|
| 1 | +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| 2 | +%YAML 1.2 |
| 3 | +--- |
| 4 | +$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# |
| 5 | +$schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | + |
| 7 | +title: Goodix Berlin series touchscreen controller |
| 8 | + |
| 9 | +description: The Goodix Berlin series of touchscreen controllers |
| 10 | + be connected to either I2C or SPI buses. |
| 11 | + |
| 12 | +maintainers: |
| 13 | + - Neil Armstrong <neil.armstrong@linaro.org> |
| 14 | + |
| 15 | +allOf: |
| 16 | + - $ref: touchscreen.yaml# |
| 17 | + - $ref: /schemas/spi/spi-peripheral-props.yaml# |
| 18 | + |
| 19 | +properties: |
| 20 | + compatible: |
| 21 | + enum: |
| 22 | + - goodix,gt9916 |
| 23 | + |
| 24 | + reg: |
| 25 | + maxItems: 1 |
| 26 | + |
| 27 | + interrupts: |
| 28 | + maxItems: 1 |
| 29 | + |
| 30 | + reset-gpios: |
| 31 | + maxItems: 1 |
| 32 | + |
| 33 | + avdd-supply: |
| 34 | + description: Analog power supply regulator on AVDD pin |
| 35 | + |
| 36 | + vddio-supply: |
| 37 | + description: power supply regulator on VDDIO pin |
| 38 | + |
| 39 | + spi-max-frequency: true |
| 40 | + touchscreen-inverted-x: true |
| 41 | + touchscreen-inverted-y: true |
| 42 | + touchscreen-size-x: true |
| 43 | + touchscreen-size-y: true |
| 44 | + touchscreen-swapped-x-y: true |
| 45 | + |
| 46 | +additionalProperties: false |
| 47 | + |
| 48 | +required: |
| 49 | + - compatible |
| 50 | + - reg |
| 51 | + - interrupts |
| 52 | + - avdd-supply |
| 53 | + - touchscreen-size-x |
| 54 | + - touchscreen-size-y |
| 55 | + |
| 56 | +examples: |
| 57 | + - | |
| 58 | + #include <dt-bindings/interrupt-controller/irq.h> |
| 59 | + #include <dt-bindings/gpio/gpio.h> |
| 60 | + i2c { |
| 61 | + #address-cells = <1>; |
| 62 | + #size-cells = <0>; |
| 63 | + touchscreen@5d { |
| 64 | + compatible = "goodix,gt9916"; |
| 65 | + reg = <0x5d>; |
| 66 | + interrupt-parent = <&gpio>; |
| 67 | + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; |
| 68 | + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| 69 | + avdd-supply = <&ts_avdd>; |
| 70 | + touchscreen-size-x = <1024>; |
| 71 | + touchscreen-size-y = <768>; |
| 72 | + }; |
| 73 | + }; |
| 74 | + - | |
| 75 | + #include <dt-bindings/interrupt-controller/irq.h> |
| 76 | + #include <dt-bindings/gpio/gpio.h> |
| 77 | + spi { |
| 78 | + #address-cells = <1>; |
| 79 | + #size-cells = <0>; |
| 80 | + num-cs = <1>; |
| 81 | + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; |
| 82 | + touchscreen@0 { |
| 83 | + compatible = "goodix,gt9916"; |
| 84 | + reg = <0>; |
| 85 | + interrupt-parent = <&gpio>; |
| 86 | + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; |
| 87 | + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| 88 | + avdd-supply = <&ts_avdd>; |
| 89 | + spi-max-frequency = <1000000>; |
| 90 | + touchscreen-size-x = <1024>; |
| 91 | + touchscreen-size-y = <768>; |
| 92 | + }; |
| 93 | + }; |
| 94 | +
|
| 95 | +... |
0 commit comments