powerpc/6xx: set High BAT Enable flag on G2_LE cores

MMU_FTR_USE_HIGH_BATS is set for G2_LE cores and derivatives like e300cX,
but the high BATs need to be enabled in HID2 to work. Add register
definitions and add the needed setup to __setup_cpu_603.

This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled
on systems where the flag has not been set by the bootloader already.

Fixes: e4d6654 ("powerpc/mm/32s: rework mmu_mapin_ram()")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124103838.43675-1-matthias.schiffer@ew.tq-group.com

Author: tq-schifferm

arch/powerpc/include/asm/reg.h

@@ -617,6 +617,8 @@
 #endif
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
 #define SPRN_HID2_GEKKO	0x398		/* Gekko HID2 Register */
+#define SPRN_HID2_G2_LE	0x3F3		/* G2_LE HID2 Register */
+#define  HID2_G2_LE_HBE	(1<<18)		/* High BAT Enable (G2_LE) */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #define SPRN_IABR2	0x3FA		/* 83xx */
 #define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */

arch/powerpc/kernel/cpu_setup_6xx.S

@@ -26,6 +26,15 @@ BEGIN_FTR_SECTION
 	bl	__init_fpu_registers
 END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
 	bl	setup_common_caches
+
+	/*
+	 * This assumes that all cores using __setup_cpu_603 with
+	 * MMU_FTR_USE_HIGH_BATS are G2_LE compatible
+	 */
+BEGIN_MMU_FTR_SECTION
+	bl      setup_g2_le_hid2
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+
 	mtlr	r5
 	blr
 _GLOBAL(__setup_cpu_604)
@@ -115,6 +124,16 @@ SYM_FUNC_START_LOCAL(setup_604_hid0)
 	blr
 SYM_FUNC_END(setup_604_hid0)
 
+/* Enable high BATs for G2_LE and derivatives like e300cX */
+SYM_FUNC_START_LOCAL(setup_g2_le_hid2)
+	mfspr	r11,SPRN_HID2_G2_LE
+	oris	r11,r11,HID2_G2_LE_HBE@h
+	mtspr	SPRN_HID2_G2_LE,r11
+	sync
+	isync
+	blr
+SYM_FUNC_END(setup_g2_le_hid2)
+
 /* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
  * erratas we work around here.
  * Moto MPC710CE.pdf describes them, those are errata
@@ -495,4 +514,3 @@ _GLOBAL(__restore_cpu_setup)
 	mtcr	r7
 	blr
 _ASM_NOKPROBE_SYMBOL(__restore_cpu_setup)
-