FileNotFoundError: [WinError 3] The system cannot find the path specified: 'workplace\\wp001'

[altaflone]

This is the error I get when I try to execute the preprocessor.py

can anyone help

[RitioL]

Hi, @altaflone,

You can update the 'root_path' in your config.json file to match your absolute path.

For reference, here’s mine: "root_path": "C:/Users/73668/Desktop/test/PolyFatigueCrackSim-main/workplace".

[altaflone]

Thank you for your response. i am stuck on this since few days.

so the preprocessor file has to be copied to the workplace folder? do i have to run it through ABAQUS CAE using the "run script" option?

[RitioL]

1."the preprocessor file has to be copied to the workplace folder?": No, you don't have to. Just make sure you specifiying the 'root_path' in config.json.

2."do i have to run it through ABAQUS CAE using the "run script" option?": I usually run these scripts using a Python code editor like VS Code. A Python package Abqpy is reqiured to run them. You can check it out here: https://hailin.wang/abqpy/en/2022/ or https://pypi.org/project/abqpy/

[altaflone]

So, i set my config.jason file like this ..

{
"root_path": "C:/PolyFatigueCrackSim-main/workplace",
"smooth_grain_boundary": false,
"ori_seed": 1
}

1. i went to simulation_utils folder to run the scriptGenerator file.

i got the error that config.jason file is not available

so, i copied the config.jason file to the simulation_utils folder and the scriptGenerator.py worked fine using Spyder editor.

2. then i used Ubuntu command line to locate the neper.sh

command ./neper.sh also worked fine.

3. then i executed editInp1.py from simulation_utils folder using spyder and it also worked fine.

4. then i executed preprocessor.py from simulation_utils folder using spyder. their was one error that "their is no module named anaqus"

so i exected through ABAQUS and i got the error as i have attached below.

kindly help to resolve this eror.

Thank you

Altaf

[RitioL]

“4.then i executed preprocessor.py from simulation_utils folder using spyder. their was one error that "their is no module named anaqus"”: It looks like Abqpy isn’t installed in your Python environment. You can install the Python packages listed in requirements.txt. Google this might help: "how to install python packages in spyder"

[altaflone]

Thank You for valuable advise and direction.

I installed AbqPy and also set its environment. the spyder recognized the abaqus command.

however after executing the preprocessor.py file from the simulation_utils folder using the spyder , i got the following error.

runfile('C:/PolyFatigueCrackSim-main/simulation_utils/preprocessor.py', wdir='C:/PolyFatigueCrackSim-main/simulation_utils')
Traceback (most recent call last):

File ~\anaconda3\Lib\site-packages\spyder_kernels\py3compat.py:356 in compat_exec
exec(code, globals, locals)

File c:\polyfatiguecracksim-main\simulation_utils\preprocessor.py:182
main(wp_path, model_name)

File c:\polyfatiguecracksim-main\simulation_utils\preprocessor.py:41 in main
mdb.ModelFromInputFile(name=modelName, inputFileName=inputFileName)

AttributeError: 'Mdb' object has no attribute 'ModelFromInputFile'

kindly do help with this issue, sir

regards

altaf

[RitioL]

I noticed that you’re using Abaqus 2021, while I’m on 2022. This might help: pip install abqpy==2021.*

[altaflone]

i am using the compatible abqpy version that is 2021. still i am getting this error when i run preprocessor.py file using spyder.

kindly help resoving this issue.

i have attached the error below.

runfile('C:/PolyFatigueCrackSim-main/simulation_utils/preprocessor.py', wdir='C:/PolyFatigueCrackSim-main/simulation_utils')
Traceback (most recent call last):

File ~\anaconda3\Lib\site-packages\spyder_kernels\py3compat.py:356 in compat_exec
exec(code, globals, locals)

File c:\polyfatiguecracksim-main\simulation_utils\preprocessor.py:182
main(wp_path, model_name)

File c:\polyfatiguecracksim-main\simulation_utils\preprocessor.py:41 in main
mdb.ModelFromInputFile(name=modelName, inputFileName=inputFileName)

AttributeError: 'Mdb' object has no attribute 'ModelFromInputFile'

[altaflone]

i have checked all the requirements. all the requirements are already installed.

when i try to execute the preprocessor.py command through spyder in the simulation_util folder i get the following error.

runfile('C:/PolyFatigueCrackSim-main/simulation_utils/preprocessor.py', wdir='C:/PolyFatigueCrackSim-main/simulation_utils')
Traceback (most recent call last):

File ~\anaconda3\Lib\site-packages\spyder_kernels\py3compat.py:356 in compat_exec
exec(code, globals, locals)

File c:\polyfatiguecracksim-main\simulation_utils\preprocessor.py:182
main(wp_path, model_name)

File c:\polyfatiguecracksim-main\simulation_utils\preprocessor.py:41 in main
mdb.ModelFromInputFile(name=modelName, inputFileName=inputFileName)

AttributeError: 'Mdb' object has no attribute 'ModelFromInputFile'

kindly guide as to what could be the reasons for this error and how to handle this error.

regards

altaf

[RitioL]

Hi, @altaflone ,

I tried the Abqpy package (2021) with my Abaqus (2022), and it worked fine. I'm not sure if this is due to Abaqus itself. If possible, you could try updating your Abaqus to version 2022 and see if that helps.

[altaflone]

i was able to execute preprocessor.py in ABAQUS environment. however, i had to delete the "numThreadsPerMpiProcess" (line 154).

I will also try to run from VS or Pycharm and see if that works instead of Spyder.

Thank You

altaf

[altaflone]

Hello Sir

I am trying to insert cohesive elements across the grains of polycrystal obtained.

However, it is much easier with triangular elements.

Can the type of elements be changed from CPE4 (Default) to CPS3?

Thank You

altaf

[RitioL]

Try this, and "-cl" needs to be modified. You can check other hyperparameters on Neper's official website.

[altaflone]

i used the elttype as tri and repleaced -cl with -rcl

i got the following error when i executed the editInp1.inp command.

runfile('C:/PolyFatigueCrackSim-main/simulation_utils/editInp1.py', wdir='C:/PolyFatigueCrackSim-main/simulation_utils')
Num of Grains: -1
Traceback (most recent call last):

File ~\anaconda3\Lib\site-packages\spyder_kernels\py3compat.py:356 in compat_exec
exec(code, globals, locals)

File c:\polyfatiguecracksim-main\simulation_utils\editinp1.py:21
inpModifier(src, new, part_name="Notched", ori_seed=ori_seed)

File C:\PolyFatigueCrackSim-main\simulation_utils\inpEditor.py:277 in inpModifier
ori = getRandomOrientation(grainN, ori_seed)

File C:\PolyFatigueCrackSim-main\simulation_utils\inpEditor.py:117 in getRandomOrientation
phi1 = np.random.uniform(0, 360, size=(grainN, 1))

File numpy\random\mtrand.pyx:1158 in numpy.random.mtrand.RandomState.uniform

File _common.pyx:636 in numpy.random._common.cont

ValueError: negative dimensions are not allowed

[altaflone]

Also, the time taken to execute the ./neper.sh command for one polycrystal increased may folds. i had to stop the programme after writing the first input file only.

also, the size of input file generated was very large, 61,00,000 kb.

Thank You Sir

Altaf