Bug Protocoll after integration

[buma153]

I got this Bug Protocoll. It seems that something went wrong with the new hacs update. But I'm a newbie so that'y only my opinion in this case.

Hope you can help to solve this problem.

[Altrec]

It seems like there is missing some more lines at the end of the error. Could you please check this?

[NoMaamBtl]

I have the same Entry in Debug Protocol:

2025-02-12 12:04:53.027 WARNING (MainThread) [homeassistant.helpers.frame] Detected that custom integration 'remko_mqtt' sets option flow configxplicitly, which is deprecated at custom_components/remko_mqtt/config_flow.py, line 161: self.config_entry = config_entry. This will stop working in Home Assistant 2025.12, please create a bug report at https://github.com/Altrec/remko_mqtt-ha/issues
I have seen, that there are new Sensors in remko_regs.py. I have copied the new File (and the other new Files) in the Folder remko_mqtt, but none of the new Sensor is shown in HA in the Remko Integration.

Thank you, for your work!

[Altrec]

Could you provide some more information about your system? I just updated my dev environment which is now core 2025.3.0 and I don't get these warnings.

Regarding the new sensors:
Maybe your heat pump doesn't provide data for these sensors. I recently added a check so only relevant sensor are being set up.

[NoMaamBtl]

I use Homeassistant Green
Core 2025.2.2
Supervisor 2025.02.0
Operating System 14.2
Frontend 20250210.0

Remko LWM 150 with Software 4.28

The error above doesn't seem to have any further influence except that I can't see the new sensors, which doesn't necessarily have to be related to each other.

Register 5105 (energy_electric) has always value 0000080E.
Maybe for this Sensors the Smart Counter Funktion ist needed, which i didn't have actually, because i'm waiting for the reseller.

[mDobin746]

Hi guys, I seem to have a compareable issue, the protocoll entry is shown below. I have no clue, maybe there is something I need to customize to get it running?

I am using this configuration: Core 2025.2.4, Supervisor 2025.02.1, Operating System 14.2, Frontend 20250214.0. (I checked for available updates, but everything seems to be up to date)

My heatpump is a WKF NEO-compact 100, Software version is 4.28. MQTT Explorer is receiving messages from the device with a topic "V04P28/BROADCAST/PORTAL2HOST" and "V04P28/MAC/HOST2PORTAL"

Would be happy for your advise and thank you in advance for sharing your knowledge!

2025-02-17 17:41:30.084 INFO (MainThread) [custom_components.remko_mqtt] Set up Remko-MQTT integration
2025-02-17 17:41:30.084 INFO (MainThread) [custom_components.remko_mqtt] Set up Remko-MQTT integration entry remko
2025-02-17 17:41:30.085 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] INFO: remko_mqtt_remko mqtt_node: [V04P28]
2025-02-17 17:41:30.085 ERROR (MainThread) [custom_components.remko_mqtt.heatpump] INFO: MQTT Debug write enabled
2025-02-17 17:41:30.085 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] Language[1]
2025-02-17 17:41:30.085 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] topic:[V04P28/SMTID/CLIENT2HOST]
2025-02-17 17:41:30.085 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] payload:[{"FORCE_RESPONSE": "true", "query_list": "[1079,1082,1893,1894,1951,1972,1974,5001,5027,5032,5039,5051,5055,5085,5131,5320,5321,5693,communication_status]"}]
2025-02-17 17:42:18.187 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 184134.162813099}
2025-02-17 17:43:18.245 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 184134.162813099}
2025-02-17 17:44:18.303 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 184134.162813099}
2025-02-17 17:45:18.356 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 184134.162813099}
2025-02-17 17:46:18.412 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 184134.162813099}
2025-02-17 17:46:24.625 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry remko_mqtt_remko for remko_mqtt
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/config_entries.py", line 637, in __async_setup_with_context
result = await component.async_setup_entry(hass, self)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/config/custom_components/remko_mqtt/init.py", line 66, in async_setup_entry
await hass.async_create_task(heatpump.check_capabilities())
File "/config/custom_components/remko_mqtt/heatpump.py", line 171, in check_capabilities
reply = await future
^^^^^^^^^^^^
asyncio.exceptions.CancelledError: Global task timeout
2025-02-17 17:46:24.642 WARNING (MainThread) [homeassistant.bootstrap] Setup timed out for stage 2 waiting on set() - moving forward
2025-02-17 17:46:24.663 ERROR (MainThread) [homeassistant.core] Error running job: <Job onetime listen homeassistant_start <function _async_at_core_state.._matched_event at 0x7f7ad55b20> HassJobType.Callback <_OneTimeListener homeassistant.helpers.start:<function _async_at_core_state.._matched_event at 0x7f7ad55b20>>>
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/sensor/init.py", line 635, in state
numerical_value = int(value)
ValueError: invalid literal for int() with base 10: ''

