Merge tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework cpuidle governors to call tick_nohz_get_sleep_length()
  less often and fix one of them, rework hibernation to avoid storing
  pages filled with zeros in hibernation images, switch over some
  cpufreq drivers to use void remove callbacks, fix and clean up
  multiple cpufreq drivers, fix the devfreq core, update the cpupower
  utility and make other assorted improvements.

  Specifics:

   - Rework the menu and teo cpuidle governors to avoid calling
     tick_nohz_get_sleep_length(), which is likely to become quite
     expensive going forward, too often and improve making decisions
     regarding whether or not to stop the scheduler tick in the teo
     governor (Rafael Wysocki)

   - Improve the performance of cpufreq_stats_create_table() in some
     cases (Liao Chang)

   - Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)

   - Use clamp() helper macro to improve the code readability in
     cpufreq_verify_within_limits() (Liao Chang)

   - Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)

   - Migrate cpufreq drivers for various platforms to use void remove
     callback (Yangtao Li)

   - Add online/offline/exit hooks for Tegra driver (Sumit Gupta)

   - Explicitly include correct DT includes in cpufreq (Rob Herring)

   - Frequency domain updates for qcom-hw driver (Neil Armstrong)

   - Modify AMD pstate driver return the highest_perf value (Meng Li)

   - Generic cleanups for cppc, mediatek and powernow driver (Liao
     Chang, Konrad Dybcio)

   - Add more platforms to cpufreq-arm driver's blocklist
     (AngeloGioacchino Del Regno and Konrad Dybcio)

   - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)

   - Add device PM helpers to allow a device to remain powered-on during
     system-wide transitions (Ulf Hansson)

   - Rework hibernation memory snapshotting to avoid storing pages
     filled with zeros in hibernation image files (Brian Geffon)

   - Add check to make sure that CPU latency QoS constraints do not use
     negative values (Clive Lin)

   - Optimize rp->domains memory allocation in the Intel RAPL power
     capping driver (xiongxin)

   - Remove recursion while parsing zones in the arm_scmi power capping
     driver (Cristian Marussi)

   - Fix memory leak in devfreq_dev_release() (Boris Brezillon)

   - Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
     Sadhasivam)

   - Explicitly include correct DT includes in devfreq (Rob Herring)

   - Remove unsued pm_runtime_update_max_time_suspended() extern
     declaration (YueHaibing)

   - Add turbo-boost support to cpupower (Wyes Karny)

   - Add support for amd_pstate mode change to cpupower (Wyes Karny)

   - Fix 'cpupower idle_set' command to accept only numeric values of
     arguments (Likhitha Korrapati)

   - Clean up OPP code and add new frequency related APIs to it (Viresh
     Kumar, Manivannan Sadhasivam)

   - Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"

* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  cpufreq: tegra194: remove opp table in exit hook
  cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
  cpufreq: tegra194: add online/offline hooks
  cpuidle: teo: Avoid unnecessary variable assignments
  cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
  dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
  cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
  cpufreq: amd-pstate-ut: Remove module parameter access
  cpufreq: Use clamp() helper macro to improve the code readability
  PM: sleep: Add helpers to allow a device to remain powered-on
  PM: QoS: Add check to make sure CPU latency is non-negative
  PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
  cpufreq: intel_pstate: set stale CPU frequency to minimum
  cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
  dt-bindings: cpufreq: Convert ti-cpufreq to json schema
  dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
  OPP: Fix argument name in doc comment
  cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
  cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
  cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
  ...

Author: torvalds

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -49,13 +49,15 @@ properties:
       - description: Frequency domain 0 register region
       - description: Frequency domain 1 register region
       - description: Frequency domain 2 register region
+      - description: Frequency domain 3 register region
 
   reg-names:
     minItems: 1
     items:
       - const: freq-domain0
       - const: freq-domain1
       - const: freq-domain2
+      - const: freq-domain3
 
   clocks:
     items:
@@ -69,14 +71,15 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   interrupt-names:
     minItems: 1
     items:
       - const: dcvsh-irq-0
       - const: dcvsh-irq-1
       - const: dcvsh-irq-2
+      - const: dcvsh-irq-3
 
