Update README.md

Author: openastrotech

README.md

@@ -19,7 +19,7 @@ All parts needed once, except:
  - part 15, twice
 
 
-The different versions for latitudes work in a +/- 5° degree range. Currently no support for southern hemisphere or latitudes outside 55-15° N.
+The different versions for latitudes work in a +/- 5° degree range. For the southern hemisphere check the first tab of the arduino code and flip the wiring for the RA stepper. Polar alignment will be much harder.
 Also check out the first add-on, the [OpenAstroGuider](https://github.com/OpenAstroTech/OpenAstroGuider)
 
 I strongly suggest starting with part 14, the lens ring. If you cant make it fit, you will not be able to use the mount at this point. 
@@ -51,4 +51,4 @@ Take a look at an [example for my lens](https://imgur.com/Ql9mAmH).
 
 All High values have to add up to 30mm.
 If your lens is flat, put its diameter into Diam1 & Diam2 and put High1 to 30. Leave the rest at 0.
-I recommend adding 0,5mm or more to the diameters as tolerance and definitely put some isolation tape (or similar) into the coupler to not scratch your lens. Also, **dont screw this too tight!** It will hold fine with loosely tightened screws.
+I recommend adding 0,5mm or more to the diameters as tolerance and definitely put some isolation tape (or similar) into the coupler to not scratch your lens. Also, **dont screw this too tight!** It will hold fine with loosely tightened screws.