Replies: 2 comments
-
|
刚才编译，依然错误： Applying ./patches/0001-rockchip-rk3568-add-boot-device-detection.patch using plaintext: Applying ./patches/0002-rockchip-rk3568-enable-automatic-power-savings.patch using plaintext: Applying ./patches/0004-arm-dts-sync-rk3568-with-linux.patch using plaintext: Applying ./patches/0005-rockchip-rk356x-HACK-fix-sdmmc-support.patch using plaintext: Applying ./patches/0007-gpio-rockchip-rk_gpio-support-v2-gpio-controller.patch using plaintext: Applying ./patches/0008-rockchip-allow-sdmmc-at-full-speed.patch using plaintext: Applying ./patches/001-scripts-remove-dependency-on-swig.patch using plaintext: Applying ./patches/0011-rockchip-rk356x-attempt-to-fix-ram-detection.patch using plaintext:
|
Beta Was this translation helpful? Give feedback.
-
|
至今不修复，没回应。 |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
R4S 编译通不过。
Applying ./patches/0007-gpio-rockchip-rk_gpio-support-v2-gpio-controller.patch using plaintext:
patching file arch/arm/include/asm/arch-rockchip/gpio.h
patching file drivers/gpio/Kconfig
Hunk #1 succeeded at 302 (offset -39 lines).
patching file drivers/gpio/rk_gpio.c
patching file drivers/pinctrl/rockchip/Makefile
Hunk #1 succeeded at 13 (offset -1 lines).
patching file drivers/pinctrl/rockchip/pinctrl-rk3568.c
patching file drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
patching file drivers/pinctrl/rockchip/pinctrl-rockchip.h
Applying ./patches/0008-rockchip-allow-sdmmc-at-full-speed.patch using plaintext:
patching file arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi
Applying ./patches/001-scripts-remove-dependency-on-swig.patch using plaintext:
patching file scripts/dtc/Makefile
Applying ./patches/0011-rockchip-rk356x-attempt-to-fix-ram-detection.patch using plaintext:
patching file arch/arm/mach-rockchip/rk3568/rk3568.c
patching file arch/arm/mach-rockchip/sdram.c
patching file common/board_f.c
Hunk #1 succeeded at 344 (offset -1 lines).
can't find file to patch at input line 152
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|--- a/configs/quartz64-a-rk3566_defconfig
|+++ b/configs/quartz64-a-rk3566_defconfig
No file to patch. Skipping patch.
1 out of 1 hunk ignored
patching file include/configs/rk3568_common.h
Hunk #1 succeeded at 27 (offset 3 lines).
Patch failed! Please fix ./patches/0011-rockchip-rk356x-attempt-to-fix-ram-detection.patch!
make[3]: *** [Makefile:173: /home/gswangmd/openwrt/build_dir/target-aarch64_generic_musl/u-boot-nanopi-r4s-rk3399/u-boot-2022.04/.prepared_fa5f4918a2f5ed51a95ddc8b514d46e8_6664517399ebbbc92a37c5bb081b5c53] Error 1
make[3]: Leaving directory '/home/gswangmd/openwrt/package/boot/uboot-rockchip'
time: package/boot/uboot-rockchip/nanopi-r4s-rk3399/compile#3.29#1.52#4.32
ERROR: package/boot/uboot-rockchip failed to build (build variant: nanopi-r4s-rk3399).
make[2]: *** [package/Makefile:116: package/boot/uboot-rockchip/compile] Error 1
make[2]: Leaving directory '/home/gswangmd/openwrt'
make[1]: *** [package/Makefile:110: /home/gswangmd/openwrt/staging_dir/target-aarch64_generic_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/gswangmd/openwrt'
make: *** [/home/gswangmd/openwrt/include/toplevel.mk:230: world] Error 2
gswangmd@WMD-HOME:~/openwrt$
Applying ./patches/0007-gpio-rockchip-rk_gpio-support-v2-gpio-controller.patch using plaintext:
patching file arch/arm/include/asm/arch-rockchip/gpio.h
patching file drivers/gpio/Kconfig
Hunk #1 succeeded at 302 (offset -39 lines).
patching file drivers/gpio/rk_gpio.c
patching file drivers/pinctrl/rockchip/Makefile
Hunk #1 succeeded at 13 (offset -1 lines).
patching file drivers/pinctrl/rockchip/pinctrl-rk3568.c
patching file drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
patching file drivers/pinctrl/rockchip/pinctrl-rockchip.h
Applying ./patches/0008-rockchip-allow-sdmmc-at-full-speed.patch using plaintext:
patching file arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi
Applying ./patches/001-scripts-remove-dependency-on-swig.patch using plaintext:
patching file scripts/dtc/Makefile
Applying ./patches/0011-rockchip-rk356x-attempt-to-fix-ram-detection.patch using plaintext:
patching file arch/arm/mach-rockchip/rk3568/rk3568.c
patching file arch/arm/mach-rockchip/sdram.c
patching file common/board_f.c
Hunk #1 succeeded at 344 (offset -1 lines).
can't find file to patch at input line 152
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|--- a/configs/quartz64-a-rk3566_defconfig
|+++ b/configs/quartz64-a-rk3566_defconfig
No file to patch. Skipping patch.
1 out of 1 hunk ignored
patching file include/configs/rk3568_common.h
Hunk #1 succeeded at 27 (offset 3 lines).
Patch failed! Please fix ./patches/0011-rockchip-rk356x-attempt-to-fix-ram-detection.patch!
make[3]: *** [Makefile:173: /home/gswangmd/openwrt/build_dir/target-aarch64_generic_musl/u-boot-nanopi-r4s-rk3399/u-boot-2022.04/.prepared_fa5f4918a2f5ed51a95ddc8b514d46e8_6664517399ebbbc92a37c5bb081b5c53] Error 1
make[3]: Leaving directory '/home/gswangmd/openwrt/package/boot/uboot-rockchip'
time: package/boot/uboot-rockchip/nanopi-r4s-rk3399/compile#3.29#1.52#4.32
ERROR: package/boot/uboot-rockchip failed to build (build variant: nanopi-r4s-rk3399).
make[2]: *** [package/Makefile:116: package/boot/uboot-rockchip/compile] Error 1
make[2]: Leaving directory '/home/gswangmd/openwrt'
make[1]: *** [package/Makefile:110: /home/gswangmd/openwrt/staging_dir/target-aarch64_generic_musl/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/gswangmd/openwrt'
make: *** [/home/gswangmd/openwrt/include/toplevel.mk:230: world] Error 2
gswangmd@WMD-HOME:~/openwrt$
Beta Was this translation helpful? Give feedback.
All reactions