spi: Merge up v6.13-rc6

This fixes the i.MX6 and newer Meson platforms in my CI.

Author: broonie

.mailmap

@@ -435,7 +435,7 @@ Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> <martyna.szapar-mudlaw@intel.com>
-Mathieu Othacehe <m.othacehe@gmail.com> <othacehe@gnu.org>
+Mathieu Othacehe <othacehe@gnu.org> <m.othacehe@gmail.com>
 Mat Martineau <martineau@kernel.org> <mathew.j.martineau@linux.intel.com>
 Mat Martineau <martineau@kernel.org> <mathewm@codeaurora.org>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
@@ -735,6 +735,7 @@ Wolfram Sang <wsa@kernel.org> <w.sang@pengutronix.de>
 Wolfram Sang <wsa@kernel.org> <wsa@the-dreams.de>
 Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yanteng Si <si.yanteng@linux.dev> <siyanteng@loongson.cn>
+Ying Huang <huang.ying.caritas@gmail.com> <ying.huang@intel.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Zack Rusin <zack.rusin@broadcom.com> <zackr@vmware.com>
 Zhu Yanjun <zyjzyj2000@gmail.com> <yanjunz@nvidia.com>

Documentation/admin-guide/kernel-parameters.txt

@@ -4822,6 +4822,11 @@
 			       can be preempted anytime.  Tasks will also yield
 			       contended spinlocks (if the critical section isn't
 			       explicitly preempt disabled beyond the lock itself).
+			lazy - Scheduler controlled. Similar to full but instead
+			       of preempting the task immediately, the task gets
+			       one HZ tick time to yield itself before the
+			       preemption will be forced. One preemption is when the
+			       task returns to user space.
 
 	print-fatal-signals=
 			[KNL] debug: print fatal signals

Documentation/admin-guide/laptops/thinkpad-acpi.rst

@@ -445,8 +445,10 @@ event	code	Key		Notes
 0x1008	0x07	FN+F8		IBM: toggle screen expand
 				Lenovo: configure UltraNav,
 				or toggle screen expand.
-				On newer platforms (2024+)
-				replaced by 0x131f (see below)
+				On 2024 platforms replaced by
+				0x131f (see below) and on newer
+				platforms (2025 +) keycode is
+				replaced by 0x1401 (see below).
 
 0x1009	0x08	FN+F9		-
 
@@ -506,9 +508,11 @@ event	code	Key		Notes
 
 0x1019	0x18	unknown
 
-0x131f	...	FN+F8	        Platform Mode change.
+0x131f	...	FN+F8		Platform Mode change (2024 systems).
 				Implemented in driver.
 
+0x1401	...	FN+F8		Platform Mode change (2025 + systems).
+				Implemented in driver.
 ...	...	...
 
 0x1020	0x1F	unknown

Documentation/admin-guide/mm/transhuge.rst

@@ -436,7 +436,7 @@ AnonHugePmdMapped).
 The number of file transparent huge pages mapped to userspace is available
 by reading ShmemPmdMapped and ShmemHugePages fields in ``/proc/meminfo``.
 To identify what applications are mapping file transparent huge pages, it
-is necessary to read ``/proc/PID/smaps`` and count the FileHugeMapped fields
+is necessary to read ``/proc/PID/smaps`` and count the FilePmdMapped fields
 for each mapping.
 
 Note that reading the smaps file is expensive and reading it

Documentation/admin-guide/pm/amd-pstate.rst

@@ -251,9 +251,7 @@ performance supported in `AMD CPPC Performance Capability <perf_cap_>`_).
 In some ASICs, the highest CPPC performance is not the one in the ``_CPC``
 table, so we need to expose it to sysfs. If boost is not active, but
 still supported, this maximum frequency will be larger than the one in
-``cpuinfo``. On systems that support preferred core, the driver will have
-different values for some cores than others and this will reflect the values
-advertised by the platform at bootup.
+``cpuinfo``.
 This attribute is read-only.
 
 ``amd_pstate_lowest_nonlinear_freq``

Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml

@@ -114,8 +114,9 @@ patternProperties:
           table that specifies the PPID to LIODN mapping. Needed if the PAMU is
           used.  Value is a 12 bit value where value is a LIODN ID for this JR.
           This property is normally set by boot firmware.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 0xfff
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - maximum: 0xfff
 
   '^rtic@[0-9a-f]+$':
     type: object
@@ -186,8 +187,9 @@ patternProperties:
               Needed if the PAMU is used.  Value is a 12 bit value where value
               is a LIODN ID for this JR. This property is normally set by boot
               firmware.
-            $ref: /schemas/types.yaml#/definitions/uint32
-            maximum: 0xfff
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - maximum: 0xfff
 
           fsl,rtic-region:
             description:

Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml

@@ -90,7 +90,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   "#sound-dai-cells":
     const: 0

Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml

@@ -82,7 +82,7 @@ examples:
 
         uimage@100000 {
             reg = <0x0100000 0x200000>;
-            compress = "lzma";
+            compression = "lzma";
         };
     };
 

Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml

@@ -113,11 +113,8 @@ allOf:
           maxItems: 1
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - fsl,imx95-usb-phy
+      required:
+        - orientation-switch
     then:
       $ref: /schemas/usb/usb-switch.yaml#
 

Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml

@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,qca6390-pmu
+      - qcom,wcn6750-pmu
       - qcom,wcn6855-pmu
       - qcom,wcn7850-pmu
 
@@ -27,6 +28,9 @@ properties:
   vddaon-supply:
     description: VDD_AON supply regulator handle
 
+  vddasd-supply:
+    description: VDD_ASD supply regulator handle
+
   vdddig-supply:
     description: VDD_DIG supply regulator handle
 
@@ -42,6 +46,9 @@ properties:
   vddio1p2-supply:
     description: VDD_IO_1P2 supply regulator handle
 
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 supply regulator handle
+
   vddrfa0p95-supply:
     description: VDD_RFA_0P95 supply regulator handle
 
@@ -51,12 +58,18 @@ properties:
   vddrfa1p3-supply:
     description: VDD_RFA_1P3 supply regulator handle
 
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
   vddrfa1p8-supply:
     description: VDD_RFA_1P8 supply regulator handle
 
   vddrfa1p9-supply:
     description: VDD_RFA_1P9 supply regulator handle
 
+  vddrfa2p2-supply:
+    description: VDD_RFA_2P2 supply regulator handle
+
   vddpcie1p3-supply:
     description: VDD_PCIE_1P3 supply regulator handle
 
@@ -119,6 +132,20 @@ allOf:
         - vddpcie1p3-supply
         - vddpcie1p9-supply
         - vddio-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,wcn6750-pmu
+    then:
+      required:
+        - vddaon-supply
+        - vddasd-supply
+        - vddpmu-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p7-supply
+        - vddrfa2p2-supply
   - if:
       properties:
         compatible: