Zigbee battery EndDevice as Router

[Franko1278]

Hello,

I have 4 smoke detectors model HS1SA-M im my home automation system ioBoker running with the ZigBee protocol. Two of them are recognized as End Devices and running fine. The other 2 are recognized as Router Zigbee devices and are always online. The Battery only last one week.

I ordered them in the same batch, so I am wondering that they are working in different modes.

Is there a parameter which can be changed in the configuration of the 2 devices in router mode?

Thank you for your help!!

Regards, Frank

[Franko1278]

Hello, I need to address this topic again.

I'm currently porting my Zigbee devices from the direct ioBroker implementation to the standalone Zigbee2MQTT solution. Yesterday, I unpaired two identical smoke detectors from ioBroker and then re-paired them in the standalone Zigbee2MQTT solution. In the standalone Zigbee2MQTT installation, they are connected as routers; in the ioBroker implementation, they were EndDevices.

Does anyone have any idea how I can change this back to "End Device"? As mentioned, the battery only lasts a week in the router configuration.

Thank you for your help!

Best regards, Frank