Singled Motion Sensor

[giraldojc]

Hello all,
I need help adding an unsupported device.
Singled developed a new zigbee motion sensor which works really well in HA but would be nice to have Z2M support.

Here is the external definition:

const m = require('zigbee-herdsman-converters/lib/modernExtend');

const definition = {
zigbeeModel: ['E1M-G7H'],
model: 'E1M-G7H',
vendor: 'sengled',
description: 'Automatically generated definition',
extend: [m.battery(), m.iasZoneAlarm({"zoneType":"generic","zoneAttributes":["alarm_1","alarm_2","tamper","battery_low"]})],
meta: {},
};

module.exports = definition;

[Koenkk]

Could you make a PR by clicking here?

Can you also check if works without "alarm_2",

[giraldojc]

I have never done a PR so I don’t know how to begin. Also, no idea what alarm_2 is supposed to do. I enabled it, walked by the sensor a few times but it didn’t do anything nor it report anything related to alarm_2. Only that it is off.

…

On May 19, 2025, at 14:40, Koen Kanters ***@***.***> wrote: Could you make a PR by clicking here <https://github.com/Koenkk/zigbee-herdsman-converters/edit/master/src/devices/sengled.ts>? Can you also check if works without "alarm_2", — Reply to this email directly, view it on GitHub <#27446 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVLOGR6XSUT52H6E6N327IXTNAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMJZHAYDCNQ>. You are receiving this because you authored the thread.

[Koenkk]

No problem, added it!

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.

Could you also submit a picture for the docs? This can be done by:

1. Create a fork by clicking here
2. Go to the public/images/devices directory, Add file -> Upload files
3. Upload the files and press Commit changes
4. Press Contribute -> Open pull request -> update title/description -> Create pull request

Make sure that:

• The filename is E1M-G7H.png
• The size is 512x512
• The background is transparent (use e.g. Adobe remove background)

[giraldojc]

Thank you for your assistance on this. Just uploaded the file but did it before reading the name requirement. How can I delete what I uploaded? Or could you do it? See attached.

…

On May 22, 2025, at 13:24, Koen Kanters ***@***.***> wrote: No problem, added it! Changes will be available in the dev branch <https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html> in a few hours from now and in the next release which is every 1st of the month. Could you also submit a picture for the docs? This can be done by: Create a fork by clicking here <https://github.com/Koenkk/zigbee2mqtt.io/fork> Go to the public/images/devices directory, Add file -> Upload files Upload the files and press Commit changes Press Contribute -> Open pull request -> update title/description -> Create pull request Make sure that: The filename is E1M-G7H.png The size is 512x512 The background is transparent (use e.g. Adobe remove background <https://new.express.adobe.com/tools/remove-background>) — Reply to this email directly, view it on GitHub <#27446 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVI4CHLMRULXSK7JILL27YI4RAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMRTG44TOOA>. You are receiving this because you authored the thread.

[Koenkk]

could you provide a link to the change you did?

[giraldojc]

Sorry for my delay. Was out of country. So I’m guessing you’re asking about this: https://github.com/giraldojc/zigbee2mqtt.io

…

On May 22, 2025, at 13:24, Koen Kanters ***@***.***> wrote: No problem, added it! Changes will be available in the dev branch <https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html> in a few hours from now and in the next release which is every 1st of the month. Could you also submit a picture for the docs? This can be done by: Create a fork by clicking here <https://github.com/Koenkk/zigbee2mqtt.io/fork> Go to the public/images/devices directory, Add file -> Upload files Upload the files and press Commit changes Press Contribute -> Open pull request -> update title/description -> Create pull request Make sure that: The filename is E1M-G7H.png The size is 512x512 The background is transparent (use e.g. Adobe remove background <https://new.express.adobe.com/tools/remove-background>) — Reply to this email directly, view it on GitHub <#27446 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVI4CHLMRULXSK7JILL27YI4RAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMRTG44TOOA>. You are receiving this because you authored the thread.

[giraldojc]

I’ve tried searching for the link but can't find it. I’ll try uploading it again.

…

On May 25, 2025, at 14:10, Koen Kanters ***@***.***> wrote: could you provide a link to the change you did? — Reply to this email directly, view it on GitHub <#27446 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVLVUUN4PZL6NKLI6SL3AIIRHAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMRWGU2DOMI>. You are receiving this because you authored the thread.

[giraldojc]

Found this: https://github.com/Koenkk/zigbee2mqtt.io/blob/master/public/images/devices/E1M-G7H.png I guess that’s what you did? Now how do I update my devices?

…

On Jun 7, 2025, at 15:42, Julio Giraldo ***@***.***> wrote: I’ve tried searching for the link but can't find it. I’ll try uploading it again. > On May 25, 2025, at 14:10, Koen Kanters ***@***.***> wrote: > > > could you provide a link to the change you did? > > — > Reply to this email directly, view it on GitHub <#27446 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVLVUUN4PZL6NKLI6SL3AIIRHAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMRWGU2DOMI>. > You are receiving this because you authored the thread. >

[giraldojc]

Hello again, just following up. Thank you.

…

On Jun 7, 2025, at 15:45, Julio Giraldo ***@***.***> wrote: Found this: https://github.com/Koenkk/zigbee2mqtt.io/blob/master/public/images/devices/E1M-G7H.png I guess that’s what you did? Now how do I update my devices? > On Jun 7, 2025, at 15:42, Julio Giraldo ***@***.***> wrote: > > I’ve tried searching for the link but can't find it. > I’ll try uploading it again. > >> On May 25, 2025, at 14:10, Koen Kanters ***@***.***> wrote: >> >> >> could you provide a link to the change you did? >> >> — >> Reply to this email directly, view it on GitHub <#27446 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVLVUUN4PZL6NKLI6SL3AIIRHAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMRWGU2DOMI>. >> You are receiving this because you authored the thread. >> >

[giraldojc]

Hello, Following up again. Just need to know how to update my Singled devices within my zigbee2mqtt. The picture updated but they still show as “unsupported”. Thank you.

…

On Jun 10, 2025, at 17:55, Julio Giraldo ***@***.***> wrote: Hello again, just following up. Thank you. > On Jun 7, 2025, at 15:45, Julio Giraldo ***@***.***> wrote: > > Found this: https://github.com/Koenkk/zigbee2mqtt.io/blob/master/public/images/devices/E1M-G7H.png > > I guess that’s what you did? > Now how do I update my devices? > >> On Jun 7, 2025, at 15:42, Julio Giraldo ***@***.***> wrote: >> >> I’ve tried searching for the link but can't find it. >> I’ll try uploading it again. >> >>> On May 25, 2025, at 14:10, Koen Kanters ***@***.***> wrote: >>> >>> >>> could you provide a link to the change you did? >>> >>> — >>> Reply to this email directly, view it on GitHub <#27446 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ANDUGVLVUUN4PZL6NKLI6SL3AIIRHAVCNFSM6AAAAAB5NTA2P2VHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTGMRWGU2DOMI>. >>> You are receiving this because you authored the thread. >>> >> >