Description

In order to be able to host a thicker USB-C connector we should modify the support for the OAK-D Lite and raise it about 5 mm from the PCB.

Additionally, in order to make the joint more stable the supports should be modified to host either 2.5mm or 3mm screws (the original parts are designed to use 2mm screws).

Additional Information

The original STL files provided by MangDang are shared under Shared Folder "MiniPupper2" on Google Drive (folder: 3DprintedParts)

• CameraBase.stl
• Camera.OAK-D-Lite.stl