K1 CFS Support

[michaelortnerit]

Hello! Tirst, thanks for this cool script. It helps a lot :)

Are you planning to add support for the creality k1 cfs upgrade? Would be very nice. Have pre-orderd one :)

Thanks!

[fenix8k]

I hope some one make the helper script compatible with the K1 and CFS, the unit arrives to my house today, I can provide the firmware or wathever necesary to make it compatible 👯

[fenix8k]

I have made a guide on how to install the helper script on the last .33 firmware

#797

[Digitalashley]

Anyone have issues with helper script and k1 max on CFS .27 and .33 firmware once installed? i get endless error codes the only say to restart printer xs2060 etc and unable to home vie fluidd of via creality web interface also. macros wont work just cause error codes aswell. .33 seems worse, with being unable to retract or extrude filaments as well once helperscript is installed.

this is an example from fluidd console when attempting homing. homing all or any axis is the same/similar result.,

13:15:30
$ SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=50
13:15:41
$ G28 X
13:15:41
// x_axes is NULL
13:15:41
// move xy
13:15:41
// Klipper state: Shutdown
13:15:41
!! {"code":"key60", "msg":"Internal error on command:G28", "values": ["G28"]}
13:15:41
!! {"code":"key60", "msg":"Internal error on command:_HOME_X", "values": ["_HOME_X"]}
13:15:41
// {"code": "key94", "msg":"MCU 'rpi' shutdown: Command request
// This generally occurs in response to an M112 G-Code command
// or in response to an internal error in the host software.", "values": []}
13:15:41
// {"code": "key94", "msg":"MCU 'rpi' shutdown: Command request
// This generally occurs in response to an M112 G-Code command
// or in response to an internal error in the host software.", "values": []}
13:15:41
!! {"code":"key60", "msg":"Internal error on command:G28", "values": ["G28"]}
13:15:41
!! {"code": "key94", "msg":"MCU 'rpi' shutdown: Command request
13:15:41
// {"code": "key94", "msg":"MCU 'leveling_mcu' shutdown: Command request
// This generally occurs in response to an M112 G-Code command
// or in response to an internal error in the host software.", "values": []}
13:15:41
!! {"code": "key94", "msg":"MCU 'leveling_mcu' shutdown: Command request
13:15:41
// {"code": "key94", "msg":"MCU 'mcu' shutdown: Command request
// This generally occurs in response to an M112 G-Code command
// or in response to an internal error in the host software.", "values": []}
13:15:41
!! {"code": "key94", "msg":"MCU 'mcu' shutdown: Command request
13:15:41
// {"code": "key94", "msg":"MCU 'nozzle_mcu' shutdown: Command request
// This generally occurs in response to an M112 G-Code command
// or in response to an internal error in the host software.", "values": []}
13:15:41
!! {"code": "key94", "msg":"MCU 'nozzle_mcu' shutdown: Command request
13:15:46
!! {"code": "key294", "msg": "Timeout on wait for oid:3 name:'tmcuart_response' response", "values":[]}
13:15:51
!! {"code": "key294", "msg": "Timeout on wait for oid:3 name:'tmcuart_response' response", "values":[]}

on the printer itself after attempting to home i get;

XS2060 error code until i reboot.

let me know what info i should maybe provide.

[Digitalashley]

seems like the cfs firmware and the helper script dont play nice anymore. no doubt due to how creality have created things.