Updated translations

Updated translations. Must be merged at the same time or after the "general.windowFocus" -> "general.windowFocused" change was made.

Author: CivilCorvid

BabbleApp/Locale/Afrikaans/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Recalibrate Address",
 	"general.recalibrateTooltip": "OSC address we use for recalibrating",
 	"general.uvcCameraSettings": "UVC Camera Settings",
-	"general.windowFocus": "Koppelvlak gepauseer",
 	"general.useRedChannel": "Use Red Channel",
 	"general.useRedChannelTooltip": "Uses only the red channel for Omnicept capture",
 	"general.xResolution": "X Resolution",
@@ -152,5 +151,9 @@
 	"general.theme.system": "System",
 	"general.theme.light": "Light",
 	"general.theme.dark": "Dark",
-	"general.useOSCQuery": "Use OSCQuery"
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/Dansk/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Genkalibrerings adresse",
 	"general.recalibrateTooltip": "OSC address we use for recalibrating",
 	"general.uvcCameraSettings": "UVC Camera Settings",
-	"general.windowFocus": "Grænseflade pausere",
 	"general.useRedChannel": "Use Red Channel",
 	"general.useRedChannelTooltip": "Uses only the red channel for Omnicept capture",
 	"general.xResolution": "X Resolution",
@@ -152,5 +151,9 @@
 	"general.theme.system": "System",
 	"general.theme.light": "Light",
 	"general.theme.dark": "Dark",
-	"general.useOSCQuery": "Use OSCQuery"
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/Deutsch/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Neukalibrierung Adresse",
 	"general.recalibrateTooltip": "OSC-Adresse, die wir zur Neukalibrierung verwenden",
 	"general.uvcCameraSettings": "UVC-Kameraeinstellungen",
-	"general.windowFocus": "Schnittstelle pausiert",
 	"general.useRedChannel": "Roten Farbkanal verwenden",
 	"general.useRedChannelTooltip": "Verwendet nur den roten Kanal für die Omnicept-Aufnahme",
 	"general.xResolution": "X-Achsenauflösung",
@@ -41,7 +40,7 @@
 	"warn.serialCapture": "Problem mit der seriellen Aufnahmequelle. Kamera wurde getrennt, warte auf erneute Verbindung",
 	"warn.backpressure1": "Aufnahmewarteschlange Rückstau von",
 	"warn.backpressure2": "Überprüfe auf Absturz oder Timingprobleme im Algorithmus",
-	"warn.oneEuroValues": "OneEuroFilter Werte müssen eine gültige Zahl sein",
+	"warn.oneEuroValues": "Ein Euro Filter Werte müssen eine gültige Zahl sein",
 	"info.moveToTrackingMode": "Wechsel zu Tracking Modus",
 	"info.moveToROIMode": "Wechsel zu ROI Modus",
 	"info.setROI": "Setze ROI",
@@ -75,7 +74,7 @@
 	"algorithm.modelOutputMultiplierTooltip": "Modellausgabemodifikator",
 	"algorithm.calibrationDeadzone": "Kalibrierungs-Totzone",
 	"algorithm.calibrationDeadzoneTooltip": "Offset der minimal kalibrierten Werte",
-	"algorithm.oneEuroFilterParameters": "OneEuroFilter Parameter",
+	"algorithm.oneEuroFilterParameters": "Ein Euro Filter Parameter",
 	"algorithm.minFrequencyCutoff": "Minimale Grenzfrequenz",
 	"algorithm.minFrequencyCutoffTooltip": "",
 	"algorithm.speedCoefficient": "Geschwindigkeitskoeffizient",
@@ -98,12 +97,12 @@
 	"camera.horizontalFlipTooltip": "Kamerabild horizontal spiegeln",
 	"camera.crop": "Bitte legen Sie einen Zuschnitt fest",
 	"camera.cameraAddress": "Kameraadresse",
-	"camera.cameraAddressTooltip": "Geben Sie die IP-Adresse oder den UVC-Port Ihrer Kamera ein. (Inklusive dem „http://“)",
+	"camera.cameraAddressTooltip": "Geben Sie die IP-Adresse oder den UVC - Port Ihrer Kamera ein. (Inklusive dem „http://“)",
 	"camera.refreshCameraList": "Liste aktualisieren",
