Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

i2c-host updates for v6.13, part 1

Major Improvements and Refactoring:

 - All controllers using the 'remove_new' callback have been
   reverted to use the 'remove' callback.

 - Intel SCH controller underwent significant refactoring,
   this brings love and a modern look to the driver.

 - PIIX4 driver refactored to enable usage by other drivers
   (e.g., AMD ASF).

 - iMX/MXC improved message handling to reduce protocol overhead:
     Refactored DMA/non-DMA read/write and bus polling mechanisms
     to achieve this.

 - ACPI documentation for PIIX4.

New Features:

 - i2c-cadence added support for atomic transfers.
 - Qualcomm CII added support for a 32MHz serial engine clock.

Deprecated Features:

 - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
   somebody misses this, Jean will rewrite support using the proper
   i2c mux framework.

New Hardware Support:

 - Added support for:
   - Intel Panther Lake (new ID)
   - AMD ASF (new driver)
   - S32G2/S32G3 SoCs (new ID)
   - Realtek RTL I2C Controller (new driver)
   - HJMC01 DesignWare ACPI HID (new ID)
   - PIC64GX to Microchip Core (new ID)
   - Qualcomm SDM670 to Qualcomm CCI (new ID)

Author: Wolfram Sang

.mailmap

@@ -73,6 +73,8 @@ Andrey Ryabinin <ryabinin.a.a@gmail.com> <aryabinin@virtuozzo.com>
 Andrzej Hajda <andrzej.hajda@intel.com> <a.hajda@samsung.com>
 André Almeida <andrealmeid@igalia.com> <andrealmeid@collabora.com>
 Andy Adamson <andros@citi.umich.edu>
+Andy Chiu <andybnac@gmail.com> <andy.chiu@sifive.com>
+Andy Chiu <andybnac@gmail.com> <taochiu@synology.com>
 Andy Shevchenko <andy@kernel.org> <andy@smile.org.ua>
 Andy Shevchenko <andy@kernel.org> <ext-andriy.shevchenko@nokia.com>
 Anilkumar Kolli <quic_akolli@quicinc.com> <akolli@codeaurora.org>
@@ -197,18 +199,23 @@ Elliot Berman <quic_eberman@quicinc.com> <eberman@codeaurora.org>
 Enric Balletbo i Serra <eballetbo@kernel.org> <enric.balletbo@collabora.com>
 Enric Balletbo i Serra <eballetbo@kernel.org> <eballetbo@iseebcn.com>
 Erik Kaneda <erik.kaneda@intel.com> <erik.schmauss@intel.com>
-Eugen Hristev <eugen.hristev@collabora.com> <eugen.hristev@microchip.com>
+Eugen Hristev <eugen.hristev@linaro.org> <eugen.hristev@microchip.com>
+Eugen Hristev <eugen.hristev@linaro.org> <eugen.hristev@collabora.com>
 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> <ezequiel@collabora.com>
 Faith Ekstrand <faith.ekstrand@collabora.com> <jason@jlekstrand.net>
 Faith Ekstrand <faith.ekstrand@collabora.com> <jason.ekstrand@intel.com>
 Faith Ekstrand <faith.ekstrand@collabora.com> <jason.ekstrand@collabora.com>
+Fangrui Song <i@maskray.me> <maskray@google.com>
 Felipe W Damasio <felipewd@terra.com.br>
 Felix Kuhling <fxkuehl@gmx.de>
 Felix Moeller <felix@derklecks.de>
 Fenglin Wu <quic_fenglinw@quicinc.com> <fenglinw@codeaurora.org>
 Filipe Lautert <filipe@icewall.org>
 Finn Thain <fthain@linux-m68k.org> <fthain@telegraphics.com.au>
+Fiona Behrens <me@kloenk.dev>
+Fiona Behrens <me@kloenk.dev> <me@kloenk.de>
+Fiona Behrens <me@kloenk.dev> <fin@nyantec.com>
 Franck Bui-Huu <vagabon.xyz@gmail.com>
 Frank Rowand <frowand.list@gmail.com> <frank.rowand@am.sony.com>
 Frank Rowand <frowand.list@gmail.com> <frank.rowand@sony.com>
@@ -276,7 +283,7 @@ Jan Glauber <jan.glauber@gmail.com> <jglauber@cavium.com>
 Jan Kuliga <jtkuliga.kdev@gmail.com> <jankul@alatek.krakow.pl>
 Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@linux.intel.com>
 Jarkko Sakkinen <jarkko@kernel.org> <jarkko@profian.com>
-Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@tuni.fi>
+Jarkko Sakkinen <jarkko@kernel.org> <jarkko.sakkinen@parity.io>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgg@nvidia.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
@@ -300,6 +307,11 @@ Jens Axboe <axboe@kernel.dk> <axboe@fb.com>
 Jens Axboe <axboe@kernel.dk> <axboe@meta.com>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
 Jernej Skrabec <jernej.skrabec@gmail.com> <jernej.skrabec@siol.net>
+Jesper Dangaard Brouer <hawk@kernel.org> <brouer@redhat.com>
+Jesper Dangaard Brouer <hawk@kernel.org> <hawk@comx.dk>
+Jesper Dangaard Brouer <hawk@kernel.org> <jbrouer@redhat.com>
+Jesper Dangaard Brouer <hawk@kernel.org> <jdb@comx.dk>
+Jesper Dangaard Brouer <hawk@kernel.org> <netoptimizer@brouer.com>
 Jessica Zhang <quic_jesszhan@quicinc.com> <jesszhan@codeaurora.org>
 Jilai Wang <quic_jilaiw@quicinc.com> <jilaiw@codeaurora.org>
 Jiri Kosina <jikos@kernel.org> <jikos@jikos.cz>
@@ -653,6 +665,7 @@ Tomeu Vizoso <tomeu@tomeuvizoso.net> <tomeu.vizoso@collabora.com>
 Thomas Graf <tgraf@suug.ch>
 Thomas Körper <socketcan@esd.eu> <thomas.koerper@esd.eu>
 Thomas Pedersen <twp@codeaurora.org>
+Thorsten Blum <thorsten.blum@linux.dev> <thorsten.blum@toblux.com>
 Tiezhu Yang <yangtiezhu@loongson.cn> <kernelpatch@126.com>
 Tingwei Zhang <quic_tingwei@quicinc.com> <tingwei@codeaurora.org>
 Tirupathi Reddy <quic_tirupath@quicinc.com> <tirupath@codeaurora.org>

CREDITS

@@ -1204,6 +1204,10 @@ S: Dreisbachstrasse 24
 S: D-57250 Netphen
 S: Germany
 
+N: Florian Fainelli
+E: f.fainelli@gmail.com
+D: DSA
+
 N: Rik Faith
 E: faith@acm.org
 D: Future Domain TMC-16x0 SCSI driver (author)
@@ -1358,10 +1362,6 @@ D: Major kbuild rework during the 2.5 cycle
 D: ISDN Maintainer
 S: USA
 
-N: Gerrit Renker
-E: gerrit@erg.abdn.ac.uk
-D: DCCP protocol support.
-
 N: Philip Gladstone
 E: philip@gladstonefamily.net
 D: Kernel / timekeeping stuff
@@ -1677,11 +1677,6 @@ W: http://www.carumba.com/
 D: bug toaster (A1 sauce makes all the difference)
 D: Random linux hacker
 
-N: James Hogan
-E: jhogan@kernel.org
-D: Metag architecture maintainer
-D: TZ1090 SoC maintainer
-
 N: Tim Hockin
 E: thockin@hockin.org
 W: http://www.hockin.org/~thockin
@@ -1697,6 +1692,11 @@ D: hwmon subsystem maintainer
 D: i2c-sis96x and i2c-stub SMBus drivers
 S: USA
 
+N: James Hogan
+E: jhogan@kernel.org
+D: Metag architecture maintainer
+D: TZ1090 SoC maintainer
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project
@@ -1872,6 +1872,10 @@ S: K osmidomkum 723
 S: 160 00 Praha 6
 S: Czech Republic
 
+N: Seth Jennings
+E: sjenning@redhat.com
+D: Creation and maintenance of zswap
+
 N: Jeremy Kerr
 D: Maintainer of SPU File System
 
@@ -2188,19 +2192,6 @@ N: Mike Kravetz
 E: mike.kravetz@oracle.com
 D: Maintenance and development of the hugetlb subsystem
 
-N: Seth Jennings
-E: sjenning@redhat.com
-D: Creation and maintenance of zswap
-
-N: Dan Streetman
-E: ddstreet@ieee.org
-D: Maintenance and development of zswap
-D: Creation and maintenance of the zpool API
-
-N: Vitaly Wool
-E: vitaly.wool@konsulko.com
-D: Maintenance and development of zswap
-
 N: Andreas S. Krebs
 E: akrebs@altavista.net
 D: CYPRESS CY82C693 chipset IDE, Digital's PC-Alpha 164SX boards
@@ -3191,6 +3182,11 @@ N: Ken Pizzini
 E: ken@halcyon.com
 D: CDROM driver "sonycd535" (Sony CDU-535/531)
 
