HAL_GetTick(); + + while ((PWR->CR1 & PWR_CR1_DBP) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + + if (ret == HAL_OK) + { + /* Reset the Backup domain only if the RTC Clock source selection is modified */ + if ((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)) + { + /* Store the content of BDCR register before the reset of Backup Domain */ + tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); + /* RTC Clock selection can be changed only if the Backup Domain is reset */ + __HAL_RCC_BACKUPRESET_FORCE(); + __HAL_RCC_BACKUPRESET_RELEASE(); + /* Restore the Content of BDCR register */ + RCC->BDCR = tmpreg; + } + + /* If LSE is selected as RTC clock source (and enabled prior to Backup Domain reset), wait for LSE reactivation */ + if (PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + ret = HAL_TIMEOUT; + break; + } + } + } + + if (ret == HAL_OK) + { + __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + else + { + /* set overall return value */ + status = ret; + } + } + + + /*-------------------------- USART1/6 configuration --------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART16) == RCC_PERIPHCLK_USART16) + { + switch (PeriphClkInit->Usart16ClockSelection) + { + case RCC_USART16CLKSOURCE_PCLK2: /* CD/D2 PCLK2 as clock source for USART1/6 */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_PLL2: /* PLL2 is used as clock source for USART1/6 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_PLL3: /* PLL3 is used as clock source for USART1/6 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + case RCC_USART16CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART1/6 clock */ + /* USART1/6 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART1/6 clock */ + __HAL_RCC_USART16_CONFIG(PeriphClkInit->Usart16ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- USART2/3/4/5/7/8 Configuration --------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART234578) == RCC_PERIPHCLK_USART234578) + { + switch (PeriphClkInit->Usart234578ClockSelection) + { + case RCC_USART234578CLKSOURCE_PCLK1: /* CD/D2 PCLK1 as clock source for USART2/3/4/5/7/8 */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL2: /* PLL2 is used as clock source for USART2/3/4/5/7/8 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_PLL3: /* PLL3 is used as clock source for USART2/3/4/5/7/8 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + case RCC_USART234578CLKSOURCE_LSE: + /* LSE, oscillator is used as source of USART2/3/4/5/7/8 clock */ + /* USART2/3/4/5/7/8 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USART2/3/4/5/7/8 clock */ + __HAL_RCC_USART234578_CONFIG(PeriphClkInit->Usart234578ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*-------------------------- LPUART1 Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) + { + switch (PeriphClkInit->Lpuart1ClockSelection) + { + case RCC_LPUART1CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPUART1 */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPUART1 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPUART1 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_HSI: + /* HSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_CSI: + /* CSI oscillator clock is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPUART1CLKSOURCE_LSE: + /* LSE, oscillator is used as source of LPUART1 clock */ + /* LPUART1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPUART1 clock */ + __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM1 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) + { + switch (PeriphClkInit->Lptim1ClockSelection) + { + case RCC_LPTIM1CLKSOURCE_PCLK1: /* CD/D2 PCLK1 as clock source for LPTIM1*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM1*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM1*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM1 clock*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM1CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM1 clock*/ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM1CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM1 clock */ + /* LPTIM1 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM1 clock*/ + __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM2 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) + { + switch (PeriphClkInit->Lptim2ClockSelection) + { + case RCC_LPTIM2CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPTIM2*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM2*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM2*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM2 clock*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM2CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM2 clock*/ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM2CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM2 clock */ + /* LPTIM2 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM2 clock*/ + __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*---------------------------- LPTIM345 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM345) == RCC_PERIPHCLK_LPTIM345) + { + switch (PeriphClkInit->Lptim345ClockSelection) + { + + case RCC_LPTIM345CLKSOURCE_PCLK4: /* SRD/D3 PCLK1 (PCLK4) as clock source for LPTIM3/4/5 */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_PLL2: /* PLL2 is used as clock source for LPTIM3/4/5 */ + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_PLL3: /* PLL3 is used as clock source for LPTIM3/4/5 */ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_LSE: + /* External low speed OSC clock is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + case RCC_LPTIM345CLKSOURCE_LSI: + /* Internal low speed OSC clock is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + case RCC_LPTIM345CLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of LPTIM3/4/5 clock */ + /* LPTIM3/4/5 clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of LPTIM3/4/5 clock */ + __HAL_RCC_LPTIM345_CONFIG(PeriphClkInit->Lptim345ClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ I2C1/2/3/5* Configuration ------------------------*/ +#if defined(I2C5) + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1235) == RCC_PERIPHCLK_I2C1235) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C1235CLKSOURCE(PeriphClkInit->I2c1235ClockSelection)); + + if ((PeriphClkInit->I2c1235ClockSelection) == RCC_I2C1235CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C1235_CONFIG(PeriphClkInit->I2c1235ClockSelection); + + } +#else + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C123) == RCC_PERIPHCLK_I2C123) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C123CLKSOURCE(PeriphClkInit->I2c123ClockSelection)); + + if ((PeriphClkInit->I2c123ClockSelection) == RCC_I2C123CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C123_CONFIG(PeriphClkInit->I2c123ClockSelection); + + } +#endif /* I2C5 */ + + /*------------------------------ I2C4 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) + { + /* Check the parameters */ + assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); + + if ((PeriphClkInit->I2c4ClockSelection) == RCC_I2C4CLKSOURCE_PLL3) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } + + __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); + + } + + /*---------------------------- ADC configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) + { + switch (PeriphClkInit->AdcClockSelection) + { + + case RCC_ADCCLKSOURCE_PLL2: /* PLL2 is used as clock source for ADC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_PLL3: /* PLL3 is used as clock source for ADC*/ + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + /* ADC clock source configuration done later after clock selection check */ + break; + + case RCC_ADCCLKSOURCE_CLKP: + /* HSI, HSE, or CSI oscillator is used as source of ADC clock */ + /* ADC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of ADC clock*/ + __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + + /*------------------------------ USB Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) + { + + switch (PeriphClkInit->UsbClockSelection) + { + case RCC_USBCLKSOURCE_PLL: /* PLL is used as clock source for USB*/ + /* Enable USB Clock output generated form System USB . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* USB clock source configuration done later after clock selection check */ + break; + + case RCC_USBCLKSOURCE_PLL3: /* PLL3 is used as clock source for USB*/ + + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + + /* USB clock source configuration done later after clock selection check */ + break; + + case RCC_USBCLKSOURCE_HSI48: + /* HSI48 oscillator is used as source of USB clock */ + /* USB clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of USB clock*/ + __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + } + + /*------------------------------------- SDMMC Configuration ------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC) == RCC_PERIPHCLK_SDMMC) + { + /* Check the parameters */ + assert_param(IS_RCC_SDMMC(PeriphClkInit->SdmmcClockSelection)); + + switch (PeriphClkInit->SdmmcClockSelection) + { + case RCC_SDMMCCLKSOURCE_PLL: /* PLL is used as clock source for SDMMC*/ + /* Enable SDMMC Clock output generated form System PLL . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* SDMMC clock source configuration done later after clock selection check */ + break; + + case RCC_SDMMCCLKSOURCE_PLL2: /* PLL2 is used as clock source for SDMMC*/ + + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + /* SDMMC clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of SDMMC clock*/ + __HAL_RCC_SDMMC_CONFIG(PeriphClkInit->SdmmcClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + } + +#if defined(LTDC) + /*-------------------------------------- LTDC Configuration -----------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) + { + if (RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE) != HAL_OK) + { + status = HAL_ERROR; + } + } +#endif /* LTDC */ + + /*------------------------------ RNG Configuration -------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) + { + + switch (PeriphClkInit->RngClockSelection) + { + case RCC_RNGCLKSOURCE_PLL: /* PLL is used as clock source for RNG*/ + /* Enable RNG Clock output generated form System RNG . */ + __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVQ); + + /* RNG clock source configuration done later after clock selection check */ + break; + + case RCC_RNGCLKSOURCE_LSE: /* LSE is used as clock source for RNG*/ + + /* RNG clock source configuration done later after clock selection check */ + break; + + case RCC_RNGCLKSOURCE_LSI: /* LSI is used as clock source for RNG*/ + + /* RNG clock source configuration done later after clock selection check */ + break; + case RCC_RNGCLKSOURCE_HSI48: + /* HSI48 oscillator is used as source of RNG clock */ + /* RNG clock source configuration done later after clock selection check */ + break; + + default: + ret = HAL_ERROR; + break; + } + + if (ret == HAL_OK) + { + /* Set the source of RNG clock*/ + __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); + } + else + { + /* set overall return value */ + status = ret; + } + + } + + /*------------------------------ SWPMI1 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) + { + /* Check the parameters */ + assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); + + /* Configure the SWPMI1 interface clock source */ + __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); + } +#if defined(HRTIM1) + /*------------------------------ HRTIM1 clock Configuration ----------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_HRTIM1) == RCC_PERIPHCLK_HRTIM1) + { + /* Check the parameters */ + assert_param(IS_RCC_HRTIM1CLKSOURCE(PeriphClkInit->Hrtim1ClockSelection)); + + /* Configure the HRTIM1 clock source */ + __HAL_RCC_HRTIM1_CONFIG(PeriphClkInit->Hrtim1ClockSelection); + } +#endif /*HRTIM1*/ + /*------------------------------ DFSDM1 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); + + /* Configure the DFSDM1 interface clock source */ + __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); + } + +#if defined(DFSDM2_BASE) + /*------------------------------ DFSDM2 Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM2) == RCC_PERIPHCLK_DFSDM2) + { + /* Check the parameters */ + assert_param(IS_RCC_DFSDM2CLKSOURCE(PeriphClkInit->Dfsdm2ClockSelection)); + + /* Configure the DFSDM2 interface clock source */ + __HAL_RCC_DFSDM2_CONFIG(PeriphClkInit->Dfsdm2ClockSelection); + } +#endif /* DFSDM2 */ + + /*------------------------------------ TIM configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == RCC_PERIPHCLK_TIM) + { + /* Check the parameters */ + assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection)); + + /* Configure Timer Prescaler */ + __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection); + } + + /*------------------------------------ CKPER configuration --------------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CKPER) == RCC_PERIPHCLK_CKPER) + { + /* Check the parameters */ + assert_param(IS_RCC_CLKPSOURCE(PeriphClkInit->CkperClockSelection)); + + /* Configure the CKPER clock source */ + __HAL_RCC_CLKP_CONFIG(PeriphClkInit->CkperClockSelection); + } + + /*------------------------------ CEC Configuration ------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) + { + /* Check the parameters */ + assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection)); + + /* Configure the CEC interface clock source */ + __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection); + } + + /*---------------------------- PLL2 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVP) == RCC_PERIPHCLK_PLL2_DIVP) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_P_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVQ) == RCC_PERIPHCLK_PLL2_DIVQ) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_Q_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL2_DIVR) == RCC_PERIPHCLK_PLL2_DIVR) + { + ret = RCCEx_PLL2_Config(&(PeriphClkInit->PLL2), DIVIDER_R_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + /*---------------------------- PLL3 configuration -------------------------------*/ + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVP) == RCC_PERIPHCLK_PLL3_DIVP) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_P_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVQ) == RCC_PERIPHCLK_PLL3_DIVQ) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_Q_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + + if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_PLL3_DIVR) == RCC_PERIPHCLK_PLL3_DIVR) + { + ret = RCCEx_PLL3_Config(&(PeriphClkInit->PLL3), DIVIDER_R_UPDATE); + + if (ret == HAL_OK) + { + /*Nothing to do*/ + } + else + { + /* set overall return value */ + status = ret; + } + } + + if (status == HAL_OK) + { + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals clocks : + * (SDMMC, CKPER, FMC, QSPI*, OSPI*, DSI*, SPI45, SPDIF, DFSDM1, DFSDM2*, FDCAN, SWPMI, SAI23*, SAI1, SPI123, + * USART234578, USART16, RNG, HRTIM1*, I2C123 (I2C1235*), USB, CEC, LPTIM1, LPUART1, I2C4, LPTIM2, LPTIM345, ADC. + * SAI4A*, SAI4B*, SPI6, RTC, TIM). + * @retval None + * + * (*) : Available on some STM32H7 lines only. + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = + RCC_PERIPHCLK_USART16 | RCC_PERIPHCLK_USART234578 | RCC_PERIPHCLK_LPUART1 | + RCC_PERIPHCLK_I2C4 | RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_LPTIM345 | + RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SPI123 | RCC_PERIPHCLK_SPI45 | RCC_PERIPHCLK_SPI6 | + RCC_PERIPHCLK_FDCAN | RCC_PERIPHCLK_SDMMC | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_USB | + RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | RCC_PERIPHCLK_RTC | + RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMC | RCC_PERIPHCLK_SPDIFRX | RCC_PERIPHCLK_TIM | + RCC_PERIPHCLK_CKPER; + +#if defined(I2C5) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C1235; +#else + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2C123; +#endif /*I2C5*/ +#if defined(RCC_CDCCIP1R_SAI2ASEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI2A; +#endif /* RCC_CDCCIP1R_SAI2ASEL */ +#if defined(RCC_CDCCIP1R_SAI2BSEL) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI2B; +#endif /* RCC_CDCCIP1R_SAI2BSEL */ +#if defined(SAI3) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI23; +#endif /* SAI3 */ +#if defined(SAI4) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI4A; + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_SAI4B; +#endif /* SAI4 */ +#if defined(DFSDM2_BASE) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_DFSDM2; +#endif /* DFSDM2 */ +#if defined(QUADSPI) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_QSPI; +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_OSPI; +#endif /* OCTOSPI1 || OCTOSPI2 */ +#if defined(HRTIM1) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_HRTIM1; +#endif /* HRTIM1 */ +#if defined(LTDC) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_LTDC; +#endif /* LTDC */ +#if defined(DSI) + PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_DSI; +#endif /* DSI */ + + /* Get the PLL3 Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLL3.PLL3M = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM3) >> RCC_PLLCKSELR_DIVM3_Pos); + PeriphClkInit->PLL3.PLL3N = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_N3) >> RCC_PLL3DIVR_N3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3R = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_R3) >> RCC_PLL3DIVR_R3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3P = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_P3) >> RCC_PLL3DIVR_P3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3Q = (uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_Q3) >> RCC_PLL3DIVR_Q3_Pos) + 1U; + PeriphClkInit->PLL3.PLL3RGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL3RGE) >> RCC_PLLCFGR_PLL3RGE_Pos); + PeriphClkInit->PLL3.PLL3VCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL3VCOSEL) >> RCC_PLLCFGR_PLL3VCOSEL_Pos); + + /* Get the PLL2 Clock configuration -----------------------------------------------*/ + PeriphClkInit->PLL2.PLL2M = (uint32_t)((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM2) >> RCC_PLLCKSELR_DIVM2_Pos); + PeriphClkInit->PLL2.PLL2N = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_N2) >> RCC_PLL2DIVR_N2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2R = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_R2) >> RCC_PLL2DIVR_R2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2P = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_P2) >> RCC_PLL2DIVR_P2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2Q = (uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_Q2) >> RCC_PLL2DIVR_Q2_Pos) + 1U; + PeriphClkInit->PLL2.PLL2RGE = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL2RGE) >> RCC_PLLCFGR_PLL2RGE_Pos); + PeriphClkInit->PLL2.PLL2VCOSEL = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLL2VCOSEL) >> RCC_PLLCFGR_PLL2VCOSEL_Pos); + + /* Get the USART1 configuration --------------------------------------------*/ + PeriphClkInit->Usart16ClockSelection = __HAL_RCC_GET_USART16_SOURCE(); + /* Get the USART2/3/4/5/7/8 clock source -----------------------------------*/ + PeriphClkInit->Usart234578ClockSelection = __HAL_RCC_GET_USART234578_SOURCE(); + /* Get the LPUART1 clock source --------------------------------------------*/ + PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); +#if defined(I2C5) + /* Get the I2C1/2/3/5 clock source -----------------------------------------*/ + PeriphClkInit->I2c1235ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#else + /* Get the I2C1/2/3 clock source -------------------------------------------*/ + PeriphClkInit->I2c123ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); +#endif /*I2C5*/ + /* Get the LPTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); + /* Get the LPTIM2 clock source ---------------------------------------------*/ + PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); + /* Get the LPTIM3/4/5 clock source -----------------------------------------*/ + PeriphClkInit->Lptim345ClockSelection = __HAL_RCC_GET_LPTIM345_SOURCE(); + /* Get the SAI1 clock source -----------------------------------------------*/ + PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); +#if defined(SAI3) + /* Get the SAI2/3 clock source ---------------------------------------------*/ + PeriphClkInit->Sai23ClockSelection = __HAL_RCC_GET_SAI23_SOURCE(); +#endif /*SAI3*/ +#if defined(RCC_CDCCIP1R_SAI2ASEL_0) + /* Get the SAI2A clock source ---------------------------------------------*/ + PeriphClkInit->Sai2AClockSelection = __HAL_RCC_GET_SAI2A_SOURCE(); +#endif /*SAI2A*/ +#if defined(RCC_CDCCIP1R_SAI2BSEL_0) + /* Get the SAI2B clock source ---------------------------------------------*/ + PeriphClkInit->Sai2BClockSelection = __HAL_RCC_GET_SAI2B_SOURCE(); +#endif /*SAI2B*/ +#if defined(SAI4) + /* Get the SAI4A clock source ----------------------------------------------*/ + PeriphClkInit->Sai4AClockSelection = __HAL_RCC_GET_SAI4A_SOURCE(); + /* Get the SAI4B clock source ----------------------------------------------*/ + PeriphClkInit->Sai4BClockSelection = __HAL_RCC_GET_SAI4B_SOURCE(); +#endif /*SAI4*/ + /* Get the RTC clock source ------------------------------------------------*/ + PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); + /* Get the USB clock source ------------------------------------------------*/ + PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); + /* Get the SDMMC clock source ----------------------------------------------*/ + PeriphClkInit->SdmmcClockSelection = __HAL_RCC_GET_SDMMC_SOURCE(); + /* Get the RNG clock source ------------------------------------------------*/ + PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); +#if defined(HRTIM1) + /* Get the HRTIM1 clock source ---------------------------------------------*/ + PeriphClkInit->Hrtim1ClockSelection = __HAL_RCC_GET_HRTIM1_SOURCE(); +#endif /* HRTIM1 */ + /* Get the ADC clock source ------------------------------------------------*/ + PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); + /* Get the SWPMI1 clock source ---------------------------------------------*/ + PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); + /* Get the DFSDM1 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); +#if defined(DFSDM2_BASE) + /* Get the DFSDM2 clock source ---------------------------------------------*/ + PeriphClkInit->Dfsdm2ClockSelection = __HAL_RCC_GET_DFSDM2_SOURCE(); +#endif /* DFSDM2 */ + /* Get the SPDIFRX clock source --------------------------------------------*/ + PeriphClkInit->SpdifrxClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE(); + /* Get the SPI1/2/3 clock source -------------------------------------------*/ + PeriphClkInit->Spi123ClockSelection = __HAL_RCC_GET_SPI123_SOURCE(); + /* Get the SPI4/5 clock source ---------------------------------------------*/ + PeriphClkInit->Spi45ClockSelection = __HAL_RCC_GET_SPI45_SOURCE(); + /* Get the SPI6 clock source -----------------------------------------------*/ + PeriphClkInit->Spi6ClockSelection = __HAL_RCC_GET_SPI6_SOURCE(); + /* Get the FDCAN clock source ----------------------------------------------*/ + PeriphClkInit->FdcanClockSelection = __HAL_RCC_GET_FDCAN_SOURCE(); + /* Get the CEC clock source ------------------------------------------------*/ + PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE(); + /* Get the FMC clock source ------------------------------------------------*/ + PeriphClkInit->FmcClockSelection = __HAL_RCC_GET_FMC_SOURCE(); +#if defined(QUADSPI) + /* Get the QSPI clock source -----------------------------------------------*/ + PeriphClkInit->QspiClockSelection = __HAL_RCC_GET_QSPI_SOURCE(); +#endif /* QUADSPI */ +#if defined(OCTOSPI1) || defined(OCTOSPI2) + /* Get the OSPI clock source -----------------------------------------------*/ + PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); +#endif /* OCTOSPI1 || OCTOSPI2 */ + +#if defined(DSI) + /* Get the DSI clock source ------------------------------------------------*/ + PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); +#endif /*DSI*/ + + /* Get the CKPER clock source ----------------------------------------------*/ + PeriphClkInit->CkperClockSelection = __HAL_RCC_GET_CLKP_SOURCE(); + + /* Get the TIM Prescaler configuration -------------------------------------*/ + if ((RCC->CFGR & RCC_CFGR_TIMPRE) == 0U) + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED; + } + else + { + PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED; + } +} + +/** + * @brief Return the peripheral clock frequency for a given peripheral(SAI..) + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk: Peripheral clock identifier + * This parameter can be one of the following values: + * @arg RCC_PERIPHCLK_SAI1 : SAI1 peripheral clock + * @arg RCC_PERIPHCLK_SAI23 : SAI2/3 peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI2A : SAI2A peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI2B : SAI2B peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI4A : SAI4A peripheral clock (*) + * @arg RCC_PERIPHCLK_SAI4B : SAI4B peripheral clock (*) + * @arg RCC_PERIPHCLK_SPI123: SPI1/2/3 peripheral clock + * @arg RCC_PERIPHCLK_ADC : ADC peripheral clock + * @arg RCC_PERIPHCLK_SDMMC : SDMMC peripheral clock + * @arg RCC_PERIPHCLK_SPI6 : SPI6 peripheral clock + * @retval Frequency in KHz + * + * (*) : Available on some STM32H7 lines only. + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint64_t PeriphClk) +{ + PLL1_ClocksTypeDef pll1_clocks; + PLL2_ClocksTypeDef pll2_clocks; + PLL3_ClocksTypeDef pll3_clocks; + + /* This variable is used to store the clock frequency (value in Hz) */ + uint32_t frequency; + /* This variable is used to store the SAI and CKP clock source */ + uint32_t saiclocksource; + uint32_t ckpclocksource; + uint32_t srcclk; + + if (PeriphClk == RCC_PERIPHCLK_SAI1) + { + + saiclocksource = __HAL_RCC_GET_SAI1_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI1CLKSOURCE_PLL: /* PLL1 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI1CLKSOURCE_PLL2: /* PLL2 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI1CLKSOURCE_PLL3: /* PLL3 is the clock source for SAI1 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI1CLKSOURCE_CLKP: /* CKPER is the clock source for SAI1*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI1CLKSOURCE_PIN): /* External clock is the clock source for SAI1 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } + +#if defined(SAI3) + else if (PeriphClk == RCC_PERIPHCLK_SAI23) + { + + saiclocksource = __HAL_RCC_GET_SAI23_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI23CLKSOURCE_PLL: /* PLL1 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI23CLKSOURCE_PLL2: /* PLL2 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI23CLKSOURCE_PLL3: /* PLL3 is the clock source for SAI2/3 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI23CLKSOURCE_CLKP: /* CKPER is the clock source for SAI2/3 */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI23CLKSOURCE_PIN): /* External clock is the clock source for SAI2/3 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } +#endif /* SAI3 */ + +#if defined(RCC_CDCCIP1R_SAI2ASEL) + + else if (PeriphClk == RCC_PERIPHCLK_SAI2A) + { + saiclocksource = __HAL_RCC_GET_SAI2A_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI2ACLKSOURCE_PLL: /* PLL1 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI2ACLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2ACLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI2A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2ACLKSOURCE_CLKP: /* CKPER is the clock source for SAI2A */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SAI2ACLKSOURCE_PIN): /* External clock is the clock source for SAI2A */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + + } +#endif + +#if defined(RCC_CDCCIP1R_SAI2BSEL_0) + else if (PeriphClk == RCC_PERIPHCLK_SAI2B) + { + + saiclocksource = __HAL_RCC_GET_SAI2B_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI2BCLKSOURCE_PLL: /* PLL1 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI2BCLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2BCLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI2B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI2BCLKSOURCE_CLKP: /* CKPER is the clock source for SAI2B*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + break; + } + + case (RCC_SAI2BCLKSOURCE_PIN): /* External clock is the clock source for SAI2B */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } +#endif + +#if defined(SAI4) + else if (PeriphClk == RCC_PERIPHCLK_SAI4A) + { + + saiclocksource = __HAL_RCC_GET_SAI4A_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI4ACLKSOURCE_PLL: /* PLL1 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI4ACLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4ACLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI4A */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4ACLKSOURCE_CLKP: /* CKPER is the clock source for SAI4A*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case RCC_SAI4ACLKSOURCE_PIN: /* External clock is the clock source for SAI4A */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } + + else if (PeriphClk == RCC_PERIPHCLK_SAI4B) + { + + saiclocksource = __HAL_RCC_GET_SAI4B_SOURCE(); + + switch (saiclocksource) + { + case RCC_SAI4BCLKSOURCE_PLL: /* PLL1 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SAI4BCLKSOURCE_PLL2: /* PLLI2 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4BCLKSOURCE_PLL3: /* PLLI3 is the clock source for SAI4B */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SAI4BCLKSOURCE_CLKP: /* CKPER is the clock source for SAI4B*/ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case RCC_SAI4BCLKSOURCE_PIN: /* External clock is the clock source for SAI4B */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + + default : + { + frequency = 0; + break; + } + } + } +#endif /*SAI4*/ + else if (PeriphClk == RCC_PERIPHCLK_SPI123) + { + /* Get SPI1/2/3 clock source */ + srcclk = __HAL_RCC_GET_SPI123_SOURCE(); + + switch (srcclk) + { + case RCC_SPI123CLKSOURCE_PLL: /* PLL1 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI123CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SPI123CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI123 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_SPI123CLKSOURCE_CLKP: /* CKPER is the clock source for SPI123 */ + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + case (RCC_SPI123CLKSOURCE_PIN): /* External clock is the clock source for I2S */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SPI45) + { + /* Get SPI45 clock source */ + srcclk = __HAL_RCC_GET_SPI45_SOURCE(); + switch (srcclk) + { + case RCC_SPI45CLKSOURCE_PCLK2: /* CD/D2 PCLK2 is the clock source for SPI4/5 */ + { + frequency = HAL_RCC_GetPCLK1Freq(); + break; + } + case RCC_SPI45CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_HSI: /* HSI is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_CSI: /* CSI is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) + { + frequency = CSI_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI45CLKSOURCE_HSE: /* HSE is the clock source for SPI45 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_ADC) + { + /* Get ADC clock source */ + srcclk = __HAL_RCC_GET_ADC_SOURCE(); + + switch (srcclk) + { + case RCC_ADCCLKSOURCE_PLL2: + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_P_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_ADCCLKSOURCE_PLL3: + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_R_Frequency; + } + else + { + frequency = 0; + } + break; + } + + case RCC_ADCCLKSOURCE_CLKP: + { + + ckpclocksource = __HAL_RCC_GET_CLKP_SOURCE(); + + if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSI)) + { + /* In Case the CKPER Source is HSI */ + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) && (ckpclocksource == RCC_CLKPSOURCE_CSI)) + { + /* In Case the CKPER Source is CSI */ + frequency = CSI_VALUE; + } + + else if ((HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) && (ckpclocksource == RCC_CLKPSOURCE_HSE)) + { + /* In Case the CKPER Source is HSE */ + frequency = HSE_VALUE; + } + + else + { + /* In Case the CKPER is disabled*/ + frequency = 0; + } + + break; + } + + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SDMMC) + { + /* Get SDMMC clock source */ + srcclk = __HAL_RCC_GET_SDMMC_SOURCE(); + + switch (srcclk) + { + case RCC_SDMMCCLKSOURCE_PLL: /* PLL1 is the clock source for SDMMC */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SDMMCCLKSOURCE_PLL2: /* PLL2 is the clock source for SDMMC */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_R_Frequency; + } + else + { + frequency = 0; + } + break; + } + + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_SPI6) + { + /* Get SPI6 clock source */ + srcclk = __HAL_RCC_GET_SPI6_SOURCE(); + + switch (srcclk) + { + case RCC_SPI6CLKSOURCE_D3PCLK1: /* D3PCLK1 (PCLK4) is the clock source for SPI6 */ + { + frequency = HAL_RCCEx_GetD3PCLK1Freq(); + break; + } + case RCC_SPI6CLKSOURCE_PLL2: /* PLL2 is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_PLL3: /* PLL3 is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3RDY)) + { + HAL_RCCEx_GetPLL3ClockFreq(&pll3_clocks); + frequency = pll3_clocks.PLL3_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_HSI: /* HSI is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) + { + frequency = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_CSI: /* CSI is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_CSIRDY)) + { + frequency = CSI_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_SPI6CLKSOURCE_HSE: /* HSE is the clock source for SPI6 */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } +#if defined(RCC_SPI6CLKSOURCE_PIN) + case RCC_SPI6CLKSOURCE_PIN: /* External clock is the clock source for SPI6 */ + { + frequency = EXTERNAL_CLOCK_VALUE; + break; + } +#endif /* RCC_SPI6CLKSOURCE_PIN */ + default : + { + frequency = 0; + break; + } + } + } + else if (PeriphClk == RCC_PERIPHCLK_FDCAN) + { + /* Get FDCAN clock source */ + srcclk = __HAL_RCC_GET_FDCAN_SOURCE(); + + switch (srcclk) + { + case RCC_FDCANCLKSOURCE_HSE: /* HSE is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) + { + frequency = HSE_VALUE; + } + else + { + frequency = 0; + } + break; + } + case RCC_FDCANCLKSOURCE_PLL: /* PLL is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL1RDY)) + { + HAL_RCCEx_GetPLL1ClockFreq(&pll1_clocks); + frequency = pll1_clocks.PLL1_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + case RCC_FDCANCLKSOURCE_PLL2: /* PLL2 is the clock source for FDCAN */ + { + if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL2RDY)) + { + HAL_RCCEx_GetPLL2ClockFreq(&pll2_clocks); + frequency = pll2_clocks.PLL2_Q_Frequency; + } + else + { + frequency = 0; + } + break; + } + default : + { + frequency = 0; + break; + } + } + } + else + { + frequency = 0; + } + + return frequency; +} + + +/** + * @brief Returns the D1PCLK1 frequency + * @note Each time D1PCLK1 changes, this function must be called to update the + * right D1PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval D1PCLK1 frequency + */ +uint32_t HAL_RCCEx_GetD1PCLK1Freq(void) +{ +#if defined(RCC_D1CFGR_D1PPRE) + /* Get HCLK source and Compute D1PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1PPRE) >> RCC_D1CFGR_D1PPRE_Pos] & 0x1FU)); +#else + /* Get HCLK source and Compute D1PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDPPRE) >> RCC_CDCFGR1_CDPPRE_Pos] & 0x1FU)); +#endif +} + +/** + * @brief Returns the D3PCLK1 frequency + * @note Each time D3PCLK1 changes, this function must be called to update the + * right D3PCLK1 value. Otherwise, any configuration based on this function will be incorrect. + * @retval D3PCLK1 frequency + */ +uint32_t HAL_RCCEx_GetD3PCLK1Freq(void) +{ +#if defined(RCC_D3CFGR_D3PPRE) + /* Get HCLK source and Compute D3PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->D3CFGR & RCC_D3CFGR_D3PPRE) >> RCC_D3CFGR_D3PPRE_Pos] & 0x1FU)); +#else + /* Get HCLK source and Compute D3PCLK1 frequency ---------------------------*/ + return (HAL_RCC_GetHCLKFreq() >> (D1CorePrescTable[(RCC->SRDCFGR & RCC_SRDCFGR_SRDPPRE) >> RCC_SRDCFGR_SRDPPRE_Pos] & 0x1FU)); +#endif +} +/** +* @brief Returns the PLL2 clock frequencies :PLL2_P_Frequency,PLL2_R_Frequency and PLL2_Q_Frequency + * @note The PLL2 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL2CLK changes, this function must be called to update the + * right PLL2CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL2_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL2ClockFreq(PLL2_ClocksTypeDef *PLL2_Clocks) +{ + uint32_t pllsource, pll2m, pll2fracen, hsivalue; + float_t fracn2, pll2vco; + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLL2M) * PLL2N + PLL2xCLK = PLL2_VCO / PLL2x + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll2m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM2) >> 12); + pll2fracen = (RCC->PLLCFGR & RCC_PLLCFGR_PLL2FRACEN) >> RCC_PLLCFGR_PLL2FRACEN_Pos; + fracn2 = (float_t)(uint32_t)(pll2fracen * ((RCC->PLL2FRACR & RCC_PLL2FRACR_FRACN2) >> 3)); + + if (pll2m != 0U) + { + switch (pllsource) + { + + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll2vco = ((float_t)hsivalue / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + } + else + { + pll2vco = ((float_t)HSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + } + break; + + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll2vco = ((float_t)CSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll2vco = ((float_t)HSE_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll2vco = ((float_t)CSI_VALUE / (float_t)pll2m) * ((float_t)(uint32_t)(RCC->PLL2DIVR & RCC_PLL2DIVR_N2) + (fracn2 / (float_t)0x2000) + (float_t)1); + break; + } + PLL2_Clocks->PLL2_P_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_P2) >> 9) + (float_t)1)) ; + PLL2_Clocks->PLL2_Q_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_Q2) >> 16) + (float_t)1)) ; + PLL2_Clocks->PLL2_R_Frequency = (uint32_t)(float_t)(pll2vco / ((float_t)(uint32_t)((RCC->PLL2DIVR & RCC_PLL2DIVR_R2) >> 24) + (float_t)1)) ; + } + else + { + PLL2_Clocks->PLL2_P_Frequency = 0U; + PLL2_Clocks->PLL2_Q_Frequency = 0U; + PLL2_Clocks->PLL2_R_Frequency = 0U; + } +} + +/** +* @brief Returns the PLL3 clock frequencies :PLL3_P_Frequency,PLL3_R_Frequency and PLL3_Q_Frequency + * @note The PLL3 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL3CLK changes, this function must be called to update the + * right PLL3CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL3_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL3ClockFreq(PLL3_ClocksTypeDef *PLL3_Clocks) +{ + uint32_t pllsource, pll3m, pll3fracen, hsivalue; + float_t fracn3, pll3vco; + + /* PLL3_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLL3M) * PLL3N + PLL3xCLK = PLL3_VCO / PLLxR + */ + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll3m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM3) >> 20) ; + pll3fracen = (RCC->PLLCFGR & RCC_PLLCFGR_PLL3FRACEN) >> RCC_PLLCFGR_PLL3FRACEN_Pos; + fracn3 = (float_t)(uint32_t)(pll3fracen * ((RCC->PLL3FRACR & RCC_PLL3FRACR_FRACN3) >> 3)); + + if (pll3m != 0U) + { + switch (pllsource) + { + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll3vco = ((float_t)hsivalue / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + } + else + { + pll3vco = ((float_t)HSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + } + break; + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll3vco = ((float_t)CSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll3vco = ((float_t)HSE_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll3vco = ((float_t)CSI_VALUE / (float_t)pll3m) * ((float_t)(uint32_t)(RCC->PLL3DIVR & RCC_PLL3DIVR_N3) + (fracn3 / (float_t)0x2000) + (float_t)1); + break; + } + PLL3_Clocks->PLL3_P_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_P3) >> 9) + (float_t)1)) ; + PLL3_Clocks->PLL3_Q_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_Q3) >> 16) + (float_t)1)) ; + PLL3_Clocks->PLL3_R_Frequency = (uint32_t)(float_t)(pll3vco / ((float_t)(uint32_t)((RCC->PLL3DIVR & RCC_PLL3DIVR_R3) >> 24) + (float_t)1)) ; + } + else + { + PLL3_Clocks->PLL3_P_Frequency = 0U; + PLL3_Clocks->PLL3_Q_Frequency = 0U; + PLL3_Clocks->PLL3_R_Frequency = 0U; + } + +} + +/** +* @brief Returns the PLL1 clock frequencies :PLL1_P_Frequency,PLL1_R_Frequency and PLL1_Q_Frequency + * @note The PLL1 clock frequencies computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * @note The function returns values based on HSE_VALUE, HSI_VALUE or CSI Value multiplied/divided by the PLL factors. + * @note This function can be used by the user application to compute the + * baud-rate for the communication peripherals or configure other parameters. + * + * @note Each time PLL1CLK changes, this function must be called to update the + * right PLL1CLK value. Otherwise, any configuration based on this function will be incorrect. + * @param PLL1_Clocks structure. + * @retval None + */ +void HAL_RCCEx_GetPLL1ClockFreq(PLL1_ClocksTypeDef *PLL1_Clocks) +{ + uint32_t pllsource, pll1m, pll1fracen, hsivalue; + float_t fracn1, pll1vco; + + pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC); + pll1m = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1) >> 4); + pll1fracen = RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN; + fracn1 = (float_t)(uint32_t)(pll1fracen * ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1) >> 3)); + + if (pll1m != 0U) + { + switch (pllsource) + { + + case RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */ + + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIDIV) != 0U) + { + hsivalue = (HSI_VALUE >> (__HAL_RCC_GET_HSI_DIVIDER() >> 3)); + pll1vco = ((float_t)hsivalue / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + else + { + pll1vco = ((float_t)HSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + } + break; + case RCC_PLLSOURCE_CSI: /* CSI used as PLL clock source */ + pll1vco = ((float_t)CSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + case RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */ + pll1vco = ((float_t)HSE_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + + default: + pll1vco = ((float_t)HSI_VALUE / (float_t)pll1m) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1 / (float_t)0x2000) + (float_t)1); + break; + } + + PLL1_Clocks->PLL1_P_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >> 9) + (float_t)1)) ; + PLL1_Clocks->PLL1_Q_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_Q1) >> 16) + (float_t)1)) ; + PLL1_Clocks->PLL1_R_Frequency = (uint32_t)(float_t)(pll1vco / ((float_t)(uint32_t)((RCC->PLL1DIVR & RCC_PLL1DIVR_R1) >> 24) + (float_t)1)) ; + } + else + { + PLL1_Clocks->PLL1_P_Frequency = 0U; + PLL1_Clocks->PLL1_Q_Frequency = 0U; + PLL1_Clocks->PLL1_R_Frequency = 0U; + } + +} + +/** + * @brief Returns the main System frequency + * @note Each time System clock changes, this function must be called to update the + * right core clock value. Otherwise, any configuration based on this function will be incorrect. + * @note The SystemCoreClock CMSIS variable is used to store System current Core Clock Frequency + * and updated within this function + * @retval HCLK frequency + */ +uint32_t HAL_RCCEx_GetD1SysClockFreq(void) +{ + uint32_t common_system_clock; + +#if defined(RCC_D1CFGR_D1CPRE) + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE) >> RCC_D1CFGR_D1CPRE_Pos] & 0x1FU); +#else + common_system_clock = HAL_RCC_GetSysClockFreq() >> (D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_CDCPRE) >> RCC_CDCFGR1_CDCPRE_Pos] & 0x1FU); +#endif + + /* Update the SystemD2Clock global variable */ +#if defined(RCC_D1CFGR_HPRE) + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE) >> RCC_D1CFGR_HPRE_Pos]) & 0x1FU)); +#else + SystemD2Clock = (common_system_clock >> ((D1CorePrescTable[(RCC->CDCFGR1 & RCC_CDCFGR1_HPRE) >> RCC_CDCFGR1_HPRE_Pos]) & 0x1FU)); +#endif + +#if defined(DUAL_CORE) && defined(CORE_CM4) + SystemCoreClock = SystemD2Clock; +#else + SystemCoreClock = common_system_clock; +#endif /* DUAL_CORE && CORE_CM4 */ + + return common_system_clock; +} +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended System Control functions + * @brief Extended Peripheral Control functions + * @{ + */ +/** + * @brief Enables the LSE Clock Security System. + * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled + * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC + * clock with HAL_RCCEx_PeriphCLKConfig(). + * @retval None + */ +void HAL_RCCEx_EnableLSECSS(void) +{ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; +} + +/** + * @brief Disables the LSE Clock Security System. + * @note LSE Clock Security System can only be disabled after a LSE failure detection. + * @retval None + */ +void HAL_RCCEx_DisableLSECSS(void) +{ + CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + /* Disable LSE CSS IT if any */ + __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); +} + +/** + * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. + * @note LSE Clock Security System Interrupt is mapped on EXTI line 18 + * @retval None + */ +void HAL_RCCEx_EnableLSECSS_IT(void) +{ + /* Enable LSE CSS */ + SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; + + /* Enable LSE CSS IT */ + __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); + + /* Enable IT on EXTI Line 18 */ +#if defined(DUAL_CORE) && defined(CORE_CM4) + __HAL_RCC_C2_LSECSS_EXTI_ENABLE_IT(); +#else + __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); +#endif /* DUAL_CORE && CORE_CM4 */ + __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); +} + +/** + * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock + * @param WakeUpClk: Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_WAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_WAKEUPCLOCK_HSI: HSI oscillator selection + * @note This function shall not be called after the Clock Security System on HSE has been + * enabled. + * @retval None + */ +void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +/** + * @brief Configure the oscillator Kernel clock source for wakeup from Stop + * @param WakeUpClk: Kernel Wakeup clock + * This parameter can be one of the following values: + * @arg RCC_STOP_KERWAKEUPCLOCK_CSI: CSI oscillator selection + * @arg RCC_STOP_KERWAKEUPCLOCK_HSI: HSI oscillator selection + * @retval None + */ +void HAL_RCCEx_KerWakeUpStopCLKConfig(uint32_t WakeUpClk) +{ + assert_param(IS_RCC_STOP_KERWAKEUPCLOCK(WakeUpClk)); + + __HAL_RCC_KERWAKEUPSTOP_CLK_CONFIG(WakeUpClk); +} + +#if defined(DUAL_CORE) +/** + * @brief Enable COREx boot independently of CMx_B option byte value + * @param RCC_BootCx: Boot Core to be enabled + * This parameter can be one of the following values: + * @arg RCC_BOOT_C1: CM7 core selection + * @arg RCC_BOOT_C2: CM4 core selection + * @note This bit can be set by software but is cleared by hardware after a system reset or STANDBY + * + * @retval None + */ +void HAL_RCCEx_EnableBootCore(uint32_t RCC_BootCx) +{ + assert_param(IS_RCC_BOOT_CORE(RCC_BootCx)); + SET_BIT(RCC->GCR, RCC_BootCx) ; +} + +#endif /*DUAL_CORE*/ + +#if defined(DUAL_CORE) +/** + * @brief Configure WWDGx to generate a system reset not only CPUx reset(default) when a time-out occurs + * @param RCC_WWDGx: WWDGx to be configured + * This parameter can be one of the following values: + * @arg RCC_WWDG1: WWDG1 generates system reset + * @arg RCC_WWDG2: WWDG2 generates system reset + * @note This bit can be set by software but is cleared by hardware during a system reset + * + * @retval None + */ +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx) +{ + assert_param(IS_RCC_SCOPE_WWDG(RCC_WWDGx)); + SET_BIT(RCC->GCR, RCC_WWDGx) ; +} + +#else +#if defined(RCC_GCR_WW1RSC) +/** + * @brief Configure WWDG1 to generate a system reset not only CPU reset(default) when a time-out occurs + * @param RCC_WWDGx: WWDGx to be configured + * This parameter can be one of the following values: + * @arg RCC_WWDG1: WWDG1 generates system reset + * @note This bit can be set by software but is cleared by hardware during a system reset + * + * @retval None + */ +void HAL_RCCEx_WWDGxSysResetConfig(uint32_t RCC_WWDGx) +{ + assert_param(IS_RCC_SCOPE_WWDG(RCC_WWDGx)); + SET_BIT(RCC->GCR, RCC_WWDGx) ; +} +#endif +#endif /*DUAL_CORE*/ + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions + * @brief Extended Clock Recovery System Control functions + * +@verbatim + =============================================================================== + ##### Extended Clock Recovery System Control functions ##### + =============================================================================== + [..] + For devices with Clock Recovery System feature (CRS), RCC Extension HAL driver can be used as follows: + + (#) In System clock config, HSI48 needs to be enabled + + (#) Enable CRS clock in IP MSP init which will use CRS functions + + (#) Call CRS functions as follows: + (##) Prepare synchronization configuration necessary for HSI48 calibration + (+++) Default values can be set for frequency Error Measurement (reload and error limit) + and also HSI48 oscillator smooth trimming. + (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate + directly reload value with target and synchronization frequencies values + (##) Call function HAL_RCCEx_CRSConfig which + (+++) Resets CRS registers to their default values. + (+++) Configures CRS registers with synchronization configuration + (+++) Enables automatic calibration and frequency error counter feature + Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the + periodic USB SOF will not be generated by the host. No SYNC signal will therefore be + provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock + precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs + should be used as SYNC signal. + + (##) A polling function is provided to wait for complete synchronization + (+++) Call function HAL_RCCEx_CRSWaitSynchronization() + (+++) According to CRS status, user can decide to adjust again the calibration or continue + application if synchronization is OK + + (#) User can retrieve information related to synchronization in calling function + HAL_RCCEx_CRSGetSynchronizationInfo() + + (#) Regarding synchronization status and synchronization information, user can try a new calibration + in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. + Note: When the SYNC event is detected during the down-counting phase (before reaching the zero value), + it means that the actual frequency is lower than the target (and so, that the TRIM value should be + incremented), while when it is detected during the up-counting phase it means that the actual frequency + is higher (and that the TRIM value should be decremented). + + (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go + through CRS Handler (CRS_IRQn/CRS_IRQHandler) + (++) Call function HAL_RCCEx_CRSConfig() + (++) Enable CRS_IRQn (thanks to NVIC functions) + (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) + (++) Implement CRS status management in the following user callbacks called from + HAL_RCCEx_CRS_IRQHandler(): + (+++) HAL_RCCEx_CRS_SyncOkCallback() + (+++) HAL_RCCEx_CRS_SyncWarnCallback() + (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() + (+++) HAL_RCCEx_CRS_ErrorCallback() + + (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). + This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) + +@endverbatim + * @{ + */ + +/** + * @brief Start automatic synchronization for polling mode + * @param pInit Pointer on RCC_CRSInitTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) +{ + uint32_t value; + + /* Check the parameters */ + assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); + assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); + assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); + assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); + assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); + assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); + + /* CONFIGURATION */ + + /* Before configuration, reset CRS registers to their default values*/ + __HAL_RCC_CRS_FORCE_RESET(); + __HAL_RCC_CRS_RELEASE_RESET(); + + /* Set the SYNCDIV[2:0] bits according to Pre-scaler value */ + /* Set the SYNCSRC[1:0] bits according to Source value */ + /* Set the SYNCSPOL bit according to Polarity value */ + if ((HAL_GetREVID() <= REV_ID_Y) && (pInit->Source == RCC_CRS_SYNC_SOURCE_USB2)) + { + /* Use Rev.Y value of USB2 */ + value = (pInit->Prescaler | RCC_CRS_SYNC_SOURCE_PIN | pInit->Polarity); + } + else + { + value = (pInit->Prescaler | pInit->Source | pInit->Polarity); + } + /* Set the RELOAD[15:0] bits according to ReloadValue value */ + value |= pInit->ReloadValue; + /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ + value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); + WRITE_REG(CRS->CFGR, value); + + /* Adjust HSI48 oscillator smooth trimming */ + /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */ + MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); + + /* START AUTOMATIC SYNCHRONIZATION*/ + + /* Enable Automatic trimming & Frequency error counter */ + SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); +} + +/** + * @brief Generate the software synchronization event + * @retval None + */ +void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) +{ + SET_BIT(CRS->CR, CRS_CR_SWSYNC); +} + +/** + * @brief Return synchronization info + * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure + * @retval None + */ +void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) +{ + /* Check the parameter */ + assert_param(pSynchroInfo != (void *)NULL); + + /* Get the reload value */ + pSynchroInfo->ReloadValue = (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); + + /* Get HSI48 oscillator smooth trimming */ + pSynchroInfo->HSI48CalibrationValue = (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); + + /* Get Frequency error capture */ + pSynchroInfo->FreqErrorCapture = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); + + /* Get Frequency error direction */ + pSynchroInfo->FreqErrorDirection = (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); +} + +/** +* @brief Wait for CRS Synchronization status. +* @param Timeout Duration of the time-out +* @note Timeout is based on the maximum time to receive a SYNC event based on synchronization +* frequency. +* @note If Time-out set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. +* @retval Combination of Synchronization status +* This parameter can be a combination of the following values: +* @arg @ref RCC_CRS_TIMEOUT +* @arg @ref RCC_CRS_SYNCOK +* @arg @ref RCC_CRS_SYNCWARN +* @arg @ref RCC_CRS_SYNCERR +* @arg @ref RCC_CRS_SYNCMISS +* @arg @ref RCC_CRS_TRIMOVF +*/ +uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) +{ + uint32_t crsstatus = RCC_CRS_NONE; + uint32_t tickstart; + + /* Get time-out */ + tickstart = HAL_GetTick(); + + /* Wait for CRS flag or time-out detection */ + do + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + crsstatus = RCC_CRS_TIMEOUT; + } + } + /* Check CRS SYNCOK flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) + { + /* CRS SYNC event OK */ + crsstatus |= RCC_CRS_SYNCOK; + + /* Clear CRS SYNC event OK bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); + } + + /* Check CRS SYNCWARN flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) + { + /* CRS SYNC warning */ + crsstatus |= RCC_CRS_SYNCWARN; + + /* Clear CRS SYNCWARN bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); + } + + /* Check CRS TRIM overflow flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_TRIMOVF; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); + } + + /* Check CRS Error flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) + { + /* CRS SYNC Error */ + crsstatus |= RCC_CRS_SYNCERR; + + /* Clear CRS Error bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); + } + + /* Check CRS SYNC Missed flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) + { + /* CRS SYNC Missed */ + crsstatus |= RCC_CRS_SYNCMISS; + + /* Clear CRS SYNC Missed bit */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); + } + + /* Check CRS Expected SYNC flag */ + if (__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) + { + /* frequency error counter reached a zero value */ + __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); + } + } + while (RCC_CRS_NONE == crsstatus); + + return crsstatus; +} + +/** + * @brief Handle the Clock Recovery System interrupt request. + * @retval None + */ +void HAL_RCCEx_CRS_IRQHandler(void) +{ + uint32_t crserror = RCC_CRS_NONE; + /* Get current IT flags and IT sources values */ + uint32_t itflags = READ_REG(CRS->ISR); + uint32_t itsources = READ_REG(CRS->CR); + + /* Check CRS SYNCOK flag */ + if (((itflags & RCC_CRS_FLAG_SYNCOK) != 0U) && ((itsources & RCC_CRS_IT_SYNCOK) != 0U)) + { + /* Clear CRS SYNC event OK flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); + + /* user callback */ + HAL_RCCEx_CRS_SyncOkCallback(); + } + /* Check CRS SYNCWARN flag */ + else if (((itflags & RCC_CRS_FLAG_SYNCWARN) != 0U) && ((itsources & RCC_CRS_IT_SYNCWARN) != 0U)) + { + /* Clear CRS SYNCWARN flag */ + WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); + + /* user callback */ + HAL_RCCEx_CRS_SyncWarnCallback(); + } + /* Check CRS Expected SYNC flag */ + else if (((itflags & RCC_CRS_FLAG_ESYNC) != 0U) && ((itsources & RCC_CRS_IT_ESYNC) != 0U)) + { + /* frequency error counter reached a zero value */ + WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); + + /* user callback */ + HAL_RCCEx_CRS_ExpectedSyncCallback(); + } + /* Check CRS Error flags */ + else + { + if (((itflags & RCC_CRS_FLAG_ERR) != 0U) && ((itsources & RCC_CRS_IT_ERR) != 0U)) + { + if ((itflags & RCC_CRS_FLAG_SYNCERR) != 0U) + { + crserror |= RCC_CRS_SYNCERR; + } + if ((itflags & RCC_CRS_FLAG_SYNCMISS) != 0U) + { + crserror |= RCC_CRS_SYNCMISS; + } + if ((itflags & RCC_CRS_FLAG_TRIMOVF) != 0U) + { + crserror |= RCC_CRS_TRIMOVF; + } + + /* Clear CRS Error flags */ + WRITE_REG(CRS->ICR, CRS_ICR_ERRC); + + /* user error callback */ + HAL_RCCEx_CRS_ErrorCallback(crserror); + } + } +} + +/** + * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncOkCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_SyncWarnCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file + */ +} + +/** + * @brief RCCEx Clock Recovery System Error interrupt callback. + * @param Error Combination of Error status. + * This parameter can be a combination of the following values: + * @arg @ref RCC_CRS_SYNCERR + * @arg @ref RCC_CRS_SYNCMISS + * @arg @ref RCC_CRS_TRIMOVF + * @retval none + */ +__weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(Error); + + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup RCCEx_Private_functions RCCEx Private Functions + * @{ + */ +/** + * @brief Configure the PLL2 VCI,VCO ranges, multiplication and division factors and enable it + * @param pll2: Pointer to an RCC_PLL2InitTypeDef structure that + * contains the configuration parameters as well as VCI, VCO clock ranges. + * @param Divider divider parameter to be updated + * @note PLL2 is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLL2_Config(RCC_PLL2InitTypeDef *pll2, uint32_t Divider) +{ + + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_RCC_PLL2M_VALUE(pll2->PLL2M)); + assert_param(IS_RCC_PLL2N_VALUE(pll2->PLL2N)); + assert_param(IS_RCC_PLL2P_VALUE(pll2->PLL2P)); + assert_param(IS_RCC_PLL2R_VALUE(pll2->PLL2R)); + assert_param(IS_RCC_PLL2Q_VALUE(pll2->PLL2Q)); + assert_param(IS_RCC_PLL2RGE_VALUE(pll2->PLL2RGE)); + assert_param(IS_RCC_PLL2VCO_VALUE(pll2->PLL2VCOSEL)); + assert_param(IS_RCC_PLLFRACN_VALUE(pll2->PLL2FRACN)); + + /* Check that PLL2 OSC clock source is already set */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_NONE) + { + return HAL_ERROR; + } + + + else + { + /* Disable PLL2. */ + __HAL_RCC_PLL2_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL is disabled */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure PLL2 multiplication and division factors. */ + __HAL_RCC_PLL2_CONFIG(pll2->PLL2M, + pll2->PLL2N, + pll2->PLL2P, + pll2->PLL2Q, + pll2->PLL2R); + + /* Select PLL2 input reference frequency range: VCI */ + __HAL_RCC_PLL2_VCIRANGE(pll2->PLL2RGE) ; + + /* Select PLL2 output frequency range : VCO */ + __HAL_RCC_PLL2_VCORANGE(pll2->PLL2VCOSEL) ; + + /* Disable PLL2FRACN . */ + __HAL_RCC_PLL2FRACN_DISABLE(); + + /* Configures PLL2 clock Fractional Part Of The Multiplication Factor */ + __HAL_RCC_PLL2FRACN_CONFIG(pll2->PLL2FRACN); + + /* Enable PLL2FRACN . */ + __HAL_RCC_PLL2FRACN_ENABLE(); + + /* Enable the PLL2 clock output */ + if (Divider == DIVIDER_P_UPDATE) + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVP); + } + else if (Divider == DIVIDER_Q_UPDATE) + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVQ); + } + else + { + __HAL_RCC_PLL2CLKOUT_ENABLE(RCC_PLL2_DIVR); + } + + /* Enable PLL2. */ + __HAL_RCC_PLL2_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL2 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL2_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + + return status; +} + + +/** + * @brief Configure the PLL3 VCI,VCO ranges, multiplication and division factors and enable it + * @param pll3: Pointer to an RCC_PLL3InitTypeDef structure that + * contains the configuration parameters as well as VCI, VCO clock ranges. + * @param Divider divider parameter to be updated + * @note PLL3 is temporary disabled to apply new parameters + * + * @retval HAL status + */ +static HAL_StatusTypeDef RCCEx_PLL3_Config(RCC_PLL3InitTypeDef *pll3, uint32_t Divider) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_RCC_PLL3M_VALUE(pll3->PLL3M)); + assert_param(IS_RCC_PLL3N_VALUE(pll3->PLL3N)); + assert_param(IS_RCC_PLL3P_VALUE(pll3->PLL3P)); + assert_param(IS_RCC_PLL3R_VALUE(pll3->PLL3R)); + assert_param(IS_RCC_PLL3Q_VALUE(pll3->PLL3Q)); + assert_param(IS_RCC_PLL3RGE_VALUE(pll3->PLL3RGE)); + assert_param(IS_RCC_PLL3VCO_VALUE(pll3->PLL3VCOSEL)); + assert_param(IS_RCC_PLLFRACN_VALUE(pll3->PLL3FRACN)); + + /* Check that PLL3 OSC clock source is already set */ + if (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_NONE) + { + return HAL_ERROR; + } + + + else + { + /* Disable PLL3. */ + __HAL_RCC_PLL3_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + /* Wait till PLL3 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL3RDY) != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL3_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the PLL3 multiplication and division factors. */ + __HAL_RCC_PLL3_CONFIG(pll3->PLL3M, + pll3->PLL3N, + pll3->PLL3P, + pll3->PLL3Q, + pll3->PLL3R); + + /* Select PLL3 input reference frequency range: VCI */ + __HAL_RCC_PLL3_VCIRANGE(pll3->PLL3RGE) ; + + /* Select PLL3 output frequency range : VCO */ + __HAL_RCC_PLL3_VCORANGE(pll3->PLL3VCOSEL) ; + + /* Disable PLL3FRACN . */ + __HAL_RCC_PLL3FRACN_DISABLE(); + + /* Configures PLL3 clock Fractional Part Of The Multiplication Factor */ + __HAL_RCC_PLL3FRACN_CONFIG(pll3->PLL3FRACN); + + /* Enable PLL3FRACN . */ + __HAL_RCC_PLL3FRACN_ENABLE(); + + /* Enable the PLL3 clock output */ + if (Divider == DIVIDER_P_UPDATE) + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVP); + } + else if (Divider == DIVIDER_Q_UPDATE) + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVQ); + } + else + { + __HAL_RCC_PLL3CLKOUT_ENABLE(RCC_PLL3_DIVR); + } + + /* Enable PLL3. */ + __HAL_RCC_PLL3_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till PLL3 is ready */ + while (__HAL_RCC_GET_FLAG(RCC_FLAG_PLL3RDY) == 0U) + { + if ((HAL_GetTick() - tickstart) > PLL3_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + } + + + return status; +} + +/** + * @brief Handle the RCC LSE Clock Security System interrupt request. + * @retval None + */ +void HAL_RCCEx_LSECSS_IRQHandler(void) +{ + /* Check RCC LSE CSSF flag */ + if (__HAL_RCC_GET_IT(RCC_IT_LSECSS)) + { + + /* Clear RCC LSE CSS pending bit */ + __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); + + /* RCC LSE Clock Security System interrupt user callback */ + HAL_RCCEx_LSECSS_Callback(); + + } +} + +/** + * @brief RCCEx LSE Clock Security System interrupt callback. + * @retval none + */ +__weak void HAL_RCCEx_LSECSS_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file + */ +} + + + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c new file mode 100644 index 0000000..eab578f --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c @@ -0,0 +1,7908 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback. + (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback. + (+) BreakCallback : TIM Break Callback. + (+) Break2Callback : TIM Break2 Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + /* Capture compare 1 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) != RESET) + { + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break2 input event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) != RESET) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->Break2Callback(htim); +#else + HAL_TIMEx_Break2Callback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if (__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) + { + if (__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) != RESET) + { + __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 5 in Output Compare */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 6 in Output Compare */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_5: + { + /* Check the parameters */ + assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); + + /* Configure the Channel 5 in PWM mode */ + TIM_OC5_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel5*/ + htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_6: + { + /* Check the parameters */ + assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); + + /* Configure the Channel 6 in PWM mode */ + TIM_OC6_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel6 */ + htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE; + htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U; + break; + } + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA stream) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_CCMR3 + * @arg TIM_DMABASE_CCR5 + * @arg TIM_DMABASE_CCR6 + * @arg TIM_DMABASE_AF1 + * @arg TIM_DMABASE_AF2 + * @arg TIM_DMABASE_TISEL + * + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_COM: TIM Commutation DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_COM: + { + /* Set the DMA commutation callbacks */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA stream) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_COM: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant + * only for timer instances supporting break input(s). + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + case TIM_CHANNEL_5: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 5 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + else + { + /* Disable the OCREF clear feature for Channel 5 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE); + } + break; + } + case TIM_CHANNEL_6: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 6 */ + SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + else + { + /* Disable the OCREF clear feature for Channel 6 */ + CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + case TIM_CLOCKSOURCE_ITR1: + case TIM_CLOCKSOURCE_ITR2: + case TIM_CLOCKSOURCE_ITR3: + case TIM_CLOCKSOURCE_ITR4: + case TIM_CLOCKSOURCE_ITR5: + case TIM_CLOCKSOURCE_ITR6: + case TIM_CLOCKSOURCE_ITR7: + case TIM_CLOCKSOURCE_ITR8: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + htim->CommutationHalfCpltCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + htim->Break2Callback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + htim->HallSensor_MspInitCallback = pCallback; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + htim->HallSensor_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID + * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_COMMUTATION_HALF_CB_ID : + /* Legacy weak Commutation half complete Callback */ + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + case HAL_TIM_BREAK2_CB_ID : + /* Legacy weak Break2 Callback */ + htim->Break2Callback = HAL_TIMEx_Break2Callback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID : + /* Legacy weak Hall Sensor Msp Init Callback */ + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + break; + + case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID : + /* Legacy weak Hall Sensor Msp DeInit Callback */ + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC2NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 4U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC2NE; + + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS2; + tmpcr2 &= ~TIM_CR2_OIS2N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 2U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 2U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) + { + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC3NP; + /* Set the Output N Polarity */ + tmpccer |= (OC_Config->OCNPolarity << 8U); + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC3NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS3; + tmpcr2 &= ~TIM_CR2_OIS3N; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 4U); + /* Set the Output N Idle state */ + tmpcr2 |= (OC_Config->OCNIdleState << 4U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS4; + + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 6U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 5 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC5E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC5M); + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC5P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 16U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS5; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 8U); + } + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR5 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 6 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, + const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Disable the output: Reset the CCxE Bit */ + TIMx->CCER &= ~TIM_CCER_CC6E; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR3; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~(TIM_CCMR3_OC6M); + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= (uint32_t)~TIM_CCER_CC6P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 20U); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Reset the Output Compare IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS6; + /* Set the Output Idle state */ + tmpcr2 |= (OC_Config->OCIdleState << 10U); + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR3 */ + TIMx->CCMR3 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR6 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + case TIM_TS_ITR1: + case TIM_TS_ITR2: + case TIM_TS_ITR3: + case TIM_TS_ITR4: + case TIM_TS_ITR5: + case TIM_TS_ITR6: + case TIM_TS_ITR7: + case TIM_TS_ITR8: + case TIM_TS_ITR9: + case TIM_TS_ITR10: + case TIM_TS_ITR11: + case TIM_TS_ITR12: + case TIM_TS_ITR13: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + tmpccer = TIMx->CCER; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + tmpccer = TIMx->CCER; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_ITR4: Internal Trigger 4 (*) + * @arg TIM_TS_ITR5: Internal Trigger 5 + * @arg TIM_TS_ITR6: Internal Trigger 6 + * @arg TIM_TS_ITR7: Internal Trigger 7 + * @arg TIM_TS_ITR8: Internal Trigger 8 (*) + * @arg TIM_TS_ITR9: Internal Trigger 9 (*) + * @arg TIM_TS_ITR10: Internal Trigger 10 (*) + * @arg TIM_TS_ITR11: Internal Trigger 11 (*) + * @arg TIM_TS_ITR12: Internal Trigger 12 (*) + * @arg TIM_TS_ITR13: Internal Trigger 13 (*) + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * + * (*) Value not defined in all devices. + * + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; + htim->Break2Callback = HAL_TIMEx_Break2Callback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c new file mode 100644 index 0000000..ad4cbee --- /dev/null +++ b/Demo_Project_H7A3/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c @@ -0,0 +1,2947 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Hall Sensor Interface Initialization + * + Time Hall Sensor Interface Start + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for + positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + initialization function of this driver: + (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the + Timer Hall Sensor Interface and the commutation event with the corresponding + Interrupt and DMA request if needed (Note that One Timer is used to interface + with the Hall sensor Interface and another Timer should be used to use + the commutation event). + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), + HAL_TIMEx_HallSensor_Start_IT(). + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/** @addtogroup STM32H7xx_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#if defined(TIM_BDTR_BKBID) +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +#endif /* TIM_BDTR_BKBID */ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions + * @brief Timer Hall Sensor functions + * +@verbatim + ============================================================================== + ##### Timer Hall Sensor functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure TIM HAL Sensor. + (+) De-initialize TIM HAL Sensor. + (+) Start the Hall Sensor Interface. + (+) Stop the Hall Sensor Interface. + (+) Start the Hall Sensor Interface and enable interrupts. + (+) Stop the Hall Sensor Interface and disable interrupts. + (+) Start the Hall Sensor Interface and enable DMA transfers. + (+) Stop the Hall Sensor Interface and disable DMA transfers. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle. + * @note When the timer instance is initialized in Hall Sensor Interface mode, + * timer channels 1 and channel 2 are reserved and cannot be used for + * other purpose. + * @param htim TIM Hall Sensor Interface handle + * @param sConfig TIM Hall Sensor configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig) +{ + TIM_OC_InitTypeDef OC_Config; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_PERIOD(htim, htim->Init.Period)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy week callbacks */ + TIM_ResetCallback(htim); + + if (htim->HallSensor_MspInitCallback == NULL) + { + htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->HallSensor_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIMEx_HallSensor_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ + TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->IC1Prescaler; + + /* Enable the Hall sensor interface (XOR function of the three inputs) */ + htim->Instance->CR2 |= TIM_CR2_TI1S; + + /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1F_ED; + + /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; + + /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ + OC_Config.OCFastMode = TIM_OCFAST_DISABLE; + OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; + OC_Config.OCMode = TIM_OCMODE_PWM2; + OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; + OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; + OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; + OC_Config.Pulse = sConfig->Commutation_Delay; + + TIM_OC2_SetConfig(htim->Instance, &OC_Config); + + /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 + register to 101 */ + htim->Instance->CR2 &= ~TIM_CR2_MMS; + htim->Instance->CR2 |= TIM_TRGO_OC2REF; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Hall Sensor interface + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->HallSensor_MspDeInitCallback == NULL) + { + htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; + } + /* DeInit the low level hardware */ + htim->HallSensor_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIMEx_HallSensor_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Hall Sensor MSP. + * @param htim TIM Hall Sensor Interface handle + * @retval None + */ +__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Hall Sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall sensor Interface. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1, 2 and 3 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the capture compare Interrupts 1 event */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in interrupt mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts event */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Set the DMA Input Capture 1 Callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA stream for Capture 1*/ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the capture compare 1 Interrupt */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Hall Sensor Interface in DMA mode. + * @param htim TIM Hall Sensor Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel 1 + (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, + TIM_CHANNEL_2 and TIM_CHANNEL_3) */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + + /* Disable the capture compare Interrupts 1 event */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. + (+) Start the Complementary Input Capture measurement. + (+) Stop the Complementary Input Capture. + (+) Start the Complementary Input Capture and enable interrupts. + (+) Stop the Complementary Input Capture and disable interrupts. + (+) Start the Complementary Input Capture and enable DMA transfers. + (+) Stop the Complementary Input Capture and disable DMA transfers. + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA stream */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Select timer input source. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR12: Internal trigger 12 selected (*) + * @arg TIM_TS_ITR13: Internal trigger 13 selected (*) + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3) || + (InputTrigger == TIM_TS_ITR12) || (InputTrigger == TIM_TS_ITR13)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR2: Internal trigger 12 selected (*) + * @arg TIM_TS_ITR3: Internal trigger 13 selected (*) + * @arg TIM_TS_NONE: No trigger is needed + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3) || + (InputTrigger == TIM_TS_ITR12) || (InputTrigger == TIM_TS_ITR13)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM); + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with DMA. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @arg TIM_TS_ITR1: Internal trigger 1 selected + * @arg TIM_TS_ITR2: Internal trigger 2 selected + * @arg TIM_TS_ITR3: Internal trigger 3 selected + * @arg TIM_TS_ITR2: Internal trigger 12 selected (*) + * @arg TIM_TS_ITR3: Internal trigger 13 selected (*) + * @arg TIM_TS_NONE: No trigger is needed + * + * (*) Value not defined in all devices. + * + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || + (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3) || + (InputTrigger == TIM_TS_ITR12) || (InputTrigger == TIM_TS_ITR13)) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation DMA Request */ + /* Set the DMA Commutation Callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt; + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + /* Enable the Commutation DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */ + if (IS_TIM_TRGO2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2)); + + /* Clear the MMS2 bits */ + tmpcr2 &= ~TIM_CR2_MMS2; + /* Select the TRGO2 source*/ + tmpcr2 |= sMasterConfig->MasterOutputTrigger2; + } + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos)); + +#if defined(TIM_BDTR_BKBID) + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Set BREAK AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + } + +#endif /* TIM_BDTR_BKBID */ + if (IS_TIM_BKIN2_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State)); + assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity)); + assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter)); + + /* Set the BREAK2 input related BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos)); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State); + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity); +#if defined(TIM_BDTR_BKBID) + + if (IS_TIM_ADVANCED_INSTANCE(htim->Instance)) + { + /* Check the parameters */ + assert_param(IS_TIM_BREAK2_AFMODE(sBreakDeadTimeConfig->Break2AFMode)); + + /* Set BREAK2 AF mode */ + MODIFY_REG(tmpbdtr, TIM_BDTR_BK2BID, sBreakDeadTimeConfig->Break2AFMode); + } +#endif /* TIM_BDTR_BKBID */ + } + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} +#if defined(TIM_BREAK_INPUT_SUPPORT) + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) + +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + } + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM1_AF1_BKINE; + bkin_enable_bitpos = TIM1_AF1_BKINE_Pos; + bkin_polarity_mask = TIM1_AF1_BKINP; + bkin_polarity_bitpos = TIM1_AF1_BKINP_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM1_AF1_BKCMP1E; + bkin_enable_bitpos = TIM1_AF1_BKCMP1E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP1P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP1P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP2: + { + bkin_enable_mask = TIM1_AF1_BKCMP2E; + bkin_enable_bitpos = TIM1_AF1_BKCMP2E_Pos; + bkin_polarity_mask = TIM1_AF1_BKCMP2P; + bkin_polarity_bitpos = TIM1_AF1_BKCMP2P_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_DFSDM1: + { + bkin_enable_mask = TIM1_AF1_BKDF1BK0E; + bkin_enable_bitpos = TIM1_AF1_BKDF1BK0E_Pos; + bkin_polarity_mask = 0U; + bkin_polarity_bitpos = 0U; + break; + } + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + } + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + case TIM_BREAKINPUT_BRK2: + { + /* Get the TIMx_AF2 register value */ + tmporx = htim->Instance->AF2; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1) + { + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + } + + /* Set TIMx_AF2 */ + htim->Instance->AF2 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} +#endif /*TIM_BREAK_INPUT_SUPPORT */ + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM1, the parameter is one of the following values: + * @arg TIM_TIM1_ETR_GPIO: TIM1_ETR is connected to GPIO + * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output + * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output + * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1 + * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2 + * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3 + * @arg TIM_TIM1_ETR_ADC3_AWD1: TIM1_ETR is connected to ADC3 AWD1 + * @arg TIM_TIM1_ETR_ADC3_AWD2: TIM1_ETR is connected to ADC3 AWD2 + * @arg TIM_TIM1_ETR_ADC3_AWD3: TIM1_ETR is connected to ADC3 AWD3 + * + * For TIM2, the parameter is one of the following values: + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO + * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output + * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output + * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE + * @arg TIM_TIM2_ETR_SAI1_FSA: TIM2_ETR is connected to SAI1 FS_A + * @arg TIM_TIM2_ETR_SAI1_FSB: TIM2_ETR is connected to SAI1 FS_B + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_ETR_GPIO: TIM3_ETR is connected to GPIO + * @arg TIM_TIM3_ETR_COMP1: TIM3_ETR is connected to COMP1 output + * + * For TIM5, the parameter is one of the following values: + * @arg TIM_TIM5_ETR_GPIO: TIM5_ETR is connected to GPIO + * @arg TIM_TIM5_ETR_SAI2_FSA: TIM5_ETR is connected to SAI2 FS_A (*) + * @arg TIM_TIM5_ETR_SAI2_FSB: TIM5_ETR is connected to SAI2 FS_B (*) + * @arg TIM_TIM5_ETR_SAI4_FSA: TIM5_ETR is connected to SAI2 FS_A (*) + * @arg TIM_TIM5_ETR_SAI4_FSB: TIM5_ETR is connected to SAI2 FS_B (*) + * + * For TIM8, the parameter is one of the following values: + * @arg TIM_TIM8_ETR_GPIO: TIM8_ETR is connected to GPIO + * @arg TIM_TIM8_ETR_COMP1: TIM8_ETR is connected to COMP1 output + * @arg TIM_TIM8_ETR_COMP2: TIM8_ETR is connected to COMP2 output + * @arg TIM_TIM8_ETR_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1 + * @arg TIM_TIM8_ETR_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2 + * @arg TIM_TIM8_ETR_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3 + * @arg TIM_TIM8_ETR_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1 + * @arg TIM_TIM8_ETR_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2 + * @arg TIM_TIM8_ETR_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3 + * + * For TIM23, the parameter is one of the following values: (*) + * @arg TIM_TIM23_ETR_GPIO TIM23_ETR is connected to GPIO + * @arg TIM_TIM23_ETR_COMP1 TIM23_ETR is connected to COMP1 output + * @arg TIM_TIM23_ETR_COMP2 TIM23_ETR is connected to COMP2 output + * + * For TIM24, the parameter is one of the following values: (*) + * @arg TIM_TIM24_ETR_GPIO TIM24_ETR is connected to GPIO + * @arg TIM_TIM24_ETR_SAI4_FSA TIM24_ETR is connected to SAI4 FS_A + * @arg TIM_TIM24_ETR_SAI4_FSB TIM24_ETR is connected to SAI4 FS_B + * @arg TIM_TIM24_ETR_SAI1_FSA TIM24_ETR is connected to SAI1 FS_A + * @arg TIM_TIM24_ETR_SAI1_FSB TIM24_ETR is connected to SAI1 FS_B + * + * (*) Value not defined in all devices. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + /* Check parameters */ + assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance)); + assert_param(IS_TIM_REMAP(Remap)); + + __HAL_LOCK(htim); + + MODIFY_REG(htim->Instance->AF1, TIM1_AF1_ETRSEL_Msk, Remap); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Select the timer input source + * @param htim TIM handle. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TI1 input channel + * @arg TIM_CHANNEL_2: TI2 input channel + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @param TISelection parameter of the TIM_TISelectionStruct structure is detailed as follows: + * For TIM1, the parameter is one of the following values: + * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO + * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output + * + * For TIM2, the parameter is one of the following values: + * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output + * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output + * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output + * + * For TIM3, the parameter is one of the following values: + * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO + * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output + * @arg TIM_TIM3_TI1_COMP2: TIM3 TI1 is connected to COMP2 output + * @arg TIM_TIM3_TI1_COMP1_COMP2: TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output + * + * For TIM5, the parameter is one of the following values: + * @arg TIM_TIM5_TI1_GPIO: TIM5 TI1 is connected to GPIO + * @arg TIM_TIM5_TI1_CAN_TMP: TIM5 TI1 is connected to CAN TMP + * @arg TIM_TIM5_TI1_CAN_RTP: TIM5 TI1 is connected to CAN RTP + * + * For TIM8, the parameter is one of the following values: + * @arg TIM_TIM8_TI1_GPIO: TIM8 TI1 is connected to GPIO + * @arg TIM_TIM8_TI1_COMP2: TIM8 TI1 is connected to COMP2 output + * + * For TIM12, the parameter can have the following values: (*) + * @arg TIM_TIM12_TI1_GPIO: TIM12 TI1 is connected to GPIO + * @arg TIM_TIM12_TI1_SPDIF_FS: TIM12 TI1 is connected to SPDIF FS + * + * For TIM15, the parameter is one of the following values: + * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO + * @arg TIM_TIM15_TI1_TIM2: TIM15 TI1 is connected to TIM2 CH1 + * @arg TIM_TIM15_TI1_TIM3: TIM15 TI1 is connected to TIM3 CH1 + * @arg TIM_TIM15_TI1_TIM4: TIM15 TI1 is connected to TIM4 CH1 + * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE + * @arg TIM_TIM15_TI1_CSI: TIM15 TI1 is connected to CSI + * @arg TIM_TIM15_TI1_MCO2: TIM15 TI1 is connected to MCO2 + * @arg TIM_TIM15_TI2_GPIO: TIM15 TI2 is connected to GPIO + * @arg TIM_TIM15_TI2_TIM2: TIM15 TI2 is connected to TIM2 CH2 + * @arg TIM_TIM15_TI2_TIM3: TIM15 TI2 is connected to TIM3 CH2 + * @arg TIM_TIM15_TI2_TIM4: TIM15 TI2 is connected to TIM4 CH2 + * + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO + * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI + * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE + * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt + * + * For TIM17, the parameter can have the following values: + * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO + * @arg TIM_TIM17_TI1_SPDIF_FS: TIM17 TI1 is connected to SPDIF FS (*) + * @arg TIM_TIM17_TI1_HSE_1MHZ: TIM17 TI1 is connected to HSE 1MHz + * @arg TIM_TIM17_TI1_MCO1: TIM17 TI1 is connected to MCO1 + * + * For TIM23, the parameter can have the following values: (*) + * @arg TIM_TIM23_TI4_GPIO TIM23_TI4 is connected to GPIO + * @arg TIM_TIM23_TI4_COMP1 TIM23_TI4 is connected to COMP1 output + * @arg TIM_TIM23_TI4_COMP2 TIM23_TI4 is connected to COMP2 output + * @arg TIM_TIM23_TI4_COMP1_COMP2 TIM23_TI4 is connected to COMP2 output + * + * For TIM24, the parameter can have the following values: (*) + * @arg TIM_TIM24_TI1_GPIO TIM24_TI1 is connected to GPIO + * @arg TIM_TIM24_TI1_CAN_TMP TIM24_TI1 is connected to CAN_TMP + * @arg TIM_TIM24_TI1_CAN_RTP TIM24_TI1 is connected to CAN_RTP + * @arg TIM_TIM24_TI1_CAN_SOC TIM24_TI1 is connected to CAN_SOC + * + * (*) Value not defined in all devices. \n + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_TISelection(TIM_HandleTypeDef *htim, uint32_t TISelection, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check parameters */ + assert_param(IS_TIM_TISEL_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TISEL(TISelection)); + + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI1SEL, TISelection); + break; + case TIM_CHANNEL_2: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI2SEL, TISelection); + break; + case TIM_CHANNEL_3: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI3SEL, TISelection); + break; + case TIM_CHANNEL_4: + MODIFY_REG(htim->Instance->TISEL, TIM_TISEL_TI4SEL, TISelection); + break; + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Group channel 5 and channel 1, 2 or 3 + * @param htim TIM handle. + * @param Channels specifies the reference signal(s) the OC5REF is combined with. + * This parameter can be any combination of the following values: + * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC + * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF + * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF + * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels) +{ + /* Check parameters */ + assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_GROUPCH5(Channels)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Clear GC5Cx bit fields */ + htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1); + + /* Set GC5Cx bit fields */ + htim->Instance->CCR5 |= Channels; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} +#if defined(TIM_BDTR_BKBID) + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM); + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + + case TIM_BREAKINPUT_BRK2: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2BID) == TIM_BDTR_BK2BID) + { + /* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} +#endif /* TIM_BDTR_BKBID */ + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Hall commutation changed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} +/** + * @brief Hall commutation changed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Break2 detection callback in non blocking mode + * @param htim: TIM handle + * @retval None + */ +__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_TIMEx_Break2Callback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Hall Sensor interface handle state. + * @param htim TIM Hall Sensor handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Commutation callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Commutation half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationHalfCpltCallback(htim); +#else + HAL_TIMEx_CommutHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/Demo_Project_H7A3/STM32H7A3ZITXQ_FLASH.ld b/Demo_Project_H7A3/STM32H7A3ZITXQ_FLASH.ld new file mode 100644 index 0000000..95db3bb --- /dev/null +++ b/Demo_Project_H7A3/STM32H7A3ZITXQ_FLASH.ld @@ -0,0 +1,175 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32H7 series +** 2048Kbytes FLASH and 1376Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +**************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K + DTCMRAM1 (xrw) : ORIGIN = 0x20000000, LENGTH = 64K + DTCMRAM2 (xrw) : ORIGIN = 0x20010000, LENGTH = 64K + RAM (xrw) : ORIGIN = 0x24000000, LENGTH = 1024K + RAM_CD (xrw) : ORIGIN = 0x30000000, LENGTH = 128K + RAM_SRD (xrw) : ORIGIN = 0x38000000, LENGTH = 32K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/Demo_Project_H7A3/STM32H7A3ZITXQ_RAM.ld b/Demo_Project_H7A3/STM32H7A3ZITXQ_RAM.ld new file mode 100644 index 0000000..cdceed0 --- /dev/null +++ b/Demo_Project_H7A3/STM32H7A3ZITXQ_RAM.ld @@ -0,0 +1,174 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld (debug in RAM dedicated) +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32H7 series +** 1024Kbytes RAM_EXEC and 352Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +**************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM_EXEC) + LENGTH(RAM_EXEC); /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K + RAM_EXEC (xrw) : ORIGIN = 0x24000000, LENGTH = 1024K + DTCMRAM1 (xrw) : ORIGIN = 0x20000000, LENGTH = 64K + DTCMRAM2 (xrw) : ORIGIN = 0x20010000, LENGTH = 64K + RAM_CD (xrw) : ORIGIN = 0x30000000, LENGTH = 128K + RAM_SRD (xrw) : ORIGIN = 0x38000000, LENGTH = 32K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into RAM_EXEC */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >RAM_EXEC + + /* The program code and other data goes into RAM_EXEC */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >RAM_EXEC + + /* Constant data goes into RAM_EXEC */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >RAM_EXEC + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >RAM_EXEC + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >RAM_EXEC + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >RAM_EXEC + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >RAM_EXEC + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >RAM_EXEC + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM_EXEC + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM_EXEC + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM_EXEC + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} From 2048558170e5206d478325043a5a4038ec9eb481 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 6 Jan 2023 15:57:24 +0100 Subject: [PATCH 02/49] disabled cubeMX backup --- Demo_Project_H7A3/Custom_Loader.ioc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index 548744d..e622bf8 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -76,7 +76,7 @@ PG6.Mode=OCTOSPI1_Port1_NCS PG6.Signal=OCTOSPIM_P1_NCS PinOutPanel.RotationAngle=0 ProjectManager.AskForMigrate=true -ProjectManager.BackupPrevious=true +ProjectManager.BackupPrevious=false ProjectManager.CompilerOptimize=6 ProjectManager.ComputerToolchain=false ProjectManager.CoupleFile=true From def84806052c6cf8116c45ff8b18139b18080970 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 6 Jan 2023 16:11:54 +0100 Subject: [PATCH 03/49] added gitignore --- Demo_Project_H7A3/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 Demo_Project_H7A3/.gitignore diff --git a/Demo_Project_H7A3/.gitignore b/Demo_Project_H7A3/.gitignore new file mode 100644 index 0000000..e6d8d29 --- /dev/null +++ b/Demo_Project_H7A3/.gitignore @@ -0,0 +1 @@ +Debug/ \ No newline at end of file From 1a5c7aa8d21ec1aea9dab6a41a58df2b4b7be805 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 6 Jan 2023 16:14:26 +0100 Subject: [PATCH 04/49] updated cube generation --- Demo_Project_H7A3/.cproject | 1 + Demo_Project_H7A3/Core/Inc/octospi.h | 52 ++++++ Demo_Project_H7A3/Core/Src/main.c | 2 + Demo_Project_H7A3/Core/Src/octospi.c | 229 +++++++++++++++++++++++++++ Demo_Project_H7A3/Custom_Loader.ioc | 2 +- 5 files changed, 285 insertions(+), 1 deletion(-) create mode 100644 Demo_Project_H7A3/Core/Inc/octospi.h create mode 100644 Demo_Project_H7A3/Core/Src/octospi.c diff --git a/Demo_Project_H7A3/.cproject b/Demo_Project_H7A3/.cproject index bf3b7d8..d0d33b5 100644 --- a/Demo_Project_H7A3/.cproject +++ b/Demo_Project_H7A3/.cproject @@ -170,4 +170,5 @@ + \ No newline at end of file diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h new file mode 100644 index 0000000..1688e39 --- /dev/null +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -0,0 +1,52 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file octospi.h + * @brief This file contains all the function prototypes for + * the octospi.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __OCTOSPI_H__ +#define __OCTOSPI_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern OSPI_HandleTypeDef hospi1; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_OCTOSPI1_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __OCTOSPI_H__ */ + diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 1cf6332..0b0d8f9 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -18,6 +18,7 @@ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" +#include "octospi.h" #include "gpio.h" /* Private includes ----------------------------------------------------------*/ @@ -87,6 +88,7 @@ int main(void) /* Initialize all configured peripherals */ MX_GPIO_Init(); + MX_OCTOSPI1_Init(); /* USER CODE BEGIN 2 */ /* USER CODE END 2 */ diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c new file mode 100644 index 0000000..d012fba --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -0,0 +1,229 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file octospi.c + * @brief This file provides code for the configuration + * of the OCTOSPI instances. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "octospi.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +OSPI_HandleTypeDef hospi1; + +/* OCTOSPI1 init function */ +void MX_OCTOSPI1_Init(void) +{ + + /* USER CODE BEGIN OCTOSPI1_Init 0 */ + + /* USER CODE END OCTOSPI1_Init 0 */ + + OSPIM_CfgTypeDef sOspiManagerCfg = {0}; + + /* USER CODE BEGIN OCTOSPI1_Init 1 */ + + /* USER CODE END OCTOSPI1_Init 1 */ + hospi1.Instance = OCTOSPI1; + hospi1.Init.FifoThreshold = 1; + hospi1.Init.DualQuad = HAL_OSPI_DUALQUAD_DISABLE; + hospi1.Init.MemoryType = HAL_OSPI_MEMTYPE_MICRON; + hospi1.Init.DeviceSize = 32; + hospi1.Init.ChipSelectHighTime = 1; + hospi1.Init.FreeRunningClock = HAL_OSPI_FREERUNCLK_DISABLE; + hospi1.Init.ClockMode = HAL_OSPI_CLOCK_MODE_0; + hospi1.Init.WrapSize = HAL_OSPI_WRAP_NOT_SUPPORTED; + hospi1.Init.ClockPrescaler = 1; + hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_NONE; + hospi1.Init.DelayHoldQuarterCycle = HAL_OSPI_DHQC_DISABLE; + hospi1.Init.ChipSelectBoundary = 0; + hospi1.Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_BYPASSED; + hospi1.Init.MaxTran = 0; + hospi1.Init.Refresh = 0; + if (HAL_OSPI_Init(&hospi1) != HAL_OK) + { + Error_Handler(); + } + sOspiManagerCfg.ClkPort = 1; + sOspiManagerCfg.NCSPort = 1; + sOspiManagerCfg.IOLowPort = HAL_OSPIM_IOPORT_1_LOW; + sOspiManagerCfg.IOHighPort = HAL_OSPIM_IOPORT_1_HIGH; + if (HAL_OSPIM_Config(&hospi1, &sOspiManagerCfg, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN OCTOSPI1_Init 2 */ + + /* USER CODE END OCTOSPI1_Init 2 */ + +} + +void HAL_OSPI_MspInit(OSPI_HandleTypeDef* ospiHandle) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(ospiHandle->Instance==OCTOSPI1) + { + /* USER CODE BEGIN OCTOSPI1_MspInit 0 */ + + /* USER CODE END OCTOSPI1_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_OSPI; + PeriphClkInitStruct.PLL2.PLL2M = 1; + PeriphClkInitStruct.PLL2.PLL2N = 32; + PeriphClkInitStruct.PLL2.PLL2P = 45; + PeriphClkInitStruct.PLL2.PLL2Q = 125; + PeriphClkInitStruct.PLL2.PLL2R = 6; + PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_2; + PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE; + PeriphClkInitStruct.PLL2.PLL2FRACN = 0; + PeriphClkInitStruct.OspiClockSelection = RCC_OSPICLKSOURCE_PLL2; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /* OCTOSPI1 clock enable */ + __HAL_RCC_OCTOSPIM_CLK_ENABLE(); + __HAL_RCC_OSPI1_CLK_ENABLE(); + + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**OCTOSPI1 GPIO Configuration + PE2 ------> OCTOSPIM_P1_IO2 + PF6 ------> OCTOSPIM_P1_IO3 + PF8 ------> OCTOSPIM_P1_IO0 + PF9 ------> OCTOSPIM_P1_IO1 + PF10 ------> OCTOSPIM_P1_CLK + PC1 ------> OCTOSPIM_P1_IO4 + PC2_C ------> OCTOSPIM_P1_IO5 + PG6 ------> OCTOSPIM_P1_NCS + PD6 ------> OCTOSPIM_P1_IO6 + PG14 ------> OCTOSPIM_P1_IO7 + */ + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF9_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_8|GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF9_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOF, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_1; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF11_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_6; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_14; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF9_OCTOSPIM_P1; + HAL_GPIO_Init(GPIOG, &GPIO_InitStruct); + + /* USER CODE BEGIN OCTOSPI1_MspInit 1 */ + + /* USER CODE END OCTOSPI1_MspInit 1 */ + } +} + +void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef* ospiHandle) +{ + + if(ospiHandle->Instance==OCTOSPI1) + { + /* USER CODE BEGIN OCTOSPI1_MspDeInit 0 */ + + /* USER CODE END OCTOSPI1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_OCTOSPIM_CLK_DISABLE(); + __HAL_RCC_OSPI1_CLK_DISABLE(); + + /**OCTOSPI1 GPIO Configuration + PE2 ------> OCTOSPIM_P1_IO2 + PF6 ------> OCTOSPIM_P1_IO3 + PF8 ------> OCTOSPIM_P1_IO0 + PF9 ------> OCTOSPIM_P1_IO1 + PF10 ------> OCTOSPIM_P1_CLK + PC1 ------> OCTOSPIM_P1_IO4 + PC2_C ------> OCTOSPIM_P1_IO5 + PG6 ------> OCTOSPIM_P1_NCS + PD6 ------> OCTOSPIM_P1_IO6 + PG14 ------> OCTOSPIM_P1_IO7 + */ + HAL_GPIO_DeInit(GPIOE, GPIO_PIN_2); + + HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10); + + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_2); + + HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_14); + + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_6); + + /* USER CODE BEGIN OCTOSPI1_MspDeInit 1 */ + + /* USER CODE END OCTOSPI1_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index e622bf8..12caa0d 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -102,7 +102,7 @@ ProjectManager.StackSize=0x400 ProjectManager.TargetToolchain=STM32CubeIDE ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=true -ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,false-3-MX_OCTOSPI1_Init-OCTOSPI1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_OCTOSPI1_Init-OCTOSPI1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true RCC.ADCFreq_Value=2844444.4444444445 RCC.AHB12Freq_Value=280000000 RCC.AHB4Freq_Value=280000000 From e17b907076fdff90294f87118f30f946be18caec Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 6 Jan 2023 17:23:53 +0100 Subject: [PATCH 05/49] set mode to dual quad and updated defines --- Demo_Project_H7A3/Core/Inc/Dev_Inf.h | 37 ++++++++++++++++++++++++++++ Demo_Project_H7A3/Core/Inc/octospi.h | 32 ++++++++++++++++++++++++ Demo_Project_H7A3/Core/Src/Dev_Inf.c | 25 +++++++++++++++++++ Demo_Project_H7A3/Core/Src/octospi.c | 2 +- Demo_Project_H7A3/Custom_Loader.ioc | 2 +- 5 files changed, 96 insertions(+), 2 deletions(-) create mode 100644 Demo_Project_H7A3/Core/Inc/Dev_Inf.h create mode 100644 Demo_Project_H7A3/Core/Src/Dev_Inf.c diff --git a/Demo_Project_H7A3/Core/Inc/Dev_Inf.h b/Demo_Project_H7A3/Core/Inc/Dev_Inf.h new file mode 100644 index 0000000..4162816 --- /dev/null +++ b/Demo_Project_H7A3/Core/Inc/Dev_Inf.h @@ -0,0 +1,37 @@ + +#ifndef DEV_INF_H_ +#define DEV_INF_H_ + +#define MCU_FLASH 1 +#define NAND_FLASH 2 +#define NOR_FLASH 3 +#define SRAM 4 +#define PSRAM 5 +#define PC_CARD 6 +#define SPI_FLASH 7 +#define I2C_FLASH 8 +#define SDRAM 9 +#define I2C_EEPROM 10 + +#define SECTOR_NUM 10 // Max Number of Sector types + +struct DeviceSectors +{ + unsigned long SectorNum; // Number of Sectors + unsigned long SectorSize; // Sector Size in Bytes +}; + +struct StorageInfo +{ + char DeviceName[100]; // Device Name and Description + unsigned short DeviceType; // Device Type: ONCHIP, EXT8BIT, EXT16BIT, ... + unsigned long DeviceStartAddress; // Default Device Start Address + unsigned long DeviceSize; // Total Size of Device + unsigned long PageSize; // Programming Page Size + unsigned char EraseValue; // Content of Erased Memory + struct DeviceSectors sectors[SECTOR_NUM]; +}; + + + +#endif /* DEV_INF_H_ */ diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index 1688e39..6f8c857 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -36,12 +36,44 @@ extern OSPI_HandleTypeDef hospi1; /* USER CODE BEGIN Private defines */ +//MT25TL256 memory parameters +#define MEMORY_FLASH_SIZE (32UL << 20) // 256 Mib => 32MiB +#define MEMORY_BLOCK_SIZE (64UL << 10) // 512 sectors of 64KiB +#define MEMORY_SECTOR_SIZE (4UL << 10) // 8192 subsectors of 4KiB +#define MEMORY_PAGE_SIZE 256 // 131072 pages of 256B + + +//MT25TL256 commands +#define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE +#define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER +#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER +#define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE +#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib) +#define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM +//#define READ_CONFIGURATION_REG_CMD 0x15 // page 50 table 24? +//#define QUAD_READ_IO_CMD 0xEC // ? +#define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ +#define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE +#define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE +#define RESET_ENABLE_CMD 0x66 // RESET ENABLE +#define RESET_EXECUTE_CMD 0x99 // RESET MEMORY + + +#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // which one is this? sometimes 0,4,8 or 10 + /* USER CODE END Private defines */ void MX_OCTOSPI1_Init(void); /* USER CODE BEGIN Prototypes */ +uint8_t CSP_QUADSPI_Init(void); +uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress ,uint32_t EraseEndAddress); +uint8_t CSP_QSPI_WriteMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size); +uint8_t CSP_QSPI_EnableMemoryMappedMode(void); +uint8_t CSP_QSPI_Erase_Chip (void); + + /* USER CODE END Prototypes */ #ifdef __cplusplus diff --git a/Demo_Project_H7A3/Core/Src/Dev_Inf.c b/Demo_Project_H7A3/Core/Src/Dev_Inf.c new file mode 100644 index 0000000..9bbd1e1 --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/Dev_Inf.c @@ -0,0 +1,25 @@ +/* + * Dev_Inf.c + * + */ +#include "Dev_Inf.h" +#include "octospi.h" + +/* This structure contains information used by ST-LINK Utility to program and erase the device */ +#if defined (__ICCARM__) +__root struct StorageInfo const StorageInfo = { +#else +struct StorageInfo const StorageInfo = { +#endif + "QSPI_flashloader_CSP", // Device Name + version number + NOR_FLASH, // Device Type + 0x90000000, // Device Start Address + MEMORY_FLASH_SIZE, // Device Size in Bytes + MEMORY_PAGE_SIZE, // Programming Page Size + 0xFF, // Initial Content of Erased Memory + + // Specify Size and Address of Sectors (view example below) + { { (MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE), // Sector Numbers, + (uint32_t) MEMORY_SECTOR_SIZE }, //Sector Size + + { 0x00000000, 0x00000000 } } }; diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index d012fba..4dff379 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -41,7 +41,7 @@ void MX_OCTOSPI1_Init(void) /* USER CODE END OCTOSPI1_Init 1 */ hospi1.Instance = OCTOSPI1; hospi1.Init.FifoThreshold = 1; - hospi1.Init.DualQuad = HAL_OSPI_DUALQUAD_DISABLE; + hospi1.Init.DualQuad = HAL_OSPI_DUALQUAD_ENABLE; hospi1.Init.MemoryType = HAL_OSPI_MEMTYPE_MICRON; hospi1.Init.DeviceSize = 32; hospi1.Init.ChipSelectHighTime = 1; diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index 12caa0d..f92bc62 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -199,7 +199,7 @@ RCC.VCO3OutputFreq_Value=128000000 RCC.VCOInput1Freq_Value=2000000 RCC.VCOInput2Freq_Value=4000000 RCC.VCOInput3Freq_Value=2000000 -VP_OCTOSPI1_VS_octo.Mode=octo_mode +VP_OCTOSPI1_VS_octo.Mode=dual_quad_mode VP_OCTOSPI1_VS_octo.Signal=OCTOSPI1_VS_octo VP_SYS_VS_Systick.Mode=SysTick VP_SYS_VS_Systick.Signal=SYS_VS_Systick From ea8021ed49203a752dee69f6dfff35374d82eb5e Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 9 Jan 2023 13:18:01 +0100 Subject: [PATCH 06/49] intermediate commit for ioc file --- Demo_Project_H7A3/Core/Src/octospi.c | 25 ++++++++++++++++++++++++- Demo_Project_H7A3/Custom_Loader.ioc | 2 ++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 4dff379..c09f00c 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -48,7 +48,7 @@ void MX_OCTOSPI1_Init(void) hospi1.Init.FreeRunningClock = HAL_OSPI_FREERUNCLK_DISABLE; hospi1.Init.ClockMode = HAL_OSPI_CLOCK_MODE_0; hospi1.Init.WrapSize = HAL_OSPI_WRAP_NOT_SUPPORTED; - hospi1.Init.ClockPrescaler = 1; + hospi1.Init.ClockPrescaler = 4; hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_NONE; hospi1.Init.DelayHoldQuarterCycle = HAL_OSPI_DHQC_DISABLE; hospi1.Init.ChipSelectBoundary = 0; @@ -226,4 +226,27 @@ void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef* ospiHandle) /* USER CODE BEGIN 1 */ +uint8_t CSP_QUADSPI_Init(void) +{ + return HAL_ERROR; +} + +uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress ,uint32_t EraseEndAddress) +{ + return HAL_ERROR; +} + +uint8_t CSP_QSPI_WriteMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) +{ + return HAL_ERROR; +} + +uint8_t CSP_QSPI_EnableMemoryMappedMode(void) +{ + return HAL_ERROR; +} + +uint8_t CSP_QSPI_Erase_Chip (void); + + /* USER CODE END 1 */ diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index f92bc62..f9bc0be 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -50,6 +50,8 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.SysTick_IRQn=true\:14\:0\:true\:false\:true\:false\:true\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +OCTOSPI1.ClockPrescaler=4 +OCTOSPI1.IPParameters=ClockPrescaler PA13.Mode=Serial_Wire PA13.Signal=DEBUG_JTMS-SWDIO PA14.Mode=Serial_Wire From 7f3d53ba5d6c9c578af778a2c75306573e55ec63 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 9 Jan 2023 14:53:45 +0100 Subject: [PATCH 07/49] intermediate commit --- Demo_Project_H7A3/.cproject | 76 ++++--- Demo_Project_H7A3/Core/Inc/octospi.h | 7 +- Demo_Project_H7A3/Core/Src/Dev_Inf.c | 28 +-- Demo_Project_H7A3/Core/Src/Loader_Src.c | 265 ++++++++++++++++++++++++ Demo_Project_H7A3/Core/Src/octospi.c | 2 +- Demo_Project_H7A3/linker.ld | 160 ++++++++++++++ 6 files changed, 490 insertions(+), 48 deletions(-) create mode 100644 Demo_Project_H7A3/Core/Src/Loader_Src.c create mode 100644 Demo_Project_H7A3/linker.ld diff --git a/Demo_Project_H7A3/.cproject b/Demo_Project_H7A3/.cproject index d0d33b5..2a21a8b 100644 --- a/Demo_Project_H7A3/.cproject +++ b/Demo_Project_H7A3/.cproject @@ -17,13 +17,13 @@ - + + + - + @@ -96,27 +99,27 @@ - + + + - + @@ -171,4 +177,12 @@ + + + + + + + + \ No newline at end of file diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index 6f8c857..b99a400 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -32,7 +32,7 @@ extern "C" { /* USER CODE END Includes */ -extern OSPI_HandleTypeDef hospi1; + /* USER CODE BEGIN Private defines */ @@ -69,10 +69,11 @@ void MX_OCTOSPI1_Init(void); uint8_t CSP_QUADSPI_Init(void); uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress ,uint32_t EraseEndAddress); -uint8_t CSP_QSPI_WriteMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size); +uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size); uint8_t CSP_QSPI_EnableMemoryMappedMode(void); -uint8_t CSP_QSPI_Erase_Chip (void); +uint8_t CSP_QSPI_Erase_Chip(void); +extern OSPI_HandleTypeDef hospi1; /* USER CODE END Prototypes */ diff --git a/Demo_Project_H7A3/Core/Src/Dev_Inf.c b/Demo_Project_H7A3/Core/Src/Dev_Inf.c index 9bbd1e1..7bc4b71 100644 --- a/Demo_Project_H7A3/Core/Src/Dev_Inf.c +++ b/Demo_Project_H7A3/Core/Src/Dev_Inf.c @@ -7,19 +7,21 @@ /* This structure contains information used by ST-LINK Utility to program and erase the device */ #if defined (__ICCARM__) -__root struct StorageInfo const StorageInfo = { +__root struct StorageInfo const StorageInfo = +{ #else -struct StorageInfo const StorageInfo = { +struct StorageInfo const StorageInfo = +{ #endif - "QSPI_flashloader_CSP", // Device Name + version number - NOR_FLASH, // Device Type - 0x90000000, // Device Start Address - MEMORY_FLASH_SIZE, // Device Size in Bytes - MEMORY_PAGE_SIZE, // Programming Page Size - 0xFF, // Initial Content of Erased Memory + "STM32H7A3ZIT6Q_MT25TL256", // Device Name + version number + NOR_FLASH, // Device Type + 0x90000000, // Device Start Address + MEMORY_FLASH_SIZE, // Device Size in Bytes + MEMORY_PAGE_SIZE, // Programming Page Size + 0xFF, // Initial Content of Erased Memory - // Specify Size and Address of Sectors (view example below) - { { (MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE), // Sector Numbers, - (uint32_t) MEMORY_SECTOR_SIZE }, //Sector Size - - { 0x00000000, 0x00000000 } } }; + // Specify Size and Address of Sectors (view example below) + {{(MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE), // number of sectors, + (uint32_t) MEMORY_SECTOR_SIZE}, // sector size + {0x00000000, 0x00000000}} // no additional sectors (all sectors are the same size) +}; diff --git a/Demo_Project_H7A3/Core/Src/Loader_Src.c b/Demo_Project_H7A3/Core/Src/Loader_Src.c new file mode 100644 index 0000000..f878bfd --- /dev/null +++ b/Demo_Project_H7A3/Core/Src/Loader_Src.c @@ -0,0 +1,265 @@ +#include "octospi.h" +#include "main.h" +#include "gpio.h" + +#define LOADER_OK 0x1 +#define LOADER_FAIL 0x0 + +void SystemClock_Config(void); + +/** + * @brief System initialization. + * @param None + * @retval LOADER_OK = 1 : Operation succeeded + * @retval LOADER_FAIL = 0 : Operation failed + */ +int Init(void) { + + *(uint32_t*)0xE000EDF0=0xA05F0000; //enable interrupts in debug + + SystemInit(); + +/* ADAPTATION TO THE DEVICE + * + * change VTOR setting for H7 device + * SCB->VTOR = 0x24000000 | 0x200; + * + * change VTOR setting for other devices + * SCB->VTOR = 0x20000000 | 0x200; + * + * */ + + SCB->VTOR = 0x20000000 | 0x200; + + HAL_Init(); + + SystemClock_Config(); + + MX_GPIO_Init(); + +// __HAL_RCC_QSPI_FORCE_RESET(); //completely reset peripheral +// __HAL_RCC_QSPI_RELEASE_RESET(); + + //completely reset peripheral: + __HAL_RCC_OSPI1_FORCE_RESET(); // or OSPI2? + __HAL_RCC_OSPI1_RELEASE_RESET(); // or OSPI2? + + + if (CSP_QUADSPI_Init() != