unlshd-030

New changes

• SubGHz: Nice ON2E (Nice One) support (by @assasinfil | PR #335)
• SubGHz: Remove 467.75 From freq analyzer since it has too much noise (Frequency is still can be used, just excluded from FA to avoid false detections)
• Archive and FileBrowser: Fixed more navigation issues (by @Willy-JL | PR #334)
• Plugins -> SubGHz Bruteforcer: Fix Linear Delta 3 repeats (now its more stable and we will be sure signal is received correctly)
• Plugins: Updated TOTP (Authenticator) (by akopachov)
• OFW: Fix Cyfral & Metakom emulation (My temp fix removed and proper fix from OFW applied)
• OFW: BadUSB: disable CDC mode, USB mode switch fix
• OFW: Updater visual fixes

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-030(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-030.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-029

New changes

• Archive and FileBrowser: Fixed #332 (large folders parse issue)
• Archive and FileBrowser: Fixed navigation issues and improved performance (by @Willy-JL | PR #333)
• SubGHz -> HAL: Fixed external CC1101 module issues (transmission now works correctly) (fixed issue #331)
• SubGHz: Use 17 (1W) pin for subghz debug mode

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-029(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-029.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-028

New changes

• iButton: Temp Fix of non working emulation on Metakom and Cyfral protocols
• Archive and FileBrowser: Sort files and folders alphabetically. Added a "Internal" tab to the Browser (only in DEBUG mode), other misc changes (by @ClaraCrazy and @Willy-JL | PR #327)
• SubGHz: Custom modulation for lrs pagers and added frequency 467.75 to default list (by @jbohack | PR #328)
• SubGHz: Small fixes in SubGHz HAL

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-028(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-028.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-027

New changes

• API: Due to OFW changes API was updated to 14.x, extra pack was updated you can install it separatly or use build with extra pack included
• SubGHz: Fixed bug in SubGHz HAL, now CC1101 shutdowns properly, (also this fixed unstable TX)
• SubGHz: Alutech AT-4N encoder (support for sending signals) (by @assasinfil | PR #322)
• SubGHz: KingGates Stylo 4k encoder (support for sending signals) (by @assasinfil | PR #321)
• SubGHz: Added Debug Pin setting for protocol development and fixed debug (and sound) with internal module
• SubGHz: GUI Fixes
• SubGHz: Removed bugged Detect RAW feature, now its replaced with BinRAW
• Plugins: SubGHz Bruteforcer - Added support for Linear Delta-3 310MHz
• Plugins: Fix CTRL-SHIFT in mousejacker (by @notmarek | PR #316)
• Infrared: Update universal remote assets (by @amec0e) (PR #318)
• NFC: Add Mifare Classic keys (by @Bon-Jorik (scaff.walker) | PR #324)
• Misc: Playing games now affect Flipper's level
• OFW: Fixed typo in nfc_magic_scene_wrong_card.c
• OFW: SubGhz: fix cc1101_read_fifo func
• OFW: feat: add missing const qualifiers
• OFW: SubGhz: add protocol BinRAW (binarization of data quantized by the minimum correlated duration)
• OFW: Picopass: show elite key used from dictionary
• OFW: Firmware fixes and improvements for flashing via blackmagic
• OFW: fbt: building fap_dist for compact gh build; accessor: fixed for latest ibutton changes
• OFW: Move CSN space to revent overflow
• OFW: SubGhz: add protocol KingGates Stylo4k
• OFW: SubGhz: add protocol Nice One
• OFW: SubGhz: add protocol Alutech at-4n
• OFW: SubGhz: add DOOYA protocol
• OFW: SubGhz: add protocol "Linear Delta-3"
• OFW: SubGhz: Fix Raw write, add short duration filter setting
• OFW: Update Missing SD Card icon from PR 2373
• OFW: SCons: do not include backup files in build
• OFW: Fix minor UI inconsistencies and bugs
• OFW: Allow use of any suitable pin for 1-Wire devices
• OFW: SD over SPI improvements
• OFW: Multitarget support for fbt (includes support for non released yet flipper hardware)
• OFW: Pin Reset
• OFW: nfc: Add mifare classic value block commands
• OFW: battery info temperature shown in C or F based on settings
• OFW: Script that can find programmer and flash firmware via it.
• OFW: SPI Mem Manager C port (You can use flipper as programmer to flash supported chips)

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-027(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-027.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-026