+N: Mathieu Poirier
+E: mathieu.poirier@linaro.org
+D: CoreSight kernel subsystem, Maintainer 2014-2022
+D: Perf tool support for CoreSight
+
 N: Stelian Pop
 E: stelian@popies.net
 P: 1024D/EDBB6147 7B36 0E07 04BC 11DC A7A0  D3F7 7185 9E7A EDBB 6147
@@ -3300,6 +3296,10 @@ S: Schlossbergring 9
 S: 79098 Freiburg
 S: Germany
 
+N: Gerrit Renker
+E: gerrit@erg.abdn.ac.uk
+D: DCCP protocol support.
+
 N: Thomas Renninger
 E: trenn@suse.de
 D: cpupowerutils
@@ -3576,11 +3576,6 @@ D: several improvements to system programs
 S: Oldenburg
 S: Germany
 
-N: Mathieu Poirier
-E: mathieu.poirier@linaro.org
-D: CoreSight kernel subsystem, Maintainer 2014-2022
-D: Perf tool support for CoreSight
-
 N: Robert Schwebel
 E: robert@schwebel.de
 W: https://www.schwebel.de
@@ -3771,6 +3766,11 @@ S: Chr. Winthersvej 1 B, st.th.
 S: DK-1860 Frederiksberg C
 S: Denmark
 
+N: Dan Streetman
+E: ddstreet@ieee.org
+D: Maintenance and development of zswap
+D: Creation and maintenance of the zpool API
+
 N: Drew Sullivan
 E: drew@ss.org
 W: http://www.ss.org/
@@ -4286,6 +4286,10 @@ S: Pipers Way
 S: Swindon. SN3 1RJ
 S: England
 
+N: Vitaly Wool
+E: vitaly.wool@konsulko.com
+D: Maintenance and development of zswap
+
 N: Chris Wright
 E: chrisw@sous-sol.org
 D: hacking on LSM framework and security modules.

Documentation/admin-guide/LSM/ipe.rst

@@ -223,7 +223,10 @@ are signed through the PKCS#7 message format to enforce some level of
 authorization of the policies (prohibiting an attacker from gaining
 unconstrained root, and deploying an "allow all" policy). These
 policies must be signed by a certificate that chains to the
-``SYSTEM_TRUSTED_KEYRING``. With openssl, the policy can be signed by::
+``SYSTEM_TRUSTED_KEYRING``, or to the secondary and/or platform keyrings if
+``CONFIG_IPE_POLICY_SIG_SECONDARY_KEYRING`` and/or
+``CONFIG_IPE_POLICY_SIG_PLATFORM_KEYRING`` are enabled, respectively.
+With openssl, the policy can be signed by::
 
    openssl smime -sign \
       -in "$MY_POLICY" \
@@ -266,7 +269,7 @@ in the kernel. This file is write-only and accepts a PKCS#7 signed
 policy. Two checks will always be performed on this policy: First, the
 ``policy_names`` must match with the updated version and the existing
 version. Second the updated policy must have a policy version greater than
-or equal to the currently-running version. This is to prevent rollback attacks.
+the currently-running version. This is to prevent rollback attacks.
 
 The ``delete`` file is used to remove a policy that is no longer needed.
 This file is write-only and accepts a value of ``1`` to delete the policy.

Documentation/admin-guide/kernel-parameters.txt

@@ -6688,7 +6688,7 @@
 			0: no polling (default)
 
 	thp_anon=	[KNL]
-			Format: <size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>
+			Format: <size>[KMG],<size>[KMG]:<state>;<size>[KMG]-<size>[KMG]:<state>
 			state is one of "always", "madvise", "never" or "inherit".
 			Control the default behavior of the system with respect
 			to anonymous transparent hugepages.

Documentation/admin-guide/mm/transhuge.rst

@@ -303,7 +303,7 @@ control by passing the parameter ``transparent_hugepage=always`` or
 kernel command line.
 
 Alternatively, each supported anonymous THP size can be controlled by
-passing ``thp_anon=<size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>``,
+passing ``thp_anon=<size>[KMG],<size>[KMG]:<state>;<size>[KMG]-<size>[KMG]:<state>``,
 where ``<size>`` is the THP size (must be a power of 2 of PAGE_SIZE and
 supported anonymous THP)  and ``<state>`` is one of ``always``, ``madvise``,
 ``never`` or ``inherit``.

Documentation/admin-guide/pm/cpufreq.rst

@@ -425,8 +425,8 @@ This governor exposes only one tunable:
 
 ``rate_limit_us``
 	Minimum time (in microseconds) that has to pass between two consecutive
-	runs of governor computations (default: 1000 times the scaling driver's
-	transition latency).
+	runs of governor computations (default: 1.5 times the scaling driver's
+	transition latency or the maximum 2ms).
 
