Merge tag 'asoc-fix-v6.8-rc2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.8

This pull request adds Richard Fitzgerald's series with extensive fixes
for the CS35L56, he said:

    These patches fix various things that were undocumented, unknown or
    uncertain when the original driver code was written. And also a few
    things that were just bugs.

Author: tiwai

Documentation/ABI/testing/sysfs-platform-silicom

@@ -10,6 +10,7 @@ What:		/sys/devices/platform/silicom-platform/power_cycle
 Date:		November 2023
 KernelVersion:	6.7
 Contact:	Henry Shi <henrys@silicom-usa.com>
+Description:
 		This file allow user to power cycle the platform.
 		Default value is 0; when set to 1, it powers down
 		the platform, waits 5 seconds, then powers on the

Documentation/accel/introduction.rst

@@ -101,8 +101,8 @@ External References
 email threads
 -------------
 
-* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
-* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
+* `Initial discussion on the New subsystem for acceleration devices <https://lore.kernel.org/lkml/CAFCwf11=9qpNAepL7NL+YAV_QO=Wv6pnWPhKHKAepK3fNn+2Dg@mail.gmail.com/>`_ - Oded Gabbay (2022)
+* `patch-set to add the new subsystem <https://lore.kernel.org/lkml/20221022214622.18042-1-ogabbay@kernel.org/>`_ - Oded Gabbay (2022)
 
 Conference talks
 ----------------

Documentation/admin-guide/kernel-parameters.rst

@@ -218,8 +218,3 @@ bytes respectively. Such letter suffixes can also be entirely omitted:
 
 .. include:: kernel-parameters.txt
    :literal:
-
-Todo
-----
-
-	Add more DRM drivers.

Documentation/admin-guide/kernel-per-CPU-kthreads.rst

@@ -243,13 +243,9 @@ To reduce its OS jitter, do any of the following:
 3.	Do any of the following needed to avoid jitter that your
 	application cannot tolerate:
 
-	a.	Build your kernel with CONFIG_SLUB=y rather than
-		CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
-		use of each CPU's workqueues to run its cache_reap()
-		function.
-	b.	Avoid using oprofile, thus avoiding OS jitter from
+	a.	Avoid using oprofile, thus avoiding OS jitter from
 		wq_sync_buffer().
-	c.	Limit your CPU frequency so that a CPU-frequency
+	b.	Limit your CPU frequency so that a CPU-frequency
 		governor is not required, possibly enlisting the aid of
 		special heatsinks or other cooling technologies.  If done
 		correctly, and if you CPU architecture permits, you should
@@ -259,7 +255,7 @@ To reduce its OS jitter, do any of the following:
 
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	d.	As of v3.18, Christoph Lameter's on-demand vmstat workers
+	c.	As of v3.18, Christoph Lameter's on-demand vmstat workers
 		commit prevents OS jitter due to vmstat_update() on
 		CONFIG_SMP=y systems.  Before v3.18, is not possible
 		to entirely get rid of the OS jitter, but you can
@@ -274,20 +270,20 @@ To reduce its OS jitter, do any of the following:
 		(based on an earlier one from Gilad Ben-Yossef) that
 		reduces or even eliminates vmstat overhead for some
 		workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
-	e.	If running on high-end powerpc servers, build with
+	d.	If running on high-end powerpc servers, build with
 		CONFIG_PPC_RTAS_DAEMON=n.  This prevents the RTAS
 		daemon from running on each CPU every second or so.
 		(This will require editing Kconfig files and will defeat
 		this platform's RAS functionality.)  This avoids jitter
 		due to the rtas_event_scan() function.
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	f.	If running on Cell Processor, build your kernel with
+	e.	If running on Cell Processor, build your kernel with
 		CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
 		spu_gov_work().
 		WARNING:  Please check your CPU specifications to
 		make sure that this is safe on your particular system.
-	g.	If running on PowerMAC, build your kernel with
+	f.	If running on PowerMAC, build your kernel with
 		CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
 		avoiding OS jitter from rackmeter_do_timer().
 

Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml

@@ -85,7 +85,7 @@ allOf:
         clocks:
           minItems: 6
           maxItems: 6
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -99,7 +99,7 @@ allOf:
         clocks:
           minItems: 4
           maxItems: 4
-        regs:
+        reg:
           minItems: 2
           maxItems: 2
 
@@ -116,7 +116,7 @@ allOf:
         clocks:
           minItems: 3
           maxItems: 3
-        regs:
+        reg:
           minItems: 1
           maxItems: 1
 

Documentation/devicetree/bindings/media/cnm,wave521c.yaml

@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - ti,k3-j721s2-wave521c
+          - ti,j721s2-wave521c
       - const: cnm,wave521c
 
   reg:
@@ -53,7 +53,7 @@ additionalProperties: false
 examples:
   - |
     vpu: video-codec@12345678 {
-        compatible = "ti,k3-j721s2-wave521c", "cnm,wave521c";
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
         reg = <0x12345678 0x1000>;
         clocks = <&clks 42>;
         interrupts = <42>;

Documentation/filesystems/overlayfs.rst

@@ -145,7 +145,9 @@ filesystem, an overlay filesystem needs to record in the upper filesystem
 that files have been removed.  This is done using whiteouts and opaque
 directories (non-directories are always opaque).
 