New changes

• SubGHz: External CC1101 support (by @quen0n | PR #307) - How to connect
• SubGHz: Fix GUI receiver bug - When keyboard is locked and popup appears it now shows bottom text correctly
• Plugins: Added movement interval in mouse_jiggler USB & BLE (by @DocKuro | PR #303)
• Plugins: Solitaire and Blackjack now affect Flipper's level (by @teeebor | PR #305)
• Plugins -> Updated ProtoView (by antirez)
• Plugins -> Updated UniTemp (by quen0n)
• Infrared: Update universal remote assets (by @amec0e) (PR #306)
• NFC: Remove invalid keys from mf classic dict (Fixes #304)
• GUI: Custom font set function (by @LTVA1) - Link
• OFW: FreeRTOS: update to 10.5.1
• OFW: NFC: fix creating MF Classic tags from "Add Manually" menu (BCC calulation and ATQA/SAK writing)
• OFW: Print card CID in storage info
• OFW: Add support for GUI-CTRL in bad_usb
• OFW: Furi: getter for current thread stdout write callback
• OFW: LF-RFID: add CRC calculation to paradox protocol
• OFW: WS: add protocol LaCrosse-TX (TFA Dostmann)
• OFW: Assets: correct MicroSD card pinout in service animations
• OFW: Furi: make furi_is_irq_context public
• OFW: debug apps: made runnable as .faps; sdk: resolved additional APIs in use by faps
• OFW: NFC: change from int8_t to uint8_t
• OFW: NFC: add MIFARE MINI support
• OFW: emv: parse track1&2 equivalent data
• OFW: nfc: Fix sector reads when one block is unreadable for MIFARE Classic
• OFW: nfc: Fix crash when using debug PCAP trace
• OFW: ELF-loader: wait for notification to complete on app exit

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-026(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-026.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-025

New changes

• SubGHz: Somfy Keytis Encoder and Somfy Telis fixes (PR #297 | by @assasinfil)
• SubGHz: Change hopping frequency list to have only most used frequencies
• SubGHz: Block usage of hopping with detect raw at same time (its efficiency is almost 0, it looses signals and all that you can capture is a micro part of end of the signal) (Detect raw also will be removed in a future (and replaced with more correct solution))
• Plugins -> Updated ProtoView (by antirez)
• Infrared: Update universal remote assets (by @amec0e) (PR #298)

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-025(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-025.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-024

New changes

• SubGHz: Somfy Telis Encoder (PR #289 | by @assasinfil & @TQMatvey)
• SubGHz: Add 350Mhz to default range
• Plugins -> Solitaire: Fix for solitaire card placement bug (PR #253 | by @teeebor)
• Plugins -> UniTemp (New sensors added), TOTP - Updated to latest commits
• Plugins -> Added Text Viewer (by kowalski7cc & kyhwana)
• Plugins -> Added UART Terminal (by cool4uma)
• Plugins -> Added ProtoView (by antirez)
• Plugins -> WAV Player - Replaced with fixed and improved version by @LTVA1
• Clock: Fix 12AM was displaying as 00 AM (PR #288 | by @Smileycathy1128)
• Infrared: Allow disabling automatic signal decoding (aka Learn RAW) - works only when debug enabled (PR #273 | by @darmiel)
• Infrared: Update universal remote assets (by @amec0e)
• Desktop: New battery display (Bar %) - (PR #278 | by @Fasjeit)
• BadUSB: Adding CZ keyboard layout (PR #255 | by @peoblouk)
• OFW: Various improvements: Toolbox, Updater and Unit Tests.
• OFW: Fix typos in source code
• OFW: Add the sleigh ride animation
• OFW: Documentation: edit texts, markdown linting
• OFW: Change broken BadUSB link to Hak5 duckyscript quick reference webpage
• OFW: Per protocol signal repeat count - Fixes issues with Sony remotes with SIRC protocol (bruteforce also fixed now!)
• OFW: Add the ability to turn pages in infrared
• OFW: BadUSB backspace/delete fix
• OFW: relocate R_ARM_CALL
• OFW: fbt: PVS support
• OFW: fbt: removed DEBUG_TOOLS & FAP_EXAMPLES flags

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-024(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-024.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-023

