v240: GIGABYTE X870E AORUS PRO - Incomplete Fan Control with ITE IT8696E/AX + ITE IT87952E Combo

[SimonZerafa]

Hi,

v240: GIGABYTE X870E AORUS PRO - Incomplete Fan Control with ITE IT8696E/AX + ITE IT87952E Combo

As per the title, while earlier versions of FanControl with the LibreHardwareMonitor and WinIO control kernel driver did control this mainboard and also report the fan speed sensors correctly, with PawnIO this is not the case.

It seems that the sensors and fan speeds are detected and can be monitored, only some of the fan speeds can be controlled within FanControl.

I appreciate this is a new software configuration, so what can we do as FanControl users to improve this?

Can we supply information to either FanControl, LibreHardwareMonitor or PawnIO to improve the situation for all users? 😊

Kind Regards

Simon Zerafa
(https://infosec.exchange/deck/@simonzerafa)

[Rem0o]

namazso/PawnIO.Modules#26

[Arktorin]

Hi,

v240: Gigabyte X570 AORUS ULTRA motherboard with ITE IT8688E and ITE IT8792E Combo

All fans working but only half of the fans controlled by FanControl, and the RPM is not registered properly by FanControl. Still investigating what is controlling those fans right now because they are doing much higher RPM then the ones controlled by FanControl.
All fans are the same Arctic P12 Max. All fans are on the MB headers. They were working and registering RPM properly with the WinRing0 version.

Best Regards
Balazs Moro