Merge tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

torvalds · torvalds · commit b1dd6c26bca4 · 2024-02-02T12:56:56.000-08:00
Pull pci fixes from Bjorn Helgaas:

 - Fix a potential deadlock that was reintroduced by an ASPM revert
   merged for v6.8 (Johan Hovold)

 - Add Manivannan Sadhasivam as PCI Endpoint maintainer (Lorenzo
   Pieralisi)

* tag 'pci-v6.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Manivannan Sadhasivam as PCI Endpoint maintainer
  PCI/ASPM: Fix deadlock when enabling ASPM
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -16862,9 +16862,8 @@ F:	Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
 F:	drivers/pci/controller/pcie-xilinx-cpm.c
 
 PCI ENDPOINT SUBSYSTEM
-M:	Lorenzo Pieralisi <lpieralisi@kernel.org>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 M:	Krzysztof Wilczyński <kw@linux.com>
-R:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 R:	Kishon Vijay Abraham I <kishon@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
@@ -386,29 +386,17 @@ void pci_bus_add_devices(const struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_add_devices);
 
-/** pci_walk_bus - walk devices on/under bus, calling callback.
- *  @top      bus whose devices should be walked
- *  @cb       callback to be called for each device found
- *  @userdata arbitrary pointer to be passed to callback.
- *
- *  Walk the given bus, including any bridged devices
- *  on buses under this bus.  Call the provided callback
- *  on each device found.
- *
- *  We check the return of @cb each time. If it returns anything
- *  other than 0, we break out.
- *
- */
-void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
-		  void *userdata)
+static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+			   void *userdata, bool locked)
 {
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	struct list_head *next;
 	int retval;
 
 	bus = top;
-	down_read(&pci_bus_sem);
+	if (!locked)
+		down_read(&pci_bus_sem);
 	next = top->devices.next;
 	for (;;) {
 		if (next == &bus->devices) {
@@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		if (retval)
 			break;
 	}
-	up_read(&pci_bus_sem);
+	if (!locked)
+		up_read(&pci_bus_sem);
+}
+
+/**
+ *  pci_walk_bus - walk devices on/under bus, calling callback.
+ *  @top: bus whose devices should be walked
+ *  @cb: callback to be called for each device found
+ *  @userdata: arbitrary pointer to be passed to callback
+ *
+ *  Walk the given bus, including any bridged devices
+ *  on buses under this bus.  Call the provided callback
+ *  on each device found.
+ *
+ *  We check the return of @cb each time. If it returns anything
+ *  other than 0, we break out.
+ */
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+	__pci_walk_bus(top, cb, userdata, false);
 }
 EXPORT_SYMBOL_GPL(pci_walk_bus);
 
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+	lockdep_assert_held(&pci_bus_sem);
+
+	__pci_walk_bus(top, cb, userdata, true);
+}
+EXPORT_SYMBOL_GPL(pci_walk_bus_locked);
+
 struct pci_bus *pci_bus_get(struct pci_bus *bus)
 {
 	if (bus)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -972,7 +972,7 @@ static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata)
 	 * Downstream devices need to be in D0 state before enabling PCI PM
 	 * substates.
 	 */
-	pci_set_power_state(pdev, PCI_D0);
+	pci_set_power_state_locked(pdev, PCI_D0);
 	pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
 
 	return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
@@ -1354,6 +1354,7 @@ int pci_power_up(struct pci_dev *dev)
 /**
  * pci_set_full_power_state - Put a PCI device into D0 and update its state
  * @dev: PCI device to power up
+ * @locked: whether pci_bus_sem is held
  *
  * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
  * to confirm the state change, restore its BARs if they might be lost and
@@ -1363,7 +1364,7 @@ int pci_power_up(struct pci_dev *dev)
  * to D0, it is more efficient to use pci_power_up() directly instead of this
  * function.
  */
-static int pci_set_full_power_state(struct pci_dev *dev)
+static int pci_set_full_power_state(struct pci_dev *dev, bool locked)
 {
 	u16 pmcsr;
 	int ret;
@@ -1399,7 +1400,7 @@ static int pci_set_full_power_state(struct pci_dev *dev)
 	}
 
 	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
+		pcie_aspm_pm_state_change(dev->bus->self, locked);
 
 	return 0;
 }
@@ -1428,10 +1429,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
 		pci_walk_bus(bus, __pci_dev_set_current_state, &state);
 }
 
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked)
+{
+	if (!bus)
+		return;
+
+	if (locked)
+		pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state);
+	else
+		pci_walk_bus(bus, __pci_dev_set_current_state, &state);
+}
+
 /**
  * pci_set_low_power_state - Put a PCI device into a low-power state.
  * @dev: PCI device to handle.
  * @state: PCI power state (D1, D2, D3hot) to put the device into.
+ * @locked: whether pci_bus_sem is held
  *
  * Use the device's PCI_PM_CTRL register to put it into a low-power state.
  *
@@ -1442,7 +1455,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
  * 0 if device already is in the requested state.
  * 0 if device's power state has been successfully changed.
  */
-static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
+static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
 {
 	u16 pmcsr;
 
