Soldering
- To work on the soldering work stations you need to have completed the SAFETY BRIEFING of the prototyping lab.
- Get yourself a soldering kit from the Prototyping Labs Staff.
| Name | Description | |
|---|---|---|
| 1 | Solder | |
| 2 | Cutter Knife | |
| 3 | Wire Stripper | |
| 4 | Side Cutter | |
| 5 | Voltmeter | |
| 6 | Cables | |
| 7 | Solder Remover | Removal of solder connections: Desoldering tin is used to remove solder connections between electronic components without damaging them |
| 8 | Flux | Improvement of wetting: Fluxes promotes wetting of the solder at the surface of the solder joint. In this way, an even distribution of the solder can be ensured. |
| 9 | Crimpling Pliers | The crimpling tool is used to connect wires together |
| 10 | Breadboard | Plug-in board to fix electronic components |
| 11 | Desoldering Pump | Extracting liquified solder when loosening a solder joint. |
Overview
| Name | Description | |
|---|---|---|
| #1 | Fume Extraction | / |
| #2 | Soldering Station | / |
| #2.1 | Solder Tips | Here you can change your soldering tip. There are Tips with different scopes. Which one you need depends on how big your soldering point is. |
| #2.2 | Tip Cleaner | When the soldering tip is inserted, it is cleaned and excess solder is removed. |
| #2.3 | Sponge | During the soldering process, excess solder can be removed using the sponge. |
| #2.4 | Terminal | Here you can specify your soldering settings. For instance setting up the temperature of the soldering iron. |
| #3 | Solder Vise | / |
If you have never soldered in your life before, check out the complete beginners guide.
This tutorial covers the essentials of soldering.
| STEP 1 | STEP 2 | STEP 3 |
|---|---|---|
 |
 |
 |
| Start the fume extraction I = Fan Only II = Fan & Light |
Place your workpiece next to the fume extraction | Start the soldering station |
| STEP 4 | STEP 5 | STEP 6 |
 |
 |
 |
| Wet the soldering-sponge | Set up the soldering temperature | Take out the soldering rod ATTENTION: As soon as you take out the rod it starts heating up! |
| STEP 7 | STEP 8 | STEP 9 |
 |
 |
 |
| Choose the right soldering-tip | You can now start soldering | Always switch off the power after operation! |