-
-
Notifications
You must be signed in to change notification settings - Fork 1.2k
Description
macOS Version
26.0
What is the precise OS version on which the bug is occurring?
26.0
What is your CPU's model?
amd r5 5500u
Describe the unexpected behaviour in detail.
When HiDPI is enabled, the built-in eDP panel intermittently shows very thin black horizontal lines. They disappear as soon as I move the cursor—sometimes seeming to “follow” it—and then re-appear at random moments. (on Tahoe/Sequoia)And the fresh rate became weired.Rolling back to the previous public build removes the problem, so the regression appears confined to the latest commit.(Old version don’t support tahoe,only tested on sequoia)。On macOS Tahoe beta 1–3 I also observe occasional back-light pulsing on the internal display: brightness rises or falls for roughly two seconds, most often right after boot or immediately after waking from sleep. The same hardware and configuration do not exhibit this behaviour on macOS 15 Sequoia. Moreover,I find the latest build cause kernel panic on Monterey.I use the old version nootedred,and I it boot normally.But I can’t test it again because I have just updated it to sequoia. (My English is not good,some content is ai generated)
https://github.com/user-attachments/assets/efa625ef-d4e3-411c-aa84-7d578125cb74
https://github.com/user-attachments/assets/b31f236c-45b1-457a-84ae-76045828d30d
What should've happened instead?
Tahoe shows no back-light pulsing and no black lines.
Monterey no panic
Attach any logs related to this issue. For example .gpuRestart, .panic, etc files.
No response
Issue Submission Terms
- You have made sure that there are no other reports about this bug.
- You do not use configurator software (e.g. OpenCore Auxiliary Tools, OpenCore Configurator).
- You have made your own EFI according to the ChefKiss Hackintosh Guide.
- You are not using any software that may conflict, including, but not limited to, OpenCore Legacy Patcher, BFixup, WhateverGreen.
- You acknowledge that violation of these terms may result in your issue being closed or your user being blocked from the organisation.