@@ -1496,29 +1509,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
 				     pci_power_name(state));
 
 	if (dev->bus->self)
-		pcie_aspm_pm_state_change(dev->bus->self);
+		pcie_aspm_pm_state_change(dev->bus->self, locked);
 
 	return 0;
 }
 
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to handle.
- * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- *
- * Transition a device to a new power state, using the platform firmware and/or
- * the device's PCI PM registers.
- *
- * RETURN VALUE:
- * -EINVAL if the requested state is invalid.
- * -EIO if device does not support PCI PM or its PM capabilities register has a
- * wrong version, or device doesn't support the requested state.
- * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
- * 0 if device already is in the requested state.
- * 0 if the transition is to D3 but D3 is not supported.
- * 0 if device's power state has been successfully changed.
- */
-int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
 {
 	int error;
 
@@ -1542,7 +1538,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return 0;
 
 	if (state == PCI_D0)
-		return pci_set_full_power_state(dev);
+		return pci_set_full_power_state(dev, locked);
 
 	/*
 	 * This device is quirked not to be put into D3, so don't put it in
@@ -1556,25 +1552,55 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		 * To put the device in D3cold, put it into D3hot in the native
 		 * way, then put it into D3cold using platform ops.
 		 */
-		error = pci_set_low_power_state(dev, PCI_D3hot);
+		error = pci_set_low_power_state(dev, PCI_D3hot, locked);
 
 		if (pci_platform_power_transition(dev, PCI_D3cold))
 			return error;
 
 		/* Powering off a bridge may power off the whole hierarchy */
 		if (dev->current_state == PCI_D3cold)
-			pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+			__pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked);
 	} else {
-		error = pci_set_low_power_state(dev, state);
+		error = pci_set_low_power_state(dev, state, locked);
 
 		if (pci_platform_power_transition(dev, state))
 			return error;
 	}
 
 	return 0;
 }
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform firmware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
+ * 0 if device already is in the requested state.
+ * 0 if the transition is to D3 but D3 is not supported.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+	return __pci_set_power_state(dev, state, false);
+}
 EXPORT_SYMBOL(pci_set_power_state);
 
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{
+	lockdep_assert_held(&pci_bus_sem);
+
+	return __pci_set_power_state(dev, state, true);
+}
+EXPORT_SYMBOL(pci_set_power_state_locked);
+
 #define PCI_EXP_SAVE_REGS	7
 
 static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev,
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
@@ -571,12 +571,12 @@ int pcie_retrain_link(struct pci_dev *pdev, bool use_lt);
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
 #else
 static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
 static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
+static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
 static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
 #endif
 
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
@@ -1003,8 +1003,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
 	up_read(&pci_bus_sem);
 }
 
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+/*
+ * @pdev: the root port or switch downstream port
+ * @locked: whether pci_bus_sem is held
+ */
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked)
 {
 	struct pcie_link_state *link = pdev->link_state;
 
@@ -1014,12 +1017,14 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev)
 	 * Devices changed PM state, we should recheck if latency
 	 * meets all functions' requirement
 	 */
-	down_read(&pci_bus_sem);
+	if (!locked)
+		down_read(&pci_bus_sem);
 	mutex_lock(&aspm_lock);
 	pcie_update_aspm_capable(link->root);
 	pcie_config_aspm_path(link);
 	mutex_unlock(&aspm_lock);
-	up_read(&pci_bus_sem);
+	if (!locked)
+		up_read(&pci_bus_sem);
 }
 
 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
diff --git a/include/linux/pci.h b/include/linux/pci.h
@@ -1422,6 +1422,7 @@ int pci_load_and_free_saved_state(struct pci_dev *dev,
 				  struct pci_saved_state **state);
 int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
 bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
 void pci_pme_active(struct pci_dev *dev, bool enable);
@@ -1625,6 +1626,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
 
 void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		  void *userdata);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+			 void *userdata);
 int pci_cfg_space_size(struct pci_dev *dev);
 unsigned char pci_bus_max_busnr(struct pci_bus *bus);
 void pci_setup_bridge(struct pci_bus *bus);
@@ -2025,6 +2028,8 @@ static inline int pci_save_state(struct pci_dev *dev) { return 0; }
 static inline void pci_restore_state(struct pci_dev *dev) { }
 static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 { return 0; }
+static inline int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{ return 0; }
 static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
 { return 0; }
 static inline pci_power_t pci_choose_state(struct pci_dev *dev,