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + + if (CSP_QSPI_EnableMemoryMappedMode() != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + HAL_SuspendTick(); + return LOADER_OK; +} + +/** + * @brief Program memory. + * @param Address: page address + * @param Size : size of data + * @param buffer : pointer to data buffer + * @retval LOADER_OK = 1 : Operation succeeded + * @retval LOADER_FAIL = 0 : Operation failed + */ +int Write(uint32_t Address, uint32_t Size, uint8_t* buffer) { + + HAL_ResumeTick(); + + + if(HAL_OSPI_Abort(&hospi1) != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + + if (CSP_QSPI_WriteMemory((uint8_t*) buffer, (Address & (0x0fffffff)),Size) != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + HAL_SuspendTick(); + return LOADER_OK; +} + +/** + * @brief Sector erase. + * @param EraseStartAddress : erase start address + * @param EraseEndAddress : erase end address + * @retval LOADER_OK = 1 : Operation succeeded + * @retval LOADER_FAIL = 0 : Operation failed + */ +int SectorErase(uint32_t EraseStartAddress, uint32_t EraseEndAddress) { + + HAL_ResumeTick(); + + if(HAL_OSPI_Abort(&hospi1) != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + + if (CSP_QSPI_EraseSector(EraseStartAddress, EraseEndAddress) != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + HAL_SuspendTick(); + return LOADER_OK; +} + +/** + * Description : + * Mass erase of external flash area + * Optional command - delete in case usage of mass erase is not planed + * Inputs : + * none + * outputs : + * none + * Note: Optional for all types of device + */ +int MassErase(void) { + + HAL_ResumeTick(); + + + if(HAL_OSPI_Abort(&hospi1) != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + + if (CSP_QSPI_Erase_Chip() != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + HAL_SuspendTick(); + return LOADER_OK; +} + +/** + * Description : + * Calculates checksum value of the memory zone + * Inputs : + * StartAddress : Flash start address + * Size : Size (in WORD) + * InitVal : Initial CRC value + * outputs : + * R0 : Checksum value + * Note: Optional for all types of device + */ +uint32_t CheckSum(uint32_t StartAddress, uint32_t Size, uint32_t InitVal) { + uint8_t missalignementAddress = StartAddress % 4; + uint8_t missalignementSize = Size; + int cnt; + uint32_t Val; + + StartAddress -= StartAddress % 4; + Size += (Size % 4 == 0) ? 0 : 4 - (Size % 4); + + for (cnt = 0; cnt < Size; cnt += 4) { + Val = *(uint32_t*) StartAddress; + if (missalignementAddress) { + switch (missalignementAddress) { + case 1: + InitVal += (uint8_t) (Val >> 8 & 0xff); + InitVal += (uint8_t) (Val >> 16 & 0xff); + InitVal += (uint8_t) (Val >> 24 & 0xff); + missalignementAddress -= 1; + break; + case 2: + InitVal += (uint8_t) (Val >> 16 & 0xff); + InitVal += (uint8_t) (Val >> 24 & 0xff); + missalignementAddress -= 2; + break; + case 3: + InitVal += (uint8_t) (Val >> 24 & 0xff); + missalignementAddress -= 3; + break; + } + } else if ((Size - missalignementSize) % 4 && (Size - cnt) <= 4) { + switch (Size - missalignementSize) { + case 1: + InitVal += (uint8_t) Val; + InitVal += (uint8_t) (Val >> 8 & 0xff); + InitVal += (uint8_t) (Val >> 16 & 0xff); + missalignementSize -= 1; + break; + case 2: + InitVal += (uint8_t) Val; + InitVal += (uint8_t) (Val >> 8 & 0xff); + missalignementSize -= 2; + break; + case 3: + InitVal += (uint8_t) Val; + missalignementSize -= 3; + break; + } + } else { + InitVal += (uint8_t) Val; + InitVal += (uint8_t) (Val >> 8 & 0xff); + InitVal += (uint8_t) (Val >> 16 & 0xff); + InitVal += (uint8_t) (Val >> 24 & 0xff); + } + StartAddress += 4; + } + + return (InitVal); +} + +/** + * Description : + * Verify flash memory with RAM buffer and calculates checksum value of + * the programmed memory + * Inputs : + * FlashAddr : Flash address + * RAMBufferAddr : RAM buffer address + * Size : Size (in WORD) + * InitVal : Initial CRC value + * outputs : + * R0 : Operation failed (address of failure) + * R1 : Checksum value + * Note: Optional for all types of device + */ +uint64_t Verify(uint32_t MemoryAddr, uint32_t RAMBufferAddr, uint32_t Size,uint32_t missalignement){ + + HAL_ResumeTick(); + uint32_t VerifiedData = 0, InitVal = 0; + uint64_t checksum; + Size *= 4; + + if (CSP_QSPI_EnableMemoryMappedMode() != HAL_OK) + { + HAL_SuspendTick(); + return LOADER_FAIL; + } + + checksum = CheckSum((uint32_t) MemoryAddr + (missalignement & 0xf), + Size - ((missalignement >> 16) & 0xF), InitVal); + while (Size > VerifiedData) { + if (*(uint8_t*) MemoryAddr++ + != *((uint8_t*) RAMBufferAddr + VerifiedData)){ + HAL_SuspendTick(); + return ((checksum << 32) + (MemoryAddr + VerifiedData)); + } + VerifiedData++; + } + + HAL_SuspendTick(); + return (checksum << 32); +} diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index c09f00c..624c030 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -236,7 +236,7 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress ,uint32_t EraseEndAddres return HAL_ERROR; } -uint8_t CSP_QSPI_WriteMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) +uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) { return HAL_ERROR; } diff --git a/Demo_Project_H7A3/linker.ld b/Demo_Project_H7A3/linker.ld new file mode 100644 index 0000000..e716463 --- /dev/null +++ b/Demo_Project_H7A3/linker.ld @@ -0,0 +1,160 @@ +/* +***************************************************************************** +** File : linker.ld +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Init) + +/* Generate 2 segment for Loader code and device info */ +PHDRS {Loader PT_LOAD ; SgInfo PT_LOAD ; } + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000004, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + + .isr_vector : + { + . = . + 0x1FC; + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >RAM :Loader + + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >RAM + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >RAM :Loader + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >RAM :Loader + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >RAM :Loader + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >RAM :Loader + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM :Loader + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM :Loader + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >RAM :Loader + + .Dev_info : + { + KEEP(*Dev_Inf.o ( .rodata* )) + } :SgInfo + + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >RAM :Loader + + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM :Loader + + + + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + From ce2c14e024b4cceca72123dc4f1598fdb79a76d0 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 9 Jan 2023 18:31:17 +0100 Subject: [PATCH 08/49] intermediate commit --- Demo_Project_H7A3/.cproject | 6 - Demo_Project_H7A3/Core/Inc/octospi.h | 4 +- Demo_Project_H7A3/Core/Src/main.c | 43 ++- Demo_Project_H7A3/Core/Src/octospi.c | 408 ++++++++++++++++++++++++++- Demo_Project_H7A3/Custom_Loader.ioc | 3 +- 5 files changed, 449 insertions(+), 15 deletions(-) diff --git a/Demo_Project_H7A3/.cproject b/Demo_Project_H7A3/.cproject index 2a21a8b..fd18b69 100644 --- a/Demo_Project_H7A3/.cproject +++ b/Demo_Project_H7A3/.cproject @@ -72,9 +72,6 @@ - - - @@ -150,9 +147,6 @@ - - - diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index b99a400..cc389fb 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -32,7 +32,7 @@ extern "C" { /* USER CODE END Includes */ - +extern OSPI_HandleTypeDef hospi1; /* USER CODE BEGIN Private defines */ @@ -42,6 +42,8 @@ extern "C" { #define MEMORY_SECTOR_SIZE (4UL << 10) // 8192 subsectors of 4KiB #define MEMORY_PAGE_SIZE 256 // 131072 pages of 256B +#define SECTORS_COUNT (MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE) + //MT25TL256 commands #define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 0b0d8f9..a1f0b16 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -23,7 +23,7 @@ /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ - +#include // for memcmp /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ @@ -55,6 +55,7 @@ void SystemClock_Config(void); /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ +static uint8_t buffer_test[MEMORY_SECTOR_SIZE]; /* USER CODE END 0 */ /** @@ -90,7 +91,47 @@ int main(void) MX_GPIO_Init(); MX_OCTOSPI1_Init(); /* USER CODE BEGIN 2 */ + + uint32_t var = 0; + + CSP_QUADSPI_Init(); + + for (var = 0; var < MEMORY_SECTOR_SIZE; var++) { + buffer_test[var] = (var & 0xff); + } + + for (var = 0; var < SECTORS_COUNT; var++) { + + if (CSP_QSPI_EraseSector(var * MEMORY_SECTOR_SIZE, + (var + 1) * MEMORY_SECTOR_SIZE - 1) != HAL_OK) { + + while (1) + ; //breakpoint - error detected + } + + if (CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_SECTOR_SIZE, + sizeof(buffer_test)) != HAL_OK) { + + while (1) + ; //breakpoint - error detected + } + + } + + if (CSP_QSPI_EnableMemoryMappedMode() != HAL_OK) { + + while (1) + ; //breakpoint - error detected + } + for (var = 0; var < SECTORS_COUNT; var++) { + if (memcmp(buffer_test, + (uint8_t*) (0x90000000 + var * MEMORY_SECTOR_SIZE), + MEMORY_SECTOR_SIZE) != HAL_OK) { + while (1) + ; //breakpoint - error detected - otherwise QSPI works properly + } + } /* USER CODE END 2 */ /* Infinite loop */ diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 624c030..8e81e95 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -21,7 +21,10 @@ #include "octospi.h" /* USER CODE BEGIN 0 */ - +static uint8_t QSPI_WriteEnable(void); +static uint8_t QSPI_AutoPollingMemReady(void); +static uint8_t QSPI_Configuration(void); +static uint8_t QSPI_ResetChip(void); /* USER CODE END 0 */ OSPI_HandleTypeDef hospi1; @@ -40,7 +43,7 @@ void MX_OCTOSPI1_Init(void) /* USER CODE END OCTOSPI1_Init 1 */ hospi1.Instance = OCTOSPI1; - hospi1.Init.FifoThreshold = 1; + hospi1.Init.FifoThreshold = 4; hospi1.Init.DualQuad = HAL_OSPI_DUALQUAD_ENABLE; hospi1.Init.MemoryType = HAL_OSPI_MEMTYPE_MICRON; hospi1.Init.DeviceSize = 32; @@ -226,27 +229,420 @@ void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef* ospiHandle) /* USER CODE BEGIN 1 */ -uint8_t CSP_QUADSPI_Init(void) +/* QUADSPI init function */ +uint8_t CSP_QUADSPI_Init(void) { + //prepare QSPI peripheral for ST-Link Utility operations + if (HAL_OSPI_DeInit(&hospi1) != HAL_OK) { + return HAL_ERROR; + } + + MX_OCTOSPI1_Init(); + + if (QSPI_ResetChip() != HAL_OK) { + return HAL_ERROR; + } + + HAL_Delay(1); + + if (QSPI_AutoPollingMemReady() != HAL_OK) { + return HAL_ERROR; + } + + if (QSPI_WriteEnable() != HAL_OK) { + + return HAL_ERROR; + } + + if (QSPI_Configuration() != HAL_OK) { + return HAL_ERROR; + } + + return HAL_OK; +} + + +uint8_t CSP_QSPI_Erase_Chip(void) +{ + OSPI_RegularCmdTypeDef sCommand = {}; + + + if (QSPI_WriteEnable() != HAL_OK) { + return HAL_ERROR; + } + + /* Erasing Sequence --------------------------------- */ + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = CHIP_ERASE_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_4_LINES; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_ENABLE; // todo check this + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_ENABLE; + sCommand.DataMode = HAL_OSPI_DATA_NONE; + sCommand.NbData = 0; //? + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) + != HAL_OK) { + return HAL_ERROR; + } + + if (QSPI_AutoPollingMemReady() != HAL_OK) { + return HAL_ERROR; + } + + return HAL_OK; +} + +static uint8_t QSPI_AutoPollingMemReady(void) { + OSPI_AutoPollingTypeDef sConfig = {}; + + sConfig.Match = 0x00; + sConfig.Mask = 0x01; + sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; + sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; + sConfig.Interval = 0x10; + + if (HAL_OSPI_AutoPolling(&hospi1, &sConfig, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + + return HAL_OK; + +// return HAL_ERROR; +} + +static uint8_t QSPI_WriteEnable(void) +{ +// QSPI_CommandTypeDef sCommand; +// QSPI_AutoPollingTypeDef sConfig; +// +// /* Enable write operations ------------------------------------------ */ +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.Instruction = WRITE_ENABLE_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_NONE; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DataMode = QSPI_DATA_NONE; +// sCommand.DummyCycles = 0; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// +// /* Configure automatic polling mode to wait for write enabling ---- */ +// sConfig.Match = 0x02; +// sConfig.Mask = 0x02; +// sConfig.MatchMode = QSPI_MATCH_MODE_AND; +// sConfig.StatusBytesSize = 1; +// sConfig.Interval = 0x10; +// sConfig.AutomaticStop = QSPI_AUTOMATIC_STOP_ENABLE; +// +// sCommand.Instruction = READ_STATUS_REG_CMD; +// sCommand.DataMode = QSPI_DATA_1_LINE; +// if (HAL_QSPI_AutoPolling(&hqspi, &sCommand, &sConfig, +// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { +// return HAL_ERROR; +// } +// +// return HAL_OK; + return HAL_ERROR; +} + +/*Enable quad mode and set dummy cycles count*/ +static uint8_t QSPI_Configuration(void) +{ + +// QSPI_CommandTypeDef sCommand; +// uint8_t test_buffer[4] = { 0 }; +// /*read status register*/ +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.Instruction = READ_STATUS_REG_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_NONE; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DataMode = QSPI_DATA_1_LINE; +// sCommand.DummyCycles = 0; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.NbData = 1; +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// if (HAL_QSPI_Receive(&hqspi, test_buffer, +// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { +// return HAL_ERROR; +// } +// /*read configuration register*/ +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.Instruction = READ_CONFIGURATION_REG_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_NONE; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DataMode = QSPI_DATA_1_LINE; +// sCommand.DummyCycles = 0; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.NbData = 1; +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// if (HAL_QSPI_Receive(&hqspi, &(test_buffer[1]), +// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { +// return HAL_ERROR; +// } +// /*modify buffer to enable quad mode*/ +// test_buffer[0] |= 0x40; +// +// /*set dummy cycles*/ +// test_buffer[1] |= 0xC0; +// +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.Instruction = WRITE_STATUS_REG_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_NONE; +// sCommand.DataMode = QSPI_DATA_1_LINE; +// sCommand.DummyCycles = 0; +// sCommand.NbData = 2; +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// +// if (HAL_QSPI_Transmit(&hqspi, test_buffer, +// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { +// Error_Handler(); +// return HAL_ERROR; +// } +// return HAL_OK; return HAL_ERROR; } -uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress ,uint32_t EraseEndAddress) +uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) { +// QSPI_CommandTypeDef sCommand; +// +// EraseStartAddress = EraseStartAddress +// - EraseStartAddress % MEMORY_SECTOR_SIZE; +// +// /* Erasing Sequence -------------------------------------------------- */ +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.Instruction = SECTOR_ERASE_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_1_LINE; +// +// sCommand.DataMode = QSPI_DATA_NONE; +// sCommand.DummyCycles = 0; +// +// while (EraseEndAddress >= EraseStartAddress) { +// sCommand.Address = (EraseStartAddress & 0x0FFFFFFF); +// +// if (QSPI_WriteEnable() != HAL_OK) { +// return HAL_ERROR; +// } +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// EraseStartAddress += MEMORY_SECTOR_SIZE; +// +// if (QSPI_AutoPollingMemReady() != HAL_OK) { +// return HAL_ERROR; +// } +// } +// +// return HAL_OK; return HAL_ERROR; } -uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) +uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address,uint32_t buffer_size) { + +// QSPI_CommandTypeDef sCommand; +// uint32_t end_addr, current_size, current_addr; +// +// /* Calculation of the size between the write address and the end of the page */ +// current_addr = 0; +// +// +// // +// while (current_addr <= address) { +// current_addr += MEMORY_PAGE_SIZE; +// } +// current_size = current_addr - address; +// +// /* Check if the size of the data is less than the remaining place in the page */ +// if (current_size > buffer_size) { +// current_size = buffer_size; +// } +// +// /* Initialize the adress variables */ +// current_addr = address; +// end_addr = address + buffer_size; +// +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.Instruction = QUAD_IN_FAST_PROG_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_4_LINES; +// sCommand.DataMode = QSPI_DATA_4_LINES; +// sCommand.NbData = buffer_size; +// sCommand.Address = address; +// sCommand.DummyCycles = 0; +// +// /* Perform the write page by page */ +// do { +// sCommand.Address = current_addr; +// sCommand.NbData = current_size; +// +// if (current_size == 0) { +// return HAL_OK; +// } +// +// /* Enable write operations */ +// if (QSPI_WriteEnable() != HAL_OK) { +// return HAL_ERROR; +// } +// +// /* Configure the command */ +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// +// return HAL_ERROR; +// } +// +// /* Transmission of the data */ +// if (HAL_QSPI_Transmit(&hqspi, buffer, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { +// +// return HAL_ERROR; +// } +// +// /* Configure automatic polling mode to wait for end of program */ +// if (QSPI_AutoPollingMemReady() != HAL_OK) { +// return HAL_ERROR; +// } +// +// /* Update the address and size variables for next page programming */ +// current_addr += current_size; +// buffer += current_size; +// current_size = +// ((current_addr + MEMORY_PAGE_SIZE) > end_addr) ? +// (end_addr - current_addr) : MEMORY_PAGE_SIZE; +// } while (current_addr <= end_addr); +// +// return HAL_OK; + return HAL_ERROR; } + uint8_t CSP_QSPI_EnableMemoryMappedMode(void) { +// +// QSPI_CommandTypeDef sCommand; +// QSPI_MemoryMappedTypeDef sMemMappedCfg; +// +// /* Enable Memory-Mapped mode-------------------------------------------------- */ +// +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_1_LINE; +// sCommand.DataMode = QSPI_DATA_4_LINES; +// sCommand.NbData = 0; +// sCommand.Address = 0; +// sCommand.Instruction = QUAD_OUT_FAST_READ_CMD; +// sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD; +// +// sMemMappedCfg.TimeOutActivation = QSPI_TIMEOUT_COUNTER_DISABLE; +// +// if (HAL_QSPI_MemoryMapped(&hqspi, &sCommand, &sMemMappedCfg) != HAL_OK) { +// return HAL_ERROR; +// } +// return HAL_OK; return HAL_ERROR; } -uint8_t CSP_QSPI_Erase_Chip (void); +static uint8_t QSPI_ResetChip() +{ +// QSPI_CommandTypeDef sCommand; +// uint32_t temp = 0; +// /* Erasing Sequence -------------------------------------------------- */ +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.Instruction = RESET_ENABLE_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_NONE; +// sCommand.Address = 0; +// sCommand.DataMode = QSPI_DATA_NONE; +// sCommand.DummyCycles = 0; +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// for (temp = 0; temp < 0x2f; temp++) { +// __NOP(); +// } +// +// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; +// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; +// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; +// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; +// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; +// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; +// sCommand.Instruction = RESET_EXECUTE_CMD; +// sCommand.AddressMode = QSPI_ADDRESS_NONE; +// sCommand.Address = 0; +// sCommand.DataMode = QSPI_DATA_NONE; +// sCommand.DummyCycles = 0; +// +// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// return HAL_ERROR; +// } +// return HAL_OK; + return HAL_ERROR; +} /* USER CODE END 1 */ diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index f9bc0be..1de7802 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -51,7 +51,8 @@ NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.SysTick_IRQn=true\:14\:0\:true\:false\:true\:false\:true\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false OCTOSPI1.ClockPrescaler=4 -OCTOSPI1.IPParameters=ClockPrescaler +OCTOSPI1.FifoThreshold=4 +OCTOSPI1.IPParameters=ClockPrescaler,FifoThreshold PA13.Mode=Serial_Wire PA13.Signal=DEBUG_JTMS-SWDIO PA14.Mode=Serial_Wire From 6212ce25fd7b7a085edcc897ca2db2481b00f511 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Tue, 10 Jan 2023 17:45:56 +0100 Subject: [PATCH 09/49] intermediate commit reset of chip fails --- Demo_Project_H7A3/Core/Src/octospi.c | 583 +++++++++---------- Demo_Project_H7A3/Custom_Loader Debug.launch | 77 +++ 2 files changed, 363 insertions(+), 297 deletions(-) create mode 100644 Demo_Project_H7A3/Custom_Loader Debug.launch diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 8e81e95..5be30fe 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -25,6 +25,9 @@ static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); static uint8_t QSPI_Configuration(void); static uint8_t QSPI_ResetChip(void); + +//#define USE_DDR + /* USER CODE END 0 */ OSPI_HandleTypeDef hospi1; @@ -275,20 +278,20 @@ uint8_t CSP_QSPI_Erase_Chip(void) sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = CHIP_ERASE_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_4_LINES; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_ENABLE; // todo check this + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = 0; sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_ENABLE; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; sCommand.DataMode = HAL_OSPI_DATA_NONE; sCommand.NbData = 0; //? - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -310,6 +313,8 @@ static uint8_t QSPI_AutoPollingMemReady(void) { OSPI_AutoPollingTypeDef sConfig = {}; + // todo: "avoid the auto-poll operations" + sConfig.Match = 0x00; sConfig.Mask = 0x01; sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; @@ -325,323 +330,307 @@ static uint8_t QSPI_AutoPollingMemReady(void) // return HAL_ERROR; } + static uint8_t QSPI_WriteEnable(void) { -// QSPI_CommandTypeDef sCommand; -// QSPI_AutoPollingTypeDef sConfig; -// -// /* Enable write operations ------------------------------------------ */ -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.Instruction = WRITE_ENABLE_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_NONE; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DataMode = QSPI_DATA_NONE; -// sCommand.DummyCycles = 0; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// -// /* Configure automatic polling mode to wait for write enabling ---- */ -// sConfig.Match = 0x02; -// sConfig.Mask = 0x02; -// sConfig.MatchMode = QSPI_MATCH_MODE_AND; -// sConfig.StatusBytesSize = 1; -// sConfig.Interval = 0x10; -// sConfig.AutomaticStop = QSPI_AUTOMATIC_STOP_ENABLE; -// -// sCommand.Instruction = READ_STATUS_REG_CMD; -// sCommand.DataMode = QSPI_DATA_1_LINE; -// if (HAL_QSPI_AutoPolling(&hqspi, &sCommand, &sConfig, -// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { -// return HAL_ERROR; -// } -// -// return HAL_OK; - return HAL_ERROR; + OSPI_RegularCmdTypeDef sCommand = {}; + OSPI_AutoPollingTypeDef sConfig = {}; + + /* Enable write operations ------------------------------------------ */ + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = WRITE_ENABLE_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_NONE; + sCommand.NbData = 0; //? + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) + != HAL_OK) { + return HAL_ERROR; + } + + /* Configure automatic polling mode to wait for write enabling ---- */ + sConfig.Match = 0x02; + sConfig.Mask = 0x02; + sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; + sConfig.Interval = 0x10; + sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; + + if (HAL_OSPI_AutoPolling(&hospi1, &sConfig, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + + return HAL_OK; } /*Enable quad mode and set dummy cycles count*/ static uint8_t QSPI_Configuration(void) { + OSPI_RegularCmdTypeDef sCommand = {}; + uint8_t test_buffer[4] = { 0 }; + /*read status register*/ -// QSPI_CommandTypeDef sCommand; -// uint8_t test_buffer[4] = { 0 }; -// /*read status register*/ -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.Instruction = READ_STATUS_REG_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_NONE; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DataMode = QSPI_DATA_1_LINE; -// sCommand.DummyCycles = 0; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.NbData = 1; -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// if (HAL_QSPI_Receive(&hqspi, test_buffer, -// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { -// return HAL_ERROR; -// } -// /*read configuration register*/ -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.Instruction = READ_CONFIGURATION_REG_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_NONE; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DataMode = QSPI_DATA_1_LINE; -// sCommand.DummyCycles = 0; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.NbData = 1; -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// if (HAL_QSPI_Receive(&hqspi, &(test_buffer[1]), -// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { -// return HAL_ERROR; -// } -// /*modify buffer to enable quad mode*/ -// test_buffer[0] |= 0x40; -// -// /*set dummy cycles*/ -// test_buffer[1] |= 0xC0; -// -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.Instruction = WRITE_STATUS_REG_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_NONE; -// sCommand.DataMode = QSPI_DATA_1_LINE; -// sCommand.DummyCycles = 0; -// sCommand.NbData = 2; -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// -// if (HAL_QSPI_Transmit(&hqspi, test_buffer, -// HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { -// Error_Handler(); -// return HAL_ERROR; -// } -// return HAL_OK; - return HAL_ERROR; + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = READ_STATUS_REG_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_NONE; + sCommand.NbData = 1;//why only 1 byte? + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + if (HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + //read 2nd half or other die? + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + if (HAL_OSPI_Receive(&hospi1, &(test_buffer[1]), HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + /*modify buffer to enable quad mode*/ + test_buffer[0] |= 0x40; + + /*set dummy cycles*/ + test_buffer[1] |= 0xC0; + + sCommand.NbData = 2; + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + + if (HAL_OSPI_Transmit(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + Error_Handler(); + return HAL_ERROR; + } + return HAL_OK; } uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) { -// QSPI_CommandTypeDef sCommand; -// -// EraseStartAddress = EraseStartAddress -// - EraseStartAddress % MEMORY_SECTOR_SIZE; -// -// /* Erasing Sequence -------------------------------------------------- */ -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.Instruction = SECTOR_ERASE_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_1_LINE; -// -// sCommand.DataMode = QSPI_DATA_NONE; -// sCommand.DummyCycles = 0; -// -// while (EraseEndAddress >= EraseStartAddress) { -// sCommand.Address = (EraseStartAddress & 0x0FFFFFFF); -// -// if (QSPI_WriteEnable() != HAL_OK) { -// return HAL_ERROR; -// } -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// EraseStartAddress += MEMORY_SECTOR_SIZE; -// -// if (QSPI_AutoPollingMemReady() != HAL_OK) { -// return HAL_ERROR; -// } -// } -// -// return HAL_OK; - return HAL_ERROR; + OSPI_RegularCmdTypeDef sCommand = {}; + + EraseStartAddress &= (MEMORY_SECTOR_SIZE -1); + + /* Erasing Sequence -------------------------------------------------- */ + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = SECTOR_ERASE_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; // todo: check this, quad should be enabled here + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_NONE; + sCommand.NbData = 0; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + while (EraseEndAddress >= EraseStartAddress) { + sCommand.Address = (EraseStartAddress & 0x0FFFFFFF); + + if (QSPI_WriteEnable() != HAL_OK) { + return HAL_ERROR; + } + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) + != HAL_OK) { + return HAL_ERROR; + } + EraseStartAddress += MEMORY_SECTOR_SIZE; + + if (QSPI_AutoPollingMemReady() != HAL_OK) { + return HAL_ERROR; + } + } + + return HAL_OK; } -uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address,uint32_t buffer_size) +uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) { + OSPI_RegularCmdTypeDef sCommand = {}; + uint32_t end_addr, current_size, current_addr; + + //todo check size in command since half the data goes to one die and half the data goes to the other die + + /* Calculation of the size between the write address and the end of the page */ + // todo improve this algoritm + current_addr = 0; + while (current_addr <= address) { + current_addr += MEMORY_PAGE_SIZE*2; + } + current_size = current_addr - address; + + + /* Check if the size of the data is less than the remaining place in the page */ + if (current_size > buffer_size) { + current_size = buffer_size; + } + + /* Initialize the address variables */ + current_addr = address; + end_addr = address + buffer_size; + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = QUAD_IN_FAST_PROG_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = address; + sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_4_LINES; + sCommand.NbData = buffer_size / 2; //todo check size + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + /* Perform the write page by page */ + do { + sCommand.Address = current_addr; + sCommand.NbData = current_size; -// QSPI_CommandTypeDef sCommand; -// uint32_t end_addr, current_size, current_addr; -// -// /* Calculation of the size between the write address and the end of the page */ -// current_addr = 0; -// -// -// // -// while (current_addr <= address) { -// current_addr += MEMORY_PAGE_SIZE; -// } -// current_size = current_addr - address; -// -// /* Check if the size of the data is less than the remaining place in the page */ -// if (current_size > buffer_size) { -// current_size = buffer_size; -// } -// -// /* Initialize the adress variables */ -// current_addr = address; -// end_addr = address + buffer_size; -// -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.Instruction = QUAD_IN_FAST_PROG_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_4_LINES; -// sCommand.DataMode = QSPI_DATA_4_LINES; -// sCommand.NbData = buffer_size; -// sCommand.Address = address; -// sCommand.DummyCycles = 0; -// -// /* Perform the write page by page */ -// do { -// sCommand.Address = current_addr; -// sCommand.NbData = current_size; -// -// if (current_size == 0) { -// return HAL_OK; -// } -// -// /* Enable write operations */ -// if (QSPI_WriteEnable() != HAL_OK) { -// return HAL_ERROR; -// } -// -// /* Configure the command */ -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// -// return HAL_ERROR; -// } -// -// /* Transmission of the data */ -// if (HAL_QSPI_Transmit(&hqspi, buffer, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { -// -// return HAL_ERROR; -// } -// -// /* Configure automatic polling mode to wait for end of program */ -// if (QSPI_AutoPollingMemReady() != HAL_OK) { -// return HAL_ERROR; -// } -// -// /* Update the address and size variables for next page programming */ -// current_addr += current_size; -// buffer += current_size; -// current_size = -// ((current_addr + MEMORY_PAGE_SIZE) > end_addr) ? -// (end_addr - current_addr) : MEMORY_PAGE_SIZE; -// } while (current_addr <= end_addr); -// -// return HAL_OK; - - return HAL_ERROR; + if (current_size == 0) { + return HAL_OK; + } + + /* Enable write operations */ + if (QSPI_WriteEnable() != HAL_OK) { + return HAL_ERROR; + } + + /* Configure the command */ + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) + != HAL_OK) { + + return HAL_ERROR; + } + + /* Transmission of the data */ + if (HAL_OSPI_Transmit(&hospi1, (uint8_t*)buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + + /* Configure automatic polling mode to wait for end of program */ + if (QSPI_AutoPollingMemReady() != HAL_OK) { + return HAL_ERROR; + } + + /* Update the address and size variables for next page programming */ + current_addr += current_size; + buffer += current_size; + current_size = ((current_addr + MEMORY_PAGE_SIZE*2) > end_addr) ? + (end_addr - current_addr) : MEMORY_PAGE_SIZE*2; + } while (current_addr <= end_addr); + + return HAL_OK; } uint8_t CSP_QSPI_EnableMemoryMappedMode(void) { -// -// QSPI_CommandTypeDef sCommand; -// QSPI_MemoryMappedTypeDef sMemMappedCfg; -// -// /* Enable Memory-Mapped mode-------------------------------------------------- */ -// -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_1_LINE; -// sCommand.DataMode = QSPI_DATA_4_LINES; -// sCommand.NbData = 0; -// sCommand.Address = 0; -// sCommand.Instruction = QUAD_OUT_FAST_READ_CMD; -// sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD; -// -// sMemMappedCfg.TimeOutActivation = QSPI_TIMEOUT_COUNTER_DISABLE; -// -// if (HAL_QSPI_MemoryMapped(&hqspi, &sCommand, &sMemMappedCfg) != HAL_OK) { -// return HAL_ERROR; -// } -// return HAL_OK; - return HAL_ERROR; + OSPI_MemoryMappedTypeDef sMemMappedCfg = {}; + + /* Enable Memory-Mapped mode-------------------------------------------------- */ + + + sMemMappedCfg.TimeOutActivation = HAL_OSPI_TIMEOUT_COUNTER_DISABLE; + sMemMappedCfg.TimeOutPeriod = 0; + + if (HAL_OSPI_MemoryMapped(&hospi1, &sMemMappedCfg) != HAL_OK) { + return HAL_ERROR; + } + return HAL_OK; } static uint8_t QSPI_ResetChip() { -// QSPI_CommandTypeDef sCommand; -// uint32_t temp = 0; -// /* Erasing Sequence -------------------------------------------------- */ -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.Instruction = RESET_ENABLE_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_NONE; -// sCommand.Address = 0; -// sCommand.DataMode = QSPI_DATA_NONE; -// sCommand.DummyCycles = 0; -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// for (temp = 0; temp < 0x2f; temp++) { -// __NOP(); -// } -// -// sCommand.InstructionMode = QSPI_INSTRUCTION_1_LINE; -// sCommand.AddressSize = QSPI_ADDRESS_24_BITS; -// sCommand.AlternateByteMode = QSPI_ALTERNATE_BYTES_NONE; -// sCommand.DdrMode = QSPI_DDR_MODE_DISABLE; -// sCommand.DdrHoldHalfCycle = QSPI_DDR_HHC_ANALOG_DELAY; -// sCommand.SIOOMode = QSPI_SIOO_INST_EVERY_CMD; -// sCommand.Instruction = RESET_EXECUTE_CMD; -// sCommand.AddressMode = QSPI_ADDRESS_NONE; -// sCommand.Address = 0; -// sCommand.DataMode = QSPI_DATA_NONE; -// sCommand.DummyCycles = 0; -// -// if (HAL_QSPI_Command(&hqspi, &sCommand, HAL_QPSI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// return HAL_ERROR; -// } -// return HAL_OK; - return HAL_ERROR; + OSPI_RegularCmdTypeDef sCommand = {}; + uint32_t temp = 0; + /* Erasing Sequence -------------------------------------------------- */ + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = RESET_ENABLE_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.NbData = 0; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + for (temp = 0; temp < 0x2f; temp++) { + __NOP(); + } + + sCommand.Instruction = RESET_EXECUTE_CMD; + + if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { + return HAL_ERROR; + } + return HAL_OK; } diff --git a/Demo_Project_H7A3/Custom_Loader Debug.launch b/Demo_Project_H7A3/Custom_Loader Debug.launch new file mode 100644 index 0000000..ded0062 --- /dev/null +++ b/Demo_Project_H7A3/Custom_Loader Debug.launch @@ -0,0 +1,77 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + From 44b11a4f99c6fe8a7319373c14e3d839e4266630 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Wed, 11 Jan 2023 11:54:51 +0100 Subject: [PATCH 10/49] intermediate commit: clocked flash lower, reading of first 2 id bytes works --- Demo_Project_H7A3/Core/Inc/octospi.h | 1 + Demo_Project_H7A3/Core/Src/main.c | 14 +-- Demo_Project_H7A3/Core/Src/octospi.c | 119 ++++++++++++++----- Demo_Project_H7A3/Custom_Loader Debug.launch | 1 + Demo_Project_H7A3/Custom_Loader.ioc | 105 ++++++++-------- 5 files changed, 152 insertions(+), 88 deletions(-) diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index cc389fb..5e4bf09 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -59,6 +59,7 @@ extern OSPI_HandleTypeDef hospi1; #define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE #define RESET_ENABLE_CMD 0x66 // RESET ENABLE #define RESET_EXECUTE_CMD 0x99 // RESET MEMORY +#define READ_ID_CMD 0x9E #define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // which one is this? sometimes 0,4,8 or 10 diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index a1f0b16..34ebb6b 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -96,6 +96,8 @@ int main(void) CSP_QUADSPI_Init(); + while(1); + for (var = 0; var < MEMORY_SECTOR_SIZE; var++) { buffer_test[var] = (var & 0xff); } @@ -167,10 +169,6 @@ void SystemClock_Config(void) while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} - /** Macro to configure the PLL clock source - */ - __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_CSI); - /** Initializes the RCC Oscillators according to the specified parameters * in the RCC_OscInitTypeDef structure. */ @@ -179,12 +177,12 @@ void SystemClock_Config(void) RCC_OscInitStruct.CSICalibrationValue = 16; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_CSI; - RCC_OscInitStruct.PLL.PLLM = 2; - RCC_OscInitStruct.PLL.PLLN = 280; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 135; RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 56; + RCC_OscInitStruct.PLL.PLLQ = 128; RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_1; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; RCC_OscInitStruct.PLL.PLLFRACN = 0; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 5be30fe..a89517c 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -26,6 +26,29 @@ static uint8_t QSPI_AutoPollingMemReady(void); static uint8_t QSPI_Configuration(void); static uint8_t QSPI_ResetChip(void); +static uint8_t QSPI_ReadChipId(void); + +#include + +typedef union +{ + struct{ + bool timeout:1; + bool transfer:1; + bool dma:1; + bool invalidParameter:1; + bool invalidSequence:1; + #if defined (USE_HAL_OSPI_REGISTER_CALLBACKS) && (USE_HAL_OSPI_REGISTER_CALLBACKS == 1U) + bool invalidCallback:1; + #else + bool reserved0:1; + #endif + uint32_t reserved1:26; + }; + uint32_t errorCode; +} +OspiErrorCodeType; + //#define USE_DDR /* USER CODE END 0 */ @@ -54,7 +77,7 @@ void MX_OCTOSPI1_Init(void) hospi1.Init.FreeRunningClock = HAL_OSPI_FREERUNCLK_DISABLE; hospi1.Init.ClockMode = HAL_OSPI_CLOCK_MODE_0; hospi1.Init.WrapSize = HAL_OSPI_WRAP_NOT_SUPPORTED; - hospi1.Init.ClockPrescaler = 4; + hospi1.Init.ClockPrescaler = 54; hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_NONE; hospi1.Init.DelayHoldQuarterCycle = HAL_OSPI_DHQC_DISABLE; hospi1.Init.ChipSelectBoundary = 0; @@ -93,15 +116,7 @@ void HAL_OSPI_MspInit(OSPI_HandleTypeDef* ospiHandle) /** Initializes the peripherals clock */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_OSPI; - PeriphClkInitStruct.PLL2.PLL2M = 1; - PeriphClkInitStruct.PLL2.PLL2N = 32; - PeriphClkInitStruct.PLL2.PLL2P = 45; - PeriphClkInitStruct.PLL2.PLL2Q = 125; - PeriphClkInitStruct.PLL2.PLL2R = 6; - PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_2; - PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE; - PeriphClkInitStruct.PLL2.PLL2FRACN = 0; - PeriphClkInitStruct.OspiClockSelection = RCC_OSPICLKSOURCE_PLL2; + PeriphClkInitStruct.OspiClockSelection = RCC_OSPICLKSOURCE_D1HCLK; if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { Error_Handler(); @@ -241,24 +256,26 @@ uint8_t CSP_QUADSPI_Init(void) { MX_OCTOSPI1_Init(); - if (QSPI_ResetChip() != HAL_OK) { - return HAL_ERROR; - } - - HAL_Delay(1); - - if (QSPI_AutoPollingMemReady() != HAL_OK) { - return HAL_ERROR; - } - - if (QSPI_WriteEnable() != HAL_OK) { - - return HAL_ERROR; - } - - if (QSPI_Configuration() != HAL_OK) { - return HAL_ERROR; - } + QSPI_ReadChipId(); + +// if (QSPI_ResetChip() != HAL_OK) { +// return HAL_ERROR; +// } +// +// HAL_Delay(1); +// +// if (QSPI_AutoPollingMemReady() != HAL_OK) { +// return HAL_ERROR; +// } +// +// if (QSPI_WriteEnable() != HAL_OK) { +// +// return HAL_ERROR; +// } +// +// if (QSPI_Configuration() != HAL_OK) { +// return HAL_ERROR; +// } return HAL_OK; } @@ -634,4 +651,50 @@ static uint8_t QSPI_ResetChip() } + +static uint8_t QSPI_ReadChipId(void) +{ + OSPI_RegularCmdTypeDef sCommand = {}; + uint8_t test_buffer[3*2] = { 0 }; + HAL_StatusTypeDef res = HAL_OK; + OspiErrorCodeType errorCode = {0}; + + /*read status register*/ + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = READ_ID_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.NbData = 3;//how many bytes? + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0;//3*8; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res == HAL_OK) { + res = HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + + if (res != HAL_OK) + { + errorCode.errorCode = hospi1.ErrorCode; + } + + return res; +} + + /* USER CODE END 1 */ diff --git a/Demo_Project_H7A3/Custom_Loader Debug.launch b/Demo_Project_H7A3/Custom_Loader Debug.launch index ded0062..feb5089 100644 --- a/Demo_Project_H7A3/Custom_Loader Debug.launch +++ b/Demo_Project_H7A3/Custom_Loader Debug.launch @@ -73,5 +73,6 @@ + diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index 1de7802..0779e8d 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -50,7 +50,7 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false NVIC.SysTick_IRQn=true\:14\:0\:true\:false\:true\:false\:true\:false NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false -OCTOSPI1.ClockPrescaler=4 +OCTOSPI1.ClockPrescaler=54 OCTOSPI1.FifoThreshold=4 OCTOSPI1.IPParameters=ClockPrescaler,FifoThreshold PA13.Mode=Serial_Wire @@ -107,99 +107,100 @@ ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=true ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_OCTOSPI1_Init-OCTOSPI1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true RCC.ADCFreq_Value=2844444.4444444445 -RCC.AHB12Freq_Value=280000000 -RCC.AHB4Freq_Value=280000000 -RCC.APB1Freq_Value=140000000 -RCC.APB2Freq_Value=140000000 -RCC.APB3Freq_Value=140000000 -RCC.APB4Freq_Value=140000000 -RCC.AXIClockFreq_Value=280000000 -RCC.CDCPREFreq_Value=280000000 +RCC.AHB12Freq_Value=270000000 +RCC.AHB4Freq_Value=270000000 +RCC.APB1Freq_Value=135000000 +RCC.APB2Freq_Value=135000000 +RCC.APB3Freq_Value=135000000 +RCC.APB4Freq_Value=135000000 +RCC.AXIClockFreq_Value=270000000 +RCC.CDCPREFreq_Value=270000000 RCC.CDPPRE=RCC_APB3_DIV2 RCC.CDPPRE1=RCC_APB1_DIV2 RCC.CDPPRE2=RCC_APB2_DIV2 RCC.CECFreq_Value=32000 RCC.CKPERFreq_Value=64000000 -RCC.CortexFreq_Value=280000000 -RCC.CpuClockFreq_Value=280000000 +RCC.CortexFreq_Value=270000000 +RCC.CpuClockFreq_Value=270000000 RCC.DAC1Freq_Value=32000 RCC.DAC2Freq_Value=32000 -RCC.DFSDM2ACLkFreq_Value=140000000 -RCC.DFSDM2Freq_Value=140000000 -RCC.DFSDMACLkFreq_Value=10000000 -RCC.DFSDMFreq_Value=140000000 -RCC.DIVM1=2 +RCC.DFSDM2ACLkFreq_Value=135000000 +RCC.DFSDM2Freq_Value=135000000 +RCC.DFSDMACLkFreq_Value=4218750 +RCC.DFSDMFreq_Value=135000000 +RCC.DIVM1=1 RCC.DIVM2=1 RCC.DIVM3=2 -RCC.DIVN1=280 +RCC.DIVN1=135 RCC.DIVN2=32 RCC.DIVN3=64 -RCC.DIVP1Freq_Value=280000000 +RCC.DIVP1Freq_Value=270000000 RCC.DIVP2=45 RCC.DIVP2Freq_Value=2844444.4444444445 RCC.DIVP3=1 RCC.DIVP3Freq_Value=128000000 -RCC.DIVQ1=56 -RCC.DIVQ1Freq_Value=10000000 +RCC.DIVQ1=128 +RCC.DIVQ1Freq_Value=4218750 RCC.DIVQ2=125 RCC.DIVQ2Freq_Value=1024000 RCC.DIVQ3=8 RCC.DIVQ3Freq_Value=16000000 -RCC.DIVR1Freq_Value=280000000 -RCC.DIVR2=6 -RCC.DIVR2Freq_Value=21333333.333333332 +RCC.DIVR1Freq_Value=270000000 +RCC.DIVR2=128 +RCC.DIVR2Freq_Value=1000000 RCC.DIVR3=16 RCC.DIVR3Freq_Value=8000000 -RCC.FDCANFreq_Value=10000000 -RCC.FMCFreq_Value=280000000 +RCC.FDCANFreq_Value=4218750 +RCC.FMCFreq_Value=270000000 RCC.FamilyName=M -RCC.HCLK3ClockFreq_Value=280000000 -RCC.HCLKFreq_Value=280000000 +RCC.HCLK3ClockFreq_Value=270000000 +RCC.HCLKFreq_Value=270000000 RCC.HSE_VALUE=12000000 -RCC.I2C123Freq_Value=140000000 -RCC.I2C4Freq_Value=140000000 -RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CDCPREFreq_Value,CDPPRE,CDPPRE1,CDPPRE2,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,DAC1Freq_Value,DAC2Freq_Value,DFSDM2ACLkFreq_Value,DFSDM2Freq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2,DIVP2Freq_Value,DIVP3,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2_VCI_Range-AdvancedSettings,PLL2_VCO_SEL-AdvancedSettings,PLLSourceVirtual,QSPICLockSelection,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2AFreq_Value,SAI2BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SRDPPRE,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SupplySource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value -RCC.LPTIM1Freq_Value=140000000 -RCC.LPTIM2Freq_Value=140000000 -RCC.LPTIM345Freq_Value=140000000 -RCC.LPUART1Freq_Value=140000000 +RCC.I2C123Freq_Value=135000000 +RCC.I2C4Freq_Value=135000000 +RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CDCPREFreq_Value,CDPPRE,CDPPRE1,CDPPRE2,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,DAC1Freq_Value,DAC2Freq_Value,DFSDM2ACLkFreq_Value,DFSDM2Freq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2,DIVP2Freq_Value,DIVP3,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLL2_VCO_SEL-AdvancedSettings,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2AFreq_Value,SAI2BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SRDPPRE,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SupplySource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value +RCC.LPTIM1Freq_Value=135000000 +RCC.LPTIM2Freq_Value=135000000 +RCC.LPTIM345Freq_Value=135000000 +RCC.LPUART1Freq_Value=135000000 RCC.LTDCFreq_Value=8000000 RCC.MCO1PinFreq_Value=64000000 -RCC.MCO2PinFreq_Value=280000000 +RCC.MCO2PinFreq_Value=270000000 +RCC.PLL2FRACN=0 RCC.PLL2_VCI_Range-AdvancedSettings=RCC_PLL2VCIRANGE_0 RCC.PLL2_VCO_SEL-AdvancedSettings=RCC_PLL2VCOMEDIUM +RCC.PLLFRACN=0 RCC.PLLSourceVirtual=RCC_PLLSOURCE_CSI -RCC.QSPICLockSelection=RCC_OSPICLKSOURCE_PLL2 -RCC.QSPIFreq_Value=21333333.333333332 +RCC.QSPIFreq_Value=270000000 RCC.RNGFreq_Value=48000000 RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE RCC.RTCFreq_Value=32768 -RCC.SAI1Freq_Value=10000000 -RCC.SAI2AFreq_Value=10000000 -RCC.SAI2BFreq_Value=10000000 -RCC.SDMMCFreq_Value=10000000 -RCC.SPDIFRXFreq_Value=10000000 -RCC.SPI123Freq_Value=10000000 -RCC.SPI45Freq_Value=140000000 -RCC.SPI6Freq_Value=140000000 +RCC.SAI1Freq_Value=4218750 +RCC.SAI2AFreq_Value=4218750 +RCC.SAI2BFreq_Value=4218750 +RCC.SDMMCFreq_Value=4218750 +RCC.SPDIFRXFreq_Value=4218750 +RCC.SPI123Freq_Value=4218750 +RCC.SPI45Freq_Value=135000000 +RCC.SPI6Freq_Value=135000000 RCC.SRDPPRE=RCC_APB4_DIV2 -RCC.SWPMI1Freq_Value=140000000 -RCC.SYSCLKFreq_VALUE=280000000 +RCC.SWPMI1Freq_Value=135000000 +RCC.SYSCLKFreq_VALUE=270000000 RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK RCC.SupplySource=PWR_LDO_SUPPLY -RCC.Tim1OutputFreq_Value=280000000 -RCC.Tim2OutputFreq_Value=280000000 -RCC.TraceFreq_Value=280000000 +RCC.Tim1OutputFreq_Value=270000000 +RCC.Tim2OutputFreq_Value=270000000 +RCC.TraceFreq_Value=270000000 RCC.USART16CLockSelection=RCC_USART16910CLKSOURCE_PLL2 RCC.USART16Freq_Value=1024000 RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL2 RCC.USART234578Freq_Value=1024000 RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3 RCC.USBFreq_Value=16000000 -RCC.VCO1OutputFreq_Value=560000000 +RCC.VCO1OutputFreq_Value=540000000 RCC.VCO2OutputFreq_Value=128000000 RCC.VCO3OutputFreq_Value=128000000 -RCC.VCOInput1Freq_Value=2000000 +RCC.VCOInput1Freq_Value=4000000 RCC.VCOInput2Freq_Value=4000000 RCC.VCOInput3Freq_Value=2000000 VP_OCTOSPI1_VS_octo.Mode=dual_quad_mode From 1ad3bebae6fc8f81ffad35581a3cd3727c57cdb8 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Wed, 11 Jan 2023 18:05:17 +0100 Subject: [PATCH 11/49] intermediate commit: reset and read id works --- Demo_Project_H7A3/Core/Src/octospi.c | 118 +++++++++++++++++---------- 1 file changed, 73 insertions(+), 45 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index a89517c..a63ea91 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -256,11 +256,15 @@ uint8_t CSP_QUADSPI_Init(void) { MX_OCTOSPI1_Init(); - QSPI_ReadChipId(); -// if (QSPI_ResetChip() != HAL_OK) { -// return HAL_ERROR; -// } + + if (QSPI_ResetChip() != HAL_OK) { + return HAL_ERROR; + } + + HAL_Delay(1); // todo remove magic number + + QSPI_ReadChipId(); // // HAL_Delay(1); // @@ -612,6 +616,8 @@ static uint8_t QSPI_ResetChip() { OSPI_RegularCmdTypeDef sCommand = {}; uint32_t temp = 0; + HAL_StatusTypeDef res = HAL_OK; + OspiErrorCodeType errorCode = {0}; /* Erasing Sequence -------------------------------------------------- */ sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? @@ -621,33 +627,45 @@ static uint8_t QSPI_ResetChip() sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = HAL_OSPI_DATA_NONE; sCommand.NbData = 0; sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; - } - for (temp = 0; temp < 0x2f; temp++) { - __NOP(); + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res == HAL_OK) + { + //delay + //todo remove magic number + for (temp = 0; temp < 47; temp++) + { + __NOP(); + } + + sCommand.Instruction = RESET_EXECUTE_CMD; + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); } - sCommand.Instruction = RESET_EXECUTE_CMD; - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; + // if an error occured: get error code: + if (res != HAL_OK) + { + errorCode.errorCode = hospi1.ErrorCode; } - return HAL_OK; + + + return res; } @@ -655,42 +673,52 @@ static uint8_t QSPI_ResetChip() static uint8_t QSPI_ReadChipId(void) { OSPI_RegularCmdTypeDef sCommand = {}; - uint8_t test_buffer[3*2] = { 0 }; + uint8_t test_buffer[20*2] = { 0 }; HAL_StatusTypeDef res = HAL_OK; OspiErrorCodeType errorCode = {0}; + int i; /*read status register*/ - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = READ_ID_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_1_LINE; - sCommand.NbData = 3;//how many bytes? - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0;//3*8; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - - if (res == HAL_OK) { - res = HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - } - - if (res != HAL_OK) + for(i=1;i<8;++i) { - errorCode.errorCode = hospi1.ErrorCode; + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; // + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = READ_ID_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.NbData = i*2; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res == HAL_OK) + { + if(sCommand.NbData > 0) // HAL_OSPI_Receive() crashes when length = 0! + { + res = HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + } + + if (res != HAL_OK) + { + errorCode.errorCode = hospi1.ErrorCode; + break; + } + HAL_Delay(1); } return res; From 195ccbb492812f5758b0f89e0babf29b7909b832 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Wed, 11 Jan 2023 18:05:42 +0100 Subject: [PATCH 12/49] added comment --- Demo_Project_H7A3/Core/Src/octospi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index a63ea91..c1546f6 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -697,7 +697,7 @@ static uint8_t QSPI_ReadChipId(void) sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; sCommand.DataMode = HAL_OSPI_DATA_1_LINE; - sCommand.NbData = i*2; + sCommand.NbData = i*2; //id needs to be read twice, so total number of bytes is doubled sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used From aefa97135ea918f61120d4dad5c80cb28c993e62 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Wed, 11 Jan 2023 18:13:37 +0100 Subject: [PATCH 13/49] intermediate commit --- Demo_Project_H7A3/Core/Src/octospi.c | 80 ++++++++++++++++------------ 1 file changed, 46 insertions(+), 34 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index c1546f6..d1ce2d6 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -673,54 +673,66 @@ static uint8_t QSPI_ResetChip() static uint8_t QSPI_ReadChipId(void) { OSPI_RegularCmdTypeDef sCommand = {}; - uint8_t test_buffer[20*2] = { 0 }; + uint8_t test_buffer[3*2] = { 0 }; HAL_StatusTypeDef res = HAL_OK; OspiErrorCodeType errorCode = {0}; - int i; /*read status register*/ + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; // + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = READ_ID_CMD; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = 0; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.NbData = sizeof(test_buffer); //id needs to be read twice, so total number of bytes is doubled + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - for(i=1;i<8;++i) + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res == HAL_OK) { - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; // - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = READ_ID_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_1_LINE; - sCommand.NbData = i*2; //id needs to be read twice, so total number of bytes is doubled - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + if(sCommand.NbData > 0) // HAL_OSPI_Receive() crashes when length = 0! + { + res = HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + } - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + if (res != HAL_OK) + { + errorCode.errorCode = hospi1.ErrorCode; + } - if (res == HAL_OK) + + if (res == HAL_OK) + { + if ( (test_buffer[0] == test_buffer[1]) && + (test_buffer[2] == test_buffer[3]) && + (test_buffer[4] == test_buffer[5]) && + (test_buffer[0] == 0x20) && + (test_buffer[2] == 0xBA) && + (test_buffer[4] == 0x18)) { - if(sCommand.NbData > 0) // HAL_OSPI_Receive() crashes when length = 0! - { - res = HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - } + // correct id } - - if (res != HAL_OK) + else { - errorCode.errorCode = hospi1.ErrorCode; - break; + res = HAL_ERROR; } - HAL_Delay(1); } + return res; } From bb1e08eb177712566f795b7ee2bbb2f16f95efee Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Wed, 11 Jan 2023 18:42:12 +0100 Subject: [PATCH 14/49] intermediate commit: refactored CSP_QSPI_WriteMemory --- Demo_Project_H7A3/Core/Inc/octospi.h | 3 +++ Demo_Project_H7A3/Core/Src/octospi.c | 35 ++++++++++++---------------- 2 files changed, 18 insertions(+), 20 deletions(-) diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index 5e4bf09..6b2b7eb 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -42,6 +42,9 @@ extern OSPI_HandleTypeDef hospi1; #define MEMORY_SECTOR_SIZE (4UL << 10) // 8192 subsectors of 4KiB #define MEMORY_PAGE_SIZE 256 // 131072 pages of 256B +#define MEMORY_DUAL_PAGE_SIZE (MEMORY_PAGE_SIZE*2) +#define MEMORY_DUAL_SECTOR_SIZE (MEMORY_SECTOR_SIZE*2) + #define SECTORS_COUNT (MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index d1ce2d6..8e9b714 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -462,7 +462,7 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres { OSPI_RegularCmdTypeDef sCommand = {}; - EraseStartAddress &= (MEMORY_SECTOR_SIZE -1); + EraseStartAddress &= (MEMORY_DUAL_SECTOR_SIZE -1); /* Erasing Sequence -------------------------------------------------- */ @@ -511,27 +511,19 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) { OSPI_RegularCmdTypeDef sCommand = {}; - uint32_t end_addr, current_size, current_addr; + uint32_t current_size; //number of bytes to write in current operation + uint32_t current_addr; //start address to write to in current operation + uint32_t bytesRemainingInPage; //todo check size in command since half the data goes to one die and half the data goes to the other die - /* Calculation of the size between the write address and the end of the page */ - // todo improve this algoritm - current_addr = 0; - while (current_addr <= address) { - current_addr += MEMORY_PAGE_SIZE*2; - } - current_size = current_addr - address; - + current_addr = address; - /* Check if the size of the data is less than the remaining place in the page */ - if (current_size > buffer_size) { - current_size = buffer_size; - } + bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); + current_size = (buffer_size > bytesRemainingInPage) ? bytesRemainingInPage : buffer_size; /* Initialize the address variables */ - current_addr = address; - end_addr = address + buffer_size; + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled @@ -548,7 +540,7 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; sCommand.DataMode = HAL_OSPI_DATA_4_LINES; - sCommand.NbData = buffer_size / 2; //todo check size + sCommand.NbData = current_size; sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used @@ -586,11 +578,14 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b } /* Update the address and size variables for next page programming */ + buffer_size -= current_size; current_addr += current_size; buffer += current_size; - current_size = ((current_addr + MEMORY_PAGE_SIZE*2) > end_addr) ? - (end_addr - current_addr) : MEMORY_PAGE_SIZE*2; - } while (current_addr <= end_addr); + + bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); + current_size = (buffer_size > bytesRemainingInPage) ? bytesRemainingInPage : buffer_size; + + } while (buffer_size); return HAL_OK; } From 9ef2478d382d40017347a3c2a4168203c2356a8f Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Thu, 12 Jan 2023 12:05:14 +0100 Subject: [PATCH 15/49] added QSPI_Command to simplify sending commands --- Demo_Project_H7A3/Core/Src/octospi.c | 159 ++++++++++++++++++++------- 1 file changed, 120 insertions(+), 39 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 8e9b714..11423c7 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -21,14 +21,22 @@ #include "octospi.h" /* USER CODE BEGIN 0 */ +#include + static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); static uint8_t QSPI_Configuration(void); static uint8_t QSPI_ResetChip(void); static uint8_t QSPI_ReadChipId(void); +static uint8_t QSPI_Command(uint8_t command, + bool hasAddress, + uint32_t address, + const uint8_t* writeData, + uint8_t* readData, + size_t dataLength); + -#include typedef union { @@ -607,6 +615,109 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) return HAL_OK; } +static uint8_t QSPI_Command(uint8_t command, + bool hasAddress, + uint32_t address, + const uint8_t* writeData, + uint8_t* readData, + size_t dataLength) +{ + // todo add line width option and dtr option + + OSPI_RegularCmdTypeDef sCommand = {0}; + HAL_StatusTypeDef res = HAL_OK; + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = command; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + + + if (hasAddress) + { + sCommand.AddressMode = HAL_OSPI_ADDRESS_1_LINE; + sCommand.Address = address; // todo check if this is correct + + if ((command == 0xE2) || (command == 0xE3)) // these commands are the only ones with 4 byte address + { + sCommand.AddressSize = HAL_OSPI_ADDRESS_32_BITS; + } + else + { + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + } + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + } + else + { + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.Address = 0; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + } + + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + + + if (dataLength > 0) + { + if ((writeData == NULL) != (readData == NULL)) + { + sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.NbData = dataLength; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + } + else + { + res = HAL_ERROR; + } + } + else + { + sCommand.DataMode = HAL_OSPI_DATA_NONE; + sCommand.NbData = 0; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + } + + + sCommand.DummyCycles = 0; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + if (res == HAL_OK) + { + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + + if (res == HAL_OK) + { + if (dataLength) + { + if (writeData != NULL) + { + res = HAL_OSPI_Transmit(&hospi1, (uint8_t*)writeData, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res == HAL_OK) + { + //Configure automatic polling mode to wait for end of program + res = QSPI_AutoPollingMemReady(); + } + } + else + { + res = HAL_OSPI_Receive(&hospi1, readData, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + } + } + + return res; +} + static uint8_t QSPI_ResetChip() { OSPI_RegularCmdTypeDef sCommand = {}; @@ -667,42 +778,11 @@ static uint8_t QSPI_ResetChip() static uint8_t QSPI_ReadChipId(void) { - OSPI_RegularCmdTypeDef sCommand = {}; uint8_t test_buffer[3*2] = { 0 }; HAL_StatusTypeDef res = HAL_OK; OspiErrorCodeType errorCode = {0}; - /*read status register*/ - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; // - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = READ_ID_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_1_LINE; - sCommand.NbData = sizeof(test_buffer); //id needs to be read twice, so total number of bytes is doubled - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - - if (res == HAL_OK) - { - if(sCommand.NbData > 0) // HAL_OSPI_Receive() crashes when length = 0! - { - res = HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - } - } + res = QSPI_Command(READ_ID_CMD, false, 0, NULL, test_buffer, sizeof(test_buffer)); if (res != HAL_OK) { @@ -712,12 +792,13 @@ static uint8_t QSPI_ReadChipId(void) if (res == HAL_OK) { - if ( (test_buffer[0] == test_buffer[1]) && - (test_buffer[2] == test_buffer[3]) && - (test_buffer[4] == test_buffer[5]) && - (test_buffer[0] == 0x20) && - (test_buffer[2] == 0xBA) && - (test_buffer[4] == 0x18)) + //even bytes are first die, odd bytes are second die + if ( (test_buffer[0*2+0] == test_buffer[0*2+1]) && + (test_buffer[1*2+0] == test_buffer[1*2+1]) && + (test_buffer[2*2+0] == test_buffer[2*2+1]) && + (test_buffer[0*2+0] == 0x20) && + (test_buffer[1*2+0] == 0xBA) && + (test_buffer[2*2+0] == 0x18)) { // correct id } From d65bbd2153472306747546d5aa30ad962e5789b1 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Thu, 12 Jan 2023 15:14:31 +0100 Subject: [PATCH 16/49] intermediate commit: testing driver --- Demo_Project_H7A3/Core/Inc/octospi.h | 20 +- Demo_Project_H7A3/Core/Src/Dev_Inf.c | 6 +- Demo_Project_H7A3/Core/Src/main.c | 58 ++--- Demo_Project_H7A3/Core/Src/octospi.c | 326 ++++++++++++++------------- 4 files changed, 205 insertions(+), 205 deletions(-) diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index 6b2b7eb..a05b095 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -33,7 +33,6 @@ extern "C" { /* USER CODE END Includes */ extern OSPI_HandleTypeDef hospi1; - /* USER CODE BEGIN Private defines */ //MT25TL256 memory parameters @@ -48,24 +47,7 @@ extern OSPI_HandleTypeDef hospi1; #define SECTORS_COUNT (MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE) -//MT25TL256 commands -#define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE -#define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER -#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER -#define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE -#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib) -#define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM -//#define READ_CONFIGURATION_REG_CMD 0x15 // page 50 table 24? -//#define QUAD_READ_IO_CMD 0xEC // ? -#define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ -#define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE -#define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE -#define RESET_ENABLE_CMD 0x66 // RESET ENABLE -#define RESET_EXECUTE_CMD 0x99 // RESET MEMORY -#define READ_ID_CMD 0x9E - - -#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // which one is this? sometimes 0,4,8 or 10 + /* USER CODE END Private defines */ diff --git a/Demo_Project_H7A3/Core/Src/Dev_Inf.c b/Demo_Project_H7A3/Core/Src/Dev_Inf.c index 7bc4b71..8e849bd 100644 --- a/Demo_Project_H7A3/Core/Src/Dev_Inf.c +++ b/Demo_Project_H7A3/Core/Src/Dev_Inf.c @@ -16,12 +16,12 @@ struct StorageInfo const StorageInfo = "STM32H7A3ZIT6Q_MT25TL256", // Device Name + version number NOR_FLASH, // Device Type 0x90000000, // Device Start Address - MEMORY_FLASH_SIZE, // Device Size in Bytes - MEMORY_PAGE_SIZE, // Programming Page Size + MEMORY_FLASH_SIZE*2, // Device Size in Bytes + MEMORY_PAGE_SIZE*2, // Programming Page Size 0xFF, // Initial Content of Erased Memory // Specify Size and Address of Sectors (view example below) {{(MEMORY_FLASH_SIZE / MEMORY_SECTOR_SIZE), // number of sectors, - (uint32_t) MEMORY_SECTOR_SIZE}, // sector size + (uint32_t) MEMORY_SECTOR_SIZE*2}, // sector size {0x00000000, 0x00000000}} // no additional sectors (all sectors are the same size) }; diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 34ebb6b..778341f 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -24,6 +24,7 @@ /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ #include // for memcmp +#include /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ @@ -55,7 +56,7 @@ void SystemClock_Config(void); /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ -static uint8_t buffer_test[MEMORY_SECTOR_SIZE]; +static uint8_t buffer_test[MEMORY_DUAL_SECTOR_SIZE]; /* USER CODE END 0 */ /** @@ -65,7 +66,8 @@ static uint8_t buffer_test[MEMORY_SECTOR_SIZE]; int main(void) { /* USER CODE BEGIN 1 */ - + HAL_StatusTypeDef res = HAL_OK; + volatile bool testFlash = false; // make high with debugger /* USER CODE END 1 */ /* Enable I-Cache---------------------------------------------------------*/ @@ -94,44 +96,42 @@ int main(void) uint32_t var = 0; - CSP_QUADSPI_Init(); + res = CSP_QUADSPI_Init(); - while(1); + while(!testFlash); // make high with debugger to proceed to test - for (var = 0; var < MEMORY_SECTOR_SIZE; var++) { + for (var = 0; var < MEMORY_DUAL_SECTOR_SIZE; var++) + { buffer_test[var] = (var & 0xff); } - for (var = 0; var < SECTORS_COUNT; var++) { - - if (CSP_QSPI_EraseSector(var * MEMORY_SECTOR_SIZE, - (var + 1) * MEMORY_SECTOR_SIZE - 1) != HAL_OK) { - while (1) - ; //breakpoint - error detected + for (var = 0; var < SECTORS_COUNT; var++) + { + res = CSP_QSPI_EraseSector(var * MEMORY_DUAL_SECTOR_SIZE, (var + 1) * MEMORY_DUAL_SECTOR_SIZE - 1); + if (res != HAL_OK) + { + while (1); //breakpoint - error detected } - if (CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_SECTOR_SIZE, - sizeof(buffer_test)) != HAL_OK) { - - while (1) - ; //breakpoint - error detected + res = CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); + if (res != HAL_OK) + { + while (1); //breakpoint - error detected } - - } - - if (CSP_QSPI_EnableMemoryMappedMode() != HAL_OK) { - - while (1) - ; //breakpoint - error detected } - for (var = 0; var < SECTORS_COUNT; var++) { - if (memcmp(buffer_test, - (uint8_t*) (0x90000000 + var * MEMORY_SECTOR_SIZE), - MEMORY_SECTOR_SIZE) != HAL_OK) { - while (1) - ; //breakpoint - error detected - otherwise QSPI works properly + res = CSP_QSPI_EnableMemoryMappedMode(); + if (res != HAL_OK) + { + while (1); //breakpoint - error detected + } + + for (var = 0; var < SECTORS_COUNT; var++) + { + if (memcmp(buffer_test, (uint8_t*) (0x90000000 + var * MEMORY_DUAL_SECTOR_SIZE), MEMORY_DUAL_SECTOR_SIZE) != 0) + { + while (1); //breakpoint - error detected - otherwise QSPI works properly } } /* USER CODE END 2 */ diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 11423c7..0c0cb4e 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -36,6 +36,7 @@ static uint8_t QSPI_Command(uint8_t command, uint8_t* readData, size_t dataLength); +static uint8_t QSPI_AutoPollingSetup(void); typedef union @@ -57,6 +58,38 @@ typedef union } OspiErrorCodeType; + +//MT25TL256 commands +#define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE +#define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER +#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER +#define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE +#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib) +#define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM +//#define READ_CONFIGURATION_REG_CMD 0x15 // page 50 table 24? +//#define QUAD_READ_IO_CMD 0xEC // ? +#define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ +#define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE +#define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE +#define RESET_ENABLE_CMD 0x66 // RESET ENABLE +#define RESET_EXECUTE_CMD 0x99 // RESET MEMORY +#define READ_ID_CMD 0x9E + +#define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 +#define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 +#define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 +#define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 + + + +#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // todo: check which one is this? sometimes 0,4,8 or 10 +#define FAST_READ_DUMMY_CYCLES 10 + +#define AUTO_POLLING_INTERVAL 16 // todo check + +#define STATUS_REG_WIP_MASK (1UL<<0) +#define STATUS_REG_WEL_MASK (1UL<<1) + //#define USE_DDR /* USER CODE END 0 */ @@ -257,39 +290,53 @@ void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef* ospiHandle) /* QUADSPI init function */ uint8_t CSP_QUADSPI_Init(void) { + HAL_StatusTypeDef res = HAL_OK; + volatile OspiErrorCodeType errorCode = {0}; + //prepare QSPI peripheral for ST-Link Utility operations - if (HAL_OSPI_DeInit(&hospi1) != HAL_OK) { - return HAL_ERROR; - } + res = HAL_OSPI_DeInit(&hospi1); MX_OCTOSPI1_Init(); - - if (QSPI_ResetChip() != HAL_OK) { - return HAL_ERROR; + if (res == HAL_OK) + { + res = QSPI_ResetChip(); } + HAL_Delay(1); // todo remove magic number - QSPI_ReadChipId(); -// -// HAL_Delay(1); -// -// if (QSPI_AutoPollingMemReady() != HAL_OK) { -// return HAL_ERROR; -// } -// -// if (QSPI_WriteEnable() != HAL_OK) { -// -// return HAL_ERROR; -// } -// -// if (QSPI_Configuration() != HAL_OK) { -// return HAL_ERROR; -// } - return HAL_OK; + if (res == HAL_OK) + { + res = QSPI_ReadChipId(); + } + + + if (res == HAL_OK) + { + res = QSPI_AutoPollingMemReady(); + } + + if (res == HAL_OK) + { + res = QSPI_WriteEnable(); + } + + if (res == HAL_OK) + { + res = QSPI_Configuration(); + } + + if (res != HAL_OK) + { + errorCode.errorCode = hospi1.ErrorCode; + } + + (void)errorCode; + + return res; } @@ -338,139 +385,148 @@ uint8_t CSP_QSPI_Erase_Chip(void) return HAL_OK; } -static uint8_t QSPI_AutoPollingMemReady(void) -{ - OSPI_AutoPollingTypeDef sConfig = {}; - - // todo: "avoid the auto-poll operations" - - sConfig.Match = 0x00; - sConfig.Mask = 0x01; - sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; - sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; - sConfig.Interval = 0x10; - - if (HAL_OSPI_AutoPolling(&hospi1, &sConfig, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; - } - - return HAL_OK; - -// return HAL_ERROR; -} - - -static uint8_t QSPI_WriteEnable(void) +static uint8_t QSPI_AutoPollingSetup(void) { - OSPI_RegularCmdTypeDef sCommand = {}; - OSPI_AutoPollingTypeDef sConfig = {}; + OSPI_RegularCmdTypeDef sCommand = {0}; + HAL_StatusTypeDef res = HAL_OK; - /* Enable write operations ------------------------------------------ */ sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = WRITE_ENABLE_CMD; + sCommand.Instruction = READ_STATUS_REG_CMD; sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.Address = 0; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytes = 0; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_NONE; - sCommand.NbData = 0; //? + sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.NbData = 2; // todo check if this is correct sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) - != HAL_OK) { - return HAL_ERROR; + if (res == HAL_OK) + { + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); } - /* Configure automatic polling mode to wait for write enabling ---- */ - sConfig.Match = 0x02; - sConfig.Mask = 0x02; - sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; - sConfig.Interval = 0x10; - sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; + return