Needs an active cooling on the board! #17
Description
If you are having weird issues, check the running temperature!
It took me two weeks to find out the under/no extrusion issue with the Nitehawk SB toolhead with Stealthburner/Galileo2.
It turned out the board was running at a high temperature, around 78C.
Once it hits 80C, it will cut the power off the extruder or hotend heat core.
With the fan on, now Nitehawk runs at around 57C. No problem whatsoever.
So, LDO, please update your BOM list for the installation.
It would be better to add a 3010 fan with the kit.
regards,