 	The purpose of this tunable is to reduce the scheduler context overhead
 	of the governor which might be excessive without it.
@@ -474,17 +474,17 @@ This governor exposes the following tunables:
 	This is how often the governor's worker routine should run, in
 	microseconds.
 
-	Typically, it is set to values of the order of 10000 (10 ms).  Its
-	default value is equal to the value of ``cpuinfo_transition_latency``
-	for each policy this governor is attached to (but since the unit here
-	is greater by 1000, this means that the time represented by
-	``sampling_rate`` is 1000 times greater than the transition latency by
-	default).
+	Typically, it is set to values of the order of 2000 (2 ms).  Its
+	default value is to add a 50% breathing room
+	to ``cpuinfo_transition_latency`` on each policy this governor is
+	attached to. The minimum is typically the length of two scheduler
+	ticks.
 
 	If this tunable is per-policy, the following shell command sets the time
-	represented by it to be 750 times as high as the transition latency::
+	represented by it to be 1.5 times as high as the transition latency
+	(the default)::
 
-	# echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate
+	# echo `$(($(cat cpuinfo_transition_latency) * 3 / 2)) > ondemand/sampling_rate
 
 ``up_threshold``
 	If the estimated CPU load is above this value (in percent), the governor

Documentation/core-api/protection-keys.rst

@@ -12,7 +12,10 @@ Pkeys Userspace (PKU) is a feature which can be found on:
         * Intel server CPUs, Skylake and later
         * Intel client CPUs, Tiger Lake (11th Gen Core) and later
         * Future AMD CPUs
+        * arm64 CPUs implementing the Permission Overlay Extension (FEAT_S1POE)
 
+x86_64
+======
 Pkeys work by dedicating 4 previously Reserved bits in each page table entry to
 a "protection key", giving 16 possible keys.
 
@@ -28,6 +31,22 @@ register.  The feature is only available in 64-bit mode, even though there is
 theoretically space in the PAE PTEs.  These permissions are enforced on data
 access only and have no effect on instruction fetches.
 
+arm64
+=====
+
+Pkeys use 3 bits in each page table entry, to encode a "protection key index",
+giving 8 possible keys.
+
+Protections for each key are defined with a per-CPU user-writable system
+register (POR_EL0).  This is a 64-bit register encoding read, write and execute
+overlay permissions for each protection key index.
+
+Being a CPU register, POR_EL0 is inherently thread-local, potentially giving
+each thread a different set of protections from every other thread.
+
+Unlike x86_64, the protection key permissions also apply to instruction
+fetches.
+
 Syscalls
 ========
 
@@ -38,11 +57,10 @@ There are 3 system calls which directly interact with pkeys::
 	int pkey_mprotect(unsigned long start, size_t len,
 			  unsigned long prot, int pkey);
 
-Before a pkey can be used, it must first be allocated with
-pkey_alloc().  An application calls the WRPKRU instruction
-directly in order to change access permissions to memory covered
-with a key.  In this example WRPKRU is wrapped by a C function
-called pkey_set().
+Before a pkey can be used, it must first be allocated with pkey_alloc().  An
+application writes to the architecture specific CPU register directly in order
+to change access permissions to memory covered with a key.  In this example
+this is wrapped by a C function called pkey_set().
 ::
 
 	int real_prot = PROT_READ|PROT_WRITE;
@@ -64,9 +82,9 @@ is no longer in use::
 	munmap(ptr, PAGE_SIZE);
 	pkey_free(pkey);
 
-.. note:: pkey_set() is a wrapper for the RDPKRU and WRPKRU instructions.
-          An example implementation can be found in
-          tools/testing/selftests/x86/protection_keys.c.
+.. note:: pkey_set() is a wrapper around writing to the CPU register.
+          Example implementations can be found in
+          tools/testing/selftests/mm/pkey-{arm64,powerpc,x86}.h
 
 Behavior
 ========
@@ -96,3 +114,7 @@ with a read()::
 The kernel will send a SIGSEGV in both cases, but si_code will be set
 to SEGV_PKERR when violating protection keys versus SEGV_ACCERR when
 the plain mprotect() permissions are violated.
+
+Note that kernel accesses from a kthread (such as io_uring) will use a default
+value for the protection key register and so will not be consistent with
+userspace's value of the register or mprotect().

Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/elgin,jg10309-01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elgin JG10309-01 SPI-controlled display
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The Elgin JG10309-01 SPI-controlled display is used on the RV1108-Elgin-r1
+  board and is a custom display.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: elgin,jg10309-01
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "elgin,jg10309-01";
+            reg = <0>;
+            spi-max-frequency = <24000000>;
+            spi-cpha;
+            spi-cpol;
+        };
+    };