endless black screen on Lumia 1320

[MotherofaDuck]

so after installing the windows build the system normally goes thru windeploy(takes 2 hours but eventually it will show "restarting" and if you wait it just bluescreens). After the boot manager the nokia logo shows up and then it goes to a blank screen. Sometimes it will restart by itself but it just hangs to the black screen. I'm now trying again and for now i'm at the windeploy screen(strangely the text appears for just a second then disappears)
i'm trying the generic infs since the nokia isnt technically supported yet and i only have this and a lumia 520

[MotherofaDuck]

windeploy part just finished now im gonna try to boot it again

[MotherofaDuck]

and now its at a black screen again

[MotherofaDuck]

ok i got it booting now, i had to disable the graphics driver by modifying this reg key
HKLM\SYSTEM\ControlSet001\services\QCDX\Start and set it to 4 (looks like same issues as #70, no wlan driver, no sound, a lot of unrecognized devices and no sensors )

strange that windeploy boots because i can touch the screen and see like the touch trail but when it reboots it just dies

[RedGreenBlue09]

can you send me the log file? The audio driver is not included though. I'll try to add support for it later.

[MotherofaDuck]

Sorry where is the log file?

[RedGreenBlue09]

Logs folder inside Installer folder.

[MotherofaDuck]

there it is

2025-05-03.log

my windows install is in italian so some parts of it are written in italian, i hope that doesnt cause any problems

[RedGreenBlue09]

Hi, can you test this:

1. Reboot to safe mode:
   bcdedit /store "C:\EFIESP\EFI\Microsoft\Boot\BCD" /set {current} safeboot Minimal
2. Restore the start value to 3
3. Update the GPU driver:
   Device Manager > Microsoft Basic Adapter > Update > Update Manually > Let me pick > Adreno
4. Reboot to normal mode:
   bcdedit /store "C:\EFIESP\EFI\Microsoft\Boot\BCD" /deletevalue {current} safeboot
5. Check if the GPU driver works correctly

[MotherofaDuck]

i rebooted to safe mode (in my case i had to type {default}) and when i rebooted i noticed that the adreno 305(Qualcomm Adreno 305 WDDM v1.2) was being picked up without installing anything but the "Generic Non-PnP Monitor" was showing an exclamation symbol

trying to install any driver always popped out this error

i remember having this exact issue when i tried installing windows 8.1 on a laptop but this monitor driver wasnt compatible and would result in the laptop just booting into a black screen. Windows worked tho, i managed to activate the narrator and it was working but the laptop screen was just off. Mabye its happening here too?

[MotherofaDuck]

i can't install any driver so i dont know what to do now. I'll just keep it in safe mode for now. If you need the instance path for the monitor driver that shows the exclamation mark its "DISPLAY\DEFAULT_MONITOR\1&8713BCA&0&UID0"

[MotherofaDuck]

damn i tried to shut it down and it just bluescreened

[RedGreenBlue09]

Uninstall the Adreno (don't tick uninstall driver software), then update.

[MotherofaDuck]

alright lemme try

[MotherofaDuck]

its taking an abnormally long time to uninstall the driver