Missed Readings for 240 minutes

[jj314]

Device: Dexcom G7
Phone: Google Pixel 8a
Android Version: 16
Problem: I don't get readings anymore.
What I tried: First it said "Missed Readings for 240 minutes." Then I restarted my phone. "Now it says G7 State isn't currently known. Next connection will update this." Then I tried to forget all bluetooth devices, change hardware data resource to "Disable collection", change back to "G6/G7/1/1+" Transmitter.
system status:

dexcom status:

battery settings:

dex debug settings:

[Navid200]

There are possibly several issues. I am going to ask you to fix one at a time. Don't expect everything to work as soon as you have completed the first.

First, you should never use xDrip older than the current stable release. So, update xDrip.

You have shown Bluetooth Legacy battery optimization settings.
Can you show the same for xDrip?

[Navid200]

Swipe right to go to the status page titled Classic and tap on restart collector.

[Navid200]

Where are your previous G7 devices? You cannot have them nearby. They all need to be moved far away at least 10m away.

[jj314]

my previous devices was one was room over. I moved now all previous devices to the opposite side of the apartment more then 10m away. I pressed restart collector. Status is similar to previous screenshot.

[Navid200]

Use a scanner to find the transmitter: https://navid200.github.io/xDrip/docs/Bluetooth-Scanner.html

Pay attention to when it becomes bold. That is when it is transmitting. it last about 15 seconds. The rest of the time during the entire 5-minute period, it will not be bold.
If the device is in rapid reconnect mode, it will go bold once a minute.
If it only goes bold once every 5 minutes, it means that it is not in rapid reconnect mode.
That means you did not wait 15 minutes when you disabled collection. Do it again and make sure you wait until the scanner shows the transmitter go bold once a minute.

If it is already going bold once a minute, change the last character of the pairing code to something else and apply. Then, change it back to the correct value and apply. Now, go back to the Dex status page. You should get a pair request.

[jj314]

Okay, it went bold once per minute. I changed the pairing code and changed it back and received a pairing request. Everything back to normal now. Thank you <3

[Navid200]

I'm glad it is working.

I am surprised that battery optimization was already set to unrestricted.
I would check all the settings if I were you:
https://navid200.github.io/xDrip/docs/G6-Recommended-Settings.html