res; +} - if (HAL_OSPI_AutoPolling(&hospi1, &sConfig, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; +static uint8_t QSPI_AutoPollingMemReady(void) +{ + OSPI_AutoPollingTypeDef sConfig = {}; + HAL_StatusTypeDef res = HAL_OK; + + // todo: "avoid the auto-poll operations" + + res = QSPI_AutoPollingSetup(); + + if (res == HAL_OK) + { + sConfig.Match = 0; + sConfig.Mask = (STATUS_REG_WIP_MASK<<0) | (STATUS_REG_WIP_MASK<<8); + sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; + sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; + sConfig.Interval = AUTO_POLLING_INTERVAL; + + res = HAL_OSPI_AutoPolling(&hospi1, &sConfig, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); } - return HAL_OK; + return res; +} + + +static uint8_t QSPI_WriteEnable(void) +{ + HAL_StatusTypeDef res = HAL_OK; + OSPI_AutoPollingTypeDef sConfig = {}; + + /* Enable write operations ------------------------------------------ */ + + res = QSPI_Command(WRITE_ENABLE_CMD, false, 0, NULL, NULL, 0); + + if (res == HAL_OK) + { + res = QSPI_AutoPollingSetup(); + } + + if (res == HAL_OK) + { + /* Configure automatic polling mode to wait for write enabling ---- */ + + + sConfig.Match = STATUS_REG_WEL_MASK | (STATUS_REG_WEL_MASK<<8); + sConfig.Mask = STATUS_REG_WEL_MASK | (STATUS_REG_WEL_MASK<<8); + +// sConfig.Match = STATUS_REG_WEL_MASK; +// sConfig.Mask = STATUS_REG_WEL_MASK; + + sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; + sConfig.Interval = AUTO_POLLING_INTERVAL; + sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; + + res = HAL_OSPI_AutoPolling(&hospi1, &sConfig, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + + return res; } /*Enable quad mode and set dummy cycles count*/ static uint8_t QSPI_Configuration(void) { - OSPI_RegularCmdTypeDef sCommand = {}; - uint8_t test_buffer[4] = { 0 }; + HAL_StatusTypeDef res = HAL_OK; + uint8_t test_buffer[2] = { 0 }; /*read status register*/ - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = READ_STATUS_REG_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_NONE; - sCommand.NbData = 1;//why only 1 byte? - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + // RMW dummy cycles: + res = QSPI_Command(READ_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; - } - if (HAL_OSPI_Receive(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; - } - //read 2nd half or other die? - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; + if (res == HAL_OK) + { + test_buffer[0] &= ~(((1<<4)-1)<<4); + test_buffer[0] |= FAST_READ_DUMMY_CYCLES << 4; + test_buffer[1] &= ~(((1<<4)-1)<<4); + test_buffer[1] |= FAST_READ_DUMMY_CYCLES << 4; + + res = QSPI_Command(WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); } - if (HAL_OSPI_Receive(&hospi1, &(test_buffer[1]), HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; + + // RMW dummy cycles: + + if (res == HAL_OK) + { + res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); } - /*modify buffer to enable quad mode*/ - test_buffer[0] |= 0x40; - /*set dummy cycles*/ - test_buffer[1] |= 0xC0; + if (res == HAL_OK) + { + test_buffer[0] |= ((1<<2)-1)<<6; + test_buffer[0] &= ~(1 << 7); // enable Quad mode + test_buffer[1] |= ((1<<2)-1)<<6; + test_buffer[1] &= ~(1 << 7); // enable Quad mode - sCommand.NbData = 2; +// //TODO: enable DTR +// test_buffer[0] &= ~(1 << 5); // enable DTR mode +// test_buffer[1] &= ~(1 << 5); // enable DTR mode - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; + res = QSPI_Command(WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); } - if (HAL_OSPI_Transmit(&hospi1, test_buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - Error_Handler(); - return HAL_ERROR; - } - return HAL_OK; + return res; } uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) { OSPI_RegularCmdTypeDef sCommand = {}; - EraseStartAddress &= (MEMORY_DUAL_SECTOR_SIZE -1); + EraseStartAddress &= (MEMORY_DUAL_SECTOR_SIZE - 1); /* Erasing Sequence -------------------------------------------------- */ @@ -684,6 +740,8 @@ static uint8_t QSPI_Command(uint8_t command, sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; } + //todo set FAST_READ_DUMMY_CYCLES + sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used @@ -720,35 +778,11 @@ static uint8_t QSPI_Command(uint8_t command, static uint8_t QSPI_ResetChip() { - OSPI_RegularCmdTypeDef sCommand = {}; uint32_t temp = 0; HAL_StatusTypeDef res = HAL_OK; - OspiErrorCodeType errorCode = {0}; /* Erasing Sequence -------------------------------------------------- */ - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = RESET_ENABLE_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_NONE; - sCommand.NbData = 0; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - - - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + res = QSPI_Command(RESET_ENABLE_CMD, false, 0, NULL, NULL, 0); if (res == HAL_OK) { @@ -759,18 +793,9 @@ static uint8_t QSPI_ResetChip() __NOP(); } - sCommand.Instruction = RESET_EXECUTE_CMD; - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - } - - - // if an error occured: get error code: - if (res != HAL_OK) - { - errorCode.errorCode = hospi1.ErrorCode; + res = QSPI_Command(RESET_EXECUTE_CMD, false, 0, NULL, NULL, 0); } - return res; } @@ -780,16 +805,9 @@ static uint8_t QSPI_ReadChipId(void) { uint8_t test_buffer[3*2] = { 0 }; HAL_StatusTypeDef res = HAL_OK; - OspiErrorCodeType errorCode = {0}; res = QSPI_Command(READ_ID_CMD, false, 0, NULL, test_buffer, sizeof(test_buffer)); - if (res != HAL_OK) - { - errorCode.errorCode = hospi1.ErrorCode; - } - - if (res == HAL_OK) { //even bytes are first die, odd bytes are second die From 988f3b960fd1542a9cf9e14566b6ec89c4e6ffb6 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Thu, 12 Jan 2023 16:54:44 +0100 Subject: [PATCH 17/49] intermediate commit --- Demo_Project_H7A3/Core/Inc/octospi.h | 2 + Demo_Project_H7A3/Core/Src/main.c | 22 ++-- Demo_Project_H7A3/Core/Src/octospi.c | 102 +++++++++++++++++-- Demo_Project_H7A3/Custom_Loader Debug.launch | 2 +- 4 files changed, 109 insertions(+), 19 deletions(-) diff --git a/Demo_Project_H7A3/Core/Inc/octospi.h b/Demo_Project_H7A3/Core/Inc/octospi.h index a05b095..aeaeadd 100644 --- a/Demo_Project_H7A3/Core/Inc/octospi.h +++ b/Demo_Project_H7A3/Core/Inc/octospi.h @@ -33,6 +33,7 @@ extern "C" { /* USER CODE END Includes */ extern OSPI_HandleTypeDef hospi1; + /* USER CODE BEGIN Private defines */ //MT25TL256 memory parameters @@ -58,6 +59,7 @@ void MX_OCTOSPI1_Init(void); uint8_t CSP_QUADSPI_Init(void); uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress ,uint32_t EraseEndAddress); uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size); +uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size); uint8_t CSP_QSPI_EnableMemoryMappedMode(void); uint8_t CSP_QSPI_Erase_Chip(void); diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 778341f..c262e75 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -57,6 +57,8 @@ void SystemClock_Config(void); /* USER CODE BEGIN 0 */ static uint8_t buffer_test[MEMORY_DUAL_SECTOR_SIZE]; +static uint8_t buffer_test_read[MEMORY_DUAL_SECTOR_SIZE]; +#define NUMBER_OF_SECTORS_TO_TEST 2 /* USER CODE END 0 */ /** @@ -106,7 +108,7 @@ int main(void) } - for (var = 0; var < SECTORS_COUNT; var++) + for (var = 0; var < NUMBER_OF_SECTORS_TO_TEST; var++) { res = CSP_QSPI_EraseSector(var * MEMORY_DUAL_SECTOR_SIZE, (var + 1) * MEMORY_DUAL_SECTOR_SIZE - 1); if (res != HAL_OK) @@ -114,20 +116,26 @@ int main(void) while (1); //breakpoint - error detected } - res = CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); - if (res != HAL_OK) - { - while (1); //breakpoint - error detected - } +// res = CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); +// if (res != HAL_OK) +// { +// while (1); //breakpoint - error detected +// } } + res = CSP_QSPI_ReadMemory(buffer_test_read, 0, sizeof(buffer_test_read)); + if (res != HAL_OK) + { + while (1); //breakpoint - error detected + } + res = CSP_QSPI_EnableMemoryMappedMode(); if (res != HAL_OK) { while (1); //breakpoint - error detected } - for (var = 0; var < SECTORS_COUNT; var++) + for (var = 0; var < NUMBER_OF_SECTORS_TO_TEST; var++) { if (memcmp(buffer_test, (uint8_t*) (0x90000000 + var * MEMORY_DUAL_SECTOR_SIZE), MEMORY_DUAL_SECTOR_SIZE) != 0) { diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 0c0cb4e..76ab1cc 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -533,11 +533,11 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = SECTOR_ERASE_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; // todo: check this, quad should be enabled here + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_4_LINES; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommand.Address = EraseStartAddress; + sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; @@ -551,8 +551,8 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - while (EraseEndAddress >= EraseStartAddress) { - sCommand.Address = (EraseStartAddress & 0x0FFFFFFF); + while (EraseEndAddress >= EraseStartAddress) + { if (QSPI_WriteEnable() != HAL_OK) { return HAL_ERROR; @@ -562,7 +562,7 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres != HAL_OK) { return HAL_ERROR; } - EraseStartAddress += MEMORY_SECTOR_SIZE; + EraseStartAddress += MEMORY_DUAL_SECTOR_SIZE; if (QSPI_AutoPollingMemReady() != HAL_OK) { return HAL_ERROR; @@ -572,6 +572,45 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres return HAL_OK; } +uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) +{ + OSPI_RegularCmdTypeDef sCommand = {}; + HAL_StatusTypeDef res = HAL_OK; + + sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommand.FlashId = 0; //only applies if Dualquad is disabled + sCommand.Instruction = 0x0B; // fast read + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.Address = address; + sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AlternateBytes = 0; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.AlternateBytesSize = 0; + sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommand.DataMode = HAL_OSPI_DATA_4_LINES; + sCommand.NbData = buffer_size; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD; + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + + // Configure the command + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res == HAL_OK) + { + // read of the data + res = HAL_OSPI_Receive(&hospi1, buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } + + return res; +} + uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) { OSPI_RegularCmdTypeDef sCommand = {}; @@ -658,17 +697,58 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b uint8_t CSP_QSPI_EnableMemoryMappedMode(void) { OSPI_MemoryMappedTypeDef sMemMappedCfg = {}; + HAL_StatusTypeDef res = HAL_OK; + OSPI_RegularCmdTypeDef sCommand = {}; + + /* Initialize memory-mapped mode for read operations */ + sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; + sCommand.Instruction = 0xEB;// QUAD INPUT/OUTPUT FAST READ; + sCommand.FlashId = 0; + sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_4_LINES; + sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; + sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommand.DataMode = HAL_OSPI_DATA_4_LINES; + sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD; + sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + +// sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_ENABLE; +// sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; +// sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; + + sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + + sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + + if (res !=HAL_OK) + { + Error_Handler(); + } + - /* Enable Memory-Mapped mode-------------------------------------------------- */ + /* Initialize memory-mapped mode for write operations */ + sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; + sCommand.Instruction = 0x32; // QUAD INPUT FAST PROGRAM Command + sCommand.DummyCycles = 0; + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + if (res !=HAL_OK) + { + Error_Handler(); + } sMemMappedCfg.TimeOutActivation = HAL_OSPI_TIMEOUT_COUNTER_DISABLE; sMemMappedCfg.TimeOutPeriod = 0; - if (HAL_OSPI_MemoryMapped(&hospi1, &sMemMappedCfg) != HAL_OK) { - return HAL_ERROR; - } - return HAL_OK; + res = HAL_OSPI_MemoryMapped(&hospi1, &sMemMappedCfg); + + return res; } static uint8_t QSPI_Command(uint8_t command, diff --git a/Demo_Project_H7A3/Custom_Loader Debug.launch b/Demo_Project_H7A3/Custom_Loader Debug.launch index feb5089..93a0fb6 100644 --- a/Demo_Project_H7A3/Custom_Loader Debug.launch +++ b/Demo_Project_H7A3/Custom_Loader Debug.launch @@ -73,6 +73,6 @@ - + From dd6462080b238b554bec9d765a78354fd54902bd Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Thu, 12 Jan 2023 19:39:17 +0100 Subject: [PATCH 18/49] reading from volatile enhanced after writing fails --- Demo_Project_H7A3/Core/Src/octospi.c | 285 +++++++++++++++++---------- 1 file changed, 176 insertions(+), 109 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 76ab1cc..115fd0e 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -22,6 +22,38 @@ /* USER CODE BEGIN 0 */ #include +#include // for memset + +//MT25TL256 commands +#define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE +#define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER +#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER +#define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE +#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib) +#define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM +//#define READ_CONFIGURATION_REG_CMD 0x15 // page 50 table 24? +//#define QUAD_READ_IO_CMD 0xEC // ? +#define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ +#define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE +#define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE +#define RESET_ENABLE_CMD 0x66 // RESET ENABLE +#define RESET_EXECUTE_CMD 0x99 // RESET MEMORY +#define READ_ID_CMD 0x9E + +#define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 +#define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 +#define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 +#define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 + + + +//#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // todo: check which one is this? sometimes 0,4,8 or 10 +#define FAST_READ_DUMMY_CYCLES 10 + +#define AUTO_POLLING_INTERVAL 16 // todo check + +#define STATUS_REG_WIP_MASK (1UL<<0) +#define STATUS_REG_WEL_MASK (1UL<<1) static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); @@ -58,37 +90,19 @@ typedef union } OspiErrorCodeType; +typedef struct +{ + OspiErrorCodeType latestError; -//MT25TL256 commands -#define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE -#define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER -#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER -#define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE -#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib) -#define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM -//#define READ_CONFIGURATION_REG_CMD 0x15 // page 50 table 24? -//#define QUAD_READ_IO_CMD 0xEC // ? -#define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ -#define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE -#define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE -#define RESET_ENABLE_CMD 0x66 // RESET ENABLE -#define RESET_EXECUTE_CMD 0x99 // RESET MEMORY -#define READ_ID_CMD 0x9E - -#define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 -#define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 -#define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 -#define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 - - + bool quadModeEnabled; // 4-4-4 if true, 1-1-1 if false + bool dtrEnabled; // dtr for command, address and data + bool switchingToQuad; +} +DualQuadStateType; -#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // todo: check which one is this? sometimes 0,4,8 or 10 -#define FAST_READ_DUMMY_CYCLES 10 -#define AUTO_POLLING_INTERVAL 16 // todo check -#define STATUS_REG_WIP_MASK (1UL<<0) -#define STATUS_REG_WEL_MASK (1UL<<1) +static DualQuadStateType DualQuadState; //#define USE_DDR @@ -298,7 +312,6 @@ uint8_t CSP_QUADSPI_Init(void) { MX_OCTOSPI1_Init(); - if (res == HAL_OK) { res = QSPI_ResetChip(); @@ -329,11 +342,19 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_Configuration(); } + if (res == HAL_OK) + { + res = QSPI_ReadChipId(); + } + + if (res != HAL_OK) { errorCode.errorCode = hospi1.ErrorCode; } + + (void)errorCode; return res; @@ -354,13 +375,13 @@ uint8_t CSP_QSPI_Erase_Chip(void) sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = CHIP_ERASE_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = 0; sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; @@ -393,20 +414,21 @@ static uint8_t QSPI_AutoPollingSetup(void) sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = READ_STATUS_REG_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; sCommand.Address = 0; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = 2; // todo check if this is correct - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -482,94 +504,131 @@ static uint8_t QSPI_WriteEnable(void) static uint8_t QSPI_Configuration(void) { HAL_StatusTypeDef res = HAL_OK; - uint8_t test_buffer[2] = { 0 }; + uint8_t read_buffer[2] = { 0 }; + uint8_t write_buffer[2] = { 0 }; /*read status register*/ // RMW dummy cycles: - res = QSPI_Command(READ_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); + res = QSPI_Command(READ_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + + if (res == HAL_OK) + { + memcpy(write_buffer,read_buffer,2); + + write_buffer[0] &= ~(((1<<4)-1)<<4); + write_buffer[0] |= FAST_READ_DUMMY_CYCLES << 4; + write_buffer[1] &= ~(((1<<4)-1)<<4); + write_buffer[1] |= FAST_READ_DUMMY_CYCLES << 4; + + res = QSPI_Command(WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, write_buffer, NULL, 2); + } if (res == HAL_OK) { - test_buffer[0] &= ~(((1<<4)-1)<<4); - test_buffer[0] |= FAST_READ_DUMMY_CYCLES << 4; - test_buffer[1] &= ~(((1<<4)-1)<<4); - test_buffer[1] |= FAST_READ_DUMMY_CYCLES << 4; + memset(read_buffer, 0, 2); // clear buffer before reading + res = QSPI_Command(READ_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + if (res == HAL_OK) + { + if (memcmp(read_buffer,write_buffer,2) != 0) + { + res = HAL_ERROR; + } - res = QSPI_Command(WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); + } } // RMW dummy cycles: if (res == HAL_OK) { - res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); + memset(read_buffer, 0, 2); // clear buffer before reading + res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); } if (res == HAL_OK) { - test_buffer[0] |= ((1<<2)-1)<<6; - test_buffer[0] &= ~(1 << 7); // enable Quad mode - test_buffer[1] |= ((1<<2)-1)<<6; - test_buffer[1] &= ~(1 << 7); // enable Quad mode + memcpy(write_buffer,read_buffer,2); + + write_buffer[0] |= ((1<<2)-1)<<6; + write_buffer[0] &= ~(1 << 7); // enable Quad mode + write_buffer[1] |= ((1<<2)-1)<<6; + write_buffer[1] &= ~(1 << 7); // enable Quad mode // //TODO: enable DTR // test_buffer[0] &= ~(1 << 5); // enable DTR mode // test_buffer[1] &= ~(1 << 5); // enable DTR mode - res = QSPI_Command(WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, test_buffer, 2); + DualQuadState.switchingToQuad = true; // skip auto polling + res = QSPI_Command(WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, write_buffer, NULL, 2); + DualQuadState.switchingToQuad = false; + +// if (res == HAL_OK) +// { +// DualQuadState.quadModeEnabled = true; +//// DualQuadState.dtrEnabled = true; +// } + } + + + if (res == HAL_OK) + { + memset(read_buffer, 0, 2); // clear buffer before reading + res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + if (res == HAL_OK) + { + if (memcmp(read_buffer,write_buffer,2) != 0) + { + res = HAL_ERROR; + } + else + { + DualQuadState.quadModeEnabled = true; + } + + } } + return res; } uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) { - OSPI_RegularCmdTypeDef sCommand = {}; +// OSPI_RegularCmdTypeDef sCommand = {}; + HAL_StatusTypeDef res = HAL_OK; EraseStartAddress &= (MEMORY_DUAL_SECTOR_SIZE - 1); /* Erasing Sequence -------------------------------------------------- */ - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = SECTOR_ERASE_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_4_LINES; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = EraseStartAddress; - sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_NONE; - sCommand.NbData = 0; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; while (EraseEndAddress >= EraseStartAddress) { - if (QSPI_WriteEnable() != HAL_OK) { - return HAL_ERROR; + res = QSPI_WriteEnable(); + if (res != HAL_OK) + { + break; } - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) - != HAL_OK) { - return HAL_ERROR; + res = QSPI_Command(SECTOR_ERASE_CMD, true, EraseStartAddress, NULL, NULL, 0); + + if (res != HAL_OK) + { + break; } + EraseStartAddress += MEMORY_DUAL_SECTOR_SIZE; - if (QSPI_AutoPollingMemReady() != HAL_OK) { - return HAL_ERROR; + res = QSPI_AutoPollingMemReady(); + + if (res != HAL_OK) + { + break; } } - return HAL_OK; + return res; } uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) @@ -580,21 +639,21 @@ uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_s sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = 0x0B; // fast read - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = address; - sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; + sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_4_LINES; + sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = buffer_size; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD; + sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -631,20 +690,20 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = QUAD_IN_FAST_PROG_CMD; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = address; - sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; + sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_4_LINES; + sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = current_size; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -704,24 +763,20 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; sCommand.Instruction = 0xEB;// QUAD INPUT/OUTPUT FAST READ; sCommand.FlashId = 0; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_4_LINES; + sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.AddressMode = HAL_OSPI_ADDRESS_4_LINES; + sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.DataMode = HAL_OSPI_DATA_4_LINES; - sCommand.DummyCycles = DUMMY_CLOCK_CYCLES_READ_QUAD; + sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; -// sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_ENABLE; -// sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; -// sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; - - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; + sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); @@ -766,14 +821,15 @@ static uint8_t QSPI_Command(uint8_t command, sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = command; - sCommand.InstructionMode = HAL_OSPI_INSTRUCTION_1_LINE; + + sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; if (hasAddress) { - sCommand.AddressMode = HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.Address = address; // todo check if this is correct if ((command == 0xE2) || (command == 0xE3)) // these commands are the only ones with 4 byte address @@ -784,7 +840,7 @@ static uint8_t QSPI_Command(uint8_t command, { sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; } - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; } else { @@ -804,9 +860,10 @@ static uint8_t QSPI_Command(uint8_t command, { if ((writeData == NULL) != (readData == NULL)) { - sCommand.DataMode = HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = dataLength; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + } else { @@ -843,11 +900,15 @@ static uint8_t QSPI_Command(uint8_t command, if (res == HAL_OK) { //Configure automatic polling mode to wait for end of program - res = QSPI_AutoPollingMemReady(); + if (DualQuadState.switchingToQuad == false) + { + res = QSPI_AutoPollingMemReady(); + } } } else { + //memset(readData, 0, dataLength); // clear buffer before reading res = HAL_OSPI_Receive(&hospi1, readData, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); } } @@ -876,6 +937,12 @@ static uint8_t QSPI_ResetChip() res = QSPI_Command(RESET_EXECUTE_CMD, false, 0, NULL, NULL, 0); } + if (res == HAL_OK) + { + DualQuadState.quadModeEnabled = false; + DualQuadState.dtrEnabled = false; + } + return res; } From 27d563fec119d3d0d235fb80c9db5627f7b9dab6 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 13 Jan 2023 11:04:20 +0100 Subject: [PATCH 19/49] intermediate commit, write enable is now set before writing configuration registers --- Demo_Project_H7A3/Core/Src/main.c | 4 +- Demo_Project_H7A3/Core/Src/octospi.c | 71 ++++++++++++++++------------ 2 files changed, 45 insertions(+), 30 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index c262e75..6525541 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -97,6 +97,7 @@ int main(void) /* USER CODE BEGIN 2 */ uint32_t var = 0; + uint32_t address; res = CSP_QUADSPI_Init(); @@ -123,7 +124,8 @@ int main(void) // } } - res = CSP_QSPI_ReadMemory(buffer_test_read, 0, sizeof(buffer_test_read)); + address = MEMORY_DUAL_SECTOR_SIZE*3; + res = CSP_QSPI_ReadMemory(buffer_test_read, address, sizeof(buffer_test_read)); if (res != HAL_OK) { while (1); //breakpoint - error detected diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 115fd0e..e21856b 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -45,8 +45,6 @@ #define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 #define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 - - //#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // todo: check which one is this? sometimes 0,4,8 or 10 #define FAST_READ_DUMMY_CYCLES 10 @@ -55,6 +53,9 @@ #define STATUS_REG_WIP_MASK (1UL<<0) #define STATUS_REG_WEL_MASK (1UL<<1) + +//#define USE_DDR + static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); static uint8_t QSPI_Configuration(void); @@ -97,6 +98,7 @@ typedef struct bool quadModeEnabled; // 4-4-4 if true, 1-1-1 if false bool dtrEnabled; // dtr for command, address and data bool switchingToQuad; + uint8_t dummyCycles; } DualQuadStateType; @@ -104,7 +106,6 @@ DualQuadStateType; static DualQuadStateType DualQuadState; -//#define USE_DDR /* USER CODE END 0 */ @@ -326,17 +327,11 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_ReadChipId(); } - if (res == HAL_OK) { res = QSPI_AutoPollingMemReady(); } - if (res == HAL_OK) - { - res = QSPI_WriteEnable(); - } - if (res == HAL_OK) { res = QSPI_Configuration(); @@ -508,9 +503,14 @@ static uint8_t QSPI_Configuration(void) uint8_t write_buffer[2] = { 0 }; /*read status register*/ - // RMW dummy cycles: + // R-M-W dummy cycles: res = QSPI_Command(READ_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + if (res == HAL_OK) + { + res = QSPI_WriteEnable(); + } + if (res == HAL_OK) { memcpy(write_buffer,read_buffer,2); @@ -533,11 +533,10 @@ static uint8_t QSPI_Configuration(void) { res = HAL_ERROR; } - } } - // RMW dummy cycles: + // R-M-W dummy cycles: if (res == HAL_OK) { @@ -545,6 +544,11 @@ static uint8_t QSPI_Configuration(void) res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); } + if (res == HAL_OK) + { + res = QSPI_WriteEnable(); + } + if (res == HAL_OK) { memcpy(write_buffer,read_buffer,2); @@ -554,35 +558,41 @@ static uint8_t QSPI_Configuration(void) write_buffer[1] |= ((1<<2)-1)<<6; write_buffer[1] &= ~(1 << 7); // enable Quad mode -// //TODO: enable DTR -// test_buffer[0] &= ~(1 << 5); // enable DTR mode -// test_buffer[1] &= ~(1 << 5); // enable DTR mode +#ifdef USE_DDR + write_buffer[0] &= ~(1 << 5); // enable DTR mode + write_buffer[1] &= ~(1 << 5); // enable DTR mode +#endif DualQuadState.switchingToQuad = true; // skip auto polling res = QSPI_Command(WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, write_buffer, NULL, 2); DualQuadState.switchingToQuad = false; -// if (res == HAL_OK) -// { -// DualQuadState.quadModeEnabled = true; -//// DualQuadState.dtrEnabled = true; -// } + if (res == HAL_OK) + { + //DualQuadState.quadModeEnabled = true; +#ifdef USE_DDR + DualQuadState.dtrEnabled = true; +#endif + } } - + // TODO: find out why this doesn't work if (res == HAL_OK) { - memset(read_buffer, 0, 2); // clear buffer before reading - res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + while(1) + { +// memset(read_buffer, 0, 2); // clear buffer before reading + res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + } if (res == HAL_OK) { if (memcmp(read_buffer,write_buffer,2) != 0) { - res = HAL_ERROR; +// res = HAL_ERROR; } else { - DualQuadState.quadModeEnabled = true; +// DualQuadState.quadModeEnabled = true; } } @@ -880,7 +890,7 @@ static uint8_t QSPI_Command(uint8_t command, //todo set FAST_READ_DUMMY_CYCLES - sCommand.DummyCycles = 0; + sCommand.DummyCycles = DualQuadState.dummyCycles; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -899,11 +909,14 @@ static uint8_t QSPI_Command(uint8_t command, if (res == HAL_OK) { - //Configure automatic polling mode to wait for end of program - if (DualQuadState.switchingToQuad == false) + //Configure automatic polling mode to wait for end of program or write + if (DualQuadState.switchingToQuad) { - res = QSPI_AutoPollingMemReady(); + DualQuadState.quadModeEnabled = true; + DualQuadState.switchingToQuad = false; } + + res = QSPI_AutoPollingMemReady(); } } else From 4edec79b8801d2f1955531cac9bcbba8c48ab12f Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 13 Jan 2023 11:57:16 +0100 Subject: [PATCH 20/49] ID reading fails in QSPI protocol (0x70 instead of 0x20) --- Demo_Project_H7A3/Core/Src/octospi.c | 127 ++++++++++++++------------- 1 file changed, 65 insertions(+), 62 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index e21856b..c83a7b3 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -38,7 +38,7 @@ #define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE #define RESET_ENABLE_CMD 0x66 // RESET ENABLE #define RESET_EXECUTE_CMD 0x99 // RESET MEMORY -#define READ_ID_CMD 0x9E +#define READ_ID_CMD 0xAF // MULTIPLE I/O READ ID (supports 1-1-1,2-2-2, 4-4-4 #define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 #define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 @@ -95,10 +95,13 @@ typedef struct { OspiErrorCodeType latestError; - bool quadModeEnabled; // 4-4-4 if true, 1-1-1 if false - bool dtrEnabled; // dtr for command, address and data bool switchingToQuad; - uint8_t dummyCycles; + bool quadProtocolEnabled; // 4-4-4 if true, 1-1-1 if false + + bool switchingToDtr; + bool dtrProtocolEnabled; // dtr for command, address and data + +// uint8_t dummyCycles; } DualQuadStateType; @@ -342,6 +345,12 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_ReadChipId(); } + if (res != HAL_OK) + { + res = QSPI_ReadChipId(); + } + + if (res != HAL_OK) { @@ -370,13 +379,13 @@ uint8_t CSP_QSPI_Erase_Chip(void) sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = CHIP_ERASE_CMD; - sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = 0; sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; @@ -409,21 +418,21 @@ static uint8_t QSPI_AutoPollingSetup(void) sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = READ_STATUS_REG_CMD; - sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; sCommand.Address = 0; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = 2; // todo check if this is correct - sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -561,40 +570,30 @@ static uint8_t QSPI_Configuration(void) #ifdef USE_DDR write_buffer[0] &= ~(1 << 5); // enable DTR mode write_buffer[1] &= ~(1 << 5); // enable DTR mode + DualQuadState.switchingToDtr = true; #endif DualQuadState.switchingToQuad = true; // skip auto polling res = QSPI_Command(WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, write_buffer, NULL, 2); DualQuadState.switchingToQuad = false; - - if (res == HAL_OK) - { - //DualQuadState.quadModeEnabled = true; #ifdef USE_DDR - DualQuadState.dtrEnabled = true; + DualQuadState.switchingToDtr = false; #endif - } } // TODO: find out why this doesn't work if (res == HAL_OK) { - while(1) - { -// memset(read_buffer, 0, 2); // clear buffer before reading - res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); - } + + memset(read_buffer, 0, 2); // clear buffer before reading + res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); + if (res == HAL_OK) { if (memcmp(read_buffer,write_buffer,2) != 0) { -// res = HAL_ERROR; - } - else - { -// DualQuadState.quadModeEnabled = true; + res = HAL_ERROR; } - } } @@ -649,20 +648,20 @@ uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_s sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = 0x0B; // fast read - sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = address; - sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = buffer_size; - sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -700,20 +699,20 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = QUAD_IN_FAST_PROG_CMD; - sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = address; - sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = current_size; - sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -723,10 +722,6 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b sCommand.Address = current_addr; sCommand.NbData = current_size; - if (current_size == 0) { - return HAL_OK; - } - /* Enable write operations */ if (QSPI_WriteEnable() != HAL_OK) { return HAL_ERROR; @@ -757,7 +752,7 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); current_size = (buffer_size > bytesRemainingInPage) ? bytesRemainingInPage : buffer_size; - } while (buffer_size); + } while (current_size); return HAL_OK; } @@ -773,18 +768,18 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; sCommand.Instruction = 0xEB;// QUAD INPUT/OUTPUT FAST READ; sCommand.FlashId = 0; - sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? @@ -832,14 +827,14 @@ static uint8_t QSPI_Command(uint8_t command, sCommand.FlashId = 0; //only applies if Dualquad is disabled sCommand.Instruction = command; - sCommand.InstructionMode = DualQuadState.quadModeEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; if (hasAddress) { - sCommand.AddressMode = DualQuadState.quadModeEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; + sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.Address = address; // todo check if this is correct if ((command == 0xE2) || (command == 0xE3)) // these commands are the only ones with 4 byte address @@ -850,7 +845,7 @@ static uint8_t QSPI_Command(uint8_t command, { sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; } - sCommand.AddressDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; } else { @@ -870,9 +865,9 @@ static uint8_t QSPI_Command(uint8_t command, { if ((writeData == NULL) != (readData == NULL)) { - sCommand.DataMode = DualQuadState.quadModeEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = dataLength; - sCommand.DataDtrMode = DualQuadState.dtrEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; } else @@ -890,7 +885,7 @@ static uint8_t QSPI_Command(uint8_t command, //todo set FAST_READ_DUMMY_CYCLES - sCommand.DummyCycles = DualQuadState.dummyCycles; + sCommand.DummyCycles = 0; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -909,13 +904,21 @@ static uint8_t QSPI_Command(uint8_t command, if (res == HAL_OK) { - //Configure automatic polling mode to wait for end of program or write + //write succeeded so if this write was to a config register it should update protocol settings: + if (DualQuadState.switchingToQuad) { - DualQuadState.quadModeEnabled = true; + DualQuadState.quadProtocolEnabled = true; DualQuadState.switchingToQuad = false; } + if (DualQuadState.switchingToDtr) + { + DualQuadState.dtrProtocolEnabled = true; + DualQuadState.switchingToDtr = false; + } + + //Configure automatic polling mode to wait for end of program or write res = QSPI_AutoPollingMemReady(); } } @@ -952,8 +955,8 @@ static uint8_t QSPI_ResetChip() if (res == HAL_OK) { - DualQuadState.quadModeEnabled = false; - DualQuadState.dtrEnabled = false; + DualQuadState.quadProtocolEnabled = false; + DualQuadState.dtrProtocolEnabled = false; } return res; From c2a35f1514cfbe6df080c9b7b06c9da6dda50937 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 13 Jan 2023 14:43:54 +0100 Subject: [PATCH 21/49] STR command + DTR address/data works --- Demo_Project_H7A3/Core/Src/octospi.c | 42 ++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 6 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index c83a7b3..b652e5e 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -54,7 +54,9 @@ #define STATUS_REG_WEL_MASK (1UL<<1) -//#define USE_DDR +//#define USE_COMMAND_DTR + +#define USE_READ_DTR static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); @@ -110,6 +112,19 @@ DualQuadStateType; static DualQuadStateType DualQuadState; +static HAL_StatusTypeDef HAL_OSPI_InitOveruled(OSPI_HandleTypeDef *hospi) +{ +#ifdef USE_COMMAND_DTR + //hospi->Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_USED; +#else + hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE; +#endif + + return HAL_OSPI_Init(hospi); +} + +#define HAL_OSPI_Init HAL_OSPI_InitOveruled + /* USER CODE END 0 */ OSPI_HandleTypeDef hospi1; @@ -567,7 +582,7 @@ static uint8_t QSPI_Configuration(void) write_buffer[1] |= ((1<<2)-1)<<6; write_buffer[1] &= ~(1 << 7); // enable Quad mode -#ifdef USE_DDR +#ifdef USE_COMMAND_DTR write_buffer[0] &= ~(1 << 5); // enable DTR mode write_buffer[1] &= ~(1 << 5); // enable DTR mode DualQuadState.switchingToDtr = true; @@ -576,7 +591,7 @@ static uint8_t QSPI_Configuration(void) DualQuadState.switchingToQuad = true; // skip auto polling res = QSPI_Command(WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, write_buffer, NULL, 2); DualQuadState.switchingToQuad = false; -#ifdef USE_DDR +#ifdef USE_COMMAND_DTR DualQuadState.switchingToDtr = false; #endif } @@ -647,21 +662,36 @@ uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_s sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = 0x0B; // fast read + +#ifdef USE_READ_DTR + sCommand.Instruction = 0x0D; // DTR FAST READ +#else + sCommand.Instruction = 0x0B; // FAST READ +#endif sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; sCommand.Address = address; sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; +// sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; +#ifdef USE_READ_DTR + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; +#else + sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; +#endif sCommand.AlternateBytes = 0; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.AlternateBytesSize = 0; sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommand.NbData = buffer_size; - sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; +// sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; +#ifdef USE_READ_DTR + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; +#else + sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; +#endif sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; From 7cd85f39c3732de33f0c819e090f3d8fae86ca59 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 13 Jan 2023 15:19:38 +0100 Subject: [PATCH 22/49] intermediate commit: memory mapped works, write for 1st sector fails --- Demo_Project_H7A3/Core/Src/main.c | 16 ++++++++-------- Demo_Project_H7A3/Core/Src/octospi.c | 14 ++++++++++---- 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 6525541..82a4ffe 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -105,7 +105,7 @@ int main(void) for (var = 0; var < MEMORY_DUAL_SECTOR_SIZE; var++) { - buffer_test[var] = (var & 0xff); + buffer_test[var] = (var+1) & 0xff; } @@ -117,14 +117,14 @@ int main(void) while (1); //breakpoint - error detected } -// res = CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); -// if (res != HAL_OK) -// { -// while (1); //breakpoint - error detected -// } + res = CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); + if (res != HAL_OK) + { + while (1); //breakpoint - error detected + } } - address = MEMORY_DUAL_SECTOR_SIZE*3; + address = MEMORY_DUAL_SECTOR_SIZE*(NUMBER_OF_SECTORS_TO_TEST-1); res = CSP_QSPI_ReadMemory(buffer_test_read, address, sizeof(buffer_test_read)); if (res != HAL_OK) { @@ -139,7 +139,7 @@ int main(void) for (var = 0; var < NUMBER_OF_SECTORS_TO_TEST; var++) { - if (memcmp(buffer_test, (uint8_t*) (0x90000000 + var * MEMORY_DUAL_SECTOR_SIZE), MEMORY_DUAL_SECTOR_SIZE) != 0) + if (memcmp(buffer_test, (uint8_t*) (0x90000000 + var * MEMORY_DUAL_SECTOR_SIZE), 100) != 0) { while (1); //breakpoint - error detected - otherwise QSPI works properly } diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index b652e5e..5a25694 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -796,14 +796,16 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) /* Initialize memory-mapped mode for read operations */ sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; - sCommand.Instruction = 0xEB;// QUAD INPUT/OUTPUT FAST READ; + sCommand.Instruction = 0x0B;//0xEB;// QUAD INPUT/OUTPUT FAST READ; sCommand.FlashId = 0; sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommand.Address = 0; sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommand.NbData = 1; sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -811,7 +813,9 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? + sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); @@ -824,8 +828,10 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) /* Initialize memory-mapped mode for write operations */ sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; - sCommand.Instruction = 0x32; // QUAD INPUT FAST PROGRAM Command - sCommand.DummyCycles = 0; + sCommand.Instruction = 0x32; // QUAD INPUT FAST PROGRAM Command ??? + sCommand.DummyCycles = 0; // ? + sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); if (res !