Le Chat Mauve Styled PCB

[n67t1cq]

I'm designing a PCB in the style of Le Chat Mauve.
It has type C for firmware upload via USB type C, micro HDMI for output on the right side. I've also designed a 3D case (progress), so I need to make a sample.

[n67t1cq]

[n67t1cq]

Board has MP1584 buck converter.
I'm also building 3d printed housing for this a2cdvi

[FarLeftLane]

Very cool, great progress. Sorry for the delay, I’ve been on holiday. Just getting back to do some work. I’ll hopefully find this issue with DHGR (which is very strange) and then post the code. Probably in the next week or two.

Regarding your board, does it block the NTSC RCA jack? Also, you used a through hole DB15. Are there any surface mount versions?

[FarLeftLane]

I posted a 1.7.3 version, hopefully fixed the DHGR issue.

[n67t1cq]

I've designed it to connect micro-HDMI without blocking the RCA socket, but I'll measure it exactly when the actual PCB arrives. It should arrive next week.

For the DB15 connector I used a DS1034-15M.

[FarLeftLane]

FYI. I posted current code. https://github.com/FarLeftLane/A2C_DVI_Firmware/tree/master/firmware/a2c