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/sensor/init.py", line 638, in state
numerical_value = float(value)
ValueError: could not convert string to float: ''

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/core.py", line 1577, in async_fire_internal
self._hass.async_run_hass_job(job, event)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 1438, in call
self.hass.async_run_hass_job(self.listener_job, event)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/helpers/start.py", line 44, in _matched_event
hass.async_run_hass_job(at_start_job, hass)
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/template/template_entity.py", line 517, in _async_template_startup
result_info.async_refresh()
~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/event.py", line 1126, in async_refresh
self._refresh(None)
~~~~~~~~~~~~~^^^^^^
File "/usr/src/homeassistant/homeassistant/helpers/event.py", line 1312, in _refresh
self.hass.async_run_hass_job(self._job, event, updates)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/template/template_entity.py", line 463, in _handle_results
self.async_write_ha_state()
~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1023, in async_write_ha_state
self._async_write_ha_state()
~~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1148, in _async_write_ha_state
self.__async_calculate_state()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1085, in __async_calculate_state
state = self._stringify_state(available)
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1029, in _stringify_state
if (state := self.state) is None:
^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/sensor/init.py", line 642, in state
raise ValueError(
...<5 lines>...
) from err

[Altrec]

@mDobin746
Do you only receive the topics "V04P28/BROADCAST/PORTAL2HOST" and "V04P28/MAC/HOST2PORTAL"?
The integration is looking at "V04P28/SMTID/HOST2CLIENT" and doesn't seem to get any values. Therefore the setups doesn't finish. (As far as I understand the error messages correctly)

[mDobin746]

@Altrec
Thank you for your reply. I had an error on my heatpump this morning (7046) and had to restart the device. Since then there are three more topics 'V04P28/SMTID/PORTAL2CLIENT', 'V04P28/SMTID/HOST2CLIENT' and 'V04P28/SMTID/CLIENT2PORTAL'. I also restarted HA, but the integration still seems to wait for something. I will post the debug protocoll asap.

[mDobin746]

Here, as promissed before, the protocol (I deleted a few lines regarding another issue with my E3DC to shorten it a little bit, it is still long enough)

2025-02-18 10:54:00.212 ERROR (MainThread) [custom_components.remko_mqtt.heatpump] INFO: MQTT Debug write enabled
2025-02-18 10:54:52.873 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 246084.290495448}
2025-02-18 10:55:52.947 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 246084.290495448}
2025-02-18 10:56:53.019 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 246084.290495448}
2025-02-18 10:57:53.088 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 246084.290495448}
2025-02-18 10:58:53.155 WARNING (MainThread) [homeassistant.bootstrap] Waiting on integrations to complete setup: {('remko_mqtt', '01JM7TC7PMFMDPXFE4C4Q63Z85'): 246084.290495448}
2025-02-18 10:58:56.860 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry remko_mqtt_remko for remko_mqtt
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/config_entries.py", line 637, in __async_setup_with_context
result = await component.async_setup_entry(hass, self)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/config/custom_components/remko_mqtt/init.py", line 66, in async_setup_entry
await hass.async_create_task(heatpump.check_capabilities())
File "/config/custom_components/remko_mqtt/heatpump.py", line 171, in check_capabilities
reply = await future
^^^^^^^^^^^^
asyncio.exceptions.CancelledError: Global task timeout
2025-02-18 10:58:56.870 WARNING (MainThread) [homeassistant.bootstrap] Setup timed out for stage 2 waiting on set() - moving forward
2025-02-18 10:58:56.884 ERROR (MainThread) [homeassistant.core] Error running job: <Job onetime listen homeassistant_start <function _async_at_core_state.._matched_event at 0x7f826bbd80> HassJobType.Callback <_OneTimeListener homeassistant.helpers.start:<function _async_at_core_state.._matched_event at 0x7f826bbd80>>>
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/sensor/init.py", line 635, in state
numerical_value = int(value)
ValueError: invalid literal for int() with base 10: ''

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/components/sensor/init.py", line 638, in state
numerical_value = float(value)
ValueError: could not convert string to float: ''

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/core.py", line 1577, in async_fire_internal
