drm/panel: ltk050h3146w: Set burst mode for ltk050h3148w

The ltk050h3148w variant expects the horizontal component lane byte clock
cycle(lbcc) to be calculated using lane_mbps (burst mode) instead of the
pixel clock.
Using the pixel clock rate by default for this calculation was introduced
in commit ac87d23 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock
rate to calculate lbcc") and starting from commit 93e82bb
("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
only panels that support burst mode can keep using the lane_mbps. So add
MIPI_DSI_MODE_VIDEO_BURST as part of the mode_flags for the dsi host.

Fixes: 93e82bb ("drm/bridge: synopsys: dw-mipi-dsi: Fix hcomponent lbcc for burst mode")
Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213145045.41020-1-farouk.bouabid@theobroma-systems.com

Author: FaroukBouabid

drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c

@@ -326,7 +326,7 @@ static const struct drm_display_mode ltk050h3148w_mode = {
 static const struct ltk050h3146w_desc ltk050h3148w_data = {
 	.mode = &ltk050h3148w_mode,
 	.init = ltk050h3148w_init_sequence,
-	.mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_VIDEO_BURST,
 };
 
 static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)