   '#freq-domain-cells':
     const: 1

Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt

@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CPU OPP (Operating Performance Points)
+
+description:
+  TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx
+  families, the CPU frequencies subset and the voltage value of each
+  OPP vary based on the silicon variant used. The data sheet sections
+  corresponding to "Operating Performance Points" describe the frequency
+  and voltage values based on device type and speed bin information
+  blown in corresponding eFuse bits as referred to by the Technical
+  Reference Manual.
+
+  This document extends the operating-points-v2 binding by providing
+  the hardware description for the scheme mentioned above.
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-ti-cpu
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      points to syscon node representing the control module
+      register space of the SoC.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp(-?[0-9]+)*$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      clock-latency-ns: true
+      opp-hz: true
+      opp-microvolt: true
+      opp-supported-hw: true
+      opp-suspend: true
+      turbo-mode: true
+
+    required:
+      - opp-hz
+      - opp-supported-hw
+
+required:
+  - compatible
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    opp-table {
+        compatible = "operating-points-v2-ti-cpu";
+        syscon = <&scm_conf>;
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x06 0x0020>;
+            opp-suspend;
+        };
+
+        opp-500000000 {
+            opp-hz = /bits/ 64 <500000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x01 0xFFFF>;
+        };
+
+        opp-600000000 {
+            opp-hz = /bits/ 64 <600000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x06 0x0040>;
+        };
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <1325000 1298500 1351500>;
+            opp-supported-hw = <0x04 0x0200>;
+        };
+    };

Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml

@@ -56,7 +56,7 @@ patternProperties:
           need to be configured and that is left for the implementation
           specific binding.
         minItems: 1
-        maxItems: 16
+        maxItems: 32
         items:
           maxItems: 1
 

Documentation/devicetree/bindings/opp/opp-v2-base.yaml

@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OMAP compatible OPP supply
+
+description:
+  OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse
+  registers, which contain OPP-specific voltage information tailored
+  for the specific device. This binding provides the information
+  needed to describe such a hardware values and relate them to program
+  the primary regulator during an OPP transition.
+
+  Also, some supplies may have an associated vbb-supply, an Adaptive
+  Body Bias regulator, which must transition in a specific sequence
+  w.r.t the vdd-supply and clk when making an OPP transition. By
+  supplying two regulators to the device that will undergo OPP
+  transitions, we can use the multi-regulator support implemented by
+  the OPP core to describe both regulators the platform needs. The
+  OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml
+  provides further information (refer to Example 4 Handling multiple
+  regulators).
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+properties:
+  $nodename:
+    pattern: '^opp-supply(@[0-9a-f]+)?$'
+
+  compatible:
+    oneOf:
+      - description: Basic OPP supply controlling VDD and VBB
+        const: ti,omap-opp-supply
+      - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with
+          VBB.
+        const: ti,omap5-opp-supply
+      - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB
+        const: ti,omap5-core-opp-supply
+
+  reg:
+    maxItems: 1
+
+  ti,absolute-max-voltage-uv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Absolute maximum voltage for the OPP supply in micro-volts.
+    minimum: 750000
+    maximum: 1500000
+
+  ti,efuse-settings:
+    description: An array of u32 tuple items providing information about
+      optimized efuse configuration.
+    minItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Reference voltage in micro-volts (OPP Voltage)
+          minimum: 750000
+          maximum: 1500000
+          multipleOf: 10000
+        - description: efuse offset where the optimized voltage is located
+          multipleOf: 4
+          maximum: 256
+
+required:
+  - compatible
+  - ti,absolute-max-voltage-uv
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: ti,omap-opp-supply
+    then:
+      required:
+        - reg
+        - ti,efuse-settings
+
+additionalProperties: false
+
+examples:
+  - |
+    opp-supply {
+        compatible = "ti,omap-opp-supply";
+        ti,absolute-max-voltage-uv = <1375000>;
+    };
+  - |
+    opp-supply@4a003b20 {
+        compatible = "ti,omap5-opp-supply";
+        reg = <0x4a003b20 0x8>;
+        ti,efuse-settings =
+            /* uV   offset */
+            <1060000 0x0>,
+            <1160000 0x4>,
+            <1210000 0x8>;
+        ti,absolute-max-voltage-uv = <1500000>;
+    };