 	"camera.saveAndRestartTracking": "Speichern und Tracking neu starten",
 	"camera.trackingMode": "Tracking-Modus",
 	"camera.trackingModeTooltip": "Gehen Sie hierhin, um Ihren Mund zu tracken",
-	"camera.croppingMode": "Zuschnittmodus",
+	"camera.croppingMode": "Ausschnitt Modus",
 	"camera.croppingModeToolTip": "Klicken Sie hier, um Ihren Mund zuzuschneiden",
 	"camera.waiting": "Warten auf Kameraadresse",
 	"camera.connecting": "Kamera wird Verbunden",
@@ -125,13 +124,13 @@
 	"babble.updateTo": "Bitte aktualisieren Sie auf",
 	"babble.downloadPage": "Download-Seite",
 	"babble.noToast": "Toast-Benachrichtigungen werden nicht unterstützt",
-	"babble.noInternet": "Konnte keine Verbindung zum Internet herstellen, Updatesuche übersprungen",
+	"babble.noInternet": "Konnte keine Verbindung zum Internet herstellen, Update-Suche übersprungen",
 	"babble.camPage": "Kamera",
 	"babble.settingsPage": "Einstellungen",
 	"babble.algoSettingsPage": "Algo-Einstellungen",
 	"babble.calibrationPage": "Kalibrierung",
 	"babble.exit": "Babble-App wird beendet",
-	"calibration.header": "Kalibrierungseinstellungen",
+	"calibration.header": "Kalibrierung",
 	"calibration.mode": "Kalibrierungs-Modus",
 	"calibration.modeTooltip": "Neutral = Beim Starten und Stoppen der Kalibrierung werden nur Mindestwerte festgelegt. Voll = Beim Starten der Kalibrierung werden Mindest- und Höchstwerte basierend auf den aufgezeichneten Werten festgelegt.",
 	"calibration.left": "Links",
@@ -141,7 +140,7 @@
 	"calibration.min": "Minimum",
 	"calibration.max": "Maximum",
 	"calibration.resetMin": "Minimum zurücksetzen",
-	"calibration.resetMinTooltip": "Minimumwerte zurücksetzen",
+	"calibration.resetMinTooltip": "Basiswert zurücksetzen",
 	"calibration.resetMax": "Maximum zurücksetzen",
 	"calibration.resetMaxTooltip": "Maximumwerte zurücksetzen",
 	"calibration.minLeftValue": "Minimale Links-werte",
@@ -152,5 +151,9 @@
 	"general.theme.system": "System",
 	"general.theme.light": "Light",
 	"general.theme.dark": "Dark",
-	"general.useOSCQuery": "Use OSCQuery"
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/English/locale.json

@@ -9,17 +9,13 @@
 	"general.addressTooltip": "IP address we send OSC data to",
 	"general.port": "Port",
 	"general.portTooltip": "OSC port we send data to",
-	"general.osc_delay_enable": "Enable OSC delay",
-	"general.osc_delay_seconds": "OSC delay in seconds:",
-	"general.disableCameraPreview": "Disable camera preview (everywhere)",
-	"general.receiver": "Receive functions",
-	"general.receiverTooltip": "Toggle OSC receive functions",
+	"general.receiver": "Receiver functions",
+	"general.receiverTooltip": "Toggle OSC receiver functions",
 	"general.receiverPort": "Receiver Port",
 	"general.receiverPortTooltip": "Port we receive OSC data from (used to recalibrate from within VRChat",
 	"general.recalibrate": "Recalibrate Address",
-	"general.recalibrateTooltip": "OSC address we use for recalibrating",
+	"general.recalibrateTooltip": "OSC address we use for recalibration",
 	"general.uvcCameraSettings": "UVC Camera Settings",
-	"general.windowFocus": "Interface Paused",
 	"general.useRedChannel": "Use Red Channel",
 	"general.useRedChannelTooltip": "Uses only the red channel for Omnicept capture",
 	"general.xResolution": "X Resolution",
@@ -30,34 +26,31 @@
 	"general.framerateTooltip": "Capture framerate. Default = 0",
 	"general.language": "Language Settings",
 	"general.languageInstructions": "Restart the Babble App to see your changes",
-	"general.languageTooltip": "Change the language",
