Support non Jumbo Frame firmware of D555

[seliber]

[D555 under Windows 11]
I'm testing the new camera of D555. With MTU = 9000 config, I can view both RGB and Depth images.

And I tried to change the MTU setting of camera itself with rs-dds-config.exe, found that D555 can only support MTU 9000. My question is: Is there any plan of support default MTU network? In my use case, I cannot modify the whole network chain with high MTU.

[MartyG-RealSense]

Hi @seliber In your earlier case at #14293 my colleague advised at #14293 (comment) that on Windows the MTU for the jumbo packet can be configured to 9014 in the Windows network settings. So it should not be necessary to modify the camera's firmware default.

As far as I am aware there are no plans to stop using jumbo frames.

[seliber]

Hi @seliber In your earlier case at #14293 my colleague advised at #14293 (comment) that on Windows the MTU for the jumbo packet can be configured to 9014 in the Windows network settings. So it should not be necessary to modify the camera's firmware default.

As far as I am aware there are no plans to stop using jumbo frames.

After changing a new camera, and with the configuration, the camera works well. But in many industry system, it is not possible to change all switches/clients to MTU as 9000, that's why I'm asking whether there is any plan to not use jumbo frames.

It is very critical to me to make the decision whether to introduce it into our next product.

[MartyG-RealSense]

I will ask my RealSense colleagues about it in the coming week and let you know what they say.