M106 Error Ender 3v3

[bhast2]

I am getting this error on M106 macro

!! {"code":"key165", "msg": "Error evaluating 'gcode_macro M106:gcode': jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'S'

[Guilouz]

There is no change in M106 macro for Ender-3 V3 in my script.

[evolventum]

there is problem with gcode_macro.cfg - after changing the variable_fan0_min from 140 to 0 system will be correctly calculate M106 macro with real range from 0 to 255, and when variable was 140 the commands in terminal SET_PIN PIN=fan0 VALUE=100 and SET_PIN PIN=fan0 VALUE=100 did gave different RPM on fan, so the g-code also did gave incorrect fan speed when printing