+	"general.languageTooltip": "Change language",
 	"error.oscPort": "OSC port value must be an integer 0-65535",
 	"error.oscValue": "OSC port value cannot be empty and must be an integer 0-65535",
-	"error.notAnInt": "Not an Int",
+	"error.notAnInt": "Not an Integer",
 	"error.notAFloat": "Not a Float",
 	"error.improperTabValue": "Improper tab value",
 	"error.frame": "Problem while getting frame",
 	"error.size": "Size of frames to display are of unequal sizes",
 	"error.capture": "Frame capture issue detected",
-	"error.winmm": "Failed to load winmm",
-	"error.modelLoad": "Failed to load model:",
 	"warn.frameDrop": "Frame drop. Corrupted JPEG",
-	"warn.captureProblem": "Capture source problem, assuming camera disconnected, waiting for reconnect",
-	"warn.serialCapture": "Serial capture source problem, assuming camera disconnected, waiting for reconnect",
+	"warn.captureProblem": "Capture source problem, assuming camera disconnected, waiting to reconnect",
+	"warn.serialCapture": "Serial capture source problem, assuming camera disconnected, waiting to reconnect",
 	"warn.backpressure1": "CAPTURE QUEUE BACKPRESSURE OF",
 	"warn.backpressure2": "CHECK FOR CRASH OR TIMING ISSUES IN ALGORITHM",
 	"warn.oneEuroValues": "OneEuroFilter values must be a legal number",
-	"warn.timerRes": "Failed to set timer resolution:",
-	"info.moveToTrackingMode": "Moving to tracking mode",
-	"info.moveToROIMode": "Moving to ROI mode",
+	"info.moveToTrackingMode": "Changing to tracking mode",
+	"info.moveToROIMode": "Changing to ROI mode",
 	"info.setROI": "Set ROI",
 	"info.enabled": "Enabled",
 	"info.disabled": "Disabled",
 	"info.newValue": "New value",
 	"info.discardingSerial": "Discarding the serial buffer",
 	"info.refreshedCameraList": "Refreshed Camera List",
-	"info.ETVRConnected": "ETVR Serial Tracker device connected on",
-	"info.ETVRFailiure": "Failed to connect on",
+	"info.ETVRConnected": "ETVR Serial Tracker device connected to",
+	"info.ETVRFailiure": "Failed to connect to",
 	"info.enterCaptureOne": "Capture source",
 	"info.enterCaptureTwo": "not found, retrying...",
 	"info.exitCaptureThread": "Exiting capture thread",
@@ -91,7 +84,7 @@
 	"camera.rotation": "Rotation",
 	"camera.rotationTooltip": "Adjust the rotation of your cameras, make them level",
 	"camera.startCalibration": "Start Calibration",
-	"camera.startCalibrationTooltip": "Neutural Calibration: Hold a relaxed face, press [Start Calibration] and then press [Stop Calibraion]. \nFull Calibration: Press [Start Calibration] and make as many face movements as you can until it switches back to tracking mode or press [Stop Calibration]",
+	"camera.startCalibrationTooltip": "Neutral Calibration: Hold a relaxed face, press [Start Calibration] and then press [Stop Calibration]. \nFull Calibration: Press [Start Calibration] and make as many face movements as you can until it switches back to tracking mode or press [Stop Calibration]",
 	"camera.stopCalibration": "Stop Calibration",
 	"camera.stopCalibrationTooltip": "Stop calibration manually",
 	"camera.enableCalibration": "Enable Calibration",
@@ -114,7 +107,7 @@
 	"camera.waiting": "Waiting for camera address",
 	"camera.connecting": "Camera Connecting",
 	"camera.reconnecting": "Camera Reconnecting",
-	"camera.waitingOnMouthCrop": "Awating Mouth Crop",
+	"camera.waitingOnMouthCrop": "Awaiting Mouth Crop",
 	"camera.calibration": "Calibration",
 	"camera.tracking": "Tracking",
 	"config.noSettingsFile": "No settings file, using base settings",
@@ -124,17 +117,17 @@