self._hass.async_run_hass_job(job, event)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 1438, in call
self.hass.async_run_hass_job(self.listener_job, event)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/helpers/start.py", line 44, in _matched_event
hass.async_run_hass_job(at_start_job, hass)
~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/template/template_entity.py", line 517, in _async_template_startup
result_info.async_refresh()
~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/event.py", line 1126, in async_refresh
self._refresh(None)
~~~~~~~~~~~~~^^^^^^
File "/usr/src/homeassistant/homeassistant/helpers/event.py", line 1312, in _refresh
self.hass.async_run_hass_job(self._job, event, updates)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/core.py", line 940, in async_run_hass_job
hassjob.target(*args)
~~~~~~~~~~~~~~^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/template/template_entity.py", line 463, in _handle_results
self.async_write_ha_state()
~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1023, in async_write_ha_state
self._async_write_ha_state()
~~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1148, in _async_write_ha_state
self.__async_calculate_state()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1085, in __async_calculate_state
state = self._stringify_state(available)
File "/usr/src/homeassistant/homeassistant/helpers/entity.py", line 1029, in _stringify_state
if (state := self.state) is None:
^^^^^^^^^^
File "/usr/src/homeassistant/homeassistant/components/sensor/init.py", line 642, in state
raise ValueError(
...<5 lines>...
) from err
(...)
2025-02-18 10:59:54.263 INFO (MainThread) [custom_components.remko_mqtt] Set up Remko-MQTT integration entry remko
2025-02-18 10:59:54.264 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] INFO: remko_mqtt_remko mqtt_node: [V04P28]
2025-02-18 10:59:54.264 ERROR (MainThread) [custom_components.remko_mqtt.heatpump] INFO: MQTT Debug write enabled
2025-02-18 10:59:54.264 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] Language[1]
2025-02-18 10:59:54.266 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] topic:[V04P28/SMTID/CLIENT2HOST]
2025-02-18 10:59:54.266 DEBUG (MainThread) [custom_components.remko_mqtt.heatpump] payload:[{"FORCE_RESPONSE": "true", "query_list": "[1079,1082,1893,1894,1951,1972,1974,5001,5027,5032,5039,5051,5055,5085,5131,5320,5321,5693,communication_status]"}]
2025-02-18 11:23:48.405 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry remko_mqtt_remko for remko_mqtt
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/config_entries.py", line 637, in __async_setup_with_context
result = await component.async_setup_entry(hass, self)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/config/custom_components/remko_mqtt/init.py", line 66, in async_setup_entry
await hass.async_create_task(heatpump.check_capabilities())
File "/config/custom_components/remko_mqtt/heatpump.py", line 171, in check_capabilities
reply = await future
^^^^^^^^^^^^
asyncio.exceptions.CancelledError

[Altrec]

Did you configure the MQTT integration (not Remko MQTT) within Home Assistant?

[mDobin746]

The MQTT integration is running with the standard configuration I used before. Is there something that needs to be added or customized? If I listen to the topic V04P28/SMTID on the config page of the integration nothing happens (no incomming data).

[Altrec]

@mDobin746
What is the "standard configuration" of the MQTT integration you stated?
How did you configure the MQTT integration anyways?

[mDobin746]

@Altrec

This is the config page of my MQTT integration. I dont really know what is to do there. It is running since maybe two years this way and it is working with a sensor I use to check a fuel tank. This sensor is working properly.

[DDDJan]

The MQTT integration is running with the standard configuration I used before. Is there something that needs to be added or customized? If I listen to the topic V04P28/SMTID on the config page of the integration nothing happens (no incomming data).

Hope this helps, I'm new to MQTT and experienced similar behaviour when I tried to use the remko_mqtt integration.

I got it working when I added connectionfile /shares/mosquitto/remko_mqtt.conf with contents:
connection Remko_MQTT
address <ip-address_of_your_heatpump>
remote_username 0000000000000000
remote_password <the_password_found_in_the_smt.min.js_file_of_the_webinterface>

Don't forget to enable Customize (set it to true) in the Mosquitto configuration.

[jvdsanden1]

Does anybody know what need to be filled in this popup screen when integrating "Remko mqtt integration" ?

And where I can find the requested information?

Thanks