Bring GcodeCNCDemo2Axis.ino to work and scaling #21
Description
Hello,
I am trying to use your program GcodeCNCDemo2Axis.ino for a stepper motor drive of a DVD sled. Thank you very much for the informative web page and the programs.
In order to make the program work I needed to make a modification:
line 185 must read: ptr=strchr(ptr,' ')+1;
A compiler warning can be avoided, when you write in line 181
while((int)ptr>1 && *ptr && ptr<buffer+sofar) { // cast to int
One question about scaling. The stepper motor in use needs 20 steps for one turn,
and moves the head on the spindel 3 mm (from datasheet).
When in config.h I adopt: #define STEPS_PER_TURN (20)
I get with the command: G01 F10 X30; (30 mm?) a movement of about 5 mm.
When I try to scale with the parameter STEPS_PER_TURN (xx) it behaves strange.
How can I scale Xmm to the actual movement?
Another question is MICROSTEP. The actual movement with module AMS1
(adafruit motor control V1 with 74HCT595) sounds like SINGLE stepping.
I have used from adafruit the program "steppertest.pde" which goes endless forth
and back 100 steps in different step modes.
Regards, Rudolf
p.s. I wrote an issue, because the "Reply" function on the web page
https://www.marginallyclever.com/2013/08/how-to-build-an-2-axis-arduino-cnc-gcode-interpreter/
does not work. The "Post Comment" button overlaps the captcha field.