Increase EON-view

[lxsxl]

Could we please increase the count of EON screens? So we do not only display one single EON screen with only the MF that correspond to the tuned frequency but as many EON screens in a cycle (by pressing MODE button) as there are transmitted head frequencies.

[andimik]

I don't agree. Please keep it as it is.

[lxsxl]

Solution could be a setting "EON-MF only for tuned frequency" or "EON-MF for all network frequencies".

[lxsxl]

And another idea: actually we use the MODE button for switching between AF and EON view. We could instead use the rotary encoder as it is not used in those screens. So you can decide on your own if you only select AF ande the first EON view or if you scroll through all EON screens.

[PE5PVB]

Well, for this kind of information it's better to use RDSSpy. We are currently running to the limit of the flash size and SRAM, so this option won't fit.

[lxsxl]

Okay, different approach: We keep the one (or two) EON screens. But we could replace the fixed three MF positions by a scrolling line that show the complete EON sets. As there may be transmitted up to four MFs assigned to one head frequency (HF), those should be kept together (HF first and then the MFs in the same order they are transmitted (GT 14A variant type 0101 up to 1000)), then the next HF with it MF/MFs and so on.

The HF/MF sets should be ordered by the HF; HF displayed in red color, the MFs in yellow color, one exeption: if the head frequency is the same as the actually tuned frequency then this HF shall be displayed in green so it is easy to get the MFs for the actually tuned frequency. It could also be a solution to place the HF/MF set of the actually tuned frequency at the head of the line.

I suppose that you process those data anyway but display only a small part of it, so I hope this could be a memory-saving solution?