 	"config.saved": "Config saved successfully",
 	"babble.latestVersion": "App is the latest version",
 	"babble.needUpdateOne": "You have app version",
-	"babble.needUpdateTwo": "installed. Please update to",
-	"babble.needUpdateThree": "for the newest features",
+	"babble.needUpdateTwo": "Installed. Please update to",
+	"babble.needUpdateThree": "For the newest features",
 	"babble.name": "Babble App",
 	"babble.updatePresent": "New Update Available",
 	"babble.updateTo": "Please update to",
 	"babble.downloadPage": "Download Page",
 	"babble.noToast": "Toast notifications not supported",
-	"babble.noInternet": "Internet connection failed, no update check occured",
+	"babble.noInternet": "Internet connection failed, no update check occurred",
 	"babble.camPage": "Cam",
 	"babble.settingsPage": "Settings",
-	"babble.algoSettingsPage": "Algo Settings",
+	"babble.algoSettingsPage": "Also Settings",
 	"babble.calibrationPage": "Calibration",
 	"babble.exit": "Exiting Babble App",
 	"calibration.header": "Calibration Settings",
@@ -153,5 +146,14 @@
 	"calibration.minLeftValue": "Min Left Value",
 	"calibration.maxLeftValue": "Max Left Value",
 	"calibration.minRightValue": "Min Right Value",
-	"calibration.maxRightValue": "Max Right Value"
+	"calibration.maxRightValue": "Max Right Value",
+	"general.theme": "Theme",
+	"general.theme.system": "System",
+	"general.theme.light": "Light",
+	"general.theme.dark": "Dark",
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/Español/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Dirección de recalibración",
 	"general.recalibrateTooltip": "Dirección OSC usada para recalibrar",
 	"general.uvcCameraSettings": "Ajustes de Cámara UVC",
-	"general.windowFocus": "Interfaz Pausada",
 	"general.useRedChannel": "Usar Canal Rojo",
 	"general.useRedChannelTooltip": "Usar solo el canal rojo para capturar con Omnicept",
 	"general.xResolution": "Resolución X",
@@ -36,15 +35,12 @@
 	"error.frame": "Problema al obtener fotogramas",
 	"error.size": "Los tamaños de los fotogramas para mostrar son de dimensiones desiguales",
 	"error.capture": "Detectado problema en la captura de fotogramas",
-	"error.winmm": "Error al cargar winmm",
-	"error.modelLoad": "Error al cargar Modelo:",
 	"warn.frameDrop": "Pérdida de fotogramas. JPEG dañado",
 	"warn.captureProblem": "Problema con la fuente de captura, se asume que la cámara está desconectada, esperando reconexión",
 	"warn.serialCapture": "Problema con la fuente de captura en serie, se asume que la cámara está desconectada, esperando reconexión",
 	"warn.backpressure1": "PRESIÓN EN LA COLA DE CAPTURA DE",
 	"warn.backpressure2": "COMPRUEBA POSIBLES PROBLEMAS DE CRASH O TIMING EN EL ALGORITMO",
 	"warn.oneEuroValues": "Los valores de OneEuroFilter deben ser un número válido",
-	"warn.timerRes": "Error al establecer la resolución del temporizador:",
 	"info.moveToTrackingMode": "Cambiando a modo de seguimiento",
 	"info.moveToROIMode": "Cambiando a modo de ROI",
 	"info.setROI": "Establecer ROI",
@@ -150,5 +146,14 @@
 	"calibration.minLeftValue": "Valor Mín Izquierda",
 	"calibration.maxLeftValue": "Valor Máx Izquierda",
 	"calibration.minRightValue": "Valor Mín Derecha",
-	"calibration.maxRightValue": "Valor Máx Derecha"
-}
+	"calibration.maxRightValue": "Valor Máx Derecha",
+	"general.theme": "Theme",
+	"general.theme.system": "System",
+	"general.theme.light": "Light",
+	"general.theme.dark": "Dark",
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
+}