=HAL_OK) From a0e5a9fdffe5aa557dcd816350162e641203fe0a Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Fri, 13 Jan 2023 16:18:55 +0100 Subject: [PATCH 23/49] write doesn't work after erase --- Demo_Project_H7A3/Core/Src/main.c | 23 +++++++----- Demo_Project_H7A3/Core/Src/octospi.c | 39 +++++++++++++------- Demo_Project_H7A3/Custom_Loader Debug.launch | 2 +- 3 files changed, 40 insertions(+), 24 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 82a4ffe..44abde4 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -58,7 +58,7 @@ void SystemClock_Config(void); static uint8_t buffer_test[MEMORY_DUAL_SECTOR_SIZE]; static uint8_t buffer_test_read[MEMORY_DUAL_SECTOR_SIZE]; -#define NUMBER_OF_SECTORS_TO_TEST 2 +#define NUMBER_OF_SECTORS_TO_TEST 4 /* USER CODE END 0 */ /** @@ -96,35 +96,38 @@ int main(void) MX_OCTOSPI1_Init(); /* USER CODE BEGIN 2 */ - uint32_t var = 0; + uint32_t sectorIndex = 0; uint32_t address; res = CSP_QUADSPI_Init(); while(!testFlash); // make high with debugger to proceed to test - for (var = 0; var < MEMORY_DUAL_SECTOR_SIZE; var++) + for (sectorIndex = 0; sectorIndex < MEMORY_DUAL_SECTOR_SIZE; sectorIndex++) { - buffer_test[var] = (var+1) & 0xff; + buffer_test[sectorIndex] = (sectorIndex+1) & 0xff; } - for (var = 0; var < NUMBER_OF_SECTORS_TO_TEST; var++) + for (sectorIndex = 0; sectorIndex < NUMBER_OF_SECTORS_TO_TEST; sectorIndex++) { - res = CSP_QSPI_EraseSector(var * MEMORY_DUAL_SECTOR_SIZE, (var + 1) * MEMORY_DUAL_SECTOR_SIZE - 1); + res = CSP_QSPI_EraseSector(sectorIndex * MEMORY_DUAL_SECTOR_SIZE, (sectorIndex + 1) * MEMORY_DUAL_SECTOR_SIZE - 1); if (res != HAL_OK) { while (1); //breakpoint - error detected } - res = CSP_QSPI_WriteMemory(buffer_test, var * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); + HAL_Delay(10); // todo remove magic number + + buffer_test[0] = sectorIndex+1; + res = CSP_QSPI_WriteMemory(buffer_test, sectorIndex * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); if (res != HAL_OK) { while (1); //breakpoint - error detected } } - address = MEMORY_DUAL_SECTOR_SIZE*(NUMBER_OF_SECTORS_TO_TEST-1); + address = 0; res = CSP_QSPI_ReadMemory(buffer_test_read, address, sizeof(buffer_test_read)); if (res != HAL_OK) { @@ -137,9 +140,9 @@ int main(void) while (1); //breakpoint - error detected } - for (var = 0; var < NUMBER_OF_SECTORS_TO_TEST; var++) + for (sectorIndex = 0; sectorIndex < NUMBER_OF_SECTORS_TO_TEST; sectorIndex++) { - if (memcmp(buffer_test, (uint8_t*) (0x90000000 + var * MEMORY_DUAL_SECTOR_SIZE), 100) != 0) + if (memcmp(buffer_test, (uint8_t*) (0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE), 100) != 0) { while (1); //breakpoint - error detected - otherwise QSPI works properly } diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 5a25694..590cf89 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -117,7 +117,8 @@ static HAL_StatusTypeDef HAL_OSPI_InitOveruled(OSPI_HandleTypeDef *hospi) #ifdef USE_COMMAND_DTR //hospi->Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_USED; #else - hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE; +// hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE; + hospi->Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_USED; #endif return HAL_OSPI_Init(hospi); @@ -355,15 +356,15 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_Configuration(); } - if (res == HAL_OK) - { - res = QSPI_ReadChipId(); - } - - if (res != HAL_OK) - { - res = QSPI_ReadChipId(); - } +// if (res == HAL_OK) +// { +// res = QSPI_ReadChipId(); +// } +// +// if (res != HAL_OK) +// { +// res = QSPI_ReadChipId(); +// } @@ -728,7 +729,7 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = QUAD_IN_FAST_PROG_CMD; + sCommand.Instruction = 0x02; // page program sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; @@ -826,9 +827,9 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) } - /* Initialize memory-mapped mode for write operations */ +// /* Initialize memory-mapped mode for write operations */ sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; - sCommand.Instruction = 0x32; // QUAD INPUT FAST PROGRAM Command ??? + sCommand.Instruction = 0;// 0x32; // QUAD INPUT FAST PROGRAM Command ??? sCommand.DummyCycles = 0; // ? sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? @@ -839,6 +840,18 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) Error_Handler(); } + // sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; + // sCommand.Instruction = 0x32; // QUAD INPUT FAST PROGRAM Command ??? + // sCommand.DummyCycles = 0; // ? + // sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? + // + // res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + // + // if (res !=HAL_OK) + // { + // Error_Handler(); + // } + sMemMappedCfg.TimeOutActivation = HAL_OSPI_TIMEOUT_COUNTER_DISABLE; sMemMappedCfg.TimeOutPeriod = 0; diff --git a/Demo_Project_H7A3/Custom_Loader Debug.launch b/Demo_Project_H7A3/Custom_Loader Debug.launch index 93a0fb6..d05ef97 100644 --- a/Demo_Project_H7A3/Custom_Loader Debug.launch +++ b/Demo_Project_H7A3/Custom_Loader Debug.launch @@ -73,6 +73,6 @@ - + From ac8b8ef5b70faba1bac4b64cff25d78ef5a54d42 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 09:48:45 +0100 Subject: [PATCH 24/49] fixed erase function bug and check --- Demo_Project_H7A3/Core/Src/main.c | 2 +- Demo_Project_H7A3/Core/Src/octospi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 44abde4..b6dcd1c 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -142,7 +142,7 @@ int main(void) for (sectorIndex = 0; sectorIndex < NUMBER_OF_SECTORS_TO_TEST; sectorIndex++) { - if (memcmp(buffer_test, (uint8_t*) (0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE), 100) != 0) + if (memcmp(buffer_test+1, (uint8_t*) (0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE+1), 100-1) != 0) { while (1); //breakpoint - error detected - otherwise QSPI works properly } diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 590cf89..496a49e 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -622,7 +622,7 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres // OSPI_RegularCmdTypeDef sCommand = {}; HAL_StatusTypeDef res = HAL_OK; - EraseStartAddress &= (MEMORY_DUAL_SECTOR_SIZE - 1); + EraseStartAddress &= ~(MEMORY_DUAL_SECTOR_SIZE - 1); /* Erasing Sequence -------------------------------------------------- */ From 82348b5cec57b20c2d5a0e9dffa621ec9f46626e Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 11:10:26 +0100 Subject: [PATCH 25/49] intermediate commit: some refactoring --- Demo_Project_H7A3/Core/Src/main.c | 4 +- Demo_Project_H7A3/Core/Src/octospi.c | 224 +++++++++++---------------- 2 files changed, 95 insertions(+), 133 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index b6dcd1c..718171b 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -142,7 +142,9 @@ int main(void) for (sectorIndex = 0; sectorIndex < NUMBER_OF_SECTORS_TO_TEST; sectorIndex++) { - if (memcmp(buffer_test+1, (uint8_t*) (0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE+1), 100-1) != 0) + address = 0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE; + if (((*(const uint8_t*)address) == sectorIndex) && + (memcmp(buffer_test+1, (uint8_t*) (address+1), MEMORY_DUAL_SECTOR_SIZE-1) != 0)) { while (1); //breakpoint - error detected - otherwise QSPI works properly } diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 496a49e..7e77855 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -27,12 +27,11 @@ //MT25TL256 commands #define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE #define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER -#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER +//#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER #define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE -#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib) +#define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib total) #define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM -//#define READ_CONFIGURATION_REG_CMD 0x15 // page 50 table 24? -//#define QUAD_READ_IO_CMD 0xEC // ? + #define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ #define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE #define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE @@ -40,6 +39,9 @@ #define RESET_EXECUTE_CMD 0x99 // RESET MEMORY #define READ_ID_CMD 0xAF // MULTIPLE I/O READ ID (supports 1-1-1,2-2-2, 4-4-4 +//DTR commands (commands with command in STR and with address and data in DTR when device is not in DTR mode) +#define DTR_FAST_READ_CMD 0x0D // DTR FAST READ, TODO: use this + #define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 #define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 #define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 @@ -53,10 +55,11 @@ #define STATUS_REG_WIP_MASK (1UL<<0) #define STATUS_REG_WEL_MASK (1UL<<1) +#define MT25TL256_MAX_CLK (90*1000*1000) // TODO use this -//#define USE_COMMAND_DTR -#define USE_READ_DTR +//#define USE_COMMAND_DTR // if enabled dtr for command phase + address + data will be used +#define USE_READ_DTR // if enabled static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); @@ -64,6 +67,15 @@ static uint8_t QSPI_Configuration(void); static uint8_t QSPI_ResetChip(void); static uint8_t QSPI_ReadChipId(void); + +static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, + uint8_t command, + bool hasAddress, + uint32_t address, + uint8_t dataLength, + bool write + ); + static uint8_t QSPI_Command(uint8_t command, bool hasAddress, uint32_t address, @@ -383,47 +395,7 @@ uint8_t CSP_QUADSPI_Init(void) { uint8_t CSP_QSPI_Erase_Chip(void) { - OSPI_RegularCmdTypeDef sCommand = {}; - - - if (QSPI_WriteEnable() != HAL_OK) { - return HAL_ERROR; - } - - /* Erasing Sequence --------------------------------- */ - - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = CHIP_ERASE_CMD; - sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = 0; - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = HAL_OSPI_DATA_NONE; - sCommand.NbData = 0; //? - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - - - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) - != HAL_OK) { - return HAL_ERROR; - } - - if (QSPI_AutoPollingMemReady() != HAL_OK) { - return HAL_ERROR; - } - - return HAL_OK; + return QSPI_Command(CHIP_ERASE_CMD, false, 0, NULL, NULL, 0); } static uint8_t QSPI_AutoPollingSetup(void) @@ -431,27 +403,7 @@ static uint8_t QSPI_AutoPollingSetup(void) OSPI_RegularCmdTypeDef sCommand = {0}; HAL_StatusTypeDef res = HAL_OK; - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = READ_STATUS_REG_CMD; - sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; - - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.Address = 0; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; - sCommand.NbData = 2; // todo check if this is correct - sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + res = QSPI_InitCommandStruct(&sCommand, READ_STATUS_REG_CMD, false, 0, 2, false); if (res == HAL_OK) { @@ -840,18 +792,6 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) Error_Handler(); } - // sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; - // sCommand.Instruction = 0x32; // QUAD INPUT FAST PROGRAM Command ??? - // sCommand.DummyCycles = 0; // ? - // sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? - // - // res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - // - // if (res !=HAL_OK) - // { - // Error_Handler(); - // } - sMemMappedCfg.TimeOutActivation = HAL_OSPI_TIMEOUT_COUNTER_DISABLE; sMemMappedCfg.TimeOutPeriod = 0; @@ -860,83 +800,108 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) return res; } -static uint8_t QSPI_Command(uint8_t command, - bool hasAddress, - uint32_t address, - const uint8_t* writeData, - uint8_t* readData, - size_t dataLength) +static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, + uint8_t command, + bool hasAddress, + uint32_t address, + uint8_t dataLength, + bool write + ) { - // todo add line width option and dtr option - - OSPI_RegularCmdTypeDef sCommand = {0}; HAL_StatusTypeDef res = HAL_OK; - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = command; + //TODO check params - sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; + sCommandPtr->OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommandPtr->FlashId = 0; //only applies if Dualquad is disabled + sCommandPtr->Instruction = command; + sCommandPtr->InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; + sCommandPtr->InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; + sCommandPtr->InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; if (hasAddress) { - sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; - sCommand.Address = address; // todo check if this is correct + sCommandPtr->AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; + sCommandPtr->Address = address; // todo check if this is correct if ((command == 0xE2) || (command == 0xE3)) // these commands are the only ones with 4 byte address { - sCommand.AddressSize = HAL_OSPI_ADDRESS_32_BITS; + sCommandPtr->AddressSize = HAL_OSPI_ADDRESS_32_BITS; } else { - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommandPtr->AddressSize = HAL_OSPI_ADDRESS_24_BITS; } - sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommandPtr->AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; } else { - sCommand.AddressMode = HAL_OSPI_ADDRESS_NONE; - sCommand.Address = 0; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; + sCommandPtr->AddressMode = HAL_OSPI_ADDRESS_NONE; + sCommandPtr->Address = 0; + sCommandPtr->AddressSize = HAL_OSPI_ADDRESS_24_BITS; + sCommandPtr->AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; } - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + sCommandPtr->AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; + sCommandPtr->AlternateBytes = 0; + sCommandPtr->AlternateBytesSize = 0; + sCommandPtr->AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; + if (dataLength > 0) + { + sCommandPtr->DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; + sCommandPtr->NbData = dataLength; + sCommandPtr->DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + } + else + { + sCommandPtr->DataMode = HAL_OSPI_DATA_NONE; + sCommandPtr->NbData = 0; + sCommandPtr->DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + } + + //TODO set FAST_READ_DUMMY_CYCLES + + + sCommandPtr->DummyCycles = 0; + sCommandPtr->DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used + sCommandPtr->SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; + + return res; +} + +static uint8_t QSPI_Command(uint8_t command, + bool hasAddress, + uint32_t address, + const uint8_t* writeData, + uint8_t* readData, + size_t dataLength) +{ + // todo add line width option and dtr option + + OSPI_RegularCmdTypeDef sCommand = {0}; + HAL_StatusTypeDef res = HAL_OK; + if (dataLength > 0) { if ((writeData == NULL) != (readData == NULL)) { - sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; - sCommand.NbData = dataLength; - sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; - + res = QSPI_InitCommandStruct(&sCommand, command, hasAddress, address, dataLength, writeData != NULL); } else { + // number of non-zero pointers not equal to 1 res = HAL_ERROR; } } else { - sCommand.DataMode = HAL_OSPI_DATA_NONE; - sCommand.NbData = 0; - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; + res = QSPI_InitCommandStruct(&sCommand, command, hasAddress, address, 0, false); } - //todo set FAST_READ_DUMMY_CYCLES - - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; if (res == HAL_OK) { @@ -1017,28 +982,23 @@ static uint8_t QSPI_ReadChipId(void) { uint8_t test_buffer[3*2] = { 0 }; HAL_StatusTypeDef res = HAL_OK; + uint8_t i; res = QSPI_Command(READ_ID_CMD, false, 0, NULL, test_buffer, sizeof(test_buffer)); - if (res == HAL_OK) + for(i=0;i<2;++i) { //even bytes are first die, odd bytes are second die - if ( (test_buffer[0*2+0] == test_buffer[0*2+1]) && - (test_buffer[1*2+0] == test_buffer[1*2+1]) && - (test_buffer[2*2+0] == test_buffer[2*2+1]) && - (test_buffer[0*2+0] == 0x20) && - (test_buffer[1*2+0] == 0xBA) && - (test_buffer[2*2+0] == 0x18)) - { - // correct id - } - else + if ((test_buffer[0*2+i] != 0x20) || + (test_buffer[1*2+i] != 0xBA) || + (test_buffer[2*2+i] != 0x18)) { + //incorrect id res = HAL_ERROR; + break; } } - return res; } From 694a6cd6bc610ea3b7b5c9f06720857af1366ff8 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 14:04:03 +0100 Subject: [PATCH 26/49] intermediate commit --- Demo_Project_H7A3/Core/Src/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 718171b..2256985 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -101,7 +101,7 @@ int main(void) res = CSP_QUADSPI_Init(); - while(!testFlash); // make high with debugger to proceed to test + while(!testFlash); // set to true with debugger to proceed to test for (sectorIndex = 0; sectorIndex < MEMORY_DUAL_SECTOR_SIZE; sectorIndex++) { @@ -142,9 +142,9 @@ int main(void) for (sectorIndex = 0; sectorIndex < NUMBER_OF_SECTORS_TO_TEST; sectorIndex++) { + buffer_test[0] = sectorIndex+1; address = 0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE; - if (((*(const uint8_t*)address) == sectorIndex) && - (memcmp(buffer_test+1, (uint8_t*) (address+1), MEMORY_DUAL_SECTOR_SIZE-1) != 0)) + if (memcmp(buffer_test, (uint8_t*) (address), MEMORY_DUAL_SECTOR_SIZE) != 0) { while (1); //breakpoint - error detected - otherwise QSPI works properly } From 2d03658c55e4d052927dc954df4478846d9035e3 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 14:20:43 +0100 Subject: [PATCH 27/49] refactored CSP_QSPI_WriteMemory --- Demo_Project_H7A3/Core/Src/octospi.c | 108 +++++++++++++++++---------- 1 file changed, 68 insertions(+), 40 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 7e77855..5c782c9 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -29,6 +29,7 @@ #define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER //#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER #define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE +#define PAGE_PROGRAM_CMD 0x02 // PAGE PROGRAM, program 1-256 bytes (cannot cross page boundary) #define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib total) #define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM @@ -72,7 +73,7 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, uint8_t command, bool hasAddress, uint32_t address, - uint8_t dataLength, + size_t dataLength, bool write ); @@ -664,10 +665,12 @@ uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_s uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) { - OSPI_RegularCmdTypeDef sCommand = {}; +// OSPI_RegularCmdTypeDef sCommand = {}; +// OSPI_RegularCmdTypeDef sCommand2 = {}; uint32_t current_size; //number of bytes to write in current operation uint32_t current_addr; //start address to write to in current operation uint32_t bytesRemainingInPage; + HAL_StatusTypeDef res = HAL_OK; //todo check size in command since half the data goes to one die and half the data goes to the other die @@ -679,54 +682,79 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b /* Initialize the address variables */ - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - sCommand.Instruction = 0x02; // page program - sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = address; - sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; - sCommand.NbData = current_size; - sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; - sCommand.DummyCycles = 0; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; +// sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? +// sCommand.FlashId = 0; //only applies if Dualquad is disabled +// sCommand.Instruction = PAGE_PROGRAM_CMD; // page program +// sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; +// sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; +// sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; +// sCommand.Address = address; +// sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; +// sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; +// sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; +// sCommand.AlternateBytes = 0; +// sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; +// sCommand.AlternateBytesSize = 0; +// sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; +// sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; +// sCommand.NbData = current_size; +// sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; +// sCommand.DummyCycles = 0; +// sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used +// sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; +// +// sCommand.Address = current_addr; +// sCommand.NbData = current_size; + +// QSPI_InitCommandStruct(&sCommand, PAGE_PROGRAM_CMD, true, current_addr, current_size, true); + +// QSPI_InitCommandStruct(&sCommand2, PAGE_PROGRAM_CMD, true, current_addr, current_size, true); + +// uint8_t command, +// bool hasAddress, +// uint32_t address, +// uint8_t dataLength, +// bool write /* Perform the write page by page */ do { - sCommand.Address = current_addr; - sCommand.NbData = current_size; +// sCommand.Address = current_addr; +// sCommand.NbData = current_size; /* Enable write operations */ - if (QSPI_WriteEnable() != HAL_OK) { - return HAL_ERROR; + res = QSPI_WriteEnable(); + if (res != HAL_OK) + { + break; } - /* Configure the command */ - if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) - != HAL_OK) { - return HAL_ERROR; - } +// /* Configure the command */ +// if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) +// != HAL_OK) { +// +// return HAL_ERROR; +// } +// +// /* Transmission of the data */ +// if (HAL_OSPI_Transmit(&hospi1, (uint8_t*)buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { +// return HAL_ERROR; +// } +// +// /* Configure automatic polling mode to wait for end of program */ +// if (QSPI_AutoPollingMemReady() != HAL_OK) { +// return HAL_ERROR; +// } - /* Transmission of the data */ - if (HAL_OSPI_Transmit(&hospi1, (uint8_t*)buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { - return HAL_ERROR; - } - /* Configure automatic polling mode to wait for end of program */ - if (QSPI_AutoPollingMemReady() != HAL_OK) { - return HAL_ERROR; + + res = QSPI_Command(PAGE_PROGRAM_CMD, true, current_addr, buffer, NULL, current_size); + if (res != HAL_OK) + { + break; } + /* Update the address and size variables for next page programming */ buffer_size -= current_size; current_addr += current_size; @@ -737,7 +765,7 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b } while (current_size); - return HAL_OK; + return res; } @@ -804,7 +832,7 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, uint8_t command, bool hasAddress, uint32_t address, - uint8_t dataLength, + size_t dataLength, bool write ) { From 9ec7d22712c6543af6b10e4238221887361bb53f Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 14:30:11 +0100 Subject: [PATCH 28/49] intermediate commit --- Demo_Project_H7A3/Core/Src/octospi.c | 293 ++++++++++----------------- 1 file changed, 107 insertions(+), 186 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 5c782c9..8eb5bc9 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -24,30 +24,27 @@ #include #include // for memset -//MT25TL256 commands +//MT25TL256 commands: + #define WRITE_ENABLE_CMD 0x06 // WRITE ENABLE #define READ_STATUS_REG_CMD 0x05 // READ STATUS REGISTER -//#define WRITE_STATUS_REG_CMD 0x01 // WRITE STATUS REGISTER #define SECTOR_ERASE_CMD 0x20 // 4KiB SUBSECTOR ERASE #define PAGE_PROGRAM_CMD 0x02 // PAGE PROGRAM, program 1-256 bytes (cannot cross page boundary) #define CHIP_ERASE_CMD 0xC7 // 128Mib BULK ERASE (for each die, so 256Mib total) -#define QUAD_IN_FAST_PROG_CMD 0x38 // EXTENDED QUAD INPUT FAST PROGRAM - -#define QUAD_OUT_FAST_READ_CMD 0x6B // QUAD OUTPUT FAST READ -#define QPI_ENABLE_CMD 0x35 // ENTER QUAD INPUT/OUTPUT MODE -#define DISABLE_QIP_MODE 0xf5 // RESET QUAD INPUT/OUTPUT MODE +#define FAST_READ_CMD 0x0B // FAST READ #define RESET_ENABLE_CMD 0x66 // RESET ENABLE #define RESET_EXECUTE_CMD 0x99 // RESET MEMORY #define READ_ID_CMD 0xAF // MULTIPLE I/O READ ID (supports 1-1-1,2-2-2, 4-4-4 - //DTR commands (commands with command in STR and with address and data in DTR when device is not in DTR mode) #define DTR_FAST_READ_CMD 0x0D // DTR FAST READ, TODO: use this - +//configuration register commands: #define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 #define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 #define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 #define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 + + //#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // todo: check which one is this? sometimes 0,4,8 or 10 #define FAST_READ_DUMMY_CYCLES 10 @@ -575,7 +572,7 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres // OSPI_RegularCmdTypeDef sCommand = {}; HAL_StatusTypeDef res = HAL_OK; - EraseStartAddress &= ~(MEMORY_DUAL_SECTOR_SIZE - 1); + EraseStartAddress &= ~(MEMORY_DUAL_SECTOR_SIZE - 1); // mask lower bits of address, only an entire sector can be erased /* Erasing Sequence -------------------------------------------------- */ @@ -614,45 +611,18 @@ uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_s OSPI_RegularCmdTypeDef sCommand = {}; HAL_StatusTypeDef res = HAL_OK; - sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? - sCommand.FlashId = 0; //only applies if Dualquad is disabled - #ifdef USE_READ_DTR - sCommand.Instruction = 0x0D; // DTR FAST READ + res = QSPI_InitCommandStruct(&sCommand, DTR_FAST_READ_CMD, true, address, buffer_size, false); #else - sCommand.Instruction = 0x0B; // FAST READ + res = QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, address, buffer_size, false); #endif - sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.Address = address; - sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; -// sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; -#ifdef USE_READ_DTR - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; -#else - sCommand.AddressDtrMode = HAL_OSPI_ADDRESS_DTR_DISABLE; -#endif - sCommand.AlternateBytes = 0; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.AlternateBytesSize = 0; - sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; - sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; - sCommand.NbData = buffer_size; -// sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; -#ifdef USE_READ_DTR - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; -#else - sCommand.DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; -#endif - sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; // Configure the command - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + if (res == HAL_OK) + { + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + } if (res == HAL_OK) { @@ -665,8 +635,6 @@ uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_s uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) { -// OSPI_RegularCmdTypeDef sCommand = {}; -// OSPI_RegularCmdTypeDef sCommand2 = {}; uint32_t current_size; //number of bytes to write in current operation uint32_t current_addr; //start address to write to in current operation uint32_t bytesRemainingInPage; @@ -682,45 +650,8 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b /* Initialize the address variables */ -// sCommand.OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? -// sCommand.FlashId = 0; //only applies if Dualquad is disabled -// sCommand.Instruction = PAGE_PROGRAM_CMD; // page program -// sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; -// sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; -// sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; -// sCommand.Address = address; -// sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; -// sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; -// sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; -// sCommand.AlternateBytes = 0; -// sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; -// sCommand.AlternateBytesSize = 0; -// sCommand.AlternateBytesDtrMode = HAL_OSPI_ALTERNATE_BYTES_DTR_DISABLE; -// sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; -// sCommand.NbData = current_size; -// sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; -// sCommand.DummyCycles = 0; -// sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used -// sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; -// -// sCommand.Address = current_addr; -// sCommand.NbData = current_size; - -// QSPI_InitCommandStruct(&sCommand, PAGE_PROGRAM_CMD, true, current_addr, current_size, true); - -// QSPI_InitCommandStruct(&sCommand2, PAGE_PROGRAM_CMD, true, current_addr, current_size, true); - -// uint8_t command, -// bool hasAddress, -// uint32_t address, -// uint8_t dataLength, -// bool write - /* Perform the write page by page */ do { -// sCommand.Address = current_addr; -// sCommand.NbData = current_size; - /* Enable write operations */ res = QSPI_WriteEnable(); if (res != HAL_OK) @@ -728,26 +659,6 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b break; } - -// /* Configure the command */ -// if (HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) -// != HAL_OK) { -// -// return HAL_ERROR; -// } -// -// /* Transmission of the data */ -// if (HAL_OSPI_Transmit(&hospi1, (uint8_t*)buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK) { -// return HAL_ERROR; -// } -// -// /* Configure automatic polling mode to wait for end of program */ -// if (QSPI_AutoPollingMemReady() != HAL_OK) { -// return HAL_ERROR; -// } - - - res = QSPI_Command(PAGE_PROGRAM_CMD, true, current_addr, buffer, NULL, current_size); if (res != HAL_OK) { @@ -760,8 +671,7 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b current_addr += current_size; buffer += current_size; - bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); - current_size = (buffer_size > bytesRemainingInPage) ? bytesRemainingInPage : buffer_size; + current_size = (buffer_size > MEMORY_DUAL_PAGE_SIZE) ? MEMORY_DUAL_PAGE_SIZE : buffer_size; } while (current_size); @@ -775,28 +685,14 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) HAL_StatusTypeDef res = HAL_OK; OSPI_RegularCmdTypeDef sCommand = {}; - /* Initialize memory-mapped mode for read operations */ - sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; - sCommand.Instruction = 0x0B;//0xEB;// QUAD INPUT/OUTPUT FAST READ; - sCommand.FlashId = 0; - sCommand.InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; - sCommand.InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; - sCommand.Address = 0; - sCommand.AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; - sCommand.AddressSize = HAL_OSPI_ADDRESS_24_BITS; - sCommand.AlternateBytesMode = HAL_OSPI_ALTERNATE_BYTES_NONE; - sCommand.DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; - sCommand.NbData = 1; - sCommand.DummyCycles = FAST_READ_DUMMY_CYCLES; - sCommand.SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; - - sCommand.InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; - sCommand.AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; - sCommand.DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; - - sCommand.DQSMode = HAL_OSPI_DQS_DISABLE; - +#ifdef USE_READ_DTR + QSPI_InitCommandStruct(&sCommand, DTR_FAST_READ_CMD, true, 0, 1, false); +#else + QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, 0, 1, false); +#endif + QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, 0, 1, false); + sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; // memory map instruction, called by peripheral, not with function res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); @@ -809,7 +705,7 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) // /* Initialize memory-mapped mode for write operations */ sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; - sCommand.Instruction = 0;// 0x32; // QUAD INPUT FAST PROGRAM Command ??? + sCommand.Instruction = 0;// todo check if this is correct sCommand.DummyCycles = 0; // ? sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? @@ -828,6 +724,64 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) return res; } + +static uint8_t QSPI_ResetChip() +{ + uint32_t temp = 0; + HAL_StatusTypeDef res = HAL_OK; + /* Erasing Sequence -------------------------------------------------- */ + + res = QSPI_Command(RESET_ENABLE_CMD, false, 0, NULL, NULL, 0); + + if (res == HAL_OK) + { + //delay + //todo remove magic number + for (temp = 0; temp < 47; temp++) + { + __NOP(); + } + + res = QSPI_Command(RESET_EXECUTE_CMD, false, 0, NULL, NULL, 0); + } + + if (res == HAL_OK) + { + DualQuadState.quadProtocolEnabled = false; + DualQuadState.dtrProtocolEnabled = false; + } + + return res; +} + + + +static uint8_t QSPI_ReadChipId(void) +{ + uint8_t test_buffer[3*2] = { 0 }; + HAL_StatusTypeDef res = HAL_OK; + uint8_t i; + + res = QSPI_Command(READ_ID_CMD, false, 0, NULL, test_buffer, sizeof(test_buffer)); + + for(i=0;i<2;++i) + { + //even bytes are first die, odd bytes are second die + if ((test_buffer[0*2+i] != 0x20) || + (test_buffer[1*2+i] != 0xBA) || + (test_buffer[2*2+i] != 0x18)) + { + //incorrect id + res = HAL_ERROR; + break; + } + } + + return res; +} + + + static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, uint8_t command, bool hasAddress, @@ -840,7 +794,7 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, //TODO check params - sCommandPtr->OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; //? + sCommandPtr->OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; // called by a function call sCommandPtr->FlashId = 0; //only applies if Dualquad is disabled sCommandPtr->Instruction = command; @@ -861,7 +815,14 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, { sCommandPtr->AddressSize = HAL_OSPI_ADDRESS_24_BITS; } - sCommandPtr->AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + if (command == DTR_FAST_READ_CMD) + { + sCommandPtr->AddressDtrMode = HAL_OSPI_ADDRESS_DTR_ENABLE; + } + else + { + sCommandPtr->AddressDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_ADDRESS_DTR_ENABLE : HAL_OSPI_ADDRESS_DTR_DISABLE; + } } else { @@ -881,7 +842,15 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, { sCommandPtr->DataMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_DATA_4_LINES : HAL_OSPI_DATA_1_LINE; sCommandPtr->NbData = dataLength; - sCommandPtr->DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + + if (command == DTR_FAST_READ_CMD) + { + sCommandPtr->DataDtrMode = HAL_OSPI_DATA_DTR_ENABLE; + } + else + { + sCommandPtr->DataDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_DATA_DTR_ENABLE : HAL_OSPI_DATA_DTR_DISABLE; + } } else { @@ -893,7 +862,15 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, //TODO set FAST_READ_DUMMY_CYCLES - sCommandPtr->DummyCycles = 0; + if ((sCommandPtr->Instruction == FAST_READ_CMD) || (sCommandPtr->Instruction == DTR_FAST_READ_CMD)) + { + sCommandPtr->DummyCycles = FAST_READ_DUMMY_CYCLES; + } + else + { + sCommandPtr->DummyCycles = 0; + } + sCommandPtr->DQSMode = HAL_OSPI_DQS_DISABLE; // no data strobe used sCommandPtr->SIOOMode = HAL_OSPI_SIOO_INST_EVERY_CMD; @@ -975,60 +952,4 @@ static uint8_t QSPI_Command(uint8_t command, return res; } -static uint8_t QSPI_ResetChip() -{ - uint32_t temp = 0; - HAL_StatusTypeDef res = HAL_OK; - /* Erasing Sequence -------------------------------------------------- */ - - res = QSPI_Command(RESET_ENABLE_CMD, false, 0, NULL, NULL, 0); - - if (res == HAL_OK) - { - //delay - //todo remove magic number - for (temp = 0; temp < 47; temp++) - { - __NOP(); - } - - res = QSPI_Command(RESET_EXECUTE_CMD, false, 0, NULL, NULL, 0); - } - - if (res == HAL_OK) - { - DualQuadState.quadProtocolEnabled = false; - DualQuadState.dtrProtocolEnabled = false; - } - - return res; -} - - - -static uint8_t QSPI_ReadChipId(void) -{ - uint8_t test_buffer[3*2] = { 0 }; - HAL_StatusTypeDef res = HAL_OK; - uint8_t i; - - res = QSPI_Command(READ_ID_CMD, false, 0, NULL, test_buffer, sizeof(test_buffer)); - - for(i=0;i<2;++i) - { - //even bytes are first die, odd bytes are second die - if ((test_buffer[0*2+i] != 0x20) || - (test_buffer[1*2+i] != 0xBA) || - (test_buffer[2*2+i] != 0x18)) - { - //incorrect id - res = HAL_ERROR; - break; - } - } - - return res; -} - - /* USER CODE END 1 */ From 9ebca96c0401fe53bae90667f01071dbe1c27868 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 15:10:21 +0100 Subject: [PATCH 29/49] READ_DTR fails at byte 13 --- Demo_Project_H7A3/Core/Src/main.c | 16 ++++- Demo_Project_H7A3/Core/Src/octospi.c | 76 ++++---------------- Demo_Project_H7A3/Custom_Loader Debug.launch | 2 +- 3 files changed, 28 insertions(+), 66 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index 2256985..e7389b2 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -70,6 +70,10 @@ int main(void) /* USER CODE BEGIN 1 */ HAL_StatusTypeDef res = HAL_OK; volatile bool testFlash = false; // make high with debugger + + uint32_t sectorIndex = 0; + uint32_t address; + uint32_t byteIndex; /* USER CODE END 1 */ /* Enable I-Cache---------------------------------------------------------*/ @@ -96,8 +100,7 @@ int main(void) MX_OCTOSPI1_Init(); /* USER CODE BEGIN 2 */ - uint32_t sectorIndex = 0; - uint32_t address; + res = CSP_QUADSPI_Init(); @@ -117,7 +120,7 @@ int main(void) while (1); //breakpoint - error detected } - HAL_Delay(10); // todo remove magic number + //HAL_Delay(10); // todo remove magic number buffer_test[0] = sectorIndex+1; res = CSP_QSPI_WriteMemory(buffer_test, sectorIndex * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); @@ -146,6 +149,13 @@ int main(void) address = 0x90000000 + sectorIndex * MEMORY_DUAL_SECTOR_SIZE; if (memcmp(buffer_test, (uint8_t*) (address), MEMORY_DUAL_SECTOR_SIZE) != 0) { + for(byteIndex = 0; byteIndex < MEMORY_DUAL_SECTOR_SIZE; ++byteIndex) + { + if ( buffer_test[byteIndex] != ((uint8_t*)(address))[byteIndex]) + { + break; + } + } while (1); //breakpoint - error detected - otherwise QSPI works properly } } diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 8eb5bc9..293cca5 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -56,8 +56,8 @@ #define MT25TL256_MAX_CLK (90*1000*1000) // TODO use this -//#define USE_COMMAND_DTR // if enabled dtr for command phase + address + data will be used -#define USE_READ_DTR // if enabled +//#define USE_COMMAND_DTR // if enabled dtr for command phase + address + data will be used, doesn't work +//#define USE_READ_DTR // if enabled DDR_FAST_READ_CMD will be used static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); @@ -347,10 +347,8 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_ResetChip(); } - HAL_Delay(1); // todo remove magic number - if (res == HAL_OK) { res = QSPI_ReadChipId(); @@ -366,25 +364,12 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_Configuration(); } -// if (res == HAL_OK) -// { -// res = QSPI_ReadChipId(); -// } -// -// if (res != HAL_OK) -// { -// res = QSPI_ReadChipId(); -// } - - if (res != HAL_OK) { errorCode.errorCode = hospi1.ErrorCode; } - - (void)errorCode; return res; @@ -401,6 +386,7 @@ static uint8_t QSPI_AutoPollingSetup(void) OSPI_RegularCmdTypeDef sCommand = {0}; HAL_StatusTypeDef res = HAL_OK; + // 2 bytes so both dies are checked res = QSPI_InitCommandStruct(&sCommand, READ_STATUS_REG_CMD, false, 0, 2, false); if (res == HAL_OK) @@ -453,13 +439,10 @@ static uint8_t QSPI_WriteEnable(void) { /* Configure automatic polling mode to wait for write enabling ---- */ - + //check for both dies so shift mask sConfig.Match = STATUS_REG_WEL_MASK | (STATUS_REG_WEL_MASK<<8); sConfig.Mask = STATUS_REG_WEL_MASK | (STATUS_REG_WEL_MASK<<8); -// sConfig.Match = STATUS_REG_WEL_MASK; -// sConfig.Mask = STATUS_REG_WEL_MASK; - sConfig.MatchMode = HAL_OSPI_MATCH_MODE_AND; sConfig.Interval = AUTO_POLLING_INTERVAL; sConfig.AutomaticStop = HAL_OSPI_AUTOMATIC_STOP_ENABLE; @@ -547,10 +530,8 @@ static uint8_t QSPI_Configuration(void) #endif } - // TODO: find out why this doesn't work if (res == HAL_OK) { - memset(read_buffer, 0, 2); // clear buffer before reading res = QSPI_Command(READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD, false, 0, NULL, read_buffer, 2); @@ -563,13 +544,11 @@ static uint8_t QSPI_Configuration(void) } } - return res; } uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) { -// OSPI_RegularCmdTypeDef sCommand = {}; HAL_StatusTypeDef res = HAL_OK; EraseStartAddress &= ~(MEMORY_DUAL_SECTOR_SIZE - 1); // mask lower bits of address, only an entire sector can be erased @@ -579,7 +558,6 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres while (EraseEndAddress >= EraseStartAddress) { - res = QSPI_WriteEnable(); if (res != HAL_OK) { @@ -587,20 +565,12 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres } res = QSPI_Command(SECTOR_ERASE_CMD, true, EraseStartAddress, NULL, NULL, 0); - if (res != HAL_OK) { break; } EraseStartAddress += MEMORY_DUAL_SECTOR_SIZE; - - res = QSPI_AutoPollingMemReady(); - - if (res != HAL_OK) - { - break; - } } return res; @@ -608,28 +578,14 @@ uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddres uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) { - OSPI_RegularCmdTypeDef sCommand = {}; HAL_StatusTypeDef res = HAL_OK; #ifdef USE_READ_DTR - res = QSPI_InitCommandStruct(&sCommand, DTR_FAST_READ_CMD, true, address, buffer_size, false); + res = QSPI_Command(DTR_FAST_READ_CMD, true, address, NULL, buffer, buffer_size); #else - res = QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, address, buffer_size, false); + res = QSPI_Command(FAST_READ_CMD, true, address, NULL, buffer, buffer_size); #endif - - // Configure the command - if (res == HAL_OK) - { - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - } - - if (res == HAL_OK) - { - // read of the data - res = HAL_OSPI_Receive(&hospi1, buffer, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - } - return res; } @@ -640,8 +596,6 @@ uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t b uint32_t bytesRemainingInPage; HAL_StatusTypeDef res = HAL_OK; - //todo check size in command since half the data goes to one die and half the data goes to the other die - current_addr = address; bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); @@ -690,19 +644,14 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) #else QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, 0, 1, false); #endif - - QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, 0, 1, false); sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; // memory map instruction, called by peripheral, not with function res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - - if (res !=HAL_OK) { Error_Handler(); } - // /* Initialize memory-mapped mode for write operations */ sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; sCommand.Instruction = 0;// todo check if this is correct @@ -754,8 +703,6 @@ static uint8_t QSPI_ResetChip() return res; } - - static uint8_t QSPI_ReadChipId(void) { uint8_t test_buffer[3*2] = { 0 }; @@ -780,8 +727,6 @@ static uint8_t QSPI_ReadChipId(void) return res; } - - static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, uint8_t command, bool hasAddress, @@ -941,12 +886,19 @@ static uint8_t QSPI_Command(uint8_t command, res = QSPI_AutoPollingMemReady(); } } - else + else // writeData!= NULL { //memset(readData, 0, dataLength); // clear buffer before reading res = HAL_OSPI_Receive(&hospi1, readData, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); } } + else + { + if (command == SECTOR_ERASE_CMD) + { + res = QSPI_AutoPollingMemReady(); + } + } } return res; diff --git a/Demo_Project_H7A3/Custom_Loader Debug.launch b/Demo_Project_H7A3/Custom_Loader Debug.launch index d05ef97..b0e5aea 100644 --- a/Demo_Project_H7A3/Custom_Loader Debug.launch +++ b/Demo_Project_H7A3/Custom_Loader Debug.launch @@ -73,6 +73,6 @@ - + From e6d02668ffeb29b5967b70c70d3bfc36f28b259a Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 16:24:37 +0100 Subject: [PATCH 30/49] clocked to 280MHz again, read DTR works --- Demo_Project_H7A3/Core/Src/main.c | 2 +- Demo_Project_H7A3/Core/Src/octospi.c | 298 ++++++++++++++------------- Demo_Project_H7A3/Custom_Loader.ioc | 88 ++++---- 3 files changed, 203 insertions(+), 185 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index e7389b2..c867bc3 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -203,7 +203,7 @@ void SystemClock_Config(void) RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_CSI; RCC_OscInitStruct.PLL.PLLM = 1; - RCC_OscInitStruct.PLL.PLLN = 135; + RCC_OscInitStruct.PLL.PLLN = 140; RCC_OscInitStruct.PLL.PLLP = 2; RCC_OscInitStruct.PLL.PLLQ = 128; RCC_OscInitStruct.PLL.PLLR = 2; diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 293cca5..32b2256 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -53,11 +53,21 @@ #define STATUS_REG_WIP_MASK (1UL<<0) #define STATUS_REG_WEL_MASK (1UL<<1) -#define MT25TL256_MAX_CLK (90*1000*1000) // TODO use this + //#define USE_COMMAND_DTR // if enabled dtr for command phase + address + data will be used, doesn't work -//#define USE_READ_DTR // if enabled DDR_FAST_READ_CMD will be used +#define USE_READ_DTR // if enabled DDR_FAST_READ_CMD will be used + +#define MT25TL256_MAX_CLK_STR (133*1000*1000) +#define MT25TL256_MAX_CLK_DTR (90*1000*1000) + +// TODO use this: +#if defined(USE_COMMAND_DTR) || defined(USE_READ_DTR) +#define MT25TL256_MAX_CLK MT25TL256_MAX_CLK_DTR +#else +#define MT25TL256_MAX_CLK MT25TL256_MAX_CLK_STR +#endif static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); @@ -122,16 +132,28 @@ DualQuadStateType; static DualQuadStateType DualQuadState; -static HAL_StatusTypeDef HAL_OSPI_InitOveruled(OSPI_HandleTypeDef *hospi) +static HAL_StatusTypeDef HAL_OSPI_InitOveruled(OSPI_HandleTypeDef *hospiPtr) { -#ifdef USE_COMMAND_DTR - //hospi->Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_USED; + hospiPtr->Init.ClockPrescaler = (SystemCoreClock+MT25TL256_MAX_CLK-1) / MT25TL256_MAX_CLK; + +#if defined(USE_COMMAND_DTR) || defined(USE_READ_DTR) +// hospiPtr->Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_USED; // doesn't work + hospi1.Init.DelayHoldQuarterCycle = HAL_OSPI_DHQC_ENABLE; #else -// hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE; - hospi->Init.DelayBlockBypass = HAL_OSPI_DELAY_BLOCK_USED; + hospi1.Init.SampleShifting = HAL_OSPI_SAMPLE_SHIFTING_HALFCYCLE; #endif - return HAL_OSPI_Init(hospi); + + if (hospi1.Init.DelayHoldQuarterCycle == HAL_OSPI_DHQC_ENABLE) + { + // delay quarter cycle requires at least 4 cycles + if (hospiPtr->Init.ClockPrescaler < 4) + { + hospiPtr->Init.ClockPrescaler = 4; + } + } + + return HAL_OSPI_Init(hospiPtr); } #define HAL_OSPI_Init HAL_OSPI_InitOveruled @@ -332,7 +354,6 @@ void HAL_OSPI_MspDeInit(OSPI_HandleTypeDef* ospiHandle) /* USER CODE BEGIN 1 */ -/* QUADSPI init function */ uint8_t CSP_QUADSPI_Init(void) { HAL_StatusTypeDef res = HAL_OK; volatile OspiErrorCodeType errorCode = {0}; @@ -375,12 +396,138 @@ uint8_t CSP_QUADSPI_Init(void) { return res; } - uint8_t CSP_QSPI_Erase_Chip(void) { return QSPI_Command(CHIP_ERASE_CMD, false, 0, NULL, NULL, 0); } +uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) +{ + HAL_StatusTypeDef res = HAL_OK; + + EraseStartAddress &= ~(MEMORY_DUAL_SECTOR_SIZE - 1); // mask lower bits of address, only an entire sector can be erased + + /* Erasing Sequence -------------------------------------------------- */ + + + while (EraseEndAddress >= EraseStartAddress) + { + res = QSPI_WriteEnable(); + if (res != HAL_OK) + { + break; + } + + res = QSPI_Command(SECTOR_ERASE_CMD, true, EraseStartAddress, NULL, NULL, 0); + if (res != HAL_OK) + { + break; + } + + EraseStartAddress += MEMORY_DUAL_SECTOR_SIZE; + } + + return res; +} + +uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) +{ + HAL_StatusTypeDef res = HAL_OK; + +#ifdef USE_READ_DTR + res = QSPI_Command(DTR_FAST_READ_CMD, true, address, NULL, buffer, buffer_size); +#else + res = QSPI_Command(FAST_READ_CMD, true, address, NULL, buffer, buffer_size); +#endif + + return res; +} + +uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) +{ + uint32_t current_size; //number of bytes to write in current operation + uint32_t current_addr; //start address to write to in current operation + uint32_t bytesRemainingInPage; + HAL_StatusTypeDef res = HAL_OK; + + current_addr = address; + + bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); + current_size = (buffer_size > bytesRemainingInPage) ? bytesRemainingInPage : buffer_size; + + /* Initialize the address variables */ + + + /* Perform the write page by page */ + do { + /* Enable write operations */ + res = QSPI_WriteEnable(); + if (res != HAL_OK) + { + break; + } + + res = QSPI_Command(PAGE_PROGRAM_CMD, true, current_addr, buffer, NULL, current_size); + if (res != HAL_OK) + { + break; + } + + + /* Update the address and size variables for next page programming */ + buffer_size -= current_size; + current_addr += current_size; + buffer += current_size; + + current_size = (buffer_size > MEMORY_DUAL_PAGE_SIZE) ? MEMORY_DUAL_PAGE_SIZE : buffer_size; + + } while (current_size); + + return res; +} + +uint8_t CSP_QSPI_EnableMemoryMappedMode(void) +{ + OSPI_MemoryMappedTypeDef sMemMappedCfg = {}; + HAL_StatusTypeDef res = HAL_OK; + OSPI_RegularCmdTypeDef sCommand = {}; + +#ifdef USE_READ_DTR + QSPI_InitCommandStruct(&sCommand, DTR_FAST_READ_CMD, true, 0, 1, false); +#else + QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, 0, 1, false); +#endif + sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; // memory map instruction, called by peripheral, not with function + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + if (res !=HAL_OK) + { + Error_Handler(); + } + +// /* Initialize memory-mapped mode for write operations */ + sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; + sCommand.Instruction = 0;// todo check if this is correct + sCommand.DummyCycles = 0; // ? + sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? + + res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); + + if (res !=HAL_OK) + { + Error_Handler(); + } + + sMemMappedCfg.TimeOutActivation = HAL_OSPI_TIMEOUT_COUNTER_DISABLE; + sMemMappedCfg.TimeOutPeriod = 0; + + res = HAL_OSPI_MemoryMapped(&hospi1, &sMemMappedCfg); + + return res; +} + +// static functions: + static uint8_t QSPI_AutoPollingSetup(void) { OSPI_RegularCmdTypeDef sCommand = {0}; @@ -420,7 +567,6 @@ static uint8_t QSPI_AutoPollingMemReady(void) return res; } - static uint8_t QSPI_WriteEnable(void) { HAL_StatusTypeDef res = HAL_OK; @@ -453,7 +599,6 @@ static uint8_t QSPI_WriteEnable(void) return res; } -/*Enable quad mode and set dummy cycles count*/ static uint8_t QSPI_Configuration(void) { HAL_StatusTypeDef res = HAL_OK; @@ -510,7 +655,7 @@ static uint8_t QSPI_Configuration(void) if (res == HAL_OK) { memcpy(write_buffer,read_buffer,2); - + //TODO remove magic numbers write_buffer[0] |= ((1<<2)-1)<<6; write_buffer[0] &= ~(1 << 7); // enable Quad mode write_buffer[1] |= ((1<<2)-1)<<6; @@ -547,133 +692,6 @@ static uint8_t QSPI_Configuration(void) return res; } -uint8_t CSP_QSPI_EraseSector(uint32_t EraseStartAddress, uint32_t EraseEndAddress) -{ - HAL_StatusTypeDef res = HAL_OK; - - EraseStartAddress &= ~(MEMORY_DUAL_SECTOR_SIZE - 1); // mask lower bits of address, only an entire sector can be erased - - /* Erasing Sequence -------------------------------------------------- */ - - - while (EraseEndAddress >= EraseStartAddress) - { - res = QSPI_WriteEnable(); - if (res != HAL_OK) - { - break; - } - - res = QSPI_Command(SECTOR_ERASE_CMD, true, EraseStartAddress, NULL, NULL, 0); - if (res != HAL_OK) - { - break; - } - - EraseStartAddress += MEMORY_DUAL_SECTOR_SIZE; - } - - return res; -} - -uint8_t CSP_QSPI_ReadMemory(uint8_t* buffer, uint32_t address, uint32_t buffer_size) -{ - HAL_StatusTypeDef res = HAL_OK; - -#ifdef USE_READ_DTR - res = QSPI_Command(DTR_FAST_READ_CMD, true, address, NULL, buffer, buffer_size); -#else - res = QSPI_Command(FAST_READ_CMD, true, address, NULL, buffer, buffer_size); -#endif - - return res; -} - -uint8_t CSP_QSPI_WriteMemory(const uint8_t* buffer, uint32_t address, uint32_t buffer_size) -{ - uint32_t current_size; //number of bytes to write in current operation - uint32_t current_addr; //start address to write to in current operation - uint32_t bytesRemainingInPage; - HAL_StatusTypeDef res = HAL_OK; - - current_addr = address; - - bytesRemainingInPage = MEMORY_DUAL_PAGE_SIZE - (current_addr % MEMORY_DUAL_PAGE_SIZE); - current_size = (buffer_size > bytesRemainingInPage) ? bytesRemainingInPage : buffer_size; - - /* Initialize the address variables */ - - - /* Perform the write page by page */ - do { - /* Enable write operations */ - res = QSPI_WriteEnable(); - if (res != HAL_OK) - { - break; - } - - res = QSPI_Command(PAGE_PROGRAM_CMD, true, current_addr, buffer, NULL, current_size); - if (res != HAL_OK) - { - break; - } - - - /* Update the address and size variables for next page programming */ - buffer_size -= current_size; - current_addr += current_size; - buffer += current_size; - - current_size = (buffer_size > MEMORY_DUAL_PAGE_SIZE) ? MEMORY_DUAL_PAGE_SIZE : buffer_size; - - } while (current_size); - - return res; -} - - -uint8_t CSP_QSPI_EnableMemoryMappedMode(void) -{ - OSPI_MemoryMappedTypeDef sMemMappedCfg = {}; - HAL_StatusTypeDef res = HAL_OK; - OSPI_RegularCmdTypeDef sCommand = {}; - -#ifdef USE_READ_DTR - QSPI_InitCommandStruct(&sCommand, DTR_FAST_READ_CMD, true, 0, 1, false); -#else - QSPI_InitCommandStruct(&sCommand, FAST_READ_CMD, true, 0, 1, false); -#endif - sCommand.OperationType = HAL_OSPI_OPTYPE_READ_CFG; // memory map instruction, called by peripheral, not with function - - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - if (res !=HAL_OK) - { - Error_Handler(); - } - -// /* Initialize memory-mapped mode for write operations */ - sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; - sCommand.Instruction = 0;// todo check if this is correct - sCommand.DummyCycles = 0; // ? - sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? - - res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); - - if (res !=HAL_OK) - { - Error_Handler(); - } - - sMemMappedCfg.TimeOutActivation = HAL_OSPI_TIMEOUT_COUNTER_DISABLE; - sMemMappedCfg.TimeOutPeriod = 0; - - res = HAL_OSPI_MemoryMapped(&hospi1, &sMemMappedCfg); - - return res; -} - - static uint8_t QSPI_ResetChip() { uint32_t temp = 0; diff --git a/Demo_Project_H7A3/Custom_Loader.ioc b/Demo_Project_H7A3/Custom_Loader.ioc index 0779e8d..5c52222 100644 --- a/Demo_Project_H7A3/Custom_Loader.ioc +++ b/Demo_Project_H7A3/Custom_Loader.ioc @@ -107,97 +107,97 @@ ProjectManager.ToolChainLocation= ProjectManager.UnderRoot=true ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_OCTOSPI1_Init-OCTOSPI1-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true RCC.ADCFreq_Value=2844444.4444444445 -RCC.AHB12Freq_Value=270000000 -RCC.AHB4Freq_Value=270000000 -RCC.APB1Freq_Value=135000000 -RCC.APB2Freq_Value=135000000 -RCC.APB3Freq_Value=135000000 -RCC.APB4Freq_Value=135000000 -RCC.AXIClockFreq_Value=270000000 -RCC.CDCPREFreq_Value=270000000 +RCC.AHB12Freq_Value=280000000 +RCC.AHB4Freq_Value=280000000 +RCC.APB1Freq_Value=140000000 +RCC.APB2Freq_Value=140000000 +RCC.APB3Freq_Value=140000000 +RCC.APB4Freq_Value=140000000 +RCC.AXIClockFreq_Value=280000000 +RCC.CDCPREFreq_Value=280000000 RCC.CDPPRE=RCC_APB3_DIV2 RCC.CDPPRE1=RCC_APB1_DIV2 RCC.CDPPRE2=RCC_APB2_DIV2 RCC.CECFreq_Value=32000 RCC.CKPERFreq_Value=64000000 -RCC.CortexFreq_Value=270000000 -RCC.CpuClockFreq_Value=270000000 +RCC.CortexFreq_Value=280000000 +RCC.CpuClockFreq_Value=280000000 RCC.DAC1Freq_Value=32000 RCC.DAC2Freq_Value=32000 -RCC.DFSDM2ACLkFreq_Value=135000000 -RCC.DFSDM2Freq_Value=135000000 -RCC.DFSDMACLkFreq_Value=4218750 -RCC.DFSDMFreq_Value=135000000 +RCC.DFSDM2ACLkFreq_Value=140000000 +RCC.DFSDM2Freq_Value=140000000 +RCC.DFSDMACLkFreq_Value=4375000 +RCC.DFSDMFreq_Value=140000000 RCC.DIVM1=1 RCC.DIVM2=1 RCC.DIVM3=2 -RCC.DIVN1=135 +RCC.DIVN1=140 RCC.DIVN2=32 RCC.DIVN3=64 -RCC.DIVP1Freq_Value=270000000 +RCC.DIVP1Freq_Value=280000000 RCC.DIVP2=45 RCC.DIVP2Freq_Value=2844444.4444444445 RCC.DIVP3=1 RCC.DIVP3Freq_Value=128000000 RCC.DIVQ1=128 -RCC.DIVQ1Freq_Value=4218750 +RCC.DIVQ1Freq_Value=4375000 RCC.DIVQ2=125 RCC.DIVQ2Freq_Value=1024000 RCC.DIVQ3=8 RCC.DIVQ3Freq_Value=16000000 -RCC.DIVR1Freq_Value=270000000 +RCC.DIVR1Freq_Value=280000000 RCC.DIVR2=128 RCC.DIVR2Freq_Value=1000000 RCC.DIVR3=16 RCC.DIVR3Freq_Value=8000000 -RCC.FDCANFreq_Value=4218750 -RCC.FMCFreq_Value=270000000 +RCC.FDCANFreq_Value=4375000 +RCC.FMCFreq_Value=280000000 RCC.FamilyName=M -RCC.HCLK3ClockFreq_Value=270000000 -RCC.HCLKFreq_Value=270000000 +RCC.HCLK3ClockFreq_Value=280000000 +RCC.HCLKFreq_Value=280000000 RCC.HSE_VALUE=12000000 -RCC.I2C123Freq_Value=135000000 -RCC.I2C4Freq_Value=135000000 +RCC.I2C123Freq_Value=140000000 +RCC.I2C4Freq_Value=140000000 RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CDCPREFreq_Value,CDPPRE,CDPPRE1,CDPPRE2,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,DAC1Freq_Value,DAC2Freq_Value,DFSDM2ACLkFreq_Value,DFSDM2Freq_Value,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVM3,DIVN1,DIVN2,DIVN3,DIVP1Freq_Value,DIVP2,DIVP2Freq_Value,DIVP3,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2,DIVR2Freq_Value,DIVR3,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HSE_VALUE,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL2_VCI_Range-AdvancedSettings,PLL2_VCO_SEL-AdvancedSettings,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2AFreq_Value,SAI2BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SRDPPRE,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SupplySource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16CLockSelection,USART16Freq_Value,USART234578CLockSelection,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value -RCC.LPTIM1Freq_Value=135000000 -RCC.LPTIM2Freq_Value=135000000 -RCC.LPTIM345Freq_Value=135000000 -RCC.LPUART1Freq_Value=135000000 +RCC.LPTIM1Freq_Value=140000000 +RCC.LPTIM2Freq_Value=140000000 +RCC.LPTIM345Freq_Value=140000000 +RCC.LPUART1Freq_Value=140000000 RCC.LTDCFreq_Value=8000000 RCC.MCO1PinFreq_Value=64000000 -RCC.MCO2PinFreq_Value=270000000 +RCC.MCO2PinFreq_Value=280000000 RCC.PLL2FRACN=0 RCC.PLL2_VCI_Range-AdvancedSettings=RCC_PLL2VCIRANGE_0 RCC.PLL2_VCO_SEL-AdvancedSettings=RCC_PLL2VCOMEDIUM RCC.PLLFRACN=0 RCC.PLLSourceVirtual=RCC_PLLSOURCE_CSI -RCC.QSPIFreq_Value=270000000 +RCC.QSPIFreq_Value=280000000 RCC.RNGFreq_Value=48000000 RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE RCC.RTCFreq_Value=32768 -RCC.SAI1Freq_Value=4218750 -RCC.SAI2AFreq_Value=4218750 -RCC.SAI2BFreq_Value=4218750 -RCC.SDMMCFreq_Value=4218750 -RCC.SPDIFRXFreq_Value=4218750 -RCC.SPI123Freq_Value=4218750 -RCC.SPI45Freq_Value=135000000 -RCC.SPI6Freq_Value=135000000 +RCC.SAI1Freq_Value=4375000 +RCC.SAI2AFreq_Value=4375000 +RCC.SAI2BFreq_Value=4375000 +RCC.SDMMCFreq_Value=4375000 +RCC.SPDIFRXFreq_Value=4375000 +RCC.SPI123Freq_Value=4375000 +RCC.SPI45Freq_Value=140000000 +RCC.SPI6Freq_Value=140000000 RCC.SRDPPRE=RCC_APB4_DIV2 -RCC.SWPMI1Freq_Value=135000000 -RCC.SYSCLKFreq_VALUE=270000000 +RCC.SWPMI1Freq_Value=140000000 +RCC.SYSCLKFreq_VALUE=280000000 RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK RCC.SupplySource=PWR_LDO_SUPPLY -RCC.Tim1OutputFreq_Value=270000000 -RCC.Tim2OutputFreq_Value=270000000 -RCC.TraceFreq_Value=270000000 +RCC.Tim1OutputFreq_Value=280000000 +RCC.Tim2OutputFreq_Value=280000000 +RCC.TraceFreq_Value=280000000 RCC.USART16CLockSelection=RCC_USART16910CLKSOURCE_PLL2 RCC.USART16Freq_Value=1024000 RCC.USART234578CLockSelection=RCC_USART234578CLKSOURCE_PLL2 RCC.USART234578Freq_Value=1024000 RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3 RCC.USBFreq_Value=16000000 -RCC.VCO1OutputFreq_Value=540000000 +RCC.VCO1OutputFreq_Value=560000000 RCC.VCO2OutputFreq_Value=128000000 RCC.VCO3OutputFreq_Value=128000000 RCC.VCOInput1Freq_Value=4000000 From 90b5513ab17b5f2ad2010afe310f4ebc459ffbbe Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 16:43:56 +0100 Subject: [PATCH 31/49] updated dummy cycles --- Demo_Project_H7A3/Core/Src/octospi.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 32b2256..3fc0d94 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -44,23 +44,16 @@ #define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 - -//#define DUMMY_CLOCK_CYCLES_READ_QUAD 10 // todo: check which one is this? sometimes 0,4,8 or 10 -#define FAST_READ_DUMMY_CYCLES 10 - -#define AUTO_POLLING_INTERVAL 16 // todo check - #define STATUS_REG_WIP_MASK (1UL<<0) #define STATUS_REG_WEL_MASK (1UL<<1) - +#define MT25TL256_MAX_CLK_STR (133*1000*1000) +#define MT25TL256_MAX_CLK_DTR (90*1000*1000) //#define USE_COMMAND_DTR // if enabled dtr for command phase + address + data will be used, doesn't work -#define USE_READ_DTR // if enabled DDR_FAST_READ_CMD will be used +#define USE_READ_DTR // if enabled DTR_FAST_READ_CMD will be used -#define MT25TL256_MAX_CLK_STR (133*1000*1000) -#define MT25TL256_MAX_CLK_DTR (90*1000*1000) // TODO use this: #if defined(USE_COMMAND_DTR) || defined(USE_READ_DTR) @@ -69,6 +62,10 @@ #define MT25TL256_MAX_CLK MT25TL256_MAX_CLK_STR #endif +#define FAST_READ_DUMMY_CYCLES 11 // (11 is needed in STR and 9 in DTR, less needed in case of lower clocks) + +#define AUTO_POLLING_INTERVAL 16 // todo check + static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); static uint8_t QSPI_Configuration(void); From cae82895091c9470797bd410d93bca24f8a564c2 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 17:31:56 +0100 Subject: [PATCH 32/49] updated todos --- Demo_Project_H7A3/Core/Src/main.c | 7 ++-- Demo_Project_H7A3/Core/Src/octospi.c | 53 ++++++++++++---------------- 2 files changed, 27 insertions(+), 33 deletions(-) diff --git a/Demo_Project_H7A3/Core/Src/main.c b/Demo_Project_H7A3/Core/Src/main.c index c867bc3..5063ac9 100644 --- a/Demo_Project_H7A3/Core/Src/main.c +++ b/Demo_Project_H7A3/Core/Src/main.c @@ -104,6 +104,11 @@ int main(void) res = CSP_QUADSPI_Init(); + if (res != HAL_OK) + { + while (1); //breakpoint - error detected + } + while(!testFlash); // set to true with debugger to proceed to test for (sectorIndex = 0; sectorIndex < MEMORY_DUAL_SECTOR_SIZE; sectorIndex++) @@ -120,8 +125,6 @@ int main(void) while (1); //breakpoint - error detected } - //HAL_Delay(10); // todo remove magic number - buffer_test[0] = sectorIndex+1; res = CSP_QSPI_WriteMemory(buffer_test, sectorIndex * MEMORY_DUAL_SECTOR_SIZE, sizeof(buffer_test)); if (res != HAL_OK) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 3fc0d94..13b4282 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -36,13 +36,16 @@ #define RESET_EXECUTE_CMD 0x99 // RESET MEMORY #define READ_ID_CMD 0xAF // MULTIPLE I/O READ ID (supports 1-1-1,2-2-2, 4-4-4 //DTR commands (commands with command in STR and with address and data in DTR when device is not in DTR mode) -#define DTR_FAST_READ_CMD 0x0D // DTR FAST READ, TODO: use this +#define DTR_FAST_READ_CMD 0x0D // DTR FAST READ //configuration register commands: #define READ_VOLATILE_CONFIGURATION_REGISTER_CMD 0x85 #define WRITE_VOLATILE_CONFIGURATION_REGISTER_CMD 0x81 #define READ_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x65 #define WRITE_ENHANCED_VOLATILE_CONFIGURATION_REGISTER_CMD 0x61 +#define ENHANCED_VOLATILE_CONFIGURATION_REGISTER_QUAD_DISABLE (1<<7) +#define ENHANCED_VOLATILE_CONFIGURATION_REGISTER_DTR_DISABLE (1<<5) + #define STATUS_REG_WIP_MASK (1UL<<0) #define STATUS_REG_WEL_MASK (1UL<<1) @@ -54,8 +57,6 @@ //#define USE_COMMAND_DTR // if enabled dtr for command phase + address + data will be used, doesn't work #define USE_READ_DTR // if enabled DTR_FAST_READ_CMD will be used - -// TODO use this: #if defined(USE_COMMAND_DTR) || defined(USE_READ_DTR) #define MT25TL256_MAX_CLK MT25TL256_MAX_CLK_DTR #else @@ -64,14 +65,14 @@ #define FAST_READ_DUMMY_CYCLES 11 // (11 is needed in STR and 9 in DTR, less needed in case of lower clocks) -#define AUTO_POLLING_INTERVAL 16 // todo check +#define AUTO_POLLING_INTERVAL 16 // TODO: find out optimal polling interval static uint8_t QSPI_WriteEnable(void); static uint8_t QSPI_AutoPollingMemReady(void); static uint8_t QSPI_Configuration(void); static uint8_t QSPI_ResetChip(void); - static uint8_t QSPI_ReadChipId(void); +static uint8_t QSPI_AutoPollingSetup(void); static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, uint8_t command, @@ -88,8 +89,6 @@ static uint8_t QSPI_Command(uint8_t command, uint8_t* readData, size_t dataLength); -static uint8_t QSPI_AutoPollingSetup(void); - typedef union { @@ -365,7 +364,7 @@ uint8_t CSP_QUADSPI_Init(void) { res = QSPI_ResetChip(); } - HAL_Delay(1); // todo remove magic number + HAL_Delay(1); // TODO: use correct delay value from datasheet if (res == HAL_OK) { @@ -504,7 +503,7 @@ uint8_t CSP_QSPI_EnableMemoryMappedMode(void) // /* Initialize memory-mapped mode for write operations */ sCommand.OperationType = HAL_OSPI_OPTYPE_WRITE_CFG; - sCommand.Instruction = 0;// todo check if this is correct + sCommand.Instruction = 0;// TODO: check if this is the correct way to disable memory-mapped write sCommand.DummyCycles = 0; // ? sCommand.DQSMode = HAL_OSPI_DQS_ENABLE; // why strobing enabled? @@ -652,15 +651,13 @@ static uint8_t QSPI_Configuration(void) if (res == HAL_OK) { memcpy(write_buffer,read_buffer,2); - //TODO remove magic numbers - write_buffer[0] |= ((1<<2)-1)<<6; - write_buffer[0] &= ~(1 << 7); // enable Quad mode - write_buffer[1] |= ((1<<2)-1)<<6; - write_buffer[1] &= ~(1 << 7); // enable Quad mode + + write_buffer[0] &= ~ENHANCED_VOLATILE_CONFIGURATION_REGISTER_QUAD_DISABLE; // enable Quad mode + write_buffer[1] &= ~ENHANCED_VOLATILE_CONFIGURATION_REGISTER_QUAD_DISABLE; // enable Quad mode #ifdef USE_COMMAND_DTR - write_buffer[0] &= ~(1 << 5); // enable DTR mode - write_buffer[1] &= ~(1 << 5); // enable DTR mode + write_buffer[0] &= ~ENHANCED_VOLATILE_CONFIGURATION_REGISTER_DTR_DISABLE; // enable DTR mode + write_buffer[1] &= ~ENHANCED_VOLATILE_CONFIGURATION_REGISTER_DTR_DISABLE; // enable DTR mode DualQuadState.switchingToDtr = true; #endif @@ -699,12 +696,7 @@ static uint8_t QSPI_ResetChip() if (res == HAL_OK) { - //delay - //todo remove magic number - for (temp = 0; temp < 47; temp++) - { - __NOP(); - } + HAL_Delay(1); // TODO: use correct delay value from datasheet res = QSPI_Command(RESET_EXECUTE_CMD, false, 0, NULL, NULL, 0); } @@ -752,7 +744,12 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, { HAL_StatusTypeDef res = HAL_OK; - //TODO check params + if (sCommandPtr == NULL) + { + res = HAL_ERROR; + return res; + } + sCommandPtr->OperationType = HAL_OSPI_OPTYPE_COMMON_CFG; // called by a function call sCommandPtr->FlashId = 0; //only applies if Dualquad is disabled @@ -761,11 +758,12 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, sCommandPtr->InstructionMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_INSTRUCTION_4_LINES : HAL_OSPI_INSTRUCTION_1_LINE; sCommandPtr->InstructionSize = HAL_OSPI_INSTRUCTION_8_BITS; sCommandPtr->InstructionDtrMode = DualQuadState.dtrProtocolEnabled ? HAL_OSPI_INSTRUCTION_DTR_ENABLE : HAL_OSPI_INSTRUCTION_DTR_DISABLE; +// sCommandPtr->InstructionDtrMode = HAL_OSPI_INSTRUCTION_DTR_DISABLE; if (hasAddress) { sCommandPtr->AddressMode = DualQuadState.quadProtocolEnabled ? HAL_OSPI_ADDRESS_4_LINES : HAL_OSPI_ADDRESS_1_LINE; - sCommandPtr->Address = address; // todo check if this is correct + sCommandPtr->Address = address; // peripheral will automatically convert this to correct address for each die if ((command == 0xE2) || (command == 0xE3)) // these commands are the only ones with 4 byte address { @@ -819,9 +817,6 @@ static uint8_t QSPI_InitCommandStruct( OSPI_RegularCmdTypeDef* sCommandPtr, sCommandPtr->DataDtrMode = HAL_OSPI_DATA_DTR_DISABLE; } - //TODO set FAST_READ_DUMMY_CYCLES - - if ((sCommandPtr->Instruction == FAST_READ_CMD) || (sCommandPtr->Instruction == DTR_FAST_READ_CMD)) { sCommandPtr->DummyCycles = FAST_READ_DUMMY_CYCLES; @@ -844,8 +839,6 @@ static uint8_t QSPI_Command(uint8_t command, uint8_t* readData, size_t dataLength) { - // todo add line width option and dtr option - OSPI_RegularCmdTypeDef sCommand = {0}; HAL_StatusTypeDef res = HAL_OK; @@ -867,7 +860,6 @@ static uint8_t QSPI_Command(uint8_t command, } - if (res == HAL_OK) { res = HAL_OSPI_Command(&hospi1, &sCommand, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); @@ -903,7 +895,6 @@ static uint8_t QSPI_Command(uint8_t command, } else // writeData!= NULL { - //memset(readData, 0, dataLength); // clear buffer before reading res = HAL_OSPI_Receive(&hospi1, readData, HAL_OSPI_TIMEOUT_DEFAULT_VALUE); } } From b214a43ed14577b7b6a71730b08ff3de25b8670e Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 17:52:27 +0100 Subject: [PATCH 33/49] removed unused variable --- Demo_Project_H7A3/Core/Src/octospi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/Demo_Project_H7A3/Core/Src/octospi.c b/Demo_Project_H7A3/Core/Src/octospi.c index 13b4282..e815056 100644 --- a/Demo_Project_H7A3/Core/Src/octospi.c +++ b/Demo_Project_H7A3/Core/Src/octospi.c @@ -688,7 +688,6 @@ static uint8_t QSPI_Configuration(void) static uint8_t QSPI_ResetChip() { - uint32_t temp = 0; HAL_StatusTypeDef res = HAL_OK; /* Erasing Sequence -------------------------------------------------- */ From fca9fe3e1090a6bcb2475466e55ce9722aa0a1d2 Mon Sep 17 00:00:00 2001 From: Chris Idema <48433711+ChrisIdema@users.noreply.github.com> Date: Mon, 16 Jan 2023 18:21:08 +0100 Subject: [PATCH 34/49] flashing with stm32cube programmer fails --- Demo_Project_H7A3/.cproject | 10 ++++++---- Demo_Project_H7A3/Core/Inc/octospi.h | 15 +++++++++------ Demo_Project_H7A3/Core/Src/Dev_Inf.c | 4 ++-- Demo_Project_H7A3/Core/Src/main.c | 9 +++++++-- .../STM32H7A3ZIT6Q_MT25TL256.stldr | Bin 0 -> 1990888 bytes 5 files changed, 24 insertions(+), 14 deletions(-) create mode 100644 Demo_Project_H7A3/STM32H7A3ZIT6Q_MT25TL256.stldr diff --git a/Demo_Project_H7A3/.cproject b/Demo_Project_H7A3/.cproject index fd18b69..22fc809 100644 --- a/Demo_Project_H7A3/.cproject +++ b/Demo_Project_H7A3/.cproject @@ -14,7 +14,7 @@ - + - +