New changes

• CI/CD: Builds with extra apps pack included, see new option below
• SubGHz: Allow manual creation of Nice Flor S, Nice Smilo
• LF RFID: Allow removing password from T5577 to make it operational (PR #225 | by @TQMatvey & Tobirg (grvpvl))
• Plugins -> Barcode Generator: Save last used barcode, and load on app start
• Plugins -> Barcode Generator: Add EAN-13 support (PR #234 | by @gid9798)
• Plugins -> Arkanoid: Fix bug with unability to continue game after first level
• Plugins -> Morse Code: Fixed crashes, fixed known issues (PR #249 | by @gid9798)
• Plugins -> USB Keyboard & Mouse: Added ESCAPE key (PR #243 | by @huuck)
• Plugins -> USB Keyboard & Mouse: Added Delete key
• Plugins -> SubGHz Bruteforcer: Add holtek HT12X protocol support
• Plugins -> POCSAG Pager: Fix UI bug
• Plugins -> Wifi Marauder: Enable +5volt on plugin start, to allow usage with custom boards
• Plugins: Add 2048 Game (PR #233 | by @eugene-kirzhanov)
• Plugins: Update TOTP, UniTemp, Wifi marauder to latest commits from their repo's
• Infrared: Universal remote assets updates (by @amec0e | PRs #246 #242)
• Readme fixes (PR #247 | by @Kavitate)
• New Year update slideshow (by @Svaarich)
• Show OTP flipper region on debug and about screens
• OFW: Add float_tools to SDK api
• OFW: Gui: change data ownership model in submenu, own text by default
• OFW: Gui: Direct Draw API
• OFW: Mifare dictionary attack performance improvements.
• OFW: SubGhz: CAME 12 bit encoder fix guard time
• OFW: Fix MFC bruteforce progress bar
• OFW: Docs and readme's updates
• OFW: Picopass read bug fixes
• OFW: OpenOCD scripts
• OFW: New MFC Bruteforce animation
• OFW: File browser: Empty folder label
• OFW: SubGhz: add Holtek_ht12x protocol
• OFW: USB/BLE HID Remote icon fix
• OFW: Fix quoted error for macOS bad-usb
• OFW: Modules: locking view model
• OFW: Fix PVS-Studio warnings
• OFW: Fix unit tests
• OFW: WeatherStation: fix incorrect history index increment
• OFW: File format docs: RFID, iButton, BadUSB
• OFW: SubGhz: fix start navigation
• OFW: iButton: fixed notification on successful read
• OFW: Archive browser delete fix
• OFW: Fixes: correct scrolling text
• OFW: SubGhz: fix Hormann HSM
• OFW: Rework BLE key storage
• OFW: Gui: scrollable long file names in FileBrowser and Archive Browser
• OFW: Untangle NFC_APP_FOLDER from nfc_device
• OFW: WS: add choice fahrenheit/celsius (can be set from flipper settings -> system)

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-023(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-023.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

unlshd-022

New changes

• Fixed sound issues with WAV Player, Metronome, Morse code, DTMF Dolphin
• API: Version was changed due to breaking changes - from 10.x to 11.x - Extra pack was updated, download it by using link below (- Download latest extra apps pack)
• Plugins: Add (UniTemp) Temp sensor reader (PR #216 | by @quen0n) (plugin repo) and Remove DHT Monitor and AM2320 plugins (unitemp has support for that sensors)
• Plugins -> SubGHz Bruteforcer: Add support for PT2260, SMC5326, UNILARM, Honeywell(file only) protocols
• Plugins: Add mouse jiggler to USB Keyboard&Mouse App
• Clock: Use system locale settings
• Infrared: Update universal remote assets (by @amec0e) + (PR #215 | by @airs0urce)
• SubGHz: Removing duplicate code in subghz FAAC scenes. (PR #208 | by @gid9798)
• Plugins -> Weather Station: Fix display of temps lower than -9
• Misc fixes
• OFW: Notification: fix recursive speaker acquire
• OFW: Locale settings
• OFW: Audio support for SubGhz (Breaking API change)
• OFW: Dolphin: add new animation (Happy holidays)
• OFW: SubGhz: add SMC5326, UNILARM protocol
• OFW: Added support for IDTECK cards
• OFW: WS: fix protocol and add new (Oregon_v1, TX8300)
• OFW: VSCode: add task 'Serial console' and group task with sequence calling
• OFW: Dictionary stuff: iClass keys

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n in - flipper-z-f7-update-unlshd-022n.tgz ? - that means this build comes without our custom animations, only official flipper animations

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-022.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

unlshd-021

New changes

DO not install, has multiple bugs with sound, all fixed in 022 release

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• Ko-Fi: https://ko-fi.com/masterx
• destream (100 EUR min): https://destream.net/live/MMX/donate
• cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
• YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
• USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
• BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
• ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
• XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
• TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n in - flipper-z-f7-update-unlshd-021n.tgz ? - that means this build comes without our custom animations, only official flipper animations

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-021.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater