Some problem

[m5it]

pwmWrite.cpp:211:7: error: 'ledc_channel_config_t' has no non-static data member named 'flags'

any idea what to do?

[Dlloydev]

Try the latest versions:
Arduino ESP32 Version 2.0.5
ESP32-ESP32S2-AnalogWrite 3.0.4

[m5it]

thanks for answer. will test. noticing you. thanks! didnt test yet but think this will work. probably because of update of ide this thing should be updated too. not sure. anyway will respond soon.*

[m5it]

man.! now is working back. a lot of thank you**** and to all who managed to work back*** love you*** :)

[evup4s]

I noticed, when trying out the pwmWrite as a 'WokWi demo', and then viewing the logged signal file with 'PulseView' software, that this indicates a frequency (on all 3 channels) of 200Hz instead of the 'planned/programmed' 100Hz. Is this an error of me, of PulseView, or just a matter of insufficient setup of frequency divider in the ESP32 setup part?

[Dlloydev]

Thanks for finding this. Looks like this could be a recent WokWi ESP32S2 simulator issue (will let them know).

The example ESP32_S2_pwmWrite.ino tested OK on my hardware:

ESP32-ESP32S2-AnalogWrite 3.0.4
Arduino 1.8.19
ESP32 2.0.5
Board: "ESP32S2 Dev Module"
Analyzer: Saleae Logic Pro 8 using Saleae Logic 1.2.18

[Dlloydev]

They've fixed the issue (tested using their ESP32-S2 simulation board).