Replies: 1 comment 6 replies
-
|
If it is routed to the motherboard with a single PWM header, you will be able to control all of them as one. |
Beta Was this translation helpful? Give feedback.
-
|
Yeah simply rewire the fans you want individual control directly to a motherboard sys_fan header. |
Beta Was this translation helpful? Give feedback.
-
|
Hey Remy, so the new computer is built, very happy with it. It's annoying i can't set up my fan control how i like it, tho. So the top exhaust fans and pump fans are detected, but vrm fan, which is labeled sys fan 1 in bios, is not for some reason. A bunch of other fans are also not detected. I have the front and bottom intakes wired to the antec flux fan hub(sys fan 6). All the fans come prewired to that hub by default. I did decide to wire the back exhaust fan directly to the mb, so i could have more control(sys fan 2). I'm guessing the fan hub is not detected properly by fan control ? What i don't understand is why the back exhaust fan is not detected ? If nothing else that should be visible by fan control, i mean it is wired directly to the mb. I have a b850 tomahawk max wifi, that's a pretty new board, maybe that could be a problem as well. I'm on the latest bios and chipset version.
|
Beta Was this translation helpful? Give feedback.
-
|
Once the below PR is merged , the next following build of FC should support your MB fully (or better at least). Not much you can do meanwhile but wait... |
Beta Was this translation helpful? Give feedback.
-
|
Thank you. Hopefully this will happen very soon :) |
Beta Was this translation helpful? Give feedback.
-
|
Is there something i can do to fix this myself, so i don't have to wait for the next build of FC ? |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Hi,
I'm building a new computer, and was wandering if the antec flux case is supported, when it comes to detecting fans ? They have an integrated pwm/argb fan controller on their case. The stock fans are wired to that hub by default. I was just wondering if in order for the fans to be detected by fan control, would i need to route the fans directly to the MB, or can i leave them plugged into the controller.
Sorry for the newb question. I'v never really dealt with controllers before, so i don't know how the integration with your app is. I do know that there are different plugins available for certain controllers on here from corsair and others, i just don't know if something like this would also be needed here.
Beta Was this translation helpful? Give feedback.
All reactions