Add v23.110 version

[lein1013]

I tried v23.040 (highest version supported by the integration)

and it seems it works fine for V 23.110 - so it would be great if this version could be added to the version dropdown

[lein1013]

OK, hold on - seems there are some addresses swapped

Biomass boiler cleaning -> should be mapped on the Biomass boiler ash container

Biomass boiler ash container -> should be mapped to Biomass boiler outdoor temperature

Biomass boiler outdoor temperature -> should be mapped to -> no idea

What a mess ...

[LavermanJJ]

😲 - did you check the modbus spec if there are such changes indicated?

[lein1013]

Unfortunately I don't have the latest modbus spec. Frankly speaking I have not seen any forum entry etc with someone else who has 23.110 - maybe this release is not the best.
But, I've reached out to Solarfocus to get the latest SW - let's see...

[LavermanJJ]

Did solarfocus the firmware update to you without a technician coming to you?

Btw I also run 23.110 but have a Vampair - for me it's running stable since ~1 year.

[lein1013]

No, 23.110 was done by a technician, but before that I got a version which I flashed from the USB Stick.
But if you have 23.110 - why didn't you add it to the supported APIs?

Btw I've updated now my pysolarfocus fork and did some quick and dirty modifications and installed the modified pysolarfocus it directly via the Terminal
with

 ~ docker exec -it homeassistant bash
pip install git+https://github.com/lein1013/pysolarfocus.git@ecotop23110

in the manifest.json of the solarfocus custom integration I removed "requirement" field to avoid that the official version is installed again at restart.
Then restart HA
With this setup it looks good again. Somehow I think that in this version maybe the registerchanges happended by accident. So testing a new version would be interesting.

And that Vampair is working with 23.110 is understandable, since the "shifted" registers are only related to biomass_boiler

PS: the 60.7°C value I see at

        self.octoplus_buffer_temperature_bottom = DataValue(address=10, multiplier=0.1)

is from X32 ... Rücklauffühler

[LavermanJJ]

Thanks for the PR.

Seems I only updated the "compatible version" at the pysolarfocus lib