Add support for the strimer cables please?

[F5544]

Loving your software. really better than the l-connect.

can you add support for the lianli strimer cables?

[F5544]

Device USB\VID_0CF2&PID_A200&MI_00\9&302e814f&0&0000 was configured.

Driver Name: winusb.inf
Driver Package ID: winusb.inf_amd64_e3d2ed0c43a36b9a
Class GUID: {88bae032-5a81-49f0-bc3d-a4ff138216d6}
Driver Date: 06/21/2006
Driver Version: 10.0.26100.1150
Driver Provider: Microsoft
Driver Section: WINUSB.NT
Driver Rank: 0xFF2000
Matching Device ID: USB\MS_COMP_WINUSB
Outranked Drivers:
Device Updated: false
Parent Device: USB\VID_0CF2&PID_A200\6243168001

[F5544]

I got it till these lines:

const VENDOR_IDS: [u16; 1] = [ 0x0cf2 ];
const PRODUCT_IDS: [u16; 8] = [ 0x7750, 0xa100, 0xa101, 0xa102, 0xa103, 0xa104, 0xa105, 0xa200 ];

        // Send Command to Sync to RGB Header
        let sync_byte: u8 = if sync_rgb { 1 } else { 0 };
        let _ = match &hiddevice.product_id() {
            0xa100|0x7750 => hid.write(&[224, 16, 48, sync_byte, 0, 0, 0]), // SL
            0xa101 => hid.write(&[224, 16, 65, sync_byte, 0, 0, 0]), // AL
            0xa102 => hid.write(&[224, 16, 97, sync_byte, 0, 0, 0]), // SLI
       ---> 0xa200 => hid.write(&[224, 0, 0, sync_byte, 0, 0, 0]), //STRIMER
            0xa103|0xa105 => hid.write(&[224, 16, 97, sync_byte, 0, 0, 0]), // SLv2
            0xa104 => hid.write(&[224, 16, 97, sync_byte, 0, 0, 0]), // ALv2
            _ => hid.write(&[224, 16, 48, sync_byte, 0, 0, 0]), // SL
        };

        // Avoid Race Condition
        thread::sleep(time::Duration::from_millis(200));


        for x in 0..channels.len() {
            
            // Disable Sync to fan header
            let mut channel_byte = 0x10 << x;

            if channels[x].mode == "PWM" {
                channel_byte = channel_byte | 0x1 << x;
            }

            let _ = match &hiddevice.product_id() {
                0xa100|0x7750 => hid.write(&[224, 16, 49, channel_byte]), // SL
                0xa101 => hid.write(&[224, 16, 66, channel_byte]), // AL
                0xa102 => hid.write(&[224, 16, 98, channel_byte]), // SLI
--->           0xa200 => hid.write(&[224, 0, 0, channel_byte]), //STRIMER**
                0xa103|0xa105 => hid.write(&[224, 16, 98, channel_byte]), // SLv2
                0xa104 => hid.write(&[224, 16, 98, channel_byte]), // ALv2
                _ => hid.write(&[224, 16, 49, channel_byte]), // SL
            };

but the bold lines i dont get.
how can i find the right bytes to let it assign in icue?

[F5544]

@expipiplus1 @EightB1ts @bcarvalho2500

can you help me fix the latest code to make it work?

[bcarvalho2500]

@F5544 This is actually where I get lost too. Not sure how @EightB1ts got those values to write. I've tried looking up tech docs on the fans to see if I could figure it out, but couldn't find anything. I'm assuming they somehow saw how L-Connect was writing data, but not sure how.

[F5544]

@bcarvalho2500 ahh yeah. Thank you for your respons. I got some documentation of openrgb on github. But i dont know which values.
https://github.com/CalcProgrammer1/OpenRGB/tree/master/Controllers/LianLiController/LianLiStrimerLConnectController

[EightB1ts]

I have some time to improve these repos in the next few weeks. It makes it difficult not having the controllers on hand to see what is being sent over the wire over Wireshark. I also do not use these fans anymore, so testing is impossible on my end.

@bcarvalho2500 I took L-Connect, which is a ElectronJS app, dumped the JS payload containing the controller values, and went digging for it in the minified code.

[F5544]

If I can help you for the js payload. I am willing to help. Can you give me a program how to make a dump for you?

[F5544]

Btw thank you very much for this. I really appreciate your work. If it works i will buy you a coffee for sure. This will me be my main utility.
And for the customers i build pc for