BabbleApp/Locale/Française/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Adresse de recalibration",
 	"general.recalibrateTooltip": "Adresse OSC à utiliser pour la recalibration",
 	"general.uvcCameraSettings": "Paramètres de la Caméra UVC",
-	"general.windowFocus": "Interface en pause",
 	"general.useRedChannel": "Utiliser le canal Rouge",
 	"general.useRedChannelTooltip": "Utiliser uniquement le canal rouge pour la capture Omnicept",
 	"general.xResolution": "Résolution X",
@@ -152,5 +151,9 @@
 	"general.theme.system": "System",
 	"general.theme.light": "Light",
 	"general.theme.dark": "Dark",
-	"general.useOSCQuery": "Use OSCQuery"
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/Indonesian/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Kalibarsi ulang Address",
 	"general.recalibrateTooltip": "Alamat OSC kami gunakan untuk kalibrasi ulang",
 	"general.uvcCameraSettings": "Pengaturan Kamera UVC",
-	"general.windowFocus": "Antarmuka Dijeda",
 	"general.useRedChannel": "Gunakan Channel Merah",
 	"general.useRedChannelTooltip": "Hanya menggunakan channel merah untuk Omnicept capture",
 	"general.xResolution": "X Resolusi",
@@ -152,5 +151,9 @@
 	"general.theme.system": "Sistem",
 	"general.theme.light": "Terang",
 	"general.theme.dark": "Gelap",
-	"general.useOSCQuery": "Gunakan OSCQuery"
+	"general.useOSCQuery": "Gunakan OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/Italiano/locale.json

@@ -16,14 +16,13 @@
 	"general.recalibrate": "Ricalibra Indirizzo",
 	"general.recalibrateTooltip": "Indirizzo OSC che utilizziamo per ricalibrare",
 	"general.uvcCameraSettings": "Impostazioni Telecamera UVC",
-	"general.windowFocus": "Interfaccia in pausa",
 	"general.useRedChannel": "Usa Canale Rosso",
 	"general.useRedChannelTooltip": "Utilizza solo il canale rosso per la cattura Omnicept",
 	"general.xResolution": "Risoluzione X",
 	"general.xResolutionTooltip": "Risoluzione acquisizione X. Predefinito = 0",
 	"general.yResolution": "Risoluzione Y",
 	"general.yResolutionTooltip": "Risoluzione acquisizione Y. Predefinito = 0",
-	"general.framerate": "Frequenza dei fotogrammi\n\n",
+	"general.framerate": "Frequenza dei fotogrammi",
 	"general.framerateTooltip": "Acquisisci frequenza dei fotogrammi. Predefinito = 0",
 	"general.language": "Impostazioni Lingua",
 	"general.languageInstructions": "Riavvia l'app Babble per vedere i tuoi cambiamenti",
@@ -152,5 +151,9 @@
 	"general.theme.system": "Sistema",
 	"general.theme.light": "Chiaro",
 	"general.theme.dark": "Scuro",
-	"general.useOSCQuery": "Usa OSCQuery"
+	"general.useOSCQuery": "Usa OSCQuery",
+	"general.windowFocused": "Finestra Attiva",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }

BabbleApp/Locale/Nederlands/locale.json

@@ -16,7 +16,6 @@
 	"general.recalibrate": "Herkalibratie adres",
 	"general.recalibrateTooltip": "OSC-adres die we gebruiken voor het herkalibreren",
 	"general.uvcCameraSettings": "UVC Camera Instellingen",
-	"general.windowFocus": "Interface Gepauzeerd",
 	"general.useRedChannel": "Gebruik Rood Kanaal",
 	"general.useRedChannelTooltip": "Gebruikt alleen het rode kanaal",
 	"general.xResolution": "X Resolutie",
@@ -152,5 +151,9 @@
 	"general.theme.system": "System",
 	"general.theme.light": "Light",
 	"general.theme.dark": "Dark",
-	"general.useOSCQuery": "Use OSCQuery"
+	"general.useOSCQuery": "Use OSCQuery",
+	"general.windowFocused": "Window Focused",
+	"general.disableCameraPreview": "Disable camera preview (everywhere)",
+	"general.oscDelayEnable": "Enable OSC delay",
+	"general.oscDelaySeconds": "OSC delay in seconds"
 }