-A whiteout is created as a character device with 0/0 device number.
+A whiteout is created as a character device with 0/0 device number or
+as a zero-size regular file with the xattr "trusted.overlay.whiteout".
+
 When a whiteout is found in the upper level of a merged directory, any
 matching name in the lower level is ignored, and the whiteout itself
 is also hidden.
@@ -154,6 +156,13 @@ A directory is made opaque by setting the xattr "trusted.overlay.opaque"
 to "y".  Where the upper filesystem contains an opaque directory, any
 directory in the lower filesystem with the same name is ignored.
 
+An opaque directory should not conntain any whiteouts, because they do not
+serve any purpose.  A merge directory containing regular files with the xattr
+"trusted.overlay.whiteout", should be additionally marked by setting the xattr
+"trusted.overlay.opaque" to "x" on the merge directory itself.
+This is needed to avoid the overhead of checking the "trusted.overlay.whiteout"
+on all entries during readdir in the common case.
+
 readdir
 -------
 
@@ -534,8 +543,9 @@ A lower dir with a regular whiteout will always be handled by the overlayfs
 mount, so to support storing an effective whiteout file in an overlayfs mount an
 alternative form of whiteout is supported. This form is a regular, zero-size
 file with the "overlay.whiteout" xattr set, inside a directory with the
-"overlay.whiteouts" xattr set. Such whiteouts are never created by overlayfs,
-but can be used by userspace tools (like containers) that generate lower layers.
+"overlay.opaque" xattr set to "x" (see `whiteouts and opaque directories`_).
+These alternative whiteouts are never created by overlayfs, but can be used by
+userspace tools (like containers) that generate lower layers.
 These alternative whiteouts can be escaped using the standard xattr escape
 mechanism in order to properly nest to any depth.
 

Documentation/sphinx/templates/kernel-toc.html

@@ -12,5 +12,7 @@ <h3 class="kernel-toc-contents">Contents</h3>
 <script type="text/javascript"> <!--
   var sbar = document.getElementsByClassName("sphinxsidebar")[0];
   let currents = document.getElementsByClassName("current")
-  sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  if (currents.length) {
+    sbar.scrollTop = currents[currents.length - 1].offsetTop;
+  }
   --> </script>

MAINTAINERS

@@ -3168,10 +3168,10 @@ F:	drivers/hwmon/asus-ec-sensors.c
 
 ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
 M:	Corentin Chary <corentin.chary@gmail.com>
-L:	acpi4asus-user@lists.sourceforge.net
+M:	Luke D. Jones <luke@ljones.dev>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-W:	http://acpi4asus.sf.net
+W:	https://asus-linux.org/
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
@@ -4547,7 +4547,7 @@ F:	drivers/net/ieee802154/ca8210.c
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
-L:	linux-cachefs@redhat.com (moderated for non-subscribers)
+L:	netfs@lists.linux.dev
 S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.rst
 F:	fs/cachefiles/
@@ -5958,7 +5958,6 @@ S:	Maintained
 F:	drivers/platform/x86/dell/dell-wmi-descriptor.c
 
 DELL WMI HARDWARE PRIVACY SUPPORT
-M:	Perry Yuan <Perry.Yuan@dell.com>
 L:	Dell.Client.Kernel@dell.com
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -7955,12 +7954,13 @@ L:	rust-for-linux@vger.kernel.org
 S:	Maintained
 F:	rust/kernel/net/phy.rs
 
-EXEC & BINFMT API
+EXEC & BINFMT API, ELF
 R:	Eric Biederman <ebiederm@xmission.com>
 R:	Kees Cook <keescook@chromium.org>
 L:	linux-mm@kvack.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/execve
+F:	Documentation/userspace-api/ELF.rst
 F:	fs/*binfmt_*.c
 F:	fs/exec.c
 F:	include/linux/binfmts.h
@@ -8223,7 +8223,8 @@ F:	include/linux/iomap.h
 
 FILESYSTEMS [NETFS LIBRARY]
 M:	David Howells <dhowells@redhat.com>
-L:	linux-cachefs@redhat.com (moderated for non-subscribers)
+R:	Jeff Layton <jlayton@kernel.org>
+L:	netfs@lists.linux.dev
 L:	linux-fsdevel@vger.kernel.org
 S:	Supported
 F:	Documentation/filesystems/caching/
@@ -20549,6 +20550,7 @@ F:	Documentation/translations/sp_SP/
 
 SPARC + UltraSPARC (sparc/sparc64)
 M:	"David S. Miller" <davem@davemloft.net>
+M:	Andreas Larsson <andreas@gaisler.com>
 L:	sparclinux@vger.kernel.org
 S:	Maintained
 Q:	http://patchwork.ozlabs.org/project/sparclinux/list/

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*
@@ -986,6 +986,10 @@ NOSTDINC_FLAGS += -nostdinc
 # perform bounds checking.
 KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
 
+#Currently, disable -Wstringop-overflow for GCC 11, globally.
+KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
+KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
+
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow