What is the general distance of your interference?

[axian2020]

What is the general distance of your interference? My interference distance seems to be very short, and I have to get very close to it to work, is there something wrong?

[osamaaj03]

Mine is doing the same too. I even tried other antennas in case the ones I'm using wasn't working but the issue still persist.

edit: here's the serial output if it's any help

ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1344
load:0x40078000,len:13964
load:0x40080400,len:3600
entry 0x400805f0
####################################################################################################################################

███████ ███████ ██████  ██████  ██████        ██████  ██      ██    ██ ███████      ██  █████  ███    ███ ███    ███ ███████ ██████ 
██      ██      ██   ██      ██      ██       ██   ██ ██      ██    ██ ██           ██ ██   ██ ████  ████ ████  ████ ██      ██   ██
█████   ███████ ██████   █████   █████  █████ ██████  ██      ██    ██ █████        ██ ███████ ██ ████ ██ ██ ████ ██ █████   ██████ 
██           ██ ██           ██ ██            ██   ██ ██      ██    ██ ██      ██   ██ ██   ██ ██  ██  ██ ██  ██  ██ ██      ██   ██
███████ ███████ ██      ██████  ███████       ██████  ███████  ██████  ███████  █████  ██   ██ ██      ██ ██      ██ ███████ ██   ██

####################################################################################################################################

                                          Firmware : Combo-Channel-Select (BT-BLE-WiFi-RC)                                          

                        ██████╗ ██╗   ██╗    ███████╗███╗   ███╗███████╗███╗   ██╗███████╗████████╗ █████╗                          
                        ██╔══██╗╚██╗ ██╔╝    ██╔════╝████╗ ████║██╔════╝████╗  ██║██╔════╝╚══██╔══╝██╔══██╗                         
                        ██████╔╝ ╚████╔╝     █████╗  ██╔████╔██║█████╗  ██╔██╗ ██║███████╗   ██║   ███████║                         
                        ██╔══██╗  ╚██╔╝      ██╔══╝  ██║╚██╔╝██║██╔══╝  ██║╚██╗██║╚════██║   ██║   ██╔══██║                         
                        ██████╔╝   ██║       ███████╗██║ ╚═╝ ██║███████╗██║ ╚████║███████║   ██║   ██║  ██║                         
                        ╚═════╝    ╚═╝       ╚══════╝╚═╝     ╚═╝╚══════╝╚═╝  ╚═══╝╚══════╝   ╚═╝   ╚═╝  ╚═╝                         

####################################################################################################################################

                                                    !Educational purposes only!                                                     

                                         https://github.com/EmenstaNougat/ESP32-BlueJammer                                          

                                               I'm not responsible for your actions!                                                

####################################################################################################################################

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

╦  ╦╔═╗╔═╗╦       ╔═╗╦ ╦╔═╗╔═╗╔═╗╔═╗╔═╗
╚╗╔╝╚═╗╠═╝║  ───  ╚═╗║ ║║  ║  ║╣ ╚═╗╚═╗
 ╚╝ ╚═╝╩  ╩       ╚═╝╚═╝╚═╝╚═╝╚═╝╚═╝╚═╝

SP (standard power) started !!! VSPI nRF24 module initialized SUCCESSFULLY! ########################################################



SPI Frequency           = 16 Mhz
                                Channel                 = 76 (~ 2476 MHz)
Model                   = nRF24L01+
RF Data Rate            = 2 MBPS
RF Power Amplifier      = PA_MAX
RF Low Noise Amplifier  = Enabled
CRC Length              = Disabled
Address Length          = 5 bytes
Static Payload Length   = 32 bytes
Auto Retry Delay        = 250 microseconds
Auto Retry Attempts     = 0 maximum
Packets lost on
                   current channel      = 0
Retry attempts made for
                           last transmission    = 8
Multicast               = Disabled
Custom ACK Payload      = Disabled
Dynamic Payloads        = Disabled
Auto Acknowledgment     = Disabled
Primary Mode            = TX
TX address              = 0xffffffffff
pipe 0 ( open ) bound   = 0xe7e7e7e7e7
pipe 1 ( open ) bound   = 0xc2c2c2c2c2
pipe 2 (closed) bound   = 0xc3
pipe 3 (closed) bound   = 0xc4
pipe 4 (closed) bound   = 0xc5
pipe 5 (closed) bound   = 0x80

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

╦ ╦╔═╗╔═╗╦       ╔═╗╦ ╦╔═╗╔═╗╔═╗╔═╗╔═╗
╠═╣╚═╗╠═╝║  ───  ╚═╗║ ║║  ║  ║╣ ╚═╗╚═╗
╩ ╩╚═╝╩  ╩       ╚═╝╚═╝╚═╝╚═╝╚═╝╚═╝╚═╝

HP (high power) started !!! HSPI nRF24 module initialized SUCCESSFULLY! ############################################################



SPI Frequency           = 16 Mhz
                                Channel                 = 76 (~ 2476 MHz)
Model                   = nRF24L01+
RF Data Rate            = 2 MBPS
RF Power Amplifier      = PA_MAX
RF Low Noise Amplifier  = Enabled
CRC Length              = Disabled
Address Length          = 5 bytes
Static Payload Length   = 32 bytes
Auto Retry Delay        = 250 microseconds
Auto Retry Attempts     = 0 maximum
Packets lost on
                   current channel      = 0
Retry attempts made for
                           last transmission    = 0
Multicast               = Disabled
Custom ACK Payload      = Disabled
Dynamic Payloads        = Disabled
Auto Acknowledgment     = Disabled
Primary Mode            = TX
TX address              = 0xffffffffff
pipe 0 ( open ) bound   = 0xe7e7e7e7e7
pipe 1 ( open ) bound   = 0xc2c2c2c2c2
pipe 2 (closed) bound   = 0xc3
pipe 3 (closed) bound   = 0xc4
pipe 4 (closed) bound   = 0xc5
pipe 5 (closed) bound   = 0xc6