NUC980DK61YC Hardware Desing

[RSAlperen]

Hi;
I'm develop a custom linux board. I use to NUC980DK61YC MPU. This board booting to eMMC1/SD1. But MPU freeze to calculation sd card size. SD card is 8gb. I use the same sd card in the nuc980 serial server board, but it does not cause any problems there.

Serial Console Output;

NUC980 IBR 20180813
Boot from NAND
T24
No image in NAND, USB boot

NUC980 IBR 20180813
Boot from SD

NUC980 IBR 20180813
Boot from USB
DDR-OK
=======================================
Run firmware code
CPU: 300MHz, DDR: 300MHz, SYS: 300MHz, PCLK: 150MHz
Parse NuWriter command line
=======================================
SPI NOR ID=0x0000ef17 _spi_type =0
SPI NOR ID=0x0000ef17 _spi_type =0, Auto Detect

SPI NAND: Error MXIC spiNAND_ReadyBusy_Check timeout
SPI NAND ID 0x401800 not support!!
Error MXIC spiNAND_ReadyBusy_Check timeout

NAND ID=[2c][da][90][95]
PowerOn setting 0x7f6002d4
Auto Detect:
BlockPerFlash= 2047, PagePerBlock= 64
PageSize= 2048, ECC= T8, ExtraDataSize= 64, SectorPerBlock= 256

BlockPerFlash=2047, PagePerBlock=64, PageSize=2048

eMMC1/SD1

SD Card Schematic;